Tecohoo-V720,视频会议摄像机,usb高清720P免驱
HDAVS摄像头用户手册说明书
HDAVS Camera User’s ManualVersion 1.0.1Table of Contents1General Introduction (1)1.1Overview (1)1.2Features (1)2Framework and Dimensions (2)3Installation (6)4Menu (9)4.1HAVR Settings (9)4.1.1Control Coaxial Device (9)4.1.2Set Audio Coax (9)4.2Menu Operation (10)Appendix Maintenance (12)WelcomeThank you for purchasing our HDAVS camera!This user’s manual is designed to be a reference tool for your system.Please read the following safeguard and warnings carefully before you use this series product!Please keep this user’s manual well for future reference!Important Safeguards and WarningsElectrical safety•All installation and operation here should conform to your local electrical safety codes.•The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated DC 12V or AC24V in the IEC60950-1. (Power supply requirement is subject to the device label).•Please install easy-to-use device for power off before installing wiring, which is for emergent power off when necessary.•Please check if the power supply meets the requirements of working voltage of the camera before operating the device (The material and length of the power supply cable will influence terminal voltage value).•Please prevent the line cord from being trampled or pressed, especially the plug, power socket and the junction from the device.Environment•Please don’t aim the device at strong light (such as lighting, sunlight and so on) to focus. •Please transport, use and store the device within the range of allowed humidity and temperature. •Please do not allow water and other liquid falling into the camera in case that the internal components are damaged.•Please keep the sound ventilation in case of heat accumulation.•Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.•Please pack the device with standard factory packaging or material with same quality when transporting the device.•It is recommended to use the device together with lightning protection device to enhance lightning protection effect.•It is recommended to GND the device to enhance device reliability.•It is advised to use qualified video transmission cable to improve video quality. It is recommended to use 75-3 coaxial cable or higher standard.Warning•Please use the standard accessories provided by manufacturer and make sure the device is installed and fixed by professional engineers.•Please prevent the device surface from the radiation of laser beam when using laser beam device. •Please do not provide two or more power supply modes for the device, otherwise it may cause damage to the device.Statement•Please refer to the actual product for more details; the manual is just for reference.•The manual will be regularly upgraded according to the product update; the upgraded content will be added in the manual without prior announcement.•Please contact the customer service for the latest procedure and supplementary documentation. •The company is not liable for any loss caused by the operation which is not followed by the manual. •Please refer to the company’s final explanation if there is any doubt or dispute.1General Introduction1.1OverviewThis series megapixel HD camera conforms to the HDAVS standard. It supports video signal high-speed long distance transmission without any delay. It can be controlled by the HAVR conforming to the HDAVS1.2Features●High-performance CMOS image sensor, megapixel definition.●Support HD video and control signal coaxial transmission.●Support 75-3 coaxial cable transmission without any loss. 720P series transmissiondistance over 800m, 1080P series transmission distance over 500m.●High speed, long distance real-time transmission.●Support HDAVS HD and analog SD output.●Support 3D noise reduction, excellent low illuminance performance.●Support ICR switch to realize monitoring both in daytime and at night.●Support WDR (Some models only supports DWDR).●Support OSD menu to adjust parameters.●Support smart IR function.●Support DC 12V/AC 24V power supply (AC 24V is only supported by some models).●IP67 compliance.●It can be applied to the places with HD image request, such as bank, supermarket,telecom, government, school, airport, factory, hotel and etc.2Framework and DimensionsSee Figure 2-1 for the dimension of model A. The unit is mm.Figure 2-1See Figure 2-2 for the dimension of model B. The unit is mm.Figure 2-2See Figure 2-3 for the dimension of model C. The unit is mm.Figure 2-3See Figure 2-4 for the structure components of model A and B.See Figure 2-5for the structure components of model BFigure 2-5See Figure 2-6 and Figure 2-7 for the structure components of model C.Figure 2-6Refer to Sheet 2-1 for more details about cable port. Cable colorPort name FunctionGreenALARM_NOOn-off alarm output port Orange ALARM_NC On-off alarm output port Red ALARM_IN Alarm signal input port Black ALARM_GNDAlarm signal input GND port -Audio input portExternal audio source input. Note:● It needs to set the camera “Audio Mode” as “ExternalAudio “when using external audio source input. ● External audio source has to be analog audio.- Power input portInput DC12V/AC 24V.- Analog video output port Output analog SD video signal - Video port SDIOutput digital HD video signal-HDAVS video output port Coaxial transmission of video, audio signal, it needs to connect to back-end HAVR to control.Sheet 2-1Note:When using 5-direction button to operate OSD menu, the left and right buttons fail to realize vari-focal and zoom function, then it needs to exit OSD menu and operate it again.Figure 2-8Note:Camera models with dual power use the cable structure shown in Figure 2-8; the power input port supports DC12V/AC24V power supply.Figure 2-9Note:There is only one video port for some cameras, which is shown in Figure 2-9, it outputs HD video signal by default, it needs to enable self-adaptation function in the OSD menu to switch to standard definition video signal.3InstallationImportant●Please install the device in time after it is taken apart, which is to avoid the cameramodule being exposed to damp environment for too long.●Before the installation, please make sure the installation surface should be thickenough to sustain at least 3X weight of the camera.Step 1Take out the installation position map from the accessories bag, stick it on the ceiling or wall according to the cable exit, dig holes on the installation surface according to the installation position map, and see Figure 3-1. Pull out the camera cable through the cable exit on the bracket pedestal, and install camera bracket.Figure 3-1●If it is cement wall, it needs to install expansion bolt first (the installation holes ofexpansion bolt need to be in accordance with bracket), then use self-tapping screws to install bracket.