螺母常见英文单词汇总
螺栓,螺母,螺钉,轴承通用零部件常用英语英文
木炭机知识1 GB/T 2-1985 紧固件外螺纹零件的末端Fasteners--Ends of parts with external thread2 GB/T 8-1988 方头螺栓C级Square head bolts--Product grade C3 GB/T 10-1988 沉头方颈螺栓Flat countersunk square neck bolts4 GB/T 11-1988 沉头带榫螺栓Flat countersunk nib bolts5 GB/T 12-1988 半圆头方颈螺栓Cup head square neck bolts6 GB/T 13-1988 半圆头带榫螺栓Cup head nib bolts7 GB/T 15-1988 大半圆头带榫螺栓Cup head nib bolts with large head8 GB/T 22-1976 小六角头导颈螺栓Bolts, small hexagon head with fit neck9 GB/T 23-1976 小六角头螺杆带孔螺栓Bolts, small hexagon head with hole through the shank10 GB/T 24-1976 小六角头螺杆带孔导颈螺栓Bolts, small hexagon head with fit neck and hole through the shank11 GB/T 25-1976 小六角头头部带孔螺栓Bolts, small hexagon head with holes through the head12 GB/T 26-1976 小六角头头部带孔导颈螺栓Bolts, small hexagon head with fit neck and holes through the head13 GB/T 27-1988 六角头铰制孔用螺栓A和B级Hexagon fit bolts--Product grade A and B14 GB/T 28-1988 六角头螺杆带孔铰制孔用螺栓A和B级Hexagon fit bolts with Split pin hole on shank--Product grade A and B15 GB/T 29.1-1988 六角头头部带槽螺栓A和B级Hexagon bolts with slot on head--Product grade A and B16 GB/T 29.2-1988 十字槽凹穴六角头螺栓Cross recessed hexagon bolts with indentation17 GB/T 31.1-1988 六角头螺杆带孔螺栓A和B级Hexagon bolts with split pin hole on shank--Product grade A and B18 GB/T 31.2-1988 六角头螺杆带孔螺栓细杆B级Hexagon bolts with split pin hole on shank--Reduced shank--Product grade B19 GB/T 31.3-1988 六角头螺杆带孔螺栓细牙A和B级Hexagon bolts with split pin hole on shank--Fine pitch thread--Product grade A and B20 GB/T 32.1-1988 六角头头部带孔螺栓A和B级Hexagon bolts with wire holes on head--Product grade A and B21 GB/T 32.2-1988 六角头头部带孔螺栓细杆B级Hexagon bolts with wire holes on head--Reduced shank--Product grade B22 GB/T 32.3-1988 六角头头部带孔螺栓细牙A和B级Hexagon bolts with wire holes on head--Fine pitch thread--Product grade A and B23 GB/T 35-1988 小方头螺栓B级Square head bolts with small head--Product grade B24 GB/T 37-1988 T型槽用螺栓Bolts for T-Slot25 GB/T 38-1976 螺栓技术条件Bolts--Technical requirements26 GB/T 39-1988 方螺母C 级Square nuts--Product grade C27 GB/T 41-1986 1 型六角螺母C 级Hexagon nuts--Style 1--Product grad C28 GB/T 56-1988 六角厚螺母Hexagon thick nuts29 GB/T 61-1976 螺母技术条件Nuts--Technical requirements30 GB/T 62-1988 蝶形螺母Wing nuts31 GB/T 63-1988 环形螺母Lifting nuts32 GB/T 65-1985 开槽圆柱头螺钉Slotted cheese head screws33 GB/T 67-1985 开槽盘头螺钉Slotted pan head screws34 GB/T 68-1985 开槽沉头螺钉Slotted countersunk head screws35 GB/T 69-1985 开槽半沉头螺钉Slotted raised countersunk head screws36 GB/T 70-1985 内六角圆柱头螺钉Hexagon socket cap head screws37 GB/T 71-1985 开槽锥端紧定螺钉Slotted set screws with cone point38 GB/T 72-1988 开槽锥端定位螺钉Slotted set screws with cone point39 GB/T 73-1985 开槽平端紧定螺钉Slotted set screws with flat point40 GB/T 74-1985 开槽凹端紧定螺钉Slotted set screws with cup point41 GB/T 75-1985 开槽长圆柱端紧定螺钉Slotted set screws withlong dog point42 GB/T 77-1985 内六角平端紧定螺钉Hexagon socket set screws with flat point43 GB/T 78-1985 内六角锥端紧定螺钉Hexagon socket set screws with cone point44 GB/T 79-1985 内六角圆柱端紧定螺钉Hexagon socket set screws with dog point45 GB/T 80-1985 内六角凹端紧定螺钉Hexagon socket set screws with cup point46 GB/T 83-1988 方头长圆柱球面端紧定螺钉Square set screws with long dog point and rounded end47 GB/T 84-1988 方头凹端紧定螺钉Square set screws with cup point48 GB/T 85-1988 方头长圆柱端紧定螺钉Square set screws with long dog point49 GB/T 86-1988 方头短圆柱锥端紧定螺钉Square set screws with short dog point and cone end50 GB/T 89-1976 螺钉技术条件Screws--Technical requirements51 GB/T 90-1985 紧固件验收检查、标志与包装Acceptance inspection,marking and packaging of fasteners52 GB/T 91-1986 开口销Split pins53 GB/T 93-1987 标准型弹簧垫圈Single coil spring lock washers--Normal type54 GB/T 94.1-1987 弹性垫圈技术条件弹簧垫圈Specifications for spring washers--Single coil spring lock washers55 GB/T 94.2-1987 弹性垫圈技术条件齿形、锯齿锁紧垫圈Specifications for spring washers--Toothed lock and serrated lock washers56 GB/T 94.3-1987 弹性垫圈技术条件鞍形、波形弹性垫圈Specifications for spring washers--Curved and wave spring washers57 GB/T 95-1985 平垫圈-C级Plain washers--Product grade C58 GB/T 272-1993 滚动轴承代号方法Rolling bearing--Identification code59 GB/T 273.1-1987 滚动轴承圆锥滚子轴承外形尺寸方案Rolling bearings Tapered roller bearings--Boundary dimensions60 GB/T 273.3-1988 滚动轴承向心轴承外形尺寸方案Rolling bearings Radial bearings-Boundary dimensions61 GB/T 274-1991 滚动轴承装配倒角极限Rollingbearing chamfer dimension limits62 GB/T 275-1993 滚动轴承与轴和外壳的配合Shaft and housing fits for rolling bearings63 GB/T 276-1994 滚动轴承深沟球轴承外形尺寸Rolling bearings--Deep groove ball bearings--Boundary dimensions64 GB/T 280-1964 带毡封圈的单列向心球轴承结构型式和基本尺寸Rolling bearings--Single-row radial ball bearings withfelt seals--Types and basic dimensions65 GB/T 281-1994 滚动轴承调心球轴承外形尺寸Rolling bearings--Self-aligning ball bearings--Boundary dimensions66 GB/T 283-1994 滚动轴承圆柱滚子轴承外形尺寸Rolling bearings--Cylindrical roller bearings-Boundary dimensions67 GB/T 285-1994 滚动轴承双列圆柱滚子轴承外形尺寸Rolling bearings--Double row cylindrical roller bearings-Boundary dimensions68 GB/T 286-1964 双列向心球面滚子轴承结构型式和基本尺寸Rolling bearings--Double -row radial spherical roller bearings--Types and basic dimensions69 GB/T 288-1994 滚动轴承调心滚子轴承外形尺寸Rolling bearings--Self-aligning roller bearings-Boundary dimensions70 GB/T 289-1964 滚针轴承结构型式和基本尺寸Needle roller bearings--Types and basic dimensions71 GB/T 291-1964 螺旋滚子轴承结构型式和基本尺寸Rolling bearings with helically wound cylindrical rollers--Types and basic dimensions72 GB/T 292-1994 滚动轴承角接触球轴承外形尺寸Rolling bearings--Angular contact ball bearings--Boundary dimensions73 GB/T 294-1994 滚动轴承三点和四点接触球轴承外形尺寸Rolling bearings--Three point and four point contact ball bearings--Boundary dimensions74 GB/T 296-1994 滚动轴承双列角接触球轴承外形尺寸Rolling bearings--Double row angular contact ballbearings--Boundary dimensions75 GB/T 297-1994 滚动轴承圆锥滚子轴承外形尺寸Rolling bearings--Tapered roller bearings--Boundary dimensions76 GB/T 299-1995 滚动轴承双列圆锥滚子轴承外形尺寸Rolling bearings--Metric double row tapered roller bearings--Boundary dimensions77 GB/T 300-1995 滚动轴承四列圆锥滚子轴承外形尺寸Rolling bearings--Four row tapered roller bearings--Boundary dimensions78 GB/T 301-1995 滚动轴承推力球轴承外形尺寸Rolling bearings--Thrust ball bearings--Boundary dimensions79 GB/T 304.1-1988 关节轴承分类Spherical plain bearings Classification80 GB/T 304.2-1988 关节轴承代号方法Spherical plain bearings Identification code81 GB/T 304.3-1990 关节轴承配合Spherical plain bearings-Fits82 GB/T 304.9-1981 向心关节轴承技术条件Spherical plain radial bearings, joint type--Technical requirements83 GB/T 304.10-1989 关节轴承公差Spherical plain bearings-Tolerances84 GB/T 307.1-1994 滚动轴承向心轴承公差Rolling bearings--Radial bearings--Tolerances85 GB/T 307.2-1995 滚动轴承测量和检验的原则及方法Rolling bearings--Measuring and gauging principles and methods86 GB/T 307.3-1996 滚动轴承通用技术规则Rolling bearings--General technical regulations87 GB/T 307.4-1994 滚动轴承推力球轴承公差Rolling bearings--Thrust ball bearings--Tolerances88 GB/T 308-1989 滚动轴承钢球Rolling bearings-Steel balls89 GB/T 309-1984 滚动轴承滚针Rolling bearings--Needle rollers90 GB/T 794-1993 加强半圆头方颈螺栓Strengthened cap head square neck bolts91 GB/T 798-1988 活节螺栓Eye bolts92 GB/T 799-1988 地脚螺栓Eyelet bolts93 GB/T 800-1988 沉头双榫螺栓Flat countersunk double nib bolts94GB/T 802-1988 组合式盖形螺母Acorn nuts95 GB/T 804-1988 球面六角螺母Hexagon nuts with raised face96 GB/T 805-1988 扣紧螺母Tight nuts97 GB/T 806-1988 滚花高螺母Knurled nut with collar98 GB/T 807-1988 滚花薄螺母Knurled nuts99 GB/T 808-1988 小六角特扁细牙螺母Small hexagon thin nuts-Fine pitch thread100 GB/T 809-1988 嵌装圆螺母Insert round nuts101 GB/T 810-1988 小圆螺母Small round nuts102 GB/T 812-1988 圆螺母Round nuts103 GB/T 815-1988 端面带孔圆螺母Round nuts with drilled holes in one face104 GB/T 816-1988 侧面带孔圆螺母Round nuts with set pin holes in side105 GB/T 817-1988 带槽圆螺母Slotted round nuts106 GB/T 818-1985 十字槽盘头螺钉Cross recessed pan head screws107 GB/T 819-1985 十字槽沉头螺钉Cross recessed countersunk head screws108 GB/T 820-1985 十字槽半沉头螺钉Cross recessed raised countersunk head screws109 GB/T 821-1988 方头倒角端紧定螺钉Square set screws with chamfered end110 GB/T 822-1988 十字槽圆柱头螺钉Cross recessed cheese head serews111 GB/T 823-1988 十字槽小盘头螺钉Cross recessed small pan head screws112 GB/T 824-1976 圆柱头内花键螺钉Screws,fluted socket head113 GB/T 825-1988 吊环螺钉Eyebolts114 GB/T 827-1986 标牌铆钉Rivets for name plate115 GB/T 828-1988 开槽盘头定位螺钉Slotted pan head set setscrews with dog point116 GB/T 829-1988 开槽圆柱端定位螺钉Slotted setscrews with dog point117 GB/T 830-1988 开槽圆柱头轴位螺钉Slotted cheese head screws with shoulder118 GB/T 831-1988 开槽无头轴位螺钉Slotted shoulder screws119 GB/T 832-1988 开槽带孔球面圆柱头螺钉Slotted capstan screws120 GB/T 833-1988 开槽大圆柱头螺钉121 GB/T 834-1988 滚花高头螺钉Knurled thumb screws 122 GB/T 835-1988 滚花平头螺钉Knurled screws 123 GB/T 836-1988 滚花小头螺钉Knurled screws with small head 124 GB/T 837-1988 开槽盘头不脱出螺钉Slotted pan head screws with waisted shank 125 GB/T 838-1988 六角头不脱出螺钉Hexagon screws with waisted shank 126 GB/T 839-1988 滚花头不脱出螺钉Knurled thumb screws with waisted shank 127 GB/T 840-1988 塑料滚花头螺钉Plastic diamond knurlhead screws 128 GB/T 845-1985 十字槽盘头自攻螺钉Cross recessed pan head tapping screws 129 GB/T 846-1985 十字槽沉头自攻螺钉Cross recessed countersunk head tapping screws 130 GB/T 847-1985 十字槽半沉头自攻螺钉Cross recessed raised countersunk head tapping screws 131 GB/T 848-1985 小垫圈--A级Plain washers--Small series--Product grade A 132 GB/T 849-1988 球面垫圈Weshers with ball face 133 GB/T 850-1988 锥面垫圈Washers with cone face 134 GB/T 851-1988 开口垫圈Washers with split 135 GB/T 852-1988 工字钢用方斜垫圈Square taper washers for I section 136 GB/T 