39426-0007中文资料
39426-0008中文资料
FEATURES AND SPECIFICATIONSSPECIFICATIONS 12.00mm (.472”) Pitch EuroMax™ High-Power Pluggable Terminal Blocks 39421 Horizontal Plug39422Horizontal Plug WithMounting Ends 39425Right-Angle Header 39426 Right-Angle HeaderWith Mounting EndsEuroMax terminal blocks are the highest amperage pluggable terminal blocks currently available on the market, offering up to 85.0A per circuit at 600V.Available in 2 to 10 circuits, with a wire range of 3 to 14 AWG, the EuroMax terminal blocks are an excitingaddition to our popular 600V one-piece fixed high-power terminal blocks (Series 39910, 39920, 39950and 39960). EuroMax terminal blocks provide anadditional advantage of pluggability for easy servicing or field repair and replacement.The two-piece pluggable connection system features a highly redundant parallel contact system to maximize performance. All hardware components are copper-based alloys to optimize thermal compatibility. The high-temperature housing material withstands lengthy solder pre-heat conditions. In addition, the header blade has 3 PCB tails, allowing for a robust connection to the PCB. A screw-driver slot is built-in on circuit counts of 4 or higher to help ease de-plugging.Reliable, economically stamped, one-piece terminals offer cost efficiency. They are also available with mounting ends for added security. EuroMax terminal blocks combine the benefits of high-power terminal blocks with the convenience of a pluggable design. Reference Information Packaging: Box UL File No.: E48521Guide No.: XCFR2UL for Canada File No.: E48521Guide No.: XCFR8Electrical Voltage: 600V Current: 85.0ADielectric Withstanding Voltage: 8500V DC min.Insulation Resistance: 5,000 Megohms min.MechanicalWire Range: 3 to 14 AWG (21.20 to 2.08mm 2)Strip Length: 16.00mm (.630 inch)Tightening Torque: 2.70Nm (24 in-lbs)Screwdriver: .25” Slotted, #2 PoziPhysical Plugs:Housing: Polybutylene Terephthalate (PBT)Valox* 420 SEO, Black Contact: Copper Alloy Contact Plating: TinScrew: M5 Pan head, slotted, Silicon Bronze Screw Plating: Tin Pressure Clamp: BrassPressure Clamp Plating: Nickel Headers:Housing: Polyamide 6/6, Black Contact: Copper Alloy Contact Plating: TinOperating Temperature: +130°CFeatures and BenefitsI Rising-cage pressure-clamp termination compresseswires evenly, providing a secure contact without wire damageI High-temperature housing material is able to withstand lengthy solder pre-heat conditions I Pluggable design provides easy servicing or replacement of device in the fieldI Stamped, one-piece terminals improve cost efficiencyI Header blade has 3 PCB tails, providing a robust connection to PCBTake power to the max with the new EuroMax TM high-power pluggable terminal blocks EuroMax Terminal Block without mounting ends*Valox is a registered trademark of GE PlasticsM4 MountingScrewsM4 ThreadedInsertsHeader BladeTerminalHeader BodyPlug BodyTerminal withBack PlateM5 ScrewPressureClampCapAPPLICATIONS12.00mm (.472”) PitchEuroMax™ High-PowerPluggable Terminal BlocksI Motors and drivesI Power controls and convertersI Process controlsI InvertorsI Distributed power systemsI Cellular base stationsI Load control systemsI Solar power systemsI Fuel cellsAmericas HeadquartersLisle, Illinois 60532 U.S.A.1-800-78MOLEXamerinfo@Far East North HeadquartersYamato, Kanagawa, Japan81-462-65-2324feninfo@Far East South HeadquartersJurong, Singapore65-6-268-6868fesinfo@European HeadquartersMunich, Germany49-89-413092-0eurinfo@Corporate Headquarters2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Fax:630-969-1352Visit our Web site at /product/tblocks/euromax.htmlOrder No. USA-304Printed in USA/2.5K/JI/JI/2005.04©2005 Molex ORDERING INFORMATIONCircuitsOrder No.Horizontal Plug Right-Angle HeaderWithout Mounting Ends With Mounting Ends Without Mounting Ends With Mounting Ends 239421-000239422-000239425-000239426-0002339421-000339422-000339425-000339426-0003439421-000439422-000439425-000439426-0004539421-000539422-000539425-000539426-0005639421-000639422-000639425-000639426-0006739421-000739422-000739425-000739426-0007839421-000839422-000839425-000839426-0008939421-0009—39425-0009—1039421-001039425-0010Horizontal PlugSeries 39421Horizontal Plug with Mounting EndsSeries 39422Right-Angle HeaderSeries 39425Right-Angle Header with Mounting EndsSeries 39426。
CHEMLOK 5150 产品安全数据表说明书
USA SAFETY DATA SHEET3000000027601. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CHEMLOK 5150 Product Use/Class:AdhesiveLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 08/07/20172. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Flammable liquids Category 2 Acute toxicity Oral Category 4Acute toxicity Inhalation - Vapours Category 3Acute toxicity Inhalation - Dust and Mist Category 2 Serious eye damage/eye irritation Category 2A Reproductive toxicity Category 1ASpecific target organ systemic toxicity (single exposure) Category 1 Central nervous system, retina, Systemic toxicity, EyesSpecific target organ systemic toxicity (single exposure) Category 3Specific target organ systemic toxicity (repeated exposure) Category 1 Liver, Central nervous system, Eyes, retina Specific target organ systemic toxicity (repeated exposure) Category 2 Nervous system Hazardous to the aquatic environment - acute hazard Category 3 Hazardous to the aquatic environment - chronic hazard Category 3GHS LABEL ELEMENTS: Symbol(s)Signal WordD ANGERHazard StatementsHighly flammable liquid and vapor. Harmful if swallowed. Fatal if inhaled.Causes serious eye irritation.May damage fertility or the unborn child.Causes damage to organs.(Central nervous system, retina, Systemic toxicity, Eyes) May cause respiratory irritation. May cause drowsiness or dizziness.Causes damage to organs through prolonged or repeated exposure.