●If it is wooden wall, you can just skip the first step, use self-tapping screws to installbracket directly.Step 2 Adjust the camera monitoring direction●If it is the model c or c (1), then use the L-shaped wrench in the accessories bag to loosenthe adjusting screws, adjust the camera to the specific direction which needs to bemonitored, then use L-shaped wrench to tighten adjusting screws and fix the camera, see Figure 3-2.Figure 3-2●If it is model a or model b, then loosen the M3 X 20 and M3 X 5 screws on the bracketaccording to the direction shown in Figure 3-3, adjust the camera to specific monitoring direction via rotating bracket and camera body, then fix the screws.Figure 3-3Step 3Connect the video output port of device cable to the back-end HAVR device, and connect power port to power supply.Step 4 Adjust camera zoom and focus●If it is the model a, then it needs to adjust lens zoom and focus on the back-end HAVRdevice to make the image clear.If it is the model b, after displaying image on the back-end HAVR device, open the camera lower cover and adjust lens focal length via focus/zoom lever to make image clear, and then tighten the lever. Retighten the camera lower cover and complete camera installation.Note:The installation figures above are for reference only.4Menu4.1 HAVR Settings4.1.1 Control Coaxial DeviceThis HDAVS camera series can adjust OSD menu via coaxial control. After connected the camera to the HDAVS series HAVR, from Main Menu->Setting->System->PTZ, you need to select the channel number for access and set control mode as HDAVS and the protocol asHD-AVS. Click “Save” button to save current setup. See Figure 4-1.Figure 4-14.1.2 Set Audio CoaxFrom “Main Menu > Setting > Camera > Encode > Encode”, you need to set “Audio Format” as “G711a” and the “Audio Source” as “HDAVS”. See Figure 4-2 for more details.Figure 4-24.2 Menu OperationClick the right mouse button and select “PTZ Control”, then you will see the “PTZ Setup” menu,which is as shown in Figure 4-3 and Figure 4-4.Figure 4-3Figure 4-4See Sheet 4-1 for the details of button functions.ButtonFunctionOpen menu 、Select menu item 、 Select menu valueAdjust lens zoom and auto trigger focus Note: Some of the buttons can only be applied for the motorized vari-focal camera.Adjust lens focusAuto focus under current zoom rate Lens resetSheet 4-1 If there is “”, click the “Confirm” button in “Menu Operation” interface to go to the 2nd menu. Click “Return” button to go back to the previous menu interface.Appendix MaintenanceAttention:Please maintain the device according to the following instructions in order to ensure the image effect and long-term stable operation of the device.Maintenance for lens and mirror surfaceThe lens and mirror surface are covered with antireflection coating, so it may produce hazardous substance and lead to performance reduction or scratch, dimness etc when it is stained with dust, grease, fingerprint and so on, please refer to the following methods to deal with once dirt is found:Stained with dirtUse oil-free soft brush or hair dries to remove it gently.Stained with grease or fingerprintUse soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to change the cloth and wipe several times if it is not clean enough.Camera Body MaintenanceUse a soft dry cloth to clean the camera body when it is dirty, in case the dirt is hard to remove, use a clean dry cloth soaked with mild detergent and wipe gently, make it dry later. Don’t use volatile solvent like alcohol, benzene, thinner and etc or strong detergent with abrasiveness, otherwise it will damage the surface coating or reduce the working performance of the device.Maintenance for Dome CoverDome cover is an optical device, please don’t touch or wipe cover surface directly during installation and use, please refer to the following methods to deal with once dirt is found:Stained with dirtUse oil-free soft brush or hair dries to remove it gently.Stained with grease or fingerprintUse soft cloth to wipe the water drop or oil gently to make it dry, then use oil-free cotton cloth or paper soaked with alcohol or detergent to wipe from the lens center to outward. It is ok to change the cloth and wipe several times if it is not clean enough.Note•This manual is for reference only. Slight difference may be found in the user interface.•All the designs and software here are subject to change without prior written notice.•All trademarks and registered trademarks mentioned are the properties of their respective owners.•If there is any uncertainty or controversy, please refer to the final explanation of us.•Please visit our website or contact your local service engineer for more information.。
智能摄像头使用说明书
智能摄像头使用说明书欢迎您使用我们的智能摄像头产品。
本使用说明书将详细介绍产品的功能、设置方法和使用技巧，帮助您轻松掌握智能摄像头的操作流程。
一、产品概述智能摄像头是一种基于先进技术的安全监控设备，具备高清摄像、夜视、移动侦测和远程访问等功能。
通过连接互联网，用户可以随时随地通过手机或电脑监控家庭、办公室等场所的安全状况。
二、产品特点1.高清图像质量：智能摄像头采用高清图像传感器，支持1080P的视频分辨率，确保您获取清晰、逼真的监控画面。
2.夜视功能：配备红外夜视灯，可在低光环境下提供清晰的夜间监控画面。
3.移动侦测：通过内置的智能算法，当有人或物体进入监控范围时，摄像头将自动推送警报通知，确保您第一时间了解到异常状况。
4.云存储：支持云端录像存储，用户可以随时回看摄像头录制的视频，避免因存储设备损坏或丢失而导致的数据丢失问题。
5.远程访问：用户只需通过手机APP或电脑软件，即可随时远程查看摄像头实时画面，并进行远程操作。
三、产品设置1.连接电源：使用随附的电源适配器将摄像头连接到电源插座。
确保电源和电源线的接触良好，避免电源中断。
2.连接网络：将摄像头与家庭或办公室的无线网络进行连接。
通过手机APP或电脑软件，按照界面提示进行网络配置，确保摄像头成功连入网络。
3.安装摄像头：将摄像头放置在需要监控的位置，确保摄像头能够全方位覆盖监控区域，并调整摄像头的倾斜角度，使画面更加清晰。
4.设置移动侦测范围：根据实际需求，通过手机APP或电脑软件设置摄像头的移动侦测范围。
可以选择性监控某个区域，减少误报警情况的发生。
四、使用方法1.手机APP操作：下载并安装摄像头对应的手机APP，在注册登录后，您可以即时查看实时画面、进行录像回放、远程控制等操作。
2.电脑软件操作：下载并安装摄像头对应的电脑软件，在注册登录后，您可以通过电脑实时观看摄像头的画面，进行录像和截图等操作。
3.警报通知设置：通过手机APP或电脑软件，您可以自定义警报通知的方式，包括声音、振动和手机推送等。
TURBO HD U7T Series 狙击和枪塔摄像头用户手册说明书
TURBO HDU7T Series Bullet & Turret CameraUser ManualUser ManualThank you for purchasing our product. If there are any questions, or requests, do not hesitate to contact the dealer.This manual applies to the models below:Type ModelType I Camera DS-2CE19U7T-(A)IT3ZFType II Camera DS-2CE79U7T-IT3ZFThis manual may contain technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual. We will readily improve or update the products or procedures described in the manual.0100001080717Regulatory InformationFCC InformationPlease take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.FCC ConditionsThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.EU Conformity StatementThis product and - if applicable - thesupplied accessories too are marked with"CE" and comply therefore with theapplicable harmonized European standards listed under the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU.2012/19/EU (WEEE directive): Productsmarked with this symbol cannot bedisposed of as unsorted municipal waste inthe European Union. For proper recycling,return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: .2006/66/EC (battery directive): This productcontains a battery that cannot be disposedof as unsorted municipal waste in theEuropean Union. See the productdocumentation for specific batteryinformation. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information, see:.Industry Canada ICES-003 ComplianceThis device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.WarningThis is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.Safety InstructionThese instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.The precaution measure is divided into “Warnings” and “Cautions”.Warnings: Serious injury or death may occur if any of the warnings are neglected.Cautions: Injury or equipment damage may occur if any of the cautions are neglected. ArrayWarnings●In the use of the device, you must be in strict compliance with the electrical safety regulations of the nation and region.●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 12 VDC according to the IEC60950-1 standard. Refer to technical specifications for detailed information.●The camera is powered by the external DC power supply (12 VDC, 1 A) which is complied with the LPS, and the output current of this external DC power supply must be no more than 6 A.●Do not connect multiple devices to one power adapter to avoid over-heating or a fire hazard caused by overload.●Make sure that the plug is firmly connected to the power socket.●Make sure that the device is firmly fixed if wall mounting or ceiling mounting is adopted.