产品规格书-ME908
产品规格书完整
NO.:PS091101上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.产品规格书PRODUCT SPECIFICATION顾客：Client：产品名称：Connector Product Name:产品编码：/Part Number版本号：/ Version Number：制定审核EditCheck上海市松江区洞泾镇洞薛路651弄88号徕木：Laimu：Auto Meter Connector（汽车仪表连接器）SEE TABLE/批准Approval邮编：201619上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.编 号PS091101Serial Number 产品规格书Product Specification目版本号/ Version Number 产品名称 Connector Product Name 产品编码 See TablePart Number录CONTENT0更改记录........................................................................................................................................3 1产品描述Product description.. (4)1.1产品简图Outline drawing ..................................................................................................4 1.2产品组成BOM (5)2总体要求General (5)2.1功能描述Functional description ..........................................................................................5 2.2安装位置Mounting location ................................................................................................5 2.3温度范围Ambient temperature range .................................................................................5 2.4额定范围Rating range ........................................................................................................5 3默认测试条件Default test conditions .............................................................................................5 4产品性能Performance . (6)4.1外观Appearance..................................................................................................................6 4.2结构尺寸Dimension.............................................................................................................6 4.3接触电阻Contact resistance...................................................................................................6 4.4绝缘电阻Insulation resistance...............................................................................................6 4.5耐电压Withstand voltage......................................................................................................7 4.6温升Temperature rise............................................................................................................7 4.7插入力Connector Mating Force.............................................................................................7 4.8拔出力Connector Unmating Force.........................................................................................7 4.9端子保持力Terminal to Connector Retention...........................................................................8 4.10振动Vibration....................................................................................................................8 4.11温度循环Temperature cycling..............................................................................................8 4.12耐高温Heat Resistance.......................................................................................................9 4.13耐低温Cold Resistance.......................................................................................................9 4.14盐雾Salt spray...................................................................................................................9 4.15耐焊接热Resistance to soldering heat.................................................................................10 4.16沾锡性Solderability. (10)上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.编 号PS091101Serial Number 产品规格书Product Specification0更改记录序号 版本号 更改前描述No.： Version Description Before ModificationNumber123456版本号/ Version Number 产品名称 Connector Product Name 产品编码 See TablePart Number更改后描述 批准 日期Description After ModificationApprovalDatePage 3 of 11FOR-TS3-D08-01版本/版次：A1上海徕木电子股份有限公司SHANGHAI LAIMU ELECTRONICS CO., LTD.编 号PS091101Serial Number 产品规格书Product Specification1产品描述Product description1.1产品简图Outline drawing适用于本规格书的产品系列，如下表：P/N.料号No. No. of PIN Color A1.2产品组成BOM1.2.1接触件：黄铜,底镀镍，整体镀锡；版本号/ Version Number 产品名称 Connector Product Name 产品编码 See TablePart NumberB C D E FContact ：Brass, Pure Tin plated over Nickel under plating ； 1.2.2塑料本体：PBT+GF15；Housing ：PBT+GF15；2总体要求General2.1功能描述Functional description本产品主要适用于汽车仪表控制模块与线束的电力信号传输与连接。
EG2000A产品规格书
分段开关调光典型应用电路图 典型应用：R1=270R，R2=15R，1S<开关周期<3S： 开关第一次开启时，Iout=20mA； 开关第二次开启时，Iout=40mA； 开关第三次开启时，Iout=2mA；调光比为 50%：100%：5%； 当开关周期>3S，回复初始状态，Iout=20mA
恒流精度可以达到±5%； 安全，更可靠。
3. 具有过温保护功能；
管脚图
4. 无 EMC 问题；
5. 芯片与 PCB 可以共用铝基
板；
6. 线路简单，成本低廉；
7. 封装：ESOP-8
应用领域
1. 球泡灯 2. 日光灯 3. 筒灯 4. 吸顶灯
序号 1 2 3 4 5 6 7 8 GND
管脚 VDD VCC REXT1 REXT2 OUT2 OUT1 NC VIN 衬底
功能描述
EG2000A 是可分段调光调色 LED 恒流驱动控制电路，适用于 AC200-240V: 1、当 EG2000A 在分段调节亮度的应用中，可根据开启关闭电源开关，依次改变 输出电流的大小，从而改变 LED 的亮度，调节比例可通过外接 REXT 电阻进行调 整。 开关第一次开启 I1=0.3/Rrext2，开关第二次开启 I2=0.6/Rrext2,开关第三次开启 I3=0.6/（Rrext1+Rrext2），调光比例为 50%，100%，X%，X= Rrext1/（Rrext1+Rrext2）。 2、当 EG2000A 在分段调节色温的应用中，可根据开启关闭电源开关，依次改变 两路输出端口的开关状态，实现两路不同颜色 LED 灯的交替亮灭以实现调节色温 的目的，调节外接 REXT 电阻可对系统输出功率进行调节。芯片输出电流通过 REXT 电阻进行调节。 开关第一次开启 I1=0.3/Rrext1+0.3/Rrext2，开关第二次开启 I2=0.6/Rrext2，开关第 三次开启 I3=0.6/Rrext1
埃美柯集团 宁波时代仪表有限公司 产品手册说明书
埃美柯集团宁波时代仪表有限公司产品手册PRODUCT CATALOG 宁波时代仪表有限公司NINGBO SHIDAI INSTRUMENT CO.,LTD.400-808-8886时代仪表生产的“埃美柯”牌商标为中国著名商标，以及“最具市场竞争力品牌”。
“管理有心、生产用心、品质尽心、交货放心、服务贴心、客户安心”是我们长期奉行的经营理念，致力于高品质、高档次的新品开发是我们持之以恒的努力方向，以精良的品质和服务，最佳的性价比去赢得更多消费者的青睐。
埃美柯让⼈们⽣活更为美好。
注：使用时信号线应接一个上拉电阻，阻值为几K到几百K，功率为1/4W。
阻值越大，霍尔元件功耗越小。
一般选4.7K。
型号 公称口径LXHF-8直饮冷水水表暖通阀工作参数▲Ⅱ型▲Ⅰ型工作电压：2.55V~3.66V 本产品是将NB-IOT物联网通讯技超薄、小巧、大屏幕100%现场保护同时运行多个独立程序,16M的快闪内存4种通讯接口主要技术参数公称口径mm 准确度等级常用流量 Q3Q/Q=8031Q/Q=1.6213m/h10 2.5系统架构图智能抄表系统自来水公司燃气公司电力公司大型物业管理公司小区B小区A公共电话网/GPRS INTERNET 互联网集中器接连线无电力载波节点电力载波节点电力线采集器采集器扩展网表单元表单元表单元（每条扩展网总线传输距离可达300米）（每条扩展网总线传输距离可达300米）（每条扩展网总线传输距离可达300米）红外抄表节点手抄器扩展网扩展网表单元（每条扩展网总线传输距离可达300米）扩展网表单元表单元表单元表单元表单元扩展网（每条扩展网总线传输距离可达300米）采集器采集器RS485/M-BUS总线离距输传线总干主条每个04接可米0021达可器继中网干主网继中中继器扩展网网干主网继中（每条中继总线传输距离可达300米）主控机：在各公司主控机上安装智能抄表系统管理软件，由该系统软件发出抄表指令，集中器做出相应的响应，完成抄表任务。
商品说明书产品的包装和配件清单
商品说明书产品的包装和配件清单商品说明书尊敬的用户：感谢您购买我们的产品。
为了让您更好地了解商品的包装和配件，请仔细阅读本商品说明书。
一、包装我们的商品采用精美的包装，旨在确保商品在运输过程中的安全和完好无损。
包装材料选用环保材料，符合相关法规和标准，同时具备良好的防摔、防潮和防尘功能。
商品的包装设计简洁大方，体现了产品的高品质和独特之处。
二、配件清单以下是本商品所附赠的配件及其详情：1. 电源适配器- 输入电压：220V-240V- 输出电压：5V- 输出电流：2A- 插头类型：国标插头（可根据您的需求提供适配器）2. 数据线- 长度：1.5米- 接口类型：USB-A 至 USB-C- 适用范围：可用于连接设备和充电3. 耳机- 接口类型：3.5mm 耳机插孔- 频率响应范围：20Hz-20kHz- 阻抗：32Ω- 线材长度：1.2米4. 保修卡- 保修期限：一年- 保修范围：自然损坏、非人为损坏的故障请注意，以上配件根据不同产品型号和配置可能会有所变化，具体配件清单以实际商品为准。
三、其他注意事项1. 请在使用前仔细阅读产品说明书，并按照说明书的指引正确使用商品及附件。
2. 如出现配件缺失或包装破损的情况，请立即联系销售商或售后服务中心进行处理。
3. 不要将商品包装材料随意丢弃，应当根据当地的环保规定进行正确的处理。
如需了解更多关于本商品的信息，请查阅产品介绍手册或访问官方网站。
如有疑问或需要进一步的技术支持，请随时联系我们的客服团队。
再次感谢您对我们产品的支持和信赖，我们将持续为您提供优质的商品和服务。
谢谢！附注：本商品说明书仅适用于指定产品，请勿将其用于其他用途或商品。
Eon Silicon Solution IC产品顶部标记说明书
PurposeEon Silicon Solution Inc. (hereinafter called “Eon”) is going to provide its products’ top marking on ICs with < cFeon > from January 1st, 2009, and without any change of the part number and the compositions of the ICs. Eon is still keeping the promise of quality for all the products with the same as that of Eon delivered before. Please be advised with the change and appreciate your kindly cooperation and fully support Eon’s product family.Eon products’ New Top MarkingcFeon Top Marking Example:Continuity of SpecificationsThere is no change to this data sheet as a result of offering the device as an Eon product. Any changes that have been made are the result of normal data sheet improvement and are noted in the document revision summary, where supported. Future routine revisions will occur when appropriate, and changes will be noted in a revision summary.Continuity of Ordering Part NumbersEon continues to support existing part numbers beginning with “Eon” and “cFeon” topmarking. To order these products, during the transition please specify “Eon top marking” or “cFeon top marking” on your purchasing orders.For More InformationPlease contact your local sales office for additional information about Eon memory solutions.Distinctive Characteristics MCP Features■Power supply voltage of 2.7 V to 3.3V ■High performance- 70 ns■Package- 7 x 9 x 1.2mm 56 ball FBGA ■Operating Temperature - 25°C to +85°CGeneral DescriptionThe EN71GL series is a product line of stacked Multi-Chip Product (MCP) packages and consists of:■ EN29GL128 (Page mode) Flash memory with lowest address sector protected.