5LP01N-E中文资料

合集下载

德尼森水力系统R5型号系列产品说明书

Pressure setting range 1 = 7...105 bar (R5U: Pressure differential 20 %) 3 = 7...210 bar (R5U: Pressure differential 20 %) 5 = 7...350 bar (R5U: Pressure differential 15 %) 6 = 7...420 bar (R5V12 only)
R5V08/10/12 Pilot VP01 (P2)
R5V08/10
R5V12
SERVICE INFORMATION R5U 3
R5U06
VV01 R5U08/10
R5U12
R5S08/10
SERVICE INFORMATION R5S 4
VV01
R5S06
SERVICE INFORMATION 5
Type of control 1 = Hand knob 32 mm dia. 2 = Hand knob 50 mm dia. (not for version with vent valve VV01 or P2) 3 = Acorn nut with lead seal 4 = Adjusting device with key lock (key order no. 700–70619)
AC
W07 = 230 V / 50 Hz
k 1) G0R = 12 V G0Q = 24 V DC G0H = 48 V 1) R5V . . . . P2 = 12 V DC only
Design letter
Seal class 1 = Standard (for special fluids consult DENISON)

PHOENIX CONTACT 5孔绿色插针5-pos版商品说明书

Extract from the onlinecatalogPCV 4/ 2-G-7,62Order No.: 1804687The figure shows a 5-pos. version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1804687Header, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 2, Color: green, Assembly: Solderinghttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch7.62 mmDimension a7.62 mmNumber of positions2Pin dimensions 1 x 0,8 mmHole diameter 1.3 mmTechnical dataInsulating material group IRated surge voltage (III/3) 6 kVRated surge voltage (III/2) 6 kVRated surge voltage (II/2) 6 kVRated voltage (III/2)630 VRated voltage (II/2)630 VConnection in acc. with standard EN-VDENominal current I N20 ANominal voltage U N400 VMaximum load current20 AInsulating material PAInflammability class acc. to UL 94V0Certificates / ApprovalsCertification BV, CSA, CUL, DNV, GL, GOST, LR, RS, ULCSANominal voltage U N300 VNominal current I N20 ACULNominal voltage U N300 VNominal current I N35 AULNominal voltage U N300 VNominal current I N35 AAccessoriesItem Designation DescriptionAssembly1827570BF-PC 4Mounting flange, is snapped onto the left and right of the headers,for screw connection with PC 4/...-STF-7.62Marking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0804549SK 7,62/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 10-section markerstrip, 12 identical decades marked 1-10, 11-20 etc. up to 91-99,sufficient for 120 terminal blocks0805153SK 7,62/3,8:SO Marker card, special printing, self-adhesive, labeled acc. tocustomer requirements, 12 identical marker strips per card, max.25-position labeling per strip, color: white0803906SK U/3,8 WH:UNBEDRUCKT Unprinted marker cards, DIN A4 format, pitch as desired, self-adhesive, with 40 stamped marker strips, 185 mm strip length, canbe labeled with the CMS system or manually with the M-PENPlug/Adapter1600027CP-HCC 4Coding profile, Color: redAdditional productsItem Designation DescriptionGeneral1848892PC 4 HV/ 2-ST-7,62Plug component, Nominal current: 20 A, Nom. voltage: 800 V,Pitch: 7.62 mm, Number of positions: 2, Connection type: Screwconnection, Color: green1882379PC 4 HV/ 2-STF-7,62Plug component, Nominal current: 20 A, Nom. voltage: 800 V,Pitch: 7.62 mm, Number of positions: 2, Connection type: Screwconnection, Color: green1804904PC 4/ 2-ST-7,62Plug component, Nominal current: 20 A, Nom. voltage: 400 V,Pitch: 7.62 mm, Number of positions: 2, Connection type: Screwconnection, Color: green1828249PC 4/ 2-STF-7,62Plug component, Nominal current: 20 A, Nom. voltage: 400 V,Pitch: 7.62 mm, Number of positions: 2, Connection type: Screwconnection, Color: green1840191PCC 4/ 2-ST-7,62Plug component, Nominal current: 20 A, Nom. voltage: 400 V,Pitch: 7.62 mm, Number of positions: 2, Connection type: Crimpconnection, Color: greenDiagrams/DrawingsDrilling plan/solder pad geometryDimensioned drawingAddressPHOENIX CONTACT Inc., USA586 Fulling Mill Road Middletown, PA 17057,USA Phone (800) 888-7388Fax (717) 944-1625© 2010 Phoenix Contact Technical modifications reserved;。