●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cord, and then contact the service center.●Never attempt to disassemble the camera by unprofessional personal.Cautions●Do not drop the camera or subject it to physical shock.●Do not touch senor modules with fingers.●Do not place the camera in extremely hot, cold (the operating temperature shall be -40°C to 60°C), dusty or damp locations, and do not expose it to high electromagnetic radiation.●If cleaning is necessary, use clean cloth with a bit of ethanol and wipe it gently.●Do not aim the camera at the sun or extra bright places.●The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam.●Do not expose the device to high electromagnetic radiation or extremely hot, cold, dusty or dampenvironment.● To avoid heat accumulation, good ventilation is required for the operating environment.● Keep the camera away from liquid while in use for non-water-proof device.● While in delivery, the camera shall be packed in its original packing, or packing of the same texture. Mark Description1 Introduction1.1 Product FeaturesThe main features are as follows: ● High performance CMOS sensor ● IR cut filter with auto switch● OSD menu with configurable parameters ● Auto white balance ● Internal synchronization ● SMART IR mode● 4 in 1 video output (switchable TVI/AHD/CVI/CVBS) ● 3-axis adjustment1.2 Overview1.2.1 Overview of Type I CameraFigure 1-1 Overview of Type I CameraNote:Press and hold the switch button for 5 seconds to switch the video output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS 1.2.2Overview of Type II CameraBasePower CordFigure 1-2 Overview of Type II Camera Note:Press and hold the switch button for 5 seconds to switch the video output. Four kinds of video outputs are available: TVI, AHD, CVI, and CVBS2InstallationBefore you start:●Make sure that the device in the package is in good condition and all the assembly parts are included.●Make sure that all the related equipment is power-off during the installation.●Check the specification of the products for the installation environment.●Check whether the power supply is matched with your power output to avoid the damage.●Make sure the wall is strong enough to withstand three times the weight of the camera and the mount.●If the wall is cement, insert expansion bolts before installing the camera. If the wall is wooden, use self-tapping screws to secure the camera.●If the product does not function properly, contact your dealer or the nearest service center. Do NOT disassemble the camera for repair or maintenance by yourself.2.1Installation of Type I Camera2.1.1Ceiling Mounting without Junction BoxBefore you start:Both wall mounting and ceiling mounting are suitable for the bullet camera. Ceiling mounting will be taken as an example in this section. And you can take steps of ceiling mounting as a reference for wall mounting.Steps:1.Paste the drill template (supplied) to the place whereyou want to install the camera.2.Drill the screw holes and the cable hole (optional) inthe ceiling according to the drill template.Figure 2-1Drill TemplateNote:Drill the cable hole, when adopting ceiling outlet toroute the cable.3.Route the cables through the cable hole, or the sideopening.4.Fix the camera to the ceiling with supplied screws.Figure 2-2Fix the Camera to the Ceiling Note:●The supplied screw package contains self-tapping screws, and expansion bolts.●For cement wall, expansion bolts are required to fix the camera. For wooden wall, self-tapping screws are required.5. Connect the corresponding power cord, and video cable.6. Power on the camera to check whether the image on the monitor is gotten from the optimum angle. If not, adjust the surveillance angle.Figure 2-3 3-axis Adjustment1) Loosen the No.① adjusting screw to adjust the pan position [0° to 360°]. Tighten the No.① adjusting screw.2) Loosen the No.② adjusting screw to adjust the tilting position [0° to 90°]. Tighten the No.② adjusting screw.3) Loosen the No.③ adjusting screw to adjust the rotation position [0° to 360°]. Tighten the No.③ adjusting screw. 2.1.2 Ceiling Mounting with Junction Box Before you start:● You need to purchase a junction box separately.● Both wall mounting and ceiling mounting are suitable for the bullet camera. Ceiling mounting will be taken as an example in this section. And you can take steps of ceiling mounting as a reference for wall mounting. Steps:1. Paste the junction box’s drill template on the ceiling.2. Drill screw holes and the cable hole (optional) in the ceiling according to the holes of the drill template.Figure 2-4 Drill TemplateNote:Drill the cable hole, when adopting ceiling outlet to route the cable.3. Take apart the junction box, and align the screw holes of the bullet camera with those on the junction box’s cover.4. Fix the camera on the junction box’s cover.Figure 2-5Fix the Camera with the Junction Box 5.Attach the junction box’s body to the ceiling byaligning the screw holes of the junction box.6.Secure the junction box’s body with supplied screwson the ceiling.Figure 2-6Fix the Camera to the Ceiling7.Route the cables through the cable hole, or the sideopening of the junction box.bine the junction box cover with its body.Figure 2-7Fix the Junction Box Cover back to its Body 9.Refer to step 6 of 2.1.1 Ceiling Mounting withoutJunction Box to complete the installation.2.2Installation of Type II Camera2.2.1 Ceiling Mounting without Junction BoxBefore you start:Both wall mounting and ceiling mounting are suitable for the turret camera. Ceiling mounting will be taken as an example in this section. And you can take steps of ceiling mounting as a reference for wall mounting.Steps:1.Paste the drill template to the place where you wantto install the camera.2.Drill the screw holes according to the drill templateand the cable hole (optional) in the ceiling.Figure 2-8Drill TemplateNote:Drill the cable hole, when adopting the ceiling outlet to route the cable.3.Loosen screws to remove the clip plate, and take outthe main body.Clip PlateFigure 2-9Remove the Clip Plate4.Fix the mounting base on the ceiling with suppliedscrews.Figure 2-10Fix the Mounting Base on the Ceiling Note:●The supplied screw package contains self-tapping screws, and expansion bolts.●For cement wall, expansion bolts are required to fix the camera. For wooden wall, self-tapping screws are required.5.Route the cables through the cable hole, or the sideopening.6.Install the main body to the mounting base and insertthe clip plate.Figure 2-11Install the Turret Camera7.Tighten the screws with the screw driver.8.Connect the corresponding cables, such as powercord, and video cable.9.Power on the camera to check whether the image onthe monitor is gotten from the optimum angle. If not, adjust the camera according to the figure below to get an optimum angle.Pan Position[0° to 360°]Tilt Position[0° to 75°]Rotation Position[0° to 360°]Figure 2-123-axis Adjustment1).Hold the camera body and rotate the enclosure toadjust the pan position [0° to 360°].2).Move the camera body up and down to adjust thetilt position [0° to 75°].3).Rotate the camera body to adjust the rotationposition [0° to 360°].2.2.2 Ceiling Mounting with Junction BoxBefore you start:●You need to purchase a junction box separately.