B_Hose Fitting_Socket

合集下载

Spears SUPER SOURCEBOOK - 一本塑料管道配件、阀门、管道和水泥类产品的完整目

R O D U C T S M A D E B YS P E A R S®M A N U F A C T U R I N G C O M P A N Y I N T H E U.S.A.F O R A L L Y O U R P L A S T I C P I P I NG N E E D SSSB-1-1011PA L LVisit our web site:T A B L O C A T O RC o n v e n i e n t “T a b L o c a t o r ” p a g e l e t s y o u q u i c k l y t h u m b t o e a c h c a t e g o r y m a t c h i n g s h a d e d t a b s i n t h e o u t e r m a r g i n o f e a c h p a g e .Understanding Column Header & Con À guration InformationA variety of Column Header layouts are used to list product part numbers, options, discount codes, and list price. The following are the mosttypical used:Typical Fitting Column Header label identi ¿ es the following product particulars:Part Number The number used to order the part.Size N ominal diameter of pipe with which the ¿ tting is to be used. NOTE: Fittings may be same size (only one sizedesignation) or reducing (multiple sizes designated).Standard Pack (Std Pk) The quantity of parts packaged in an individual box or bag.Master Carton (Mstr Ctn) The total quantity of parts contained in individual boxes or bags which are packaged together.Discount Code (Disc Code) I denti ¿ cation code for applicable discount to the list price of the product. NOTE: This is a Product Group code andis not a calculation of discount. Discount codes are not the same for all products contained in this price schedule.Price Each The designated list price of the product.Fitting Con À guration Drawings are accompanied by the product’s name and an abbreviated con ¿ guration description of the ¿ tting outlet connec-tions. Line drawing illustrations are general representations of the ¿ ttings in the group, but may not be an exact depiction of all con ¿ gurations listed. Line drawings are correlated to the con ¿ guration description. The drawing is read left to right for Elbow and Adapter con ¿ gurations. Tees have an additional outlet branch and are read left to right (run) then top (branch). Drawings for Wyes and Crosses are read top to bottom then left to right and bushings drawings are read as outside x inside con ¿ guration. The con ¿ guration description also correlates to the size designation. As with the nominal size designations, only one description is given when all outlets are the same. Reducing sizes list run con ¿ guration x branch con ¿ guration.Typical Valve Column Header label identi ¿ es the following product particulars. Headers are generally preceded by identi ¿ cation of material type and con ¿ guration descriptions. Again, variations exist according to product type and con ¿ gurations.Size The nominal diameter of the pipe with which the valve is to be used.Seal Type Designated elastomer seal (O-ring, Seat, Diaphragm, etc.)(i.e., EPDM, Viton ®) NOTE: Part Number and List Price are typically speci ¿ ed under the seal type columns.C ertain products may have other column header designations under which part number and pricing are speci-¿ ed in a similar manner.Standard Pack (Std Pk) The quantity of parts packaged in an individual box or bag.Master Pack (Mstr Pk) The total quantity of parts contained in a single packaging of multiple Standard Packs.Discount Code (Disc Code) I denti ¿ cation code for applicable discount to the list price of the product. NOTE: This is a Product Group code andis not a calculation of discount. Discount codes are not the same for all products contained in this price schedule.Valve Illustrations may be as photos or line drawings. Illustrations are general representations of the valve or product speci ¿ ed, but may not depict all con ¿ gurations listed.Page IIIPart NumberSizeStdPkMstr CtnDisc CodePrice Each402-0033/850200040.97402-0051/250300040 1.01402-0073/4500401.58ExampleProduct Name ------------------- TeeAbbreviated ----------------------- Soc x Fipt Configuration DescriptionIn this example, outletdescription is “Soc x Fipt”which indicates:1. Socket x 2. Socket x3. Female Iron Pipe Thread123Product Type(Page Heading)Typical Presentation PhotoSocket StylePressure Rating @ 73°F (23°C) Water 1/2" - 4"6" - 8"Flanged235 psi 150 psi 150 psiMaximum Service TemperaturePVC=140°F (60°C)CPVC=200°F (93°C)Temperature/Pressure De-ratings ApplyTechnical DataExampleSize EPDMViton ®Std PkMstr PkDisc CodePVC Industrial1/21829-005XX.XX1829-005XX.XX118101Socket EndsPricePart NumberMaterialEnd ConnectorSpears ® Super SourcebookViton ® is a Registered Trademark of DuPont Dow ElastomersSpears ® Super SourcebookTABLE OF CONTENTS1Low VOC Solvent Cements & Primers1Spears® Low VOC Solvent Cements & Primers 1PVC Low VOC Cements2Low VOC Solvent Primers & Cleaners4PVC Schedule 40 Fittings5Tees 590° Ells7Non 90° Ells 9Wyes 11Crosses 12Couplings 13Adapters15Riser Extension 17Reducer Bushings 17Caps 18Plugs 19Unions19Glue-on Saddles20Clamp-On & Hot-Tap Saddles22Mechanical Clamp-On Transition Saddles 29Schedule 40 Tank Adapters30PVC White Schedule 40 - Hard to Find Configurations -Pool & Spa Specialties31Pool & Spa Fittings31True Union 2000 Standard Ball Valve - PVC White 32PVC Pool Butterfly Valves33UVR Schedule 40 Fittings34UVR Sch 40 Fittings34PVC Gray Schedule 40 Fittings36PVC Gray Sch 40 Fittings36PVC Black Schedule 40 Fittings40PVC Black Schedule 40 Fittings40PVC Clear Schedule 40 Pipe & Fittings42PVC Clear Sch 40 Pipe & Fittings42Compression & Repair Fittings44Schedule 40 Repair Fittings 44Repair Couplings45Short Repair Couplings 46Compression Couplings47Compression Male Adapters49Irrigation & Hose Filters50Filters50Reverse Flow Filters51In-line Tee Style Filters and Reverse In -line Tee Style Filters 53Hose Filters55PVC Irrigation Specialty Products57• Hose Fittings • Solvent Weld For Flexible PVC Hose 57• Hose Fittings • For 1/2" Polyethylene (.580 I.D.) Hose 57Hose Adapters58Irrigation Accessories 59Sprinkler Accessories59Dri-Splice Wire Connectors61PVC Irrigation Manifold Systems62High Strength 1" Manifold Systems63Turf Swivel Joints64Turf Swivel Kits 65Turf Swivel Joints66Made in the U.S.A.Page IVProgressive Products from Spears ®Innovation and TechnologySpears®Super SourcebookTABLE OF CONTENTSCompact Turf Swivel Joints66 Pressure Regulated Swivel Joints68 Turf Swivel Joint Replacement Parts68 Pipe Flanges70 Pipe Flanges70 Flange Bolt Kits72 Full-Faced Flange Gaskets73 Ball Valves75 True Union 2000 Standard Ball Valve - PVC White75 True Union 2000 Standard Ball Valves75 CWV Ball Valves77 Utility Ball Valves77 Single Entry Ball Valves78 Electro Actuated True Union 2000 Standard Ball Valve79 Electro Actuated Compact 2000 Ball Valve79 Check Valves80 Utility Swing Check Valves80 True Union Utility Swing Check Valves80 Compression Utility Swing Check Valves81 Utility Spring Check Valves81 True Union Utility Spring Check Valves82 PVC In-line Adjustable Spring Check Valves8283 EverTUFF® TURF™ Fittings For Golf Course & Turf Applications83 EverTUFF® TURF™ PVC Tees83 EverTUFF® TURF™ PVC Elbows83 EverTUFF® TURF™ PVC Couplings83 EverTUFF® TURF™ PVC Special Reinforced Female Adapters83 EverTUFF® TURF™ PVC Male Adapters83 EverTUFF® TURF™ PVC Reducer Bushings84 EverTUFF® TURF™ CPVC Tees84 EverTUFF® TURF™ CPVC Elbows84 EverTUFF® TURF™ CPVC Couplings84 EverTUFF® TURF™ CPVC Special Reinforced Female Adapters84 EverTUFF® TURF™ CPVC Male Adapters84 EverTUFF® TURF™ CPVC Reducer Bushings84 EverTUFF® TURF™ Mechanical Clamp-on Transition Saddles85 EverTUFF® TURF™ Mechanical Clamp-on Transition Saddles85 EverTUFF® TURF™ Swing Joint Riser Assemblies86 EverTUFF® TURF™ Swing Joint Riser Assemblies88 Turf Swivel Joints94 Turf Swivel Kits95 Turf Swivel Joints96 Compact Turf Swivel Joints96 Pressure Regulated Swivel Joints98 Turf Swivel Joint Replacement Parts98 PVC Irrigation Manifold Systems100 High Strength 1" Manifold Systems101 Four-In-One • Cut-Off Nipples102 Four-In-One • Cut-Off Nipples102 PVC Irrigation Specialty Products103• Hose Fittings • Solvent Weld For Flexible PVC Hose103• Hose Fittings • For 1/2" Polyethylene (.580 I.D.) Hose103 Irrigation Accessories104 Hose Adapters105 Sprinkler Accessories106 Dri-Splice Wire Connectors107 Page V Spears® Manufacturing CompanyProgressive Products from Spears®Innovation and TechnologySpears ® Super SourcebookTABLE OF CONTENTSFilters108Reverse Flow Filters109In-line Tee Style Filters and Reverse In -line Tee Style Filters 111Hose Filters 113PVC Low Head PIP Fabricated Fittings, Risers & Accessories115Couplings 115Non 90° Ells 11590° Ells115Reducer Bushings 115Adapters115Glue-on Saddles 116Caps 117Tees 117Crosses118Riser Extension 118Wyes119DISTRIBUTING GATE RISER 120RITE FLO RISER120DISTRIBUTING GATE REPAIR UNIT 120RITE FLO RISER REPAIR UNIT120PVC 80, 100 & 125 PSI PIP Fabricated Fittings126Tees 12690° Ells129Non 90° Ells 130Couplings132Reducer Couplings 133Crosses 135Wyes137Surface Reducers138Stub Surface Reducers 138Caps139Glue-on Saddles 139Pipe Flanges140PVC Class 63, 100, 125, 160 & 200 IPS Fabricated Fittings & Molded Class 125141Tees 14190° Ells145Non 90° Ells 145Couplings148Reducer Couplings 149Crosses150Surface Reducers 151Caps152Glue-on Saddles152Class 125 Molded Fittings154155Barbed Insert Fittings155Insert Fittings156160PVC, CPVC & PE Nipples160PVC, CPVC & PE Nipples160Four-In-One • Cut-Off Nipples164Four-In-One • Cut-Off Nipples164Made in the U.S.A.Page VIProgressive Products from Spears ®Innovation and TechnologySpears®Super SourcebookTABLE OF CONTENTS165 Industrial Pipe165 Schedule 80 PVC Industrial Pipe165 Low VOC Solvent Cements & Primers166 Spears® Low VOC Solvent Cements & Primers166 PVC Low VOC Cements167 CPVC Low VOC Cements168 Low VOC Solvent Primers & Cleaners169 PVC Schedule 80 Fittings170 Tees170 90° Ells172 Non 90° Ells173 Wyes175 Crosses177 Couplings177 Adapters180 Reducer Bushings181 Caps183 Plugs183 Unions184 Clamp-On & Hot-Tap Saddles188 Mechanical Clamp-On Transition Saddles196 Tank Adapters197 Expansion Joints200 Pipe Flanges201 Van Stone Style Flange Replacement Split Rings204 Flange Insulating Joints205 Flange Bolt Kits205 Full-Faced Flange Gaskets206 PVC Compression & Repair Fittings207 Schedule 80 Repair Fittings207 Compression Couplings207 Gauge & Instrument Fittings, Schedule 80 Specialty Fittings for Sensor Probes209 Gauge Guards209 Gauge & Instrument Fittings Schedule 80 Specialty Fittings for Sensor Probes210 Ball Valves211 True Union 2000 Industrial Ball Valves211 True Union 2000 Industrial Vented/Bleach Ball Valves212 True Union 2000 Industrial 3-Way Ball Valves213 Tee-Style "Zero Dead-Leg" Ball Valves215 True Union 2000 Standard Ball Valves216 True Union 2000 Industrial Retrofit Ball Valves -Replaces Other Brand Valves217 True Union 2000 Industrial Retrofit Ball Valves -Replaces Spears® ''Regular Style'' Valves218 True Union 2000 Standard Retrofit Ball Valves -Replaces Other Brand Valves219 True Union 2000 Standard Retrofit Ball Valves -Replaces Spears® ''Regular Style'' Valves219 True Union Ball Valves (Regular Style)220 Single Entry Ball Valves221 Compact 2000 Ball Valves221 Compact Ball Valves (Regular Style)222 Utility Ball Valves223 Lab Ball Valves223 Check Valves224 True Union 2000 Industrial Ball Check Valves224 True Union Ball Check Valves (Regular Style)225 Foot Valve Screens226 Y-Check Valves226 Butterfly Check Valves228 Industrial Swing Check Valves229 Page VII Spears® Manufacturing CompanyProgressive Products from Spears®Innovation and TechnologySpears ® Super SourcebookTABLE OF CONTENTSIndustrial Swing Check Valve Accessory and Repair Kits 230Diaphragm Check Valves231PVC In-line Adjustable Spring Check Valves 231Gate Valves232Gate Valves232Plug Gate Valves233Butterfly Valves234Butterfly Valves234Lug Insert Butterfly Valves 235True Lug Butterfly Valves236Large Diameter Butterfly Valves 237Wafer Butterfly Valves237Globe and Needle Valves238Globe Valves 238Needle Valves238Diaphragm Valves239Diaphragm Valves239Y-Pattern Valves241Y-Pattern Valves241Industrial Strainers & Filters243In-line Tee-Style Filters 243Y-Strainers245True Union Y-Strainers 247Basket Strainers 250Suction Strainers252253Industrial Pipe253CPVC Industrial Pipe253Low VOC Solvent Cement & Primer254CPVC Low VOC Cements254Low VOC Solvent Primers & Cleaners255CPVC Schedule 80 Fittings256Tees 25690° Ells258Non 90° Ells 259Wyes 261Crosses 262Couplings 263Adapters265Reducer Bushings 266Caps 267Plugs 268Unions268Clamp-On & Hot-Tap Saddles 272Tank Adapters 280Expansion Joints 283Pipe Flanges284Van Stone Style Flange Replacement Split Rings 285Flange Insulating Joints 286Flange Bolt Kits286Full-Faced Flange Gaskets287Gauge & Instrument Fittings, Schedule 80 Specialty Fittings for Sensor Probes288Gauge Guards288Gauge & Instrument Fittings Schedule 80 Specialty Fittings for Sensor Probes289Ball Valves290True Union 2000 Industrial Ball Valves290True Union 2000 Industrial Vented/Bleach Ball Valves291Made in the U.S.A.Page VIIIProgressive Products from Spears ®Innovation and TechnologySpears®Super SourcebookTABLE OF CONTENTSTrue Union 2000 Industrial 3-Way Ball Valves292 Tee-Style "Zero Dead-Leg" Ball Valves294 True Union 2000 Standard Ball Valves295 True Union 2000 Industrial Retrofit Ball Valves -Replaces Other Brand Valves296 True Union 2000 Industrial Retrofit Ball Valves -Replaces Spears® ''Regular Style'' Valves297 True Union 2000 Standard Retrofit Ball Valves -Replaces Other Brand Valves298 True Union 2000 Standard Retrofit Ball Valves -Replaces Spears® ''Regular Style'' Valves298 True Union Ball Valves (Regular Style)299 Compact 2000 Ball Valves300 Compact Ball Valves (Regular Style)301 Utility Ball Valves302 Lab Ball Valves302 Check Valves303 True Union 2000 Industrial Ball Check Valves303 True Union Ball Check Valves (Regular Style)304 Foot Valve Screens304 Y-Check Valves305 Butterfly Check Valves306 Industrial Swing Check Valves307 Diaphragm Check Valves308 Gate Valves309 Gate Valves309 Plug Gate Valves310 Butterfly Valves311 Butterfly Valves311 Lug Insert Butterfly Valves312 True Lug Butterfly Valves313 Large Diameter Butterfly Valves314 Wafer Butterfly Valves314 Globe and Needle Valves315 Globe Valves315 Needle Valves315 Diaphragm Valves316 Diaphragm Valves316 Y-Pattern Valves318 Y-Pattern Valves318 Industrial Strainers & Filters319 In-line Tee-Style Filters319 Y-Strainers321 True Union Y-Strainers322 Basket Strainers324326 Special Reinforced (SR) & Metal Thread Transition Fittings & Adapters326 PVC White