BC22AAW, 规格书,Datasheet 资料
埃森平台 MW 系列微型电路保护器说明书
Protective Devices Miniature Circuit Breakers PLN4Catalog1.11EATON CORPORATION CA019074ENProtective DevicesMiniature Circuit Breakers PLN4 (MW)• T op-quality miniature circuit breakers 1P+N with a width of 1 module unit requiring little space for installation• Contact position indicator red - green • Guide for secure terminal connection • C omprehensive range of accessories can be mounted subsequently • Rated currents up to 40 A • Tripping characteristics B, C• R ated breaking capacity 4.5 kA according to IEC/EN 60898-1DescriptionSG157112EATON CORPORATION CA019074EN 3EATON CORPORATION CA019074ENSpecifications | Miniature Circuit Breakers PLN6, PLN4Description• High selectivity between MCB and back-up fuse due to low let-through energy • B usbar positioning optionally above or below • Compatible with standard busbar• Switching toggle in colour designating the rated current • M eets the requirements of insulation co-ordination, distance between con-tacts ³ 4 mm, for secure isolation • 1-pole breaking capacityI cn 1 = 3 kA Accessories:Auxiliary switch for subsequent installation ZP-IHK 286052ZP-WHK 286053Tripping signal switch for subsequent installation ZP-NHK 248437Remote control and automatic switching device Z-FW/LP 248296Shunt trip release ZP-ASA/..248438, 248439Undervoltage releaseZ-USA/..248288-248291Busbars:see capter busbar systemsTechnical DataPLN6, PLN4ElectricalDesign according toCurrent test marks as printed onto the device IEC/EN 60898-1Rated voltage U n 230 VAC Rated frequency50/60 Hz Rated breaking capacity according to IEC/EN 60898-1I cnPLN6 6 kA PLN4 4.5 kA Characteristic B, CBack-up fuse>6 kA max. 100 A gL/gG >4.5 kA max. 80 A gL/gG Selectivity class3Endurance electrical components ³ 8,000 switching operationsMechanical Frame size 45 mm Device height 80 mmDevice width 17.5 mm (1MU for 1+N)Mountingquick fastening with 2 lock-in positions on DIN rail IEC/EN 60715Degree of protectionIP20Upper and lower terminals open-mouthed/lift terminalsTerminal protection finger and hand touch safe, DGUV VS3, EN 50274Terminal capacity1-16 mm 2Connection diagram1+N-poleDimensions (mm)Rated current I n (A)TypeDesignationArticle No.Units per package4.5 kA, Characteristic BSG157116PLN4-B6/1N 26317912/12010PLN4-B10/1N 26318012/12013PLN4-B13/1N 26318112/12016PLN4-B16/1N 26318212/12020PLN4-B20/1N 26318312/12025PLN4-B25/1N 26318412/12032PLN4-B32/1N 26318512/12040PLN4-B40/1N26318612/1201+N-pole4.5 kA, Characteristic CSG157116PLN4-C6/1N 26318912/12010PLN4-C10/1N 26319012/12013PLN4-C13/1N 26319112/12016PLN4-C16/1N 26319212/12020PLN4-C20/1N 26319312/12025PLN4-C25/1N 26319412/12032PLN4-C32/1N 26319512/12040PLN4-C40/1N26319612/1201+N-pole Explanation PLN4:P = xPole , LN = Miniature Circuit Breakers 1P+N, 1MU , 4 = 4.5 kA4EATON CORPORATION CA019074EN5EATON CORPORATION CA019074ENShort-circuit Selectivity PLN4In case of short-circuit, there is selectivity between the miniature circuit breakers PLN4 and the upstream fuses up to the specified values of the selectivity limit current I s [kA] (i. e. in case of short-circuit currents I ks under I s only the MCB will trip, in case of short-circuit currents above this value both protective devices will respond).*) basically in accordance with EN 60898-1 D.5.2.bShort-circuit selectivity Characteristic B towards fuse link DII-DIV *)Short-circuit selectivity Characteristic C towards fuse link DII-DIV *)PLN4DII-DIV gL/gG I n [A]20253550638010060.7 1.2 2.9 4.52) 4.52) 4.52) 4.52)100.60.9 1.9 3.1 4.52) 4.52) 4.52)130.50.7 1.5 2.5 4.52) 4.52) 4.52)160.50.7 1.4 2.3 4.3 4.52) 4.52)200.50.7 1.4 2.2 4.0 4.52) 4.52)250.50.6 1.3 2.0 3.8 4.52) 4.52)320.50.6 1.2 1.8 3.4 4.52) 4.52)40<0.51)0.61.1 1.7 3.1 4.52) 4.52)Short-circuit selectivity Characteristic B towards fuse link D01-D03*)Short-circuit selectivity Characteristic C towards fuse link D01-D03*)PLN4DII-DIV gL/gG I n [A]2025355063801002 1.5 3.8 4.52) 4.52) 4.52) 4.52) 4.52)40.7 1.2 3.3 4.52) 4.52) 4.52) 4.52)60.7 1.1 2.6 4.52) 4.52) 4.52) 4.52)100.50.8 1.7 2.8 4.52) 4.52) 4.52)130.50.7 1.5 2.5 4.52) 4.52) 4.52)160.50.6 1.2 2.0 3.6 4.52) 4.52)200.50.61.2 1.8 3.3 4.52) 4.52)25<0.51)0.6 1.1 1.7 3.0 4.52) 4.52)32<0.51)0.6 1.0 1.6 2.8 4.52) 4.52)40<0.51)0.6 1.0 1.5 2.6 4.0 4.52)PLN4D01-D03 gL/gG I n [A]20253550638010060.60.9 2.5 4.52) 4.52) 4.52) 4.52)100.50.8 1.6 3.4 4.52) 4.52) 4.52)130.50.7 1.3 2.7 4.0 4.52) 4.52)160.50.6 1.3 2.5 3.8 4.52) 4.52)20<0.51)0.61.32.43.64.52) 4.52)25<0.51)0.6 1.2 2.3 3.3 4.52) 4.52)32<0.51)0.6 1.1 2.1 3.0 4.52) 4.52)40<0.51)0.6 1.0 2.0 2.8 4.52) 4.52)PLN4D01-D03 gL/gG I n [A]2025355063801002 1.1 2.0 4.52) 4.52) 4.52) 4.52) 4.52)40.60.9 2.7 4.52) 4.52) 4.52) 4.52)60.60.9 2.3 4.52) 4.52) 4.52) 4.52)100.50.7 1.5 3.0 4.52) 4.52) 4.52)130.50.71.32.7 4.0 4.52) 4.52)16<0.51)0.6 1.1 2.23.14.52) 4.52)20<0.51)0.6 1.1 2.1 2.9 4.52) 4.52)25<0.51)0.5 1.0 2.0 2.7 4.52) 4.52)32<0.51)0.5 1.0 1.9 2.6 4.52) 4.52)40<0.51)0.50.9 1.7 2.3 4.0 4.52)1) Selectivity limit current I sunder 0.5 kA2) S electivity limit current I s = rated breaking capacity I cn of the MCBShort-circuit selectivity Characteristic B towards fuse link NH-00*)Short-circuit selectivity Characteristic C towards fuse link NH-00*)PLN4NH-00 gL/gG I n [A]202532354050638010060.50.91.52.33.24.52) 4.52) 4.52) 4.52)10<0.51)0.7 1.2 1.5 2.0 3.1 3.9 4.52) 4.52)13<0.51)0.6 1.0 1.3 1.7 2.5 3.1 4.52) 4.52)16<0.51)0.6 1.0 1.3 1.6 2.4 2.9 4.52) 4.52)20<0.51)0.50.9 1.3 1.5 2.3 2.8 4.3 4.52)25<0.51)0.50.9 1.1 1.4 2.1 2.6 4.0 