MAAP-000076-PKG001中文资料
Grandstream Networks, Inc. GWN7600LR 企业级 802.11ac
Grandstream Networks,Inc. GWN7600LR企业级802.11ac Wave-2室外型长距离WiFi接入点用户手册图4:GWN7600LR水平安装保修如果您购买自经销商，请直接联系经销商更换，维修或退货。
如果您直接购于潮流网络公司，请联系潮流技术支持团队，取得退货许可号码（RMA）后退货。
潮流网络科技公司保留在不做预先通知的情况下修改售后服务细则的权利。
图12:GWN7600Web页面登录页面访问Web页面:1.将电脑连到GWN7600LR所在的局域网中。
2.确保设备已经上电。
3.打开Web浏览器，并用“发现GWN7600LR”章节中介绍的方式输入设备MAC地址或以下形式输入Web页面 面 https://IP_Address。
4.输入管理员的账号和密码登录WEB配置页面，默认的管理员账号和密码均为“admin”。
Web页面语言当前GWN7600LR系列Web页面支持英语和简体中文。
用户可以在登录之前或之后在WEB用户登录界面的右上角选择显示的语言。
图8:GWN7600LR Web页面语言（登录页面）概览页面概览页面是成功登录GWN7600LR的Web界面后显示的第一页。
概览页面提供了以仪表板样式显示的GWN7600LR信息的总体视图，便于监控。
图10:概览页面用户可以点击进入接入显示连接的客户端的总数，击进入客户页面了解更多选项。
AP的客户端的数目或者组合上用户可以点击进入AP的客户端的数目或者组合上行和下行的数据使用来分类列表。
用户可以点击进入网络组页面以获得显示热门客户列表，击进入客户页面了解更多选项。
用户可以单击以弹出警报图11:应用修改应用修改，或点击图16:应用成功图14：登录页面在恢复出厂时，默认选中“以主接入点登录”，在输入管理员的用户名和密码后点击“登录”。
--------------------------------------------------------------------------------------------------------------------------------------------警告:“以主接入点登录”选项将禁止GWN7600LR接入点与其他主GWN76xx配对，并且只能作为主接入点控制器工作。
Agile e6 Upgrade Tool 3.0 用户指南说明书
1
Agile e6.0
Chapter 2 Architecture and Basic Concepts
Architecture
The upgrade tool is implemented in Java. The tool accesses the databases directly using a JDBC connection. The configuration of all upgrade steps is stored in a set of xml control files. In addition SQL scripts are used for special steps. The log and error files are mainly in XML format. The user can execute the migration steps easily from the user interface of the Upgrade Tool.
莫萨公司OnCell 3120-LTE-1系列产品说明书
OnCell3120-LTE-1SeriesIndustrial LTE Cat.1cellular gatewaysFeatures and Benefits•Low power consumption(40mW in standby)•GuaranLink for reliable cellular connectivity•Dual cellular operator backup with dual-SIM•Cellular WAN and Ethernet WAN backup mechanism for a complete pathredundancy•Rugged hardware design well suited for hazardous locations(ATEX Zone2/IECEx)•VPN secure connection capability with IPsec,GRE,and OpenVPN protocolsCertificationsIntroductionThe OnCell3120-LTE-1Series is a set of reliable,secure,low power consumption LTE gateways with state-of-the-art global LTE Cat1coverage. These LTE cellular gateways provide reliable connections from remote serial and Ethernet devices to a cellular network so that your applications can be easily implemented for IIoT remote-access scenarios.With its efficient power saving features,the OnCell3120-LTE-1Series lowers power consumption to less than40mW when in standby mode which can be managed using schedules.To enhance industrial reliability,the OnCell3120-LTE-1features GuaranLink to ensure robust cellular connectivity.Remote Access Gateway with VPN and Network Security•Managed by centralized IP management software,OnCell Central Manager•Secure and reliable VPN support with NAT/OpenVPN/GRE/IPsec functionality•Cybersecurity features based on IEC62443-4-2Industrial-grade Reliability•Rugged hardware design well suited for hazardous locations(ATEX,C1D2,IECEx)•GuaranLink for reliable cellular connectivity•WAN backup between cellular and Ethernet•-30to70°C wide operating temperature•Low power consumption:Less than40mW in standby modeSpecificationsCellular InterfaceCellular Standards LTE CAT-1,HSPA,UMTS,EDGE,GPRS,GSMLTE Data Rate10MHz bandwidth:10.2Mbps DL,5.2Mbps ULHSPA Data Rates7.2Mbps DL,5.76Mbps ULBand Options(EU)LTE Band1(2100MHz)/LTE Band3(1800MHz)/LTE Band7(2600MHz)/LTE Band8(900MHz)/LTE Band20(800MHz)/LTE Band28A(700MHz)UMTS/HSPA900MHz/1800MHz/2100MHzGSM900MHz/1800MHzBand Options(AU)LTE Band3(1800MHz)/LTE Band5(850MHz)/LTE Band8(900MHz)/LTE Band28(700MHz)UMTS/HSPA2100MHz/850MHz/900MHzBand Options(US)LTE Band2(1900MHz)/LTE Band4(1700MHz(AWS))/LTE Band5(850MHz)/LTEBand12(700MHz)/LTE Band13(700MHz)/LTE Band14(700MHz)/LTE Band66(1700MHz)/LTE Band71(600MHz)UMTS/HSPA1900MHz/1700MHz/850MHzNo.of SIMs2SIM Format Nano SIMCellular Antenna Connectors2SMA femaleEthernet Interface10/100BaseT(X)Ports(RJ45connector)2USB InterfaceNo.of USB Ports1USB Connector USB Type AUSB Standards USB2.0Serial InterfaceNo.of Ports1Connector DB9maleSerial Standards RS-232/422/485Data Bits5,6,7,8Stop Bits1,1.5,2Parity None,Even,Odd,Space,MarkBaudrate75bps to921.6kbpsConsole Port RS-232(TxD,RxD,GND),4-pin header output(115200,n,8,1)Serial SignalsRS-232TxD,RxD,RTS,CTS,DTR,DSR,DCD,GNDRS-422Tx+,Tx-,Rx+,Rx-,GNDRS-485-2w Data+,Data-,GNDRS-485-4w Tx+,Tx-,Rx+,Rx-,GNDEthernet Software FeaturesManagement GuaranLink,DHCP server,DDNS,ARP,Telnet,TCP/IP,UDP,SMTP,Remote SMSControl,Power Saving,Syslog,SNMPv1/v2c/v3,Serial Console,Telnet Console,WebConsole,OnCell Central Manager,Wireless Search UtilityFirewall Filter:MAC,IP protocol,port-based,Access IP listSecurity HTTPSTime Management SNTP ClientIPsec VPNAuthentication PSK/X.509/RSAEncryption DES,3DES,AES,MD5,SHA-1,DH2,DH5Concurrent VPN Tunnels5NATFeatures NAT loopback,1-to-1,N-to-1,Port forwardingOpenVPNOpenVPN OpenVPN(client and server),Tunnel mode(routing)and TAP mode(bridge) Encryption Blowfish CBC,DES CBC,DES-EDE3CBC,AES-128/192/256CBC Concurrent VPN Tunnels5Power ParametersInput Current0.8A(max.)Input Voltage9to36VDCPower Consumption5W(typ.)Power Connector Terminal blockReverse Polarity Protection SupportedPower Button Reset buttonPhysical CharacteristicsHousing MetalIP Rating IP30Dimensions128.5x26x89.1mm(5.06x1.02x3.51in)Weight550g(1.22lb)Installation DIN-rail mounting,Wall mounting(with optional kit)Environmental LimitsOperating Temperature Standard Models:0to55°C(32to131°F)Wide Temp.Models:-30to70°C(-22to158°F)Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsEMC EN55032/35,EN61000-6-2/-6-4EMI CISPR22,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:4kV;Air:8kVIEC61000-4-3RS:80MHz to1GHz:10V/mIEC61000-4-4EFT:Power:1kV;Signal:1kVIEC61000-4-5Surge:Power:1kV;Signal:1kVIEC61000-4-6CS:10V;150kHz to80MHzIEC61000-4-8:30A/mFreefall IEC60068-2-32Hazardous Locations ATEX,IECEx,Class I Division2Radio Frequency PTCRB,FCC ID SLE-LE910CXNFRadio RCM,KCCarrier Approvals VerizonAT&TCellular Standards EN301511EN301908-1EN62311(MPE SAR)AS/CA S042EN301489-1/-52Safety IEC60950-1,IEC62368-1,UL60950-1,UL62368-1 Shock IEC60068-2-27Vibration IEC60068-2-6Green Product RoHS,CRoHS,WEEEMTBFTime585,775hrsStandards Telcordia SR332WarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x OnCell3120-LTE-1Series LTE cellular gateway1 Installation Kit1x DIN-rail kitDocumentation1x quick installation guide1x warranty cardDimensions1.An activated nano SIM card(not included)must be provided by a third party Cellular Service Provider.Ordering InformationOnCell3120-LTE-1-EU LTE Cat1B1(2100MHz)/B3(1800MHz)/B7(2600MHz)/B8(900MHz)/B20(800MHz)/B28A(700MHz)-0to55°C Wall,DIN railOnCell3120-LTE-1-EU-T LTE Cat1B1(2100MHz)/B3(1800MHz)/B7(2600MHz)/B8(900MHz)/B20(800MHz)/B28A(700MHz)-30to70°C Wall,DIN railOnCell3120-LTE-1-AU LTE Cat1B3(1800MHz)/B5(850MHz)/B8(900MHz)/B28(700MHz)-0to55°C Wall,DIN railOnCell3120-LTE-1-AU-T LTE Cat1B3(1800MHz)/B5(850MHz)/B8(900MHz)/B28(700MHz)-30to70°C Wall,DIN railOnCell3120-LTE-1-US LTE Cat1B2(1900MHz)/B4(1700MHz)/B5(850MHz)/B12(700MHz)/B13(700MHz)/B14(700MHz)/B66(1700MHz)/B71(600MHz)-0to55°C Wall,DIN railOnCell3120-LTE-1-US-T LTE Cat1B2(1900MHz)/B4(1700MHz)/B5(850MHz)/B12(700MHz)/B13(700MHz)/B14(700MHz)/B66(1700MHz)/B71(600MHz)-30to70°C Wall,DIN railAccessories(sold separately)AntennasANT-LTEUS-ASM-01GSM/GPRS/EDGE/UMTS/HSPA/LTE,omni-directional rubber duck antenna,1dBiANT-LTE-ASM-02GPRS/EDGE/UMTS/HSPA/LTE,omni-directional rubber duck antenna,2dBiANT-LTE-ANF-04GSM/GPRS/EDGE/UMTS/HSPA/LTE,omni-directional outdoor antenna,4dBi,IP66Wireless Antenna CablesCRF-SMA(M)/N(M)-300N-type(male)to SMA(male)CFD200cable,3mA-CRF-SMSF-R3-100Cellular magnetic base,SMA connector,1mMounting KitsWK-35-042plates(35x44x2.5mm)with6screws(FTSx6M3x4mm)©Moxa Inc.All rights reserved.Updated May04,2022.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。
PRONES V3 版权说明书
Prones supports whole factory operationsoSale Order oProduction Planning ( Master Plan Scheduling )oMaterial Requirement Calculation oPurchase Control (Order Entry, Order Document, Acceptance)oProduction Control (Order Entry, Order Document, Work Result)oInventory Control oShipment And optional system :oCost Control System (Actual Cost, SEIBAN Cost)oBOM Editor (Visual BOM Setup)oLot Control (Lot Trace Ability)o Digital Viewer (Integrates Image file, Document file and CAD Drawing with Item and BOM Informationfor production’s viewer)Applicable to any production model / systemPrones can be applied to any production system.o Anticipated: Producing common product base on production plan/ sale forecast.o Ordered: Producing a product for the customer requirement.o Optional Ordered: Producing a special product for the customer requirement by adding optionalspecifications.o Individual Ordered: Designing and manufacturing products completely based on the customerspecification.Prones can be applied to any production model.o Make to Order: Products are made after receipt a customer order to meet the special needs of the customer o Assemble to Order: The key parts are stocked in anticipation. Products are assembled after receipt ofcustomer order.o Make to Stock: Products are finished before receipt of a customer order. Customer orders are filled fromexisting stocks.Ordering Control based on the itemPrones allow you to control ordering system based on each item by 4 control method:o SEIBAN Controlo MRP Controlo Order Point