Special Reinforced (SR) Fittings327 PVC White Brass Thread Fittings328 PVC Gray Special Reinforced (SR) Fittings329 PVC Gray Brass Thread Fittings333 CPVC Gray Special Reinforced (SR) Fittings334 CPVC Gray Brass Thread Fittings338 CPVC Orange Special Reinforced (SR) Fittings339 CPVC Orange Brass Thread Fittings340 CPVC Orange Brass Grooved Coupling Adapter341 CTS CPVC Tan Special Reinforced (SR) Fittings342 CTS CPVC Tan Brass Thread Fittings342 CTS CPVC Tan Gasket Sealed Thread Fittings343 Blue 75™ Thread Sealant343 Page IX Spears® Manufacturing CompanyProgressive Products from Spears®Innovation and TechnologySpears ® Super SourcebookTABLE OF CONTENTS344Polypropylene Schedule 80 Natural & Black SR Threaded Fittings344Polypropylene Schedule 80 Natural SR Threaded Fittings 345Polypropylene Schedule 80 Black SR Threaded Fittings345Gauge & Instrument Fittings, Schedule 80 Specialty Fittings for Sensor Probes347Gauge Guards347Needle Valves348Needle Valves348Check Valves349Industrial Swing Check Valves349Butterfly Valves350Polypropylene Butterfly Valves350Large Diameter Butterfly and Diaphragm Valves351Large Diameter Butterfly Valves 351Diaphragm Valves352353Ball Valves353True Union 2000 Industrial Ball Valves353True Union 2000 Industrial Vented/Bleach Ball Valves 355True Union 2000 Industrial 3-Way Ball Valves 357Tee-Style "Zero Dead-Leg" Ball Valves 361True Union 2000 Standard Ball Valves362True Union 2000 Industrial Retrofit Ball Valves -Replaces Other Brand Valves364True Union 2000 Industrial Retrofit Ball Valves -Replaces Spears® ''Regular Style'' Valves 365True Union 2000 Standard Retrofit Ball Valves -Replaces Other Brand Valves366True Union 2000 Standard Retrofit Ball Valves -Replaces Spears® ''Regular Style'' Valves 367True Union Ball Valves (Regular Style)367Single Entry Ball Valves 369Compact 2000 Ball Valves370Compact Ball Valves (Regular Style)371Lab Ball Valves 372Utility Ball Valves 373CWV Ball Valves374Swing Check Ball Valve 374CTS Valves375Ball Valve Accessories & Repair Kits376Check Valves386True Union 2000 Industrial Ball Check Valves 386True Union Ball Check Valves (Regular Style)388Foot Valve Screens 389Y-Check Valves389Y-Check Valve Repair Kits 392Butterfly Check Valves393Butterfly Check Valve Repair Kits 395Industrial Swing Check Valves395Industrial Swing Check Valve Accessory and Repair Kits 397Utility Swing Check Valves398True Union Utility Swing Check Valves 398Compression Utility Swing Check Valves 399Utility Spring Check Valves400True Union Utility Spring Check Valves 401Diaphragm Check Valves401PVC In-line Adjustable Spring Check Valves 402Industrial PVC Backwater Valves403Made in the U.S.A.Page XProgressive Products from Spears ®Innovation and TechnologySpears®Super SourcebookTABLE OF CONTENTSSump Pump Swing Check Valve407 Quiet Check Valve407 Swing Check Ball Valve408 Gate Valves409 Gate Valves409 Plug Gate Valves410 Gate Valve Accessories & Repair Kits411 Butterfly Valves413 PVC Pool Butterfly Valves413 Butterfly Valves413 Lug Insert Butterfly Valves414 True Lug Butterfly Valves -Zinc Plated Lugs416 True Lug Butterfly Valves -SS Lugs417 Polypropylene Butterfly Valves419 Large Diameter Butterfly Valves419 Wafer Butterfly Valves420 High Purity TFM-Lined Butterfly Valves421 Butterfly Valve Accessories & Repair Kits422 Globe Valves430 Globe Valves430 Needle Valves431 Needle Valves431 Diaphragm Valves432 Diaphragm Valves432 Diaphragm Valve Repair Kits436 Y-Pattern Valves437 Y-Pattern Valves437 Y-Pattern Valve Repair Kits440 Backwater, Sewage & Sump Pump Specialty Valves441 Sewer Disconnect441 Industrial PVC Backwater Valves442 Sump Pump Swing Check Valve446 Quiet Check Valve446 Swing Check Ball Valve447448 Actuated Valve Information448 Electro Actuated Compact 2000 Ball Valve451 Electro Actuated True Union 2000 Standard Ball Valve452 Electro Actuated True Union 2000 Industrial Ball Valve453 Premium Actuated True Union 2000 Industrial Ball Valve -Electric454 Premium Actuated True Union 2000 Industrial Ball Valve -Pneumatic455 Premium Actuated Standard Butterfly Valve -Electric457 Premium Actuated Standard Butterfly Valve -Pneumatic458 Premium Actuated Lug Insert Butterfly Valve -Electric460 Premium Actuated Lug Insert Butterfly Valve -Pneumatic461 Premium Actuated True Lug Butterfly Valve -Electric463 Premium Actuated True Lug Butterfly Valve -Pneumatic464 Premium Actuated Diaphragm Valve - Electric466 Unitized Actuated Diaphragm Valve - Pneumatic with Plastic Housing469 Premium Actuated Diaphragm Valve - Pneumatic475489 Irrigation & Hose Filters489 Filters489 Hose Filters490Page XI Spears® Manufacturing CompanyProgressive Products from Spears®Innovation and TechnologySpears ® Super SourcebookTABLE OF CONTENTSIn-line Tee Style Filters and Reverse In -line Tee Style Filters 491Reverse Flow Filters 493Industrial Strainers & Filters496In-line Tee-Style Filters 496Y-Strainers498True Union Y-Strainers 500Basket Strainers 504Suction Strainers507508Expansion Joints508Fabricated Expansion Joints 508Elastomer Expansion Joints 510Repair Couplings512Short Repair Couplings514515PVC DWV Drain Waste Vent Fittings515PVC DWV Drain Waste Vent Fittings 515Sewer Disconnect525Industrial PVC Backwater Valves526PVC Schedule 40 & 80 DWV Fabricated Fittings529Tees 52990° Ells529Non 90° Ells 530Couplings531Reducer Couplings 531Crosses 532Wyes533Sanitary Tees 536Adapters 537Caps 537Plugs 537Cleanouts537538EverTUFF® CPVC CTS Fittings, Valves & Pipe538EverTUFF® CPVC CTS Fittings, Valves & Pipe538543Low-Extractable Piping For Ultra-Pure Water Systems543Low-Extractable Piping For Ultra-Pure Water Systems544551LabWaste™ CPVC Corrosive Waste Drainage Systems551LabWaste™ CPVC Corrosive Waste Drainage Systems551LabWaste™ Standard CPVC & HDPE Neutralization Tanks559LabWaste™ Standard HDPE Round Neutralization Tanks 561LabWaste™ Standard CPVC Round Neutralization Tanks 5621-Gallon CPVC Dilution Tanks563Made in the U.S.A.Page XIIProgressive Products from Spears ®Innovation and TechnologySpears®Super SourcebookTABLE OF CONTENTS1-Gallon CPVC Dilution Traps564 Pedestrian Traffic Covers565 Heavy-Duty Pedestrian Traffic Covers565 Vehicular Traffic Covers565 Optional Inspection Manhole Ports & Tank Extensions566 Tank Extensions566 Limestone Chips for Acid Neutralization Tanks566567Lab Specialty Products567 Lab Ball Valves567 Needle Valves567 Gauge Guards569 Lab Fixtures571575PVC & CPVC Duct & Fabricated Duct Fittings575 PVC & CPVC Round Seamless Duct576 PVC & CPVC Cold Rolled Fabricated Duct576 PVC & CPVC Duct Fittings577584Double Containment584 Tees585 90° Ells587 45° Ells589 Couplings591 Access Tees593 Closure Fittings595 Isolation Couplers596 Termination Fittings598 Centralizers600 Ball Valve Box With Valve601 Ball Check Valve Box With Valve603 Diaphragm Valve Box With Valve605 Clamp-on Saddles for Leak Detection Sensors607608PVC Low Head PIP Fabricated Fittings, Risers & Accessories608 Tees608 90° Ells608 Non 90° Ells608 Couplings608 Reducer Bushings609 Adapters609 Crosses609 Riser Extension610 Wyes611 Caps611 Glue-on Saddles612 DISTRIBUTING GATE RISER613 RITE FLO RISER613 DISTRIBUTING GATE REPAIR UNIT613 Page XIII Spears® Manufacturing CompanyProgressive Products from Spears®Innovation and TechnologySpears ® Super SourcebookTABLE OF CONTENTSRITE FLO RISER REPAIR UNIT 613PVC 80, 100 & 125 PSI PIP Fabricated Fittings619Tees 61990° Ells622Non 90° Ells 623Couplings625Reducer Couplings 626Crosses 628Wyes630Surface Reducers631Stub Surface Reducers 631Caps632Glue-on Saddles 632Pipe Flanges633PVC Class 63, 100, 125, 160 & 200 IPS Fabricated Fittings & Molded Class 125634Tees 63490° Ells638Non 90° Ells 638Couplings641Reducer Couplings 642Crosses643Surface Reducers 644Caps645Glue-on Saddles645Class 125 Molded Fittings647PVC Schedule 40 & 80 DWV Fabricated Fittings648Tees 64890° Ells648Non 90° Ells 649Couplings650Reducer Couplings 650Crosses 651Wyes652Sanitary Tees 655Adapters 656Caps 656Plugs 656Cleanouts656PVC Schedule 40 & 80 Low Pressure Fabricated Fittings657Tees 65790° Ells657Non 90° Ells 658Couplings659Reducer Couplings 659Crosses 660Caps 661Plugs661662PVC & CPVC Metric Fittings, Unions & Valves662PN16 PVC Metric Fittings 666PN16 CPVC Metric Fittings666Class 10/12 PVC & CPVC Metric Fittings & Class 150 Flanges667PVC ASTM Schedule 40 Socket x BSP Adapter Fittings (White & Gray)668PVC Transition Unions669True Union Ball Valves (Regular Style)670PVC & CPVC True Union 2000 Industrial Ball Valves 671PVC & CPVC True Union 2000 Standard Ball Valves672PVC & CPVC True Union 2000 Industrial 3-Way Horizontal Diverter Ball Valves673Made in the U.S.A.Page XIVProgressive Products from Spears ®Innovation and TechnologySpears ®Super SourcebookTABLE OF CONTENTS676s e v l a V l l a B l a c i t r e V y a W -3 l a i r t s u d n I 0002 n o i n U e u r T C V P C & C V P 186s e v l a V k c e h C l l a B l a i r t s u d n I 0002 n o i n U e u r T C V P C & C V P PVC & CPVC Gate Valves682PVC & CPVC Diaphragm Valves 683PVC Irrigation Manifold Systems684Pipe686Industrial Pipe686CPVC Industrial Pipe686786e p i P n o i t u b i r t s i D r e t a W d l o C & t o H S T C C V P C Schedule 80 PVC Industrial Pipe 688Schedule 40 Clear Pipe 688Low Extractable PVC Pipe689986e p i P m e t s y S e g a n i a r D e t s a W e v i s o r r o C C V P C ™e t s a W b a L 096e p i P r e l k n i r p S e r i F C V P C ®d r a u G e m a l F PVC & CPVC Round Seamless Duct690196tc u Dde t a c i r b a F d e l l o R d l o C C V P C & C V P Solvent Cements & Thread Sealants692Blue 75™ Thread Sealant692Blue 75™ Thread Sealant692Low VOC Solvent Cements, Primers & Accessories693396s r e m i r P & s t n e m e C t n e v l o S C O V w o L ®s r a e p S PVC Low VOC Cements 694CPVC Low VOC Cements 696ABS Low VOC Cements697ABS to PVC Transition & Mult 896s t n e m e C C O V w o L e s o p r u P i Low Extractable Low VOC Cement 699007s r e n a e l C & s r e m i r P t n e v l o S C O V w o L Applicators & Accessories701FlameGuard® CPVC Fire Sprinkler Products706FlameGuard® CPVC Fire Sprinkler Piping Products706707s t c u d o r P g n i p i P r e l k n i r p S e r i F C V P C ®d r a u G e m a l F FlameGuard® CPVC Fire Sprinkler Piping 217st c u d o r P Page XVSpears ® Manufacturing CompanyProgressive Products from Spears ®Innovation and TechnologyPart Number Index 714AppendicesAppendix A - Basic Abbreviations Used in this CatalogAppendix B - Applicable Industry Standards & Test Methods Appendix C - Product Approvals & CertificatesAppendix D - Recommendations for Installers & Users Appendix E - Special Information on Fabricated FittingsAppendix F - Sustainable Solutions for Total Piping System Needs Appendix G - Discount CodesSchedule 40 Fittings & AccessoriesSpears® Low VOC Solvent Cements & Primersz User Friendly with reduced fumes and odor for well-being of pipe installers.z NSF ® Certified & Listed for use in piping applications such as potable water, turf, irrigation, pool & spa, industrial, plumbing, DWV, and/or sewer,plus special applications including fire protection, chemical waste, and ultra-pure water.z Meets ASTM Standards for solvent cements and primers used for plastic pipe installation.z Environmentally friendly. LEED ® Compliant (Leadership in Energy and Environmental Design). Credit can be gained through the use of Spears ®Low VOC products. This program, developed by the US Green Building Council, uses SCAQMD Rule 1168 as a benchmark to qualify one credit toward LEED ® certification for green building.z Low VOC emissions comply with SCAQMD Rule 1168/316A z 3-Year Shelf LifeEssential solvent cements developed for contractors' essential needs in joining PVC, CPVC and ABS pipe and fittings.Low VOC PVC CementsRegular, Medium, heavy and extra heavy bodied cements are specifically formulated for PVC pipe in virtually every schedule and in sizes with interference fit to 30" diameter.PVC-00 CLEAR: Regular bodied, fast setting PVC cement for all classes and schedules (except Schedule 80) with interference fit through 4". Excellent for plumbing, DWV, irrigation, electrical conduit, pool &spa and PVC foam core pipe. Listings: ASTM D2564,NSF ®-PW, DWV, SW, U.P. Code.PVC-00 Clear Regular Body PVC CementPart Number Size Std Pk Mstr Ctn Disc Code PriceEach PVC00C-0051/4 Pint 240705 5.85PVC00C-0101/2 Pint 2407058.50PVC00C-020Pint 12070513.10PVC00C-030Quart 12070522.10PVC00C-040Gallon6070571.75PVC-02 CLEAR: Regular bodied, fast setting PVC cement for all classes and schedules (except Schedule 80) with interference fit through 4" diameter. Goes on clear, dries clearest and is slightly thicker than PVC-00. Excellent for plumbing, DWV, irrigation, electrical conduit, pool & spa and PVC foam core pipe. Listings:ASTM D2564, NSF ®-PW, DWV, SW, U.P. Code.PVC-02 Clear Regular Body PVC CementPart Number Size Std Pk Mstr Ctn Disc Code Price Each PVC02C-0051/4 Pint 240705 6.50PVC02C-0101/2 Pint 2407059.45PVC02C-020Pint 12070514.55PVC02C-030Quart 12070524.55PVC02C-040Gallon6070579.65PVC-05 CLEAR:Medium bodied, fast setting, PVC cement for all classes and schedules with interference fit through 6" diameter and Schedule 80 through 4"diameter in industrial, plumbing, DWV, irrigation,electrical conduit, pool & spa and PVC foam core pipe.Can be used without primer on non-pressure systems if local code permits. Listings: ASTM D2564, NSF ®-PW, DWV, SW, U.P. Code.PVC-05 Clear Medium Body PVC CementPart Number Size Std Pk Mstr Ctn Disc Code PriceEach PVC05C-0051/4 Pint 240705 6.60PVC05C-0101/2 Pint 2407059.55PVC05C-020Pint 12070516.75PVC05C-030Quart 12070526.65PVC05C-040Gallon6070590.80PVC-21 BLUE:Medium bodied, fast setting, highstrength PVC cement. It is suitable for use on rigid PVC with interference fit Schedule 40 thru 6" and Schedule 80 thru 4". Can be used without primer on PVC Schedule 40 and SDR pressure water piping systems through 4" if local code permits. Do not use PVC-21 without primer in any other application,schedule, or size such as Schedule 80 industrial applications. Listings: ASTM D2564, NSF ®-PW, DWV,SW, U.P. Code.PVC-21 Blue Medium Body PVC CementPart Number Size Std Pk Mstr Ctn Disc Code PriceEach PVC21B-0051/4 Pint 2407057.05PVC21B-0101/2 Pint 24070511.60PVC21B-020Pint 12070519.85PVC21B-030Quart 12070533.35PVC21B-040Gallon60705114.65Made in the U.S.A.NOT FOR DISTRIBUTION OF COMPRESSED AIR OR GAS Page 1Progressive Products from Spears ®Innovation and Technology。