■Pseudo SRAM.For detailed specifications, please refer to the individual datasheets listed in the following table.Device DocumentNOR Flash EN29GL128Pseudo SRAM ENPSL32Product Selector Guide128Mb Flash MemoryDevice-Model#EN71GL128B0pSRAM density32M pSRAMFlash Access time 70ns pSRAM Access time 70nsPage read Access time25ns pSRAM Page read Accesstime25nsPackage56 FBGAMCP Block DiagramConnection DiagramMCP Flash-only Addresses Shared Addresses EN71GL128B0 A22, A21 A20 – A0Pin DescriptionSignal Description A22–A0 23 Address Inputs (Common)DQ15–DQ0 16 Data Inputs/Outputs (Common)CE1#f Chip Enable 1 (Flash)CE1#ps Chip Enable 1 (pSRAM)CE2ps Chip Enable 2 (pSRAM)OE# Output Enable (Common)WE# Write Enable (Common)RY/BY# Ready/Busy Output (Flash)UB# Upper Byte Control (pSRAM)LB# Lower Byte Control (pSRAM)RESET# Hardware Reset Pin, Active Low (Flash)WP#/ACC Hardware Write Protect/Acceleration Pin (Flash)V CC f Flash 3.0 volt-only single power supplyV CC ps pSRAM Power SupplyV SS Device Ground (Common)NC Pin Not Connected InternallyLogic SymbolORDERING INFORMATIONEN71GL128 B0 ―70 C W PPACKAGING CONTENT(Blank) = ConventionalP = Pb FreeTEMPERATURE RANGEW = Wireless (-25°C to +85°C)PACKAGEC =56-Ball Fine Pitch Ball Grid Array (FBGA)0.80mm pitch, 7mm x 9mm packageSPEED70 = 70nspSRAM densityB0 = 32M pSRAMBASE PART NUMBEREN = Eon Silicon Solution Inc.71GL = Multi-chip Product (MCP)3.0V Page Mode Flash Memory and RAM128 = 128 Megabit (8M x 16)PACKAGE MECHANICAL56-ball Fine-Pitch Ball Grid Array (FBGA) 7 x 9 mm Package, pitch: 0.8mm, ball: 0.4mmNote : Controlling dimensions are in millimeters (mm).Revisions ListRevision No Description DateA Initial Release 2009/05/27B Update EN29GL128 (Page mode) Flash memory with lowest address sector2009/11/23 protected on page 2.。
908使用说明书
XK3102-908第一章概述XK3102—908 称重显示控制器采用MCS—51 单片微处理器及高速的Σ-△A/D 转换技术，对重量进行转换显示，最高可达80 次/秒的转换速度。
本显示器可方便地与电阻应变式传感器连接组成配料秤、定量包装秤、控制秤等，适用于各种高速度与高精度称重要求的控制场合。
XK3102—908 称重显示器主要功能和特点：1、集成了加法秤、减法秤、分选秤功能，具备3 路外控输入和3 路控制输出2、标准异步串行通讯接口（RS232 或RS422/485），灵活的通讯方式（连续发送和指令应答）。
3、0-20mA/4-20mA(或0-5V/0-10V) DA 精确输出，可校准4、上下限报警输出设置5、高精度A/D 转换，可读性达1/300006、5 点非线性修正7、换表无需重新标定，只需输入原仪表的参数即可使用8、大屏幕显示输出9、灵活的峰值保持功能10、称量数据累计量和累计次数等信息的贮存、检查、删除处理，具有断电数据保护11、可连接串行打印机，打印称重记录、累计量或配方，手动或者自动打印可选12、具备去皮功能，在自动控制开始可以选择是否自动去皮13、AD 数据的数字滤波强度可根据需要设置更改14、多种操作信息和出错信息提示15、打印单位选择：kg、t、g、lb16、具有精确的时钟、日历、自动闰年、闰月，不受断电影响。
17、具备恢复出厂设置功能18、抗干扰性能强，可靠性高第二章主要参数1. 型号：XK3102—908 称重显示控制器2. 准确度: 3 级，n=30003. 输入信号范围：-19mV～+19mV4. 非线性：≤0.01%F.S5．传感器连接个数：1～8 只 350Ω传感器6. 传感器供桥电源：DC：5V；350mA7. 传感器连接方式：采用 6 线制，长线自动补偿。
8. 显示：单排 7 位LED,字高0.5 英寸,11 个状态指示灯9. 分度值：1/2/5/10/20/50/100 可选10. 时钟：可显示实时时间，日期。
3M产 品 型 号 产 品 名 称 标 准 规 格 一 般 用 途
产品型号/ 产品名称/ 标准规格/ 一般用途3M 9495LE 300LSE 双面胶带 , 难粘表面之塑料、金属、泡绵等3M 9690 300MP 双面胶带 , 适用手机电话等便携电子产品透明窗粘结3M 9495MP 200MP双面胶带 , 适用手机电话等便携电子产品透明窗粘结3M 9492MP 200MP双面胶带 , 适用手机电话等便携电子产品透明窗粘结3M 9009 300 双面胶带 , 难粘表面之塑料、金属、泡绵等3M 9019 300 双面胶带 , 难粘表面之塑料、金属、泡绵等3M 966 100MP 双面胶带 , 耐260度高温（FPC适用）3M 9079 3M耐高温双面胶带, 耐260度高温（FPC适用）9461P 100MP 双面胶带 , 耐260度高温（FPC适用）3M 9485PC 350 双面胶带 , 耐260度高温（FPC适用）3M 9482PC 350双面胶带 , 耐260度高温（FPC适用）3M 9460PC VHB 双面胶 , 0.05MM厚纯胶膜耐高温,FPC用3M 9469PC VHB 双面胶 , 0.13MM厚纯胶膜耐高温,FPC用3M 9473PC VHB 双面胶 , 0.25MM厚纯胶膜耐高温,FPC用3M 8142 光学透明双面胶带 , 0.13MM厚适用于触摸屏等需光透明之场合3M 467MP 468 双面胶带 , 一般工业用途3M 8008 8018 8608 988T 52330 55256 , 一般工业用途之双面胶带3M 7952MP 200MP 双面胶带 , 双面离型纸之467MP胶带3M 7945MP 200MP 双面胶带 , 薄膜开关，电路间片(含PET)3M 7956MP 200MP 双面胶带 , 薄膜开关，电路间片(含PET)3M 7957MP 200MP 双面胶带 , 薄膜开关，电路间片(含PET)3M 7959MP 200MP 双面胶带 , 薄膜开关，电路间片(含PET)3M 7961MP 200MP 双面胶带 , 薄膜开关，电路间片(含PET)3M 7993MP 200MP PET单面胶带 , 适用手机电话等便携电子产品按键3M 7997MP 200MP PET单面胶带 , 适用手机电话等便携电子产品按键3M 9672LE 300LSE 双面胶带 , 无基材胶膜，适用于难粘表面,3M 9075 丙烯酸系算面胶 , 无纺布基材3M 6408 丙烯酸系算面胶 , 无纺布基材,纸基,3M 9448 橡胶系双面胶 , 无纺布双面胶3M 9080 丙烯酸系双面胶 , 无纺布双面胶3M 4930 VHB, 0.4MM厚特强粘性泡绵双面胶3M 4920 VHB ,0.4MM厚特强粘性泡绵双面胶3M 4615 丙烯酸泡绵双面胶 , 0.4MM厚高柔性,3M 4945 VHB 双面胶 , 1.10MM厚特强粘泡绵双面胶带3M 4941 VHB 双面胶 , 1.10MM厚特强粘泡绵双面胶带3M 4611 VHB 双面胶 , 1.10MM厚特强粘泡绵双面胶带3M 5413 Kapton 胶带 , PCB波峰焊保护用, made in USA;3M 7413 Polyimide 胶带 , PCB波峰焊保护用,made in China;8402 PET胶带 600MMX33M PCB波峰焊保护用;8952,8951,851,850,853 PET胶带,3M 471 pvc胶带 , 标示胶带多种颜色3M 5702 , , 黄黑相间标示胶带3M 5453 PTFE 胶带 12"X60YD heat seal tape3M 5421 5423 5425 UHMW-PE 1"X18YD 抗磨降低摩擦胶带3M 425 铝箔胶带 1"X60YD 一般性用途3M 9703 自粘导电双面胶带 12"X36YD EL片、薄膜开关FPC等用3M 9713 热压导电双面胶带 12"X36YD EL片、薄膜开关FPC等用3M 331T 蓝色保护胶带 1.2MX100M PCB电镀保护胶带，不锈钢表2K10,3K04,332,保护膜;3M 2142 美纹纸遮蔽胶带 400mmX 50m PCB过锡炉（波峰焊）等遮蔽场合使用3M 244 美纹纸遮蔽胶带 400mmX 50m PCB过锡炉（波峰焊）等遮蔽场合使用8152,8902, PCB电镀绿胶带 1000MMX50M PCB电镀等遮蔽场合使用610,600 测试胶带 1 "X36YD3M 616 遮光胶带 1"X36YD3M 810 隐形胶带 3/4"X36YD 一般性用途3M 811 半透明胶带 1/2"X36YD 一般性用途3M 665,666 双面胶带 1"X25YD 一面低粘性5952,5925,5962,465,ST-416,55256,55257,8018,8008,8004,4032,1600T,CIP-66,CIP-01; 4210,4214,5344,4229P,4211,CP5008,5012;7413T,7413D,5413,5419,7419;7816,7815, 57816,4950,4951,4609,4612,4611,4032,4008;5300,4799,471,5702,2328,2214,200,244,21 42,9996j,917,r3227,906b,900b,405,9022;9969b;1020,1015,1040,8592,8591,55230,8411, 5491;3M VHB胶带：4926， 4963，4941，4956，4919，4979，4991，5925，5952，5962，4943，4957，4604，4608，4612，4620，4630，4609，4615，4611，4646，4655，4920，4930，4950，4955，4945，4946，4905，4910，4951，4932。
美国巴克莱尼公司产品目录说明书
121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。
iHome产品说明书
Using the iHM62To unlock and expand each speaker, grip the top and bottom and give a small twist counter-clockwise. DO NOT pull hard once open, as the built in spring will automatically extend the speaker to its proper position.Press speaker down from the top and twist clockwise to lock in place when not in use.Connecting the iHM62The iHM62 is powered by a rechargeable battery in each speaker. When the blue power light turns red, or if you start to notice sound distortion at higher volumes, it's time to recharge the battery.• Connect the larger USB plug to a powered USB port, such as that on a computer. The light on each speaker will stay red while charging and turn blue when fully charged.Note: you can continue to listen to the speaker and/or enjoy lighting effects while it is charging- Press the LED lighting effects button to cycle through 3 lighting effects modes: colors cycle, one color, none.Colors Cycle :- LEDs will fade in and out in sequence: blue, green, amber, red, repeat (color cycle is the default when the unit is powered on).One Color :- Press during cycle mode to hold the last color shown Note:LED will shine at full brightness.None :- Enjoy your music without lighting effects.Note: speaker is still on, indicated by power LED.Charging the iHM62LED Lighting Effects:• Connect a mini-USB plug to the input jack on each speaker.• Connect the stereo 3.5mm audio plug to the headphone jack or line-out of any audio device.• Slide the Power Switch of each speaker to the ON position. The blue power light will come on.• Press play on your audio device and adjust its volume to listen to audio.Note: the larger USB plug is used for charging only, not for audio. Please refer to next section for charging instructions.。
METAL EMBOSSER SERIES ME 1000 - 2000 产品介绍说明书
