SNJ54AHC86FK中文资料
AHC14
IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandInterface Digital ControlLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityLow Power TelephonyWirelessVideo&ImagingWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9680201Q2A ACTIVE LCCC FK201TBD POST-PLATE N/A for Pkg Type 5962-9680201QCA ACTIVE CDIP J141TBD A42SNPB N/A for Pkg Type 5962-9680201QDA ACTIVE CFP W141TBD A42N/A for Pkg Type 5962-9682001QCA ACTIVE CDIP J141TBD A42SNPB N/A for Pkg Type 5962-9682001QDA ACTIVE CFP W141TBD A42N/A for Pkg Type SN74AHC14D ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DBLE OBSOLETE SSOP DB14TBD Call TI Call TISN74AHC14DBR ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DBRE4ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DBRG4ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DGVR ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DGVRE4ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DGVRG4ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14DRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeSN74AHC14NE4ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU N/A for Pkg TypeSN74AHC14NSR ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14NSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14PW ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14PWE4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14PWG4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC14PWLE OBSOLETE TSSOP PW14TBD Call TI Call TISN74AHC14PWR ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC14PWRE4ACTIVE TSSOP PW142000Green(RoHS&CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)no Sb/Br)SN74AHC14PWRG4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHC14RGYR ACTIVE QFN RGY141000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEARSN74AHC14RGYRG4ACTIVE QFN RGY141000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SNJ54AHC08J ACTIVE CDIP J141TBD A42SNPB N/A for Pkg Type SNJ54AHC08W ACTIVE CFP W141TBD A42N/A for Pkg Type SNJ54AHC14FK ACTIVE LCCC FK201TBD POST-PLATE N/A for Pkg Type SNJ54AHC14J ACTIVE CDIP J141TBD A42SNPB N/A for Pkg Type SNJ54AHC14W ACTIVE CFP W141TBD A42N/A for Pkg Type (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS),Pb-Free(RoHS Exempt),or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free(RoHS Exempt):This component has a RoHS exemption for either1)lead-based flip-chip solder bumps used between the die and package,or2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free(RoHS compatible)as defined above.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.TAPE AND REEL INFORMATIONDevice Package Pins Site ReelDiameter(mm)ReelWidth(mm)A0(mm)B0(mm)K0(mm)P1(mm)W(mm)Pin1QuadrantSN74AHC14DBR DB14MLA330168.2 6.6 2.51216Q1 SN74AHC14DGVR DGV14MLA33012 6.8 4.0 1.6816Q1 SN74AHC14DR D14FMX33016 6.59.0 2.1816Q1 SN74AHC14DR D14MLA33016 6.59.0 2.1816Q1 SN74AHC14NSR NS14MLA330168.210.5 2.51216Q1 SN74AHC14PWR PW14MLA330127.0 5.6 1.6812Q1 SN74AHC14RGYR RGY14MLA18012 3.85 3.85 1.35812Q1TAPE AND REEL BOX INFORMATIONDevice Package Pins Site Length(mm)Width(mm)Height(mm) SN74AHC14DBR DB14MLA342.9336.628.58SN74AHC14DGVR DGV14MLA342.9336.620.64SN74AHC14DR D14FMX342.9336.628.58SN74AHC14DR D14MLA342.9336.628.58SN74AHC14NSR NS14MLA342.9336.628.58SN74AHC14PWR PW14MLA342.9336.620.64SN74AHC14RGYR RGY14MLA190.0212.731.75PACKAGE MATERIALS INFORMATION16-Jun-2007Pack Materials-Page3IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers AudioData Converters AutomotiveDSP BroadbandInterface Digital ControlLogic MilitaryPower Mgmt Optical NetworkingMicrocontrollers SecurityRFID TelephonyLow Power Video&ImagingWirelessWirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。
SN74AHCT74DBRG4中文资料
IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedPACKAGING INFORMATIONOrderableDevice Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-9686101Q2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type 5962-9686101QCA ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type 5962-9686101QDA ACTIVE CFP W 141TBD A42N /A for Pkg Type SN74AHCT74D ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DBLE OBSOLETE SSOP DB 14TBDCall TI Call TISN74AHCT74DBR ACTIVE SSOP DB 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DBRE4ACTIVE SSOP DB 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DBRG4ACTIVE SSOP DB 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DE4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DG4ACTIVE SOIC D 1450Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DGVR ACTIVE TVSOP DGV 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DGVRE4ACTIVE TVSOP DGV 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DGVRG4ACTIVE TVSOP DGV 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DR ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DRE4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74DRG4ACTIVE SOIC D 142500Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74N ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74AHCT74NE4ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74AHCT74NSR ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74NSRE4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74NSRG4ACTIVE SO NS 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74PW ACTIVE TSSOP PW 1490Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74PWE4ACTIVE TSSOP PW 1490Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74PWG4ACTIVE TSSOP PW 1490Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74PWLE OBSOLETE TSSOP PW 14TBDCall TI Call TISN74AHCT74PWR ACTIVE TSSOP PW 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74PWRE4ACTIVETSSOPPW142000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIM4-Jun-2007Orderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)SN74AHCT74PWRG4ACTIVE TSSOP PW 142000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT74RGYR ACTIVE QFN RGY 141000Green (RoHS &no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SN74AHCT74RGYRG4ACTIVE QFN RGY 141000Green (RoHS &no Sb/Br)CU NIPDAULevel-2-260C-1YEARSNJ54AHCT74FK ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type SNJ54AHCT74J ACTIVE CDIP J 141TBD A42SNPB N /A for Pkg Type SNJ54AHCT74WACTIVECFPW141TBDA42N /A for Pkg Type(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.4-Jun-2007TAPE AND REELINFORMATIONPACKAGE MATERIALS INFORMATION16-Jun-2007DevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74AHCT74DBR DB 14MLA 330168.2 6.6 2.51216Q1SN74AHCT74DGVR DGV 14MLA 33012 6.8 4.0 1.6816Q1SN74AHCT74DR D 14MLA 33016 6.59.0 2.1816Q1SN74AHCT74NSR NS 14MLA330168.210.5 2.51216Q1SN74AHCT74PWR PW 14MLA 330127.0 5.6 1.6812Q1SN74AHCT74RGYRRGY14MLA180123.853.851.35812Q1TAPE AND REEL BOX INFORMATIONDevice Package Pins Site Length (mm)Width (mm)Height (mm)SN74AHCT74DBR DB 14MLA 342.9336.628.58SN74AHCT74DGVR DGV 14MLA 342.9336.620.64SN74AHCT74DR D 14MLA 342.9336.628.58SN74AHCT74NSR NS 14MLA 342.9336.628.58SN74AHCT74PWR PW 14MLA 342.9336.620.64SN74AHCT74RGYRRGY14MLA190.0212.731.7516-Jun-200716-Jun-2007IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityRFID Telephony /telephonyLow Power /lpw Video&Imaging /videoWirelessWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。
