SMCJ6047中文资料
维萨C系列三、四通气动阀产品手册说明书
1E-mail:*************************23-Way & 4-Way Valves, 2 & 3 PositionGENERAL DESCRIPTIONWafer SealingWafer type elastomer sealingprovides leakproof and low frictionoperation throughout entire pressure range.Versa’s C-Series, C5, C7 & C9, valves are multi-purpose three and four-way, 2 and 3 position, solenoid/pilot, pilot and manually operated pneumatic valves consisting of two body types; side ported and manifold mounted. All the C-Series solenoid valves utilize a high performance solenoid pilot design. This design takes advantage of the available media pressure/force to shift valve assuring positive shifting. A low power solenoid controls the pilot signal which provides the positive force for shifting the valve spool. Solenoid/pilot supply can be either Inpilot or Expilot.Double solenoid/pilot 2 position models feature detented offset positions. Double solenoid/pilot 3 position models feature a spring return to the unactuated center position with all ports blocked or exhaust ports open in the center position or cylinder ports open to inlet.A balanced, packed spool is the flow controlling element of each valve. The balanced spool allows the force necessary to shift the valve to remain independent of the pressure of the medium being controlled. The use of elastomer sealing provides bubble tight operation thus enabling positive positioning of 3 position devices and thrift of operation due to no waste of leaking air.Features: ValveEpoxy molded coilsFor moisture resistance & heat dissipation.Air-Assisted Spring Return Air boosts spring for positive valve return.Anodized Aluminum And Stainless Steel Construction All wetted parts resist damage due to corrosion.ValvesSelector chart, Valves .....................................................................................................................Page 5 Solenoid Operated (side ported and manifold mounte d) ................................................................Page 6 Pilot Operated ................................................................................................................................Page 6-7 Palm button ....................................................................................................................................Page 7-8 Rotary .............................................................................................................................................Page 8-9 Lever ..............................................................................................................................................Page 9-10ElectricalGeneral Purpose Solenoids ...........................................................................................................Page 11 Hazardous Location Solenoids.......................................................................................................Page 12-13 Recommended Hazardous Location Solenoid Option Packages ...................................................Page 14ManifoldsManifold Selector (Plug-In) .............................................................................................................Page 15 Manifold Selector (Rack Mounted) .................................................................................................Page 19 Manifold Accessories (Plug-In) .......................................................................................................Page 16-18 Manifold Accessories (Rack Mounted) ...........................................................................................Page 19Repair kits ...........................................................................................................................................Page 4Specifications .....................................................................................................................................Page 4Dimensions .........................................................................................................................................Page 20012022C SeriesViton SealingProvides superior wear and temperature protection.Life CycleRated for 20 million bubble tight cycles in lubricated service (10 million in non-lubricated service).Balanced SpoolForces required to actuate the valve are unaffected by the controlled pressure.Bubble Tight serviceProvides leak tight sealing reducing cost due to wasted air and positive positioning of actuated device when utilizing 3-position valves.33-WAY VALVE & RACK MOUNT MANIFOLDComplete range of AC & DC voltages.Circuit boardwith integral wiring terminal strip provides fast and easy installation.Junction box doors and screws are captive, reducingthe chance of losing parts, therefore simplifying installation.Plug-InIndicator Lights The indicator light option allows electricalset-up, test and troubleshooting capabilities, simplifying installation. Lights are easilyretrofitted in the field .Junction boxes can be retrofitted inthe field .Plug-In plate Connects valve to manifold . Same junction box is utilized for both single and double solenoid valves. All coils are fac-tory pre-wired to junction box.Three Screws Fasten Valve to ManifoldEase of installation and serviceability. No need to make or break any plumbing connections. Simple connect/disconnect of electrical connections when plug-in option is specified.Integral Support Bracket MountingNo extra parts or brackets are required in mounting complete valve/manifold assembly. Four very assessable mounting brackets simplify installation.Features: ManifoldsSolenoid and Manual side ported ValvesRegulatorSandwitch regulator 4 and 5 WAY (Dual pressure 4-Way).Many Solenoid Electrical Connections• DIN connectors with cord grip or conduit connection• Conduit connection • Spade terminals •Wire leadsSolenoid PilotPalm ButtonLeverPilotManifolds/Plug-INRack MountedRotary ButtonMaterials,ValvesValve body, plunger:Anodized AluminumActuating caps: Solenoid (Standard): Solenoid (Low-Watt): PilotManualSpring Cap: Anodized Aluminum Synthetic Resin Anodized Aluminum Anodized Aluminum Synthetic ResinPilot Piston:Synthetic ResinValve Seals:Plunger & Body - FKM (fluorocarbon) Pilot Piston -NBR (nitrile) Solenoid Parts (wetted):304, 430F Stainless Steel and BrassMaterials ManifoldsManifold, End Plates:Die cast Aluminum, powder coat-epoxy paintedBleed Control Plate, Junction Box:Synthetic ResinRegulator Accessory Plate:Black Anodized AluminumStation Blank:Black Oxide SteelT rack-gaskets:NBR (nitrile)Screws: Manifold to Manifold: Valve to Manifold:Black Oxide SteelStainless Steel4Specification5**Separate pressure line connection needed to supply solenoid-pilot, differential pilot return or to control pressure pilot. †Internal auxiliary porting supplies pressurized medium being controlled to pilot, solenoid- pilot or differential pilot return.