路由也来合体-Linksys企业路由报1280

合集下载

Hillstone山石网科基础配置手册5.0

3.在弹出的<接口配置>对话框对接口进行编辑:
绑定安全域：指定接口的安全域类型。三层接口选择三层安全域，二层接口选择二层安全域；
安全域：选择安全域名称。一般情况下，内网选择trust或l2-trust；外网选择untrust或l2-untrust。
IP配置：为接口配置IP地址相关信息。
管理方式：指定接口的管理方式。在<管理4.点击目的路由列表左上角的『新建』按钮，弹出<目的路由配置>对话框，在该对话框对目的路由进行编辑：
目的地：指定路由条目的目的IP。
子网掩码：指定路由条目的目的IP对应的子网掩码。
下一跳：指定下一跳类型，选中<网关>或<接口>单选按钮。若选择<网关>，需在<网关>文本框中输入网关IP地址。若选择<接口>，需在<接口>下拉菜单中选择接口名称。如果该接口为tunnel的时候，需要在可选栏输入tunnel对端的网关地址。如：下一跳网关指定为122.193.30.97（由运营商提供网关地址）。
命令行：通过CLI使用命令进行恢复
WebUI：通过WebUI清除配置以恢复出厂配置
物理方法：使用设备的CLR按键进行恢复
通过
通过CLI使用命令恢复出厂设置，请按照以下步骤进行操作：
1.在执行模式下，使用unset all命令。
2.根据提示，选择是否保存当前配置：y/n。
3.选择是否重启设备：y/n。
上传许可证文件：选中<上传许可证文件>单选按钮（许可证为纯文本.txt文件），点击『浏览』按钮，并且选中许可证文件；
手动输入：选中<手动输入>单选按钮，然后将许可证字符串内容（包含“license：”及之后内容）输入到对应的文本框。

企业核心骨干网交换路由器enterasys Networks X - Pedition 8600 产

Industry-Leading Performance and Control at the Network CoreEnterasys Networks’ award-winning X-Pedition family represents a new generation of switch routing solutions engineered to support today’s rapidly expanding enterprises. Built particularly for the backbone, the 16-slot X-Pedition 8600 switch router combines wire-speed performance at gigabit rates, pinpoint control of application flows, and superior routing capacity to ensure high availability of internal and external networks including business-critical web content, ERP applications, voice/video/data, e-commerce and more. The high-capacity X-Pedition 8600 delivers full-function, wire-speed IP/IPX routing—both unicast (IP:RIP ,OSPF , BGP , IPX:RIP) and multicast (IGMP , DVMRP , PIM-DM, PIM-SM). Powered by a non-blocking 32 Gigabit per second switching fabric, the X-Pedition 8600’s throughput exceeds 30 million packets per second and can be configured with up to 240 10/100 ports or 60 Gigabit Ethernet ports.Enterprise backbone requirements are met through massive table capacity and redundancy. The X-Pedition is also the industry’s first Gigabit switching router with WAN capabilities. The WAN interfaces extend the benefits of the X-Pedition to remote locations, providing network administrators application-level control from the desktop to the WAN edge, all at wire speed.The unique X-Pedition architecture enables you to route or switch packets based on the information in Layer 4 or on the traditional source-destination information in Layer 3. This application-level control allows the X-Pedition to guarantee security and end-to-end Quality of Service (QoS) while maintaining wire-speed throughput. QoS policies may encompass all the applications in the network, groups of users, or relate specifically to a single host-to-host application flow.•High-capacity, multilayer switch router for enterprise backbones—Full-function IP/IPX routing for unicast and multicast traffic—32 Gbps non-blocking switching fabric; 30 Mpps routing throughput —Up to 60 Gigabit Ethernet ports; up to 240 10/100 ports—Built-in support for 10 Gig, optical networks and emerging technologies •Full application support from the desktop to the WAN—Wire-speed Layer 4 application flow switching—Maintains wire-speed performance with all other features enabled —Supports HSSI, FDDI, ATM and serial WAN interfaces —Ready now for multicast voice and video applications•Pinpoint control to prioritize applications, improve e-business operation—Wire-speed, application-level QoS for end-to-end reliability —Application load balancing and content verification—Supports DiffServ, Weighted Fair Queuing and Rate Limiting (CAR)•Superior fault tolerance to ensure 24x7 network availability—Redundant power supplies and CPUs to protect from failures —Load sharing to enhance performance through redundant links•Advanced security features for greater peace of mind—Secure Harbour™ framework protects against internal and external abuse —Wire-speed Layer 2/3/4 security filters•Standards-based, intuitive management for fast, easy troubleshooting—Full support for RMON and RMON 2—Comprehensive SNMP-based management via NetSight™ AtlasThe X-Pedition 8600 is easily configured and managed through NetSight Atlas network management software,which includes plug-in applications for ACL, inventory and policy management. The X-Pedition Switch Router is fully standards-based and completely interoperable with existing networking equipment.Guaranteeing Quality of ServiceWith global enterprise more dependent than ever on the applications that support their business—from e-commerce and SAP to emerging multicast video applications—quality of service (QoS) becomes a top priority.QoS refers to a set of mechanisms for guaranteeing levels of bandwidth, maximum latency limits, and controlled interpacket timing. Enterasys’ X-Pedition 8600 delivers true standards-based QoS by integrating wire-speed Layer 4 switching with policy-based traffic classification and prioritization. Because Enterasys’ custom ASICs can read deeper into the packet, all the way to Layer 4, traffic can be identified, classified, and prioritized at the application level.Unmatched Performance with Wire-Speed Routing and SwitchingThe X-Pedition 8600 minimizes network congestion by routing more than 30 million packets per second (pps). The 32 Gbps switching fabric in the X-Pedition delivers full-function unicast and multicast wire-speed IP/IPX routing at gigabit speeds on all ports.The X-Pedition 8600’s custom ASICs switch or route traffic at wire speed based on Layer 2, Layer 3 and Layer 4 information. These ASICs also store QoS policies and security filters, providing wire-speed performance even when QoS and security filters are enabled. As a result, network managers no longer need to make compromises when it comes to performance and functionality; the X-Pedition delivers both.Application-Level QoS and Access Control—at Wire SpeedBased on Layer 2, Layer 3 and Layer 4 information, the X-Pedition allows network managers to identify traffic and set QoS policies, without compromising wire-speed performance.The X-Pedition can guarantee bandwidth on an application-by-application basis, thereby accommodating high-priority traffic even during peak periods of usage. QoS policies can be broad enough to encompass all the applications in the network, or relate specifically to a single host-to-host application flow.Unlike conventional routers, the X-Pedition’s performance does not degrade when security filters are imple-mented. Wire-speed security, obtained through 20,000 filters, enables network managers to benefit from both performance and security. Filters can be set based on Layer 2, Layer 3 or Layer 4 information, enabling network managers to control access based not only on IP addresses, but also on host-to-host application flows.Wire-Speed Multicast to Support Convergence ApplicationsThe X-Pedition’s switching fabric is capable of replicating packets in hardware, eliminating performance bottlenecks caused by conventional software-based routers. By providing the necessary infrastructure, the X-Pedition turns the network into an efficient multicast medium, supporting Protocol Independent Multicasting-Sparse Mode (PIM-SM), DVMRP and per-port IGMP .Industry-Leading CapacityLarge networks require large table capacities for storing routes, application flows, QoS rules, VLAN information and security filters. The X-Pedition 8600 provides table capacities that are an order of magnitude greater than most other solutions available today, supporting up to 250,000 routes, 4,000,000 application flows and 800,000 Layer 2 MAC addresses.How the X-Pedition Supports QoS•Wire-Speed Routing on Every Port —Removesrouting as the bottleneck and avoids “switch when you can, route when you must”schemes which are often complicated and proprietary •Massive Non-Blocking Backplane —Prevents overloaded output wires from clogging the switching hardware and isolates points of network congestion so that other traffic flows are unaffected•Large Buffering Capacity —Avoids packet loss during transient bursts that exceed output wire capacity •T raffic Classification and Prioritization —Enables policy-based QoS which guarantees throughput and minimizes latency forimportant traffic during times of congestion•Layer 4 Flow Switching —Provides application-level manageability, enabling the implementation of trueend-to-end QoS (e.g., RSVP)•Intuitive QoS Management Interface —Allows powerful QoS policies to beimplemented and maintained quickly and easily•Detailed NetworkInstrumentation —Facilitates network baselining and troubleshooting, delivering insight into the behavior of network trafficFull-function wire-speed IP/IPX routing enables the X-Pedition to scale seamlessly as the network evolves.The chassis-based X-Pedition can be configured with up to 240 10/100 ports or up to 60 Gigabit Ethernet ports. More than 4,000 VLANs, 20,000 security filters and large per-port buffers provide the capacity to handle peak traffic across even the largest enterprise backbones.Comprehensive Management for Easy Deployment, Changes and T roubleshootingVLAN Management —The X-Pedition can be configured to support VLANs based on ports and work managers can use Layer 2 VLANs with 802.1p prioritization and 802.1Q tagging, and can configure VLANs guided wizards within NetSight Atlas management software.Extensive Performance Monitoring —The X-Pedition paves the way for proactive planning of bandwidth growth and efficient network troubleshooting by providing RMON and RMON2 capabilities per port. Easy-to-Use, Java-Based Management —The X-Pedition’s rich functionality is made easy to use through NetSight Atlas, a command console that provides extensive configuration and monitoring of the X-Pedition as well as your entire Enterasys network. NetSight Atlas allows network managers to use any Java-enabled client station across the enterprise to remotely manage the X-Pedition 8600. NetSight Atlas can run on Solaris and Windows NT/2000/XP environments.Why the X-Pedition is a Better Backbone Router•Best-Selling Modular Layer 3Switch Router•Wire-Speed Performance with All Features Enabled •First to Support WAN Interfaces•Part of an Integrated End-to-End Solution•Pinpoint Application Control from the Desktop to the WAN •Multilayer Security Filters Don’t Sacrifice Performance •Award-Winning, Time-T ested Solution•Highly Manageable, Easily ConfigurableX-Pedition, NetSight and Secure Harbour are trademarks of Enterasys Networks. All other products or services mentioned are identified by the trademarks or servicemarks of their respective companies or organizations. NOTE: Enterasys Networks reserves the right to change specifications without notice. Please contact your representative to confirm current specifications.TECHNICAL SPECIFICATIONSPerformanceWire-speed IP/IPX unicast and multicast routing32 Gbps non-blocking switching fabric30 Million packets per second routing and Layer 4 switchingthroughputCapacity240 Ethernet/Fast Ethernet ports (10/100Base-TX or100Base-FX)60 Gigabit Ethernet ports (1000Base-LX or 1000Base-FX)Up to 25,000 routesUp to 4,000,000 Layer 4 application flowsUp to 800,000 Layer 2 MAC addressesUp to 250,000 Layer 3 routesUp to 20,000 security/access control filters3 MB buffering per Gigabit port1 MB buffering per 10/100 port4,096 VLANsPower System120VAC, 6A MaxRedundant CPU and power supplyHot-swappable media modulesPHYSICAL SPECIFICATIONSDimensions48.9 cm (19.25”) x 43.82 cm (17.25”) x 31.12 cm (12.25”)Weight61.75 lb. (28.0 kg)ENVIRONMENTAL SPECIFICATIONSOperating T emperature0°C to 40°C (32°F to 104°F)Relative Humidity5% to 95% noncondensingPROTOCOLS AND STANDARDSIP RoutingRIPv1/v2, OSPF, BGP-4IPX RoutingRIP, SAPMulticast SupportIGMP, DVMRP, PIM-DM, PIM-SMQoSApplication level, RSVPIEEE 802.1pIEEE 802.1QIEEE 802.1d Spanning T reeIEEE 802.3IEEE 802.3uIEEE 802.3xIEEE 802.3zRFC 1213 - MIB-2RFC 1493 - Bridge MIBRFC 1573 - Interfaces MIBRFC 1643 - Ethernet like interface MIBRFC 1163 - A Border Gateway Protocol (BGP)RFC 1267 - BGP-3RFC 1771 - BGP-4RFC 1657 - BGP-4 MIBRFC 1058 - RIP v1RFC 1723 - RIP v2 Carrying Additional InformationRFC 1724 - RIP v2 MIBRFC 1757 - RMONRFC 1583 - OSPF Version 2RFC 1253 - OSPF v2 MIBRFC 2096 - IP Forwarding MIBRFC 1812 - Router RequirementsRFC 1519 - CIDRRFC 1157 - SNMPRFC 2021 - RMON2RFC 2068 - HTTPRFC 1717 - The PPP Multilink ProtocolRFC 1661 - PPP (Point to Point Protocol)RFC 1634 - IPXWANRFC 1662 - PPP in HDLC FramingRFC 1490 - Multiprotocol Interconnect over Frame RelayORDERING INFORMATIONSSR-16X-Pedition 8600 switch router 16-slot base system includingchassis, backplane, modular fan, and a single switch fabricmodule (SSR-SF-16). Requires new CM2 Control ModuleSSR-PS-16Power Supply for the X-Pedition switch router 8600SSR-PS-16-DCDC Power Supply Module for the X-Pedition 8600SSR-SF-16Switch fabric module for the X-Pedition 8600. One moduleships with the base system (SSR-16). Order only if second isrequired for redundancy.SSR-PCMCIAX-Pedition 8600 and 8000 8MB PCMCIA card (ships with SSR-RS-ENT, second required for redundant CM configuration)SSR-CM2-64X-Pedition switch router Control Module with 64 MB memorySSR-CM3-128X-Pedition switch router Control Module with 128 MB memorySSR-CM4-256X-Pedition switch router Control Module with 256 MB memorySSR-MEM-128New CM2 memory upgrade kit (For CM2 series only)SSR-RS-ENTX-Pedition Switch Router Services for L2, L3, L4 Switchingand IP (Ripv2, OSPF) IPX (RIP/SAP) Routing. One requiredwith every chassis, shipped on PC card.© 2002 Enterasys Networks, Inc. All rights reserved. Lit. #9012476-111/02。

