Wellhead Design Slideshow

合集下载

展览设计发包图英文

展览设计发包图英文, 标注英汉对照图纸施工图 Implementation drawing 平面位置 Graphic position 平面清单Graphic detail CAD布局图 Plan_layout 顶部布局 Ceiling_layout 大会平面图Hall plan layout 家具清单 Furniture list 详图 Detail 详图3，见第5页Detail 3, See page 5 立面图 Elevation 效果图 Perspective view 左面 Left side 右面 Right side 背面 Back side搭建部分全型材制作 All Octanorm made 全木工制作 All wooden made 天花板Ceiling 型材天花 Octanorm Ceiling 墙板 Wall panel (双面)灯箱 (Double side)Light box 旋转灯箱 Revolving Light box 不是灯箱 NOT light box 植物(大) Plant(L) 植物(中) Plant(M) 植物(小) Plant(S) (外挂)木工板 Wooden board(outside) 透明压克力 Transparent Acrylic 磨沙压克力 Frozen Acrylic 奶白压克力 Milk Acrylic 布帘 Curtain 型材制作 Octanorm made 大方柱:80mm Square extrusion:80mm 不锈钢 Stainless steel 金属材质 Metal 铝 Aluminum 木地板 Wood floor 玻璃板 Glass boardDoppelstaeg Platte Klar (只适用于欧洲) 透明阳光板Doppelstaeg Platte OPAL (只适用于欧洲) 半透阳光板1Doppelstaeg Platte MILK (只适用于欧洲) 白色阳光板棉线 Cotton Strings 衍架 Truss广告钉 Steel nail 木地板 Wood floor 枫木表面 Maple surface 贴防火板Laminate wooden board 外刷漆(普通漆) Painting wood surface 乳胶漆，清漆Varnish wood surfaceGlossy spray painting 光面喷漆(烤漆)标准型材天花 Standard ceiling 木工天花 Wooden ceiling 楼梯 Stairs 扶手 Handrail 场馆柱子 Hall pillar 灯柱 Lamp post 木工条 Wooden bar 从场馆顶上吊下来 Hung from hall ceiling (场馆的)吊点 Suspension point 铁网Steel net 沙子 Sand石头 Stone管子 Tube杆子 pole展示部分洞洞板+N个挂钩 Peg board，N hooks 槽板+N个挂钩 Slat wall + N hooks 铁网 Steel net 挂钩 Hook平层板 Flat shelf 斜层板 Sloping shelf 玻璃平层板 Flat glass shelf 木工制作 Wooden made 矮柜 Cabinet 展示台/地台 Platform 展示柜 showcase 家具部分圆会议桌 Meeting table( 800) 方会议桌 Meeting table(700x700) 会议椅Meeting chair 吧台 Bar table 吧椅 Bar stool 折叠椅 Folding chair2单人沙发 Single sofa 双人沙发 Double sofa 茶几 Tea table 接待台Info-counter 矮柜 Cabinet 资料架 Catalog holder 烟灰缸 Ashtray 垃圾篓Waste bin 冰箱 Refrigerator 空调 Air-conditioner 挂衣架 Coat hanger 落地衣架 Floor coat hanger 等离子+DVD Plasma+ DVD 投影机 Projector 投影幕projector screen 咖啡机 Coffee maker 烧水壶 Teakettle 饮水机+2桶水Water dispenser + 2 buckes of water水槽 Sink Unit 电视架 TV rack 百叶窗 Window blind 木门 Wooden door折叠门 Folding door 移门 Sliding door 果盆 fruit dish 一次性杯子 One-off cup 带锁 With lock 不带锁 Without lock平面部分:挂布/绷布 Fabric 写真 Digital printing 色条 Strip 即时贴刻字Lettering 泡沫3D字 Foam 3D Letters (厚度 thickness)发光3D字 Illuminated 3D letters 磨沙条 Frozen Strip(semi-transparent)磨沙即时贴 Frozen lettering 备份 For back-up电力部分电箱 Main power 插座 Socket 网络插座 Network socket 长壁射灯150W/300W long arm light 150W/300W3轨道射灯 100W Spot light 100W 日光灯管 40W F/L light tube 40W 卤素灯150W/300W Halogen 150W/300W 白光卤素灯 HQI 高强度白光卤素灯 HQI(High power) 珠宝灯 Small spotlight 筒灯 Down light 吊灯 Drop lamp 落地灯Floor lamp 电线 Cable文字说明Thickness 厚度Fixed on the ground 固定在地面上Attention please 注意事项Sliding door with lock 移门带锁Delivered from customer 客户自带Product from customer 客户产品Delivered from stand builder 由搭建方提供NOT see though 不透明Semi-transparent 半透明Loading weight 承重Every meters loading weight 每一米承重All light must be white light 所有灯光都要是白色Please ensure the lights of the stand is bright enough 确保摊位的灯光足够亮Sliding door with lock 移门加锁NO separation for logo and company name LOGO和公司名字中间不能被分开The cable for plasma for computer from stand builder Plasma和笔记本电脑连线由搭建方提供One light controlled by a single switch 一个开关控制一个灯Wooden floor connection area all side edge need cover with 木地板周围需要金属包边alloy flangeThere should be some sockets for customer’s machines 需要留有插座来供客户的产品使用One shelf in storage room 储藏室里有一块层板One coat hanger in storage room 储藏室里有一个衣架One cabinet in storage room 储藏室里有一个矮柜Info-counter with 4 feet. Can be moved by customer 接待台是可以移动的The table board is not fixed. It can be tack up by customer 台面不要封死，可以掀开All the product need to set up an electric circuit. 所有产品需要通电Make a hole on the wall for throughing the cables 墙面需要开洞走电线Make a door on backside for installing the cables 背面需要开门排线The graphics delivered from customer. We put it on 平面由客户提供，我们贴Light box with LOGO/Digital printing on double side. 灯箱正反面都有LOGO/写真Curtain for hiding the main power. 这块布帘用来遮挡电箱4Please provide Meeting tables and chairs same like the 桌椅请用和照片上一样的photoDo NOT put this wall panel on until the customer arrive. 在客户到之前不要安装这块墙板Do NOT put this acrylic on until the products be installed by 在客户产品安装之前不要装上压克customers. 力Do NOT stick on this graphic until the customer arrive. 在客户到之前不要贴这块平面All the electric socket must be three pins socket. 所有插座必须是三眼插座This socket mus t be installed on the wall, height:… 这个插座必须安装在墙上，高度:… Digital printing / Lettering cover out of the pillar. 写真/及时贴覆盖在pillar外KAPA board with digital printing 写真带KT板The installation way of the module can be seen as on the 组件的安装方式如图所示:组件要固picture: The module should be fixed in the middle of the 定在亚克力框架中间Acrylic frame.The panel can be rotated manually. 组件可以被手动旋转The bottom shelf of the book shelf is not necessary. 书架中不需要最下面的那层板The sponser will offer the charge-free showcase to put the 主办方将提供免费展柜来摆放电视。