*Add coil code from page 13**DIN connectors for this coil is P-1005-70-HC† Match coil to valve product number using -027 or -043 designation (see page for part number)†† DIN connectors C5/C7 is P-1520-70-HC, C9 is P-1005-70-HC6* Add solenoid/coil voltages (page 13) & Suffix from Selector Chart (page 5)VALVES7VALVES3-Position 8*Options for Manually Actuated Palm Button Valves Suffix Push Button Knob Color-25B Large diameter 1.81” (46mm) black button.-25BG Large diameter 1.81” (46mm) green button.-25BR Large diameter 1.81” (46mm) red button.9*Options for Manually Actuated Palm Button Valves Suffix Lever Handle Position-218A Lever is rotated 90° counter clockwise from vertical upright position.-218B Lever is rotated 180° counter clockwise from vertical upright position.-218C Lever is rotated 270° counter clockwise from vertical upright position10*-43 Additional panel nut for button or rotary switch valves. Reduces panel thickness from 0.56” (14.2) to 0.44” (11mm).VALVES11*OverridesFour types of overrides are available: Suffix Detail -G, -G5R (standard), -M and -CML. The -G5R (standard) is a push twist to lock, requires no call out. -G is a guarded momentary contact, -M is an unguarded momentary contact and -CML is a raised grip, push twist to lock. Three styles are available depending on the solenoid pilot cap used; one made of, engineered polymer or two made of aluminum. The engineered polymer (shown top): -M, G5R (standard) & -CML. Aluminum (shown middle): -M, -G5R (standard), -CML & -G. Aluminum (shown bottom): -M, -G5R (standard) & -CML. (see chart above for applicable coil and override).-M G 5R CML G-C8Low Watt -027 & -043-228L -243 -C15 & -C50Agency ApprovalsWorld*12HAZARDOUS LOCATION SOLENOID OPERATOR SPECIFICATIONS Solenoid/Pilot actuated C Series valves are available with a variety of different solenoids forhazardous locations. Basic details of actuators are listed below. For additional data consult factory. 13Certification/PowerNorth American - CSAATEX - IECEx - INMETRO Enclosure/WireStandard PowerLow Watt*Standard PowerLow Watt*Steel, Electroless Nickel Plated, 24 Inch Leads-XXL4-XXN4-XNL4-XNN4Stainless Steel, High Performance 430 type, 24 Inch leads -XXE4-XXJ4-XNE4-XNJ4Stainless Steel, 316L type, Junction Box with Terminal Stripn/a-XDBT9**n/a-XDBS914Cross Reference Chart* 1.8 watt solenoid. Also available is 0.85 watt, see cross reference chart above. For 0.50 watt, consult factory.** All the –XDBT type solenoids are “World Solenoids.” Certified for North America, A TEX, IECEx and INMETROElectrical15Notes:* Voltage options - see page 11† The number of stations - 2-12 (½” manifold limited to 8 stations with multi pin connector)†† Plug-In manifold, Multi-Pin connector (Left & right orientation based on viewing manifold cylinder ports) P Plug-In manifold PL Plug-In manifold with lights*PM Multi-Pin connector left hand side PML Multi-Pin connector left hand side with lights* PMR Multi-Pin connector right hand side PMRL Multi-Pin connector right hand side with lights** Lights require same voltage option as solenoid operator being used ISO ports available on both valves and manifolds. Contact factory for part number.Shown:1 C7M-4402-3-PML-D024; Manifold1 CSG-4332-027-P-D024; Valve, Single Solenoid2 CGG-4332-027-P-D024; Valve, Dual Solenoid 1 C7AR-4125MG-P; RegulatorIsolation Shutoff PlateIsolation Shutoff Plate(Suffix -C7M-IP4M) Available on C7 manifolds to isolate individual valves. By turning the slotted spool in the center of the isolation plate 90° the air flow to the valve can beshutoff facilitate maintenance or testing.Spacer PlateSpacer PlateRequired on C5 & C7 stacking manifold for mounting adjacent valves with hazardous service electrical operators or when mounting side by side regulators (see page 12).Hazardous Service solenoids, non Plug-In valves and side byside regulatorsC5C5M-SP4M 0.55”wide C7C7M-SP4M0.40”widePlug-InValvesC5C5M-SP4M-P 0.55”wide C7C7M-SP4M-P 0.40”wideIntermediate Supply Plate(Suffix -SP_) In applications where additional air source is required. To increase the available volume of air. Consult factory for application assistance.Hazardous Service andnon Plug-In Valves C5C5M-4202-SP 0.55”wideC7C7M-4302-SP 1.2”widePlug-In ValvesC5C5M-SP-P 0.55”wide C7C7M-SP-P1.2”wideBleed ControlBleed Control PlatesBleed Control Plates that provide speed con-trol through metering of the exhausts can be added as an option for any valve stations thatrequire this featureC5C5M-BC4M C5M-BC4M-PFor Low Watt Plug-In valvesC7C7M-BC4M C7M-BC4M-PFor Low Watt Plug-In valves C9C9M-BC4M C9M-BC4M-PFor Low Watt Plug-In valvesStation BlankStation BlankA station blank is used to secure an unusedmanifold valve stationC5C5M-SB4M C7C7M-SB4M C9C9M-SB4M16Isolation Disc (Suffix -XS_)Isolation Discs are small gasketed shields that can be placed between manifold stations, to effectively isolate a group of valves that utilize the same pressure.17C7C9Surge Suppression DiodeC5, C7 & C9Multi Pin Connectors, Plug-In Manifold12345678910111213141516171819202122232425A 1214B V dc++-Single Station Manifold C5: C5M-430 (1/4” NPT Ports)C7: C7M-430 (1/4” NPT Ports)C7: C7M-440 (3/8” NPT Ports)C9: C9M-450 (1/2” NPT Ports)Single Station ManifoldsDimensionsSeries A B C C5 3.79”(96.3) 1.25”(31.6)8.94”(227.1)C74.04”(102.6) 