●Both wall mounting and ceiling mounting are suitable for the turret camera. Ceiling mounting will be taken as an example in this section. And you can take steps of ceiling mounting as a reference for wall mounting. Steps:1.Paste the junction box’s drill template on the ceiling.2.Drill screw holes and the cable hole (optional) in theceiling.Figure 2-13Note:Drill the cable hole, when adopting the ceiling outlet to route the cable.3.Refer to step 3 of 2.2.1 Ceiling Mounting withoutJunction Box to take out the camera’s main body.4.Take apart the junction box, and align the screw holesof the camera with those on the junction box’s cover.5.Fix the camera’s mounting base on the junction box’scover with three PM4 × 10 screws.Figure 2-14Secure Screws on Junction Box’s Cover 6.Secure the junction box’s body on the ceiling with fourPA4 × 25 screws.JunctionBox BodyFigure 2-15Secure the Junction Box’s Body on Ceiling bine the junction box cover with its body bytightening four screws on junction box’s cover.Figure 2-16Fix the Junction Box8.Repeat steps 5 to 9 of 2.2.1 Ceiling Mounting withoutJunction Box to complete the installation.3 Menu DescriptionPurpose:Call the menu by clicking the button on the PTZ Control interface, or call preset No.95. Steps:1. Connect the camera with the TVI DVR, and the monitor, shown as the figure 3-1.Figure 3-1 Connection2. Power on the analog camera, TVI DVR, and the monitor to view the image on the monitor.3. Click PTZ Control to enter the PTZ Control interface.4. Call the camera menu by clicking button, or call preset No. 95.Figure 3-2 Main Menu Overview5. Click the direction arrow to control the camera.1). Click up/down direction button to select the item. 2). Click Iris + to confirm the selection.3).Click left/right direction button to adjust the valueof the selected item.3.1VIDEO FORMAT************************************,8MP@15fps, 5MP@20fps, 4MP@25fps, 4MP@30fps,2MP@25fps, and 2MP@30fps.Note:●When switching the video output as CVBS, you canset the video format as PAL, or NTSC.●When switching the video output as AHD, only5MP@20fps is supported.●When switching the video output as CVI, you can set***************************,or8MP@15fps.●Click SAVE & EXIT to validate the video formatsettings.3.2EXPOSUREExposure describes the brightness-related parameters, which can be adjusted by EXPOSURE MODE, and AGC.Figure 3-3EXPOSUREEXPOSURE MODEYou can set the EXPOSURE MODE as GLOBAL, BLC, and WDR.●GLOBALGLOBAL refers to the normal exposure mode which performs exposure according to the whole image brightness.●BLC (Backlight Compensation)BLC (Backlight Compensation) compensates light for the front object to make it clear, but this may cause the over-exposure of the background, where the light is strong.●WDR (Wide Dynamic Range)The WDR helps the camera provide clear images even under backlight circumstances. When both very bright and very dark areas simultaneously exist in the image, WDR balances the brightness level of the whole image to provide clear images with details.AGC (Automatic Gain Control)It optimizes the clarity of the image in poor light conditions. The AGC level can be set as HIGH, MEDIUM, or LOW.Note:The noise will be amplified when setting the AGC level. The higher the level is, the more obvious the noise is. 3.3DAY/NIGHTCOLOR, BW (Black White), and AUTO are selectable for DAY/NIGHT switch.COLORThe image is colored in day mode all the time.B & W (Black and White)The image is black and white all the time, and the IR LIGHT turns on in the poor light conditions.You can turn on/off the IR LIGHT and set the value of SMARTFigure 3-4B & W●IR LIGHTYou can turn on/off the IR LIGHT to meet the requirements of different circumstances.●SMART IRThe Smart IR function is used to adjust the light to its most suitable intensity, and prevent the image from over exposure. The SMART IR value can be adjusted from 0 to 3. The higher the value is, the more obvious effects are. AUTOAutomatically switch Color, or BW (Black and White) according to actual scene brightness.You can turn on/off the IR LIGHT, and set the value of SMART IR in this menu.Figure 3-5AUTO●IR LIGHTYou can turn on/off the IR LIGHT to meet the requirements of different circumstances.●SMART IRThe Smart IR function is used to adjust the light to its most suitable intensity, and prevent the image from over exposure. The SMART IR value can be adjusted from 0 to3. The higher the value is, the more obvious effects are.●Dà N Threshold (Day to Night Threshold)Day to Night Threshold is used to control the sensitivity of switching the day mode to the night mode. You can set the value from 1 to 9. The larger the value is, the more sensitive the camera is.●Nà D Threshold (Night to Day Threshold)Night to Day Threshold is used to control the sensitivity of switching the night mode to the day mode. You can set the value from 1 to 9. The larger the value is, the more sensitive the camera is.3.4 VIDEO SETTINGSMove the cursor to VIDEO SETTINGS and click Iris+ to enter the submenu. IMAGE MODE , WHITE BALANCE , BRIGHTNESS , CONTRAST , SHARPNESS , SATURATION, 3DNR , and MIRROR are adjustable.Figure 3-6 VIDEO SETTINGSIMAGE MODEIMAGEMODE is used to adjust the image saturation, and you can set it as STD (Standard), or HIGH -SAT (High Saturation).WHITE BALANCEWhite balance, the white rendition function of the camera, is to adjust the color temperature according to the environment. It can remove unrealistic color casts in the image. You can set the mode as AUTO , or MANUAL . ● AUTOUnder AUTO mode, white balance is being adjusted automatically according to the color temperature of the scene illumination.● MANUALYou can set the R-GAIN /B-GAIN value from 1 to 255 to adjust the shades of red/blue color of the image.Figure 3-7 MANUAL MODEBRIGHTNESSBrightness refers to the brightness of the image. You can set the BRIGHTNESS value from 1 to 9 to darken or brighten the image. The higher the value is, the brighter the image is.CONTRASTThis feature enhances the difference in color and light between parts of an image. You can set the CONTRAST value from 1 to 9.SHARPNESSSharpness determines the amount of detail an imaging system can reproduce. You can set the SHARPNESS value from 1 to 9.SATURATIONAdjust this feature to change the saturation of the color. The value ranges from 1 to 9.3DNR (Digital Noise Reduction)The 3DNR function can decrease the noise effect, especially when capturing moving images in poor light conditions and delivering more accurate and sharp image. You can set the 3DNR value from 1 to 9.MIRROROFF, H, V, and HV are selectable for mirror.OFF: The mirror function is disabled.H: The image flips 180° horizontally.V: The image flips 180° vertically.HV: The image flips 180° both horizontally and vertically.3.5FACTORY DEFAULTMove the cursor to FACTORY DEFAULT and click Iris+ to reset all the settings to the factory default.3.6EXITMove the cursor to EXIT and click Iris+ to exit the menu without saving.3.7SAVE & EXITMove the cursor to SAVE & EXIT and click Iris+ to save the settings, and exit the menu.UD10992B。
kdv7810,7910用户指南
高清系列用户指南
呼叫和应答
z 免打扰：终端拒绝一切呼叫。
说明 进入 系统设置＞
用户设置＞应答模式，可以设置终端的应答模式。
2.2.2. 退出会议
点对点会议中
按 键，终端退出会议，同时结束会议 多点会议中，终端未发起双流
按 键，直接退出会议 多点会议+双流
1、 按 键，弹出快捷菜单；
2、 用方向键
高清系列终端 用户指南
产品版本：V1.1.3
1
声明 Kedacom™、TrueSens™为苏州科达科技有限公司的商标，不得擅自使用。 苏州科达科技有限公司版权所有，保留所有权利。 未经本公司书面许可，不得通过电子、机械或其他任何方式复制或传播本文档的全部或任何 部分用于任何用途，亦不得将本文档翻译为其它语言或转换为其它格式。 我们尽最大努力来保证本手册信息的正确性，并声明不对其中的印刷或书写错误负责。本手 册信息如有更新，恕不另行通知。如需获取最新信息请登录我们的网站 。
IP 地址，如 172.16.1.1
IP 地址，如 172.16.1.1 别名，如 Hong Kong，北京 E.164 号码，如 021
2.1.1. 主菜单界面呼叫
通过主菜单界面呼叫，请执行以下步骤： 1、 在主菜单界面的呼叫信息输入框中，输入呼叫信息；
