ELD-512SRWA中文资料
拉雷尔电子有限公司产品说明书
LAUREL ELECTRONICS, ureate™ Rate Meter & Totalizer with Functions A+B, A-B, AxB, A/B, A/B-1Features•Arithmetic functions A+B, A-B, AxB, A/B, A/B-1 applied to rate or total forchannels A & B•Frequencies from 0.005 Hz to 10 kHz•Independent scaling for each channel•Selectable "count by" of 10 or 100 with rounding•6-digit red or green LED display•Universal AC power Input, 85-264 Vac•Isolated 5, 10 or 24 Vdc excitation output•NEMA 4X, 1/8 DIN case•Optional serial I/O: Ethernet, USB, RS232, RS485, Ethernet-to-RS485 converter•Optional relay outputs: dual or quad relays, contact or solid state•Optional isolated analog output: 4-20 mA, 0-20 mA, 0-10V, -10 to +10V•Optional low voltage power: 10-48 Vdc or 12-32 VacDescriptionArithmetic functions A+B, A-B, AxB, A/B, A/B-1 applied tochannels A & B are a capability of Laureates with an Extendedcounter main board and FR dual-channel signal conditionerboard. These functions are applicable to rate or total after scalingto engineering units. The following are application examples:•Add two flows (A+B) for total flow or total volume.•Subtract two flows (A-B) for net flow or net volume.•Take the ratio of two flow rates (A/B) for chemical mixing.•Take the ratio of RPMs or belt speeds (A/B) to synchronizemoving machinery.•Subtract 1 from ratio (A/B-1) to control elongation of materialcompressed by rollers (draw).•Multiply belt speed by weight of material on the belt to for rateor weight of material delivered by the belt. A weighttransducer with frequency output is required.Ratio and draw are similar, except that 1 is subtracted from ratioto obtain draw. The frequency of channels A or B is measuredand converted to rate in engineering units by multiplying it by theappropriate scale factor for that channel. Either rate can bedisplayed. The A/B ratio is taken mathematically by the meter,and 1 is subtracted for draw. The result can be multiplied by amultiple or 10 from 0.0001 to 100000, and the decimal point canbe set to display the result with the desired precision up to sixdigits.Fast, High Resolution Measurements. Laureate countersdetermine frequency by timing an integral number of periods overa programmable gate time. The inverse period approach allowsgreater accuracy and faster update times than conventionalmeters which count signal pulses over a specified time interval.Channel A accepts pulses from 0.005 Hz to 1 MHz, while Chan-nel B accepts pulses from 0.005 Hz to 250 kHz. At the minimumgate time of 10 ms, update rates can be up to 25/second. Suchfast response is ideal for peak capture and for alarm and controlapplications. Variations in the displayed reading can be reducedby selecting a longer gate time. An adaptive digital filter canfurther reduce variations due to noise while rapidly responding toactual changes in the signal.Universal Signal Conditioner. The Laureate dual-channelsignal conditioner accepts inputs from proximity switches withPNP or NPN output, TTL or CMOS logic, magnetic pickups,contact closures, low-level outputs from turbine flow meters downto 12 mV, or high-level AC line inputs to 250 Vac. Jumper selec-tions provide optimum operation for different sensor types andnoise conditions. A built-in isolated 5, 10, or 24 Vdc excitationsupply can power proximity switches or other sensors, andeliminate the need for an external power supply.Designed for system use. Optional plug-in boards includeEthernet and other serial communication boards, dual or quadrelay boards, and an isolated analog output board. Laureatesmay be powered from 85-264 Vac or optionally from 12-32 Vacor 10-48 Vdc. The display is available with red or green LEDs.The 1/8 DIN case meets NEMA 4X (IP65) specifications from thefront when panel mounted. Any setup functions and front panelkeys can be locked out for simplified usage and security. A built-in isolated 5, 10, or 24 Vdc excitation supply can power trans-ducers and eliminate the need for an external power supply.All power and signal connections are via UL / VDE / CSA ratedscrew clamp plugs.SpecificationsDisplayReadout Display Range Zero Adjust Span Adjust Indicators 6 LED digits, 7-segment, 14.2 mm (.56"), red or green LED -999999 to +999999, XXXXEX notation beyond 999999-999999 to +9999990 to 999999Four LED lampsInputsTypesSignal Ground Channel A Frequency Channel B Frequency Minimum Signal Maximum Signal Noise FilterContact Debounce AC, pulses from NPN, PNP transistors, contact closures, magnetic pickups Common ground for channels A & B0.005 Hz to 1 MHz0.005 Hz to 250 kHzNine ranges from (-12 to +12 mV) to (+1.25 to +2.1V)250 Vac1 MHz, 30 kHz, 250 Hz (selectable)0, 3, 50 ms (selectable)Rate AccuracyTime Base Span Tempco Long-term Drift Crystal calibrated to ±2 ppm ±1 ppm/°C (typ)5 ppm/yearPowerVoltage, standard Voltage, optional Power frequency Power consumption (typical, base meter) Power isolation 85-264 Vac or 90-300 Vdc12-32 Vac or 10-48 VdcDC or 47-63 Hz1.2W @ 120 Vac, 1.5W @ 240 Vac, 1.3W @ 10 Vdc, 1.4W @ 20 Vdc, 1.55W @ 30 Vdc, 1.8W @ 40 Vdc,2.15W @ 48 Vdc250V rms working, 2.3 kV rms per 1 min testExcitation Output (standard)5 Vdc10 Vdc24 VdcOutput Isolation 5 Vdc ± 5%, 100 mA10 Vdc ± 5%, 120 mA 24 Vdc ± 5%, 50 mA50 Vdc to meter groundAnalog Output (optional)Output Levels Current compliance Voltage compliance Scaling Resolution Isolation 4-20 mA, 0-20 mA, 0-10V, -10 to +10V (single-output option) 4-20 mA, 0-20 mA, 0-10V (dual-output option)2 mA at 10V ( > 5 kΩ load)12V at 20 mA ( < 600Ω load)Zero and full scale adjustable from -99999 to +9999916 bits (0.0015% of full scale)250V rms working, 2.3 kV rms per 1 min test(dual analog outputs share the same ground)Relay Outputs (optional)Relay Types Current Ratings Output common Isolation 2 Form C contact relays or 4 Form A contact relays (NO)2 or 4 Form A, AC/DC solid state relays (NO)8A at 250 Vac or 24 Vdc for contact relays120 mA at 140 Vac or 180 Vdc for solid state relays Isolated commons for dual relays or each pair of quad relays 250V rms working, 2.3 kV rms per 1 min testSerial Data I/O (optional)Board Selections ProtocolsData Rates Digital Addresses Isolation Ethernet, Ethernet-to-RS485 converter, USB, USB-to-RS485 converter, RS485 (dual RJ11), RS485 Modbus (dual RJ45), RS232.Modbus RTU, Modbus ASCII, Laurel ASCII protocol300 to 19200 baud247 (Modbus), 31 (Laurel ASCII),250V rms working, 2.3 kV rms per 1 min testEnvironmental Operating Temp. Storage Temp.Relative Humidity Protection0°C to 55°C -40°C to 85°C95% at 40°C, non-condensingNEMA-4X (IP-65) when panel mountedSignal ConnectionsMechanicalApplication ExamplesControlling the Mixing Ratio of Two FluidsDisplaying and alarming the input flow rate ratio of two fluids (gas or liquid) allows these to be mixed in a predetermined ratio in continuous processes. The sensing element is normally a turbine flowmeter, which outputs pulses at a frequency proportional to flow rate. The A/B ratio can also be displayed for totalized rate (or delivered volume). Comparing Fluid Inflow & OutflowThe ratio of the inflow and outflow rates of a tank is a measure of the relative filling or emptying rate. The same meter can also be programmed to display the net inflow or outflow rate in flow units, or to display totalized inflow our outflow in volume units. Any of these parameters can be alarmed using the dual relay board and be transmitted via 4-20 mA, RS-232 or RS-485. Controlling Coating Thickness on a FilmIn this application, Channel A measures the rate at which a coating material is applied, as measured by a flow meter, while Channel B measures the speed of the film based on pulses from a proximity switch. Displaying and alarming the A/B ratio assures that an even thickness of coating material is applied as the speed of the film is varies. Synchronizing Two Conveyor LinesThe dual-channel Laureate counter can measure the speed of conveyor lines by using the output of proximity switches which sense gear teeth or spokes of rotating drive wheels. Displaying the speed ratio of two lines allows line speeds to be adjusted so that material arrives at work stations when needed. Measuring Draw for ElongationDraw (Ch A / Ch B - 1) can be used to display the elongation of films compressed between rollers, the shrinkage films, and the RPM difference of rollers whose speed is varied to maintain tension. The six-digit resolution of the Laureate dual channel counter / rate meter is ideal for comparison of rates that are close to each other.Ordering GuideCreate a model number in this format: L70000FR, IPCMain Board L7 Extended Main Board, Green LEDsL8 Extended Main Board, Red LEDsNote: Extended capability is required for arithmetic functions, simultaneous rate and total in thesame counter, phase, stopwatch, batching, and custom curve linearization.Power0 Isolated 85-264 Vac1 Isolated 12-32 Vac or 10-48 VdcRelay Output (isolated) 0 None1 Two 8A Contact Relays2 Two 120 mA Solid State Relays3 Four 8A Contact Relays4 Four 120 mA Solid State RelaysAnalog Output (isolated) 0 None1 Single isolated 4-20 mA, 0-20 mA, 0-10 V, -10 to +10V2 Dual isolated 4-20 mA, 0-20 mA, 0-10VDigital Interface (isolated) 0 None1 RS-2322 RS485 (dual RJ11 connectors)4 RS485 Modbus (dual RJ45 connectors)5 USB6 USB-to-RS485 converter7 Ethernet8 Ethernet-to-RS485 converterInput Type FR Dual-Channel Pulse Input Signal ConditionerAdd-on Options CBL01RJ11-to-DB9 cable. RJ11 to DB9. Connects RS232 ports of meter and PC.CBL02USB-to-DB9 adapter cable. Combination of CBL02 and CBL01 connects meterRS232 port to PC USB port.CBL03-16-wire data cable, RJ11 to RJ11, 1 ft. Used to daisy chain meters via RS485.CBL03-76-wire data cable, RJ11 to RJ11, 7 ft. Used to daisy chain meters via RS485.CBL05USB cable, A-B. Connects USB ports of meter and PC.CBL06USB to RS485 adapter cable, half duplex, RJ11 to USB. Connects meter RS485 portto PC USB port.CASE1Benchtop laboratory case for one 1/8 DIN meterCASE2Benchtop laboratory case for two 1/8 DIN metersIPC Splash-proof coverBOX1NEMA-4 EnclosureBOX2NEMA-4 enclosure plus IPCBL Blank Lens without button padsNL Meter lens without button pads or Laurel logo。
R12I05资料
Electrical Specifications (measured at TA = 25°C, at nominal input voltage and rated output current unless otherwise specified)
Input Voltage Range VIN (continuous operation) Reflected Ripple Current (depending on the type) Voltage Set Point Accuracy Line Regulation (high VIN to low VIN) Load regulation (depending on the type) Ripple and Noise (BW=DC to 20MHz) (depending on the type) Isolation Voltage (flash tested for 1 second) Test Voltage (50Hz, 10 seconds) Resistance (Viso = 500V) Switching Frequency Package Weight Storage Temperature Range Operating Temperature Range (all output types) Case Temperature Above Ambient (depending on the type) MTTF 1) (depending on the type) –40°C +25°C +85°C SIP types 5V types 12V types 4.5VDC min. / 5.5VDC max. 10.8VDC min. / 13.2VDC max. 23 mA p-p min. to 38 mA p-p max. see Tolerance Envelope 1.0% min. / 1.2% max. of VIN 3.7% min. / 8.5% max. 45mVp-p min. / 200mVp-p max. 1000VDC min. 1000 Vpk min. 10 GΩ min. 90kHz typ. 2.0 g –50°C to +130°C –40°C min. to +85°C max. (see graph) +36°C min. / +45°C max. 417kHrs min. / 3970kHrs max. 328kHrs min. / 2327kHrs max. 222kHrs min. / 934kHrs max.
