Smart Home Introduction
LuxDomo智能家居介绍资料
功能
• 智能家居控制 • 可视对讲开门 • 信息推送（物业信息） • 电梯联动 • 视频查看（公共区域） • 紧急求助 • 户户对讲 • 安防报警
2.智能门锁
便利性(convenience)
具有自动电子感应锁定系统，他 会自动感应到门处于关闭状态时， 系统将自动上锁。智能锁可以通 过指纹，触摸屏，卡开启门锁， 实时记录开锁远程提醒。
设计设备：
1 可燃气体报警器×1
2 入侵报警器×9
3 紧急按钮×4
2
2 2
4
4
4
24
2
设计功能：实现对匪情、盗窃、火灾、煤气、紧急求助等
意外事故的自动报警。
1 2
2
2
● 智能语音控制
—— 应用区域
智能语音
应用区域： 全屋
1
设计设备： 公子小白 ×1
1
设计功能：通过小白机器人的语音交流实现室内智能设备的控制，实
• 与第三方安防设备直接接 入系统
9. 智 能 家 电
红外转换器
通过移动智能终端来控制任何使用红 外遥控器的家用设备，例如电视机、 空调器、洗衣机、电冰箱、智能窗帘 等。通过无线红外转发器，用户可用 任何手机上的智能家居应用软件对多 个电器设备进行遥控，实现集多种红 外遥控器功能于一体的目的。
10 .情 景 控 制
2、 防窥防盗，乱码开锁，防撬报警等多种智能检测 3、 情景模式，开锁后可自动激活特定的情景模式
● 智能灯光控制
—— 应用区域
灯光控制
应用区域：玄关 主卧室 卧室 餐厅 客厅 厨房 卫生间
设计设备：智能控制面板×10
1
2
3
一路控制面板×4
设计功能：1、面板控制
智能家居(English)
Will smart home replace the traditional home?Abstract:This report is aimed at finding a conclusion on whether smart home will replace the traditional home. Firstly, we make an introduction about the background of smart home. Then, we make a comparison among smart home and the traditional home through three aspects: the advantages and disadvantages of their function. And concretely analyze their differences. Finally, after the series of analysis we get the final conclusion that although there are still some problems to be solved, smart home is developing rapidly. In the future, smart home may replace the traditional home and turns into a new trend.Key word: Smart home, traditional home, replaces, marketing, Industrial Environment Contents1. Introduction (1)1.1 Smart Home (1)1.2 Categories of Smart Home (1)2. Methodology (1)3. Results (2)4. Analysis and Discussion (2)4.1 Advantages and disadvantages of smart home (2)4.2 Market Analysis (2)4.3 Industrial Environment (3)5. Conclusion (4)6. References (4)1.Introduction1.1Smart HomeSmart home is a residential platform that combines integrated wiring technology, network communication technology, security technology, automatic control technology and audio and video technology together to build effective Housing Facilities and family affairs management system. The purpose is to improve house security, convenience, comfort, artistry and archive eco-friendly living environment.The application field of smart home is wide, from switch or light bulbs to air conditioning and refrigerator. We can divide into the following three categories according to the function of home devices.1.2Categories of Smart HomeHousehold helperThe main purpose of household helper products aims at maximum convenience of home life. There are a lot of categories in this field, and the technology is relatively easy, such as smart socket with Wi-Fi and smart sweeping robot. Of course we can use our smart phone as a remote control for home devices.Home healthO bviously it’s related to our health. Compared to the previous category, it has fewer species, a higher technological content and price. Such as Smart Cup, it gives you family members reasonable daily water demand and drinking time according to the user's water intake, physical activity levels and the temperature of the user. It will record the information of user by smart phone.Home energyThe third category of smart home products aims to maximize the conservation of resources, providing healthy and efficient energy use. Compared with the previous categories, the biggest difference is that the kinds of products are rarely as a whole. They are usually pipe routing beyond we can see.2. MethodologyIn order to get a conclusion on our topic,” Will smart home replace the traditional home and turns into a new trend?”, we pretend to make an analysis on these three aspects as follows:Firstly, get more information about the present development of smart home and the traditional home. Therefore; we are able to compare their advantages and disadvantages on the influence to our daily life.Since every sword has two edges, so does the smart home. There is no doubt that smart home can bring us much convenience and comfort. Smart home makes it possible that we can just press a small button or say a simple word to control our television, electric rice cooker and so on even in a long distance. Besides, smart home products are aimed to maximize the conservation of resources, providing healthy and efficient energy use. However, in this stage of development, it has emerged some problems not to be ignored. For instance, our personal privacy is easy to leak in the home internet, which will provide opportunities to the hackers.Secondly, every industry can’t develop rapidly without market. So it is necessary to study on the consumers’demands. Are the consumers more willing to purchase the traditional home or the smart home? Why? For those customers in favor of smart home, which property do they pay more attention to? How about the distribution of these consumers?Onopposite, forthose customers in favor of traditional home, what are their demands? Through series of these investigates, we will easily find the present market and the future development trend of smart home and the traditional home.Finally, it is extremely important to compare the industry environment of them. Only having a stable macro environment tosupport, can a new industry have more space to grow up? It now appears that the industry of smart home lacks of a unified standard and its industrial chain and business model is not perfect. But varieties of people are making efforts to this new industry. On the contrary, the traditional industry has a mature business model. Then how will their respective industry environment affect them? In this aspect, does smart home have advantage to the traditional home? This report will study on this point in the following.Above all, the next step we will look for some files from the above three aspects to confirm our expected results.3. ResultsR1: Smart home is a new industrial trend. This essayaims to give a brief introduction of the field and analyzes the initial market situation.R2: In the future, smart home will take place of traditional home devices. More and more home devices will be connected to the internet and people will control their home devices easily.4.Analysis and Discussion4.1 Advantages and disadvantages of smart homeSmart home, to put it simple, is a people-centered control system which combines all the switches together in order to make it easily to control home devices. The purpose is to make our life more convenient through Science and Technology. Their advantages are as follows:1)Remote ControlJust imagine when you are in your office you can control your home devices like Water Heater, Air conditioner and so on. How amazing it is!2)WirelessControlIn the past, you can control your TV with tele-control! In the future, you can control the curtain, the light, and other devices with a tele-control only.3)Smart SecuritySmart home will offer functions like against burglar, fire alarm, gas leak alarm. These functions will give you enough security guarantees and it will work steady and highlyeffective.As every sword has two sides,there are also some disadvantages of smart home. For instance, our private life may be let out to the public and our home may suffer the attack from hackers if we connect our homedevices to the internet.4.2 Market Analysis1)Market ResearchAs the data released from the professional market analysis company Juniper shows that the global smart home market size was $33billion, 15% growth compared to 2012. At the same time, the agency predicted the scale will increase to $71 billion until 2018. If themarket keeps the growth rate, the number must be over the predicting number after 4 years.In early 2014, The International Things Trade and Application Association released the report <2013 Annual China Smart Home Industry Research Report>.It shows that, in the future 3 years, the market in China will keep increasing, the scale will turn to ￥8 billion in 2017. Also Intel gives the forecast that smart home will expand from every family to the community even to the whole city.Figure 4.1 The forecast of Smart HomeMarket in China2)Market StatusBaidu index indicates that, from 2011 to 2014, the frequency of ’smart home’ as the search keyword is up 3 times. Microsoft indicates in WinHEC conferencethat networking platform is the focus of the development of Windows10. Meanwhile smart home will be one of the service objects of the platform. Apple also released the smart home platform HomeKit in 2014. In 2015 CES conference, a lot of HomeKitdevices participated the show. And the package products arise rapidly. Google acquired the brand of smart home—Nest.Samsung released many smart devices such as smart TV, smart washer and smart lock. In addition, many Chinesecompanies also have products of smart devices including Xiaomi, Huawei, Haier and so on.3)Market FutureThere is no doubt that smart home has a bright future. The development of technology is mature while the market is in the initial state. The three major reasons of the phenomenon are as follows:Lack of unified technologystandardsHigh price of smart home devicesBad appearanceNo adequate competitionIn order to promote the process of smart home, it is necessary of our governmentto release the uniform technology standards. Our government should inspire the creative firm to develop new smart products.At the same time, single appearance design can’t meet demands of consumers any more.It is a must to design some meet individual products. Of course, this is just an issue of time.With the development of Chinese economy and promotion of people’s living standards, it is believed in the near future those cold data will turn to many sorts of smart things going to people’s daily life. The conveniences of smart home willinfluence each aspect of our life.4.3 Industrial EnvironmentThere is no doubt that home smart is not just several separate products, but a large, integrated industry. As the development of every industry can’t leave the strong support of a unified standard and its industrial chain, so does home smart.1) Standardization statusGarber Megan, a prominent commentator in the American Journal of the Atlantic, once pointed out that the most important thing for Internet of Thingsis not "Things" nor "Internet", but the "the" which exists as a standard. Therefore, the standard is the core of the whole industry chain which can pull the development of the home smart. Smart home is related to various technologies and industries, so its technology standards are involved in a wide range, such as electronics, communications, construction, home appliances and other areas.In the electronic information field, the Ministry of industry and information technology has set up the "home network standard working group", "resource sharing, collaborative service standard working group (IGRS)" and "digital TV receiving equipment and home network platform interface standardworking group”. It also proposed a total of 19 national standard projects.In the communication field, China Communications Standards Association set up a special working group of the home network, in 2006 promulgated the first batch of 2 standards. In 3GPP proposed the mobile communication standards related to the lightweight IPv6.In the construction and community information field, The National Standardization Management Committee in 2006 promulgated a series of national standards about the digital technology of the construction and residential area, including four sub standards.From these information it can be seen that although in various parts of the industry the standards are becoming more and more consummate, the whole industry still haven’t formed a integrated standard. In another word, it is hard to combine these different standards into the whole industry chain.2)The industry chain of smart home From the perspective of architecture,smart home based on the Internet of things is composed with three parts: perception, transmission and information application. Perception refers to the end of the home sensing, information collection and control, and other devices. Transmissionincludes the home network and public external network data collection and transmission. The application of information mainly refers tosmart home applying various services from service provider.As an important application of the Internet of things, smart home involves many areas and other industries with a large number of cross application. At present, the application of smart home is a vertical development. The industry's developmentcannot be interconnected, and cannot be related to the entire system architecture of the smart home.But it should be seen, smart home has been developed for many years, the business chain on all aspects, except for the business platformhave been more mature, and with their own independent standard systemalso can get profits.5. ConclusionConclusion1：Although we may be threatened by theleak of our privacy, the benefits andadvantages of smart home are still themain trend. In the future, people willuse to smart devices.Conclusion2:The technology of smart home ismature while the market just starts. Astime goes by, more and more intelligentproducts will emerge and they willbecome smarter. Meanwhile,competition will go into a new andfierce situation. Chinese companies willplay a unique role in this revolution era. Conclusion3:The smart home is a product of social productivitydevelopment, technological progress and social needs.With the improvement of people's life, the establishment of the relevant industry associations, smart home will gradually form a complete industrial chain, unified industry technical standards and norms will be further developed and perfected.Conclusion4:From the analysis of three aspects it can be concluded that although there are still some problems to be solved, smart home is developing rapidly. In the future, smart home may replace the traditional home and turns into a new trend.6. References[1]Su liguo.基于ZigBee无线传感器网络的智能家居系统.Chine Network.2012.09[2]Xuan Hang.基于物联网的智能家居监控系统的开发.2013.04[3]Ye Lingli.智能家居畅想未来不是梦.2008.11[4]Dou Qiang.智能家居发展现状研究.2012.05[5]Gao Xiaoping.中国智能家居的现状及发展趋势.2013.08[6]Tong Xiaoyu.物联网智能家居发展分析.2015.02。