会议形式 点对点会议
多点会议
呼叫信息 终端的 IP 地址、E.164 号、别名 MCU 的 IP 地址、E.164 号、别名 会议的 E.164 号（推荐）
3
高清系列用户指南
1.6. 字符输入方法
终端支持使用遥控器输入英文字母、数字和简体中文汉字。 z 按遥控器上的 键可实现不同输入法之间的切换； z 按数字键 可以输入特殊符号，如@ # ? $等； z 按 键可以删除输入的字符。
威林视讯科技有限公司产品手册说明书
服务热线:400-150-1816电话*************传真*************地址:北京市昌平区创新路27号昌平科技园区3号5层网址：北京威林视讯科技有限公司VLINC专业视听显控产品手册专业音视频产品与解决方案提供商2022北京威林视讯科技有限公司COMPANY PROFILE公司简介威林的愿景威林的使命威林的核心价值观威林视讯是专注于显示控制一体化解决方案的科技企业，经过多年发展，已经成长为国内显控领域的知名品牌，拥有多项独立自主的知识产权。
自成立以来，威林视讯连续推出多个创新产品，包括纯硬件图像处理器，到图像综合管理平台，从分布式处理器到可视化分布式系统，从46寸液晶拼墙到70寸液晶拼墙，从高清到8K 系统整体解决方案，威林视讯的每一次创新都引导着行业的发展和进步，威林视讯提出的所见即所得，所得即可操作的理念，已经成为显控系统的行业标准。
威林视讯有拥有强大的研发实力和方案设计服务能力，核心团队均具备10年以上的行业经验，与北京大学，北京交通大学等多所高校建立产学研合作关系，在掌握图像算法，具备产品设计能力的基础上，对于客户的订制化需求能够快速响应，从研发到制造，从设计到施工，建立了一整套的客户服务体系。
威林视讯在北京，上海，深圳，广州，南京，成都，南昌，乌鲁木齐等国内主要城市均设有分支机构，具备国内省会级城市的快速响应能力。
威林视讯的团队成功完成多个典型案例，包括北京新机场，北京公安局合成作战指挥中心，天津市委宣传部，国家气象局，火箭军某基地，上海联通，广州移动，酒泉卫星发射基地，滴滴出行等标志性项目，均为所在领域的标杆项目。
共同成长作为一个发展中的公司，威林愿意帮助客户成长，努力给客户提供技术培训，商务支持等各种支持，希望客户在竞争中取胜，威林的体系对客户保持开放，愿意帮助客户建立认证体系和获得各种知识产权。
同样，威林也希望能够跟员工一起成长，公司鼓励员工参加各种学历或者非学历教育并承担部分学费，公司内部也会不断建设良好的分享，培训和晋升的体系，希望能够鼓励每一位员工都能发挥自己最大的价值。
富士智能2021产品选型手册说明书
产品参数
外观颜色 机箱 面板 外观尺寸 工作温度 工作湿度 电源电压 通讯方式 主控器 最优识别距离 最大识别⻆度 语音对讲
香槟金 1.5mm钣金喷塑工艺 防眩光AG玻璃 380*344*1500mm -25℃〜70℃ ≤95%，无凝露 AC220V±10%50Hz TCP/IP通讯 ⻋牌识别控制器+无刷道闸控制器 3～5M ⻋牌与⻋道夹⻆≤45° 对讲距离≤1米
01
PRODUCTION
INTRODUCTION
COMPANY
公司简介
COMPANY INTRODUCTION
富士智能 ，成立于2004年 ，是智能出入口管理设备供 应商 、出入口管理系统解决方案提供商 ，智慧生态 环境 解 决方案专业供应商。
富 士 智 能，坚 持 以 人 为 本 、以 质 量 求 生 存 、以 服 务 创 市 场的信念，⻓期致力于智慧社区、智慧写字楼、智慧商业综 合体 、智慧景区、智慧园区 、智慧 校园 等 智慧生态 环境建 设 ，持续为数十万场景守好⻔ 、把好关 、收好费 ，已经成为 出入口智能管理和智慧城市生态环境建设的重要实践者、 推动者和引领者。
306 mm
230 mm
w w w. f u j i c a . c o m . c n
09
智能停⻋场管理系统
全球智慧城市生态环境建设重要实践者和引领者
FJC-TZ286
“金刚”机器人无人值守智慧⻋场管家
智慧通行卓然出众
产品特点
采用高强度新合金科技材料打造，无惧岁月洗礼，品质坚若磐石 17英寸LCD高亮触摸屏可显示停⻋时⻓、收费信息等，闲时可播放 广 告 或物管通知，为物业增值创收的同时提高管理效率 全方位出入方式：动态二维码、⻋牌识别等多种出入方式，安全、高效、 顺畅通行 多样化缴费形式：支持使用微信/支付宝/聚合码等扫码（ 主扫/被扫）缴 费出场，支持使用现金缴费出场，可通过微信扫码找零 支持电子发票 一键问询：⻋主可通过远程协助按钮一键发起远程服务请求，与服务中 心进行双向语音通话，迅速获取人性化服务 远程对讲：支持服务中心主动远程连接现场，为⻋主提供协助服务 ，从 而打造无人值守的工作环境，彻底取代值守岗亭，降低人力成本 具备出色的系统稳定性、扩展性及实用性，适用于各种高端停⻋场
Tecohoo-V720,视频会议摄像机,usb高清720P免驱
Tecohoo V-720 高清视频会议摄像机∙产品名称：Tecohoo V-720 高清视频会议摄像机∙产品品牌：TECOHOO∙产品型号：Tecohoo V-720∙产品重量：1150g/1500g(包装前后)∙产品尺寸：240 x 145 x 95mm∙产品简介：USB接口,免驱即插即用，全方位云台，720P(1280*720)高清视频会议摄摄像机Tecohoo V-720采用新型800万像素CMOS,2.5mm高清广角镜头,图像还原度高，视角更宽广（可达170度视角）,真正720P优质图像（1280*720分辨率30帧/秒）；Tecohoo V-720采用 USB接口，无需视频采集卡，免驱动即插即用设计，可上下左右旋转，另Tecohoo V-720用高性能全焦镜头,无论您是观看30mm或是5米远的场景图像清晰，Tecohoo V-720广角视频会议摄像头都能够为您承现出最优质及高清晰画面，省去手动调焦烦琐及尴尬场面！本款产品适用于中小型会议室、个人桌面级的视频采集，适用于各种视频会议软件及QQ、MSN、SKYPE等视频通话。
Tecohoo V-720 高清视频会议摄像机是视频会议系统业界专用摄像机。
外形美观、造型别致、结构紧凑；运行平稳、无噪声、云台转速可调；定位精确、停止时无偏差抖动，可靠性高；可长期稳定运行，使用方便，无须维护。
具有多点目标预置、记忆、区域扫描、辅助开关控制、红外遥控等功能。
360°水平无限制扫描范围，兼容多种控制协议，采用标准RS422/RS232控制方式。
若想在远程控制旋转/倾斜/的运作下要获得高质量的彩色图像，Tecohoo V-720 广角视频会议摄像头无疑是及佳之选取，且封装简易、紧密。
此摄像头具有高速、在宽视场范围内旋转，倾斜运作安静。
适于用光线不好的条件下在视频会议、远距离学习、团体培训、监控、运动会、音乐会及互联网通讯的网络传播应用中。
Tecohoo V-720 是您最佳的选择。
汉邦高科说明书
第一章产品简介1.1 概述HB7000及HB7200系列数字硬盘录像机是为构建视音频数字监控系统而设计开发的。
产品基于NXPTrimedia和TIDM645DSP芯片，采用H264缩算法、嵌入式实时多任务操作系统（RTOS）和一体化的设计，在单板上集成了视音频采集、压缩、存储、网络传输、多路云台控制、报警检测等功能，HB7000及HB7200系列实现了整机单板结构，保证了系统的高集成度和高可靠性。
HB7000及HB7200系列采用新文件系统，称MFS,即流媒体文件系统；新文件系统是基于micosoftFAT32基础上，创新的适合于DVR专用文件系统；长时间运行不产生磁盘碎片；合理的流媒体操作调度，操作反应快；增加MFS中关键信息校验保护，避免关键区域硬盘损坏带来的灾难性问题；HB7000及HB7200系列支持TCP/IP协议（支持A R P、RA RP、TCP、UDP、P P PO E、DDNS、DHCP；采用双码流技术，在保证广域网传输效果的同时不影响本地存储。
提供完备的网络监控客户端软件；同时也支持IE浏览任何一路视频信号、云台控制、视频点播等。
HB7000 及HB7200 系列提供了多种接口，支持DVI 数字显示接口、USB2.0 高速备份。
部分型号支持视频多路回放功能（7200 系列不支持），HB7000 及HB7200 系列主机仅支持遥控器和鼠标操作。
1.2 产品分类HB7000系列CIF分辨率嵌入式数字硬盘录像机：HB7200系列D1分辨率嵌入式数字硬盘录像机：第二章技术指标及主要功能2.1 技术指标1、视频参数视频输入：复合视频输入PAL制（25帧/秒）NTSC制（30帧/秒）（BNC接口，1Vp-p,75Ω）视频输出：一路复合视频输出（BNC接口，1Vp-p,75Ω）PAL制（625线）NTSC 制（525线）一路VGA模拟及一路DVI数字显示输出(频率：60HZ，分辨率可调：支持800X600、1024X768、1280X768、1360X768)2、音频参数音频输入：HB7000系列4/8/16路，HB7200系列4/8路音频输入（BNC接口，输入阻抗：10KΩ，输入幅度：Vp-p=2.0VLINE）音频输出：一路音频输出（BNC接口，输出阻抗：10KΩ，输出幅度：Vp-p=2.0VLINE）语音对讲：输入（3.5MM接口，输入阻抗：10KΩ，输入幅度：Vp-p=2.0VLINEin/50mVMICin）输出（BNC 接口，输出阻抗：10KΩ，输出幅度：Vp-p=2.0VLINE）3、视频压缩：压缩算法 H.264，分辨率 CIF：PAL(352X288）25 帧/秒/路；NTSC(352X240)30 帧/秒/路；分辨率 D1：PAL(704*576)25 帧/秒/路；NTSC（704X480）30 帧/秒/路；HB7204、HB7208 为高画质 D1 4、音频压缩：HB7000系列压缩算法G.711或G.722，HB7200系列压缩算法G.711，音频采样率8K采样/秒，16bit/采样点5、操作系统：嵌入式实时操作系统（RTOS）6、硬盘接口：SATA接口，支持48bitLBA工作模式7、报警接口报警输入：报警输入支持常开/常闭两种形式，HB7000提供4/8/16路报警输入，HB7200系列提供4/8路报警输入报警输出：2路报警输出（常开，继电器输出）8、串行接口: RS485，支持网络透明通道连接，支持串口控制键盘9、操作方式: 多功能红外遥控器，PS/2鼠标,串口控制键盘10、备份接口：2个USB2.0接口，支持数据备份功能11、网络接口：10M/100M自适应以太网端口12、视频环通矩阵：所有型号均支持视频环通，HB7200系列（HB7204除外）、HB8008,HB7016、HB8008R及HB7016R支持视频矩阵13、供电电源：220±30%V，50±3%HZ，110±20%V，60±3%HZ可选14、机箱尺寸：HB7004 325X220X55，HB7008、HB7016、HB7204、HB7208405X310X55(长X宽X高，毫米）；2.2 主要功能本系列嵌入式数字硬盘录像机采用高性能嵌入式实时多任务操作系统（RT OS）和嵌入式处理器，完美实现构建监控系统所需要的各种功能。
1版本2.0 Bush Baby 双4K Wi-Fi隐形双摄像头火警器说明书
1Version 2.0 Bush Baby Smoke Detector with Dual 4K Wi-Fi Hidden Cameras SKU: BB4KWifiTwoCamSmokeTHANK YOU FOR PURCHASING THEBB4KWIFITWOCAMSMOKEPlease read this manual before operating the BB4KWifiTwoCamSmoke and keep it handy. Your purchase should include:1 x BB4KWifiTwoCamSmoke1 x Manual2 x 128GB Micro SD Card1 x MicroSD Card Reader2 Version 2.0GET FAMILIAR WITH YOURBB4KWIFITWOCAMSMOKE3 Version 2.04 Version 2.0BEFORE YOU GET STARTEDIMPORTANT INSTRUCTIONS BEFORE GETTING STARTED1.In order to operate your device, youmust download the LookCamPro app toyour smartphone or tablet.o Android:/lcpdroido iPhone:/lcpios2.This device can only make one Wi-Fipairing attempt and then the TUT signalwill disappear. If the pairing process isunsuccessful the device will be requiredto be sent in for a factory reset. Pleaseverify the name of your router’s Wi-Fisignal and password, and follow thesteps on the next page to ensure yourdevice has the best chance possible ofpairing with your router.5 Version 2.0•This device will only connect to routers that produce a 2.4 GHz signal. Pleasecontact your internet service provider todetermine if your router is 2.4 or 5.8GHz.•If your wireless network has a password using any special characters, pleasechange it so it is using onlynumbers/letters.•Turn off your phone’s mobile d ata prior to connecting to the device’s wi-fisignal. Some phones will ignore wi-ficonnections that do not have internetaccess if mobile data is enabled.•Make sure you are within 10 feet ofyour router when pairing the devicewith wi-fi. If the device gets hardwiredfor power, pair the unit by powering itwith the test plug prior to hardwiring itin.6 Version 2.0Note: If you are using this anywhere other than the US, you will need to purchase a converter in order to use the device and avoid damaging the product. Because different countries use different voltages in their electrical wiring, you will need a converter that adapts to the current in your particular country.IMPORTANT: You will need to contact a professional electrician to install this device correctly. We are not responsible for any damages or incorrect installation. Minigadgets cannot provide any instructions related to hardwiring this device into an electrical system.IMPORTANT WARRANY INFORMATION:If the warranty sticker on your device has been removed or tampered with, your lifetime warranty will be voided. You may be charged fees or denied a return should this happen.7 Version 2.0STEP ONE – ADDING THE DEVICE TO THE APP & PAIRING WITH WI-FI FOR REMOTE VIEWING Note: If you do not want to use your device for remotely live streaming/video playback, you can still use it as a DVR unit. You will be required to connect your phone to the device’s wi-fi signal in order to view the live stream, play videos back via the app, or modify camera settings. If you wish to use it as a DVR unit, when you get to #5 and see ‘AP added device, whether the network?’ choose ‘No’ and proceed to Step Two.CONNECTING TO YOUR DEVICE’S WI-FI SIGNAL In order to first use your device and set it up, you must first connect to its wi-fi signal.1.Power the device on.•If your unit is capable of beinghardwired, either insert the testplug that came attached with itinto an outlet, or have it8 Version 2.0professionally hardwired intothe existing electrical system2.Turn on your phone’s Wi-Fi and wait upto 5 minutes for the device to generatea Wi-Fi signal (this will match the UIDon the sticker, ex: TUTxxxxxxx)3.Once the device generates its Wi-Fisignal, connect to it via the Wi-Fisettings on your phone. It should displayas ‘Connected’ or ‘Current Network’.Note: Some devices may produce a warning that the network has no internet access and will ask if you want to use mobile/cellular data instead. Choose to stay connected to the wi-fi connection.Note: For iOS devices, you must wait until the Wi-Fi signal appears next to your Phone Carrier Name at the top of your phone screen.9 Version 2.04.After connecting, open the LookCamProApp.5.The app will automatically detect thecamera, and display an “AP addeddevice, whether the network?”message. Select “Sure”.6.The app will take you to a new screen toselect the network you wish to pair thedevice with.7.Put in the password for the desirednetwork and press ‘Sure’. The camerawill reboot and should come onlinewithin 5 minutes.•Note: Please follow the tips onpage 5 to ensure a properconnection is formed betweenyour device and the router. Note: You will be prompted to change the device password the first time you view the camera video feed. We suggest that you do10 Version 2.0change this to prevent any unauthorized viewing of your camera. The default password is 6666.IMPORTANT: You must keep this password in a safe place. If you ever need to access the camera from a different phone or reinstall the camera app, this password will be required to re-add the camera. If you forget the password, a factory reset will be required. In order to factory reset the device, it will most likely need to be sent to us via an RMA (return merchandise authorization). If you have any questions regarding this, please call us at 770-694-6921.STEP TWO – SETTING YOUR DEVICE UP TO RECORD TO THE MICROSD CARDNote: All steps from here onwards require you to have completed step one and have already 11 Version 2.0added the device to the LookCamPro app. Do not continue without completing step one. Note: Your device will come with a 128GB MicroSD card already installed in it. To get started with capturing video, follow the steps below.1.Open the LookCamPro application onyour smartphone or tablet.2.Press the settings wheel on the far right•This is the ⚙ icon3.You will be taken to a screen withmultiple options. Select the ‘Record’option. Options will be explained below.•Note: On iOS devices, this will bethe ‘SD Card Setting’ option.•Record Length– This controls the length of your video recordings and can be setbetween 5 and 30 minutes. (Note: This only 12 Version 2.0controls the video length for the‘Throughout the Video’ and ‘Timing Video’video modes. For controlling video length on the ‘Alarm Video’ video mode, please referto Step 3)•Video Stream – This controls whatresolution your unit records videos at.(Note: These devices can currently onlyrecord in 720P)•Video Mode – This controls how the device captures videos.•Stop Video– The unit will not record any videos to the microSD card.•Throughout the Video– The unitwill record continuously 24/7 to themicroSD card•Alarm Video– The unit will recordto the microSD card only when thereis motion (Note: Make sure to follow 13 Version 2.0Step Three for enabling motiondetection)•Timing Video – The unit will recordcontinuously 24/7 to the microSDcard only between the specifiedstart and end times (time is inmilitary format)•Record Audio – Enable/disable this for audio along with video recording.•Video Coverage– Enable/disable this for loop recording (when the microSD card fills up, the oldest video will be deleted to make room for a new one)STEP THREE – SETTING YOUR DEVICE UP TO DETECT MOTIONNote: If you do not want to record to the microSD card based off motion, or do not want to receive motion detection alerts on your phone, you can skip this entire section.14 Version 2.0SETTING UP MOTION DETECTION1.Open the LookCamPro application onyour smartphone or tablet.2.Press the settings wheel on the far right•This is the icon3.You will be taken to a screen withmultiple options. Select the ‘Alarm’option. Options will be explained below.•Note: On iOS devices, this will bethe ‘Alarm Setting’ option.•Motion Detection Switch– Enable this if you have your device’s Video Mode set to‘Alarm Video’.•Note: This is required to be enabledif you want to receive motionnotifications, or to record whenthere is motion.•Alarm Push – Enable this if you want to receive alerts on your phone when thedevice detects motion.15 Version 2.0•Mobile Detection Video– This feature will not apply to your device and can be on oroff.•Alarm Recording Time(s)– This is how long of a video clip will be taken when motion isdetected. This can be set between 10 and60 seconds.•Note: If motion is detected after thefirst recording begins, another onewill begin, and so on.•Alarm Delay– This is how long the app will wait in between sending alarm notifications to your phone.•Note: If it is set to 30 and there ismotion, you will only receive alertsevery 30 seconds•Detection Sensitivity – This controls how sensitive the unit is to detecting motion.You will want to test the device to seewhich option is best suited for theenvironment your device is in.16 Version 2.0STEP FOUR – CHANGING THE DEFAULT DEVICE PASSWORDNote: For security purposes, we strongly recommend that you change your device’s default password from 6666. If you change your device’s password, make sure to store the password securely. If you ever need to re-install the application or add the device to another phone, you will need the new password. CHANGING YOUR DEVICE’S PASSWORD1.Open the LookCamPro App.2.Press the settings wheel on the far right•This is the icon3.You will be taken to a screen withmultiple options. Select the ‘User’option.•Note: On iOS devices, this will bethe ‘User Setting’ option.4.On the next screen, put in 6666 for the‘Old pwd’ field17 Version 2.05.Put in your desired password in boththe ‘New pwd’ and ‘New pwd again’fields, and then select ‘Done’.•Note: Your password must bebetween 4 and 31 digits.•Note:It is highly recommendedyou enable the ‘show password’option to reveal your text as it istyped. This will help avoid anypotential typos in the password. LIVESTREAMING YOUR DEVICENote: If your device has not been paired with a router, you will need to connect your smartphone or tablet to the device’s wi-fi signal.Note: If this is the first time opening the live stream, you will be prompted to change the device password. We suggest that you do change this to prevent any unauthorized18 Version 2.0viewing of your camera. The default password is 6666.Note: This requires you to have completed Step One.1.Open the LookCamPro application2.Tap your finger on your device listingand the live stream should open.Options will be explained below.