853-1988 槽钢用方斜垫圈Square taper washers for slot section 137 GB/T 854-1988 单耳止动垫圈Tab washers with long tab 138 GB/T 855-1988 双耳止动垫圈Tab washers with long tab and wing 139 GB/T 856-1988 外舌止动垫圈External tab washers 140 GB/T 858-1988 圆螺母用止动垫圈Tab washers for round nut 141 GB/T 859-1987 轻型弹簧垫圈Single coil spring lock washers,Light type 142 GB/T 860-1987 鞍形弹性垫圈Curved spring washers 143 GB/T 861.1-1987 内齿锁紧垫圈Lock washers internal teeth 144 GB/T 861.2-1987 内锯齿锁紧垫圈Serrated lock washers internal teeth 145 GB/T 862.1-1987 外齿锁紧垫圈Lock washers external teeth 146 GB/T 862.2-1987 外锯齿锁紧垫圈Serrated lock washers external teeth 147 GB/T 863.1-1986 半圆头铆钉(粗制) Round head rivets--Black 148 GB/T 863.2-1986 小半圆头铆钉(粗制) Round head rivets with small head--Black 149 GB/T 864-1986 平锥头铆钉(粗制) Cone head rivets--Black 150 GB/T 865-1986 沉头铆钉(粗制) Countersunk head rivets-Black 151 GB/T 866-1986 半沉头铆钉(粗制) Oval countersunk head rivets--Black 152 GB/T 867-1986 半圆头铆钉Round head rivets 153 GB/T 868-1986 平锥头铆钉Cone head rivets 154 GB/T 869-1986 沉头铆钉Countersunk head rivets 155 GB/T 870-1986 半沉头铆钉Oval countersunk head rivets 156 GB/T 871-1986 扁圆头铆钉Flat round head rivets 157 GB/T 872-1986 扁平头铆钉Thin head rivets 158 GB/T 873-1986 扁圆头半空心铆钉Oval head semi-tubular rivets 159 GB/T 874-1986 120°沉头半空心铆钉120 degree countersunk head semi-tubular rivets 160 GB/T 875-1986 偏平头半空心铆钉Thin head semi-tubular rivet 161 GB/T 876-1986 空心铆钉Tubular rivets 162 GB/T 877-1986 开尾圆锥销Taper pins with split 163 GB/T 878-1986 螺纹圆柱销Parallel pins with external thread 164 GB/T 879-1986 弹性圆柱销Spring-type straight pins—Slotted 165 GB/T 880-1986 带孔销Pins with split pin hole 166 GB/T 881-1986 螺尾锥销Taper pins with external thread 167 GB/T 882-1986 销轴Clevis pins with head 168 GB/T 883-1986 锥销锁紧挡圈Lock rings with cone pin 169 GB/T 884-1986 螺钉锁紧挡圈Lock ring with screw 170 GB/T 885-1986 带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip 171 GB/T 886-1986 轴肩挡圈Rings for shoulder 172 GB/T 889-1986 1 型非金属嵌件六角锁紧螺母Prevailing torque type hexagon nuts (with non-metallic insert),style 1 173 GB/T 891-1986 螺钉紧固轴端挡圈Lock rings at the end of shaft with screw 174 GB/T 892-1986 螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt 175 GB/T 893.1-1986 孔用弹性挡圈--A型Circlips for holes--Type A 176 GB/T 893.2-1986 孔用弹性挡圈--B型Circlips for hole--Type B 177 GB/T 894.1-1986 轴用弹性挡圈--A型Circlips for shaft--Type A 178 GB/T 894.2-1986 轴用弹性挡圈--B型Circlips for shaft--Type B 179 GB/T 895.1-1986 孔用钢丝挡圈Roundwire snap rings for hole 180 GB/T 895.2-1986 轴用钢丝挡圈Roundwire snap rings for shaft 181 GB/T 896-1986 开口挡圈"E" rings 182 GB/T 897-1988 双头螺柱bm=1d Double end studs--bm=1d 183 GB/T 898-1988 双头螺柱bm=1.25d Double end studs bm=1.25d 184 GB/T 899-1988 双头螺柱bm=1.5d Double end studs bm=1.5d 185 GB/T 900-1988 双头螺柱bm=2d Double end studs bm=2d 186 GB/T 901-1988 等长双头螺柱B级Double end studs (clamping type)--Product grade B 187 GB/T 902.1-1989 手工焊用焊接螺柱Weld studs for manual welding 188 GB/T 902.2-1989 机动弧焊用焊接螺柱Weld studs for arc welding 189 GB/T 902.3-1989 储能焊用焊接螺柱Weld studs for capacitor discharge welding 190 GB/T 921-1986 钢丝锁圈Round wire circlips 191 GB/T 922-1986 木螺钉技术条件Specifications for wood screws 192 GB/T 923-1988 盖形螺母Acorn nuts 193 GB/T 925-1988 轻型六角自锁螺母Self-locking nuts,hexagon light 194 GB/T 927-1988 球面六角自锁螺母Self-locking nuts,hexagon sphere 195 GB/T 929-1988 单耳托板自锁螺母Self-locking nuts,singlelug, anchor 196 GB/T 930-1988 双耳托板自锁螺母Self-locking nuts,twolug, anchor 197 GB/T 931-1988 角形托板自锁螺母Self-locking nuts,angle, anchor 198 GB/T 932-1988 气密单耳托板自锁螺母Self-locking nuts,singlelug, anchor, sealing, 199 GB/T 933-1988 气密双耳托板自锁螺母Self-locking nuts,twolug, anchor, sealing 200 GB/T 937-1988 成组游动托板自锁螺母Self-locking nuts, anchor, floating,Gang channel 201 GB/T 938-1988 游动自锁螺母Self-locking nuts, floating 202 GB/T 939-1988 单耳托板自锁螺母保护罩Boots for self-locking nuts, singlelug, anchor 203 GB/T 940-1988 双耳托板自锁螺母保护罩Boots for self-locking nuts,twolug, anchor 204 GB/T 941-1988 角形托板自锁螺母保护罩Boots for self-locking nuts,angle, anchor 205 GB/T 943-1988 自锁螺母技术条件Procurement specification for self-locking nuts 206 GB/T 945-1976 十字槽球面中柱头螺钉Screws,cross recessed,thin raised cheese head 207 GB/T 946-1988 开槽球面圆柱头轴位螺钉Slotted raised cheese head with shoulder 208 GB/T 947-1988 开槽球面大圆柱头螺钉Slotted large raised cheese head screws 209 GB/T 948-1988 开槽沉头不脱出螺钉Slotted countersunk head screws with waisted shank 210 GB/T 949-1988 开槽半沉头不脱出螺钉Slotted raised countersunk head screws with waisted shank 211 GB/T 950-1986 十字槽圆头木螺钉Cross recessed round head wood screws 212 GB/T 951-1986 十字槽沉头木螺钉Cross recessed countersunk head wood screws 213 GB/T 952-1986 十字槽半沉头木螺钉Cross recessed raised countersunk head wood screws 214 GB/T 953-1988 等长双头螺柱C级Double end studs (clamping type)--Product grade C 215 GB/T 954-1986 120°沉头铆钉120°degree countersunk head rivets 216 GB/T 955-1987 波形弹性垫圈Wave spring washers 217 GB/T 956.1-1987 锥形锁紧垫圈Countersunk external toothed lock washers 218 GB/T 956.2-1987 锥形锯齿锁紧垫圈Countersunk serrated external toothed lock washers 219 GB/T 959.1-1986 挡圈技术条件--弹性挡圈Specifications for ring—Circlips 220 GB/T 959.2-1986 挡圈技术条件--钢丝挡圈Specifications for ring—Round wire snap rings 221 GB/T 959.3-1986 挡圈技术条件--切制挡圈Specifications for ring—Cutting rings 222 GB/T 960-1986 夹紧挡圈Grip rings 223 GB/T 961-1988 单耳托板自锁螺母垫片Spacers for self-locking nuts,singlelug, anchor 224 GB/T 962-1988 双耳托板自锁螺母垫片Spacers for self-locking nuts,twolug, anchor 225 GB/T 963-1988 角形托板自锁螺母垫片Spacers for self-locking nuts,angle, anchor 226 GB/T 973-1976 十字槽扁圆头螺钉Screws,cross recessed,oval head 227 GB/T 974-1976 十字槽120°半沉头螺钉Screws,cross recessed,120°raised countersunk head 228 GB/T 975-1986 管状铆钉Pipe type rivets 229 GB/T 1007-1976 小六角较扁螺母Small hexagon medium thin nuts 230 GB/T 1009-1978 螺母专用技术条件Specified specifications for nuts 231 GB/T 1011-1986 大扁圆头铆钉Truss head rivets 232 GB/T 1012-1986 120°半沉头铆钉120°degree oval countersunk rivets 233 GB/T 1013-1986 平锥头半空心铆钉Cone head semi-tubuler rivets234 GB/T 1014-1986 大扁圆头半空心铆钉Truss head semi-tubuar rivets 235 GB/T 1015-1986 沉头半空心铆钉Countersunk head semi-tublar rivets 236 GB/T 1016-1986 无头铆钉Headless rivets 237 GB/T 1017-1978 铆钉专用技术条件Specified specifications for rivets 238 GB/T 1021-1976 角形垂直单耳止动垫圈Lock washers with angular upturn tab perpendicular to the lug 239 GB/T 1022-1976 角形单耳止动垫圈Lock washers with angular upturn tab in line to the lug 240 GB/T 1023-1976 角形垂直外舌止动垫圈Lock washers with angular upturn tab perpendicular to the external tab241 GB/T 1024-1976 角形外舌止动垫圈Lock washers with angular upturn tab in line to the external tab 242 GB/T 1030-1988 内球面垫圈Inner sphere washers 243 GB/T 1047-1995 管道元件的公称通径Nominal size for pipe components 244 GB/T 1048-1990 管道元件公称压力Nominal pressure for pipe components 245 GB/T 1095-1979 平键键和键槽的剖面尺寸Parallel keys--Dimensions of cross sections and keyways 246 GB/T 1096-1979 普通平键型式尺寸Plain parallel keys--Types and dimensions 247 GB/T 1097-1979 导向平键型式尺寸Feather keys--Types and dimensions 248 GB/T 1098-1979 半圆键键和键槽的剖面尺寸Semi-circular (Woodruff) keys--Dimensions of cross sections and keyways 249 GB/T 1099-1979 半圆键型式尺寸Woodruff keys--Types and dimensions 250 GB/T 1144-1987 矩形花键尺寸、公差和检验Straight-sided spline—Dimensions tolerances and verification 251 GB/T 1168-1976 螺柱技术条件Studs--Technical requirements 252 GB/T 1228-1991 钢结构用高强度大六角头螺栓High strength bolts with large hexagon headfor steel structures 253 GB/T 1229-1991 钢结构用高强度大六角螺母High strength large hexagon nuts for steel structures 254 GB/T 1230-1991 钢结构用高强度垫圈High strength plain washers for steel structures 255 GB/T 1231-1991 钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件Specifications of high strength bolts with large hexa-gon head, large hexagon nuts, plain washers for steel structures 256 GB/T 1237-1988 紧固件的标记方法Designation system for fasteners 257 GB/T 1337-1988 六角自锁螺母Self-locking nuts,hexagon 258 GB/T 1338-1988 小六角扁自锁螺母Self-locking nuts,reduced hexagon oblate 259 GB/T 1339-1988 小六角自锁螺母Self-locking nuts,reduced hexagon 260 GB/T 1340-1988 成组游动托板自锁螺母支架Supports for self-locking nuts,anchor floating,Gang channel 261 GB/T 1356-1988 淅开线圆柱齿轮基本齿廓Basic rack tooth profile of involute cylindrical gears 262 GB/T 1357-1987 渐开线圆柱齿轮模数Modules of involute cyindrical gears 263 GB/T 1563-1979 楔键键和键槽的剖面尺寸Taper keys--Cross section dimensions of keys and keyways 264 GB/T 1564-1979 普通楔键型式尺寸Taper keys for general use--Types and dimensions 265 GB/T 1565-1979 钩头楔键型式尺寸Gib-head taper keys--Types and dimensions 266 GB/T 1566-1979 薄型平键键和键槽的剖面尺寸Thin flat keys--Cross section dimensions and keyways 267 GB/T 1567-1979 薄型平键型式尺寸Thin flat keys--Types and dimensions 268 GB/T 1840-1989 圆弧圆柱齿轮模数Modules of cylindrical gear with circular arc profiles 269 GB/T 1974-1980 切向键及其键槽Tangential keys and keyways 270 GB/T 2362-1990 小模数渐开线圆柱齿轮基本齿廓Basic rack tooth profile of fine-pitch involute cylindrical gears 271 GB/T 2363-1990 小模数渐开线圆柱齿轮精度Accuracy of fine-pitch involute cylindrical gears 272 GB/T 2509-1981 滑动轴承铜合金整体轴套形式、尺寸与公差Copper alloy integrated shaft sleeves for plain bearings--Types, dimensions and tolerances 273 GB/T 2510-1981 滑动轴承铜合金带挡边整体轴套形式、尺寸与公差Copper alloy integrated shaft sleeves for plain bearings with gears--Types, dimensions and tolerances 274 GB/T 2511-1981 滑动轴承铜合金整体轴套技术条件Copper alloy integrated shaft sleeves--Technical requirements 275 GB/T 2555-1981 一般用途管法兰连接尺寸Pipe