S48SA2R503NRFA中文资料
AO4803A;中文规格书,Datasheet资料
THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE.
Gate-Source Voltage
VGS
Continuous Drain
TA=25°C
Current
TA=70°C
Pulsed Drain Current C
Avalanche Current C
Avalanche energy L=0.1mH C
ID
IDM IAS, IAR EAS, EAR
TA=25°C Power Dissipation B TA=70°C
PD
Junction and Storage Temperature Range
TJ, TSTG
Maximum -30 ±20 -5 -4 -30 17 14 2 1.3
V48SR12005NRFA;V48SR05013NRFA;V48SR3R320NRFA;V48SR1R225NNFA;V48SR1R825NNFA;中文规格书,Datasheet资料
High efficiency: 90.5% @ 3.3V/20A Size: 33.0x22.9x9.5mm (1.3”x0.90”x0.37”) Input UVLO and OVP Industry standard footprint and pinout Fixed frequency operation SMD and Through-hole versions OTP and output OCP, OVP (default is autorestart) Output voltage trim: -20%, +10% Monotonic startup into normal and pre-biased loads 2250V isolation and basic insulation No minimum load required No negative current during power or enable on/off ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) recognized, and TUV (EN60950) certified CE mark meets 73/23/EEC and 93/68/EEC directive
Delphi Series V48SR, 1/16th Brick 66W DC/DC Power Modules: 48V in, 1.2V~15V, 25A out
OPTIONS
The Delphi Series V48SR, 1/16 Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from a world leader in power systems technology and manufacturing ― Delta Electronics, Inc. This product family provides up to 66 watts of power or 25A of output current (1.8V and below) in a new 1/16th brick form factor (1.3”x0.90”) and pinout. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. Typical efficiency of the 3.3V/20A module is greater than 90.5%. All modules are protected from abnormal input/output voltage, current, and temperature conditions. For lower power needs, but in a similar small form factor, please check out Delta S48SP (36W or 10A) and S48SE (17W or 5A) series standard DC/DC modules.
2SA系列(PNP型)三极管全参数表
-1.5
-180
-160
120M
60-200
3CA10F
2SA1011S
SANYO
硅PNP三极管,功率放大，场输出，配对管2SC2344
25
-1.5
-180
-160
120M
60-200
3CA10F
2SA1011W
WS
硅PNP三极管,功率放大，场输出，配对管2SC2344
25
-1.5
-180
-160
200m
-500m
-40
-32
200M
82-390
2SA1037AK
ROHM
硅PNP三极管,一般小信号放大，配对管2SC2412K
200m
-150m
-60
-50
140M
120-560
2SA1037B
LRC
硅PNP三极管,一般小信号放大，配对管2SC2412K/2SC4081
200m
-150m
-60
-50
-25
200M
50-340
CK77A
2SA0684
PANASONIC
硅PNP三极管,低频功率放大和驱动，配对管2SC1384
1
-1.5
-60
-50
200M
50-340
CK77A
2SA0794
PANASONIC
硅PNP三极管,低频功率放大和驱动，配对管2SC1567
1.2
-500m
-100
-100
120M
60M
70-240
3CA10D
2SA1013
长电
硅PNP三极管,TO-92，放大
冷却设备分部-S5A型水密阀门说明说明书
SOLENOID VALVEType S5A (S5AE)Port Size 32-75mm (1¼”-3”)FOR AMMONIA, R12, R22, R502AND OTHER COMMON REFRIGERANTS FEATURES• Standard Coil Housing Meets NEMA 3R and NEMA 4 - Rain Tight• Coil Housing Surpasses NEMA Salt Spray Test • Plunger-Needle Assembly Same for S4A, S5A,S6N, S6A, S8F• Replaceable Piston Plug Assembly• Molded Class “B” Coil Construction• Pilot Light Available• Stainless Steel Needle• Manual Opening Stem• MOPD 20.7 bar (300 PSIG)• 27.6 bar (400 PSIG) maximum rated pressure (MRP)BULLETIN 30-93EType S5AMay 2005 Installation, Service and Parts InformationDescriptionThis heavy duty solenoid valve is suitable for Ammonia, R-12, R-22, and R-502, other refrigerants, certain oils and other fl uids approved for use in refrigeration. The S5A is a pilot operated semi-steel bod i ed valve. The valve may be opened by means of the manual open i ng stem for servicing or in case of electrical power failure.The Type S5A Solenoid Valve is furnished with FPT: Internal NPT (U.S. Standard Taper Pipe Thread), Socket Weld, Weld Neck or ODS (solders over copper tubing of given diameter) connections. The valve may be easily removed from between the fl anges for servicing.It is advisable to install a strainer upstream of each valve to prevent entrance of foreign material into the valves and the rest of the sys t em. Refrigerating Specialties strainers are available to close-couple to valve inlets.PurposeType S5A is recommended for use in refrigerant liquid or suction lines. It is not recommended for hot gas lines and other applications where high pressure drops will exist when the valve is open. Principles of OperationThe Type S5A is a pilot operated solenoid. Operation is as follows: The valve, in its closed position, with the solenoid coil de-energized and the plunger-needle in its seated position, is shown in Figure 1. Before the valve is opened, the pressure above the piston-main valve assembly is equalized through the bleed hole and is the same as the inlet pressure. Electrical energization of the solenoid coil forms a magnetic fi eld, pulling up the plunger which strikes the nee d le, lifting it off its seat. This permits the refrigerant trapped above the piston-main valve assembly to fl ow through the pilot and through Port N to the downstream side of the valve. The pressure above the piston-main valve is reduced and the higher inlet pres s ure against the underside of the piston-main valve