TL1010_EN中文注释

Group StandardTL 1010Issue 2008-01Class. No.: 55000Descriptors:flammability, combustibility, burning behavior, flame retardance, interior trimConfidential. All rights reserved. No part of this document may be transmitted or reproduced without the prior permission of a Standards Department within the Volkswagen Group.Contract partners shall obtain the standard only through the B2B supplier platform .© VOLKSWAGEN AGvwnorm-2007-07DMaterials for Vehicle InteriorsBurning Behavior, Material Requirements Previous issuesTL 1010: 1971-10, 1972-04, 1972-09, 1974-08, 1975-09, 1985-02, 1993-01Changes The following changes have been made as compared to Technical Supply Specification TL 1010: 1997-05: ņSection 3.1 expanded cPage 2Issue TL 1010: 2008-01DC o m p o s i t e m a t e r i a l s : Parts that are made up of multiple layers of the same material or dif-Figure 1). Abbreviations:BR: Burning RateNBR: No Burning Rate SE: Self-Extinguishing (A = single material, B and C = composite material)Figure 1c spe ifi doPage 3Issue TL 1010: 2008-01D3.4 BurningSee Table 1. The tests are performed on unaged material and material that has been aged accord-ing to Test Specification PV 3904. The test results determined on aged material are not subject tomandatory documentation. Test results on parts with a sample length of < 100 mm are also not subject to mandatory documentation. For such parts, an agreement can be reached to performtesting on sheet material whose thickness corresponds to the minimum wall thickness or thicknessof the finished parts. Table 14 Notes on testing 4.1Test equipment and method according to U.S. Regulation 571.302 and according to DIN 75200. Specimens shall be taken from the material direction with the highest burning rate. The material surface that is located closest to the air space of the passenger compartment shall face downward. Except for specimens < 51 mm in width, the use of support wires is not permitted for specimens that, when exposed to flame (in a preliminary test), deflect, roll up and exhibit irregular burning due to the fact that the burn-off is no longer horizontal.The following applies to parts with a specimen length < 100 mm: distance between support wires 10 mm, first wire is 10 mm from the open end of the holder. 5 Referen c ed do c umentsThe following documents cited in this standard are necessary for application.In this Section, terminological inconsistencies may occur as the original titles are used. VW 01155 Vehicle Supply Parts; Approval of First Supply and Changes VW 91101 Environmental Standard for Vehicles; Vehicle Parts, Materials, Operating Fluids;Avoidance of Hazardous SubstancesDIN 75200 Determination of Burning Behavior of Interior Materials in Motor Vehicles。

蓝海华腾注塑机节能专用变频器V5-I说明书080710

1.1 塑机行业专用功能参数一览表
功能码号
功能码名称
出厂值
H0.00 塑机频率给定方式选择
0
流量信号 AV4/AI4 滤波时
H0.01 间
Байду номын сангаас0.004
压力信号 AV5/AI5 滤波时
H0.02 间
0.004
H0.03 塑机频率给定用户定义 1
0
H0.04 流量系数 K1
50.0
H0.05 塑机频率给定用户定义 2
EX-PM01
技术指标
提供 2 路 24V 输入端子。提供 2 路 0~2A、0~1A 输入端子。通过跳线确定电压/电流输入，通过跳线选择电流输入范围 0~2A、0~1A。
接口卡端子外观
AV4/AI4 端子输入电压或者电流流量信号，AV4 端子输入电压流量信号，AI4 端子输入电流流量信号； AV5/AI5 端子输入电压或者电流压力信号，AV5 端子输入电压压力信号，AI5 端子输入电流压力信号。
V5-I 变频器的注塑机专用功能设置
功能序号 H0.00 H0.03 H1.00 H1.08 A0.00
名称塑机频率给定方式选择塑机频率给定用户定义数字端子逻辑运算模式模拟量数学运算模式用户自定义功能码显隐区密码
注塑机塑机配套中的作用
可自定义不同的控制参数组并存储在变频器中，通过控制面板或者端子可在线灵活切换可提供流量和压力曲线（4 点 5 段）各 3 条，流量和压力对应频率的关系可自定义可结合注塑机电脑板对变频器的任意数字输入进行“软 PLC”的逻辑运算并可通过变频器数字端子输出运算结果可结合注塑机电脑板对变频器的任意模拟输入进行“软 PLC”的数学运算并可通过运算结果控制变频器的输出用户可对自行定义的变频器功能码进行隐藏，并用密码对这些隐藏的功能码进行保护

