模具部件术语（冲模）（Terminologyofdiecomponents（die））

模具部件术语(冲模)（Terminology of die components (die)）
The die component terminology (die).Txt point is smoke, but it is lonely...... It's not that you don't laugh! People are not smart, but also learn bald. If you can't tie my heart, don't say I'm a playboy! No matter how outstanding Chopin, also can not play Lao Tzu sadness! Be happy when you're alive, because we're dying for a long time. Please don't speak English in front of me, OK?
Upper die: the upper die is the upper half of the whole stamping die, which is the die part which is installed on the slide block of the press.
Upper die seat: the upper die seat is the upper part of the upper die plate, the workpiece close to the press slider, and through the die handle or directly with the press slider fixed.
Lower die: the lower die is the lower part of the whole die, which is the part of the die on the working surface of the press
Upper die: the upper die is the upper half of the whole stamping die, which is the die part which is installed on the slide block of the press.
Upper die seat: the upper die seat is the upper part of the upper die plate, the workpiece close to the press slider, and through the die handle or directly with the press slider fixed.
Lower die: the lower die is the lower part of the whole stamping die, which is the die part which is installed on the working table of the press.
Lower die seat: the lower die seat is a plate shaped part at the bottom of the lower die, and it is directly fixed on the worktable or backing plate of the press when it is working.
Edge: the edge of the cutting edge is the side wall of the cutting hole.
Cutting edge inclination: cutting edge inclination is each side slope blanking die hole Renbi.
Air cushion: air cushion is the ejector with compressed air as its motive force.
The reverse side pressure block: the reverse side pressure block is the part that supports the one-way punch from the other side of the work face.
Guide sleeve: the guide sleeve is a tubular part which provides precise guidance for the relative movement of the upper and lower die seats. Most of the guide sleeves are fixed in the upper die seat and are matched with the guide posts fixed on the lower die seat.
Guide plate: the guide plate is a plate shaped part with a precision internal hole matching with the punch, which is used to ensure the mutual alignment between the punch and the die, and to perform the unloading (piece) function.
Guide pillar: the guide column is a cylindrical part that provides precise guidance for the relative movement of the
upper and lower die seats, most of which are fixed on the lower die seat and are matched with the guide sleeve fixed on the upper die seat.
Guide pin guide pin is guided into material hole is in the concave die location within the pin shaped parts.
Guide plate: guide die: die plate is guided by the guide plate, the die does not separate from the guide plate when used.
Guide plate: guide plate is a guide bar (belt, coil) material into the concave die plate shaped guide parts.
Guide post mould frame: guide pillar mould frame is a mould frame which guides each other and guides each other.
Die: stamping die is installed in the press for the production of stamping process equipment, by the coordination of the upper and lower parts of the two components.
Punch: the punch is a convex working part that directly forms the stamping part in the die, that is, the part with the shape as the working surface.
Concave die: the concave die is the concave working part that directly forms the punching part in the die, that is, the inner part is the part of the working surface.
Protective board: protective board is a kind of plate part that prevents the finger or foreign body from entering the dangerous area of the die.
The press plate (ring): the press plate (ring) is used to press the stamping material or process parts to control the material flow in the stamping die. In the drawing die, most of the press plate is called the pressing ring.
Drawbead drawbead: with rib protuberance to control the material flow by drawing die or drawing die, drawbead can be local structure of die or binder, can also be inserted into separate parts or die pressing in the circle.
Pressing sill: the pressing sill is a special pressing bar with rectangular section.
Bearing plate: bearing plate is used to connect the concave die plane, supporting stamping material plate shaped parts.
Side blade: the side blade is a punch that cuts out the feeding positioning notch on the side of the strip (strip, roll).
Side pressure plate: the side pressure plate is the plate part of the strip (belt, coil) material exerting pressure on the other side through the spring, prompting the other side to close the guide plate.
Ejector rod: the top rod is a rod-shaped component that directly or indirectly ejector the workpiece or material by upward action.
Gear ring: gear ring is a ring shaped tooth protrusion on a fine blanking die or a toothed press plate. It is the local structure
of a die or a toothed plate, rather than a single part.
Limit sleeve: the limiting sleeve is a tubular part used to limit the minimum closing height of the die. It is usually outside the guide pillar.
Limit column: the limit column is the column part that limits the minimum closing height of the die.