英语营销策划方案范文
英语营销策划方案范文Executive SummaryThe purpose of this marketing plan is to outline the strategy and tactics for launching a new product in the market. The product being launched is a revolutionary home automation system called "SmartHome". The objective is to position SmartHome as a market leader and generate significant sales and brand awareness within the first year of launch. This plan covers the target market, competitive analysis, marketing strategies, promotional activities, and financial projections.1. Introduction1.1 Product DescriptionSmartHome is a comprehensive home automation system that allows homeowners to control and monitor various functions of their homes remotely. It includes features like lighting control, thermostat control, security system integration, and energy management. The product is designed to be user-friendly and compatible with various devices.1.2 Target MarketThe target market for SmartHome is homeowners aged 25 to 45, who are tech-savvy and value convenience and efficiency in their daily lives. They have a higher income and are willing to invest in technological advancements to enhance their lifestyle. This target market represents a large segment of the population and has a high potential for adoption of home automation systems.2. Competitive Analysis2.1 Current CompetitorsThere are several competitors in the home automation market, including well-established brands and startups. The main competitors include XYZ Home Automation, ABC Home Control, and DEF Smart Homes. These competitors offer similar products and services, but they are lacking in terms of user-friendliness and integration capabilities.2.2 Competitive AdvantageSmartHome differentiates itself from the competition by offering seamless integration with other smart devices and a user-friendly interface. Our product is designed with the latest technology and provides a superior user experience. Additionally, our extensive customer support and after-sales service will set us apart from competitors.3. Marketing Strategies3.1 Product PositioningSmartHome will position itself as a premium home automation system that offers convenience, security, and energy efficiency. We will emphasize the user-friendly interface, integration capabilities, and the ability to control the entire home remotely.3.2 Pricing StrategyThe pricing strategy for SmartHome will be a premium pricing strategy. This is to emphasize the product's value and quality. The initial price will be set at a slightly higher level compared to competitors, but justified by the additional features and superior user experience.3.3 Distribution StrategyThe distribution strategy will involve both online and offline channels. SmartHome will be available for purchase on our website, as well as through selected retail partners. We will also explore partnerships with builders and contractors to offer SmartHome as an upgrade option for new homes.3.4 Promotional StrategyThe promotional strategy will focus on creating awareness and generating interest among the target market. The marketing mix will include a mix of online and offline marketing activities, such as:- Digital Marketing: Search engine optimization (SEO), search engine marketing (SEM), social media marketing, and email marketing will be utilized to reach the target audience online.- Public Relations: Press releases, media interviews, and partnerships with influencers and bloggers in the home automation industry will be leveraged to generate media coverage.- Trade Shows and Events: SmartHome will be showcased at relevant industry trade shows and events to reach potential customers and create brand awareness.- Word of Mouth: We will encourage customer referrals by offering incentives and rewards for referring new customers to SmartHome.4. Financial ProjectionsBased on market research and competitive analysis, we anticipate achieving the following financial projections for the first year of launch:- Sales: We expect to achieve sales of $2 million in the first year.- Marketing Budget: A marketing budget of $500,000 will be allocated for the first year to support promotional activities.- Profit Margin: We estimate a profit margin of 25%.- Return on Investment (ROI): The expected ROI is projected at 200% within the first year. ConclusionThe marketing plan outlined for the launch of SmartHome aims to position the product as a market leader and achieve significant sales and brand awareness. Through a combination of strategic marketing strategies, promotional activities, and financial projections, SmartHome has the potential to succeed in the competitive home automation market.。
smart home
smart homeSmart home is the use of advanced computer technology, network communication technology, integrated wiring technology, human body engineering, incorporating personality needs, will and household life on various subsystems, such as security，lighting control, curtain control, gas valve control, information appliances, linkage, floor heating，such as organically unifies in together，through network integrated intelligent control and management，implement "people-oriented" new household life experience.Basic introductionSmart home is one of the people living environment，the platform installation for housing is intelligent household system, realize the family life safer, energy efficient, intelligent, convenient and comfortable。
To housing as a platform，the use of integrated wiring technology, network communication technology, smart home system design scheme safety technology, automatic control technology, audio and video technology to household life related facilities, schedule to build efficient residential facilities and family affairs management system, improve home security, convenience, comfort, artistry, and realize environmental protection and energy saving living environment.Also called Smart Home, usually in Smart Home abroad。
智能家居安全系统说明书
ISSN: 2454-132XImpact Factor: 6.078(Volume 7, Issue 3 - V7I3-1384)Available online at: https://IoT based smart home security systemIOT (Internet of Things) refers to the infrastructure of connected physical devices that is expanding at a fast rate as large range of devices and objects have gotten associated to the Internet. Home security may be a terribly helpful application of IOT (Internet of Things) and that we are mistreatment it to form a cheap security system for homes yet as industrial use. the protection system can utilize a microcontroller called Arduino MEGA 2560 to interface between the parts. A GSM module is employed to Convey Alert SMS for sensing Gas discharge, a water device is employed to sense the amount of water, a fireplace device is used to discover fireplace, a buzzer for sounding the alarm, the main benefits of such a system includes the ease of setting up, affordable prices and low maintenance. After activation of sensors, The Message generated by GSM module will be automatically forward to fire station, Police station and the system user. These indications will help us to decrease the damage cause and danger rate. Keywords⸻Home & Industrial system, Arduino MEGA 2560, GSM Module 800A, Fire Sensor, DHT 11, MQ 5 Sensor, Interfacing1. INTRODUCTIONWhen security mode is turned on, any recognized harmful activities that occurred at intervals the house are going to be detected through put in sensors and mechanically forward the alert message to the home-owner through the net. The main aim of this project is to observe for liquid fossil oil gas (LPG) discharge to avoid hearth accidents, providing house/industry characteristic wherever the safety has been a very important issue. The system detects the LPG discharge employing a gas detector and flames by a flame detector that alerts the buyer concerning the gas discharge by causing SMS with the assistance of GSM module that is connected preprogrammed microcontroller (Arduino Mega).When the LPG concentration within the air exceeds the sure level, the Gas detector detects the discharge and so it like a shot alert the user by causing SMS to fixed itinerant and alert the individuals reception by activating the Buzzer alarm. Home security is that the most important one for each home-owner either in a personal house or Associate in Nursing flat. To induce absolutely the peace of mind whether or not you're initially time home or out of home you want to make sure that your house is put in with the right home security observance system. This wireless home and industrial automation and security system are often wont to give security system for residential, industrial, and for all domestic and industrial functions mistreatment GSM technique. Security systems area unit sure electronic devices that area unit want to observe intrusions in home or trade. The essential parts of a home automation security system area unit motion detectors, LPG detectors and smoke detector.During this paper we have a tendency to aim to beat the failings created by several alternative security device because it is only in security purpose. It cheaper and may be maintained simply than the other security device. Security systems are around for an awfully very long time, even before the introduction of microcontrollers. Over the course of all that point, they need return quite a great distance. They need gone from being easy analog circuits with key switches and mechanical bells to being refined digital systems which will mechanically report alarms and standing info to an observance center and even provide home automation to some extent. However, several fashionable security systems have some hidden shortcomings. In this project we have a tendency to area unit providing enough security to satisfy the user’s desires. The user are going to be prompted to enter an Arcanum to unlock the door.On eminent Arcanum entry, the door unlocks for a fixed quantity of your time sanctioning him/her to store or restore his/her valuables. On the opposite hand, if the user enters Associate in Nursing invalid Arcanum then corresponding equivalent message are going to be displayed. This project “Arduino primarily based Arcanum protected lockup system” are often wont to give enough security in varied places like bank lockers, security doors. This project uses Associate in Nursing Arduino kit that consists of AT Mega 2560 that is one in every of the foremost in style microcontrollers that consists of fifty-four digital pins and sixteen analog general purpose pins, EEPROM of capability 1KB and a ram of 2KB.2. LITERATURE2.1 Sensible Home Security System:Internet of Things (IOT) conceptualizes the thought of remotely connecting and observation real world objects (things). Once it involves our house, this idea is often with competence incorporated to create it smarter, safer and automatic. This IOT project focuses on building a smart wireless home security system that sends alerts to the owner and fireplace stations by using GSM Module just in case of associate degree trespass and raises an alarm optionally. Besides, the same may also be utilized for home automation by creating use of a similar set of sensors. The leverage