磁盘阵列产品简介AL5121F
磁盘阵列产品简介—AL5121FCable-less无线缆设计Aisino磁盘阵列采用了全新的Cable-less无线缆连接的内部结构,大大减少了因线缆连接带来的故障隐患。
什么是Cable-less结构的磁盘阵列?所谓Cable-less结构的磁盘阵列,是指磁盘阵列内部所有部件,包括控制器、I/O通道板、冗余涡轮风扇、冗余电源、铝质合金磁盘托架、前端面板显示均为模块化设计,各个模块均是通过“金手指”的方式直接插接在背板上,模块与背板之间无任何连接线缆。
这类的磁盘阵列为真正的Cable-less结构的磁盘阵列。
Cable-less结构的磁盘阵列解决了什么问题?1、避免了数据信号因线缆或接头材质不良而引起的信号串扰,从而带来的系统不稳定。
(不存在线缆的氧化问题)2、解决了因线缆的连接问题而对系统造成的不稳定。
Cable-less结构的磁盘阵列优势与特点是什么?1、“金手指”代替各类线缆作为传输介质,使得传输速率更快速,稳定。
2、故障发生率降到最低,系统更加稳定。
3、调试、安装、维护非常方便简单。
Aisino 磁盘阵列即是基于这样的结构设计而成的。
Aisino磁盘阵列内部结构共分六大模块:控制器模块、I/O通道板模块、冗余涡轮风扇模块、冗余电源模块、铝质合金磁盘托架模块、前端面板显示模块。
所有模块均配有“金手指”插针,直接插接在背板上,模块与背板之间无任何连接线缆。
由于是Cable-less结构,从而去除了众多连接线缆(电源线和SCSI线缆),就不存在线缆的氧化问题。
因此,磁盘阵列本身能够有效地避免数据信号因SCSI线缆或接头材质不良而引起的信号串扰,同时解决了因线缆的连接问题而对系统造成不稳定的难题。
Aisino磁盘阵列的Cable-less结构使得磁盘阵列传输速率更快速,故障发生率降到最低,系统更加稳定,而且在调试、安装、维护等方面非常方便简单。
维护人员不需要打开机箱,按照相应的步骤,即可迅速更换部件,排除故障,使业务系统保持正常运行。
场效应管j512参数及代换
场效应管j512参数及代换FGA25N120AND(IGBT)1200V/25A//TO3P(电磁炉用)FQA27N25(MOSFET)250V/27A/TO3P IRFP254FQA40N25(MOSFET)250V/40A/280W/0.051Ω/TO3P IRFP264FQA55N25(MOSFET)250V/55A/310W/0.03Ω/TO3PFQA18N50V2(MOSFET)500V/20A/277W/0.225ΩIRFP460AFQA24N50(MOSFET)500V/24A/290W/0.2Ω/TO3PFQA28N50(MOSFET)500V/28.4A/310W/0.126Ω/TO3P MTY30N50E FQL40N50(MOSFET)500V/40A/560W/0.085Ω/TO264 IRFPS37N50 FQA24N60(MOSFET)600V/24A/TO3PFQA10N80(MOSFET)800V/9.8A/240W/0.81Ω/TO3PFQA13N80(MOSFET)800V/13A/300W/0.Ω/TO3PFQA5N90(MOSFET)900V/5.8A/185W/2.3Ω/TO3PFQA9N90C(MOSFET)900V/8.6A/240W/1.3Ω/TO3PFQA11N90C(MOSFET)900V/11.4A/300W/0.75Ω/TO3PFFA30U20DN(快恢复二极管)200V/2×30A/40ns/TO3PDSEK60-02AFFPF30U60S(快恢复二极管)600V/30A/90ns/TO220F MUR1560 FFA30U60DN(快恢复二极管)600V/2×30A/90ns/TO3PDSEK60-06AMBRP3010NTU(肖特基)100V/30A/TO-220MBRA3045NTU(肖特基)45V/30A/TO-3PISL9R3060G2(快恢复二极管)600V/30A/35ns/200W/TO247 APT30D60BRHRG3060(快恢复二极管)600V/30A/35nS/TO247FQP44N10(MOSFET)100V/44A/146W/0.0396Ω/TO220IRF3710/IRF540NFQP70N10(MOSFET)100V/57A/160W/0.025Ω/TO220IRFP450B(MOSFET)500V/14A/0.4Ω/205W/TO3PIRFP460C(MOSFET)500V/20A/0.2~0.24Ω/235W IRFP460KA3162/FAN8800(Drive IC)单IGBT/MOSFETFET驱动ICRHRP860(快恢复二极管)600V/8A/30NS/TO-220 MUR860RHRP1560(快恢复二极管)600V/15A/TO0220 MUR1560RHRP8120(快恢复二极管)1200V/8A/75W/TO220RHRP15120(快恢复二极管)1200V/15A/TO220RHRP30120(快恢复二极管)1200V/30A/125W/TO220单DSEI20-10ARHRG30120(快恢复二极管)1200V/30A/T03PSSH45N20B(MOSFET)200V/45A/TO3P IRFP260FGL40N150D(IGBT)1500V/40A/TO264快速IGBTFGL60N100BNTD(IGBT)1000V/60A/TO264快速IGBT 1MBH60-100 HGTG10N120BND(IGBT)1200V/35A/298W/100ns/TO247HGTG11N120CND(IGBT)1200V/43A/298W/TO247HGTG18N120BND(IGBT)1200V/54A/390W/90ns/TO247FQP5N50C(MOSFET)500V/5A/73W/1.4Ω/TO-220替代:IRF830,用于35WFQPF5N50C(MOSFET)500V/5A/38W/1.4Ω/TO-220F替代:IRF830,用于35WFQP9N50C(MOSFET)500V/9A/135W/0.6Ω/TO220替代:IRF840,用于75WFQPF9N50C(MOSFET)500V/9A/44W/0.6Ω/TO-220F替代:IRF840,用于75WFQP13N50(MOSFET)500V/13.4A/190W/0.43Ω/TO220用于75W/125W产品FQPF13N50(MOSFET)500V/13.4A/48W/0.43Ω/TO220F用于75W/125W产品FQD5N50C(MOSFET)500V/5A/1.4Ω/TO252用于35WFQA16N50(MOSFET)500V/16A/200W/0.32C/TO3P用于150W到250W 的产品FDP15N50(MOSFET)500V/15A/0.43Ω/56W/TO220用于150W左右的产品FQP18N50V2(MOSFET)500V/18A/0.43Ω/208W/TO220用于250WG 到400W的产品FQPF18N50V2(MOSFET)500V/18A/0.43Ω/56W/TO220用于250WG 到400W的产品FQA18N50V2(MOSFET)500V/20A/277W/0.225Ω/TO3P用于250WG 到400W的产品FQA24N50(MOSFET)500V/24A/290W/0.2Ω/TO3P用于400W的产品FQA24N60(MOSFET)600V/23.5A/310W/0.24Ω/TO3P用于400W 的产品FQA28N50(MOSFET)500V/28.4A/310W/0.126Ω/TO3P用于400W 的产品FQL40N50(MOSFET)500V/40A/560W/0.085Ω/TO264用于560W 的产品IRF740B(MOSFET)400V/10A/0.55Ω/134W/TO220IRF730B(MOSFET)400V/5.5A/1.0Ω/73W/TO220IRF830B(MOSFET)500V/4.5A/1.5Ω/73W/TO220IRF840B(MOSFET)500V/8A/0.85Ω/134W/TO220IRFP450B(MOSFET)500V/14A/0.4Ω/205W/TO3PIRFP460C(MOSFET)500V/20A/0.2~0.24Ω/235WFQPF5N60C(MOSFET)600V/5A/TO220FFQPF8N60C(MOSFET)600V/8A/TO220FFQPF10N60C(MOSFET)600V/10A/TO220FQPF12N60(MOSFET)600V/12A/51W/0.65Ω/TO220FFCP11N60(MOSFET)650V/11A/125W0.32Ω/TO220RHRD660S(快恢复二极管)600V/6A/TO-252RHRP860(快恢复二极管)600V/8A/75W/TO-220 RHRP1560(快恢复二极管)600V/15A/TO-220单2N7002(三极管)60V/0.12A/SOT-23HUF76629D3S(MOSFET)100V/20A/110W/TO-252 HUF75639S3S(MOSFET)100V/56A/200W/TO-263ISL9V3040D3S(IGBT)430V/21A/150W/300MJ/TO252 ISL9V3040S3S(IGBT)430V/21A/150W/300MJ/TO263 ISL9V5036S3S(IGBT)360V/46A/250W/TO262FQP33N10L(MOSFET)100V/33A/52MΩ127W/TO220。
拉雷尔电子有限公司产品说明书
LAUREL ELECTRONICS, INC.4-20 mA & Serial Output Transmitter for Resistance Input in OhmsFeatures•4-20 mA, 0-20 mA, 0-10V or -10V to +10V transmitter output, 16 bits, isolated•RS232 or RS485 serial data output, Modbus or Laurel ASCII protocol, isolated•Dual 120 mA solid state relays for alarm or control, isolated•Five precalibrated resistance input ranges from 20.000 Ω to 200.00 kΩ•Fixed 2.0000 ohm, 2.0000 MΩ and 20.000 MΩ range available as a factory specia• 1 mΩ resolution on 20 Ω scale•Custom curve linearization for changing resistance transducers•2, 3 or 4-wire connection with lead resistance compensation•Analog output resolution 0.0015% of span (16 bits), accuracy ±0.02% of span•DIN rail mount housing only 22.5 mm wide, detachable screw-clamp connectors•Universal 85-264 Vac / 90-300 Vdc or 10-48 Vdc / 12-32 Vac powerDescriptionThe Laureate Resistance Transmitter is factory calibrated forfive jumper selectable resistance ranges from 20 Ω to 200 kΩ.Fixed factory-special ranges of 2.000 Ω, 2.0000 MΩ and 20.000MΩ are also available. Accuracy is an exceptional 0.01% of fullscale ± 2 counts. Resolution is one part in 20,000. In the 20 Ωrange, resolution is 1 mΩ, making the transmitter suitable forcontact resistance and conductance measurements.Transmitter connections can be via 2, 3 or 4 wires. With 4-wirehookup, 2 wires are used for excitation and two separate wiresare used to sense the voltage across the resistance to bemeasured, thereby eliminating any lead resistance effects. With3-wire hookup, the transmitter senses the combined voltage dropacross the RTD plus two excitation leads. It also senses thevoltage drop across one excitation lead, and then subtracts twicethis voltage from the combined total. This technique effectivelysubtracts the lead resistance if the excitation leads are the same.All resistance ranges are digitally calibrated at the factory, withcalibration factors stored in EEPROM on the signal conditionerboard. This allows ranges and signal conditioner boards to bechanged in the field without recalibrating the transmitter. Ifdesired, the transmitter can easily be calibrated using