Han 接触器手动紧固工具及相关产品参数说明书
90·1ContentsPage Hand crimping tools for Han ® standard contacts .....................................90.4Hand crimping tools for fibre optic contacts .............................................90.9Hand crimping tools for Han-Fast ® Lock contacts ...................................90.10Hand crimping tools for wire end ferrules ................................................90.11Hand crimping tools for D-Sub contacts ..................................................90.12Hand crimping tools for coaxial contacts .................................................90.13Pneumatic crimping tool ..........................................................................90.15Hydraulic crimping tools for Han ® TC high current contacts ....................90.16Crimping machine TC-C01 ......................................................................90.18Crimping machine TK-M ..........................................................................90.20Crimping machine BK ..............................................................................90.22Panel punch .............................................................................................90.24Assembly tools ........................................................................................90.25Removal tools ..........................................................................................90.29Stripping tools ..........................................................................................90.32ToolsHan ® tools1) TK-M basic machine 09 98 000 6900 is required2) depending on the wire3) only with modification 09 98 503 6900Features• Basic unit of compact construction for pre-stripped wires (stranded wire)• Easy handling due to well-arranged design• for individual, turned male and female contacts• Selective processing of male and female contacts• Automatic contact feed• Reproducible, top quality gas-tight crimp connections• Non-slip, anti-vibration adjustable feet for setting the height • Low noise level• With carrying handle• Removable electric and pneumatic supply connections • Maintenance interval counter• Minimal setup effort• Stepless adjustment of the crimping depth• Low follow-up costs for maintenance and repair• Easy replacement of wearing components DetailsNominal voltage, max. 230 VNominal frequency 50 HzPower consumption ca.0.2 kWPressure ca.6 barControl system PLCWork cycle trigger FootswitchWork cycle 1 sNoise level ca.62 dBCrimp type Four-point crimpingContact feed Vibratory bowl feedStroke counters Resettable daily counter and permanent counterDimensions 345 x 230 x 400 mmWeight ≥24 kgPack contents:2.0 m connection cable and grounding plug, 2.0 m pneumatic hose,quick-release coupling and N6 plugin nipple, footswitch,carrying handle,operating instructions,declaration of conformityTools90Features• Basic unit of compact construction• Fast stripping and crimping in one operating step• Easy handling due to well-arranged design• Touchscreen controlling• for individual, turned male and female contacts• Selective processing of male and female contacts• Contact magazine with filling control• Reproducible, top quality gas-tight crimp connections• Infinitely variable adjustment parameters (stripping depth, stripping length, crimping depth, crimp contact feed rate)• Rotatable vibration feeder and actuator in basic unit• Low noise level• for oil-free compressed air• Minimal setup effort• Low maintenance costs DetailsDrive electro-pneumaticNominal voltage, max. 230 VNominal frequency 50 HzPower consumption ca.0.75 kWPressure ca.6 barCompressed air connection 3 dm³ / work cycleControl system PLCWork cycle trigger sensorWork cycle 1.5 sNoise level <70 dBCrimp type Four-point crimpingContact feed Vibratory bowl feedStroke counters Resettable daily counte, total counter, operating hours, maintenance counter and quantity preselection Dimensions 580 x 470 x 470 mmWeight <60 kgPack contents:one mounted interchangeable unit,2.0 m connection cable and grounding plug,2.0 m pneumatic hose with plug-in nipple N6,plug gauges for setting the crimping,centering bush for positioning the plug gauges,draw for insulation remains,drawer for holding the contacts when the magazine is emptied, tool set for setting,1 set of stripping blades,operating instructions,declaration of conformityToolsCrimping machine TK-M90Features• Fast stripping and crimping in one operating step• Easy handling due to quick change tool and stripper• Suitable for standard D-Sub crimp contacts• Selective processing of male and female contacts• Hand wheel for manual adjustments• Maintenance-friendly through needle bearing rail• Automatic exhaust of the isolation remainders• Reproducible, top quality gas-tight crimp connections• With crimp force monitor• Setting parameters with raster rotary button (depth of insula-tion stripping, length of insulation stripping, crimping heigth on wire, crimping heigth on isulation, wire retainer position, band thrust and wire position in the crimp contact)• Non slip and anti-vibration feet• Low noise level• for oil-free compressed air• Low maintenance costs• V-blades for special wires on request DetailsDrive electro-pneumaticNominal voltage, max. 230 VNominal frequency 50 HzPower consumption 0.75 kWPressure 6 barControl system PLCStripping device type 514Suction apparatus 2000.0900.20Work cycle trigger sensorWork cycle 0.35 sNoise level 85 dBIllumination integrated tool light 20001326Motor speed 440 –2000 rpmStroke counters Resettable daily counter and permanent counter Dimensions 690 (with a contact reel: 1400) x 420 x 430 mm Weight <72 kgPack contents:with role owner and guide plate,2.0 m connection cable and grounding plug,2.0 m pneumatic hose with plug-in nipple N9,oiler bottle for the lubricating of the crimping contacts,tool set for setting,1 set of stamps for wire and isolation-crimp,1 anvil one-piece for wire and isolation-crimp,1 set of stripping blades,1 litre of contact oil,operating instructions,declaration of conformityTools90。
SN54AHCT541中文资料
PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9685801Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9685801QRA ACTIVE CDIP J201TBD Call TI Level-NC-NC-NC 5962-9685801QSA ACTIVE CFP W201TBD Call TI Level-NC-NC-NC SN74AHCT541DBLE OBSOLETE SSOP DB20TBD Call TI Call TISN74AHCT541DBR ACTIVE SSOP DB202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541DBRE4ACTIVE SSOP DB202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541DW ACTIVE SOIC DW2025Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541DWE4ACTIVE SOIC DW2025Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541DWR ACTIVE SOIC DW202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541DWRE4ACTIVE SOIC DW202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74AHCT541NE4ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74AHCT541NSR ACTIVE SO NS202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541NSRE4ACTIVE SO NS202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541PW ACTIVE TSSOP PW2070Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541PWE4ACTIVE TSSOP PW2070Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT541PWLE OBSOLETE TSSOP PW20TBD Call TI Call TISN74AHCT541PWR ACTIVE TSSOP PW202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541PWRE4ACTIVE TSSOP PW202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT541PWRG4ACTIVE TSSOP PW202000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ54AHCT541FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54AHCT541J ACTIVE CDIP J201TBD Call TI Level-NC-NC-NC SNJ54AHCT541W ACTIVE CFP W201TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