assembly forces it upward. This puts the valve in the open position permitting fl ow of the refrigerant. The minimum pressure drop to hold the valve wide open is 0.07 bar (1.0 PSI).De-energization of the solenoid coil permits the spring-assisted needle to drop back into its seat, stopping the fl ow through the pilot port, and the pressure above and below the piston-main valve is equalized. The weight of the piston-main valve then causes it to drop to its seat, stopping the fl ow of the refrigerant. The pressure difference across the valve, acting upon the area of the valve seat, holds the piston-main valve in a tightly closed position.Manual Opening Stem (See Fig. 1)The manual opening stem on the Type S5A is for the purpose of opening the valve without energizing the solenoid coil. For access to the stem the seal cap on the bottom of the valve must be re m oved. This must be done with caution as refrigerant may have been trapped inside the seal cap. Manual opening is accomplished by turning the stem clockwise until only the fl ats on the end of the stem protrude from the packing nut. To reset for automatic opera t ion turn the stem counterclockwiseas far as it goes.REPAIR KITS FOR TYPE S5A SOLENOID VALVEDIMENSIONSAllow 100mm (4”) above valve for removal of coil housing assembly.Allow 25mm (1”) below valve to operate manual opening stem.JA BCD SWFPT G NFH MAX.P F .P .T .OR S.W.O.D.S.SOLDER FLANGESWELD NECK FLANGES EBETWEEN TUBE STOPS ADD FOR STRAINERItem #Description Qty 32mm (1-1/4”)40mm (1-5/8”)50mm (2”)65mm (2-1/2”)75mm (3”)1 3Knob O-Ring 1 11,3Knob Kit12052376Coil17A 7B 8Sol Tube Nut Sol Tube Asm. Gasket1 1 17A, 7B, 8Sol Tube Kit12010369 10Plunger/Needle Asm. Seat Asm.1 18,9,10Plunger Seat Kit20136011 12Adapter Asm. Gasket 1 111,12Adapter Kit 20116220115420115820115631Piston Plug 112,31Piston Plug Kit 20120020114020113920111720112132 22 2324Man. Open Stem Flat WasherStem Packing Packing Nut 1 1 1 132,12,22,23Opening Stem Kit20112520113320111820121622,23,24Stem Packing Kit20210020210125 27Gasket Seal Cap 1125,27Seal Cap Kit 20211020214420211128Flange Gasket Pkg.1220208020208120208220208315Bolt Package 820224920254115Bolt Package 62022528-10,12, 22,23,24,25,31,32Sol Repair Kit 2020732020742020752020762020778,12,25,28Sol. Gasket Kit202291202292202293202294Port SizeDimension 32mm (1-1/4”)40 & 50mm (1-5/8 & 2”)65mm (2-1/2”)75mm(3”)A mm 348411437511inch 13.716.217.220.1B mm 117127137198inch 4.65 5.47.8Cmm 203251251311inch89.99.912.2D (FPT,SW)mm 256307331289inch 10.112.11315.3E(WN)1 1/4 1 1/2 1 1/22mm300304364371401478inch 11.81214.314.615.818.8F(ODS)1 3/8 1 5/82 1/8 1 5/8 2 1/82 5/8 2 5/83 1/8 3 1/8 3 5/8mm26 927 930 4358 338 358 348 389414432inch 10.611.012.014.113.314.113.715.316.317.0G mm 178251314314inch 7H mm 117140159176inch 4.6 5.5 6.27.0Jmm 231284300312inch9.111.211.812.3N(ODS)1 3/8 1 5/82 1/8 1 5/8 2 1/8 2 5/8 2 5/83 1/8 3 1/83 5/8mm25283328333838434348inch 1 1.1 1.31.1 1.31.51.5 1.71.71.9P(SW)1 1/4 1 1/2 1 1/22mm151515152529inch0.60.60.60.61.01.1I nstallationProtect inside of valve from dirt, chips and moisture during installation. Mount only in horizontal pipe line with solenoid coil at the top; this valve will work properly only in this position. In a liquid line the Solenoid Valve should be near the expansion valve inlet. It is advisable to install the S5A close coupled companion strainer ahead of the valve for protection against dirt and chips.The S5A solenoid valve must be installed with the arrow on the valve body in the direction of flow through the valve. If the valve is backwards, the flow will not be stopped when the valve is electrically de-energized. Like all Solenoid Valves, the S5A can stop flow only in the direction from normal inlet to normal outlet (as shown by the arrow on the body). If reversal of pressure occurs in the system so the outlet pressure exceeds the inlet pressure the piston will be blown away from its seat and reverse flow will occur. If a system has this type of pressure reversal (as encountered during hot gas defrost with liquid recirculation systems), a check valve such as Refrigerating Specialties Divi-sion Type CK4A in series with the solenoid valve will prevent flow reversal. (CK4A must be installed downstream to avoid trapping liquid.)ElectricalThe Refrigerating Specialties Division molded water resistant Class “B” so-lenoid coil is designed for long life and powerful opening force. The standard coil housing meets NEMA 3R and 4 requirements. This sealed construction can withstand direct contact with moisture and ice. The coil housing far exceeds the requirements of NEMA Standard ICS, 1-110.57 salt spray test for rust resistance.By definition, Class “B” coil construction will permit coil temperatures, as measured by resistance method, as high as 130°C (266°F). Final coil tem-peratures are a function of both fluid and ambient temperatures. The higher fluid