Positioning pin (plate): positioning pin (plate) is to ensure that the workpiece has a constant position in the mold parts, and its shape is called the positioning pin or positioning plate.
Fixing plate: the fixed plate is the plate shaped part of the fixed punch.
Fixed stripper plate: fixed stripper plate is fixed on the stamping die position of the stripper plate.
Fixed retaining pin (plate): fixed retaining pin (plate) is fixed fixed pin (plate) in the mold.
Unloading device: the unloading device is a non plate part or device that unloads the workpiece from the outer surface of the punch.
Stripper plate: the stripper plate is a stationary or movable plate shaped part that unloads or unloads material or work (piece) from the punch. Unloading plate is sometimes integrated with the guide plate, and play a guiding role, still known as
stripper plate.
Unloading screw unloading screw is fixed on the screw and plate spring, rest position for limiting spring stripper plate.
Scrap cutter: there are two kinds of scrap cutters. 1. deep drawing flange trimming die for cutting the whole circle trimming cutter to facilitate the removal of waste. 2. mounted on a press or die for cutting strips (strips, coils) of waste in a fixed length to clear away the cutters.
The starting stopper (plate): the starting stopper pin (plate) is the part used for locating the starting end of the material. The starting stop pin (plate) is mobile.
Block: the block is composed of a complete die, punch, stripper plate or fixed plate and other parts.
Block (plate): block (plate) is a hardened part used for positioning when the material is cut off by the side edge of the side of the cutter, and the single side cutting force is balanced by the balancing side blade. The block (plate) is commonly used with the side blade.
Retaining pin (plate): stopper pin (plate) is the material along the feeding direction of the positioning parts, with its different shape and called the pin or baffle plate. The retaining pin (plate) is the general name of the fixed retaining pin (plate), movable stopper pin (plate), starting block pin (plate) and so on.
Plate: plate is between the fixed plate (or die) and the mold seat between the quenching plate shape parts, used to reduce die under unit compressive stress.
Compound die: the compound die is a die which completes two or more processes on the same working station in one stroke of the press.
Retaining ring: the retaining ring is a porous tubular component that holds and restricts the position of the ball (ball) in the ball guide column frame.
Movable stopper pin (plate): movable stopper pin (plate) is the stopper (plate) that can move up and down or left and right in the mold.
Toothed plate: the toothed press plate is the special name of the middle pressure plate of the fine blanking die, which is named after the press ring.
Push rod: push rod is a downward movement to directly or indirectly push work (order) parts or waste rod parts.
Floating die handle: the floating die handle is up and down with the upper die seat at the same time, but the angle of the central shaft hole and the upper die seat plane can freely move the die handle in a certain range.
Pushing plate: pushing plate is a plate shaped part that moves in the die or module, and directly or indirectly pushes out the workpiece or waste by downward action.
Wedge: the wedge is the wedge component that changes the direction of the linear motion in the die, and the majority of the wedge changes the vertical motion into horizontal motion.
Bomb: ejector ejector is installed on the machine or the stamping die seat auxiliary device driven by pneumatic, hydraulic, spring, rubber and so on, the roof of the lower die. The push rod to provide pressure and promote its upward movement.
Spring: Spring stripper stripper is composed of spring, rubber, hydraulic and pneumatic unloading activities.
Cemented carbide die: cemented carbide die is a die which uses carbide as the material of the working part of the die.
Material leakage hole: the blanking hole is also directly connected with the blanking die, which is used to remove the hole of the waste or work piece.
Material leakage slope: the deviation of the material is the slope of each side of the die cavity below the edge of the blade. The material leakage angle is used to make the waste or work (order) pieces fall smoothly.
Ball guide die frame: ball guide pillar mould frame is a mould frame which guides each other to the ball (son), and is referred to as the ball bearing frame.
Die handle: the die handle is a cylindrical part projecting on
the top surface of the upper die seat. When it works, it enters into the slider hole of the press and is clamped and fixed.
Die frame: die frame is a combination of upper and lower die seat, guide pillar and guide sleeve, which can be equipped with die handle or without die handle. Most die sets are standard parts.
Die frame: the die frame is the matrix that holds the die block.
Roof: the roof is a plate shaped part moving in a die or a module, which can directly or indirectly push out the workpiece or waste by upward action.
Reference: "Q" stamping technology, Baihui ed., chemical industry press, 2008-01。