纽扣电池型号大全
纽扣电池型号大全纽扣电池是一种常见的小型电池，通常用于手表、遥控器、玩具等小型电子设备中。
由于其体积小巧、使用方便，因此备受消费者青睐。
然而，市面上纽扣电池的型号繁多，让人眼花缭乱。
为了帮助大家更好地了解纽扣电池的型号，本文将为大家整理一份纽扣电池型号大全，希望能够对大家有所帮助。
一、CR系列。
1. CR2032，这是一种常见的纽扣电池型号，直径20mm，厚度3.2mm，容量约为220mAh，主要用于计算器、手表、体重秤等设备中。
2. CR2025，直径20mm，厚度2.5mm，容量约为160mAh，适用于各类小型电子设备。
3. CR2016，直径20mm，厚度1.6mm，容量约为90mAh，常用于电子玩具、遥控器等设备。
二、LR系列。
1. LR44，LR44是一种碱性纽扣电池，直径11.6mm，厚度5.4mm，容量约为150mAh，常用于手表、遥控器等设备。
2. LR41，直径7.9mm，厚度3.6mm，容量约为25mAh，适用于辅助听力设备、手表等小型电子产品。
三、AG系列。
1. AG13，AG13是一种银氧电池，直径11.6mm，厚度5.4mm，容量约为150mAh，常用于手表、玩具等设备。
2. AG10，直径7.9mm，厚度3.1mm，容量约为70mAh，适用于小型计算器、手表等设备。
四、SR系列。
1. SR626SW，SR626SW是一种银氧电池，直径6.8mm，厚度2.6mm，容量约为28mAh，常用于手表、电子玩具等设备。
2. SR621SW，直径6.8mm，厚度2.1mm，容量约为13mAh，适用于小型电子设备。
五、其他型号。
除了以上列举的常见型号外，还有一些其他型号的纽扣电池，如SR920SW、SR927W等，它们分别适用于不同的小型电子设备。
总结。
通过本文的介绍，相信大家对纽扣电池的型号有了更清晰的了解。
在选购纽扣电池时，建议大家根据设备的需求选择合适的型号和规格，避免因选错电池型号而导致设备无法正常使用。
SNJ54LS14FK中文资料
InputV T OutputPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9665801Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9665801QCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9665801QDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC 5962-9665801VCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9665801VDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC JM38510/31302BCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SN5414J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SN54LS14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NCSN7414D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DE4ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414DRE4ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN7414N3OBSOLETE PDIP N14TBD Call TI Call TISN7414NSR ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7414NSRE4ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DBR ACTIVE SSOP DB142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DBRE4ACTIVE SSOP DB142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS14N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS14N3OBSOLETE PDIP N14TBD Call TI Call TISN74LS14NE4ACTIVE PDIP N1425TBD Call TI Call TISN74LS14NSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SNJ5414J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NCSNJ5414W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC SNJ54LS14FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54LS14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SNJ54LS14W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC (1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74AHCT14NSRG4中文资料
PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9680101Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9680101QCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9680101QDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC 5962-9680101VCA ACTIVE CDIP J141TBD Call TI Call TI5962-9680101VDA ACTIVE CFP W141TBD Call TI Call TISN74AHCT14D ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DBLE OBSOLETE SSOP DB14TBD Call TI Call TISN74AHCT14DBR ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DBRE4ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DGVR ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DGVRE4ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14DRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74AHCT14NSR ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14NSRE4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14NSRG4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14PW ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14PWE4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14PWG4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT14PWLE OBSOLETE TSSOP PW14TBD Call TI Call TISN74AHCT14PWR ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14PWRE4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT14PWRG4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT14RGYR ACTIVE QFN RGY141000Green(RoHS&CU NIPDAU Level-2-260C-1YEAROrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)no Sb/Br)SNJ54AHCT14FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54AHCT14J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SNJ54AHCT14W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74AHC244DWRE4资料
PACKAGING INFORMATIONOrderable DeviceStatus (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-9678201Q2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type 5962-9678201QRA ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type 5962-9678201QSA ACTIVE CFP W 201TBD A42N /A for Pkg Type 5962-9678201SA ACTIVE CFP W 20TBD Call TI Call TI5962-9678201VRA ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type 5962-9678201VSA ACTIVE CFP W 201TBD A42N /A for Pkg Type SN74AHC244DBLE OBSOLETE SSOP DB 20TBDCall TI Call TISN74AHC244DBR ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DBRE4ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DBRG4ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DGVR ACTIVE TVSOP DGV 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DGVRE4ACTIVE TVSOP DGV 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DGVRG4ACTIVE TVSOP DGV 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DW ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DWE4ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DWG4ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DWR ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DWRE4ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244DWRG4ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244N ACTIVE PDIP N 2020Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74AHC244NE4ACTIVE PDIP N 2020Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74AHC244NSR ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244NSRE4ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244NSRG4ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244PW ACTIVE TSSOP PW 2070Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244PWE4ACTIVE TSSOP PW 2070Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244PWG4ACTIVE TSSOP PW 2070Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244PWLEOBSOLETETSSOPPW20TBDCall TICall TI24-Sep-2007Orderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball Finish MSL Peak Temp (3)SN74AHC244PWR ACTIVE TSSOP PW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244PWRE4ACTIVE TSSOP PW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC244PWRG4ACTIVE TSSOP PW 