(Liver, Central nervous system, Eyes, retina) May cause damage to organs through prolonged or repeated exposure.(Nervous system) Harmful to aquatic life.Harmful to aquatic life with long lasting effects.Precautionary StatementsPreventionKeep away from heat/sparks/open flames/hot surfaces. - No smoking.Ground/Bond container and receiving equipment.Use explosion-proof electrical/ventilating/lighting equipment.Use only non-sparking tools.Take precautionary measures against static discharge.Obtain special instructions before use.Do not handle until all safety precautions have been read and understood.Wear protective gloves/protective clothing/eye protection/face protection.Use personal protective equipment as required.Wear respiratory protection.Do not breathe dust/fume/gas/mist/vapors/spray.Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Use only outdoors or in a well-ventilated area.Avoid release to the environment.ResponseIn case of fire: refer to section 5 of SDS for extinguishing media.Immediately call a POISON CENTER or doctor/physician.Specific treatment is urgent (see supplemental first aid instructions on this label).IF INHALED: Remove to fresh air and keep at rest in a position comfortable for breathing.IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing.Rinse mouth.StorageStore in a well-ventilated place. Keep cool.Store in a well-ventilated place. Keep container tightly closed.Store locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Vapor harmful; may affect the brain or nervous system causing dizziness, headache or nausea. May cause central nervous system depression characterized by the following progressive steps: headache, dizziness, staggering gait, confusion, unconsciousness or coma. Possible irritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. The silane material in this product can hydrolyze to form ethanol. Ethanol can cause moderate eye irritation, moderate skin irritation; and can be absorbed through the skin causing headache, nausea, and general discomfort. Ethanol is toxic by inhalation. If swallowed, the silane material in this product can hydrolyze in the stomach to form ethanol. Refer to the ethanol warnings on this (M)SDS. Contains methanol; may be harmful or fatal if swallowed; ingestion of methanol may cause blindness or permanent eye damage. Cannot be made non-poisonous. Dermal absorption possible.May cause mild skin irritation.Chronic: May cause kidney damage. May affect the gastrointestinal system. This material contains methanol.Ingestion of methanol may cause permanent eye damage or blindness. ACGIH considers Ethyl alcohol to be an A3 carcinogen (confirmed animal carcinogen with unknown relevance in humans).3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeMethanol67-56-185 - 90%Ethyl alcohol64-17-5 1 - 5%Organic phosphonium chloride salt PROPRIETARY 1 - 5%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Flammable liquid and vapor. Keep containers tightly closed. Isolate from heat, electrical equipment, sparks, open flame, and other sources of ignition. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). Water spray may be ineffective. If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT, AND EMERGENCY PROCEDURES: Remove all sources of ignition (flame, hot surfaces, and electrical, static or frictional sparks). Avoid breathing vapors. Use self-contained breathing equipment. Avoid contact.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Contain and remove with inert absorbent material and non-sparking tools. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form.7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Ground and bond containers when transferring material. Because empty containers may retain product residue and flammable vapors, keep away from heat, sparks and flame; do not cut, puncture or weld on or near the empty container. Do not smoke where this product is used or stored. Avoid breathing of vapor or spray mists. Use with adequate ventilation. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Cannot be made non-poisonous.STORAGE: Do not store or use near heat, sparks, or open flame. Store drum out of sun and away from heat. Store only in well-ventilated areas. Do not puncture, drag, or slide container. Keep container closed when not in use. Refer to OSHA29CFR Part 1910.106 "Flammable and Combustible Liquids" for specific storage requirements.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.8. EXPOSURE CONTROLS/PERSONAL PROTECTION COMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinMethanol200 ppm250 ppm260 mg/m3200 ppmN.E.SEthyl alcohol N.E.1,000 ppm1,900 mg/m31,000 ppmN.E.N.A.Organic phosphoniumchloride saltN.E.N.E.N.E. N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits. Caution: Solvent vapors are heavier than air and collect in lower levels of the work area. Sufficient ventilation (using explosion-proof equipment) should be provided to prevent flammable vapor/air mixtures from accumulating.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved chemical/mechanical filter respirator designed toremove a combination of particulates and organic vapor if occupational limits are exceeded. For emergencysituations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR 1910.134) or use in accordance with applicable laws and regulations of your country or particular locality.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Use disposable or impervious clothing if work clothing contamination is likely. Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in anychemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Alcohol VAPOR PRESSURE: N.D.APPEARANCE: Clear VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: 4.3 %(V)FLASH POINT: 43 °F, 6 °C SetaflashClosed CupUPPER EXPLOSIVE LIMIT: 36.5 %(V)BOILING RANGE: 65 - 100 °C EVAPORATION RATE: Faster than n-butyl-acetate.AUTOIGNITION TEMPERATURE:N.D.DENSITY: 0.82 g/cm3 - 6.85 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: N.D.ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: N.D.SOLUBILITY IN H2O: Insoluble VOLATILE BY WEIGHT: 94.65 %pH: N.A.VOLATILE BY VOLUME: 96.15 %FREEZE POINT: N.D. VOC CALCULATED: 6.33 lb/gal, 758 g/l COEFFICIENT OF WATER/OILDISTRIBUTION:N.D.LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions.STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures. Sources of ignition.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.HAZARDOUS DECOMPOSITION PRODUCTS: Oxides of nitrogen, Carbon monoxide, carbon dioxide, Oxides of silicon11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Methanol Oral LD50: Rat6,200 mg/kgDermal LD50: Rabbit15,800 mg/kgInhalation LC50: Rat22500 ppm/8 hEthyl alcohol Oral LD50: Rat7,060 mg/kgInhalation LC50: Rat124.7 mg/l/4 hOrganic phosphonium chloride salt Oral LD50: Rat43 mg/kgGHS LC50 (vapour): Acute toxicity point estimate3 mg/l GHS LC50 (dustand mist): Acute toxicity point estimate0.05 mg/lGerm cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: Category 1A - May damage fertility or the unborn child.Components contributing to classification: Methanol.12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityMethanol Fish: Pimephales promelas28,200 mg/l96 h flow-throughPimephales promelas> 100 mg/l96 h StaticOncorhynchus mykiss19,500 - 20,700 mg/l96 h flow-throughLepomis macrochirus13,500 - 17,600 mg/l96 h flow-throughEthyl alcohol Fish: Pimephales promelas> 100 mg/l96 h StaticPimephales promelas13,400 - 15,100 mg/l96 h flow-throughInvertebrates: Daphnia magna9,268 - 14,221 mg/l48 hDaphnia magna2 mg/l48 h StaticOrganic phosphonium chloride salt N.D.PERSISTENCE AND DEGRADABILITY:Not determined for this product.BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadDOT Proper Shipping Name: AdhesivesDOT Hazard Class: 3SECONDARY HAZARD: NoneDOT UN/NA Number: 1133Packing Group: IIEmergency Response Guide Number: 128IATA CargoPROPER SHIPPING NAME: AdhesivesDOT Hazard Class: 3HAZARD CLASS: NoneUN-NUMBER: 1133PACKING GROUP: IIEMS: 3LIMDGPROPER SHIPPING NAME: AdhesivesDOT Hazard Class: 3HAZARD CLASS: NoneUN-NUMBER: 1133PACKING GROUP: IIEMS: F-EThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:Chemical Name CAS Number Weight % Less ThanMethanol67-56-190.0%TOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 3 PHYSICAL HAZARD: 1* - Indicates a chronic hazard; see Section 2Revision: Section 2Effective Date: 08/07/2017DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。
分子筛代码
分子筛代码Go to T op A B C D E F G H I J K L M N O P R S T U V W Y Z Code T ype Material DateABW Li-A(BW) 1978ACO ACP-1 March 17, 1998AEI AlPO-18 1992AEL AlPO-11 1987AEN AlPO-EN3 May 17, 1999AET AlPO-8 1992AFG Afghanite 1978AFI AlPO-5 1987AFN AlPO-14 July 5, 1998AFO AlPO-41 1992AFR SAPO-40 1992AFS MAPSO-46 1987AFT AlPO-52 1992AFX SAPO-56 October 15, 1994 AFY CoAPO-50 1987AHT AlPO-H2 March 15, 1994 ANA Analcime 1978APC AlPO-C 1987APD AlPO-D 1987AST AlPO-16 1987ASV ASU-7 May 2, 2000(A TF) AlPO-25 1987discredited, see ATV ATN MAPO-39 1992ATO AlPO-31 1992ATS MAPO-36 1992ATT AlPO-12-TAMU 1987ATV AlPO-25 1992A WO AlPO-21 July 5, 1998A WAlPO-22 1992WGo to T op A B C D E F G H I J K L M N O P R S T U V W Y Z BCT Mg-BCCT June 14, 2001*BEBeta 1992ABEC FOS-5 (Beta polymorph C) June 14, 2001BIK Bikitaite 1978BOF UCSB-15 September 18, 2008 BOG Boggsite 1992BPH Beryllophosphate-H 1992BRE Brewsterite 1978BSV UCSB-7 September 18, 2008 CAN Cancrinite 1978CAS Cesium Aluminosilicate (Araki)1992CDO CDS-1 November 8, 2004 CFI CIT-5 March 17, 1998 CGF Cobalt-Galiium-Phosphate-5 August 11, 1996 CGS Cobalt-Gallium-Phosphate-6 September 29, 1997 CHA Chabazite 1978 -CHI Chiavennite 1987-CLO Cloverite 1992CON CIT-1 October 15, 1994 CZP Chiral Zincophosphate August 11, 1996 DAC Dachiardite 1978DDR Deca-Dodecasil-3R 1987DFO DAF-1 March 15, 1993 DFT DAF-2 July 5, 1998DOH Dodecasil-1H 1987DON UTD-1F May 17, 1999EAB TMA-E(AB) 1978EDI Edingtonite 1978EMT EMC-2 1992EON ECR-1 May 20, 2005EPI Epistilbite 1978ERI Erionite 1978ESV ERS-7 July 5, 1998ETR ECR-34 January 30, 2004 EUO EU-1 1987EZT EMM-3 October 29, 2006 Go to Top A B C D E F G H I J K L M N O P R S T U V W Y Z FAR Farneseite October 29, 2006 FAU Faujasite 1978FER Ferrierite 1978FRA Franzinite December 12, 2000 GIS Gismondine 1978GIU Giuseppettite November 8, 2004 GMGmelinite 1978EGOGUS-1 December 12, 2000 NGoosecreekite 1987OHEHeulandite 1978UIFR ITQ-4 April 30, 1997IHW ITQ-32 January 28, 2006 IMF IM-5 February 26, 2007ISV ITQ-7 May 17, 1999 ITE ITQ-3 September 29, 1997ITH ITQ-13 August 3, 2003 ITR ITQ-34 March 4, 2009 ITW ITQ-12 August 3, 2003 IWR ITQ-24 January 30, 2004 IVW ITQ-27 October 29, 2006 IWS ITQ-26 September 18, 2008 IWW ITQ-22 August 3, 2003JBNa-J (Barrer & White) 1992WJRY CoAPO-CJ40 March 4, 2009KFI ZK-5 1978LALaumontite 1978ULELevyne 1978VLIO Liottite 1978-LIT Lithosite May 20, 2005LO Losod 1978LOLovdarite 1987VL TA Linde Type A 1978LTF LZ-135 March 4, 2009L TLinde Type L 1978LL TLinde Type N 1987NGo to T op A B C D E F G H I J K L M N O P R S T U V W Y Z MAMarinellite September 15, 2004RMAMazzite 1978ZMEZSM-18 1992IMEZSM-11 1978LMEMelanophlogite 1987PMEMerlinoite 1978RMF ZSM-5 1978MFZSM-57 1992SMOMontesommaite 1992NMOMordenite 1978RMOZSM-10 January 28, 2006 ZMRE ZSM-48 September 18, 2008 MSE MCM-68 October 29, 2006MSMCM-61 May 17, 1999OMTMCM-35 August 2, 1999FMTZSM-39 1987NMTZSM-23 1987TMTZSM-12 1987WMVY MCM-70 January 13, 2010M MCM-22 April 30, 1997WNANabesite February 10, 2003 BNANatrolite 1978TNENU-87 1992SNONonasil 1987NNPO Oxonitridophosphate-1 January 30, 2004 NSI Nu-6(2) May 20, 2005OBOSB-2 September 15, 2004 WOFOffretite 1978FOSI UiO-6 April 