Controlo Manual ControlSEIBAN StrategyBy assigning SEIBAN to all parts, materials, and purchase order associated with particular customer or products line, manufacturers can track information regarding any part of manufacturing process. It’s possible to track all costs and value-added activities associated with SEIBANMultiple Factories ControlPrones allow you to collectively manage any number of factories and branch offices, overcoming the barriers of distance within the organization.Prones separate activity (Sale, Production, Shipment) by each factory. But the activity results are controlled together by the head office and it is still possible to generate management data according to factory.Benefit for your organizationo Business standardizingo Work evaluation by factoryo Cost information by factoryo Business & communication efficiencyLot Trace AbilityPrones provides both Material Lot No. and Production Lot No. controls. Trace ability of Production Lot No. of shipment products and Material Lot No. of purchase items is made possible.Combination of Product MixPrones supports two types of BOM control. Formula control for Batch processing and Structure control for Assembly processing.Link with Data WarehousePrones’s data is stored in Oracle database. Data can be easily retrieved and it allows rapid reports generation. This capability provides efficient control over your business process as information is easily obtainable.Financial IntegrationPrones now talks with various type of proven financial application packages described in the image above. Thus sales & procurement information can be flown without duplicated entries nor manual paper slip transfer. Prones also provides production cost information so the financial application can accurately update posting ofinventory and WIP information, too.。
非编采集P2素材详解
Panasonic AND 新奥特P2与非编如何用非编采集P2卡内的素材？非编采集P2素材详解我台使用的新奥特喜玛拉雅A1000非线性编辑系统能很好地支持松下P2存储卡的使用，只需在非编工作站上加装一只P2驱动器。
台技术人员已经在所有非编工作站上加装了内置的P2驱动器，在主机的光驱位置上，打开非编主机前面板就可见。
■ 使用前提示· 新奥特A1000非编支持P2摄像机拍摄的各种标清和高清格式素材，所有素材都可以在时间线上直接进行编辑，无需转码。
· 采集P2素材需使用非编软件中的“导入P2素材”工具。
P2素材的采集是超实时的，速度在5倍速左右，所以用“导入”来表述更贴切，以下均改称采集P2素材为“导入P2素材”。
· 根据我台当前的应用需求和防病毒需要，目前我们只开放了非编的P2素材导入功能，也就是只能从P2卡中导入素材，而不能往P2卡中回写素材。
如确有回写需要，比如需用P2卡记录高清节目与上级台交流，可求助制作机房技术支持，请技术人员帮助实现。
· 请勿试图用非编“导入P2素材”工具以外的其他途径（如资源管理器）浏览P2卡。
也不要往P2卡内写入任何其它内容，非编工作站装有安全过滤软件，P2卡一旦接入非编，卡中的任何非P2素材将自动删除。
■ P2素材的导入导入P2素材分四步：第一步插入P2卡打开非编主机前面板可看到位于光驱下方的P2卡驱动器，此为型号AJ-PCD35五卡槽驱动器，可同时插5块P2卡。
可以把P2卡插入任一卡槽中，当然也可以同时插多块卡。
卡槽内插入P2卡后，该卡槽左侧的小绿灯会亮起。
注：每个卡槽的左侧均有一个指示灯，指示灯闪烁说明该卡在读写数据，此时请勿取出此卡，以免损坏卡内数据。
第二步打开“导入P2素材”工具点击非编软件工具菜单找到“导入P2素材”工具，双击打开，跳出一个“P2设备”窗口。
第三步连接P2卡点击“P2设备”窗口左上角处的“连接”按钮。
系统会检测P2驱动器的各卡槽，如驱动器内插有P2卡，且卡内有P2素材，则会在场景列表内显示出所有检测到的素材。
7700种类商业注册表说明指南说明书
ECR 7700 Cash RegisterUSER'S GUIDEMajor Features•14 departments and up to 400 Price Look-Up (PLU)settings;•8 clerk numbers to monitor the sales of individual employees;•Electronic journal with a maximum capacity of up to 3,000 transaction lines for storing all transaction data;signalling of EJ memory full and nearly full conditions;•10-digit operator and client Vacuum Fluorescent Displays (VFD);•Quantity entries using the decimal point;•Training mode facility with related password;•Stock counter for PLU items, that automatically decrements to keep track of the remaining number of items in stock;•Replaceable keycaps;•Receipt on/off, and duplicate receipt features;•Possibility of activating a Clerk Security System consisting of a three-digit security code;•Possibility of assigning a name to each Clerk for rapid identification;•Z management report mode password definition;•Customer sales receipt header personalization and receipt footer definition;•Special rounding capabilities for Swiss, Danish and Swedish currencies;•Customer receipt and management report printing in English, French, German, Spanish, Dutch, Portoguese,Danish or Swedish;•Department programming (positive and negative sales)• 4 foreign currency exchange rates with related currency descriptors;•Cash, check, charge and card tender media keys, with change tendered on all payments;• 4 different VAT rates;•Possibility of programming the cash register to print a range of VAT totals on the sales receipt;•Time display at the press of a key;•Battery back-up protection for the records and pro-gramming data.Cash Register ComponentsWith reference to figure 2:1.Customer Display 2.Operator Display 3.Control lock 4.Keypad5.Cash Drawer6.Cash Drawer Lock7.Item deposit drawer8.Power Cord9.Customer Receipt Output Window 10.Printer Compartment CoverRemovable Cash Drawer with LockWith reference to figure 4, the cash drawer has slots for banknotes and for coins.Open the drawer by pressingor by sliding the hiddenemergency button underneath the register.The cash drawer can be completely removed from the register by lifting up on the open drawer and pulling towards yourself.ContentsMajor Features1Cash Register Components1Removable Cash Drawer with Lock 1Keypad Functions2The Control Lock and Key2Operator and Customer Displays 3Error Conditions 3Error Codes3Clearing an Error3Cash Register Reset Operations 3Electronic Journal 4Quick Start5Quick Start Programming5Cash Register Programming and Features6Making Changes to Cash Register Programming6Caption Programming using theAlphanumeric Keypad and Character Table 6Receipt Header and Footer 7Department Names 8PLU Item Names8Percent Discount (-%) or Add On (+%)8Foreign Currency Exchange Rates 9Foreign Currency Descriptors9Rounding Option for Swiss, Danish and Swedish Currencies9Fraction Rounding for VAT Calculation 10Printing VAT Information on Customer Receipts10Calculator Mode 10Clerk System 11Clerk Names12Manager Password12Using the Cash Register in a Password Protected Mode 12Training Mode 12System Options13Consecutive Receipt Number 15Z1 Counter Setting 15Z2 Counter Setting 15Grand Total Setting 15Management Reports 15X and Z Reports 15PLU Sales Report 16Clerk Report16PLU Stock Report17Department Programming Report 17PLU Programming Report17Cash Register Programming Report 17Training Report18Electronic Journal Reports 18Sales Transactions19This is a “Table of Contents preview” for quality assuranceThe full manual can be found at /estore/catalog/ We also offer free downloads, a free keyboard layout designer, cable diagrams, free help andsupport. : the biggest supplier of cash register and scale manuals on the net。
MAX17630B EV Kit 评估板说明说明书
Evaluates: MAX176305V Output-Voltage ApplicationMAX17630BEVKIT# Evaluation KitGeneral DescriptionThe MAX17630BEVKIT# Evaluation Kit (EV kit) provides a proven design to evaluate the MAX17630B high-effi -ciency, synchronous step-down DC-DC converter. The EV kit provides 5V/1A at the output from a 6.5V to 36V input supply. The switching frequency of the EV kit is pre-set to 400kHz for optimum efficiency and component size. The EV kit features adjustable input undervoltage lock-out, adjustable soft-start, open-drain RESET signal, and external clock synchronization. The EV kit is optimized for thermal performance. For more details about the IC benefits and features, refer to MAX17630 IC data sheet.Features●Operates from a 6.5V to 36V Input Supply ●5V Output Voltage●Delivers Up to 1A Output Current ●400kHz Switching Frequency●Enable/UVLO Input, Resistor-Programmable UVLOThreshold ●Adjustable Soft-Start Time ●Open-Drain RESET Output●Overcurrent and Overtemperature Protection ●Proven PCB Layout ●Fully Assembled and Tested319-100372; Rev 0; 5/19Ordering Information appears at end of data sheet.Quick StartRecommended Equipment●MAX17630BEVKIT# Evaluation Kit ● 6.5V to 36V, 1A DC-input power supply ●Load capable of sinking 1A ●Digital voltmeter (DVM)Equipment Setup and Test ProcedureThe EV kit is fully assembled and tested. Follow the steps below to verify the board operation.Caution: Do not turn on power supply until all con-nections are completed.1) Set the power supply at a voltage between 6.5V and36V. Then, disable the power supply.2) Connect the positive terminal of the power supply tothe VIN PCB pad and the negative terminal to the nearest PGND PCB pad. Connect the positive ter-minal of the 1A load to the VOUT PCB pad and the negative terminal to the nearest PGND PCB pad.3) Connect the DVM across the VOUT PCB pad andthe nearest PGND PCB pad.4) Verify that shunts are installed across pins 1-2 onjumper JU1 (see Table 1 for details) and pins 2-3 on jumper JU2 (see Table 2 for details)5) Turn on the DC power supply.6) Enable the load.7) Verify that the DVM displays 5V.Click here for production status of specific part numbers.5V Output-Voltage ApplicationDetailed DescriptionThe EV kit is designed to deliver 5V at load current up to 1A at the output from a 6.5V to 36V input supply. The switching frequency of the EV kit is configured at 400 kHz by leaving RT resistor open.The EV kit includes an EN/UVLO PCB pad and jumper JU1 to enable the output at a desired input voltage. The MODE/SYNC PCB pad and jumper JU2 allow an external clock to synchronize the device. Jumper JU2 allows the selection of the mode of operation based on light load-performance requirements. An additional RESET PCB pad is available for monitoring whether the converter output is in regulation or not.Soft-Start Input (SS)The EV kit offers an adjustable soft-start function to limit inrush current during the startup. The soft-start time is adjusted by the value of external soft start capacitor C3, connected