202000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIMSNJ54AHC244FK ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type SNJ54AHC244J ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type SNJ54AHC244WACTIVECFPW201TBDA42N /A for Pkg Type(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--TheMoisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.24-Sep-2007TAPE AND REEL BOXINFORMATIONDevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74AHC244DBR DB 20SITE 41330168.27.5 2.51216Q1SN74AHC244DGVR DGV 20SITE 41330127.0 5.6 1.6812Q1SN74AHC244DWR DW 20SITE 413302410.813.0 2.71224Q1SN74AHC244NSR NS 20SITE 41330248.213.0 2.51224Q1SN74AHC244PWRPW20SITE 41330166.957.11.6816Q122-Sep-2007DevicePackage Pins Site Length (mm)Width (mm)Height (mm)SN74AHC244DBR DB 20SITE 41346.0346.00.0SN74AHC244DGVR DGV 20SITE 41346.0346.00.0SN74AHC244DWR DW 20SITE 41346.0346.00.0SN74AHC244NSR NS 20SITE 41346.0346.00.0SN74AHC244PWRPW20SITE 41346.0346.00.022-Sep-2007IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered rmation of third parties may be subject to additional restrictions.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityRFID Telephony /telephonyLow Power /lpw Video&Imaging /videoWirelessWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。
SN54LS244中文资料
PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-7801201VRA ACTIVE CDIP J201None Call TI Level-NC-NC-NC 5962-7801201VSA ACTIVE CFP W201None Call TI Level-NC-NC-NC 7705701RA ACTIVE CDIP J201None Call TI Level-NC-NC-NC 7705701SA ACTIVE CFP W201None Call TI Level-NC-NC-NC 78012012A ACTIVE LCCC FK201None Call TI Level-NC-NC-NC 7801201RA ACTIVE CDIP J201None Call TI Level-NC-NC-NC 7801201SA ACTIVE CFP W201None Call TI Level-NC-NC-NC JM38510/32401B2A ACTIVE LCCC FK201None Call TI Level-NC-NC-NC JM38510/32401BRA ACTIVE CDIP J201None Call TI Level-NC-NC-NC JM38510/32401BSA ACTIVE CFP W201None Call TI Level-NC-NC-NC JM38510/32402B2A ACTIVE LCCC FK201None Call TI Level-NC-NC-NC JM38510/32402BRA ACTIVE CDIP J201None Call TI Level-NC-NC-NC JM38510/32402BSA ACTIVE CFP W201None Call TI Level-NC-NC-NC JM38510/32403B2A ACTIVE LCCC FK201None Call TI Level-NC-NC-NC JM38510/32403BRA ACTIVE CDIP J201None Call TI Level-NC-NC-NC JM38510/32403BSA ACTIVE CFP W201None Call TI Level-NC-NC-NC JM38510/32403SRA ACTIVE CDIP J201None Call TI Level-NC-NC-NC JM38510/32403SSA ACTIVE CFP W201None Call TI Level-NC-NC-NC SN54LS240J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SN54LS241J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SN54LS244J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SN54S240J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SN54S241J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SN54S244J ACTIVE CDIP J201None Call TI Level-NC-NC-NCSN74LS240DW ACTIVE SOIC DW2025Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74LS240DWR ACTIVE SOIC DW202000Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74LS240J OBSOLETE CDIP J20None Call TI Call TISN74LS240N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS240N3OBSOLETE PDIP N20None Call TI Call TISN74LS240NSR ACTIVE SO NS202000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS241DW ACTIVE SOIC DW2025Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74LS241DWR ACTIVE SOIC DW202000Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74LS241J OBSOLETE CDIP J20None Call TI Call TISN74LS241N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS241N3OBSOLETE PDIP N20None Call TI Call TISN74LS241NSR ACTIVE SO NS202000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN74LS244DBR ACTIVE SSOP DB202000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74LS244DW ACTIVE SOIC DW2025Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74LS244DWR ACTIVE SOIC DW202000Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74LS244J OBSOLETE CDIP J20None Call TI Call TISN74LS244N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74LS244N3OBSOLETE PDIP N20None Call TI Call TISN74LS244NSR ACTIVE SO NS202000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN74S240DW ACTIVE SOIC DW2025Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74S240DWR ACTIVE SOIC DW202000Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74S240N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74S240N3OBSOLETE PDIP N20None Call TI Call TISN74S241DW ACTIVE SOIC DW2025Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74S241DWR ACTIVE SOIC DW202000Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74S241J OBSOLETE CDIP J20None Call TI Call TISN74S241N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74S241N3OBSOLETE PDIP N20None Call TI Call TISN74S244DW ACTIVE SOIC DW2025Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74S244DWR ACTIVE SOIC DW202000Pb-Free(RoHS)CU NIPDAU Level-2-250C-1YEAR/Level-1-235C-UNLIMSN74S244J OBSOLETE CDIP J20None Call TI Call TISN74S244N ACTIVE PDIP N2020Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN74S244N3OBSOLETE PDIP N20None Call TI Call TISNJ54LS240FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NC SNJ54LS240J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SNJ54LS240W ACTIVE CFP W201None Call TI Level-NC-NC-NC SNJ54LS241FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NC SNJ54LS241J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SNJ54LS241W ACTIVE CFP W201None Call TI Level-NC-NC-NC SNJ54LS244FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NC SNJ54LS244J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SNJ54LS244W ACTIVE CFP W201None Call TI Level-NC-NC-NC SNJ54S240FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NC SNJ54S240J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SNJ54S240W ACTIVE CFP W201None Call TI Level-NC-NC-NC SNJ54S241FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NCOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SNJ54S241J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SNJ54S241W ACTIVE CFP W201None Call TI Level-NC-NC-NC SNJ54S244FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NC SNJ54S244J ACTIVE CDIP J201None Call TI Level-NC-NC-NC SNJ54S244W ACTIVE CFP W201None Call TI Level-NC-NC-NC(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-May not be currently available-please check /productcontent for the latest availability information and additional product content details.None:Not yet available Lead(Pb-Free).Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean"Pb-Free"and in addition,uses package materials that do not contain halogens, including bromine(Br)or antimony(Sb)above0.1%of total product weight.(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
HM54-60R86VLF中文资料
Heating (1) Isat (2) Current (Adc) (Adc)
32 32 33 33 32 32 31 31 27 27 35 35 32 32 33 33 42 42 32 32 27 27 41 41
DCR (3) mΩ Max.
1.15 1.15 0.70 0.70 0.75 0.75 1.1 1.1 1.6 1.6 1.1 1.1
Fig. 2 2 2 2 2
L .570 14.48 .610 15.50 .640 16.25 .690 17.53 .760 19.30
W .570 14.48 .610 15.50 .640 16.25 .690 17.53 .760 19.30
Ht .260 6.61 .295 7.50 .300 7.61 .380 9.65 .360 9.14
.142±.020 3.6±0.5 P± .020 0.5
Refer to Specifications table for ‘A’ & ‘P’ dimensions of each model.
28