管道材料专业中英文词汇要点

------------------------------------------------------管道专业词汇-------------------------------------------------时间：2007-9-13 8:36:311.阀门类1.1 常用阀闸阀Gate valve截止阀（球心阀）Globe valve节流阀Throttle valve TRV针型阀Needle valve角阀（角式截止阀）Angle valveY 型阀（Y 型截止阀）Y-valve (Y-body globe valve)球阀Ball valve三通球阀3-Way ball valve蝶阀Butterfly valve柱塞阀Piston type valve旋塞阀Plug valve三通旋塞阀3-Way cock valve旋塞Cock隔膜阀Diaphragm valve夹紧式胶管阀pinch valve止回阀Check valve1.2 其它阀安全泄汽阀（安全阀）Safety valve SV安全泄液阀（卸荷阀）Relief valve安全泄压阀Safety relief valve罐底排污阀Flush-bottom tank valve波纹管密封阀Bellow sealed valve电磁阀Solenoid valve电动阀Electrically operated valve气动阀Pneumatic operated valve低温用阀Cryogenic service valve蒸汽疏水阀Steam trap T呼吸阀Breather valve减压阀Reducing valve RV控制阀 .调节阀Control valve1.3 不表明结构的阀切断阀Block valve, Shut-off valve, Stop valve手动控制阀Hand control valve HCV调节阀Regulating valve快开阀Quick opening valve快闭阀Quick closing valve隔断阀Isolating valve三通阀3-Way valve夹套阀Jacketed valve排污阀Blowdown valve排液阀Drain valve放空阀Vent valve VTV卸载阀Unloading valve排出阀Discharge valve吸入阀Suction valve多路阀Multiport valve取样阀Sampling valve手动阀Hand operated valve, Manually operated valve 旁路阀By-pass valve冲洗阀Flush valve根部阀Root valve, Primary valve, Header valve底阀Foot valve2.管子与连接2.1 管子管子（标准规格）Pipe管子（非标规格）Tube钢管Steel pipe铸铁管Cast iron pipe衬里管Lined pipe复合管（包复金属管）Clad pipe碳钢管Carbon pipe合金钢管Alloy steel pipe不锈钢管Stainless steel valve奥氏体不锈钢管Austenitic stainless steel pipe铁素体合金钢管Ferric alloy steel pipe无缝钢管Seamless steel pipe焊接钢管Welded steel pipe镀锌钢管Galvanized steel pipe水煤气钢管Water-gas steel pipe塑料管Plastic pipe玻璃管Glass tube橡胶管Rubber tube壁厚系列号（管子表号）Schedule number Sch.NO壁厚Wall thickness W.T2.2 管子零件弯头Elbow异径弯头Reducing elbow长半径弯头Long radius elbow LRE短半径弯头Short radius elbow SRE180°弯头（回弯头）Return elbow三通（T 型三通）Tee异径三通Reducing tee等径三通Straight tee45°三通450Lateral正三通（Y 型三通）True"Y"四通（十字通）Cross异径管（大小头）Reducer RED同心异径管Concentric reducer CON偏心异径管Eccentric reducer ECC支管连接Branch connection支管台（凹台）Boss活接头Union管接头（管箍）Couling, Full coupling管帽Cap C短节（短管）Nipple NIP管堵（丝堵）Plug PLG焊接管帽welded cap WC盲板，管道盲板Blank, Blind, Line blank L.B 8 字盲板Spectacle blank特殊管件Special pipe fittings S.P2.3 连接对焊的Butt welded BW法兰的Flanged FLGD螺纹的Threaded THD承插焊的Socket welded SW承插的Belled对焊连接Butt welded joint BW法兰连接Flanged joint螺纹连接Threaded joint T管螺纹连接Pipe threaded joint承插焊连接Socket welding flange SW承插连接，套筒连接Bell and spigot joint整体法兰Integral pipe flange螺纹法兰Threaded flange THDF承插焊法兰Socket welding flange松套法兰Lap joint flange LJF对焊法兰Weld neck flange WNF平焊法兰Slip on flange, Slip on weld flange 板式平焊法兰Welding plate flange松套板式法兰Loose plate flange滑套法兰（平焊法兰）Slip-on-welding flange 法兰盖Blind flange,Blind孔板法兰Orifice flange异径法兰Reducing flange BCD螺拴圆直径Bolt circle diameter法兰面Flange facing,facing of flange FOF光面，光滑面Plain face PF突面Raised face RF凹凸面Male-female(Seal contact )face MFM凸面Male face MF凹面Female face FMF榫槽面Tongue groove face TGF榫面Tongue face TF槽面Groove face GF环连接面，梯型槽密封面Ring joint face RJF 全平面，满平面Flat face,Full face FF光滑突面Smooth raised face SRF螺拴热紧Bolt hot tightening螺拴冷紧Bolt cold tightening螺纹管帽Threaded cap THDC螺纹焊管座Threaded let THLET承插焊管帽Socket welded cap SWC承插焊管座Socket welded let SWLET垫片Gasket非金属包覆垫片Non-metallic jacked gasket金属包覆垫片Metallic jacket gasket缠绕式垫片Spiral wound gasket内环Inner ring外环Outer ring金属垫片Metallic gasket3. 管道附件3.1 组件气液分离器Gas-liquid separation阻火器Flame arrested(Flame trap)临时粗滤器Temporary strainer永久粗滤器（固定粗滤器）Permanent strainer Y 型粗滤器Y-type strainerT 型粗滤器T-type strainer网状粗滤器Gauge strainer粗滤器Strainer过滤器Filter永久过滤器Permanent filter消音器（消声器）Silencer视镜Sight glass(Sight flow glass)浮球式视镜Floating ball sight flow indicator全视镜Full view sigh flow indicator取样冷却器Sample cooler喷嘴，喷头Spray nozzle喷射器Ejector洗眼器Eye washer E.W膨胀节（伸缩接头）Expansion joint波纹膨胀节Bellow expansion joint球型补偿器Ball type expansion joint填函式补偿器Slip type(packed type)expansion joint 安全淋浴器Safety shower S.S3.2 元件排液漏斗Drain funnel漏斗Funnel爆破板Rupture disk RP限流孔板Restriction orifice RO混合孔板Mixing orifice软管接头Hose connection HC金属软管Metal hose橡胶管Rubber hose挠性管（柔性管）Flexible hose快速接头Quick coupling旋转接头Swivel joint减压器Reducer RED4. 材料4.1 金属材料碳钢Carbon steel C.S合金钢Alloy steel合金结构钢Structural alloy steel工具钢Tool steel不锈钢Stainless steel S.S奥氏体不锈钢Austenitic stainless steel马氏体不锈钢Martensitic stainless steel锻钢Forged steel铸钢Cast steel铸铁Cast iron C.I灰铸铁Grey cast iron可锻铸铁Malleable iron M.I球墨铸铁Nodular cast iron, Nodular cast graphite iron高硅铸铁High silicon cast iron铝Aluminum铜Copper黄铜Brass铝镁合金Aluminum magnesium蒙乃尔合金(镍铜合金) Monel钛Titanium铅Lead型钢Shaped steel角钢Angle steel槽钢Channel工字钢(工字梁) I-Beam宽翼线工字钢(H 钢) Wide flanged beamT 字钢T-Bar方钢Square Bar扁钢Flat Bar园钢Round steel,rod钢带Strap steel钢板Plate网纹钢板Checkered plate4.2 非金属材料塑料Plastic丙烯睛.丁二烯.苯乙烯橡胶Acrylonitrile-butadiene-styrene rubber ABS 聚乙烯Polyethylene PE聚氯乙烯Ploy vinyl chloride PVC氯化聚氯乙烯Chlorinated ploy vinyl chloride CPVC聚丙烯Polypropylene PP聚苯乙烯Polystyrene PS氯化聚醚Chlorinated polyether CPE聚碳酸酯Polycarbonate PC有机玻璃Poly methyl methacrylate PMMA聚四氟乙烯Polytetrafluoroethlene PTFE碳纤维Carbon fiber CAR聚三氟氯乙烯Poly chlorotrifluoroethylene PCTFE氯化聚乙烯Chlorinated poly ethylene CPE;CM氯磺化聚乙烯Chlorosulfonated polyethylene CSM;CSPR环氧树脂Epoxy resin EP泡沫聚苯乙烯Expanded poly styrene EPS玻璃纤维增强聚酯Glass fiber reinforced polyester FRP丁腈橡胶Nitride butadiene rubber NBR氯丁橡胶Neoprene rubber天然橡胶Natural rubber NR丁基橡胶Butyl rubber PIBI丁苯橡胶Styrene-Butadiene rubber SBR顺丁橡胶Cis-polybutadiene rubber CBR不饱和聚酯Unsaturated polyester UP聚氨酯Polyurethane PU耐火砖Fire brick陶瓷Ceramic搪瓷Porcelain enamel石棉Asbest5. 设备安装5.1 布置装置边界Battery limit B.L边界内Inside battery limit I.S.B.L边界外Outside battery limit O.S.B.L.中心线Center line接续线Match line M.L.设备布置Equipment arrangment; Equipment layoutlot plan 标高,高程,立面图Elevation EL绝对标高Absolute elevation坐标Coordinate坐标原点Origin of coordinate装置北Plant north真实北true north TN方位Orientation危险区Hazardous area铺砌区Paving area非铺砌区Unpaving area楼面Floor地面标高Ground level GL平台Platform PF场地Yard管廊Pipe rack电缆槽(架) Cable tray(channel)建筑物Building钢结构Steel structure基础Foundation柱Colun; Post; Stanchion梁Beam桁架Girder墙Wall篦子板Grate; Grating吊装孔Erection opening吊梁Hoisting beam HB架顶面Top of support TOS钢结构顶面Top of steel TOS混凝土顶面Top of concrete TOC梁顶面Top of Beam TOB板表面Plat face PLATF吊勾Hook顶面,上面Top TOP底面,底下Bottom BOT支撑点Point of support POS固定点Fixed point FP建筑北Construction north设计北Design north DN电缆沟Electric cable duct; Electrical trench管沟Pipe trench明沟Open trench明火地点Open fire place散发火花地点Send-out spark place防火间距fire protection spacing支架间距Support spacing地面坡度Ground grade吊装孔Erection opening道路Road地面Ground;Ground level GRD内径Inside Diameter ID外径Outside Diameter OD公称直径Nominal diameter;Nominal(pipe)size DN 公称压力Nominal pressure PN切线Tangent line TL中心线Center line门Gate窗Window地下Under ground UG底板底面Bottom of base plate BBP控置室Control room分析室Analyzer配电室Substation变压器室Transformer room通风室Ventilation room更衣室Locker room贮藏室Storage room维修室Maintenance room盥洗室,厕所Closte;Toilet;Washroom W.C办工室Office门卫室,传达室Entrance guard room;Janitor's room 接待室,会客室Reception room地秤室Weigh-bridge room泵房Pump houseump room压缩机室Compressor house(room)电池室Battery room消防栓Fire plug FPL电气盘Electrical panel仪表盘Instrument panel就地盘Local panel5.2 设备塔Tower;Column洗涤塔Scrubber吸收塔Absorber冷却塔Cooling tower精馏塔Fractionating tower换热器Heat exchanger空冷器Air cooler水冷却器Water cooler冷却器Condenser螺旋板换热器Spiral plate exchanger套管换热器Double pipe heat exchanger石墨换热器Graphite heat exchanger板片换热器Plate type heat exchanger板翅式换热器Plate-fin heat exchanger板式塔Plate tower填料塔Floating distillation tower浮阀塔Valve tower反应器Reactor贮罐Tank缓冲器Knock-out drum混合罐Mixing tank(drum)浮顶罐Floating roof tankontoon roof tank内浮顶罐Floating internal roof tank固定顶罐Stationary roof tank卧式储罐Horizontal tank球罐Spheroid;Spherical tank罐,鼓,筒,桶Drum气柜Gas bolder螺旋式气柜Helical gas-holder湿式气柜Wet gas holder干式气柜Dry gas- holder离心泵Centrifugal pump涡轮泵Turbine pump旋涡泵Vortex pump转子泵Rotary pump齿轮泵Gear pump内啮合齿轮泵Internal gear rotary pump;Crescen gear pump 螺杆泵Screw pump柱塞泵Plunger pump双作用往复泵Double action reciprocating pump计量泵,定量泵Metering pump泥浆泵Slurry pump;Sludge pump;Mud pump管道泵Inline pump手摇泵Hand pump; Wobble pump深井泵Deep well pump输送泵Transfer pump; Delivery pump屏蔽泵Shielding can-type pump; Canned pump液下泵Submerged pump; Submersible pump潜水泵Submerged pump; Immersible pump多级泵Stage pump; Multistage pump立式泵Vertical pump;磁力泵Magnetic transmission pump; Magnetic coupled pump 气动泵Pneumatic pump轴流泵Axial flow pump混流泵Mixed flow pump陶瓷泵Ceramic pump陶制泵Stoneware pump自吸泵Self suction pump; Self priming pump消防泵Fire pump真空泵Vacuum pump叶片式真空泵Vane vacuum pump水环式真空泵(压缩机) Water ring vacuum pump(compressor) 液环泵(压缩机) Liquid ring pump(compressor)活塞式压缩机Piston compressor螺杆压缩机Helical screw compressor离心压缩机Centrifugal compressor多级压缩机Multiple stages compressor往复式压缩机Reciprocating compressor风机,风扇Fan; Van鼓风机Blower离心机Centrifuger离心分离机Centrifugal separator离心过滤机centrifugal filter压滤机Pressure filter板框式压滤机Plate and frame filter press厢式压滤机Box type filer press带式过滤机Belt filter转鼓式过滤机Rotating drum type filter盘式过滤机Tray filter板式塔Plate tower填料塔Packed tower; Packed column浮阀塔Valve tower; Floating distillation tower带式(皮带)运输机Ribbon conveyer; Belt conveyer螺旋输送机Screw convery; Spirla conveyer; Worm conveyer 加热器Heater搅拌器Agitator炉子Furnace烟囱Stack火炬Flare锅炉Boiler发电机Generator汽轮机Steam turbine电动机Motor起重机,吊车Crane板式起重机Bridge crane吊车梁Crane beam; Hoist beam电动葫芦Motor hoist; Electric hoist; Electric block成套设备Package unit附属设备,附件Attachment equipment干燥器Dryer混合器Mixer蒸发器Evaporator萃取器Extractor结晶器Crystalliger澄清器Gravity settler喷射器Ejector喷头Sprayer分离器Separator旋风分离器,旋风除尘器Cyclone;Cyclone separator device 布袋收尘器Cloth envelop collection电除尘器Electrostatic precipitator; Electridust precipitator除尘器,吸尘器Duster; Dust arrester振动筛Vibrating screen;Riddler;Oscillating sieve破碎机Breaker; Cracker mill; Crusher; Crushing mill颚式破碎机Jaw breaker; Jaw crusher; Alligator粉碎机,磨碎机Grinder; Pulverizer; Disintegrator;Atomizer 提升机,卷扬机Hoister; Lifter; Gig; Elevator斗式提升机Bucket elevator电梯Electrical lift; Elevator泡沫站Foam station软管站Hose station H.S6. 管道布置6.1 设计文件管道布置Piping assembly; Piping layout管道布置平面Piping arrangement plan PAP管道研究Piping study"X" 视图View "X""A-A" 视图Section "A-A"详图Detail drawing轴测图,空视图Isometric drawing索引图Key plan接续图Continue on drawing COD管道及仪表流程图Piping and Instrument diagram P&ID 工艺控制图Process control diagram工艺流程图Process flow diagram公用工程流程图Utility flow diagram UFD总图Genera plan总平面布置图General arrangement plan放大图Enlarged view节点Node地上Above ground AG地下Under ground UG地面Ground GRD附图Figue草图Sketch图例Legend符号Symbol比例Scale蒸汽伴管Steam tracing热水伴管Hot-water tracing电伴热Electrical tracing夹套管Jacketed tracing高压High pressure H.P.中压Medium pressure M.P.低压Low pressure L.P.大气,大气压Atmosphere ATM工作压力,操作压力Operating pressure; Working pressure 设计压力Design pressure工作温度,操作温度Operating temperature设计温度Design temperature管口Nozzle取样接口Sampling connection S.C清除口,清洗口Clean out C.O排出口Exhaust出口Outlet; Discharge DISCH入口Inlet; suction INLET连接,接头Connection管口方位Nozzle orientation排液Drain放空Vent VENT污水坑,污水池Sump pit地坑,井Pit地漏Floor drain F.D下水管Sewer人孔Manhole M.H手孔Handhole H.H关闭后加铅封(封关) Car seal close C.S.C开启后加铅封(封开) Car seal open C.S.O关闭后加锁(锁关) Locked closed L.C开启后加锁(锁开) Locked closed L.O正常时关闭Normally close N.C正常时开启Normally open N.O故障时关闭Valve closes on failure of actuating energy FC 故障时开启Valve opens on failure of actuating energy FO 垂直,正交Perpendicular平行Parallel管顶Top of pipe TOP管底Bottom of pipe BOP管内底Invert,Inside bottom of pipe INV底平Flat on bottom FOB顶平Flat on top FOT水平的,卧式的Horizontal HOR立式的,垂直的Vertical VERT水平安装Horizontal installation垂直安装Vertical installation管件直连Fitting to fitting FTF管间距Line spacing管道跨距Line span管道等级Piping class管道材料规定Piping material specification等级分界Material Specification break隔热分界Insulation break管道附件Piping attachment管道元件Piping element面至面Face to Face F-F中心至面Center to Face C-F中心至中心Center to Center C-C中心至端面Center to End C-E坡度Slope; Grade公称直径Nominal Diameter DN公称压力Nominal pressure PN外径Outside Diameter OD内径Inside Diameter ID螺栓圆直径Bolt circle B.C软管接头Hose connection HC管段,短管Spool piece; Spool可拆短管Removable joint spool RSP直管Run pipe; Straight pipe弯管Bend管内底标高Invert elevation IE不许出现袋形Not allow pocket NO.P孔板Orifice plate孔,洞Hole低点标高Low point elevation LP.LE低点Low point LP高点High point HP平台Platform; Flat; Floor; Surface plate PF 袋形管Bag-Shape pipe外壳(outside)Shell;Case(shell);Casing;Cover 6.2 管道安装管托Shoe管卡Clamp管架Piping support支耳LugU 型卡Clevice带状卡Strap clamp托座Stool吊耳Ear导向板,夹板Cleat底板Base plate顶板Top plate予埋件Embedded part; Inserted plate支承环Ring加强板Stiffener垫片(垫平用) Shim锚固件Clip预焊件(设备上) Clip(on equipment)聚四氟乙烯滑动板PTFE sliding plate连接板Tie plate连接杆Tie rod限制杆Limit rod鞍座Saddle裙座Skirt支承架Resting support滑动架Sliding support固定架Anchor导向架Guide吊架Hanger弹簧架Spring support弹簧托Resting type spring support 弹簧吊架Spring hanger恒力吊架Constant hanger滚动支架Rolling hanger减振器Snubber悬臂架Cantilever support三角架Triangular support支腿Legn 型管架n-type supportL 型管架L-type support柱式管架Pole type support墙架Support on wall管墩,低管架Sleeper特殊管架Special support(予埋螺栓)伸出长度Extrusion对中心,找正Alignment跨度Span力矩Moment弯矩Bending moment扭矩Torque荷载Load反力Reaction位移Displacement角位移Angular rotation冷紧,冷拉Cold spring约束Restraint固定点Fix point; Anchor point应力Stress惯性矩Moment of inertia断面系数Section modules安全系数Safety factor6.3 焊接与热处理电弧焊Arc welding电熔焊Electric fusion welding EFW气熔焊Fusion gas welding FGW电阻焊Electric resistance welding ERW气焊Gas welding; flame welding等离子焊Plasma welding电渣焊Electroslag welding焊条Welding electrode(rod)焊丝Welding wire平焊Flat welding角焊Fillet welding间断焊Intermittent welding点焊Spot welding对焊Butt welding搭焊Lap welding现场焊Field weld F.W工厂(车间)焊接Shop weld坡口Groove无损检验Non-Destruction testing肉眼检验,外观检验Visual testing超声波探伤Ultrasonic test磁粉探伤Magnetic particle test荧光渗透试验Fluorescent penetrate inspection 水压试验Hydraulic testing气压试验Pneumatic testing退火Annealing回火Tempering正火Normalizing淬火Quenching调质Quenching and tempering高频淬火Induction hardening渗氮Nitrogen case-hardening渗碳Carbonization6.4 隔热及涂漆玻璃棉Glass wool岩棉Rock wool泡沫玻璃Foam glass; Cellular glass硅酸钙Calcium silicate硅酸铝纤维Aluminosilicace fiber珍珠岩Perlite泡沫混凝土Foamed concrete; Cellular concrete 蛭石Vermiculite矿渣棉Mineral wool硅藻土Kieselguhr; Diatomite石棉板Asbestos board石棉布Asbestos cloth聚氨酯Polyurethane泡沫聚苯乙烯Cellular polystyrene玻璃布Glass(fiber) cloth沥青Asphalt油毡Asphalt felt镀锌铁丝Galvanized wire镀锌铁丝网Galvanized wire mesh管壳Shell毡(被) Blanket镀锌铁皮Galvanized (sheet) iron铝板Aluminum sheet隔热,隔离,绝缘Insulation INS保温Hot instruction保冷Cold instruction人身保护Personal protection隔音Sound insulation吸声Sound-absorbing导热系数Thermal conductivity factor 支承环Support ring分贝Decibel涂漆Painting底漆Primary coat; Bottom coat面漆Finishing coat防锈漆Antirust paint醇酸瓷漆Alkyd enamel酚醛漆Phenolic paint沥青漆Bituminous paint聚氨酯漆Polyurethane paint有机硅漆Organic silicon paint环氧树脂漆Epoxy resin paint过氯乙烯漆Ethylene perchloride paint 无机富锌漆Inorganic zinc-rich paint6.5 紧固件螺栓Bolt六角头螺栓Hexagonal head bolt方头螺栓Square head bolt双头螺栓Stud bolt环头螺栓Eye bolt沉头螺栓Countersunk(head) screw 地脚螺栓Anchor bolt; Foundation bolt 松紧节,花兰螺栓TurnbuckleU 型螺栓U-boltT 型螺栓T-bolt自攻螺钉Self tapping screw膨胀螺栓Expansion bolt六角螺母Hexagonal nut方螺母Square washer蝶形螺母Wing nut锁紧螺母Lock nut垫圈Washer方垫圈Square Washer斜垫圈Slant Washer弹簧垫圈Spring washer开口销Cotter pin定位销Dowel pin铆钉Rivet右螺纹Right hand thread管螺纹Pipe thread锥管螺纹Taper pipe thread直管螺纹Straight pipe thread美国标准直管螺纹American standard taper pipe thread NPT 管子内螺纹Internal pipe thread IPT梯形螺纹Trapezoid thread公制螺纹Metric thread粗牙螺纹Coarse thread通长螺纹,全螺纹Full thread粗制的Coarse精制的Finished; Fine7. 相关词语基础设计Basic design详细设计Detail design规划布置阶段Planning stage初步阶段Preliminary stage分析设计阶段Analytical Engineering phase成品设计阶段Production design phase先期确认图纸资料Advanced certified final ACF最终确认图纸资料Certified final CF数据表Data sheet设计文件Design document设计注释Design note设计规定Design specification SPEC设计规定汇总表Design specification summary sheet DSSS 详细设计版Detail design issue DDI用户变更通知Client change notice CCN命名表,管道表Nomenclature规划研究版设计布置图Planning plot plan概略版设备布置图Conceptual plot plan投标版设备布置图Proposal plot plan合同版设备布置图Award plot plan送审版设备布置图Approval plot plan成品版设备布置图Production plot plan施工版设备布置图Construction plot plan工作程序Working procedure界区条件Battery limit condition标准Standard STD;STAND参考,基准Reference开工会议Kick-off meeting K.O.M项目审核会Project review meeting厂商协调会Vender co-ordinative meeting VCM 项目进展情况报告Project status report PSR顾客Client; Customer承包Contractor安装Erection建设Construction试车Commissioning说明Description待定Hold版次Issue修改,修订Revision; Modify REV审核提纲Check list审定Approved APVD校核Checked CHKD制图By BY部门Department部,科,室Division专业Discipline图号Drawing number DWG.No.项目Project项目号Job No. Job.No.工厂,装置Plant买方(供货) By buyer B.B卖方(供货) By seller B.S制造厂(供货) By vender B.V由仪表(专业负责) By instrument B.INST铭牌Name plate询价Inquire净正吸入压头Net positive suction head静电接地Static grounding分散控制系统Distributed Control Systems DCS附件Attachment合同号Contract number Cont.No.外汇Foreign exchange备忘录Memorandum公章Official seal索赔Claim indemnity交货付款Cash on delivery C.O.D摄氏Centigrade C华氏Fahrenheit F国际单位制System International SI美国材料试验协会American Society for Testing and Materials ASTM 阀门及配件制造工业标准化协会(美)Manufacturers'Standardization Society of Valve and Fittings Industry MSS全国消防协会(美) National Fire Protection Association NFPA石油管线协会(美) Association of Oil Pipe Lines AOPL美国国家标准协会(美) American National Standard Institute ANSI美国机械工程师学会American Society of Mechanical Engineers ASME 美国仪表学会Instrument Society of American ISA全国电气制造商协会(美) National Electrical Manufactures Association NEMA日本工业标准Japanese Industrial Standard JIS加拿大标准协会Canadian Standard Association CAS英国标准British Standard BS德国工业标准Deutsche Industrie Norm DIN缩写词英文名称中文名称BB bolted bonnet 螺栓连接的阀盖BE beveled end 坡口BC bolted cover 螺栓连接的阀帽BW butt welding 对焊CON concentric 同心CS carbon steel 碳钢DSAW double submerged arc weld 双面埋弧焊ECC eccentric 偏心EFW electric fusion welding 电熔焊FB.L.OP 全通径手动操作GALV galvanized 镀锌的GRAF graphite 石墨HEX hexagonal 六角IR inner ring 内定位环LR long radius 长半径NPT national standard taper pipe thread 60°锥管内螺纹O.D. outside diameter 外径OR outer ring 外定位环OS&Y outside screw and yoke 明杆支架型PBE plain both ends 两端平口PE plain end 平口PSB pressure seal bonnet 压力密封阀盖PSE plain small end 小端平面PTFE "teflon" 聚四氟乙烯RED reduced 异径的RF raised face 突面TB threaded bonnet 螺纹连接的阀盖TBE threaded both ends 两端螺纹THR thread 螺纹TOE thread one end 一端螺纹TRI-ECC Thr-eccentric 三偏心TRIM 阀门内件SAW submerged arc weld 埋弧焊SMLS seamless 无缝的SO slip-on 平焊SR short radius 短半径STL stellite 司太立合金SS stainless steel 不锈钢SW socket welding 承插焊WN welding neck 对焊。