原创顶级唯美微立体动态制造业风格内训课件ppt模板

输入标题
在这里输入内容……
在这里输入标题
在这里输入标题
在这里输入内容…… 在这里输入内容……
在这里输入标题
在这里输入内容…… 在这里输入内容……
在这里输入标题
在这里输入内容…… 在这里输入内容……
在这里输入标题
输入标题
• 在这里输入内容…… • ……
输入标题
• 在这里输入内容…… • ……
输入标题
VS
输入标题
在这里输入内容…… 在这里输入内容……
在这里输入标题
输入标题
在这里输入内容…… 在这里输入内容…… 在这里输入内容…… 在这里输入内容……
输入内容输入内容
输入标题
在这里输入内容…… 在这里输入内容…… 在这里输入内容…… 在这里输入内容……
在这里输入标题
输入标题
在这里输入内容…… 在这里输入内容……
• 在这里输入内容…… • ……
输入标题
• 在这里输入内容…… • ……
输入标题
• 在这里输入内容…… • ……
在这里输入标题
在这里输入补充内容
在这里输入标题
输入标题
在这里输入内容…… 在这里输入内容……
输入标题
在这里输入内容…… 在这里输入内容……
在这里输入标题
输入标题
在这里输入内容…… 在这里输入内容……
LOGO
在这里输入PPT标题
DESIGNED BY PINGTOUGE
Search
Name Surname
LoremIpsum LoremIpsum LoremIpsum
LoremIpsum LoremIpsum LoremIpsum LoremIpsum LoremIpsum LoremIpsum

DS-3T0306HP-E HS 4-Port 100M Unmanaged Hi-PoE 交换机的

DS-3T0306HP-E/HS switches are layer 2 Hi-PoE switches,providing advanced PoE power supply technology andwider temperature (-30 to 65 °C) design on the basis ofhigh-performance access to ensure stable data upload.The switches support Hi-PoE, long range, port isolation,and PoE watchdog function.Key Feature•3 × 100M PoE ports, 1 × Hi-PoE port, 1 × gigabit RJ45 port and 1 × gigabit SFP Fiber Optical Port.•IEEE 802.3at/af/bt standard for Hi-PoE port (Max. 60 W PoE output).•IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output).•IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard.•6 KV surge protection for PoE ports.•Up to 300 m long-range transmission.•PoE watchdog to auto detect and restart the cameras that do not respond.•Port isolation to improve network security.•Wire-speed forwarding.•Wider temperature (-30 to 65 °C) design.•Store-and-forward switching.•Solid high-strength metal shell.•Reliable fan-free design.SpecificationModel DS-3T0306HP-E/HSNetwork parameters Port number3 × 100M PoE ports, 1 × Hi-PoE port, 1 × gigabit RJ45 port and 1 ×gigabit SFP Fiber Optical PortPort type RJ45 port, full duplex, MDI/MDI-X adaptiveStandard IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab Forwarding mode Store-and-forward switchingWorking modeStandard mode (default), Extend mode, Isolation mode, PoEwatchdog modePorts for long-distancetransmissionPorts 3 and 4MAC address table 2 KSwitching capacity 4.8 GbpsPacket forwarding rate 3.5712 MppsInternal cache 1.0 MbitsPoE power supply PoE standardPort 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3btPorts 2 to 4: IEEE 802.3af, IEEE 802.3atPoE power pinPorts 1 to 4: Ethernet cables 1/2/3/6 and 4/5/7/8 provide powersupply simultaneously.PoE port Ports 2 to 4Hi-PoE port Port 1Max. port powerPort 1: 60 WPorts 2 to 4: 30 WPoE power budget 60 WDialing function Long range Ports 3 and 4: up to 300 m.Port isolation Ports 1 to 4: port isolation mode to improve network security.PoE watchdog Ports 1 to 4: auto detect and restart the cameras that do not respond.General Shell Metal material, fan-free designGross weight0.915 kg (2.02 lb)Net weight0.35 kg (0.77 lb)Dimension (L × H × D)158 mm × 101.2 mm × 31.6 mm (6.22” × 3.98” × 1.24”) Operating temperature-30 °C to 65 °C (-22 °F to 149°F)Storage temperature-40 °C to 85 °C (-40 °F to 185 °F)Operating humidity5% to 95% (no condensation)Storage humidity5% to 95% (no condensation)Power supply48 to 57 VDC, 1.35 A Max.Power consumption in idle< 5 WMax. power consumption 65 WPower source65 WApproval EMC FCC (47 CFR Part 15, Subpart B); CE-EMC (EN 55032: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013, EN 55024: 2010 +A1: 2015); RCM(AS/NZS CISPR 32: 2015); IC (ICES-003: Issue 6, 2016)Safety UL (UL 60950-1); CB (IEC 60950-1:2005 + Am 1:2009 + Am 2:2013); CE-LVD (EN 60950-1:2005 + Am 1:2009 + Am 2:2013)Chemistry CE-RoHS (2011/65/EU); WEEE (2012/19/EU); Reach (Regulation (EC)No 1907/2006)Physical Interface Front panel:Back panel:Available Model DS-3T0306HP-EDimension (unit: mm)Typical Application。

Company-presentation-template公司演示英文模板

Slide main title
Design inspiration For presentation
Powerpoint is a complete presentation graphic package it gives you everything you need to produce a professional-looking presentation
Stylish design
Slide main title
Design inspiration For presentation
Our user-friendly and functional search engine helps you locate the right templates, effectively saving your time.
Slide main title
Design inspiration For presentation
Our user-friendly and functional search engine helps you locate the right templates, effectively saving your time.
Our user-friendly and functional search engine helps you locate the right templates, effectively saving your time.
Stylish design
Stylish design
Stylish design
Slide main title
Design inspiration For presentation

雾气彩虹商务通用模板

1
2
1
2
主推人群Main push crowd
填写大标题
此处添加详细文本描写
填写大标题
此处添加详细文本描写
填写大标题
此处添加详细文本描写
填写大标题
此处添加详细文本描写
填写标题
Fill in the title
输入您要填写的内容
A
BUSINESS AFFAIRS
laugh graphic design thank you for buying this template, we mainly engaged in various types of advertising graphic design.
为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。为客户提供有效服务，是我们工作的方向和价值评判的标尺。
ENTER YOUR TITLE
ENTER YOUR TITLE
ENTER YOUR TITLE
ENTER YOUR TITLE
填写标题
Fill in the title
输入您要填写的内容
D
To compete in the challenging global environment,companies are changing their business processes by extending them to include other companies in the supply chain.