荷重保护器 LCP 型号 LCP01A 说明书

特点• 6线及屏蔽层保护-适合4线或6线系统• 适用于张力和压力传感器• 低串联阻抗-无需标定称重传感器• N EMA-12 (IP-55)-适合室外安装• 保护过电压损害-防止称重传感器毁坏
经验表明变形测量仪易受到浪涌电压的损害。

工业起重机也是雷击的首选目标。

LCP 非常适合用于保护起重机内各种荷重传感器。

LCP 保护4线或6线系统，保护内部桥式电路，采用低电容器件，避免产生接地环流。

模式LCP 01A 欧洲型号701610警告滨特尔的产品应该按照滨特尔的产品指导说明书和培训材料的指示来安装。

安装指导材料可以从/ERICO 和滨特尔的客服代表处获取。

错误的安装、不正常使用和应用以及不完全遵守滨特尔的安装指导和警告都有可能引起产品功能的不正常、潜在的损害，严重的情况下还将导致人身伤害及死亡和（或）保修无效不当安装,错误使用及应用,或其他未照安装说明或警告造成之失败有可能导致产品功能不良,财产损失,严重身体伤害或死亡。

所有其他商标均为其各自所有者的财产。

nVent 保留其更改规格的权利，恕不另行通知。

ERICO-DS-E 789S-E 620LT 09ASCH-CH-1805我们强大的品牌组合:CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
/ERICO | 1。