obtained by preferring this method over the similar sorts of existing systems is that the alerts and also the standing sent by the GSM connected microcontroller managed system can be received by the user on his phone. In this project we tend to area unit providing enough security to satisfy the us er’s wants.The main perform of gas run detection module that consists of the gas detector to continuously find the gas run within the air. Here for the gas run detection, a solid-state gas detector MQ-5 is employed. Once the LPG gas or flammable gases gift within the environment the resistance of the detector changes with the concentration of flammable gases. The conduction of gas detector will increase and whose conduction is a smaller amount within the air. A simple electronic circuit are often wont to convert the amendment in resistance to vary in terms of concentration of explosive gases. If thanks to gas run, any fireplace accident occurred, Then the flame detector can send associate degree tuned in to the microcontroller which info conjointly send to the user through GSM module. Any range of client mobile numbers area unit enclosed while programming the microcontroller in embedded C language, to that SMS should be sent concerning the gas run and fireplace accident details. This wireless GSM module is employed to alert the buyer even once they area unit removed from home. Associate degree audio and visual show alarm provided to right away alert the folk’s reception in associate degree abnormality. Various management systems are designed over the years to stop access to unauthorized user. The most aim for providing locks for our home, school, office, and building is for security of our lives and property. It’s so necessary to possess convenient manner of achieving this goal. Automatic door system became a regular feature on several different types of buildings and houses. And that they are getting widespread each day to develop an effective electronic device which give security. Home security has been a significant issue because of the rise in rate and everyone needs to require correct action to stop Unauthorized user. There was a necessity to alter home in order that user will profit of the GSM technology and laptop system. Literature survey is distributed to realize info and information. Before beginning with the analysis and style of project, we tend to referred several analysis papers, manuals, documents related to the construct of project.2.2 ApplicationsThe Home and trade Safety exploitation fireplace and Gas Detection exploitation GSM system is employed to detect any fireplace, smoke or gas run in any premises, building or trade. It’s used for detecting any run of gas or smoke thanks to fireplace or a ny chemical change. Here a number of the Real-time applications area unit given below.•This project is employed as a security system in applications like homes, Hospitals, Hostels, industries. thanks to its low power consumption, dependableness, movability this method employed in other applications like smoke detection.•It's terribly helpful in-house for detection LPG gas, which may cause vast loss of Property and life.2.3 Advantages•Sensitive and fast response•Reliable stability and long life•This easy circuit are often used at residential places to confirm higher safety.•It is often used at organizations to confirm approved access to extremely secured places.3. HARDWARE AND SOFTWARE COMPONENTS3.1 Arduino Mega 2560Fig. 1: Arduino Mega 2560Variety of microprocessors and controllers square measure utilized in the look of Arduino. Digital and analog input/output (I/O) pins square measure equipped in boards that will be interfaced to varied enlargement boards and alternative circuits. Serial communications interfaces may be a feature during this board, as well as Universal Serial Bus (USB) on some models that are usedfor loading programs from personal computers. The microcontroller’s square measure programmed exploitation options from the programming languages C and C++.3.2 GSM Module 800AFig. 2: GSM Module 800ASIM800A could be a complete Quad-band GSM/GPRS resolution during a LGA kind which might be embedded within the client applications. SIM800A support Quad-band 850/900/1800/1900MHz, it will transmit Voice, SMS and knowledge info with low power consumption. With small size of fifteen.8*17.8*2.4 mm, it will work into slim and compact demands of client style. That includes and Embedded AT, it permits total price savings and fasttimeto-market for client applications.3.3 Fire SensorFig. 3: Fire SensorA Fire detector may be a detector designed to discover and reply to the presence of a flame or fireplace. These forms of sensors square measure used for brief vary fireplace detection and might be used to monitor comes or as a security precaution to chop devices on/off. The flame detector is incredibly sensitive to IR wavelength at 760 nm ~ 1100 nm lightweight. The range of these detector is generally correct up to 3Feet.3.4 Gas Sensor (MQ5)Fig. 4: Gas Sensor (MQ5)Gas Sensor (MQ5) module is beneficial for gas escape detection (in home and industry). It is suitable for sleuthing H2, LPG, CH4, CO, Alcohol. Thanks to its high sensitivity and quick response time, measurements will be taken as shortly as doable. The sensitivity of the sensing element can be adjusted by victimization the potentiometer.4. CONCLUSIONConclusion heading should have the correct numbering as per the number of heading above the conclusion. This is also a paragraph so all font styling described above for a paragraph will be applicable here. The sensible Home Security System integrates devices like Gas detector, hearth detector, Water Level detector, Temperature & wetness detector and Door protection system. During this system we tend to are planning to management door lock & monitor the Gas leak, observe hearth, to observe the water available within the storage tank. The door protection system is enclosed to supply security to homes, it is often controlled employing a data input device and servo motor.Security by the higher than enhancements so as to utterly satisfy user’s wants. Hence, a common man will afford to buy such protection system in lowest value to stay his valuables safely with none worries. The main advantage of this easy gas leak detector is its simplicity and its ability to warn its stakeholders concerning the leak of the LPG gas. This detector is enforced with success and is simple to use and additionally an occasional value product. Another advantage of this device is that even though if nobody is there within the house so gas leaks happens, GSM module is there to send immediate messages to the stakeholders concerning the gas leak and therefore it lowers the intensity of accidents.GSM module during this device ensures higher safety concerning the gas leaks. This system is often of nice in domestic furthermore as industrial settings to observe smoke and alert individuals on an close hearth since smoke may be a precursor for hearth, rather than counting on heat/temperature sensors that sounds alarm once the hearth has already started. This will go a long method in serving to save lots of human life. This technique may be accustomed observe and deter smokers in areas wherever smoking is prohibited. The price of implementing this technique is relatively low since the parts used area unit comparatively low-cost and area unit simply obtainable within the market.5. ACKNOWLEDGEMENT“IOT BASED SMART HOME SECURITY SYSTEM” We take this opportunity to express our deep sense of gratitude & whole hearted thanks to our revered guide MR. Mahesh Panjwani, Lecturer, Department of Computer Technology, Priyadarshini College of Engineering, Nagpur for his valuable guidance, inspiration and encouragement that has led to successful completion of this work. We would like to express our deepest gratitude to MRS. Nita Thakre, Head, Department of Computer Technology, Priyadarshini College of Engineering, Nagpur for making all facilities available in the department those were necessary for the completion of this work. A special word of thanks goes to Entire Department of Computer Technology, Priyadarshini College of Engineering, Nagpur for their encouragement and their cooperation to accomplish our work on time. We would also express our heartfelt thanks and sense of gratitude to Dr. M.P.Singh, Principal, Priyadarshini College of Engineering, Nagpur for being a constant source of inspiration. PROJECTEES: Sunny Fofse, Sudhanshu Raut, Atharva Hawale, Titesh Aglawe, Suraj Deshkar.6. REFERENCES[1]Getting started with Arduino-by Massimo Banzi[2]Getting started with Arduino-by Massimo Banzi[3]Beginning Arduino –by Michael McRoberts[4]Associate Editor, Sensor Review –by Rob Bogue[5]Sensor Technology –by John Wison 2008[6]https:///interfacing-mq5-lpg-sensor-to-arduino[7]https:///Grove-Gas_Sensor-MQ5/[8]https:///usa/mega-2560-r3[9]https:///arduino-flame-sensor-interface/。
智能家居室内感应定位系统中英文对照外文翻译文献
智能家居室内感应定位系统中英文对照外文翻译文献(文档含英文原文和中文翻译)A Pyroelectric Infrared Sensor-based Indoor Location-AwareSystem for the Smart HomeSuk Lee, Member, IEEE, Kyoung Nam Ha, Kyung Chang Lee, Member, IEEE Abstract —Smart home is expected to offer various intelligent services by recognizing residents along with their life style and feelings. One of the key issues for realizing the smart home is how to detect the locations of residents. Currently, the research effort is focused on two approaches: terminal-based and non-terminal-based methods. The terminal -based method employs a type of device that should be carried by the resident while the non-terminal-based method requires no such device. This paper presents a novel non-terminal-based approach usingan array of pyroelectric infrared sensors (PIR sensors) that can detect residents. The feasibility of the system is evaluated experimentally on a test bedIndex Terms— smart home, location-based service, pyroelectric infrared sensor (PIR sensor), location-recognition algorithmI. INTRODUCTIONThere is a growing interest in smart home as a way to offer a convenient, comfortable, and safe residential environment [1], [2]. In general, the smart home aims to offer appropriate intelligent services to actively assist i n the resident’s life such as housework, amusement, rest, and sleep. Hence, in order to enhance the resident’s convenience and safety, devices such as home appliances, multimedia appliances, and internet appliances should be connected via a home network system, as shown in Fig. 1, and they should be controlled or monitored remotely using a television (TV) or personal digital assistant (PDA) [3], [4].Fig. 1. Architecture of the home network system for smart home Especially, attention has been focused on location-based services as a way to offer high-quality intelligent services, while considering human factors such as pattern of living, health, and feelings of a resident [5]-[7]. That is, if the smart home can recognize the resident’s pattern of living o r health, then home appliances should be able to anticipate the resident’s needs and offer appropriate intelligent service more actively. For example, in a passive service environment, the resident controls the operation of the HVAC (heating, ventilating, and air conditioning) system, while the smart home would control the temperature and humidity of a room according to the resident’s condition. Various indoor location-aware systems have beendeveloped to recognize the resident’s location in the smart home or smart office. In general, indoor location-aware systems have been classified into three types according to the measurement technology: triangulation, scene analysis, and proximity methods [8]. The triangulation method uses multiple distances from multiple known points. Examples include Active Badges [9], Active Bats [10], and Easy Living [11], which use infrared sensors, ultrasonic sensors, and vision sensors, respectively. The scene analysis method examines a view from a particular vantage point. Representative examples of the scene analysis method are MotionStar [12], which uses a DC magnetic tracker, and RADAR [13], which uses IEEE 802.11 wireless local area network (LAN). Finally, the proximity method measures nearness to a known set of points. An example of the proximity method is Smart Floor [14], which uses pressure sensors. Alternatively, indoor location-aware systems can be classified according to the need for a terminal that should be carried by the resident. Terminal-based methods, such as Active Bats, do not recognize the resident’s location directly, but perceive the location of a device