METAL EMBOSSER SERIES ME 1000 - 2000THE BEST VALUE IN METAL PLATE MARKING STANDARDManual input / output single access point BUILT FOR TOUGH WORKING ENVIRONMENTS Blocco USASimplex 2Embossing type set Up to 250 plates capacity hoppers: input & outputRELIABLE & COST EFFECTIVE - Alternative to stamping and dies. EASY & FLEXIBLE - Semi-automatic (ME1000) or automatic (ME2000) loading and unloading has never been easier. Equipped with a unique clamp for plates of most dimensions and materials as well as a large selection of fonts, the METAL EMBOSSERS are designed to meet most requirements in metal plate marking. CIM has developed various command protocols allowing the ME1000 / 2000 to easily interface with custom applications.TECHNICAL FEATURES cimitaly.it PLATE & FEEDER dimensions width: 30 ÷ 115 mm / 1.18 ÷ 4.53 in height: 21 ÷ 90 mm / 0.83 ÷ 3.54 in thickness 0.4 ÷ 0.9 mm / 0.0157 ÷ 0.0354 in materials stainless steel, carbon steel, aluminium, copper, and brass input hopper ME1000: manual feed - Single Access Point ME2000: up to 250 plates capacity. ( Ø 0,4 mm/0.0157 in)output hopper ME1000: manual feed ME2000: up to 250 plates capacity. Options: FIFO (first in – first out) technology or side eject display LCD 2 lines by 40 characters LCD display for diagnostic visualization and offline operation FLASH memory technology for easy firmware upgrade operation others VARIOUS from the top edge up to 65 mm / 2.56 in, leaving free 4 mm / 0.157 in at the bottom edge. Reversed character sets are available on request for embossing close to the bottom edge of the tag. Measurements are taken from the base of the character.technology Embossing, Indent or Debossing drum capacity 60 or 90 slots - 45 slots drum available for special applications type set embossing debossing many character configurations available:Simplex 2, OCRB1, Block USA, Double Block, etc. - Height 3 ÷ 12 mm / 0.118 ÷ 0.472 in indenting Simplex1, Simplex 2, etc. - Height 1 ÷ 4 mm / 0.039 ÷ 0.157 in Elite Dog Tag 1 plate in 18 sec. (55 characters)embossing area performance STAMPING communication interface RS232 serial port operating systems Sword PC application proprietary software compatible with Windows/XP/Vista/7application software automatic data field; plate archive; DBIII, DBIV, Excel, MS Access file compatibility;self diagnostics, automatic remake of rejected plates, resetable and non-resetable counters. LCD Edit via external keyboard; 20 storable formats downloadable data format 50 fields of 42 characters each (Variable, Fixed data, Counters, etc.)protocol CIM, Xon-Xoff, MultiEmbosser, Stored Format default, Stored Format Select and Pound-Pound COMMUNICATION INTERFACE & SOFTWARE power supply power consumption 800 Watt max operating environment temperature: 5 ÷ 40 °C / 41 ÷ 104 °F relative humidity: 30% ÷ 90% non condensing dimensions (WxDxH)630 x 740 x 380 mm / 24.8 x 29.1 x 15 in weight ME1000 75 Kg / 165 lbs - ME2000 78 Kg /172 lbs HARDWARE 100 - 117 - 220 - 230 or 240 Volts - 50 or 60 Hz EMBOSSING AREA30 x 21 mm 1.18x0.38 in 115 x 90 mm 4.53 x 3.54 in lithium back up battery; security operation with key lock; emergency stop red button; machine status indicator lights; near end input / near full output hopper plate sensors for continuous production (ME2000); visual alarm kit for operator alert。
产品规格书(英文)TM190MFS01 1.0
SHANGHAI AVIC OPTOELECTRONICSQ/S1016-2011MODEL NO. : ISSUED DATE: VERSION :TM190MFS01 2011/03/16 1.0■Preliminary Specification □Final Product SpecificationCustomer :Approved by NotesSHANGHAI AVIC Confirmed :Prapared by Checked by Approved byWei Zhang 2011/03/16Hyuan Chen 2011/03/17Anfernee Du 2011/03/17This technical specification is subjected to change without noticeThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 1 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-2011TABLE OF CONTENTSTABLE OF CONTENTS ........................................................................................................................................... 2 RECORD OF REVISION.......................................................................................................................................... 3 1. OUTLINE.............................................................................................................................................................. 4 1.1 STRUCTURE AND PRINCIPLE..................................................................................................................... 4 1.2 APPLICATIONS.............................................................................................................................................. 4 1.3 FEATURES .................................................................................................................................................... 4 2. GENERAL SPECIFICATIONS.............................................................................................................................. 5 3. ABSOLUTE MAXIMUM RATINGS ....................................................................................................................... 6 4. BLOCK DIAGRAM ............................................................................................................................................... 7 5. MECHANICAL SPECIFICATIONS ....................................................................................................................... 8 6. ELECTRICAL CHARACTERISTICS .................................................................................................................... 9 7. CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS............................................................................ 10 7.1 LVDS ............................................................................................................................................................ 10 7.2 CONNECTION BETWEEN RECEIVER AND TRANSMITTER FOR LVDS................................................. 11 8. DISPLAY COLORS AND INPUT DATA SIGNALS .............................................................................................. 12 9. INTERFACE TIMING.......................................................................................................................................... 13 9.1 TIMING CHARACTERISTICS...................................................................................................................... 13 9.2 INPUT SIGNAL TIMING CHART............................................................................................................... 14 9.3 PIXEL DATA ALIGNMENT OF DISPLAY IMAGE ...................................................................................... 15 9.4. POWER SUPPLY VOLTAGE SEQUENCE................................................................................................. 16 10. OPTICS ............................................................................................................................................................ 18 11. MARKINGS ...................................................................................................................................................... 22 11.1 PRODUCT LABEL...................................................................................................................................... 22 11.2 PACKING.................................................................................................................................................... 23 11.3 INSPECTION RECORD SHEET................................................................................................................ 23 11.4 TRANSPORTATION ................................................................................................................................... 23 11.5 SIZE AND WEIGHT FOR PACKING BOX ................................................................................................. 23 11.6 OUTLINE FIGURE FOR PACKING (For reference) .................................................................................. 24 12. PRECAUTIONS ............................................................................................................................................... 25 12.1 ASSEMBLY AND HANDLING PRECAUTIONS ......................................................................................... 25 12.2 OTHER....................................................................................................................................................... 25 13. OUTDRAWING ................................................................................................................................................ 