externalstandards plus scale and offset in software.Fast read rate at up to 50 or 60 conversions per second whileintegrating the signal over a full power line cycle is provided byConcurrent Slope (Pat 5,262,780) analog-to-digital conversion.High read rate is ideal for peak or valley capture and for real-timecomputer interface and control.Open sensor indication is standard and may be set up to indi-cate either upscale or downscale. Excitation is provided by thetransmitter.Custom curve linearization, available with the Extendedversion, makes this transmitter ideal for use with transducerswhose output is a changing resistance.Standard features of Laureate transmitters include:•4-20 mA, 0-10V or -10V to +10V analog transmitter output,isolated, jumper-selectable and user scalable. All selectionsprovide 16-bit (0.0015%) resolution of output span and 0.02%output accuracy of a reading from -99,999 to +99,999 countsthat is also transmitted digitally. Output isolation from signaland power grounds eliminates potential ground loop problems.•Serial communications output, isolated. User selectableRS232 or RS485, half or full duplex. Three protocols are userselectable: Modbus RTU, Modbus ASCII, or Laurel ASCII.Modbus operation is fully compliant with Modbus Over SerialLine Specification V1.0 (2002). The Laurel ASCII protocolallows up to 31 Laureate devices to be addressed on thesame RS485 data line. It is simpler than the Modbus protocoland is recommended when all devices are Laureates.•Dual solid state relays, isolated. Available for local alarm orcontrol. Rated 120 mA at 130 Vac or 170 Vdc.•Universal 85-264 Vac power. Low-voltage 10-48 Vdc or 12-32 Vac power is optional.Easy Transmitter programming is via Laurel's InstrumentSetup Software, which runs on a PC under MS Windows. Thissoftware can be downloaded from this website at no charge. Therequired transmitter-to-PC interface cable is available from Laurel(P/N CBL04).SpecificationsRange Resolution Accuracy Excitation Current0-2.0000 Ω 0-20.000 Ω 0-200.00 Ω 0-2000.0 Ω 0-20000 Ω 0-200.00 kΩ 0-2.0000 MΩ 0-20.000 MΩ 0.1 mΩ1 mΩ10 mΩ100 mΩ1 Ω10 Ω100 Ω1 kΩ±0.01% of range± 2 counts5 mA5 mA500 µA50 µA5 µA500 nA500 nA75 nASignal InputInput Resolution Input Accuracy Update Rate, Max 16 bits (65,536 steps)±0.01% of full scale ± 2 counts 50/sec at 50 Hz, 60/sec at 60 HzAnalog Output (standard)Output Levels Compliance at 20 mA Compliance at 10V Output Resolution Output Accuracy Output Isolation 4-20 mA, 0-20 mA, 0-10 Vdc, -10 to +10Vdc (user selectable) 10V (0-500Ω load)2 mA (5 kΩ load or higher)16 bits (65,536 steps)0.02% of output span plus conversion accuracy250V rms working, 2.3 kV rms per 1 minute testSerial Communications (standard)Signal TypesData RatesOutput Isolation Serial Protocols Modbus Modes Modbus Compliance Digital Addressing RS232 or RS485 (half or full duplex)300, 600, 1200, 2400, 4800, 9600, 19200 baud250V rms working, 2.3 kV rms per 1 min testModbus RTU, Modbus ASCII, Laurel ASCIIRTU or ASCIIModbus over Serial Line Specification V1.0 (2002)247 Modbus addresses. Up to 32 devices on an RS485 line w/o a repeater.Dual Relay Output (standard)Relay Type Load Rating Two solid state relays, SPST, normally open, Form A 120 mA at 140 Vac or 180 VdcPower InputStandard Power Low Power Option Power Frequency Power Isolation Power Consumption 85-264 Vac or 90-300 Vdc10-48 Vdc or 12-32 VacDC or 47-63 Hz250V rms working, 2.3 kV rms per 1 min test 2W typical, 3W with max excitation outputMechanicalDimensions MountingElectrical Connections 129 x 104 x 22.5 mm case35 mm rail per DIN EN 50022 Plug-in screw-clamp connectorsEnvironmentalOperating Temperature Storage Temperature Relative Humidity Cooling Required 0°C to 55°C-40°C to 85°C95% at 40°C, non-condensingMount transmitters with ventilation holes at top and bottom. Leave 6 mm (1/4") between transmitters, or force air with a fan.PinoutMechanicalQA Application with Relays in Passband ModeA deviation limit (50 mΩ in this example) is set uparound both sides of a setpoint. The relay closes (oropens) when the reading falls within the deviationband, and opens (or closes) when the reading fallsoutside of this band. This mode sets up a passbandaround the setpoint and can be used for contactresistance testing in a production environment.RTD HookupIn 4-wire hookup, different pairs of leads are used to apply the excitation current and sense the voltage drop across the unknown resistance, so that the IR drop across the excitation leads is not a factor.In 3-wire hookup, the transmitter senses the combined voltage drop across the unknown resistance plus two excitation leads. It also senses the voltage drop across one excitation lead, and then subtracts twice this voltage from the combined total. This technique effectively subtracts all lead resistance and compen-sates for ambient temperature changes if the two excitation leads are identical.In 2-wire hookup, the transmitter senses the combined voltage drop across the unknown resistance and both lead wires. The voltage drop across the lead wires can be measured by shorting out the resistance during transmitter setup, and this voltage is then automatically subtracted from the combined total. However, changing resistance of the lead wires due to ambient tempera-ture changes will not be compensated.Ordering GuideCreate a model a model number in this format: LT20R1Transmitter Type LT Laureate 4-20 mA & RS232/RS485 output transmitter Main Board 2 Standard Main BoardPower0 Isolated 85-264 Vac or 90-300 Vdc 1 Isolated 10-48 Vdc or 12-32 VacResistance RangeR0 0-20 ohms (factory special fixed range) R1 0-20 ohms R2 0-200 ohms R3 0-2 kohms R4 0-20 kohms R5 0-200 kohmsR6 0-2 Mohms (factory special fixed range) R7 0-20 Mohms (factory special fixed range)Note: The same signal conditioner board can be used for resistance and RTD temperature measurement.AccessoriesCBL04 RS232 cable, 7ft. Connects RS232 screw terminals of LT transmitter to DB9port of PC.CBL02 USB to RS232 adapter cable. Combination of CBL02 and CBL04 connectstransmitter RS232 terminals to PC USB port.。
ELT-512SRWA中文资料