carried by the resident, such as an infrared transceiver or radio frequency identification (RFID) tag. Therefore, it is impossible to recognize the resident’s location if he or she is not carrying the device. In contrast, non-terminal methods such as Easy Living and Smart Floor can find the resident’s location without such devices. However, Easy Living can be regarded to invade the resident’s privacy while the Smart Floor has difficulty with extendibility and maintenance. This paper presents a non-terminal based location-aware system that uses an array of pyroelectric infrared (PIR) sensors [15], [16]. The PIR sensors on the ceiling detect the presence of a resident and are laid out so that detection areas of adjacent sensors overlap. By combining the outputs of multiple PIR sensors, the system is able to locate a resident with a reasonable degree of accuracy. This system has inherent advantage of non-terminal based methods while avoiding privacy and extendibility, maintenance issues. In order to demonstrate its efficacy, an experimental test bed has been constructed, and the proposed system has been evaluated experimentally under various experimental conditions. This paper is organized into four sections, including this introduction. Section II presents the architecture of the PIR sensor-based indoor location-aware system (PILAS), and the location-recognition algorithm. Section III describes a resident-detection method using PIR sensors, and evaluates the performance of the system under various conditions using an experimental test bed. Finally, a summary and the conclusions are presented in Section IV.II. ARCHITECTURE OF THE PIR SENSOR-BASED INDOORLOCATION-AWARE SYSTEMA. Framework of the smart homeGiven the indoor environment of the smart home, an indoor location-aware system must satisfy the following requirements. First, the location-aware system should be implemented at a relatively low cost because many sensors have to be installed in rooms of different sizes to detect the resident in the smart home. Second, sensor installation must be flexible because the shape of each room is different and there are obstacles such as home appliances and furniture, which prevent the normal operation of sensors. The third requirement is that the sensors for the location-aware system have to be robust to noise, and should not be affected by their surroundings. This is because the smart home can make use of various wireless communication methods such as wireless LAN or radio-frequency (RF) systems, which produce electromagnetic noise, or there may be significant changes in light or temperature that can affect sensor performance. Finally, it is desirable that the system’s accuracy is adjustable according to room types.Among many systems that satisfy the requirement, the PIR sensor-based system has not attracted much attention even though the system has several advantages. The PIR sensors,which have been used to turn on a light when it detects human movement, are less expensive than many other sensors. In addition, because PIR sensors detect the infrared wavelengthemitted from humans between 9.4~10.4 μm, they are reasonably robust to their surroundings, in terms of temperature, humidity, and electromagnetic noise. Moreover, it ispossible to control the location accuracy of the system by adjusting the sensing radius of a PIR sensor, and PIR sensors are easily installed on the ceiling, where they are not affected by the structure of a room or any obstacles.Figure 2 shows the framework for the PILAS in a smart home that offers location-based intelligent services to a resident. Within this framework, various devices are connected via a home network system, including PIR sensors, room terminals, a smart home server, and home appliances. Here, each room is regarded as a cell, and the appropriate number of PIR sensors is installed on the ceiling of each cell to provide sufficient location accuracy for the location-based services. Each PIR sensor attempts to detect the resident at a constant period, and transmits its sensing information to a room terminal via the home network system.Fig. 2. Framework of smart home for the PILAS.Consequently, the room terminal recognizes the resident’s l ocation by integrating the sensor information received from all of the sensors belonging to one cell, and transmits the resident’s location to the smart home server that controls the home appliances to offer location-based intelligent services to the resident.Within this framework, the smart home server has the following functions. 1) The virtual map generator makes a virtual map of the smart home (generating a virtual map), and writes the location information of the resident, which is received from a room terminal, on the virtual map (writing the resident’s location). Then, it makes a moving trajectory of the resident by connecting the successive locations of the resident (tracking the resident’s movement). 2) The home appliance controller transmits control commands to home appliances via the home network system to provide intelligent services to the resident. 3) The moving pattern predictor saves the current movement trajectory of the resident, the current action of home appliances, and parameters reflecting the current home environment such as the time, temperature, humidity, and illumination. After storing sufficient information, it may be possible to offer human-oriented intelligent services in which the home appliances spontaneously provide services to satisfy human needs. For example, if the smart home server “knows” that the resident normally wakes up at 7:00 A.M. and takes a shower, it may be possible to turn on the lamps and some music. In addition, the temperature of the shower water can be set automatically for the resident.B. Location-recognition algorithmIn order to determine the location of a resident within a room, an array of PIR sensors are used as shown in Fig. 3. In the figure, the sensing area of each PIR sensor is shown as a circle, and the sensing areas of two or more sensors overlap. Consequently, when a resident enters one of the sensing areas, the system decides whether he/she belongs to any sensing area by integrating the sensing information collected from all of the PIR sensors in the room. For example, when a resident enters the sensing area B, sensors a and b output ‘ON’ signals, while sensor c outputs ‘OFF’ signal. After collecting outputs, the algorithm can infer that the resident belongs to the sensing area B. According to the number of sensors and the arrangement of the sensors signaling ‘ON’, the resident’s location is deter-mined in the following manner. First, if only one sensor outputs ‘ON’ signal, the resident is regarded to be at the center of the sensing area of the corre sponding sensor. If the outputs of two adjacent sensors are ‘ON’, the resident’s location is assumed to be at the point midway between the two sensors. Finally, if three or more sensors signal ‘ON’, the resident is located at the centroid of the centers of the corresponding sensors. For example, it is assumed that the resident is located at point 1 in the figure when only sensor a signals ‘ON’, while the resident is located at point 2 when sensors a and b both output ‘ON’ signals.The location accuracy of this system can be defined the maximum distance between the estimated points and the resident. For example, when a resident enters sensing area A, the resident is assumed to be at point 1. On the assumption that a resident can be represented by a point and the radius of the sensing area of a PIR sensor is 1 m, we know that the location accuracy is 1 m because the maximum error occurs when the resident is on the boundary of sensing area A. Alternatively, when the resident is in sensing area B, the resident is assumed to be at point 2, and the maximum location error occurs when the resident is actually at point 3. In this case, the error is 3 / 2 m which is the distance between points 2 and 3. Therefore, the location accuracy of the total system shown in Fig. 3 can be regarded as 1 m, which is the maximum value of the location accuracy of each area. Since the number of sensors and the size of their sensing areas determine the location accuracy of the PILAS, it is necessary to arrange the PIR sensors properly to guarantee the specified system accuracy.Fig. 3. The location-recognition algorithm for PIR sensors.In order to determine the resident’s location precisely and increase the accuracy of the system, it is desirable to have more sensing areas with given number of sensors and to have sensing areas of similar size. Fig. 4 shows some examples of sensor arrangements and sensing areas. Fig. 4(a) and 4(b) show the arrangements with nine sensors that produce 40 and 21 sensing areas, respectively. The arrangement in Fig. 4(a) is better than Fig. 4(b) in terms if the number of sensing areas. However, the arrangement in Fig. 4(a) has some areas where a resident can not be detected and lower location accuracy than that in Fig. 4(b). Fig. 4(c) shows an arrangement with twelve sensors that five 28 sensing areas without any blind spots.Fig. 4. Location accuracy according to the sensor arrangement of PIRsensors. (a) 40 sensing areas. (b) 21 sensing areas. (c) 28 sensing areaswith twelve sensors.When PIR sensors are installed around the edge of a room, as shown in Fig. 4(c), it sometimes may give awkward results. One example is shown in Fig. 5. Fig. 5(a) shows the path of a resident. If we mark the estimated points by using the sensor location or the midpoint of adjacent sensors, it will be a zigzagging patterns as shown in Fig. 5(b). In order to alleviate this, we may regard the sensors on the edges to be located a little inwards, which give the result shown in Fig. 5(c).Fig. 5. The effect of compensating for the center point of the outer sensors.(a) Resident’s movement. (b) Before compensating for the outer sensors. (c)After compensating for the outer sensors.III. PERFORMANCE EVALUATION OF THE PILASA. Resident-detection method using PIR sensorsSince the PILAS recognizes the resident’s location by combining outputs from all the sensors belonging to one cell, determining whether a single sensor is ‘ON’ or ‘OFF’ directly influences location accuracy. In general, because the ‘ON/OFF’ values can be determined by co mparing a predefined threshold and the digitized sensor output acquired by sampling the analog signal from a PIR sensor, it is necessary to choose an appropriate signal level for the threshold. For example, Smart Floor, which is another non-terminal method, can recognize a resident’s location exactly by comparing the appropriate threshold and a sensor value, because a pressure sensor outputs a constant voltage based on the resident’s weight when he remains at a specific point. However, because a PIR sensor measures the variation in the infrared signal produced by a moving human body, its output is in analog form, as shown in Fig. 6. That is, as the variation in the infraredradiation from a resident increases when a resident enters a sensing area, the PIR sensor outputs an increasing voltage. Conversely, the voltage decreases as the resident leave the sensing area. If the resident does not move within the sensing area, the variation in the infrared radiation does not exist and the PIR sensor outputs zero voltage. Therefore, it is very difficult to deter-mine when a resident is staying resident within a specific sensing area using only the voltage or current threshold of a PIR sensor.Fig. 6. Signal output of PIR sensor.In order to guarantee the location accuracy of the system, the resident-detection method must meet several requirements. First, if no resident is present within a sensing area, the PIR sensor should not output ‘ON’ signal. That is, the PIR sensor must not malfunction by other disturbances such as a moving pet, temperature change and sunlight. Second, it should be possible to precisely determine the point in time when a resident enters and leaves a sensing area. That is, in spite of variations in sensor characteristics, resident’s speed and heig ht, it should be possible to determine the time point exactly. Finally, because the output voltage of a PIR sensor does not exceed the threshold voltage when the resident does not move within a sensing area, it is necessary to know if a resident stays within the sensing area.In order to satisfy these requirements, this paper introduces the following implementation method for the resident detection method for PIR sensors. First, in order to eliminate PIR sensor malfunctioning due to pets or temperature