LINKSYS WVC200 说明书

PRODUCT SHEET BUSINESS SERIESFlexible remote controlled Wireless Video solution for your small business.Wireless-G PTZ Internet Camera with Audio•Sends high-quality live videoto your network wirelessly.Pan/Tilt/Zoom gives flexiblecontrol remotely from aWeb Browser•Capacity to view imageseven in low lightenvironments•Automatically sends emailalerts with video clips uponmotion detection•Supports up to tensimultaneous users The Linksys Wireless-G Pan/Tilt/Zoom Video Camera sends live video through the Internet to a web browser anywhere in the world!The advanced MPEG-4 video compression produces a high-quality, high-framerate, up to 640x480 video stream. MPEG-4 encoding facilitates good video quality in varying bandwidth environments. WVC200 also supports MJPEG compression for video, providing good video quality at high bandwidth rates.The comprehensive video features include an IR filter cut which allow you to see the images in low or no light environments when an IR lamp is used. Snapshots (in JPEG format) of the image can be taken and saved.Snapshots can also be scheduled and sent to an FTP server.If you want the video to be visible from a remote location or from the Internet, you can open an appropriate port on the Router, and then create password protected accounts to manage access to the camera, or leave it wide open for the world to see. Support for Dynamic DNS lets you access your camera using an easy-to-remember “name”, even while using a dynamic IP address. The Pan/Tilt and digital zoom function allows you to remotely control the camera movement and focus, giving you maximum flexibility remotely. Up to 10 simultaneous users can have access to the camera at any point in time. Software is included for multiple camera monitoring and recording to your hard drive with advanced search by time and date. Recording can be set up to record by motion trigger, manual or schedule recording and playback on Windows Media Player without the need for a proprietary player.You can also turn on Security Mode, which tells the camera to send a message with a short video attached to up to three email addresses whenever it detects motion in its field of view. You can then log onto the live video stream if the situation warrants. Wireless security features include WEP and WPA.Model No:WVC200Package Contents•Wireless PTZ Internet Camera with Audio•Setup Wizard CD-ROM•User Guide on CD-ROM•Network Cable•Power Adapter•Stand•Registration CardMinimum Requirements•Wired or Wireless 802.11b, or 802.11g Network•Network Adapter With Ethernet Network Cable and TCP/IP Protocol Installed Per PC•Switch/Router To Support Multiple Connection Points•Internet Explorer 5.x or above with ActiveX Support for Viewing•Microsoft Windows XP, 2000, ME or 98SE•1GHz Pentium4, or AMD Athlon Class CPU with 128 MB RAM•32MB AGP Video AdapterAlso works with•SRW224G4High density expandable Ethernet switch•WRV54G The Easy Way to Connect your Wireless-G Network to the Internet •WAP54GP An interior Access Point that Can be Used with the WAP54GPE as aBridge or RepeaterSpecificationsModel Number WVC200Standards IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u,802.11e (Wireless QoS)Protocols Supported TCP/IP, HTTP, DHCP, SMTP, FTP, NTP, DNS, UPnP and DDNSPorts Ethernet, Antenna, Microphone, PowerButtons ResetCabling Type UTP CAT 5LEDs Power, Ethernet, Wireless-GLensSensor1/5" CMOSIllumination*********Focal Length500mm~InfinityField of View60Video Resolution640 x 480, 320 x 240, 160 x 120Frame Rate Up to 30 fpsCamera ControlAuto Patrol9 Definable Preset Points by UserPan± 67°Tilt-34° (down) to +30° (up)Setup/ConfigWebUI Built in Web UI for Easy Browser-Based Configuration (HTTP)•Pan, Tilt and 2x Digital Zoom Wireless Internet Camera •CMOS Sensor with Glass Lens •Dual - Codec MPEG-4 or MJPEG Selectable Compression •Capture Video and Audio (with Built-In Microphone) to Your Hard Drive•Built-In Web Server for Remote Access with On-Screen Users Connected Information •Supports UPnP for Easy Discovery on the Network •DDNS support Linksys SoloLink and Other Available Free DDNS Services•Supports up to 10 Simultaneous Users•Motion Detection Triggered Event that Sends Out Video Clip to Up to 4 E-Mail Addresses •LCD Screen Displays FullIP Address•Included Software for Monitoring and Recording Up to 9 Cameras SimultaneouslyModel No:WVC200ManagementWeb Browser Internet Explorer 5.x, or AboveEvent Logging Event LoggingWeb F/W upgrade Firmware Upgradable Through Web-BrowserVideo CompressionDual Codec MPEG-4 Simple Profile, MJPEGSnapshot JPEGModulation NTSC and PALImage position Flip and MirrorImage Settings Brightness and ContrastNight Vision IR Filter cut for low lightMotion Detection Send Video Clip to an email address on motion detectionAudioCompression G.726Sampling Rate8 KHzDefault Bit Rate16KbpsManagement UtilityMonitor andRecording software Included software for multiple camera monitoring and recording toyour hard drive with advanced search by time and date. Recordingcan be set up to record by motion trigger, manual or schedulerecording and playback on Windows Media Player without the needfor a proprietary playerSecurityWEP/WPA WEP 64bit/128bit, WPA-TKIP, WPA-PSKUser List User Rights List to View Video and/or to Camera Control Functions Username/password Logon authentication 20 character username and 8character passwordNetworkNTP Network Time ProtocolSMTP Simple Mail Transfer Protocol Client allows video clips to be emailed FTP Client FTP Client facilitates scheduling transfer of images to an FTP server DDNS Dynamic DNS facilitates reaching the camera by a name irrespectiveof what the IP address is. Sololink, DynDNs, and TZO is supported UPnP Allows autodiscovery of the camera by other UPnP devices EnvironmentalDevice Dimensions 1.26 x 7.83 x 6.89 inches(W x H x D)32 x 199 x 175 mmWeight 1.01 lbs.Power5DVC 2.5A Switching Power SupplyCertification FCC, CE and ULOperating Temp.-32 °F ~ 113 °F (-0 °C ~ 45 °C)Storage Temp.-4 °F ~ 140 °F (-20 °C ~ 70 °C)Operating Humidity10% to 80% Non-CondensingStorage Humidity0% to 90% Non-CondensingA Division of Cisco Systems, Inc.18582 Teller AvenueIrvine, CA 92612 USAEmail:************************************Web: Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at . Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright ©2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holdersWVC200-DS-60110NC CB。