EVERLIGHT ELECTRONICS CO.,LTD.Device Number :DDT-512-034REV: 1.0 0.56" Tripple Digit DisplaysMODEL NO :ELT-512SRWA ECN :Page:1/5█ Features :█ Applications:●Industrial standard size.●Audio equipment●Low power consumption.●Instrument panels●Categorized for luminous intensity.●Digital readout display █ Description :●The ELT-512 series is a large 14.22mm(0.56")high seven segment displaydesign for viewing distances up to7 meters.●These displays provide excellentreliability in bright ambient light.●These device is made with whitesegments and gray surface.PART NO CHIP C.C. or C.A.Material Emitted ColorELT-512SRWA GaAlAs Super Red C.A.OFFICE : NO. 25,Lane 76,Sec.3, Chung Yang Rd., Tucheng 236, Taipei, Taiwan, R.O.C.TEL : 886-2-2267-2000,2267-9936FAX : 886-2-2267-6244,22676189,22676306EVERLIGHT ELECTRONICS CO.,LTD.Device Number :DDT-512-034REV: 1.0 0.56" Tripple Digit DisplaysMODEL NO :ELT-512SRWA ECN :Page:2/5█ NOTES:1.All dimensions are millimeters ,tolerance is 0.25mm unless otherwise noted.2.Above specification may be changed without notice.Supplier will reserve authority on material change for above specification.Device Number :DDT-512-034REV: 1.0 0.56" Tripple Digit DisplaysMODEL NO :ELT-512SRWA ECN :Page:3/5█Absolute maximum ratings at Ta = 25℃:Parameter Symbol Rating UnitReverse Voltage Vr5VForward Current If40mAOperating Temperature Topr-40 to +85℃Storage Temperature Tstg-40 to +100℃Soldering Temperature Tsol260 ± 5℃Power Dissipation Pd110mWPeak Forward Current(Duty1/10 @ 1KHZ)If(Peak)180mA█Electronic optical characteristics :Parameter Symbol MIN.TYP.MAX.Unit ConditionLuminousPersegment Iv4.0 6.0----mcd If=10mAIntensity Perdecimal point 1.40 2.80----mcd If=10mAPeak Wavelengthλp----660----nm If=20mA Dominant Wavelengthλd----643----nm If=20mA Spectrum RediationBandwidth△λ----20----nm If=20mA Forward Voltage Vf 1.5 1.7 2.4V If=20mA Reverse Current Ir--------10µA Vr=5VDevice Number :DDT-512-034REV: 1.0 0.56" Tripple Digit DisplaysMODEL NO :ELT-512SRWA ECN :Page:4/5█ Reliability test item and condition:NO Item Test ConditionsTestHours/CycleSample Size Ac/Re1Solder Heat TEMP : 260℃ ± 5 ℃ 5 SEC76 PCS0/1H : +85℃ 30min2Temperature Cycle∫ 5 min50 CYCLE76 PCS0/1L : -55℃ 30minH : +100℃ 5min3Thermal Shock∫ 10 sec50 CYCLE76 PCS0/1L : -10℃ 5min4High Temperature Storage TEMP : 100℃1000 HRS76 PCS0/1 5Low Temperature Storage TEMP : -55℃1000 HRS76 PCS0/1 6DC Operating Life If = 10 mA1000 HRS76 PCS0/17High Temperature / HighHumidity85℃/85% RH1000 HRS76 PCS0/1Device Number :DDT-512-034REV: 1.0 0.56" Tripple Digit DisplaysMODEL NO:ELT-512SRWAECN :Page:5/5。
mdx 512
DMX512中文使用说明书一、四位数码管说明:XXXX*第一位代表CHASE,共有6个*第二位代表SCENSE,共有8个*第三四位代表BANK,共有30个*设置MIDI通道时第三四位代表MIDI通道,共有16个MIDI通道*一个CHASE最多可以包含240个SCENSE*一个BANK最多可以包含8个SCENSE*一个SCENSE最多可以包含192个通道(也可以说是12个SCANNER) SCANNER1:通道1~通道16SCANNER2:通道17~通道32以此类推SCANNER12:通道181~通道192*一个SCANNER最多可以包含16个通道*调节滑杆时显示数值或者百分比二、操作时请注意数码屏的指示灯在什么状态。
*BLANKOUT*STEP*PROGRAM*MUSIC TIGGER*AUTO TIGGER三、DMX512面板功能说明1、SCANNERS按下SCANNER键,其旁边的LED灯亮,其中连接8个通道的输出可被调节,在SCENS运行时,如果可调电位器控制为OFF,则调节电位器不会影响通道输出,但如果可调电位器控制为ON,则通道输出会随相应的可调电位器的改变而改变;2、SCENS按健按下一个SCENS键可触发SCENS或存入一个SCENS,第二个数码管头显示SCENS1-8;3、可调电位器调节可调电位器改变DMX的通道输出大小,最小是0最大为255或者从0%-100%,可调电位器1-8控制连续的八个通道;4、PAGE/SELECT键选择PAGE A或PAGE B,PAGE A为每个SCANNER的前八个通道PAGE B为每个SCANNER的后八个通道;5、SPEED SLIDER推动这个推杆调整走灯速度;6、FADE TIME SLIDER推动这个推杆调整FADE TIME;7、LED DISPLAY8、BANK按键(↑/↓)第三位和第四位数码管显示BANKS(01-30),按下↑/↓键,BANK增大或减小,显示的SCENS为该BANK里的SCENS;9、CHASE 1-CHASE 6键用于CHASES编程或CHASES运行的选择;10、PROGRAM键上电本机在走动运行状态,按下PROGRAM键盘2秒,编程指示灯闪动可编程SCENSR和CHASER,再按下PROGRAM键2秒,编程指示灯灭回到运行状态;11、MIDI/ADD键A、在运行状态按住MIDI键2秒,第3及第4位数码管闪动,通过↑或↓选择MIDI 通道,再按MIDI键2秒结束MIDI通道的设置选择的MIDI通道被存贮;或者除↑/↓键以外的任何键都可结束MIDI通道的设置,不存贮所选取的MIDI通道;B、在编程状态,用于编辑;12、AUTO/DEL键A、在运行状态,按下AUTO/DEL键,自动触发指示灯亮,表示在自动触发状态,再按下AUTO键退出自动触发状态,自动触发指示灯灭;B、在编程状态,用于SCENS及CHASE编程;13、MUSIC/BANK COPY键A、在运行状态,按下MUSIC键,声音触发指示灯亮,可由声音触发SCENS,再按一下MUSIC键,声音触发指示灯灭,退出声音触发状态;B、在编程状态,用于SCENS及CHASE编程;14、TAPSYNC/DISPLAY键A:(1)、在AUTO运行状态,最后两次按下TAP SYNC/DISPLAY键决定SCENS运行的速率,最大时间为十分钟;(2)、不在AUTO运行状态,转换00-255或0%-100%;B:在编程状态(1)、对CHASE编程时,在步数显示和BANK显示之间转换;(2)、不在CHASE编程时转换00-255或0%-100%。
海哥尔德电子产品简介说明书
APRIL 2013Quick-Refere nce GuideLAPTOP, DESKTO P AND VIDEO STORAGE DRIVESSeagate Partner Program MembersVisit the Sales Tools section to access the latestproduct roadmap, end-of-life schedule and product information. DistributorsEMEA SPP Support00-800-6890-8282US Sales Support1-800-SEAGATE or 1-405-324-4700Visit for more information or call 1-800-SEAGATE (1-800-732-4283) © 2013 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Barracuda, G-Force Protection, Momentus, Pipeline HD, SmartAlign and SV35 Series are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the US Department of Commerce, Bureau of Industry and Security (for more information go to ). Seagate reserves the right to change, without notice, product offerings or specifications. QR502.15-1304GB, April 2013APRIL 2013Quick-Reference GuideLAPTOP, DESKTOP AND VIDEO STORAGE DRIVESNew Seagate Model Number KeyDesktop, laptop and video storageST 500 DX 001BRANdCAPACiTySegMeNTATTRiBuTeS2 letters ST= Seagate MX= Maxtor2 to 4 digits 80 = 80GB 500 = 500GB 1500 = 1,500GB Capacities>9,999GB: 10 = 10TB 15 = 15TB2 lettersDX = Desktop Premium DM = Mainstream DL = Entry LevelLX = Laptop Premium LM = Laptop Mainstream LT = Laptop Thin VX = Surveillance VM = DVR VT = DVR Thin3 digits, non-intelligent Varies for:Z-height Form Factor RPM Cache Interface SED, FIPS Drop Sensor Interface SpeedView a brief training presentation on how our model numbering format has changed at /seagate/ModelNumber 1 One gigabyte, or GB, equals one billion bytes; and one terabyte, or TB, equals one trillion bytes when referring to drive capacity.2See FIPS 140-2 Level 2 Certificate at /groups/STM/cmvp/documents/140-1/1401vend.htm.37mm z-height expanded to 9.5mm enables compatibility with standard laptop chassis.4Advanced Format 4K sector drive with SmartAlign ™ technology resolves misalignment conditions.5Seagate makes this drive in both 4K and 512-byte sectors. SmartAlign technology is included on 4K sector drives. Both drives are functionally and physically equivalent.6Formerly Barracuda ®drive。
EN27C512中文资料(List Unclassifed)中文数据手册「EasyDatasheet - 矽搜」
4
芯片中文手册,看全文,戳
EN27C512
READ模式
该EN27C512具有两个控制功能,这两者必须逻辑满足以
获得在输出数据.芯片使能(
CE )是功率控制和应当用于
设备选择.输出使能(
OE )是输出控制和应使用栅极数据到
输出引脚,独立设备选择.假定地址是稳定,
地址访问时间(t
ACC )等于从延迟
在进入编程模式时12.75
± 0.25V被施加到
CE 是在V IL.用于编程,要编程数据被应用于与8位并行 数据引脚.