between SS and SGND. The selected output capacitance (C SEL ) and the output voltage (V OUT ) deter-mine the minimum value of C3, as shown by the following equation:C3 ≥ 28 x 10-6 x C SEL x V OUTThe soft-start time (t SS ) is related to the soft-start capaci-tor C3 by the following equation:()SS -6C3t 5.55 10=×For example, in order to program a 1ms soft-start time, C3 should be 5600pF.Enable/Undervoltage-Lockout (EN/UVLO) ProgrammingThe MAX17630 offers an Enable and adjustable input undervoltage lockout feature. In this EV kit, for normal operation, leave the EN/UVLO jumper (JU1) open. When JU1 is left open, the MAX17630 is enabled when the input voltage rises above 6.4V. T o disable the MAX17630, install a jumper across pins 2-3 on JU1. See T able 1 for JU1 settings. The EN/UVLO PCB pad on the EV kit supports external Enable/Disable control of the device. Leave JU1 open when external Enable/Disable control is desired. A potential divider formed by R1 and R2 sets the input voltage (VINU) above which the converter is enabled when JU1 is left open.Choose R1 to be 3.32MΩ (max), and then calculate R2 as follows:()12INU R 1.215R V 1.215×=−where, V INU is the voltage at which the device is requiredto turn on, and R1 and R2 are in kΩ.For more details about setting the undervoltage lockout level, refer to the MAX17630 data sheet.Table 1. Converter EN/UVLO Jumper (JU1) Settings*Default position.SHUNT POSITIONEN/UVLO PIN MAX17630B OUTPUT1-2Connected to VINEnabledNot installed*Connected to the center node of resistor-divider R1 and R2Enabled, UVLO level is set by the resistor-divider between VIN and SGND2-3Connected to SGNDDisabled5V Output-Voltage ApplicationMode Selection (MODE/SYNC)The EV kit provides a jumper (JU2) that allows the MAX17630 to operate in PWM, PFM, and DCM modes. Refer to the MAX17630 data sheet for more details on the modes of operation. Table 2 shows the MODE SELECTION (JU2) settings that can be used to configure the desired mode of operation.External Clock Synchronization (MODE/SYNC)The EV kit provides MODE/SYNC PCB pad to synchronize the MAX17630 to an optional external clock. Leave Jumper (JU3) open when external clock signals are applied. In the presence of a valid external clock for synchronization, the MAX17630 operates in PWM mode only. For more details about external clock synchronization, refer to the MAX17630 data sheet.Active-Low, Open-Drain Reset Output (RESET )The EV kit provides a RESET PCB pad to monitor the status of the converter. RESET goes high when VOUT rises above 95% (typ) of its nominal regulated output voltage. RESET goes low when VOUT falls below 92% (typ) of its nominal regulated voltage.Hot Plug-In and Long Input CablesThe MAX17630BEVKIT# PCB layout provides an optional electrolytic capacitor (C6 = 22μF/50V). This capacitor lim -its the peak voltage at the input of the MAX17630B when the DC input source is “Hot-Plugged” to the EV kit input terminals with long input cables. The equivalent series resistance (ESR) of the electrolytic capacitor dampens the oscillations caused by interaction of the inductance of the long input cables and the ceramic capacitors at the buck converter input.Table 2. Mode Selection Jumper (JU2) Settings*Default position.SHUNT POSITIONMODE/SYNC PIN MAX17630B OUTPUT 1-2Connected to V CC DCM mode of operation 2-3*Connected to SGNDPWM mode of operation Not installedOPENPFM mode of operation5V Output-Voltage Application(V IN = 24V, V OUT = 5V, f SW = 400kHz, unless otherwise noted.)MAX17630B EV Kit Performance Report5V/div 5V/div1ms/divtoc072V/div RESET1A/div CONDITIONS:PWM MODE, 1A LOAD5V/div5V/div 1ms/divEN/UVLOtoc082V/div RESET1A/divCONDITIONS:PWM MODE, 20mA LOAD10V/div 2µs/divOUT(AC)toc0920mV/divLX LX1A/divCONDITIONS:PWM MODE, 1A LOAD5V Output-Voltage Application(V IN = 24V, V OUT = 5V, f SW = 400kHz, unless otherwise noted.)MAX17630B EV Kit Performance Report (continued)10V/div 20µs/divtoc1150mV/divLX 0.5A/divCONDITIONS:PFM MODE, 20mA LOAD50mV/div100µs/divtoc12OUT(AC)0.5A/divCONDITIONS:PWM MODE100mV/div 100µs/divLOAD TRANSIENT RESPONSE BETWEEN 0.5A AND 1Atoc130.5A/divCONDITIONS:PWM MODEGAINto16PHASEBODE PLOT100mV/div 100µs/divLOAD TRANSIENT RESPONSE BETWEEN 20mA AND 0.5Atoc14OUT(AC)OUT0.5A/div CONDITIONS:DCM MODE100mV/div200µs/divLOAD TRANSIENT RESPONSE BETWEEN 20mA AND 0.5Atoc15OUT(AC)OUT0.5A/divCONDITIONS:PFM MODE10V/div1µs/divOUT(AC)toc1020mV/divLX LX0.2A/divCONDITIONS:DCM MODE, 20mA LOAD,5V Output-Voltage ApplicationNote: Indicate that you are using the MAX17630B when contacting these component suppliers.SUPPLIER WEBSITE Coilcraft Murata Americas Panasonic Taiyo Yuden TDK SullinsCorpPARTTYPE MAX17630BEVKIT#EVKITS.No DesignatorDescriptionQuantityManufacturer Part Number 1C1 2.2µF, 10%, 50V, X7R, Ceramic capacitor (1206)1TDK C3216X7R1H225K160AE 2C2 2.2µF, 10%, 10V, X7R, Ceramic capacitor (0603)1MURATA GRM188R71A225KE153C35600pF, 2%, 25V, COG, Ceramic capacitor (0402)1MURATA GRM1555C1H562GE014C422µF, 20%, 25V, X7R, Ceramic capacitor (1210)1MURATA GRM32ER71E226ME155C5, C100.1µF, 10%, 16V, X7R, Ceramic capacitor (0402)2TAIYO YUDEN EMK105B7104KV 6C11, C15150pF, 10%, 100V, X7R, ceramic capacitor (0402)2TDK C1005C0G2A151J050BA 7C90.1µF, 10%, 50V, X7R, Ceramic capacitor (0402)1TDK C1005X7R1H104K050BE 8C6ALUMINUM-ELECTROLYTIC; 22UF; 50V; TOL = 20%; MODEL = FK SERIES1PANASONIC EEE-TG1H220P9L1INDUCTOR, 15µH; 20%; 3.9A (5mm x 5mm)1COILCRAFT XAL5050-153ME 10R1RESISTOR, 3.32MΩ, 1% (0402)1VISHAY DALE CRCW04023M32FK 11R2RESISTOR, 787kΩ, 1% (0402)1VISHAY DALE CRCW0402787KFK 12R3, R7RESISTOR, 0Ω (0402)2PANASONIC ERJ-2GE0R0013R6RESISTOR, 10KΩ, 1% (0402)1VISHAY DALE CRCW040210K0FK14U1HIGH-EFFICIENCY; SYNCHRONOUS STEP-DOWN DC-DC CONVERTER (TQFN16-EP 3mm x 3mm)1MAX17630BATE+15JU1, JU23-pin header (36-pin header 0.1” centers)2SULLINS PEC03SAAN 16-Shunts2SULLINS STC02SYAN17C13, C14OPEN: Capacitor (1210)0N/A 18L2OPEN: Inductor (4mm x 4mm)0N/A 19C7, C8, C12, C16OPEN: Capacitor (0402)0N/A 20R4, R5, R8OPEN: Resistor ( 0402)0N/A 21FB1OPEN: Ferrite Bead (0805)N/AJU2 2 - 3 SHORTDEFAULT JUMPER TABLEJUMPER SHUNT POSITIONJU1OPEN Component SuppliersOrdering InformationMAX17630BEVKIT# EV Kit Bill of Materials5V Output-Voltage Application5V Output-Voltage ApplicationMAX17630BEVKIT# EV Kit—Top Silkscreen MAX17630BEVKIT# EV Kit—Layer 2MAX17630BEVKIT# EV Kit—Top Layer MAX17630BEVKIT# EV Kit—Layer 35V Output-Voltage ApplicationMAX17630BEVKIT# EV Kit—Bottom Layer MAX17630BEVKIT# EV Kit—Bottom SilkscreenMaxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time.5V Output-Voltage ApplicationREVISION NUMBERREVISION DATE DESCRIPTIONPAGES CHANGED5/19Initial release—Revision HistoryFor pricing, delivery, and ordering information, please visit Maxim Integrated’s online storefront at https:///en/storefront/storefront.html.。
Polycom DMA 7000系统版本6.3.0_P1 补丁说明书
Patch NotesPolycom ® DMA™ 7000 System© 2015 Polycom, Inc. All rights reserved. POLYCOM®, the Polycom logo, and the names and marks associated with Po lycom’s products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. All other trademarks are property of their respective owners. 1Release label:6.3.0_P1 Built on version:Polycom DMA 7000 System v6.3.0 Released file(s):upgrade file for 6.1.x, 6.2.0, 6.2.1, and 6.3.0Purpose The primary focus of this patch is to resolve minor issues with WebRTC. Patch 1 for DMA 6.3.0 (i.e. 6.3.0_P1_Build_198923) contains code changes to address the following issues:❑DMA-14736 RealConnect conference not working properly if DMA template is configured with cascade for size. ❑DMA-14764 DMA Conference Templates could not be loaded when try to schedule pooled conference from XMA. ❑ DMA-14798 Random generated RealConnect chair codes may result in conference creation failure.❑ DMA-14825 DMA Supercluster/UnauthorizedPrefix: SIP Call with unauthorized prefix fail to establish when backup DMA forwards the call to the active DMA.❑DMA-14898 WebRTC/RPWS Intermittent IVR display – interrupts meeting. ❑DMA-14911 Max limit on WebRTC clients needs to 5. ❑DMA-14926 DMA SIP Peer – DNS resolution of Destination Network field on RE-INVITE (Outbound Calling). ❑DMA-14948 API –display-name property value changes after promotion. ❑DMA-14956 DMA doesn’t pass the participant name in the participant notification for Web RTC participant. ❑DMA-14971 Improper CANCEL handling with Weighted SIP Peers. ❑ DMA-15010 Collabutron redirect response code should be be 302 (temporary) instead of 301 (permanent).Prerequisites/Configuration Considerations∙ Systems may have Polycom DMA 7000 v6.1.x, v6.2.0, v6.2.1, or v6.3.0 installed∙ When upgrading from DMA 6.1.x, 6.2.0, 6.2.1, 6.3.0 to 6.3.0.1, the system will not preserve the call history information. To keep this data, backup the databases, upgrade the DMAs, and then restore the databases.© 2015 Polycom, Inc. All rights reserved. POLYCOM®, the Polycom l ogo, and the names and marks associated with Polycom’s products are trademarks and/or service marks of Polycom, Inc. and are registered and/or common law marks in the United States and various other countries. All other trademarks are property of their respective owners.2 NOTE : Upgrades from DMA 6.2.2.x to 6.3.0.1 are not supported5.0.x5.1.x→ → 5.2.x Yes DMA-upgrade_5.2.2.6-bld9r144761.bin 5.2.x6.0.x→ → 6.1.x n/a rppufconv.bin (Pre 6.1.0 to 6.1.3.1) 6.1.3_P1_Build_185272-rppufconv.bin 6.1.x6.2.0.x6.2.1.x → → → 6.3.0.1 Yes full.bin (Upgrade to 6.3.0.1) 6.3.0_P1_Build_198923-full.bin 6.3.0 → 6.3.0.1 No full.bin (Upgrade to 6.3.0.1)6.3.0_P1_Build_198923-full.bin6.2.2X 6.3.0.1 Not supported 6.2.2.x X 6.3.0.1 Not supportedInstallation Notes1. Download the upgrade file for dma_6.3.0.12. Login to DMA and navigate to Maintenance > Software Upgrade3. Select “Upload and Upgrade ” and choose the upgrade file4. DMA processes and applies patch。