PIC18F2525_05中文资料

PIC18F2525_05中⽂资料2005 Microchip Technology Inc.DS80222B-page 1PIC18F2525/2620/4525/4620Clarifications/Corrections to the Data Sheet:In the Device Data Sheet (DS39626B ), the following clarifications and corrections should be noted. Any silicon issues related to the PIC18F2525/2620/4525/4620 devices will be reported in a separate silicon errata. Please check the Microchip web site for any existing issues.1.Module:I/O PortsThe TRIS setting for the TX pin on PORTC in T able 10-5 of the Device Data Sheet was incorrectly stated as ‘1’.The correct TRIS setting for the TX pin on PORTC is ‘0’.2.Module:ResetsThe PR2 initialization condition shown in Table 4-4RESET Instruction,Stack Resets and Wake-up via WDT or Interrupt should read “uuuu uuuu ” as shown in the following table (changes are shown in bold text):3.Module:Voltage-Frequency GraphThe title information for Figure 26-2: Voltage-Frequency Graph (Extended), references the wrong device family and has been changed to read as follows:FIGURE 26-2:PIC18F2525/2620/4525/4620 VOLTAGE-FREQUENCY GRAPH (EXTENDED)TABLE 4-4:INITIALIZATION CONDITIONS FOR ALL REGISTERSRegisterApplicable DevicesPower-on Reset,Brown-out Reset MCLR Resets,WDT Reset,RESET Instruction,Stack ResetsWake-up via WDT or Interrupt PR225252620452546201111 1111uuuu uuuuuuuu uuuuLegend:u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.Shaded cells indicate conditions do not apply for the designated device.PIC18F2525/2620/4525/4620 Data Sheet ErrataPIC18F2525/2620/4525/4620DS80222B-page 2? 2005 Microchip Technology Inc.4.Module:DC CharacteristicsIn Section 26.3 “DC Characteristics” (page 336),the specifications for V IL parameters D033B and D034 have been clarified and now read as follows:5.Module:A/D Converter CharacteristicsIn Table 26-24: A/D Converter Characteristics (page 359), specification A40 has been added:TABLE 26-24:A/D CONVERTER CHARACTERISTICS:PIC18FX525/X620 (INDUSTRIAL, EXTENDED)PIC18LFX525/X620 (INDUSTRIAL)6.Module:Instruction SetIn Table 24-2: PIC18FXXXX Instruction Set (pages 270-271), the ADDWF , ADDWFC and BTG instructions have been modified. The changes are shown in bold text:26.3DC Characteristics:PIC18F2525/2620/4525/4620 (Industrial, Extended)PIC18LF2525/2620/4525/4620 (Industrial)DC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)Operating temperature -40°C ≤ T A ≤+85°C for industrialParamNo.Symbol CharacteristicMinMaxUnitsConditionsV ILInput Low Voltage D033B D034OSC1T13CKIV SS V SS0.30.3V VXT, LP modesParamNo.Symbol CharacteristicMin Typ Max Units Conditions A40I ADA/D Current from V DD PIC18FXXXX—180—µA Average current during conversionPIC18LFXX20—90—µATABLE 26-25:PIC18FXXXX INSTRUCTION SETMnemonic,OperandsDescriptionCycles16-Bit Instruction WordStatus AffectedNotesMSbLSbBYTE-ORIENTED OPERATIONS ADDWF ADDWFC f, d, a f, d, a Add WREG and fAdd WREG and Carry bit to f 110010001001da 00da ffff ffff ffff ffff C, DC, Z, OV, N C, DC, Z, OV, N 1, 21, 2BIT-ORIENTED OPERATIONSBTG f, b , aBit Toggle f10111bbbaffffffff None1, 2Note 1:When a Port register is modified as a function of itself (e.g., MOVF PORTB, 1, 0), the value used will be that value present on the pins themselves. For example, if the data latch is ‘1’ for a pin configured as input and is driven low by an external device, the data will be written back with a ‘0’.2:If this instruction is executed on the TMR0 register (and where applicable, ‘d’ = 1), the prescaler will be cleared if assigned. PIC18F2525/2620/4525/4620 7.Module:Timing Diagrams andSpecificationsTable 26-6: External Clock Timing Requirements(page 343), has been revised (changes andadditions are shown in bold text).TABLE 26-6:EXTERNAL CLOCK TIMING REQUIREMENTS8.Module:EUSARTThe RX pin sampling information in Section 18.1.2“Sampling” has changed. This section now reads as follows:18.1.2SAMPLINGThe data on the RX pin is sampled three times by a majority detect circuit to determine if a high or a low level is present at the RX pin when SYNC is clear or when BRG16 and BRGH are both not set.The data on the RX pin is sampled once when SYNC is set or when BRGH16 and BRGH are both set.9.Module:MSSPIn Section 17.3.2 “Operation”, the following note has been added:10.Module:QFNIn the QFN pin diagram on page 3 and in Table1-3: PIC18F4525/4620 Pinout I/O Descriptions, the