4.52)32<0.51)0.50.8 1.0 1.3 1.9 2.4 3.6 4.52)40<0.51)0.50.80.9 1.1 1.7 2.2 3.3 4.52)PLN4NH-00 gL/gG I n [A]202532354050638010020.7 2.1 4.52) 4.52) 4.52) 4.52) 4.52) 4.52) 4.52)40.50.9 1.6 2.6 3.7 4.52) 4.52) 4.52) 4.52)60.50.8 1.4 2.1 2.9 4.52) 4.52) 4.52) 4.52)10<0.51)0.6 1.0 1.4 1.9 2.8 3.5 4.52) 4.52)13<0.51)0.60.9 1.3 1.7 2.5 3.1 4.52) 4.52)16<0.51)0.50.7 1.0 1.3 2.0 2.5 3.8 4.52)20<0.51)0.50.70.9 1.2 1.8 2.3 3.5 4.52)25<0.51)0.50.70.9 1.1 1.6 2.1 3.3 4.52)32<0.51)<0.51)0.60.8 1.1 1.5 2.0 3.1 4.52)40<0.51)<0.51)0.60.8 1.0 1.4 1.9 2.9 4.52)Load Capacity PLN4Let-through Energy PLN4Determined according to 60898-1.Maximum let-through energy PLN4, Characteristic BMaximum let-through energy PLN4, Characteristic CLoad capacity in case of MCB block installationCurrent carrying capacity at ambient temperature (I n = 2-13 A)Permitted permanent load at ambient temperature T (°C) with n devices: I DL = I n K T (T)K N (N).Current carrying capacity at ambient temperature (I n = 16-25 A)Current carrying capacity at ambient temperature (I n = 32, 40 A)Number of devices (n)L o a d c a p a c i t y f a c t o r K N500300500100015002000300040005000600070001000015000800090004009007008006001500100030002000500040002000090007000100008000600015000300005000060000400007000080000prospektiver Kurzschlußstrom [A]D u r c h l a ße n e r g i e I t [A s e c ]22prospektiver Kurzschlußstrom [A]D u r c h l a ße n e r g i e I t [A s e c ]22500300500100015002000300040005000600070001000015000800090004009007008006001500100030002000500040002000090007000100008000600015000300005000060000400007000080000Prospective short-circuit current [A]L e t t h r o u g h e n e r g y I 2t [A 2 s e c ]Prospective short-circuit current [A]L e t t h r o u g h e n e r g y I 2t [A2 s e c ]EatonEMEA Headquarters Route de la Longeraie 71110 Morges, Switzerland Eaton.eu© 2020 EatonAll Rights Reserved Printed in AustriaPublication No. CA019074EN Article number 302799-MK July 2023Grafics: SRA, Schrems9010238178694Eaton Industries (Austria) GmbH Scheydgasse 421210 Vienna AustriaFollow us on social media to get the latest product and support information.Eaton is a registered trademark.All other trademarks are property of their respective owners.To contact us please visit https:///contacts For technical questions please contact your local Eaton team.Changes to the products, to the information contained in thisdocument, and to prices are reserved; as are errors and omissions.Only order confirmations and technical documentation by Eaton is binding. Photos and pictures also do not warrant a specific layout or functionality. Their use in whatever form is subject to prior approval by Eaton. The same applies to trademarks (especially Eaton, Moeller,and Cutler-Hammer). The Terms and Conditions of Eaton apply, as referenced on Eaton Internet pages and Eaton order confirmations.Eaton is an intelligent power management company dedicated toimproving the quality of life and protecting the environment for people everywhere. We are guided by our commitment to do business right, to operate sustainably and to help our customers manage power - today and well into the future. By capitalizing on the global growth trends of electrification and digitalization, we’re accelerating the planet’s transition to renewable energy, helping to solve the world’s most urgent power management challenges, and doing what’s best for our stakeholders and all of society.For more information, visit .。
卡萨帝冰箱 BCD-279WGCC2B6W9U1说明书
冰箱使用说明书型号BCD-279WGCC2B6W9U1• 本说明书为通用手册• 本公司保留说明书解释权• 产品外观请以实物为准• 阅后请与发票一并妥善保存• 如遇产品技术或软件升级，恕不另行通知• 本产品只适合在中国大陆销售和使用1. 产品介绍1 1.1. 产品部件1 1.1.1. 部件介绍1 1.1.2. 装箱单1 1.2. 技术规格2 1.2.1. 技术数据21.2.2. 产品尺寸及安装要求32. 使用说明6 2.1. 安全注意事项6 2.1.1. 符号含义6 2.1.2. 电气6 2.1.3. 使用6 2.1.4. 维护6 2.2. 冰箱安装7 2.2.1. 准备步骤7 2.2.2. 初次使用步骤7 2.2.3. 安装说明7 2.3. 冰箱操作19 2.3.1. 显示屏19 2.3.2. 冷藏20 2.3.3. 冷冻21 2.3.4. 智能22 2.3.5. 互联功能23 2.4. 食品贮存注意事项24 2.4.1. 贮存建议区间24 2.4.2. 冷藏室25 2.4.3. 冷冻室29 2.4.4. 节能32 2.5. 清洁保养33 2.5.1. 冰箱清洁332.5.2. 搬运/停用333. 售后服务36 3.1. 疑难解答36 3.1.1. 结露36 3.1.1.1. 冰箱外部的水珠？36 3.1.1.2. 冰箱内部的水珠？36 3.1.2. 制冷36 3.1.2.1. 冰箱不工作363.1.2.2. 冰箱的制冷效果差？36 3.1.2.3. 冰箱的冷藏室、抽屉的食品冻住了？36 3.1.2.4. 冰箱压缩机的工作时间?37 3.1.3. 发热37 3.1.3.1. 冰箱外壳的温度？37 3.1.4. 异声37 3.1.4.1. 冰箱启动时发出较大的“ 嗡嗡”声音?37 3.1.4.2. 工作的声音经常提高37 3.1.4.3. 冰箱在开停机时发出“嗒嗒”声？37 3.1.4.4. 冰箱有水流声和水煮沸声37 3.1.4.5. 冰箱在工作时发出“啪啪”声？37 3.1.4.6. 冰箱在工作时有轻微吹风声？38 3.1.4.7. 冰箱在工作时有“咝咝”声或“嗤嗤”声？38 3.1.4.8. 冰箱在工作时噪音大？38 3.1.4.9. 冷藏室后壁结霜严重？38 3.1.5. 异味38 3.1.5.1. 冰箱内有异味38 3.1.6. 环境温度低38 3.1.6.1. 环境温度低时的使用38 3.2. 环保清单39 3.3. 保修说明391. 产品介绍1.1. 产品部件1.1.1. 部件介绍部件介绍如需增大储存空间，用户可以通过拆卸冰箱的部分部件，达到增大冰箱储存的目的1.1.2. 装箱单装箱单编号部件名称是否可拆卸①主控制屏否②普通搁物架是③果菜盒是④抽屉盖板否⑤低氧窖藏养鲜抽屉是⑥冷冻托盘是⑦冷冻中抽屉是⑧冷冻下抽屉是⑨小瓶座是⑩大瓶座是附件袋总成本产品因不断研究改进，保留冰箱各部件的变更权利，恕不另行通知，敬请谅解1.2. 技术规格1.2.1. 技术数据名称型号/数量型号BCD-279WGCC2B6W9U1附件袋总成1普通搁物架2冷藏抽屉盖板2原味恒鲜抽屉1低氧窖藏养鲜抽屉1小瓶座2大瓶座1冷冻托盘1冷冻中抽屉1冷冻下抽屉1间隙调节板4柜体间隙装饰条1上垫板1上固定板端盖4下固定板4下固定板盖4底部固定件总成1螺钉40螺钉孔盖2螺钉孔塞8型号BCD-279WGCC2B6W9U1星级标志气候类型SN.N.ST.T 型防触电保护类别I 类总容积279L 冷冻室容积88L 额定电压220V~根据国家标准GB/T 8059的要求，气候类型为SN.N.ST型时，冰箱使用环境温度为10～38℃；气候类型为SN.N.ST.T型时，冰箱使用环境温度为10～43℃。
美的 MRC-225W 双门冰箱 使用说明书
SJ-FTF23AVP-BK SJ-FX660S-BK
Refrigerant: R600a Insulation blowing gas: Cyclopentane 冷媒種類 :R600a 絕緣發泡材主要成份 : 環戊烷
Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefit from it. • This refrigerator is intended for making ice cubes, refrigerating and freezing food.
directly. Do not use an extension cord or adapter plug. ■■Connect the power plug to the socket with the required
rated voltage. ■■Connect the earth pin to the earth terminal properly.