1.5”(38.1)9.4”(238.8)C95.33”(135.4)2.14”(54.4)13.67”(347.2)18Regulator Plug-InNotes:1) Regulator Assembly includes gauge, valve mounting screws and track-gasket.2) For side by side mounting of regulators or for regulators on every station, consult factory.3) Regulators for use with INPilot type valves only.4) For 4-way type regulator, must specify 4-way valve. For 5-way type regulator, must specify 5-way valve. Change first 4 in valve part number to 5, for example, CSG-4332-043 changes to CSG-5332-043.5) Minimum manifold inlet pressure based on valve type.Metric dimensions in mm shown in parenthesis.Flow Diagram above shows one single solenoid valve mounted on the Regulator Assembly.Flow Diagram above shows one single solenoid valve mounted on the Regulator Assembly. Supply Main pressure is supplied to the ‘EB’ (5) port and Regulated pressure is supplied tothe ‘EA’ (3) port.DUAL PRESSURE (5-WAY) REGULATOR FLOW DIAGRAMSINGLE PRESSURE (4-WAY) REGULATOR FLOW DIAGRAM4 way5 WAY (Dual pressure 4-Way)Pressure Range psi C5C7C5C7C5AR-4010GC7AR-4010G C5AR-5010G C7AR-5010G 1-10C5AR-4030G C7AR-4030G C5AR-5030G C7AR-5030G 3-30C5AR-4060G C7AR-4060G C5AR-5060G C7AR-5060G 5-60C5AR-4125GC7AR-4125GC5AR-5125GC7AR-5125G 10-125DimensionsSeriesABCC5 2.12” (53.8) 1.25” (31.8) 6.79” (172.5)C72.27” (57.7) 1.7” (42.4)8.66” (220)19Regulator Rack ManifoldNOTES:1) Regulator Assembly includes valve mounting screws and O-rings and can only be mounted on every other station. Alternate regulator assemblies for adjacent stations.2) All valves must be EXPilot type. No auxiliary pilot pressure required (see diagrams).3) Minimum manifold inlet pressure required is based on valve type. See Technical Information page 5.4) C7 only: regulator assembly product numbers listed are for use with Expilot solenoid operated valves only. For pilot or lever operated valves add “P” to the product number shown. FOR EXAMPLE: C7AR-4010GP 5) C7 only: assemble the adapter assembly flush in the pilot port of solenoid valve using a 9/16” wrench.Rack Mount RegulatorInch (mm)Rack Bleed ControlC5: C5M-BC4C7: C7M-BC4Rack Station BlankC5: C5M-SB4C7: C7M-SB4C9: C9M-SB4Shown: 1 Manifold: C7M-4300-31 Regulator: C7AR-4125G1 Four-Way Valve: CSG-4302-228L-D0241 Four-Way Valve: CSG-4322-228L-D024 1 Four-Way Valve:CGG-4322-228L-D0243-WAY C5 & C7 Rack Mounted Manifolds DimensionsMountingHolesHeight Width 2 Station 3 Station 4 Station 5 Station 6 Station 7 Station 8 Station 9 Station 10 StationSeries A B A B A B A B A B A B A B A B A B C D E F C5 2.502.193.443.134.384.065.31 5.0 6.255.937.196.888.137.818.139.0610.09.69 1.482.273.00 1.25C73.132.754.253.885.38 5.06.506.137.637.258.758.389.889.5011.010.6312.1311.75 1.0 2.03.001.50Rack Mounted Manifold Part NumberValve SeriesPart NumberManifold Port SizeC5C5M-3300-(*number of stations)¼” NPT C7C7M-3400-(*number of stations)⅜” NPT20Valves, Sideported*Indicate number of stations, 2 to 10NOTE: manifolds available with ISO threads, consult factory.NOTE: valves available with ISO threads, consult factory.* Dimensions: InchesIN1/4” NPT TYP0.276.7Rack Mounted Manifold Part NumberValve SeriesPart NumberManifold Port SizeC5C5M-4300-(*number of stations)¼” NPT C7C7M-4400-(*number of stations)⅜” NPT21Valves, Sideported*Indicate number of stations, 2 to 10NOTE: manifolds available with ISO threads, consult factory.NOTE: valves available with ISO threads, consult factory.* Dimensions: Inches22Lever ActuatedButton ActuatedRotary Switch Actuated**For Option -25B Large button.NOTE: valves available with ISO threads, consult factory.Panel Hole size is 7/8” Dia.For Button and Rotary Switch valves.Dimensions23EONE EACH SIDE(optional)WARNINGS REGARDING THE DESIGN APPLICATION,INSTALLATION AND SERVICE OF VERSA PRODUCTSThe warnings below must be read and reviewed before designing a system utilizing, installing, servicing, or removing a Versa product. Improper use, installation or servicing of a Versa product could create a hazard to personnel and property.DESIGN APPLICATION WARNINGSVersa products are intended for use where compressed air or industrial hydraulic fluids are present. For use with media other than specified or for non-industrial applications or other applications not within published specifications, consult Versa.Versa products are not inherently dangerous. They are only a component of a larger system. The system in which a Versa product is used must include adequate safeguards to prevent injury or damage in the event of system or product failure, whether this failure be of switches, regulators, cylinders, valves or any other system component. System designers must provide adequate warnings for each system in which a Versa product is utilized. These warnings, including those set forth herein, should be provided by the designer to those who will come in contact with the system.Where questions exist regarding the applicability of a Versa product to a given use, inquiries should be addressed directly to the manufacturer. Confirmation should be obtained directly from the manufacturer regarding any questioned application prior to proceeding.INSTALLATION, OPERATION AND SERVICE WARNINGSDo not install or service any Versa product on a system or machine without first depressurizing the system and turning off any air, fluid, or electricity to the system or machine. All applicable electrical, mechanical, and safety codes, as well as applicable governmental regulations and laws must be complied with when installing or servicing a Versa product.Versa products should only be installed or serviced by qualified, knowledgeable personnel who understand how these specific products are to be installed and operated. The individual must be familiar with the particular specifications, including specifications for temperature, pressure, lubrication, environment and filtration for the Versa product which is being installed or serviced. Specifications may be obtained upon request directly from Versa. If damages should occur to a Versa product, do not Operate the system containing the Versa product. Consult Versa for technical information.LIMITED WARRANTY