following note has been added: Note:It is recommended to connect the bottom pad of QFN package parts to V SS.Param.No.Symbol Characteristic Min Max Units Conditions1A F OSC External CLKI Frequency(1)DC1MHz XT, RC Oscillator modeDC25MHz HS Oscillator modeDC31.25kHz LP Oscillator modeDC40MHz EC Oscillator modeOscillator Frequency(1)DC4MHz RC Oscillator mode0.14MHz XT Oscillator mode425MHz HS Oscillator mode410MHz HS + PLL Oscillator mode5200kHz LP Oscillator mode1T OSC External CLKI Period(1)1000—ns XT, RC Oscillator mode40—ns HS Oscillator mode32—µs LP Oscillator mode25—ns EC Oscillator modeOscillator Period(1)250—ns RC Oscillator mode2501µs XT Oscillator mode40250ns HS Oscillator mode100250ns HS + PLL Oscillator mode5200µs LP Oscillator modeNote1:Instruction cycle period (T CY) equals four times the input oscillator time base period for all configurations except PLL. All specified values are based on characterization data for that particular oscillator type under standard operating conditions with the device executing code. Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current consumption. All devices are tested to operate at “min.” values with an external clock applied to the OSC1/CLKI pin. When an external clockinput is used, the “max.” cycle time limit is “DC” (no clock) for all devices.Note:The SSPBUF register cannot be used withread-modify-write instructions, such asBCF, BTFSC, COMF, etc.2005 Microchip Technology Inc.DS80222B-page 3PIC18F2525/2620/4525/4620DS80222B-page 4? 2005 Microchip Technology Inc.11.Module:Electrical CharacteristicsParameters D031A and D041A have been added to Section 26-3 “DC Characteristics”, as shown below:12.Module:Electrical CharacteristicsIn Table 26-1: Memory Programming Require-ments, parameters D132, D132A, D133 and D133A have been changed. The changes are shown in bold :TABLE 26-1:MEMORY PROGRAMMING REQUIREMENTS13.Module:Pinout I/O DescriptionsThe QFN column has been removed from T able 1-2:PIC18F2525/2620 Pinout I/O Descriptions.The PIC18F2525/2620 devices are not available in a QFN package.26.3DC Characteristics:PIC18F2525/2620/4525/4620 (Industrial)PIC18LF2525/2620/4525/4620 (Industrial)DC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)Operating temperature -40°C ≤ T A ≤+85°C for industrialParamNo.Symbol CharacteristicMinMaxUnitsConditionsV ILInput Low Voltage I/O ports:D031Awith SMBus bufferV SS0.8VV IHInput High Voltage I/O ports:D041Awith SMBus buffer2.1V DDVDC CHARACTERISTICS Standard Operating Conditions (unless otherwise stated)Operating temperature -40°C ≤ T A ≤+85°C for industrialParam No.SymCharacteristicMinTyp?MaxUnitsConditionsProgram Flash MemoryD132V IE V DD for Block Erase3.0— 5.5V Using ICSP? port, 25°C D132A V IW V DD for Externally Timed Erase or Write4.5—5.5V Using ICSP port, 25°C D133T IEICSP Block Erase Cycle Time —4—ms V DD ≥ 4.5V D133A T IW ICSP Erase or Write Cycle Time (externally timed) 1——ms V DD ≥ 4.5V, 25°CD133A T IWSelf-Timed Write Cycle Time—2—msPIC18F2525/2620/4525/4620REVISION HISTORYRev A Document (01/2005)First revision of this document.Data Sheet Clarification issues 1 (I/O Ports),2(Resets), 3 (Voltage-Frequency Graph), 4 (DCCharacteristics), 5 (A/D Converter Characteristics),6(Instruction Set) and 7 (Timing Diagrams andSpecifications).Rev B Document (09/2005)Added Data Sheet Clarification issues 8 (EUSART), 9(MSSP), 10 (QFN), 11-12 (Electrical Characteristics)and 13 (Pinout I/O Descriptions).2005 Microchip Technology Inc.DS80222B-page 5PIC18F2525/2620/4525/4620NOTES:DS80222B-page 6? 2005 Microchip Technology Inc.2005 Microchip Technology Inc.DS80222B-page 7Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with yourspecifications.MICROCHIP MAKES NO REPRESENTATIONS OR WAR-RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,WRITTEN OR ORAL, STATUTORY OR OTHERWISE,REL ATED TO THE INFORMATION, INCL UDING BUT NOT L IMITED TO ITS CONDITION, QUAL ITY , PERFORMANCE,MERCHANTABI LITY OR FITNESS FOR PURPOSE .Microchip disclaims all liability arising from this information and its use. Use of Microchip’s products as critical components in life support systems is not authorized except with express written approval by Microchip. No licenses are conveyed,implicitly or otherwise, under any Microchip intellectual property rights.TrademarksThe Microchip name and