• This refrigerator is for household use only, with ambient temperature indicated in the table. The climate class is specified on the rating plate. The refrigerator is fully functional at the ambient temperature range of the indicated climate class. If the refrigerator is used at colder temperatures, the refrigerator will not be damaged up to a temperature ;10°C to 32°C
FMB2222A;中文规格书,Datasheet资料
Thermal Characteristics
Symbol
PD RθJA
TA = 25°C unless otherwise noted
Characteristic
Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient Effective 4 Die Each Die FFB2222A 300 2.4 415
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
Spice Model
NPN (Is=14.34f Xti=3 Eg=1.11 Vaf=74.03 Bf=255.9 Ne=1.307 Ise=14.34f Ikf=.2847 Xtb=1.5 Br=6.092 Nc=2 Isc=0 Ikr=0 Rc=1 Cjc=7.306p Mjc=.3416 Vjc=.75 Fc=.5 Cje=22.01p Mje=.377 Vje=.75 Tr=46.91n Tf=411.1p Itf=.6 Vtf=1.7 Xtf=3 Rb=10)
300
VCE(sat) VBE(sat)
Collector-Emitter Saturation Voltage* Base-Emitter Saturation Voltage*
0.3 1.0 1.2 2.0
V V V V
SMALL SIGNAL CHARACTERISTICS
fT Cobo Cibo NF Current Gain - Bandwidth Product Output Capacitance Input Capacitance Noise Figure IC = 20 mA, VCE = 20 V, f = 100 MHz VCB = 10 V, IE = 0, f = 100 kHz VEB = 0.5 V, IC = 0, f = 100 kHz IC = 100 µA, VCE = 10 V, RS = 1.0 kΩ, f = 1.0 kHz 300 4.0 20 2.0 MHz pF pF dB
IM-220AA IM-220AWA L1M028306 (022022)商用组合式方冰制冰机使用说
中文
注意
拆除运输包装纸箱、胶带和其它包装材料。 如果内部遗留包装材料，制冰机将无法正常工作。
注：
本制冰机需使用储冰箱。 星崎推荐使用下列储冰箱： B301SA-------------IM-220AA B501SA (带顶部套件8D)--IM-220AA B801SA (带顶部套件4DM) IM-220AA x 2
5) 撕掉外表面的塑料防护膜。 如果制冰机暴露于阳光下或热源下，请待制冰机冷却后再撕掉塑料防护膜。
a) 前盖板 ：
b) 顶面板 ：
c) 后面板 ： d) 侧面板 ：
拆下螺钉。 将前面板 上提并向外拉动。 提起前面板，并滑入后 侧以松开后部的挂钩。 拆下螺钉，取下后面板。 拆下螺钉，取下侧面板。
储冰控制 开关
将冰槽置于制冰机边框中，然后将排水盘装回原位。 9) 将制冰机面板装回原位。
4
安装托架
制冰机
带垫 密封圈 排水盘
中文
冰槽 制冰机边框
六角头螺栓 垫圈(附件)
尼龙索
安装边框 储冰控制开关
6. 电气连接
警告
本制冰机必须接地 本制冰机必须按所在国家和地区的电气安全标准进行接地。
监督和指导。 * 另外还应对幼童加以看管，以确保其不玩耍本产品。 * 请勿尝试改装制冰机。 应仅由具备相应知识的作业人员实施拆解或维修作业。
1
中文
I. 安装说明 1. 构造
顶板 前盖板 储冰箱门
把手 储冰箱
电源线 通风窗、空气过滤网
可调节支脚
2. 附件
使用说明书
1
进水软管
1
排水软管
1
安装托架
2
带垫圈六角头螺栓
* 通常情况下，应由持有电工资质证书或经授权的维修人员进行作业。
布克炸锅 HFW、HFWB、HFWS 产品说明书
WHAT IS COVERED WHO IS COVERED COVERAGE PERIOD
WARRANTY COVERAGE EXCEPTIONS EXCLUSIONS
INSTALLATION REPLACEMENT PARTS
This warranty covers defects in material and workmanship under normal use, and applies only to the original purchaser providing that:
Leveling, as well as proper installation and check out of all new equipment per appropriate installation and use materials – is the responsibility of the dealer or installer, not the manufacturer.
The equipment has not been accidentally or intentionally damaged, altered or misused; The equipment is properly installed, adjusted, operated and maintained in accordance with national and local codes, and in accordance with the installation and operating instructions provided with this product. The serial number rating plate affixed to the equipment has not been defaced or removed.
布朗海斯5炉类商品说明书
800 Series, Gas Freestanding Range,36'', Black stainless steelHGS8645UC Optional accessoriesHEZ8YZ04UC : Side Panel Extension Kit Range - BSS HEZ8YZ36UC : Range Low Back Guard 36" BSS Models HEZ8ZZ36UC : Range Island Trim Ext. 36" BSS Models HEZ9GR41UC : Griddle HEZ9GW23UC : Wok RingThe Bosch industrial-style range combines a commercial look with powerful features that are designed to perform.Bosch black stainless helps guard against scratches and fingerprints to maintain its bold look.Dampened hinges softly and quietly guide the door shut.With a special enameling process, the grates can be easily cleaned in the dishwasher.Continuous grate design to easily move heavy pots and pans.Technical DataTotal number of cooktop burners : 6Cooking mode :Circulating air, Gas bottom heating, Gas grill/broiler Integrated Cleaning system : Catalytic partial Type of control : mechanical Knob Material : Full metal Sealed Burners : Yes Number of Double grates : 3Number of gas burners : 6Location of 1st heating element : front left Power of 1st burner (BTU) : 18000Location of 2nd heating element : center left Location of 3rd heating element : back left Power of 3rd burner (BTU) : 5000Location of 4th heating element : middle back Power of 4th burner (BTU) : 10000Location of 5th heating element : back right Power of 5th burner (BTU) : 10000Location of 6th heating element : center right Safety device : Safety valve UPC code : 825225960966Gas type : Natural gas 15 mbar (USA)Natural Gas Connection Rating (BTU) : 94000Current (A) : 15Volts (V) : 120Frequency (Hz) : 60Approval certificates : ETL : 36" width slide-in Overall appliance dimensions (HxWxD) (in) :36" x 35 15/16" x 24 14/16"Variable cooker height (in) : 1"Product packaging dimensions (HxWxD) (in) :34 1/16" x 38 3/4" x 28": 211Gross weight (lbs) : 234.0001/3800 Series, Gas Freestanding Range, 36'',Black stainless steelHGS8645UCThe Bosch industrial-style range combines acommercial look with powerful features thatare designed to perform.Design-Black porcelain-enameled cooking surface-Low-profile design for an integrated appearance-Heavy-duty metal knobs for a premium look and feel-Superior quality stainless steel exterior finishPerformance-Dual flame power burner-Standard convectionConvenience-6 Burners adding more flexibility to your cooking-Heavy-duty grates can be cleaned in dishwasher-Oven light to better monitor cooking progress-Kitchen timer-Extra large door window for easy monitoring of cookingprocess-LP conversion kit included for conversion from natural gas toliquid propaneCapacity-Capacity at 3.5 cu ft.2/3800 Series, Gas Freestanding Range, 36'',Black stainless steelHGS8645UC3/3。
各国电源线标准