Synopsys OptoDesigner 2020.09安装指南说明书

Accidental full scan proliferation by a build server farm..................................................................... 25 Solution......................................................................................................................................25
3. Troubleshooting scanning issues........................................................25
Accidental full scan proliferation by folder paths which include build or commit ID............................ 25 Solution......................................................................................................................................25
Contents
Contents
Preface....................................................................................................5
1. Scanning best practices......................................................................... 8

真空设备常见英文单词

真空设备常见英文单词transducer 传感器air cylinder气缸breaker,circuit,contactor 断路器abb contactor, power module 断路器, 电源模块ace absorber,shock 防震, 缓冲器acme transformer; contactor 变压器acopian power supply 电源供应器, 变压器aeg level transmitter, encoder 液位控制, 译码器aerquip hose, fitting 压力喉, 喉头, 喉咀agastat thermostate, thermocouple 恒温装置, 温度计airguard filter 过滤网airpel cylinder cylinder, valve 气缸､阀门airpot cylinder air cylinder 气缸､. 气阀anly counter, timer,socket 计数器, 时间制, 插座anver vacuum pad, air pump 真空吸索､真空泵appllo valve,bronze ball 球阀门asco valve valve 阀门ash worth sprocket 齿轮, 齿条atosvalve valve , pressure guage 油压阀auto guard controler,temperture 温度控制仪autotech controller, pls, encoder 角度控制器, 译码器bacber-colman temperature controller 温度装置baldor motor motor 马达电机baluff sensor sensor, switch 传感器banner sensor photo sensor; fiber, light curtain 传感器, 光织, 光帘barksdale switch,pressure 压力开关baumer sensor proximity sensor, fiber 接近开关､光织belvac machine parts 包装业零件bimba cylinder cylinder 气缸bodine motor pinch roll motor, controller, gear box 马达borns mexico sensor, micro switch 传感器brap haprison cable,joy hand held switch, 电路开关bray series valva,butterfly 蝴蝶阀brook crompton linear motor, gear box,pump motor 防爆马达browning belt,poly-v 工业皮带bussmann fuse fuse 保险丝carlo gavazzi sensor 传感器cb boiler parts, filter 锅炉配件, 过泸器chicago switch,airflow 气流开关cincinnati coupling,quick disconnet 连接器, 快速接头clarostat resistor, vr 卷烟机器用电阻crouzet counter, timer, relay 计数器, 时间制, 继电器crydom push buttom, switch 按手掣, 开关c-tek counter, timer,socket 计数器, 时间制, 插座cutler-hammer sensor, micro switch 微动开关cyklop machine parts 包装业零件datalogic sensor photo sensor, fiber sensor 红外线电眼, 光导纤维dayton motor 马达电机delta design ic manufacturing spare parts 半导体机械配件diamond chain, roller. bush 钻石牌产品dodge bearing 啤令, 轴承dolan jenner optical fiber; light sources; ringlights 光导纤维dominic anrep photo switch, fiber controller 光电开关dongag transformer 变压器durant run time meter, counter 时间制､计数器dynapar ph transmitter, gauging sys 酸碱度计, 测厚仪eagle-signal potentiometer; positioning 比例电平器eao switch push buttom, switch, lamp 按钮开关, 指示灯eaton dyna motor; speed control motor 马达控制器electromatic flow switch, level controller 流量计､液位控制emerson motor motor, speed control 调速器, 马达enots sleeve,tubing 轴承, 衬套entrelec terminal 端子器, 接头esta sequencer, tachometer 程控器, 译码器euchner sensor, positioning control 传感器, 定位装置fafnir bearing,pillow block 啤令, 轴承, 衬套fasco motor gear box, motor 马达fenner temperature controller 温控器fincor membrane keypad 膜片开关formatec machine parts 包装业零件fuji electric motor, contactor, relay 马达, 断路器, 继电器g.p.reeves machine parts 机械配件g0ldco machine parts 机械配件gast gauge,vacuum 表头, 主控制器ge fanuc motor , controller 马达, 控制器gordos pump, motor 泵, 马达gould machine parts 包装业零件guardian switch, relay 继电器hekeda ultrasonic cleaning machine 超声波清洗机heviduty transformer 变压器honeywell temp controller, sensor, sw 温控器, 开关hubble connector, socket 美国插头､连接头hyde park ultronsonic sensor 超声波传感器hydra pump, valve 泵, 阀门idec relay, lamp, push button 继电器, 指示灯, 按手旋钮ifm photo sensor, proximity sensor, encoder 近接开关, 译码器international. cam actuator, switch 凸轮驱动器, 开关intralox sprocket, belt 齿轮, 齿条, 皮带jefferson elect valve, fitting , hydraulic 液压控制系统, 阀门, 接咀jordan valae,pressure reducing 减压阀joslyn clark dc contactor, auxiliary contact 连接器kessler ellis hydraulic tube, vacuum pump 油管, 真空泵keyence sensor 传感器keystone sprockets 齿轮, 齿条, 皮带kfps proximity sensor 近接开关kitalcoppie thermocouple , temp control 热电隅, 温控器koganei penumatic valve, cylinder, fitting 气缸, 阀门, 接咀koyo cylinder 气缸, 阀门, 接咀leeson motor motor, reducer, spped control 马达, 减速箱, 控制器leuze sensor 传感器little giant vacuum pump 小巨人磁力泵litton motor motor 马达lundahl inst'mt sensor, ultrasonic, level cont 电眼､液位检测器mac solenoid valve, air fitting 电磁阀､气缸､过滤器magnetek variable speed motor; motor controller 调速马达malema flow sensor, flow switch 流量计､流量开关master pneumatic pneumatic product 气动组件maxon ignitor,spark, rod flame 火焰检测器mcgill bearing , bush 啤令, 杯士, 衬套meanwell p.sup power,supply 电源供应器, 变压器meto-fer proximity sw, sensing element 近接开关micro switch micro switch; guard switch 微动开关migatron ultronsonic sensor 超声波传感器milltronics fluidic motion control 液压控制系统minster machine parts 机械配件mitsubishi plc, contractor 编程器, 接触器moeller contactor relay, contactor 继电器, 接触器naeherung proximity switch, micro switch 微动开关namco sensor, switch 传感器national sensor, switch, relay 传感器, 微动开关new york blowe bearing, shaft 啤令, 硬轴newark potentiometer; actuator 电位器newport cylinder, valve , fitting 气缸, 阀门, 接咀norgen penumatic air cylinder, fitting, frl 气动组件ntn bearing bearing , bush 啤令, 衬套numatics calve, cylinder 阀门, 气缸ohmite resistor vr 卷烟机用可调电阻omega equipment control equipment 控制仪器omron sensor, plc 传感器opcon sensor 传感器oriental motors motor, gerabox, ac/dc control 马达, 减速箱, 控制器orion lab test equipment 实验室仪器paco detector,flame 火焰检测器palmer gauge,pressure 压力表panduit conductor, resistor 导线, 电阻parker fitting, o-ring , valve 密封圈, 接咀, 阀门partlow control meter 温控表peco sensor 传感器pepperl & fuchs sensor 传感器phoenix contact relay contactor 继电器, 接触器piab penumatic vacuum pump, suction pad 真空泵, 吸盘pittman motor mini motor 小型马达potter & brumfd time delay relay, relay 继电器, 时间延迟器prime double sheet detector 双金属片检定器protection system protection device 系统保护装置ragsdale machine parts 机械配件randolph alcoa machine parts 机械配件rechner sensor ,proximity 接近开关red lion actual stroke counter, counter timer 时间制, 温控器redicon bearing, filter, valve ,sensor 机械配件renco encoder 译码器rexnord chain & belt,sprocket 链条, 皮带, 齿轮reynolds machine parts 机械配件riese nozzle jet 喷咀rittal motor, control device 马达控制器rk electronics rocker sw, rotary 摇臂开关rkc temperature controller 温控表robroy industries bearing, bush 啤令, 杯士, 衬套rosemount valve valve 阀门ross valve valve 阀门rutherford machine parts 机械配件ryall machine parts 机械配件saftronics motor starter, motor 马达samson valve 阀门sanken frequency inverter 变频器scanner scanning device, photo sensor 光电开关schonbuch photo sensor, proximity sensor, plc 光电开关､编程器sealmaster bearings,pillow block 啤令seco motor , transformer 马达, 变压器sencon proximity sensor, managetic sensor 传感器sensortronics cable 电缆sentec sensor 传感器sick sensor sensor 传感器siemens relay, contactor 继电器, 接触器skan-o-matic pneumatic parts 气动组件smc cylinder, valve 气缸､阀门sola transformer, power supply 变压器sponsler chain ,roller, gear 链条, 滚轴, 齿轮spraying syste nozzle,floodjet 喷咀sprcher + schuit overload relay; time relay; contactor 负载电器square d contactor, sensor 接触器, 传感器ssac machine parts 机械配件stahlin switch, controller 开关, 控制器sti vision system 视像系统sumtak sensor, detector, counter, encoder 电眼､检测器､计数器sun hydraulics cartridge,relief valve 阀门sunx sensor, safety curtain 传感器super-e motor, gear box 马达､齿轮箱syrelec contractor, counter 接触器, 计数器systems control board, i/o module 控制电路板taiyo cylinder, valve 气缸, 阀门takenaka photo sensor, magnetic sw 传感器tapeswitch sensing element 传感器telemecanique sensor, relay, contactor 传感器tescor tech. i bearing,follower cam 啤令, 凸轮timken bearing, bush 啤令, 杯士, 衬套torrington bearing, bush 啤令, 杯士, 衬套toshiba inverter, motor 变频器total control inspection and measuring sys 检查及量度系统trane filter 过泸器triad auto feeding system 自动进给系统turck proximity sensor, plc, relay 接近开关､电容式开关u.s. motor motor 马达under writers power actuator 电动促动器vacuum vacuum suction pad 真空吸盘veeder-root microcontroller 微型控制器vickers valve,directional 阀门visolux sensor 传感器vorn industries thumwheel switch 姆指旋转开关warner electric dc motor speed controller, motor driver 直流马达､驱动器weed inst. thermocouple 温控器weksler thermometer 温度仪westinghouse sensor, contactor 传感器, 接触器xycom system controller device 监察系统yamatake sensor, switch 传感器, 开关yaskawa sensor, motion control 传感器, 行动控制装置。

Infoprint 250 導入と計画の手引き第 7 章ホスト

SUBNETMASK
255.255.255.128
Type of service...............: TOS
*NORMAL
Maximum transmission unit.....: MTU
*LIND
Autostart.....................:
AUTOSTART
*YES
: xx.xxx.xxx.xxx
: xx.xxx.xxx.xxx
*
(
)
IEEE802.3
60 1500
: xxxx
48 Infoprint 250
31. AS/400
IP
MTU
1
1
IPDS TCP
CRTPSFCFG (V3R2)
WRKAFP2 (V3R1 & V3R6)
RMTLOCNAME RMTSYS
MODEL
0
Advanced function printing............:
AFP
*YES
AFP attachment........................:
AFPATTACH
*APPC
Online at IPL.........................:
ONLINE
FORMFEED
*CONT
Separator drawer......................:
SEPDRAWER
*FILE
Separator program.....................:
SEPPGM
*NONE
Library.............................:

消息队列技术参数要求

消息队列技术参数要求消息队列是一种常用的解决异步通信和解耦系统组件的技术方案。

在使用消息队列时，不同的应用场景和需求会对消息队列的性能、可靠性和可扩展性等方面提出不同的技术参数要求。

本文将从这些方面来探讨消息队列技术参数要求的相关内容。

一、性能要求1. 吞吐量（Throughput）：指消息队列能够处理的消息数量。

通常以每秒处理的消息数（Messages per Second, MPS）来衡量。

在高并发场景下，吞吐量要求较高，需要考虑消息队列的并发处理能力。

2. 延迟（Latency）：指消息从发送到接收的时间间隔。

对于实时性要求较高的场景，延迟要求较低，需要考虑消息队列的传输效率和处理速度。

3. 可靠性（Reliability）：指消息队列在消息传输过程中的数据丢失率。

对于不容忽视数据丢失的场景，可靠性要求较高，需要考虑消息队列的持久化能力和备份机制。

二、可靠性要求1. 持久化（Durability）：指消息队列能够持久化存储消息，以防止数据丢失。

需要考虑消息队列的存储介质和持久化机制。

2. 可靠性传输（Reliable Delivery）：指消息队列能够保证消息的可靠传输，不重复、不丢失、不乱序。

需要考虑消息队列的消息确认机制和重试机制。

3. 容错性（Fault Tolerance）：指消息队列能够在发生故障时自动恢复，并保持数据的一致性。

需要考虑消息队列的故障检测和故障恢复机制。

三、可扩展性要求1. 水平扩展（Horizontal Scalability）：指消息队列能够通过增加节点或分片来扩展处理能力。

需要考虑消息队列的集群部署和负载均衡机制。

2. 高并发（Concurrency）：指消息队列能够处理大量并发的消息。

需要考虑消息队列的多线程处理和并发控制机制。

3. 高可用性（High Availability）：指消息队列能够在发生故障时保持可用状态。

需要考虑消息队列的主备切换和故障转移机制。

bluetoothsocket 详解

bluetoothsocket 详解什么是BluetoothSocket？如何使用它？在本篇文章中，我们将通过一步一步的讨论来详细解释BluetoothSocket的含义、工作原理、使用方法以及一些实用示例。

第一部分：什么是BluetoothSocket？BluetoothSocket是一种用于在蓝牙设备之间进行数据传输的Socket (套接字)。

它允许应用程序在蓝牙设备之间创建一种虚拟的通信通道，从而实现数据的双向传输。

BluetoothSocket有两种类型：分别是基于RFComm (串口)和L2CAP (逻辑链路控制和适应层协议)。

RFComm型BluetoothSocket提供了一种类似于串口通信的数据传输方式，而L2CAP型BluetoothSocket则提供了更灵活的数据传输通道。

第二部分：如何使用BluetoothSocket？第一步：获取蓝牙适配器在使用BluetoothSocket之前，我们需要获取Android设备上的蓝牙适配器。

可以通过BluetoothAdapter类来完成这一操作。

以下是获取BluetoothAdapter的示例代码：BluetoothAdapter bluetoothAdapter =BluetoothAdapter.getDefaultAdapter();第二步：使用BluetoothDevice类建立连接在使用BluetoothSocket之前，我们需要通过BluetoothDevice类来表示目标蓝牙设备，并通过该设备建立连接。

以下是建立连接的示例代码：BluetoothDevice device =bluetoothAdapter.getRemoteDevice(deviceAddress); BluetoothSocket socket =device.createRfcommSocketToServiceRecord(uuid);socket.connect();在上述示例代码中，我们首先使用蓝牙适配器的getRemoteDevice()方法来获取目标设备的BluetoothDevice对象，其中参数deviceAddress是目标设备的物理地址。

Hose Fitting_Socket

套筒 Socket01100国产一层编织软管套筒FERRULE FOR CHINA 1-WIRE HOSEB-0101200国产二层编织软管套筒FERRULE FOR CHINA 2-WIRE HOSEB-0201300国产三层编织软管套筒FERRULE FOR CHINA 3-WIRE HOSEB-0300100SAE100R1A/DIN20022 1ST软管套筒FERRULE FOR SAE100R1A/DIN20022 1ST HOSEB-0400200SAE 100 R2AT/EN 853 2SN 软管套筒FERRULE FOR SAE 100 R2AT/EN 853 2SN HOSEB-0500110SAE100R1AT/EN 853 1SN 软管套筒FERRULE FOR SAE100R1AT/EN 853 1SN HOSEB-0600210SAE100R2AT/EN 853 2SN 软管套筒FERRULE FOR SAE100R2AT/EN 853 2SN HOSEB-0700110T/00210TSAE100R1AT(R2AT)/DIN20022 1SN(2SN)胶管套筒FERRULE FOR SAE100R1AT(R2AT)/DIN20022 1SN(2SN) HOSEB-0800210TSAE100R2AT/DIN20022 2SN 胶管套筒FERRULE FOR SAE100R2AT/DIN20022 2SN HOSEB-0900110-ASAE100R1AT/DIN20022 1SN 软管套筒FERRULE FOR SAE100R1AT/DIN20022 1SN HOSE03310SAE 100 R2AT/EN 853 2SN软管套筒FERRULE FOR SAE 100 R2AT/EN 853 2SN HOSE01400R12/20-24软管套筒FERRULE FOR R12/20-24 HOSE01401浦江牌A型四层钢丝缠绕软管套筒FERRULE FOR 'PUJIANG' 4SA SPIRAL HOSE01402浦江牌B型四层钢丝缠绕软管套筒FERRULE FOR 'PUJIANG' 4SB SPIRAL HOSE004004SP、4SH/12-16、R12/06-16软管套筒FERRULE FOR 4SP、4SH/12-16、R12/06-16 HOSE004014SH 、R12/32软管套筒FERRULE FOR 4SH 、R12/32 HOSE00402SAE 100 R9AT-R12,DIN EN 856-4SP/04-16软管套筒FERRULE FOR SAE 100 R9AT-R12,DIN EN 856-4SP/04-16 HOSESAE 100 R7软管套筒FERRULE FOR SAE100R7 HOSE扣压式软管接头HOSE FITTING00TF0铁氟龙套筒FERRULE FOR TEFLON HOSE扣压式软管接头HOSE FITTING00710铁氟龙套筒FERRULE FOR TEFLON HOSEB-20。

Hose assembly

11) Save the Hose part without any features. 12) Assemble the hose part in to the Hose assembly as default 13) Save the Hose assembly. 14) Open the Main assembly where the Hose assy is assembled. 15) Activate the particular hose part. 16) Create the points from one end of the Hose end to the Other end of the Hose end. Use Offset co-ordinate method for creating the Points. 17) Once the point is created then save the hose part 18) Before the pipe is routed get the OD, ID & Minimum Bend radius of the Pipe based on the Hose code & dash size from Gates/Parker/Aeroquip catalogue. 19) Then use Insert advanced pipe command for creating the Pipe 20) Always minimum bend radius should be met while routing the hose. 21) Connect all the points one by one with the proper bend radius so that the hose meets the minimum bend radius. 22) Save the Hose part , Hose assy & Main assy 23) Check the Hose Length in proe. It should approximately match to the length given in the BOM 24) If there is a drastic difference then inform to customer

