产品检讨-English

合集下载

带电话手表检讨作文

带电话手表检讨作文

带电话手表检讨作文English Answer.The advent of smartwatch has revolutionized the way we communicate and stay connected. With the integration of a variety of features, including cellular connectivity, these devices offer a convenient and portable alternative to traditional smartphones. However, the use of smartwatches raises important questions about their impact on children's development, safety, and privacy.One of the primary concerns with smartwatches for kids is their potential to distract from learning and social interaction. The constant notifications and access to games and other apps can be tempting for children to focus on their devices rather than engaging with their surroundings. This can lead to a decrease in attention span, difficulty concentrating, and reduced social skills.Another concern is the safety of children who wearsmartwatches. While these devices can provide a sense of security by allowing parents to track their child's location, they can also be used by strangers to locate and target children. Additionally, the built-in camera and microphone can be used to take pictures or record conversations without the child's knowledge or consent.Privacy is another important consideration when it comes to smartwatches for kids. These devices collect a significant amount of personal data, including location, activity, and sleep patterns. This data can be shared with third-party companies without the child's or parents' knowledge or consent, raising concerns about potential misuse or identity theft.In addition to these concerns, there are also practical considerations to keep in mind when considering a smartwatch for your child. The battery life of these devices can be limited, requiring frequent charging. The durability of the watch is also important, as children are likely to be rough with their devices.Given these concerns, it is important to carefully consider the pros and cons of giving your child a smartwatch. If you do decide to purchase a smartwatch for your child, there are several steps you can take to minimize the risks:Set clear rules and expectations for the use of the smartwatch.Limit the amount of time your child spends using the watch.Disable non-essential features, such as games andsocial media apps.Monitor your child's activity on the watch and talk to them about online safety.Consider using parental control apps to manage the watch's features and track your child's location.Ultimately, the decision of whether or not to give yourchild a smartwatch is a personal one. By weighing the potential benefits and risks, and by taking steps to mitigate the concerns, you can make an informed decision that is right for your family.中文回答。

工厂中英文对照检讨报告

工厂中英文对照检讨报告

工厂中英文对照检讨报告中英文对照检讨报告1成品平均肉厚为0.82左右.The average thickness is about 0.82mm.2成品平均肉厚为0.6mm.The average thickness of part is 0.6mm.3成品内厚均匀.The thickness of part is even.4此处肉厚不均,成品易缩水.共六处.请修改.As the figure shows, the thickness is uneven, so it is easy to shrink. Please modify it, 6 areas in total.5成品太薄,成型比较困难,请修改成品.The thickness of part is too thin, so it is difficult to be molded, please modify it.6如图所示,塑件太薄请修改成品,厚度至少0.80mmAs the figure shows, the thickness is too thin, please modify it to 0.8mm at least.7如图所示,塑件太薄,不易充填,请将此处肉厚从0.40mm增加至0.50mm.As the figure shows, the thickness of part is too thin to fill enough, please adding material from 0.4mm to 0.5mm.8如图所示肉厚过厚,容易导致成品缩水.As the figure shows, the thickness is too thick that cause shrinking easily.9此处可能缩水,因此处肉厚较厚.There may be shrinkage, because the thickness is too thick.10平均肉厚0.53mm,最薄处仅0.2mm,有可能滞流,不易成型.The average thickness is 0.53mm, but the thinnest area is only 0.2mm, where the hesitation would exist and the part can’tbe molded easily.11请将周围红色面向公模侧拔模2.0度.Please draft the red surface 2.0 degrees along the core.12为防止成品粘母模,请将图示红色面向公模方向增加拔模到3度.As the figure shows, please draft the red surface 3-degree along the core side to prevent it (from) sticking to the cavity.13以红色线为基准,黄色面向母模侧3度拔模,蓝色面向公模侧2度拔模.Keep the red line as datum, please draft the yellow surface 3-degree along the cavity, and the blue surface 2 degrees along the core.14建议将红色面以蓝色线为基准做公模2度拔模.Keep the blue line as datum, suggest drafting the red surface 2 degrees along the core side.15.请将绿色面向母模侧拔模3度Please draft the green surface 3 degrees along the cavity side.16请将红色面做公模侧拔模!Please draft the red face along the cavity side.17如图:图中红色面,请沿斜销后退方向做3度拔模.As the figure shows, please draft the red surface 3 degrees along the backward direction of the lifter (using the arrow as the direction of lifter)18如图所示,请将红色面拔模在公模侧(全周),以防止粘母模.As the figure shows, please draft the red surface along the core side to prevent the product sticking to the cavity.19请将图示绿色面沿滑块后退方向3度拔模,用红色箭头表示其后退方向.As the figure shows, please draft the green surface 3 degrees along the releasing direction of the slider. ( using the red arrow as the releasing direction of slider.)20请将红色面向公模侧增加拔模,从0.5度加大到2.0度.Please increase the draft angle of the red surface from 0.5 to 2 degrees along the core21如图所示:请将红色面沿滑块后退方向拔模3度!As the figure shows, please draft the red surface 3 degrees along the releasing direction of slider.22为避免模仁尖角,请修改红色面拔模至公模侧.Please draft the red surface along the core side to avoid sharp corner. 23请将此处拔模3.0度,因角度太小会粘滑块. (左右共二处)Because the draft angle is too small, the part would stick to slider, so please draft this surface 3 degrees. (both sides).24红色框内区域必须沿斜销方向拔模0.5~1.0度,以防铲胶.To prevent cutting plastic , the area as the red frame shown must be drafted 0.5~1.0 degree along the lifter’s direction.25请将红色面拔模角度增加至4度以增加模仁插破角度!To increase the shut- off angle between cavity and core, please draft the red surface 4 degrees.26将红色面向母模侧拔模3度(第二次指出)Draft the red surface 3-degree along the cavity side (point out again) 27绿色面未拔模,请确认是否以0度抛光,否则向母模侧增加拔模角5度.As the figure shows, please check whether the green surface must be on zero draft for good polishing , otherwise add 5 degrees on the cavity side.28.绿色面在公模侧未拔模,建议将其做公模2度拔模.The green surface hasn’t been drafted along the core side. Suggest drafting it by 2-degree.29.如图所示,红色面为母模侧.As the figure shows, the red surface is in cavity side.30.如图所示,此处均为铁件与模仁插破封胶,易跑毛边,请将此处插破角增加至5度以上.As the figure shows, it is easy to occur flash, please add drafting angle to 5 degrees.31.建议将红色面公模拔模8度,以便于斜销成型.Suggest drafting the red surface 8 degrees along the core side for being molded by the lifter easily.32.请将图示绿色面沿斜销后退方向2度拔模,用红色箭头表示其后退方向. Please draft the green surface 2 degrees along the backward direction of lifter (using the red arrow as the direction of lifter)33.请将桔色面作斜销后退方向拔模5度.Please draft the orange surface 5 degrees along the backward direction of lifter.34.如图:现有成品外观面在红线处有分模线痕迹.建议将蓝色公模面向母模侧拔模3.0度,这样PL线下移到圆角处.As the figure shows, there will be visible mark on the appearance surfaces, suggest drafting blue surface 3.0 degrees along the cavity side (both sides) to change the PL to the place of radius.35.产品一周红色面在母模侧未拔模,建议将其做母模3度拔模.The red surface around product hasn’t been drafted on the cavity side, suggest drafting it by three degrees.36.红色面在公模侧未拔模,建议将其做公模3度拔模.The red surface hasn’t been drafted on the core side, suggest drafting it by 3- degree.37.请取消断差!Please cancel this step.38.请去掉此断差,避免模仁此处插破!Please delete the step to avoid the shut-off between the cavity and core.39.请照右图取消C角Please modify model according to the right figure.40.方案1: 取消全周R角Proposal 1:Cancel the R(all round)41.方案2: 全周增加断差Proposal 2:add the step(all around)42.建议此边倒圆角Suggestion: blend the edge43.请将红色线倒圆角0.20mm!Please round 0.2mm at the red line.44.如图所示: 请照右图修改!As the figure shows, please modify the model according to the right picture.45.滑块后退方向the releasing direction of slider46.如图示,用红色箭头表示滑块后退方向As the figure shows, use the red arrow as the releasing direction of slider.47.滑块分模线如图所示,箭头所示方向为滑块后退方向The parting line of slider is as the figure shown, the red arrow shows the direction of the slider’s movement.48.成品采用牛角进胶,胶口位置如图所示.Banana-gate is adopted as the figure shown.49.成品采用边式浇口进胶,浇口位置如图所示.To adopt the side gate, and the gate location is as the figure shown 50.成品采用边浇口进胶, 浇口位置如图所示.请确认!Gate type is edge gate and the location is as the figure shown, please confirm it.51.其效果见模流分析,建议采用阀胶口,省料头!Suggest adopting the valve gate to save the material, and refer to the mold flow analysis to see its effect.52.成品采用潜进胶,胶口位置如图所示.Gating type is submarine gate, and the gate location is as the figure shown.53.采用阀针浇口,位置如上图红色圈所示,该方案需修改成品.As the figure shows, to adopt valve gate, please confirm it.54.建议在成品上做于此类似的肋利于进胶,且牛角胶口如图所示.For injecting fluently, suggest adding a rib like this, and using banana gate as shown.55.浇口在成品厚度方向的中间不会影响成品外观.The gate is in the middle of the thickness, which will not affect the appearance of the product.57.成品采用点进浇(进胶位置如图),建议取消胶口处肋,并在浇口处做一小凹坑.To adopt pin gate as the figure shows, suggest canceling the rib in the area of the gate and adding a concave.58.如图示采用点进浇,请确认,如果采用此方案,请照图示修改成品Adopt pin gate as the figure shows, please confirm it. If accept, please t modify the product as shown.59.成品采用边进胶,建议在成品上做5.0~2.0凹槽.To adopt side gate, suggest adding a concave by 5.0mm~2.0mm.60.7支套筒顶针,其余圆顶针和扁销Seven sleeves as the highlighted yellow areas shows, others are ejector pins and flat pins.61.为了保证成品的外观,PL线修改方案→取消一周的红色圆角The first solution is to cancel the red round for getting a good appearance of the product.62.为了保证成品的外观,PL线修改方案二是从最大轮廓减胶产生一个0.03mm的断差.The second solution is adding a step (0.03mm) along the circle of the red round for getting a good appearance of the product.63.采用隧道滑块成型,滑块的分模线如图示.Adopt tunnel slider molding, and the slider’s parting line is as shown.64.由于分模线都在一周的圆角上会影响成品外观,建议修改的二种方案详见P12和P13.The parting lines will affect appearance of the product, there are two methods in P12 and P13.65.如图所示;此处为铁件与模仁插破封胶,易跑毛边,请个修改如右图所示.As the figure shows, it is easy to occur flash, please modify model.66.如图所示;此处铁件与塑件两连接孔错位,请修改As the figure shows, the holes on the steel don’t align with the holes on the plastic, please modify model.67.如图所示;因铁片加铁,此处边接孔需移位(共两处),请修改.As the figure shows, move the holes (two places), please modify model.68.成品此处间隙太小,建议将红色所示特征单边加大0.85mm,以便用斜销成型. The gap is too small, suggest enlarging the red feature by 0.85mm per side for molding by angular lifter.69.成品此处分线不顺滑,建议修改.The parting line here is not smooth, suggest modifying it.70.如图所示,红线处孔用于定位,需精确加工.建议将铁件2的定位孔尺寸做得比铁件1的定位孔大(以免1和2焊接后有微动的错位导致铁位定位不准).The hole of the red zone is precision-machined for locating, suggest enlarging orientation holes of the steel 2, and it is bigger than the steel 1 as shown.71.为避免注射时铁件变形,建议修改成品,如图所示.Suggest modifying the model as shown to reduce warp during injecting process.72.为避免注射时铁件变形,建议修改塑件( 前后加二对应的定位孔),如图所示. Suggest modifying the model as shown to reduce warp during injecting process.73.铁件蓝色面太长侧壁无法定位,建议修改铁件使蓝色面不得超出铁件红色面的延伸面,如图所示.The blue surface is too long to locate, suggest modifying the blue surface of the steel not to overstep the extend surface of the red as shown.74.成品如图所示部位空间太小,所拆滑块强度太弱,请加大到至少1.5mm以上并在上图中圆圈处倒R角.As the figure shows, the space is too small, so intension of the slider will be infirm, please add the dimension to 1.5mmt at least, and add the round in the circle marked.75.请在图示位置加两肋使其强度增加,以免被滑块拉伤.As the figure shows, to avoid dragging the part, please add two ribs on the product to be stronger.76.如图红色面,分模时在模仁上会有倒勾.As the figure shows, there will occur undercut in the red surface of the cavity.77.成品修改尺寸参考Reference of modification78.沿开模方向的拔模分析.Drafting analysis of mold opening directing.79.建议用成品上蓝色面取代红色面.Suggest replacing the red surface with the blue surface.80.利于封胶.The convenience of sealing.81.此处将采用母模入子.Cavity insert will be adopted here.82.此处分模线为曲线,较复杂,请修改成直线.The parting line as shown is curved line, please change it toa straight line.83.为避免模仁尖角,请参照右图修改成品分模线.To avoid the weak-steel, please modify the parting line according to the right figure.84.为避免模仁尖角,请修改如右图所示.The area shown is weak steels in the core. Please modify the model. 85.成品此处太穿孔,有尖角,请修改,共2处.The product has the large bore and tine. Please check it, 2 areas in total.86.如图所示,成品此处有尖角,请修改.As the figure shows, there is sharp corner on the product, please modify it.87.红色箭头为斜销运动方向.The red arrow shows the direction of the lifter.88.顶针位置如图所示.The location of the ejectors is as shown.89.产品顶出位置如上图所示。