temperatures require lower ambient temperatures so the maximum coil temperature is not exceeded. Conversely, low fluid temperatures permit higher ambient temperatures.The molded Class “B” coil is available from stock with most standard volt-ages. However, coils are available for other voltages and frequencies, as well as for direct current. Coils are also available as transformer type with a 6 volt secondary winding for use with the Refrigerating Specialties Division Pilot Light Assembly (see current copy of Bulletin 60-10, “Pilot Light Assembly and Solenoid Transformer Coil”).The solenoid coil must be connected to electrical lines with volts and Hertz same as stamped on coil. The supply circuits must be properly sized to give adequate voltage at the coil leads even when other electrical equipment is operating. The coil is designed to operate with line voltage from 85% to 110% of rated coil voltage. Operating with a line voltage above or below these limits may result in coil burnout. Also, operating with line voltage below the limit will definitely result in lowering the valve opening pressure differential. Power consumption during normal operation will be 33 watts or less. Inrush and running current is listed below:Inrush Running Fuse Standard Coil Current Current Size Volts/Hertz (Amps) (Amps) (Amps) 120/60 (Blue leads) 1.18 0.46 1208/60 (Blue & Red leads) 0.63 0.26 1240/60 (Red leads) 0.60 0.23 1440/60 (Yellow & Red leads) 0.39 0.13 1115/50 (Yellow & Blue leads) 1.22 0.21 1230/50 (Yellow leads) 0.65 0.26 1 Other (Consult Factory)On transformer coil the 6 volt leads are always black.Service PointersThe S5A Solenoid Valve and Strainer are easily removable for cleaning or repairing. To remove valve and strainer, merely unscrew the flange bolts and spread the flanges slightly apart.1. Failure to Open: (a) Coil is of incorrectly high voltage, See “Electrical.” Check voltage printed on the coil. (b) Line voltage is abnormally low. See “Electrical.” Check line voltage at coil leads with a voltmeter. (c) Failure to electrically energize. Check control circuit. (d) Pressure difference across valve is too high. The S5A will open against a maximum pressure difference across the valve of 20.7 Bar (300 psig). (e) Solenoid Coil is burned out. See “Electrical,” and replace with proper coil. (f) Plunger/Needle Assembly is sticking. To disassemble the valve for inspection of internal parts (after pumping out the system as required): disconnect power source to #4 Solenoid Coil, remove #7 Tube Assembly, lift out #9 Plunger Assembly, then remove #11 Adapter Assembly and #31 piston plug. Remove every trace of dirt from the piston and cylinder using fine emery cloth to remove burrs if necessary. Thoroughly clean all parts and reassemble using a light film of refrigeration oil on the Piston.2. Failure to Close: (a) Electrical control circuit is not opening properly. Check wiring and controls. (b) There are chips or dirt on the Pilot Seat or the Main Valve Seat, preventing proper seating. Disassemble and clean Valve as outlined in (1f) above. (c) Main Valve Seat, Pilot Seat, or Valve Needle may be worn or damaged and therefore leaking. Disassemble and clean Valve as outlined in (1f) above. If any of these parts need replacing, it is advisable to replace using the proper replacement kit. (d) #31 Piston is sticking. See (1f) above. (e) #32 Manual Opening Stem is turned all or partly in holding #31 Piston Plug Assembly open and permitting flow through the valve. (f) #5 Coil Housing Screw (made of non-magnetic stainless steel) has been replaced with a screw made of magnetic material and residual magnetism is holding #9 Plunger Needle Assembly in the open position. Consequently, the Main Valve is not closing. Replace with screw of correct material.3. Leakage Through Valve: See (2) above.4. Overheating: The Solenoid Coil is designed to operate hot and is con-structed of high temperature materials accordingly. Unless troubled with actual Coil burnouts, high coil temperature should be ignored. Persistent burnouts indicate improper line or coil voltage. See (1e) above.WarrantyAll Refrigerating Specialties Products are warranted against defect in workmanship and materials for a period of one year from date of shipment from factory. This warranty is in force only when products are properly installed, field assembled, maintained and operated in use and service as specifically stated in Refrigerating Specialties Catalogs or Bulletins for normal refrigeration applications, unless otherwise approved in writing by Refrigerating Specialties Division. Defective products, or parts thereof, returned to the factory with transportation charges prepaid and found to be defective by factory inspection will be replaced or repaired at Refrigerating Specialties option, free of charge, F.O.B. factory. Warranty does not cover products which have been