logo, the Microchip logo, Accuron, dsPIC, K EE L OQ , micro ID , MPLAB, PIC, PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and SmartShunt areregistered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.AmpLab, FilterLab, Migratable Memory, MXDEV, MXLAB, PICMASTER, SEEVAL, SmartSensor and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A.Analog-for-the-Digital Age, Application Maestro, dsPICDEM,/doc/e4ada243e45c3b3567ec8bce.html , dsPICworks, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit SerialProgramming, ICSP , ICEPIC, Linear Active Thermistor, MPASM, MPLIB, MPLINK, MPSIM, PICkit, PICDEM,/doc/e4ada243e45c3b3567ec8bce.html , PICLAB, PICtail, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance and WiperLock are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.SQTP is a service mark of Microchip Technology Incorporated in the U.S.A.All other trademarks mentioned herein are property of their respective companies.2005, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved.Printed on recycled paper.Note the following details of the code protection feature on Microchip devices:?Microchip products meet the specification contained in their particular Microchip Data Sheet.Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions.There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.Microchip is willing to work with the customer who is concerned about the integrity of their code.Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.”Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.Microchip received ISO/TS-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona and Mountain View, California in October 2003. The Company’s quality system processes andprocedures are for its PICmicro ? 8-bit MCUs, K EE L OQ ? code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified.AMERICASCorporate Office2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200Fax: 480-792-7277 Technical Support:/doc/e4ada243e45c3b3567ec8bce.html Web Address:/doc/e4ada243e45c3b3567ec8bce.html AtlantaAlpharetta, GATel: 770-640-0034Fax: 770-640-0307BostonWestborough, MATel: 774-760-0087Fax: 774-760-0088 ChicagoItasca, ILTel: 630-285-0071Fax: 630-285-0075DallasAddison, TXTel: 972-818-7423Fax: 972-818-2924DetroitFarmington Hills, MITel: 248-538-2250Fax: 248-538-2260 Kokomo Kokomo, INTel: 765-864-8360Fax: 765-864-8387Los AngelesMission Viejo, CATel: 949-462-9523Fax: 949-462-9608San JoseMountain View, CATel: 650-215-1444Fax: 650-961-0286 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699Fax: 905-673-6509ASIA/PACIFICAustralia - SydneyTel: 61-2-9868-6733Fax: 61-2-9868-6755China - BeijingTel: 86-10-8528-2100Fax: 86-10-8528-2104 China - ChengduTel: 86-28-8676-6200Fax: 86-28-8676-6599 China - FuzhouTel: 86-591-8750-3506 Fax: 86-591-8750-3521 China - Hong Kong SAR Tel: 852-2401-1200Fax: 852-2401-3431China - QingdaoTel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - ShanghaiTel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 China - ShundeTel: 86-757-2839-5507 Fax: 86-757-2839-5571 China - WuhanTel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - XianTel: 86-29-8833-7250 Fax: 86-29-8833-7256 ASIA/PACIFICIndia - Bangalore Tel: 91-80-2229-0061 Fax: 91-80-2229-0062 India - New Delhi Tel: 91-11-5160-8631 Fax: 91-11-5160-8632 India - PuneTel: 91-20-2566-1512 Fax: 91-20-2566-1513 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Korea - GumiTel: 82-54-473-4301 Fax: 82-54-473-4302 Korea - SeoulTel: 82-2-554-7200Fax: 82-2-558-5932 or 82-2-558-5934 Malaysia - Penang Tel: 604-646-8870 Fax: 604-646-5086 Philippines - Manila Tel: 632-634-9065 Fax: 632-634-9069 SingaporeTel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-572-9526 Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - TaipeiTel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 EUROPEAustria - WeisTel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - ParisTel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Munich Tel: 49-89-627-144-0Fax: 49-89-627-144-44Italy - MilanTel: 39-0331-742611Fax: 39-0331-466781Netherlands - DrunenTel: 31-416-690399Fax: 31-416-690340Spain - MadridTel: 34-91-352-30-52Fax: 34-91-352-11-47UK - WokinghamTel: 44-118-921-5869Fax: 44-118-921-5820 W ORLDWIDE S ALES AND S ERVICE 08/24/05DS80222B-page 8? 2005 Microchip Technology Inc.。