OE /VPP 销和
图5中QUIKRITE程TM序流程图显示EON交互式编程
算法.交互式算法采用20减少编程时间
编程脉冲和给每个地址仅尽可能多脉冲,是必要,以便
可靠地进行编程数据.之后每个脉冲被施加到一个给定地址,在该数据
30毫安操作(最大)
CMOS-和TTL兼容I / O
高可靠性CMOS技术
闭锁抗扰度100mA电流
从-1V到V CC + 1V二线控制(Βιβλιοθήκη OE & CE )
标准产品识别码
JEDEC标准引脚
28引脚PDIP
32引脚PLCC
28引脚TSOP(类型1)
商业和工业温度 范围
概述
所述EN27C512是一个低功率512Kbit,5V-只有一次性可编程(OTP)只读
芯片中文手册,看全文,戳
EN27C512 512KBIT EPROM (64K x 8)
EN27C512
特征
快速读取时间
:
-45,-55,-70,和-90ns
5V单电源供电
编程电压+ 12.75V
2.5英寸硬盘商品说明书
CONTINUED > 2.5-Inch HDD pg 2CONTINUED > 2.5-Inch SSD pg 3New Seagate Model Number Key, EnterpriseST 500 NM 123 1BRANDCAPACITYSEGMENTATTRIBUTESGENERATION2 letters ST = Seagate MX = Maxtor2 to 4 digits 500 = 500GB 1000 = 1000GBCapacities >9999GB:10 = 10TB 15 = 15TB2 lettersMM = Mission-Critical, 2.5-Inch, 10K MX = Mission-Critical, 2.5-Inch, 15K NM = Nearline, 3.5-Inch NX = Nearline, 2.5-Inch FM = SSD Mainstream FX = SSD Performance3 digits, non-intelligentVaries as needed, for example:Interface RPM Cache SED1 digit, intelligent 1 = 1st Generation2 = 2nd Generation3 = 3rd GenerationSeagate Partner Program MembersVisit the Sales Tools section to access the latest product roadmap, end-of-life schedule and product information. DistributorsEMEA SPP Support00-800-6890-8282US Sales Support1-800-SEAGATE or 1-405-324-4700Visit for more information or call 1-800-SEAGATE (1-800-732-4283) © 2012 Seagate Technology LLC. All rights reserved. Printed in USA. Seagate, Seagate Technology and the Wave logo are registered trademarksof Seagate Technology LLC in the United States and/or other countries. Cheetah, Constellation.2, Pulsar, Pulsar.2 and Savvio are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments. All other trademarks or registered trademarks are the property of their respective owners. When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit ). Seagate reserves the right to change, without notice, product offerings or specifications. QR501.17-1210US, October 20121 One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes when referring to hard drive capacity.2 Self-Encrypting Drives (SED) and FIPS 140-2 Validated drives are not available in all models or countries. May require TCG-compliant host or controller support.3 See FIPS 140-2 Level 2 Certificate at /groups/STM/cmvp/documents/140-1/1401val2010.htm#12994 Data provided is based on format at 512 bytes.View a brief training presentation on how our model number format has changed at /seagate/ModelNumber。
NS4205 3W双声道D类音频功放用户手册说明书
Nsiway
4
NS4205
3W双声道D类音频功放
1 功能说明
NS4205 是一款无需滤波器、D 类双声道音频功放。NS4205 采用先进的技术,在全带宽范围内极大 地降低了 EMI 干扰,最大限度地减少对其他部件的影响。NS4205 无需滤波器的 PWM 调制结构及反馈电 阻内置方式减少了外部元件、PCB 面积和系统成本。NS4205 内置过流保护、过热保护及欠压保护功能, 有效地保护芯片在异常工作状况下不被损坏。并且利用扩频技术充分优化全新电路设计,高达 90%的效 率更加适合便携式音频产品。
9 NS4205 应用说明............................................................................................................................................ 12
NS4205
3W双声道D类音频功放
NS4205 用户手册 V1.1
深圳市纳芯威科技有限公司 2012 年 02 月
Nsiway
1
日期
版本
作者
修改历史
NS4205
3W双声道D类音频功放
修改说明
Nsiway
2
NS4205
双声道D类音频功放
目录
1 功能说明 ........................................................................................................................................................... 5
ServeRAID 适配器快速参考 - System x 服务器参考信息说明书
ServeRAID Adapter Quick Reference for System x ServersReference InformationWhether you are protecting your storage network, enterprise databases, or application network, the ServeRAID family of SAS/SATA Controllers and Host Bus Adapters delivers benefits to fit your requirements. Combining these controllers with internal disk drives or external storage expansion unit increases storage capabilities.Table 1. Adapter positioningHost Bus Adapters Basic RAID (emphasis on cost)Enterprise RAID (emphasis onperformance)12 Gbps SAS N2215N2225N2226ServeRAID M1215ServeRAID M5225-2GBServeRAID M5210ServeRAID M5210e6 Gbps SAS N2125N2115IBM 6Gb PerformanceOptimized HBAIBM 6Gb SAS HBA ServeRAID M1115ServeRAID H1135ServeRAID H1110ServeRAID M1015ServeRAID M5120ServeRAID M5115ServeRAID M5110ServeRAID M5110eServeRAID M5025ServeRAID M5016ServeRAID M5015ServeRAID M50143 Gbps SAS ServeRAID BR10il v2 3 Gbps SATA ServeRAID C105ServeRAID C100Figure 1. ServeRAID M5225-2GB SAS/SATA ControllerFigure 2. ServeRAID M5210 SAS/SATA Controller (with an optional cache installed)Feature upgrade matrix for M5200 SeriesThe following table shows feature upgrade matrix for ServeRAID M5200 Series SAS/SATA controllers.Table 4. Feature upgrade matrix for ServeRAID M5200 Series SAS/SATA controllersFeature RAIDController Description Part number Type M5210M5210e Zero Cache RAID 5 and SED UpgradesServeRAID M5200 Series Zero Cache/RAID 5 Upgrade47C8708FoD Yes Cache, RAID 5 and SED Upgrades with no backupServeRAID M5200 Series 1GB Cache/RAID 5 Upgrade47C8656HW Yes Cache, RAID 5 and SED Upgrades with flash backupServeRAID M5200 Series 1GB Flash/RAID 5 Upgrade47C8660HW Yes ServeRAID M5200 Series 2GB Flash/RAID 5 Upgrade47C8664HW Yes ServeRAID M5200 Series 4GB Flash/RAID 5 Upgrade47C8668HW Yes Advanced Upgrades*ServeRAID M5200 Series RAID 6 Upgrade47C8706FoD Yes ServeRAID M5200 Series SSD Performance Accelerator47C8710FoD Yes ServeRAID M5200 Series SSD Caching Enabler47C8712FoD Yes* Advanced Upgrade requires cache upgradeFigure 3. ServeRAID M1215 SAS/SATA ControllerFigure 4. ServeRAID M5120 SAS/SATA Controller (with flash module)Figure 5. ServeRAID M5110 SAS/SATA Controller (with flash module)Figure 6. ServeRAID M1115 SAS/SATA ControllerFigure 7. ServeRAID H1110 SAS/SATA ControllerFigure 8. ServeRAID M5025 SAS/SATA ControllerFigure 9. ServeRAID M5016 SAS/SATA Controller (with flash module)Figure 10. ServeRAID M5015 SAS/SATA Controller with the battery backup unit attachedFigure 11. ServeRAID M5000 Series Advanced Feature Key attached to the ServeRAID M5015 ControllerFigure 12. ServeRAID M5014 SAS/SATA ControllerFigure 13. ServeRAID M1015 SAS/SATA ControllerFigure 15. ServeRAID-BR10il SAS/SATA Controller v2 (BR10il v2)ServeRAID C100 and C105The ServeRAID C100 and ServeRAID C105 are integrated SATA controllers with software RAID capabilities. They are a cost-effective way to provide reliability, performance, and fault-tolerant disk subsystem management to help safeguard your valuable data and enhance availability.The following figure shows a screenshot from the configuration utility for ServeRAID C100/C105 that displays information about the controller.Figure 16. ServeRAID C100/C105 configuration utility: Controller informationThe ServeRAID C100 and C105 are integrated SATA controllers that come standard with supported servers and cannot be ordered separately. The following table provides the ordering part numbers and feature codes for the additional options.Table 17. Ordering part numbers and feature codesDescription Part number Feature code ServeRAID C100Onboard Onboard ServeRAID C105Onboard Onboard ServeRAID C100 Series RAID 5 Upgrade-FoD*81Y4406A17U8-Pack ServeRAID C105 Controller Enabler**90Y4349A2V7* An FoD upgrade for ServeRAID C100 that enables support for RAID 5.** An FoD upgrade for ServeRAID C105 that enables support for up to eight SATA HDDs.ServeRAID C100 and C105 specificationsThe following table lists specifications for the ServeRAID C100 and C105 controllers.Figure 17. N2225 (left) and N2226 (right) SAS/SATA HBAsFigure 18. N2215 SAS/SATA HBAFigure 19. N2125 SAS/SATA HBAFigure 20. N2115 SAS/SATA HBAFigure 21. 6Gb SAS Host Bus Adapter with the PCIe slot bracket removedFigure 22. 