•Top Left↕ Icon– This will mirror the live stream vertically. This also affects videoorientation for video recordings.•2nd Top Left↔ Icon– This will mirror the live stream horizontally. This also affectsvideo orientation for video recordings. •Light Bulb Icon – This will enable/disable the working wi-fi LED light on your unit(blue LED).•☽Icon– Controls night vision.19 Version 2.0o Note: This option is not applicable to all units because not all units havenight vision, but they use the sameapplication.•T Icon– This icon will not apply to your device. Can be on/off.•2K Icon – This allows you to choose your live streaming resolution. You can choosebetween: 720P, 1080P, 2K, and 4k•‘Video’ Camera Icon– This will start a video recording while in the live stream and saveit to the app on your phone.o Note: This does not save video tothe microSD card, that is controlledseparately.•‘Photo’ Camera Icon– This will take a snapshot of the live stream and save it tothe app on your phone.o Note: This does not save thesnapshot to the microSD card.20 Version 2.0•‘Hold to Talk’ Microphone Icon– Thisbutton does not apply to your devicebecause it does not come equipped with atwo-way microphone.•‘Audio’ Speaker Icon– This will enable you to listen to the audio while viewing the livestream.o Note: Some phones may require youto turn the volume up after enablingthis•Bottom Right ↔ Icon– This will allow you to adjust settings for the live stream, suchas brightness and contrast levels (theserange between 0 and 100) o Note: The ‘Horn’ and ‘Microphone’sliders will not apply to your device. REVIEWING VIDEOS VIA THE LOOKCAMPRO APPLICATIONNote: This requires you to have completed Step One.21 Version 2.01.Open the LookCamPro application andyou will see four tabs at the bottom ofthe main menu: Camera, Photo, Video,and Playback. These will be explainedbelow.•Note: If you do not see thesefour tabs, please press the≡iconin the top left corner once. •Reviewing Photos Taken in Live Stream–Select the ‘Photo’ tab and then choose your device. You can then review photos takenduring the live stream.•Reviewing Videos Taken in Live Stream –Select the ‘Video’ tab and then choose your device. You can then review videos takenduring the live stream.•Reviewing Videos Recorded to the MicroSD Card –Select the ‘Playback’ tab and thenchoose your device. Select the date youwish to review video files for.22 Version 2.0•Note:To delete recordings from the microSD card, hold your finger downon the video selection, and when itasks ‘Are you sure to delete?’,choose ‘Sure’23 Version 2.024 Version 2.0 TRANSFERRING FILES TO YOUR PC1. Remove the MicroSD Card from your device (see page 4).2. Use the MicroSD Card Reader to connect the MicroSD card to yourcomputer.3. Locate “Removable Disk” inside the (My) Computer folder.• AutoPlay Removable Disk > Openfolder to view filesOr…Go to Start > Computer > Removable Disk4.Open the Removable Disk drive.5.Open the folder containing the files.6.Double click the file you want to view. Note: You can easily manage your MicroSD cardrecordings using the phone app.25 Version 2.0TROUBLESHOOTINGTHE DEVICE WON’T TURN ON•Make sure the plug is securelyconnected to the device.o Double check that theconnection is secure.o If battery operated, make surethe battery is fully charged.o If plugging the unit in, try adifferent cable or AC adapter. CANNOT RECORD TO MICROSD CARD•Make sure the MicroSD card is inserted into the unit fully. It’s spring loaded soyou should feel it click into place.•Restart the unit via the app, or unplug it and plug it back in.•If there is no space reading on yourcard, try formatting the microSD card 26 Version 2.0with the ‘Format SD Card’ button in the‘Record’ sectiono This will be in the ‘SD CardSetting’ section on iOS devices HOW TO REMOTELY FACTORY RESET THE DEVICE•You can factory reset the camera from the app by opening the app, selectingthe settings wheel icon ( ), scrollingto the bottom, and selecting “ResetDevice”.•You do not have to delete the app in order to reset the device.•This will un-pair the device from any networks and reset the password backto the default of 6666. The device’s wi-fisignal will begin broadcasting again.o Note: This requires th e camera’sstatus to be ‘ONLINE27 Version 2.0HOW TO FACTORY RESET THE DEVICE• A factory reset will restore all settings to their original factory settings.•Most of the time, you will need to send the device in for us to perform a factoryreset. Please contact us at 770-694-6921 for assistance. Choose the‘Minigadgets’ option.THE DEVICE IS NOT BROADCASTING ITS WIFI SIGNAL•Please unplug the device, wait 30seconds, and then plug it back in.THE APP CANNOT FIND THE CAMERA/”SEARCH LAN/SEARCH NETWORK” NOT FINDING ANYTHING•Ensure you are still connected to the device’s Wi-Fi signal by going to yourphone’s Wi-Fi settings.28 Version 2.0•Turn off yo ur phone’s mobile data, then re-join the device’s wi-fi signal.THE APP SAYS MY CAMERA IS “OFFLINE”•Ensure the app is “enabled” as a “local network” in your phone’s privacysettings. (Go to “Settings”, tap“Privacy”, tap “Local Network”, andensure the toggle next to theLookCamPro app is green/enabled.) OTHER PROBLEMS•Contact our Technical Support team at 770-694-6921 or***********************29 Version 2.030 Version 2.0 Technical Support and product assembly located in the United States.Technical Support: 770-694-6921 Monday-Friday 9 AM – 6:00 PM ESTLeave Us A Review!31 Version 2.0QUALITY CONTROL CHECKLIST☐ Instruction Manual☐ BB4KWifiTwoCamSmoke☐ 2x 128GB MicroSD Cards☐ MicroSD Card ReaderQuality Control Technician:_______________________________________ Date: __________________________________32 Version 2.0Warranty number: _______________________ 33 Version 2.0。
高清网络摄像机使用说明书(2021年整理)
高清网络摄像机使用说明书(word版可编辑修改)编辑整理：尊敬的读者朋友们：这里是精品文档编辑中心，本文档内容是由我和我的同事精心编辑整理后发布的，发布之前我们对文中内容进行仔细校对，但是难免会有疏漏的地方，但是任然希望（高清网络摄像机使用说明书(word版可编辑修改)）的内容能够给您的工作和学习带来便利。
同时也真诚的希望收到您的建议和反馈，这将是我们进步的源泉，前进的动力。
本文可编辑可修改，如果觉得对您有帮助请收藏以便随时查阅，最后祝您生活愉快业绩进步，以下为高清网络摄像机使用说明书(word版可编辑修改)的全部内容。
高清网络摄像机使用手册声明本手册可能在某些技术细节方面描述不够准确或存在印刷错误，假如您在使用过程中按照使用手册无法解决问题时，请致电我公司技术部垂询相关操作方法。
本手册的内容将做不定期的更新，恕不另行通知。
1、✋远离高温的热源和环境；避免阳光直接照射;✋为确保摄像机的正常散热,应避开通风不良的场所，注意防水,防潮，防雷。
如需安装到户外，则需要安置防水箱,将摄像机固定其中；✋本机应水平安装或壁挂安装,避免安装在会剧烈震动的场所,勿将其它设备放于本机上。
2、避免电击和失火✋切记勿用湿手触摸电源和摄像机；✋勿将液体溅落在摄像机上，以免造成机器内部短路或失火；✋勿将其它设备直接放置于本摄像机上部;✋非专业人员请勿自行拆开机壳，避免损坏和电击；3、运输与搬运✋本机的包装经过抗震设计和实验，确保在运输过程中摄像机不会受到意外损坏，所以在搬运本机时，最好使用原来的包装材料和纸箱；✋避免在过冷、过热的场所间相互搬动摄像机，以免机器内部产生结露，影响机器的使用寿命;✋严禁带电搬动本机，否则会损坏主板；目录1 产品简介 (5)1。
1产品简介 (5)1.2功能简介 (5)1.3技术规格 (5)2 外观与说明 (6)3 设备与安装 (7)3。
1 运行环境 (7)3.2 设备安装 (8)4 IE 版客户端 (8)4.1 准备工作 (8)4。
腾为摄像机说明书
TEVO-V720视频会议摄像机用户手册V2.0 (中文版)目录1、安全信息 (2)2、主要功能和特性 (2)2.1 视频会议摄像机配件 (3)2.2 视频会议摄像机接口功能 (3)2.2.1 ①VISCA RS-232C IN接口标识如下图所示 (3)2.2.2 ②VISCA RS-232C OUT: 接口标识如下图所示 (4)2.2.3 ③电源接口：请使用视频会议摄像机专用电源 (5)2.2.4 ④IR: 红外接收管 (5)2.2.5 ⑤VISCA RS-422: 接口标识如下图所示 (5)2.2.6 ⑥USB：USB即插即用视频连接口 (5)2.3 视频会议摄像机云台连接方法 (5)2.3.1 通过PC与VISCA RS-232C口控制摄像机云台接法： (5)2.3.2 视频会议摄像机级联方法 (6)2.4视频会议摄像机云台功能 (6)3、视频会议摄像机拨码设定 (7)3.1地址设置拨码表 (7)3.2 红外接收地址拨码表 (8)3.3通信协议设定拨码表 (8)3.4通信方式设定拨码表 (8)4、遥控器 (8)五、技术指标 (9)1、安全信息❖在安装和使用视频会议摄像机前，请仔细阅读本说明书。
❖在运输、存储、安装及使用过程中要防止重压、剧烈震动、浸泡等对产品造成的损坏。
❖安装视频会议摄像机时，请安装于具有足够承受力的位置，对各个组件要轻拿轻放，避免用手直接触摸会议摄像机外壳，以免外壳划伤。
❖安装使用中必须严格遵守国家和地区各项电气安全标准，配用本机自带的专用电源，RS-485及视频信号在传输中应与强电设备保持足够的距离，必要时要做好防雷、防浪涌等防护措施。
❖不要在超出本产品限定的温度、湿度以及电源规格的状况下使用（详细数据请参阅会议摄像机指标）。
❖请不要擅自拆卸会议摄像机内部器件，里面无用户可自行维修的零件，本产品的安装和维修工作均应由有专业资格的人员来完成。