slideshow模版

slideshow模版如何有效管理你的时间。

时间是我们生命中最宝贵的资源之一，然而很多人却常常感觉时间不够用，总是在忙碌中度过，却没有实际的成果。

有效管理时间是每个人都需要学会的技能，它可以帮助我们更高效地完成工作，提高生活质量，实现更多的目标。

本文将从时间管理的重要性、时间管理的方法和技巧以及实践中的注意事项等方面进行探讨，希望可以帮助大家更好地管理自己的时间。

首先，让我们来看看时间管理为什么如此重要。

时间管理可以帮助我们更好地分配时间，提高工作效率。

在工作中，我们经常会遇到各种各样的事情需要处理，如果没有一个合理的时间安排，很容易陷入被动状态，导致工作效率低下。

而通过合理的时间管理，我们可以将工作分解为不同的任务，制定合理的计划，提高工作效率，更好地完成工作。

此外，时间管理还可以帮助我们更好地平衡工作和生活，避免过度工作导致身心俱疲。

那么，如何进行有效的时间管理呢？首先，我们需要学会设定优先级。

在面对各种任务时，我们需要将其按照重要性和紧急程度进行排序，然后合理安排时间。

其次，我们需要学会拒绝。

在工作中，我们经常会遇到各种各样的打扰，有时候我们需要学会婉拒一些不重要的事情，集中精力处理重要的任务。

此外，我们还需要学会制定计划。

制定计划可以帮助我们更好地安排时间，提高工作效率。

最后，我们需要学会专注。

专注可以帮助我们更快地完成任务，避免因为分心而浪费时间。

在实践时间管理的过程中，还需要注意一些问题。

首先，我们需要学会适应变化。

在工作中，我们经常会遇到各种意外情况，需要根据实际情况灵活调整计划。

其次，我们需要学会坚持。

时间管理不是一蹴而就的事情，需要我们长期坚持，不断总结经验，不断改进。

最后，我们需要学会放松。

适当的放松可以帮助我们更好地恢复精力，提高工作效率。

总之，时间管理是每个人都需要学会的重要技能，它可以帮助我们更好地安排时间，提高工作效率，实现更多的目标。

通过合理的时间管理，我们可以更好地平衡工作和生活，提高生活质量。

皮带机英文词汇

安全笼凹弧半径凹弧段凹曲线半径扳手半自动焊接刨床薄钢板包胶层八字形的变速机扁头楔键边支柱标牌，铭牌标准图标准型滚子链比例波型板部件部件图不锈钢彩板材料、物料残渣、废渣槽槽出口槽钢槽键槽角槽形托辊侧视超声波检测插销、挂钩衬板衬垫材料
第 3 页
falan falanzuo fancheji fangchenmifeng fangdianquan fanghuban fangjiaoluoshuan fangmohaoban fangxiang fangxingfalan fangyuzhao fanzhuanzhuangzhi feiyou fen/fenmo fengbicao fenmo fuban fushi G gaiban gaijirunhuazhi gaixiangguntong gangban gangdai gangdu gangjinghunningtu gangqiu gangsisheng gangsishengjuantong gangsiwang geban geiliaoluoxuan geilioaji gongcha gongzigang guabanqingsaoqi guancha guandao guanjietou
fixed enclosure guard fixed base fixed distance guard fixed rotating stacker track rail rail mounted stacker silica sand silica silicious raw material aggregate(gravel) rim of pulley roller tube roller path ring transition idler weld crack welding machine welding weldment welded flange content cross bar crossbeam arc-seam welding arc welding electrode arc cutting thick steel plate slipper parallel key blocks set impact idler pyrite ring plate arc-spot welding return idler temper mortar putty rotary kiln

(精品)ShoeDesign3D设计中文教程

Delcam Crispin ShoeDesign 培训手册目录ShoeDesign基本操作一、教学提示；教学要求---------------------------------------------------------------------------2二、3.1鞋面设计【Upper Design】-------------------------------------------------------31.1 档案【File】------------------------------------------------------------------------51.2 模组【Modules】---------------------------------------------------------------131.3 编辑设计【Edit Design】-------------------------------------------------------151.4 设计项目【Design Items】--------------------------------------------------------181.5 工具【Tools】-----------------------------------------------------------------------211.6 检视【View】----------------------------------------------------------------------251.7 帮助【Help】------------------------------------------------------------------------29鞋面设计范例---------------------------------------------------------------30三、3.2楦头处理【Last Processing】--------------------------------------------------642.1 档案【File】------------------------------------------------------------------------652.2 模组【Modules】-----------------------------------------------------------------662.3 楦头【Last】-------------------------------------------------------------------------662.4 工具【Tools】-----------------------------------------------------------------------692.5 检视【View】-----------------------------------------------------------------------692.5 帮助【Help】------------------------------------------------------------------------69楦头转换范例-----------------------------------------------------------------------------70四、3.3 鞋底设计【Sole Design】----------------------------------------------------763.1 档案【File】-------------------------------------------------------------------------------763.2 模组【Modules】------------------------------------------------------------------------783.3 编辑大底【Edit Sole】--------------------------------------------------------783.4 建大底【Creat Sole】------------------------------------------------------------793.5 修改大底【Advanced sole】--------------------------------------------------833.6 设计侧墙【Draw on Side】-----------------------------------------------------843.7 底花【Tread】------------------------------------------------------------------------873.8 工具【Tools】-------------------------------------------------------------------------893.9 检视【View】-----------------------------------------------------------------------903.10 帮助【Help】----------------------------------------------------------------------------90底部设计范例-----------------------------------------------------------------------------91Delcam Crispin ShoeDesign基本操作教学提示：Delcam Crispin ShoeDesign直接在鞋楦上进行 3D 鞋款设计，生成广告质感的设计效果图。

苏格兰议会大厦

-*()5*/($0/46-5"/540DFGPS7JTVBM*OUFSBDUJPO07*
#6*-%*/($0/530-"%7*4034$BJSOT1SPQFSUZ4FSWJDFT
1-"//*/(461&37*40345VSOFS5PXOTFOE.BOBHFNFOU4ZTUFNT
"$0645*$$0/46-5"/544BOEZ#SPXO"TTPDJBUFT

"%7*40340/)"3-*/(41&$*'*$"5*0/4'0326&&/4#&33:)064&4DPUUJTI-JNF$FOUSF
4*(/"(&$0/46-5"/54$%5
米拉莱斯手稿 Miralles Sketches
俯瞰图 Aerial View
80
Copyright©博看网. All Rights Reserved.
[ TOPIC ] 主题／Miralles Tagliabue EMBT
꣣♳⛓莽
#0"540/-"/%
苏格兰是一片美丽的国土……而非一系列城市的简单堆砌议会大厦应当能够彰显其所象征的土地
$0/46-5"/54
$0/4536$5*0/."/"(&3#07*4-FOE-FBTF
26"/5*5:4637&:034%BWJT-BOHEPO&WFSFTU
4536$563"-&/(*/&&340WF"SVQ1BSUOFST
%&4*(/&340'16#-*$&9)*#*5*0/(SBWFO*NBHFT

slideshow在c语言中的用法

slideshow在c语言中的用法【Slideshow在C语言中的用法】一、什么是Slideshow？Slideshow是一种将多个幻灯片显示在屏幕上的技术，通常用于演示、展示信息以及交互式教学中。