鼎信通达综合接入网关用户手册v2.2说明书

修正记录文档名称鼎信通达综合接入网关用户手册手册版本 2.2日期2014/10/18作者Porter修正说明同步支持IMS平台软件版本2.18.02.06或以上版本目录第一章产品介绍 (1)1.1概述 (1)1.2产品外观 (2)1.3接口及指示灯介绍 (2)1.3.1DAG1000-4S接口及指示灯介绍 (2)1.3.2DAG1000-8S接口及指示灯说明 (3)1.3.3DAG2000-16S接口及指示灯介绍 (5)1.3.4DAG2000-24/32S接口及指示灯介绍 (6)1.3.5DAG2500-48/72S接口及指示灯介绍 (9)1.3.6DAG3000-128S接口及指示灯介绍 (12)1.4组网应用 (13)1.5功能和特点 (13)1.5.1支持协议 (13)1.5.2语音传真参数 (14)1.5.3补充业务 (14)第二章基本操作 (15)2.1话机操作 (15)2.1.1拨打电话号码或分机号 (15)2.1.2IP地址呼叫 (15)2.2呼叫保持 (15)2.3呼叫等待 (16)2.4呼叫转移 (16)2.4.1盲转（Blind） (16)2.4.2询问转移（Attend） (16)2.4.3三方通话 (17)2.5操作码列表 (17)2.6发送和接收传真 (19)2.6.1DAG（FXS）支持四种传真模式： (19)2.6.2T.38和Pass-Through (19)第三章设备自助设置 (20)3.1IP地址查询 (20)3.2恢复出厂设置 (20)3.3设置IP地址 (20)第四章WEB配置 (22)4.1WEB登陆 (22)4.1.1登陆准备 (22)4.1.2登陆WEB (24)4.2状态和统计 (24)4.2.1系统信息 (24)4.2.2注册信息 (26)4.2.3TCP/UDP统计 (26)4.2.4RTP会话统计 (27)4.3快速配置向导 (27)4.4网络 (27)4.4.1本地网络 (27)4.4.2VLAN参数 (29)4.4.3Qos (31)4.4.4LAN Qos (31)4.4.4DHCP服务(路由模式下可选配置) (31)4.4.5DMZ主机(路由模式下可选配置) (32)4.4.6转发规则(路由模式下可选配置) (33)4.4.7静态路由(路由模式下可选配置) (33)4.4.8防火墙(路由模式下可选配置) (34)4.4.8地址解析 (35)4.5SIP服务器 (35)4.6端口配置 (37)4.7高级选项配置 (39)4.7.1FXS参数 (39)4.7.2媒体参数 (41)4.7.3SIP参数 (43)4.7.4传真参数 (47)4.7.5拨号规则 (48)4.7.6功能键 (50)4.7.7系统参数 (52)4.7.8Action URL (54)4.8呼叫和路由配置 (55)4.8.1通配组 (55)4.8.2端口组 (55)4.8.3IP中继 (56)4.8.4路由参数 (56)4.8.5IP-Tel路由 (57)4.8.6Tel-IP/Tel路由 (58)4.8.7IP->IP路由 (58)4.9号码变换 (59)4.9.1IP-Tel被叫号码 (59)4.9.2Tel-IP改变主叫号码 (60)4.9.3Tel-IP改变被叫号码 (62)4.10管理 (63)4.10.1TR069参数 (63)4.10.2SNMP参数 (63)4.10.3Syslog参数 (64)4.10.4云服务器 (66)4.11安全设置 (66)4.11.1WEB访问控制列表 (66)4.11.2Telnet访问控制列表 (67)4.11.3密码修改 (67)4.11.4加密配置 (68)4.12工具 (69)4.12.1固件升级 (69)4.12.2数据备份 (69)4.12.3数据恢复 (70)4.12.4Ping测试 (70)4.12.5Tracert测试 (71)4.12.6Outward测试 (72)4.12.7网络抓包 (73)4.12.8恢复出厂设置 (73)4.12.9设备重启 (74)第五章术语 (75)关于本文档本文档主要描述综合接入网关（IAD）设备的外观、功能特性、配置及维护操作方法。

LTE物理层信道检测算法总结文档

LTE物理层信道检测算法总结文档第一篇：LTE物理层信道检测算法总结文档信道均衡算法总结信道均衡技术研究的焦点主要集中在计算复杂度与误码性能的折中，即用最小的计算代价获得最优的检测效果。

为了恢复信号放送方的信息，接收端必须知道如下信息：1)信道的增益矩阵H。

2)加性高斯白噪声n。

信号接收信息Y可以表示：Y=Hx+n一、传统检测方法： 1.1、线性检测算法：线性检测思想：在MIMO系统的接收信号中，存在不同的发射天线间的信号的相互干扰。

相对于某一根发射天线的信号子流，其他天线上信号则看成干扰。

相对于某一根发射天线的信号子流，其他发射天线上信号则看成干扰，将接收信号乘以一个线性滤波矩阵，使得干扰信号从被检测信号中消除，这就是“干扰置零”的主要思想。

线性检测要求系统中的接收天线数N不小于发射天线数M，否则对于线性检测而言，即使在没有噪声的情况下也无法获得好的技术检测效果。

1.1.1 ZF算法线性迫零ZF算法是利用信道传输矩阵H的伪逆矩阵H+作为线性运算组合器来实现信号分离的一种检测算法。

迫零的译码算法就是找到一个加权矩阵W，使其满足以下关系：WiHj=1,i=jWiHj=0,i!=j其中Wi,Hj分别表示加权矩阵W的第i行与信道矩阵H的第j列(满足这个条件的加权矩阵就是H的伪逆矩阵H+)；ZF算法步骤如下：1)先根据上述原则得到并计算加权矩阵H+=(HHH)-1HH； 2)将加权矩阵左乘接收信号，式子变为H+r=s+H+n；3)直接利用公式S=Q(Hr)进行量化，从而对信号进行译码。

ZF算法把来自每个发送天线的信号当作希望得到的信号，而剩下的部分当作干扰，所以能够完全禁止各个之间的互扰。

1.1.2 MMSE算法为了改善ZF算法的性能，可以在设计滤波器矩阵的时候将噪声的影响考虑进去，这就是MMSE检测。

MMSE检测是通过滤波矩阵G的设计使得实际传输的信号和滤波输出信号之间均方误差MSE保持最小。

MMSE算法在一定程度上改善了迫零算法的性能，它是用一个新的矩阵HMMSE来代替迫零算法中的H.利用以下原则得到加权矩阵: +^+HMMSE=argmin(E{||HMMSEr-s||2})，其中E代表期望值。