changes, a Fresnel lens, which allows human infrared waveforms to pass through it while rejecting other waveforms, is installed in front of the PIR sensors. Second, when the output of a PIR sensor exceeds the positive threshold voltage, and this state is maintained for several predefined sampling intervals, that the resident has entered a sensing area. Here, the threshold must be sufficient for the method to distinguish variation in the resident’s infrared from an environmental infrared signal caused by pets o r temperature change. Moreover, when the sensor’s output falls below a negative threshold voltage and this status is maintained for several sampling intervals, it is assumed that the resident has left the sensing area. Finally, when the output voltage remains between the two threshold voltages, for example when the resident is not moving inside the sensing area, the output of the corresponding PIR sensor is changed from ‘ON’ to ‘OFF’. At this time, if other sensors installed near this sensor do notoutput ‘ON’ signal, the method regards the resident as remaining within the corresponding sensing area.B. Performance evaluation using an experimental test bedIn order to verify the feasibility of the PILAS, an experimental test bed was implemented. Since the intelligent location-based service in the smart home does not require very high location accuracy, we designed the system to have a location accuracy of 0.5 m. Figure 7 shows the experimental test bed in a room measuring 4 ×4 ×2.5 m (width ×length ×height). In the experiment, twelve PIR sensors were fixed on the ceiling, using the arrangement shown in Fig. 4(c). An Atmel AT89C51CC001 microcontroller [17] was used for signal processing and judging ‘ON/OFF’, and a Nippon Ceramic RE431B PIR sensor [18] and N L-11 Fresnel lens were used. Especially, a horn was installed on each PIR sensor to limit the sensing area to the circle with 2 m diameter. Fig. 8 shows the experimental results with the horn. In the figure, the RE431B sensor outputs the signal shown in (a) when a resident passes through the sensing circle, while it outputs the irregular signal shown in (b) when the resident moves within the circle. Finally, no signal is detected when the resident moves outside the circle, as shown in (c). From these experimental results, we verified that the PIR sensor detects residents within the sensing area only. In addition, in order to judge whether the signal is ‘ON’ or ‘OFF’, it is necessary to choose a threshold for the RE431B sensor that considers external environmental disturbance. Initially, several experiments were performed to determine the threshold with respect to the internal temperature change caused by a air conditioner or heater and other disturbances, such as wind or sunshine. Based on these experimental results, when the threshold of the RE431B sensor was ±0.4 V, external environmental temperature change did not affect its performance at detecting the resident. In addition, we verified that pets did not affect the sensing performance with the same threshold.Fig. 7. Experimental test bed for the PILAS.Fig. 8. Ensuring the exact sensing range with a horn.Next, in order to determine the resident’s location using the information received from PIR sensors, a PC-based locationrecognition algorithm was implemented, as shown in Fig. 9. Here, a PC collects data from the PIR sensors every 10 msec using an NI 6025E data acquisition (DAQ) board [19]. In the figure, the line in the left window was drawn using a mouse to show the path of the resident graphically, while that in the window on the right is the estimated movement trajectory of the resident drawn by connecting the resident’s locations acquired using the DAQ board.Finally, in order to verify the efficacy of the system, three experiments were performed with residents between 160 and 180 cm tall, moving at speeds between 1.5 and 2.5 km/h. Figure 9 shows the trajectory of a resident moving along a Tshaped path. The trajectory made by connecting the resi-dent’s locations recognized by the PILAS, shown on th e right, was similar to the target path shown on the left. We know that the maximum location error is about 30 cm without compensating for the outer sensors. Fig. 10 shows the trajectory when the resident follows an H-shaped path. In this experiment, the location accuracy was similar to that in Fig. 9. We verified that the system could locate a resident with accuracy of 0.5 m, even if three or more sensors were activated. Figure 11 shows the trajectory of a resident moving along a square path. In this case, the location error is the largest, and the trajectory is not a straight line. We note that serious location errors occurred at each point marked by A due to the inaccurate judgment of the outer sensors. Nevertheless, the location error is still smaller than 0.5 m when moving in the square path. Here, the compensation method for outer sensors, which was explained in Fig. 5, reduces the location error at each point A. When the resident moves in a straight line, as shown in Fig. 12(a), the location error is relatively large without using the compensation method, as shown in Fig. 12(b). However, after applying the compensation method, we verified that the detection results for the areas in the small circles are enhanced by roughly about 30%.IV. SUMMARY AND CONCLUSIONSThis paper presents a PIR sensor-based indoor location aware system that estimates the resident’s location for location-based intelligent services in the smart home. This paper introduces the framework of smart home for the location-aware system, and a location-recognition algorithm that integrates the information collected from PIR sensors. In addition, this paper presents a resident-detection method. Finally, an experiment is implemented to evaluate the efficacy of the PILAS.Based on several experiments conducted under various conditions, we verified that the PILAS can estimates resident’s location sufficiently well. Moreover, because the location accuracy of the system is less than 0.5 m without any terminal for location recognition, the system can be very practical. Furthermore, it should be possible to enhance the location accuracy of the system by increasing the number of sensing areas, by equalizing the sensing areas based on the sensor arrangement, or by compensating for the centers of outer sensors.Since the location accuracy of this system differs according to the sensor arrangement, it is necessary to determine the optimal sensor arrangement that offers the greatest location accuracy. In order to enhance the location accuracy, it is also necessary to enhance the method of processing the PIR sensors using more advanced techniques such as probabilistic theories and soft computing. Finally, the proposed PILA system should be extended to deal with a room occupied by more than one residents.基于热释电红外传感器的智能家居室内感应定位系统Suk Lee，电机及电子学工程师联合会会员Kyoung Nam Ha, Kyung Chang Lee,电机及电子学工程师联合会会员摘要——智能家居，是一种可以通过识别具有不同生活习惯和感觉的住户来提供各种不同的智能服务。
智能锁介绍作文英语
智能锁介绍作文英语Title: Introduction to Smart Locks。
In today's rapidly advancing technological landscape, smart locks have emerged as innovative solutions to traditional security concerns. These sophisticated devices offer convenience, enhanced security features, and seamless integration with smart home ecosystems. In this essay, we will delve into the features, benefits, and implications of smart locks.First and foremost, smart locks revolutionize the way we secure our homes and properties. Unlike traditional locks that rely on physical keys, smart locks utilize cutting-edge technology such as biometric authentication, keypad entry, and remote access via smartphone apps. This means that homeowners can unlock their doors with a fingerprint scan, a personalized PIN code, or even remotely grant access to guests or service providers, all with the tap of a screen.One of the primary advantages of smart locks is the heightened level of security they offer. Many smart lock models boast advanced encryption protocols and tamper detection mechanisms, making them highly resistant to hacking or lock-picking attempts. Moreover, the ability to receive real-time notifications on smartphone devices ensures that homeowners are promptly alerted to any unauthorized entry attempts, allowing for swift action to be taken.Furthermore, smart locks enhance convenience and flexibility in everyday life. Imagine never having to worry about forgetting your keys again or fumbling with a bulky keychain in the dark. With smart locks, you can unlock your door with a simple voice command or by tapping a button on your smartphone, providing unparalleled ease of access. Additionally, the ability to create temporary access codes for guests, housekeepers, or delivery personnel means you can grant entry to others without having to be physically present.Another noteworthy feature of smart locks is their seamless integration with smart home systems. By connecting to Wi-Fi networks or smart home hubs, smart locks can be integrated into broader home automation setups, allowingfor enhanced functionality and control. For example, you can program your smart lock to automatically lock or unlock at specific times of the day, integrate it with other smart devices such as security cameras or lights, or even receive notifications when family members arrive home.In addition to their practical benefits, smart locks also have broader implications for security and privacy. As with any internet-connected device, there are concerns about data privacy and potential vulnerabilities. Manufacturers must prioritize robust security measures and regular software updates to mitigate these risks and ensure the integrity of their products. Furthermore, users must remain vigilant about implementing best practices for securing their smart home devices, such as using strong, unique passwords and regularly updating firmware.In conclusion, smart locks represent a significantadvancement in home security technology, offering a combination of convenience, enhanced security, and seamless integration with smart home ecosystems. While they may not entirely replace traditional locks, their adoption is steadily increasing as homeowners seek to embrace the benefits of connected living. As technology continues to evolve, it is essential to strike a balance between innovation and security to ensure that our homes remain safe and protected in the digital age.。
小学生智能家居英语作文
小学生智能家居英语作文【英文版】Title: Smart Homes for Little Minds: An IntroductionHello, my little smart home! I'm writing to introduce you to a wonderful world of technology and convenience that awaits you - the smart home. Whether you're a first-grader learning about science or a busy parent looking for ways to simplify life, this article is for you.What is a smart home, you may ask? Well, it's a home that's been equipped with advanced technology to make your life easier. Think of it as a combination of gadgets, sensors, and artificial intelligence that work together to automate tasks like managing the lighting, temperature, and even security.Now, let's take a look at some of the exciting features you can find in a smart home:1. Voice Control: With voice control technology, you can simply use your voice to control your home's lighting, thermostat, and more. No more fumbling with buttons or remotes.2. Automated Scheduling: Set your home to automatically adjust the lighting, music, and temperature based on your schedule and preferences.3. Security Features: Smart home systems can integrate with security cameras and sensors to keep you safe and informed at all times.4. Connectivity: With smart home devices able to connect to one another via Wi-Fi or Bluetooth, you can easily control your home from anywhere using your smartphone or tablet.Now that you have an idea of what a smart home is and what it can do, let's take a look at some of the best-selling smart home products for kids and families:1. Smart Light Bulbs: These energy-efficient bulbs can be controlled via your smartphone or voice control system, allowing you to adjust brightness, color temperature, and even create a mood with special effects.2. Smart Thermostats: These devices can be set to automatically adjust temperature based on your schedule and energy usage. You can also integrate with other smart home devices to create a more energy-efficient home.3. Security Cameras: These cameras can be installed in high-traffic areas or outside your home to keep an eye on things from anywhere in the world using your smartphone or tablet.4. Learning Robots: These robots can be used for teaching basic science concepts, language skills, and more while providinginteractive experiences that are fun for kids.Now that you've learned about smart homes and some of the best-selling products, what are you waiting for? Explore the world of technology and convenience with your little mind!【中文版】亲爱的智能家居，你好！我在这里向你介绍一个充满科技与便利的世界——智能家居。