26The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 2 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-2011RECORD OF REVISIONRev1.0Issued Date2011-03-16DescriptionPreliminary ReleaseEditorWei ZhangThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 3 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20111. OUTLINE1.1 STRUCTURE AND PRINCIPLETM190MFS01 open cell is composed of the amorphous silicon thin film transistor liquid crystal display (a-Si TFT LCD) panel structure with driver LSIs for driving the TFT (Thin Film Transistor) array. The a-Si TFT LCD panel structure is injected liquid crystal material into a narrow gap between the TFT array glass substrate and a color-filter glass substrate. Color (Red, Green, Blue) data signals from a host system (e.g. PC, signal generator, etc.) are modulated into best form for active matrix system by a signal processing board, and sent to the driver LSIs which drive the individual TFT arrays. The TFT array as an electro-optical switch regulates the amount of transmitted light from the backlight assembly, when it is controlled by data signals. Color images are created by regulating the amount of transmitted light through the TFT array of red, green and blue dots.1.2 APPLICATIONS• Monitor for PC1.3 FEATURES• a-Si TFT active matrix • LVDS interface • R.G.B input 8bit, 16.7 millions colors (6bit+Hi-FRC) • Resolution WXGA+ (1,440× 900 pixels) • Wide viewing angle 85°/85° (L/R); 80°/80° (U/D) • High contrast ratio 1000 :1 • Fast response time (Ton+ Toff= 5 ms）The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 4 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20112. GENERAL SPECIFICATIONSDisplay area Diagonal size of display Drive system Display color Pixel Pixel arrangement Pixel pitch Signal system Power supply voltage408.24 (H) × 255.15 (V) mm (typ.) 48.0 cm (19.0 inches) a-Si TFT active matrix 16.7 M colors (6bit+ Hi-FRC) 1,440 (H) × 900(V) pixels RGB vertical stripe 0.2835 (H) × 0.2835 (V) mm LVDS 2port LCD panel signal processing board: 5.0VThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 5 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20113. ABSOLUTE MAXIMUM RATINGSParameter Power supply voltage Input voltage for signals Storage temperature Operating temperature Absolute humidity Operating altitude Storage altitude Symbol VDD Vi Tst Top AH Rating -0.3 ~ +6.0 -0.3 ~ +3.3 -20 ~ +60 0 ~ +50 ≤ 70 ≤ 4,850 ≤ 13,600 Unit V V °C °C g/m3 m m Remarks Ta = 25°C Ta = 25°C Note 3 Note 3, 4 Ta > 50°C 0°C≤ Ta≤ 50°C -20°C≤ Ta≤ 60°CNote1: Display signals are DA0+/-, DA1+/-, DA2+/-, DA3+/-, CKA+/-, DB0+/-, DB1+/-, DB2+/-, DB3+/-,and CKB+/-. Note2: Function signal is MSL. Note3: Temperature and relative humidity range is shown in the figure below. (a) 90%RH Max. (Ta≤ 40°C) (b) Wet-bulb temperature should be39°C Max. (Ta> 40°C) (c) No condensation. Note4: The temperature of panel display surface area should be 0°C Min and 60°C Max.Relative Humidity（％RH）80 60 Operating Range 40Temperature (℃) -40 -2020 5 0Storage Range 20 40 60 80The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 6 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20114. BLOCK DIAGRAMI/F LCD MODULE100ΩDB0+ DB0DB1+ DB1DB2+ DB2CKB+ CKADB3+ DB3-100Ω 100Ω 100Ω 100Ω 100ΩLVDS ReceiverDA0+ DA0DA1+ DA1DA2+ DA2CKA+ CKADA3+ DA3-100Ω 100Ω 100Ω Timing Controller 100ΩSource DriverLCD Panel H: 1440× 3（R,G,B） V: 900Gate DriverVDDFuseDC/DC ConverterPowerEdge side backlight` VBLH2VBLH1 VBLC1 VBLC2 FG GNDNote: System ground (GND), FG (Frame ground) in the product should be connected together in customer equipment.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 7 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20115. MECHANICAL SPECIFICATIONSParameter Display area Display dot number Pixel pitch Dot pitch Color arrangement Display color Specification 408.24(H) × 255.15(V) mm (typ.), [48.0 cm (19.0 inches)] 1440×3(H) ×900(V) 0.2835(H)×0.2835(V) 0.0945(H) ×0.2835(V) RGB (Red dot、Green dot、 Blue dot) vertical stripe 16,777,216(6bit+Hi FRC) Unit mm mm mm colorThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 8 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20116. ELECTRICAL CHARACTERISTICSParameter Power supply voltage Power supply current Permissible ripple voltage Differential input voltage Differential input threshold voltage for LVDS receiver Input voltage receiver Rush current width for Low High LVDS Symbol VDD IDD VRP min. 4.5 200 -100 0 100 typ. 5.0 700 Note1 max. 5.5 1000 Note 2 200 600 100 3.3 3.0 Unit V mA mV mV mV mV V Ω A at VCM = 1.2V Note3 Note4 Remarks at VDD = 5.0V VDD︱Vid︱ VTLVTH Vi RT IrushTerminating resistorNote 1: Black pattern Note 2: 1H1V dot inverse pattern Note 3: Common mode voltage for LVDS receiver Note4: Measurement Conditions:5V Q1 R1 47K MOSFET-N F1 VDD Fuse(2A) C1 Cap 1uF/16VGND 5V1 S2 3 2 SW-SPDTGND R2 1K Q2 MOSFET-N12VR3C2 Cap 1uF/16V C3 Cap 10uF/16V GND20KThe information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 9 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20117. CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS7.1 LVDSCN1: FI-XB30SSRLA-HF16 (Produced by JAE) or equivalent.Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Name RXO0RXO0+ RXO1RXO1+ RXO2RXO2+ GND RXOCRXOC+ RXO3RXO3+ RXE0RXE0+ GND RXE1RXE1+ GND RXE2RXE2+ RXECRXEC+ RXE3RXE3+ GND GND NC GND VCC VCC VCC Description Negative LVDS differential data input. Channel O0 (odd) Positive LVDS differential data input. Channel O0 (odd) Negative LVDS differential data input. Channel O1 (odd) Positive LVDS differential data input. Channel O1 (odd) Negative LVDS differential data input. Channel O2 (odd) Positive LVDS differential data input. Channel O2 (odd) Ground Negative LVDS differential clock input. (odd) Positive LVDS differential clock input. (odd) Negative LVDS differential data input. Channel O3(odd) Positive LVDS differential data input. Channel O3 (odd) Negative LVDS differential data input. Channel E0 (even) Positive LVDS differential data input. Channel E0 (even) Ground Negative LVDS differential data input. Channel E1 (even) Positive LVDS differential data input. Channel E1 (even) Ground Negative LVDS differential data input. Channel E2 (even) Positive LVDS differential data input. Channel E2 (even) Negative LVDS differential clock input. (even) Positive LVDS differential clock input. (even) Negative LVDS differential data input. Channel E3 (even) Positive LVDS differential data input. Channel E3 (even) Ground Ground Not connection. Ground +5.0V power supply +5.0V power supply +5.0V power supplyCN1: The inserting side is as follows Connector 1, 2 Printed wiring board ……………………. 29, 30The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 10 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20117.2 CONNECTION BETWEEN RECEIVER AND TRANSMITTER FOR LVDSNote1: The lowest bit (RA0, GA0, BA0, RB0, GB0, BB0), the most upper bit (RA7, GA7, BA7, RB7, GB7, BB7) Note2:Connecting cable between LCD panel’s connector and transmitter should use 100Ω twisted line. Note3: If only Hsync and Vsync, the product don’t work. Make sure DE signal has been input.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 11 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20118. DISPLAY COLORS AND INPUT DATA SIGNALSThis product can display in equivalent to 16,777,216 colors in 256 scales. Also the relation between display colors and input data signals is as the following table.Display colorsBlack BlueData signal （0:Low level，1:High Level）R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B00 0 1 1 0 0 1 1 0 00 0 1 1 0 0 1 1 0 0 00 0 1 1 0 0 1 1 0 0 00 0 1 1 0 0 1 1 0 0 0 : :0 0 1 1 0 0 1 1 0 0 00 0 1 1 0 0 1 1 0 0 00 0 1 1 0 0 1 1 0 0 10 0 1 1 0 0 1 1 0 1 00 0 0 0 1 1 1 1 0 0 00 0 0 0 1 1 1 1 0 0 00 0 0 0 1 1 1 1 0 0 00 0 0 0 1 1 1 1 0 0 0 : :0 0 0 0 1 1 1 1 0 0 00 0 0 0 1 1 1 1 0 0 00 0 0 0 1 1 1 1 0 0 00 0 0 0 1 1 1 1 0 0 00 1 0 1 0 1 0 1 0 0 00 1 0 1 0 1 0 1 0 0 00 1 0 1 0 1 0 1 0 0 00 1 0 1 0 1 0 1 0 0 0 : :0 1 0 1 0 1 0 1 0 0 00 1 0 1 0 1 0 1 0 0 00 1 0 1 0 1 0 1 0 0 00 1 0 1 0 1 0 1 0 0 0Basic Color Red grayscaleRed Magenta Green Cyan Yellow White Black Dark0Bright Red Black1 1 1 0 01 1 1 0 0 01 1 1 0 0 01 1 1 0 0 0 : :1 1 1 0 0 01 1 1 0 0 00 1 1 0 0 01 0 1 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 0 : :0 0 0 0 0 00 0 0 0 0 00 0 0 0 0 10 0 0 0 1 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 0 : :0 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 0Green grayscaleDark0Bright Green Black0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 0 : :0 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 01 1 1 0 0 01 1 1 0 0 01 1 1 0 0 01 1 1 0 0 0 : :1 1 1 0 0 01 1 1 0 0 00 1 1 0 0 01 0 1 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 00 0 0 0 0 0 : :0 0 0 0 0 00 0 0 0 0 00 0 0 0 0 10 0 0 0 1 0Blue grayscaleDark0Bright Blue0 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 00 0 01 1 11 1 11 1 11 1 11 1 11 1 10 1 11 0 1The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 12 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20119. INTERFACE TIMING9.1 TIMING CHARACTERISTICSParameter Frequency Clock Rise time, Fall time Duty Horizontal signals Cycle Display period Cycle Display period Setup time DE/Data Hold time Rise time, Fall time Symbol 1/tc tc th thd tv tvd 13.3 912 min. 37.04 27.0 typ. 44.45 22.50 max. 55.56 18.0 Unit MHz ns ns µs CLK CLK 20 1100 ms H H ns ns ns Note 1 Note 1 Remarks LVDS transmitter inputRefer to the timing characteristics of LVDS transmitter 14.8 754 18.0 800 720 16.67 926 900 Refer to the timing characteristics of LVDS transmitter 26.5 90055.5kHz(typ.) 60.0Hz(typ.) -Vertical signalsNote1: See the data sheet of LVDS transmitter.