SATO All-In-One Application 1-16用户手册说明书
Printing Labels from Microsoft BizTalk RFID ProviderUser ManualEdition 01October 2020CopyrightsAny unauthorized reproduction of the contents of this document, in part or whole, is strictly prohibited. © 2020 SATO Corporation. All rights reserved.Limitation of LiabilitySATO Corporation and its subsidiaries in Japan, the U.S and other countries make no representations or warranties of any kind regarding this material, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. SATO Corporation shall not be held responsible for errors contained herein or any omissions from this material or for any damages, whether direct, indirect, incidental or consequential, in connection with the furnishing, distribution, performance or use of this material.Specifications and contents of this document are subject to change without notice.TrademarksSATO is a registered trademark of SATO Holdings Corporation and its subsidiaries in Japan, the U.S. and other countries.Microsoft® and BizTalk® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.NiceLabel®is a registered trademark of Euro Plus d.o.o in the U.S.A. and other countries.All other trademarks are the property of their respective owners.Software Updating DisclaimerWhile all efforts have been taken to ensure accuracy and currency of the information contained herein, there are instances where the contents of this document may be outdated. In that case, proceed to your local SATO regional website (https:///drivers/redirect.html) to check whether an updated document has been made available for your reference.Contact InformationAccess the following site and select the region/country nearest to you.https:///about/locations.htmlTable of ContentsTable of Contents (3)1.Overview (4)2.Design and Export Template with NiceLabel Pro (5)2.1.Create label template using the NiceLabel Pro software. (5)2.2.Exporting Design as Template (9)3.Upload Template to Printer via BizTalk RFID Manager (11)3.1.Add Template (11)4.Printing RFID Tag from BizTalk RFID Manager (13)4.1.Print Tag (13)SATO distributes the BizTalk RFID Device Provider for Microsoft BizTalk Server. Users can print out RFID tags from a SATO XML RFID enabled printer using the BizTalk RFID Device Provider. This document is to explain the following steps to test print a RFID Tag from BizTalk RFID Manager.•Design NiceLabel template and export•Upload the template to SATO Printer using BizTalk RFID Manager•Use Microsoft BizTalk RFID Manager to perform test print.Template with NiceLabel Pro2.1. Create label template using the NiceLabel Pro software.1. Create a new label using the NiceLabel Pro software.2. Select RFID Enabled Printer Driver from Label Setup Wizard.3. Click Next and setup the label size.4. From the main Menu, select Data -> Variables to add variables.5. Click the “New” button to add variable. Make sure to add TagData (length 24), TagIdentifiervariable with exact name described here. It is important to follow exact name in order to print correctly by BizTalk RFID System.6. Create the variables as shown below.7. Add Fields to the design.It is preferable to use SATO printer resident font for all items for the optimize performance.However, static fields may use any font such as TTF Fonts.For variables fields, only printer resident font MUST be used.8. To add Variable Text or Barcode, click the down arrow icon at the right edge of the selected Tool,select “Use Existing Variable” and select the desired variable to add.9. For RFID Tag, select RFID Tag Data from sub menu. Select EPC from Data Fields List andchoose Variable Radio Button. Choose TagData from the dropdown list beside and click OK to confirm.10. Lastly, add Text Field with variable TagIdentifier into design and place anywhere within the label.This is required by BizTalk RFID System and will NOT be printed into actual label. The final label should look similar to below screenshot.11. Save the label design before proceeding.2.2. Exporting Design as Template1. Once the label is designed and saved, export the template into text file and upload to printerthrough BizTalk RFID Manager. By exporting the template file can be reused easily for multiple printers. In order to export to text file, set the Printer Port to “FILE:” at the printer properties dialog under Control Panel -> Printers & Faxes.2. Click File-> Export->Export to Printer.In “Select Export Method” dialog, select “XML export: Internal Flash” option and click OK.3. It will prompt a dialog for output file name; enter the desired template file name with full path fromthe entry box.3 Upload Template to Printer via BizTalkRFID Manager3.1. Add Template1. Open RFID Manager and go to Devices.2. Select the printer and right click Print ->Manage Templates Menu to view template stored inprinter.Click “Add” button and select template file to upload the new template. If uploading template withsame format name, the existing template should be deleted first using “Delete” button.3. The list will be refreshed with the newly uploaded template.4 Printing RFID Tagfrom BizTalk RFID Manager4.1. Print Tag1. Select Print Label menu from printer context menu.2. Click “Next” until the “Template Selection Screen”. Select desired template to print and click“Next”.3. Fill in the variables to print. Click “…” button for variable data entry box.4. Make sure to input 24 Hex char for “TagData” and minimum 4 Hex char for “TagIdentifier”.“TagIdentifier” cannot be odd number of character (e.g. count must be 4,6 8 etc.).5. Click “Next” and the system will send the print data to printer and will display the status.Printer will print out 1 RFID Tag and the dialogs will display “Success” with the “Tag ID”(TagIdentifier number)。
viewme-um004_-zh-e说明书
SMPP协议中文版
协议1接口协议简介此协议描述短消息中心和扩展短消息实体（即电话银行业务模块）之间的协议数据传输格式。
此协议运行在底层通信协议（例如TCP/IP，）上。
参考资料《GSM (Version 》：European digital cellular telecommunications system(Phase 2); Interface protocols for the connection of Short Message Service Centres(SMSCs)to Short Message Entities(SMEs);GSM ：European digital cellular telecommunications system(Phase 2);Technical realization of the Short Message Service Point to Point》《GSM (Version ：Digital cellular telecommunications system(Phase 2+)；Alphabets and language_specific information》《GSM (Version ：Digital cellular telecommunications system; Example protocol stacks for interconnecting Service Center(SC) and Mobile_services Switching Center(s)(MSC)》1.1缩略语SME 短消息实体SMPP 短消息点对点协议SMSC 短消息效劳中心ESME 扩展短消息实体SMEI 短消息扩展接口（协议）2功能概述通过SMEI，ESME（例如寻呼台，语音邮箱系统）能连接（BIND）或断连（UNBIND）短消息中心，提交（SUBMIT）短消息。
Mitsumi Electric Co., Ltd. Wavit11 User's Manual.p
Wavit11 User’s Manual Revision 1.01Revision HistoryDecember 6, 2001 Revision 1.0 Translated from Japanese edition (Rev. 1.0) January 19, 2002 Revision 1.01 Regulatory Compliance Notice changedContentsRevision History (2)About This Guide (5)Regulatory Compliance Notices (6)1. Preface (8)1. Preface (8)2. Accompanied Accessories (8)3. Features (8)4. How to use Wavit11 (9)5. About Wireless LAN Network (10)5.1. Ad-Hoc LAN (11)5.2. IBSS LAN (12)5.3. Infrastructure LAN (13)5.4. Wireless Bridge (14)6. Installation method of Wavit11 Configuration Utility (15)6.1. Microsoft Windows Version (16)6.2. Confirm an Ethernet port (17)6.3. Confirm the TCP/IP protocol (19)6.4. Confirm an IP Address (25)6.5. Installation of the Wavit11Configuration Utility (28)7. Wavit11 Set Up (33)7.1. How to Start the Wavit11Configuration Utility (34)7.2. How to setup the Ad-Hoc mode (38)7.3. How to Setup the 802.11 Ad-Hoc mode (41)7.4. How to Setup the Infrastructure mode (44)7.5. How to Setup the Both mode (47)7.6. How to Setup the AP mode (51)7.7. How to Setup the Wireless Bridge Mode (55)7.8. How to Change the Wavit11 IP address (59)7.9. How to Change the Control Password (61)7.10. Wavit11 Initialization (63)8. Encryption Setting (65)8.1. Encryption setting (65)8.2. Original Encryption (68)8.2. 40bit WEP Encryption (71)8.3. 128bit WEP Encryption (74)8.4. Encryption Disable (77)9. Wavit11Setting up (79)9.1. Connection to personal computer (80)9.2. Connection to Printer (81)9.3. Connection to Network Equipment (82)10. Items that can be set with Configuration Utility (83)10.1. Operational Mode (84)10.2. SS ID (85)10.3. Channel (86)10.4. Data Rate (87)10.5. Roaming (88)10.6. Hidden Node Compensation (89)10.7. Details (90)10.8. RTS Threshold (91)10.9. Fragmentation Threshold (92)10.10. Short Retry Limit (93)10.11. Long Retry Limit (94)10.12. Beacon Interval (95)10.13. SSID transmission (96)10.14. Authentication Algorithm (97)10.15. Basic Rate Set (98)10.16. Encryption mode (99)10.17. Encryption Key (100)10.18. Default Key (101)10.19. Destination Address (102)11. Interoperability with third vendor wireless LAN (103)11.1. Confirmed wireless LAN card (103)11.2. Confirmed Access Point (104)11.3. Setting (105)12. Troubleshooting (106)13. Specifications (108)About This GuideAbsolutely do not do the operation when the instruction is given with this mark.Please pay attention in the case you do the operation indicated with this mark.The relevant usage is explained. Please refer, as occasion demands. This is for an explanation such as terminology.Regulatory Compliance NoticesWavit is a registered trademark of Mitsumi Electric Co., Ltd.Wi-Fi TM is a registered trademark of Wireless Ethernet Compatibility Alliance. RC4 is a registered trademark of RSA Security Inc. in United State and other country.Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation.All company names and product names are trademark of their respective companies.Mitsumi are not responsible for any damage or loss caused by the Wavit11 Wireless LAN.Mitsumi hold the copyright on this User’s Manual. Anyone cannot copy or reproduce this User’s manual unless Mitsumi grant agreement in writing form.If this product is used near the television set or radio receiver, the TV display may be sometimes disturbed or the noise may be heard in audio output. In such a situation, it will be necessary to install this product far from TV and radio set. This product may affect the medical apparatus, so you cannot install this product inside a hospital.If you install this product near the microwave oven,communication performances may degrade due to the radio waveemitted from microwave oven. Install this product far from microwave oven or prevent from the simultaneous usage.Accompanied AC adapter is designed for 117volts AC use only.The use of AC other than 117volts is dangerous and not permitted.The use of other AC adapters is prohibited. If other AC adapters were used, the product would heat or it may lead to a fire.1. PrefaceThank you for purchasing the Wavit11. This user’s manual includes various notices to allow you to use the Wavit11 safely and properly. Keep this anytime and read carefully. In this way, you can always refer to this.2. Accompanied AccessoriesThe following accessories are accompanied to Wavit11.If you could not check all accessories, contact with the distributor.AccessoriesItem QuantityNoteWavit11 Wireless LAN 1AC Adapter 1Ethernet Cable 1 Straight Cable (1m)Wall Mount Attachment 1User’s Manual 1 This documentWavit11 Configuration Utility 1 3.5 inch Floppy disk3. FeaturesThe Wavit11 is standalone wireless LAN with 10BASE-T interface. When using Wavit11, you can install wireless network not only to personal computers but also to printer and other network equipment that have 10BASE-T ports. The Wavit11 is connected to network devices with 10BASE-T cable, so you do not need to install device drivers to set up Wavit11.The Wavit11 operates as Access Point that supports up to 16 Wavit11. Also, it operates as Wireless Bridge. Wireless Bridge connects two networks that are physically separated by two Wavit11s.Wavit11Wireless LANAC Adapter EthernetCableWall MountAttachmentUsersManual ConfigurationUtility5. About Wireless LAN NetworkThere are 4 types of wireless LAN network that using Wavit11.Make a selection according to the usage of the wireless LAN network. Wireless LAN Type FunctionAd-Hoc LAN The network consists of only wireless clients.IBSS LAN The network consists of only wireless clients. Infrastructure LAN The network combined both wired and wireless clients. Wireless Bridge The network connects two networks wirelessly.5.1. Ad-Hoc LANThe Ad-Hoc LAN is a network consisting of only wireless LAN. It is the network that does not connect to the Ethernet backbone and external network such as Internet. There is not a restriction on the number of wireless LAN units in the Ad-Hoc LAN.Set the communication mode of Wavit11 to “Ad-Hoc” mode.5.2. IBSS LANThe IBSS LAN is a network of only wireless LAN. It is the network that does not communicate to the Ethernet backbone and external network such as Internet. There is not a restriction on the number of wireless LAN units in the IBSS LAN. Set the communication mode of Wavit11 to “802.11 Ad-Hoc” mode.5.3. Infrastructure LANCommunication is established via an Access Point in the infrastructure LAN, therefore direct communication with other Wavit11s is not possible. This is the network that is used in such an occasion where Ethernet is being connected to Access Point and Internet access is carried out through Ethernet.Set the communication mode of one Wavit11 to “AP” mode and set the other Wavit11 communication mode to “Infrastructure” mode.5.4. Wireless BridgeThe Wireless Bridge connects two wired network using two Wavit11. The maximum number of network equipment that can be connected to wired LAN is 16.Set the communication mode of Wavit11 to “Wireless Bridge” mode.6. Installation method of Wavit11 Configuration Utility6.1. Microsoft Windows VersionWavit11 Configuration Utility runs on Microsoft Windows of the following version.OS Status NotesWindows95 Install 4.01 or above Internet Explorer Windows95 OSR2 Install 4.01 or above Internet Explorer Windows95OSR2.5Install 4.01 or above Internet Explorer Windows98 OKWindows98 SE OKWindows Me OKWindows NT 4.0 WorkStation Install 4.01 or above Internet Explorer Windows NT SP3 is required to install Internet Explorer 4.01.Windows 2000 OK Windows XP OK6.2. Confirm an Ethernet portWavit11 Configuration Utility should be installed to the personal computer with Ethernet port. Also, the device driver needs to be set up appropriately. Confirm in accordance with the following procedure.[STEP1] Select “Start”->”Setting”->”Control Panel”.[STEP2] Click “Network” icon in the control panel.[STEP3] Check to see t hat an Ethernet adapter is installed in “Configuration” page.[STEP4] Click the “Cancel” button.6.3. Confirm the TCP/IP protocolThe TCP/IP protocol should be installed to the personal computer with Wavit11 Configuration Utility. It is necessary that Wavit11 Configuration Utility is set up appropriately. Confirm the TCP/IP protocol in accordance with the following procedure.[STEP1] Select “Start”->”Setting”->”Control Panel”[STEP2] Click “Network” icon in the “Control Panel”.[STEP3] Check to see that the relevant TCP/IP protocol is installed that corresponds to the Ethernet adapter used in the “Configuration” page. Select TCP/IP protocol corresponding to the Ethernet adapter and click the “Properties” button.[STEP4] Confirm your selection in the “IP address” page. Which one is selected, either “Obtain an IP address automatically” or “Specify an IP address”?[STEP5] Click “Cancel” button.[STEP6] Click “Cancel” button.[STEP10] In the case that “Specify an IP address” is selected in the “IP Address” page, check that the “IP Address” and “Subnet Mask” are set.[STEP11] Click the “Cancel” button.[STEP12] Click the “Cancel” button.6.4. Confirm an IP Address[STEP1] Click “Start”->”Run”[STEP2] Input “winipcfg” to “Open” and click “OK” button.[STEP3] Select Ethernet adapter at “Adapter Address” in “IP Configuration” window.[STEP4] Confirm the “IP Address” and “Subnet Mask”.[STEP5] Click “OK” button.6.5. Installation of the Wavit11Configuration Utility [STEP1] Insert Wavit11Configuration Utility disk to drive A. [STEP2] Click “My Computer” icon.[STEP3] Click “3.5 ½ floppy (A:)” icon.[STEP4] Click “Setup” icon.The “Install Shield Wizard” window appears.[STEP5] Click the “Next>” button in “Install Shield Wizard” window.[STEP6] Select “Destination Folder”. Click “Next>” button to install the Configuration Utility to the default folder. Click the “Browse” button in the case that you want to install to a different folder.[STEP7] Select Program Folder. Click “Next>” button if you agree the default folder. If you prefer to install it to another folder, select from the “Existing Folders” and click “Next” button.The “Setup Status” appears.[STEP8] Install Shield Wizard Complete appears. Click the “Finish” button.。
奇冠(四位代码)诊断、电脑故障传统诊断与稳定性测试卡概要
电脑故障传统诊断、奇冠诊断与稳定性测试卡使用说明书V1.1（适用于台式机和笔记本电脑）全球唯一，用卡必读中国发明专利号：03126857.9专利证书号：208776侵权必究中国·广东·奇冠电子有限公司研制前言非常感谢您选择奇冠公司的传奇稳（传统诊断——BIOS POST代码、奇冠诊断、奇冠稳定性测试，简称“传奇稳”）系列产品，如果您有什么疑问，请登陆我司网站 查询详情解答；您还可以将具体问题发E-mail 到p678@，我们会及时回复您。
感谢您的信赖和支持！本卡采用大规模IC集成模块，结构紧凑，稳定可靠，确保产品品质符合高标准要求。
内部资源更丰富，抗干扰性能更优越，自身故障率极低。
无须用户安装软件，软件全部内置，我们将前沿科技与使用者行为科学相结合，进行了人性化功能设计，使用非常方便。
本公司是一家专业研发、生产诊断卡的企业，生产的新一代、准确王、二合一卡系列及传奇稳系列产品已获CE认证并受中国国家专利保护（专利号：03126857.9），侵权必究。
我公司已不再生产传统诊断卡，请广大用户在购买时认准“奇冠”字样商标及防伪标识。
本用户手册所提到的产品规格及资讯仅供参考，实际内容亦会随时更新，恕不另行通知。
如果您要了解最新产品资讯，请访问我公司网站。
本说明书不断改进，欢迎用户向我司多提意见和建议。
免责声明：对使用本卡给用户造成的损失，本公司恕不承担。
欢迎访问广州奇冠电子公司网目录一、用户必读 (1)（一）传统诊断部分 (1)（二）奇冠诊断部分 (1)（三）稳定性测试部分 (1)二、传奇稳卡功能特点 (2)（一）传统故障诊断功能特点 (2)（二）奇冠诊断功能特点 (2)（三）稳定性测试功能特点 (2)三、传奇稳卡部件介绍 (3)四、传奇稳卡指示灯介绍 (4)（一）传奇稳卡指示灯含义 (4)1.为什么CLK、FRAME、IRDY指示灯要改进，改进后有何好处？ (4)（二）代码性质与稳定性测试结果结合分析及处理方法说明表 (5)（三）稳定性测试状态说明 (6)（四）根据指示灯显示状态找出故障部位及其解决方法 (6)五、奇冠代码含义说明 (7)六、传统诊断功能的POST代码含义 (30)1．AMI BIOS (30)2．Award BIOS (37)3．Phoenix BIOS (40)七、声音代码含义表 (44)1．AMI BIOS自检鸣响含义 (44)2．Award BIOS自检鸣响含义 (44)3．Phoenix BIOS自检鸣响含义 (44)八、流程图 (46)图1、检测流程总图 (46)图2：稳定性测试流程图 (47)图3：如何利用本卡判断“不稳定”原因流程图 (48)图4：如何利用本卡判断引起“不稳定”故障部位及排除流程图 (49)图5：如何利用本卡采用相应手段诱发出引起“不稳定”原因流程图 (50)图6：如何利用本卡判断复位故障流程图 (51)图7：如何利用本卡判断是否为市电引起流程图 (52)图8：如何利用本卡判断是否为内存条混插引起流程图 (53)图9：如何利用本卡判断是否为电源负载能力不够引起流程图 (54)图10：如何利用本卡判断是否为散热不良引起流程图 (55)图11：如何利用本卡判断是否为灰尘引起流程图 (56)图12：如何利用本卡判断是否为强磁干扰引起流程图 (57)图13：如何利用本卡判断是否为接触不良引起流程图 (58)九、常见问题与解决方法：.........................................................................................1．如何利用本卡选配电脑工作稳定的UPS？ (59)2．如何利用本卡检验开发的外围设备对电脑的干扰？ (61)3．如何利用本卡挑选用于重要场合的电脑？ (60)4．测试时不拔除硬盘是否会对电脑不利？ (61)5．如何选购稳定性测试卡？ (61)6．显示“no”是什么意思？怎样处理？ (30)一、用户必读（一）传统诊断部分1．诊断卡显示一系列代码后，BIOS代码停在“FF”或“00”，则表示主板自检已通过。