DISCLAIMER AND LIMITATION OF REMEDIES Versa’s Series products are warranted to be free from defective material and workmanship for a period of ten years from the date of manufacture, provided said products are used in accordance with Versa specifications. Versa’s liability pursuant to that warranty is limited to the replacement of the Versa product proved to be defective provided the allegedly defective product is returned to Versa or its authorized distributor. Versa provides no other warranties, expressed or implied, except as stated above. There are no implied warranties of merchantability or fitness for a particular purpose. Versa’s liability for breach of warranty as herein stated is the only and exclusive remedy and in no event shall Versa be responsible or liable for incidental or consequential damages.Versa Products Company Inc.22 Spring Valley RoadParamus, New Jersey 07652USAPhone: 201-843-2400Fax: 201-843-2931Versa BVPrins Willem Alexanderlaan 14277321 GB Apeldoorn The NetherlandsPhone: 011-31-55-368-1900Fax: 011-31-55-368-1909email:**********************®。
SMC书本资料
标准型(通孔)：CDQ2BP□-□DM-□□
二面宽 K
通孔 沉孔
±0.2
行程 行程
※气缸带金属防尘圈
两端螺孔的场合 缸径 O （mm） 50 63 80 标准型 缸径 (mm) 50 63 80 A B C D E F H M8X1.25 M10X1.5 M12X1.75
两端螺孔 CDQ2AP □ - □ DM- □□
IB 47 58 72
N 52 49 49
W 5 7 5.5
WC 34 38 44
WS 44 39 45
S 65 58 58
Z 90 80 80
ZZ 204 194 194
Hs 45 49 54.5
Ht 28 28 28
注）附件尺寸图参见P1.95
1.101
!: CDQ2 !"=E
P F
2-RcP
行程
无杆侧法兰型：CDA1GP□-□□-□□
杆侧法兰型 缸径 40 50 63 80
B 71 81 101 119
FV 60 70 86 102
FD 9.0 9.0 11.5 13.5
FT 12 12 15 18
FX 80 90 105 130
FY 42 50 59 76
FZ 100 110 130 160
ZZ 190 210 227 270
中间耳轴型：CDA1TP□-□□-□□
Z+1/2 行程
行程
中间耳轴型 缸径 40 50 63 80
行程范围
带 1 个、 带2个
TDe8 15 15 18 25
-0.032 -0.059 -0.032 -0.059 -0.032 -0.059 -0.040 -0.073
美国阀门常用标准编号及名称
美国阀门常用标准编号2008-01-12 17:16美国阀门常用标准编号及名称API 527 金属对金属密封面安全阀的一般要求API 528 安全阀铭牌标准API 598 法兰连接的铁制闸阀API 600 法兰或对时连接的钢制闸阀API 602 带缩口的小口径紧凑型碳钢闸阀ANSI B16.5 钢法兰和法兰管件ANSI B16.10铁、钢制阀门的结构长度ANSI B16.11 承口焊连接和螺纹连接的锻钢管件ANSI B16.20 钢管法兰用环形垫圈和槽ANSI B16.25 对焊连接端部ANSI B16.34 钢制阀门ASTM A488 铸件焊补程序的合格条件ASTM A540 特殊合金钢螺栓MSS SP25 阀门、管件、法兰与管接头的标志MSS SP53 阀门、法兰、管接头与其它管件等铸钢件的质量标准ASTM A232 阀门用铬钒合金弹簧钢丝的质量标准ASTM A276 不锈耐热钢棒型材ASTM A320 低温合金钢螺栓ASTM A350 管道用碳素钢、低合金钢锻件ASTM A351 不锈钢铸件ASTM A352 低温碳钢和合金钢铸件ASTM A479 合金钢棒材和型材MSS SP53 阀门、法兰、管接头与其它管件等铸钢件的射线检查标准MSS SP55 阀门、法兰、管接头等铸钢件外观的目视检查API 6D 管线阀门规范API 526 石油精炼工业用钢制法兰连接的安全阀ASTM A105 碳钢锻件ASTM A126 阀门、法兰和管件用灰铸铁件ASTM A182 锻制和轧制合金钢部件ASTM A193 合金钢螺栓ASTM A194 碳钢和合金钢螺母ASTM A216 碳钢铸件ASTM A217 合金钢铸件。
SMC系列产品使用说明书
5．3对于1－PC和牙嵌式驱动空心轴的电动装置其安装方法是：起吊电动装置使1－PC空心轴孔与阀杆和键配合装入，牙嵌驱式空心轴上的牙嵌与阀门上阀杆螺母的牙嵌对准。用螺栓将电动装置与阀门紧固可靠。
4．1专用电动机：适合阀门的载荷特性和使用工况，型号YLT。
4．2减速机构：用于传递和增大电动机的动力。每个机座产品均有3～5种速比的蜗轮副和若干电机齿轮与蜗杆轴齿轮传动比的齿轮副，因而可获得较大的输出转速范围。
4．3驱动空心轴：它是电动装置的动力输出部件，有2－PC、1－PC、牙嵌式三种型式，结构可见（图10）～（图12）
2．基本技术参数
产品符合JB/T8528-1997《普通型阀门电动装置技术条件》
2．1动力电源：380V、50Hz三相正弦交流电（根据用户要求，某些规格可提供使用单相220V电源的电动机）。
2．2外壳防护等级：SMC－04、03 IP67
SMC－00～5 IP65
2．3使用环境温度：－20℃～40℃；－20℃～60℃（根据用户订货要求）
G·L·SW各列转体上触点的相对位置可任意布置，即同一列上的触点可以全部为“OFF”型式或为“OFF”“ON”两种型式。（最常用的是“OFF”“ON”的布置型式）。
G·L·SW中间的两列转体触点开关可做为阀门某两个中间位置的信号输出，也可将其调整到与两边的转体同步动作。
(图17)为典型控制原理时触点开关的布置型式。
电气接线程序及注意事项：
7．1确认电源电压与电动机使用电压相同。
SMC真空电磁阀介绍
或存在有真空状态的回路中，故必须选用能在真空压力条件下工作的换向阀。真空换向阀要求不泄露，且
不用油雾润滑。故使用座阀式和膜片式阀芯结构比较理想。通径大时可使用外部先导式电磁阀。不给油润
滑的软质密封滑阀，由于其通用性强，也常作为真空用换向阀使用。
SMC 真空电磁阀的选用； 真空选择阀可控制吸盘对工件的吸着或脱离，一个 阀两个功能，可以简化回路设计。 供给阀印设置于正压管路中，可选用一般换向阀。 真空破坏阀，真空切换阀和真空选择阀设置于真空回路或存在有真空状态的回路 中 ，故必须选用能在真空压力条件下工作的换向阀。 真空换向阀要求不泄露，且不用油雾润滑。 故使用座阀式和膜片式阀芯结构比较理想。通径大时可使用外部先导式电磁阀。 不给油润滑的软质密封滑阀，由于其通用性强，也常作为真空用换向阀使用。. 使用真空发生器的回路中的换向阀，有供给阀和真空破坏阀。 使用真空泵回路中的换向阀，有真空切换阀和真空选择阀。 供给阀是供给真空发生器压缩空气的阀。 真空破坏阀是破坏吸盘内的真空状态，将真空变成大气压或正压力，使工件脱离 吸盘的阀。 真空切换阀就是接通或断开真空压力源的阀。
关于 SMC 真空电磁阀的选用
SMC目录列表
方向控制器4、5通先导式电磁阀1》4通电磁阀／盒式集装式SJ：1.SJ2000系列/CAD，2.SJ3000系列/CAD卖点特长：扁平盒式结构。
省空间：阀宽7.5mm(SJ2000)、10mm(SJ3000)。
SJ2000、SJ3000可混装使用。
采用插座式连接方式，易于增减集装位数和阀的更换。
单电控。
具有4位双3通阀规格。
2》真空节流破坏阀SJ3A6系列卖点特长：内置有2个滑阀。
能够用1个阀来控制真空吸着和破坏。
阀宽10mm(与SJ3000系列相同)。
带有能够调节空气流量的节流阀。
真空侧与破坏侧内置多种可交换的过滤器。
可以与4通电磁阀SJ2000/SJ3000混合使用。
3》5通电磁阀SY：1.SY3000系列2.SY5000系列3. SY7000系列4.SY9000 系列卖点特长：3通阀和5通阀能够混合安装使用。
消耗功率：0.1W (带省电回路)有铝制一体型、DIN导轨式、组合集装型等丰富的集装式类型可供选择。
4》新款5通电磁阀新SY：1.SY3000系列2.SY5000系列卖点特长：阀体宽度不变，流量最多增加80％SY3000宽：10mm、SY5000宽：15mm。
寿命2亿次（金属密封）7000（橡胶密封）插入式金属底板（IP40）／插入式插件连接底板（IP67）底面配管，省空间5》5通电磁阀SV：1.SV10002系列2.SV2000系列3.SV3000系列4.SV4000系列卖点特长：便于实现集装式阀的增连以及规格变更。
单电控。
具有4位双3通阀规格。
6》4、5通电磁阀SYJ1.SYJ3000系列2.SYJ5000系列3.SYJ7000系列卖点特长：3通阀和5通阀能够混合安装使用。
消耗功率：0.1W (带省电回路)7》5通电磁阀／盒式集装式SZSZ3000系列卖点特长：具有便于实现阀的交换的盒式结构。
带有开关的阀使得维护时更安全。
采用扁平盒式结构更加节省空间。
8》大型5通电磁阀VP1.VP4□50系列2.VP4□70系列卖点特长：用于大型缸驱动。
SMC中文四版电子样本第三册(辅助元件)3of4
R1 S
带密封剂(仅外螺纹)……标准规格 管子尺寸或连接螺纹尺寸
内连接弯头：KBL
型 号
KBL1-R1S KBL2-R1S KBL2-R2S KBL2-R3S KBL3-R2S KBL3-R3S KBL3-R4S KBL4-R3S KBL4-R4S
托架：KBX
型 号
KBX6 KBX12 KBX14 KBX16 KBX20 KBX22
T 连接螺纹
托架安装用螺纹
4 6 8 10 8 10 12
R 1/8 R 1/4 R 3/8 R 1/4 R 3/8 R 1/2 R 3/8 R 1/2
2
空气供给口： KBE、 KBH 、 KBB 、 KBS 、 KBL
5
托架： KBX
适合管子
KB X 6
适合螺纹大小 品种
KB H 1
品种 接头体大小
4 5
11 38
□ □
□
36 45
11
38
□
43 55
4.87
□
43
ø37
43
DM6
DM12
¿47
多管对接式接头(长方形)
KDM系列
规格
使用流体 最高使用压力 使用真空度 环境及使用流体温度 管子材质
空气 1.0MPa 100kPa 以下 -5~60℃(未冻结) 尼龙、软尼龙、聚氨酯
*盖的型号见下表
管子材质
附件
无记号 C1 C2 ＊盖的型号见下表。
无 单侧带盖 两侧带盖
无记号 尼龙管、软尼龙管、聚氨酯管 适合DMK系列 N NU
尼龙管
适合DM 系列
软尼龙管、聚氨酯管
盖的型号
系列 管子根数 6 DM 12 6 DMK 12
SMC 产品说明书