6Gb Performance Optimized HBASupported serversThe following table lists supported System x servers.Table 28. Supported System x servers (Part 1)Serverx3100 M4Y N Y Y Y Y N N N Y Y x3100 M5N N N N N N N N Y Y N x3200 M2N N N N N N N N N Y N x3200 M3Y N Y Y Y Y N N N Y N x3250 M2N N N N N N N N N Y N x3250 M3Y N Y Y Y Y N N N Y N x3250 M4Y N Y Y Y Y N N N Y Y x3250 M5N N N N N N N Y Y N N x3300 M4N N N N N N N N N Y Y x3400 M2Y N Y Y Y Y N N N Y N x3400 M3Y N Y Y Y Y N N N Y N x3500 M2Y N Y Y Y N N N N Y N x3500 M3Y N Y Y Y N N N Y Y N x3500 M4N N N N N N Y*Y*Y Y Y x3530 M4N N N N N N N Y*N Y Y x3550 M2Y N Y Y Y N N N N Y Y x3550 M3Y Y Y Y Y Y N N N Y Y x3550 M4N N N N N N N Y*Y Y Y x3550 M5N N N N N N Y Y N N N x3620 M3N N Y Y Y Y N N N Y N x3630 M3N N Y Y Y N N N N Y N x3630 M4N N N N N N Y*Y*Y Y Y x3650 M2Y N Y Y Y N N N N Y Y x3650 M3Y Y Y Y Y Y N N N Y Y x3650 M4N N N N N N Y*Y*Y Y Y x3650 M4 BD N N N N N N Y Y Y N N x3650 M4 HD N N N N N N Y Y N N N x3650 M5N N N N N N Y Y N N N x3690 X5Y Y**Y Y Y N N N N Y Y x3750 M4 (8722)N N N N N N N N Y Y Y x3750 M4 (8752)N N N N N N N N Y N N x3755 M3N N Y Y Y N N N N Y N x3850 M2/x3950 M2N N N N N N N N N Y Y x3850 X5/x3950 X5Y Y**Y Y Y N N N Y Y Y x3850 X6/x3950 X6N N N N N N N Y Y N N* Supported with Intel Xeon v2 processors.** Supported with Intel Xeon E7 family-based eX5 servers, requires optional M5016 Battery Tray (88Y5874).Table 28. Supported System x servers (Part 2)Server x3100 M4N N N N N N N N Y N Y N N x3100 M5N N N N Y Y N Y Y N Y N Y x3200 M2N N N N N N N N N N N N N x3200 M3N N N N N N N N Y N N N N x3250 M2N N N N N N N N N N N N N x3250 M3N N N N N N N N Y N N N N x3250 M4N N N N N N N N Y N Y N N x3250 M5N N N N Y Y N Y Y N Y N Y x3300 M4N N N N Y Y N Y Y Y N N N x3400 M2N N N N N N N N N N N N N x3400 M3N N N N N N N N Y N N N N x3500 M2N N N N N N N N N N N N N x3500 M3N N N N N N N N Y N N N N x3500 M4N Y N Y Y Y N Y N N N Y Y x3530 M4N N N N Y Y N Y Y Y N N N x3550 M2N N N N N N N N N N N N N x3550 M3N N N N N N N N Y N N N N x3550 M4N Y N Y Y Y N Y N N N Y Y x3550 M5Y Y N Y N N N N N N N Y N x3620 M3N N N N N N N N Y N N N N x3630 M3N N N N N N N N N N N N N x3630 M4N N N N Y Y N Y Y Y N N Y x3650 M2N N N N N N N N N N N N N x3650 M3N N N N N N N N Y N N N N x3650 M4N Y N N Y Y Y N N N N Y Y x3650 M4 BD N Y N Y Y Y N Y Y N N Y Y x3650 M4 HD N Y Y N N N N N Y N N Y N x3650 M5Y Y N Y N N N N N N N Y N x3690 X5N N N N N N N N N N N N Y x3750 M4 (8722)N N N N Y Y Y Y Y N N N Y x3750 M4 (8752)N Y Y Y Y N N N N N N Y N x3755 M3N N N N N N N N N N N N N x3850 M2/x3950 M2N N N N N N N N N N N N N x3850 X5/x3950 X5N N N N N N N N N N N N Y x3850 X6/x3950 X6NYNNYNNNNNNYNThe following table lists supported iDataPlex and NeXtScale servers.Table 29. Supported iDataPlex and NeXtScale servers (Part 1)Server dx320N N N N N N N N N N N N dx340N N N N N N N N N N N N dx360N N N N N N N N N N N N dx360 M2N N N N N N N N N N N N dx360 M3N N Y N Y N N N N N Y N dx360 M4N N N N N N Y N N N Y Y nx360 M4N N N N N N N Y Y Y N N nx360 M5NNNNNNNNNNNNTable 29. Supported iDataPlex and NeXtScale servers (Part 2)Server dx320N N N N N N N N N N N N N dx340N N N N N N N N N N N N N dx360N N N N N N N N N N N N N dx360 M2N N N N N N N N N N N N N dx360 M3N N N N N N N N Y N N N N dx360 M4N Y N N Y N N Y Y N N N N nx360 M4N N N N Y Y N Y Y N Y N Y nx360 M5NYNYNNNNNNNYNThe following table lists supported BladeCenter servers.Table 30. Supported BladeCenter serversServer HS12 (8028)N N N HS22 (7870)N N N HS22V (7871)N N N HS23 (7875)N N N HS23E (8038)N Y Y HX5 (7872)N N N HX5 (7873)NNNThe following table lists supported Flex System servers.Table 31. Supported Flex System serversServerx220Y Y Y N x222N N N Y x240Y N N N x240 M5N N N N x440Y N N N x280/x480/x880 X6N N N NFeature comparisonThe following tables compare features of the storage controllers.Table 32. Feature comparison: Controllers for System x, iDataPlex, and NeXtScale servers (Part 1)FeaturePort interface SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS SAS Port speed, Gbps6666631212666 Number of ports888884168888 PCIe spec 2.0 2.0 2.0 2.0 2.0 1.0 3.0 3.0 3.0 2.0 2.0 PCIe lanes x8x8x8x8x8x4x8x8x8x8x8 Int. connectors022******** Ext. connectors20000042210 SAS controller LSISAS2108LSISAS2208LSISAS2108LSISAS2108LSISAS2008LSISAS1064LSISAS3008LSISAS3008LSISAS2308LSISAS2008LSISAS2008 Cache (MB)#5121024512256None None None None None None None Battery backup Y N Y Opt N N N N N N N Flash backup N Y N N N N N N N N N Data encryption Opt Y Opt Opt Opt N N N N N N Max stripe size (KB) (F=fixed)10241024102410246464-F N/A N/A N/A N/A N/A Mixing SAS & SATA‡Y Y Y Y Y Y N/A N/A N/A N/A N/A SSD support Y Y Y Y Y Y Y Y N N Y Tape support N N N N N N N N N Y N Max volumes64646464162N/A N/A N/A N/A N/A Max volume size64TB64TB64TB64TB64TB Y N/A N/A N/A N/A N/A UEFI support Y Y Y Y Y Y Y Y Y Y Y Patrol read (data scrubbing)Y Y Y Y Y Y N/A N/A N/A N/A N/A Consistency check Y Y Y Y Y N/A N/A N/A N/A N/A Online RAID Level Migration†Y Y Y Y Y N/A N/A N/A N/A N/A Online Capacity Expansion Y Y Y Y Y N/A N/A N/A N/A N/A AutoSync (auto-rebuild)Y Y Y Y Y Y N/A N/A N/A N/A N/A Copyback§Y Y Y Y N N N/A N/A N/A N/A N/A FastPath Opt N Opt Opt N N N/A N/A N/A N/A N/A CacheCade Opt N Opt Opt N N N/A N/A N/A N/A N/A RAID-0Y Y Y Y Y Y N/A N/A N/A N/A N/A RAID-1Y Y Y Y Y Y N/A N/A N/A N/A N/A RAID-1E N N N N N Y N/A N/A N/A N/A N/A RAID-5Y Y Y Y Opt N N/A N/A N/A N/A N/A RAID-6Opt Y Opt Opt N N N/A N/A N/A N/A N/A RAID-10Y Y Y Y Y N N/A N/A N/A N/A N/A RAID-50Y Y Y Y Opt N N/A N/A N/A N/A N/A RAID-60Opt Y Opt Opt N N N/A N/A N/A N/A N/A# Opt=optional‡ Requires that the server also supports the mixing of SAS & SATA drives.† Online RAID Level Migration (RLM) is also known as Logical Drive Migration (LDM).§ Copyback is also known as Revertible Hot Spare.Table 32. Feature comparison: Controllers for System x, iDataPlex, and NeXtScale servers (Part 2)FeaturePort interface SAS SAS SAS SAS SAS SAS SAS SATA SATA SAS SAS Port speed, Gbps121212666633126 Number of ports88888848Up to688 PCIe spec 3.0 3.0 3.0 3.0 3.0 2.0 2.0N/A N/A 3.0 3.0 PCIe lanes x8x8x8x8x8x8x4N/A N/A x8x8 Int. connectors02202222Up to622 Ext. connectors20020000000 SAS controller LSISAS3108LSISAS3108LSISAS3008LSISAS2208LSISAS2208LSISAS2008LSISAS2004None None LSISAS3008LSISAS2308 Cache (MB)# 2 GB Opt N Opt Opt N N N N N N Battery backup N N N Opt Opt N N N N N N Flash backup Yes Opt N Opt Opt N N N N N N Data encryption Yes Opt Opt Opt Opt Opt N N N N N Max stripe size (KB) (F=fixed)1024102464-F1024102464-F64-F64-F64-F N/A N/A Mixing SAS & SATA‡Y Y Y Y Y Y Y N N Y Y SSD support Y Y Y Y Y Y Y N N Y Y Tape support N N N N N N N N Y N N Max volumes646432646416288N/A N/A Max volume size64TB64TB>2TB64TB64TB64TB16TB>2TB>2TB N/A N/A UEFI support Y Y Y Y Y Y Y Y Y Y Y Patrol read (data scrubbing)Y Y Y Y Y Y N N N N/A N/A Consistency check Y Y Y Y Y Y Y Y Y N/A N/A Online RAID Level Migration†Y Y Y Y Y Y N N N N/A N/A Online Capacity Expansion Y Y Y Y Y Y Y N N N/A N/A AutoSync (auto-rebuild)Y Y Y Y Y Y Y Y Y N/A N/A Copyback§Y Y Y Y Y Y N N N N/A N/A FastPath Opt Opt N Opt Opt N N N N N/A N/A CacheCade Opt Opt N Opt Opt N N N N N/A N/A RAID-0Y Y Y Y Y Y Y Y Y N/A N/A RAID-1Y Y Y Y Y Y Y Y Y N/A N/A RAID-1E N N N N N N Y N N N/A N/A RAID-5Y Opt Opt Opt Opt Opt N N N N/A N/ARAID-6Opt OptNOptOpt NN NN N/AN/ARAID-10Y Y Y Y Y Y Y Y Y N/A N/A RAID-50Y Opt Opt Opt Opt Opt N N N N/A N/A RAID-60Opt Opt N Opt Opt N N N N N/A N/A Feature# Opt=optional‡ Requires that the server also supports the mixing of SAS & SATA drives.† Online RAID Level Migration (RLM) is also known as Logical Drive Migration (LDM).§ Copyback is also known as Revertible Hot Spare.Table 33. Feature comparison: ServeRAID controllers for BladeCenter and Flex System servers。
红苹果PE512X说明书