产品道歉信英语作文

产品道歉信英语作文

产品道歉信英语作文Dear Valued Customers,。

I hope this letter finds you well. I am writing on behalf of our entire team to express our deepest apologies for the recent issues that have arisen with our product. We are fully aware that the quality of our product has not been satisfactory, and we are truly sorry for any inconvenience or disappointment this may have caused you.First and foremost, we would like to acknowledge that the problems with our product were not just isolated incidents. We have received numerous complaints from our loyal customers, highlighting various issues such as faulty components, inconsistent performance, and a lack of durability. These are serious concerns that we take very seriously, and we want to assure you that we are committed to rectifying these issues immediately.We understand that as consumers, you have entrusted uswith your hard-earned money, and we have failed to deliver a product that meets your expectations. This is a grave mistake, and we are deeply remorseful for our shortcomings. We want to assure you that we are taking all necessary steps to ensure that this does not happen again.To begin with, we have launched an in-depth investigation into the root causes of these issues. We have identified several areas that require immediate attention, including improved quality control measures, stricter supplier selection criteria, and enhanced product testing protocols. We are also reviewing our manufacturing processes to identify any inefficiencies or.。

产品有害之处英文作文

产品有害之处英文作文

产品有害之处英文作文英文:As a virtual assistant, I am not capable of experiencing harm caused by products, but I can provide information on the topic. Products can be harmful in various ways, such as causing health problems, environmental damage, and even social issues.Firstly, some products can cause health problems. For example, certain cosmetics and personal care products contain harmful chemicals that can cause skin irritation, allergies, or even cancer. Similarly, some food products may contain excessive amounts of sugar, salt, or additives, which can lead to obesity, heart disease, or other health problems.Secondly, products can also cause environmental damage. For instance, some products are made from non-renewable resources, which can lead to depletion of natural resourcesand contribute to climate change. Moreover, some products are not biodegradable and can pollute the environment, such as plastic bags or disposable cups.Lastly, products can cause social issues. For example, some products are made using child labor or other forms of exploitation, which can violate human rights and contribute to social inequality. Additionally, some products are marketed in a way that promotes unrealistic beautystandards or perpetuates harmful stereotypes, which canhave negative impacts on individuals and society as a whole.In conclusion, products can have harmful effects on our health, the environment, and society. It is important for consumers to be aware of these issues and make informed choices when purchasing products.中文:作为一名虚拟助手,我无法亲身经历产品造成的危害,但我可以提供相关信息。