Other SettingsSummary of Product partsSimple Setting ModeTroubleshootingNote: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.© 2015 SMC Corporation All Rights ReservedAkihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPANPhone: +81 3-5207-8249 Fax: +81 3-5298-5362URL Specifications/Outline with Dimensions (in mm)Refer to the product catalogue or SMC website (URL ) formore information about the product specifications and outline dimensions.PS※※-OMS0008-A InstallationMounting with bracketMount the bracket to the body with mounting screws (Self tapping screws:Nominal size 3 x 8L (2 pcs)), then set the body to the specified position.∗: Tighten the bracket mounting screws to a torque of 0.5±0.05 Nm.Self tapping screws are used, and should not be re-used several times.∗: The panel mount adapter can be rotated through 90 degrees for mounting.•Bracket A (Part No.: ZS-46-A1)•Bracket B (Part No.: ZS-46-A2)Mounting with panel mount adapterMount part (a) to the front of the body and fix it. Then insert the body with (a)into the panel until (a) comes into contact with the panel front surface. Next,WiringWiring connectionsConnections should be made with the power supply turned off.Use a separate route for the product wiring and any power or high voltagewiring. Otherwise, malfunction may result due to noise.If a commercially available switching power supply is used, be sure toground the frame ground (FG) terminal. If the switching power supply isconnected for use, switching noise will be superimposed and it will not beable to meet the product specifications. In that case, insert a noise filtersuch as a line noise filter/ferrite between the switching power supplies orchange the switching power supply to the series power supply.How to use connectorstraight out.OUT1NCNCDC(-)PipingTightening the connection threadFor connecting to the body (piping specification: -M5)After hand tightening, apply a spanner of the correctsize to the spanner flats of the piping body, and tightenwith a 1/6 to 1/4 rotation.As a reference, the tightening torque is 1 to 1.5 Nm.(When replacing the piping adapter ZS-39-N∗, tighten itusing the same method.)Piping specification: -01, -N01After hand tightening, hold the hexagonal spanner flatsof the pressure port with a spanner, and tighten with 2 to3 rotations.As a reference, the tightening torque is 3 to 5 Nm.When tightening, do not hold the Z/ISE20 body with aspanner.Default settingsWhen the pressure exceedsthe set value, the switch will beturned on. When the pressurefalls below the set value by theamount of hysteresis or more,the switch will be turned off.The default setting is to turn onthe pressure switch when thepressure reaches the centre of the atmospheric pressure and upper limit of therated pressure range. If this condition, shown to the right, is acceptable, then keepthese settings.Error indication functionThis function is to display error location and content when a problem or error has occurred.than above are displayed, please contact SMC.Refer to the SMC website (URL ) for more informationabout troubleshooting.button between1 and 3 sec.button between3 and 5 sec.∗:The outputs will continue to operate during setting.∗:If a button operation is not performed for 3 seconds during the setting, the display will flash.(This is to prevent the setting from remaining incomplete if, for instance, an operator were to leaveduring setting.)∗:3 step setting mode, simple setting mode and function selection mode settings are reflected eachother.[3 step setting mode (hysteresis mode)]orsetting can be changed in the same way.button once when the item toThe set value on the sub display (right) willstart flashing.orbutton and can be reduced withbutton.buttons are pressed and held simultaneously for 1second or longer, the set value is displayed as [- - -], and the set value will bethe same as the current pressure value automatically (snap shot function).button.button to complete the setting.The Pressure switch turns on within a set pressure range (from P1L to P1H) duringwindow comparator mode.Set P1L, the lower limit of the switch operation, and P1H, the upper limit of theswitch operation and WH1 (hysteresis) following the instructions given above.(When reversed output is selected, the sub display (left) shows [n1L] and [n1H].)∗:Setting of the normal/reverse output switching and hysteresis/window comparator modeswitching are performed with the function selection mode [F 1] OUT1 setting.valuePeak/bottom value indicationbutton inmeasurement mode.Snap shot functionbuttons for 1second or longer simultaneously. Then, the set value of the sub display (right)shows [- - -], and the values corresponding to the current pressure values areautomatically displayed.Zero-clear functionbuttons are pressed for 1 secondor longer simultaneously, the main display shows [- - -], and the reset to zero.The display returns to measurement mode automatically.Key-lock functionTo set each of these functions, refer to the SMC website(URL ) for more detailed information, or contact SMC.button between 1 and 3 seconds inmeasurement mode. [SEt] is displayed on the main display. Whenthe button is released while in the [SEt] display, the current pressurevalue is displayed on the main display, [P_1] or [n_1] is displayed onthe sub display (left), and the set value is displayed on the subdisplay (right) (Flashing).or button to set the(The snap shot function can be used.)or button to set the(The snap shot function can be used.)or button, the delay time of the switch output can be selected.button for 2 seconds or longer to complete the OUT1 setting.∗:If the button is pressed for less than 2 seconds, the setting will be returned to P_1.In the window comparator mode, set P1L, the lower limit of the switch operation,and P1H, the upper limit of the switch operation, WH1 (hysteresis) and dt1 (delaytime) following the instructions given above.(When reversed output is selected, the sub display (left) shows [n1L] and [n1H].)Function selection modebutton between 3 and 5seconds, to display [F 0]. Select todisplay the function to be changed[F]. Press and hold the buttonfor 2 seconds or longer in functionselection mode to return tomeasurement mode.