MAGNETIC COMPONENTS SELECTOR GUIDE 2007/08 EDITION
Fig.
1 2 1 2 1 2 1 2 1 2 1 2
(1) The heating current is the DC current which causes the component temperature to increase by approximately 50°C. This current is determined by soldering the component on a typical application PCB, and then apply the current to the component for 30 minutes. (2) Isat is the saturation current at which inductance rolls off approximately 30% from its initial value. (3) DC resistance is measured at 25°C.
SNJ54AHCT86J中文资料
PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)5962-9681701Q2A ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC 5962-9681701QCA ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC 5962-9681701QDA ACTIVE CFP W141TBD Call TI Level-NC-NC-NC SN74AHCT86D ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DBLE OBSOLETE SSOP DB14TBD Call TI Call TISN74AHCT86DBR ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DBRE4ACTIVE SSOP DB142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DE4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DG4ACTIVE SOIC D1450Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DGVR ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DGVRE4ACTIVE TVSOP DGV142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DR ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DRE4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86DRG4ACTIVE SOIC D142500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NCSN74AHCT86NSR ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86NSRE4ACTIVE SO NS142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86PW ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86PWE4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86PWG4ACTIVE TSSOP PW1490Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHCT86PWLE OBSOLETE TSSOP PW14TBD Call TI Call TISN74AHCT86PWR ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86PWRE4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86PWRG4ACTIVE TSSOP PW142000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74AHCT86RGYR ACTIVE QFN RGY141000Green(RoHS&no Sb/Br)CU NIPDAU Level-2-260C-1YEAR SNJ54AHCT86FK ACTIVE LCCC FK201TBD Call TI Level-NC-NC-NC SNJ54AHCT86J ACTIVE CDIP J141TBD Call TI Level-NC-NC-NC SNJ54AHCT86W ACTIVE CFP W141TBD Call TI Level-NC-NC-NC(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN74AHC541PWRG4中文资料
PACKAGING INFORMATIONOrderable Device Status (1)Package Type Package Drawing Pins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-9685701Q2A ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type 5962-9685701QRA ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type 5962-9685701QSA ACTIVE CFP W 201TBD A42N /A for Pkg Type SN74AHC541DBLE OBSOLETE SSOP DB 20TBDCall TI Call TISN74AHC541DBR ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DBRE4ACTIVE SSOP DB 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DGVR ACTIVE TVSOP DGV 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DGVRE4ACTIVE TVSOP DGV 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DW ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DWE4ACTIVE SOIC DW 2025Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DWR ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541DWRE4ACTIVE SOIC DW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541N ACTIVE PDIP N 2020Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74AHC541NE4ACTIVE PDIP N 2020Pb-Free (RoHS)CU NIPDAU N /A for Pkg Type SN74AHC541NSR ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541NSRG4ACTIVE SO NS 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541PW ACTIVE TSSOP PW 2070Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541PWE4ACTIVE TSSOP PW 2070Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541PWG4ACTIVE TSSOP PW 2070Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541PWLE OBSOLETE TSSOP PW 20TBDCall TI Call TISN74AHC541PWR ACTIVE TSSOP PW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541PWRE4ACTIVE TSSOP PW 202000Green (RoHS &no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74AHC541PWRG4ACTIVE TSSOP PW 202000Green (RoHS &no Sb/Br)CU NIPDAULevel-1-260C-UNLIMSNJ54AHC541FK ACTIVE LCCC FK 201TBD POST-PLATE N /A for Pkg Type SNJ54AHC541J ACTIVE CDIP J 201TBD A42SNPB N /A for Pkg Type SNJ54AHC541WACTIVECFPW201TBDA42N /A for Pkg Type(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in29-Jun-2006a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.29-Jun-2006TAPE AND REELINFORMATION30-Apr-2007DevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74AHC541DBR DB 20MLA 330168.27.5 2.51216Q1SN74AHC541DGVR DGV 20MLA 330127.0 5.6 1.6812Q1SN74AHC541DWR DW 20MLA 3302410.813.0 2.71224Q1SN74AHC541NSR NS 20MLA 330248.213.0 2.51224Q1SN74AHC541PWRPW20MLA330166.957.11.6816Q1TAPE AND REEL BOX INFORMATIONDevice Package Pins Site Length (mm)Width (mm)Height (mm)SN74AHC541DBR DB 20MLA 333.2333.228.58SN74AHC541DGVR DGV 20MLA 338.1340.520.64SN74AHC541DWR DW 20MLA 333.2333.231.75SN74AHC541NSR NS 20MLA 333.2333.231.75SN74AHC541PWRPW20MLA333.2333.228.5830-Apr-2007PACKAGE MATERIALS INFORMATION30-Apr-2007Pack Materials-Page3元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements,improvements,and other changes to its products and services at any time and to discontinue any product or service without notice.Customers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’sstandard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support thiswarranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarilyperformed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products andapplications using TI components.To minimize the risks associated with customer products and applications,customers shouldprovide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,maskwork right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or servicesare rmation published by TI regarding third-party products or services does not constitute a license from TI to use suchproducts or services or a warranty or endorsement e of such information may require a license from a third party underthe patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and isaccompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is anunfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or servicevoids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive businesspractice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product wouldreasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreementspecifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramificationsof their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-relatedrequirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding anyapplications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and itsrepresentatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products arespecifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet militaryspecifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade issolely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements inconnection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI productsare designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。