在C语言中，我们可以利用各种库函数和技巧来实现Slideshow的功能，以便更好地展示和呈现我们的信息。

二、使用C语言创建Slideshow的基本思路1. 选择合适的C语言库C语言本身并不直接支持图形界面和Slideshow功能，所以我们需要选择适当的库来辅助实现。

常见的选择包括SDL、OpenGL和ncurses等。

这些库提供了强大的图形和界面相关函数，使得我们能够创建交互式的Slideshow。

2. 设计幻灯片的数据结构在C语言中，我们可以使用结构体来定义幻灯片的数据结构。

每个幻灯片通常包括标题、内容和图像等元素。

我们可以通过定义一个结构体数组来管理所有的幻灯片信息。

3. 实现幻灯片的切换与展示通过调用库函数，我们可以实现幻灯片的切换和展示。

一种常见的做法是使用循环来遍历所有的幻灯片，以控制展示的顺序和频率。

利用库函数提供的画图、显示文字等功能，我们可以将幻灯片内容展示在屏幕上。

三、利用SDL库创建Slideshow的示例代码下面是一个使用SDL库创建Slideshow的简单示例代码：#include <SDL2/SDL.h>#include <SDL2/SDL_image.h>#define SCREEN_WIDTH 800#define SCREEN_HEIGHT 600typedef struct {char* title;char* content;SDL_Texture* image;} Slide;int main() {SDL_Init(SDL_INIT_VIDEO);SDL_Window* window = SDL_CreateWindow("Slideshow",SDL_WINDOWPOS_UNDEFINED, SDL_WINDOWPOS_UNDEFINED, SCREEN_WIDTH, SCREEN_HEIGHT, SDL_WINDOW_SHOWN);SDL_Renderer* renderer = SDL_CreateRenderer(window, -1, 0);SDL_Surface* surface = IMG_Load("slide1.png");SDL_Texture* texture =SDL_CreateTextureFromSurface(renderer, surface);SDL_FreeSurface(surface);SDL_Rect destRect = {0, 0, SCREEN_WIDTH, SCREEN_HEIGHT};Slide slides[] = {{"Slide 1", "Content 1", texture}, {"Slide 2", "Content 2", NULL}, {"Slide 3", "Content 3", NULL}};int currentSlide = 0;SDL_Event event;int quit = 0;while (!quit) {SDL_PollEvent(&event);switch (event.type) {case SDL_QUIT:quit = 1;break;case SDL_KEYDOWN:if (event.key.keysym.sym == SDLK_RIGHT) {currentSlide = (currentSlide + 1) % 3;} else if (event.key.keysym.sym == SDLK_LEFT) {currentSlide = (currentSlide + 2) % 3;}break;}SDL_RenderCopy(renderer, slides[currentSlide].image, NULL, &destRect);SDL_RenderPresent(renderer);}SDL_DestroyTexture(texture);SDL_DestroyRenderer(renderer);SDL_DestroyWindow(window);SDL_Quit();return 0;}以上代码利用SDL库实现了一个简单的Slideshow，包括创建窗口、渲染器和图片纹理，以及处理键盘事件等功能。