小学生智能家居英语作文
小学生智能家居英语作文English:In recent years, the concept of smart homes has become increasingly popular among people. As technology continues to advance, more and more smart devices are being integrated into our daily lives. This trend has also extended to the education sector, with the introduction of smart homes specifically designed for elementary school students.Smart homes for elementary school students aim to provide a safe, interactive, and educational environment for children. One of the key features of these smart homes is the incorporation of voice-activated assistants, such as Siri or Alexa. These assistants not only respond to children's questions and commands, but also provide them with educational content tailored to their age and interests. For example, when a child asks a question about a particular topic, the assistant can provide comprehensive information and even engage in interactive conversations to enhance the learning experience.Furthermore, smart homes for elementary school students also include smart learning tools. These tools are designed to make learning more engaging and interactive. For instance, interactive whiteboards can be connected to the internet, allowing students to access a wide range of educational resources, participate in virtual field trips, and collaborate with their peers on projects. Additionally, smart home devices can also provide personalized study plans and track the progress of individual students, providing feedback and suggestions for improvement.Moreover, smart homes for elementary school students promote a safe and secure environment. With features like facial recognition technology and fingerprint authentication, only authorized individuals can access the smart home. Parents can also monitor their children's activities remotely through their smartphones or other devices, ensuring their safety and well-being. In case of emergencies, the smart home can alert both parents and relevant authorities, guaranteeing quick response and assistance.In conclusion, smart homes for elementary school students offer a variety of benefits by integrating technology into the learningprocess. They provide a safe environment, personalized learning experiences, and interactive tools, ultimately enhancing children's education and making learning more enjoyable.中文翻译：近年来，智能家居的概念在人们之间越来越受欢迎。
身边的智能介绍英语作文
身边的智能介绍英语作文全文共3篇示例，供读者参考篇1Introduction to Smart Devices around usIn today's modern society, smart devices have become an essential part of our daily lives. From smartphones to smart home appliances, these intelligent gadgets have greatly improved our quality of life by providing convenience, efficiency, and entertainment. In this article, we will explore some of the most common smart devices that are commonly found around us.1. SmartphonesSmartphones are perhaps the most ubiquitous smart devices in today's society. They not only serve as a communication tool, but also as a personal assistant, entertainment device, and even a fitness tracker. With features such as voice recognition, GPS, and a wide array of apps, smartphones have revolutionized the way we interact with the world around us.2. Smart Home AppliancesSmart home appliances include devices such as smart thermostats, smart lights, and smart security cameras. These devices can be controlled remotely via a smartphone or voice commands, allowing users to easily adjust settings, monitor energy usage, and enhance home security. With the rise of smart home technology, we can now create a more efficient and comfortable living environment.3. Smart WatchesSmart watches are wearable devices that offer a range of functions beyond simply telling time. They can track fitness metrics, receive notifications from your smartphone, and even make payments with built-in NFC technology. With a smart watch on your wrist, you can stay connected and organized without having to constantly check your smartphone.4. Smart SpeakersSmart speakers, such as Amazon Echo and Google Home, have gained popularity in recent years for their voice-controlled assistants, such as Alexa and Google Assistant. These devices can answer questions, play music, control smart home devices, and much more. With their hands-free operation, smart speakers have become a convenient way to access information and entertainment in our daily lives.5. Smart TVsSmart TVs combine the features of a traditional television with internet connectivity, allowing users to stream content from apps such as Netflix, Hulu, and YouTube. With a smart TV, you can access a wide range of entertainment options and customize your viewing experience to suit your preferences. Smart TVs have revolutionized the way we consume media in our homes.In conclusion, smart devices have become an integral part of our daily lives, offering convenience, efficiency, and entertainment in various forms. Whether it's a smartphone, smart home appliance, smart watch, smart speaker, or smart TV, these intelligent gadgets have greatly improved our quality of life. As technology continues to advance, we can expect to see even more innovative smart devices that will further enhance our daily experiences.篇2Title: Introducing the Smart Devices Around UsIn this modern era, smart devices have become an integral part of our daily lives. From smartphones to smart cars, these intelligent gadgets have transformed the way we communicate, work, and live. In this article, we will explore some of the smartdevices that are commonly found in our surroundings and how they have made our lives easier and more convenient.1. Smartphone: Arguably the most ubiquitous smart device, smartphones have revolutionized the way we connect with others and access information. With features like GPS, voice assistants, and high-quality cameras, smartphones have become indispensable tools for communication, entertainment, and productivity.2. Smart Home Devices: From smart speakers like Amazon Echo and Google Home to smart thermostats and security cameras, these devices enable us to control our home environment with just a few taps on our smartphones. By automating tasks like turning on lights, adjusting the temperature, and monitoring our homes, smart home devices have made our living spaces more comfortable and secure.3. Wearable Technology: Smartwatches and fitness trackers are examples of wearable technology that have gained popularity in recent years. These devices can track our daily activities, monitor our health metrics, and even provide notifications for calls and messages. By keeping us connected and informed on the go, wearable technology has become a valuable companion for many people.4. Smart Cars: The automotive industry has also embraced smart technology with features like autonomous driving, adaptive cruise control, and in-car entertainment systems. Smart cars can enhance safety, efficiency, and comfort for drivers and passengers, making them a preferred choice for modern-day transportation.5. Smart Appliances: From refrigerators to washing machines, smart appliances have made household chores more manageable and efficient. With features like remote control, energy-saving modes, and automated settings, smart appliances can streamline our daily routines and save time and energy.In conclusion, smart devices have become an integral part of our lives, enhancing convenience, efficiency, and connectivity in various aspects of our daily routines. As technology continues to evolve, we can expect to see more innovations and advancements in smart devices that will further improve our quality of life. Let's embrace the opportunities that smart technology offers and continue to explore the endless possibilities of the digital age.篇3Smart devices have become an essential part of our daily lives, making tasks easier, more convenient, and efficient. From smartphones to smart speakers, the range of intelligent devices available continues to grow, offering endless possibilities for connectivity and automation.One of the most common smart devices found in many households today is the smart speaker. These devices, such as Amazon Echo and Google Home, are voice-activated assistants that can perform various tasks, such as playing music, setting reminders, providing weather updates, and controlling other smart devices in the home. With the ability to respond to voice commands, smart speakers have become a popular tool for managing our daily routines and staying organized.Another popular smart device that many people rely on is the smartphone. These handheld devices are more than just phones now; they are powerful computers that enable us to stay connected, access information, and perform a wide range of tasks on the go. With features such as voice assistants, GPS navigation, mobile payments, and countless apps, smartphones have become indispensable tools for communication, productivity, and entertainment.In addition to smart speakers and smartphones, there are many other intelligent devices that are transforming the way we live and work. Smart thermostats, for example, can learn our heating and cooling preferences and adjust the temperature accordingly, helping us save energy and money. Smart home security systems can monitor our homes, send alerts for suspicious activity, and even allow us to remotely control locks, lights, and cameras for added peace of mind.Furthermore, wearable devices like smartwatches and fitness trackers have become popular for monitoring our health and fitness goals. These devices can track our steps, heart rate, sleep patterns, and more, providing valuable insights into our overall well-being and helping us stay motivated to lead a healthier lifestyle.The rise of the Internet of Things (IoT) has made it possible for smart devices to communicate and work together seamlessly, creating a connected ecosystem that enhances our daily lives. Whether it's controlling our home appliances with a voice command, tracking our fitness goals with a wearable device, or staying connected with friends and family through our smartphones, smart devices have become an integral part of the modern world.As technology continues to advance, the possibilities for smart devices are endless. From smart cars and smart cities to smart wearables and smart appliances, the future of intelligent devices holds great promise for making our lives more efficient, convenient, and enjoyable. With the right combination of smart devices tailored to our needs and preferences, we can truly create a more connected and intelligent world around us.。
产品介绍演讲稿范文英文