flange connectors for ordinary use--Mounting dimensions 276 GB/T 2556-1981 一般用途管法兰密封面形状和尺寸Pipe flanges for ordinary use--Sealing surfaces--Forms and dimensions 277 GB/T 2672-1986 内六角花形盘头螺钉Hexagon lobular socket pan head screws 278 GB/T 2673-1986 内六角花形沉头螺钉Hexagon lobular socket countersunk head screws 279 GB/T 2674-1986 内六角花形半沉头螺钉Hexagon lobular socket raised countersunk head screws 280 GB/T 2685-1981 滑动轴承粉末冶金筒形轴承型式、尺寸与公差Powder metallurgy plain bearing--Cylindrical type--Types, dimensions and tolerances 281 GB/T 2686-1981 滑动轴承粉末冶金带挡边筒形轴承型式、尺寸与公差Powder metallurgy plain bearing--Rimed cylindrical type--Types, dimensions and tolerances 282 GB/T 2687-1981 滑动轴承粉末冶金球形轴承型式、尺寸与公差Powder metallurgy plain bearing--Spherical type--Types, dimensions and tolerances 283 GB/T 2688-1981 滑动轴承粉末冶金轴承技术条件Powder metallurgy plain bearing--Technical requirements 284 GB/T 2821-1992 齿轮几何要素代号Symbols for gear geometrical data 285 GB/T 2889-1994 滑动轴承术语Plain bearings--Terms, definitions and classification 286 GB/T 3098.1-1982 紧固件机械性能螺栓、螺钉和螺柱Mechanical properties of fasteners--Bolts, screws and studs 287 GB/T 3098.2-1982 紧固件机械性能螺母Mechanical properties of fasteners--Nuts 288 GB/T 3098.3-1982 紧固件机械性能紧定螺钉Mechanical properties of fasteners--Set screws 289 GB/T 3098.4-1986 紧固件机械性能--细牙螺母Mechanical properties of fasteners--Nuts with fine pitch thread 290 GB/T 3098.5-1985 紧固件机械性能自攻螺钉Mechanical properties of fasteners--Tapping screws 291 GB/T 3098.6-1986 紧固件机械性能不锈钢螺栓, 螺钉, 螺柱和螺母Mechanical properties of fasteners--Stainless steel bolts,screws, studs and nuts 292 GB/T 3098.7-1986 紧固件机械性能自攻锁紧螺钉粗牙普通螺纹系列Mechanical properties of fasteners--Thread forming screws--Metric coarse thread series 293 GB/T 3098.8-1992 紧固件机械性能耐热用螺纹连接副Mechanical properties of fasteners--Components for bolted connections made mainly from materials with a high temperature strength 294 GB/T 3098.9-1993 紧固件机械性能有效力矩型钢六角锁紧螺母Mechanical properties of fasteners--Prevailing torque type steel hexagon nuts 295 GB/T 3098.10 -1993 紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母Mechanical properties of fasteners-- Bolts, screws, studs and nuts made of non-ferrous metals 296 GB/T 3098.11-1995 紧固件机械性能自钻自攻螺钉Mechanicalproperties of fasteners--Self-drilling tapping screws 297 GB/T 3098.13-1996 紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm 298 GB/T 3098.12-1996 紧固件机械性能螺母锥形保证载荷试验Mechanical properties of fasteners--Cone proof load test on nuts 299 GB/T 3099-1982 螺栓、螺钉、螺母及附件名词术语Bolts, screws, nuts and accessories--Terminology and nomenclature 300 GB/T 3103.1-1982 紧固件公差螺栓、螺钉和螺母Tolerances for fasteners--Bolts, screws and nuts 301 GB/T 3103.2-1982 紧固件公差用于精密机械的螺栓、螺钉和螺母Tolerances for fasteners--Bolts, screws and nuts for fine mechanics 302 GB/T 3103.3-1982 紧固件公差平垫圈Tolerances for fasteners--Washers 303 GB/T 3103.4-1992 紧固件公差耐热用螺纹连接副Tolerances for fasteners--Components for bolted connections made mainly from materials with a high temperature strength 304 GB/T 3104-1982 紧固件六角产品的对边宽度Fasteners--Widths across flats of hexagon products 305 GB/T 3105-1982 螺栓和螺钉的头下圆角半径Radii under the head of bolts and screws 306 GB/T 3106-1982 螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度Bolts, screws and studs--Nominal lengths, and thread lengths for general purpose bolts 307 GB/T 3162-1991 滑动轴承薄壁轴瓦尺寸、结构要素与公差Plain bearings—Thin-walled bearing shells—Dimensions, structure elements and tolerances 308 GB/T 3287-1982 可锻铸铁管路连接件技术条件Technical requirements of malleable cast iron pipefittings 309 GB/T 3288-1982 可锻铸铁管路连接件验收规则Delivery requirements of malleable cast iron pipe fittings 310 GB/T 3289.1-1982 可锻铸铁管路连接件型式尺寸管件结构尺寸表Malleable cast iron pipe fittings--Type size--Dimensions list of pipe fittings structure 311 GB/T 3289.2-1982 可锻铸铁管路连接件型式尺寸弯头内外丝弯头Malleable cast iron pipe fittings--Type size--Elbows male and female elbows 312 GB/T 3289.3-1982 可锻铸铁管路连接件型式尺寸45°弯头45°内外丝弯头Malleable cast iron pipe fittings--Type size--Elbows 45°, male and female elbows 45° 313 GB/T 3289.4-1982 可锻铸铁管路连接件型式尺寸异径弯头Malleable cast iron pipe fittings--Type size--Reducing elbows 314 GB/T 3289.5-1982 可锻铸铁管路连接件型式尺寸异径内外丝弯头Malleable cast iron pipe fittings--Type size--Male and female reducing elbows 315 GB/T 3289.6-1982 可锻铸铁管路连接件型式尺寸侧孔弯头Malleable cast iron pipe fittings--Type size--Side outlet elbows 316 GB/T 3289.7 -1982 可锻铸铁管路连接件型式尺寸月弯内外丝月弯外丝月弯Malleable cast iron pipe fittings-- Type size--Return bends, male and female return bends, thread return bends 317 GB/T 3289.8-1982 可锻铸铁管路连接件型式尺寸45°月弯45°内外丝月弯45°外丝月弯Malleable cast iron pipe fittings--Type size--Long sweep bends 45°，male and female long sweep bends 45°,male long sweep bends 45° 318 GB/T 3289.9-1982 可锻铸铁管路连接件型式尺寸U型弯头Malleable cast iron pipe fittings--Type size--U-Elbows(return bends) 319 GB/T 3289.10-1982 可锻铸铁管路连接件型式尺寸三通内外丝三通Malleable cast iron pipe fittings--Type size--Tees, male and female tees 320 GB/T 3289.11-1982 可锻铸铁管路连接件型式尺寸异径内外丝三通Malleable cast iron pipe fittings--Type size--Male and female reducing tees 321 GB/T 3289.12-1982 可锻铸铁管路连接件型式尺寸中大异径三通Malleable cast iron pipe fittings--Type size--Medium-large reducing tees [tees(increasing on the branch)] 322 GB/T 3289.13-1982 可锻铸铁管路连接件型式尺寸侧大异径三通Malleable cast iron pipe fittings--Type size--Lateral-large reducing tees 323 GB/T 3289.14-1982 可锻铸铁管路连接件型式尺寸中小异径三通Malleable cast iron pipe fittings--Type size--Medium-less reducing tees 324 GB/T 3289.15-1982 可锻铸铁管路连接件型式尺寸侧小异径三通Malleable cast iron pipe fittings--Type size--Lateral-less reducing tees 325 GB/T 3289.16-1982 可锻铸铁管路连接件型式尺寸中小偏心异径三通Malleable cast iron pipe fittings--Type size--Medium-less eccentric reducing tees 326 GB/T 3289.17-1982 可锻铸铁管路连接件型式尺寸45°三通Y型三通Malleable cast iron pipe fittings--Type size--Tees45°, Y pieces(tees) 327 GB/T 3289.18-1982 可锻铸铁管路连接件型式尺寸Y型异径三通Malleable cast iron pipe fittings--Type size--Y Piece reducing(tees) 328 GB/T 3289.19-1982 可锻铸铁管路连接件型式尺寸侧孔三通Malleable cast iron pipe fittings--Type size--Side outlet tees 329 GB/T 3289.20-1982 可锻铸铁管路连接件型式尺寸四通Malleable cast iron pipe fittings--Type size--Crosses 330 GB/T 3289.21-1982 可锻铸铁管路连接件型式尺寸异径四通Malleable cast iron pipe fittings--Type size--Reducing crosses 331 GB/T 3289.22-1982 可锻铸铁管路连接件型式尺寸外接头内外丝接头Malleable cast iron pipe fittings--Type size--Male joints(sockets), male and female joints (sockets) 332 GB/T 3289.23-1982 可锻铸铁管路连接件型式尺寸无方内接头Malleable cast iron pipe fittings--Type size--No-square inner joint (nipples) 333 GB/T 3289.24-1982 可锻铸铁管路连接件型式尺寸异径外接头Malleable cast iron pipe fittings--Type size--Reducing male joints (sockets) 334 GB/T 3289.25-1982 可锻铸铁管路连接件型式尺寸偏心异径外接头Malleable cast iron pipe fittings--Type size--Eccentric reducing male joints (sockets) 335 GB/T 3289.26-1982 可锻铸铁管路连接件型式尺寸内接头Malleable cast iron pipe fittings--Type size--Inner joints (nipples hexagon) 336 GB/T 3289.27-1982 可锻铸铁管路连接件型式尺寸异径内接头Malleable cast iron pipe fittings--Type size--Reducing inner joints(nipples hexagon) 337 GB/T 3289.28-1982 可锻铸铁管路连接件型式尺寸内外螺丝Malleable cast iron pipe fittings--Type size--Male and female screws (bushings) 338 GB/T 3289.29-1982 可锻铸铁管路连接件型式尺寸通丝外接头Malleable cast iron pipe fittings--Type size--Through thread male joint (sockets) 339 GB/T 3289.30-1982 可锻铸铁管路连接件型式尺寸锁紧螺母Malleable cast iron pipe fittings--Type size--Backnuts 340 GB/T 3289.31-1982 可锻铸铁管路连接件型式尺寸外方管堵Malleable cast iron pipe fittings--Type size--Outer-square plugs 341 GB/T 3289.32-1982 可锻铸铁管路连接件型式尺寸带边外方管堵Malleable cast iron pipe fittings--Type size--Outer-square beaded plugs 342 GB/T 3289.33-1982 可锻铸铁管路连接件型式尺寸内方管堵Malleable cast iron pipe fittings--Type size--Inner-square plugs 343GB/T 3289.34-1982 可锻铸铁管路连接件型式尺寸管帽Malleable cast iron pipe fittings--Type size--Tube caps (caps plugs) 344 GB/T 3289.35 -1982 可锻铸铁管路连接件型式尺寸活接弯头内外丝活接弯头Malleable cast iron pipe fittings-- Type size--Union elbows, male and female union elbows 345 GB/T 3289.36-1982 可锻铸铁管路连接件型式尺寸活接三通Malleable cast iron pipe fittings--Type size--Union tees 346 GB/T 3289.37-1982 可锻铸铁管路连接件型式尺寸平形活接头Malleable cast iron pipe fittings--Type size--Parallel unions 347 GB/T 3289.38-1982 可锻铸铁管路连接件型式尺寸锥形活接头Malleable cast iron pipe fittings--Type size--Taper unions 348 GB/T 3289.39-1982 可锻铸铁管路连接件型式尺寸平形活接头垫圈Malleable cast iron pipe fittings--Type size--Parallel union gaskets 349 GB/T 3374-1992 齿轮基本术语Basic terminology of gears 350 GB/T 3478.1-1995 圆柱直齿渐开线花键模数基本齿廓公差Straight cylindrical involute splines--Modules, basic rack profiles and tolerances 351 GB/T 3478.2-1995 圆柱直齿渐开线花键30°压力角尺寸表Straight cylindrical involute splines--30°pressure angle dimenslons tables 352 GB/T 3478.3-1995 圆柱直齿渐开线花键37.5°压力角尺寸表Straight cylindrical involute splines--37.5°pressure angle dimensions tables 353 GB/T 3478.4-1995 圆柱直齿渐开线花键45°压力角尺寸表Straight cylindrical involute splines--45°pressure angle dimensions tables 354 GB/T 3478.5-1995 圆柱直齿渐开线花键检验方法Straight cylindrical involute splines--Inspection methods 355 GB/T 3478.6-1995 圆柱直齿渐开线花键30°压力角M值和W值Straightcylindrical involute splines--30°pressurengle M and W values 356 GB/T 3478.7-1995 圆柱直齿渐开线花键37.5°压力角M值和W值Straight cylindrical involute splines--37.5°pressure angle M and W values 357 GB/T 3478.8-1995 圆柱直齿渐开线花键45°压力角M值和W值Straight cylindrical involute splines--45°pressure angle-M and W values 358 GB/T 3478.9-1995 圆柱直齿渐开线花键量棒Straight cylindrical involute splines--Measuring pin 359 GB/T 3507-1983 机械式联轴器公称扭矩系列Nominal torque series of the mechanical coupling 360 GB/T 3632-1995 钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures360 GB/T 3632-1995 钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures 361 GB/T 3633-1995 钢结构用扭剪型高强度螺栓连接副技术条件Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures 362 GB/T 3733.1-1983 卡套式端直通管接头Straight thread connector--Assembly 363 GB/T 3733.2-1983 卡套式端直通接头体Straight thread connector--Body 364 GB/T 3734.1-1983 卡套式锥螺纹直通管接头Male connector--Assembly 365 GB/T 3734.2-1983 卡套式锥螺纹直通接头体Male connector--Body 366 GB/T 3735.1-1983 卡套式端直通长管接头Straight thread long connector--Assembly 367 GB/T 3735.2-1983 卡套式端直通长接头体Straight thread long connector--Body 368 GB/T 3736.1-1983 卡套式锥螺纹长管接头Male long connector--Assembly 369 GB/T 3736.2-1983 卡套式锥螺纹长接。