altered or repaired in the field, damaged in transit, or have suffered accidents, misuse, or abuse. Products disabled by dirt or other foreign substances will not be considered defective.THE EXPRESS WARRANTY SET FORTH ABOVE CONSTITUTES THE ONLY WARRANTY APPLICABLE TO REFRIGERATING SPECIALTIES PRODUCTS, AND IS IN LIEU OF ALL OTHER WARRANTIES. EXPRESS OR IMPLIED, WRITTEN OR ORAL, INCLUDING ANY WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. No employee, agent, dealer or other person is authorized to give any warranties on behalf of Refrigerating Specialties, nor to assume, for Refrigerating Specialties, any other liability in connection with any of its products.Safe Operation(see also Bulletin RSBCV)People doing any work on a refrigeration system must be qualified and completely familiar with the system and the Refrigerating Specialties Division valves involved, or all other precautions will be meaningless. This includes reading and understanding pertinent Refrigerating Specialties Division Product Bulletins, and Safety Bulletin RSB prior to installation or servicing work.Where cold refrigerant liquid lines are used, it is necessary that certain pre-cautions be taken to avoid damage which could result from liquid expansion. Temperature increase in a piping section full of solid liquid will cause high pressure due to the expanding liquid which can possibly rupture a gasket, pipe or valve. All hand valves isolating such sections should be marked, warning against accidental closing, and must not be closed until the liquid is removed. Check valves must never be installed upstream of solenoid valves, or regulators with electric shut-off, nor should hand valves upstream of solenoid valves or downstream of check valves be closed until the liquid has been removed. It is advisable to properly install relief devices in any section where liquid expansion could take place.Avoid all piping or control arrangements which might produce thermal or pressure shock.For the protection of people and products, all refrigerant must be removed from the section to be worked on before a valve, strainer, or other device is opened or removed.Flanges with ODS connections are not suitable for ammonia service.。
格拉斯腾达泡杯冰凌机操作手册与配件目录说明书
Operation Manual and Parts DirectoryGlastender, Inc. · 5400 North Michigan Road · Saginaw, MI · 48604-9780800.748.0423 · 989.752.4275 · Fax 800.838.0888 / 989.752.4444 · © 2010 Glastender, Inc.Rev. 04-26-11MF24-SMF48-B2MF24, MF36, MF48M ug F rosters and P late C hillersGlastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • iiP riCes:All prices are LIST. Applicable taxes will be added.Q uotations:Unless otherwise stated, quotations are effective for 30 days only.a CCePtanCe:All orders are subject to acceptance by Glastender, Inc.’s headquarters in Saginaw, Michigan. Possession of the Product Directory and Price List is not an offer to sell.s hiPMents:F.O.B. factory in Saginaw, Michigan. Freight terms are Third Party or Collect if shipped directly to you. Prepay and Add to Invoice freight terms are available upon request. The approximate shipping weights of all products are listed with the prices. Partial shipments will be made unless otherwise specified by the customer. Surface freight classifica-tions are:Glasswashers, Line Chillers - Class 92.5Cocktail Stations, Underbar Equipment - Class 85Bar Die/Underbar Equipment – Class 125Refrigeration Equipment, 48” long or smaller - Class 100Refrigeration Equipment, greater than 48” long - Class 110All small items are evaluated to see the most cost effective means for shipment. Many small items ship via UPS or FedEx; however, when dimensional weight is excessive DB Schenker, UPS Supply Chain, or even common LTL carriers are the most cost effective choice. Spare parts orders received before 1:00 PM EST can usually be shipped the same day.The order department is happy to assist with routing or shipping ques-tions.P ayMent t erMs:Cash should be included with all orders unless credit terms have been arranged. To establish credit, banking and trade references are required.A convenient credit application is available upon request. Payment via credit card is not our normal means of receiving payment. Visa and MasterCard will be accepted, but must be charged at the time of ship-ment. In addition, a payment via credit card for orders totaling more than $500 will incur a 3% convenience fee on the total transaction amount.d elivery:The majority of equipment is manufactured to order and typically ships within three to six weeks after complete order information is received by the factory. In-stock equipment typically ships within two to three days of the factory receiving complete order information.r eturns:Items specified as “Manufactured to Order” are NOT returnable.A Return Material Authorization (RMA) number must be issued by the factory in advance for any