TP-Link R系列企业级路由器主要功能配置实例说明书

为普联技术有限公司注册商标。

本手册提及的所有商标，由各自所有人拥有。

本手册所提到的产品规格和资讯仅供参考，如有内容更新，恕不另行通知。

除非有特殊约定，本手册仅作为使用指导，所作陈述均不构成任何形式的担保。

目录第1章前言 (1)1.1 目标读者 (1)1.2 本书约定 (1)1.3 适用机型 (1)第2章基础联网设置 (3)2.1 企业路由器基本设置指南 (3)2.1.1 应用介绍 (3)2.1.2 需求介绍 (3)2.1.3 设置方法 (3)2.1.4 注意事项 (7)2.2 企业路由器IPv6上网配置指导 (8)2.2.1 应用介绍 (8)2.2.2 需求介绍 (8)2.2.3 设置方法 (8)2.2.4 疑问解答 (15)第3章设备管理 (17)3.1 如何在外网远程管理（控制）路由器？ (17)3.1.1 应用介绍 (17)3.1.2 需求介绍 (17)3.1.3 设置方法 (17)3.1.4 注意事项 (20)3.1.5 疑问解答 (21)3.2 如何设置自动重启？ (22)3.2.1 应用介绍 (22)3.2.2 需求介绍 (22)3.2.3 设置方法 (22)3.2.4 注意事项 (23)第4章负载均衡 (24)4.1 多WAN口路由器负载均衡的设置指南 (24)4.1.1 应用介绍 (24)4.1.2 需求介绍 (24)4.1.3 工作原理 (24)4.1.4 设置方法 (25)第5章路由转发模块 (27)5.1 策略路由设置指南 (27)5.1.1 应用介绍 (27)5.1.2 需求介绍 (27)5.1.3 设置方法 (28)5.1.4 疑问解答 (31)5.2 ISP选路设置指南 (33)5.2.1 应用介绍 (33)5.2.2 需求介绍 (33)5.2.3 设置方法 (34)5.3 静态路由设置指南 (36)5.3.1 应用介绍 (36)5.3.2 需求介绍 (36)5.3.3 设置方法 (37)5.4 线路备份设置指南 (38)5.4.1 应用介绍 (38)5.4.2 需求介绍 (38)5.4.3 设置方法 (38)5.4.4 注意事项 (40)5.5 虚拟服务器设置指南 (41)5.5.1 应用介绍 (41)5.5.2 需求介绍 (41)5.5.3 设置方法 (42)5.5.4 疑问解答 (43)5.6 NAT-DMZ功能设置指南 (44)5.6.1 应用介绍 (44)5.6.2 需求介绍 (44)5.6.3 设置方法 (45)第6章AP和易展管理 (47)6.1 AP管理设置指南 (47)6.1.1 应用介绍 (47)6.1.2 需求介绍 (47)6.1.3 设置方法 (47)6.2 易展AP设置指南 (53)6.2.1 应用介绍 (53)6.2.2 需求介绍 (53)6.2.3 设置方法 (54)6.2.4 注意事项 (58)第7章行为管控 (59)7.1 连接数限制设置指南 (59)7.1.1 应用介绍 (59)7.1.2 需求介绍 (59)7.1.3 设置方法 (59)7.1.4 疑问解答 (60)7.2 访问控制设置指南 (61)7.2.1 应用介绍 (61)7.2.2 需求介绍 (61)7.2.3 设置方法 (61)7.2.4 疑问解答 (67)7.3 应用限制设置指南 (68)7.3.1 应用介绍 (68)7.3.2 需求介绍 (68)7.3.3 设置方法 (68)7.4 网址过滤设置指南 (71)7.4.1 应用介绍 (71)7.4.2 需求介绍 (71)7.4.3 设置方法 (71)7.4.4 疑问解答 (75)7.5 网页安全设置指南 (76)7.5.1 应用介绍 (76)7.5.2 需求介绍 (76)7.5.3 设置方法 (76)第8章安全防护 (78)8.1 ARP防护设置指南 (78)8.1.1 应用介绍 (78)8.1.2 需求介绍 (78)8.1.3 设置方法 (78)8.1.4 疑问解答 (84)8.2 MAC地址过滤设置指南 (86)8.2.1 应用介绍 (86)8.2.2 需求介绍 (86)8.2.3 设置方法 (86)第9章VPN模块 (88)9.1 IPSec VPN设置指南 (88)9.1.1 应用介绍 (88)9.1.2 需求介绍 (88)9.1.3 设置方法 (89)9.2 L2TP VPN设置指南 (96)9.2.1 应用介绍 (96)9.2.2 需求介绍 (96)9.2.3 设置方法 (97)9.3 PPTP VPN设置指南 (105)9.3.1 应用介绍 (105)9.3.2 需求介绍 (105)9.3.3 设置方法 (106)9.4 L2TP VPN代理上网设置指南 (115)9.4.1 应用介绍 (115)9.4.2 需求介绍 (115)9.4.3 设置方法 (115)9.5 PPTP VPN代理上网设置指南 (120)9.5.1 应用介绍 (120)9.5.2 需求介绍 (120)9.5.3 设置方法 (120)第10章认证管理 (125)10.1 一键上网设置指南 (125)10.1.1 应用介绍 (125)10.1.2 需求介绍 (125)10.1.3 设置方法 (126)10.2 短信认证设置指南 (130)10.2.1 应用介绍 (130)10.2.2 需求介绍 (130)10.2.3 设置方法 (131)10.3 Portal认证设置指南—使用内置WEB服务器和内置认证服务器 (136)10.3.1 应用介绍 (136)10.3.2 需求介绍 (136)10.3.3 设置方法 (137)10.4 Portal认证设置指南—使用内置WEB服务器和外部认证服务器 (141)10.4.1 应用介绍 (141)10.4.2 需求介绍 (141)10.4.3 设置方法 (142)10.5 Portal认证设置指南—使用外置WEB服务器和内置认证服务器 (146)10.5.1 应用介绍 (146)10.5.2 需求介绍 (146)10.5.3 设置方法 (147)10.6 Portal认证设置指南—使用外置WEB服务器和外置认证服务器 (150)10.6.1 应用介绍 (150)10.6.2 需求介绍 (150)10.6.3 设置方法 (151)10.7 免认证策略的使用方法 (154)10.7.1 应用介绍 (154)10.7.2 需求介绍 (154)10.7.3 设置方法 (155)10.8 Portal认证中，外部WEB服务器建立规范 (158)10.8.1 应用介绍 (158)10.8.2 流程规范 (159)第11章工业级特性 (163)11.1 如何使用工业级路由器？ (163)11.1.1 产品介绍 (163)11.1.2 需求介绍 (163)11.1.3 设置方法 (164)第12章其它功能 (168)12.1 地址组的设置与管理 (168)12.1.1 应用介绍 (168)12.1.2 需求介绍 (168)12.1.3 设置方法 (168)12.1.4 疑问解答 (170)12.2 带宽控制设置指南 (172)12.2.1 应用介绍 (172)12.2.2 需求介绍 (172)12.2.3 设置方法 (172)12.2.4 疑问解答 (175)12.3 PPPOE服务器应用设置指南 (177)12.3.1 应用介绍 (177)12.3.2 需求介绍 (177)12.3.3 设置方法 (178)12.3.4 疑问解答 (181)12.4 网络唤醒功能使用指南 (183)12.4.1 应用介绍 (183)12.4.2 需求介绍 (183)12.4.3 设置方法 (183)12.5 诊断工具使用指南 (186)12.5.1 应用介绍 (186)12.5.2 需求介绍 (186)12.5.3 设置方法 (187)第1章前言本手册旨在帮助您正确使用R系列企业级路由器。

linksys路由器配置文档

Linksys路由器配置文档注：如果安装地无网络，那么请先在办公室进行配置和调试，已达到测试路由器是否能联通网络1、首先把电脑跟linksys路由器进行联通，修改本地电脑IP跟路由器默认登录IP设置相配2、登录路由器设置界面，用户名：admin 密码：admin 进入后就可以看到一下界面注：连接电脑网线端口插1-4端口，internet（wan1）为网络信号接入端口，wan2端口为网络信号接入备用端口2、点击设置界面横条上的step按钮注：如果网络信号接入线插在wan1端口，请配置wan1端口的网络接入方式，如为wan2请配置wan2端口的网络接入方式，通常普遍的是PPOE宽带拨号方式，输入宽带帐号和密码即可4、配置VPN（点击设置界面横条上VPN按钮）5、然后点击”Add New Tunnel”6选择第一个点击”Add New”7、然后就可以开始配置VPN通道8、如果拨号方式选择为wan1，那么这里的设置也相对应选择wan1，然后在“Tunel Name”填入已经编写好的部门编号11、配置VPN识别参数12、最后点击保存设置并退出，然后重启路由器以上为门店linksys设备的设置接下来为杭州机电总部的设置流程：1、门店地址在总部的添加1、打开一个空IE，在地址栏上输入：122.224.110.133上图为输入该IP后弹出的窗口，用户和密码均为：hillstone 点击登陆2、登陆进去后，在左边点击对象→地址簿如图：3、在点击地址簿后，点击右边地址薄栏上的新建如图4、点击新建弹出了地址薄基本配子：在名称栏上输入需配子分店的路由IP/24（为了方便认知，名称也可随意设置）如图5、点击成员列表右下芳的添加，弹出如下图：类型选择IP地址，成员必须的需键通道分店路由的IP地址，支持通配符掩码为24不变，然后点击确定，完成该店地址薄的添加2、总部VPN的设置1、点击总部路由左边VPN→IPSec VPN 如图：2、在点击IKE VPN下边栏上的新建如图3、1）下面为VPN新建步骤1，如图：2）下面为VPN新建步骤2，如图：3、下面为防火墙→策略的添加1、点击总部路由左边防火墙→策略如图3、将源安全域改为：trust 和目的安全域改为：untrust，点右边的搜索，如图4、点击搜索右边的新建进去设置如图根据以上配置后，点确定5、将源安全域改为：untrust 和目的安全域改为：trust，点右边的搜索，如图6、点击搜索右边的新建进去设置如图根据以上配置后，点击确定最后把设置好的分机那到店里进行网络测试。

中国电信城域网设备技术规范——业务路由器

2.3.1 互联网业务的实现思路 ...........................................................................6
2.3.2 VPN 业务的实现思路..............................................................................7
7.4
L3 VPN ...........................................................................................................21
7.4.1 MPLS VPN .............................................................................................21
中国电信城域网设备技术规范－业务路由器
目录
1 编制说明 ..................................................................................1
1.1
范围 ................................................................................................................... 1
4 设备容量和接口要求 ..............................................................9
4.1
设备容量要求 ................................................................................................... 9

TP-LINK TD-W89841N 系列无线路由一体机详细配置指南

不得以任何形式或任何方式（电子、机械、影印、录制或其他可能的方式）进行商品传播或用于任何商业、赢利目的。

为深圳市普联技术有限公司注册商标。

本文档提及的其他所有商标或注册商标，由各自的所有人拥有。

本手册所提到的产品规格和资讯仅供参考，如有内容更新，恕不另行通知。

除非有特殊约定，本手册仅作为使用指导，本手册中的所有陈述、信息等均不构成任何形式的担保。

目录第一章产品概述 (1)1.1产品简介 (1)1.2主要特性 (2)第二章硬件描述 (3)2.1面板布置 (3)2.1.1前面板 (3)2.1.2后面板 (4)2.2复位 (5)2.3系统需求 (5)2.4安装环境 (5)2.5硬件连接 (6)第三章快速安装指南 (7)3.1建立正确的网络设置 (7)3.2快速安装指南 (8)第四章配置指南 (14)4.1启动和登录 (14)4.2运行状态 (14)4.3设置向导 (16)4.4网络参数 (16)4.4.1WAN口设置 (16)4.4.2以太网接入设置 (23)4.4.3分组设置 (29)4.4.4LAN口设置 (30)4.4.5MAC地址克隆 (32)4.4.6应用层网关设置 (33)4.4.7DSL参数设置 (33)4.4.8PVC自动检测 (34)4.5DHCP服务器 (35)4.5.1DHCP服务设置 (35)4.5.2客户端列表 (36)4.5.3静态地址分配 (36)4.5.4条件地址池设置 (38)4.6无线设置 (39)4.6.1基本设置 (39)4.6.2QSS安全设置 (41)4.6.3无线安全设置 (53)4.6.4无线MAC地址过滤 (55)4.6.5无线高级设置 (57)4.6.6无线主机状态 (58)4.7IPTV设置 (58)4.8路由功能 (59)4.8.1默认路由设置 (59)4.8.2静态路由表 (60)4.8.3RIP设置 (61)4.9转发规则 (62)4.9.1虚拟服务器 (62)4.9.2特殊应用程序 (64)4.9.3DMZ主机 (65)4.9.4UPnP设置 (66)4.10家长控制 (67)4.11防火墙 (69)4.11.1规则管理 (69)4.11.2内网主机 (72)4.11.3外网主机 (73)4.11.4日程计划 (75)4.11.5攻击防护 (76)4.12IP带宽控制 (77)4.12.1控制设置 (77)4.12.2控制规则 (78)4.13IP与MAC绑定 (80)4.13.1静态ARP绑定设置 (80)4.13.2ARP映射表 (81)4.14动态DNS (82)4.15诊断工具 (83)4.16系统管理 (84)4.16.1系统日志 (85)4.16.2时间设置 (85)4.16.3管理控制 (86)4.16.4备份和载入配置 (88)4.16.5恢复出厂设置 (90)4.16.6软件升级 (90)4.16.7重启路由器 (91)附录A FAQ (92)附录B IE浏览器设置 (96)附录C规格参数 (98)产品概述第一章1.1 产品简介首先感谢您购买TD-W89841N ADSL无线路由一体机！TD-W89841N ADSL无线路由一体机是专为满足小型企业、办公室和家庭办公室的无线上网需要而设计的，它功能实用、性能优越、易于管理。