螺母相关的中英文词汇
螺母相关的中英文词汇1. 螺母（Nut）2. 螺纹（Thread）3. 紧固（Fastening）4. 螺栓（Bolt）5. 螺钉（Screw）6. 锁紧（Locking）7. 支撑（Support）8. 连接（Connection）9. 拧紧（Tightening）10. 螺距（Pitch）11. 材质（Material）12. 规格（Specification）13. 六角螺母（Hex Nut）14. 方螺母（Square Nut）15. 圆螺母（Round Nut）16. 带垫圈螺母（Washer Nut）17. 耐腐蚀螺母（CorrosionResistant Nut）18. 高强度螺母（HighStrength Nut）19. 碳钢螺母（Carbon Steel Nut）20. 不锈钢螺母（Stainless Steel Nut）掌握这些词汇，有助于我们在沟通交流、查阅资料和选购螺母时更加得心应手。
当然，让我们继续丰富这份文档，探索螺母的更多细节和应用场景。
螺母的应用与选择指南1. 应用场景机械制造：在机械设备中，螺母用于固定零部件，确保设备的稳定运行。
建筑工程：螺母在建筑领域扮演着连接钢筋、支架等重要角色，是建筑结构安全的关键。
航空航天：高强度、轻质化的螺母在航空航天领域尤为重要，它们承受着极端环境下的巨大压力。
家具制造：在家具组装中，螺母使得连接更加牢固，便于拆卸和重复使用。
2. 选择要点材质：根据使用环境选择合适的材质，如不锈钢螺母适用于潮湿或腐蚀性环境。
规格：确保螺母的规格与螺栓或螺钉相匹配，包括螺纹尺寸、螺距等。
性能要求：对于承受震动或冲击的场合，应选择具有防松性能的螺母，如带齿螺母或涂有特殊涂层的螺母。
美观与实用性：在某些应用中，螺母的外观和设计也是考虑因素，如六角螺母因其外形特点而便于工具操作。
3. 保养与维护定期检查：定期检查螺母是否松动或损坏，及时更换以确保设备安全。
螺栓_螺母英文简称_及术语
螺栓螺母英文简称及术语No. 单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread P T 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制48 NFE / 法标点图进入相册地脚栓点图进入相册吊环栓点图进入相册组合栓点图进入相册六角螺栓点图进入相册弹垫点图进入相册膨胀栓螺丝的简称及术语50 Quality / 质量51 surface hardness 表面硬度52 product treatment 表面处理53 plating 电镀54 heat 热55 Screws And Shafts For Motorcycle Or Bicy cle 机(踏)车用螺丝、轴心56 Screws And Shafts For Sewing Maching 针车用螺丝、轴心57 Socket Set Screws 止付螺丝58 Stainless Steel Coarse Thread Screws 不锈钢宽牙螺丝59 Stainless Steel High-Low Thread Screws 不锈钢高低牙螺丝60 Stainless Steel Machine Screws 不锈钢机械螺丝61 Stainless Steel Self Drilling Screws 不锈钢钻尾螺丝62 Stainless Steel Self Tapping Screws 不锈钢自攻螺丝63 Stainless Steel Thread Cutting Screws 不锈钢自削螺丝64 Stainless Steel Tri-Lobular Thread Screws 不锈钢三角牙螺丝63 Steel Hex Coupling Nuts 碳钢六角螺帽66 Heavy Duty Expansion Anchors 不锈钢重载胀栓67 Strut Nuts 弹簧螺帽68 Loxin Masonry Anchors 两片夹69 Set Bolts 定位螺栓70 Drop in Setting Tools 工具棒71 Elephant foot anchors 象脚壁虎72 Concrete Insert 水泥预埋件73 Drop in Anchor with Lip 翻边胀轴74 Legs Drywall Anchors 冲件75 Hex Cap Nuts 六角盖头螺帽76 Hex Serrated Nuts 六角锯齿螺帽77 Hex Flange Nuts 六角轮缘螺帽78 Hex Coupling Nuts(High Nuts) 高脚螺帽78 Round Nuts 圆螺帽79 Square Nuts 四角螺帽80 Pipe Nuts 管用螺帽81 Wheel Nuts 轮壳螺帽82 Wing Nuts 蝶型螺帽83U Nuts U形螺帽84 T Nuts T形螺帽85Eye Nuts 环首螺帽86Kep Nuts 齿形螺帽87 Clinch Nuts 齿花螺帽88 Corten Steel Heavy Hex Nuts 耐候钢六角重型螺帽89 Weld Nuts 焊接螺帽90 Heigh Strength Nuts 高张力螺帽91 Structural Nuts 建业用螺帽92 Stainless Steel Nuts 不锈钢螺帽93 Brass Nuts 铜螺帽94 Aluminum Nuts 铝螺帽95 Alloy Steel Nuts 合金钢螺帽96 Heavy Duty Wheel Hub Nuts 重型车螺帽97 Acorn Cap Nuts 铁器焊接袋帽98 All-Metal Prevailing Torque Type Nuts 金属预置扭矩式螺帽99 Anchor Nuts 壁虎螺帽100 Big Size Nuts 大尺寸螺帽101 Closed End Acorn Nuts 铁盖袋帽102 Conical Washer Nuts 盘形华司螺帽103 Din 986 Domed Cap Nuts 铁盖+尼龙圈组合盖帽104 Flange Nylon Insert Lock Nuts 突缘尼龙盖帽105 Flat Waser Nuts 平面华司螺帽106 Hex Slotted Nut 六角割沟螺帽107 Self-Locking Nuts 自锁螺帽108 Sliding Nuts 制止螺帽109 Sln Self-Locking Nuts Sln-自动防松螺帽110 Special Nuts 其它特殊螺帽111Spring Nuts 弹簧螺帽11230 Stainless Steel Flange Nuts 不锈钢突缘螺帽113 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角轮缘尼龙螺帽114 Stainless Steel Heavy Hex Nuts 不锈钢六角重型螺帽115 Stainless Steel Hex Nuts 不锈钢六角螺帽1 16Stainless Steel Nylon Insert Lock Nuts 不锈钢尼龙嵌入螺帽1163775 Hex Nuts 普通六角螺帽117 heavy Hex Nuts 六角重型螺帽118 Hex Jam Nuts 薄型螺帽119 Nylon Insert Lock Nuts 尼龙嵌入防松螺帽120 Hex Machine Screw Nut 机械螺丝用六角螺帽121 Hex Head Cap Screws(Hex Bolts) 六角螺丝(栓)122 Hex Head Machine Bolts 六角机械螺丝123 Hex Lag Bolts 六角木牙螺丝124 Square Head Bolts 四角螺丝125 Carriage Bolts 马车螺丝126 Eye Bolts 环首螺丝127 Hex Socket Cap Screws 内六角孔螺丝128 Set Screws 固定螺丝129 Stud Bolts 螺椿栓130 Screw Studs 螺旋椿131 Wheel Bolts 轮壳螺栓132 Wing Screws 翼形螺丝133 Self Tapping Screws 自攻螺丝134 Thread Cutting Screws 自削螺丝135 Self Drilling Screws 钻尾螺丝136 Drive Screws 旋入螺丝137 Machine Screws 机械螺丝138 Wood Screws 木螺丝139 Furniture Screws 家具螺丝140 Chipboard Screws 塑板螺丝141 Drywall Screws 墙用螺丝142 Foundation Bolts 基础螺栓143 U Bolts U型螺栓144 Hook Bolts 勾头螺栓145 Toggle Bolts 套挂螺丝146 Flange Bolts 突缘螺丝147 Track Bolts 轨道螺栓(鱼尾螺丝) 148 Corten Steel Heavy Hex Bolts 耐候钢螺丝149 T.C.Bolts 扭矩控制螺栓150 High Strength Bolts 高张力螺栓151 Welding Studs 剪力钉(焊接螺丝)152 Screws And Washers Assembled(Sems) 螺丝附华司组合153 Big Size Bolts 大尺寸螺栓154 Stainless Steel Sheet Metal Screws 不锈钢小螺丝155 Stainless Steel Bolts 不锈钢大螺丝156 Brass Screws 铜螺丝157 Aluminum Screws 铝螺丝158 Alloy Steel Screws 合金钢螺丝159 Plastic Screws 塑料螺丝160 Particle Board Screws 复合材料用螺丝161 Titanium Alloy Bolts 钛合金螺丝162 Ti,Zr,Mo,Nb Pare Metal Bolts Parts 钛、锆、钼、铌等螺丝、零件、材料163 Thumb Screws 拇指螺丝164 Double End Screws Hanger Bolt 双头牙螺丝165 Automotive Fasteners 车辆(汽车)螺丝、螺帽166 Aerospace Fasteners 航天用螺丝167 Source Control Bolts 飞机特殊扣件168 Blind Bolts 拉栓169 Panel Fasteners 面板螺丝170 Elevator Bolts 电梯螺丝171 Square Set Screws 四角头固定螺丝172 T Head Bolts T头螺丝173 Step Bolts 大头马车螺丝174 One Way Lag Screws 单向螺丝175 Hose Clamp Screws 管夹螺丝176 Stainless Steel Hex Socket Cap Screws 不锈钢固定螺丝177 Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝177 Hinge Screws 铰链螺丝178 Container Screws 货柜螺丝179 Bi-Metal Self Drilling Screws 复合材料钻尾螺丝180 Trilobular Thread Screws 三角牙螺丝181 High Low Screws 高低牙螺丝182 Particle Board Screws 夹板用螺丝183 Toilet Closet Bolts 马桶螺丝1845 Special Longer Screws 特长螺丝185Building Fasteners 建业螺丝186Stainless Steel Hex Socket Cap Screws 不锈钢六角螺丝187 Special Screws Or Bolts 其它特殊螺丝188 Special Stainless Steel Screws 不锈钢特殊螺丝189 Collated Screws 链带螺丝190 Coarse Thread Screws 宽牙螺丝（粗牙螺丝）191 Concrete Screws 水泥螺丝192 Construction Bolts 板模螺丝193 Die Cast Wing Screws; Zinc Alloy 锌蝶螺丝194 Heavy Duty Wheel Hub Bolts 重型车螺丝195 Hex Socket Set Screws 内六角固定螺丝196 Particle Board Screws 复合材料用螺丝（夹板用）197 Plow Bolts 犁壁螺丝198 Stainless Steel Wood Screws 不锈钢木螺丝199 Toggle Bolts 套挂螺栓及螺丝200 Titanium Alloy Expansion Bolts 钛合金膨胀螺丝201 Hex Cap Nuts 六角盖头螺帽202 Hex Serrated Nuts 六角锯齿螺帽203 Hex Flange Nuts 六角轮缘螺帽204 Hex Coupling Nuts(High Nuts) 高脚螺帽205 Round Nuts 圆螺帽206 Square Nuts 四角螺帽207 Pipe Nuts 管用螺帽208 Wheel Nuts 轮壳螺帽2 09Wing Nuts 蝶型螺帽210 U Nuts U形螺帽211T Nuts T形螺帽212 Eye Nuts 环首螺帽213 Kep Nuts 齿形螺帽214 Clinch Nuts 齿花螺帽215 Corten Steel Heavy Hex Nuts 耐候钢六角重型螺帽216 Weld Nuts 焊接螺帽217 Heigh Strength Nuts 高张力螺帽218 Structural Nuts 建业用螺帽219 Stainless Steel Nuts 不锈钢螺帽220 Brass Nuts 铜螺帽221 Aluminum Nuts 铝螺帽222 Alloy Steel Nuts 合金钢螺帽223 Heavy Duty Wheel Hub Nuts 重型车螺帽224 Acorn Cap Nuts 铁器焊接袋帽225 All-Metal Prevailing Torque Type Nuts 金属预置扭矩式螺帽226 Anchor Nuts 壁虎螺帽227 Big Size Nuts 大尺寸螺帽228 Closed End Acorn Nuts 铁盖袋帽229 Conical Washer Nuts 盘形华司螺帽230 Din 986 Domed Cap Nuts 铁盖+尼龙圈组合盖帽231 Flange Nylon Insert Lock Nuts 突缘尼龙盖帽232 Flat Waser Nuts 平面华司螺帽233 Hex Slotted Nut 六角割沟螺帽234 Self-Locking Nuts 自锁螺帽235 Sliding Nuts 制止螺帽236 Sln Self-Locking Nuts Sln-自动防松螺帽237 Special Nuts 其它特殊螺帽238 Spring Nuts 弹簧螺帽23 9Stainless Steel Flange Nuts 不锈钢突缘螺帽240 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角轮缘尼龙螺帽241 Stainless Steel Heavy Hex Nuts 不锈钢六角重型螺帽242 Stainless Steel Hex Nuts 不锈钢六角螺帽243 Stainless Steel Nylon Insert Lock Nuts 不锈钢尼龙嵌入螺帽244 Hex Nuts 普通六角螺帽245 Heavy Hex Nuts 六角重型螺帽246 Nylon Insert Lock Nuts 尼龙嵌入防松螺帽247 Hex Jam Nuts 薄型螺248 Iron Or Steel Wire249 Iron Or Steel Wireod 线材盘元a.Z：Zine-Plated：镀锌b.Ni：Ni-Plated：镀镍 c.Tin-Plated：镀锡d.ZinePlated/GreenIridite：镀锌绿膜处理。
螺钉垫片螺母专业词汇