WEDO-...-6... 方向控制阀门说明书

4/3 and 4/2 Directional Spool Valves, ISO Size 03Q max = 80 l/min, p max = 350 bar Direct acting, solenoid operatedSeries WEDO…1/7Reference: 400-P-181110-EN-01Issue: 08.2021S For controlling the starting, stopping,and direction of a flowS Manifold-mounting design, interface to ISO 4401-03-02S Operated by DC or AC solenoidsS Very reliable functions and extremely stable S With manual overrideS Solenoid coils can be changed quickly and easily without leakage from hydraulics system.1DescriptionThe WEDO-…-6… series of directional spool valves are solenoid operated, direct acting, manifold-mounting valves with a size 03 interface to ISO 4401-03-02. The main components of the valves are a steel body, either one or two solenoids, the control spool, and either one or two return springs. In the non-operated state, the return springs hold the control spool in the middle position or initial position. The control spool is operated by the DC or AC solenoids, whichare of the oil-immersed type. The integral manual override can be used to move the spool without energising the coil,for example during a power failure. These 4/3 and 4/2 directional valves are used in plant and machines to control the direction of a flow, and to stop the flow. The slip-on coils can be replaced without opening the hydraulic envelope and can be positioned at any angle through 4x90°. The version WEDO-42-C-6... is fitted with a mechanical detent setting.2Technical dataGeneral characteristics Description, value, unitDesignation 4/3 and 4/2 directional spool valvesDesignflange design, direct acting, electrically operated Mounting method 4 mounting holes for M5x30 mounting bolts(valve mounting bolts supplied with the valve)Tightening torque 5.2 Nm ± 10 %Size size 03 interface to ISO 4401-03-02Weight- valve with one solenoid - valve with two solenoids1.60 kg2.10 kgMounting attitudehorizontal recommended(vertical mounting makes air bleeding difficult)Ambient temperature range-20 °C … +80 °C400-P-181110-EN-01/08.2021Series WEDO…2/7Hydraulic characteristics Description, value, unit Maximum operating pressure - ports A, B, P - port T350 bar 210 bar Maximum flow rate DC AC80 l/min 60 l/minFlow direction see table “Symbols / Spool types”Hydraulic fluidHL and HLP mineral oil to DIN 51 524;HEES biodegradable fluids;for other fluids, please consult BUCHER Hydraulic fluid temperature range -20 °C … +80 °CViscosity range10…500 mm 2/s (cSt), recommended 15...250 mm 2/s (cSt)Minimum fluid cleanlinessCleanliness class to ISO 4406 : 1999class 20/18/15Electrical characteristics Description, value, unitStandard - Supply voltage 12 V DC, 24 V DC / 110 V AC, 220 V AC (50 … 60 Hz)Supply voltage tolerance ± 10 %Ambient temperature range -20 °C … +50 °C Nominal power consumption DC AC 30/31 W energising 225 VA (RMS) / holding39 VA (RMS)Switching time bei 40 l/min, 175 barDC AC45 ms (energising)28 ms (deenergising)15 ms (energising)23 ms(deenergising)Depending on pressure, flow rate, pressure drop and viscosity as well as dwell time under pressure, the switching times may vary from the the stated values.Relative duty cycle100 %Protection class to ISO 20 653 / EN 60 529IP65(with appropriate mating connector and proper fitting and sealing)Electrical connectionDIN EN 175301-803, 3-pin 2 P+E (standard)for other connectors, see “Ordering code”400-P-181110-EN-01/08.2021 Series WEDO…3/73Symbols / Spool types400-P-181110-EN-01/08.2021Series WEDO…4/74Performance graphsmeasured with oil viscosity 33 mm 2/s (cSt), coil at steady-state temperature and 10 % undervoltage Δp = f (Q) Pressure drop - Flow rate characteristicA, B, C, D, F, G, H and J spool0Q [l/min]60504030201024681012p [bar]P0434.ai43215678Spool type Flow directionP % A P % B P % T A % T B % T A % B B % A A / B / C 66–55––AN / BN / CN55–22––D 55–22––F 6* 46** 4–337 + +7 + +G 66–3* 13+ 1––H 44 4 +22––J66844––*in mid–position, B closed **in mid–position, A closed +in mid–position, A + B closed ++in mid–position, P closed400-P-181110-EN-01/08.2021Series WEDO…5/7p = f (Q) Performance limits with AC-solenoid coil operating at 50 Hz0Q [l/min]60504030201050100150200250350p [bar]P0435.ai4321300Spool typeFlow directionA 2B 2C 2D 1F 1G 4H 1J3p = f (Q) Performance limits - wIth DC-solenoid coil0Q [l/min]80705040301050100150200300350p [bar]P0436.ai542120603235250Spool typeFlow directionA 3B 3C 3D 1F 2G 5H 2J4IMPORTANT!The indicated performance limits apply when symmetrical flows pass through the valve.For non-symmetrical flows, the max. flows are substantially reduced, in worst cases to 33%.400-P-181110-EN-01/08.2021Series WEDO…6/75Dimensions & sectional view4/3 spool valve (spring centred)4/2 spool valve (pulse signal, detented)1)4/2 spool valve (1-solenoid model, A or B side)± 5%M A Seal kit NBR no. DS-150-V 3)Item Qty. 5)Qty. 6)Description 144O-ring no. 012∅ 9,25 x 1,78N90212O-ring no. 022∅25,12 x 1,78N90312O-ringno. 213∅23,39 x 3,53N90IMPORTANT!1)With manual override 2)Valve mounting bolts M5x30(included in the delivery)3)Seal kit with FKM (Viton) seals no. DS-150-V 4)Required surface finish on the mounting face (valve pad)5)4/2 valves (1 solenoid)6)4/3 valves (2 solenoid)400-P-181110-EN-01/08.2021Series WEDO…7/76Installation informationATTENTION!Only qualified personnel with mechanical skills may carry out any maintenance work. Generally,the only work that should ever be undertaken is to check, and possibly replace, the seals. When changing seals, oil or grease the new seals thoroughly before fitting them.IMPORTANT!When fitting the valves, use the specified tightening torque for the mounting bolts. No adjustments are necessary, since the cartridges are set in the factory.7Ordering codeWEDO =42=43=… =6=V =1 ... 9=... =D =A=(blank)=M100=8Related data sheetsReference (Old no.)Description400-P-030101(i-30)Size 03 interface to ISO 4401-03-02E 2021 by Bucher Hydraulics AG Frutigen, CH-3714 Frutigen****************************All rights reserved.Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. The information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue.Classification: 430.300.-.315.305.300。

第8章创成式外形设计

出填充曲面定义对话框；（3）选择刚才创建的曲线；（4）其它选项为默认值，单击【确定】按钮，填充曲面创
建完成。
1-16
8.3.5 创建多截面扫掠曲面
【多截面曲面】工具，是通过几个已知的截面曲线扫描曲面的工具。
下面以如图所示图形创建多截面扫描曲面为例，讲解【多截面曲面】工具的使用方法，具体操作步骤如下所示：
1-10
8.2.7 创建曲线
曲线工具栏是用来创建曲线的工具。单击【线框】工具栏上的【样条线】工具按钮黑色三角，展开曲线工具栏，该工具栏包含样条线、螺旋线、螺线、脊线和等参数曲线五个曲线创建工具。
1．创建样条线（Spline） 2．创建螺旋线（Helix） 3．创建螺线（Spiral） 4．创建脊线（Spine） 5．创建等参数曲线（Isoparametric Curve）
1．轴线 2．折线
1-6
8.2.3 投影（Projection）
【线框】工具栏上的【投影】工具是根据曲线投影或连接来创建曲线，单击【投影】工具右下黑色三角，展开【投影-混合】工具栏，如图所示，该工具栏包含投影、混合、反射线三个工具。
1．投影（Projection） 2．混合（Combine） 3．反射线（Reflect line）
差。
1-18
8.3.7 创建高级曲面
高级曲面是对曲面进行变形生成新的曲面。本小节将通过实例来讲解高级曲面的使用方法。
1．创建突起曲面 2．使用包裹曲线变形曲面 3．使用包裹曲面变形曲面 4．改变曲面形状
1-19
8.4 编辑曲面
前面讲解了创成式外形设计方法。但一个做好的曲面不是孤立的，往往会与其几何元素发生关系，而且曲面本身也需要不断地修改以满足下一步造型的需要，这就需要对曲面进行编辑。本节将介绍几种常见的曲面编辑方法：合并、拆分、剪切、复制以及倒角等。

经典精致时尚阴影静态汇报ppt模板

在这里输入标题
输入标题
在这里输入内容……在这里输入内容……
输入标题
在这里输入内容……在这里输入内容……
输入标题
输入标题
在这里输入内容……在这里输入内容……
输入标题
在这里输入内容……在这里输入内容……
在这里输入标题
在这里输入补充内容
在这里输入标题
输入标题
• 在这里输入内容…… • ……
输入标题
• 在这里输入内容…… • ……
输入标题
在这里输入内容…… 在这里输入内容……
输入标题
在这里输入内容…… 在这里输入内容……
输入标题
在这里输入内容…… 在这里输入内容……
在这里输入标题
4
输入标题
在这里输入内容…… 在这里输入内容……
3
1 输入标题
在这里输入内容…… 在这里输入内容……
2
输入标题
在这里输入内容…… 在这里输入内容……
输入标题
在这里输入内容……在这里输入内容……在这里输入内容 ……
输入标题
在这里输入内容……在这里输入内容……在这里输入内容 ……
在这里输入标题
输入标题
在这里输入内容……在这里输入内容……
01
02
输入标题
在这里输入内容……在这里输入内容……
输入标题
在这里输入内容……在这里输入内容……
04
03
输入标题
在这里输入标题
输入标题
在这里输入内容在这里输入内容在这里输入内容在这里输入内容在这里输入内容
输入标题
在这里输入内容
在这里输入内容
在这里输入内容在这里输入内容在这里输入内容在这里输入内容在这里输入内容