LINKSYS WRT300N路由器设置

Linksys WRT300N 安装配置图解（中文）2009-02-14 15:11:49| 分类：iT荟萃|字号订阅WRT300N产品包装内容：Wireless-N 宽带无线路由器安装光盘（附带诺顿网络安全特警）光盘的用户手册以太网线电源适配器快速安装说明有两种方法配置路由器。

你可以自选下面一种:1、运行安装光盘 - 把安装光盘放进光驱, 按屏幕上的提示操作。

2、用快速安装指南 - 如果你愿意, 你可以用路由器的Web配置功能。

跳到下面步骤一：一、连接路由器A：确保切断所有硬件的电源,包括宽带猫和电脑的电源B:把宽带猫的网线连到路由器的Internet接口（看下图C: 把网线的一端连到路由器后面的几个接口中的一个。

把另一端接到电脑或者交换机的网口（看下图）D：打开宽带猫的电源: 把电源适配器连到路由器的电源插口，再把电源适配器插到电源插座上。

连接正确以后，前面板的电源指示灯会亮。

（见下图）补充E: 确保电源适配器是配套于路由器的，用其他不配套的电源适配器可能会损坏路由器F：打开你的电脑G: 把路由器放在合适的地方，最好的地点通常是你的无线网络的中心,使所有的设备都在视距之内。

二、配置路由器注意: 确保你电脑的网卡设置为自动获得IP地址（在网络连接属性里面设置，这个应该知道吧？）A：打开网页浏览器，在地址栏里输入http://192.168.1.1。

回车B：此时会跳出一个要求输入密码的对话框. 用户名一栏为空, 密码栏输入默认密码admin. (为了确保安全，你需要稍后设置一个新密码，在Web设置的Administration菜单下面，Management选项里面设置). 选OKC：这时候会出现Setup菜单。

如果你的服务提供商要求的话，填入主机名和域名。

（通常ADSL提供商会有要求），否则就空着不填D：在网络连接类型设置里面, 下拉菜单提供了6种类型.每种连接类型的安装屏幕和可用功能都不同.下面有详细说明：网络连接类型（6种）：1、自动配置 - DHCP:如果你通过DHCP服务器或者动态IP连接，保持这个选项为默认2、静态 IP: 如果你的服务提供商给你的是静态IP，从下拉菜单里选 Static IP。