产品不良 英文作文

产品不良 英文作文

产品不良英文作文The product I bought was a complete disaster. It was supposed to be a state-of-the-art smartphone, but it turned out to be a total letdown. The first thing that struck me was its poor battery life. It couldn't even last half a day without needing to be charged. It was frustrating to constantly have to carry around a charger or power bankjust to keep my phone alive.Not only that, but the camera quality was also abysmal.I was expecting crisp, clear photos, but instead, I got blurry and grainy images. It was disappointing, especially considering the price I paid for the phone. I couldn't capture any memorable moments without worrying about the terrible photo quality.Another major issue was the phone's software. It was incredibly slow and laggy. Simple tasks like opening an app or typing a message took forever. It was infuriating to have to wait for the phone to catch up with my actions. Ifelt like I was using a relic from the Stone Age rather than a modern smartphone.The build quality of the phone was equally disappointing. It felt cheap and flimsy in my hands. The buttons were wobbly and didn't provide a satisfying click.I was always worried that the phone would break or fall apart with the slightest mishap. It lacked the durability and sturdiness that I expected from a high-end device.To make matters worse, the customer service was nonexistent. When I contacted the company to express my dissatisfaction, I was met with indifference and unhelpful responses. It was clear that they didn't care about their customers or their product's quality. It was a frustrating experience that left me feeling unheard and ignored.Overall, this product was a complete waste of money. It failed to live up to its promises and left me with nothing but frustration and disappointment. I would not recommendit to anyone and will definitely think twice before purchasing from this company again.。

产品不良的英文作文

产品不良的英文作文

产品不良的英文作文I bought a new phone last week, but it started acting up after just a few days. The screen keeps freezing, and sometimes the touch screen doesn't respond at all. It's really frustrating because I rely on my phone for work and communication.The worst part is that I tried to contact the customer service, but they were not helpful at all. They kept giving me the runaround and didn't offer any solutions to fix the problem. It's really disappointing to spend so much money on a product and then receive such poor customer support.I also bought a pair of shoes online, but when they arrived, they were nothing like the picture. The color was completely off, and the material felt cheap and flimsy. I was really looking forward to wearing them, but now I don't think I'll ever be able to.I recently purchased a blender, and it worked fine fora few weeks, but then it started making a strange noise and emitting a burning smell. I'm worried that it might be a fire hazard, so I stopped using it altogether. It's frustrating to spend money on something that turns out to be so unreliable.I ordered a book from an online bookstore, but when it arrived, it was damaged and had pages missing. I was really looking forward to reading it, but now I have to go through the hassle of returning it and waiting for a replacement.It's really inconvenient and disappointing.。

产品不好用的英文道歉信(范本)

产品不好用的英文道歉信(范本)

产品不好用的英‎文道歉信产品‎不好用的英文道‎歉信篇‎一:英‎文致歉信_范文‎道歉信 Le‎t ter of‎Apolog‎我们在工作或‎生活中,有时难‎免会犯一些错误‎,写封致歉信就‎显得很有必要。

‎道歉信通常包括‎以下内容:‎表示歉意;‎道歉的原由;出‎现差错的原因;‎提出弥补措施;‎请求原谅。

写道‎歉信的语言要诚‎挚,解释的理由‎要真实,不要显‎出丝毫的虚情假‎意。

好的道歉信‎不仅会取得对方‎的谅解,还会增‎进彼此的感情。

‎写作三步走‎:表‎示歉意-说明具‎体原因、提出补‎救办法-再次致‎歉、希望得到理‎解 Tips‎:在写作过程‎中,尽可能提供‎比较合理的理由‎。

如果违反生活‎常识将导致扣分‎。

在解释完原‎因后,尽量提供‎一个合适的补救‎办法,使行文更‎加完满。

订阅‎收藏《考研英语‎写作范文100‎篇》系列文章‎(‎1) Dire‎t ions: ‎Y ou are‎invite‎d to a ‎d inner ‎a t afr‎i end&#3‎9;s hou‎s e, but‎ou are‎not ab‎l e to a‎t tend b‎e ause o‎f the p‎r eparat‎i on for‎a ing ‎e xamina‎t ion. W‎r ite a ‎l etter ‎t o our ‎f riends‎to exp‎r ess ou‎r apolo‎g, expl‎a in our‎reason‎,and s‎u ggest ‎a meeti‎n g at a‎n other ‎t ime. Y‎o u shou‎l d rite‎about ‎100 ord‎s on AN‎S WER SH‎E ET ‎ Do no‎t sign ‎o ur on ‎n ame at‎the en‎d of th‎e lette‎r. Use ‎L i Ming‎instea‎d. Do n‎o t rite‎the ad‎d ress. ‎范文:‎ Dear ‎A nne, T‎h ank ou‎for ou‎r invit‎a tion t‎o dinne‎r at ou‎r home ‎t omorro‎evenin‎g. Unfo‎r tunate‎l, it i‎s muh t‎o m reg‎r et tha‎t I ann‎o t join‎ou and‎our fa‎m il, be‎a use I ‎i ll be ‎f ull ou‎p ied th‎e n for ‎a n impo‎r tant e‎x am ing‎the da‎after ‎t omorro‎.I fee‎l terri‎b l sorr‎for mi‎s sing t‎h e hane‎of suh‎a happ‎get-to‎g ether,‎and I ‎h ope th‎a t all ‎o f ou e‎n jo a g‎o od tim‎e. Is i‎t possi‎b le for‎ou and‎meto ‎h ave a ‎p rivate‎meetin‎g after‎a rd? If‎so, pl‎e ase do‎n't‎hesita‎t e to d‎r op me ‎a line ‎a bout o‎u r pref‎e rable ‎d ate. I‎do lon‎g for a‎pleasa‎n t hat ‎i th ou.‎Please‎allo m‎e to sa‎sorr a‎g ain. R‎e gards,‎Li Min‎g译文:‎亲爱的‎安:‎感谢你邀请我于‎明日晚上与你和‎你的家人共进午‎餐。

产品质量问题检讨书范文(三篇)

产品质量问题检讨书范文(三篇)

产品质量问题检讨书范文[公司名称]产品质量问题检讨书范文(二)尊敬的各位领导、同事:您们好!我是[公司名称]的一名员工,负责[产品名称]的质量控制工作。

今天,我写这封检讨书,对我们产品出现的质量问题进行深刻的反思,向各位领导和同事们表达我对产品质量问题所导致的诸多不良影响的歉意,并提出改进措施,以期避免再次发生类似问题。

首先,我要诚恳地向公司领导和同事们道歉。

我们的产品质量问题给公司带来了巨大的损失,也给客户带来了极大的困扰和不满。

这主要是我在工作中对产品质量控制不够严格,未能及时发现和解决潜在问题所致。

我对我的失职尽管深感惭愧,但我将承担起应有的责任和后果,并确保此类问题绝不再次发生。

在此次产品质量问题的处理过程中,我知道公司领导和同事们对该问题付出了很多的努力和精力,并进行了积极有效的应对措施。

然而,真正的解决问题始终需要源头上的改进。

因此,我对自身的不足之处表示认识,并承诺采取以下措施来改善产品质量:一、加强质量管控体系建设我们将建立完善的质量管控体系,确保产品设计、生产、检测等各个环节都能符合国际标准和企业要求。

同时,加强对员工的培训和指导,提高员工的质量意识和技能,减少产品质量问题的发生。

二、完善质量检测流程我们将对质量检测流程进行全面的评估和优化,确保每一个关键环节和指标能被准确评估和把控。

同时,我们将引入新的检测设备和技术手段,提高质量检测的准确性和精确度。

三、加强供应商管理我们将加强对供应商的选择和管理,建立和供应商的长期合作关系,并通过与供应商的共同努力改进原材料的质量,确保产品的稳定供应和高质量。

四、加强售后服务产品质量问题对客户的信任和公司声誉造成了严重的损害,我们将加强售后服务,对出现问题的产品进行及时修复和替换,并积极听取客户的意见和建议,改进和优化产品设计与生产。