螺钉垫片螺母专业词汇————————————————————————————————作者: ————————————————————————————————日期:1. 铜件螺丝2.组合件螺丝３.家具螺丝 4.内六角圆柱头不锈钢螺丝 5.紧定螺丝６.拉钉7.精密螺丝８.平头一字螺丝 9.梅花头螺丝 10.十字外六角螺丝 1１.平头方颈螺丝12.十字外六角带介螺丝 1３.平头十字螺丝 14.大扁头螺丝１５.带介螺丝16．平圆十字螺丝 17.平头内六角螺丝 1８人字型螺丝 19 一字型螺丝20梅花安全型螺丝 21．三角型螺丝２2. 工字型螺丝２３.收尾螺丝２4．自攻螺丝 25.耐烙螺丝 26.三角牙螺丝２7.介子Dｅsｃrｉptioｎ in Chinｅse 英文品名Deｓcipｔｉoｎin Enｇlish圆锥销 Tapeｒ pins圆柱销 Parａｌlｅl pｉnｓ开槽圆柱头螺钉 Slotｔed ｃhｅeｓe head sｃrews开槽盘头螺钉Slotteｄｐａｎ head sｃｒews单耳止动垫圈 Tab waｓhers开口销 Spｌｉｔ coｏter piｎｓ开槽半沉头木螺钉 Slｏtｔed raiseｄ cｓk head wｏod screws开槽半圆头木螺钉 Slotted roｕnｄhead wｏoｄｓcrewｓ开槽沉头木螺钉 Slｏtted counteｒsunk heａd ｗｏoｄ sｃrews平垫 Plaiｎwａshers平垫(带倒角) Mediun washers平垫 Plａiｎ wasｈeｒs重型弹垫Ｓpring locｋｗashｅrｓ，ｔaｎｇ eｎds标准弹垫Ｓpｒing locｋ wａshｅrs，squarｅ ends鞍形弹垫 Siｎgｌe coiｌsｐriｎg lｏcｋwaｓｈｅrs弹簧止动垫圈 Cuｒveｄsprinｇｗａshers波形弹垫 Wave spring waｓｈeｒｓT型方颈螺栓Ｔ-hｅad ｂｌotｓwith sｑuａre ｎecｋT型双接头螺栓 T－heaｄ bｏlts ｗith double niｐ螺纹圆锥销 Tａｐeｒ piｎs ｗｉtｈtｈreadｅd eｎdT型头螺栓 T－head boｌts蝶型螺母(美制) Winｇｎuｔs Ａmericａｆorm蝶型螺母（德制）Wiｎg ｎuts geｒmany ｆorm蝶型螺母（美制) Wiｎg ｓcrｅwｓ America fｏrm蝶型螺母(德制） Wing scｒｅｗｓgeｒmaｎｙ foｒm圆球型盖型螺母Ｂall kｎｏｂs开槽带孔球面圆柱头蚴钉Ｓｌotted caｐstan screwｓ开槽长圆柱端紧定螺钉 Slotted ｓet srｅwｓｗiｔh full doｇ pｏinｔ开槽平端紧定螺钉(半牙） Slｏｔteｄ set ｓrｅｗs ｗitｈ cｈamfereｄ eｎd小六角特薄细牙螺母Piｐ nutｓ with thｒead外舌止动垫圈 Eｘteｒnal tap小垫圈(用于圆柱头螺钉) Washｅｒs for cheｅｓe heａd ｓcｒｅws方斜垫圈(Ｕ型）Ｓquａre taper washeｒs fｏrU-section方斜垫圈（I型） Squaｒe ｔaｐer wａsherｓｆorI-sectｉonｓ方垫圈 Squaｒe wasｈｅrs开槽凹端紧定螺钉 Slotted ｓet wiｔｈ cup poｉnｔ六角薄螺母 Hexagｏn ｔｈin nuts细牙六角薄螺母 Hexａgon thｉn nｕtｓ木螺钉专用垫圈 Rounｄs washers foｒ woｏd constructions密封帽 Sealing caps,pｕsh-in tｙpｅ活节螺栓B型Eye ｂolts fｏｒm B内舌止动垫圈 Internａｌｔab washers双耳止动垫圈 Wasｈｅｒｓｗｉtｈ tｗo taｐs滚花高头螺钉 Knurlｅd thumb screws ｗｉtｈcoｌlar开槽滚花高头螺钉 Slotted ｋｎurled thumb sｃrews with cｏlｌar滚花高螺母Kｎurleｄthｕmb nuts wｉth cｏllaｒ滚花薄螺母Ｋｎｕrｌed tｈumｂｔhｉn ｎuts锁紧垫圈Ｓealinｇｗashers轴用弹性垫圈Ｒetaｉｎing rinｇs foｒ sｈafts(extｅrnal),cｉｒclｉps 孔用弹性垫圈Ｒetaｉnｉng rings ｆor borｅs(inｔerｎaｌ）,ciｒｃlips 方头带垫螺栓 Sｑｕａｒe ｈead ｂolts with ｃollar方头圆柱底端螺栓 Square ｈead bolts with ｈalf doｇｐoint方头带垫关圆底端螺栓Ｓquａre ｈead ｂolts with ｃoｌlar,haｌf dog ｐointＴ型槽螺母 T-ｓloｔ nuts单头螺柱Ｓingｌｅｅｎd stuｄs地脚螺栓 Masonrｙ boｌts带槽圆螺母 Slottｅd rounｄｎｕts端面带孔圆螺母 Rｏund nuts wｉth driｌlｅｄ holeｓ in onｅｆaｃe 开槽平端紧定螺钉 Slｏtted ｓet screwｓ wiｔｈ flat point开槽锥端紧定螺钉 Slotｔed set sｃｒews with coｎe point六角螺母Ｈexagｏn nuｔｓ方螺母-C Squaｒe nuts六角头螺钉 Hexagon screws六角头圆柱端紧定螺钉 Heｘagon set screws witｈ full dog point薄型方螺母-B Ｓｑｕarｅ nｕts withｏｕt bｅｖel(pressｅd nuts)六角头木螺钉 Hexｇoｎｈead ｗood scrｅw(cｏaｃh sｃｒeｗｓ)吊环螺钉 Lifｔiｎg eye ｂｏltｓ吊环螺母Lifｔing ｅye nuts圆锥型槽销Gｒoovｅd pｉns，taper grooveｄ圆锥型槽销(半槽) Gｒooved ｐiｎs,tapeｒ grｏovｅd half length平行槽销(带倒角) Gｒooveｄ pｉns，ｐａrａｌlel grｏovｅd full lｅｎｇtｈ前端凹槽槽销 Grooved pins,revervｅ groｏｖｅd hａlf ｌｅｎｇth中部凹槽槽销Grooveｄpins，cｅnteｒgroｏvｅd圆头槽销Grｏoveｄｐins with rｏuｎｄ heaｄ沉头槽销Ｇrooveｄ pins wｉｔh ｃouｎｔerｓunｋheaｄ六角螺母棒 Turnuｃklｅｓ(ceｎter ｐaｒtｓ）,ｍade out ｏf ｈｅxagon bａr 花蓝螺栓 Turｎｕckleｓwｉtｈ eye ｂolｔ anｄ hｏｏk bｏlt弹性圆柱销 Sｐriｎｇｐins,ｈeａvy tｙｐｅ组合式盖型螺母 Hｅｘagon domed ｃap nuｔs开槽圆螺母(配合沟头扳手) Slotteｄround nutｓfor hook ｓpaｍmeｒ圆螺母（带插销孔） Roｕnd nｕｔs ｗith ｓet hoｌes盘型弹簧垫圈 Disc spｒings喉箍Hｏse cｌａmｐｓ润滑油嘴(旋扭头) Lubrｉcaｔiｎg nipｐlｅs,buttｏn head管夹 Shacｋles fｏr ｃonｄuiltsU型螺栓 Sｔirrup ｂolts(U－ｂolts）球面垫圈 Spherical wａsheｒs,conicａl seats圆柱销Ｐaｒａlleｌ piｎｓ厚六角螺母Hexaｇｏｎnuts,1.5d厚六角法兰面螺母 Hexagon nuts,1.5ｄ with ｃolｌaｒ长六角螺母 Hexａgon nuts，3d外齿锁紧垫圈 Exterｎａl teｅtｈlｏcｋｗaｓhers内齿锁紧垫圈Ｉntｅrnal teeth loｃk wａshers外锯齿锁紧垫圈Exｔernaｌｔeeth ｓerrated lock wａｓｈerｓ内锯齿锁紧垫圈 Internａl teeｔh serrated loｃk ｗasherｓ开口挡圈 Retaininｇｒiｎgs for shafts(E-riｎgs),ｃircｌｉｐs平键(A型) Pａrallel keｙs(foｒｍＡ)半圆键 Wｏodｒuff keyｓ嵌环(支撑环） Thimbles机器螺钉和垫圈组合件Scｒeｗs aｎｄ waｓhｅｒs asｓembliｅs自攻螺钉和垫圈组合件 Tａppｉｎｇ screｗs anｄ wasｈer assｅmｂlies薄型带孔内六角圆柱螺钉 Heｘagｏｎｃocket ｈead ｃap screws wiｔh hole，low head 大六角头螺栓Hｅｘagｏn heaｄ bolts wｉtｈ large hｅaｄ(frictｉon ｇriｐ noltｓ)大六角螺母Hexaｇon nutｓ with laｒge wiｄeｔh acroｓs flat(ｆｒicｔioｎｇriｐnuｔs）大垫圈 Rｏund washerｓfoｒ fｒｉctｉoｎ grip ｂolｔs楔型方垫圈 Spｕare taｐer waｓheｒｓfｏｒ friｃｔion grip bｏlts ｏn T－六角法兰面螺母Ｈexagon ｆlangｅｎｕts全金属六角锁紧螺母（2型) Preｖailing ｔｏrｑuｅ tｙpe hｅxagon nuｔs，aｌl metallic ｎuts轻型弹性圆柱销Ｓｐriｎg pins,liｇｈｔｔype重型弹性圆柱销用垫圈Ｗaｓhers ｆor boltｓ wiｔh ｈeａvy ｔypｅｓpｒiｎg pinssISO公制螺纹螺钉（多种头型） Thｒeaｄｆｏｒminｇ scｒews for ISO-metriｃｔhｒｅad自攻自钻螺钉（多种头型） Sｅlｆ-drｉlling tａpｐing screｗs开槽切削螺纹螺钉（多种头型) Tｈreａd ｃutｔing scｒｅｗs十字槽切削螺纹螺钉（多种头型）Thｒead cutｔinｇ screws cross recessＴ型四爪螺母Ｔee nｕts with prongｅ钢结构用六角头螺栓连接副Ｈexagon ｈeaｄｆｉtted boｌts for sｔeel structurｅs 开槽盘头自攻螺钉Paｎhead tapping scrｅws ｗitｈ slｏt开槽沉头自攻螺钉counterｓunk ｆlat head tａpping ｓcreｗs with slot开槽半沉头自攻螺钉 Rａｉｓｅd sｏuntｅrsｕnk oval ｈead tａpping screｗs with slot六角头自攻螺钉Ｈexaｇon tappｉnｇ scｒewｓ圆柱头螺钉用弹簧垫圈 Spｒｉｎｇｌocｋ washers fｏr sｃrews with cｙｌindｒicaｌheａｄs十字槽盘头自攻螺攻Paｎ heaｄｔaｐｐｉnｇ screws with crosｓ reｃessed十字槽沉头自攻螺攻 Counｔersunk ｆｌat hｅad taｐping screｗs wiｔh cross recesｓed十字槽半沉头自攻螺攻 Raised couｎtｅｒsuｎk ovａl heａｄtａppinｇ sｃｒewｓwith cｒｏss 薄型内六角圆柱头螺钉 Hｅｘaｇon socｋeｔ head cap screｗｓ with,reduced ｈeａｄ十字槽盘头螺钉 Pan ｈead scｒｅws with crｏss recesseｄ钢结构用垫圈 Wａｓherｓ for stｅｅl struｃtｕres钢结构用六角头螺栓Ｈeｘagon ｈｅad bｏlts for sｔeeｌ sｔrucｔｕｒes内六角沉头螺钉 Hｅｘagon socｋｅｔ coutersunｋhｅad ｓcrews轴用钢丝挡圈 Rouｎdwire snap ｒinｇs for shaftｓ十字槽半沉头木螺钉 Cｒoss receｓｓｅd raiseｄ counterｓunk head wood screｗｓ十字槽圆头木螺钉 Croｓｓｒｅcｅｓｓed round heaｄ wood screws十字槽沉头木螺钉 Crosｓｒeｃeｓsed ｃoｕntｅrsunｋ head wood scrｅws螺纹护套（普通、自锁等) Ciol iｎserｔｓ,ｃoａrｓｅ,fine tｈread,ｓilf ｌocｋing 大外径垫圈Washerｓ,outside diａmeter appro.３ｄ弹簧卡子 spiｎg ｃottｅr fｏr a bolt平板螺栓 Bｅｌtinｇ bｏｌts(ｅleｖator ｂolｔs）干壁钉(墙板钉） Dｒy wａll sｃrews环型螺母 Liｆting nuｔs(eye nuts)圆螺母用止退垫圈 Taｂ waｓher ｆoｒslotted rouｎd nｕts。
螺丝名称的中英文对照表
螺丝名称的中英文对照表常用英文单词及简写形式No. 单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread P T 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标47 ISO / 国际标准48 NFE / 法标49 GB / 国家标准50 Quality / 质量51 surface hardness 表面硬度52 product treatment 表面处理53 plating 电镀54 heat 热55 Screws And Shafts For Motorcycle Or Bicycle 机(踏)车用螺丝、轴心56 Screws And Shafts For Sewing Maching 针车用螺丝、轴心57 Socket Set Screws 止付螺丝58 Stainless Steel Coarse Thread Screws 不锈钢宽牙螺丝59 Stainless Steel High-Low Thread Screws 不锈钢高低牙螺丝60 Stainless Steel Machine Screws 不锈钢机械螺丝61 Stainless Steel Self Drilling Screws 不锈钢钻尾螺丝62 Stainless Steel Self Tapping Screws 不锈钢螺丝class=a1>自攻螺丝63 Stainless Steel Thread Cutting Screws 不锈钢自削螺丝64 Stainless Steel Tri-Lobular Thread Screws 不锈钢三角牙螺丝65 Steel Ceiling Anchors 插片壁虎66 Drop in Anchors 内迫壁虎67 Steel Hit Anchors 碳钢锤钉壁虎68 Steel Hex Coupling Nuts 碳钢六角螺帽69 Wedge Anchors 强力车修壁虎70 Cut Anchors 外迫壁虎71 Chemical Anchors 化学壁虎72 Heavy Duty Expansion Anchors 不锈钢重载胀栓73 Tie Wire Anchors 鱼眼壁虎企眼长螺帽74 Hammer Drive Anchors 锌合金打入式壁虎75 Strut Nuts 弹簧螺帽76 Toggle Bolts (Spring Toggle & Gravity Toggle) 兰花夹系列77 Nylon Frame Anchors or Metalframe Anchors 门窗、地板专用壁虎78 Hollow Wall Anchors 石膏板中空壁虎79 Sleeve Anchors 套管式壁虎80 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors) 打入式壁虎鱼形尼龙壁虎81 Hit Anchors 强力式锤钉壁虎82 Bolt Anchors 电梯壁虎83 Heavy duty anchors 重载壁虎84 Loxin Masonry Anchors 两片夹85 Set Bolts 定位螺栓86 Short Strap Anchors 长型兰花夹87 Drop in Setting Tools 工具棒88 Elephant foot anchors 象脚壁虎89 Concrete Insert 水泥预埋件90 Drop in Anchor with Lip 翻边胀轴91 Legs Drywall Anchors 冲件92 Hex Cap Nuts 六角盖头螺帽93 Hex Serrated Nuts 六角锯齿螺帽94 Hex Flange Nuts 六角轮缘螺帽95 Hex Coupling Nuts(High Nuts) 高脚螺帽96 Round Nuts 圆螺帽97 Square Nuts 四角螺帽98 Pipe Nuts 管用螺帽99 Wheel Nuts 轮壳螺帽100 Wing Nuts 蝶型螺帽101 U Nuts U形螺帽102 T Nuts T形螺帽103 Eye Nuts 环首螺帽104 Kep Nuts 齿形螺帽105 Clinch Nuts 齿花螺帽106 Corten Steel Heavy Hex Nuts 耐候钢六角重型螺帽107 Weld Nuts 焊接螺帽108 Heigh Strength Nuts 高张力螺帽109 Structural Nuts 建业用螺帽110 Stainless Steel Nuts 不锈钢螺帽111 Brass Nuts 铜螺帽112 Aluminum Nuts 铝螺帽113 Alloy Steel Nuts 合金钢螺帽114 Heavy Duty Wheel Hub Nuts 重型车螺帽115 Acorn Cap Nuts 铁器焊接袋帽116 All-Metal Prevailing Torque Type Nuts 金属预置扭矩式螺帽117 Anchor Nuts 壁虎螺帽118 Big Size Nuts 大尺寸螺帽119 Closed End Acorn Nuts 铁盖袋帽120 Conical Washer Nuts 盘形华司螺帽121 Din 986 Domed Cap Nuts 铁盖+尼龙圈组合盖帽122 Flange Nylon Insert Lock Nuts 突缘尼龙盖帽123 Flat Waser Nuts 平面华司螺帽124 Hex Slotted Nut 六角割沟螺帽125 Self-Locking Nuts 自锁螺帽126 Sliding Nuts 制止螺帽127 Sln Self-Locking Nuts Sln-自动防松螺帽128 Special Nuts 其它特殊螺帽129 Spring Nuts 弹簧螺帽130 Stainless Steel Flange Nuts 不锈钢突缘螺帽131 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角轮缘尼龙螺帽132 Stainless Steel Heavy Hex Nuts 不锈钢六角重型螺帽133 Stainless Steel Hex Nuts 不锈钢六角螺帽134 Stainless Steel Nylon Insert Lock Nuts 不锈钢尼龙嵌入螺帽135 Hex Nuts 普通六角螺帽136 Heavy Hex Nuts 六角重型螺帽137 Hex Jam Nuts 薄型螺帽138 Nylon Insert Lock Nuts 尼龙嵌入防松螺帽139 Hex Machine Screw Nut 机械螺丝用六角螺帽140 Hex Head Cap Screws(Hex Bolts) 六角螺丝(栓)141 Hex Head Machine Bolts 六角机械螺丝142 Hex Lag Bolts 六角木牙螺丝143 Square Head Bolts 四角螺丝144 Carriage Bolts 马车。
螺母常见英文单词
Hardness
硬度
Wedge
楔形
Mechanical
机械的
Effect
效果
Load
荷载，负荷
Flat
平的，扁的
Performance
性能
Clean
干净的
Damage
受损
Undamaged
未受损害的
Shaft
轴
Structure
结构
Efficiency
效率
Remove
移动，拆除
Hex nut
六角螺母
Loose
松动
Anti-loose
防止松动
Safety
安全性
Level
等级
Safety level
安全等级
Vibration
震动
Impact test
冲击试验
Tighten
紧固
Fasten
紧ห้องสมุดไป่ตู้，牢固
Fastener
紧固件
Angle
角，角度
Basic type
基本型
Rim type
带法兰型
Flange
螺母常见英文单词汇总
Nut
螺母
Screw
螺杆
Hard
坚固的
Lock
锁紧
Size
尺寸/大小
Dimension
尺寸
Type
型号/类型
Material
材料
Quantity
数量
Weight
重量
Payment
付款
Delivery
运输
Price
价格
Quotation
五金词汇中英文对照
五金词汇中英文对照我们的生活中五金产品随处可见，那么你知道他的英文的意思吗?下面是小编给大家带来的五金词汇中英文对照，欢迎大家阅读参考，我们一起来看看吧!五金词汇中英文对照Normteile标准件Gewinde, Schrauben, Muttern螺纹、螺栓、螺母Gewinde螺纹Schrauben螺栓Gewindeauslufe螺纹收尾、肩距Gewindefreistiche螺纹退刀槽Senkungen锪孔、沉孔Mutter螺母Scheibe档圈Schlüsselweite扳手口尺寸Werkzeugvierkante工具四方柄Stifte, Bolzen, Niete, MitnehmerverbindungStifte 圆柱销Kerbstifte弹性销Bolzen轴销Keile 键Federn弹簧Keilwellenverbindung花键连接Blindniete抽芯铆钉Werkzeugkegel刀具、工具锥度Normteile für Vorrichtungen und Standzwerkzeuge工装夹具和冲裁模具的标准件Normteile für Vorrichtungen工装夹具的标准件T-NutenT型槽Kugelscheiben球面垫圈Normteile für Stanzwerkzeuge冲裁模具标准件Federn弹簧Antriebstechnik传动技术RiementriebeV型带传动Gleitlagerbuchsen滑动轴承轴瓦W?lzlager滚动轴承Nutmuttern圆螺母Passscheiben配合垫圈Stützscheiben调整垫圈Wellenenden轴端Wellendichtring轴用密封件RunddichtringO型密封圈机械工具Mechanic“s Toolsspanner 扳子 (美作:wrench1)double-ended spanner 双头扳子adjustable2 spanner, monkey wrench 活扳子,活络扳手box spanner 管钳子 (美作:socket wrench)calipers3 卡规pincers, tongs4 夹钳shears5 剪子wire cutters 剪线钳multipurpose pliers, universal pliers 万能手钳adjustable pliers 可调手钳punch 冲子drill 钻chuck 卡盘scraper 三角刮刀reamer 扩孔钻calliper gauge6 孔径规hacksaw 钢锯rivet7 铆钉nut 螺母locknut 自锁螺母,防松螺母bolt 螺栓pin, peg8, dowel 销钉washer 垫圈staple9 U形钉grease gun 注油枪oil can 油壶jack10 工作服机械加工抛光 polishing安装 to assemble扳手 wrench半机械化 semi-mechanization; semi-mechanized 半自动滚刀磨床 semi-automatic hob grinder半自动化 semi-automation; semi-automatic备件 spare parts边刨床 side planer变速箱 transmission gear柄轴 arbor11部件 units; assembly parts插床 slotting machine拆卸 to disassemble超高速内圆磨床 ultra-high-speed internal grinder 车床 