Linksys RE9000 三带无线扩展器用户指南说明书

Model # RE9000ContentsProduct Overview (3)Front (3)Side (4)Back (5)How to Install the Range Extender (6)Setting up as a wireless range extender (6)Setting up as wired range extender (access point) (15)How to Access the Settings Interface (17)Using Range Extender Settings (19)WPS (20)Access Control (22)Troubleshooting (23)You cannot get your range extender connected (23)You cannot access your range extender (23)You have intermittent connection problems (25)Specifications (26)RE9000 (26)Environmental (26)Product OverviewYour Linksys RE9000 is a tri-band range extender with band steering. That means it will direct connected devices to the extended Wi-Fi band that will provide the best performance. The range extender will balance connected devices between one 5 GHz band and the 2.4 GHz band. (The second 5 GHz band is dedicated to the connection with your main router.) Band steering is available on all three bands when you set up your RE9000 as an access point.FrontThe light on the front of the range extender gives you information about power, updating and readiness.Power Light Status/ descriptionBlinking Green •Starting up.•Updating firmware.Solid Green •Good signal from router.Solid Orange •Weak signal from router.Fix: Unplug the extender, and move it closer to the router.Blinking Orange •Ready for setup / Not connected to router / Other errorFix:1. Make sure your router has an Internet connection and Wi-Fi is turned on.2. If the router is in order, unplug the extender, move it closer to the router, plug itback in, wait one minute, reconnect to your network.WPS™ button—Use Wi-Fi Protected Setup to automatically and securely add compatible wireless devices to your network.Ethernet ports (1)—Connect wired devices to these ports with ethernet cables.Power Light Status/ descriptionOff•No link over ethernet cable or no data activity.Solid Green•Established link over ethernet cable.Blinking Green•Sending/Receiving data.Reset button (2)—Press and hold until the light on the front of the range extender blinks to reset extender to factory default settings.Power port (3)—Connect the included AC power adapter.How to Install the Range ExtenderThere are two ways to use your Linksys range extender: as a wireless range extender or as a wired range extender (access point). Wireless range extenders repeat existing Wi-Fi signals. Wired range extenders (access points) create new Wi-Fi hotspots when connected to a router or access point with an ethernet cable. Both scenarios require a router with a working internet connection.Before starting setup, decide whether you want to use your RE9000 as a wireless range extender or as a wired range extender (access point). Instructions for both setups are in this user guide. Setting up as a wireless range extenderWi-Fi Protected Setup (WPS)Does your router have a WPS button?WPS is a simple way to connect Wi-Fi devices. Routers that support WPS have a button that might look like one of these symbols:If your router has a WPS button, continue with WPS below.If not, or if you are not sure, continue with browser-based setup on page 10.Note—The WPS button will not work if you have disabled WPS on your router, or if you have chosen WEP as your network security type. In either case, continue with browser-based setup on page 10.1.Plug the range extender into an electrical outlet close to your router. You can move therange extender to an ideal location later in step 5. After the range extender is plugged in, the light on the top will blink green for up to a minute.2.Wait for the light on the front of your range extender to blink orange before going tostep 3. This can take up to a minute.3.Extend your network.Press the WPS button on your router. Within the next two minutes press the WPS button on the side of your range extender.The WPS button will light up and the light on the top of your range extender will blink green.Watch the light on the top of your range extender to verify whether the connection was successful.If it turns solid green, the connection was successful. Move to step 4.If it starts to blink orange , the connection failed. You may try again by repeatingstep 3 or try browser-based setup.4.Move your range extender to an ideal spot.Unplug your range extender and plug it back in midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars(around 50%) of your router’s Wi-Fi signal at that location. If you don’t have two bars, move the range extender closer to the router.5.Check the light on the top of the extender for connection quality.It can take up to a minute for the ranger extender to boot up after moving it. During this period, you will see the blinking green light once again.o Solid green Ready to use.o Solid orange Weak connection to the router. Find an outlet closer to yourrouter.o Blinking orange Not connected to the router. Find an outlet closer to yourrouter.6.Connect your Wi-Fi devices to the extended network you just created.If you have setup your range extender with a Linksys Max-Stream Router, you don’t have to do anything. Max-Stream routers support seamless roaming, and your extended Wi-Fi network shares the same network name and password. Connected devices will select the main or extended network as you move around the coverage area.Note—Your Linksys RE9000 is a tri-band range extender with band steering. That means it will direct connected devices to the extended Wi-Fi band that will provide the bestperformance. This range extender will balance connected devices between one 5 GHz band and the 2.4 GHz band. (The second 5 GHz band is dedicated to the connection with your main router.) Band Steering is available on all 3 bands when you set up RE9000 as an access point.If you do not have a router with seamless roaming, select the extended network on your device's Wi-Fi manager. Extended networks are identified by "_Ext" added to the end of your main network name(s). Password(s) will be the same as those for your mainnetwork(s).Note—To learn more about seamless roaming and see a list of supported devices visit /seamless-roaming.Your range extender is now set up. Enjoy your extended Wi-Fi coverage.Browser-based setupUse this setup method if you don’t have a WPS button on your router, or if you don’t want to use WPS to set up your RE9000.1.Plug in the range extenderPlug in the range extender midway between your router and the area without Wi-Fi. Using your mobile device or laptop, be sure you have at least two bars (around 50%) of yourrouter’s Wi-Fi signal at that location. If you don’t have two bars, move the range extender closer to the router. You can move the range extender to an ideal location later using the setup software.2.Wait for the light on top of your range extender to blink orange.This can take up to a minute3.Connect to range extender setup network.On a computer, phone or tablet, connect to the Wi-Fi network: Linksys Extender Setup.unch setup.Enter (or try http://192.168.1.1) in a browser to complete setup. Follow the on-screen instructions:o Welcome to setup.o How do you want to use your range extender?o Choose your wireless network.o Enter your password for your wireless network.o Your extended wireless network.o Spot finder resultso Secure your range extender.o Register your product.o You are almost done.o Your extender is set up.Note—If you are not connected to your range extender’s setup network you will get apage alerting you that you haven’t connected to the extender. The page will ask whether you are trying to set up a new range extender or access settings on a range extender you already set up.Sometimes you will get a "404 Not Found" error page. If that happens, clear your browser cache and try again.5.Connect your Wi-Fi devices to the extended network you just created.If you have set up your range extender with a Linksys Max-Stream router, you don’t have to do anything. Max-Stream routers support seamless roaming, and your extended Wi-Fi network shares the same network name and password. Connected devices will select the main or extended network as you move around the coverage area.If you do not have a router with seamless roaming, select the extended network on yourdevice's Wi-Fi manager. Extended networks are identified by "_Ext" added to the endof your main network name(s). Passwords will be the same as those for your mainnetwork(s).Setting up as wired range extender (access point)Browser-based setup1.Prepare for setupBe sure your router has a working internet connection and you have an ethernet cable long enough to connect the router to the range extender.Note—Do not connect any devices other than your router to the range extender untilsetup is complete.2.Plug the range extender into a wall outlet.3.Wait for the blinking light on the top of the range extender to change from green toorange.e an ethernet cable to connect the range extender to the LAN port of your router.5.Connect to the Linksys Extender Setup network.On a computer, phone, or tablet, connect to the Wi-Fi network Linksys Extender Setup.unch setup.Enter (or try http://192.168.1.1) in a browser to complete setup. Be sure to choose “As a wired range extender (access point)” when asked how you want to use your range extender. Follow the on-screen instructions to create a network name and password for your access point.7.Connect your Wi-Fi devices to the extended network you just created.Select the extended network on your device's Wi-Fi manager. Extended networks are identified by "_Ext" added to the end of your main network name(s).Note—If your router’s MAC filtering feature is on you must enter the MAC address of the extender into the list of the router’s allowed addresses. That will allow the extender, and devices connected to extended networks, to connect to the main network.For speed and reliability, the RE9000 uses one of its 5 GHz bands as a dedicatedconnection to your router. The MAC address of the extender’s 5GHz band can be found on the Status > Upstream Network Statistics screen in your extender’s settings. Look for “Seen by Upstream AP.” The MAC address of the extender’s ethernet port is identified as Extender Mac Address on the Status > Device Info screen.Once the extender can access the router, all devices connected to the extender have access as well.How to Access the Settings InterfaceTo change or view range extender settings, first connect to an extended network, e.g.,MyWiFi_Ext. In a browser, go to and enter admin password.Your range extender's default admin password is "admin". We highly recommend that you change this after WPS setup. You will be asked to change it if you do browser-based setup.To change your admin password, click the Management tab of the settings interface and enter a new password under Extender Access.If you have not changed the range extender’s default name, you can also access the settings interface when connected to your main router.Enter into a browser http://RE90000 (Windows) or http://RE9000.local or (Mac OS X or iOS).If you changed your range extender’s name, you can access the settings interface by entering the new name in a browser. For example: if you named your extender MyExtender, enterhttp://MyExtender (Windows) or http://MyExtender.local (Mac OS X or iOS).You can also enter your range extender’s IP address in a browser. Find the IP address on your router’s administrative interface.Note—If you are not connected to your extended network you will get a page alerting you that you haven’t connected to the extender. The page will ask whether you are trying to set up a new range extender or access settings on a range extender you already set up.Sometimes you will get a "404 Not Found" error page. If that happens, clear your browser cache and try again.Using Range Extender SettingsClick Help on the right side of the screen for additional information on the screen’s options. Changes to settings will not be effective until you click Save at the bottom of the screen. You also can click Cancel to clear any changes.WPSWPS makes it easy to connect your extender to your network, and connect other devices to your network through the extender.Connecting the range extender to an existing access point or wireless router (see p. 6)Connecting devices to your network through the range extenderRepeat the instructions for each client device that supports WPS.1.Connecting with the WPS Buttona.Press the WPS button on the client device.b.Click the WPS button on the extender’s WPS screen, OR press and hold the WPSbutton on the side of the extender for one second. When the connection is complete,the light on the top of the range extender will be solid green for 20 seconds. If the lightblinks orange for two minutes, the connection failed. Go back to the previous step andtry again.c.If using the extender’s WPS screen, be sure to click OK within two minutes or you willhave to start over.2.Connecting with the client device’s PINa)Enter the PIN from the client device in the field on the extender’s WPSscreen.b)Click Register on the extender’s WPS screen. When the connection iscomplete, the light on the top of the range extender will be solid green for 20 seconds.c)Click OK on the extender’s WPS screen within two minutes or you will have tostart over.3.Connecting with the extender’s PINa)On the client device, enter the PIN listed on the extender’s WPS screen. (It isalso listed on the product label on the back of the extender.)b)Click OK on the client device’s WPS screen within two minutes.Access ControlAll devices connected to your range extender can access your Wi-Fi network if the extender can access the router. Use the Access Control feature to restrict certain devices. On the Wireless > Access Control screen you can specify the MAC addresses of devices to allow or deny.TroubleshootingYour range extender works on 2.4GHz and 5 GHz networks.You cannot get your range extender connectedCheck the position of your router and extender.•For first-time setup, you may need to place the extender closer to the router. After you’ve set up your extender, you can unplug it and move it to the final location.•To reduce signal obstructions, try alternate locations for the router and extender.•Avoid placing the router and extender near metal objects, masonry walls, and reflective surfaces such as glass or mirrors.•Avoid placing the router and extender near other electronics that may cause signal interference.If you’re using Wi-Fi Protected Setup to connect, wait until the WPS button light changes from solid orange to off before trying to make the connection again.You cannot access your range extenderTo access your range extender, you must be connected to your extended network. If you currently have wireless internet access, the problem may be that you have accidentally connected to a different wireless network.To fix the problem on Windows computers*:1.On your Windows desktop, click on the wireless icon in the system tray. A list of availablenetworks will appear.2.Click your extended network name. Click Connect. In the example below, the computer wasconnected to another wireless network named wraith_5GHz. Your extended network name, Damaged_Beez2.4_Ext in this example, is shown selected.3.If you are prompted to enter a network security key, type your password (security key) intothe network security key field. Click OK.4.Your computer will connect to the extended network, and you should be able to access therange extender’s settings interface.*Depending on your version of Windows, there could be some differences in wording or icons in these steps.To fix the problem on Mac computers, do the following:1.In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networkswill appear.2.In the example below, the computer was connected to another wireless network namedwraith_5GHz. Your extended network name, Damaged_Beez2.4_Ext in this example, is shown selected.3.Click the extended network name of your range extender (Damaged_Beez2.4_Ext in theexample).4.Type your wireless network password (Security Key) into the Password field. Click OK.You have intermittent connection problemsPlug in the range extender midway between your router and the area without Wi-Fi. Be sure you have at least 50% of your router’s Wi-Fi signal at that point on the device you used for setup. If you have two bars or lower, move closer to your router.To check the signal strength for individual devices connected to the extended network, go to the Status > Wireless Clients Table.SpecificationsRE9000Description Tri-Band Wireless-AC Range Extender Standards IEEE 802.11ac/a/b/g/nPorts 4 x Gigabit EthernetButtons Reset, Wi-Fi Protected Setup™Lights Power/Status, Wi-Fi Protected Setup,Ethernet (link, activity)Wireless Security WEP, WPA-Personal and WPA2-Personal EnvironmentalDimensions 170 mm x 136 mm x 45 mm(6.7 in x 5.35 in x 1.77 in)Weight .36 kg(.79 lb)Power External AC/DC power supply: 100-240V,2A, 50/60 HzCertification FCC , ICES 003, Wi-Fi (IEEE 802.11a/b/g/n),WPA2™, WMM®, Wi-Fi Protected Setup™ Operating Temp. 32 to 104°F (0 to 40°C)Storage Temp. -4 to 140°F (-20 to 60°C)Operating Humidity 10 to 80% non-condensingStorage Humidity 5 to 90% non-condensing Specifications are subject to change without notice.Visit /support/RE9000 for award-winning 24/7 technical support. BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here: /en-us/license. Please contact /en-us/gplcodecenter for questions or GPL source code requests.© 2017 Belkin International, Inc. and/or its affiliates. All rights reserved.LNKPG-00506 Rev. A00。

linksys系列路由器端口映射的设置

⾸先要找到路由器的地址,以及使⽤者的电脑的内IP地址,linksys路由器的隐含地址是192.168.1.1然后在IE的地址⼀栏输⼊你的路由器地址,例如192.168.1.1,点击GOIE会弹出窗⼝要求你输⼊路由器的登录名和密码linksys的出⼚隐含设置是, 登录名留空(leave it blank), 密码是admin1处标出了你路由器的型号2处要求你填⼊登录名, 如果你没改过,就遵循LINKSYS的出⼚设置,空⽩3处填⼊你设置的路由器密码.如果你没有改过,请填linksys出⼚设的admin然后点击"OK"如果密码正确,IE会进⼊Linksys的设置页⾯,在右上⾓落,会找到"Advanced"⼀栏,点击"Advanced"进⼊"Advanced"⼀栏后,在左上⽅第⼆个folder,你应该可以看到"Forwarding"的Folder,点击"forwarding",进⼊"Forwarding"⼀栏后.我们要做两个port forwarding,⼀个是TCP的port(EMULE隐含设置是4662),还有⼀个是UDP的Port(emule 隐含设置是4672)进⼊PORT FORWARDING后,我们需要做两个端⼝映象1给这两个端⼝映象随便取两个名字2.这⾥要填⼊EMULE需要的端⼝,第⼀⾏是TCP的端⼝,⽰范⾥填的是EMULE隐含的4662端⼝,第⼆⾏填⼊UDP端⼝,⽰范的是EMULE隐含的4672,你可以更改这两个端⼝,但要和EMULE⾥的设置⼀致3.这⾥填⼊从顶楼介绍⾥得到的你电脑的内IP地址,例如如果你得到的内IP是192.168.1.100,则仅仅需要在第4格填⼊100(有时电脑的内IP会发⽣变动,⼀旦发⽣变动,则需要回到此处更改这个IP地址来指向你新的IP)然后在图中打"X"的地⽅打上勾.最后,点击"APPLY"保存起来. 这样,端⼝映象就算完成了还有⼀个题外话,如果你在⽤EMULE的时候,发现有络DISCONNECT,⽽且LINKSYS路由器重启,你把路由器的FIRMWARE升级到最新的版本. 否则对路由器会造成伤害LINKSYS befw11s4的firmware最新版本是1.45,建议到linksys主页下载升级。