基于SE技术的SlideShow图片浏览器的设计与实现

The Design and Implementation of Bitmap Browser withSlideShow Based on SEBangsheng Zong , Tiecheng Song , Lianfeng ShenNational Mobile Communications Research Laboratory,Southeast University, Nanjing 210096email zongbs1986@ songtc@ lfshen@Abstract: This paper uses the technology of SE (Silverlight for Embedded) to exploit bitmap browser with SlideShow in MID (Mobile Internet Device) based on Windows CE, emphases on the key technologies and exploiting flow of bitmap browser with SildeShow in embedded environment, and shows the strong advan-tage of Silverlight in the area of human-computer interaction.Keywords: Silverlight; embedded; bitmap browser; SlideShow基于SE技术的SlideShow图片浏览器的设计与实现纵邦胜，宋铁成，沈连丰东南大学移动通信国家重点实验室，南京 210096email zongbs1986@ songtc@ lfshen@摘要: 本文利用SE（Silverlight for Embedded）技术，在基于Windows CE的MID（Mobile Internet Device）中开发SlideShow图片浏览器应用程序，重点阐述了嵌入式环境下SlideShow图片浏览器的关键技术和开发流程，展现了Silverlight技术在人机交互开发领域的强大优势。

WILCOM威尔克姆9

WILCOM威尔克姆9.0绣花制版教程目录第一章ES软件的基本一如何启动软件二如何打开已有的文件、创建一个新的花样设计、保存文件（EMB格式）三如何放大缩小和用图形缩放框来改变花样对象的大小四如何输入要制作的美工图五如何在屏幕上测量距离六如何查看演示效果、针迹、轮廓线、绣点、功能、网格等第二章图形的基本制作方法一如何使用平针和三次绣来制作图形二如何使用输入方法A来制作花形三如何使用输入方法B来制作花形四如何使用输入方法C来制作花五如何使用复合填针来制作图第三章图形的专们制作方一文字的创建和修改二圆形或椭圆形的创建三星形的创建四环形的创建五主题花纹平针和主题花纹填针的运用第四章针迹的种类与刺绣质量一基本的针迹种类及效果二艺术性针迹的种类及效果三改进刺绣质量第五章指针编辑与接版一运行工具的使用二针迹编辑工具的运用三接版方法第六章金片盘带毛巾绣的制作一金片绣的制作二盘带绣的制作三毛巾绣的制作第七章绣花机的格式及其功能一机头的距离二绣花对象到机器上的保存第一章威尔克姆9.0软件的基本操作电脑绣花制版教程—--Wilcom（威尔克姆教程）电脑绣花软件有威尔克姆、田岛、富怡等花样设计制作软件,下面讲解的是ES—65威尔克姆9。

0（Wilcom)花样设计软件。

ES绣花软件是一套为绣花人员提供快捷灵活的专业绣花软件，此软件的设计可以满足绣花人员高质量和高效率的要求，还可以随时修改花样设计，或为不同织物采用已有的花样设计和在不同的绣花机上进行刺绣。

第一章威尔克姆9.0软件的基本操作一如何启动软件二如何打开已有的文件、创建一个新的花样设计、保存文件（EMB格式）三如何放大缩小和用图形缩放框来改变花样对象的大小“查看”菜单中有放大或缩小，快捷键Z或Sift+Z要放大选定的部分时，选择“图形缩放框"，或按住快捷键B，在要放大的针迹周围拖出一个方框即可。

显示全部的花样按快捷键0真实尺寸按快捷键1按一定比例显示时，选择缩放系数或按快捷键F,在对话框中输入要查看的比例，确定就可以.四如何输入要制作的美工图“图象"菜单中插入图形文件，选中打开的图形即可。