SNJ54LS123FK中文资料
PRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.1POST OFFICE BOX 655303 • DALLAS, TEXAS 752652POST OFFICE BOX 655303 • DALLAS, TEXAS 752653 POST OFFICE BOX 655303 • DALLAS, TEXAS 752654POST OFFICE BOX 655303 • DALLAS, TEXAS 752655 POST OFFICE BOX 655303 • DALLAS, TEXAS 752656POST OFFICE BOX 655303 • DALLAS, TEXAS 752657 POST OFFICE BOX 655303 • DALLAS, TEXAS 752658POST OFFICE BOX 655303 • DALLAS, TEXAS 752659 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265PACKAGING INFORMATIONOrderable Device Status (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)5962-7603901VEA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC 5962-7603901VFAACTIVE CFP W 161None Call TI Level-NC-NC-NC 7603901EA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC 7603901FA ACTIVE CFP W 161None Call TI Level-NC-NC-NC JM38510/01203BEA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC JM38510/31401B2A ACTIVE LCCC FK 201None Call TI Level-NC-NC-NC JM38510/31401BEA ACTIVE CDIP J 161None Call TI Level-NC-NC-NC JM38510/31401BFAACTIVE CFP W 161None Call TI Level-NC-NC-NC SN54122J OBSOLETE CDIP J 14None Call TI Call TISN54123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SN54LS123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SN74122N OBSOLETE PDIP N 14None Call TI Call TISN74123N ACTIVE PDIP N 1625Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC SN74123N3OBSOLETE PDIP N 16None Call TI Call TISN74LS122D ACTIVE SOIC D 1450Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS122DR ACTIVE SOIC D 142500Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS122N ACTIVE PDIP N 1425Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC SN74LS122N3OBSOLETE PDIP N 14None Call TI Call TISN74LS122NSR ACTIVE SO NS 142000Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS123D ACTIVE SOIC D 1640Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS123DR ACTIVE SOIC D 162500Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SN74LS123J OBSOLETE CDIP J 16None Call TI Call TISN74LS123N ACTIVE PDIP N 1625Pb-Free (RoHS)CU NIPDAU Level-NC-NC-NC SN74LS123N3OBSOLETE PDIP N 16None Call TI Call TISN74LS123NSR ACTIVE SO NS 162000Pb-Free (RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIM SNJ54122J OBSOLETE CDIP J 14None Call TI Call TISNJ54123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SNJ54123W ACTIVE CFP W 161None Call TI Level-NC-NC-NC SNJ54LS123FK ACTIVE LCCC FK 201None Call TI Level-NC-NC-NC SNJ54LS123J ACTIVE CDIP J 161None Call TI Level-NC-NC-NC SNJ54LS123WACTIVECFPW161NoneCall TILevel-NC-NC-NC(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.PACKAGE OPTION ADDENDUM28-Feb-2005Addendum-Page 1元器件交易网OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -May not be currently available -please check /productcontent for the latest availability information and additional product content details.None:Not yet available Lead (Pb-Free).Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean "Pb-Free"and in addition,uses package materials that do not contain halogens,including bromine (Br)or antimony (Sb)above 0.1%of total product weight.(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.PACKAGE OPTION ADDENDUM 28-Feb-2005Addendum-Page 2IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SNC54S19x中文资料
PACKAGING INFORMATIONOrderable DeviceStatus (1)Package Type Package DrawingPins Package Qty Eco Plan (2)Lead/Ball FinishMSL Peak Temp (3)7601501CA OBSOLETE CDIP J 14TBD Call TI Call TI 7601501DA OBSOLETE CFP W 14TBD Call TI Call TI 7601501DA OBSOLETE CFP W 14TBD Call TI Call TISN54196J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SN54196J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SN54197J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SN54197J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SN54LS197J OBSOLETE CDIP J 14TBD Call TI Call TI SN54LS197J OBSOLETE CDIP J 14TBD Call TI Call TI SN74196N OBSOLETE PDIP N 14TBD Call TI Call TI SN74196N OBSOLETE PDIP N 14TBD Call TI Call TI SN74197N OBSOLETE PDIP N 14TBD Call TI Call TI SN74197N OBSOLETE PDIP N 14TBD Call TI Call TI SN74LS196D OBSOLETE SOIC D 14TBD Call TI Call TI SN74LS196D OBSOLETE SOIC D 14TBD Call TI Call TI SN74LS196DR OBSOLETE SOIC D 14TBD Call TI Call TI SN74LS196DR OBSOLETE SOIC D 14TBD Call TI Call TI SN74LS196N OBSOLETE PDIP N 14TBD Call TI Call TI SN74LS196N OBSOLETE PDIP N 14TBD Call TI Call TI SN74LS197D OBSOLETE SOIC D 14TBD Call TI Call TI SN74LS197D OBSOLETE SOIC D 14TBD Call TI Call TI SN74LS197J OBSOLETE CDIP J 14TBD Call TI Call TI SN74LS197J OBSOLETE CDIP J 14TBD Call TI Call TI SN74LS197N OBSOLETE PDIP N 14TBD Call TI Call TI SN74LS197N OBSOLETE PDIP N 14TBD Call TI Call TI SN74S196N OBSOLETE PDIP N 14TBD Call TI Call TI SN74S196N OBSOLETE PDIP N 14TBD Call TI Call TI SN74S197N OBSOLETE PDIP N 14TBD Call TI Call TI SN74S197N OBSOLETE PDIP N 14TBD Call TI Call TISNJ54196J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SNJ54196J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SNJ54197J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SNJ54197J ACTIVE CDIP J 141TBD Call TI Level-NC-NC-NC SNJ54197W OBSOLETE CFP W 14TBD Call TI Call TI SNJ54197W OBSOLETE CFP W 14TBD Call TI Call TI SNJ54LS197FK OBSOLETE LCCC FK 20TBD Call TI Call TI SNJ54LS197FK OBSOLETE LCCC FK 20TBD Call TI Call TI SNJ54LS197J OBSOLETE CDIP J 14TBD Call TI Call TI SNJ54LS197J OBSOLETE CDIP J 14TBD Call TI Call TI SNJ54LS197W OBSOLETE CFP W 14TBD Call TI Call TI SNJ54LS197WOBSOLETECFPW14TBDCall TICall TIPACKAGE OPTION ADDENDUM26-Sep-2005(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS)or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.PACKAGE OPTION ADDENDUM26-Sep-2005IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
SN54LS37FK资料
IMPORTANT NOTICETexas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER’S RISK.In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.Copyright © 1998, Texas Instruments Incorporated。
AJ-54C系列控制箱组件清单说明书
SECTION 6: PARTS SECTIONAJ-54 CONTROL BOX ASSEMBLY12345611879101213141516, 1715191820212223AJ-76 & AJ-90 CONTROL BOX ASSEMBLY1 23, 4, 564, 7, 10, 11, 1284, 9, 1014 14 1415 16 17 18 1820, 2122, 23 24, 25, 2626, 2726, 2829 31 303013, 26 19, 26PREWASH PLUMBING ASSEMBLYY-Strainer, 3/4” NPT,Brass04730-717-02-06Nipple, 3/4”, Brass, Close04730-207-34-00Valve, Solenoid, 3/4”04810-100-53-00Nipple, 3/4”, Brass, Close04730-207-34-00Vacuum Breaker, 3/4”04820-002-53-77Elbow, 90°, 3/4” Brass 04730-206-04-34Elbow, 90°, 3/4” Brass 04730-206-04-34Nipple, 3/4” x 6” Long 05700-001-26-74Fill Line Injector Replacement Kit06401-003-09-93A new gasket can be ordered using part num-ber 05330-111-42-81.Replacement Kit Note:The kit for the fill line injector comes with the injector weldment, a new gasket and the mounting hardware.WATER HAMMER ARRESTOR OPTION/WATER PRESSURE REGULATOR KIT OPTIONNipple, 3/4” NPT,Close, Brass 04730-207-34-00Water Arrestor, 1/2” NPT 06685-100-05-00Tee, 3/4” x 3/4” x 1/2”04730-211-06-00Water Arrestor, 1/2” NPT 06685-100-05-00Bushing, 3/4” x 