Ladies and gentlemen,Good morning/afternoon/evening, and thank you for joining us today. I am thrilled to have the opportunity to introduce you to a revolutionary product that is set to transform the way we interact with our homes –the EcoSmart Smart Home System.Introduction to EcoSmartEcoSmart is a leading innovator in smart home technology, dedicated to creating products that not only enhance our daily lives but also promote sustainability and energy efficiency. Our mission is to make smartliving accessible to everyone, and the EcoSmart Smart Home System is the epitome of our commitment to this vision.Key Features of the EcoSmart Smart Home System1. Intelligent Control: At the heart of the EcoSmart system is its advanced intelligence. The system uses cutting-edge algorithms to learn your preferences and habits, allowing it to automate your home environment for optimal comfort and efficiency.2. Comprehensive Integration: The EcoSmart Smart Home System is designed to work seamlessly with a wide range of devices, from lighting and heating to security and entertainment. This means you can control every aspect of your home from a single, intuitive interface.3. Energy Efficiency: One of the primary goals of the EcoSmart system is to reduce energy consumption. With features like smart heating, cooling, and lighting control, you can significantly lower your utility bills while reducing your carbon footprint.4. Security and Safety: Our system prioritizes the safety and security of your home. With integrated smart security cameras, door sensors, and motion detectors, you can keep an eye on your property from anywhere in the world.5. Voice Control Compatibility: The EcoSmart Smart Home System is compatible with popular voice assistants like Amazon Alexa, GoogleAssistant, and Apple Siri. This means you can control your home with simple voice commands, making your life even more convenient.How It WorksThe EcoSmart Smart Home System is incredibly easy to set up and use. Here’s a quick rundown of the process:1. Installation: Our user-friendly guide will walk you through the installation process, ensuring that you can get your system up and running in no time.2. Configuration: Once installed, the system will automatically learn your preferences and adjust settings accordingly. You can also manually configure settings through the EcoSmart app.3. Control: Using the EcoSmart app or your preferred voice assistant,you can control every aspect of your home with ease. Adjust the temperature, turn on/off lights, check security cameras, and more, all from the convenience of your smartphone or smart speaker.Benefits of the EcoSmart Smart Home System- Convenience: With the EcoSmart system, you can enjoy a truly hands-free lifestyle, freeing up time for what matters most.- Sustainability: By reducing energy consumption, the EcoSmart system helps you contribute to a greener planet.- Security: Keep your home safe and secure, no matter where you are.- Peace of Mind: With the EcoSmart Smart Home System, you can rest easy knowing that your home is always in perfect condition.ConclusionIn conclusion, the EcoSmart Smart Home System is more than just a collection of smart devices; it’s a holistic approach to home management that brings together comfort, convenience, and sustainability. Whether you’re looking to enhance your home’s energy efficiency,improve your security, or simply make your life easier, the EcoSmart Smart Home System is the perfect solution.Thank you for considering EcoSmart as your smart home partner. We invite you to explore our system further and experience the future of smart living today.。
26659211_智能住宅
Crazy English2022.4Smart homes 智能住宅浙江江丽We ve all left the house and found ourselves wondering:Did I shut the door?Did I turn off the kitchen lights?If these moments of doubt crop up a lot in your day⁃to⁃day life,a smart home system could save you a great deal of stress and worry.Here s an introduction to smart house technology features.Flexible home control:The key to yoursmart homeThe primary advantage of a smart home is thatyou can flexibly control and automate (使自动化)your smart house ing an application on your smartphone or tablet,you can control everything like your lighting,heating and sound systems with maximum convenience.If your mobile device isn tat hand,your smart home is equipped with other ways to control your smart house technol⁃ogy —including voice control.Smart lighting control is one of the most common applications of smart house tech⁃nology.Smart lights can be controlled individually from the comfort of your sofa orcom⁃体裁：说明文文章词数：380建议用时：7分钟8Copyright©博看网. All Rights Reserved.疯狂英语（新读写）ReadingCheckⅠ.Skim the text and answer the following questions.1.What s the purpose of this text?2.How many smart house technology features are mentioned?3.What s the author s attitude to modern home technology?bined into groups so that you can set the mood —whatever kind of atmosphere you want to create.Make your guests feel welcome:Door communication goes mobileIn a smart home,you can see who s at your door before you open it —and even commu⁃nicate with visitors from your garden,the supermarket or your office.Modern smart house technology makes your door communication system mobile and gives you that extra level of peace of mind when unexpected visitors arrive.You can also operate your door communica⁃tion system remotely and invite guests in before you get home.Smart blind (卷帘)systems:For more security and comfortSmart blind systems are designed to improve comfort,convenience and security.With smart house technology,you can adjust your blinds to suit your needs by using intelligent wall switches to give you a little more privacy.Depending on the level of the sun,the out⁃door temperature and the time of day,your smart house technology can also provide the right amount of shade in your rooms to reduce the burden on your air condition⁃ing system and save energy.Intelligent home control technology is developing at a rapid pace.No matter whetheryou re in new or old buildings,in houses for rent or in your own home,modern home tech⁃nology is rapidly becoming the standard and will soon naturally enrich your everydaylife.9Copyright©博看网. All Rights Reserved.Crazy English 2022.4Ⅱ.Fill in the table according to the text.Smart homesTechnologyHome controlMobile door com⁃munication Smart blind systemsFunction Flexible home control can control everything like lighting,1.and sound systems.Door communication goes mobile,making it convenient for you to 2.with visitors no matter where you are.Smart blind systems can improve comfort,convenience,security and nguage StudyDifficult sentenceDepending on the level of the sun,the outdoor temperature and the time of day,your smart house technology can also provide the right amount ofshade inyour rooms to reduce the burden on your air conditioning system and save energy.根据日照强度、室外的温度和一天中的（不同）时间，你的智能家居科技（卷帘）还可以为你的房间提供适当的阴凉处，以减轻空调系统的负担和节省能源。
智能家居设备介绍说明书
SMART HOMEmore comfort, more security, more energy-efficiencyYour coffee machine starts brewing your first cup of the day as soon as your alarm goes off in the bedroom. The heating switches off when you open a window. Did you remember to close all doors and windows when you left the house? It takes just one look at your smartphone for reassurance and peace of mind –or even the option to remotely close the window which you had left open. Cleaning robots relieve us from having to do time-consuming and tedious chores around the house and outdoor cameras alert us of any suspicious activities. In other words: The Smart Home promises comfort and security as well as climate protection.This is no longer just a vision of the future: Already many people use at least onesmart home application. These include smart household appliances,language assistants, building/home security, home entertainment,energy management or comfort and lighting.Benefits of a Smart Home1)More living comfort: From lawn mowing and vacuuming down to making coffee –in a smart home many tasks can simplybe delegated. Lighting, smart TVs or music systems can easily be controlled using an app or voice command. Controlling devices using voice commands also increases the quality of life for elderly people or people with impaired mobility. It can even be lifesaving: in an emergency, you can get help by simply calling out for help or using the sensor alarms when there is no telephone within reach. A very important point in these times of demographic change.2)Saving energy: Using smart controls, energy consumption can be reduced significantly. Smart thermostats regulate roomtemperature automatically when nobody is at home. Additionally, lighting can also be adjusted more precisely. So, you do not only save costs, but also help to protect the environment.3)More security: Up to a certain point, the Smart Home can protect against intruders. Alarms and surveillance cameras canbe activated using motion sensors with event triggers. Intrusions can be recorded on a smartphone. However, to deter intruders in the first place, blinds can randomly be opened and closed or loud music can be played inside the house, even when nobody is at home.The correct sensors for the correct dataSmart Homes work through electrical device communication. Sensors record data that is transmitted to connected devices, which triggers the intended sequences.Sensors play a particularly important role. They must cover a broad range of different applications. Würth Elektronik has several sensors in its portfolio which are suitable for use in a Smart Home. Using acceleration sensors (WSEN-ITDS, 2533020201601), a Smart Home is able to recognize whether a person has fallen inside the house and trigger an appropriate responses. These sensors also detect whether a window is open or tilted. Using temperature sensors (WSEN-TIDS) and humidity sensors (WSEN-HIDS) for controlling indoor conditions naturally springs to mind. Together with an active ventilation system, the formation of mildew can be prevented. Absolute pressure sensors (WSEN-PADS, 2511020213301) are also suitable for the use in a Smart Home, for example as part of an intruder alarm system. If for example a window is broken or a door is opened, the sensor detects the change in air pressure. For such applications these sensors are often an easier and more cost-effective solution as compared to existing systems.In new buildings many of these technologies are installed during construction. However, if you already own a property and also want to benefit, you can easily retrofit and keep installation costs low for the sensors. The solution involves installing sensors without batteries or cables that rely on energy harvesting technologies to generate the energy required for measurements and data transmission. Naturally, Würth Elektronik’s sensors are very energy efficient, and, as an added bonus, the energy management can be modified.Communication through WiFiWith the WiFi radio module Calypso, Würth Elektronik offers a suitable radio solution. It is WiFi-certified, thus ensuring interoperability. Excellent security functions such as Secure Boot and SSL/TLS-V encryption protect the module and its application from remote attacks. The AT command interface can be easily configured and comes with an evaluation kit for quick prototype installation and testing. The most important benefit is the flexible firmware choice, where instead of standard firmware, customized firmware can be added during production of the module. The result is a unique out-of-the-box radio solution.Another benefit to note: Calypso is not only suitable for use in the Smart Home, but also ideal for industrial applicationsFurther infomation in our Wireless Connectivity & Sensors Product Guide.Würth Elektronik ComponentsCalypsoWi-Fi Radio Module (AMB5201)WSEN-ITDS3 Axis Acceleration SensorWSEN-PADSAbsolute Pressure SensorCharacteristics•MEMS based piezo-resistive sensing principle•Fully calibrated24 bit pressure output•Selectable output data rate up to200 Hz•128 level FIFO buffer•Embedded temperature sensor•I²C and SPI digital communication interface•Application specific interrupt event setting•Temperature range: -40 °C up to+85 °CApplications•Altimeters and barometers/ Weather stations•GPS navigation enhancement/ Indoor navigation•White goods•Wearable devicesCharacteristics•MEMS based capacitive sensing principle•Fully calibrated14 bit output•Full scale±2 g, ±4 g, ±8 g, ±16 g•Bandwidth up to1600 Hz•32 level FIFO buffer•Embedded temperature sensor•I²C and SPI digital communication interface•Application specific functionality: Free-fall, wake-up, tap,activity, motion and orientation detection•Temperature range: -40 °C up to+85 °CApplications•Industrial IoT and connected devices•Impact recognition and logging•Vibration monitoring•Predictive maintenance/ Activity trackingCharacteristics•Fully featured standalone Wi-Fi module•IEEE 802.11 b/g/n, 2.4 GHz•Small form factor: 19 x 27,5 x 4 mm•Industrial temperature range: -40 °C up to+85 °C•Low power operation to support battery operated applications •Sleep mode<10 μA, Power save mode< 2mA (Active network connection)•Output power +18 dBm peak(1DSSS)•Sensitivity-92 dBm(1DSSS, 8% PER)•Smart antenna configuration(2-in-1 Module)•Protocols implemented: TCP/IP(IPv4/IPv6), MQTT, SNTP,mDNS, DHCP•UART-to-Wi-Fi brigde(Transparent mode)•RESTful API support•WPA3 Wi-Fi security support•Remote GPIO configuration and control。
我的智能之家作文英语
我的智能之家作文英语Title: My Smart Home。