❖不要用化学活性强烈的或有腐蚀的洗涤剂清洗本机主体。
监控系统技术参数
第五章技术要求（1）摄像机高清红外网络球型摄像机：按现场情况实际需要，选用高清网络红外球型摄像机，该摄像机带网络模块、变焦镜头、高速预制云台、智能解码控制器、高分辨、带红外灯,确保能清晰监视各监控点图像。
高清红外网络枪型摄像机：按现场情况实际需要，选用3.3-12mm高清手动变焦镜头摄像机，支持背光补偿功能，强光抑制等功能，照射距离在30-50米之间。
（2）监控点立杆和基础要求前端监控点的立杆按实际情况而定，部分监控可以利用电力杆、墙壁等周边建筑设施；部分地方考虑单独立杆。
由于外部监控点受环境影响，立杆分球机立杆、借杆（挑杆）两种，各自要求如下：水上公园球机立杆方式：由于该区域比较广阔，立杆的要求比较高，高度要求6米左右，表面处理采用热镀锌钢管喷塑处理的方式，立杆的外型设计应和周界环境相协调。
参考图如下：借杆（壁装）：阅海湾商务区服务中心外围的两个红外枪机借助服务区墙壁安装；阅海湾商务区服务中心外围球机立杆：该区域范围较小，立杆要求相对较低，高度建议为5米，表面处理采用热镀锌钢管喷塑处理的方式，立杆的外型设计应和周界环境相协调。
球机立杆示意图水上公园6米立杆示意图，包含壁挂箱，(3)监控点机箱和基础要求前端机箱要求能放置前端光接入设备, 采用优质冷扎钢板，热镀锌喷塑。
设计为离地300 mm高度落地安装。
箱体防护等级为IP54，防雨防尘，室外安装。
在监控机箱中应设计电源保护装置，即过流过压保护装置，里面开关电源设备、防雷模块、接线端子、光纤终端盒、维修开关和插座。
为了保证设备的安全，机箱大门采用防盗锁具，具有很强的防橇性能。
(4)监控点取电监控点采用统一供电的方式，供电应稳定可靠，供电电压达到：交流AC 220V；频率范围：46HZ-60HZ；电压范围：AC170V到280V；功率要求不小于1KW（包括监控点补光功率）；全天候24小时确保前端设备的供电；要求采用室外供电电缆敷设；走地下标准强电管道；整个供电应当满足稳定可靠、扩展方便、可维护管理等特点。
USB摄像头
USB摄像头应用于Android安卓、Linux系统设备（电脑、平板、机顶盒）需要设备支持微软标准UVC万能驱动协议。
◆尺寸：长板30*25*23mm◆对焦：手动调焦◆红外夜视功能可选◆内置麦克风功能◆镜头对角/150°/100°/90°/70°/50°/40度可选◆USB线1.5米或5米可选（延长线有10米20米）◆采用台湾628+7786高端芯片，色彩逼真.◆高品质真彩色，适用拍摄范围：2cm到无穷远◆采用高品质A1全玻镜头，真实还原色彩,图像更清晰◆速率15-30fps/s压缩硬件200万，出厂默认动态分辨率：640*480（最大支持720P）◆高速USB2.0接口，全面兼容USB1.1，视频画面清晰流畅◆使用方便，即插即用，不需装驱动◆感光器件:高品质CMOS1/4英寸,超CCD感光效果,VGA/CIF格式◆信躁比：大于48dB◆压缩格式：MJPG/YUY2 （出厂前可选择）◆Video数据格式：8/16bit◆影像处理：自动曝光控制/自动增益控制/自动白平衡（可手动）/伽玛校正手动可调.◆快速压缩引擎，2至8倍压缩比◆MMX技术高速软解压，目前最高静态分辨率可达2560*1920dpi（装驱动）静态插值最高4000万◆新一代驱动，支持系统WindowsXP和最新的Vista、win7、win8系统无需驱动即插即用◆支持动态和静态图像捕捉，支持video影像录制【产品适用范围】视频会议、QQ聊天、可视电话、计算机拍照、计算机监控、录像、USB车载电脑摄像头、平板电脑、机顶盒、广告机、电梯广告机内置、电梯安全通道、 ATM柜员机摄像头、自动终端机、多煤体广告机、自助存取柜、安卓系统、Linux系统、教育机、快递机、地铁出口机等。
大华高清圈灯海螺型网络摄像机_使用说明书_V1.3.3
特别声明
产品请以实物为准，说明书仅供参考。 说明书将根据产品的变化定期更新，更新的内容将会在本手册的新版本中加入，恕不另行通知。产品
中兴k720摄像头使用说明书
中兴k720摄像头使用说明书摘要：一、产品简介二、外观与结构三、安装与调试四、功能与操作五、维护与保养六、安全与注意事项七、故障处理与售后服务正文：一、产品简介中兴K720摄像头是一款高性能的网络摄像头，适用于家庭、办公等多种场景。
本产品具有高清画质、实时监控、夜视功能等特点，为您提供便捷的监控解决方案。
二、外观与结构中兴K720摄像头外观简约时尚，采用高品质材料制造，具有良好的耐磨性和抗摔性。
结构上包括镜头、传感器、麦克风、支架和电源接口等部分。
三、安装与调试1.先将摄像头固定在所需位置，确保支架稳固。
2.连接摄像头与电源，打开摄像头电源开关。
3.下载并安装配套的监控软件，根据提示进行调试。
4.完成调试后，您可以根据需求设置录像时间、录像质量等相关参数。
四、功能与操作1.实时监控：通过监控软件，您可以随时查看摄像头拍摄的画面。
2.录像功能：根据设置的录像时间，摄像头会自动进行录像。
3.夜视功能：在光线不足的情况下，摄像头可通过红外线实现夜视监控。
4.移动侦测：当监控画面中出现移动物体时，摄像头会立即发送通知。
5.语音对讲：通过摄像头内置的麦克风和扬声器，实现双向语音沟通。
五、维护与保养1.定期检查摄像头连接线和电源线，确保连接正常。
2.保持摄像头镜头干净，以免影响画面质量。
3.避免摄像头暴露在高温、潮湿、灰尘环境中，确保使用寿命。
4.不使用时，请将摄像头置于干燥、阴凉处。
六、安全与注意事项1.安装过程中，请确保电源线布线合理，避免安全隐患。
2.调试和使用过程中，请勿触摸镜头和传感器，以免影响使用。
3.未成年人应在成人指导下使用本产品。
七、故障处理与售后服务1.如遇故障，请先查看产品说明书或联系售后客服。
2.保修期内，如有产品质量问题，请联系售后客服进行处理。
中兴K720摄像头为您提供便捷的监控体验，希望本说明书能为您提供有效的使用指导。
安克创新Anker 720P MINI DV 高清遥控器摄像机 说明书
HD 1280X720P高清遥控器摄像机说明书感谢您购买720P MINI DV，本机采用了独特的超便携式设计，使它可以应用在各个领域，为您带来方便，安全，丰富多彩的日常生活。
一． 产品特点z小巧的外形设计，对产品进行全机磨砂，时尚耐磨；配备各种便携工具z支持网络摄像头，具备网络聊天功能z支持TV OUT连接电视实时观看及录像z支持A VI的视频格式z在低照度下，可进行高清影像的录制z视频格式出厂默认为1080*720P 30帧每秒，可通过TXT文本文件更改为D1 720*480 30帧，VGA 640*480 30帧。
z高速传输的USB2.0接口z最大可支持64G的T-flash卡z内置锂电池可持续摄像达1个小时左右，待机时间达150小时二．操作指南1.充电:本机内置可充电锂电池,初次使用本机时,请先进行充电, DV可以通过以下方式充电:1), 连接电脑充电, 使用USB数据线与电脑连接, 即可充电。
2), 用充电器充电, 用USB数据线与充电器座连接, 再把充电器插上电插座，即可充电。
充电时, 红灯闪烁表示冲电, 红灯停止常亮表示冲饱。
注意: 当电池电量不足时, MINI DV 红蓝灯快闪—会直接进入保护状态, （保存文件及自动关机）录制文件已经保存，此时，请对本机进行充电。
2.开机并录像请确认已将T-F卡插入产品中！然后，短按“ON/OFF“键，红蓝色指示灯同时亮后，转蓝灯常亮本机进入待机状态。
点按“VIDEO/CAMERA”键，蓝灯闪烁一次，即连拍照1张（拍照像素为3264X2499 800万），长按“VIDEO/CAMERA”键2秒左右需看到红灯开始闪烁，既进入摄像；红灯闪烁3次灭，摄像仍在进行中（A VI录像分段保存25分钟为一个包，不循环覆盖。
每到25分钟自动生成一个A VI文件，不用按键系统支持连续录制下一个A VI文件，直到卡满或者电池用完为止。
需停录像按任意键都可停止，回到蓝灯常亮待机状态，已保存录制文件。
海康威视72071r上架指南
海康威视72071r上架指南
海康威视72071R是一款高清摄像机，下面是它的上架指南：
1.准备工作：先安装好摄像机所需的固定支架或底座，确保能
够稳固地固定摄像机。
另外，需要安装并连接好摄像机所需的电源和网络线。
2.调整摄像机角度：使用调节功能，将摄像机角度调整到需要
监控的区域，确保摄像机能够清晰捕捉到所需的画面。
3.连接电源：使用摄像机所附带的电源适配器，将其连接到摄
像机的电源接口上，并将适配器插头插入电源插座。
4.连接网络：使用摄像机所附带的网络线，将其连接到摄像机
的网络接口上，并将另一端连接到网络设备（如路由器或交换机）的可用LAN口上。
5.配置摄像机：通过电脑或手机等设备，使用海康威视的管理
软件或APP进行摄像机的配置和管理。
配置项包括网络设置、分辨率设置、录像设置等。
6.测试摄像机：完成摄像机的配置后，进行测试，确保摄像机
能够正常工作，并能够实时监控所需的画面。
7.安装配件：根据实际需要，可以安装摄像机的其他配件，如
遮阳罩、壳体，以增加摄像机的适用性和防护能力。
需要注意的是，上述步骤可能会因具体产品型号和实际情况而有所不同，建议在进行安装前仔细阅读产品说明书，并遵循厂家的指引进行操作。
此外，如果对于摄像机的安装和配置不太熟悉，建议寻求专业技术人员的帮助。
itc高清视频会议通讯摄像头tv-620hc
ITC 高清视频会议通讯摄像头(1080P) TV-620HC（18X、1080P全高清、高性能、宽视角、大变倍）（支持1080P60/50/30/25 、1080I60/50、720P60/50，SDI最高为1080P30）高清视频会议通讯摄像头产品介绍1、真正的HD高清图像：高品质HD CMOS传感器，可实现1920x1080超高分辨率的优质图像；图像效果极佳，采用1/2.8英寸，500万像素，有效像素200万像素的高品质HDCMOS 传感器，可实现1920x1080超高分辨率的优质图像。
输出帧频最高可达60/50帧/秒。
在保证高清晰度的同时，重点满足了对画面流畅性的需求2、18倍光学变焦：快速准确而稳定的自动聚焦镜头，可达到18倍光学变倍3、低噪声高信噪比：摄像机视频的信噪比直接影响到高清会议电视终端的图像压缩编码效率4、宽范围、高速度，低噪音的平移/俯仰操作：新型步进电机驱动，运行起来非常安静平稳，能快速地移动到至指定位置，并进行大范围的拍摄5、全高清的多格式视频输出：支持1080p60、1080p50、1080p30、1080p25、720p60、720p50、720p30多种高清视频制式，并在DVI-I、HDMI、HD-SDI多个接口上同时输出高清模拟和数字视频信号6、通过高清晰多媒体接口进行高质量图像传输：提供DVI-I即数字高清多媒体接口，可同时兼容模拟和数字高清视频输出，可以直接用线缆连接到高清显示设备上7、RS-232C远程控制（VISCA协议）：使用RS-232C（VISCA协议）接口，可对摄像机的所有设定以及平移/俯仰/缩放操作进行远程高速通讯控制8、位置预设位：可对多个位置进行预先设置，包括水平、俯仰、变倍进行预设，即使在摄像机掉电关闭时，预设数据也可以保存下来9、支持摄像头倒装：结构上支持摄像头倒装，并可通过串口命令设置图像水平，图像翻转命令具有掉电保存功能10、配备遥控器：配备有操作简便的遥控器，除了可进行基本设定，以及对水平、俯仰、变倍等进行控制外，还可以通过遥控器手动设定摄像头的相关参数11、OSD菜单：OSD菜单，用户可以通过OSD菜单调节摄像机曝光参数，切换视频制式，查看当前状态等输入/输出接口1、高清接口：DVI-I高清多媒体信号接口2、高清接口：HD-SDI3、控制信号接口：8芯mini DIN4、电源接口：HEC3800电源插座电气特征1、电源适配器：AC110V-AC220V转DC12V/2.5A2、输入电压：DC12V(DC11.5-DC12.5V)3、功耗：18W(最大)物理特性1、尺寸（宽高深）：265x144x171(mm)2、重量（约）：1.9Kg3、储藏温度：-10℃到+60℃4、工作温度：0℃到+45℃文案编辑词条B 添加义项?文案，原指放书的桌子，后来指在桌子上写字的人。
海康威视技术参数
海康威视产品技术参数一、网络高清摄像机1、枪机产品概述：主要特性²最高分辨率可达1280³960@ 30 fps,在该分辨率下可输出实时图像²采用ROI、SVC等视频压缩技术,压缩比高,且处理非常灵活,超低码率²码流平滑设置，适应不同场景下对图像质量、流畅性的不同要求²支持GBK字库，支持更多汉字及生僻字叠加²支持OSD颜色自选²支持Micro SD/SDHC/SDXC卡(128G)本地存储²ICR红外滤片式自动切换,实现真正的日夜监控²支持日夜两套参数独立配置²支持PoE供电功能²支持3D数字降噪,支持120dB超宽动态²支持双码流,支持手机监控²支持走廊模式,背光补偿,自动电子快门功能,适应不同监控环境²功能齐全:心跳,镜像,一键恢复等²支持智能报警：越界侦测,区域入侵侦测²支持智能后检索，配合NVR支持事件的二次检索分析²支持GB28181接入,支持EHOME平台接入,支持EZVIZ平台接入²支持NAS、Email、FTP、NTP服务器测试²支持HTTPS,SSH等安全认证，支持创建证书²支持用户登录锁定机制，及密码复杂度提示应用场景适用于金融、电信、政府、学校、机场、工厂、酒店、博物馆、交通监控等要求高清画质且光线较暗的场所，适合逆光环境主要技术参数：产品实图：半球机产品概述功能特性:•最高分辨率可达3M(2048³1536) @ 25fps,也可输出Full HD 1080p实时图像•采用先进的视频压缩技术,压缩比高,且处理非常灵活,超低码率•逐行扫描CMOS,捕捉运动图像无锯齿•采用EXIR点阵式红外灯技术,照射距离可达20-30米• ICR红外滤片式自动切换,实现真正的日夜监控•可支持PoE供电功能(选配)•支持3D数字降噪,120dB超宽动态•支持三码流,支持手机监控•符合IP67级防尘防水设计,可靠性高•支持走廊模式,背光补偿,自动电子快门功能,适应不同监控环境•支持多种智能报警功能•功能齐全:心跳,镜像,水印等•支持GB28181接入,支持EHOME平台接入,支持EZVIZ平台接入应用场景：适用于仓库、地下停车场、酒吧、管道、园区等光线较暗或无光照环境且要求高清画质的场所。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Tecohoo V-720 高清视频会议摄像机
∙产品名称：Tecohoo V-720 高清视频会议摄像机
∙产品品牌：TECOHOO
∙产品型号：Tecohoo V-720
∙产品重量：1150g/1500g(包装前后)
∙产品尺寸：240 x 145 x 95mm
∙产品简介：USB接口,免驱即插即用，全方位云台，
720P(1280*720)高清视频会议摄摄像机
Tecohoo V-720采用新型800万像素CMOS,2.5mm高清广角镜头,图像还原度高，视角更宽广（可达170度视角）,真正720P优质图像（1280*720分辨率30帧/秒）；
Tecohoo V-720采用 USB接口，无需视频采集卡，免驱动即插即用设计，可上下左右旋转，另Tecohoo V-720用高性能全焦镜头,无论您是观看30mm或是5米远的场景图像清晰，Tecohoo V-720广角视频会议摄像头都能够为您承现出最优质及高清晰画面，省去手动调焦烦琐及尴尬场面！本款产品适用于中小型会议室、个人桌面级的视频采集，适用于各种视频会议软件及QQ、MSN、SKYPE等视频通话。
Tecohoo V-720 高清视频会议摄像机是视频会议系统业界专用摄像机。
外形美观、造型别致、结构紧凑；运行平稳、无噪声、云台转速可调；定位精确、停止时无偏差抖动，可靠性高；可长期稳定运行，使用方便，无须维护。
具有多点目标预置、记忆、区域扫描、辅助开关控制、红外遥控等功能。
360°水平无限制扫描范围，兼容多种控制协议，采用标准RS422/RS232控制方式。
若想在远程控制旋转/倾斜/的运作下要获得高质量的彩色图像，Tecohoo V-720 广角视频会议摄像头无疑是及佳之选取，且封装简易、紧密。
此摄像头具有高速、在宽视场范围内旋转，倾斜运作安静。
适于用光线不好的条件下在视频会议、远距离学习、团体培训、监控、运动会、音乐会及互联网通讯的网络传播应用中。
Tecohoo V-720 是您最佳的选择。
产品参数:
∙传感器：MT9M034 有效像素130万。
(1280*720 足30
帧/秒）
∙分辨率：720P（1280x720）VGA(640x480) CIF(352x288)
∙帧率：720P:30fps
∙最低照明度：5.0 Lux @ F2.0
∙镜头：800万像素；2.5mm镜头；
∙镜头角度：170°广角
∙Focus：30mm ~ 无限大
∙曝光：自动
∙White Balance：自动/手动
∙信噪比：48dB以上
∙Interface Universal Serial Bus (USB2.0)
∙左右转动角度：(Pan) +/-180∑(0° ~ 360°)
∙上下转动角度：(Tilt) +/-60∑(0° ~ 120°)
∙Pan / Tilt 速度：120°/sec
∙电源：DC 12V
∙产品尺寸：240 x 145 x 95mm
∙产品重量：1150g/1500g(包装前后)
∙缆线长度：5米（配合“带信号放大器USB延长线”可以延长30米）。