PCV-2V压力释放阀，直接操作手动可调说明书

w e e n g i n e e r y o u r p r o g r e s sTable of Contents1 Product Details .....................................................................................................................................................................................2 1.1 Application ............................................................................................................................................................................................. 2 1.2 Recommended Installation .................................................................................................................................................................... 2 2 Function ................................................................................................................................................................................................ 2 2.1 Features ................................................................................................................................................................................................. 23 Technical Data ...................................................................................................................................................................................... 34 Ordering Information ........................................................................................................................................................................... 3 4.1 Type Code ............................................................................................................................................................................................. 3 4.2Versions currently available (3)5 Description of Characterisics in Accordance with Type Code ........................................................................................................ 4 5.1 Characteristic 1: Variant DSU ................................................................................................................................................................ 4 5.2 Characteristic 2: Port / Case: Variant CA - Cartridge ............................................................................................................................. 4 5.3 Characteristic 3: input flow rate .............................................................................................................................................................. 4 5.4 Characteristic 4: Max.permissible pressure ........................................................................................................................................... 4 5.5 Characteristic 5: Activation / Setting ...................................................................................................................................................... 4 5.6 Characteristic 6: Stepped cavity 8.00239 (corresponds to Bucher UVP- 4) ......................................................................................... 4 Das vorgesteuerte Druckbegrenzungsventil ist ein Cartridgebauteil und wird in eine Stufenbohrung entsprechend nebenstehender Zeichnung eingeschraubt. ..................................................................................................................................................................................................... 4 5.7 Characteristic 7: Seal ............................................................................................................................................................................. 4 6 Installation ............................................................................................................................................................................................ 5 6.1 General information ............................................................................................................................................................................... 5 6.2 Connection Recommendations .............................................................................................................................................................. 5 6.3 Installation - installation space ............................................................................................................................................................... 5 7 Notes, Standards and Safety Instructions ......................................................................................................................................... 5 7.1 General Instructions ............................................................................................................................................................................... 5 7.2 Standards ............................................................................................................................................................................................... 58 Zubehör .................................................................................................................................................................................................5w e e n g i n e e r y o u r p r o g r e s s1The pressure valve is designed as cartridge valve. It is a direct operated valve for flow rates up to 10 l / min, which can be adjusted manually. The adjustment can be protected by a cap. The components are designed robust. The valve can be charged up to 500 bar and is delivered at a certain pressure.1.1 ApplicationThe pressure valve is used to protect high volume lift cylinders in truck cranes. It should avoid excessive pressure increase in unmoving cylin-ders due to warming (“sushine valve”).1.2 Recommended Installation2 FunctionThe pressure valve operates as a direct acting seat valve. The pressure can be set using an adjusting screw. The screw is locked after adjustment with a backup sealing nut and can be protected by a cap.2.1 Features▪ Cartridge type▪ Small installation space ▪ Robust construction▪Stepped cavity (corresponds to Bucher UVP-4) ▪Seat valve, leakage freeP – protected port T - tankw e e n g i n e e r y o u r p r o g r e s s3 Technical Data4 4.1 Type CodeXXX – fest vorgegebene Merkmale XXX – vom Kunden wählbare Merkmale4.2 Versions currently availableThe versions listed below are available as standard. Further versions as part of the options given on the type code can be configured upon request.designationtype codepart nr.PRV –DSU –CA -10LPM -500BAR –MAN230BAR –239 -NBR PRV –DSU –CA -10 -500 –MAN230 –239 -N 412.072.451.9 PRV –DSU –CA -10LPM -500BAR –MAN235BAR –239 -NBR PRV –DSU –CA -10 -500 –MAN235 –239 -N 412.072.430.9 PRV –DSU –CA -10LPM -500BAR –MAN290BAR –239 -NBR PRV –DSU –CA -10 -500 –MAN290 –239 -N 412.072.433.9 PRV –DSU –CA -10LPM -500BAR –MAN340BAR –239 -NBR PRV –DSU –CA -10 -500 –MAN340 –239 -N 412.072.431.9 PRV –DSU –CA -10LPM -500BAR –MAN420BAR –239 -NBR PRV –DSU –CA -10 -500 –MAN420 –239 -N 412.072.432.9CriteriaUnit Value Installation position any Weightkg 0,1Surface protectiveZinc coated Maximum input pressure (P) bar 550Adjustable pressurebar 100 - 500 Maximum Tankpressure (T) bar 8 Maximum input flow rate (P) l/min 10Hydraulic fluidMineral oil (HL, HLP) conforming with DIN 51524, other fluids upon re-Hydraulic fluid pressure range °C -25 bis +80 Ambient temperature °C < +50 Viscosity rangemm2/s 2,8 - 500Contamination gradeFiltering conforming with NAS 1638, class 9, with minimum retentionPRVDSUCA10500239N000102030405060700 Product group Pressure relief valves PRV 01 Variant manual adjustable DSU 02 Port / Case Cartridgeventil CA 03 Input flow rate Qmax.10 l/min 1004 Max.permissible pressure Pmax.. 500bar50005 Activation Man ually adjustable 100-500barMAN100 06 Stepped cavity WESSEL-Patrone 8.00239 (stepped cavity) 239 07 Seal NBR, temperatur range -25°C bis +80°CNw e e n g i n e e r y o u r p r o g r e s s5 5.1 Characteristic 1: Variant DSUAdjustable pressure relief valve5.2 Characteristic 2: Port / Case: Variant CA - CartridgeAs variant CA, the valve is delivered as a cartridge valve. The Cavity has to be designed according to characteristic 6 (stepped cavity)5.3 Characteristic 3: input flow rateRecommended maximum flow rate of 10 l/min.5.4 Characteristic 4: Max.permissible pressureMaximum permissible pressure is 500bar (adjustable range100 - 500bar)5.5 Characteristic 5: Activation / SettingThe valve can be adjusted with a set screw. For this purpose, the protective cap must be removed and the counter nut undone.5.6 Characteristic 6: Stepped cavity 8.00239 (corresponds to Bucher UVP- 4)Das vorgesteuerte Druckbegrenzungsventil ist ein Cartridgebauteilund wird in eine Stufenbohrung entsprechend nebenstehender Zeichnung eingeschraubt.5.7 Characteristic 7: SealNBR, temperature range -25°C bis +80°Cw e e n g i n e e r y o u r p r o g r e s s6 Installation6.1 General information▪ Observe all installation and safety information of the construction machine / attachment tools manufacturer. ▪ Only technically permitted changes are to be made on the construction machine. ▪ The user has to ensure that the device is suitable for the respective application. ▪ Application exclusively for the range of application specified by the manufacturer. ▪ Before installation or de-installation, the hydraulic system is to be depressurized. ▪ Settings are to be made by qualified personnel only.▪ Opening is only to be performed with the approval of the manufacturer, otherwise the warranty is invalidated.6.2 Connection RecommendationsNOTE : Enclosed proposed resolution is not always guaranteed. The functionality and the technical details of the construction ma-chine must be checked.5.3 Montage – BauraumObserve connection names.Do not damage seals and flange surface. Its hydraulic system must be ventedEnsure sufficient free space for setting and installation work6.3 Installation - installation space▪ Observe connection names.▪ Do not damage seals and flange surface. ▪ Its hydraulic system must be vented▪ Ensure sufficient free space for setting and installation workCAUTION: Hydraulic hoses must not touch the pressure relief valve, otherwise they are subject to thermal damaging. Tightening torques must be observed. Torque wrench needed.77.1 General Instructions▪The views in drawings are shown in accordance with the European normal projection variant▪ A comma ( , ) is used as a decimal point in drawings ▪All dimensions are given in mm7.2 StandardsThe following standards must be observed when installing and operating the valve:▪ DIN EN ISO 13732-1:2008-12, Temperatures on accessible surfaces8 ZubehörSafety cap: 275.066.000.6。

UVM1.1应用指南及源代码分析_20111211版

6.2. 强大的config .............................................................................................94
6.3. 聚合config变量 .........................................................................................98
写这本书，只是想把自己会的一点东西完全的落于纸上。在努力学习 UVM 的过程中，自己花费了很多时间和精力。我只想把学习的心得记录下来，希望能够给后来的人以启发。如果这本书能够给一个人带来一点点的帮助，那么我的努力就不算是白费。
这本书的前半部分（第 1 到第 9 章）介绍了 UVM 的使用，其用户群较为广泛；
8.2. 搭建一个简单的register model...............................................................129
8.3. 复杂的register model...............................................................................137
函数索引609xvi图目录图11uvm在数字电路设计中的位置3图12uvm对systemverilog的封装4图13简单验证平台5图14uvm验证平台的树形结构6图15实际验证平台7图16packbytes和unpackbytes14图17uvm验证平台中的agent181图21完整的uvm树35图22uvm中常用类的继承关系37图31uvm中的常用phase47图32uvm中所有的phase50图33两个driver位于同一domain57图34两个driver位于不同的domain58图41穿梭的transaction60图51defaultsequence的设置与启动77图52sequencer与driver之间的通信80图53virtualsequence的使用85图61半全局变量93图71monitor与scoreboard的通信104图72使用public成员变量实现通信105图73put操作106图74get操作106xvii图75transport操作107图76component在端口通信中的作用109图77connect关系的建立110图78port与imp的连接111图79portexport与imp的连接115图710使用fifo连接component122图81uvmregfield和uvmreg126图82使用registermodel读取寄存器的流程128图83uvmregfield

管件英文表达

管件资料中英文对照PVC wye斜三通PVC plug堵头Union socket由令Socket coupling套管PVC reducer短型异径管等径直通equal coupling异径直通reducing coupling内牙直通female coupling外牙直通straight tube with outside 90等径弯头90 equal elbow45等径弯头45 equal elbow外牙弯头male elbow内牙弯头female elbow等径三通equal tee异径三通reducing tee内牙三通female tee外牙三通male tee管帽capsch代表压力lr长半径或1倍半大小SIZE数量QTY碳钢弯头Carbon Steel Elbow不锈钢弯头Stainless Steel Elbow高压弯头High-Pressure Elbow同心异径管Concentric Reducers偏心异径管Eccentric Reducers高压异径管High-pressure Reducers不锈钢等径三通Stainless Straight Tee碳钢等径三通Carbon Straight Tee不锈钢等径四通Stainless Straight Cross高压三通High-pressure Tee锻制三通Forged Tee异径接头Template管帽Caps法兰flange长径和短径弯头long and short radius elbows同心和偏心异径接头concentric and eccentric reducers 等径和异径三通straight and reducing outlet tees大小头CONCENTRIC REDUCERTee Equal 相等的三通等径三通Straight Tee异径三通Reducing Tee等径四通Straight Cross90°短半径弯头90°SS Elbow (SR) 90°长半径弯头90°SS Elbow (LR) 高压厚壁弯头Thickness ElbowU型管Return Bend盲法兰Blank Flange弯管Bends翻边stub ends异径接头reducers公称通径nominal diameter外径(mm) outside diameter中心距至端面的距离center to end 理论重量(kg/pcs) approx weight description 类种Standard 标准Design 类型Material 材质双丝头Nipple短节SWAGE NIPPLE内外螺纹活接头Union螺桩studHalf-Coupling单承口管箍Coupling双承口管箍盲板Blind Flangespectacle blind 带双圈的盲板Ecentric 偏心的拆除:dismantle结头（管线的）：tie-in插盲板：slip spade盲板：blank接头：fitting加热器：heater金属缠绕垫片（带外环）:SW with outside ringHR:热轧on site:manifold:管汇铆钉杆径Rivet shank diameters精密机械用六角螺母Hexagon nuts for fine mechanics--Product grade F栓接结构用大六角头螺栓螺纹长度按GB/T 3106 C级8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C-Property classes 8.8 and 10.9栓接结构用大六角头螺栓短螺纹长度C级8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)--Product grade C-Property classes 8.8 and 10.9栓接结构用大六角螺母B级8和10级Hexagon nuts forhigh-strength structural bolting with large width acrossflats--Product grade B-Property classes 8 and 10栓接结构用1型大六角螺母B级10级Hexagon nuts for structural bolting with large width across flatsstyle 1--Product gradeB-Property class 10栓接结构用平垫圈淬火并回火Plain washers for high-strength structural bolting hardened and tempered栓接结构用1型六角螺母热浸镀锌(加大攻丝尺寸) A和B级5、6和8级Hexagon nuts for structural bolting style 1 hot-dip galvanized (oversize tapped)--Product grades A and B-Property classes 56 and 8栓接结构用2型六角螺母热浸镀锌(加大攻丝尺寸)A级9级Hexagon nuts for structural bolting-style 2hot-dipgalvanized(oversize tapped)--Product grade A--Property class 9滑动轴承烧结轴套的尺寸和公差Plain bearings--Sintered bushes--Dimensions and tolerances滑动轴承铜合金轴套Plain bearings--Copper alloy bushes滑动轴承流体动压润滑条件下试验机内和实际应用的滑动轴承疲劳强度Plain bearings--Bearing fatigue--Plain bearings in test rigs and in application under conditions of hydrodynamic lubrication滑动轴承薄壁滑动轴承用金属多层材料Plain bearings--Multilayer materials for thin-walled plain bearings滑动轴承基本符号Plain bearings--Basic symbols滑动轴承应用符号Plain bearings--Applications滑动轴承多层金属滑动轴承结合强度的超声波无损检验Plain bearings--Non-destructive ultrasonic testing of hond for metallic multilayer plain bearings滑动轴承薄壁轴瓦和薄壁轴套的壁厚测量Plainbearings--Measurement of wall thickness of thin-walledhalf-bearings and thin-walled bushes滑动轴承卷制轴套外径的检测Plain bearings--Checking the outside diameter for wrapped bushes钢制压力容器Steel pressure vessels管壳式换热器Tubular heat exchangers管道元件的公称通径Nominal size for pipe components管道元件公称压力Nominal pressure for pipe components压缩空气用橡胶软管(2.5 Mpa 以下) Rubber hose for compressed air (up to 2.5 Mpa)工业通风机用标准化风道进行性能试验Industrialfans--Performance testing using standardized airways船用外螺纹锻钢截止止回阀Marine forged steel male thread stop and check valves铜及铜合金拉制管Drawn tube of copper and copper alloys铜及铜合金毛细管Capillary tube of copper and copper alloys工业蒸汽锅炉参数系列Specifications for industrial steam boiler 液压气动系统及元件公称压力系列Fluid power systems and components--Nominal pressures液压泵及马达公称排量系列Hydraulic fluid power--Pumps and motors -- Geometric displacements液压气动系统及元件缸内径及活塞杆外径Fluid power systems and components--Cylinder bores and piston rod diameters液压气动系统及元件缸活塞行程系列Fluid power systems and components--Cylinders--Basic series of piston strokes液压气动系统及元件活塞杆螺纹型式和尺寸系列Fluid power systems and components--Cylinders--Piston rod thread dimensions and types液压气动系统用硬管外径和软管内径Fluid power systems andcomponents--Connectors and associated components--Outside diameters of tubes and inside diameters of hoses液压传动隔离式蓄能器压力和容积范围、特征量及标识Hydraulicfluid power--Gas-loaded accumulators with separators--Range of pressures and volumescharacteristic quantities and identification可锻铸铁管路连接件 Malleable cast iron pipe fittings灰口铸铁管件 Gray iron castigs for pipe fittings砂型离心铸铁管 Cast-iron pressure pipe centrifugally cast in sand-lined molds连续铸铁管 Cast-iron pressure pipe made by continuous casting process液压气动用O形橡胶密封圈尺寸系列及公差 Fluid systems--Sealingdevices--O-rings--Inside diameters cross-sections tolerances and size identification codeO 形橡胶密封圈外观质量检验标准 Appearance quality acceptance criteria for rubber O-rings液压气动用O形橡胶密封圈沟漕尺寸和设计计算 Fluid powersystems--O-ring--Design criteria for O-ring housing--Basic calculation硬质合金顶锤与压缸 Anvils and high pressure cylinders made from cemented carbideP3型镀锌金属软管 Type p3 galvanized metallic flexible hoseS型钎焊不锈钢金属软管 Type S brazed stainless steel flexible metallic hose钢丝增强液压橡胶软管和软管组合件 Rubber hoses and hose assemblies--Wire reinforced hydraulic type液压系统通用技术条件 Hydraulic fluid power--General rules relating to systems容积式压缩机验收试验 Displacement compressor-Acceptance tests液力传动术语 Hydrodynamic drive terminology气动调节阀 Pneumatic industrial process control valves流体输送用热塑性塑料管材公称外径和公称压力 Thermoplastics pipes for the conveyance of fluids--Nominal outside diameters and nominal pressures化工用硬聚氯乙烯(PVC-U)管材 Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry铝及铝合金管材外形尺寸及允许偏差 Wrought aluminium and aluminium alloy tubes--Dimensions and deviations铝及铝合金热挤压管第一部分: 无缝圆管 Aluminium and aluminium alloy extruded tubes--Part 1: Seamless tubes缠绕式垫片水压密封性能试验方法 Spiral wound gaskets test method of hydraulic pressure sealing characteristics缠绕式垫片蒸汽密封性能试验方法 Spiral wound gaskets test method of steam sealing characteristics缠绕式垫片分类 Specification and symbol of spiral wound gaskets缠绕式垫片管法兰尺寸系列 Dimensional series of spiral wound gaskets for pipe flanges缠绕式垫片技术条件 Specification of spiral wound gaskets压缩机、凿岩机械与气动工具优先压力 Compressors rock drilling machines and pneumatic tools - Preferred pressures容积式压缩机术语总则 Displacement compressors vocabulary--General压缩机分类 Compressors--Classification容积式压缩机噪声声功率级的测定--工程法 Determination of sound power level for noise emitted by displacement compressors--Engineering method夹紧型真空快卸法兰 Vacuum technology clamped type quick release flange拧紧型真空快卸法兰 Vacuum technology screwed type quick release flange钢质无缝气瓶 Seamless steel gas cylinders钢质焊接气瓶 Welded steel gas cylinders高压锅炉用无缝钢管 Seamless steel tubes and pipes for high pressure boiler橡胶、塑料软管及软管组合件液压试验方法 Rubber and plastics hoses and hose assemblies--Hydrostatic testing橡胶、塑料软管低温曲挠试验 Rubber and plastics hoses--Subambient temperature flexibility tests橡胶或塑料软管及纯胶管弯曲试验 Rubber or plastics hoses andtubing--Bending tests胶管耐压扁试验方法 Rubber hose--Test method for crush resistance橡胶、塑料软管及软管组合件真空性能的测定 Rubber and plastics hoses and hose assemblies--Determination of suction resistance橡胶、塑料软管及软管组合件无屈挠液压脉冲试验 Rubber or plastics hoses and hose assemblies--Hydraulic impulse test without flexing扩口式端直通管接头 Flared type tube fittings--Straight thread connector--Assembly扩口式端直通管接头体 Flared type tube fittings--Straight thread connector--Body扩口式锥螺纹直通管接头 Flared type tube fittings--Maleconnector--Assembly扩口式锥螺纹直通管接头体 Flared type tube fittings--Maleconnector--Body扩口式锥螺纹长管接头 Flared typed tube fittings--Straight taread long connector--Assembly扩口式锥螺纹长管接头体 Flared type tube fittings--Straight thread long connector--Body扩口式直通管接头 Flared type tube fittings--Union--Assembly扩口式直通管接头体 Flared type tube fittings--Union--Body扩口式锥螺纹直角管接头 Flared type tube fittings--Male elbow--Assembly扩口式锥螺纹直角管接头体 Flared type tube fittings--Male elbow--Body扩口式直角管接头 Flared type tube fittings--Union elbow--Assembly扩口式直角管接头体 Flared type tube fittings--Union elbow--Body扩口式可调向端直角管接头 Flared type tube fittings--Straight thread elbow-- Assembly扩口式可调向端直角管接头体 Flared type tube fittings--Straight thread elbow--Body扩口式组合直角管接头 Flared type tube fittings--Swivel elbow--Assembly扩口式组合直角管接头体 Flared type tube fittings--Swivel elbow--Body扩口式可调向端三通管接头 Flared type tube fittings--Straight thread branch tee--Assembly扩口式可调向端三通管接头体 Flared type tube fittings--Straight thread branch tee --Body扩口式组合直角三通管接头 Flared type tube fittings--Swivel runtee--Assembly扩口式组合直角三通管接头体 Flared type tube fittings--Swivel runtee--Body扩口式锥螺纹三通管接头 Flared type tube fittings--Male branchtee--Assembly扩口式锥螺纹三通管接头体 Flared type tube fittings--Male branchtee--Body扩口式变径锥螺纹三通管接头 Flared type tube fittings--Male branch tee reducer-- Assembly扩口式变径锥螺纹三通管接头体 Flared type tube fittings--Male branch tee reducer--Body扩口式可调向端直角三通管接头 Flared type tube fittings--Straight thread run tee-- Assembly扩口式可调向端直角三通管接头体 Flared type tube fittings--Straight thread run tee-- Body扩口式组合三通管接头 Flared type tube fittings--Swivel branchtee--Assembly扩口式组合三通管接头体 Flared typed tube fittings--Swivel branchtee--Body扩口式三通管接头 Flared type tube fittings--Union tee--Assembly扩口式三通管接头体 Flared type tube fittings--Union tee--Boby扩口式三通变径管接头 Flared type tube fittings--Union teereducer--Assembly扩口式三通变径管接头体 Flared type tube fittings--Union teereducer--Body扩口式四通管接头 Flared type tube fittings--Union cross--Assembly扩口式四通管接头体 Flared type tube fittings--Union cross--Body扩口式焊接管接头 Flared type tube fittings--Weld maleconnector--Assembly扩口式焊接管接头体 Flared type tube fittings--Weld male connector--Body扩口式隔壁直通管接头 Flared type tube fittings--Bulkheadunion--Assembly扩口式隔壁直通管接头体 Flared type tube fittings--Bulkhead union--Body扩口式隔壁直角管接头 Flared type tube fittings--Bulkhead unionelbow--Assembly扩口式隔壁直角管接头体 Flared type tube fittings--Bulkhead unionelbow--Body扩口式压力表管接头 Flared type tube fittings--Connector for pressure gauge--Assembly扩口式压力表管接头体 Flared type tube fittings--Connector for pressure gauge--Body扩口式管接头管套 Flared type tube fittings--Sleeve扩口式 A 型管接头螺母 Flared type tube fittings--Style A nut扩口式 B 型管接头螺母 Flared type tube fittings--Style B nut扩口式管接头锁紧螺母 Flared type tube fittings--Locknut扩口式管接头空心螺栓 Flared type tube fittings--Inverted flare bolts扩口式管接头密合垫 Flared type tube fittings--Seat insert扩口式管接头锁紧螺母垫圈 Flared type tube fittings--Back-up washer扩口式管接头技术条件 Specification for flared type tube fittings离心泵技术条件(II类) Technical specifications for centrifugalpumps--Class II离心泵技术条件(Ⅲ类) Technical specifications for centrifugalpumps--Class Ⅲ轴向吸入离心泵底座尺寸和安装尺寸 End-suction centrifugalpumps--baseplate and installation dimensions轴向吸入离心泵机械密封和软填料用的空腔尺寸 End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing轴向吸入离心泵 (16 bar) 标记、性能和尺寸 End-suction centrifugalpumps (rating 16 bar)--Designation nominal duty point and dimensions预应力混凝土输水管 (震动挤压工艺) Prestressed vibrohydropressed concrete pipe for water预应力混凝土输水管(管芯缠丝工艺) Core type prestressed concrete pipe for water容积式制冷压缩机性能试验方法 The methods of performance test for positive displacement refrigerant compressors建筑排水用硬聚氯乙烯管材 Unplastisized polyvinyl chloride pipes for drainage in buildings建筑排水用硬聚氯乙烯管件 Unplasticized polyvinyl chloride fittings for drainage in buildings液力偶合器型式和基本参数 Fluid coupling--Types and basic specifications液化石油气钢瓶 Liquefied petroleum gas cylinders液压快换接头尺寸和要求 Hydraulic fluid power--Quick actioncouplings--Dimensions and requirements液压快换接头试验方法 Hydraulic fluid power--Quick actioncouplings--Test methods纤维缠绕压力容器制备和内压试验方法 Method for preparation and internal pressure testing of filament wound pressure vessels真空法兰 Vacuum flanges超高真空法兰结构型式 Ultra-high vacuum flange--Types超高真空法兰尺寸 Ultra-high vacuum flange--Dimensions超高真空法兰用铜密封垫 Ultra-high vacuum flange--Copper seal gaskets长期恒定内压下热塑性塑料管材耐破坏时间的测定方法 Standard test method for time-to-failure of thermoplastic pipe under constant internal pressure柔性机械接口灰口铸铁管 Soft mechanical joint grey cast iron pipe水轮泵名词术语及定义 Terms and definitions of water-turbine pumps水轮泵试验方法 Testing methods of water-turbine pump水轮泵型式与基本参数 Types and basic parameters of water-turbine pump液压缸活塞用带支承环密封沟槽型式、尺寸和公差 Hydraulic fluidpower--Cylinders--Piston seal housings incorporating bearingrings--Dimensions and tolerances液压缸活塞杆用防尘圈沟槽型式、尺寸和公差 Hydraulic fluidpower--Cylinders--Reciprocating--Housings for rod wipers--Dimensions and tolerances热塑性塑料管材纵向回缩率的测定 Thermoplastics pipes-Determination of longitudinal reversion袋式除尘器分类及规格性能表示方法 Classification and specification for bag filters双涡轮液力变矩器主要参数 Basic parameters of double-turbine torque converter消防吸水胶管性能要求和试验方法 Rubber suction hose for fire-fighting purpose performance requirements and test methods离心泵名词术语 Glossary of terms for centrifugal pump容积式压缩机噪声声功率级的测定简易法 Determination of sound power level for noise emitted by displacement compressors--Survey method使用非石油基制动液的道路车辆液压制动系统用制动软管组合件 Brake hose assemblies for hydraulic braking systems of road vehicles used with non-petroleum-base brake fluid使用石油基制动液的道路车辆液压制动系统用制动软管组合件 Brake hose assemblies for hydraulic braking systems of road vehicles used with petroleum-base brake fluid橡胶或塑料软管容积膨胀的测定 Rubber or plastics hoses--Determination of volumetric expansion气瓶颜色标志 Coloured cylinder mark for gases热塑性塑料管材及管件密度的测定第Ⅰ部分: 聚乙烯管材及管件基准密度的测定 Determination of density of thermoplastic pipes and fittings--Part Ⅰ: Determination of reference density of polyethylene pipes and fittings热塑性塑料管材及管件密度的测定第Ⅱ部分: 聚丙烯管材及管件密度的测定Determination of density of thermoplastic pipes and fittings--Part Ⅱ: Determination of density of polypropylene pipes and fittings工业管路的基本识别色和识别符号 Basic identification colours and code indications for industrial pipelines液化石油气瓶阀 Valves for liquefied petroleum gas cylinders橡胶软管术语 Rubber hose--Glossary of terms涡轮分子泵性能测试方法 Methods of measurement of the performance characteristics of tubo-molecular pumps往复活塞压缩机机械振动测量与评价 Measurement and evluation of mechanical vibration of reciprocating piston compressors计量泵 Metering pump机动往复泵试验方法 Method of testing power reciprocating pump往复泵分类和名词术语 Classification and vocabulary for reciprocating pump往复活塞空气压缩机基本参数 Reciprocating piston air compressors--Basic parameters焊接、切割及类似工艺用气瓶减压器 Regulators for gas cylinders used in welding cutting and allied processes气动系统通用技术条件 Pneumatic fluid power--General rules for the application of equipment to transmission and control systems二通插装式液压阀技术条件 Hydraulic fluid power--Two-port slip-in cartridge valves--Cavities--Technical requirements液压元件通用技术条件 Hydraulic fluid power--General rules of technical requirements for hydraulic components液压泵、马达空载排量测定方法 Hydraulic fluid power--Positive displacement pumps andmotors--Determination of derived capacity液压气动用管接头及其附件公称压力系列 Fluid power systems and components--Connectors and associated components--Nominal pressures液压缸及气缸公称压力系列 Fluid power systems andcomponents--Cylinders--Nominal pressures液压软管总成试验方法 Hydraulic fluid power--Hose assemblies--Method of test气动五气口方向控制阀第一部分: 不带电气接头的安装面 Pneumatic fluid power--Five-port directional control valves--Part 1: Mounting interface surfaces without electrical connector气动五气口方向控制阀第二部分带电气接头的安装面 Pneumatic fluid power--Five-port directional control valves--Part 2: Mounting interface surfaces with optional elettrical connector气动五气口方向控制阀第三部分: 功能识别编码体系 Pneumatic fluid power--Five-port directional control valves--Part 3: Code system for communication of valve functions板式液压流量控制阀安装面 Hydraulic fluid power--Compensated flow control valves--Mounting surfaces液压叠加阀安装面 Hydraulic fluid power--Modular stack valves--Mounting surfaces板式联接液压压力控制阀(不包括溢流阀)顺序阀、卸荷阀、节流阀和单向阀安装面 Hydraulic fluid power--Pressure control valves (excluding pressure relief valves ) sequence valves unloading valves throttle valves and check valves--Mounting surfaces板式连接液压溢流阀安装面 Hydraulic fluid power-pressure reliefvalves--Mounting surfaces缸内径8~25mm的单杆气缸安装尺寸 Pneumatic fluid power--Single rod cylinders--Bores from 8 to 25 mm--Mounting dimensions流量控制阀试验方法 Hydraulic fluid power--Valves--Testing method of flow control valves压力控制阀试验方法 Hydraulic fluid power--Valves--Testing method of pressure control valves方向控制阀试验方法 Hydraulic fluid power--Valves--Testing method of directional control valves液压阀压差流量特性试验方法 Hydraulic fluid power--Valves--Method of determining pressure diffrential--Flow characteristics卡箍式柔性管接头技术条件 Specification for flexible coupling of housing卡箍式柔性环型管接头 Flexible coupling of housing for pipe end with rib ring卡箍式柔性肩型管接头 Flexible coupling of housing for pipe end with shoulder液化石油气钢瓶定期检验与评定 Periodic inspection and evaluation of liquefied petroleum gas steel cylinders气瓶专用螺纹 Special threads for gas cylinders气瓶专用螺纹量规 Special thread gauges for gas cylinders气瓶用易熔合金塞 Fusible plug for gas cylinde。