中国标准电源插头227IEC42(RVB)2×0.5mm² 6A250V227IEC42(RVB)2×0.75mm² 6A250V227IEC52(RVV)2×0.5mm² 6A250V227IEC52(RVV)2×0.75mm² 6A250V227IEC52(RVV) 2×0.75mm² 6A250V227IEC53(RVV) 2×0.75mm² 6A250V227IEC53(RVV) 2×1.0mm²10A250V227IEC42(RVB)2×0.5mm²6A250V227IEC42(RVB)2×0.75mm²6A250V227IEC52(RVV)2×0.5mm²6A250V227IEC52(RVV)2×0.75mm²6A250V227IEC52（RVV）3×0.5mm² 6A250V227IEC52（RVV）3×0.75mm² 6A250V227IEC53（RVV）3×0.75mm² 6A250V227IEC53（RVV）3×1.0mm² 10A250V227IEC52（RVV）3×0.5mm²6A250V227IEC52（RVV）3×0.75mm²6A250V227IEC53（RVV）3×0.75mm²6A250V227IEC53（RVV）3×1.0mm²10A250V227IEC52（RVV）3×0.5mm²6A250V227IEC52（RVV）3×0.75mm²6A250V227IEC53（RVV）3×0.75mm²6A250V227IEC53（RVV）3×1.0mm²10A250VRX 300/300V 3×0.75mm²6A250VRX 300/300V 3×1.0mm²10A250V欧洲标准电源插头.H03VVH2 -F2X0.5mm²10/16A250VH03VVH2 -F2X0.75mm²10/16A250VH03VV-F2X0.5mm²10/16A250VH03VV-F2X0.75mm²10/16A250VH05VVH2 -F2X0.75mm²10/16A250VH05VVH2 -F2X1.0mm²10/16A250VH05VV-F2X0.75mm²10/16A250VH05VV-F2X1.0mm²10/16A250VH03VVH2 -F2X0.5mm² 2.5A250VH03VVH2 -F2X0.75mm² 2.5A250VH03VV-F2X0.5mm² 2.5A250VH03VV-F2X0.75mm² 2.5A250VH05VVH2 -F2X0.75mm²10A250VH05VVH2 -F2X1.0mm²10A250VH05VV-F2X0.75mm²10A250VH05VV-F2X1.0mm²10A250VH03VVH2 -F2X0.5mm² 2.5A250VH03VVH2 -F2X0.75mm² 2.5A250VH03VV-F2X0.5mm² 2.5A250VH03VV-F2X0.75mm² 2.5A250VH05VVH2 -F2X0.75mm²10A250VH05VVH2 -F2X1.0mm²10A250VH05VV-F2X0.75mm²10A250VH05VV-F2X1.0mm²10A250VH03VV-F3G0.5mm²10/16A250V H03VV-F3G0.75mm²10/16A250V H05VV-F3G0.75mm²10/16A250V H05VV-F3G1.0mm²10/16A250V H05VV-F3G1.5mm²10/16A250VH03VV-F3G0.5mm²10/16A250V H03VV-F3G0.75mm²10/16A250V H05VV-F3G0.75mm²10/16A250V H05VV-F3G1.0mm²10/16A250V H05VV-F3G1.5mm²10/16A250VH03VV-F3G0.5mm²10A250VH03VV-F3G0.75mm²10A250VH05VV-F3G0.75mm²10A250VH05VV-F3G1.0mm²10A250VH03VV-F3G0.5mm²10A250VH03VV-F3G0.75mm²10A250VH05VV-F3G0.75mm²10A250VH05VV-F3G1.0mm²10A250V227IEC52(RVV)3X0.75mm²10A250V227IEC53(RVV)3X0.75mm²10A250V227IEC53(RVV)3X1.0mm²10A250VH03VV-F3G0.75mm²6A250VH05VV-F3G0.75mm²10A250VH05VV-F3G1.0mm²10A250V227IEC52(RVV)3X0.75mm²10A250V227IEC53(RVV)3X0.75mm²10A250V227IEC53(RVV)3X1.0mm²10A250VH03VV-F3G0.75mm²6A250VH05VV-F3G0.75mm²10A250VH05VV-F3G1.0mm²10A250V澳大利亚标准电源插头SAAH05VVH2 -F2X0.75mm²7.5A250VH05VV-F2X0.75mm²7.5A250VH05VV-F2X1.0mm²10A250VH05VVH2-F2X0.75mm²7.5A250V H05VV-F2X0.75mm²7.5A250V H05VV-F2X1.0mm²10A250VH05VV-F3G0.75mm²7.5A250VH05VV-F3G1.0mm²10A250VH05VV-F3G1.5mm²15A250V美国标准电源插头C-ULSPT-118AWG/2CSPT-218AWG/2CSPT-216AWG/2CSPT-318AWG/2CSPT-316AWG/2CSVT18AWG/2CSVT17AWG/2CNISPT-118AWG/2C NISPT-218AWG/2CSVT18AWG/2CSVT17AWG/2CST18AWG/2CST16AWG/2CSJT18AWG/2CSJT16AWG/2C NISPT-118AWG/2C NISPT-218AWG/2CSVT18AWG/2CSVT17AWG/2CSVT18AWG/2C(齿形) SVT17AWG/2C(齿形) ST18AWG/2CST16AWG/2CSPT-118AWG/3CSPT-218AWG-16AWG/3CSPT-318AWG-16AWG/3CSVT18AWG- 17AWG/3CSVT18AWG-17AWG/3C(齿形)ST18AWG-16AWG/3CSJT 18AWG-16AWG/3CSVT18AWG/3CSVT17AWG/3CSVT18AWG/3C(齿形)SVT17AWG/3C(齿形)ST18AWG/3CST16AWG/3CSJT 16AWG/3CSJT 18AWG/3C日本标准电源插头VFF2X0.75mm²7A125VVCTF2X0.75mm²7A125VVCTFK2X0.75mm²7A125V以色列南非英国电源插头H03VV-F3G0.75mm²H05VV-F3G0.75mm²H05VV-F3G1.0mm²H05VV-F3G1.5mm²H03VV-F3G0.75mm²H05VV-F3G0.75mm²H05VV-F3G1.0mm²H05VV-F3G1.5mm²H03VV-F3G0.5mm²H03VV-F3G0.75mm²H05VV-F3G0.75mm²H05VV-F3G1.0mm²H05VV-F3G1.5mm²认证国家名称代号认证国家简称认证标志认证机构中国CCEE中国电工认证委员会欧洲CENELEC欧洲电气标准委员会欧洲CEE欧洲电气机器统一安全规格委员会德国VDE德国电气技术者协会荷兰KEMA荷兰电气标准德国TUV德国莱茵技术监督协会瑞士SEV瑞士电器标准瑞典SEMKO瑞典电器标准挪威NEMKO挪威电气机器试验所丹麦DEMKO丹麦电气机器试验所芬兰SFS芬兰电气机械标准奥地利OVE奥地利电气机械标准比利时NBN比利时电气用品标准意大利IMQ意大利家电机器试验所法国NF法国国家标准澳洲SAA澳洲国家标准协会美国UL美国保险协会实验室加拿大CSA加拿大标准协会日本T-MARK日本电器标准英国BS英国规格协会欧洲标准电源线·标准:DIN VDE0281·型号:H03VVH2-F H03VV-FH05VVH2-F H05VV-F·额定电压:H03 300/300VH05 300/500V·应用:H03型适用小功率家用电器、电动工具及动力照明等。
BCX51 52 53 PNP中间功率导电器SOT89数据手册说明书
Features• BV CEO > -45V, -60V & -80V• I C = -1A Continuous Collector Current • I CM = -2A Peak Pulse Current• Low Saturation Voltage V CE(sat) <************• Gain Groups 10 and 16• Complementary NPN Types: BCX54, 55, and 56• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) • Halogen- and Antimony-Free. "Green" Device (Note 3)•For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAPcapable, and manufactured in IATF 16949 certified facilities),please contact us or your local Diodes representative.https:///quality/product-definitions/Mechanical Data• Case: SOT89• Case Material: Molded Plastic, “Green” Molding Compound; UL Flammability Rating 94V-0• Moisture Sensitivity: Level 1 per J-STD-020•Terminals: Matte Tin Finish Leads; Solderable per MIL-STD-202 Method 208•Weight: 0.052 grams (Approximate)Applications • Medium Power Switching or Amplification Applications • AF Driver and Output StagesOrdering Information (Note 4)Product Compliance Marking Reel Size (inches)Tape Width (mm)Quantity per ReelBCX51TA Standard AA 7 12 1,000 BCX51-13R Standard AA 13 12 4,000 BCX5110TA Standard AC 7 12 1,000 BCX5116TA Standard AD 7 12 1,000 BCX5116TC Standard AD 13 12 4,000 BCX52TA Standard AE 7 12 1,000 BCX5210TA Standard AG 7 12 1,000 BCX5216TA Standard AM 7 12 1,000 BCX53TA Standard AH 7 12 1,000 BCX5310TA Standard AK 7 12 1,000 BCX5316TA Standard AL 7 12 1,000 BCX5316TC Standard AL 13 12 4,000 BCX5316-13R Standard AL 13 12 4,000 BCX5110TC Standard AC 13 12 4,000 BCX51TC Standard AA 13 12 4,000 BCX5210TC Standard AG 13 12 4,000 BCX5216TC Standard AM 13 12 4,000 BCX52TC Standard AE 13 12 4,000 BCX5310TC Standard AK 13 12 4,000 BCX53TCStandardAH13124,000Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant.2. See https:///quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.4. For packaging details, go to our website at https:///design/support/packaging/diodes-packaging/.Top View Device SymbolTop View Pin-Out SOT89E C BMarking InformationAbsolute Maximum Ratings (@ T A = +25°C, unless otherwise specified.)CharacteristicSymbol BCX51 BCX52 BCX53 Unit Collector-Base Voltage V CBO -45 -60 -100 V Collector-Emitter Voltage V CEO -45-60 -80V Emitter-Base Voltage V EBO -5 V Continuous Collector CurrentI C -1 A Peak Pulse Collector Current (Single pulse) I CM -2 Continuous Base CurrentI B -100 mAPeak Pulse Base Current (Single pulse) I BM-200Thermal Characteristics (@ T A = +25°C, unless otherwise specified.)CharacteristicSymbol Value Unit Power Dissipation(Note 5) P D1 W(Note 6) 1.5 (Note 7) 2.0 Thermal Resistance, Junction to Ambient Air (Note 5) R θJA 125 °C/W (Note 6) 83 (Note 7)60 Thermal Resistance, Junction to Lead (Note 8) R θJL 13 °C/W Thermal Resistance, Junction to Case (Note 9)R θJC 27 °C/W Operating and Storage Temperature Range T J, T