1/2”04730-002-01-34Tee, Brass, 3/4” x 3/4” x 3/4”04730-211-01-34Nipple, Close, 3/4”04730-207-34-00Regulator, Pressure, 3/4”06685-011-58-22WATER PRESSURE REGULATOR WITH ARRESTOR KIT OPTIONWATER HAMMER ARRESTOR OPTIONITEM QTY DESCRIPTIONMfg. No.11Reducer, 3/4” NPT to 1/2” NPT, Black Iron 04730-911-02-3422Union, 3/4” NPT, Black Iron04730-912-01-0034Nipple, Close, 3/4” NPT, Black Iron 04730-907-01-0041Valve, Steam Solenoid, 3/4” NPT, 120V 04820-011-87-3952Elbow, 90°, 3/4” FNPT, Black Iron04730-906-10-3462Elbow, Street, 90°, 3/4” NPT, Black Iron 04730-011-87-3771Y-Strainer, 3/4” NPT, Black Iron 04730-217-01-3281Valve, Gate, Steam, 3/4” NPT 04820-100-19-0091Plug, 3/8” NPT, Black Iron 04730-909-02-34101Nipple, 3/4” NPT x 47” Long04730-021-89-26 111Pipe, 3/4” NPT x 2” Long,Black Iron 04730-907-05-34121Steam Trap, 3/4” NPT06680-500-02-77234105368379156112312STEAM INLET PLUMBINGSTEAM OUTLET PLUMBINGITEM QTY DESCRIPTIONMfg. No.12Reducer, 3/4” NPT to 1/2” NPT, Black Iron 04730-911-02-3422Union, 3/4” NPT, Black Iron04730-912-01-0034Nipple, Close, 3/4” NPT, Black Iron 04730-907-01-0041Valve, Steam Solenoid, 3/4” NPT, 120V 04820-011-87-3951Elbow, 90°, 3/4” FNPT, Black Iron04730-906-10-3461Elbow, Street, 90°, 3/4” NPT, Black Iron 04730-011-87-3771Y-Strainer, 3/4” NPT, Black Iron 04730-217-01-3281Valve, Gate, Steam, 3/4” NPT 04820-100-19-0091Plug, 3/8” NPT, Black Iron 04730-909-02-34101Nipple, 3/4” NPT x 10” Long04730-907-06-34 111Reducer, 3/4” NPT to 1/2” NPT, Black Iron 04730-911-02-34121Elbow, 90°, 3/4” FNPT, Black Iron 04730-906-10-34131Elbow, Street, 3/4” NPT, Black Iron 04730-011-87-37141Steam Trap, 3/4” NPT 06680-500-02-77896371053341213214STEAM INLET PLUMBINGSTEAM OUTLET PLUMBINGTube, Copper, 1-1/2” x 10-1/8” Long05700-002-99-00Adapter, Male to Female, 1-1/2”04730-401-25-01Elbow, 1-1/2” FNPT, 90°, Brass04730-011-73-77Tube, Copper, 1-1/2” x 4-5/8” Long05700-002-98-98Tube, Copper, 1-1/2” x 6-3/8” Long 05700-002-98-99Left to Right Plumbing AssemblyConnector, No-Hub, 1-1/2”4720-604-06-00Valve, Ball, 1-1/2”04820-111-71-46Ball Valve Handle Assembly05700-021-84-74Nipple, Brass, Close, 1-1/2” NPT04730-207-40-00Nipple, Brass, 3” NPT 04730-011-87-04Tee, Brass, 1-1/2” x 1-1/2” x 1-1/2”04730-011-69-93Tube, Copper, 1-1/2” x 6-3/8” Long05700-002-98-99Tube, Copper, 1-1/2” x 4-5/8” Long05700-002-98-98Tube, Copper, 1-1/2” x 10-1/8” Long05700-002-99-00Nipple, Rinse Weldment05700-021-84-61Elbow, Brass,Street, 1-1/2” NPT 04730-206-32-00Right to Left Plumbing AssemblyAll parts are common to both assemblies.MOTOR ASSEMBLIESWASH MOTOR CHART VoltsPhase Hz Motor Part Number Kit Part Number 208 - 23016006105-021-70-5706401-003-09-97200 - 23036006105-121-70-5806401-003-09-9846036006105-121-70-5806401-003-09-9857536006105-002-48-3106401-003-09-9960036006105-002-48-3106401-003-09-99PREWASH MOTOR CHARTModel(s)Volts Phase Hz Part Number Kit Part Number AJ-76’s20816006105-121-70-5506401-003-10-4023016006105-121-70-5506401-003-10-4020036006105-121-70-5606401-003-10-3822036006105-121-70-5606401-003-10-3823036006105-121-70-5606401-003-10-3846036006105-121-70-5606401-003-10-3857536006105-002-48-3106401-003-10-4160036006105-002-48-3106401-003-10-41AJ-90’s20816006105-121-70-5706401-003-10-4223016006105-121-70-5706401-003-10-4220036006105-121-70-5806401-003-10-4322036006105-121-70-5806401-003-10-4323036006105-121-70-5806401-003-10-4346036006105-121-70-5806401-003-10-4357536006105-002-48-3106401-003-10-4160036006105-002-48-3106401-003-10-41See Motor Chart BelowKey, 3/16” x 1” LongPump Plate 05700-021-71-83Cap Screw, 3/8”-16 x 2”05305-011-74-98Wash Impeller Replacement Kit 06401-003-10-51Prewash Impeller Replacement Kit 06401-003-10-55Pump Seal 06401-003-06-73Impeller Washer Bolt, 1/4”-20 x 3/4”Motor Mounting Gasket 06401-003-06-75Replacement Kit Notes:The impeller replacement kits come with the impeller, washer, key and bolt. The motor kits come with everything detailed above as well as two new mounting gaskets.Kit, Motor Brkt Replace 06401-021-73-42Clamp, 4 1/8” - 7” (Not Shown)04730-002-32-15CURTAINS/TUB MAGNETSCurtain, 21” Long x 20-1/2” Wide 08415-131-73-45Curtain, 12” Long x 20-1/2” Wide 08415-131-73-44Curtain Rod05700-021-73-43Long Curtain Decal 09905-011-73-84Short Curtain Decal 09905-011-73-82Curtain, 24 1/2” Long x 20-1/2” Wide CGP MODELS ONLY08415-002-47-37Extra Long Curtain Decal CGP MODELS ONLY09905-002-52-69Middle Curtain Hook05700-011-72-65 Curtain Hook05700-011-83-54Limit Switch Bracket 05700-021-71-18Conveyor Switch Replacement Kit06401-003-11-79Replacement Kit Note:The conveyor switch replacement kitcomes with the switch, a terminal anda wire nut.Service Note:The cord for the conveyor switch needs to be cut to length in the field and have the pink terminal applied there.DRIVE ASSEMBLY(CONTINUED)ITEM QTY DESCRIPTION Mfg. No.11Drive Plate and Rod Weldment05700-021-67-44Replacement Kit with Expansion Legs06401-021-86-80Replacement Kit with Expansion Legs/Adjuster Crank06401-011-94-54 21Adjuster Crank Assembly05700-021-69-95 31Skotch Yoke Weldment Replacement Kit06401-003-08-48 42Coupling & Expansion Leg Weldment05700-021-67-50 51Pawl Bar Drive Linkage Casting09515-021-87-73 61Spacer Plate05700-011-67-58 72Pillow Block Replacement Kit06401-003-08-50 82Shaft Collar05700-011-89-18 91Drive Socket05700-021-67-39 101Drive Plate05700-021-67-42 112Pillow Block03120-021-71-87 121Drive Spring05315-011-83-51 132Shaft Collar05700-011-89-18 141Drive Motor Mounting Bracket05700-031-73-56 151Adjuster Spring05315-011-71-90 161Adjusting Handle Weldment05700-021-72-28 171Drive Motor Replacement KitsDrive Motor (50 Hz Models)06401-003-08-41 1Drive Motor (208-230 Volt, 60 Hz, Single Phase Models)06401-003-08-42Drive Motor (208-230 Volt, 60 Hz, Three Phase Models)06401-003-08-40Drive Motor (600 Volt, 60 Hz, Three Phase Models)06401-003-08-43 181Gear Drive06105-011-87-20 191Roller Bearing03120-011-71-81 201Drive Hub05700-011-67-971920Detail A Front Drive Motor CoverReplacement Kit06401-003-11-64Rear Drive Motor CoverReplacement Kit06401-003-10-18Replacement Kits Notes:The replacement kits for the drive motor covers comewith the weldments and the mounting hardware.PAWL BAR MISCELLANEOUS COMPONENTSPawl Bar Gutter Weldment Replacement Kit06401-003-09-95Bottom Guide BlockTop Guide BlockPawl Bar Gutter Gasket 05330-011-68-55Replacement Kits Notes:The pawl bar gutter weldment replacement kit contains the weld-ment, a gasket and the mounting hardware. The guide block kit con-tains both blocks and a gasket.Service Note:It is highly recommended that when changing out one guide block, that the other be changed out as well, along with the gasket.Guide Block Replacement Kit 06401-003-10-15Pawl Bar Roller Replacement Kit 06401-003-11-80Replacement Kit Notes:The replacement kit for the pawl bar roller comes with the roller, roller shaft, hardware and locknut as shown.Pawl Bar Bracket (with studs) Weldment05700-031-84-68Pawl Bar Bracket (without tabs) Weldment05700-031-92-36Left to Right AssemblyPawl Bar Weldment 05700-031-75-18Pawl Bar Spacer 05700-011-71-45Pawl Bar Dog Casting 05700-021-69-00Pawl Bar Weldment 05700-031-82-00Right to Left AssemblyAJ-76 