Volvo FH13 8x4 拖车空车尺寸规格说明书

Important NotesChassis DimensionsCab Height: +69 mm for CAB-XHSL.D-measure includes a front clearance of 50 mm and for rigid trucks also a subframe of 100 mm.Height can vary ± 20 mm for leaf and ± 10 mm for air suspension. All dimensions are for unladen chassis and any tag axles down.Weight and dimensions are based upon the following tyres:Chassis weight includes oil, water, AdBlue, 0 litres fuel and without driver. Kerb weight can vary ± 3%.Turning diameters are theoretically calculated.Legal weights can differ from country to country.For more detailed weight information, including optional equipment weights, ask your Volvo sales contact to enter your specification into the Volvo Weight Front Axle Tyres: 295/80R22.5 Drive Axle Tyres: 295/80R22.5Chassis Dimensions [mm]WB Wheelbase4300A Overall Chassis Length9326 DCenter of rear axle to back of cab3168T Theoretical Wheelbase 4088Chassis Weights [kg]Front Axles 7255 Rear Bogie 3135 Kerb Weight 10390Turning Diameter [mm]Turning Circle Diameter Kerb to Kerb 18100Turning Circle Diameter Wall to Wall 19500Plated Weights [kg]PlatedDesignGross Vehicle Weight27500 34000 Gross Combination Weight 42500 70000 Front Axles 11000 13000 Rear Bogie 16500 21000■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).■ RADD-GR Rear air suspension■ FH-SLP5 Sleeper Cab□ FH-XHSL5 Globetrotter XL cab■ EU5SCR-M Eu5 SCR Selective Catalytic Reduction ( mandatory )■ D13C500 Engine, 13C litre, 500hp, 2500nm □ D13C540 Engine, 13C litre, 540hp, 2600nm■ EBR-VEB+ Volvo Engine Brake + (VEB+)■ AT2612 Volvo I-shift-12 speed automatic transmission (2600nm)□ ASO-C Crawler gears□ ASO-ULC Ultra low crawler gears■ RVC1 Australian Road Friendly Certification□ RTH2610BVolvo RTH2610B hub reduction rear axles 4 planet gears per hubAxle rating: 26,000 kg 115 tonne train weight (Application approved)□ RTS2310ASingle reduction tandem 23t GCW100t ■ RTS2370B Single reduction tandem 23t GCW70tPackages ■INFODF Information Platform with Dynafleet Support □ INFOMED Information Platform-Medium□ INFONDF Information Platform with Navigation & Dynafleet SupportChassis ■ FST-PAR3 3 leaf parabolic front springs (stiffer than normal)■ FAL13.0 Front axle rating: 13,000 kg■ FSTAB Front stabilizer, normal stiffness□ FSTAB2 Front stabiliser bar increased stiffness■ RAL21 Rear suspension load rating: 21,000 kg■ RSTAB3 Heavy duty rear stabiliser bar□ PSP-VAR2 Power steering pump with electronic control variable displacement■ EBS-MEDElectronic Brake System (EBS) contains ABS, Traction control, Hill start aid Diff lock control, Brake assistWheel brake monitoring, EBS status■ FST8080 Frame section thickness 8mm■ FIL-TXEB Liner (inner) - trans x-mem to end of bogie■ BBOX-AC Across frame battery box■ 2BATT225 2x225 Ah batteries□ BATTAMP Battery amperage indicator (in the DID)■ MSWI-C Isolation toggle switch LHS of chassis□ MSWI-R Isolation switch on key fob (press door lock twice to isolate)■ R460A71S RHS 460 litre alloy fuel tank with steps Min volume 460l Max volume 460l■ L460A71S LHS 460 litre alloy fuel tank with steps Min volume 460l Max volume 460l□ ADB150 AdBlue tank 150 litres (underbelly) ■ ADB190 AdBlue tank 190 litres (underbelly)■ FCAP-L Fuel tank cap with lock■ ESH3VERT Raised Horizontal Muff/Vertical outlet■ EXST-SSP Stainless steel exhaust stack■ TBC-AUS Trailer brake connections (suzi coils)■ TRBR-HCRHand controlled trailer brake, reduced pressure□ TRB-STRE Automatic trailer brake activation (stretch brake)■ TL-LED LED tail lightsRims and Tyres □ RT-AL 10 stud alloy disc rims (with long wheel studs) □ RT-ALDP 10 stud dura-bright alloy disc rims (with long wheel studs) □ RT-ALDPD 10 stud dura-bright alloy disc rims (with short wheel studs) □ RT-ALDU 10 stud alloy disc rims (with short wheel studs) □ RT-ALP 10 stud polished alloy disc rims (with long wheel studs) □ RT-ALPDU 10 stud polished alloy disc rims (with short wheel studs) ■ RT-STEEL 10 stud steel disc rims □ SPWT-D Spare rim & tyre equal to drive □ SPWT-F Spare rim & tyre equal to steer □ SWCP-T2 Transport mounted spare wheel ■ JACK-12T 12 tonne capacity jack with brace■ TOOL-BAS Basic tools □ TOOLKIT Tool kit complete□ INFLAHOS Tyre inflation hose (18 metres)Powertrain equipment ■ DRM-BE Drive Mode - Balanced Economy □ DRM-E Drive Mode - Economy □ PVT-MAP Preview Topography Information (by a high resolutioncommercial topography map)■ CRUIS-E Extended cruise control (additional fuel saving functions) □ CRUIS-E5 Cruise Control (I-Torque)□ AMSO-AUT Manual gear shift in automatic mode. □ AVO-ENH AMT Vocational option - enhanced □ APF-ENH Enhanced I-shift PTO functions■ TC-MAOH2 High performance transmission cooler■ 2COM1080 High volume air compressor□ 2COM1100 Air compressor. 1100 litres/minute (Eu6) ■ AIRIN-HI High air intake, roofline position ■ ACL1ST-S Air cleaner with two stage filter element □ 24A150BL Alternator - 150 Amp (Eu6) □ 24A180BL Alternator - 180 Amp (Eu6) ■ 24AL150B Alternator - 150 Amp□ FUEFE2LW Dual fuel filter, engine mounted with water separator-large □ PTER-DIN Power Take Off / splined shaft groove (female) DIN5462. □ PTER1400 Rear engine mounted power-take-off with flange SAE 1410 □ HPE-F101 F1-101 Hydraulic pump rear engine mounted □ HPE-F41 F1-41 Hydraulic pump rear engine mounted □ HPE-F51 F1-51 Hydraulic pump rear engine mounted □ HPE-F61 F1-61 Hydraulic pump rear engine mounted □ HPE-F81 F1-81 Hydraulic pump rear engine mounted □ HPE-T53 F2-53/53 twin flow hyd pump rear engine mounted □ HPE-T70 F2-70/53 twin flow hyd pump rear engine mounted □ HPE-V45 V1-45 variable pump rear engine mounted □ HPE-V75 V1-75 variable pump rear engine mounted □ PTRD-D PTO with 2 DIN connections rear + 1 DIN connection front □ HPG-F41 F1-41 hydraulic pump gearbox mounted □ HPG-F61 F1-61 hydraulic pump gearbox mounted □ STWM-LE Steering wheel material - leather □ DRC-AMII DPF regeneration- auto initialise/manual on demand/manualinhibit□ DRC-AUTO DPF regeneration- fully automatic (in motion) □ ACCLF-D Acceleration Limiting Feature - Disabled □ ACCLF-E Acceleration Limiting Feature - Enabled■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS). Rigids with standard COG)□ ESP-BAS2 ESP package (tractor/trailer combinations without ABS)■ HWSS-ACB ACC & forward collision warning & emergency braking.■ LSS-DW With lane departure system■ LCS2 Lane Change Support with Side Collision Avoidance (LHS)■ DAS-W Driver alert support warning□ RSENS-W Rain sensor to activate wipers■ CU-ECC Climate controlled air conditioning□ IMMOBIL Engine immobiliser□ ALARM-B Anti-theft alarm (cab)■ ISUNS-DS Interior side sunvisor - driver's door□ ISUNF-RE Interior sunvisor - front (electric) ■ ISUNF-RM Interior sunvisor - front (manual)■ CSPL-BXD Centre section dash panel pull out drawer□ ADFS 2 din slots in front shelf■ BUPALARM Reverse alarm□ LOADIND Load indicator, electronic controlled suspension (SUSPL-EC)□ REMC-MF Multifunction wireless remote control■ FIREX25A Fire extinguisher 2.5 kg■ WRITEPAD Storable steering wheel fit clip board■ DST-CF5 Fully adjustable driver's comfort seatAir suspension, heated, integrated safety belt□ SBD-RED Red safety belts, pass. & driver seats■ SBPRE-DS Drivers seat belt pretensioner■ PST-BAS1 Basic passenger's seat□ PST-CF5 Fully adjustable passenger comfort seat Air suspension, heated, safety belt□ SBPRE-PS Passenger seatbelt pretensioner□ ARMRE-BB Armrests both sides - driver's & passenger's seat ■ ARMRE-DB Armrests both sides - driver's seat■ ARU-LEA Seat armrest upholstery - leather■ GRABHI-B Instep grab handle - standard□ GRABHI-L Instep grab handle - leather bound■ FMAT-RUB Floor mats - rubber■ LBK80F Lower bunk 815mm wide□ LBK80FRE Lower bunk 815mm wide, electrically reclinable □ LBK80FRM Lower bunk 815mm wide, manually reclinable■ MATL-FI Spring Mattress Lower Bunk - Firm (100kg +) □ MATL-SF Mattress lower bunk - semi firm□ OLMAT-BA Mattress overlay - basic□ TBK70AD Top bunk 700mm wide, foldable & height adjustable □ TBK70F Top bunk 700mm wide, foldable□ SLCP-BAS Standard sleeper control panel□ SAFE Safe box at bed-end□ RUS-BAS Rear upper cab storage - 154 litres for Sleeper/Globetrotter & 60 litres for Day Cab□ RUS-HIG Rear upper cab storage - 245 litres□ TABLE Table□ REFR-RUS 28 litre refrigerator in upper rear storage □ REFRIG 33 litre refrigerator under lower bunk□ MICRO-PK Prep kit for microwave■ BOTH-D Bottle holder in driving area□ BOTH-DLBottle holder in driving & resting areas■ SOL12S 12v outlet in sleeper area■ INLI-BAS Interior night lights□ INLI-NL Interior white and red (night) light□ INLI-NLD Interior light including night light and dimmer function□ ARL-FLEX Flexible reading lamp (snake light)■ RH-ER Roof hatch-electric (metal emergency exit)□ RH-ETR Roof hatch-electric (tinted glass & rear opening)□ VANMIR Vanity mirror□ AS-FUS Auxiliary shelf, front upper storage□ INFOT-PK LCD screen mount - 6kgs maxCab exterior ■ EXTL-BAS Standard exterior trim level □ EXTL-EN2 Enhanced exterior trim level 2 □ EXTL-ENH Enhanced exterior trim level. ■ DGLAS-H Hardened door glass □ DGLAS-L Laminated door glass■ LOCK-REM Central door locking with remote control ■ BUMP-B Bumper - plastic □ BUMP-B2 Bumper - steel □ BUMP-SP Bumper spoiler ■ BUGNET Insect net in front of radiator ■ CTILTP-E Electrical cab tilt pump □ FCABS-A Front cab suspension-air bellows ■ FCABS-M Front cab suspension-mechanical spring □ RCABS-A Rear cab suspension-air bellows ■ RCABS-M Rear cab suspension-mechanical spring ■ MIRFLA3 Electrically operated flat mirrorsWide angle and close view mirror both sides□ MIRFLACP Electrically heated & operated flat glass mirrors with frontmonitoring camera on passenger side.□ SUNV-H Exterior sunvisor □ AD-ROOF Aero-dynamic roof mounted deflector □ AD-SIDEL Aero-dynamic cab side deflectors□ GUARD-W Windscreen stoneguard ■ HL-LED LED headlights □ HL-LED3 LED headlights with glare free high beam■ HL-CLEAN Head lamp cleaning system ■ DRL-LED V-shaped LED daytime running light ■ DRIVL2 Integrated driving lamps □ UDRIVL Without driving lights ■ FOGL-WC Integrated fog lamps □ CL-STAT Corner light-static □ ASL-RF2 Auxiliary spotlights inside Globetrotter sign box ■ IDLAMP-A Identification lamps-amber□ BEACON-P Beacon light wire preparation ■ SPOTP-F Aux spotlamp preparation, 280W maximum □ ROS-ILP Illuminated Cab Sign Prep Kit□ CSGN-GTR Globetrotter decal■ HORN-F1S Single electric Jericho air horn (behind grill) □ HORN-R2S Chromed air horns, two roof mounted □ ANT-CBR Antenna for CB radio, single antenna □ STUC-B Storage compartments under cab-both sides■ 5WM-OBLP 5th wheel L-profiles□ SRWL-PK Wiring prep for chassis mounted reverse/working lamps-3position switch□ SWL-PK Wiring prep for chassis-mounted working lamps-2 positionswitch□ WL-TA1W Fifth wheel light□ WLC-H2W 2 x H3/70W high mounted work lamps with white lens.□ WLC-PKH Prep kit for high mounted work lamps.□ WLC-PKL Prep kit for low mounted work lamps.□ WLC-PKLH Prep kit for low and high mounted work lamps.□ ECBB-HIG Body builder module - cab module■ ECBB-MED Body builder module - cab module■ BBCHAS1 Body builder chassis electrical interface, 1 x 7 pin connector□ BBCHAS3 Body builder chassis electrical interface, 3 x 7 pin connectors■ AESW2PK 2 flexible switches (AUX1 & AUX2) + additional 4 flexibleswitches■ AUXSW-4 Wiring prep. for 4 extra bodybuilder switches (switches notincluded)Delivery services■ TGW-4GWL Telematics Gateway with 4G/LTE & WLAN□ FMS-PK Fleet management system gateway□ DRUT2 "My Truck" smartphone app. 2 year prepaid■ Standard Equipment □ Optional EquipmentFor more detailed information about cab and powertrain equipment, please refer to separate specification sheets.For all possible options and combinations of options please consult your Volvo sales contact who can create a specification to match your requirements using the Volvo Sales Support system (VSS).。