12, 1996 OSOSB-1 December 12, 2000 O-PAPartheite 1987RPAPaulingite 1978UPHI Phillipsite 1978PON IST-1 Janaury 30, 2004PUN PKU-9 January 13, 2010Go to T op A B C D E F G H I J K L M N O P R S T U V W Y Z RHRho 1978O(-RRoggianite 1987OG)discredited, see -RON-RORoggianite July 4, 1992NRRO RUB-41 September 15, 2004RSRUB-17 October 15, 1994NRTRUB-3 October 15, 1994ERTRUB-13 October 15, 1994HRURUB-10 March 15, 1994TRWR RUB-24 September 15, 2004RWY UCR-20 August 3, 2003SAF STA-15 January 13, 2010SASTA-1 November 15, 1996OSAS STA-6 May 2, 2000SAT STA-2 September 29, 1997 SA V STA-7 May 2, 2000 SBE UCSB-8Co March 17, 1998 SBS UCSB-6GaCo March 17, 1998 SBN UCSB-9 January 29, 2008 SBT UCSB-10GaZn March 17, 1998 SFE SSZ-48 May 2, 2000 SFF SSZ-44 December 10, 1998 SFG SSZ-58 February 10, 2003 SFH SSZ-53 August 3, 2003 SFN SSZ-59 August 3, 2003 SFO SSZ-51 November 8, 2004 SFS SSZ-56 March 9, 2009SGSigma-2 1987TSIV SIV-7 October 29, 2006 SOSodalite 1978DSOF SU-15 September 18, 2008 SOS SU-16 November 8, 2004 SSF SSZ-65 January 29, 2008 SSY SSZ-60 January 30, 2004 STF SSZ-35 December 10, 1998STI Stilbite 1978*STO SSZ-31 (polymorph I) January 29, 2008 STT SSZ-23 July5, 1998STW SU-32 September 18, 2008 -SVR SSZ-74 September 18, 2008 SZR SUZ-4 October 29, 2006Terranovaite April 12, 1996RTHThomsonite 1978OTOL Tounkite-like mineral February 26, 2007TOTheta-1 1987NTSTsch?rtnerite March 17, 1998CTUN TNU-9 October 29, 2006Go to T op A B C D E F G H I J K L M N O P R S T U V W Y Z UEI Mu-18 April 1, 2002UFI UZM-5 February 10, 2003UOS IM-16 March 4, 2009UOZ IM-10 January 30, 2004USI IM-6 January 30, 2004UTL IM-12 September 15, 2004UWE UiO-28 May 20, 2005VEVPI-8 December 19, 1995TVFI VPI-5 1992VNI VPI-9 December 19, 1995VSVPI-7 March 15, 1994VWEWeinebeneite June1, 1993 I-W Wenkite 1987YUY ugawaralite 1978GZOZAPO-M1 April 17, 1995 N。
CHEMLOK 8110 商品安全数据表说明书
USA SAFETY DATA SHEET3000000013401. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct name: CHEMLOK 8110 Product Use/Class:Aqueous AdhesiveLORD Corporation 111 LORD DriveCary, NC 27511-7923 USATelephone: 814 868-3180Non-Transportation Emergency: 814 763-2345 Chemtrec 24 Hr Transportation Emergency No.800 424-9300 (Outside Continental U.S. 703 527-3887)EFFECTIVE DATE: 08/21/20192. HAZARDS IDENTIFICATIONGHS CLASSIFICATION:Skin sensitization Category 1Reproductive toxicity Category 1BSpecific target organ systemic toxicity (single exposure) Category 1 Respiratory system, Systemic toxicity Specific target organ systemic toxicity (repeated exposure) Category 1 Aspiration hazard Category 1Hazardous to the aquatic environment - acute hazard Category 2 Hazardous to the aquatic environment - chronic hazard Category 2GHS LABEL ELEMENTS: Symbol(s)Signal WordD ANGERHazard StatementsMay cause an allergic skin reaction.May damage fertility or the unborn child.Causes damage to organs.(Respiratory system, Systemic toxicity) Causes damage to organs through prolonged or repeated exposure. May be fatal if swallowed and enters airways. Toxic to aquatic life.Toxic to aquatic life with long lasting effects.Precautionary Statements PreventionObtain special instructions before use.Do not handle until all safety precautions have been read and understood. Wear protective gloves.Use personal protective equipment as required. Do not breathe dust/fume/gas/mist/vapors/spray. Wash thoroughly after handling.Do not eat, drink or smoke when using this product.Contaminated work clothing should not be allowed out of the workplace. Avoid release to the environment.ResponseGet medical advice/attention if you feel unwell.IF exposed: Call a POISON CENTER or doctor/physician.Specific treatment (see supplemental first aid instructions on this label).IF ON SKIN: Wash with plenty of soap and water.If skin irritation or rash occurs: Get medical advice/attention.IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician.Do NOT induce vomiting.Wash contaminated clothing before reuse.Collect spillage.StorageStore locked up.Disposal:Dispose of contents/container in accordance with waste/disposal laws and regulations of your country or particular locality.Other Hazards:This product contains component(s) which have the following warnings; however based on the GHS classification criteria of your country or locale, the product mixture may be outside the respective category(s).Acute: Vapor harmful; may affect the brain or nervous system causing dizziness, headache or nausea. May cause central nervous system depression characterized by the following progressive steps: headache, dizziness, staggering gait, confusion, unconsciousness or coma. Possible irritation of the respiratory system can occur causing a variety of symptoms such as dryness of the throat, tightness of the chest, and shortness of breath. May cause skin and eyeirritation. May be harmful if swallowed. Ingestion is not an expected route of entry in industrial or commercial uses.Chronic: Prolonged or repeated contact may result in dermatitis. Repeated or prolonged solvent overexposure may result in permanent central nervous system damage. Formaldehyde may be released from this product in processes that involve heat. Formaldehyde is a skin and respiratory sensitizer, eye and throat irritant, and acute toxicant.Formaldehyde has been identified by NTP and IARC as a known human carcinogen (IARC 1), and by OSHA as a potential human carcinogen. Workplace exposure to formaldehyde is regulated by OSHA Standard 29 CFR1910.1048. IARC has designated carbon black as Group 2B - inadequate evidence for carcinogenicity in humans, but sufficient evidence in experimental animals. In 2006 IARC reaffirmed its 1995 finding that there is "inadequateevidence" from human health studies to assess whether carbon black causes cancer in humans. Further,epidemiological