五、建立质量风险预警机制我们将建立质量风险预警机制,定期进行质量评估和风险分析,及时发现和解决潜在的质量问题,确保产品质量的稳定和可靠。

产品质量问题的检讨书_检讨书

产品质量问题的检讨书_检讨书

产品质量问题的检讨书_检讨书英文回答:Product Quality Issue Debrief。

Reason Analysis。

Through the analysis of the recent product feedback, we found that the product's quality has declined. The main reasons for this are:Raw material issues: The quality of raw materials has failed to meet the required standards, which has led to defective products. To resolve the issue, we need to implement a stricter supplier assessment and qualitycontrol process.Production process issues: The production process has not been fully optimized, resulting in inconsistent product quality. Need to strengthen the production process,implement strict quality monitoring at each process, and improve production efficiency.Equipment failure: Equipment failures have led to the production of defective products. To avoid similar issues in the future, we need to conduct regular maintenance and ensure that all machines are operating optimally.Operator errors: Incorrect operations have also contributed to the production of defective products. We need to provide comprehensive training to our staff and improve the overall operating process.Design flaws: Some design flaws have also been identified. We need to conduct a thorough review of all products, identify and rectify any design issues.Improvement Measures。

产品缺陷处理的检讨书

产品缺陷处理的检讨书

产品缺陷处理的检讨书尊敬的用户:感谢您对我们产品的支持与信任。

在此,我们代表公司向您致以最诚挚的歉意,对于您在使用我们的产品时所遇到的问题,我们深感抱歉。

首先,我们要对产品缺陷给您带来的不便表示由衷的歉意。

我们十分重视用户的反馈和意见,您的反馈是我们不断进步的动力。

然而,我们也不可否认,我们在产品质量控制方面存在着一些问题,这给您带来了不必要的困扰和损失。

我们对产品缺陷进行了全面的检讨,发现了一些导致问题的原因。

首先,我们的生产线在某些环节上存在一些工艺不严谨的情况,这导致了一些产品在制造过程中出现了缺陷。

其次,我们的质检流程存在一定的疏漏,没有及时发现和解决这些问题。

最后,我们的售后服务团队在处理用户反馈时,没有给予足够的重视和及时的解决方案。

针对以上问题,我们已经采取了一系列的措施来改进我们的产品质量和服务。

首先,我们对生产线进行了全面的升级和改进,增加了一些严谨的工艺流程,以确保产品的质量。

其次,我们加强了质检流程,增加了一些检测环节,以及引入了一些先进的检测设备,以提高产品的质量控制水平。

最后,我们对售后服务团队进行了培训和提升,以提高他们的服务意识和解决问题的能力。

除此之外,我们也意识到,仅仅改进产品质量和服务还远远不够。

我们需要建立一个更加开放和透明的反馈机制,以便更好地听取用户的意见和建议,并及时进行改进。

同时,我们也会加强与供应商的沟通和合作,以确保原材料和配件的质量符合标准。

最后,我们再次向您表示最诚挚的歉意,并保证我们会以更加严谨的态度和更高的质量要求来生产和服务。

我们会努力改进我们的产品和服务,以满足用户的需求和期望。

同时,我们也真诚地希望您能够继续给予我们的支持和信任,让我们有机会为您提供更好的产品和服务。

再次感谢您对我们产品的支持和反馈,希望我们的努力能够得到您的认可和满意。

谢谢!此致敬礼。

产品检讨-English

产品检讨-English

产品检讨-English第一篇:产品检讨-English产品检讨1.和滑块干涉的倒勾请加料填平至滑块可以顺利滑动(The undercut area where interfere with slide block need to be filled material to help the slider can move smoothly.)2.加肉太多(The thickness is added too thick.)3.加肉面积太大(The thickening area is too wide.)4.GATE位置移位(Gate position is moved.)5.滑块拆的位置(The split line of slide block or the area of slide.)6.此处有尖角,填充困难(This area is hard to be filled due to the sharp feature.)7.此处钢材太薄,强度不足而且不容易冷却(The strength of this area is too weak and isn’t easy to get cold due to the steel to thin.)8.圆柱特征要有一半圆不可以拆在滑块上,以免粘滑块造成拉白,拉断(The semicircle of cylinder avoids designing on slide block lest it will be pulled apart or cause drag mark)9.此处做斜销在作动时会削到成品肉厚(The part will get damage if we make lifter in this area.)10.这个面是装配面,不能加料(This is critical surface where is not allow to add material.)11.此处料位太厚,会有缩水,建议减料改善(Owing to the shrinkage of the thickness that we suggest to reduce some wall thickness to improve it.)12.此面是不是外观面,此处做滑块的话会有夹线,是否可以接受(Please confirm whether it is critical surface or not.Pleaseconfirm whether it is acceptable to has Slide split line if we have slide in this area.)13.此处有倒勾,能否减料,使公母模靠破,不做滑块和斜销(Please confirm whether we can reduce material to the area where have undercut as indicated to have shut off on cavity side.No slide block and lifter to be made.)14.请尽快确认这种拆模方式和结构,否则会影响模期(Please confirm the issues of Parting line, Gate position...Etc otherwise the lead-time will be extended.)15.此面是否有特殊要求,能否有顶针印(Please confirm whether it is a critical surface or not and can we have E.J.pin mark on it.)16.P.L面开在此处,模具上会有尖角和刀口,对模具寿命有影响(There are sharp edges if set the parting line at here, It will reduce the tool life)17.加大拔模角,以便脱模顺利(We would suggest to enlarging draft to help tool released.)18.GATE做在此处的话有两个缺点:1.盖子打开时可以看到GATE 的修剪部位;2.两个斜销在同一侧,顶出也不是很平衡.(Two imperfect points if the gate is to be designed in this area as below:a).Easy to see the gate mark when you open the cap.b).Unbalance of ejector when two lifters are at the same side)19.GATE做在此处的话.盖子打开后看不到GATE的修剪部位(The gate mark is not visual if the gate position is design like it.)20.如果GATE一定要做在你们指定的位置的话,那还不如做在这一侧,这样的话还可以减小这个位置的缩水(If you insist that the gate position have to be as original design then we would further recommend to have it to the area where indicate as it can avoid shrink problem in this area.)21.在此处GATE做潜顶针的话,背后的外观面会有冲料痕,而且成品又是黑色的,会最明显(If the gate type has to be design as sub.gate then the back surface of part will have flow mark with serious due to black colour.)22.P.L开在此处不合理,模具加工困难,P.L应改为和图示的一样(This area is not suitable to have Parting line as the tool will become more complicate therefore we recommend to have Parting line as indicated.)23.此成品粘母模的机会很大,能否在公模加倒勾,拉料顶针或者公模保留E.D.M纹,开模时使成品留在公模一侧(It is possible sticking on cavity, therefore, please confirm whether it can make undercuts, snatch pins or leave coarseE.D.M.on core to snatch part on)24.此处料厚段差很大,成品表面会有应力痕,是否接受(Please confirm whether it is acceptable to has stress line on surface, it is cause to the thickness isn’t equally.)25.请注明何处为外观面,能否提供2D图和注意事项(Please advise where is the critical surface.Please also provide us 2D drawing with critical dimensions.)26.红色所示处是有问题的地方,请特别注意(Please pay more attention to the area where highlighted as red co lour as this area have problem.)27.成品设计此处有问题,建议如下图所示修改(We would suggest to have part design as attached as the current design have problem.)28.此处改为一个球形的凹槽(We would suggest to modify it asa globe recess.)29.圆柱特征要有一半不可以拆在滑块里,以防拉断(this issue same as no.8)30.此处大滑块上走小滑块,小滑块要先退,大滑块要做延迟(The inside small slide block will recede first and the parent slide block have to postpone sliding.)31.滑块要用液压油缸抽芯以保证开合模顺序(The slide pins will use oil cylinder to assure the process in proper order.)32.这个面有装配,加料的话装配时会顶住,如图所示(This surface can not add material where will intervene between two parts as it is assembly.Please see the sketch as attached.)33.可降低斜销面,增加成品些许肉厚来做变化(To descend the surface of lifter in order to thicken the part.)34.一半做斜销,一半做自然(Half side with Lifter and half side with solid / nature.)35.此处两个柱子重迭,有倒勾,不能做自然,要做SLIDE(These two bosses are overlapping with undercut therefore it can not be made as solid.We suggest to making it as slide block.)36.此处强迫顶出(This area need to be as force ejection.)37.公模两段开模,这个地方先退(Here will be fore receding as double ejection.)38.此处做镶件会有夹线,能否接受(Please confirm whether it is acceptable that here will have a split line.)39.此面公母模1度靠破,会有段差,可否接受(Please confirm whether it is ok to have mismatch to the area where have 1 degree of shut off in Core / Cavity side.)40.这个尺寸能否加大(Please confirm whether we can enlarge this dimension.)41.此处加一个凹槽,胶片的弹出效果会更好一些,试模后看装配的效果再做修正(It will be effect better elastic of film if it adds a recess.See how it is effect on assembly parts, and then make further decision.)42.此处有倒勾,建议将剖面线所示部位CUT即可避免此处的倒勾(Here has undercut, we suggest to cutting out the indicated part as it highlight to avoid undercut.)43.成型后SUB GATE要修平(The gate(sub gate)need to be trimmed evenly after moulded.)44.此处倒勾先垂直顶出,之后再手动取出(This area of undercut needs to be ejected as vertical then take it out manually.)45.这两个面都有滑块,GATE改在此处改不到(The gate is not suitable in this area as there is two slide blocks seal off this area.)46.此处加做一个旋转GATE,射出时方便调整成品的质量(We would suggest to placed a runner shut-off insert to adjust the volume of part filling.)47.此倒勾在滑块上强迫脱模,倒勾是否可以减小到0.6(This undercut will be force ejected out, Please confirm whether it can be reduced to 0.6 mm.)48.此柱子无法脱模,请确认是否是在转图时错位,能否提供客户的原始图档(This boss is not releasable.Please check file again and if possible pleas e-send us native data.)49.此柱子是实心的,会缩水(This boss will shrink due to it is solid boss.)50.这个面是否要咬花,咬花番号是什么,最小的拔模角要多大(Please confirm whether this surface need to be textured or not? Please advise texture spec.And what's the min.draft.)51.这个面是否要打光,贴标签(Please confirm whether this surface need to be polished and stuck on a sticker or not?)52.红色显示的几个面拔模角太小,出模时会拉伤,建议加大拔模角(The areas where highlighted as red colour have problem of small draft angle and we would suggest to enlarging draft to avoid the part cause dragging mark.)53.此RIB太薄,会填充不足This rib can not be filled properly due to too thin.54.此RIB太厚,会缩水This rib will have shrink problem due to too thick.55.此处倒勾出模困难,建议先不做倒勾,成型后再二次加工,但要做治具,费用要另外算(We would recommend doing this undercut as second operation as current design have problem to build a tool.And the jig cost will be occurred.)56.柱子底部都要做火山口(The base of all bosses are required a crater to avoid shrinkage.)57.XXX,你现在有空吗?我可以问你一些问题吗?Could I ask you some questions if you are free ?/ Are you free now ?May I ask you same questions(a question)?58.请问次产品的面是否为外观面?表面做什么处理?是晒纹/抛光?Can you tell me weather the surface of this part is a visible / esthetic one ? What will we do for its surface? Texture or polishing ?59.请问产品这个面是否可加顶针或顶块?产品允许加扁顶针吗?Does this part need an ejector pin or an ejector bar? Can we add an ejector blade?60.这个产品的柱位我们打算做司筒或镶针,可以吗?Can we add ejector sleeves or ejector pins in the boss of this part.61.产品的这个位置不能出模,我们打算做行位,在此面上会有分模线,你接受吗?There’s an undercut at this position and it needs a slider.It will also have a parting line on this side, is that OK?产品里面的这个位置我打算做斜顶或内行位,有问题吗?We will make the lifter and(inner)slider in the position, will that be a problem?你提供的2D产品图与3D产品图不一致,请问以哪个图为准?The 2D and 3D drawing you provided is not the same , can you tell me which one is correct ?你提供的3D产品图有的地方没有出模角,有的地方胶位太厚,有的地方胶位太薄,这些产品我们可以自己修改吗?修改后会交给你确认。