items that are returnable. The RMA number MUST be noted on the outside of the returned package. Returns must be received within 90 days of the RMA issue date. Shipping charges must be prepaid. A minimum 20% restocking charge will be applied to all authorized returns if received in new, unused condition in the original packaging.The above conditions apply to spare part returns, except spare part returns must be received within 30 days of original shipment for elec-tronic or electrical parts or within 90 days for all other parts.l oss or d aMage:For customer routed shipments, Glastender, Inc. is not responsible for any loss, damage, or delay of merchandise during shipment. Such transit claims must be filed with the carrier. Merchandise must be examined on arrival. If shortages occur, Glastender, Inc. must be notified in writing within five (5) days of delivery to honor any shortage claim. Glastender will assume responsibility for freight claims on Prepay and Add ship-ments but the customer must inspect freight and note any damage upon receipt. Failure to do so may result in losses at the customer’s expense.C ustoM o rders:Custom orders must be paid in advance and are not subject to cancel-lation.l aMinates:Some products include common, readily available plastic laminates of the customer’s selection. There may be an additional charge if uncom-mon varieties are ordered.05/18/10Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 1Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 2APPLICABLE TO ALL PRODUCTS SOLD WITHIN THE UNITED STATES AND CANADAGlastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 3i ntroduCtionThis manual describes the operational features of Mug Froster/Plate Chiller models MF24, MF36, and MF48. Please review this information before attempting installation and operation.Long term, trouble-free service will follow if good housekeeping and maintenance procedures are followed. Thank you for selecting Glastender, Inc. products.u tility r eQuireMents and C onneCtions• Electrical: 115 V olt AC, 1 Phase, 60 Hz, 6.7 Full Load Amps. A separate 15 Amp circuit is recommended. A 6-footgrounded cord is included.• Plumbing: None required. Automatic condensate evaporator is included.u nCrating and s tart -u P i nstruCtionsAll Mug Frosters and Plate Chiller models are shipped in one carton. These steps should be followed:1. If legs or casters are included, bolt them to the base with the bolts provided.2. Unwrap power cord from base.3. Position Mug Froster/Plate Chiller and level and/or seal as required (see page 2).4. Install shelves.5. Plug into 115 volt AC outlet.6. Load with mugs, glasses, plates, etc.7.Your Glastender Mug Froster/Plate Chiller is now ready for use.s ealing M ug F roster and P late C hiller B ase to F loorTo comply with NSF & health codes. The Mug Froster base must be sealed to the floor using NSF listed sealant.Place a bead of sealant along outer edges of the base and remove excess with disposable towel.Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 4o PerationThe Mug Froster/Plate Chiller is designed to chill mugs, glasses, plates, etc. that will appear “frosted” when removed. The operating temperature range of 0°F (-18°C) to 35°F (2°C).The Mug Froster/Plate Chiller should be filled with dry, room-temperature mugs, glasses, plates, etc. to allow maximum chilling. During business hours, the Mug Froster/Plate Chiller can be loaded with additional dry, room-temperature mugs, glasses, plates, etc. Allow 30 minutes for chilling.The Mug Froster/Plate Chiller includes an automatic defrost system. Defrosting will occur every six hours for approxi-mately 20 minutes. During the defrost cycle, the fan inside the Mug Froster/Plate Chiller will turn off and a small amount of mist may appear if the top is opened.There is also a manual defrost system controlled by a switch located on the front left bottom of the Mug Froster/Plate Chiller. This is used when there is ice or snow accumulation inside. An end-of-the-day or weekly schedule can be estab-lished for the activation of this manual defrost cycle.When the manual defrost switch is pushed, a light will turn on and the Mug Froster/Plate Chiller will go into a six-hour defrost. After six hours, the Mug Froster/Plate Chiller will resume normal operation.If the manual defrost switch is accidentally pushed, the defrost cycle can be terminated by unplugging the power cord for three seconds.C leaning i nstruCtionsCleaning is essential to sustaining the integrity of your equipment and preventing corrosion.ESTIMATED CLEANING TIME: 5 to 10 minutes per unit daily, 30 minutes quarterlyFREQUENCY: Daily cleaning of exterior & door gaskets. Quarterly cleaning of interior, including shelves.PROCEDURE:1. A non-chlorine based cleaner or mild detergent and warm water applied with a soft cloth or sponge to all contact sur-faces.2. Immediately