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 13 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20119.2INPUT SIGNAL TIMING CHART Horizontal timingCLK DATA(A) note1 DATA(B) DEthd thInvalid Invalid 1 2 3 4 1437 1439 1438 1440 Invalid InvalidVertical timing DATA(A),(B)Invalid 1 2 899 900 InvalidDEtvd tvNote 1: DATA(A)=RA0-RA7,GA0-GA7,BA0-BA7 DATA(B)=RB0-RB7,GB0-GB7,BB0-BB7The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 14 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20119.3PIXEL DATA ALIGNMENT OF DISPLAY IMAGEThe following chart is the coordinates of per pixel Odd Pixel: RA= R DATA GA= G DATA BA= B DATA Even Pixel : RB=R DATA GB=G DATA BB=B DATAD(1,1) RA GA BAD(2,1) RB GB BBD(1,1) D(1,2) D(1,3) • • • D(1,900)D(2,1) D(2,2) D(2,3) • • • D(2,900)D(3,1) D(3,2) D(3,3) • • • D(2,900)••• ••• ••• ••• ••• ••• •••D(1440,1) D(1440,2) D(1440,3) • • • D(1440,900)The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 15 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-20119.4. POWER SUPPLY VOLTAGE SEQUENCE9.4.1 The sequence of backlight and powerONt＜10ms *1 4.5V 4.0V 90% 10% 10%VDD0V90% 10%t190%90%t4Display Signals*20Vt290%VALIDt390%Backlight signal t5 t6Timing Specifications:t1 0.47ms<t1 <10ms t2 0.5 ms<t2 <50ms t3 0ms<t3 <50ms t4 >1000ms t5 >200ms t6 >200ms *1. When VDD is on, but the value is lower than 4.5V, a protection circuit may work, then the module may not display. *2 The signal line is not connected with the module, at the end of cable the terminal resistor of 100Ω should be added. Note1: Display signals (D0+/-, D1+/-, D2+/-, D3+/- and CK+/-) must be “0” voltage, exclude the VALID period (See above sequence diagram). If these signals are higher than 0.3 V, the internal circuit is damaged. If some of display signals of this product are cut while this product is working, even if the signal input to it once again, it might not work normally. If customer stops the display signals, they should cut VDD. Note2: When VDD is on, it should be set above 4.0V. Note3: The backlight power supply voltage should be inputted within the valid period of display and function signals, in order to avoid unstable data display.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 16 of 26SHANGHAI AVIC OPTOELECTRONICS Q/S1016-2011 9.4.2 Power supply voltage ripple When the power supply is designed, the next form can give the reference. If the voltage ripple is over the value in next form, the noise should be seen in display area.Ripple (Measured at input terminal of power supply) VDD (5V to drive the panel) Ripple voltage ≤150mVP-P（Including spike noise）9.4.3 Fuse Parameter VDD Fuse Type F0603FA2000V032T Supplier AEM Rating 2A 32V Fusing current RemarksNote1: There are different power supply systems from the power input terminal. The power supply capacity should be less than the fusing current. If the power supply capacity is above the fusing current, the fuse may blow in a short time, and then nasty smell, smoking and so on may occur.The information contained herein is the exclusive property of SHANGHAI AVIC OPTOELECTRONICS Corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of SHANGHAI AVIC OPTOELECTRONICS Corporation.Page 17 of 26SHANGHAI AVIC OPTOELECTRONICSQ/S1016-201110. OPTICS10.1 Optical characteristics Base on TFT-LCD module TM190MDS01Note1 ,Note2Parameter Note1 Condition White at center Luminance θR=0°, θL=0° θU=0°, θD=0° White/Black at center Contrast ratio θR=0°, θL=0° θU=0°, θD=0° White Luminance uniformity θR=0°, θL=0° θU=0°, θD=0 White Red Chromaticity Green Blue X coordinate Y coordinate X coordinate Y coordinate X coordinate Y coordinate X coordinate Y coordinate θR=0°, θL=0° Color gamut θU=0°, θD=0 At center,against NTSC White to black Response time Right Viewing angle Left Up Down Black to white Ton+ Toff θU=0°, θD=0°, CR≥10 θU=0°, θD=0°, CR≥10 θR=0°, θL=0°, CR≥10 θR=0°, θL=0°, CR≥10 Ton Toff θR θL θU θD (75) (75) (70) (70) 1.3 3.7 5 85 85 80 80 (2.6) (7.4) (10) ms ms ms 。
广州东裕光电科技有限公司 产品规格书说明书
广州市东裕光电科技有限公司GUANGZHOU TONYU TECHNOLOGY CO., LTD产品规格书SPECIFICATION客户名称CUSTOMER产品名称PRODUCTION 发光二极管LED LAMP产品型号MODEL DY-202SDRD/SN-A1(EL)(HF)版本号VERSION NO A1.0地址(Add)：广东省广州市番禺区石基镇海涌路3号10号厂房2楼电话(Tel)：************传真(Fax)：************邮箱(E-mail)：************网址(Net)：客户确认CUSTOMER CONFIRMATION审核CHECKED BY编制PREPARED BY 汪建新陈少龙DY-202SDRD/SN-A1(EL)(HF)产品描述Descriptions⚫F3红发红，发光二极管。
产品特性Features⚫多种视角的使用(Choice of various viewing angles)⚫引脚间距2.54mm (2.54mm Lead spacing)⚫可在磁带和卷轴(Available on tape and reel )⚫无铅(Pb free)⚫符合RoHS要求(This product itself will remain within RoHS compliant version)产品应用Applications⚫电视机(TV set)⚫监测(Monito)⚫电话(Telephone)⚫电脑(Computer)包装方式Packing Quantity Specification⚫袋装：1000PCS/袋，4袋/小盒，10小盒/箱(1000PCS/1Bag，4Bags/1Box，10Boxes/1Carton)一、外形图Outline dimensions ：单位 Unit 公差 Tolerance 芯片材料 Die material 发光颜色 Emission color 胶体颜色 Lens colormm ±0.25mm InGaN Red Red DiffusedNotes: 1. All dimensions are in mm, tolerance is ±0.25 unless otherwise noted.2. An epoxy meniscus way extend about 1.5mm down the leads.3. Burr around bottom of epoxy may be 0.5mm Max.※备注：承认书之编号和型号可用于查询，客户如有需要，请提供相应的编号和型号。
产品规格
90*45.5*49.5cm 90*45.5*49.5cm 72*54*58cm 72.2*54*58.2cm 70.5*48*52.2cm 70.5*48*52.2cm 70.5*48*52.2cm
23.8kg 26.1kg 21.7kg 2kg 0.91kg 1.06kg 0.59kg 0.1kg 1kg 1.18kg 1.45kg 2.1kg 1.8kg 1.83kg 1.47kg 0.76kg 0.77kg 0.78kg 1.53kg 1.31kg 0.63kg 0.71kg 1.61kg 1.72kg 1.74kg
产品名称 装箱数量(个） 有氧盆栽 48 光合盆栽 24 加热杯简约款 24 加热杯三件套款 24 喵呼暖风机 48 便携餐具套装 120 蒸功夫饭盒 24 蒸快乐饭盒 24 蒸快乐不锈钢饭盒 18 蒸快乐拍档装 12 蒸快乐饭盒三层装 12 蒸快乐全钢款 12 蒸新鲜电热饭盒 18 情侣煮蛋器 24 单身煮蛋器 24 家庭煮蛋器 24 小馋猫全能电锅双层 16 小馋猫全能电锅单层 16 喵O煮蛋器 36 喵O不锈钢煮蛋器 36 喵O电炖盅（简易款） 12 喵O电炖盅（机械款） 12 喵O电炖盅（电子款） 12
体积/件 0.209 0.087
备注
0.43 0.157 0.22 0.165 0.185 0.134
0.203 0.203 0.226 0.227 0.177
e 908 说明书
Delivery includesDelivery includese 908 D e 908 B e 908 B ew• e 908 D microphone• e 908 B microphone• e 908 B ew microphone• MZA 900 P phantom power adapter • MZA 900 P phantom power adapter• MZH 908 D microphone clamp • MZH 908 B microphoneclamp• MZH 908 B microphoneclamp• Pouch• Pouch• Pouch• Quick guide• Quick guide• Quick guide • Safety guide• Safety guide• Safety guideProduct overview2135123 44e 908 D e 908 B / e 908 B ew1. Microphone head2. MZH 908 D microphone clamp3. Gooseneck4. XLR-3 connector5. Knurled screw 1. Microphone head2. MZH 908 B microphone clamp3. Gooseneck4. e 908 B: XLR-3 connectore 908 B ew: 3.5 mm jackInstallationAttaching the microphoneCarefully bend the flexible goose neck.Connecting the microphonePlug the 3.5 m m mini jack plug into the 3.5 m m jack socket of the MZA 900 P phantom power ad-apter (included with e 908 B and e 908 D).Tighten the coupling ring.Plug the XLR cable into the XLR output of the MZA 900 P phantom power adapter.OperationPositioning the microphone e 908 B/e 908 B ew on a wind instrument Use the microphone clamp to attach the e 908 to the bell of the instrument.It is vital to observe the following notes:Position Resulting sound CommentaryA Reduced ambient noise Directed into the bell of the instrument.B Clear, powerful soundC Balanced, natural sound Directed partly towards the bell and partly towardsthe body of the instrument.A B CPositioning the microphone e 908 D on a drumAttach the drum clamp to the rim of the drum by putting the upper part of the clip onto the rim and clipping it on by pushing down the drum clamp in a rotating action until it snaps into place.Loosen the knurled screw.Insert the gooseneck from the side into one of the two slots.Tighten the knurled screw.It is vital to observe the following notes:Position Resulting sound CommentaryD More fundamentalLittle overtones Position on the drum: 3–5 c m above the drumskin, directed towards the center of the drumskin, the fundamental to overtones ratio can be adjusted by changing the angle of the microphone.The most balanced results are obtained at an angle of 30–60°.E Less fundamentalMany overtonesF Pronounced proximity effect Optional: tangential position of the gooseneck inorder to reduce the distance to the drumskin.D E FYou can attach two microphones to the drum clamp (e.g. for picking up two toms in cramped space conditions). To do so, use both slots of the drum clamp.The various adjustment possibilities of the MZH 908 D and MZH 908 B clamps together with the flexible gooseneck enable the microphone to be optimally positioned on the sound source.Cleaning and maintaining the e 908Positioning the monitor loudspeakersTo prevent feedback and crosstalk, postion your monitor loudspeakers in the angle area of the highest cancellation of the microphone (approx. 