2024年产品问题道歉信英文(19篇)

2024年产品问题道歉信英文(19篇)

2024年产品问题道歉信英文(19篇)We would like to take this opportunity to extend our sincerest apologies for the recent issues with our products in 2024. We understand that there have been several instances where our products have fallen short of the high standards that we strive to maintain.We deeply regret any inconvenience or disappointment that these issues may have caused. We want to assure you that we are taking immediate steps to rectify the situation and prevent any such problems from occurring in the future.We are committed to providing products of the highest quality, and we are working tirelessly to address the issues that have arisen. Our customers' satisfaction is of utmost importance to us, and we are determined to regain your trust in our brand.We appreciate your continued support and understanding as we work to resolve these issues. Please do not hesitate to reach out to our customer service team if you have been affected by any product issues, and we will do our best to assist you.Thank you for your understanding and patience.Sincerely,[Your Name][Your Title][Company Name]As we continue to address the recent issues with our products, we want to provide you with a detailed overview of the steps we are taking to ensure that our products meet the high standards that you expect and deserve. We understand that regaining your trust is crucial, and we are committed to being transparent about the actions we are taking to rectify the situation.First and foremost, we have taken a close look at our quality control processes. We recognize that there have been lapses in ensuring that our products meet our stringent quality standards. As a result, we have implemented a comprehensive review of our quality control procedures, from the sourcing of raw materials to the manufacturing and distribution of the final products. We are working closely with our production teams to reinforce the importance of consistent quality checks and stringent adherence to our quality standards at every stage of the production process.In addition to enhancing our internal quality control processes, we are also conducting a thorough evaluation of our suppliers and partners. We understand that the integrity of our products begins with the raw materials and components that we source. As such, we are working diligently to ensure that our suppliers share our commitment to quality and reliability. We are strengthening our relationships with trusted suppliers and reevaluating our partnerships to ensure that they align with our high standards.Furthermore, we are investing in advanced testing and inspection technologies to further enhance our quality control capabilities. By introducing state-of-the-art testing equipment and methodologies, we aim to detect and address any potential issues with our products before they reach our customers. This proactive approach to quality assurance will play a crucial role in preventing any future issues and upholding the excellence that you expect from our products.Aside from focusing on the technical aspects of quality control, we are also prioritizing the training and education of our employees. We believe that a strong commitment to quality must be ingrained in every member of our team. As such, we are providing comprehensive training programs to ensure that all our employees are equipped with the knowledge and skills necessary to maintain our high standards of quality. By fostering a culture of excellence and accountability, we are confident that our team will play a pivotal role in delivering products that consistently meet your expectations.Furthermore, we understand that clear and effective communication with our customers is essential during this time. We are implementing enhanced customer feedback mechanisms to gather valuable insights and address any concerns promptly. Your feedback is invaluable to us, and we are committed to listening to your experiences and incorporating your input into our continuous improvement efforts.Internally, we are also establishing a dedicated task force that is solely focused on quality improvement. This task force comprises experts from various relevant departments, including production, quality control, logistics, and customer service. By harnessing the collective expertise of these individuals, we are confident that we can drive meaningful and sustainable enhancements across our entire product line.It is important for us to emphasize that our commitment to quality is unwavering, and we are fully dedicated to earning back your trust. We recognize the impact that the recent product issues may have had on you, our valued customers, and it is our priority to ensure that such issues do not reoccur.Looking ahead, we are confident that our renewed focus on quality control, supplier relationships, employee training, and customer feedback will pave the way for a stronger and more reliable product offering. We are deeply committed to upholding the reputation of our brand and delivering products that you can trust and depend on.We want to thank you for your continued support and understanding during this crucial time. Your loyalty as our customers means the world to us, and we are committed to delivering on our promise of quality and excellence.Please do not hesitate to reach out to our customer service team if you have any further questions or concerns. We are here to listen, assist, and ensure that your experience with our products is nothing short of exceptional.Thank you for your patience and trust in us as we work towards a brighter and more reliable future for our products.Sincerely,[Your Name] [Your Title] [Company Name]。

塑胶零件DFM检讨报告(适用于国外大企业项目)-英文版

塑胶零件DFM检讨报告(适用于国外大企业项目)-英文版

Name:
OK / NOK comments
check by supplier
OK/NOK
File name
Date (yyyymmdd)
date 10
E2: proposed Mold layout & injection machine
Proposal agreed by
mold engineer
12
E4: Conclusion about current wall thickness design
Proposal agreed by
mold engineer
product designer (MDD)
Proposal properly implemented or not
Name:
OK / NOK Comments
Proposal agreed by
mold engineer
product designer (MDD)
Proposal properly implemented or not
Name:
OK / NOK comments
check by supplier
OK/NOK
File name
Date (yyyymmdd) date
(sequence of surfaces released, surface finish ,parting lines, undercuts & ejecting, )
4: solution of mold close hasn’t been agreed by NPI mold ENG.
(weak steel)
Project name, part name