Introduction:In the contemporary era, the integration of technology into our daily lives has become increasingly prevalent. One such manifestation of this technological advancement is the concept of a smart home. A smart home incorporates various interconnected devices and systems that enhance convenience, comfort, and efficiency. In this essay, I will delve intothe functionalities and benefits of my smart home.Smart Security System:One of the paramount features of my smart home is its robust security system. Equipped with state-of-the-art surveillance cameras, motion sensors, and smart locks, my home ensures comprehensive protection against potential intrusions. The surveillance cameras offer real-timemonitoring, allowing me to keep a vigilant eye on my property even when I am away. Additionally, the motion sensors detect any suspicious activity and promptly notify me through my smartphone. Moreover, the smart locks provide an added layer of security by allowing me to remotely control access to my home, granting entry to authorized individuals with just a few taps on my phone.Home Automation:Another compelling aspect of my smart home is its automation capabilities, which streamline various household tasks and routines. Through a centralized smart hub, I can seamlessly control and coordinate different appliances and systems within my home. For instance, I can program the thermostat to adjust the temperature according to my preferences throughout the day, optimizing energy consumption and ensuring optimal comfort. Furthermore, the smart lighting system enables me to create customized lighting schemes and schedules, enhancing ambiance and energy efficiency. Additionally, I can automate mundane tasks such as watering the plants or feeding the pets,freeing up time for more meaningful pursuits.Voice-Activated Assistants:The integration of voice-activated assistantsconstitutes a pivotal component of my smart home ecosystem. Leveraging cutting-edge artificial intelligence technology, these assistants respond to verbal commands and perform various tasks with remarkable efficiency. Whether it's setting reminders, playing music, or retrieving information, I can rely on these assistants to cater to my needs instantaneously. Moreover, they seamlessly integrate with other smart devices, enabling me to control my entire home environment through simple voice commands. This hands-free approach to home management epitomizes the convenience and sophistication of modern technology.Energy Management:In addition to enhancing convenience and security, my smart home prioritizes energy efficiency and sustainability. Through advanced energy monitoring systems, I can track myenergy consumption in real-time and identify opportunities for optimization. Smart appliances such as energy-efficient refrigerators, washing machines, and thermostats further contribute to reducing my carbon footprint while minimizing utility bills. Furthermore, renewable energy sources such as solar panels harness the power of the sun to generate clean, sustainable electricity, thereby reducing reliance on traditional energy sources and mitigating environmental impact.Conclusion:In conclusion, my smart home represents a harmonious fusion of technology and lifestyle, where innovation converges with convenience and sustainability. From its comprehensive security system to its intuitive automation features, every aspect of my home is meticulously designed to enhance comfort, efficiency, and peace of mind. As technology continues to evolve, I look forward to embracing new advancements and further refining my smart home experience. Indeed, in the digital age, the possibilitiesfor creating a truly intelligent and interconnected living space are boundless.。
英语作文产品说明
英语作文产品说明Title: Product Description: Smart Home Assistant。
Introduction:In our rapidly evolving technological landscape, the concept of a smart home has become increasingly prevalent. With the integration of artificial intelligence andInternet of Things (IoT) devices, smart home assistants have emerged as indispensable tools for modern living. In this product description, we delve into the functionalities and benefits of our cutting-edge Smart Home Assistant.Features:1. Voice-Activated Control:Our Smart Home Assistant is equipped with state-of-the-art voice recognition technology, allowing users to control various smart devices in their homes effortlessly. Whetherit's adjusting the thermostat, dimming the lights, or playing music, users can simply issue voice commands for seamless operation.2. Home Automation:With the ability to connect to a wide range of smart devices, our Smart Home Assistant serves as the central hub for home automation. Users can create personalized routines and schedules, enabling tasks to be automated based ontheir preferences and lifestyle. From setting the coffee maker to brewing a fresh cup in the morning to ensuring the lights are turned off before bedtime, the possibilities are endless.3. AI-Powered Assistance:Powered by advanced artificial intelligence algorithms, our Smart Home Assistant offers more than just basic commands. It learns from user interactions and adapts to individual preferences over time, providing personalized recommendations and assistance. Whether it's suggestingrecipes based on dietary restrictions or reminding users of upcoming appointments, the AI capabilities enhance the overall user experience.4. Security and Monitoring:Security is paramount in any smart home ecosystem, and our Smart Home Assistant is designed with built-in security features to ensure peace of mind. From monitoring surveillance cameras to detecting unusual activity and sending alerts, users can keep their homes safe and secure, even when they're away. Additionally, integration with smart locks allows for convenient access control, further enhancing home security.5. Compatibility and Connectivity:Our Smart Home Assistant is compatible with a wide range of smart devices from leading manufacturers, ensuring seamless integration into existing smart home ecosystems. Whether it's smart lights, thermostats, door locks, or entertainment systems, users can connect and control theirdevices with ease. Furthermore, the assistant supports connectivity protocols such as Wi-Fi, Bluetooth, and Zigbee, providing flexibility and reliability.Benefits:1. Convenience: By centralizing control and automation, our Smart Home Assistant streamlines daily tasks and routines, saving users time and effort.2. Efficiency: With intelligent automation and optimization, users can reduce energy consumption andutility costs, contributing to a more sustainable lifestyle.3. Security: The robust security features offer peaceof mind by providing real-time monitoring and alerts for enhanced home security.4. Personalization: Through AI-powered assistance, the Smart Home Assistant delivers personalized experiences tailored to individual preferences and needs.5. Flexibility: With compatibility across a wide range of devices and connectivity options, our Smart Home Assistant offers flexibility and scalability for future expansion and integration.Conclusion:In conclusion, our Smart Home Assistant represents the next evolution in home automation and connectivity. With its advanced features, seamless integration, and personalized experiences, it empowers users to create smarter, more efficient, and secure homes. Experience the future of living with our Smart Home Assistant today.。
智能锁英语介绍作文
智能锁英语介绍作文Title: Introduction to Smart Locks。
In today's rapidly evolving technological landscape, smart locks have emerged as innovative solutions to modern security challenges. With their advanced features and seamless integration with smart home systems, smart locks offer convenience, flexibility, and enhanced security. In this essay, we will delve into the various aspects of smart locks, exploring their functionalities, benefits, and implications.First and foremost, smart locks represent a paradigm shift in traditional lock technology. Unlike conventional locks that rely solely on mechanical keys, smart locks utilize cutting-edge electronic mechanisms to control access. These locks can be operated through various means, including smartphones, key fobs, keypad entry, and even biometric authentication such as fingerprint recognition. This versatility empowers users with multiple options foraccessing their premises, enhancing convenience and flexibility.One of the key advantages of smart locks is their integration with smart home ecosystems. By connecting to home automation platforms like Amazon Alexa, Google Assistant, or Apple HomeKit, smart locks can seamlessly integrate with other smart devices in the home. This integration enables users to create custom routines and automation scenarios, such as automatically locking the door when the security system is armed or granting temporary access to guests or service providers remotely.Moreover, smart locks offer advanced security features that go beyond traditional locks. Many smart locks are equipped with tamper detection sensors, intrusion alerts, and activity logs, providing users with real-time insights into the security status of their premises. Additionally, remote access capabilities allow users to lock or unlock their doors from anywhere in the world using their smartphones, adding an extra layer of convenience and peace of mind.Another noteworthy benefit of smart locks is their ability to streamline access management. With traditional locks, managing multiple keys and coordinating access for family members, guests, or maintenance personnel can be cumbersome and prone to security risks. In contrast, smart locks enable users to easily grant or revoke access privileges remotely, eliminating the need for physical keys and enhancing security control.Furthermore, smart locks are designed to enhance user experience through intuitive interfaces and user-friendly mobile applications. Setup and installation are often straightforward, and the accompanying mobile apps provide intuitive controls for managing lock settings, viewing access logs, and receiving notifications. This user-centric approach ensures that even technologically inexperienced users can easily harness the full potential of smart lock technology.In conclusion, smart locks represent a significant advancement in home security and access control. With theirblend of innovative features, seamless integration, and enhanced security, smart locks offer unparalleled convenience and peace of mind to homeowners. As technology continues to evolve, smart locks are poised to become indispensable components of modern smart homes, revolutionizing the way we secure and manage access to our living spaces.In summary, smart locks represent a significant evolution in the realm of home security and access control. With their blend of innovative features, seamless integration with smart home ecosystems, and enhanced security measures, smart locks offer unparalleled convenience and peace of mind to homeowners. As technology continues to advance, smart locks are poised to become indispensable components of modern living, transforming the way we secure and manage access to our homes and premises.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
INTRODUCTION
Over the last thousands of years, people’s houses have improved a lot all over the world, from thatched /’θætƒt/cottages in the ancient time, you know, made up of long grasses to villa /’vile/or morden big houses. And with the development of e conomy and scientfic technology, the household appliances are more and more advanced. However, these changes don’t change the situation that all the appliances work independently. In morden houses, home equipments including those known as ‘intelligence’, such as freezers and air-conditions, and traditional ones, such as lights and televisions, are designed according to different standards. So they cannot be controled by one centre system and only work in a messy and disorder state instead of an order and organised state.
It is obvious that we need one centre management system(home server) to control our houses so as to make our houses more comfortable and safer. Actually, since 1980s, the concept of Homen Electronics has appeared, and several years later, it was developed by adding to communication and security,called Home Automation. In the late of 1980s, a comprehensive commercial system called Smart Home appears in America which can monitor and control all the home equipments. Untill the year of 1984, the concept of Smart Home came to the fact. the UTBS(United Techno1ogies Building System), an American company, firstly applied these ideas to a building named CityPlaceBuilding. From then, Smart Home became more and more popular in the world.
Imagine it. O ne day, when you come back home, door’s open with light’s on ，music flowing and air-condition working. How beautiful it is!! Every thing you want is ready. As people’s life level is raising up, Smart Home has been a n inevitable(必然的) trend.
However, Smart Home system in the market doesn’t meet people’s need on some aspects now. The research project will therefore seek to explore and investigate the following:
·To expand the development of other brands about the smart terminal(终端).
·To provide the choices of products’ function, control way and management ability for users.
·To meet users’individual requirements by allowing users to alter the system according to their needs.。