5.1.2.2 云台操作 .................. 28 5.1.3 直接控制 DVR 的键盘连线.............. 29 5.1.4 直接控制录像机的操作 ............ 30 5.2 作为 PE40/50/50M 本地键盘.................. 31 5.2.1 作为 PE40/50/50M 本地键盘接线........ 31
4
技术服务热线 8008571727
PE512x 控制键盘说明书(Ver2.0) 第六章 辅助设置 .................................. 6.1 FUN 操作 ................................. 6.2 宏指令操作 ............................... 6.2.1 宏键盘软件设置...................... 6.2.1.1 宏指令编辑的界面介绍 ......... 6.2.1.2 宏记录的增加 ................. 6.2.1.3 宏记录的修改 ................. 6.2.1.4 宏记录的删除 ................. 6.2.1.5 为宏记录增加操作命令 ......... 6.2.1.5.1 添加一个操作命令 ....... 6.2.1.5.2 插入一个操作命令 ....... 6.2.1.5.3 修改一个操作命令 ....... 6.2.2 CAM 表操作.......................... 6.2.3 编辑 CAM 表.......................... 6.2.3.1 站点编辑...................... 6.2.3.2 干线编辑...................... 6.2.3.3 CAM 的逻辑编号与物理编号的编辑 6.2.3.4 站点组织 ..................... 6.2.4 下载数据............................ 6.2.4.1 下载宏数据的通信设置.......... 6.2.4.2 PC 的串口与键盘的连接......... 6.2.4.3 下载宏数据到键盘.............. 6.3 键盘软件升级 ............................. 1 基本图标说明 ............................... 2 键盘出厂设置 ............................... 3 常用操作 ................................... 常用按键操作功能 ......................... 4 用户操作选项速查 ........................... 46 46 47 47 47 48 48 48 48 49 49 50 50 50 51 52 52 53 54 54 55 55 56 57 59 60 60 62
NRL512说明书
用户必读感谢您使用浙江南瑞电力自动化有限公司生产的NRX-500系列微机保护装置。
在安装和使用本系列装置前,请您注意以下提示:➢收到装置后,请核对与您所订购之型号、规格是否相符;➢装置的额定参数、操作电源电压是否符合使用要求;➢请检查装置是否存在外观损伤,配套的说明书、出厂检验报告、合格证、接线端子台及安装附件是否齐全;➢在安装、调试前请仔细阅读本说明书,并按照说明书的指引进行安装、测试和使用;➢该装置由电子器件构成,为防止装置损坏,严禁私自拆卸装置插件及带电插拔外部接线端子;➢请使用合格的测试仪器和设备对装置进行试验和检测;➢装置在测试和使用时,接地端子(B15)及外壳要可靠接地;➢装置安装完毕后,请仔细检查接线,确定正确后方可通电调试,以免造成产品的损坏;➢装置出厂密码是:0000,此密码可在系统参数中修改,修改后请注意保存,以免遗失;➢装置不可在运行状态下修改保护定值,修改定值时要“先整定定值,后投入保护功能”以免造成误动作。
目录一概述 (1)1.1适用范围 (1)1.2功能配置 (1)二、技术参数 (2)2.1工作环境条件 (2)2.2额定电气参数 (2)2.3主要技术指标 (3)三、保护原理(逻辑图) (4)四、结构和开孔尺寸 (8)五、接线端子定义 (9)六、操作说明 (10)6.1面板说明 (10)6.2正常运行状态 (11)6.3主菜单 (11)6.4采样数据 (12)6.5定值整定 (13)6.6系统参数 (14)6.7时钟 (14)6.8历史事件 (15)6.9传动试验 (15)七、定值清单 (16)7.1NRL-511定值清单 (16)7.2NRL-512定值清单 (18)八、系统参数清单 (19)九、调试大纲 (20)9.1装置通电前的检查 (20)9.2装置接线说明 (20)9.3装置通电检查 (20)9.4开入、开出回路的检查 (21)9.5定值的设置 (21)9.6整组试验 (21)9.7其它注意事项 (21)十、常见故障排除 (21)十一、三包服务 (22)十二、接线原理图 (22)一概述1.1 适用范围NRL-51X系列数字线路保护测控装置适用于110kV及以下电压等级的经消弧线圈接地或不接地系统中,可集中组屏,也可在开关柜就地安装,全面支持变、配电所综合自动化系统。
Moxa EDS-G512E Series 12G-port 全 gigabit 管理交换机 产品特
EDS-G512E Series12G-port(with8PoE+ports option)full Gigabit managed EthernetswitchesFeatures and Benefits•8IEEE802.3af and IEEE802.3at PoE+standard ports•36-watt output per PoE+port in high-power mode•Turbo Ring and Turbo Chain(recovery time<50ms@250switches),RSTP/ STP,and MSTP for network redundancy•RADIUS,TACACS+,MAB Authentication,SNMPv3,IEEE802.1X,MAC ACL, HTTPS,SSH,and sticky MAC-addresses to enhance network security •Security features based on IEC62443•EtherNet/IP,PROFINET,and Modbus TCP protocols supported for device management and monitoring•Supports MXstudio for easy,visualized industrial network management•V-ON™ensures millisecond-level multicast data and video network recoveryCertificationsIntroductionThe EDS-G512E Series is equipped with12Gigabit Ethernet ports and up to4fiber-optic ports,making it ideal for upgrading an existing network to Gigabit speed or building a new full Gigabit backbone.It also comes with810/100/1000BaseT(X),802.3af(PoE),and802.3at(PoE+)-compliant Ethernet port options to connect high-bandwidth PoE devices.Gigabit transmission increases bandwidth for higher performance and transfers large amounts of triple-play services across a network quickly.Redundant Ethernet technologies such as Turbo Ring,Turbo Chain,RSTP/STP,and MSTP increase the reliability of your system and improve the availability of your network backbone.The EDS-G512E Series is designed specifically for communication demanding applications,such as video and process monitoring,ITS,and DCS systems,all of which can benefit from a scalable backbone construction.Additional Features and Benefits•Command line interface(CLI)for quickly configuring majormanaged functions•Advanced PoE management function(PoE port setting,PD failurecheck,and PoE scheduling)•DHCP Option82for IP address assignment with different policies•Supports EtherNet/IP,PROFINET,and Modbus TCP protocols fordevice management and monitoring•IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN,IEEE802.1Q VLAN,and GVRP to ease networkplanning•Supports the ABC-02-USB(Automatic Backup Configurator)forsystem configuration backup/restore and firmware upgrade•Port mirroring for online debugging•QoS(IEEE802.1p/1Q and TOS/DiffServ)to increase determinism•Port Trunking for optimum bandwidth utilization•RADIUS,TACACS+,MAB Authentication,SNMPv3,IEEE802.1X,MACACL,HTTPS,SSH,and sticky MAC address to enhance networksecurity•SNMPv1/v2c/v3for different levels of network management•RMON for proactive and efficient network monitoring•Bandwidth management to prevent unpredictable network status•Lock port function for blocking unauthorized access based on MACaddress•Automatic warning by exception through email and relay outputSpecificationsInput/Output InterfaceAlarm Contact Channels1Relay output with current carrying capacity of1A@24VDCButtons Reset buttonDigital Input Channels1Digital Inputs+13to+30V for state1-30to+3V for state0Max.input current:8mAEthernet Interface10/100/1000BaseT(X)Ports(RJ45connector)EDS-G512E-4GSFP:8Auto negotiation speedFull/Half duplex modeAuto MDI/MDI-X connectionEDS-G512E-4GSFP-T:8Auto negotiation speedFull/Half duplex modeAuto MDI/MDI-X connectionPoE Ports(10/100/1000BaseT(X),RJ45connector)EDS-G512E-8PoE-4GSFP:8EDS-G512E-8PoE-4GSFP-T:8100/1000BaseSFP Slots4Standards IEEE802.3for10BaseTIEEE802.3u for100BaseT(X)and100BaseFXIEEE802.3ab for1000BaseT(X)IEEE802.3z for1000BaseSX/LX/LHX/ZXIEEE802.3x for flow controlIEEE802.1D-2004for Spanning Tree ProtocolIEEE802.1w for Rapid Spanning Tree ProtocolIEEE802.1s for Multiple Spanning Tree ProtocolIEEE802.1p for Class of ServiceIEEE802.1Q for VLAN TaggingIEEE802.1X for authenticationIEEE802.3ad for Port Trunk with LACP Ethernet Software FeaturesFilter802.1Q VLANBPDU FilterBPDU GuardGMRPGVRPIGMP v1/v2/v3Port-based VLANIndustrial Protocols EtherNet/IPModbus TCPPROFINET IO DeviceManagement LLDPBack Pressure Flow ControlBOOTPPort MirrorDHCP Option66/67/82DHCP Server/ClientFiber checkFlow controlIPv4/IPv6RARPRMONSCPSMTPSNMP InformSNMPv1/v2c/v3SyslogTelnetTFTPMIB Ethernet-like MIBMIB-IIBridge MIBP-BRIDGE MIBQ-BRIDGE MIBRMON MIB Groups1,2,3,9RSTP MIBRedundancy Protocols Link AggregationMRPMSTPRSTPSTPTurbo ChainTurbo Ring v1/v2Security Broadcast storm protectionHTTPS/SSLTACACS+SNMPv3MAB authenticationSticky MACNTP authenticationMAC ACLPort LockRADIUSSSHSMTP with TLSTime Management NTP Server/ClientSNTPSwitch PropertiesIGMP Groups2048Jumbo Frame Size9.6KBMAC Table Size8KMax.No.of VLANs256Packet Buffer Size4MbitsPriority Queues4VLAN ID Range VID1to4094USB InterfaceStorage Port USB Type ALED InterfaceLED Indicators PWR1,PWR2,STATE,FAULT,10/100M(TP port),1000M(TP port),100/1000M(SFPport),MSTR/HEAD,CPLR/TAIL,smart PoE LED(EDS-G512E-8PoE-4GSFP Series only) Serial InterfaceConsole Port USB-serial console(Type B connector)DIP Switch ConfigurationDIP Switches Turbo Ring,Master,Coupler,ReservePower ParametersConnection2removable4-contact terminal block(s)Input Current EDS-G512E-4GSFP models:0.34A@24VDCEDS-G512E-8PoE-4GSFP models:5.30A@48VDCInput Voltage EDS-G512E-4GSFP models:12/24/48/-48VDCEDS-G512E-8PoE-4GSFP models:48VDCRedundant dual inputsOperating Voltage EDS-G512E-4GSFP models:9.6to60VDCEDS-G512E-8PoE-4GSFP models:44to57VDC(>50VDC for PoE+outputrecommended)Overload Current Protection SupportedReverse Polarity Protection