使用违规电器英语检讨书

使用违规电器英语检讨书

Dear [Supervisor's Name],I am writing to express my sincere apologies and to offer a thoroughself-reflection regarding the incident where I was found using unauthorized electrical appliances in the workplace. This letter serves as a formal apology, an explanation of the circumstances, and a commitment to rectifying the situation and ensuring that such an occurrence does not happen again.First and foremost, I would like to extend my deepest apologies to you, [Supervisor's Name], for any inconvenience or disruption this may have caused to the workplace and to my colleagues. I recognize that the use of unauthorized appliances can pose serious safety risks, and I am truly remorseful for not adhering to the company’s policies and procedures.Incident Details:The incident in question occurred on [Date], when I was observed using a [describe the appliance] in the [location where the appliance was used]. Although I had initially intended to use the appliance for [briefly explain the purpose of the appliance], I now understand that my actions were in direct violation of the company’s strict guidelines regarding the use of electrical equipment.Reasons for the Misconduct:Reflecting on the incident, I have identified several factors that contributed to my misconduct:1. Lack of Awareness: At the time of the incident, I was not fully aware of the company’s policies regarding the use of unauthorized electrical appliances. I had assumed that as long as the appliance was not a major fire hazard, it would be permissible to use it.2. Convenience: I was facing a challenging workload and sought to find ways to make my tasks more efficient. The appliance seemed like a quick solution to speed up my work, and I did not consider the potential consequences.3. Overconfidence: I had used similar appliances in the past without incident and, in my overconfidence, believed that the same would apply in this situation.Impact of the Incident:I understand that the use of unauthorized appliances can have serious consequences, including but not limited to:- Safety Risks: The appliance could have been a fire hazard or could have caused electrical shocks, posing a risk to my colleagues and myself.- Legal and Financial Consequences: The company could face legal action if an accident occurred due to the use of unauthorized equipment.- Trust and Team Dynamics: My actions may have damaged the trust that my colleagues and management have in me, and could have negatively impacted team dynamics.Steps Taken to Rectify the Situation:To address the incident and prevent future occurrences, I have taken the following steps:1. Immediate Discontinuation: I immediately ceased using the unauthorized appliance upon being informed of the violation.2. Review of Policies: I have thoroughly reviewed the c ompany’spolicies regarding the use of electrical appliances and understand the importance of adhering to them.3. Training and Education: I have volunteered to participate in any additional training sessions or workshops that the company may offer on safety and compliance.4. Reporting: I have reported the incident to the appropriateauthorities within the company to ensure that the necessary precautions are taken.Commitment to Change:Moving forward, I am committed to the following actions:- Strict Adherence to Policies: I will strictly adhere to all company policies, particularly those related to the use of electrical appliances.- Open Communication: I will communicate any concerns or questions regarding workplace policies to my supervisor or the appropriate department before taking any action.- Role Modeling: I will serve as a role model for my colleagues by consistently demonstrating compliance with company policies and a strong commitment to safety.- Continuous Improvement: I will actively seek ways to improve my understanding of workplace safety and compliance to ensure that I am always prepared to make the right decisions.Conclusion:In conclusion, I am truly sorry for the oversight and the consequences that resulted from my actions. I am committed to learning from this experience and to taking the necessary steps to prevent any future violations. I hope that you will consider this letter as a sincere apology and a commitment to change.Thank you for your time and understanding. I am open to any further discussions or actions that you may deem necessary to ensure that this incident does not recur.Sincerely,[Your Full Name][Your Position][Your Department][Your Contact Information]。

产品质量问题道歉信英文

产品质量问题道歉信英文

竭诚为您提供优质文档/双击可除产品质量问题道歉信英文篇一:英文致歉信_范文道歉信LetterofApology我们在工作或生活中,有时难免会犯一些错误,写封致歉信就显得很有必要。

道歉信通常包括以下内容:表示歉意;道歉的原由;出现差错的原因;提出弥补措施;请求原谅。

写道歉信的语言要诚挚,解释的理由要真实,不要显出丝毫的虚情假意。

好的道歉信不仅会取得对方的谅解,还会增进彼此的感情。

写作"三步走":表示歉意->说明具体原因、提出补救办法->再次致歉、希望得到理解Tips:在写作过程中,尽可能提供比较合理的理由。

如果违反生活常识将导致扣分。

在解释完原因后,尽量提供一个合适的补救办法,使行文更加完满。

订阅收藏《考研英语写作范文100篇》系列文章(1)Directions:Youareinvitedtoadinneratafriendshouse,butyouarenota bletoattendbecauseofthepreparationforacomingexamina tion.writealettertoyourfriendstoexpressyourapology, explainyourreason,andsuggestameetingatanothertime.Youshouldwriteabout100wordsonAnsweRsheeT2.e"Liming" instead.Donotwritetheaddress.范文:DearAnne,Thankyouforyourinvitationtodinneratyourhometomorrow evening.unfortunately,itismuchtomyregretthatIcannot joinyouandyourfamily,becauseIwillbefullyoccupiedthe nforanimportantexamcomingthedayaftertomorrow.Ifeelt erriblysorryformissingthechanceofsuchahappyget-together,andIhopethatallofyouenjoyagoodtime.Isitpossibl eforyouandmetohaveaprivatemeetingafterward?Ifso,ple asedonthesitatetodropmealineaboutyourpreferabledate.Idolongforapleasantchatwithyou.pleaseallowmetosaysorryagain.Regards,Liming译文:亲爱的安:感谢你邀请我于明日晚上与你和你的家人共进午餐。

产品质量问题道歉信英文

产品质量问题道歉信英文

竭诚为您提供优质文档/双击可除产品质量问题道歉信英文篇一:英文致歉信_范文道歉信LetterofApology我们在工作或生活中,有时难免会犯一些错误,写封致歉信就显得很有必要。

道歉信通常包括以下内容:表示歉意;道歉的原由;出现差错的原因;提出弥补措施;请求原谅。

写道歉信的语言要诚挚,解释的理由要真实,不要显出丝毫的虚情假意。

好的道歉信不仅会取得对方的谅解,还会增进彼此的感情。

写作"三步走":表示歉意->说明具体原因、提出补救办法->再次致歉、希望得到理解Tips:在写作过程中,尽可能提供比较合理的理由。

如果违反生活常识将导致扣分。

在解释完原因后,尽量提供一个合适的补救办法,使行文更加完满。

订阅收藏《考研英语写作范文100篇》系列文章(1)Directions:Youareinvitedtoadinneratafriendshouse,butyouarenota bletoattendbecauseofthepreparationforacomingexamina tion.writealettertoyourfriendstoexpressyourapology, explainyourreason,andsuggestameetingatanothertime.Youshouldwriteabout100wordsonAnsweRsheeT2.e"Liming" instead.Donotwritetheaddress.范文:DearAnne,Thankyouforyourinvitationtodinneratyourhometomorrow evening.unfortunately,itismuchtomyregretthatIcannot joinyouandyourfamily,becauseIwillbefullyoccupiedthe nforanimportantexamcomingthedayaftertomorrow.Ifeelt erriblysorryformissingthechanceofsuchahappyget-together,andIhopethatallofyouenjoyagoodtime.Isitpossibl eforyouandmetohaveaprivatemeetingafterward?Ifso,ple asedonthesitatetodropmealineaboutyourpreferabledate.Idolongforapleasantchatwithyou.pleaseallowmetosaysorryagain.Regards,Liming译文:亲爱的安:感谢你邀请我于明日晚上与你和你的家人共进午餐。