rinse off cleaning agent(s), using clean warm water, clean soft cloth or sponge.3. Dry with a soft clean cloth, removing standing water as soon as possible.NOTES:1. Never use hydrochloric acid, wire brushes, steel wool, scrapers, or chlorine based cleaners on stainless steel surfaces,since they will break down the passivity layer and allow corrosion to occur.2. On stainless steel surfaces, you may use a soft bristle brush or Scotch-Brite ® pad for more stubborn stains. Alwaysscrub with the direction of the grain. Follow with a thorough cleaning as described above.3. Deposits from food preparation must be properly removed. Even hard water deposits will rust stainless steel, if notremoved.4. Repeated cleaning may dry up black-vinyl-clad steel (exterior) surfaces of the cooler. Armor All ® or similar productcan bring back the shine. Apply the product to a cloth and then rub into the surface, rather than spraying it directly onto the black-vinyl-clad surface.5. The cooler door gaskets are most often overlooked when cleaning. Failure to clean them regularly will lead to prema-ture failure, since alcohol and moisture build-up breaks down the gasket material.6. Mug frosters have a manual defrost timer switch on the front near the bottom, which will activate a 6-hour defrost cycle.Depressing the switch before you close for the evening will remove excess frost build-up on the interior liner. This pro-cedure should be done as often as is necessary. It should also be done the night before the quarterly interior cleaning.e leCtriCal and r eFrigeration s PeCiFiCationsd esignM odel r eFrigerant P ressure(L-to-R length) e leCtriCal t yPe C harge h igh l oW 24”, 36”, 48” 115V, 1Ph., 60 Hz., 6.7 Amp R404A 8.5oz. 350 175800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 5Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 6Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 7P art n o .o ld P art n o .d esCriPtionP riCe3. 07000127Overload protector for R404 Aspera compressor 15.00 4. 07000175 GT-035026 1/3 HP Tecumseh compressor, R404A (after 1/00) 375.000700023719. 07000235 GT-038203 Wicking material, consists to 11 4” pieces, MF24 14.0007000724Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 8Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 9P art n o .o ld P art n o .d esCriPtionP riCe12. 07000227 GT-037419 Control module, complete400.00Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 10P art n o .o ld P art n o .d esCriPtionP riCe07000159 9. 07000162 GT-033108 Shelf, 12” x 19-5/8” [MF36 = 3 (bottom, middle, top),40.0007000224 Complete shelf kit for MF36 (includes: 1- 07000159, MF24 = 1MF36 = 1MF48 = 2MF24 = 0MF36 = 0MF48 = 119-5/8″19-5/8″19-5/8″19-5/8″0700015907000158Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 11P artn o .o ldP art n o .d esCriPtionP riCeGlastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 1207000193 GT-036112 Back, stainless steel, MF24 80.00 07000194 GT-036113 Back, black vinyl-clad, MF36 50.00 07000195 GT-036114 Back, stainless steel, MF36 100.00 2. 07000196 GT-036115 Back, black vinyl-clad, MF48 55.00 07000197 GT-036116 Back, stainless steel, MF4896.00 3. 07000198 GT-036117 Side, left, black vinyl-clad, all models 40.00Model MF48Front viewRear viewFront viewGlastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780800.748.0423 • 989.752.4275 • Fax 800.838.0888 / 989.752.4444 • 13Installation Notes____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________Original System InstallerCompany: _____________________________________________Address: __________________________________________________________________________________________City, State, Zip: _____________________________________________Phone Number: _____________________________________________Fax Number: _____________________________________________Contact:_____________________________________________P artno .desCriPtionPriCeExpect moremore flexibilitymore featuresGlastender has the most complete line of bar equipment andthe ability to manufacture custom units, giving you virtuallyunlimited design flexibility. Each piece of equipment isengineered with features that enhance your efficiency, easeyour maintenance, and prolong the life of your investment.The flexibility you want. The features you need. GLASSWASHERS • COCKTAIL STAT。
AT Controls Series 8R 三件套球阀说明书