∗:Some products do not have all the functions. If no function is available or selected due toconfiguration of other functions, [- - -] is displayed on the sub display (right).Names of individual partsRefer to the product catalogue or SMC website (URL )for more information about panel cut-out and mounting hole dimensions.Pressure Setting3 Step Setting Mode(URL ) for more detailed information, or contact SMC.MaintenanceHow to reset the product after a power cut or forcible de-energizingThe setting of the product will be retained as it was before a power cut orde-energizing. The output condition is also basically recovered to that before apower cut or de-energizing, but may change depending on the operatingenvironment. Therefore, check the safety of the whole installation before operatingthe product. If the installation is using accurate control, wait until the product haswarmed up (approximately 10 to 15 minutes).Safety InstructionsBefore UseDigital Pressure SwitchZSE20(F)/ISE20Thank you for purchasing an SMC ZSE20(F)/ISE20 Series Digital PressureSwitch.Please read this manual carefully before operating the product and make sure youunderstand its capabilities and limitations. Please keep this manual handy forfuture reference.Safety InstructionsThese safety instructions are intended to prevent hazardous situations and/orequipment damage.These instructions indicate the level of potential hazard with the labels of"Caution", "Warning" or "Danger". They are all important notes for safety and mustbe followed in addition to International standards (ISO/IEC) and other safetyregulations.OperatorSwitch ONAt normal output Switch OFFSet valueP_1HysteresisH_1TimePressureOther parameter settingsDefault settingThe default setting is as follows.If no problem is caused by thissetting, keep these settings.。
SMC样本
导线引出方式
DC24V、 12V、 6V、 5V、 3V／AC100V、 110V、 200V、 220V 直接出线式 L形插座式 M形插座式
G: 导线 长300mm L: 带导线 (长300mm) M: 带导线 MN: 不带导线 (长300mm)
++-
DC24V、 12V AC100V、 110V、 200V、 220V
型号／SY7000系列
阀的 型号 流量特性 质量g 1→4/2(P→A/B) 4/2→5/3(A/B→EA/EB) L形、 W形 直接 M形 DIN形 M8 5、 3 4、 2 C[dm3/ 机能 1、 C[dm3/ 出线式 插座式 插座式 接头 (P、EA、EB) (A、 B) b Cv b Cv (s ・ bar)] (s ・ bar)] 单电控 101 104 125 129 2位 4.1 0.23 0.93 3.3 0.33 0.81 双电控 120 125 167 175 接管口径 中封式 3位 中泄式 中压式 63 67 83 101 SY7□20 -□-C8 单电控 1(P) 2位 双电控 通口 C8 ¿8 5、 3 3位 中泄式 (EA、 EB) 快换 通口 接头 中压式 1 8 2位 SY7□20 -□-C10 单电控 双电控 中封式 3位 中泄式 中压式 C10 ¿10 快换 接头 中封式
导线引出方式(D式的场合) 无记号 无指示灯及过电压保护回路 S 带过电压保护回路(无极性式) Z 带指示灯及过电压保护回路(无极性式)
※ 没有DOZ式。 ※ AC 的场合， 用整流器防 止过电压的发生， 故无 S 式。
M8接头
WO: 接头 无电缆
※ LN、 MN式带2个导线插头。 ※ SY3000系列的DIN形插座式参见后附10。 ※ 符合DIN43650C 标准的 DIN 形插座式 [ Y 式 ] 也有。 详见 P.212。 ※ M8接头的接头电缆参见后附12。
真空蝶阀
首页>>产品中心>>真空蝶阀类>>GI系列高真空蝶阀GI系列高真空蝶阀是用来接通或切断真空管路中的气流。
适用的工作介质为空气和非腐蚀性气体。
主要技术性能适用范围(Pa)105～1.3x10-5阀门漏率(Pa.L/S)≤1.3x10-6介质温度（℃）-25～+80(密封材料为丁腈橡胶) -30～+150(密封材料为氟橡胶)法兰标准JB919安装位置任意连接及外形尺寸型号通径(DN)ΦDΦB H A L n-ΦC GI-252570557222824-Φ7GI-3232786476GI-4040827080GI-50501109098954-Φ9 GI-636313011012226132GI-808014512513030GI-1001001701451424-Φ12GI-12512519517015535170GI-150150220195176GI-200200275250232402348-Φ12 GI-25025033030027545273GI-300300380350324553618-Φ14GI-400400500465409604208-Φ18注：GI-63法兰连接GB/T6070标准.订货须知：一、①真空阀产品名称与型号②真空阀口径③真空阀是否带附件二、若已经由设计单位选定公司的ZRSF（H）型电子式三通电动调节阀型号，请按ZRSF（H）型电子式三通电动调节阀型号相关产品：电磁真空带充气阀DDC-JQ系列电磁真空带充气阀DDC-JQ-B系列低真空电磁压差充气阀DYC-JQ系列电磁真空压差式充气阀DYC-JQ、GYC-JQ系列电磁高真空充气阀GQC系列电磁高真空带充气阀GDC-Q5型电磁高真空挡板阀GDC-J系列气动高真空挡板阀GDQ系列高真空挡板阀GD-J系列电、气动高真空挡板阀GDQ-J(b)系列(带波纹管密封)气动高真空挡板阀GDQ-J(b)-A系列(带波纹管密封)手动高真空挡板阀GD-J(b)系列(带波纹管密封)常闭型气动高真空挡板阀GDQ-J-A系列三通式气动高真空挡板阀GDQ-JS系列电磁高真空挡板阀GDC-5型高真空蝶阀GI系列高真空蝶阀GI-A系列高真空蝶阀GI-C系列气动高真空蝶阀GIQ系列气动高真空蝶阀GIQ-A系列气动高真空蝶阀GIQ-B系列气动高真空蝶阀GIQ-AB系列电动高真空蝶阀GID系列电动高真空蝶阀GID-A系列真空(压力)球阀GU系列气动真空(压力)球阀GUQ系列电动真空(压力)球阀GUD系列高真空微调阀GW-J-T系列高真空隔膜阀GM系列活塞角座阀J611F系列真空流量调节阀ZT-B系列超高真空插板阀CC-A系列气动超高真空插板阀CCQ-A系列电磁阀系列价格供用户或设计院工程项目做预算品名规格单价（元）铸钢不锈钢全不锈钢电磁阀15 720ZBSF0~1.6MPA≤200℃20 787.525 85532 1012.540 112550 153065 247580 2925100 3825水用电磁阀（丝口）ZCS0.05~0.8MPA≤60℃15黄铜157.5 20 180 25 225 32 405 40 540 50 675水用电磁阀（法兰）ZCS0.05~0.8MPA≤60℃25 450铸铁32 49540 58550 67565 85580 1012.5100 1237.5125 1912.5150 2475200 4275250 7650300 10575蒸汽|水|油电磁阀ZQDF0-1.6MPA≤200℃丝口15 450 20 495 25 562.5 32 787.5 40 900 50 1125蒸汽|水|油电磁阀ZQDF0-1.6MPA≤200℃法20 787.5 25 675 855 32 855 1012.5 40 945 1125 50 1170 1462.5高温中压电磁阀ZCG0.4~1.6MPA≤350℃15 0 1080 20 0 108025 945 1125 32 1170 1305 40 1305 1530 50 1530 1800品名 规格 单价（元） 铸钢不锈钢中温电磁阀ZCZP （丝口）0.05~1.6MPA ≤200℃ 15 450 20 49525 562.5 32 787.540 900 50 1125 中温电磁阀ZCZP （法兰）0.05~1.6MPA ≤200℃25 720 855 32 900 1012.5 40 1012.5 1125 50 1237.5 1462.5 65 1687.5 2475 80 1912.5 2925100 2475 3825125 3825 6750 150 4725 10125 200 7875 19125 250 10800 27000 300 13050 350 19125 高压电磁阀GZYS6.4MAP ≤200℃ 15 3150 20 337525 382532 405040 4950 50 6750 快速启闭阀J041H0.1-10MPA ≤200℃10 382515 405020 450025 4950 32 6300 40 7200 50 7875电磁式紧急切断阀ZCRB0~0.1MPA≤80℃25 1350 32 1462.5 40 1575 50 1687.5 65 1912.5 80 2025 100 2700 125 3825 150 4500 200 6300 250 10575 300 13050 350 19125品名规格单价（元）铸钢不锈钢电磁式煤气安全切断阀DMF-0.1≤80℃100 5625 125 5850 150 6075 200 6300 250 6750 300 7200 350 8550 400 10125 450 11250 500 13950 600 16875 700 19800 800 22500 900 27000 1000 38250(丝口）ZCM0~0.04MAP≤80℃20 517.5 25 585 32 720 40 1080 50 1237.5煤气、天然气、液化气电磁阀(法兰）ZCM0~0.04MAP≤80℃25 675 32 787.5 40 900 50 1237.5 65 2025 80 2250 100 2925 125 4050 150 4950 200 6300 250 10800 300 13050 350 19125多功能电磁阀ZDF0.01~1.6MPA≤180℃15 2250 20 2250 25 2700 32 3375 40 4050 50 5400 65 6300 80 7200 100 8550品名规格单价（元）铸钢不锈钢高温高压电磁阀ZCZG0.1~2.5MPA≤250℃15 2250 20 2250 25 2362.5 32 2475 40 2925 50 3150 65 4275 80 5625100 6750高温高压电磁阀ZCZH0.1~4.0MPA≤400℃15 2250 20 2250 25 2475 32 2700 40 3037.5 50 3262.5 65 4500 80 5850 100 7200气控电磁阀ZCQ法兰0~0.8MPA≤80℃25 540 32 630 40 742.5 50 1012.5 65 1372.5 80 1980 100 2250 125 2812.5 150 3375排泥阀专用电磁阀24DHS 10 630 15 675 20 742.5 25 810自保持式电磁阀ZCSTH 法兰0.05~0.8MPA≤60℃25 1350 32 1687.5 40 1912.5 50 2025 65 2362.5 80 2700 100 3150电磁脉冲阀20 247.5铝材质25 27040 49550 63065 72080 855品名规格单价（元）丝扣法兰燃气安全电磁阀ZCRP-DSK常开型，材质铸钢15 1125 1170 20 1170 1215 25 1215 1260 32 1912.5 2025 40 2610 2790 50 2700 2925 5 4500 80 4950 100 5850 125 13500 150 15750 200 18900 250 29250 300 3600 400 74925燃气安全电磁阀ZCRP-DSB常闭型，材质铸钢15 1665 1710 20 1710 1755 25 1755 1800 32 2587.5 2700 40 3420 3600 50 3510 37350 5 6525 80 7267.5 100 8550 125 18900 150 20520 200 23512.5 250 34425 300 42750 400 123750家用电磁阀ZCRP(A)-DSB 常闭型15 450 20 472.5 25 495 32 540 40 585 50 630家用型燃气泄漏报警器240元气体探测器、气体报警控制器1900元/路品名规格单价（元）丝扣法兰Y型气动角座阀塑料头304≤180℃15 360 540 20 405 630 25 495 765 32 630 877.5 40 787.5 1035 50 1012.5 1260 65 1395 1800 80 2025 2475铜不锈钢2W系列丝口电磁阀15 123.75 180 20 135 202.5 25 225 270 32 315 483 40 450 540 50 585 765名称型号通径价格不锈钢全不锈钢电磁阀ZBSF0-1.6MPA≤200℃DN15 480DN20 525DN25 570DN32 675DN40 750DN50 1020DN65 1650DN80 1950DN100 2550名称型号通径价格铸钢不锈钢蒸汽，水，油用电磁阀ZQDF丝口1-1.6MPA≤200℃DN15 300DN20 330DN25 375DN32 525DN40 600DN50 750ZQDF法兰0-1.6MPA≤200℃DN20 525DN25 450 570DN32 570 675DN40 