evidence from well-conducted investigations has shown no causative link between carbon black exposure and the risk of malignant or non-malignant respiratory disease in humans. IARC has designated titanium dioxide (TiO2) as Group 2B – possibly carcinogenic to humans in dust form. However, a number of long termanimal studies and human epidemiology studies evaluating TiO2 and workplace exposure show insufficient evidence for carcinogenic effects. EPA, NTP and OSHA do not designate TiO2 as a carcinogen and ACGIH designates TiO2 as A4 - not classifiable as a human carcinogen. Mortaility from other chronic diseases, including other respiratory diseases, was not associated with exposure to TiO2 dust. TiO2 is not present in this product as a dust and no airborne exposure is expected during application.3. COMPOSITION/INFORMATION ON INGREDIENTSChemical Name CAS Number RangeZinc compound PROPRIETARY 5 - 10%Carbon black1333-86-4 1 - 5%Propylene glycol monomethylether107-98-2 1 - 5%Nonylphenol ethoxylate compound PROPRIETARY0.1 - 0.9%Titanium dioxide13463-67-70.1 - 0.9%Resorcinol108-46-30.1 - 0.9%Any "PROPRIETARY" component(s) in the above table is considered trade secret, thus the specific chemical and its exact concentration is being withheld.The above Nonylphenol ethoxylate compound is listed by ECHA as an SVHC.4. FIRST AID MEASURESFIRST AID - EYE CONTACT: Flush eyes immediately with large amount of water for at least 15 minutes holding eyelids open while flushing. Get prompt medical attention.FIRST AID - SKIN CONTACT: Flush contaminated skin with large amounts of water while removing contaminated clothing. Wash affected skin areas with soap and water. Get medical attention if symptoms occur.FIRST AID - INHALATION: Move person to fresh air. Restore and support continued breathing. If breathing is difficult, give oxygen. Get immediate medical attention.FIRST AID - INGESTION: If swallowed, do not induce vomiting. Call a physician or poison control center immediately for further instructions. Never give anything by mouth if victim is rapidly losing consciousness, unconscious or convulsing.5. FIRE-FIGHTING MEASURESSUITABLE EXTINGUISHING MEDIA: Carbon Dioxide, Dry Chemical, Foam, Water FogUNSUITABLE EXTINGUISHING MEDIA: Not determined for this product.SPECIFIC HAZARDS POSSIBLY ARISING FROM THE CHEMICAL: Keep containers tightly closed. Closed containers may rupture when exposed to extreme heat. Use water spray to keep fire exposed containers cool. During a fire, irritating and/or toxic gases and particulate may be generated by thermal decomposition or combustion.SPECIAL PROTECTIVE EQUIPMENT AND PRECAUTIONS FOR FIRE-FIGHTERS: Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA). If water is used, fog nozzles are preferable.6. ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES: Avoid contact. Avoid breathing vapors. Use appropriate respiratory protection for large spills or spills in confined area.ENVIRONMENTAL PRECAUTIONS: Do not contaminate bodies of water, waterways, or ditches, with chemical or used container.METHODS AND MATERIALS FOR CONTAINMENT AND CLEANUP: Keep non-essential personnel a safe distance away from the spill area. Notify appropriate authorities if necessary. Avoid contact. Before attempting cleanup, refer to hazard caution information in other sections of the SDS form. Contain and remove with inert absorbent material.7. HANDLING AND STORAGEHANDLING: Keep closure tight and container upright to prevent leakage. Avoid skin and eye contact. Wash thoroughly after handling. Do not handle until all safety precautions have been read and understood. Empty containers should not be re-used. Use with adequate ventilation.STORAGE: Store only in well-ventilated areas. Keep from freezing. Keep container closed when not in use.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.8. EXPOSURE CONTROLS/PERSONAL PROTECTIONCOMPONENT EXPOSURE LIMITChemical Name ACGIH TLV-TWA ACGIH TLV-STELOSHA PEL-TWAOSHA PEL-CEILINGSkinZinc compound 2 mg/m310 mg/m3 5 mg/m3 N.E.N.A.Carbon black 3 mg/m3N.E. 3.5 mg/m3 N.E.N.A. Propylene glycolmonomethylether100 ppm150 ppm N.E. N.E.N.A.Nonylphenol ethoxylatecompoundN.E.N.E.N.E. N.E.N.A.Titanium dioxide10 mg/m3N.E.15 mg/m3 N.E.N.A.Resorcinol10 ppm20 ppm N.E. N.E.N.A.N.A. - Not Applicable, N.E. - Not Established, S - Skin DesignationEngineering controls: Sufficient ventilation in pattern and volume should be provided in order to maintain air contaminant levels below recommended exposure limits.PERSONAL PROTECTION MEASURES/EQUIPMENT:RESPIRATORY PROTECTION: Use a NIOSH approved chemical/mechanical filter respirator designed toremove a combination of particulates and organic vapor if occupational limits are exceeded. For emergencysituations, confined space use, or other conditions where exposure limits may be greatly exceeded, use an approved air-supplied respirator. For respirator use observe OSHA regulations (29CFR 1910.134) or use in accordance with applicable laws and regulations of your country or particular locality. Note: If the exposure limit for formaldehyde is exceeded, a formaldehyde-specific, formaldehyde/organic vapor combination, or airline respirator may be required.SKIN PROTECTION: Use neoprene, nitrile, or rubber gloves to prevent skin contact.EYE PROTECTION: Use safety eyewear including safety glasses with side shields and chemical goggles where splashing may occur.OTHER PROTECTIVE EQUIPMENT: Remove and wash contaminated clothing before reuse.HYGIENIC PRACTICES: Wash hands before eating, smoking, or using toilet facility. Do not smoke in anychemical handling or storage area. Food or beverages should not be consumed anywhere this product is handled or stored. Wash thoroughly after handling.9. PHYSICAL AND CHEMICAL PROPERTIESTypical values, not to be used for