STG-55 to +150°CESD Ratings (Note 10)CharacteristicSymbol Value Unit JEDEC ClassElectrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine ModelESD MM400VCNotes: 5. For a device mounted with the exposed collector pad on 15mm x 15mm 1oz copper that is on a single-sided 1.6mm FR4 PCB; device is measured under still air conditions whilst operating in a steady-state.6. Same as Note 5, except the device is mounted on 25mm x 25mm 1oz copper.7. Same as Note 5, except the device is mounted on 50mm x 50mm 1oz copper.8. Thermal resistance from junction to solder-point (on the exposed collector pad).9. Thermal resistance from junction to the top of the case.10. Refer to JEDEC specification JESD22-A114 and JESD22-A115.xx = Product Type Marking Code, as follows:BCX51 = AA BCX52 = AEBCX53 = AH BCX5110 = AC BCX5210 = AG BCX5310 = AK BCX5116 = AD BCX5216 = AMBCX5316 = ALThermal Characteristics and Derating Information2550751001251500.00.20.40.60.81.0Derating CurveTemperature (°C) M a x P o w e r D i s s i p a t i o n (W )Transient Therm al Im pedanceT h e r m a l R e s i s t a n c e (°C /W )Pulse Width (s)Pulse Power DissipationPulse Width (s)M a x P o w e r D i s s i p a t i o n (W )Copper Area (sqmm)M a x i m u m P o w e r (W )Copper Area (sqmm)T h e r m a l R e s i s t a n c e (°C /W )Note:11. Measured under pulsed conditions. Pulse width ≤ 300µs. Duty cycle ≤ 2%.Typical Electrical Characteristics (@ T A = +25°C, unless otherwise specified.)-I , COLLECTOR CURRENT (A)C h ,D C C U R RE N T G A I NF E Fig. 2 Typical DC Current Gain vs. Collector CurrentDC Current Gain vs. Collector Current -V , COLLECTOR-EMITTER VOLTAGE (V)CE I , C O L L E C T O R C U R R E N T (A )CFig. 1 Typical Collector Current vs. Collector-Emitter VoltageCollector Current vs. Collector-Emitter Voltage -h FE V I CI C V V CETypical Electrical Characteristics (continued.)0.20.40.60.81.0-V , B A S E -E M I T T E R T U R N -O N V O L T A G E (V )B E (O N)-I , COLLECTOR CURRENT (A)C -V , C O L L E C T O R -E M I T T E R S A T U R A T I O N V O L T A G E (V )C E (S A T )Fig. 4 Typical Collector-Emitter Saturation Voltagevs. Collector Current 0.20.40.60.81.01.2-V , B A S E -E M I T T E R S A T U R A T I O N V O L T A G E (V B E (S AT )-I , COLLECTOR CURRENT (mA)C f , G A I N -B A ND W I D T H P R O D U C T (M H z )T Fig. 6 Typical Gain-Bandwidth Product vs. Collector Current V , REVERSE VOLTAGE (V)R C A P A C I T A N C E (p F )Fig. 7 Typical Capacitance Characteristics -V B E (s a t ), B A S E -E M I T T E R S A T U R A T I O N V O L T A G E )-V B E (o n ), B A S E -E M I T T E R T U R N -O N V O L T A G E (V )-V C E (s a t ) , C O L L E C T O R -E M I T T E RC v V RVCE(sat) V I Cf T V I CPackage Outline DimensionsPlease see /package-outlines.html for the latest version.SOT89SOT89Dim Min Max TypA 1.40 1.60 1.50B 0.50 0.62 0.56B1 0.42 0.540.48c 0.35 0.43 0.38D 4.40 4.60 4.50D1 1.62 1.83 1.733D2 1.61 1.81 1.71E 2.40 2.60 2.50E2 2.05 2.35 2.20e - - 1.50H 3.95 4.25 4.10H1 2.63 2.93 2.78L 0.90 1.20 1.05L1 0.327 0.527 0.427z 0.20 0.40 0.30All Dimensions in mmSuggested Pad LayoutPlease see /package-outlines.html for the latest version.SOT89Dimensions Value(in mm)C 1.500G 0.244X 0.580X1 0.760X2 1.933Y 1.730Y1 3.030Y2 1.500Y3 0.770Y4 4.530TOP VIEW。
电路保护用正温度系数(PTC)热敏电阻
b
电流 (对数)
c
E
RL
a
I
A
I
=
E - Vp RL
B
电压 (对数)
E
[保护门限电流范围]
1000
电流 (mA)
800 跳闸电流
600 保护门限电流
400 不工作电流
200
0 -20
0 20 40 60 周围温度 (℃)
[工作电流]
I0
I0 2
电流 (A)
R90C.pdf 05.07.22
目录
1
本产品目录中的POSISTORr 与“POSISTOR”是村田制作所的注册商标。
品名表示法 POSISTORr 的基本特性 选择指南 用途一览表 1 过载电流保护用 片状型
片状型规格与测试方法
2 过载电流保护用 窄电流偏差 30V系列 3 过载电流保护用 窄电流偏差 51/60V系列 4 过载电流保护用 窄电流偏差 140V系列 5 过载电流保护用 24/30/32V系列 6 过载电流保护用 56/80V系列 7 过载电流保护用 125/140V系列 8 过载电流保护用 250/265V系列 PTGL系列窄电流偏差规格与测试方法 PTGL系列规格与测试方法 9 过热传感用 片状型 片状型 (仅供参考) 片状窄偏差型 (仅供参考) 片状型规格与测试方法 片状窄偏差型规格与测试方法 10 过热传感用 引线型
例如)
代码 470 471
电阻值 47Ω 470Ω
y电阻值允许偏差 代号 M Q
电阻值允许偏差 ±20%
特定允许偏差
u特殊规格 代号 B1
特殊规格 结构和其他
i包装 代号 RA RB RK
MALSECB00BC222DARK中文资料
Document Number: 25143For technical questions, contact: aluminumcaps1@Aluminum CapacitorsECBVishay RoedersteinFEATURES•Polarized aluminum electrolytic capacitors •SMD style•Miniature dimension•Extended temperature range: 105 °C •Reflow soldering •RoHS compliantAPPLICATIONS•Industrial electronics, automotive electronics, telecommunication systems •Smoothing and filtering•Miniature power supply units, dc-to-dc convertersPACKAGING•Supplied in blister tapeQUICK REFERENCE DATADESCRIPTIONUNIT VALUE Nominal case size (Ø D x L )mm 4 x 5.3 to 10 x 10Rated capacitance range C R µF 0.1to 470Capacitance tolerance %± 20Rated voltage range V 16to 50Category temperature range °C - 40to + 105Load lifeh1000Based on sectional specification IEC 60384-4/EN 130300Climatic category IEC 6006840/105/56SELECTION CHART FOR C R , U R AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)C R (µF)RATED VOLTAGE (V)162535500.10→→→ 4 x 5.30.22→→→ 4 x 5.30.33→→→ 4 x 5.30.47→→→ 4 x 5.31.0→→→ 4 x 5.32.2→→→ 4 x 5.33.3→→→ 4 x 5.34.7→→ 4 x 5.3 5 x 5.310 4 x 5.3→ 5 x 5.3 6.3 x 5.322 5 x 5.3→ 6.3 x 5.3 6.3 x 5.833→ 6.3 x 5.3 6.3 x 5.8 6.3 x 7.747 6.3 x 5.3→ 6.3 x 5.8 6.3 x 7.7100 6.3 x 5.8 6.3 x 7.78 x 1010 x 10220 6.3 x 7.78 x 1010 x 10-3308 x 1010 x 10--47010 x 10--- For technical questions, contact: aluminumcaps1@Document Number: 25143ECBVishay RoedersteinAluminum CapacitorsNoteUnless otherwise specified, all electrical values apply at T amb =20°C, P = 80 to 120kPa, RH =45to 75 %.ORDERING EXAMPLEECB 10 µF/35 V, ± 20 %, size 5 x 5.3 mm Ordering code: MALSECB00BC210FARKFor Standard Packaging Quantity (SPQ) and Minimum Order Quantity (MOQ) please refer to our price list or contact customer service.ELECTRICAL DATASYMBOL DESCRIPTIONU R rated voltageC R rated capacitance at 120 Hz tan δmax. dissipation factor at 120HzR ESR max. equivalent series resistance at 120 Hz I Rrated alternating current at 120 Hz and upper catagory temperatureELECTRICAL DATA AND ORDERING INFORMATIONU R (V)C R 120 Hz (µF)DIMENSIONSD x L (mm)tan δ120 Hz R ESR 120 