MAAP-000073-PKG003中文资料
Amplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFeatures♦ 1.0 Watt Saturated Output Power Level ♦ Variable Drain Voltage (6-10V) Operation♦ MSAG ™ProcessDescriptionThe MAAP-000073-PKG003 is a 3-stage 1.0 W power amplifier with on-chip bias networks in a 20 lead, 5 mm PQFN package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications.Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM’s GaAs Multifunction Self-Aligned Gate (MSAG) Process.The 5 mm PQFN package has a lead-free finish of leads that are RoHS compliant and is compatible with a 260o C reflow tempera-ture. The package also features low lead inductance and an excellent thermal path. The MTTF is 1,000,000 hours at 170o C.1. T C = Case Temperature2. Adjust V GG between –2.5 and –1.2V to achieve specified Idq.Parameter SymbolTypicalUnitsBandwidth f 4.4-7.0 GHz Output Power P OUT 30 dBm 1-dB Compression Point P1dB 29 dBm Small Signal Gain G 26 dB Input VSWR VSWR 1.3:1Output VSWR VSWR 2.5:1 Gate Current I GG 5.0 mA Drain CurrentI DD 460 mA Output Third Order Intercept TOI 38 dBm Output Third Order Intermod,P out = 19 dBm (DCL)IMD340 dBcElectrical Characteristics: T C = 35°C 1, Z 0 = 50 Ω, V DD = 8V, I DQ = 330mA 2, P in = 8dBm, R G = 220ΩPrimary Applications♦ Point-to-Point Radio ◊ 5 and 6 GHz BandsYYWW AP073G XXX MACOMAlso Available in:Description DieCeramic Pkg Sample BoardDie Sample BoardPart NumberMAAPGM0073-DIE MAAP-000073-SMB003 MAAP-000073-SMB004Ceramic PackageMAAPGM0073Amplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantMaximum Ratings 3Operating InstructionsThis device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply V GG = -2 V, V DD = 0 V.2. Ramp V DD to desired voltage, typically 8.0 V.3. Adjust V GG to set I DQ , (approximately @ –2 V).4. Set RF input.5. Power down sequence in reverse. Turn V GG offCharacteristic SymbolMin TypMaxUnitDrain Voltage V DD 6.0 8.0 10.0 V Gate Voltage V GG -2.5 -2.0 -1.2 V Input Power P IN6.08.0dBmThermal Resistance ΘJC 34.8 °C/W Case TemperatureT CNote 5 °CRecommended Operating Conditions 4Parameter SymbolAbsolute MaximumUnits Input Power P IN 12.0 dBm Drain Supply Voltage V DD +12.0 V Gate Supply Voltage V GG -3.0 V Quiescent Drain Current (No RF) I DQ 520 mA Junction Temperature T J 170 °C Storage TemperatureT STG-55 to +150°CQuiescent DC Power Dissipated (No RF)P DISS 2.8 W 3. Operation beyond these limits may result in permanent damage to the part.4. Operation outside of these ranges may reduce product reliability.5. Case Temperature = 170°C — ΘJC * V DD * I DQPower Derating Curve, Quiescent (No RF)0.00.51.01.52.02.53.03.5020406080100120140160180Maximum Allowable Case Temperature [°C]P e a k P o w e r D i s s i p a t i o n [W a t t s ]Amplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 6. Small Signal Gain & Saturated Output Power, Power Added Efficiency andDrain Current vs. Case Temperature at 6.0 GHZ, VD = 8V, and IDQ = 0.33A2022242628303234363840-20-10102030405060708090Case Temperature (ºC)S S G (d B ), P O U T (d B m ), P A E (%)0.00.10.20.30.40.50.60.70.80.91.0I D S (A )SSGPOUTPAEIDSFigure 5. Saturated Output Power vs. Frequency and Case Temperatureat VD = 8V and IDQ = 0.33A4.04.55.05.56.06.57.07.5Frequency (GHz)O u t p u t P o w e r (d B m )-20ºC 35ºC 90ºCFigure 4. Saturated Power Added Efficiency vs. Frequency and Quiescent Bias Condition(VDD / IDQ)510152025303540454.04.55.05.56.06.57.07.5Frequency (GHz)P A E (%)6V / 0.40A 8V / 0.33A 10V / 0.27AFigure 3. Saturated Output Power vs. Frequency and Quiescent Bias Condition(VDD / IDQ)4.04.55.05.56.06.57.07.5Frequency (GHz)O u t p u t P o w e r (d B m )6V / 0.40A 8V / 0.33A 10V / 0.27AFigure 1. P1dB vs. Frequency and Quiescent Bias Condition(VDD / IDQ)4.04.55.05.56.06.57.07.5Frequency (GHz)P 1d B (d B m )6V / 0.40A 8V / 0.33A 10V / 0.27AFigure 2. Small Signal Gain and Input & Output VSWR vs. Frequency and Quiescent Bias(Vdd / IDQ)4812162024283236404.04.55.05.56.06.57.07.5Frequency (GHz)G a i n (d B )123456V S W R 6V / 0.40A 8V / 0.33A 10V / 0.27ASmall Signal GainOutput VSWRInput VSWRAmplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 12. Gain vs. Output Power and Frequencyat VD = 10V and IDQ = 0.27A121416182022242628303234121416182022242628303234Output Power (dBm)G a i n (d B )4.5 GHz 6.0 GHz 7.0 GHzFigure 11. Output Power vs. Input Power and Frequencyat VD = 10V and IDQ = 0.27A121416182022242628303234-12-10-8-6-4-224681012Input Power (dBm)O u t p u t P o w e r (d B m )4.5 GHz 6.0 GHz 7.0 GHzFigure 10. Gain vs. Output Power and Frequencyat VD = 8V and IDQ = 0.33A121416182022242628303234121416182022242628303234Output Power (dBm)G a i n (d B )4.5 GHz 6.0 GHz 7.0 GHzFigure 9. Output Power vs. Input Power and Frequencyat VD = 8V and IDQ = 0.33A121416182022242628303234-12-10-8-6-4-2246810Input Power (dBm)O u t p u t P o w e r (d B m )4.5 GHz 6.0 GHz 7.0 GHzFigure 8. Gain vs. Output Power and Frequencyat VD = 6V and IDQ = 0.40A121416182022242628303234121416182022242628303234Output Power (dBm)G a i n (d B )4.5 GHz 6.0 GHz 7.0 GHzFigure 7. Output Power vs. Input Power and Frequencyat VD = 6V and IDQ = 0.40A121416182022242628303234-12-10-8-6-4-22468Input Power (dBm)O u t p u t P o w e r (d B m )4.5 GHz 6.0 GHz 7.0 GHzV D = 8VV D = 10VV D = 6VAmplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 18. Drain Current vs. Input Power and Frequencyat VD = 10V and IDQ = 0.27A0.00.10.20.30.40.50.60.70.8-12-10-8-6-4-2024681012Input Power (dBm)D r a i n C u r r e n t (A )4.5 GHz 6.0 GHz 7.0 GHzFigure 17. Power Added Efficiency vs. Input Power and Frequencyat VD = 10V and IDQ = 0.27A 0510********3540-12-10-8-6-4-224681012Input Power (dBm)P A E (%)4.5 GHz 6.0 GHz 7.0 GHzFigure 16. Drain Current vs. Input Power and Frequencyat VD = 8V and IDQ = 0.33A0.00.10.20.30.40.50.60.70.8-12-10-8-6-4-20246810Input Power (dBm)D r a i n C u r r e n t (A )4.5 GHz 6.0 GHz 7.0 GHzFigure 15. Power Added Efficiency vs. Input Power and Frequencyat VD = 8V and IDQ = 0.33A0510********3540-12-10-8-6-4-2246810Input Power (dBm)P A E (%)4.5 GHz 6.0 GHz 7.0 GHzFigure 14. Drain Current vs. Input Power and Frequencyat VD = 6V and IDQ = 0.40A0.00.10.20.30.40.50.60.70.8-12-10-8-6-4-202468Input Power (dBm)D r a i n C u r r e n t (A )4.5 GHz 6.0 GHz 7.0 GHzFigure 13. Power Added Efficiency vs. Input Power and Frequencyat VD = 6V and IDQ = 0.40A0510********3540-12-10-8-6-4-22468Input Power (dBm)P A E (%)4.5 GHz 6.0 GHz 7.0 GHzV D = 8VV D = 10VV D = 6VAmplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 24. Third Order Intermod vs. Output Power and Frequencyat VD = 10V and IDQ = 0.27A01020304050607080901008101214161820222426Fundamental Output Power, Single Tone (dBm)I M 3 (d B c )4.4 GHz 6.0 GHz 7.0 GHzFigure 23. Third Order Intercept vs. Output Power and Frequencyat VD = 10V and IDQ = 0.27A30323436384042444648508101214161820222426Fundamental Output Power, Single Tone (dBm)I P 3 (d B m )4.4 GHz 6.0 GHz 7.0 GHzFigure 22. Third Order Intermod vs. Output Power and Frequencyat VD = 8V and IDQ = 0.33A8101214161820222426Fundamental Output Power, Single Tone (dBm)I M 3 (d B c )4.4 GHz 6.0 GHz 7.0 GHzFigure 21. Third Order Intercept vs. Output Power and Frequencyat VD = 8V and IDQ = 0.33A30323436384042444648508101214161820222426Fundamental Output Power, Single Tone (dBm)I P 3 (d B m )4.4 GHz 6.0 GHz 7.0 GHzFigure 20. Third Order Intermod vs. Output Power and Frequencyat VD = 6V and IDQ = 0.40A8101214161820222426Fundamental Output Power, Single Tone (dBm)I M 3 (d B c )4.4 GHz 6.0 GHz 7.0 GHzFigure 19. Third Order Intercept vs. Output Power and Frequencyat VD = 6V and IDQ = 0.40A30323436384042444648508101214161820222426Fundamental Output Power, Single Tone (dBm)I P 3 (d B m )4.4 GHz 6.0 GHz 7.0 GHzV D = 8VV D = 10VV D = 6VAmplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 26. Third Order Intermod vs. Case Temperature and Frequency at Single Carrier Output Power Level = 19 dBm, VD = 8V and IDQ = 0.33A1015202530354045505560-20-10102030405060708090Case Temperature (ºC)I M 3 (d B c )4.4 GHz 6.0 GHz 7.0 GHzFigure 25. Third Order Intercept vs. Case Temperature and Frequency at Single Carrier Output Power Level = 19 dBm, VD = 8V and IDQ = 0.33A -20-10102030405060708090Case Temperature (ºC)I P 3 (d B m )4.4 GHz 6.0 GHz 7.0 GHzAmplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 28. Recommended Bias Configuration.Note: The exposed pad centered on the package bottom must be connected to RFand dc ground for proper electrical and thermal operation.Figure 27. 5x5 mm 20-Lead MLP.Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines. Additional Precaution: All parts must receive a bake-out of 125ºC for 24 hours prior to any solder reflow operation.*Application Notes can be found by going to the Site Search Page of M/A-COM’s web page (/Application%20Notes/index.htm) and searching for the required Application Note.ooAP073G100pF(as close to the pack age aspossible)0.1μFV D DY Y W WAP 073G X X X MACOM0.1μFV G G100pF(as close to t he pack age as p ossible)220ΩAmplifier, Power, 1.0 W 4.4-7.0 GHzRev -Preliminary DatasheetMAAP-000073-PKG003CompliantFigure 29. Demonstration Board P/N MAAP-000073-SMB003 (available upon request).V G G G N D(T w i s t e d P a i r )R GYYW W AP073G XXX M ACOMV D D G N D(T w i s t e d P a i r )Additional bypassing may be required if wires are longer than 12".。
Royal Alpha-9170用户编程指南说明书