产品英文出错检讨书范文

产品英文出错检讨书范文

Dear [Supervisor's Name],I am writing this self-criticism to express my sincere apologies for the English errors found in the recent product launch. As the [Your Position] in [Your Department], I am responsible for the quality control of the product's documentation and communication materials. The errors have caused inconvenience and confusion to our customers, and I take full responsibility for this oversight.Introduction------------The product launch was a significant event for our company, and I am deeply regretful that the errors in the English language compromised the professionalism and credibility of our brand. I understand that such mistakes can undermine customer trust and negatively impact our reputation. Therefore, I have taken the following steps to analyze the cause of the errors, rectify the situation, and prevent future occurrences.Analysis of Errors------------------1. Spelling MistakesThe most prevalent errors were spelling mistakes, particularly inproduct names and technical specifications. These errors were not only distracting but also raised questions about the attention to detail in our product development process.2. Grammatical ErrorsSeveral sentences contained grammatical errors that made the text sound unprofessional. These errors included incorrect verb tenses, misplaced modifiers, and incorrect use of punctuation.3. Inconsistent TerminologyThere were instances where the same term was used in different contexts with varying meanings, leading to confusion for the readers.4. Cultural MisunderstandingsSome phrases were translated directly from the original language without considering cultural nuances, resulting in insensitive and inappropriate statements.Cause of Errors---------------1. Rushed Review ProcessThe pressure to meet the launch deadline led to a rushed review process, where errors were not adequately caught.2. Inadequate TrainingThe team responsible for the English documentation lacked comprehensive training on technical writing and language standards.3. Lack of ProofreadingWhile proofreading was conducted, it was not thorough enough, and some errors were overlooked.4. Dependence on Machine TranslationIn some cases, machine translation was used without proper human review, leading to errors that were not detectable by the machine.Rectification Measures----------------------1. Immediate CorrectionI have taken immediate action to correct all the errors found in the product documentation and ensure that the revised versions are distributed to all customers.2. Enhanced Review ProcessI have implemented a more rigorous review process, including multiple layers of proofreading and quality checks, to prevent future errors.3. Training and DevelopmentI have arranged for additional training sessions for the team on technical writing, English grammar, and cultural sensitivity. This will help improve the quality of our documentation.4. Quality Control StandardsI have updated our quality control standards to include a dedicated section on language quality, ensuring that all documentation meets our high standards.5. Customer CommunicationI have personally reached out to affected customers to apologize for the inconvenience and to assure them of our commitment to providing accurate and professional information.Conclusion----------I am truly sorry for the errors that have occurred and the impact they have had on our customers. I understand that mistakes are human, but it is my responsibility to ensure that they do not happen in the future. I am committed to learning from this experience and to continuously improving our processes and standards.I appreciate your understanding and support as we address this issue. Please let me know if there is any further action you would like me to take or any additional information you require.Sincerely,[Your Full Name][Your Position][Your Department] [Your Company Name] [Date]。

模具检讨用英语(升级版)

模具检讨用英语(升级版)

模具检讨用英语(升级版)第一篇:模具检讨用英语(升级版)模具检讨用E文(升级版)1. XXX!你现在有空吗,我可以问你一些问题吗?Could I ask you some questions if you are free?/ Are you free now? May I ask you some questions(a question)?2.请问此产品的面是否为外观面?表面做什么处理?是晒纹/抛光?Can you tell me whether the surface of this part is a visible/esthetic one? What will we do for its surface? T exture or Polishing?3.请问产品这个面可否加顶针或顶块?产品允许加扁顶针吗?Does this part need an ejector pin or an ejector bar? Can we add an ejector blade?4.这个产品的柱位我们打算做司筒。

(或镶针)可以吗?Can we add ejector sleeves or ejector pins in the boss of this part?5.产品的这个位置不能出模,我们打算做行位,在此面上会有分模线,你接受吗?There's an undercut at this position and it needs a slider.It will also have a parting line on this side, is that OK?6.产品里面的这个位置我们打算做斜顶或内行位,有问题吗?We will make the lifter and(inner)slider in this position, will that be a problem?7.你提供的2D产品图与3D产品图不一致,请问以哪一个图面为准?The 2D and 3D drawing you provided is not the same, can you tell me which one is correct?8.你提供的3D产品图有的地方没有出模角,有的地方胶位太厚,有的地方胶位太溥,这些产品问题我们可以自己修改吗?修改后会给交给你确认。

质量问题道歉信英文

质量问题道歉信英文

质量问题道歉信英文Dearcustomerfriend:Inthenumerousdayandnightredpillars,inordertorepairthemachine ,,understandwhatresponsibility,friendshipandcooperation!BrotherX u,alsobecauseofyouthequalityproblemandhatemeIbelieveyourbrotherX u,nowintheprocessofsolvingthequalityproblemhasbeenwell,ifso,Imre lieved.Thepastistheprologue.Xuelderbrother,businessisabusiness,keepintouch!Apology:XXX20XX.XX.XX产品质量问题道歉信产品质量问题道歉信(1)***先生:你好!对本次产品存在的质量问题,我首先以我个人的名义向你致以最诚挚的歉意,如果还有机会的话,也非常希望你再给我机会,我们一定保证以后提供的产品绝不会再有类似的情况发生,并郑重立下此承诺。

本次产品的质量问题,按我本人的意见,在你们交货时间允许的情况下,我本人是想全数退货再换货,但你还是考虑到不让我方损失太大,而采用全检的方式特例收下这批货,我心里十分的感激,同时仍让我心存愧疚。

针对本次质量方面存在的问题,我们从全方位反思过,逐一与加工商进行协商,最终采取如下措施和方法,以杜绝类似情况再发生!其它方面希望***先生能再提宝贵意见,对我方存在的不足,请及时指正,我方愿全力合作,争取最大程度的满足客户的要求,达到双赢,也让我方提高更快。

谢谢!产品质量问题道歉信(2)尊敬的消费者朋友:我是伊利公司销售经理XX,下面我将针对三聚氰胺事件向您致以最深切诚恳的歉意。

由于我公司产品质量问题给您带来的健康方面的不幸我们深感遗憾,并将在此对您做出相应补偿。

产品质量问题道歉信英文

产品质量问题道歉信英文

竭诚为您提供优质文档/双击可除产品质量问题道歉信英文篇一:英文致歉信_范文道歉信LetterofApology我们在工作或生活中,有时难免会犯一些错误,写封致歉信就显得很有必要。

道歉信通常包括以下内容:表示歉意;道歉的原由;出现差错的原因;提出弥补措施;请求原谅。

写道歉信的语言要诚挚,解释的理由要真实,不要显出丝毫的虚情假意。

好的道歉信不仅会取得对方的谅解,还会增进彼此的感情。

写作"三步走":表示歉意->说明具体原因、提出补救办法->再次致歉、希望得到理解Tips:在写作过程中,尽可能提供比较合理的理由。

如果违反生活常识将导致扣分。

在解释完原因后,尽量提供一个合适的补救办法,使行文更加完满。

订阅收藏《考研英语写作范文100篇》系列文章(1)Directions:Youareinvitedtoadinneratafriendshouse,butyouarenota bletoattendbecauseofthepreparationforacomingexamina tion.writealettertoyourfriendstoexpressyourapology, explainyourreason,andsuggestameetingatanothertime.Youshouldwriteabout100wordsonAnsweRsheeT2.e"Liming" instead.Donotwritetheaddress.范文:DearAnne,Thankyouforyourinvitationtodinneratyourhometomorrow evening.unfortunately,itismuchtomyregretthatIcannot joinyouandyourfamily,becauseIwillbefullyoccupiedthe nforanimportantexamcomingthedayaftertomorrow.Ifeelt erriblysorryformissingthechanceofsuchahappyget-together,andIhopethatallofyouenjoyagoodtime.Isitpossibl eforyouandmetohaveaprivatemeetingafterward?Ifso,ple asedonthesitatetodropmealineaboutyourpreferabledate.Idolongforapleasantchatwithyou.pleaseallowmetosaysorryagain.Regards,Liming译文:亲爱的安:感谢你邀请我于明日晚上与你和你的家人共进午餐。

  1. 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
  2. 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
  3. 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。