630 750DN50 780 975名称型号通径价格铸钢黄铜水用电磁阀ZCS丝口0.05-0.8MPA≤60℃DN15 105DN20 120DN25 150DN32 270DN40 360DN50 450ZCS法兰0.05-0.8MPA≤60℃DN25 300DN32 330DN40 390DN50 450DN65 570DN80 675DN100 825DN125 1275DN150 1650DN200 2850DN250 5100DN300 7050名称型号通径价格铸钢不锈钢高温中压电磁阀ZCG0.4-1.6MPA≤350℃DN15 720DN20 720DN25 630 750 DN32 780 870 DN40 870 1020 DN50 1020 1200名称型号通径价格铸钢不锈钢中温电磁阀ZCZO丝口0.05-1.6MPA≤200℃DN15 300DN20 330DN25 375DN32 525DN40 600DN50 750ZCZO法兰0.05-1.6MPA≤200℃DN25 480 570DN32 600 675DN40 675 750DN50 825 975DN65 1125 1650DN80 1275 1950DN100 1650 2550DN125 2550 4500DN150 **** ****DN200 5250 12750DN250 7200 18000DN300 8700DN350 12750名称型号通径价格不锈钢高压电磁阀GZYS6.4MPA≤200℃DN15 2100DN20 2250DN25 2550DN32 2700DN40 3300DN50 4500名称型号通径价格不锈钢快速启闭阀J041H0.1-10MPA≤200℃DN10 2550DN15 2700DN20 3000DN25 3300DN32 4200DN40 4800DN50 5250名称型号通径价格电磁式煤气安全切断阀DMF-0.1≤80℃（温度≤250℃需要特殊订货）DN100 3750DN125 3900DN150 4050DN200 4200DN250 4500DN300 4800DN350 5700DN400 6750DN450 7500DN500 9300DN600 11250DN700 13200DN800 15000DN900 18000DN1000 25500电磁式紧急切断阀ZCRB0-0.1mpa≤80℃（压力0-1.6MPA需要特殊订货）DN25 900DN32 975DN40 1050DN50 1125DN65 1275DN80 1350DN100 1800DN125 2550DN150 3000DN200 4200DN250 7050DN300 8700DN350 12750名称型号通径价格铸钢煤气，天然气，液化气电磁阀ZCM丝口0-0.04mpa≤80℃DN20 345DN25 390DN32 480DN40 720DN50 825ZCM法兰0-0.04mpa≤80℃DN25 450DN32 525DN40 600DN50 825DN65 1350DN80 1500DN100 1950DN125 2700DN150 3300DN200 4200DN250 7200DN300 8700DN350 12750名称型号通径价格铸钢高温高压电磁阀ZCZG0.1-2.5mpa≤250℃DN15 1500DN20 1500DN25 1575DN32 1650DN40 1950DN50 2100DN65 2850DN80 3750DN100 4500ZCZH0.1-4.0mpa≤400℃DN15 1500DN20 1500DN25 1650DN32 1800DN40 2025 DN50 2175 DN65 3000 DN80 3900 DN100 4800名称型号通径价格铝电磁脉冲阀DMF-Z DN20 165 DN25 180 DN40 330 DN50 420 DN62 480 DN78 570名称型号通径价格排泥阀专用电磁阀24DHS0.15-1.0mpa≤60℃(二位四通）DN10 420DN15 450DN20 495DN25 540自保持式电磁阀ZCSTH法兰0.05-0.8mpa≤60℃DN25 900DN32 1125DN40 1275DN50 1350DN65 1575DN80 1800DN100 2100名称型号通径价格铸钢气控电磁阀ZCQ法兰0-0.8mpa≤80℃DN25 360DN32 420DN40 495DN50 675DN65 915DN80 1320DN100 1500DN125 1875DN150 2250 名称型号通径价格多功能电磁阀ZDF0.01-1.6mpa≤180℃DN15 1500DN20 1500DN25 1800DN32 2250DN40 2700DN50 3600DN65 4200DN80 4800DN100 5700一、阀门的选型步骤1.明确阀门在设备或装置中的用途，确定阀门的工作条件：适用介质、工作压力、工作温度等等。
中文四版-SMC样本
2.5, 4
CAT.C06-02A
6, 10, 15
CAT.C06-02A
6, 10, 16
CAT.C04-01A
错误内容 产品规格变更
改正日期 06年8月
型号表示错误，易造成选型错误 06年8月
螺纹表示错误，易造成选型错误 06年8月
注解错误，易造成选型错误
07年11月
产品尺寸错误，易造成选型错误 07年8月
内容更新
07年11月
内容更新
07年11月
产品尺寸错误，易造成选型错误 磁性开关变更 词汇更正、录入错误
CAT.ES20-152B CAT.ES20-177A CAT.E256A CAT.ES20-179B CAT.E216B CAT.ES20-95B CAT.ES20-157B P-1991-6 CAT.ES20-160A CAT.E204A CAT.ES20-159A CAT.ES20-159A CAT.ES20-159A CAT.ES20-147A
9
f
B1
h+
□C
ZZ + + 行程
□B
A KF N H
S + 行程 ZZ + 行程
N M
(mm)
缸径 行程范围 (mm)
A AL □B B1 □C D E F G H1
J
(mm) 无防护套 带防护套
无防护套
带防护套
K KA M MM N P S
H ZZ e f h
iec60417标准中文版
iec60417标准中文版IEC 60417标准概述IEC 60417是国际电工委员会（International Electrotechnical Commission）制订的图形符号规范，原定标准名称为IEC图形符号用于电子设备控制面板和指令系统。
该标准全称IEC 60417：图形符号控制面板/指令系统，它是世界上第一个规范电子产品用图形符号的国际标准，受到全世界的厂家和使用者的重视。
一、标准的目的1. 为了解决控制面板的混乱现象，协调控制面板图形符号的使用，确定电气、电子设备控制面板指令系统的标识符号；2. 精准明确图形符号的绘制，便于操作人员辨认操作以及设备设计者指定各种图形符号；3. 尽可能扩大图形符号的可识别范围，弥补不同种族、民族、文化语言及年龄等差异；4. 提高电子设备控制面板和指令系统的安全性能和可靠性。
1. 图示和叙述：本标准提供图形符号的视觉呈现形式和其语义的叙述；2. 符号的命名和叙述：本标准提供图形符号的识别系统，准确指定其语义，辨别与它有关的操作；3. 标准术语的提供：本标准提供了基础的电子设备控制面板和指令系统的术语，当用户使用时可以更加明确；4. 整体化设计思想：本标准在设计控制装置面板时，融合了用户情感和协调技术，使面板易于辨认和操作；5. 绘制规则：本标准要求符号绘制统一，表达能够精准明确，保证用户使用者能够熟练辨认；6. 材料特性：本标准规定图形符号及标识符号的材料为金属、塑料、玻璃、木料、金属层压板等，并指明材料的特性和用途；7. 面板安装尺寸要求：本标准为保证文本符号、按钮和旋钮图形符号安装要求，提出了具体的面板安装尺寸；8. 注释和警示颜色：本标准对面板上注释和警示标识也进行了统一规定，叙述了要使用的颜色，并且用不同颜色分别提醒操作者。
1. 标准的应用：IEC 60417标准的出台可以有效规范控制面板的使用，给用户操作提供明确的指引，减少学习的时间和识别的成本，提高操作的方便性和效率；2. 丰富符号资源：标准图形符号可以为用户提供更多的资源，促进符号的交流和使用，从而有利于国际交流；3. 保护用户权益：标准图形符号能够有效地提高控制面板的安全性和可靠性，保护操作者的合法利益；4. 推动行业进步：标准的规范性可以推动电子设备行业的进步与发展，使得研制的产品具备更为专业的形象和安全性。
SMC电磁阀型号编制方式
SMC电磁阀型号编制方式现如今SMC电磁阀的种类和原材料子类型愈来愈多，电磁阀型号的编制也越来越繁杂；电磁阀型号一般应表明电磁阀种类、防爆型方式、工作中方式、结构形式、联接方式、公称压力通径、工作压力级别、阀体料子等因素，电磁阀型号的规范化对电磁阀的设计方案、采用、经销商，出示了便捷。
尽管沒有电磁阀型号编制的统一标准，但渐渐融入电磁阀财产发展的必需；现阶段，SMC电磁阀生产厂一般选用统一的序号方式；不行选用统一序号方式的，各生产商可按自身的情形订立出序号方式。
SMC电磁阀型号编制方式的型号规格编制关键有电磁阀种类、安全防护方式、工作中方式、结构形式、联接方式、公称压力通径、工作压力级别、阀体料子、手动式作用、数据信号看法反馈作用、止回作用和的电磁阀型号表明方式，电磁阀型号编制方式适用各种电磁阀、不锈钢板、塑胶电磁阀、铸钢件电磁阀、髙压电磁阀、防爆型电磁阀、带手动式作用电磁阀、带数据信号看法反馈作用电磁阀、带止回作用电磁阀的管路电磁阀商品。
SMC电磁阀的工作中原理，电磁阀里有密闭式的腔，在的不一样部位开有埋孔，每一个孔都通往不一样的输油管，腔正中心是阀，双面是二块电磁线圈，哪侧的磁石电磁线圈插电油路板就会被吸引住到哪儿，依据掌控油路板的挪动来档住或露出不一样的泄油的孔，而进进油口是开与关的，齿轮油就会进到不一样的排输油管，随后依据油的工作压力来促进油刚的活塞，活塞又推动活塞杆，活塞竿推动机械设备设备动。
那样依据掌控电磁线圈的电流量就掌控了分子热运动。
归类：世界SMC电磁阀从原理上分成三大类（即：直动式、逐层直动式、主导式），而从活塞阀结构和原材料子上的不一样与原理上的差别又分成六个支系小项（直动脉冲阻尼器结构、逐层重片结构、主导膜式结构、直动活塞结构、逐层直动活塞结构、主导活塞结构），依照气套路分成2位2通，2位3通，2位4通，2位5通。
SMC电磁阀分成单电控和双电控，指的是磁铁线圈的数量，单电磁线圈的称之为单电控，双线圈的称之为双电控，2位2通，2位3通一般时是单电控（单电磁线圈），2位4通，2位5通能够是单电控（单电磁线圈），还可以是双电控（双线圈）。
起重机型号说明
起重机型号说明一.通用桥式起重机型号表示方法：□□—□□□用处：室外加W，室内省略，工作级别跨度，m，额定起重量，t，代号，见下表注：对于可供用户选择的要素，如电磁吸盘的型号，抓斗的规格，确切的起升高度，司机室的型式及入口方向，运行轨道的型号，机构工作级别的特殊要求，是否提供制冷或供热装置等，应另在订货合同中用文字说明。
标记示例：1.额定起重量20/5t，跨度19.5m，工作级别A5，室内用吊钩桥式起重机，应标记为：起重机QD 20/5-19.5A5 GB/T144052.额定起重量5t, 跨度16.5m，工作级别A6，室外用三用桥式起重机，标记为：起重机QS5-16.5A6 GB/T14405序号5∽7的名称，亦可称为二用桥式起重机。
二.通用门式起重机型号表示方法：□□—□□，工作级别跨度，m，额定起重量，t，代号，见下表注：对于可供用户选择的要素，如电磁吸盘的型号，抓斗的规格，确切的起升高度，司机室的型式及入口方向，运行轨道的型号，大车导电型式，机构工作级别的特殊要求，是否提供制冷或供热装置等，应另在订货合同中用文字说明。
标记示例：1.额定起重量20/5t，跨度22m，工作级别A4，单主梁吊钩门式起重机，应标记为：起重机MDG 20/5-22A4 GB/T144062.额定起重量50/10+50/101t, 跨度35m，工作级别A4，双梁，双小车吊钩门式起重机，标记为：起重机ME50/10+50/10-35A4 GB/T14406序号5∽6，12∽13的名称，亦可称为二用门式起重机。
三.手动梁式起重机型号表示方法：SL □—□—□起升高度，m，跨度，m，额定起重量，t，产品代号，标记示例：起重量5t，跨度10.5m，起升高度3m 的手动梁式起重机标记为：起重机SL5-10.5-3 JB/T1114-94四.手动桥式起重机型号表示方法：SQ □—□—□起升高度，m，跨度，m，额定起重量，t，产品代号，标记示例：起重量16t，跨度16.5m，起升高度12.5m 的手动桥式起重机标记为：起重机SQ16-16.5-12.5 JB/T1115-94五.电动单梁起重机型号表示方法：□□—□□□操纵方式：地面D，司机室S，工作级别跨度，m，额定起重量，t，产品代号，如下：产品代号：1.电动葫芦小车在主梁下翼缘运行，电动葫芦布置在主梁下方的起重机，其产品代号为LD。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