Hz (Ω)I R120 Hz/105 °C(mA)WEIGHT (g)CATALOG NUMBER 1610 4 x 5.30.1925.20170.12MALSECB00BB210DARK 22 5 x 5.30.1911.45300.17MALSECB00BC222DARK 476.3 x 5.30.19 5.36510.30MALSECB00BD247DARK 100 6.3 x 5.80.19 2.52640.30MALSECB00AD310DARK 220 6.3 x7.70.19 1.151050.37MALSECB00BM322DARK 3308 x 100.190.76425 1.00MALSECB00AF333DARK 47010 x 100.190.544701.21MALSECB00AG347DARKDocument Number: 25143For technical questions, contact: aluminumcaps1@ECBAluminum CapacitorsVishay RoedersteinREFLOW SOLDERING CONDITIONS FOR SMD ALUMINUM ELECTROLYTIC CAPACITORS25336.3 x 5.30.15 6.03480.30MALSECB00BD233EARK 100 6.3 x7.70.15 1.99910.37MALSECB00BM310EARK 2208 x 100.150.90340 1.00MALSECB00AF322EARK 33010 x 100.150.60360 1.21MALSECB00AG333EARK 354.7 4 x5.30.1336.69140.12MALSECB00BB147FARK 10 5 x 5.30.1317.24240.17MALSECB00BC210FARK 226.3 x 5.30.137.84420.30MALSECB00BD222FARK 33 6.3 x 5.80.13 5.22520.30MALSECB00AD233FARK 47 6.3 x 5.80.13 3.67630.30MALSECB00AD247FARK 1008 x 100.13 1.72296 1.00MALSECB00AF310FARK 22010 x 100.130.78435 1.21MALSECB00AG322FARK 500.10 4 x 5.30.111459 2.30.12MALSECB00BB010HARK 0.22 4 x 5.30.11663.2 3.40.12MALSECB00BB022HARK 0.33 4 x 5.30.11442.1 4.10.12MALSECB00BB033HARK 0.47 4 x 5.30.11310.4 4.90.12MALSECB00BB047HARK 1.0 4 x 5.30.11145.97.20.12MALSECB00BB110HARK 2.24 x 5.30.1166.3210.70.12MALSECB00BB122HARK 3.3 4 x 5.30.1144.2113.10.12MALSECB00BB133HARK 4.75 x 5.30.1131.0418.10.17MALSECB00BC147HARK 10 6.3 x 5.30.1114.5930.80.30MALSECB00BD210HARK 22 6.3 x 5.80.11 6.63450.30MALSECB00AD222HARK 33 6.3 x 7.70.11 4.42600.37MALSECB00BM233HARK 47 6.3 x 7.70.11 3.10630.37MALSECB00BM247HARK 10010 x 100.111.462951.21MALSECB00AG310HARKELECTRICAL DATA AND ORDERING INFORMATIONU R (V)C R 120 Hz (µF)DIMENSIONSD x L (mm)tan δ120 Hz R ESR 120 Hz (Ω)I R120 Hz/105 °C(mA)WEIGHT (g)CATALOG NUMBER For technical questions, contact: aluminumcaps1@Document Number: 25143ECBVishay RoedersteinAluminum CapacitorsPROFILE FEATURESOLDERING CONDITIONØ 4 ~ Ø 10Ø 12.5Ø 16Average ramp-up rate (T L to T P) 3 °C/s max. 3 °C/s max.PreheatTemperature min. (T s min.)150 °C 150 °C Temperature max. (T s max.)200 °C 200 °CTime (T s min. to T s max.)60 ~ 150 s 40 ~ 120 s40 ~ 100 s T s max. to T L Ramp-up rate3 °C/s max. 3 °C/s max.Time maintained above Temperature (T L )217 °C 217 °C Time (t L )60 ~ 90 s 40 ~ 60 sPeak/classification temperature (T P )250 °C 240 °C230 °C Time within 5 °C of actual peak temperature (T P )10 s max.10 s max.Ramp-down rate3 °C/s max. 3 °C/s max.Time 25 °C to peak temperature8 min max.8 min max.RESISTANCE TO SOLDERING HEATLeakage current Less than specified value Capacitance value Within ± 10 % of initial value Tan δLess than specified valueLOW TEMPERATURE BEHAVIOR (at 120 Hz)IMPEDANCE RATIO (Z) T2/(Z) T1RATED VOLTAGE (V)T2/T116253550- 25 °C/+ 20 °C 2222- 40 °C/+ 20 °C4333ADDITIONAL ELECTRICAL DATAPARAMETER CONDITIONS VALUECurrentLeakage current(T est conditions: U R , 20 °C)after 2 min at U RI L2 ≤ 0.01 x C R x U Ror 3 µAfor U R ≤ 100 V (whichever is greater)ResistanceEquivalent seriesresistance (ESR)calculated from tan δmax.ESR = tan δ/2πf C RMULTIPLIER OF RIPPLE CURRENT (I R ) AS A FUNCTION OF FREQUENCYFREQUENCY (Hz)I R MULTIPLIER FOR U R ≤ 100 V500.70120 1.00300 1.171000 1.36≥ 10 0001.50TEST PROCEDURES AND REQUIREMENTSTEST PROCEDURE (QUICK REFERENCE)REQUIREMENTSLoad lifeT amb = 105 °C U R and I R applied After 1000 hΔC/C: ± 25 % of initial value I L ≤ spec. limittan δ ≤ 2 x spec. limit Shelf lifeNo voltage applied After 1000 hAfter test: U R to be applied for 30 min 24 to 48 h before measurementΔC/C: ± 25 % of initial value I L ≤ spec. limittan δ ≤ 2 x spec. limitDisclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。
5500FE安全与音频双导22AWGBC CMRC安全系统电缆说明说明书
24 AWG (7x32) TC
Outer Jacket
Material
Nom. Thickness Nom. Diameter Ripcord
PVC - Polyvinyl Chloride 0.017 in (0.43 mm) 0.126 in (3.20 mm) Yes
Overall Cable Diameter (Nominal):
5500FE 008U500 Gray UnReel
500 ft 612825423836
5500FE 0081000 Gray Reel
1,000 ft 612825162803
5500FE 008U1000 Gray UnReel
1,000 ft 612825162780
5500FE 008Z1000 Gray ReelTuff Box 1,000 ft 612825162810
Product: 5500FE Security & Sound, 2 Conductor 22 AWG, BC, CMR
Product Description Security & Sound Cable, Riser-CMR, 2-22 AWG stranded bare copper conductors with polypropylene insulation, Beldfoil® shield and PVC jacket with ripcord
UL Temperature Operating
75°C
-20°C to +75°C
Bend Radius Stationary Min. Installation Min. 1.3 in (33 mm) 1.3 in (33 mm)
AM-22A产品规格书
为了降低芯片的耗能及提高电路的效率,内部为高压晶体管的B极提供的基 极电流采用了斜坡电流驱动技术,当开关电流Is为0时,基极电流约为40mA,随着
开关电流的逐步增大,基极电流也逐步增大,当开关电流为600mA时,基极电流 为100mA。
Ib 不 Is 时序图
德阳金格瑞机电物资有限公司半导体事业部 Mail:AM-22A@ 邵先生(13981083365)
高性能开关电源控制芯片
电气参数
项目
测试条件
最小 典型 最大 单位
电源电压 VCC
AC 输入 85V------265V 4
56V
启动电压
AC 输入 85V------265V 4.8 5 5.2 V
关闭电压
AC 输入 85V------265V 3.6 4 4.2 V
电源电流
Vcc=5V,Fb=2.2V
AM-22A
高性能开关电源控制芯片
◆变压器设计（仅作参考）
1、参数确定
变压器设计时，首先要先确定一些参数：
（1） 输入电压范围
（2） 输出电压及电流
（3） 开关频率
（4） 最大占空比
本设计例：
（1）输入电压范围 AC85~265V
（2）输出电压及电流 DC12V/1A
（3）开关频率
F=65KHz
（4）最大占空比
斜率检测时序图 根据电感电流公式I=U/L*△t可知,在电感丌变时,在一个固定的时间上检测电 流可计算出电压,芯片利用该原理在350nS时检测Is电流,当Is电流小于0.14V时, 电路正常工作,当Is电流大于0.14V时,芯片迚入异常保护;同理,当外部的电感器的
德阳金格瑞机电物资有限公司半导体事业部 Mail:AM-22A@ 邵先生(13981083365)
Eaton C422N 电路保护设备产品说明说明书