To Program Manager Passwords ...................................................................... 20 To Use Manager Passwords .......................................................................... 20 DATE ••••••••••••••••••••••••••••••••••••••••••.•••••••••••••••••••••.•••••••••••••••••••.••.•••••••••• 21 TIME •••••.•.•.•..•.•...•••••.•...•••••••.••..•••••••..•••••••.•.•.••••••••••••••••••.•••.••...•••••••• 21 MACHINE NUMBER •••.•••••••••• ; ••••.••••••••.•••••••••••••••••.••.••••••••••••.••••.••••.•..•••.•.•••. 21 TAX RATES • • • • • • • • • • . . . . • . . • • . • • . • • • • • • • • • • • • • • • • • • • • • . • • . • • • . • • • • • • • • • • . • • • • • • . . • . • . • • • • . • • • • • • • • .• 22-24 To Set Type of Tax Being Used ........................................................................... 22 FIxed Tax Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Tax Table Rate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 23-24 DEPARTMENT PROGRAMMING . • • • • . • • • • • • • • . • • • • • • . • • • • . • • . • • • • . • • • • • • • • . • • • • • • • • • • • • • • • • . • • . • • • • • • • • •• 25-28 COUPON DISCOUNT •••.••.•••••••.••••••••••••••••••.••••••.•••••••••••••••••.•.••••••••.•.•.•••••••• 29-30 MINUS PERCENTAGE DISCOUNT (-%) •••••••••••.•••..•.••..•.•...••••••.•.•••..••..•.••.••..•....•.••..• 31-32 PLUS PERCENTAGE (+%) ............................................................•.....•........... 33-34 PRICE LOOK-UP (PLU) •.•.••..••..•.•.•••••..•••.•••••••..•••..• : • • • • • • • . • • • . • • • . • • . • • • • . • . • . • . • • • . . • .• 35-36 TRAINING MODE .••.••..••...•••••••..•.••••.•.•..•••••••••••••.•.••••••••.•••.••.•••••..•.•••...•••••.• 37 GRAND TOTAL PRESET ••.••••.•..•.••••.••.•••••••••••••••••.•..•••••.••••••.••••.•••••••••••••••••••••.• 38 TRANSACTION NUMBER PRESET •••••••••.•••••••••••••••••••••..••••••••.•••••••••..••••.•••••.••••••••••• 39 Xl and X2 COUNTER PRESET ..••.•.••••.•.••••.••...••••..••....•.•..••...•••..•.•.••••...••.•.•..••••••.• 40 Zl and Z2 COUNTER PRESET ...•.••••••••••.••.•......•.•..•.•••.....•...•.••..••.....•....•.•.••••.••.•.. 41 PROGRAMMING ALPHANUMERIC DESCRIPTIONS. • . • • . • . • • • . • . • . . • • . . . • • • • • • . • • • • . • • • • . • . • • . . . . . . • • . . . . . . .. 42-47 FLAG OPTIONS. • • . . . • • . • • • • • • • • • • • • • • . • • • • • • . • . • . . • . • . . . • • • • • • • . • • . • . • • • . • • . • • • • • . . • • . . . • . . • . . • • • • • •. 48-61 PROGRAM CONFIRMATION REPORTS ....•.•.•••...•...••••••.•.••••.•.••••••.•••..••••••...••.•..•..•.••.•• 62 Program Confirmation Report - Main Printout ................................................................ 62 Confirmation Report of Tax Rate Programming ............................................................... 63 Program Confirmation Report of Clerk 10 Numbers, Clerk Confirmation and Department ...... . . . . . . . . . . . . . . . . . . . . . .. 64-6S PLU Confirmation Report ................................................................................ 66
hp photosmart 7600 series 基本操作指南
请让合格的电工进行检查
目录
1 使用入门 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 欢迎 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 查找信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 打印机部件 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 前部 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 照片纸盘 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 后部 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 控制面板 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 指示灯 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 存储卡插槽 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 菜单结构 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 纸张信息 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 在进纸盘中装入纸张 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 在照片纸盘中装入纸张 . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 保持照片纸的质量 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 打印墨盒信息. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 支持的打印墨盒. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 安装或更换打印墨盒 . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 取出打印墨盒 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 保存打印墨盒 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 墨水备份打印模式 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 设置打印机首选项 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 调整照片亮度 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 设置日期和时间标记 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 打印无边框照片. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 设置 Exif 打印 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 选择纸张设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 设置打印质量 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 设置 LCD 屏幕语言和国家 / 地区. . . . . . . . . . . . . . . . . . . 18 回复至出厂默认设置 . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
pkgdepR 1.0.0 软件包说明说明书
Package‘pkgdepR’October14,2022Type PackageTitle Statically Determine Function Dependencies Between PackagesVersion1.0.0Maintainer Ed Peyton<*******************>Description Statically determine and visualize the function dependencieswithin and across packages.This may be useful for managing functiondependencies across a code base of multiple R packages.License MIT+file LICENSEURL https:///BugReports https:///edpeyton/pkgdepR/issuesEncoding UTF-8RoxygenNote7.1.1Imports visNetwork,dplyr,magrittr,viridisLite,scales,utilsNeedsCompilation noAuthor Ed Peyton[aut,cre](<https:///0000-0002-1427-0306>)Repository CRANDate/Publication2022-02-1608:10:02UTCR topics documented:all_info_ns (2)deps (2)get_functions (3)is.pkgdepR (3)ls_namespace_info (4)plot.pkgdepR (4)print.pkgdepR (5)summary.pkgdepR (6)%>% (6)Index712deps all_info_ns Get all information on a namespaceDescriptionGet all information on a namespaceUsageall_info_ns(ns)Argumentsns A character representing the namespace to explore.ValueA named list.deps Get environment dependency objectDescriptionThis function creates an object of class pkgdepR,representing the network of function calls between one or more packages.Usagedeps(pkg,exported_only=FALSE)Argumentspkg A character vector of the environments to explore.Should be on the search path.Cannot be base.exported_only Boolean.Whether to include non-exported functions.DetailsAn object of class pkgdepR is a list with three named objects:•funs:a data frame describing the functions.Contains columns id,label,package,exported, group,and name.•links:a data frame containing the linkages between functions.Contains columns from andto.•pkg:a character vector containing the packages explored.get_functions3ValueAn object of class pkgdepR.Exampleslibrary(pkgdepR)deps(pkg="pkgdepR")get_functions Get functions from namespaceDescriptionGet functions from namespaceUsageget_functions(ns)Argumentsns A character representing the namespace to explore.ValueA character vector of function names.is.pkgdepR pkgdepR objectDescriptionAn internal generic function.Methods for is.pkgdepR should only return TRUE if the class is pkgdepR.Usageis.pkgdepR(x)Argumentsx Object to be tested.ValueBoolean.TRUE when x is of class pkgdepR.4plot.pkgdepR ls_namespace_info Get namespace informationDescriptionGet namespace informationUsagels_namespace_info(ns,...)Argumentsns A character representing the namespace to explore....Other arguments passed to ls.ValueA character vector of the names to search for a given namespace.plot.pkgdepR Visualizing package dependenciesDescriptionThis function is a simple wrapper for plotting a network visualization using visNetwork.Usage##S3method for class pkgdepRplot(x,width=NULL,height=NULL,main=NULL,submain=NULL,alpha=0.8,...)print.pkgdepR5Argumentsx An object of class pkgdepR.width The width of the vis.js render.height The height of the vis.js render.main The title.To remove the title,pass list(text=NULL).submain The subtitle.To remove the subtitle,pass list(text=NULL).alpha A transparency value to use for colors.Must be between0and1....Other arguments passed onto visNetwork and viridis.ValueAn object of classes visNetwork and htmlwidget.Exampleslibrary(pkgdepR)deps(pkg="pkgdepR")%>%plot(option="E",direction=-1)deps(pkg="pkgdepR")%>%plot(option="D",alpha=0.5,main=list(text=NULL)) deps(pkg="pkgdepR")%>%plot(option="D",alpha=0.8,main=list(text=NULL))%>%visNetwork::visInteraction(dragNodes=FALSE)print.pkgdepR Print pkgdepR objectDescriptionPrint pkgdepR objectUsage##S3method for class pkgdepRprint(x,...)Argumentsx An object of class pkgdepR....Redundant argument for consistency with method.ValueNo return value.6%>% summary.pkgdepR Summarise pkgdepR objectDescriptionSummarise pkgdepR objectUsage##S3method for class pkgdepRsummary(object,...)Argumentsobject An object of class pkgdepR....Redundant argument for consistency with method.ValueNo return value.%>%Imported magrittr forward-pipe operatorDescriptionImported from magrittr.Index%>%,6all_info_ns,2deps,2get_functions,3is.pkgdepR,3ls,4ls_namespace_info,4magrittr,6plot.pkgdepR,4print.pkgdepR,5search,2summary.pkgdepR,6viridis,5visNetwork,4,57。
TE Portable Crimp Tools商品说明书