欧普诺OPN-E(UF-01)说明书

欧普诺OPN-E(UF-01)说明书
过滤精度：0.01微米
适用范围：家庭厨房用水净化
产品特色：进口食品级304#不锈钢外壳GPAN超滤膜
净化工艺：GPAN超滤膜+KDF53
进口食品级304#不锈钢外壳GPAN超滤膜出水水质优于国标《生活饮用水卫生标准》(GB574902006)
出水水质洁净安全
采用高精度超滤膜分离技术，纯物理筛分，有效滤除水中的悬浮物。

细菌、病毒、胶体、大分子有机物等有害杂质，同时保留水中原有的矿物质和微量元素。

净芯超滤，无二次污染，滤芯更耐用
超滤膜配方采用食品级改性PAN，不添加含铅稳定剂，亲水性好，不产生二次污染。

镜面制膜工艺，膜丝表面光洁度高，不易积累污染物易于清洗。

持久耐压，安全可靠，无后顾之忧
机身外壳采用高抗压304不锈钢，采用一体冷压成型，两端无焊缝设计，双挡板端封。

通过20万次(国标为10万次)动态水锤压力测试。

第1页共1页。

五光彩电子科技有限公司-Eaton PDG53P1200E2NM电容保护电源保护筒说明书

Eaton PDG53P1200E2NMEaton Power Defense molded case circuit breaker, Globally Rated, Frame 5, Three Pole, 1200A, 100kA/480V, PXR20 LSI TU, No Terminals (Metric Tapped Conductors)Eaton Power Defense molded case circuit breakerPDG53P1200E2NM 786679780046139.7 mm 406.4 mm 209.5 mm 21.32 kg Eaton Selling Policy 25-000, one (1) year from the date of installation of theProduct or eighteen (18) months from thedate of shipment of the Product,whichever occurs first.RoHS Compliant CCC MarkedCSAUL 489IEC 60947-2Product NameCatalog Number UPCProduct Length/Depth Product Height Product Width Product Weight WarrantyCompliancesCertifications1200 AComplete breaker 5Three-polePD5 Global Class A PXR 20 LSI600 Vac600 VNo Terminals100 kAIC at 480 Vac 65 kAIC @600/347V (UL)40 kAIC Icu/ 25 kAIC Ics/ 84 kAIC Icm @525V South Africa (IEC)85 kAIC Icu/ 40 kAIC Ics/ 187 kAIC Icm @480V Brazil (IEC) 200 kAIC @240V (UL)200 kAIC Icu/ 150 kAIC Ics/ 440 kAIC Icm @240V (IEC) 100 kAIC Icu/ 50 kAIC Ics/ 220 kAIC Icm @380-415V (IEC) 100 kAIC @480/277V (UL)35 kAIC Icu/ 18 kAIC Ics/ 73.5 kAIC Icm @690V (IEC) 100 kAIC Icu/ 50 kAIC Ics/ 220 kAIC Icm @440V (IEC)1200 AEaton Power Defense PDG53P1200E2NM 3D drawing Consulting application guide - molded case circuit breakersAmperage Rating Circuit breaker frame type Frame Number of poles Circuit breaker type Class Trip Type Voltage rating Voltage rating - max Terminals Interrupt rating Interrupt rating range Trip rating 3D CAD drawing packageApplication notesPower Xpert Protection Manager x32Power Xpert Protection Manager x64BrochuresStrandAble terminals product aidPower Defense molded case circuit breaker selection posterPower Defense brochurePower Defense technical selling bookletCatalogsPower Defense molded case circuit breakers - Frame 5 product aid Power Xpert Release trip units for Power Defense molded case circuit breakersMolded case circuit breakers catalogCertification reportsPDG5 CCC certificationPDG6 CSA certificationPDG6 CCC certificatePDG5 CSA CertificationPDG5 UL authorizationPDG5 CB reportPower Defense Declaration concerning California’s Proposition 65EU Declaration of Conformity - Power Defense molded case circuit breakersInstallation instructionsPower Defense Frame 5 vertical padlockable handle lock hasp installation instructions - IL012283ENPower Defense Frame 2/3/4/5/6 voltage neutral sensor module wiring instructions – IL012316ENPower Defense Frame 5 walking beam installation instructions -IL012290ENPower Defense Frame 5 key interlock installation instructions -IL012294ENPower Defense Frame 5 aux, alarm, shunt trip and uvr instructions(IL012201EN).pdfPower Defense Frame 4_5 flex shaft handle mech assembly instructions - IL012284ENPower Defense Frame 5 breaker status module installation instructions – IL012307ENPower Defense Frame 5 interphase barrier kit 3 pole installation instructions - IL012293ENPower Defense Frame 4_5_6 high performance flex shaft handle mech assembly instructions - IL012296ENInstallation videosPower Defense Frame 5 Shunt Trip, Aux and Alarm Trip How-To Video Power Defense Frame 5 Aux, Alarm, ST and UVR Animated Instructions.rh1Power Defense Frame 5 Trip Unit Upgrade Relays Board, Animated Instructions.rhPower Defense Frame 5 Trip Unit Replacement Animated Instructions Power Defense Frame 5 UVR Trip How-To VideoPower Defense Frame 5 Trip Unit Upgrade Wire Harnesses, Animated Instructions.rhMultimediaPower Defense Frame 5 Trip Unit How-To VideoPower Defense BreakersEaton Power Defense for superior arc flash safetyPower Defense Frame 6 Trip Unit How-To VideoPower Defense Frame 3 Variable Depth Rotary Handle Mechanism Installation How-To VideoPower Defense molded case circuit breakersPower Defense Frame 2 Variable Depth Rotary Handle Mechanism Installation How-To VideoSpecifications and datasheetsEaton Specification Sheet - PDG53P1200E2NMTime/current curvesPower Defense time current curve Frame 5 - PD5White papersMaking a better machineSingle and double break MCCB performance revisitedMolded case and low-voltage power circuit breaker healthIntelligent power starts with accurate, actionable dataIntelligent circuit protection yields space savingsImplementation of arc flash mitigating solutions at industrial manufacturing facilitiesMolded case and low-voltage breaker healthSafer by design: arc energy reduction techniquesEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia。