titan model 6 surge-o-matic actuator for trailer b

INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future reference._TITAN MODEL 6 SURG-O-MATICACTUATOR FOR TRAILER BRAKES4744901 leveler Channel2492800 Multi-fit AFrame _ Surge actuators of this type provide a service life of approximately five years with proper installation, usage, and maintenance. However, a well cared-for actuator can often exceed this estimate. To get the most benefit from your TITAN surge actuator, follow the instructions given in-this manual and use common sense in caring for the TITAN MODEL 6 actuator and your entire trailer brake system. WARNING:Do not exceed these ratings.RATED CAPACITY AND USAGE7,500 POUNDS MAXIMUM GROSS LOAD with 2 5/16" coupler, 3" lunette eye or leveler channel. This is the weight of the trailer fully loaded with all cargo and equipment. To find your trailer's Gross Load, use a commercial vehicle scale at a truck weigh station, grain elevator, etc.6000 POUND MAXIMUM GROSS LOAD with multi-fit ball coupler.600 POUND MAXIMUM TONGUE LOAD with any Model 6 actuator. This is the weight applied downward by the fully loaded trailer's coupler on the tow vehicle's hitch. Measure your trailer's Tongue Load with the tongue in a horizontal towing position, using a commercial scale. Upward tongue loads are not permissible.The Model 6 actuator is intended for use with recreational trailers subject to morefrequent use, light utility trailers, and light occasional-use industrial trailers, which aretowed by passenger cars and pickups. The actual in-service rating is limited to that ofthe ball and hitch being used or the trailer manufacturer's G.V.W.R. shown on thecertification label, whichever is lower. TITANA Titan Wheel Company 2345 East Market StreetDes Moines, IA 50317PH: 800-832-8781FAX: 515-265-9201 #24034 8-01 Page 1 of 6MODEL 6 ACTUATOR INSTALLATION INSTRUCTIONSSurge braking requires the installation of an actuator at the tongue of the trailer.The “surge" or “push" of the trailer toward the tow vehicle automatically synchronizes the trailer brakes with the tow vehicle brake. As the trailer pushes against the tow vehicle the actuator telescopes together and applies the force to the master cylinder, supplying hydraulic pressure to the brakes.The Model 6 Actuator is completely assembled and ready to bolt or weld into place.1. Bolt or weld the actuator to the tongue. Light weight tongues require spacer tubes inside forreinforcement when bolting. Attachment strength should equal 1-1/2 times trailer G.V.W.R.2. Install hydraulic brake lines on the trailer as described in the installation manual supplied with the brakes. Be sureto use a flexible hose when connecting the master cylinder to the hydraulic line on the trailer. This is necessary because the master cylinder is spring mounted to provide overload protection.3. Fill the system with DOT-3 heavy duty hydraulic fluid using a pressure type brake bleeder. (This type ofbrake bleeder is available at your local automotive jobber.) Follow manufacturer's directions.Install bleeder hose on first wheel cylinder to be bled; if tandem axle trailer, bleed rear axle first. Have loose end of hose submerged in a glass container of brake fluid to observe bubbling.By loosening the bleeder screw located in the wheel cylinder one turn, the system is open to the atmosphere through the passage drilled in the screw. The bleeding operation is complete when bubbling stops. Be sure to close bleeder screw securely.Repeat bleeding operation at each wheel cylinder. During the bleeding process, replenish the brake fluid so the level does not fall below half full level in the master cylinder reservoir.4. After bleeding is completed, make sure master cylinder is filled to 3/8" below the top of the reservoirand filler cap is securely in place.HITCHING TRAILER1. The towing hitch and ball must have a rating equal to or greater than trailer GVWR.2. Multi-fit Ball coupler will accept 1-7/8", 50MM and 2" trailer balls. Tighten hand wheel to secure ball in socket.Make certain ball latch is in correct position to retain the ball, and that the hand wheel lock is clicking while tightening. You must depress the lock to loosen hand wheel in order to un-hitch trailer. Do not tow trailer if coupler is damaged.3. Connect safety chains using crossed pattern under tongue, or follow trailer manufacturer's directions.4. Connect breakaway S-hook.5. The breakaway system should only operate after both the coupling and safety chains have failed. Thebreakaway is not a parking brake.6. Should the breakaway be accidentally applied while un-hitching, pry the spring clip out of notch tolever.release7. Sway control devices that restrict operation of the actuator cannot be used. The actuator must be freeto telescope in response to braking requirements.#24034 Page 2 of 6MODEL 6 ACTUATOR INSTALLATION INSTRUCTIONS8. Weight distributing (equalizing) hitches have been an important part of trailering for many years. They shiftexcess tongue weight from the end of the tow vehicle by distributing it across all vehicle and trailer axles.Leveling the tow vehicle and the trailer reduces the stress on the suspension components and increases towing stability.All TITAN surge brake actuators are fully compatible with equalizing hitches. When using weight distributing hitches with TITAN actuators, observe the following rules:1) Allow six to eight inches of free chain length,2) The chains must be vertical (straight up and down) under pulling load, and3) Tongue weight beyond the specified actuator rating WILL interfere with brakeperformance.The above statement summarizes TITAN's three "rules of thumb" for equalizer/actuator compatibility. Each rule contributes to optimum trailer braking.RULE #1: Allow six to eight inches of free chain length. This means that the equalizer's chains must be at least six to eight inches long between the spring bars and the hook-up brackets (which attach the chains to the trailer). Surge brake actuators must be free to compress their internal master cylinder. Shorter lengths of chain will limit the distance the actuator can move, and this restricts the unit's braking.RULE #2: The chains must be vertical (straight up and down) under pulling load. During towing, these chains must be aligned straight up and down. This should be confirmed on level ground with the trailer coupled (using the equalizing hitch) to the tow vehicle. After checking that the actuator is in its towing position (not compressed), adjust the position of the hook-up brackets on the trailer until the chains are vertical. If the chains are angled forward or back on the TITAN actuator, they have a tendency to either impede the braking action by limiting the distance the actuator can stroke or prematurely apply the brakes by pulling the trailer forward relative to the tow vehicle_.RULE #3: Tongue weight beyond the specified actuator rating WILL interfere with brake performance. Weight distributing hitches spread tongue weight over the axles of both the tow vehicle and the trailer by applying leverage against the trailer tongue and actuator/coupler. This additional force and torque on the trailer system approximately doubles the load on the actuator, potentially exceeding its load rating.For example, a fully-loaded trailer with a hitched tongue weight of 250 pounds might be equipped with a TITAN Model 6 actuator. A weight distributing hitch would then cause the actuator to receive the equivalent of a 500 pound tongue load. Since 500 pounds is less than the TITAN Model 6 actuator's 600 pound tongue load rating, this set-up would be acceptable. If a similar trailer has a 350 pound tongue weight, and once again an equalizer is hooked up, the actuator would perceive a 700 pound tongue load. That would put the system above the 600 pound tongue load rating of the actuator. Since the excess tongue load on a surge actuator can cause it to stroke less freely (resulting in less effective braking), this would be an inappropriate set-up.Two factors in selecting towing equipment are gross trailer weight (GTW) and tongue load (TL). GTW is the weight of the trailer fully loaded in its actual towing condition. This can be measured by placing the fully loaded trailer on a vehicle scale. TL is the downward force exerted on the trailer hitch ball by the trailer coupler. In most cases it is 10% to 15% of the GTW.With a heavier tongue load, roller kits are available. The roller kit attaches directly to the actuator, and extends back to a roller which rides on the trailer's tongue, allowing a higher tongue weight by shifting the equalizer's added load to the tongue roller instead of the actuator/coupler. Consult your trailer manufacturer, or your equalizer manufacturer for more information on roller kits.9. The actuator is designed for use with Free-Backing trailer brakes. Do not block action in order to backup with other type of brakes. Failure to remove block will also prevent forward braking.#24034 Page 3 of 6MODEL 6 ACTUATOR INSTALLATION INSTRUCTIONS MAINTENANCE1. Before towing check that brake fluid reservoir is at least half full. If not, re-fill to 3/8 inch below the topof the reservoir with DOT 3 brake fluid. Check for leaks and repair as required.2. A film of grease on the coupler will extend coupler and ball life while eliminating squeaking. Wipeclean and renew film each time trailer is used.3. Before towing, examine the actuator for bent parts or wear. Replace parts as necessary. Check todetermine that mounting bolts are tight and welds not cracked.4. There are no adjustments on the actuator.5. Actuator travel (over one inch) shown by front roller path indicates a need to adjust the brakes. Adjust per instructions found inbrake installation manual. In general, back-off adjusters 10 clicks from lockedrotation. Adjust Free-Backing brakes by rotating in forward direction only. Failure to adjust may result in loss of braking. WARNING Saltwater, granular fertilizers and other corrosive materials are destructive to metal. To prolong the life of a braking system used under corrosive conditions, we recommend that the Actuator be flushed after use with a high pressure water hose. Be sure to re-grease bearings and oil all moving parts after the unit has dried. At the end of the season, when unit is to be stored, remove the brake drums and clean inside the brakes. Pack wheel bearings before drum is installed. Failure to properly and adequately grease and maintain the actuator could weaken it and/or cause it to fail and result in serious injury and/or property damage.MODEL 6 ACTUATOR PRODUCT LIST Part # DrumPart # Disc Description Inner Outer 40792002 5/16" coupler 4067700183 24801001834747200 2 5/16" coupler 4067700183 2480100183 40792003172 5/16" coupler 4067700317 2480100317 40676002 5/16" coupler, A frame 4067700183 2493000 40932003" lunette eye 4045600183 248010018347480003" lunette eye 4045600183 2480100183 4045500 3" lunette eye, A frame 4045600183 2493000 2480000multi fit coupler 4391600 2480100183 4747900 multi fit coupler 4391600 2480100183 2492800 multi fit coupler, A frame4391600 2493000 4744900 leveler channel4717600317 4745100317 4748100 leveler channel 4717600317 4745100317 4744901 leveler channel4717600183 4745100183 4748101 leveler channel 4717600183 47451001834022300 multi fit coupler4391600 2493201 4057900 less coupler, A frame1776900 2493000 1777401 master cylinder w/mtg brackets1777405 master cylinder w/mtg brackets #24034 Page 4 of 6*These parts are included in the 40454 Coupler Repair Kit.QUANTITY KEY NO. PART NO. DESCRIPTIONREQUIRED 1 2480100183 Outer Case Assembly1 1A 2493000 Outer Case Assembly1 2 1020900 Bearing2 3 1776300 Front Roller1 4 1776600 Front Roller Pin1 5 0799700 Cotter Pin 1/8 x 3/42 6 1776700 Front Roller Cover #60001 6 4350700183 Front Roller Cover #75001 7 4594100 Breakaway Lever with Pin1 8 1055500 S-Hook - Part of 45941001 9 1780300 Breakaway Spring1 10 1781500 Hex Bolt 5/16 x 1/2 Self Tapping4 11 1861900 Washer1 12 1776200 Cylinder Mounting Plate1 13 1027300 Hex Bolt 3/8 NC x 52 14 4390500 Push Rod Assembly1 *15 2496400 Lock-Ring1 16 1027100 Master Cylinder1 17 1755600 Master Cylinder Cap with Gasket1 18 1209800 Connector, 1/64 Orifice1 19 0797600 Nut - Hex 3/8 NC2 20 0782000 Washer 3/82 21 1027400 Spring2 22 1242600 Damper1 23 0829100 Rear Roller2 24 1777300 Master Pin1 25 0815200 Cotter Pin1 26 1777200 Damper Pin1 27 4391600 Inner Slide Assembly with Bolt & Locknut 1 28 1831600 Washer1 29 1806600183 Cover1 *30 2338100 Latch Bolt1 *31 1809000 Lock Plate1 *32 4335800 Ball Latch1 *33 4336800 Compression Spring1 *34 2338300 Hand Wheel Lock1 *35 2420000 Hand Wheel1 *36 2339000 Bolt - Hex 7/16 NF x 2-5/81 *37 2339100 Locknut - Hex 7/16 NF Thin1 38 4045600 Inner Slide w/3" Lunette Eye1 39 4067700183 Inner Slide w/2-5/16" Ball Coupler1 1502600 Master Cylinder Repair Kit Wagner #136341 4045400 Multi-Fit Coupler Repair Kit (Bolt and Locknut Replace Riveted Pin)1 1848700 2-5/16" Ball Coupler Repair Kit1 480800 Back Up Valve Kit1Page 5of 6。