Complete L-R Assembly 06401-141-81-04AJ-76 Complete R-L Assembly 06401-241-81-04AJ-76 Prison Assembly 06401-341-81-04Left to Right AssemblyBolt, 3/8”-16 x 1-3/4” Long5306-011-36-94Locknut, 3/8”-16 with Nylon Insert 05700-011-72-55Pawl Bar Spacer 05700-011-71-45Pawl Bar Dog Casting05700-021-69-00Pawl Bar Weldment 05700-031-74-19Right to Left AssemblyAll associated hardware, spacers and castings may be ordered using the part numbers indicated in the above assembly.Pawl Bar Weldment 05700-041-82-01Both assemblies contain 20 pawl bar dog castings. Please note the direction of installation as indicated on the above drawings. When replacing pawl bar dog castings, ensure to re-install in the appropriate direction. If you do not, then the rack will not be pulled through the machine during operation.AJ-90 Complete L-R Assembly 06401-141-81-05AJ-90 Complete R-L Assembly 06401-241-81-05AJ-90 Prison Assembly 06401-341-81-05MANIFOLDS/STRAINER SUPPORT WELDMENTSPrewash Manifold Weldment AJ-66 Models Only 05700-031-69-70Prewash Manifold Weldment AJ-80 Models Only 05700-002-24-94Prewash Manifold Weldment (CGP Models Only)05700-002-59-51Wash Manifold Weldment05700-031-71-13Wash Manifold Weldment(CGP Models Only)05700-002-51-14Shoulder Bolt Wingnut Weldment05700-002-46-02Wash Fill Tube Weldment05700-021-71-21Prewash Fill Tube Weldment (AJ-66 & AJ-80 Models Only)05700-021-74-76Vellumoid Gasket 05330-111-42-81Wash Strainer Separator Weldment05700-031-84-38STRAINERSBack Strainer Weldment05700-021-85-11Drain Guard Strainer Weldment 05700-002-09-15Front Strainer Weldment05700-021-85-10Screen Strainer with Handle Weldment 05700-002-09-04Overflow Strainer Support05700-001-96-48Tub Strainer Weldment (CGP Models)05700-002-03-21Wash Intake Strainer Weldment (CGP Models)05700-002-51-52FLOAT SWITCH COMPONENTS/SCRAP BASKETSFloat Switch Support BracketReplacement Kit 06401-003-11-77Float Switch Cover 05700-021-75-71Scrap Basket Lid Weldment05700-002-56-55Scrap Basket Assembly 06401-011-87-78Wash Tank Float Switch Replacement Kit 06401-003-11-75Prewash Tank Float Switch Replacement Kit 06401-003-11-76Replacement Kit Note:The float switch replacement kits contain the float switch with associated terminals, the flat washer and the nut.Service Agent Note:Remember than when reinstalling the float switch that the flat washer goes inside against the tub wall while the nut is on the outside of the tub.Replacement Kit Note:The float switch support bracket replace-ment kit contains the bracket and asso-ciated hardware for mounting.。
常用接插件型号图文自己总结
常⽤接插件型号图⽂⾃⼰总结常⽤接插件型号（图⽂）2.54间距的叫SCN2.0间距的叫SAN端⼦187端⼦护套2个4.2间距公壳型号5557 母壳PH2.0XH-8PFD-14P 2.54间距CH3.96VH3.96ZH(1.5间距)EL特指4.5间距，SM指2.54间距DG1000-2P接插件LED显⽰屏/LED显⽰屏散件/P10半户外/16P排线压头 FC-16P接插件接插件 2.54间距 2*40P 双排针双排直针5.08-301-2P 接插件针座端⼦接插件 SM 脚距2.54 线1007公端⼦接插件 2.8插簧插⽚ 2.8MM 铜XH-2.54-2P接插件1+1接插件VH3.96-2P接插件DC3-10P接插件接插件间距4.5MM 对插接插件接插件焊接式公头 DB25接插件 EL 2P 条形连接器接插件 CH3.96-5P接插件 RS232串⼝ DB9母头 DB9孔全铜接插件标准6.3MM 插簧插⽚护套 0.5元/套冷压接线端⼦5.0MM 两位接插件2.54单排针，1*40P 排针接插件2.54MM接插件焊接式公头 DB37 蓝⾊PH2.0mm胶壳、针座、端⼦连接器、接插件系列XH2.54-3P接插件插件座间距2.54MMfc-16P接插件KF/DG1000-2p 接插件/接插座/接线端⼦脚间距10MM接插件杜邦线20CM1P-1P2P接插件(脚间距5.08mm)DC3-10P 接插件下载座JST对插接插件母壳 2P（10个MOG接插件l连接器 2.0MM PH-2A针座(插座2.8端⼦型车⽤连接器接插件线缆连接器连接件对接 2线串⼝头接插件DR9针式板载式焊接式弯针插座(母头) RS232杜邦（间距2.0mm）双排胶壳，针座，端⼦连接器、接插件系列接插件KF2510-6P 间距2.54接插件⼀套包括：头⼦+座⼦+簧⽚适配器适配座转换座 PLCC44转DIP40 PLCC-44芯(贴⽚)接插件航空插头连接器 GX16-2T（2芯）接插件接插件测试插头插座⼗字插⾹蕉插 0.9元⼀对红⾊4.8接插件铜件两只脚焊板插⽚公端⼦接插件 6.3插簧插⽚ 6.3MM 铜HT3.96-10P橙⾊,接插件DB25 公头/针⼆排25芯接插头接插件FC-8P 排线头接插件2.54间距⼀套6.3插簧接插件铜件接插件⽩⾊插座 2510-3芯直脚KF2510端⼦接插件端⼦ 2.54MM冷压头簧⽚5557 连接件接插件 8孔连线器插座塑料连接件对插件DC3-20P接插件6.3-4 (6.3端⼦）型车⽤连接器接插件接线器 4线连接件XH2.54-2P接插件间距2.54MM ⼀套接插件XH2.54-10P 座⼦+线线长20CM接插件KF-4P 拔插式接线端⼦ KF2EDG 间距5.08MM ⼀套弯针SM-2P 对插锁紧接插件⼀套公壳+母壳+公簧⽚+母簧⽚USB A母连接头 A母插座 USB接插件XH2.54-5P接插件,连接器,针距2.54MM 端⼦座+插头+簧⽚⼀套PLCC 32贴⽚插座接插件连接器4.8直插/插簧/插⽚/对插件/单线连接器/单线接插件航空插头/GX16-2芯/⼀套/ 电缆连接器接插件【不锈钢】16型⾼品质航插航空插头航空插座接插件电连接器8芯防⽔对接端⼦防⽔对插连接器汽车防⽔接插件密封防⽔对插端⼦1套⼤号⽪套鳄鱼夹电⼦接插件接线夹连线夹⾹蕉插座⾹蕉插头⾹蕉接头接插件测试接头B101连接器2.8端⼦型/车⽤连接器/接插件/空中对接/摩托车6PBNC插座铜镀⾦针BNC反接头 Q9头反接焊接⽅式摄像机视频接插件6.3多孔接插件电⼦连接件车⽤电器连接插头插座 3孔4+1接插件双皇冠接插件－MINI USB座贴⽚迷你 MINI-5P 铁LED显⽰屏/LED显⽰屏散件/P10半户外/16P排线压头 FC-16P接插件接插件杜邦线20CM8P-8P⾹蕉插头质量好连接头测试头接插件DIY电⼦实验制作配件连接器接插件SCSI68PIN双母头连接线接插件6.3带护套接插件铜件连接器TJC3 2.54 XH-2AW(2位弯脚插座/90度)批发 P48-26芯⼤电流航空插头接头电缆接插件SM2.5-3P公母对接胶壳，端⼦，条形连接器，接插件，⿊⾊，1套弯针XH2.54-2P接插件间距2.54MM ⼀套：插头+弯插座+端⼦ 20MOG电源插头接插件电源座。
SNJ5407FK中文资料
PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)JM38510/00803BCA ACTIVE CDIP J141None Call TI Level-NC-NC-NC JM38510/00803BDA ACTIVE CFP W141None Call TI Level-NC-NC-NC SN5407J ACTIVE CDIP J141None Call TI Level-NC-NC-NC SN5417J ACTIVE CDIP J141None Call TI Level-NC-NC-NCSN7407D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7407DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7407J OBSOLETE CDIP J14None Call TI Call TISN7407N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN7407N3OBSOLETE PDIP N14None Call TI Call TISN7407NSR ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7417D ACTIVE SOIC D1450Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7417DR ACTIVE SOIC D142500Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSN7417N ACTIVE PDIP N1425Pb-Free(RoHS)CU NIPDAU Level-NC-NC-NC SN7417N3OBSOLETE PDIP N14None Call TI Call TISN7417NSR ACTIVE SO NS142000Pb-Free(RoHS)CU NIPDAU Level-2-260C-1YEAR/Level-1-235C-UNLIMSNJ5407FK ACTIVE LCCC FK201None Call TI Level-NC-NC-NCSNJ5407J ACTIVE CDIP J141None Call TI Level-NC-NC-NCSNJ5407W ACTIVE CFP W141None Call TI Level-NC-NC-NCSNJ5417J ACTIVE CDIP J141None Call TI Level-NC-NC-NC(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-May not be currently available-please check /productcontent for the latest availability information and additional product content details.None:Not yet available Lead(Pb-Free).Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean"Pb-Free"and in addition,uses package materials that do not contain halogens, including bromine(Br)or antimony(Sb)above0.1%of total product weight.(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to takereasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TIto Customer on an annual basis.元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。
长城牌DAH喷油回转式空气压缩机油产品手册说明书
PRODUCT MANUAL 工业用油
工业用油产品手册
压缩机油 - 空气DAH喷油回转式空气压缩机油
长城牌D A H喷油回转式空气压缩机油是以加氢基础油为原料，并加入多种添加剂调和而成。
适用于各种中负荷喷油回转式（螺杆和滑片）空气压缩机的润滑。
本产品按照40℃运动黏度分为22、32、37、46等牌号。
◎ 优异的抗氧化安定性，具有很长的使用寿命
◎ 优良的油水分离性能
◎ 优良的抗磨损性能
◎ 良好的防锈性能
产品符合以下规格：
◎ Q/SH PRD106—2008
◎ 适用于排气温度小于100℃和有效工作压力800kPa～1500kPa，或排气温度
100℃～110℃和有效工作压力小于800kPa的回转式（螺杆和滑片）空气压缩机 的润滑。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
元器件交易网
元器件交易网
元器件交易网
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. T o minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers Audio /audio
Data Converters Automotive /automotive
DSP Broadband /broadband
Interface Digital Control /digitalcontrol
Logic Military /military
Power Mgmt Optical Networking /opticalnetwork
Microcontrollers Security /security
Telephony /telephony
Video & Imaging /video
Wireless /wireless
Mailing Address:Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2004, Texas Instruments Incorporated。