广柴8320船用柴油机供货技术条件详解

CONTENTS
1In General
2Specifications and Main Technical Parameters
3Technical Conditions and Notes
4Delivery Scope
5Packing
6Factory Warranty
1In General
1.1 This delivery conditions specify the main specifications, technical conditions, delivery scope,
packing, factory warranty, spare parts, etc. for the 8320ZCd-8 diesel engine.
1.2 When ex-factory, the engines shall be in accordance with the technical requirements stipulated
in this delivery conditions.
1.3 For the details of the fitting data and the ex-factory test records, see the Technical Certificate. 1.4 For the particular requirements from users, such as to take out the output power from the front
parameters in conformity with the requirements in this delivery technical conditions and the quality of all parts and components is in conformity with the regulations of the drawings and technical requirements of assembly.
6.2 Before delivery, the engine is conditioned, oil-sealed and packed in a good condition. The
guarantee period of oil seal is 12 months from the delivery date provided that the users transport and store the engine according to the Operation and Maintenance Manual for Model 8320 Diesel Engine. Guangzhou Diesel Engine Factory will be responsible for repairing and replace the rust-eaten parts due to the incorrect oil seal in the guarantee period of oil seal.
6.3 The damaged parts and / or components due to the poor manufacturing and assembly quality
shall be replaced by the factory free of charge under the following conditions that the user obeys the stipulations in the Operation and Maintenance Manual for Model 8320 Diesel Engine and the stipulations in the Points for Attention to Heavy Fuel Oil Operation for Series 320 Engines within 18 months from the date of ex-factory of the engine and the operating time is not exceeded 2000hours, and that the operating data must be recorded.
6.4 The factory shall not be responsible for the parts and / or components damaged due to the
following causes:
(a) Natural wear
(b) Poor storage and maintenance
(c) Operating not according to the operating manual
(d) Use the lube oil, cooling water and fuel oil not according to the requirements in the
operating and maintenance manual
(e) Chemical reactions and corrosion
(f) Indirect losses incurred by the default of the engine
(g) The user’s fault。