Eaton C422NEaton Moeller series Luxury finish range (COPA) - Wiring Devices. Switch, 50A, 2p, neon, 1G plate size, white interiorGeneral specificationsEaton Moeller series Luxury finish range (COPA) - Wiring DevicesC422N C422N501082612727545 mm 86 mm 86 mm 0.122 kg RoHS conformBS EN 60669-1 IEC 60669-1Product NameCatalog NumberModel Code EANProduct Length/Depth Product Height Product Width Product Weight Compliances CertificationsNot included50 Ampere AC/DC2-pole switch47 mm6.5 mmBasic element with full cover plateMattFlush mounted (plaster)White insert50 ADuroplast47 mmThermoplasticRocker/button4 mm² (3x) or 6 mm² (2x) or 10 mm² (1x) 60.3 mmScrew terminal eaton-us-power-defense-flyer-br013004en-en-us.pdf eaton-circuit-breakers-bzm-catalog-w1230-7594-gb-int.pdf eaton-xchargein-installation-manual-v1.01-en-us.pdfLighting typeSwitching current of fluorescent lamps Wiring systemRecommended back box depth - min Front plate depthAssembly arrangementSurface finishingMounting methodCOPA interiorAmperage RatingMaterial qualityBuilt-in installation box depth - min Front plate materialMethod of operationTerminal capacity (LN and E)Fixing centersConnection typeIllumination BrochuresCatalogsInstallation instructionsRocker colorWhiteVoltage rating250 V ACHead styleCombination headDegree of protectionIP20IP3XSpecial featuresZinc Coated Steel with clear PassivationSwitch typeDouble poleFront plate/module dimensions84 mm x 84 mmNominal voltage - max240 VColorWhiteBuilt-in depth25 mmFeaturesPush button switchHalogen freeMaterialPlasticUreaFront plate color/finishingWhiteFunction lightingIlluminated (on)Base colorGrayNumber of gangs1Contact materialSilverEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia0Copa Switches Screw mounting 0Untreated ThermoplasticNo1BrassNumber of modules (module system)TypeFastening type RAL-number (Akin)Surface protection Base material Label space/information surface Number of rockers Terminal material。
Schneider Electric Altistart 22软启动器ATS22-控制器产品数据册说
T h e i n f o r m a t i o n p r o v i d e d i n t h i s d o c u m e n t a t i o n c o n t a i n s g e n e r a l d e s c r i p t i o n s a n d /o r t e c h n i c a l c h a r a c t e r i s t i c s o f t h e p e r f o r m a n c e o f t h e p r o d u c t s c o n t a i n e d h e r e i n .T h i s d o c u m e n t a t i o n i s n o t i n t e n d e d a s a s u b s t i t u t e f o r a n d i s n o t t o b e u s e d f o r d e t e r m i n i n g s u i t a b i l i t y o r r e l i a b i l i t y o f t h e s e p r o d u c t s f o r s p e c i f i c u s e r a p p l i c a t i o n s .I t i s t h e d u t y o f a n y s u c h u s e r o r i n t e g r a t o r t o p e r f o r m t h e a p p r o p r i a t e a n d c o m p l e t e r i s k a n a l y s i s , e v a l u a t i o n a n d t e s t i n g o f t h e p r o d u c t s w i t h r e s p e c t t o t h e r e l e v a n t s p e c i f i c a p p l i c a t i o n o r u s e t h e r e o f .N e i t h e r S c h n e i d e r E l e c t r i c I n d u s t r i e s S A S n o r a n y o f i t s a f f i l i a t e s o r s u b s i d i a r i e s s h a l l b e r e s p o n s i b l e o r l i a b l e f o r m i s u s e o f t h e i n f o r m a t i o n c o n t a i n e d h e r e i n .Product data sheetCharacteristicsATS22C14Qsoft starter-ATS22-control 220V-power230V(37kW)/400...440V(75kW)Product availability: Non-Stock - Not normally stocked in distribution facilityMainRange of product Altistart 22Product or component typeSoft starterProduct destination Asynchronous motors Product specific applica-tionPumps and fans Component name ATS22Phase3 phase[Us] rated supply volt-age230...440 V - 15...10 %Motor power kW37 KW 230 V 75 KW 400 V 75 kW 440 V Factory setting current 131 APower dissipation in W 82 W for standard applications Utilisation category AC-53AType of start Start with torque control (current limited to 3.5 In)IcL starter rating 140 A connection in the motor supply line for stan-dard applications IP degree of protectionIP00ComplementaryAssembly style With heat sink Function available Internal bypass Supply voltage limits 195…484 VSupply frequency 50...60 Hz - 10...10 %Network frequency 45...66 HzDevice connection In the motor supply lineTo the motor delta terminals [Uc] control circuit voltage 230 V - 15...10 % 50/60 Hz Control circuit consumption 20 W Discrete output number 2Discrete output typeRelay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/ORelay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/OMinimum switching current 100 mA 12 V DC relay outputs)Maximum switching current5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs Discrete input number 3Discrete input type LI1, LI2, LI3) logic, 5 mA 4.3 kOhm Discrete input voltage 24 V <= 30 VDiscrete input logic Positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA Output current 0.4...1 Icl adjustable PTC probe input750 Ohm Communication port protocol Modbus Connector type1 RJ45Communication data link SerialPhysical interface RS485 multidropTransmission rate4800, 9600 or 19200 bpsInstalled device31Protection type Phase failure lineThermal protection motorThermal protection starterMarking CEType of cooling Forced convectionOperating position Vertical +/- 10 degreeHeight14.02 in (356 mm)Width 5.91 in (150 mm)Depth9.04 in (229.5 mm)Net weight39.68 lb(US) (18 kg)Motor power range AC-330…50 KW 200…240 V 3 phase55…100 kW 380…440 V 3 phaseMotor starter type Soft starterEnvironmentElectromagnetic compatibility Conducted and radiated emissions level A IEC 60947-4-2Damped oscillating waves level 3 IEC 61000-4-12Electrostatic discharge level 3 IEC 61000-4-2Immunity to electrical transients level 4 IEC 61000-4-4Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3Voltage/current impulse level 3 IEC 61000-4-5Standards EN/IEC 60947-4-2Product certifications ULCSAC-TickGOSTCCCVibration resistance 1 gn 13…200 Hz)EN/IEC 60068-2-61.5 mm 2…13 Hz)EN/IEC 60068-2-6Shock resistance15 gn 11 ms EN/IEC 60068-2-27Noise level56 dBPollution degree Level 2 IEC 60664-1Relative humidity0…95 % without condensation or dripping water EN/IEC 60068-2-3Ambient air temperature for operation14…104 °F (-10…40 °C) without)104…140 °F (40…60 °C) with current derating 2.2 % per °C)Ambient air temperature for storage-13…158 °F (-25…70 °C)Operating altitude<= 3280.84 ft (1000 m) without> 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % peradditional 100 mOrdering and shipping detailsCategory22576 - ATS22 ALTISTARTDiscount Schedule CP1GGTIN03606480167256Package weight(Lbs)12.67 kg (27.94 lb(US))Returnability NoCountry of origin IDOffer SustainabilitySustainable offer status Green Premium productREACh Regulation REACh DeclarationEU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)EU RoHS Decla-rationMercury free YesRoHS exemption information YesChina RoHS Regulation China RoHS DeclarationEnvironmental Disclosure Product Environmental ProfileCircularity Profile End Of Life InformationWEEE The product must be disposed on European Union markets following specificwaste collection and never end up in rubbish bins.Contractual warrantyWarranty18 monthsDimensions DrawingsFrame Size C DimensionsMounting and ClearancePrecautionsStandardsThe Altistart 22 soft starter is compliant with pollution Degree 2 as defined in NEMA ICS1-1 or IEC 60664-1.DANGERAir CirculationLeave sufficient free space to help the air required for cooling purposes to circulate from the bottom to the top of the unit.OverheatingTo avoid the soft starter to overheat, respect the following recommendations:●Mount the Altistart 22 Soft Starter within ± 10° of vertical.