SupportedPower Budget EDS-G512E-8PoE-4GSFP:Max.240W for total PD consumptionEDS-G512E-8PoE-4GSFP:Max.36W for each PoE portPower Consumption(Max.)EDS-G512E-8PoE-4GSFP:Max.14.36W full loading without PDs’consumptionEDS-G512E-8PoE-4GSFP-T:Max.14.36W full loading without PDs’consumptionEDS-G512E-8PoE-4GSFP:When selecting a power supply,check the PD powerconsumption.EDS-G512E-8PoE-4GSFP-T:When selecting a power supply,check the PD powerconsumption.Physical CharacteristicsHousing MetalIP Rating IP30Dimensions79.2x135x137mm(3.1x5.3x5.4in)Weight EDS-G512E-4GSFP:1,440g(3.18lb)EDS-G512E-8PoE-4GSFP:1,540g(3.40lb)Installation DIN-rail mountingWall mounting(with optional kit)Environmental LimitsOperating Temperature Standard Models:-10to60°C(14to140°F)Wide Temp.Models:-40to75°C(-40to167°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsSafety EDS-G512E-4GSFP/EDS-G512E-8PoE-4GSFP models:UL508EDS-G512E-8PoE-4GSFP models:EN60950-1(LVD)EMC EN61000-6-2/-6-4EMS EDS-G512E-4GSFP:IEC61000-4-2ESD:Contact:8kV;Air:15kVEDS-G512E-4GSFP:IEC61000-4-3RS:80MHz to1GHz:10V/mEDS-G512E-8PoE-4GSFP:IEC61000-4-3RS:80MHz to1GHz:20V/mEDS-G512E-4GSFP-T:IEC61000-4-3RS:80MHz to1GHz:10V/mEDS-G512E-8PoE-4GSFP-T:IEC61000-4-3RS:80MHz to1GHz:20V/mEDS-G512E-4GSFP:IEC61000-4-4EFT:Power:4kV;Signal:4kVEDS-G512E-8PoE-4GSFP:IEC61000-4-4EFT:Power:2kV;Signal:2kVEDS-G512E-8PoE-4GSFP-T:IEC61000-4-4EFT:Power:2kV;Signal:2kVEDS-G512E-4GSFP-T:IEC61000-4-4EFT:Power:4kV;Signal:4kVEDS-G512E-4GSFP:IEC61000-4-5Surge:Power:4kV;Signal:4kVEDS-G512E-8PoE-4GSFP:IEC61000-4-5Surge:Power:2kV;Signal:4kVEDS-G512E-4GSFP:IEC61000-4-5Surge:Power:4kV;Signal:4kVEDS-G512E-4GSFP-T:IEC61000-4-5Surge:Power:4kV;Signal:4kVEDS-G512E-8PoE-4GSFP:IEC61000-4-5Surge:Power:2kV;Signal:2kVEDS-G512E-8PoE-4GSFP-T:IEC61000-4-5Surge:Power:2kV;Signal:2kVIEC61000-4-6CS:10VIEC61000-4-8PFMFEMI FCC Part15B Class AHazardous Locations EDS-G512E-4GSFP Series:ATEX,Class I Division2Maritime EDS-G512E-4GSFP models:DNV,LR,ABS,NKPower Substation IEC61850-3IEEE1613Railway EN50121-4Traffic Control EDS-G512E-4GSFP:NEMA TS2Shock IEC60068-2-27Freefall IEC60068-2-32Vibration IEC60068-2-6MTBFTime EDS-G512E-4GSFP(-T)models:816,823hrsEDS-G512E-8PoE-4GSFP(-T)models:788,215hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x EDS-G512E Series switchCable1x USB type A male to USB type B maleInstallation Kit4x cap,plastic,for RJ45portDocumentation1x quick installation guide1x warranty card1x product certificates of quality inspection,Simplified Chinese1x product notice,Simplified ChineseNote SFP modules need to be purchased separately for use with this product. DimensionsOrdering InformationEDS-G512E-4GSFP8––4-10to60°C EDS-G512E-4GSFP-T8––4-40to75°C EDS-G512E-8PoE-4GSFP–8✓4-10to60°C EDS-G512E-8PoE-4GSFP-T–8✓4-40to75°C Accessories(sold separately)Storage KitsABC-02-USB Configuration backup and restoration tool,firmware upgrade,and log file storage tool for managedEthernet switches and routers,0to60°C operating temperatureABC-02-USB-T Configuration backup and restoration tool,firmware upgrade,and log file storage tool for managedEthernet switches and routers,-40to75°C operating temperatureRack-Mounting KitsRK-4U19-inch rack-mounting kitWall-Mounting KitsWK-51-01Wall mounting kit with2plates(51.6x67x2mm)and6screwsSFP ModulesSFP-1FELLC-T SFP module with1100Base single-mode with LC connector for80km transmission,-40to85°Coperating temperatureSFP-1FEMLC-T SFP module with1100Base multi-mode,LC connector for2/4km transmission,-40to85°C operatingtemperatureSFP-1FESLC-T SFP module with1100Base single-mode with LC connector for40km transmission,-40to85°Coperating temperatureSFP-1G10ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G10ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G10BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G10BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G20ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G20ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G20BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G20BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G40ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G40ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G40BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G40BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1GEZXLC SFP module with11000BaseEZX port with LC connector for110km transmission,0to60°C operatingtemperatureSFP-1GEZXLC-120SFP module with11000BaseEZX port with LC connector for120km transmission,0to60°C operatingtemperatureSFP-1GLHLC SFP module with11000BaseLH port with LC connector for30km transmission,0to60°C operatingtemperatureSFP-1GLHLC-T SFP module with11000BaseLH port with LC connector for30km transmission,-40to85°C operatingtemperatureSFP-1GLHXLC SFP module with11000BaseLHX port with LC connector for40km transmission,0to60°C operatingtemperatureSFP-1GLHXLC-T SFP module with11000BaseLHX port with LC connector for40km transmission,-40to85°Coperating temperatureSFP-1GLSXLC SFP module with11000BaseLSX port with LC connector for1km/2km transmission,0to60°Coperating temperatureSFP-1GLSXLC-T SFP module with11000BaseLSX port with LC connector for1km/2km transmission,-40to85°Coperating temperatureSFP-1GLXLC SFP module with11000BaseLX port with LC connector for10km transmission,0to60°C operatingtemperatureSFP-1GLXLC-T SFP module with11000BaseLX port with LC connector for10km transmission,-40to85°C operatingtemperatureSFP-1GSXLC SFP module with11000BaseSX port with LC connector for300m/550m transmission,0to60°Coperating temperatureSFP-1GSXLC-T SFP module with11000BaseSX port with LC connector for300m/550m transmission,-40to85°Coperating temperatureSFP-1GZXLC SFP module with11000BaseZX port with LC connector for80km transmission,0to60°C operatingtemperatureSFP-1GZXLC-T SFP module with11000BaseZX port with LC connector for80km transmission,-40to85°C operatingtemperatureSFP-1GTXRJ45-T SFP module with11000BaseT port with RJ45connector for100m transmission,-40to75°C operatingtemperatureSoftwareMXview-50Industrial network management software with a license for50nodes(by IP address)MXview-100Industrial network management software with a license for100nodes(by IP address)MXview-250Industrial network management software with a license for250nodes(by IP address)MXview-500Industrial network management software with a license for500nodes(by IP address)MXview-1000Industrial network management software with a license for1000nodes(by IP address)MXview-2000Industrial network management software with a license for2000nodes(by IP address)MXview Upgrade-50License expansion of MXview industrial network management software by50nodes(by IP address)©Moxa Inc.All rights reserved.Updated May11,2023.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
HRD-512C调度机简介
调度机简介根据贵单位需求,我公司在项目改造方案中采用数字调度程控交换机作为方案中核心设备。
数字调度程控调度机是由我公司自行研制和开发的新一代可编程通信交换控制系统。
该系统采用标准机柜结构,集控制,管理和维护于一体,在Windows 界面下提供智能菜单操作方式,因此安装容易,操作简单,用户不需要特殊的专业知识即可使用和维护。
该系统除了基本的交换功能外,还为用户提供了完善的语音服务功能。
用户可以根据需要自行定义和更换各类语音信息,以及服务方式。
既方便了客户的需要,又减轻了管理人员的工作强度,同时也降低了管理成本。
一、需求分析●调度专网专用,保证安全性、保密性、可靠性,可选择性的与其它通信网隔离。
●保证系统内部专用通道畅通,又要便于生产调度通信系统与外界联系沟通。
●尽量减少设备的后续维护费用。
●建设统一的通信平台,达到资源共享。
●多网合一,同时满足数据、话音业务。
●组织生产、及各调度岗位调度会议。
二、项目改造设备组成及功能本方案中改造项目工程的调度系统由512全数字调度交换主机、调度台、调度主机电源系统、维护系统、录音系统、配线部份等组成。
2.1 全数字调度主机设备512系列调度机采用标准模块化结构,所有外围电路板插槽可根据不同要求任意配置接口板。
512系列调度机采用了通用端口设计,允许任何用户板、中继板、信令板插在任何插槽上。
512满配置512端口,最大32个插槽。
2.1.1 512主机技术特点●系统的控制方式是由中央处理机和各单板处理机组成的功能分担的并行处理分级控制方式。
这样可以充分发挥各单板处理机的作用,增强事件处理的实时性,减少中央处理机的负担。
除中央处理机外,各单板处理机如有故障,影响面小,提高了系统的可靠性,而中央处理机又是双套热备份,这样就更加减少了系统故障的可能性。
●中央处理机采用美国原装的嵌入式工控级处理器系统。
●不仅中央处理机、交换网络采用了热备份,而且二次电源板,键盘接口板信号板等所有的公共资源也采用了热备份工作方式。