180°).180°Cleaning and maintaining the e 908CAUTIONLIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT!Liquids entering the housing of the product can cause a short-circuit and damage the electronics.Keep all liquids away from the product.Do not use any solvents or cleansing agents.Disconnect the products from the power supply system and remove rechargeable batteries and batteries before you begin cleaning.Clean all products only with a soft, dry cloth.SpecificationsSpecificationsTransducer principle pre-polarised condenser microphone Frequency response 40 - 20,000 Hz Pick-up patterncardioid Sensitivity (free field, no load) 4.0 mV/Pa Nominal impedance (at 1 kHz)100 Ω (balanced)*Min. terminating impedance 2 kΩ*Max. sound pressure level (active) e 908 B, e 908 D e 908 B ew 35 dB(A)30 dB(A)Phantom powering 12 - 48 V*Connectore 908 B, e 908 D e 908 B ew XLR-3*3.5 mm jack Dimensions ⌀ 47 x 193 mm Weight140 g* with MZA 900 P (e 908 B/e 908 D); e 908 B ew for direct connection to ew transmittersPolar pattern125 Hz 250 Hz 500 Hz 1,000 Hz 2,000 Hz 4,000 Hz8,000 Hz 16,000 Hz30°0°180°150°120°60°90°0510152025dB30°0°180°150°120°60°90°Frequency response-40-50-60-70-80-90501002005001,0002,0005,00010,00020,000H zdBV 0°, 1 mOverview of applicationsConnector assignment321++e 908 B/e 908 De 908 B ew3.5 mm3.5 mm3.5 mmOverview of applicationsPrimary application Secondary application••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••e 602 II e 604e 608e 609 silver e 614e 835e 845e 865e 901e 902e 904e 906e 908e 914e 935e 945e 965。
Destaco 自动化产品型号说明说明书
EXPRESS DELIVERY FOR WORLD-CLASS AUTOMATION PRODUCTS GRIPPERS • ROTARIES • SLIDESTOOL CHANGERS • ESCAPEMENTSElectric GripperLinear SlidesEscapementsRotary Actuators Tool ChangersTool ChangersProduct Name Lead Time: 3-Day 10 Day Consult Factory xG100 Series All Models, All SizesDPDL Series MetricOnlyDPDL-047M-038DPDL -056M-050DPDL-125M-100-B, -E, -V option-CR, -S option,Imperial UnitsDPDS Series MetricOnly DPDS-047M-013 (-B)DPDS-056M-019 (-B)DPDS-088M-025 (-B)DPDS-125M-038 (-B)DPDP-250M-075 (-B)-V option-CR, -S option,Imperial UnitsDPG Series Imperial/Metric DPG-10(M)-1 (-C, -O)DPG-10(M)-2 (-C, -O)DPG-10(M)-3 (-C, -O)DPG-10(M)-4 (-C, -O)-LF, -RF, -NS, -Voption-T option,DPP Series Metric Only DPP-10M-06 (-C)DPP-10M-12 (-C)DPP-14M-15 (-C)DPP-20M-25 (-C)-NS, -V optionRP Series Imperial/MetricRP-5 (M) (-V)RP-10 (M) (-V)RP-11 (M) (-V)RP-12 (M) (-V),RP-15 (M) (-V)RP-17 (M) (-V)RP-18 (M) (-V)-D, -FS, optionRP-P Series Imperial/MetricRP-25P (M)RP-50P (M)RP-100P (M)-V optionRPS Series Imperial/Metric(select models)RPS-11RPS-12 (M) (-C)RPS-17 (M) (-D) (-C)-O, -V optionRPL Series Imperial/Metric RPL-1 (M)RPL-2 (M)RPL-3 (M)RPL-4 (M)-NS, -V optionRPLC Series Imperial/Metric RPLC-1 (M)RPLC-2 (M)RPLC-3 (M)RPLC-4 (M)-NS, -V optionRPM Series MetricOnly RPM-1MRPM-2MRPM-3M-V optionRPMC Series MetricOnly RPMC-1MRPMC-2MRPMC-3M-V optionStandard Product Lead Time with OptionsLead Time: 3-Day 10 Day Consult FactoryDPE-200 Series MetricOnly DPE-200-25N/A N/A Electric Parallel Grippers2-Jaw Parallel GrippersLead Time: 3-Day 10 Day Consult FactoryRTH Series Metric Only RTH-1M (-L)RTH-2M (-L)RTH-3M (-L)RTH-4M (-L)RTH-5M (-L)RTH-6M (-L)-C, -O, -SP-V2-Jaw Heavy-Duty Parallel Grippers3-Jaw Parallel GrippersLead Time: 3-Day 10 Day Consult FactoryDCT Series Metric Only DCT-12MDCT-16M-RE, -V option-SD, -BRRA Series Imperial/Metric(select models)RA-5 (M)RA-6 (M)RA-10RA-15RA-90-V option All other modelsAngular Grippers Lead Time: 3-Day 10 Day Consult FactoryDPW Series Metric Only DPW-250M-2 (-W)DPW-375M-1 (-W)DPW-375M-2 (-W)DPW-500M-1 (-W)DPW-500M-2 (-W)-NS, -V optionRPW Series Metric OnlyRPW-250MRPW-375M-1RPW-375M-2RPW-500M-1RPW-500M-2RPW-625M-1RPW-625M-2RPW-750M-NS, -V option Imperial UnitsRPR Series Metric Only RPR-200Feed EscapementsLead Time: 3-Day 10 Day Consult FactoryRFE Series Metric OnlyRFE-11MRFE-12MRFE-13M-V option-T optionImperial Units Lead Time: 3-Day 10 Day Consult FactoryRR Series Light Duty Imperial/Metric(select models)RR-18-45 (-90) (-180)RR-28-90 (-180)RR-36M-90 (-180)RR-46M-90 (-180)-S, -V option-M (size 36 & 46 units)-CR, -T Option,Other ModelsRR SeriesMedium Duty Metric Only RR56M-180-A-MRR66M-180-A-MRR76M-180-A-M-45, -90,-S, -V option Imperial ModelsRotary ActuatorsLinear SlidesLead Time: 3-Day 10 Day Consult FactoryDLB Series Imperial Only DLB-10-B (-L)-B (-C)DLB-12-B (-L)-B (-C)DLB-16-B (-L)-B (-C)-U option-T, -A,-N,-R, -S, -V options,Metric unitsDLT Series Metric OnlyDLT-08M-B-CDLT-10M-B-B (-C)DLT-12M-B-B (-C)DLT-16M-B-B (-C)-E, -L, -U options(for 3 day Xpress items)DLT-20M-B-B,DLT-25M-B-B-B (08 bearing),-T, -A,-N, -R, -S, -VoptionsDLM Series Metric Only DLM-07M-25DLM-09M-50DLM-12M-25-D, -P options Consult factoryfor other SizesMPS Series Imperial Only MPS-1-1 (-2) (-3) (-4)MPS-2-1 (-2) (-3) (-4)-V optionTool ChangersLead Time: 3-Day 10 Day Consult FactoryRHC Series NPT Ports Only RHC-1M-RRHC-1M-TRHC-2M-RRHC-2M-T-V option All other modelsRQC Series NPT Ports OnlyRQC-200NRQC-400NRQC-800N-LO, -CD, -CPLock Sensing,-E19, -FN ModulesBSPP, BSPTport optionsAll other optionsand modulesRTP Series NPT Ports OnlyRTP-200RTP-400RTP-800-E19,-FN ModulesAll other optionsQC Series NPT Ports OnlyQC-30-E15QC-60-E15QC-150-E15-E26 Module(QC60/QC150 model)E10, E12, -10P,All other optionsTP Series NPT Ports OnlyTP-30-E15TP-60-E15TP-150-E15All other options3 DAYWorkholding •Widest variety of workholding products •High durability and reliability•Flexible solutions for all applications •Custom products for unique requirementsAutomation•Broad range of engineered automation products •Complementary products for modular integration •Unmatched accuracy, reliability and performance •Unparalleled global sales, service and engineering support 1025 Doris RoadAuburn Hills, MI 48326Phone:1.888.DESTACOFax:1.248.836.6901Email:*********************Web: NORTH AMERICADE-STA-CO HeadquartersAuburn Hills, MichiganTel: 1.248.836.6700Toll Free: 1.888.DESTACOMarketing:********************* CustomerService:*************************** Charlevoix, MichiganTel: 1.888.DESTACOCustomerService:*************************** Wheeling, IllinoisTel: 1.800.645.5207CustomerService:*****************Red Wing, Minnesota (Central Research Laboratories) Tel: 1.651.385.2142CustomerService:*****************SOUTH AMERICABrazilTel: +55-11-2923-6640CustomerService:********************ASIAThailandTel: +66-2-326-0812 CustomerService:**************** ChinaTel: +86-21-6081-2888 CustomerService:***************** IndiaTel: +91-80-41123421-426 CustomerService:*****************EUROPEGermanyTel: +49-6171-705-0 CustomerService:****************** FranceTel: +33-1-3996-5000 CustomerService:****************** UKTel: +44-1902-797980 CustomerService:************** SpainTel: +34-936361680 CustomerService:***************** NetherlandsTel: +31-297285332 CustomerService:*******************GLOBAL LOCATIONS© Copyright, 2015 DE-STA-CO. All rights for layout, photos and text rest with the publisherDE-STA-CO. All photomechanical or other reproductions only with our express permission.All sales are based on our terms and conditions of sale, delivery and payment.DSC_AUTOXP-B_0115_US_3.5K SOTAD。