specification purposes.ODOR: Mild VAPOR PRESSURE: N.D.APPEARANCE: Gray VAPOR DENSITY: Heavier than Air PHYSICAL STATE: Liquid LOWER EXPLOSIVE LIMIT: 1.6 %(V)FLASH POINT:≥ 201 °F, 93 °CUPPER EXPLOSIVE LIMIT: 13.8 %(V)Setaflash Closed CupBOILING RANGE: 100 - 120 °C EVAPORATION RATE: Slower than n-butyl-acetate AUTOIGNITION TEMPERATURE:N.D.DENSITY: 1.16 g/cm3 - 9.67 lb/gal DECOMPOSITION TEMPERATURE:N.D. VISCOSITY, DYNAMIC: ≥20 mPa.s @ 25 °C ODOR THRESHOLD: N.D.VISCOSITY, KINEMATIC: ≥17 mm2/s @ 25 °CSOLUBILITY IN H2O: Water Dispersible VOLATILE BY WEIGHT: 64.55 %pH: 6.5VOLATILE BY VOLUME: 75.28 %FREEZE POINT: 32 F VOC CALCULATED: 1.23 lb/gal, 148 g/l COEFFICIENT OF WATER/OILN.D. METHOD 24: 1.70 lb/gallonDISTRIBUTION:LEGEND: N.A. - Not Applicable, N.E. - Not Established, N.D. - Not Determined10. STABILITY AND REACTIVITYHAZARDOUS POLYMERIZATION: Hazardous polymerization will not occur under normal conditions. STABILITY: Product is stable under normal storage conditions.CONDITIONS TO AVOID: High temperatures. Sources of ignition.INCOMPATIBILITY: Strong acids, bases, and strong oxidizers.HAZARDOUS DECOMPOSITION PRODUCTS: May contain CO, CO2, oxides of nitrogen, oxides of sulfur, halogenated by-products, Metal oxides11. TOXICOLOGICAL INFORMATIONEXPOSURE PATH: Refer to section 2 of this SDS.SYMPTOMS:Refer to section 2 of this SDS.TOXICITY MEASURES:Chemical Name LD50/LC50Zinc compound Oral LD50: Rat> 5,000 mg/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Carbon black Oral LD50: Rat> 15,400 mg/kgDermal LD50: Rabbit> 3 g/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Propylene glycol monomethylether Oral LD50: Rat5,000 mg/kgDermal LD50: Rabbit13 g/kgGHS LC50 (vapour): Acute toxicity point estimate11 mg/l GHS LC50(dust and mist): Acute toxicity point estimate1.5 mg/l Inhalation LC50:Rat>7559 ppm/6 hNonylphenol ethoxylate compound N.D.Titanium dioxide Oral LD50: Rat> 10,000 mg/kgDermal LD50: rabbit> 5,000 mg/kgGHS LC50 (vapour): Acute toxicity point estimate55 mg/l Resorcinol Oral LD50: Rat202 mg/kgDermal LD50: Rabbit3,360 mg/kgInhalation LC50: Rat21.3 mg/l/1 hGerm cell mutagenicity: No classification proposedCarcinogenicity: No classification proposedReproductive toxicity: Category 1B - May damage fertility or the unborn child.Components contributing to classification: Methanol.12. ECOLOGICAL INFORMATIONECOTOXICITY:Chemical Name EcotoxicityZinc compound N.D.Carbon black N.D.Propylene glycol monomethylether Fish: Pimephales promelas20.8 g/l96 h StaticInvertebrates: Daphnia magna23,300 mg/l48 hNonylphenol ethoxylate compound N.D.Titanium dioxide N.D.Resorcinol Fish: Pimephales promelas36 - 100 mg/l96 h StaticPimephales promelas100 mg/l96 h flow-throughOncorhynchus mykiss> 100 mg/l96 h flow-throughPimephales promelas53.4 mg/l96 hInvertebrates: Daphnia magna78 mg/l48 hPERSISTENCE AND DEGRADABILITY:Not determined for this product. BIOACCUMULATIVE: Not determined for this product.MOBILITY IN SOIL: Not determined for this product.OTHER ADVERSE EFFECTS: Not determined for this product.13. DISPOSAL CONSIDERATIONSDISPOSAL METHOD: Disposal should be done in accordance with Federal (40CFR Part 261), state and local environmental control regulations. If waste is determined to be hazardous, use licensed hazardous waste transporter and disposal facility.14. TRANSPORT INFORMATIONUS DOT RoadProper Shipping Name: Environmentally hazardous substances, liquid, n.o.s.Hazard Class: 9SECONDARY HAZARD: NoneUN/NA Number: 3082Packing Group: IIIEmergency Response Guide Number: 171For US DOT non-bulk road shipments this material may be classified as NOT REGULATED. For the mostaccurate shipping information, refer to your transportation/compliance department regarding changes inpackage size, mode of shipment or other regulatory descriptors.IATA CargoPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: 9LIMDGPROPER SHIPPING NAME: Environmentally hazardous substance, liquid, n.o.s.Hazard Class: 9HAZARD CLASS: NoneUN NUMBER: 3082PACKING GROUP: IIIEMS: F-AThe listed transportation classification applies to non-bulk shipments. It does not address regulatory variations due to changes in package size, mode of shipment or other regulatory descriptors. For the most accurate shipping information, refer to your transportation/compliance department.15. REGULATORY INFORMATIONU.S. FEDERAL REGULATIONS: AS FOLLOWS:SARA SECTION 313This product contains the following substances subject to the reporting requirements of Section 313 of Title III of the Superfund Amendment and Reauthorization Act of 1986 and 40 CFR part 372.:Chemical Name CAS Number Weight % Less ThanZinc compound PROPRIETARY10.0%TOXIC SUBSTANCES CONTROL ACT:INVENTORY STATUSThe chemical substances in this product are on the TSCA Section 8 Inventory.EXPORT NOTIFICATIONThis product contains the following chemical substances subject to the reporting requirements of TSCA 12(B) if exported from the United States:None16. OTHER INFORMATIONUnder HazCom 2012 it is optional to continue using the HMIS rating system. It is important to ensure employees have been trained to recognize the different numeric ratings associated with the HazCom 2012 and HMIS schemes.HMIS RATINGS - HEALTH: 2* FLAMMABILITY: 1 PHYSICAL HAZARD: 0* - Indicates a chronic hazard; see Section 2Revision: Section 2, Section 11Effective Date: 08/21/2019DISCLAIMERThe information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages incurred by use of this material. It is the responsibility of the user to comply with all applicable federal, state and local laws and regulations.。
准予登记的进口棉花境外供货企业名单及证书号123456789
C110090217
第七批准予登记的境外棉花企业
序号
公司名称
国别/地区
证书号
01
建泰纺织有限公司JIAN TAI TEXTILE LIMITED
中国香港
02
港新有限公司SUPERIOR WAVE LIMITED
中国香港
03
ASHA COTTON INDUSTRIES
印度
04
RAVIINTERPRISES
DAEWOO INTERNATIONAL(AMERICA) CORP.