●Do not locate the Altistart 22 Soft Starter near heat radiating elements.●Electrical current through the Altistart 22 Soft Starter will result in heat losses that must be dissipated into the ambient air immediatelysurrounding the soft starter. To help prevent a thermal fault, provide sufficient enclosure cooling and/or ventilation to limit the ambient temperature around the soft starter.●If several soft starters are installed in a control panel, arrange them in a row. Do not stack soft starters. Heat generated from the bottomsoft starter can adversely affect the ambient temperature around the top soft starter.MountingConnection Between the Fan and the Altistart 22 Soft Starter1Altistart 22 Soft Starter2FanWall mounted or Floor-standing Enclosure with IP 23 Degree of protectionIntroductionTo help proper air circulation in the soft starter, grilles and forced ventilation can be installed. Ventilation GrillesForced Ventilation UnitProduct data sheetATS22C14QConnections and SchemaPower TerminalBar StylePower supply and output to motor Bar b20 mm (0.79 in) a 5 mm (0.2 in)Bolt M8 (0.31 in)Cable and protective cover Size95 mm²Gauge250 MCMProtective cover LA9F702Tightening torque18 N.m157.5 lb.inPower connections, minimum required wiring section230 Vac control, logic Inputs (LI) 24 Vdc, 3-wire controlWith Line Contactor, Freewheel or Controlled Stop230 Vac control, logic Inputs (LI) 24 Vdc, 2-wire control,freewheel stopConnection in the motor delta winding in series with each windingWiringATS22 soft starters connected to motors with the delta connections can be inserted in series in the motor windings.The following wiring requieres particular attention. It is documented in the Altistart 22 Soft start - soft stop unit user manual. Please contact Schneider Electric commercial organisation for further informations.ExampleA 400 V - 110 kW motor with a line current of 195 A (nominal current for the delta connection). The current in each winding is equal to 195/1.5 or 130 A. The rating is determined by selecting the soft starter with a permanent nominal current (ICL) just above this current.Product data sheetATS22C14Q Performance CurvesMotor Thermal Protection - Cold CurvesCurvesA Class 10B Class 20C Class 30Trip time for a Standard Application (Class 10)3.5 ln32 sTrip time for a Severe Application (Class 20)3.5 ln63 sTrip time for a Severe Application (Class 30)3.5 ln95 sMotor Thermal Protection - Warm Curves CurvesA Class 10B Class 20C Class 30Trip time for a Standard Application (Class 10) 3.5 ln16 sTrip time for a Severe Application (Class 20) 3.5 ln32 sTrip time for a Severe Application (Class 30) 3.5 ln48 s。
海尔 BCD-222BC 242BC 222C 242C 电冰箱 说明书
冰箱废弃不用时，请将门子卸掉，并拆下门 封条，以免小孩子进入玩耍，发生意外。
1.保修证：当您需要正常咨询或维修时，请持保修证和购机发票 与我公司当地售后服务中心联系，并将保修证妥善保管。 2.保修期内整机免费保修一年，主要零部件免费保修三年。(自购 买日起，以发票日期为准)
本产品只适合在中国大陆销售和使用
目录
使用之前 产品特点-----------------------------------1 各部分构件名称 --------------------------2 安全注意事项-----------------------------3~5 放置环境-----------------------------------6 使用准备-----------------------------------7 开始使用-----------------------------------8 功能介绍-----------------------------------9~16 冷藏室的使用指导 关于冷藏室---------------------------------17~18 冷藏食品注意事项------------------------19 巧用冷藏室---------------------------------20 饮品室的使用指导 关于饮品室---------------------------------21 冷冻室的使用指导 关于变温室---------------------------------22 关于冷冻室---------------------------------23 冷冻食品注意事项------------------------24 除霜·清洁·停用 除霜-----------------------------------------25 清洁-----------------------------------------26 停用-----------------------------------------27~28 疑问解答·售后服务 疑问解答-----------------------------------29~30 售后服务-----------------------------------31~32 技术数据·线路图·装箱单 技术数据-----------------------------------33 线路图·装箱单--------------------------34~35 ·使用前请仔细阅读本说明书。 ·请注意保存。 ·冰箱外观、颜色或画门图案见实物。
滚筒烘干机操作手册说明书
TMB1277C_SVG
产品编号 70457901CNR18 4 月 2019
产品安装时必须遵守本地法规，如本地无相关法规，则： 在美国，应遵守美国国家标准 Z223.1/ NFPA 54 《国家燃气规范》(National Fuel Gas Code) 的最新版本以及标准 ANSI/NFPA 70《国家电气安全规范》(National Electric Code)。 在加拿大，应遵守 CAN/CSA-B149.1 即《天然气和丙烷安装规范》(Natural Gas and Propane Installation Code) 以及最新版本 的 CSA C22.1 《加拿大电气标准》(Canadian Electric Code) 的第一部分。 在澳大利亚及新西兰，应遵守燃气安装标准 AS/NZS 5601 第一部分“一般安装方法”(General Installations) 中的规定。
W002R1ຫໍສະໝຸດ ©Alliance Laundry Systems LLC，版权所有 – 请勿复制或传播
3
产品编号 70457901CNR18
警告
• 设备必须由合格安装人员进行安装。 • 安装滚筒烘干机时必须遵守制造商的说明和当地有关法规。 • 请勿使用柔性塑料通风材料安装滚筒烘干机。如果安装了柔性金属（箔式）管道，该管道必须属于经设备制造商认可
尺寸规格...............................................................................................16 尺寸规格..................................................................................................... 16 机体尺寸..................................................................................................... 18 排气口位置................................................................................................. 19 燃气连接位置.............................................................................................. 20 电气连接位置.............................................................................................. 21 蒸汽连接位置.............................................................................................. 22