8R-2R-20220525Copyright 2013 A-T Controls, Inc.SERIES 8R 3-PieceTriac 8R Series 3-Piece Ball Valves are the finest quality 3-piece valves on the market. The High quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville washers, “V” ring packing and a unique primary pyramidal stem seal. This advanced sealing system provides protection against stem leaks experienced by ordinary ball valves.RTFE seats are standard, but variousoptions are available for seatmaterials. The 50/50 STFE seatoption is excellent for services thatcall for higher temperatures andmore difficult applications includingsteam.Call us for details.Easy to Automate!See automated data sheets for pre-sized assemblies Pneumatic ElectricCincinnati, Ohio 45246 PHONE (513) 247-5465 FAX (513) 247-5462********************High Performance, Regular Port 3-Piece Ball ValveISO 5211 Mounting Pad Classes up to 600 960 to 1480 psi(by size)High Performance, Regular Port 3-Piece Ball ValveISO 5211 Mounting Pad Classes up to 600 960 to 1480 psi (by size)SERIES 8R 3-Piece ********************Actuators are sized based on clean/clear fluid.DIMENSIONS (IN)8RDA-20151024Copyright 2013 A-T Controls, Inc.SERIES 8R 3-PieceOther options available - call for detailsActuators are sized based on clean/clear fluid.Lock Saddle Belleville WasherGlandChevron Packing Pyramidal (45°)Stem & Stem sealDIMENSIONS (IN)DIMENSIONS SHOWN ARE FOR ASSEMBLIES SIZED FOR 80 PSI SUPPLY SERIES 8R 3-PieceCincinnati, Ohio ********************See valve part number matrix for complete part number and options.SAMPLE PART #Valve SeriesValve SizeSeat Material End Connection TRIAC Actuator Series Actuator Size Spring Return SolenoidLimit Switch Carbon Steel 8RSeries_20200810 | Copyright 2013 A-T Controls, Inc. | | (513) 247-54658RSR-20151024Copyright 2013 A-T Controls, Inc.Actuators are sized based on clean/clear fluid.Cincinnati, Ohio 45246Lock Saddle Belleville WasherGlandChevron Packing Pyramidal (45°)Stem & Stem sealSee valve part numbermatrix for complete partnumber and options.SAMPLE PART #Valve Series Valve Size Seat MaterialEnd ConnectionTRIAC Actuator SeriesActuator SizeSpring ReturnSolenoidCarbon Steel8RC-TX-050/2R2S-XX ********************SAMPLE PART #Other options available - call for detailsActuators are sized based on clean/clear fluid.NOTE: Heater and thermostat standard (2) auxiliary switches standardLock Saddle Belleville WasherGlandChevron Packing Pyramidal (45°)Stem & Stem seal8RC-TH-0200-XXX-X-_ _SAMPLE PART #(2) Valve Series(4) End Connection(6) Seat, Lining & TrimMaterial (5) Valve Size(7) Special Designation(8) Additional Specials(9,10,11) OptionsMANUAL VALVE(3) Body/Ball/StemMaterialHOW TO ORDER:Manual Valves w/ OptionsHOW TO ORDER:Automated Valves(10) Special DesignationSAMPLE PART #(2) Valve Series(3) Body/Ball/StemMaterial(6) Valve Size(5) Seat, Lining, & TrimMaterial(4) End Connection (7) TRIAC Actuator Series(7) Actuator Size (7) Double Acting(8) Accessory (9) Accessory 8RC-TX-100/2R3D-XX-_TFM™ is a trademark of Dyneon™, a 3M Company.8R-2R-20220525Cincinnati, Ohio 45246FAX (513) 247-5462。
H48SA28016NYFH;中文规格书,Datasheet资料
Input current(A)
18 16 14 12 10
8 6 4 2 0
30
Io=16A Io=16A
40
50
60
70
Input voltage(V)
Figure 3: Typical input characteristics at room temperature
ELECTRICAL CHARACTERISTICS CURVES
Efficiency(%)
94 93 92 91 90 89
2
36V 48V 75V
7
12
output current(A)
Power dissipation(W)
45 40 35 30 25 20 15 10
5 0
2
36V 48V 75V
Io=Io,min to Io,max Vin=36V to 75V
Tc=-40°C to 100°C over sample load, line and temperature
5Hz to 20MHz bandwidth Full Load, 1µF ceramic, 10µF Low ESR cap Full Load, 1µF ceramic, 10µF Low ESR cap
FEATURES
High Efficiency: 92.7% @ 28V/16A Size: 61.0x57.9x12.7mm (2.40”×2.28”×0.50”) Standard footprint Industry standard pin out Fixed frequency operation Metal baseplate (heatspreader) Input UVLO, Output OCP, OVP, OTP Basic insulation 1500V isolation 2:1 Input voltage range ISO 9001, TL 9000, ISO 14001, QS9000,
瑞萨汽车电子产品型号速查
封装
TO-263
TO-220
TO-262 HSON-8
5
TO-252
TO-220
TO-262
HSON-8
TO-252
TO-263
TO-263-7p
TO-263
TO-263-7p
TO-263
TO-262
TO-263-7p
TO-263
TO-263-7p
TO-263
TO-263
TO-263
TO-263
TO-263
２０１５．０３
瑞
萨
电汽车电子用功率器件（Power MOSFET及IPD）
4
汽车电子用MCU-K系列（78K）
12
汽车电子用MCU-F系列（78K/RL78/V850/RH850）
14
汽车电子用MCU-D系列（RL78/78K）
26
汽车电子用MCU-SuperH族
28
汽车电子用MCU产品-RH850族
Rth（ch-C） （℃/W）
1.02 1.02 1.02 1.09 1.43 1.43 1.43 1.55
0.43 0.52 0.6 0.68 0.66 0.52 0.52 0.6 0.68 0.52 0.75 0.75 1.05 1.43 1.43 1.43 1.43 1.7 1.95 0.52 0.6 0.52 0.52
Ｒ８Ｃ族
ＡＥ１－Ｌ系 （ＡＳＳＰ）
开发工具与开发环境
芯片封装说明
Ｐｏｗｅｒ ＭＯＳＦＥＴ及ＩＰＤ
Ｋ系列 （７８Ｋ）
Ｆ系列 （７８Ｋ／ＲＬ７８／Ｖ８５０／ＲＨ８５０）
Ｄ系列 （ＲＬ７８／７８Ｋ）
ＳｕｐｅｒＨ族
ＲＨ８５０族
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
100ms Refer to Figure 18 for measuring point 1 minute
-40 -55 1500 36 32.5 30.5 1
100% Load, 36Vin
P-P thru 12µH inductor, 5Hz to 20MHz 120 Hz Vin=48V, Io=50%Io.max, Ta=25℃ Io=Io,min to Io,max Vin=36V to75V Ta=-40℃ to 85℃ Over sample load, line and temperature 5Hz to 20MHz bandwidth Full Load, 1µF ceramic, 10µF tantalum Full Load, 1µF ceramic, 10µF tantalum Output Voltage 10% Low 48V, 10µF Tan & 1µF Ceramic load cap, 0.1A/µs 50% Io,max to 75% Io,max 75% Io,max to 50% Io.max
-10 115
125 TBD 18 115
2
DS_S48SA1R212_05122006
元器件交易网
ELECTRICAL CHARACTERISTICS CURVES
85 80 75 70 65 60 55 50 1 2 3 4 5 6 7 8 9 10 11 12
36Vin 48Vin 75Vin
0.6
Io=10A Io=6A
0.5 0.4 0.3 0.2 0.1 0.0 30 35 40 45 50 55 60
Io=1A
65
70
75
INPUT VOLTAGE (V)
Figure 3: Typical input characteristics at room temperature.