化工管道端部连接方式及端部类型英文缩写

化⼯管道端部连接⽅式及端部类型英⽂缩写在⽼外的资料中看到⼀些⽐较不常见的管道端部类型，⽽且常常使⽤缩写形式，很令⼈头痛。

但以现有的资料和⼿段⼜⽆法得到全部准确的中⽂表达。

, u& A2 w. B0 o# x }下⾯把找到的端⾯类型的英⽂缩写及其全称贴出，即使不能给出标准的说法，⾄少也能帮助理解。

如果有哪位⾼⼈能给出标准答案，实在是造福我辈。

另外也贴出了部分有中⽂的连接⽅式及端部类型，如有不妥，请指正。

FE[Flanged end]FFTP 9 K+ F6 B5 A9 Z# Z0 y- g& G( t[Flat-face flanged termination type]FFFE[Flat-face flanged end]FFFEWG7 A! S$ {# D& Y' o1 U R& R6 |[Flat-face flanged end with integral gasket]FFLFTP[Flat-face lap-flanged termination type] ( T7 l/ P p* E/ @3 s3 h cFFLFE[Flat-face lap-flanged end] 0 y+ ?+ C3 @" x$ wRFLFTP* s1 b/ {2 b7 P. N[Raised-face lap-flanged termination type] 0 I x! T! ~5 W; v* N5 ?RFTP[Raised-face flanged termination type] 4 l% [$ P; q) g n1 l9 BRFFE. K9 V$ P( u1 ~/ N[Raised-face flanged end] ' O4 F4 y) {% kRFFEWG[Raised-face flanged end with integral gasket] - n1 \! n r* J3 @RJFTP$ g' e6 |- k! m: M r2 P0 C- g, x4 U[RTJ-face flanged termination type] ) E7 c2 `3 p( V# u9 ~) WRJFE[RTJ-face flanged end]TMFTP[Tongue/male-face flanged termination type] 9 @$ M* H, P2 Q. N0 HSFFE4 P* J; p2 L) \0 Q& S: o[Small-female-face flanged end] * W |) Z- F8 i$ U' X9 G: vSMFE" t( L9 J' w, g# X8 t+ K% p[Small-male-face flanged end]STFE[Small-tongue-face flanged end] # m0 |# G* i$ x f0 T xGFFTP[Groove/female-face flanged termination type]SGFE[Small-groove-face flanged end] 0 D3 q7 \1 h G5 M* FLFFE[Large-female-face flanged end] - X( R$ j" i/ w4 l; N# N3 q7 A% c0 bLGFE) w% z K5 l& C5 C; ?' T/ v[Large-groove-face flanged end]LMFE[Large-male-face flanged end] 3 s# h6 o8 m+ u6 [LTFE. ]; s, ?( F# w; a2 @7 l7 r: d[Large-tongue-face flanged end]LTLFE: U4 f( [/ \8 y+ r1 \[Large-tongue-face lap-flanged end]RFLFE7 G2 _' N8 x" N# D[Raised-face lap-flanged end]RJFLFTP ' C7 w0 W& E+ S6 E[RTJ-face lap-flanged termination type]RJLFE! }2 s$ M/ {$ C[RTJ-face lap-flanged end]TMFLFTP[Tongue/male-face lap-flanged termination type]STLFE[Small-tongue-face lap-flanged end]SMLFE( y6 F. N0 P& D8 @[Small-male-face lap-flanged end]LMLFE8 f- @9 L$ O4 n* c1 i* h[Large-male-face lap-flanged end] ! M `) {( H1 E8 K% i GFFLFTP: n( X' Y1 C3 e[Groove/female-face lap-flanged termination type]SGLFE9 i$ o- c j- ^- W" s[Small-groove-face lap-flanged end] ( E) \( M- u3 N9 h, E+ d0 k' j2 @ LGLFE[Large-groove-face lap-flanged end] 7 A! f3 j! N. d4 T+ M& ~. @3 ` SFLFE! ~+ L) c4 H! J5 {; i3 `% \8 {[Small-female-face lap-flanged end] 1 Z/ a' m& D' Y' k8 ILFLFE[Large-female-face lap-flanged end] 2 D9 U1 |& Q6 \7 G0 G FFTBTP[Flat-face thru-bolted termination type]FFTBE* }3 s: b) ]) u9 V+ ? `[Flat-face thru-bolted end]FFTBEWG; w& D/ }7 R1 U[Flat-face thru-bolted end with integral gasket]RFTBTP[Raised-face thru-bolted termination type]RFTBE. c- ]* E( d. M( \[Raised-face thru-bolted end]RFTBEWG[Raised-face thru-bolted end with integral gasket] 6 N) @' a3 h7 O; S RJTBTP; J! ]) G9 P, Q, r[RTJ-face thru-bolted termination type]RJTBE[RTJ-face thru-bolted end] $ F: v+ g/ Z! j$ y% mMRJTBTP[Male RTJ-face thru-bolted termination type]MRJTBEWG[Male RTJ-face thru-bolted end with integral gasket] ! P- w5 \4 }+ X7 Y# J& aFFTBCSTP : j" I1 s( \5 l3 Q# I) U[Flat-face thru-bolted-with-cap-screws termination type] : w' T1 Q" w. U" e5 ], C$ iFFTBCSE[Flat-face thru-bolted-with-cap-screws end]FFTBCSEWG- w2 B5 Z/ J8 G, E5 I0 V+ {[Flat-face thru-bolted-with-cap-screws end with integral gasket]RFTBCSTP[Raised-face thru-bolted-with-cap-screws termination type]RFTBCSE% ?: | Q% Q5 t8 K T[Raised-face thru-bolted-with-cap-screws end] 3 M) v* [5 i' Q& F4 u5 {) U2 ~; URFTBCSEWG3 f. R, ~+ }6 w' J! g3 d; Q[Raised-face thru-bolted-with-cap-screws end with integral gasket] & W8 |+ d: P1 E3 h! l0 C! y* L% [ RJTBCSTP [RTJ-face thru-bolted-with-cap-screws termination type] * ?( _9 R; {5 e( W" I, c3 o0 tRJTBCSE2 K5 p8 l' d: \6 S) L; g[RTJ-face thru-bolted-with-cap-screws end]FFFTBTP[Flat-full-face thru-bolted termination type] $ g: |& D5 v" g! X0 ~/ ^ FFFTBE[Flat-full-face thru-bolted end] 8 E$ J' D6 j- U) c7 t$ o- @ FFFTBEWG[Flat-full-face thru-bolted end with integral gasket] 9 {: N- k: H3 Y: n' h MJTP6 q3 E ~) O( R' t' B[Mechanical joint termination type] - ]& u& ?$ k5 ]MJE[Mechanical joint end]MTP4 X: u8 Q$ o5 D9 q! y, h' i$ M5 E1 R[Male termination type]BE[Beveled end]OLET, o- C% B% ]- R[Olet beveled end]TBE[Tapered and beveled end] * Z6 G1 h) Y5 F8 h" u: ~8 sMFE[Male flared end] . h. n5 ^( d, L, Z9 n( @; _& U3 wMTE[Male threaded end]MGE S5 w( H& Y- p, ~& i$ Q, O. T[Male grooved end] 3 R1 }- D1 m2 H& {, x, }MQCE[Male quick connect end]MFRE$ E: X4 h0 J, V8 m[Male ferrule end] ' [: @2 j2 |/ {* c/ c3 ?) `1 `7 p" qMHE[Male hose end]SPE, z1 o3 G' n7 a5 W# a: S# ^[Spigot end]PE[Plain end]'3"FFPE'[Plain end, 3" field fit]'6"FFPE' 5 H) d% r- A1 Y3 U, d% G5 @* T9 L, r2 ~[Plain end, 6" field fit]STP; m5 ~# Z* v, a) v7 ]0 c) c[Socket termination type] " r7 c/ }$ O9 J8 n: y6 MSE[Socket end] $ D( L' w! D7 J1 NSWTP[Socketwelded termination type]SWE[Socketwelded end]FTTP[Female threaded termination type] " e( o2 a0 J+ A* V4 A4 RFTE[Female threaded end] / B+ Q( x8 [9 k" WFGTP[Female grooved termination type] : a6 E3 Q( m2 f; S' P1 Y4 kFGE; ?: Z% _* ?( W7 F[Female grooved end]FQCTP7 y6 D6 U k, g! Y% g[Female quick connect termination type] / S F, p- O; \+ |! k4 D2 J% T+ o FQCE [Female quick connect end]FFRTP8 U% u8 A! w1 ? \% d) C[Female ferrule termination type]FFRE5 y0 t2 t6 u, A- V[Female ferrule end]FHTP[Female hose termination type] 6 w3 L$ O: G! a FHE3 S0 ~; y2 g! |[Female hose end] 6 d. \/ B1 z4 k1 D" ], Z* @5 M* \2 O BLTP: ~8 ~: A" U! u/ Z! C3 n [Bell end termination type]BLE[Push-on bell end] / ^% b A+ `/ P* X( r1 FMJBE$ f; ]/ u' A1 P[Mechanical joint bell end] 3 q! X. v9 s( n6 N+ c HTP# Q) L) V7 Y0 o: n[Hole end termination type]HCE * F# b Z" a8 N& L* m" J V" N* G- s3 O [Circular hole end] % a* H8 E1 D/ y9 f5 l5 x$ l: } NTP[Null termination type]NE[Null end] ' p! h$ \" B1 zUDTP[User defined termination type]UD $ [/ Y9 L3 {0 h6 e$ @1 l[User defined end]端部连接End Connection法兰端flanged end坡⼝端beveled end (BE)对焊端butt welded end平端plain end (PE)承插焊端socket welding end螺纹端threaded end (TE)承⼝bell end焊接端welding end法兰连接（接头）flanged joint对焊连接（接头）butt welded joint螺纹连接，管螺纹连接threaded joint, pipe threaded joint 锥管螺纹密封焊连接seal-welded taper pipe threaded joint 承插焊连接（接头）socket welded joint承插连接（接头）bell and spigot joint环垫接头ring joint (RJ)万向接头universal joint软钎焊连接（接头）soldered joint搭接接头，松套连接lapped joint法兰式的flanged (FLGD)对焊的butt welded (BW)螺纹的threaded (THD)承插焊的socket welded (SW)⼩端为平的small end plain (SEP)⼤端为平的large end plain (LEP)两端平both ends plain (BEP)⼩端带螺纹small end thread (SET)⼤端带螺纹large end thread (LET)两端带螺纹both end thread (BET)⼀端带螺纹one end thread (OET)⽀管连接branch connection焊接⽀管branch pipe welded directly to the run pipe。

closeidleconnections的参数

在探讨"closeidleconnections的参数"的主题时，首先需要了解closeidleconnections的概念和作用。

closeidleconnections是一个参数，用于设置在空闲状态下关闭连接的时间。

在网络编程中，当客户端与服务器建立连接后，若连接在一段时间内没有进行数据交换，就被认为是处于空闲状态。

closeidleconnections的参数就是用来设置这个空闲状态下的连接关闭时间。

对于这个主题，我们可以从以下几个方面进行深入探讨：1. closeidleconnections的作用和意义2. 不同网络环境对closeidleconnections参数的影响3. 如何设置合适的closeidleconnections参数4. closeidleconnections参数的优化和调优接下来，我们将逐一进行探讨。

1. closeidleconnections的作用和意义closeidleconnections的主要作用是在一定时间内，检测并关闭处于空闲状态的连接，以释放资源和提高网络效率。

在实际网络应用中，由于客户端和服务器的大量连接，在空闲状态下可能会占用大量资源，而closeidleconnections的参数就可以帮助我们有效管理这些连接，提高系统的稳定性和性能。

2. 不同网络环境对closeidleconnections参数的影响在不同的网络环境下，closeidleconnections参数的设置可能会影响网络连接的稳定性和响应速度。

在高负载的网络环境下，设置过小的closeidleconnections参数可能会导致频繁的连接关闭和重新建立，增加了网络的负担和延迟；而在低负载的环境下，设置过大的closeidleconnections参数可能会造成资源浪费和连接未及时释放。