欧安199099产品说明书
Eaton 199099Eaton Moeller® series Rapid Link - Reversing starter, 6.6 A,Sensor input 2, AS-Interface®, S-7.4 for 31 modules, HAN Q4/2,with manual override switchGeneral specificationsEaton Moeller® series Rapid LinkReversing starter199099120 mm270 mm220 mm1.8 kg IEC/EN 60947-4-2CCCUL approvalCERoHSUL 60947-4-2Assigned motor rating: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm at 50 Hz or 1800 min at 60 Hz RAMO5-W200A31-412RS1Product Name Catalog NumberProduct Length/Depth Product Height Product Width Product Weight CertificationsCatalog Notes Model CodeIs the panel builder's responsibility. The specifications for the switchgear must be observed.3 kW6.6 A (at 150 % Overload)480 V AC, 3-phase400 V AC, 3-phase10000 A0 VMeets the product standard's requirements.Is the panel builder's responsibility. The specifications for the switchgear must be observed.Does not apply, since the entire switchgear needs to be evaluated.0 kW2.238 kWMeets the product standard's requirements.0 V-40 °CThermo-clickTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operationKey switch position OFF/RESET Generation change from RA-MO to RAMO 4.0Generation Change RASP4 to RASP5Generation change RAMO4 to RAMO5Generation change from RA-SP to RASP 4.0Configuration to Rockwell PLC for Rapid LinkGeneration Change RA-SP to RASP5Rapid Link 5 - brochureDA-SW-drivesConnect - InstallationshilfeDA-SW-Driver DX-CBL-PC-3M0DA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-drivesConnect - installation helpDA-SW-drivesConnectDA-SW-USB Driver DX-COM-STICK3-KITMaterial handling applications - airports, warehouses and intra-logistics ETN.RAMO5-W200A31-412RS1.edzIL034084ZUramo5_v11.stpramo5_v11.dwgDA-DC-00004184.pdfDA-DC-00004525.pdfDA-DC-00003964.pdfDA-DC-00004523.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-002.eps eaton-bus-adapter-rapidlink-reversing-starter-dimensions-003.eps eaton-bus-adapter-rapidlink-reversing-starter-dimensions-002.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps10.11 Short-circuit ratingRated operational power at AC-3, 380/400 V, 50 HzInput currentRated operational voltageRated conditional short-circuit current, type 1, 480 Y/277 V Rated control supply voltage (Us) at AC, 50 Hz - min10.4 Clearances and creepage distances10.12 Electromagnetic compatibility10.2.5 LiftingRated power at 575 V, 60 Hz, 3-phaseRated power at 460 V, 60 Hz, 3-phase10.2.3.1 Verification of thermal stability of enclosures Rated control supply voltage (Us) at DC - minAmbient storage temperature - minFitted with:Applikasjonsmerknader BrosjyrereCAD model Installeringsinstruksjoner mCAD model SertifiseringsrapporterTegningerElectronic motor protectionKey switch position HANDManual override switchKey switch position AUTOThermistor monitoring PTCShort-circuit releaseOverload cycleAC-53aNumber of pilot lightsRated control supply voltage (Us) at AC, 50 Hz - max0 VSystem configuration typeAC voltagePhase-earthed AC supply systems are not permitted. Center-point earthed star network (TN-S network)10.8 Connections for external conductorsIs the panel builder's responsibility.Coordination class (IEC 60947-4-3)Class 1Rated conditional short-circuit current, type 1, 600 Y/347 V 0 ARated conditional short-circuit current (Iq)10 kAAmbient operating temperature - max55 °CRated operational power at AC-3, 220/230 V, 50 Hz0 kWClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensationFeaturesParameterization: FieldbusDiagnostics and reset on device and via AS-Interface Parameterization: drivesConnectParameterization: drivesConnect mobile (App) Parameterization: KeypadLifespan, electrical10,000,000 Operations (at AC-3)Number of command positions2Electrical connection type of main circuitPlug-in connectionElectrical connection type for auxiliary- and control-current circuit Plug-in connectionRated control supply voltage (Us) at DC - max0 V10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Ambient operating temperature - min-10 °C10.6 Incorporation of switching devices and componentsDoes not apply, since the entire switchgear needs to be evaluated.Current limitation0.3 - 6.6 A, motor, main circuitAdjustable, motor, main circuitCable length10 m, Radio interference level, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 secondsClassCLASS 10 A10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.2.6 Mechanical impactDoes not apply, since the entire switchgear needs to be evaluated.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.10.3 Degree of protection of assembliesDoes not apply, since the entire switchgear needs to be evaluated.Electromagnetic compatibilityClass AVoltage typeDCProduct categoryMotor starterOverload release current setting - min0.3 ARated control voltage (Uc)24 V DC (-15 %/+20 %, external via AS-Interface® plug)Rated operational current (Ie)6.6 AAssigned motor power at 460/480 V, 60 Hz, 3-phase3 HPRated frequency - min47 HzNumber of auxiliary contacts (normally closed contacts)Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V0 APower consumption8 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.On-delay20 - 35 msLifespan, mechanical10,000,000 Operations (at AC-3)Rated operational current (Ie) at 150% overload6.6 AProtocolAS-Interface profile cable: S-7.4 for 31 modulesASIOverload release current setting - max6.6 A10.9.2 Power-frequency electric strengthIs the panel builder's responsibility.Overvoltage categoryIIIDegree of protectionIP65NEMA 12Rated frequency - max63 HzVibrationResistance: According to IEC/EN 60068-2-6Resistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 6 Hz, Amplitude 0.15 mmResistance: 10 - 150 Hz, Oscillation frequencyRated operational power at 380/400 V, 50 Hz - max3 kWAmbient storage temperature - max70 °CShort-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuitRated control supply voltage (Us) at AC, 60 Hz - min0 V10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Rated impulse withstand voltage (Uimp)4000 VConnectionConnections pluggable in power sectionOff-delay20 - 35 ms10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.FunctionsExternal reset possibleTemperature compensated overload protectionOutput frequency50/60 HzMains voltage tolerance380 - 480 V (-15 %/+10 %, at 50/60 Hz)Rated conditional short-circuit current (Iq), type 2, 230 V0 AInterfacesNumber of slave addresses: 31 (AS-Interface®) Specification: S-7.4 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mATypeReversing starter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz, fLN, Main circuit10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Rated control supply voltage (Us) at AC, 60 Hz - max0 VRated operational current (Ie) at AC-3, 380 V, 400 V, 415 V6.6 ARated operational power at 380/400 V, 50 Hz - min0.09 kWModelReversing starterNumber of auxiliary contacts (normally open contacts)Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftAltitudeMax. 2000 mAbove 1000 m with 1 % performance reduction per 100 m Max. 1000 mEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。
产品规格书
产品规格书SPECIFICATION称:OBDII号：M1OO本：V1.1发行日期：2023.07.07一、适用范围：本规格书适用于我司生产的型号为M1OO蓝牙OBDII读码卡。
二、本产品规格书规定了产品的技术要求、试验方法、标志、包装、运输及存储要求。
本规格书适用于设计定制与出货检验，在生产检验，定制检验和质量一致性检验时，作为质量鉴定检验的依据。
三、产品参数：通讯方式:蓝牙4.0主控芯片：P1CI8F25K80软件平台:支持Android/IOS工作电压:9V~16V工作电流:35mA待机电流:25mA工作温度：-40°C~85°C工作湿度:小于60%产品尺寸:47mm*46mm*24mm四.产品特点：1 .软件可以进行以下操作：读取错误诊断码一一通用和厂家特用的，并显示他们的含义（数据库拥有超过3000个的通用代码定义）清除错误码并关灭MI1（〃检查引擎〃指示灯）显示电流传感器数据，包含：引擎每分钟转速（RPM）计算后的负荷值冷却液温度燃料系统状态车速短期燃料情况长期燃料情况进气歧管压力喷油提前时间进气温度空气气流速度节流阀绝对位置与短期燃料状态关联的氧气探测电压燃料系统状态燃料压力燃油消耗量监测还有很多其他数据……软件的未来特点：数据图表显示和记录日志冻帧数据连续和不连续氧气探测结果五.协议支持：OBDII支持的协议：1. SAEJ1850PWM(41.6Kbaud)2. SAEJ1850VPW(10.4Kbaud)3. ISO9141-2(5baudinit z10.4Kbaud)4. ISO14230-4KWP(5baudinit z10.4Kbaud)5. ISO14230-4KWP(fastinit z10.4Kbaud)6. ISO15765-4CAN(1ibitID,500Kbaud)7. ISO15765-4CAN(29bitID,500Kbaud)8. ISO15765-4CAN(1ibitID,250Kbaud)9. ISO15765-4CAN(29bitID,250Kbaud)六、软件平台：1.兼容软件IoS版本:M100APP安卓版本:M1OOAPP七、产品说明：1.产品外观：OBDI1产品规格书。
790 产品规格承认书