SITP9结题报告“梦影”展示板(软件)

项目类型理工类同济大学大学生创新实践训练计划结题报告及评审表课题名称“梦影”展示板（软件）课题负责人韩业恺学号1253157所在院（系）机械与能源工程学院指导老师朱玉田教授报告时间2015 年 5 月26 日同济大学大学生科技服务中心二〇一五年五月制项目感想：历时一年零五个月,我们将“梦影”展示板（软件）由一个想法变成现实,这是我们在大学时期第一次实践,也是最宝贵的一次,在过程中,机械与能源工程学院的朱玉田教授真的对我们的项目给予了巨大的支持和帮助，我们也第一次受到如此渊博和和蔼的教授的指导，感觉在学术的路上是非常难忘的一段时光。

在做“梦影”展示板（软件）的这一年多的时间中，作为组长，我认为我做的比较好的地方是充分发挥了每个组员的优势，没有将我们的思路局限住，虽然前期用了很长的时间来设计方案，包括软件的UI设计、电路库设计、能实现哪些功能、怎样使用Arduino接口等。

但是在每一次的讨论后我们都有一些新的想法，新的创新点，可能有一些并不能实现，但是至少为我们提供了更多的可能。

在进行多个方案的对比之后，最终确定了我们现在的这套设计方案。

我们在软件发展的路上还有很多困难需要克服，Labview和Arduino是两个非常强大而且开源的系统，怎样充分利用是我们未来最需要重视的。

在项目进行中我们遇到了许多未曾遇到的困难，我们的Labview和Multisim的接口不同于往常的文件读取而是采取了Labview2013版才新加入一个接口，在网上仅有一篇文章可供参考，一开始让我们非常困扰。

但是经过全组同学的努力，我们终于解决了接口问题。

之后，我们的Labview版面设计由于第一次接触NI系列软件，对于其中的操作不是很熟悉，我们不得不查询了大量的书籍和论文，经过数个夜晚的鏖战，终于将软件整体完成，得以参加“上海市机械工程创新大赛”。

比赛中，我们的创新出发点和创新性得到了在场评委和赛区督导教授的一直好评，但是由于比赛作品类型限制未能拿到名次。