美国
C502090168
22
Newell Uni-Tech,Inc.
美国
C502090169
第四批准予登记的境外棉花企业
序号
公司名称
国别/地区
证书号
01
龙飞实业有限公司LUNG FEI INDUSTRIES COMPANY LIMITED
印度
C110100227
11
HARAN TEXTILE COMPANY
印度
C110100228
12
LESHA IMPEX PRIVATE LIMITED
印度
C110100229
13
SRINIDHI COTTONS PVT LTD
印度
C110100230
14
BANSHI COTTON PRIVATE LIMITED
英属维尔京群岛
C110100242
第八批准予登记的境外棉花企业
序号
公司名称
国别/地区
证书号
01
新兴利纺织有限公司SUN HING LEE TEXTILE LIMITED
中国香港
原辅料材料代码
原料名称
50um亮白PET TC 50um亮白PET TC 50um亚银PET TC 经济型镜面铜版纸 镜面铜版纸 镜面铜版纸 优质镜面铜版纸/ 黄底铜版纸 铜版纸 铜版纸 60克轻质铜版纸 61克轻质铜版纸 70克亚光纸 亚光纸 70克亚光纸 激光打印纸/ 优质激光打印纸 经济型激光打印纸 油筒标镜面铜版纸 可移除镜面铜版纸 油筒标铜版纸 铜版纸 经济型铜版纸 铜版纸 可移除铜版纸 铜版纸 无荧光铜版纸 可分离铜版纸 铜版纸 热熔胶镜面铜版纸 热熔胶铜版纸 厚格底铜版纸 铜版纸 服装标签 铜版纸 50um格底透明BOPP 合成纸 透明底透明BOPP 亮银BOPP 50um格底透明BOPP 白PE85 透明PE85
OS620 A228
上海柏妮 上海柏妮 上海柏妮 冠生园
上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海致胜 上海赓影 上海赓影 上海赓影 上海赓影 温州晨辉 温州晨辉 温州晨辉 温州晨辉 温州晨辉 温州晨辉 上海尚天 上海尚天 上海诚辰
BW9675 塑料瓶专用（花王）
BW9328美科专用 BW9567
防水胶 交期为5个工作日
有涂层
有涂层 有涂层 有涂层 NW1568
轮胎标签 美科专用
价格有差异 CFRP3701 只能用于凸印，不能用于柔印生产
蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 蓝泰 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝 金利宝
Perkadox 26 商品数据单（Dimyristyl peroxydicarbonate）说明书
Product Data SheetPerkadox 26Dimyristyl peroxydicarbonatePerkadox® 26 is an initiator for (co)polymerization of (meth)acrylates.CAS number53220-22-7EINECS/ELINCS No.258-436-4TSCA statuslisted on inventoryMolecular weight514.8SpecificationsAppearance White flakesAssay≥96.0 %Inorganic + organic hydrolysable chloride≤ 100 mg/kgCharacteristicsBulk density480 kg/m³Melting point42 °CApplicationsPerkadox® 26 can be used for the market segments: polymer production, thermoset composites and acrylics production with their different applications/functions. For more information please check our website and/or contact us.Thermal stabilityOrganic peroxides are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test.SADT35°C (95°C)Emergency temperature (Tₑ)25°C (77°F)Control temperature (Tc)20°C (68°F)Method The Heat Accumulation Storage Test is a recognized test method for the determinationof the SADT of organic peroxides (see Recommendations on the Transport ofDangerous Goods, Manual of Tests and Criteria - United Nations, New York andGeneva).StorageDue to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, Nouryon recommends a maximum storage temperatureTs max.15°C (59°F)Note When stored under these recommended storage conditions, Perkadox® 26 will remainwithin the Nouryon specifications for a period of at least 3 months after delivery.Packaging and transportThe standard packaging is a cardboard box for 25 kg or 4 x 5 kg peroxide. Both packaging and transport meet the international regulations. For the availability of other packed quantities contact your Nouryon representative. Perkadox® 26 is classified as Organic peroxide type D; solid, temperature controlled, Division 5. 2; UN 3116.Safety and handlingKeep containers tightly closed. Store and handle Perkadox® 26 in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room. Avoid contact with reducing agents (e. g. amines), acids, alkalis and heavy metal compounds (e. g. accelerators, driers and metal soaps). Dissolving Perkadox® 26 in reactive monomer is not recommended. Please refer to the Safety Data Sheet (SDS) for further information on the safe storage, use and handling of Perkadox® 26. This information should be thoroughly reviewed prior to acceptance of this product. The SDS is available at /sds-search.Major decomposition productsCarbon dioxide, TetradecanolAll information concerning this product and/or suggestions for handling and use contained herein are offered in good faith and are believed to be reliable. Nouryon, however, makes no warranty as to accuracy and/or sufficiency of such information and/or suggestions, as to the product's merchantability or fitness for any particular purpose, or that any suggested use will not infringe any patent. Nouryon does not accept any liability whatsoever arising out of the use of or reliance on this information, or out of the use or the performance of the product. Nothing contained herein shall be construed as granting or extending any license under any patent.Customer must determine for himself, by preliminary tests or otherwise, the suitability of this product for his purposes. The information contained herein supersedes all previously issued information on the subject matter covered. The customer may forward, distribute, and/or photocopy this document only if unaltered and complete, including all of its headers and footers, and should refrain from any unauthorized use. Don’t copy this document to a website.Perkadox®, Trigonox and Laurox are registered trademarks of Nouryon Functional Chemicals B.V. or affiliates in one or more territories.Contact UsPolymer Specialties Americas************************Polymer Specialties Europe, Middle East, India and Africa*************************Polymer Specialties Asia Pacific************************2023-4-25© 2023Acrylics production Perkadox 26。
