聚能水压光面爆破技术在Ⅲ,Ⅳ级围岩下的应用与研究
合集下载
- 1、下载文档前请自行甄别文档内容的完整性,平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益,请联系客服反馈,我们会尽快为您处理(人工客服工作时间:9:00-18:30)。
Jia Wen-long
[Abstract ] In the process of tunnel blasting, there are strict requirements for blasting technology. There are big differences in blasting schemes for different surrounding rock grades, and traditional blasting has always had problems such as over-under-excavation and poor blasting effect. A new type of blasting technology is applied under different grades of surrounding rock. Taking the construction of Zhangjihuai Railway Guantian Tunnel Project as an example, the condensing technology of condensing water pressure surface blasting was proposed, and the following research results were obtained. (1) The related blasting materials and tools were introduced, and the design principles of blasting parameters were analyzed. The corresponding parameter design theory formula. (2) The blasting parameters of the surrounding rock of Class III and IV were optimized, the layout of the blasthole was listed, and the detonation network was optimized. (3) List the detailed blasting parameters, and calculate the single-level consumption of the III and IV surrounding rocks, and verify the rationality and effectiveness of the technology.
黄福波结合内昆铁路圾口隧道的施工,论述隧道围岩条 件对炮眼深度的影响因素,通过对不同类别围岩每一掘进循 环中各工序时间的统计分析,提出了在不同围岩情况下,隧 道施工的合理循环进度。沈显才在工程中应用水压光面破技 术,获得了良好的效果,减少了对围岩的扰动。张建刚等通 过研究改进传统爆破模式,从多方面因素进行综合对比分析, 验证了聚能控制爆破技术的可行性和优越性。魏晨慧通过模 拟双孔爆破的过程,研究节理角度和地应力对爆破的影响, 得出了使得裂纹扩展最优角度,探索了原岩应力对爆破作用 中裂纹的拓展的作用。王军通过介绍聚能水压光面爆破技术 的基本原理和工艺,结合在蒙华铁路曙山隧道开挖掘进中的 实际应用和对比试验分析,验证了聚能水压光面爆破技术的 优越性。戴俊研究了光面孔爆炸冲击压力的衰减,得出光面 爆破参数设计的新方法,并分析了堵塞炮孔的作用。周亦玲
收稿日期:2019-08-27 作者简介:贾文龙(1976-),男,山东肥城人,高级工程师,主要研究
[Keywords ] shaped ; water pressure ; smooth blasting ; tunnel ; different surrounding rocks
随着我国经济和社会的发展,隧道工程发展进入了一个 新的时期,特别是高等级公路隧道建设更是日新月异。目前, 在隧道的开挖掘进工程中钻爆法是主要的手段。
一直存在着超欠挖、爆破效果差等问题,因此,亟需一种不同等级围岩下新型的爆破技术应用。以张吉怀铁路官田隧道项目施
工为例,提出了聚能水压光面爆破技术,主要得到以下研究成果。(1)介绍了相关爆破材料机具,并对分析了爆破参数设计原理,
列出了相应参数设计理论公式。(2)对现场施工m、iv级围岩爆破参数进行了优化设计,列出了炮孔布置图,并对起爆网络进
第46卷第20期
2019年10月
工程技术
Engineering and Technology
建筑技术开发
Building Technology Development
聚能水压光面爆破技术在皿,IV级围岩下
的应用与研究
贾文龙
(中铁十四局集团第四工程有限公司,济南250000 )
[摘 要]在隧道爆破掘进过程中,对爆破技术有着严格的要求,不同围岩等级爆破方案存在着较大的差异,并且传统爆破
与机械开挖掘进法相比,钻爆法具有经济效益好、适应 能力强、开挖成本低等诸多优点。传统隧道爆破易产生较大 的超欠挖,并对围岩产生扰动,形成安全隐患,因此,在隧 道掘进爆破中结合水压爆破和光面爆破技术,提出了聚能水 压光面爆破技术,该技术通过选择合理爆破参数及爆破器材, 分段微差爆破,以期爆破后轮廓线光滑平整,提高经济效益, 减少对围岩的扰动。
Байду номын сангаас
行了优化设计。(3)列出详细的爆破参数,并计算出III、IV级围岩单耗量,验证了该技术的合理性与有效性。
[关键词]聚能;水压;光面爆破;隧道;不同围岩
[中图分类号]TU94
[文献标志码]A
[文章编号]1001-523X (2019) 20_0114-02
Application and Research of Shaped Water .Pressure Glazing Blasting Technology in Class III and IV Surrounding Rocks