ER2100n企业级高性能无线路由器

ER2100n企业级⾼性能⽆线路由器ER2100n 企业级⾼性能⽆线路由器300M⾼速⽆线接⼊，便捷安全的“访客模式”⽀持802.11b/g/n⽆线技术，采⽤2X2 MIMO架构，提供⾼达300Mbps⽆线速率，更快的速度，更多的⽤户接⼊能⼒。

可拆卸双天线，⾼达5dbi增益全向天线，信号覆盖范围⼴，穿透能⼒强，环境适应能⼒⼴。

⽀持2个虚拟AP，可以针对不同的虚拟AP进⾏不同的策略控制，满⾜灵活的⽆线接⼊需求便捷安全的“访客模式”，将⼯作于“访客模式”的虚拟AP下的⽆线⽤户和办公⽹络隔离。

例如公司针对合作伙伴和供应商，开启“访客模式”虚拟AP，提供他们必须、受限的⽹络访问和外⽹访问能⼒，⼜能保护企业的内⽹信息安全。

⽀持丰富的上⽹⾏为管理功能ER2100n⽀持⽹站过滤功能（⿊、⽩名单），⽀持对关键字的精确匹配和模糊匹配两种⽅式，⽽且⽀持⽹站过滤的特权IP配置；ER2100n⽀持多种即时通信软件和⾦融软件的应⽤控制，如QQ/MSN/⼤智慧/分析家/同花顺/⼴发⾄强/光⼤证券/国元证券等⾦融软件的应⽤控制功能。

此外，⽤户可以通过对特权⽤户组的设置保证关键⽤户的使⽤不受影响。

IPSec VPN，分⽀节点接⼊ER2100n⽀持标准的IPSec VPN，⽤户可以通过简单的WEB配置实现端对端之间的安全的VPN连接，⽀持多种加密算法，是理想的分⽀节点接⼊设备。

ER2100n优化了IPSec VPN的配置步骤，通过简洁明了的配置向导，即使没有专业的⽹络知识也能轻松配置IPSec VPN连接。

H3C结合国内⽤户的组⽹特点在ER2100n上同时⽀持通过域名⽅式配置IPSec VPN连接和NAT-T的NAT穿越功能，即使双⽅没有固定IP地址也可建⽴IPSec VPN链接。

L2TP VPN,⽀持⽤户拨号接⼊ER2100n ⽀持L2TP拨号接⼊，⽅便企业出差员⼯访问公司内部服务器ARP病毒双重防护ER2100n通过IP<->MAC地址绑定功能，固定了⽹关的ARP列表，可以有效防⽌ARP欺骗引起的内⽹通讯中断。

家庭如何组建无线网络(WIFI)教程

家庭如何组建无线网络（WIFI）教程选择无线设备150M以上的均可。

300M的路由基本可以满足你的需求了，目前互联网接入速度最大10M。

所以150M 以上的足够用了。

考虑无线设备间的文件传输所以就不要考虑150M一下的设备了。

8米距离一面墙。

一般情况下一根天线也OK。

主要是你说的墙是普通的隔断还是承重墙。

或者说需要穿的墙体内钢筋水泥的多少直接影响无线连接效果。

一堵实心墙单天线的的无线信号就得衰减百分之六十左右，想要好点的就TP-link，D-link，贵一点，一百多，再好的也用不到了，想要性价比高点的就是水星的不错，记得好像水星有款三天线的价格在100以下,现在有些无线路由器已经做到“无天线"设计了。

通信质量和多天线的一样好。

如果只是两口人用。

一台笔记本两个手机的话普通国产150无线路由器就可以。

如果经常下载。

挂迅雷、PT的话建议购买200元左右的产品，绝对的一分钱一分货。

连接无线路由器由于将暂时断开Internet 连接，所以请在进一步操作之前打印这些说明。

首先，找到电缆调制解调器或DSL 调制解调器，并拔出以将其关闭。

接着，将无线路由器连接到调制解调器。

调制解调器应该可以立即连接到Internet。

稍后，等一切都连接好之后，计算机将以无线方式连接到路由器，而路由器将通过调制解调器向Internet 发送通信。

接下来，将路由器连接到调制解调器：注意：以下说明适用于Linksys 无线路由器。

您的路由器上端口的标签可能不同，图像也可能不同于您的路由器。

有关其他帮助信息，请参阅设备附带的文档。

•如果您的计算机目前已直接连接到调制解调器：从计算机后部拔出网线，然后将其插入路由器后部标签为Internet、WAN 或WLAN 的端口。

•如果计算机目前没有连接到Internet：将路由器附带网线的一端插入调制解调器，将另一端插入无线路由器上的Internet、WAN 或WLAN端口。

•如果计算机目前已连接到路由器：将当前连接到路由器上Internet、WAN 或WLAN 端口的网线拔出，再将此端插入无线路由器上的Internet、WAN 或WLAN 端口。

设置路由器92.168.1.1进不去的故障

设置路由器：解决192.168.1.1进不去的故障(1)设置路由器92.168.1.1进不去的故障(1)2011-09-06 09:48 佚名网易我要评论()字号：T | T你是否遇上过这样的问题：初次设置路由器，无法访问路由器的管理页面，也就是192.168.1.1进不去了，那么这个情况该如何解决呢？AD：192.168.1.1进不去的原因当你访问/welcome.htm或welcome.htm或http://192.168.1.1页时，浏览器提示：无法显示该页面，总结起来，导致192.168.1.1进不去问题的原因通常是以下几种：1.用来设置路由器的电脑的TCP/IP属性设置有误；2.设置路由器的电脑的TCP/IP设置无误，路由器连接到ADSLMODEM，由于MODEM的设置与路由器的默认设置存在冲突，导致无法进入路由器的设置页面；3.路由器用于现有网络中，此网络为192.168.1.0网段，与路由器的局域网网络相同；4.浏览器中设置了代理服务器；5.设置路由器的电脑使用了多块网卡，网卡的TCP/IP设置有误；192.168.1.1进不去排除原因1：在设置路由器前，首先要对用来管理路由器的电脑进行网络属性的配置,下面以WindowsXPHomeEditionServicePack2为例来说明电脑的TCP/IP配置过程：启动电脑，右键单击桌面或“开始”中的“网上邻居”选“属性”，注：不必理会其他的诸如“1394连接”，“无线网络连接”等其他连接，只针对“本地连接”完成此操作。

2.右键单击“本地连接”选“属性”，选中“Internet协议(TCP/IP)”，点击“属性”：3.将电脑设为“自动获得IP地址”，“自动获得DNS服务器地址”点击“确定”：4.然后右键单击“本地连接”选择“状态”，查看“支持”：注：若设置路由器无误，地址类型、子网掩码及默认网关都应与上图相同，IP地址则不一定是192.168.1.3，但应是192.168.1.×（×为2～254之间的某个数值）5.跟着在DOS命令行中通过ping来检测电脑与路由器的连接。