产品规格承认书SPECIFICATION FOR APPROVAL电动自行车LED类显示器LED DISPLAY OF E-BICYCLE型号（MODEL）:790客户名称Customer Name: 客户地址Address: 客户确认（签字并盖章）Approved:内容 CONTENT1.功能介绍 Function Introduction2.外观尺寸、材料与图片 Size、Material & Photos3.技术参数及可靠性 Techical parameters & Reliability4.接插件与引线 Plug & Wire5.可靠性测试 Dependability Testing6.生产工艺保证品质 Process & Quality7.贴膜及型号标识印制 LOGO & Model prints8.包装要求 Package Requirement9.其它 Others拟制Originality总工审核Auditing副总经理批准SIMI-G.M.总经理批准G.M.天津嘉特机电技术有限公司Tianjin Jiate Mechnical & Electrical Technology Co., Ltd Page 1 of 14一、功能介绍（Function introduce）790系列仪表是适配电动自行车使用的LED类显示器,是780系列的升级版本。
790 LED series display is suitable for E-BICYCLE，and theupgraded version of the 780 series.所控制的对象(Control Object)：1、按钮控制电动车控制器的内部工作电源。
ON状态时提供控制器内部0－300mA电流（max：300mA）,OFF状态时，仪表耗电小于1uA。
The button of ON/OFF will control the power supply of thecontrollor for the E-Bicycle .When the status is ON , thedisplay will supply the current of 0-300mA for the controllor.When the status is OFF, the total current will be less than1uA.2、按钮三档循环切换控制电动车控制器输出PWM的最高值,以改变电动车速度。
MGate系列产品发布说明书
MGate Manager for MGate Series Release NotesSupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Supports cybersecurity features for the MGate MB3000 Series.• User parameter in GSD file PXC_06CC.gsd are incorrectly parsed for MGate 5101-PBM-MN/5102-PBM-PN.• User parameter in GSD file si04806a.gsd are incorrectly parsed for MGate 5101-PBM-MN/5102-PBM-PN.• GSD management failed to add SE100E2E.GSD for MGate 5101-PBM-MN/5102-PBM-PN.EnhancementsWindows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T,MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Added username login function for MGate MB3000 Series, MGate 5101-PBM-MN, MGate 5102-PBM-PN, and MGate 5105-MB-EIP.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Supports cybersecurity features for MGate 5101-PBM-MN, MGate 5102-PBM-PN, and MGate 5105-MB-EIP.• Added EtherNet/IP encapsulation inactivity timeout and configuration instance settings for MGate 5105-MB-EIP.• MB3270 cannot be configured in high-latency network environments.EnhancementsWindows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T,MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Supports Modbus fault protection function for MGate 5101-PBM-MN and MGate 5105-MB-EIP.• Supports EtherNet/IP fault protection function for MGate 5105-MB-EIP.• Supports accessible IP for MGate 5102-PBM-PN.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• MGate 5101-PBM-MN / 5102-PBM-PN cannot communicate with WAGO 750-303 due to incorrect parsing.• Supports EIP3000 Forward open connection path.• MGate 5101-PBM-MN/5102-PBM-PN cannot add SIE180BB.GSD (for Siemens SIMEAS P).• MGate 5101-PBM-MN/5102-PBM-PN cannot remove GSD file with read-only attribute.• MGate 5105-MB-EIP cannot be configured for some version.EnhancementsWindows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T,MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Supports auto device routing for MGate MB3270, MB3280, and MB3480 Series.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Modified the MG4101 I/O mapping page, dynamic GSD export, and I/O data view.• Supports MB3180 Web Console.• Added MB3000 Modbus TCP listen port setting.• Multi-language support.• MGate manager does not modify broadcast IP after changing IP and netmask settings for MGate 5101/5102/5105 devices.• Updated the PNIO version of MGate 5102 GSDML.EnhancementsWindows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T,MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Supports Windows 10.• MGate 4101 Modbus Fault Protection setting.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsWindows 2000, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008,Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate MB3170-M-SC, MGate MB3170-M-ST, MGate MB3170-S-SC, MGate MB3170I-M-SC, MGate MB3170I-S-SC, MGate MB3170-M-SC-T, MGate MB3170-M-ST-T, MGate MB3170-S-SC-T, MGate MB3170I-M-SC-T, MGate MB3170I-S-SC-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T,MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Supports MGate MB3170-M-SC, MB3170-M-ST, MB3170-S-SC, MB3170I-M-SC, and MB3170I-S-SC.• Supports Modbus routing by TCP port, IP address, and multi-range slave ID.• Supports exporting MB3000 monitor log to CSV format.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Supports PROFIBUS module names over 32 characters long. The displayed module name will be truncated when its length exceeds the 32-character limitation specified by the PROFIBUS GSD specification.• Modified the file extension of MB3000 offline configuration to "cfg".• "Monitor" function of device will faileif the device address is translated (NAT) by a router.• GSD Management cannot add a GSD file with long arguments.• Allows Modbus command 06 with swap being set to "Byte".EnhancementsWindows 2000, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008,Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T, MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Supports Windows 8.1, Windows Server 2012 R2.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs Fixed• Language button and dialogs would always be displayed in English instead of the user-specified language.• Auto setting file names during saving/loading files.• Changed the message of "Modbus Tcp" to "Modbus TCP".• Add devices to the device list by searching using the “Specify IP Search” option.• Fewer error messages will be displayed when broadcast search occurs just after powering on an MGate that uses DHCP.• Wrong firmware version returned by dsc_GetKernelInfo of MGCI.• Wrong tab order.• Unlimited length for name of the MGate.• Incorrect display of "Unlock" on the MGate device list.EnhancementsWindows 2000, Windows 7, Windows 8, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T, MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• Configuration pages can now be accessed by double-clicking an MGate from the MGate list.• Added a Group Box to separate mode and serial settings for each port.New FeaturesN/AN/ASupported Operating SystemsNotesChangesApplicable ProductsBugs FixedN/AN/AEnhancementsWindows 2000, Windows 7, Windows 8, Windows Server 2003, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Vista, Windows XPMGate MB3180, MGate MB3280, MGate MB3480, MGate MB3170, MGate MB3170I, MGate MB3270,MGate MB3270I, MGate MB3170-T, MGate MB3170I-T, MGate MB3270-T, MGate MB3270I-T, MGate 5101-PBM-MN, MGate 5101-PBM-MN-T, MGate 5105-MB-EIP, MGate 5105-MB-EIP-T, MGate 5102-PBM-PN, MGate 5102-PBM-PN-T, MGate EIP3170, MGate EIP3170I, MGate EIP3270, MGate EIP3270I, MGate EIP3170-T, MGate EIP3170I-T, MGate EIP3270-T, MGate 4101-MB-PBS, MGate 4101I-MB-PBS, MGate 4101-MB-PBS-T, MGate 4101I-MB-PBS-T• First release.New FeaturesN/AN/A。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
全网管控 内置全网管控管理端，可以同所有支持全网管控功能的交换机一起，构建“可管、可控、全透明局 域网”。（详细信息，请参考有关全网管控专题资料！）
■ 典型应用
一、企业内部员工上网行为管理 ME908 可以在企业内部部署为网关，连接 互联网，内网用户可以通过 ME908 访问互 联网。同时根据管理需要，设定内网用户 对 P2P、网页、视频、网络游戏以及 IM 等 网络应用的访问和使用权限，提高员工工 作效率。
腾讯 QQ 管理 允许封锁 QQ 使用，指定号码放行，实时 显示当前所有使用的 QQ 号码，详细记录 局域网所有 QQ 号码详细登录日志。
一键阻断功能 允许用户一键封锁“P2P 软件”、“网络游 戏”、“分类网址”等各种网络应 用。
■ 亮点功能
二、总部和分支机构间 VPN 网络互连 ME908 可作为 VPN 接入端用于分支机构 跟总部之间建立 LAN TO LAN VPN 网 络。同时又可作为 PPTP VPN 服务端，让 出差用户直接拨入公司局域网，方便灵活 的享受 VPN 网络的便利。
三、酒店、宾馆、出租屋网关设备 ME908 可作为酒店、宾馆、出租屋的网关 设备，利用其 PPPOE SERVER 功能对局 域网用户进行管理，同时，利用智能流控 和应用管控功能进行带宽自动分配和网络 应用程序管理。
应用管控 在“一键封锁”的基础上，允许设定针 对特定对象、在特定时间内的分应用详 细管控规则。可以选择封锁该应用，也 可以放行该应用。是对“一键封锁”功 能的进一步细化设定。
ME908
智能流控 根据用户带宽使用状况，自动控制每主机可用带宽，根据网络应用所属业务种类，自动调整优先级。
智能识别 “智能识别”技术是对一种新型精细化网络应用识别技术的简称，此项技术，可使传统路由器以极 低的硬件资源消耗为代价，具备识别几百种网络应用和上千万个网站的能力。自动统计局域网内的 各种网络应用具体占用的带宽状况，并自动生成饼状图。
并发连接数 8000 条 PPTP VPN 8条 功耗 10W 工作环境
0℃~40℃；20%~85%非凝露
ME908
■ 亮点功能
对象管理 在 WEB 页面中可以自定义“地址组”、“时间表”等管控对象，管理更加方便灵活。
网站管理 支持“黑名单”、“白名单”、“文件类型过 滤”、“URL 关键字过滤”、“WEB 提交管 控”等功能，方便管理用户的网站访问权 限。
ME908
产品特性
★ 行为管理系统 ★ 安全联动系统 ★ 智能识别系统 ★ 智能流控系统 ★ 1-4WAN 弹 性 端 口 ★ VPN 网 络 支 持 ★ PPPOE 服 务 端 ★ 计费系统 ★ ARP 病 毒 防 护 ★ 软件防火墙系统
小型上网行为管理设备
■ 硬件规格
广域网接口（WAN）
最少 1 个，最多 4 个 10/100BASE-T RJ45 自适应以太网端口 支持半双工、全双工、自适应工作模式、支持 MDI/MDI-X 自适应
局域网接口（LAN）
最少 1 个，最多 4 个 10/100BASE-T RJ45 自适应以太网端口 支持半双工、全双工、自适应工作模式、支持 MDI/MDI-X 自适应
CPU 266MHZ 32 位 POWERPC 网络处理器
内存 128MB（SDRAM）
FLASH 16MB
外形尺寸 280MM*170MM*44MM PPPOE 服务数 50 个 工作电压 220V AC 散热方式 无风扇被动散热式
ME908 MS2326
更多产品资料，请访问网月科技官方网站