海关商品编码
3004909072
7
androst-5-ene-3α,17β-diol
雄-5-烯-3α，17β-二醇*
2906199013
3004909073
8
androst-5-ene-3β,17α-diol
雄-5-烯-3β，17α-二醇*
2937290011
3004320014
9
4-androstenediolandrost-4-ene-3β,17β-diol
3004320028
26
desoxymethyltestosterone
脱氧甲基睾酮*
2937290014
3004320029
27
dihydrotestosterone
双氢睾酮
2937290015
3004320029
28
drostanolone
屈他雄酮（羟甲雄酮）
2937290015
3004320028
74
zilpaterol
齐帕特罗
2933990040
3004909078
美雄酮
2937290017
3004320035
43
methasterone
2α,17α-二甲基-5α-雄烷-3-酮-17β-醇
2937290017
3004320036
44
methyldienolone
17α-甲基-17β-羟基雌-4，9（10）-二烯-3-酮*
2937290018
3004320037
39
3β-hydroxy-5β-androstan-17-one
3β-羟基-5β-雄烷-17-酮*
2914400020
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
FEATURES AND SPECIFICATIONSSPECIFICATIONS 12.00mm (.472”) Pitch EuroMax™ High-Power Pluggable Terminal Blocks 39421 Horizontal Plug39422Horizontal Plug WithMounting Ends 39425Right-Angle Header 39426 Right-Angle HeaderWith Mounting EndsEuroMax terminal blocks are the highest amperage pluggable terminal blocks currently available on the market, offering up to 85.0A per circuit at 600V.Available in 2 to 10 circuits, with a wire range of 3 to 14 AWG, the EuroMax terminal blocks are an excitingaddition to our popular 600V one-piece fixed high-power terminal blocks (Series 39910, 39920, 39950and 39960). EuroMax terminal blocks provide anadditional advantage of pluggability for easy servicing or field repair and replacement.The two-piece pluggable connection system features a highly redundant parallel contact system to maximize performance. All hardware components are copper-based alloys to optimize thermal compatibility. The high-temperature housing material withstands lengthy solder pre-heat conditions. In addition, the header blade has 3 PCB tails, allowing for a robust connection to the PCB. A screw-driver slot is built-in on circuit counts of 4 or higher to help ease de-plugging.Reliable, economically stamped, one-piece terminals offer cost efficiency. They are also available with mounting ends for added security. EuroMax terminal blocks combine the benefits of high-power terminal blocks with the convenience of a pluggable design. Reference Information Packaging: Box UL File No.: E48521Guide No.: XCFR2UL for Canada File No.: E48521Guide No.: XCFR8Electrical Voltage: 600V Current: 85.0ADielectric Withstanding Voltage: 8500V DC min.Insulation Resistance: 5,000 Megohms min.MechanicalWire Range: 3 to 14 AWG (21.20 to 2.08mm 2)Strip Length: 16.00mm (.630 inch)Tightening Torque: 2.70Nm (24 in-lbs)Screwdriver: .25” Slotted, #2 PoziPhysical Plugs:Housing: Polybutylene Terephthalate (PBT)Valox* 420 SEO, Black Contact: Copper Alloy Contact Plating: TinScrew: M5 Pan head, slotted, Silicon Bronze Screw Plating: Tin Pressure Clamp: BrassPressure Clamp Plating: Nickel Headers:Housing: Polyamide 6/6, Black Contact: Copper Alloy Contact Plating: TinOperating Temperature: +130°CFeatures and BenefitsI Rising-cage pressure-clamp termination compresseswires evenly, providing a secure contact without wire damageI High-temperature housing material is able to withstand lengthy solder pre-heat conditions I Pluggable design provides easy servicing or replacement of device in the fieldI Stamped, one-piece terminals improve cost efficiencyI Header blade has 3 PCB tails, providing a robust connection to PCBTake power to the max with the new EuroMax TM high-power pluggable terminal blocks EuroMax Terminal Block without mounting ends*Valox is a registered trademark of GE PlasticsM4 MountingScrewsM4 ThreadedInsertsHeader BladeTerminalHeader BodyPlug BodyTerminal withBack PlateM5 ScrewPressureClampCapAPPLICATIONS12.00mm (.472”) PitchEuroMax™ High-PowerPluggable Terminal BlocksI Motors and drivesI Power controls and convertersI Process controlsI InvertorsI Distributed power systemsI Cellular base stationsI Load control systemsI Solar power systemsI Fuel cellsAmericas HeadquartersLisle, Illinois 60532 U.S.A.1-800-78MOLEXamerinfo@Far East North HeadquartersYamato, Kanagawa, Japan81-462-65-2324feninfo@Far East South HeadquartersJurong, Singapore65-6-268-6868fesinfo@European HeadquartersMunich, Germany49-89-413092-0eurinfo@Corporate Headquarters2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Fax:630-969-1352Visit our Web site at /product/tblocks/euromax.htmlOrder No. USA-304Printed in USA/2.5K/JI/JI/2005.04©2005 Molex ORDERING INFORMATIONCircuitsOrder No.Horizontal Plug Right-Angle HeaderWithout Mounting Ends With Mounting Ends Without Mounting Ends With Mounting Ends 239421-000239422-000239425-000239426-0002339421-000339422-000339425-000339426-0003439421-000439422-000439425-000439426-0004539421-000539422-000539425-000539426-0005639421-000639422-000639425-000639426-0006739421-000739422-000739425-000739426-0007839421-000839422-000839425-000839426-0008939421-0009—39425-0009—1039421-001039425-0010Horizontal PlugSeries 39421Horizontal Plug with Mounting EndsSeries 39422Right-Angle HeaderSeries 39425Right-Angle Header with Mounting EndsSeries 39426。