Figure 4: Turn-on transient at full rated load current (1 ms/div). Top Trace: Vout (500mV/div); Bottom Trace: ON/OFF Control (5V/div).
POWER DISSIPATION (W)
EFFICIENCY (%)
90
4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 1 2 3 4 5 6 7 8 9 10 11 12
OUTPUT CURRENT (A)
36Vin 48Vin 75Vin
OUTPUT CURRENT (A)
NOTES and CONDITIONS
Min.
S48SA1R212NRFA
Typ. Max. 80 100 102 125 48 34 32 2 35 7 0.01 5 50 1.17 1.20 ±2 ±2 100 1.15 30 5 0 13.2 15.6 35 35 200 6 6 1.23 ±10 ±5 300 1.25 75 20 12 18 100 100 12 12 2200 75 35.5 33.5 3 0.85 Units Vdc Vdc °C °C Vdc V V V V A mA mA A2s mA dB V mV mV ppm/℃ V mV mV A A mV mV µs ms ms µF % V MΩ pF kHz 0.8 15 1 50 +10 160 V V mA uA % % hours grams °C
Full load; 5% overshoot of Vout at startup 82 1500 10 1500 330 Von/off at Ion/off=1.0mA Von/off at Ion/off=0.0 µA Ion/off at Von/off=0.0V Logic High, Von/off=15V Across Trim Pin & +Vo or –Vo, Pout≦max rated Over full temp range; % of nominal Vout Io=80% of Io, max; Tc=40°C Refer to Figure 18 for measuring point 0 84
DATASHEET DS_S48SA1R212_05122006 Delta Electronics, Inc.
元器件交易网
TECHNICAL SPECIFICATIONS
(TA=25°C, airflow rate=300 LFM, Vin=48Vdc, nominal Vout unless otherwise noted)
Figure 1: Efficiency vs. load current for minimum, nominal, and maximum input voltage at 25°C.
INPUT CURRENT (A)
Figure 2: Power dissipation vs. load current for minimum, nominal, and maximum input voltage at 25°C.
Delphi Series S48SA, 33W Family DC/DC Power Modules: 48V in, 1.2V/12A out
The Delphi Series S48SA, surface mountable, 48V input, single output, isolated DC/DC converters are the latest offering from a world leader in power system and technology and manufacturing – Delta Electronics, Inc. This product family provides up to 33 watts of power or up to 12A of output current (1.8V or below). With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. All models are protected from abnormal input/output voltage and current conditions.
PARAMETER
ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous Transient (100ms) Operating Temperature Storage Temperature Input/Output Isolation Voltage INPUT CHARACTERISTICS Operating Input Voltage Input Under-Voltage Lockout Turn-On Voltage Threshold Turn-Off Voltage Threshold Lockout Hysteresis Voltage Maximum Input Current No-Load Input Current Off Converter Input Current Inrush Current(I2t) Input Reflected-Ripple Current Input Voltage Ripple Rejection OUTPUT CHARACTERISTICS Output Voltage Set Point Output Voltage Regulation Over Load Over Line Over Temperature Total Output Voltage Range Output Voltage Ripple and Noise Peak-to-Peak RMS Operating Output Current Range Output DC Current-Limit Inception DYNAMIC CHARACTERISTICS Output Voltage Current Transient Positive Step Change in Output Current Negative Step Change in Output Current Settling Time to 1% of Final value Turn-On Transient Start-Up Time, From On/Off Control Start-Up Time, From Input Maximum Output Capacitance EFFICIENCY 100% Load ISOLATION CHARACTERISTICS Isolation Voltage Isolation Resistance Isolation Capacitance FEATURE CHARACTERISTICS Switching Frequency ON/OFF Control, (Logic Low-Module ON) Logic Low Logic High ON/OFF Current Leakage Current Output Voltage Trim Range Output Over-Voltage Protection(Hiccup) GENERAL SPECIFICATIONS Calculated MTBF Weight Over-Temperature Shutdown