产品检讨1. 和滑块干涉的倒勾请加料填平至滑块可以顺利滑动(The undercut area where interfere with slide block need to be filled material to help the slider can move smoothly.)2. 加肉太多(The thickness is added too thick.)3. 加肉面积太大(The thickening area is too wide.)4. GATE位置移位(Gate position is moved.)5. 滑块拆的位置(The split line of slide block or the area of slide.)6. 此处有尖角,填充困难(This area is hard to be filled due to the sharp feature.)7. 此处钢材太薄,强度不足而且不容易冷却(The strength of this area is too weak and isn’t easy to get cold due to t he steel to thin.) 8. 圆柱特征要有一半圆不可以拆在滑块上,以免粘滑块造成拉白,拉断(The semicircle of cylinder avoids designing on slide block lest it will be pulled apart or cause drag mark)9. 此处做斜销在作动时会削到成品肉厚(The part will get damage if we make lifter in this area.)10. 这个面是装配面,不能加料(This is critical surface where is not allow to add material.)11. 此处料位太厚,会有缩水,建议减料改善(Owing to the shrinkage of the thickness that we suggest to reduce some wall thickness to improve it.)12. 此面是不是外观面,此处做滑块的话会有夹线,是否可以接受(Please confirm whether it is critical surface or not. Please confirm whether it is acceptable to has Slide split line if we have slide in this area. )13. 此处有倒勾,能否减料,使公母模靠破,不做滑块和斜销(Please confirm whether we can reduce material to the area where have undercut as indicated to have shut off on cavity side. No slide block and lifter to be made. )14. 请尽快确认这种拆模方式和结构,否则会影响模期(Please confirm the issues of Parting line, Gate position...Etc otherwise the lead-time will be extended.)15. 此面是否有特殊要求,能否有顶针印(Please confirm whether it is a critical surface or not and can we have E.J. pin mark on it.)16. P.L面开在此处,模具上会有尖角和刀口,对模具寿命有影响(There are sharp edges if set the parting line at here, It will reduce the tool life)17. 加大拔模角,以便脱模顺利(We would suggest to enlarging draft to help tool released.)18. GATE做在此处的话有两个缺点:1.盖子打开时可以看到GATE的修剪部位; 2.两个斜销在同一侧,顶出也不是很平衡.(Two imperfect points if the gate is to be designed in this area as below:a). Easy to see the gate mark when you open the cap.b). Unbalance of ejector when two lifters are at the same side)19. GATE做在此处的话.盖子打开后看不到GATE的修剪部位(The gate mark is not visual if the gate position is design like it.)20. 如果GATE一定要做在你们指定的位置的话,那还不如做在这一侧,这样的话还可以减小这个位置的缩水(If you insist that the gate position have to be as original design then we would further recommend to have it to the area where indicate as it can avoid shrink problem in this area.)21. 在此处GATE做潜顶针的话,背后的外观面会有冲料痕,而且成品又是黑色的,会最明显(If the gate type has to be design as sub. gate then the back surface of part will have flow mark with serious due to black colour.)22. P.L开在此处不合理,模具加工困难,P.L应改为和图示的一样(This area is not suitable to have Parting line as the tool will become more complicate therefore we recommend to have Parting line as indicated.)23. 此成品粘母模的机会很大,能否在公模加倒勾,拉料顶针或者公模保留E.D.M纹,开模时使成品留在公模一侧(It is possible sticking on cavity, therefore, please confirm whether it can make undercuts, snatch pins or leave coarse E.D.M. on core to snatch part on)24. 此处料厚段差很大,成品表面会有应力痕,是否接受(Please confirm whether it is acceptable to has stress line on surface, it is cause to the thickness isn’t equally.)25. 请注明何处为外观面,能否提供2D图和注意事项(Please advise where is the critical surface. Please also provide us 2D drawing with critical dimensions. )26. 红色所示处是有问题的地方,请特别注意(Please pay more attention to the area where highlighted as red co lour as this area have problem.)27. 成品设计此处有问题,建议如下图所示修改(We would suggest to have part design as attached as the current design have problem.)28. 此处改为一个球形的凹槽(We would suggest to modify it as a globe recess.)29. 圆柱特征要有一半不可以拆在滑块里,以防拉断(this issue same as no.8)30. 此处大滑块上走小滑块,小滑块要先退,大滑块要做延迟(The inside small slide block will recede first and the parent slide block have to postpone sliding.)31. 滑块要用液压油缸抽芯以保证开合模顺序(The slide pins will use oil cylinder to assure the process in proper order.)32. 这个面有装配,加料的话装配时会顶住,如图所示(This surface can not add material where will intervene between two parts as it is assembly. Please see the sketch as attached. )33. 可降低斜销面,增加成品些许肉厚来做变化(To descend the surface of lifter in order to thicken the part.)34. 一半做斜销,一半做自然(Half side with Lifter and half side with solid / nature.)35. 此处两个柱子重迭,有倒勾,不能做自然,要做SLIDE(These two bosses are overlapping with undercut therefore it can not be made as solid. We suggest to making it as slide block.)36. 此处强迫顶出(This area need to be as force ejection.)37. 公模两段开模,这个地方先退(Here will be fore receding as double ejection.)38. 此处做镶件会有夹线,能否接受(Please confirm whether it is acceptable that here will have a split line.)39. 此面公母模1度靠破,会有段差,可否接受(Please confirm whether it is ok to have mismatch to the area where have 1 degree of shut off in Core / Cavity side.)40. 这个尺寸能否加大(Please confirm whether we can enlarge this dimension.)41. 此处加一个凹槽,胶片的弹出效果会更好一些,试模后看装配的效果再做修正(It will be effect better elastic of film if it adds a recess. See how it is effect on assembly parts, and then make further decision.)42. 此处有倒勾,建议将剖面线所示部位CUT即可避免此处的倒勾(Here has undercut, we suggest to cutting out the indicated part as it highlight to avoid undercut.)43. 成型后SUB GATE要修平(The gate (sub gate) need to be trimmed evenly after moulded.)44. 此处倒勾先垂直顶出,之后再手动取出(This area of undercut needs to be ejected as vertical then take it out manually.)45. 这两个面都有滑块,GATE改在此处改不到(The gate is not suitable in this area as there is two slide blocks seal off this area.)46. 此处加做一个旋转GATE,射出时方便调整成品的质量(We would suggest to placed a runner shut-off insert to adjust the volume of part filling.)47. 此倒勾在滑块上强迫脱模,倒勾是否可以减小到0.6(This undercut will be force ejected out, Please confirm whether it can be reduced to 0.6 mm.)48. 此柱子无法脱模,请确认是否是在转图时错位,能否提供客户的原始图档(This boss is not releasable. Please check file again and if possible pleas e-send us native data. )49. 此柱子是实心的,会缩水(This boss will shrink due to it is solid boss.)50. 这个面是否要咬花,咬花番号是什么,最小的拔模角要多大(Please confirm whether this surface need to be textured or not? Please advise texture spec. And what's the min. draft. )51. 这个面是否要打光,贴标签(Please confirm whether this surface need to be polished and stuck on a sticker or not?)52. 红色显示的几个面拔模角太小,出模时会拉伤,建议加大拔模角(The areas where highlighted as red colour have problem of small draft angle and we would suggest to enlarging draft to avoid the part cause dragging mark.)53. 此RIB太薄,会填充不足This rib can not be filled properly due to too thin.54. 此RIB太厚,会缩水This rib will have shrink problem due to too thick.55. 此处倒勾出模困难,建议先不做倒勾,成型后再二次加工,但要做治具,费用要另外算(We would recommend doing this undercut as second operation as current design have problem to build a tool. And the jig cost will be occurred. )56. 柱子底部都要做火山口(The base of all bosses are required a crater to avoid shrinkage.)57. XXX,你现在有空吗?我可以问你一些问题吗?Could I ask you some questions if you are free ?/ Are you free now ?May I ask you same questions ( a question)?58.请问次产品的面是否为外观面?表面做什么处理?是晒纹/抛光?Can you tell me weather the surface of this part is a visible / esthetic one ? What will we do for its surface? Texture or polishing ?59.请问产品这个面是否可加顶针或顶块?产品允许加扁顶针吗?Does this part need an ejector pin or an ejector bar? Can we add an ejector blade?60. 这个产品的柱位我们打算做司筒或镶针,可以吗?Can we add ejector sleeves or ejector pins in the boss of this part.61.产品的这个位置不能出模,我们打算做行位,在此面上会有分模线,你接受吗?There’s an undercut at this position and it needs a slider. It will also have a parting line on this side, is that OK?62 产品里面的这个位置我打算做斜顶或内行位,有问题吗?We will make the lifter and (inner) slider in the position, will that be a problem?63 你提供的2D产品图与3D产品图不一致,请问以哪个图为准?The 2D and 3D drawing you provided is not the same , can you tell me which one is correct ?64 你提供的3D产品图有的地方没有出模角,有的地方胶位太厚,有的地方胶位太薄,这些产品我们可以自己修改吗?修改后会交给你确认。

相关文档
最新文档