58606-1Portable Crimp Tools, Commercial Crimp Tooling, Operator Releasable &Adjustable, Removable/Interchangeable, TE Product Specification (114-)08/31/2020 04:07PM | Page 1 For support call+1 800 522 6752Application Tooling>Portable Crimp ToolsCertification:Upon Request for FeeSpecification Type:TE Product Specification (114-)Die Sets Type:Removable/InterchangeableRatchet Configuration:Operator Releasable & AdjustableTool Grade:Commercial Crimp ToolingFeaturesOtherCrimp Form-Wire Barrel Type Open Barrel - F CrimpTool Grade Commercial Crimp ToolingRatchet Configuration Operator Releasable & AdjustableDie Sets Type Removable/InterchangeableSpecification Type TE Product Specification (114-)Certification Upon Request for FeePower Type Battery, Electric, ManualTool Type PRO-CRIMPER Hand ToolProduct ComplianceFor compliance documentation, visit the product page on >EU RoHS Directive 2011/65/EU Out of ScopeEU ELV Directive 2000/53/EC Out of ScopeChina RoHS 2 Directive MIIT Order No 32, 2016Not reviewed for China RoHS complianceEU REACH Regulation (EC) No. 1907/2006Current ECHA Candidate List: JUN 2020(209)Candidate List Declared Against: JAN 2019(197)Does not contain REACH SVHCHalogen Content Not Yet Reviewed for halogen content58606-1 ACTIVEAMPTE Internal #:58606-1Portable Crimp Tools, Commercial Crimp Tooling, OperatorReleasable & Adjustable, Removable/Interchangeable, TE ProductSpecification (114-)View on >08/31/2020 04:07PM | Page 2For support call+1 800 522 6752Halogen Content Not Yet Reviewed for halogen content Solder Process CapabilityNot applicable for solder process capabilityProduct Compliance DisclaimerThis information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked.Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulations, TE’s information on SVHC in articles for this part number is still based on the European Chemical Agency (ECHA) ‘Guidance on requirements for substances in articles’(Version: 2, April 2011), applying the 0.1% weight on weight concentration threshold at the finished product level. TE is aware of the European Court of Justice ruling of September 10th, 2015 also known as O5A (Once An Article Always An Article) stating that, in case of ‘complex object’, the threshold for a SVHC must be applied to both the product as a whole and simultaneously to each of the articles forming part of its composition. TE has evaluated this ruling based on the new ECHA “Guidance on requirements for substances in articles” (June 2017, version 4.0) and will be updating its statements accordingly.TE Model / Part #962981-12,5MMD SOCKET CONTACTTE Model / Part #962998-11,5MMD SOCKET CONTACTTE Model / Part #962971-12,5MMD PIN CONTACTTE Model / Part #1703018-1DIA 1.5MM CONTACT PIN,LPTE Model / Part #962992-11,5MMD PIN CONTACTTE Model / Part #828920-2DICHTSTOPFEN 2,5MMDTE Model / Part #828904-2SINGLE WIRE SEAL FOR J.P.T.CONTE Model / Part #828905-1SINGLE-WIRE-SEAL(5MM HOLE)TE Model / Part #828904-1SINGLE WIRE SEAL FOR J.P.T.CONTE Model / Part #828920-1EINZELADERDICHTUNGTE Model / Part #828921-1EINZELADERDICHTUNGTE Model / Part #CAT-R7602-T273ROUND CONNECTOR SYSTEM, PIN AND SOCKETCompatible Parts08/31/2020 04:07PM | Page 3For support call+1 800 522 6752TE Model / Part #539952-2ERGO DIE MCP 2,8K ETE Model / Part #3-1579007-7EXTRACTION TOOLTE Model / Part #539674-2MATRIZE JPTTE Model / Part #539950-2ERGO DIE MCP 1,5 KTE Model / Part #282180-3FF 187 REC 0.5-1.5MM2 TPPBTE Model / Part #1579007-1AUSDRUECKWERKZEUGTE Model / Part #1-1579007-8EXTRACTION TOOLTE Model / Part #1-929984-1STIFTKONTAKT 1,5MMDTE Model / Part #1-929983-3STIFTKONTAKT 1,5MMDTE Model / Part #1-929983-2STIFTKONTAKT 1,5MMDTE Model / Part #1-929983-1STIFTKONTAKT 1,5MMDTE Model / Part #962993-11,5MMD PIN CONTACTTE Model / Part #1-1719188-0DIA 1.5 SOCK CON,TEMINALTE Model / Part #962999-11,5MMD SOCKET CONTACTTE Model / Part #1-1418497-0DIA 1.5 SOCK CON TERMINALCustomers Also BoughtDocumentsDatasheets & Catalog Pages1-1773865-2_1015_Commercial Manual Hand ToolsEnglishCrimp Term Whitepaper-Use the Right Tool 1-1773953-1EnglishCRIMPING WHERE FORM MEETS FUNCTIONEnglishBottoming DiesEnglishEnglishInstruction SheetsInstruction Sheet (U.S.)EnglishInstruction Sheet (U.S.)English08/31/2020 04:07PM | Page 4 For support call+1 800 522 6752。
ecma-376标准
ecma-376标准ECMA-376标准是一种用于描述和定义电子文档格式的国际标准。
它由Ecma国际（前身为欧洲计算机制造商协会）制定，旨在提供一种通用的文件格式，以便不同的应用程序和平台可以相互兼容和交换电子文档。
ECMA-376标准最初于2006年发布，后来经过多次修订和更新。
它包括两个主要部分：Office Open XML（OOXML）和Open Packaging Convention（OPC）。
Office Open XML是ECMA-376标准的核心组成部分，它定义了一种基于XML的文件格式，用于表示和存储办公文档，如文本文档、电子表格和演示文稿。
这种文件格式具有可扩展性、可读性和可编辑性，可以在不同的应用程序之间进行无缝的交换和共享。
Open Packaging Convention是ECMA-376标准的辅助部分，它定义了一种用于打包和组织电子文档的规范。
它使用ZIP压缩算法将文档的各个组成部分打包成一个单一的文件，同时提供了元数据和目录结构，以便应用程序可以轻松地访问和处理文档中的内容。
ECMA-376标准的设计目标是提供一个开放、可互操作和可扩展的文件格式，以满足不同应用程序和平台之间的需求。
它的优点包括：1. 兼容性：ECMA-376标准可以与多种应用程序和平台兼容，包括微软的Office套件、谷歌的G Suite和苹果的iWork等。
2. 可扩展性：ECMA-376标准支持自定义扩展，使开发人员可以根据自己的需求添加新的功能和特性。
3. 可读性：由于ECMA-376标准使用XML作为文件格式的基础，因此文档内容可以轻松地阅读和理解。
4. 可编辑性：ECMA-376标准定义了一套标准的API和工具，使开发人员可以方便地对文档进行编辑和修改。
5. 兼容性：ECMA-376标准与其他相关标准（如HTML、CSS和SVG）兼容，可以与Web技术无缝集成。
ECMA-376标准在电子文档领域具有广泛的应用，特别是在办公自动化和文档交换方面。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Amplifier, Power, 16W 1.3-2.5 GHzRev —Advance DatasheetMAAP-000076-PKG0011. T C = Case Temperature2. Adjust V between –2.6 and –1.2V to achieve specified I .Parameter SymbolTypicalUnitsBandwidth f 1.3-2.5 GHzOutput Power P OUT 42 dBm1-dB Compression Point P1dB 41 dBmSmall Signal Gain G 25 dB Power Added EfficiencyPAE 29 % Input VSWR VSWR 1.3:1Output VSWR VSWR 1.6:1Gate CurrentI GG 33 mADrain Current, under RF DriveI DD 5.2 A 2nd Harmonic2f25dBcElectrical Characteristics: T C = 45°C 1, Z 0 = 50 Ω, V DD = 10V, I DQ = 3.8A 2, P in = 24 dBm, R G = 30 ΩDescription DieCeramic Pkg Sample BoardDie Sample BoardPart NumberMAAPGM0076-DIE MAAP-000076-SMB001 MAAP-000076-SMB004Also Available in:Features♦ 16 Watt Saturated Output Power Level ♦ Variable Drain Voltage (8-10V) Operation ♦ MSAG ProcessPrimary Applications♦ Radio Communications ♦ SatComDescriptionThe MAAP-000076-PKG001 is a 2-stage 16W power amplifier with on-chip bias networks in a 10 lead flange-mount ceramic package, allowing easy assembly. The package is hermetic and provides an excellent thermal path. This product is fully matched to 50 ohms on both the input and output. External DC blocking capacitors are not required since they are incorporated into the MMIC design. It can be used as a power amplifier stage or as a driver stage in high power applications.Fabricated using M/A-COM’s repeatable, high performance andhighly reliable GaAs Multifunction Self-Aligned Gate (MSAG™)Process, each device is 100% RF tested on wafer to ensure performance compliance.Pin #Description 1VGG 2N/C 3RF IN 4N/C 5VGG 6VDD 7N/C 8RF OUT 9N/C 10VDDMAAP-000076Amplifier, Power, 16W 1.3-2.5 GHzRev —Advance DatasheetMAAP-000076-PKG001Maximum Ratings 3Operating InstructionsThis device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply V GG = -2.7 V, V DD = 0 V.2. Ramp V DD to desired voltage, typically 10.0 V.3. Adjust V GG to set I DQ , (approximately @ –2.2 V).4. Set RF input.5. Power down sequence in reverse. Turn V GG off last.Characteristic SymbolMin TypMaxUnitDrain Voltage V DD 8.0 10 10 V Gate Voltage V GG -2.6 -2.0 -1.2 V Input Power P IN2427dBmThermal Resistance ΘJC°C/WCase TemperatureT CNote 5 °CJunction Temperature T J 150 °C Recommended Operating Conditions 4Parameter SymbolAbsolute MaximumUnits Input Power P IN 29 dBm Drain Supply Voltage V DD +12.0 V Gate Supply Voltage V GG -3.0 V Quiescent Drain Current (No RF) I DQ 6.1 A Junction Temperature T J 170 °C Storage TemperatureT STG-55 to +150°CQuiescent DC Power Dissipated (No RF)P DISS 60.8 W 3. Operation beyond these limits may result in permanent damage to the part.4. Operation outside of these ranges may reduce product reliability.5. Case Temperature = 150°C — ΘJC * V DD * I DQAmplifier, Power, 16W 1.3-2.5 GHzRev —Advance DatasheetMAAP-000076-PKG001Figure 1. Package DimensionsThis is a high frequency, low thermal resistance package. The package consists of a cofired ceramic construction with a copper-tungsten base and iron-nickel-cobalt leads. The finishconsists of electrolytic gold over nickel plate.Amplifier, Power, 16W 1.3-2.5 GHzRev —Advance DatasheetMAAP-000076-PKG001Figure 2. Recommended Bias ConfigurationAssembly Instructions:This flange mount style package provides a robust interface between a highly integrated GaAs MMIC device and a circuit board which may be assembled using conventional surface mount techniques. A thin shim made of a thermally and electrically conductive, ductile material must be used prior to installation of the ceramic package for proper thermal and electrical performance. Refer to M/A-COM Application Note #M567* for more information regarding shim material and mounting screw torque requirements.For applications where surface mount components are to be installed after the ceramic package installation, this package will not be damaged when subjected to typical convection or IR oven reflow profiles. Refer to M/A-COM Application Note #M538* for maximum allowable reflow time and temperature. Alternatively, the package leads may be individually soldered. Whether an iron or hot gas soldering equipment is used, care should be taken to insure that the temperature is well controlled and electric static discharge (ESD) safe. * A pplication Notes are available upon request.Biasing Notes:♦ A negative bias must be applied to V GG before applying a positive bias to V DD to prevent damage to theamplifier.Amplifier, Power, 16W 1.3-2.5 GHzRev —Advance DatasheetMAAP-000076-PKG001Figure 3. MAAP-000076-PKG001 Evaluation Board* Additional bypassing may be required if wires are longer than 12”.。