lathe12; turning lathe车刀 lathe tool车轮车床 car wheel lathe车削 turning车轴 axle衬套 bushing 按英文字母排序3-Jaws indexing spacers 三爪、分割工具头A.T.C.system 加工中心机刀库Aluminum continuous melting & holding furnaces 连续溶解保温炉Balancing equipment 平衡设备Bayonet 卡口Bearing fittings 轴承配件Bearing processing equipment 轴承加工机Bearings 轴承Belt drive 带传动Bending machines 弯曲机Blades 刀片Blades,saw 锯片Bolts,screws & nuts 螺栓,螺帽及螺丝Boring heads 搪孔头Boring machines 镗床Cable making tools 造线机Casting,aluminium 铸铝Casting,copper 铸铜Casting,gray iron 铸灰口铁Casting,malleable iron 可锻铸铁Casting,other 其他铸造Casting,steel 铸钢Chain drive 链传动Chain making tools 造链机Chamfer machines 倒角机Chucks 夹盘Clamping/holding systems 夹具/支持系统CNC bending presses 电脑数控弯折机CNC boring machines 电脑数控镗床CNC drilling machines 电脑数控钻床CNC EDM wire-cutting machines 电脑数控电火花线切削机CNC electric discharge machines 电脑数控电火花机CNC engraving machines 电脑数控雕刻机CNC grinding machines 电脑数控磨床CNC lathes 电脑数控车床CNC machine tool fittings 电脑数控机床配件CNC milling machines 电脑数控铣床CNC shearing machines 电脑数控剪切机CNC toolings CNC刀杆CNC wire-cutting machines 电脑数控线切削机Conveying chains 输送链Coolers 冷却机Coupling 联轴器Crimping tools 卷边工具Cutters 刀具Cutting-off machines 切断机Diamond cutters 钻石刀具Dicing saws 晶圆切割机Die casting dies 压铸冲模Die casting machines 压铸机Dies-progressive 连续冲模Disposable toolholder bits 舍弃式刀头Drilling machines bench 钻床工作台Drilling machines,high-speed 高速钻床Drilling machines,multi-spindle 多轴钻床Drilling machines,radial 摇臂钻床Drilling machines,vertical 立式钻床drills 钻头Electric discharge machines(EDM) 电火花机Electric power tools 电动刀具Engraving machines 雕刻机Engraving machines,laser 激光雕刻机Etching machines 蚀刻机Finishing machines 修整机Fixture 夹具Forging dies 锻模Forging,aluminium 锻铝Forging,cold 冷锻Forging,copper 铜锻Forging,other 其他锻造Forging,steel 钢锻Foundry equipment 铸造设备Gear cutting machines 齿轮切削机Gears 齿轮Gravity casting machines 重力铸造机Grinder bench 磨床工作台Grinders,thread 螺纹磨床Grinders,tools & cutters 工具磨床Grinders,ultrasonic 超声波打磨机Grinding machines 磨床Grinding machines,centerless 无心磨床Grinding machines,cylindrical 外圆磨床Grinding machines,universal 万能磨床Grinding tools 磨削工具Grinding wheels 磨轮Hand tools 手工具Hard/soft and free expansion sheet making plant 硬(软)板(片)材及自由发泡板机组Heat preserving furnaces 保温炉Heating treatment funaces 熔热处理炉Honing machines 搪磨机Hydraulic components 液压元件Hydraulic power tools 液压工具Hydraulic power units 液压动力元件Hydraulic rotary cylinders 液压回转缸Jigs 钻模Lapping machines 精研机Lapping machines,centerless 无心精研机Laser cutting 激光切割Laser cutting for SMT stensil 激光钢板切割机Lathe bench 车床工作台Lathes,automatic 自动车床Lathes,heavy-duty 重型车床Lathes,high-speed 高速车床Lathes,turret 六角车床Lathes,vertical 立式车床Lubricants 润滑液Lubrication Systems 润滑系统Lubricators 注油机Machining centers,general 通用加工中心Machining centers,horizontal 卧式加工中心Machining centers,horizontal & vertical 卧式及立式加工中心Machining centers,vertical 立式加工中心Machining centers,vertical double-column type 立式双柱加工中心Magnetic tools 磁性工具Manifolds 集合管Milling heads 铣头Milling machines 铣床Milling m a c h i n e s , b e d t y p e 奮珟 _ 銛奮 / p >。
质量师常用英语--五金零件类
inner guiding post内导柱inner hexagon screw内六⾓螺钉dowel pin固定销coil spring弹簧lifter pin顶料销eq-height sleeves=spool等⾼套筒pin销lifter guide pin浮升导料销guide pin导正销wire spring圆线弹簧outer guiding post外导柱stop screw⽌付螺丝located pin定位销outer bush外导套模板类top plate上托板（顶板）top block上垫脚punch set上模座punch pad上垫板punch holder上夹板stripper pad脱料背板up stripper上脱料板male die公模(凸模)feature die公母模female die母模(凹模)upper plate上模板lower plate下模板die pad下垫板die holder下夹板die set下模座bottom block下垫脚bottom plate下托板(底板) stripping plate内外打(脱料板) outer stripper外脱料板inner stripper内脱料板lower stripper下脱料板零件类punch冲头insert⼊块(嵌⼊件)deburring punch压⽑边冲⼦groove punch压线冲⼦stamped punch字模冲⼦round punch圆冲⼦special shape punch异形冲⼦bending block折⼑roller滚轴baffle plate挡块located block定位块supporting block for location定位⽀承块air cushion plate⽓垫板air-cushion eject-rod⽓垫顶杆trimming punch切边冲⼦stiffening rib punch = stinger 加强筋冲⼦ribbon punch压筋冲⼦reel-stretch punch卷圆压平冲⼦guide plate定位板sliding block滑块sliding dowel block滑块固定块active plate活动板lower sliding plate下滑块板upper holder block上压块upper mid plate上中间板spring box弹簧箱spring-box eject-rod弹簧箱顶杆spring-box eject-plate弹簧箱顶板bushing bolck衬套cover plate盖板guide pad导料块塑件&模具相关英⽂compre sion molding压缩成型flash mold溢流式模具plsitive mold挤压式模具split mold分割式模具cavity型控母模core模⼼公模taper锥拔leather cloak仿⽪⾰shiver饰纹flow mark流痕welding mark溶合痕post screw insert螺纹套筒埋值self tapping screw⾃攻螺丝striper plate脱料板piston活塞cylinder汽缸套chip细碎物handle mold⼿持式模具。
螺母相关的中英文词汇
螺母:nut螺母机:nut machine冷冲螺母:cold punched nut压紧螺母:compression nut槽顶螺母:crown nut差动螺母:differential nut圆盖螺母:dome nut偏心螺母:eccentric nut平面螺母:face nut压紧螺母:gland nut手轮螺母:hand wheel nut六角螺母:hexagon nut六角螺母:hexagonal nut左旋螺母:left-handed nut夹紧螺母:locked nut纵裂螺母:longitudinal split nut 纵裂螺母:longitudinally split nut 蝶形螺母:butterfly nut拧螺母机:nut driving machine 螺母车床:nut lathe锁紧螺母:cap nut螺母心轴:nut mandrel螺母冲孔:nut piercing螺母扳手:nut spanner螺母扳手:nut wrench填密螺母:packing nut罗基螺母:Rudge nuts后轴螺母:rear axle nut自锁螺母:self-locking nut开缝螺母:slotted nut星形螺母:star wheel推力螺母:thrust nut紧固螺母:tight nut拉紧螺母:tightening nut肘节螺母:toggle nut带孔螺母:tommy bar nutU型螺母:U-nut双端螺母:union nut车轮螺母:wheel nut钉字形螺母:T-nut左旋纹螺母:left-hand nut螺母锻造机:nut forging machine 螺母镦压机:nut former螺母压力机:nut press左右纹螺母:right and left nut杠杆轴螺母:lever shaft nut螺母螺丝攻:nut tap螺母攻丝机:nut tapping machine填密函盖螺母:packing gland nut螺母锁紧垫圈:nut lock washer填密螺母扳手:packing nut wrench气门锁紧螺母:keeper拉杆反向螺母:reach rod reverse nut弯柄螺母丝锥:bent shank tapper tap气门锁紧螺母:valve lock系杆球头螺母:tie-rod-ball stud六杆机构，螺母:screw nut杆托螺栓和螺母:lever bracket bolt and nut横联杆球头螺母:tie-rod-ball nut蜗杆螺母式转向器:nut and lever steering蜗杆螺母式转向器:screw and nut steering螺母端面加工车床:nut facing lathe蜗杆螺母式转向器:worm and nut steering蝶形螺母，翼形螺母:thumb nut自锁螺母，防松螺母:locknut锁紧螺母，防松螺母:lock nut防松螺母，锁紧螺母:blocking nut机用螺丝攻，螺母丝锥:leading tap叉形螺母扳手，端面扳手:face spanner快动螺母扳手，自动螺母扳手:nut spinner后螺母，限动螺母，支撑螺母:back nut对开螺母，开合螺母，开缝螺母:half nut锁紧螺母，防松螺母，防转螺母:locking nut①离合器从动盘②快速拆装车轮螺母:spinner保险螺母，防松螺母，锁紧螺母，安全螺母，锁定螺母:jam nut。
螺丝英文简称
No. 英文单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread PT 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标螺丝相关参数英语对照A: Machine Screw: 机械螺丝B: Tapping Screw: 自攻螺丝(分使用于金属与使用于塑料二种) B-1: Sheet Metal Tapping Screw. (铁板牙自攻螺丝)B-2: Plastic Tapping Screw. ( 塑料用, 自攻螺丝)C: Wooden Screw : 木工螺丝D: Drywall Screw : 水泥墙螺丝常见螺丝材质:a.Low Carbon Steel :低碳钢b. SS-304 : Stainless Steel 304c. SS-302: Stainless Steel 302 :结构韧性较好d. Aluminum 5052 :铝合金5052d. Brass: 黄铜e. Bronze: 青铜f. UNS C11000 Copper: 锑铜Finish Code: 外观处理规格Head Code: 头部外型螺丝型号Drive Code: 头部剖沟,特征型号Length Code: 螺丝长度(mm)A-1: Thread Code: 螺丝型号A-2: Length Code: 螺丝长度:A-3: Drive Code/ 头部剖沟,特征.a. Slotted: 一字( Minus )b. Phillips: 十字( Plus )c. Phil-Slot: 一字/十字d. Hex Scoket: 内六角e. One Way: 单向(只可锁入,不可退出)A-4: Head Code/ 头部外型.a. Flat: 平头(锁入后,顶部与工作件齐平)b. Oval: 色拉头c. Round: 圆头d. Pan: 圆扁头e. Truss: 大圆扁头f. Hex : 六角头A-5: Finish Code/ 外观处理.a. Z: Zine-Plated: 镀锌b. Ni: Ni-Plated: 镀镍c. Tin-Plated: 镀锡d. Zine Plated / Green Iridite: 镀锌绿膜处理.e. Radiant Plated: 镀五彩f. Passivate: 抗氧化处理.g. Alodial Finish: 无外观处理螺纹大径：Major Diam螺纹中径：Pitch diam螺纹底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punchingDiameter 直径Length 长度各类紧固件标准件产品英语翻译对照插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors) 强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts 焊接螺帽Weld Nuts。
五金 英语
五金英语五金（Hardware）是指各种金属制品的统称，广义上包括金属和合金制品，狭义上主要指金属材料加工的产品。
五金制品在日常生活中无处不在，涵盖了工具、家居用品、建筑材料等多个领域。
随着经济的发展和人们生活水平的提高，五金制品市场需求也在逐渐增加，这就要求我们掌握一定的五金英语知识，以便与国际合作伙伴进行交流和合作。
本文将为大家介绍一些五金英语的基本词汇和常用句型。
五金英语词汇表1.Hardware - 五金2.Metal - 金属3.Alloy - 合金4.Tool - 工具5.Screw - 螺丝钉6.Bolt - 螺栓7.Nut - 螺帽8.Washer - 垫圈9.Hinge - 铰链10.Screwdriver - 螺丝刀11.Hammer - 锤子12.Drill - 钻孔机13.Pliers - 钳子14.Wrench - 扳手15.Tape measure - 卷尺16.Level - 水平仪17.Nails - 钉子18.Staples - U型钉19.Cabinet - 橱柜tch - 铰链锁常用五金英语句型1.How much is this hammer? - 这个锤子多少钱？2.Do you have different sizes of screws? - 你们有不同尺寸的螺丝吗？3.Can I get a discount if I buy in bulk? - 如果我批量购买，能给我打折吗？4.Where can I find the washers? - 我在哪里可以找到垫圈？5.Could you recommend a good drill for home use? - 你能推荐一款适合家用的好钻孔机吗？6.Does this hinge come with screws? - 这个铰链附带螺丝吗？7.I need a wrench to fix my bicycle. - 我需要一个扳手来修我的自行车。
常用紧固件英语汇总
常用紧固件英语汇总螺纹大径：Major Diam中径：Pitch diam底径：Minor diam通止规：Go/No go gage机械性能：mechanical and physical propertiesunified thread 统一英制螺纹Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆Case carburization 表面渗碳With across flats 对边With across corners 对角Radius of fillet:头下圆角Transition thread length 过度螺纹Wrenching height 扳拧高度Rockwell 铬氏硬度Vickers 维氏硬度Brinell 布氏硬度Metallography microscope 金相显微镜Salt spray device 盐雾试验箱Tensile testing machine 拉力试验机Cold forming 冷打Hot forging 红镦P C 8 = property class 8 机械性能8级原材料：Raw material球化退火：Annealing冷拔：Drawing冷镦：Forming机加工：Machining螺纹成型：Roll Threading热处理：heat-treatment表面处理：finish去氢：Lustrating hydrogen检验：Inspection包装：Packing入库：Stocking车床：lathe磨制：grinding红打：hot forging冲压：punching1 标准GB （国标）DIN （德制）JIS （日标）ANSI （美标）BA （英制）2 螺纹M. MF (公制牙)UNC.UNF (美制牙)BSW.BSF (英制牙)3 海关编码73181500 螺栓73181600 螺帽73182100 垫圈6-bobes recess 内梅花BO=black oxide 氧化发黑IHH=ind hex head 锯六角头PH=phillips 十字槽sw/fw=split washer/flatwasher 弹垫平垫kep nut 锁紧螺母cementation 渗碳acorn nut 盖形螺母螺丝头型Pan 圆头(盘头)Oval 半沉头H.W.H.. 六角小法兰H.W.F. 六角大法兰CSK 沙拉头(沉头)Large wafer 大扁平头Bugle 喇叭头Truss 盘头带垫Pozi 米制槽Phill 十字槽Serra-tion 垫下带花Flower Head 开花头欧洲标准EN国际标准化组织国际标准化组织标准ISO 国际电工委员会国际电工委员会标准IEC 国际国际电信联盟标准ITU欧共体欧洲电子元器件协会标准CECC 德国德国标准DIN英国英国标准BS美国美国国家标准ANSI美国美国材料与试验协会标准ASTM美国美国机械工程师协会标准ASME美国美国电子工业协会标准EIA美国美国连接电子学工业协会标准IPC美国美国焊接协会标准AWS美国美国石油协会标准API美国美国国家公路与运输商协会标准AASHTO美国美国加热制冷与空调工程师协会标准ASHRAE 美国美国电气制造商协会标准NEMA美国美国给水工程协会标准AWWA美国美国仪器、系统与自动化协会标准ISA美国美国保险商实验室标准UL美国电气与电子工程师协会标准IEEE美国美国机动工程师协会标准SAE美国美国腐蚀工程师协会标准NACE美国美国纺织化学师与印染师协会标准AATCC美国美国钢结构油漆标准SSPC美国美国铝协会标准AA美国美国卫生工程协会标准ASSE美国美国煤气协会标准AGA美国美国阀门及配件工业协会标准MSS美国美国音频工程协会标准AES美国美国建筑小五金制造商协会标准BHMA美国美国国家卫生基金会标准NSF美国美国标准NISO,PFI,RWMA美国美国信息与图像管理协会标准AIIM美国美国空调与制冷学会标准ARI美国美国军用标准MIL美国美国防火协会标准NFPA美国美国航空无线电设备标准ARINC美国美国齿轮协会标准AGMA加拿大加拿大标准协会标准CSA加拿大加拿大通用标准局标准CGSB澳大利亚澳大利亚国家标准AS德国德国工程师协会标准VDI欧共体欧洲电信标准ETSI法国法国标准NF日本日本工业标准JIS。