• VOLTAGE RANGE FROM 5.5V TO 185V • LOW INDUCTANCE• LOW PROFILE PACKAGE FOR SURFACE MOUNTINGDESCRIPTION:These Transient Voltage Suppressor devices are a series of Bi-directional Silicon Transient Suppressors used in AC applications where large voltage transients can permanently damage voltage-sensitive components.These devices are manufactured using two silicon PN, junctions in a back to back configuration. They are characterized by their high surge capability, fast response time, and low impedance, (R on ) for clamping surge.The SMC series, rated for 1500 watts during a one millisecond pulse, can be used to protect sensitive circuits against transients induced by lighting and inductive load switching. The response time of TAZ clamping action is less than (5x10 -9) sec;therefore, they can protect Integrated Circuits, MOS devices, Hybrids, and other voltage-sensitive semiconductors and components. This series of devices has also been proven very effective as EMP and ESD suppressors.MAXIMUM RATINGS:1500 watts of peak pulse power dissipation at 25°C t clamping (0 volts to V (BR) min): less than 5 x 10-9 seconds Operating and Storage Temperature: -65° to +150°CSteady state power dissipation: 5.0 watts at T L = 25°C, at mounting plane.Repetition rate (duty cycle): .01%8700 E. Thomas Road 5.5 thru 185 Volts 1500 Watts Transient Voltage SuppressorsMechanical CharacteristicsCASE: Molded, Surface Mountable.TERMINALS: Gull-wing or C-Bend (modified J-bend) leads, tin lead platedPOLARITY: No markings on bi-directional devices.PACKAGING: 16mm tape (See EIA Std. RS-481.)THERMAL RESISTANCE: 20°C/W (typical) junction to lead (tab) at mounting plane.tp Pulse Time Figure 1Peak Pulse Power vs Pulse TimeP P P P e a k P u l s e P o w e r - k W100µs1ms10msRatedStand-OffVoltageV RM (See Note 1)BREAKDOWNVOLTAGEV(BR)@I TVOLTSMAXIMUMCLAMPINGVOLTAGEV C @ I PP(1 mSEC)MAXIMUMSTANDOFFC U R R E N TI D@ V RMPEAKPULSECURRENT(See Fig. 2)I PPMaximumTemperatureCoefficientαV(BR)MICROSEMIPART NUMBER MODIFIED"G" BEND LEAD MICROSEMIPARTNUMBERMODIFIED"J"BEND LEADVOLTS MIN MAX mA VOLTSµA A%/°CSMCG6036SMCJ6036 5.5 6.758.251011.71000128.061 SMCG6036A SMCJ6036A 6.07.137.881011.31000132.061 SMCG6037SMCJ6037 6.57.389.021012.5500120.065 SMCG6037A SMCJ6037A7.07.798.611012.1500124.065 SMCG6038SMCJ60387.08.1910.001013.8200109.068 SMCG6038A SMCJ6038A7.58.659.551013.4200112.068 SMCG6039SMCJ60398.09.011.0115.050100.073 SMCG6039A SMCJ6039A8.59.510.5114.550103.073 SMCG6040SMCJ60408.59.912.1116.21093.075 SMCG6040A SMCJ6040A9.010.511.6115.61096.075 SMCG6041SMCJ60419.010.813.2117.3587.078 SMCG6041A SMCJ6041A10.011.412.6116.7590.078 SMCG6042SMCJ604210.011.714.3119.0579.081 SMCG6042A SMCJ6042A11.012.413.7118.2582.081 SMCG6043SMCJ604311.013.516.5122.0568.084 SMCG6043A SMCJ6043A12.014.315.8121.2571.084 SMCG6044SMCJ604412.014.417.5123.5564.086 SMCG6044A SMCJ6044A13.015.216.8122.5567.068 SMCG6045SMCJ604514.016.219.8126.5556.5.088 SMCG6045A SMCJ6045A15.017.118.9125.2559.5.088 SMCG6046SMCJ604616.018.022.0129.1551.5.090 SMCG6046A SMCJ6046A17.019.021.0127.7554.090 SMCG6047SMCJ604717.019.824.2131.9547.092 SMCG6047A SMCJ6047A18.020.923.1130.6549.092 SMCG6048SMCJ604819.021.626.4134.7543.094 SMCG6048A SMCJ6048A20.022.825.2133.2545.094 SMCG6049SMCJ604921.024.329.7139.1538.5.095 SMCG6049A SMCJ6049A22.025.728.4137.5540.096 SMCG6050SMCJ605024.027.033.0143.5534.5.097 SMCG6050A SMCJ6050A25.028.531.5141.4536.097 SMCG6051SMCJ605126.029.736.3147.7531.5.098 SMCG6051A SMCJ6051A28.031.434.7145.7533.098 SMCG6052SMCJ605229.032.439.6152.0529.099 SMCG6052A SMCJ6052A30.034.237.8149.9530.099 SMCG6053SMCJ605331.035.142.9156.4526.5.100 SMCG6053A SMCJ6053A33.037.141.0153.9528.100 SMCG6054SMCJ605434.038.747.3161.9524.101 SMCG6054A SMCJ6054A36.040.945.2159.3525.3.101 SMCG6055SMCJ605538.042.351.7167.8522.2.101 SMCG6055A SMCJ6055A40.044.749.4164.8523.2.101 SMCG6056SMCJ605641.045.956.1173.5520.4.102 SMCG6056A SMCJ6056A43.048.553.6170.1521.4.102 SMCG6057SMCJ605745.050.461.6180.5518.6.103 SMCG6057A SMCJ6057A47.053.258.8177.0519.5.103Note 1: A TAZ is normally selected according to the rated "Stand Off Voltage" V RM which should be equal to or greater than the DC or continuous peak operating voltage level.Rated Stand-Off Voltage VRM (See Note 1)BREAKDOWN VOLTAGE V (BR)@I T VOLTSMAXIMUM CLAMPING VOLTAGE V C @ I PP(1 mSECMAXIMUM STANDOFF C U R R E N T I D @ V RMPEAK PULSE CURRENT(See Fig. 2)I PPMaximum Temperature CoefficientαV (BR)MICROSEMIPART NUMBER MODIFIED"G"BEND LEADMICROSEMIPART NUMBER MODIFIED"J"BEND LEADVOLTS MIN MAX mA VOLTSµAA %/°C SMCG6058SMCJ605848.055.868.2189.0516.9.104SMCG6058A SMCJ6058A 53.058.965.1185.0517.7.104SMCG6059SMCJ605955.061.274.8198.0515.3.104SMCG6059A SMCJ6059A 58.064.671.4192.0516.3.104SMCG6060SMCJ606060.067.582.51108.0513.9.105SMCG6060A SMCJ6060A 64.071.378.81103.0514.6.105SMCG6061SMCJ606166.073.890.21118.0512.7.105SMCG6061A SMCJ6061A 70.077.986.11113.0513.3.105SMCG6062SMCJ606273.081.9100.01131.0511.4.106SMCG6062A SMCJ6062A 75.086.595.51125.0512.0.106SMCG6063SMCJ606381.090.0110.01144.0510.4.106SMCG6063A SMCJ6063A 82.095.0105.01137.0511.0.106SMCG6064SMCJ606490.099.0121.01158.059.5.107SMCG6064A SMCJ6064A 94.0105.0116.01152.059.9.107SMCG6065SMCJ606595.0108.0132.01176.058.5.107SMCG6065A SMCJ6065A 100.0114.0126.01168.058.9.107SMCG6066SMCJ6066105.0117.0143.01191.057.8.107SMCG6066A SMCJ6066A 110.0124.0137.01182.058.2.107SMCG6067SMCJ6067121.0135.0165.01223.05 6.7.108SMCG6067A SMCJ6067A 128.0143.0158.01213.057.0.108SMCG6068SMCJ6068137.0153.0187.01258.05 5.8.108SMCG6068A SMCJ6068A 145.0162.0179.01245.05 6.1.108SMCG6069SMCJ6069145.0162.0198.01274.05 5.5.108SMCG6069A SMCJ6069A 150.0171.0189.01261.05 5.7.108SMCG6070SMCJ6070155.0171.0210.01292.05 5.1.108SMCG6070A SMCJ6070A 160.0181.0200.01278.05 5.4.108SMCG6071SMCJ6071165.0180.0220.01308.05 4.9.108SMCG6071A SMCJ6071A 170.0190.0210.01294.05 5.1.108SMCG6072SMCJ6072175.0198.0242.01344.05 4.3.108SMCG6072A SMCJ6072A185.0209.0231.01328.054.6.108Microsemi Corp.'s SMC Series (1500W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact and low resistance path for surge current flow to ground. These high-speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices.75100T - Temperature - º CFIGURE 3Derating CurveP e a k P u l s e P o w e r (P P P ) o r C u r r e n t (I P P )I n P e r c e n t o f 25ºC R a t i n g505025150200t - Time - msecFigure 2Pulse Waveform100005000200010005002001005020105.0102050100200V BR Breakdown Voltage - VoltsFigure 4TYPICAL CAPACITANCEVS BREAKDOWN VOLTAGE123I P P P e a k P u l s e C u r r e n t - % I P P。