Linksys EA9350 用户手册说明书

ContentsProduct Overview (3)Front (3)Back (4)Side (5)Setting Up: Basics (6)Where to find more help (6)How to install your router (7) (10)How to log in to (10)Network Map (12)Guest Access (12)Parental Controls (13)Media Prioritization (13)Speed Test (14)External Storage (14)Connectivity (15)Troubleshooting (15)Wireless (16)Security (16)Troubleshooting (17)Your router was not successfully set up (17)Your Internet cable is not plugged in message (18)Cannot access your router message (19)After setup (20)The internet appears to be unavailable (20) does not open in your web browser (21)Specifications (22)Linksys EA9350 (22)Environmental (22)Product OverviewFrontStatus light—Gives you information about the router’s operation.Light description StatusOff Power offBlue (blinking) Router starting upBlue (solid) Read ready for setup / Connected to internet Red (solid) No internet from modemRed (blinking) Cable disconnected from modemWPS light—The light provides information about WPS pairing activity.WPS light description StatusOff No WPS activityWhite (blinking) WPS in progress (blinks for up to 2 minutes) Orange (blinking) WPS error (blinks for 1 minute)White (solid) WPS success (goes off after 5 seconds)Reset button (1)— To factory reset your router, press and hold while the light on front of the router blinks red. Do not release the button until the light goes out and then turns bright red.Internet port (2)—Connect an ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband or fiber modem.Note—For best performance, use CAT5e or higher rated cables on the internet port.Ethernet ports (3)—Connect ethernet cables to these blue gigabit (10/100/1000) ports, and to wired devices on your network.Note—For best performance, use CAT5e or higher rated cables on the ethernet ports.Power port(4)—Connect the included AC power adapter.USB 3.0 ports (5)—Connect and share a USB drive on your network or on the internet.Ethernet activity lights (6)—Blink when there is traffic over an ethernet port.Power switch (7)—Press | (on) to turn on the router.Wi-Fi Protected Setup button— Press to connect WPS-enabled network devices.Setting Up: BasicsWhere to find more helpIn addition to this user guide, you can find help at these locations:•/support/EA9350 (documentation, downloads, FAQs, technical support, live chat, forums)•Go to and click Help at the top of the screen)Note—Licenses and notices for third party software used in this product may be viewed on/en-us/license. Please contact /en-us/gplcodecenter for questions or GPL source code requests.How to install your router1.To complete setup, you will need a computer to visit in a webbrowser.2.Identify your equipment.If you have a separate modem and standalone router, disconnect and remove your old router. If you have a modem-router, leave itconnected.3.Position the antennas straight up and plug in the router to a power source. Make sure thepower switch in the | (on) position.4.Connect your router to your modem or modem-router. Plug one end of the included internetcable to the yellow Internet port on your new router. If you have a modem, plug the other end into the Ethernet (LAN) port on the modem. If you have a modem-router, plug into any available port.5.Wait until the light on the front of your router stops blinking and is solid blue.6.Connect to the Wi-Fi name shown in the Quick Start Guide that came with your router. (Youcan change these details later.) This information is also on a sticker on the bottom of your router.Note—You will not have internet access until router setup is complete.7.Enter in a web browser. Follow the on-screen instructions tocomplete your router setup. You also can type 192.168.1.1 in a browser to start setup.At the end of setup, follow the on-screen instructions to set up your Linksys account. View and change router settings from any computer with an internet connection by going to. You can also use the Linksys app on your phone to manage your router. Manage your router’s settings:•Change your router’s name and password•Set up guest access•Configure parental controls•Connect devices to your network•Test your internet connection speedNote—Y ou will receive a verification e-mail when you create an account. From your home network, click the link in the email to connect your router with your account.Tip—Print the next page, then record your router and account settings in the table below as a reference. Store your notes in a safe place.2.4 GHz Wi-Fi Name Password5 GHz Wi-Fi Name PasswordRouter PasswordGuest 2.4 GHz Wi-Fi Name PasswordGuest 5 GHz Wi-Fi Name Password Username PasswordYou can configure your router from anywhere in the world at , but you can also configure your router directly from your home network. You can also use the Linksys app for iPhones and Android devices. See your device’s app store for information.How to log in to 1.Open your computer’s web browser.2.Go to and log in to your account.If you can’t remember your password, click Forgot your password?and follow the on-screen instructions to recover it. For help, go to and click Help at the top of the main screen.IMPORTANT—Once you have installed your router and logged in to , be sure to enable HTTPS under Local Management Access. This boosts security when accessing your router locally (without the internet).After logging in to , go to Connectivity > Administration and check the box next to HTTPS under Local Management Access. Be sure to click Apply in the bottom right of the screen.Network MapDisplay and manage all network devices connected to your router. View devices on your main network and guest network, or display information about each device.Guest AccessSet up and monitor a network that guests can use without accessing all of your network resources.Parental ControlsBlock web sites and set internet access times.Media PrioritizationSet which devices and applications have top priority for your network traffic.Speed TestTest your network’s internet connection speed.External StorageAccess an attached USB drive (not included) and set up file sharing, media server, and FTP access.ConnectivityManage basic and advanced network settings.TroubleshootingDiagnose problems with your router and check the status of the network.WirelessChange your router’s security mode, password, MAC filtering settings, and connect devices using Wi-Fi Protected Setup.SecuritySet up your router’s wireless security. Set up a firewall, VPN settings, and make custom settings for applications and games.TroubleshootingYou can find more help from our award-winning customer support at /support/EA9350. Your router was not successfully set upIf you could not complete the setup wizard, you can try the following:•Press and hold while the light on front of the router blinks red. Do not release the button until the light goes out and then turns bright red. When the LED turns solid blue, installthe router again.•Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router again.•If you have another computer, use that computer to install the router again.Your Internet cable is not plugged in messageIf you get a “Your Internet cable is not plugged in” message when trying to set up your router, follow these troubleshooting steps.•Make sure that an ethernet cable (like the one supplied with your router) is securely connected to the yellow Internet port on the back of the router and to the appropriate port on your modem.This port on the modem is usually labeled Ethernet, but may be named Internet or WAN.•Make sure that your modem is connected to power and is turned on. Make sure the power switch is set to the ON or l (as opposed to O) position.•If your internet service is cable, verify that the cable modem’s CABLE port is connected to the coaxial cable provided by your ISP.•If your internet service is DSL, make sure that the DSL phone line is connected to the modem’s DSL port.•If your computer was previously connected to your modem with a USB cable, disconnect the USB cable.•Install the router again.Cannot access your router messageTo access your router, you must be connected to the router’s network. If you have wireless internet access, the problem may be that you have accidentally connected to a different wireless network.To fix the problem on Windows computers, do the following*:1.Click on the wireless icon in the system tray. A list of available networks will appear.2.Click your own network name. Click Connect. In the example below, the computer wasconnected to another wireless network named wraith_5GHz. The wireless network name of the Linksys EA9350 router, Damaged_Beez2.4 in this example, is shown selected.3.If you are prompted to enter a network security key, type your password (security key) into thenetwork security key field. Click OK.4.Your computer will connect to the network, and you should be able to access the router.*Depending on your version of Windows, there could be some differences in wording or icons in these steps.To fix the problem on Mac computers, do the following:1.In the menu bar across the top of the screen, click the Wi-Fi icon. A list of wireless networks willappear.2.In the example below, the computer was connected to another wireless network namedwraith_5GHz. The wireless network name of the Linksys EA9350 router, Damaged_Beez2.4 in this example, is shown selected.3.Click the wireless network name of your Linksys EA9350 router (Damaged_Beez2.4 in theexample).4.Type your wireless network password (Security Key) into the Password field. Click OK.After setupThe internet appears to be unavailableIf the internet has difficulty communicating with your router, the problem may appear as a “Cannot find [Internet address]” message in your web browser. If you know that the internet address is correct, and if you’ve tried several valid internet addresses with the same result, the message could mean that there’s a problem with your ISP or modem communicating with your router.Try the following:•Make sure that the network and power cables are securely connected.•Make sure that the power outlet that your router is connected to has power.•Reboot your router.•Contact your ISP and ask about outages in your area.A common way to get your router working again is to reboot it (turn it off, then back on again).To reboot your router using the power cord:1.Disconnect the power cord from the router and the modem.2.Wait 10 seconds, and reconnect the power cord to the modem. Make sure it has power.3.Wait until the modem’s online indicator has stopped blinking (about two minutes). Reconnectthe power cord to the router.4.Wait until the light on top of the router stops blinking. Wait two minutes before trying to connectto the internet from a computer.To reboot your router at :1.Log in to . (See “How to log in to ” onpage 10.)2.Under Router Settings, click Troubleshooting.3.Click the Diagnostics tab.4.Under Reboot, click Reboot.5.Click Yes. The router will restart. While the router is restarting, all connected devices will losetheir internet connection, and will automatically reconnect when the router is ready again. does not open in your web browserMake sure you have the latest versions of Google Chrome, Firefox, Safari (for Mac and iPad), Microsoft Edge, or Internet Explorer.SpecificationsLinksys EA9350Model Name Linksys Max-Stream AX4500 Dual-Band WiFi 6 RouterModel Number EA9350Ethernet Port Speed GigabitRadio Frequency 2.4 GHz and 5 GHz# of Antennas 4 external adjustable antennasPorts USB 3.0 (x2), Ethernet (1-4), Internet, PowerButtons Power, Reset, WPSLights Front: One multicolor light for power/status, one WPS status lightBack: USB, Ethernet (1-4), InternetUPnP SupportedSecurity Features WPA2-Personal, WPA2-EnterpriseSecurity Key Bits Up to 128-bit encryptionStorage File System Support FAT, FAT32, NTFS, and HFS+Browser Support Latest versions of Google Chrome TM, Firefox®, Safari® (for Mac®and iPad®), Microsoft Edge, and Internet Explorer® version 8 andnewer work with Linksys Smart Wi-Fi EnvironmentalDimensions 280 mm x 170 mm x 60 mm (antennas down)280 mm x 170 mm x 160 mm (antennas up)Unit Weight 940 gPower 12V, 4ACertifications FCC, CE, Wi-Fi (IEEE 802.11a/b/g/n/ac)Operating Temperature 32 to 104°F (0 to 40°C)Storage Temperature -4 to 140°F (-20 to 60°C)Operating Humidity 10% to 80% relative humidity, non-condensingStorage Humidity 5% to 90% non-condensingSpecifications are subject to change without notice.Notes:For regulatory, warranty, and safety information, go to /support/EA9350.Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.BELKIN, LINKSYS and many product names and logos are trademarks of the Belkin group of companies. Third-party trademarks mentioned are the property of their respective owners. Licenses and notices for third party software used in this product may be viewed here:/en-us/license. Please contact /en-us/gplcodecenter for questions or GPL source code requests.© 2019 Belkin International, Inc. and/or its affiliates. All rights reserved.雙頻路由器 EA9350目錄產品概觀 (3)前板 (3)返回 (4)側面 (5)設定：基本知識 (6)如何尋找更多說明 (6)如何安裝您的路由器 (6) (9)如何登入 (9)網路地圖 (11)來賓存取 (11)家長監護 (12)媒體優先順序 (12)速度測試 (13)外部儲存 (13)連線能力 (14)故障排除 (14)無線 (15)安全性 (15)故障排除 (16)您的路由器設定失敗 (16)未插入網路線訊息 (17)無法存取您的路由器訊息 (18)設定後 (19)網際網路似乎無法使用 (19)網頁瀏覽器打不開。

tp-link TL-R4238 TL-R4239 TL-R4299G 说明书

目
录
物品清单 ......................................................................................1 第一章用户手册简介 ....................................................................2 1.1 用途 ................................................................................................... 2 1.2 约定 ................................................................................................... 2 1.3 用户手册概述 ..................................................................................... 3 第二章产品概述 ...........................................................................4 2.1 产品简介 ............................................................................................ 4 2.2 特性和规格说明 ................................................................................. 5 2.2.1 主要特性 ......................................................................................... 5 2.2.2 规格 ................................................................................................ 6 第三章硬件安装 ..........................................................................9 3.1 面板布置 ............................................................................................ 9 3.1.1 前面板............................................................................................. 9 3.1.2 后面板........................................................................................... 10 3.2 系统需求 .......................................................................................... 11 3.3 安装环境 .......................................................................................... 11 3.4 硬件安装步骤 ................................................................................... 12 第四章快速安装指南 ..................................................................14 4.1 建立正确的网络设置 ........................................................................ 14 4.2 快速安装指南 ................................................................................... 16 第五章配置指南 .........................................................................19 5.1 启动和登录....................................................................................... 19 5.2 运行状态 .......................................................................................... 20 5.3 设置向导 .......................................................................................... 21 5.4 网络参数 ......................................................................................... 21