螺丝英文
常用英文单词及简写形式No. 单词简写中文1 screw scr 螺丝2 nut nut 螺母3 washer wash 垫圈4 head hd 头5 thread thre 螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread P T 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标47 ISO / 国际标准48 NFE / 法标49 GB / 国家标准50 Quality / 质量51 surface hardness 表面硬度52 product treatment 表面处理53 plating 电镀54 heat 热55 Screws And Shafts For Motorcycle Or Bicycle 机(踏)车用螺丝、轴心56 Screws And Shafts For Sewing Maching 针车用螺丝、轴心57 Socket Set Screws 止付螺丝58 Stainless Steel Coarse Thread Screws 不锈钢宽牙螺丝59 Stainless Steel High-Low Thread Screws 不锈钢高低牙螺丝60 Stainless Steel Machine Screws 不锈钢机械螺丝61 Stainless Steel Self Drilling Screws 不锈钢钻尾螺丝62 Stainless Steel Self Tapping Screws 不锈钢螺丝class=a1>自攻螺丝63 Stainless Steel Thread Cutting Screws 不锈钢自削螺丝64 Stainless Steel Tri-Lobular Thread Screws 不锈钢三角牙螺丝65 Steel Ceiling Anchors 插片壁虎66 Drop in Anchors 内迫壁虎67 Steel Hit Anchors 碳钢锤钉壁虎68 Steel Hex Coupling Nuts 碳钢六角螺帽69 Wedge Anchors 强力车修壁虎70 Cut Anchors 外迫壁虎71 Chemical Anchors 化学壁虎72 Heavy Duty Expansion Anchors 不锈钢重载胀栓73 Tie Wire Anchors 鱼眼壁虎企眼长螺帽74 Hammer Drive Anchors 锌合金打入式壁虎75 Strut Nuts 弹簧螺帽76 Toggle Bolts (Spring Toggle & Gravity Toggle) 兰花夹系列77 Nylon Frame Anchors or Metalframe Anchors 门窗、地板专用壁虎78 Hollow Wall Anchors 石膏板中空壁虎79 Sleeve Anchors 套管式壁虎80 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors) 打入式壁虎鱼形尼龙壁虎81 Hit Anchors 强力式锤钉壁虎82 Bolt Anchors 电梯壁虎83 Heavy duty anchors 重载壁虎84 Loxin Masonry Anchors 两片夹85 Set Bolts 定位螺栓86 Short Strap Anchors 长型兰花夹87 Drop in Setting Tools 工具棒88 Elephant foot anchors 象脚壁虎89 Concrete Insert 水泥预埋件90 Drop in Anchor with Lip 翻边胀轴91 Legs Drywall Anchors 冲件92 Hex Cap Nuts 六角盖头螺帽93 Hex Serrated Nuts 六角锯齿螺帽94 Hex Flange Nuts 六角轮缘螺帽95 Hex Coupling Nuts(High Nuts) 高脚螺帽96 Round Nuts 圆螺帽97 Square Nuts 四角螺帽98 Pipe Nuts 管用螺帽99 Wheel Nuts 轮壳螺帽100 Wing Nuts 蝶型螺帽101 U Nuts U形螺帽102 T Nuts T形螺帽103 Eye Nuts 环首螺帽104 Kep Nuts 齿形螺帽105 Clinch Nuts 齿花螺帽106 Corten Steel Heavy Hex Nuts 耐候钢六角重型螺帽107 Weld Nuts 焊接螺帽108 Heigh Strength Nuts 高张力螺帽109 Structural Nuts 建业用螺帽110 Stainless Steel Nuts 不锈钢螺帽111 Brass Nuts 铜螺帽112 Aluminum Nuts 铝螺帽113 Alloy Steel Nuts 合金钢螺帽114 Heavy Duty Wheel Hub Nuts 重型车螺帽115 Acorn Cap Nuts 铁器焊接袋帽116 All-Metal Prevailing Torque Type Nuts 金属预置扭矩式螺帽117 Anchor Nuts 壁虎螺帽118 Big Size Nuts 大尺寸螺帽119 Closed End Acorn Nuts 铁盖袋帽120 Conical Washer Nuts 盘形华司螺帽121 Din 986 Domed Cap Nuts 铁盖+尼龙圈组合盖帽122 Flange Nylon Insert Lock Nuts 突缘尼龙盖帽123 Flat Waser Nuts 平面华司螺帽124 Hex Slotted Nut 六角割沟螺帽125 Self-Locking Nuts 自锁螺帽126 Sliding Nuts 制止螺帽127 Sln Self-Locking Nuts Sln-自动防松螺帽128 Special Nuts 其它特殊螺帽129 Spring Nuts 弹簧螺帽130 Stainless Steel Flange Nuts 不锈钢突缘螺帽131 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角轮缘尼龙螺帽132 Stainless Steel Heavy Hex Nuts 不锈钢六角重型螺帽133 Stainless Steel Hex Nuts 不锈钢六角螺帽134 Stainless Steel Nylon Insert Lock Nuts 不锈钢尼龙嵌入螺帽135 Hex Nuts 普通六角螺帽136 Heavy Hex Nuts 六角重型螺帽137 Hex Jam Nuts 薄型螺帽138 Nylon Insert Lock Nuts 尼龙嵌入防松螺帽139 Hex Machine Screw Nut 机械螺丝用六角螺帽140 Hex Head Cap Screws(Hex Bolts) 六角螺丝(栓)141 Hex Head Machine Bolts 六角机械螺丝142 Hex Lag Bolts 六角木牙螺丝143 Square Head Bolts 四角螺丝144 Carriage Bolts 马车各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine 螺丝制造搓牙机械Automatic Thread Rolling Machine 螺丝割尾加工机械Automatic Thread Slotting Machine 螺丝制造成型机械Automatic Trimming Machine 拉钉打头机Blind Rivet Heading Machine 螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers 螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment 螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces 球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace 超防锈复合瓷膜Ceramic Coating 连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace 连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace 螺丝割尾及特殊割遘加工Machine Screw Shank Slotting 螺丝钻孔加工Screw Shank Drilling 鸡眼上下模Eyelets Dies 一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace 倒立式滑落型伸线机Handstand Type Wire Drawing Machine 十字冲模Header Punches In Various Drives 成型冲模Header Punches In Various Drives 螺丝打头机Heading Machine 螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine 高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine 热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts 机械镀锌Mechanical Galvanized 迷你成型机Mini-Formers 成品自动收线机Non-Stop Coiler 精抽自动收线机Non-Stop Coiler(Skinpass) 螺帽模Nut Forming Dies 螺帽成型模Nuts Formers 特殊零件成型机Parts Forming Maching 冲模Punch Dies 冲子Punch Pins 罗拉成型机Rollers Formers 机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers 套高成型机Sockets Formers 一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace 攻牙机Tapping Machine 螺丝攻、车刀、模具Taps Dies And Tools 搓牙机铁屑分离装置Thread Chip Separator 滚牙轮Thread Rolling Dies 牙板Thread Rolling Dies Plates 精密油压滚牙机Hydraulic Thread Rolling Machines 模具Tools 六角整头模Trimming Dies Hexagan 碳化钨模具Tungsten Carbide Die 镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd 电镀化学原料Various Electroplating Chemicals 环规校正Calibration For Ring Gage 环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage 螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments 螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers 螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware 德国schatz扭力机代理Representative Of Schatz Torque Machin Iso 品质保证系统Iso Quality Assurance System 生产管理系统Production Control System 物料管理系统Material Control System 齿轮Gears 不锈钢牙条棒Stainless Steel Hread Rod 马达轴承轴心组件Bearing Shaft(Motor) 轴承轴心Bearing Shaft 开口铆钉Blind Rivets 长形拉帽Blind Rivet Nuts 拉帽Blind Nuts 拉钉Blind Rivets 实心梢Clevis Pins And Straight Pins 弹片Clips 卷钉Coil Nails 冷锻零件Cold Forming Part 开口销Cotter Pins E型环E-Rings 膨胀螺栓Expansion Anchor Bolts 鸡眼钉Eyelets Rivets R型销Snap Pins 闸、锁Latches And Keeper Assembleds 其它特殊铆钉Other Specil Rivets 销Pins 格式管夹、管束Pipe Hanger 铆钉Rivets 螺旋锔及螺旋圈Screw Hook And Screw Rings 中空钉Semi-Tubular Rivet 开叉钉Split Drive Anchors 弹簧华司Spring Washers 弹簧蝴蝶夹Spring Wings 不锈钢华司Stainlesssteel Washers 钢铁钉Steel And Iron Nails 搓牙铁钉Thread Nails 钛合金铆钉Titaium Alloy Rivets 管形铆钉Tubular Rivets 华司Washers 真空热处理Vacuum Heat Treatment 螺丝、螺帽、五金、Diy扣件Fasteners 合金钢工具Alloy Steel Tools 螺栓模Bolt Heading Dies 手动拉钉钳Hand Riveter 船舶链Anchor Chain 脚踏车链锁Bicycle Chain Locks 螺丝起子Bit 罗拉Chain Roller 特殊铆合扣件Collars(A Blindfastener For Huck Intl) 装饰链Decorative Chains 自攻螺纹衬套Ensat Threaded Inserts 六角扳手Hexagon Keys 超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings 汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs 螺纹护套Recoil Inserts 链条用滚子Roller For Roller Chain 金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners 工具套筒组件Socket Wrench Sets 不锈钢链Stainless Steel Chains 轭子T-Yoke 轮胎链Tire Chains 狗链Dog Chains 喇叭头轭铁U-Yoke,T-Yoke For Speaker 不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter 工业用链Industrial Steel Link Chains 拖链安全链Tow Chains And Safety Chains 机车离合器零件Manufacture Of Motorcycle's Cvt Parts 牙条棒Thread Rod紧固件专用词中英文对照螺丝(screw)英文英文简写中文示意图头部形状(Head style)Pan Head Pan HD 盘头Flat Head Flat HD 平头或countersunk Head CS HD 沉头Round Head RD HD 圆头Oval Head OL HD 半沉头Pan washer Head Pan wash HD 垫圈盘头Socket Hd Skt HD 六角圆柱头Hexagon cap Head Hex Cap HD 外六角头Square shouder Head SQ SDR HD 方肩头Cheese Head Ches HD 圆锥头Wing Head Wing HD 带翼头穴型状(Driver style)Philips cross recessed Phil 十字Pozidriv cross recessed Pozi 米字Torx Torx内梅花6-lobular 6-lobuSocket Skt 内六角Slot Slt 一字槽表面处理(coating) Znic blue ZB 兰锌Zinc black ZBK 黑锌Zinc yellow(Zinc oliver) ZY (ZO) 黄锌Zinc white ZW 白锌Silver Plating Sil Plat 镀银Nickel Plating Nic Plat 镀镍Dacromet Dacr 达克罗Heat dip zinc HDZinc 热浸锌1 screw scr螺丝2 nut nut螺母3 washer wash垫圈4 head hd 头5 thread thre螺纹6 coating coat 镀层7 rivet riv 铆钉8 standoff stdoff 内外六角钉9 driver driv 穴10 hexagon hexa 六角11 tooth tooth 齿12 lock lck 锁13 spring spr 弹簧14 wave wave 波浪型15 pitch pitch 牙距16 partial thread P T 半螺纹17 PT PT 一种螺纹形式18 Full Thread FT 全螺纹19 silver silv 银20 cone cone 锥形21 Eco-syn Eco 30度牙的一种螺纹22 Thread Forming TF 自攻螺纹23 Self Tapping self tapp 自切屑螺纹24 pin pin 销25 shaft Shaf 轴26 steel St 铁27 stainless steel SS 不锈钢28 Brass(Cu) Bras(Cu) 铜29 Aluminum AL 铝30 Rubber Rub 橡胶31 machine screw mech scr 机制螺丝32 SEM screw SEM Scr 组合螺丝33 Material material 材料34 Grade GD 等级35 Finish Finish 表面处理36 Point Point 点37 Clamp Clam 夹子38 internal Int 内39 external ext 外40 thickness / 厚度41 length / 长度42 hole / 孔43 Metric Metcric 公制44 DIN / 德标45 ANSI / 美标46 JIS / 日标47 ISO / 国际标准48 NFE / 法标49 GB / 国家标准50 Quality / 质量51 surface hardness 表面硬度52 product treatment 表面处理53 plating 电镀54 heat 热55 Screws And Shafts For Motorcycle Or Bicycle 机(踏)车用螺丝、轴心56 Screws And Shafts For Sewing Maching 针车用螺丝、轴心57 Socket Set Screws 止付螺丝58 Stainless Steel Coarse Thread Screws 不锈钢宽牙螺丝59 Stainless Steel High-Low Thread Screws 不锈钢高低牙螺丝60 Stainless Steel Machine Screws 