合理设置closeidleconnections参数是非常重要的。

3. 如何设置合适的closeidleconnections参数要设置合适的closeidleconnections参数，需要考虑网络应用的具体情况和需求。

HARVEST 442C-14-INST 10 15 442C 55加仑防腐剂涂布机说明书

Installation Manual442C-14-INST(intentionally blank)Harvest Tec 442C Installation Table of ContentsPAGE Introduction 4 Tools Needed 4 Installation of Applicator 5-11 Installation Tank and Saddle 5-7 Tank Installation Instructions 5 4x5 Baler Install Diagram 6 5x5 Baler Install Diagram 6 5x6 Baler Install Diagram 7 Installation of Pump Mounting Bracket and Drain Fill Line 7-8 4x5 and 5x5 Balers 8 4x6 and 5x6 Balers 8 Installation of Electronic Pump Assembly 8 Installation of Gauge and Hose Manifold 9 Placement of Spray Nozzle Assembly 9 Installation of Plumbing 10 Installation of Controls and Routing the Wire Harnesses 11 Parts Breakdowns 12-14 Model 442C Base Kit 12 Model 457 Control Box & Drain / Fill Line 13 442C Installation Kit 14 Warranty Statement 15IntroductionThank you for purchasing a Harvest Tec Model 442C Hay Preservative Applicator. Please read this manual carefully to ensure correct steps are followed to attach the applicator to the baler. This applicator is designed to apply Harvest Tec buffered acid. The model 442C Kit includes the following parts: tank, frame, pump, gauge, hose, electronic control box, and miscellaneous hardware. If you are unsure about your kit, contact your local dealer for specifications. For your convenience parts break downs are included in the back of this manual.Left and Right sides are determined by facing in the direction of forward travel.Tools NeededSAE wrench set Metric socket set SAE socket setStandard screw driver Hose cutter Drill bit setCrescent wrench Hammer Center punchSide cutter Measuring tapeInstallation of ApplicatorTank and Saddle Installation1. Locate the left saddle leg, 001-4703XL, and mount to left side sheet of baler using two 1/2"x 1-1/2” hexbolts, 1/2" lock washers, and 1/2" flat washers. Do not fully tighten.2. Locate the right saddle leg, 001-4703XR, and mount to right side sheet of baler using two 1/2"x 1-1/2” hexbolts, 1/2" lock washers, and 1/2" flat washers. Do not fully tighten.3. Roll Belt 460 / 560 and RB465 Installation only! Locate the two anchor extension brackets, 001-4703XAX, and attach one extension bracket to the outside of each leg with two 1/2"x 1-1/2” hex bolts, 1/2"lock washers, and 1/2" flat washers.4. Locate the anchor bracket, 001-4703XA, and attach to the side of the extension bracket, 001-4703XAX for4 X 6 balers (or 001-4703XR and 001-4703XL for other balers) using two 1/2"x 1-1/2” hex bolts, 1/2" flatwashers, 1/2" lock washers, and 1/2" hex nuts. Do not fully tighten. Note that 001-4703XA should be positioned so it is angled toward the round pipe that runs across the width of the baler behind the legs.Repeat procedure for the opposite side.5. Locate the u-bolts, 001-4703XAB, and attach the 001-4703XA brackets to the round pipe running acrossthe baler. Tighten the u-bolts evenly. **Due to minimal clearance between the anchor bracket and the side sheet, use a deep socket and long extension on a ratchet to tighten u-bolts.6. With the u-bolts, 001-4703XAB, securely tightened around the round pipe, tighten the bolts connecting theanchor brackets, 001-4703XA, to the saddle legs, 001-4703XL & 001-4703XR.7. Tighten the hardware attaching the saddle legs, 001-4703XL & 001-4703XR, to side sheets of the baler.8. Install the tank assembly (tanks, straps, handrail, and saddle pan) on the legs. Secure the saddle pan,001-4703X, to the saddle legs with 1/2" flat washer, 1/2" lock washer, and 1/2" hex nut from the bottom side in four locations. Tighten hardware.**001-4703XAX (x2) are ONLY used on 4x6 models001-6707HRS(x1)001-4703XR (x1)001-4703XL (x1)001-4402 (x2)001-4703XAX (x2)001-4703XA (x2)001-9203SQ001-4703XAB(x2)4x6 Baler Expanded5x5 Baler ExpandedInstallation of Pump ManifoldMounting Front Pump Plate SupportA. Mount the Pump Mounting Bracket (001-4703XE) to the angled support tube with two M8 x 25mmcarriage bolts and flanged nuts. Use the specified mounting holes as shown on the next page.B. Locate the two holes near the bottom of the angled support on the mounting bracket that thedrain/fill bracket lines up with and attaches to. Remove the existing nuts and install the drain/fill bracket. Reinstall the original nuts or those supplied with this kit to secure the drain/fill bracket to the baler.C. Locate parts bag 1. Thread 3/4” elbow fitting into the end of the tank (003-EL3434). Run 3/4" hosefrom the elbow down the frame to the bottom of the baler. Connect valve assembly to the otherend of hose. Place hose clamps on both ends and secure with zip ties.001-4646C Pump Mounting Plate Holes4x6 and 5x6 Baler Mounting Holes4x5 and 5x5 Baler Mounting Holes001-4703XEMounting Front Pump Plate Support (continued)Installation of Electronic Pump AssemblyInstall the electronic pump assembly by placing the four pump bolts through 001-4703XE and securing on the backside with 1/4” nuts (x4).Installation of Drain / Fill KitLocate parts bag 1. Thread 3/4" elbow fitting (003-EL3434) into end of tank. Run 3/4" hose from the elbow down the frame to the bottom of the baler. Locate the two holes on th e baler’s angled support bracket that line up with the holes in the valve bracket and attach using two 5/16” x1” self -tapping screws and secure with two 5/16” flange nuts. Connect valve assembly to other end of hose. Place hose clamps on both ends. Install supplied safety decals (DCL-8001 & DCL-8005) next to the ball valve assembly.*Secure hose to frame using cable locks.4x5 & 5x5 Balers 4x6 & 5x6 Balers4x5 & 5x5 Balers 4x6 & 5x6 BalersLocation for drain/fill bracketLocation fordrain/fill bracketInstallation of Gauge and Hose ManifoldA. Drill two 3/8” holes and mount pressure gauge to sheet metal above baler gauge. Bend the gaugebracket to adjust the angle.B. Secure with two 5/16” x 1” flange bolts and flange nuts.Placement of Spray Nozzle AssemblyA. Locate nozzle block hanger assemblies with tips pre-installed.B. The assembly with the check valve will be mounted to the left hitch support plate when standing nextto the PTO just in front of and under the large round cross support tube. Use 1/2” x 1 1/4” bolt, flat washer, lock washer, and nut to secure to baler. Repeat for the other assembly on the other side.C. Loosen Philip screw on nozzle block and turn them slightly in toward each other.D. Measure distance between hose barb fittings and cut 1/2” hose to that length. Attach them to thenozzle assemblies and secure them with hose clamps.Installation of PlumbingA. Tank to Pump1. Thread elbow (003-EL3412) into the bottom of the tank.2. Route 1/2” hose from bottom of tank through gap in sheet metal surrounding the baler gauge downto valve on pump intake.3. Secure with hose clamps.B. Pump Gauge1. Attach 1/2” hose to pump discharge and route up to gauge. Secure with hose clamps.C. Gauge to Nozzles1. Attach 1/2” hose to open port of gauge and route hose down to check valve of spray nozzleassembly.2. Attach quick disconnect (003-A1412 and 004-1207H).3. Secure with hose clamps.D. Secure loose hoses to baler with supplied Jiffy clips. Use existing hardware to attach to baler.Filter bowl assemblyGaugeNozzletubes/hosessprayassembliesTankInstallation of Controls and Routing the Wire HarnessesA. Locate the control in an area that allows operation for adjusting or turning the controls while operatingthe baler.B. Route the wire to the starter solenoid on all 12V tractors. Connect the green lead marked + to the hotterminal on the starter. Connect the black lead to a good ground. Do not reverse the leads. Be sure to use a voltmeter to verify that you do have 12 volts running to the box.Note: For tractors with 24v starters, connect the power leads to the tractor’s right hand battery. Do not connect the leads to the starter. Connect the lead marked + to the positive battery terminal and the lead marked- to the negative on the battery. Wiring connections to the battery normally results in corrosion; terminal coating is recommended.C. Attach the wire from the pump to the batteryD. Run wire with molded black plug to back of tractorE. Run wire from pump up drawbar and connect it to the mating plug from the control box. Secure wire tobaler with supplied cable ties.Caution: Do not run a pump or use an electronic control box directly off a battery charger. For stationary use, the applicator can be connected to a new battery and the battery connected to a chargeParts Breakdown for the Tank and SaddleHarvest Tec Model 442C Base KitRef # Description Part # Qty Ref #Description Part #Qty 1 Tank lid005-9022H 1 7 Anchor Bracket 001-4703XA 2 2 55 Gallon tank 005-9203SQ 1 8 Left Leg Rollbelt 001-4703XL 1 3 Tank strap 001-4402 2 9 Right Leg Rollbelt 001-4703XR 1 4 Hand Rail 001-6707HRS 1 10 Anchor Bracket Ext. 001-4703XAX 2 5 Tank Saddle 001-4703X 1 11 Tank Fitting 005-9100 1 6 U-Bolt Rollbelt 001-4703XAB 2Tank Kit Assembly 030-0447C-TK(Includes Ref# 1-11)347512 8691011Parts Breakdown for Control Box and Drain Fill KitModel 457 Control BoxParts Breakdown for Drain Fill (Model 442C)Ref DescriptionPart # Qty Ref Description Part # Qty1 Control box enclosure 006-2015A 1 5 Power lead 006-4580C 12 Control box cover 006-2015B 1 6 Speed dial 006-2022A 13 Control box knob 008-0923 2 7 U-bracket 001-2012E 14 Pump lead 006-4583 1RefDescription Part #QtyRef Description Part #Qty 1 Straight fitting 003-A3434 1 5 Male coupler 002-2205G 1 2 Ball valve 002-2200 1 6 Elbow 003-EL3434 1 3 Valve holder 001-6702H 1 7 Jiffy clip 008-9010 3 4 Female coupler 002-2204A 1 8 Hose clamp 003-9004 2NP 3/4” Hose 002-9002 10ft13456 721 23242526 78Parts Breakdown Model Specific Installation KitsHarvest Tec Model 442C Installation KitRef # Description Part # Qty Ref # DescriptionPart # Qty 1 Valve Mount 001-4703XE 1 17 Female Disconnect 1/4" 004-1207H 1 2 Gauge-4”002-2208Z 1 18 Washer 004-1207W 1 3 Gauge Holder 001-4717 1 19 Tip Strainer004-1203-100 1 4 Fitting 1/4" x 1/2" 003-EL1412 2 20 Diaphragm Check Valve 004-1207V 1 5 Tee 1/4" 003-TT14 1 21 Fitting003-A1412F 1 6 Tip-Pink 004-T8001-PT 2 22 Filter Bowl Assembly 002-4315 1 7 Tip-Brown 004-T80015-PT 2 23 Nipple 003-M1238 1 8 Tip-Yellow 004-T8005-PT 2 24 Pump 12V 007-4120SE 1 9 Tip-Red 004-T8003-PT 2 25 Elbow 003-EL3812 1 10 Plug Allen003-F14A 2 26 Elbow 003-SE12 1 11 Manifold Block 001-4435NSB 2 27 Fitting 003-M1212 1 12 Fitting 1/4" x 1/2" 003-A1412 2 28 Ball Valve 002-2212 1 13 1/2" HB Elbow 003-EL12 1 29 Fitting003-A1212 1 14 EVA Tubing 1/2" 002-9002 26ft NP Spray Block Holder 001-4703XD 2 15 Barb Tee 1/2" 003-T1212 116 Hose Clamps 003-9003 14 Shield Only Assembly030-0442C-SO(Includes Ref # 6-21, NP)129 28 27262223 24252 3 4 58 7 6 10 12 1311 18 17 12 16 15 142019 219WARRANTY AND LIABILITY AGREEMENTHarvest Tec, Inc. will repair or replace components that are found to be defective within 12 months from the date of manufacture. Under no circumstances does this warranty cover any components which in the opinion of Harvest Tec, Inc. have been subjected to negligent use, misuse, alteration, accident, or if repairs have been made with parts other than those manufactured and obtainable from Harvest Tec, Inc.Our obligation under this warranty is limited to repairing or replacing free of charge to the original purchaser any part that in our judgment shows evidence of defective or improper workmanship, provided the part is returned to Harvest Tec, Inc. within 30 days of the failure. Parts must be returned through the selling dealer and distributor, transportation charges prepaid.This warranty shall not be interpreted to render Harvest Tec, Inc. liable for injury or damages of any kind, direct, consequential, or contingent, to persons or property. Furthermore, this warranty does not extend to loss of crop, losses caused by delays or any expense prospective profits or for any other reason. Harvest Tec, Inc. shall not be liable for any recovery greater in amount than the cost or repair of defects in workmanship.There are no warranties, either expressed or implied, of merchantability or fitness for particular purpose intended or fitness for any other reason.This warranty cannot guarantee that existing conditions beyond the control of Harvest Tec, Inc. will not affect our ability to obtain materials or manufacture necessary replacement parts.Harvest Tec, Inc. reserves the right to make design changes, improve design, or change specifications, at any time without any contingent obligation to purchasers of machines and parts previously sold.Note: The warranty registration card supplied with the installation manual must be filled out and returned to the manufacturer within fifteen days of purchase. Without record of receipt of warranty registration at the manufacturer, the warranty is not valid.Revised 02/01/2012HARVEST TEC, INC.P.O. BOX 632821 HARVEY STREETHUDSON, WI 54016PHONE: 715-386-91001-800-635-7468FAX: 715-381-1792 Email:*******************。

福特制造业公司有限责任公司 FJT 系列接触器与 DME Jiffy-Tite - Jiffy-Ma

FS224P FS226P
90° HOSE STEM
1/4 I.D. 5/16 I.D. 3/8 I.D.
FS214 FS215 FS216
FS214P FS216P
STRAIGHT HOSE STEM
3/8 I.D. 1/2 I.D.
FS306 FS308
FS306P FS308P
45° HOSE STEM
.687 .843 1.00 1.00 1.00 1.187 1.250 1.500
.687 .937 .937 1.092 1.125 1.250 1.500 1.562
(F) – Suffix F for female pipe thread
A
C
1.000 1.278 1.373 1.450 1.574
FEMALE THREAD STEEL
1/2 FPT 3/4 FPT
FP554F FP556F
1/2" MALE THREAD BRASS
1/2 MPT FP554 3/4 MPT FP556
★ Available In Steel – Suffix S ■ Available In Brass – Suffix B
1/4 FPT 3/8 FPT
FP352F ■ FP353F ■
MALE THREAD BRASS
1/8 MPT 1/4 MPT 3/8 MPT 1/2 MPT
3/8"
FP351 FP352 ★ FP353 FP354
VALVED PLUG
MALE THREAD BRASS
3/8 MPT FP353V
ห้องสมุดไป่ตู้
21
Foster Manufacturing Company, Inc. • 2324 West Battlefield Road • Springfield, Missouri 65807

阀门缩写术语归纳

1 AARH Arithmetic Average Roughness Height 算术平均粗糙度高度2 AGSS Angular Seating Surface 角支持面3 AMB Ambient 环境4 ANSI American National Standards Institute 美国国家标准协会5 AO Adjustable Opening 可调式开6 API American Petroleum Institute 美国石油协会7 AS Alloy Steel 合金钢8 ASB Asbestos 石棉9 ASBR Asbestos Rubber 石棉橡胶10 ASME American Society Of Mechanical Engineers 美国机械工程师学会11 ASTM American Society Of Testing Materials 美国材料及试验学会12 AV Angle Valve 角阀13 AWWA American Water Works Association 美国自来水厂协会14 BV Ball Valve 球阀15 BB Bolted Bonnet 螺栓连接阀盖16 BBE Bevel Both Ends 两端坡口端17 BC Bolted Cover 螺栓连接阀帽18 BE Bevel End 坡口端19 BLD Blind Flange 盲法兰（法兰盖）20 BLS Bellows Sealing 波纹管密封21 BFW Boiler Feed Water 锅炉给水22 BG Bolted Gland 螺栓连接填料压盖23 BLE Bevel Large End 大端坡口端24 BLK Blank 插板（盲板）25 BS British Standard 英国标准26 BFV Butterfly Valve 蝶阀27 BTV Breathing Valve 呼吸阀28 BW Butt Welded 对焊29 C Carbon / Carbon Content 碳/碳含量30 CA Corrosion Allowance 腐蚀裕量31 CV Check Valve 止回阀32 CI Cast Iron 铸铁33 CL COMM. Class 等级34 CODE Commodity Code 商品代码35 CON Concentric 同心36 CPL Coupling 管箍37 CR Chloroprene Rubber 氯丁橡胶38 CS Carbon Steel 碳钢39 DE S-Bolt Double End Stud Bolt 双头螺柱40 DN Nominal Diameter 公称直径DR Drip Ring 排污环DSAW Double Side Arc Welding 双面埋弧焊DI Ductile Iron 球墨铸铁DV Diaphragm Valve 隔膜阀EB Extended Bonnet 延长阀盖ECC Eccentric 偏心EFW Electrical Fusion Welding 电熔焊EL Elbow 弯头ENR Engineering Standard 工程标准EPDM Ethylene-Propylene-Diene Monomer 三元乙丙橡胶ERW Electrical Resistance Weld 电阻焊FCPL Full Coupling 双承口管箍凹面/大凹面（密封面）FE Flat Face 全平面（密封面）FG Flexible Graphite 柔性石墨FLB Floating Ball 浮动式球阀FLG Flange 法兰FNPT 60°Female NPT Threads60°NPT 内螺纹FP Full Port 全通径FRP Fiberglass-Reinforced Plastics 玻璃纤维增加塑料（玻璃钢）FT Full Threaded Stud Bolt 全螺纹螺柱GSK Gasket 垫片GALV Galvanized 镀锌GBP Stainless Steel Wire & Flexible Graphite Braided Packing 不锈钢丝和柔性石墨纺织填料GBPR Stainless Steel Wire & Flexible Graphite Braided Packing+Flexible Graphite Packing Ring 不锈钢丝和柔性石墨纺织填料＋柔性石墨填料环GLV Globe Valve 截止阀GMG Grooved Metal Gasket 齿形金属垫片GO Gear Operation 齿轮操作GR Grade 级别GRAF Graphite 石墨GV Gate Valve 闸阀HAS-C Hastelloy-C 哈斯合金-CHCPL Half Coupling 单承口管箍HEX Hexagon 六角HHN Heavy Hexagonal Nut 重型六角螺母HF Hardening Face 表面硬化HFW High Frequency Weld 高频焊HPS High Pressure Service 高压介质HW Hand Wheel 手轮ID Inside Diameter 内径IR Inner Ring 内环ISO International Organization For Standardization 国际标准组织IT Impact Test 冲击试验JS Jack Screw 顶丝螺纹LAT Lateral Tee 斜三通LB Pound 磅LF Female Face / Large Female 凹面/大凹面（密封面）LG Large Groove 大槽面（密封面）LGS Longitudinal Seam 纵向焊缝LJ Lap Joint 松套连接LM Male Face / Large Male 凸面/大凸面（密封面）LM/LF Large Male Face/ Large Female Face 大凸面/大凹面（密封面）LN Lined 衬里LP Low Pressure 低压LR Long Radius 长半径LT Large Tongue 大榫面（密封面）LT/LG Large Tongue And Large Groove 大榫面和大槽面（密封面）LTS Low Temperature System 低温系统LTCS Low Temperature Carbon Steel 低温碳钢LUG Lug Type 凸耳型MAX Maximum 最大MEG Metallic Envelope Gasket 金属包覆垫片MFR Manufacturer 制造商MH Metallic Hose 金属软管MI Malleable Iron 可锻铸铁MIN Minimum 最小MNPT 60。

nf90参数

深入理解NF90参数NF90，全称Netfilter 90，是一种网络过滤框架，它在Linux内核中实现了包过滤、NAT和连接跟踪等功能。

NF90的参数设置直接影响其功能和性能。

本文将详细介绍NF90的主要参数。

1. nf_conntrack_max: 这个参数决定了系统可以同时跟踪的最大连接数。

如果超过这个数量，新的连接请求将会被拒绝。

这个值应该根据系统的实际负载来调整。

2. nf_conntrack_tcp_timeout_established: 这个参数定义了已经建立的TCP 连接的超时时间。

当一个连接在这个时间内没有任何活动，它将被视为过期并被删除。

这个值可以根据业务需求进行调整。

3. nf_conntrack_udp_timeout_stream: 这个参数定义了UDP流连接的超时时间。

与TCP不同，UDP是无连接的，但某些应用（如VoIP）可能会使用UDP来模拟流连接。

这个值可以根据这些应用的需求进行调整。

4. nf_conntrack_generic_timeout: 这个参数定义了非TCP/UDP连接的超时时间。

这包括ICMP、IGMP等协议。

这个值也可以根据实际情况进行调整。

5. nf_conntrack_hashsize: 这个参数决定了连接跟踪表的大小。

这个表用于存储所有正在被跟踪的连接信息。

如果这个值太小，可能会导致连接跟踪表溢出，从而影响系统性能。

如果这个值太大，可能会浪费内存。

因此，这个值需要根据系统的实际负载进行调整。

6. nf_conntrack_buckets: 这个参数决定了连接跟踪表的桶数。

每个桶包含多个连接条目。

如果这个值太小，可能会导致查找效率降低。

如果这个值太大，可能会浪费内存。

因此，这个值需要根据系统的实际负载进行调整。

总的来说，NF90的参数设置是一个复杂的过程，需要根据系统的实际负载和业务需求进行精细调整。

希望本文能帮助你更好地理解和配置NF90。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

Winner®
软管接头 Hose Fitting
套筒 Socket
01100
国产一层编织软管套筒
FERRULE FOR CHINA 1-WIRE HOSE
B-01
01200
国产二层编织软管套筒
FERRULE FOR CHINA 2-WIRE HOSE
B-02
01300
国产三层编织软管套筒FERRULE FOR CHINA 3-WIRE HOSE
B-03
00100
SAE100R1A/DIN20022 1ST软管套筒
FERRULE FOR SAE100R1A/DIN20022 1ST HOSE
B-04
00200
SAE 100 R2AT/EN 853 2SN 软管套筒
FERRULE FOR SAE 100 R2AT/EN 853 2SN HOSE
B-05
00110
SAE100R1AT/EN 853 1SN 软管套筒
FERRULE FOR SAE100R1AT/EN 853 1SN HOSE
B-06
00210
SAE100R2AT/EN 853 2SN 软管套筒
FERRULE FOR SAE100R2AT/EN 853 2SN HOSE
B-07
00110T/00210T
SAE100R1AT(R2AT)/DIN20022 1SN(2SN)胶管套筒
FERRULE FOR SAE100R1AT(R2AT)
/DIN20022 1SN(2SN) HOSE
B-08
00210T
SAE100R2AT/DIN20022 2SN 胶管套筒
FERRULE FOR SAE100R2AT/DIN20022 2SN HOSE
B-09
00110-A
SAE100R1AT/DIN20022 1SN 软管套筒
FERRULE FOR SAE100R1AT/DIN20022 1SN HOSE
03310
SAE 100 R2AT/EN 853 2SN软管套筒FERRULE FOR SAE 100 R2AT/EN 853 2SN HOSE
01400
R12/20-24软管套筒FERRULE FOR R12/20-24 HOSE
01401
浦江牌A型四层钢丝缠绕软管套筒FERRULE FOR 'PUJIANG' 4SA SPIRAL HOSE
01402
浦江牌B型四层钢丝缠绕软管套筒FERRULE FOR 'PUJIANG' 4SB SPIRAL HOSE
00400
4SP、4SH/12-16、R12/06-16软管套筒FERRULE FOR 4SP、4SH/12-16、R12/06-16 HOSE
00401
4SH 、R12/32软管套筒
FERRULE FOR 4SH 、R12/32 HOSE
00402
SAE 100 R9AT-R12,DIN EN 856-4SP/04-16软管套筒
FERRULE FOR SAE 100 R9AT-R12,
DIN EN 856-4SP/04-16 HOSE
00403
DIN EN 856-4SP 软管套筒
FERRULE FOR DIN EN 856-4SP HOSE
00405
DIN20023 4SH 胶管套筒FERRULE FOR DIN20023 4SH HOSE
扣压式软管接头HOSE FITTING
SAE 100 R7软管套筒
FERRULE FOR SAE100R7 HOSE
00TF0
铁氟龙套筒FERRULE FOR TEFLON HOSE
00710
铁氟龙套筒FERRULE FOR TEFLON HOSE
00500
SAE 100 R5胶管套筒FERRULE FOR SAE100R5 HOSE。

B_Hose Fitting_Socket

Spears SUPER SOURCEBOOK - 一本塑料管道配件、阀门、管道和水泥类产品的完整目

管道材料专业中英文词汇要点

Synopsys OptoDesigner 2020.09安装指南说明书

真空设备常见英文单词

Infoprint 250 導入と計画の手引き 第 7 章ホスト

消息队列技术参数要求

bluetoothsocket 详解

Hose Fitting_Socket

Hose assembly

PCV-2V压力释放阀，直接操作手动可调说明书

UVM1.1应用指南及源代码分析_20111211版

管件英文表达

titan model 6 surge-o-matic actuator for trailer b

化工管道端部连接方式及端部类型英文缩写

closeidleconnections的参数

HARVEST 442C-14-INST 10 15 442C 55加仑防腐剂涂布机说明书

福特制造业公司有限责任公司 FJT 系列接触器与 DME Jiffy-Tite - Jiffy-Ma

阀门缩写术语归纳

nf90参数

Infoprint 250 導入と計画の手引き第 7 章ホスト