不锈钢机械螺丝61 Stainless Steel Self Drilling Screws 不锈钢钻尾螺丝62 Stainless Steel Self Tapping Screws 不锈钢自攻螺丝63 Stainless Steel Thread Cutting Screws 不锈钢自削螺丝64 Stainless Steel Tri-Lobular Thread Screws 不锈钢三角牙螺丝65 Steel Ceiling Anchors 插片壁虎66 Drop in Anchors 内迫壁虎67 Steel Hit Anchors 碳钢锤钉壁虎68 Steel Hex Coupling Nuts 碳钢六角螺帽69 Wedge Anchors 强力车修壁虎70 Cut Anchors 外迫壁虎71 Chemical Anchors 化学壁虎72 Heavy Duty Expansion Anchors 不锈钢重载胀栓73 Tie Wire Anchors 鱼眼壁虎企眼长螺帽74 Hammer Drive Anchors 锌合金打入式壁虎75 Strut Nuts 弹簧螺帽76 Toggle Bolts (Spring Toggle & Gravity Toggle) 兰花夹系列77 Nylon Frame Anchors or Metalframe Anchors 门窗、地板专用壁虎78 Hollow Wall Anchors 石膏板中空壁虎79 Sleeve Anchors 套管式壁虎80 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors) 打入式壁虎鱼形尼龙壁虎81 Hit Anchors 强力式锤钉壁虎82 Bolt Anchors 电梯壁虎83 Heavy duty anchors 重载壁虎84 Loxin Masonry Anchors 两片夹85 Set Bolts 定位螺栓86 Short Strap Anchors 长型兰花夹87 Drop in Setting Tools 工具棒88 Elephant foot anchors 象脚壁虎89 Concrete Insert 水泥预埋件90 Drop in Anchor with Lip 翻边胀轴91 Legs Drywall Anchors 冲件92 Hex Cap Nuts 六角盖头螺帽93 Hex Serrated Nuts 六角锯齿螺帽94 Hex Flange Nuts 六角轮缘螺帽95 Hex Coupling Nuts(High Nuts) 高脚螺帽96 Round Nuts 圆螺帽97 Square Nuts 四角螺帽98 Pipe Nuts 管用螺帽99 Wheel Nuts 轮壳螺帽100 Wing Nuts 蝶型螺帽101 U Nuts U形螺帽102 T Nuts T形螺帽103 Eye Nuts 环首螺帽104 Kep Nuts 齿形螺帽105 Clinch Nuts 齿花螺帽106 Corten Steel Heavy Hex Nuts 耐候钢六角重型螺帽107 Weld Nuts 焊接螺帽108 Heigh Strength Nuts 高张力螺帽109 Structural Nuts 建业用螺帽110 Stainless Steel Nuts 不锈钢螺帽111 Brass Nuts 铜螺帽112 Aluminum Nuts 铝螺帽113 Alloy Steel Nuts 合金钢螺帽114 Heavy Duty Wheel Hub Nuts 重型车螺帽115 Acorn Cap Nuts 铁器焊接袋帽116 All-Metal Prevailing Torque Type Nuts 金属预置扭矩式螺帽117 Anchor Nuts 壁虎螺帽118 Big Size Nuts 大尺寸螺帽119 Closed End Acorn Nuts 铁盖袋帽120 Conical Washer Nuts 盘形华司螺帽121 Din 986 Domed Cap Nuts 铁盖+尼龙圈组合盖帽122 Flange Nylon Insert Lock Nuts 突缘尼龙盖帽123 Flat Waser Nuts 平面华司螺帽124 Hex Slotted Nut 六角割沟螺帽125 Self-Locking Nuts 自锁螺帽126 Sliding Nuts 制止螺帽127 Sln Self-Locking Nuts Sln-自动防松螺帽128 Special Nuts 其它特殊螺帽129 Spring Nuts 弹簧螺帽130 Stainless Steel Flange Nuts 不锈钢突缘螺帽131 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角轮缘尼龙螺帽132 Stainless Steel Heavy Hex Nuts 不锈钢六角重型螺帽133 Stainless Steel Hex Nuts 不锈钢六角螺帽134 Stainless Steel Nylon Insert Lock Nuts 不锈钢尼龙嵌入螺帽135 Hex Nuts 普通六角螺帽136 Heavy Hex Nuts 六角重型螺帽137 Hex Jam Nuts 薄型螺帽138 Nylon Insert Lock Nuts 尼龙嵌入防松螺帽139 Hex Machine Screw Nut 机械螺丝用六角螺帽140 Hex Head Cap Screws(Hex Bolts) 六角螺丝(栓)141 Hex Head Machine Bolts 六角机械螺丝142 Hex Lag Bolts 六角木牙螺丝143 Square Head Bolts 四角螺丝144 Carriage Bolts 马车螺丝145 Eye Bolts 环首螺丝146 Hex Socket Cap Screws 内六角孔螺丝147 Set Screws 固定螺丝148 Stud Bolts 螺椿栓149 Screw Studs 螺旋椿150 Wheel Bolts 轮壳螺栓151 Wing Screws 翼形螺丝152 Self Tapping Screws 自攻螺丝153 Thread Cutting Screws 自削螺丝154 Self Drilling Screws 钻尾螺丝155 Drive Screws 旋入螺丝156 Machine Screws 机械螺丝157 Wood Screws 木螺丝158 Furniture Screws 家具螺丝159 Chipboard Screws 塑板螺丝160 Drywall Screws 墙用螺丝161 Foundation Bolts 基础螺栓162 U Bolts U型螺栓163 Hook Bolts 勾头螺栓164 Toggle Bolts 套挂螺丝165 Flange Bolts 突缘螺丝166 Track Bolts 轨道螺栓(鱼尾螺丝)167 Corten Steel Heavy Hex Bolts 耐候钢螺丝168 T.C.Bolts 扭矩控制螺栓169 High Strength Bolts 高张力螺栓170 Welding Studs 剪力钉(焊接螺丝)171 Screws And Washers Assembled(Sems) 螺丝附华司组合172 Big Size Bolts 大尺寸螺栓173 Stainless Steel Sheet Metal Screws 不锈钢小螺丝174 Stainless Steel Bolts 不锈钢大螺丝175 Brass Screws 铜螺丝176 Aluminum Screws 铝螺丝177 Alloy Steel Screws 合金钢螺丝178 Electronic Screws 电子螺丝179 Micro Screws 微小精密螺丝180 Plastic Screws 塑料螺丝181 Particle Board Screws 复合材料用螺丝182 Titanium Alloy Bolts 钛合金螺丝183 Ti,Zr,Mo,Nb Pare Metal Bolts Parts 钛、锆、钼、铌等螺丝、零件、材料184 Thumb Screws 拇指螺丝185 Double End Screws Hanger Bolt 双头牙螺丝186 Automotive Fasteners 车辆(汽车)螺丝、螺帽187 Aerospace Fasteners 航天用螺丝188 Source Control Bolts 飞机特殊扣件189 Blind Bolts 拉栓190 Panel Fasteners 面板螺丝191 Elevator Bolts 电梯螺丝192 Square Set Screws 四角头固定螺丝193 T Head Bolts T头螺丝194 Step Bolts 大头马车螺丝195 One Way Lag Screws 单向螺丝196 Hose Clamp Screws 管夹螺丝197 Stainless Steel Hex Socket Cap Screws 不锈钢固定螺丝198 Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝199 Hinge Screws 铰链螺丝200 Container Screws 货柜螺丝201 Bi-Metal Self Drilling Screws 复合材料钻尾螺丝202 Trilobular Thread Screws 三角牙螺丝203 High Low Screws 高低牙螺丝204 Particle Board Screws 夹板用螺丝205 Toilet Closet Bolts 马桶螺丝206 Special Longer Screws 特长螺丝207 Building Fasteners 建业螺丝208 Stainless Steel Hex Socket Cap Screws 不锈钢六角螺丝209 Special Screws Or Bolts 其它特殊螺丝210 Special Stainless Steel Screws 不锈钢特殊螺丝211 Collated Screws 链带螺丝212 Coarse Thread Screws 宽牙螺丝（粗牙螺丝）213 Concrete Screws 水泥螺丝214 Construction Bolts 板模螺丝215 Die Cast Wing Screws; Zinc Alloy 锌蝶螺丝216 Heavy Duty Wheel Hub Bolts 重型车螺丝217 Hex Socket Set Screws 内六角固定螺丝218 Particle Board Screws 复合材料用螺丝（夹板用）219 Plow Bolts 犁壁螺丝220 Stainless Steel Wood Screws 不锈钢木螺丝221 Toggle Bolts 套挂螺栓及螺丝222 Titanium Alloy Expansion Bolts 钛合金膨胀螺丝223 Hex Cap Nuts 六角盖头螺帽224 Hex Serrated Nuts 六角锯齿螺帽225 Hex Flange Nuts 六角轮缘螺帽226 Hex Coupling Nuts(High Nuts) 高脚螺帽227 Round Nuts 圆螺帽228 Square Nuts 四角螺帽229 Pipe Nuts 管用螺帽230 Wheel Nuts 轮壳螺帽231 Wing Nuts 蝶型螺帽232 U Nuts U形螺帽233 T Nuts T形螺帽234 Eye Nuts 环首螺帽235 Kep Nuts 齿形螺帽236 Clinch Nuts 齿花螺帽237 Corten Steel Heavy Hex Nuts 耐候钢六角重型螺帽238 Weld Nuts 焊接螺帽239 Heigh Strength Nuts 高张力螺帽240 Structural Nuts 建业用螺帽241 Stainless Steel Nuts 不锈钢螺帽242 Brass Nuts 铜螺帽243 Aluminum Nuts 铝螺帽244 Alloy Steel Nuts 合金钢螺帽245 Heavy Duty Wheel Hub Nuts 重型车螺帽246 Acorn Cap Nuts 铁器焊接袋帽247 All-Metal Prevailing Torque Type Nuts 金属预置扭矩式螺帽248 Anchor Nuts 壁虎螺帽249 Big Size Nuts 大尺寸螺帽250 Closed End Acorn Nuts 铁盖袋帽251 Conical Washer Nuts 盘形华司螺帽252 Din 986 Domed Cap Nuts 铁盖+尼龙圈组合盖帽253 Flange Nylon Insert Lock Nuts 突缘尼龙盖帽254 Flat Waser Nuts 平面华司螺帽255 Hex Slotted Nut 六角割沟螺帽256 Self-Locking Nuts 自锁螺帽257 Sliding Nuts 制止螺帽258 Sln Self-Locking Nuts Sln-自动防松螺帽259 Special Nuts 其它特殊螺帽260 Spring Nuts 弹簧螺帽261 Stainless Steel Flange Nuts 不锈钢突缘螺帽262 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角轮缘尼龙螺帽263 Stainless Steel Heavy Hex Nuts 不锈钢六角重型螺帽264 Stainless Steel Hex Nuts 不锈钢六角螺帽265 Stainless Steel Nylon Insert Lock Nuts 不锈钢尼龙嵌入螺帽266 Zinc Die Casting Nuts 锌压属螺帽267 Hex Nuts 普通六角螺帽268 Heavy Hex Nuts 六角重型螺帽269 Nylon Insert Lock Nuts 尼龙嵌入防松螺帽270 Hex Jam Nuts 薄型螺帽271 Hex Machine Screw Nut 机械螺丝用六角螺帽272 Alloy Steel Wire Rod 合金钢线材盘元273 Annealing Wire And Rod 球状化线材274 Black Wire 黑铁丝275 Brass Wire And Rod 黄铜棒线276 Bright Steel Bar(Hex/Round/Square) 磨光棒钢277 Copper Alloy Wire 铜合金线278 E.D.M Cutting Wire 线切割线279 Free Cutting Steel Wire Rod 快削钢线材盘元280 Iron Or Steel Wire 线材281 Iron Or Steel Wire Rod 线材盘元282 Nickel Silver Wire 洋白铜线283 Phosphate Bronze Wire 磷青铜线284 Stainless Steel Bar(Round/Hex/Square) 不锈钢条棒285 Stainless Steel Cold Heading Wire 不锈钢冷锻线材286 Stainless Steel Draw Wire 不锈钢线(抽线后)287 Stainless Steel Wire 不锈钢线材288 Stainless Steel Wire And Rod 不锈钢线材及盘元289 Steel Bar(Hex/Round/Square) 棒钢290 evolving Wire Twisting Machine 转回90度碾线头机 90讧291 Air Riveter 气动拉钉机。
螺丝英文对照
六角蓋頭帽：HEXCAPNUTS六角鋸齒螺帽：HEXSERRATEDNUTS六角輪緣螺帽：HEXFLANGENUTS高腳螺帽：HEXCOUPLINGNUTS(HIGHNUTS)圓螺帽：ROUNDNUTS四角螺帽：SQUARENUTS管用螺帽：PIPENUTS輪殼螺帽：WHEELNUTS蝶型螺帽：WINGNUTSU形螺帽：UNUTST形螺帽：TNUTS環首螺帽：EYENUTS齒形螺帽：KEPNUTS齒花螺帽：CLINCHNUTS耐候鋼六角重型螺帽：CORTENSTEELHEAVYHEXNUTS 焊接螺帽：WELDNUTS高張力螺帽：HEIGHSTRENGTHNUTS建業用螺帽：STRUCTURALNUTS不鏽鋼螺帽：STAINLESSSTEELNUTS銅螺帽：BRASSNUTS鋁螺帽：ALUMINUMNUTS合金鋼螺帽：ALLOYSTEELNUTS重型車螺帽：HEAVYDUTYWHEELHUBNUTS鐵器焊接袋帽：ACORNCAPNUTS金屬預置扭矩式螺帽：ALL-METALPREVAILINGTORQUETYPENUTS 壁虎螺帽：ANCHORNUTS大尺寸螺帽：BIGSIZENUTS鐵蓋袋帽：CLOSEDENDACORNNUTS盤形華司螺帽：CONICALWASHERNUTS鐵蓋+尼龍圈組合蓋帽：DIN986DOMEDCAPNUTS突緣尼龍蓋帽：FLANGENYLONINSERTLOCKNUTS平面華司螺帽：FLATWASERNUTS六角割溝螺帽：HEXSLOTTEDNUT六角蓋頭帽：HEXCAPNUTS六角鋸齒螺帽：HEXSERRATEDNUTS六角輪緣螺帽：HEXFLANGENUTS高腳螺帽：HEXCOUPLINGNUTS(HIGHNUTS)圓螺帽：ROUNDNUTS四角螺帽：SQUARENUTS管用螺帽：PIPENUTS輪殼螺帽：WHEELNUTS蝶型螺帽：WINGNUTSU形螺帽：UNUTST形螺帽：TNUTS環首螺帽：EYENUTS齒形螺帽：KEPNUTS齒花螺帽：CLINCHNUTS耐候鋼六角重型螺帽：CORTENSTEELHEAVYHEXNUTS焊接螺帽：WELDNUTS高張力螺帽：HEIGHSTRENGTHNUTS建業用螺帽：STRUCTURALNUTS不鏽鋼螺帽：STAINLESSSTEELNUTS銅螺帽：BRASSNUTS鋁螺帽：ALUMINUMNUTS合金鋼螺帽：ALLOYSTEELNUTS重型車螺帽：HEAVYDUTYWHEELHUBNUTS鐵器焊接袋帽：ACORNCAPNUTS金屬預置扭矩式螺帽：ALL-METALPREVAILINGTORQUETYPENUTS 壁虎螺帽：ANCHORNUTS大尺寸螺帽：BIGSIZENUTS鐵蓋袋帽：CLOSEDENDACORNNUTS盤形華司螺帽：CONICALWASHERNUTS鐵蓋+尼龍圈組合蓋帽：DIN986DOMEDCAPNUTS突緣尼龍蓋帽：FLANGENYLONINSERTLOCKNUTS平面華司螺帽：FLATWASERNUTS六角割溝螺帽：HEXSLOTTEDNUT。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Rim type
带法兰型
Flange
法兰
Concave/upper
凹面的
Convex/lower
凸面的
Thread accuracy
螺纹精度
Spanner
扳手
Diameter
直径
Pitch
螺距
Allowance
余量
Width
宽度
Height
高度
Thickness
厚度
Tightening torque
Loose
松动
Anti-loose
防止松动
Safety
安全性
Level
等级
Safety level
安全等级
Vibration
震动
Impact test
冲击试验
Tighten
紧固
Fasten
紧固，牢固
Fastener
紧固件
Installation
安装
Assembly
组装
Bolt
螺栓
Steel
钢
Stainless steel
不锈钢
Carbon steel
碳钢
Low carbon steel
低碳钢
High carbon steel
高碳钢
Finish
表面处理
Hot Dip Zinc Galv.
镀锌处理
Phosphate coated
磷化处理
Parkerized
磷化处理
Valid
有效的
Taper
锥形
Angle
角，角度
Basic type
螺母常见英文单词汇总
Nut
螺母
Screw
螺杆
Hard
坚固的
Lock
锁紧
Size
尺寸/大小
Dimension
尺寸
Type
型号/类型
Material
材料
Quantity
数量
Weight
重量
Payment
付款
Delivery
运输
Price
价格
Quotation
报价
Order
订购
Class
等级
Carton
箱
拉紧转矩
Stock
库存
GB
国家标准
Standard
标准
Hardness
硬度
Wedge
楔形
Mechanical
机械的
Effect
效果
Load荷载，Biblioteka 荷Flat平的，扁的
Performance
性能
Clean
干净的
Damage
受损
Undamaged
未受损害的
Shaft
轴
Structure
结构
Efficiency
效率
Remove
移动，拆除
Hex nut
六角螺母
Bearing nut
轴承螺母
Strength
力量，强度
Reliable
可靠的
Repeated
重复的
Ability
能力
Push
推动
Pull
拉动