《哮喘药物治疗学》(中文翻译版)_

lmona
r
i
br
o
s
i
sandemphys
ema as
t
ema
t
i
cr
ev
i
ewand
pu
yf
ys
10 1371j
our
na
lpone0161437
Po
r
t
i
l
l
oK Pe
r
e
z
-Roda
sN Ga
r
c
i
a
-Ol
i
veI e
ta
l Lungc
anc
e
r
i
npa
t
i
en
t
swi
t
hc
omb
i
nedpu
sp
i
r Med 2016 117 14
26 DOI
9
10
10 1016jrmed 2016 05 005
MaB Kang MJ Le
eCG e
ta
l Ro
l
eo
fCCR5i
nIFNgamma
i
nduc
edandc
i
r
e
t
t
esmoke
i
nduc
edemphys
ema J JC
l
i
n
ga
lmona
r
的药物治疗。该书在对哮喘全方位药物治疗原则进行回顾的同时,还对哮喘药物的药理学
和临床应用进行了系统阐述,提供了主要针对门诊患者的最佳哮喘药物治疗的可行性方

有机物中英文对照表

编号中文名称英文名称CAS 1甘油（丙三醇）Glycerine2ε-己内酯单体ε-Caprolactone3聚已内酯（1000-100000分子量）Poycaprolactone4甲基丙烯酸缩水甘油酯（GMA)Glycidyl Methacrylat5己二胺Hexamethylene Diamine Anhydre 6二甲基氨基丙胺（DMAP A)Dimethylaminopropylamine7二乙基氨基丙胺（DEAPAN,N-二乙基-1，3-丙二胺）Diethylaminopropylamin8二甲基苄基胺Dimethylbenzylamine9二乙氨基乙胺（N,N-二乙基乙二胺）Diethylaminoethylamine10氨乙基乙醇胺（N-ß-羟乙基二胺）N-(2-Aminoethyl)11聚/单碳化二亚胺Stabaxol PBT抗水解母粒12一乙醇胺(MEOA)通用/电子级Ethanolamine13二乙醇胺Diethanolamine14三乙醇胺Triethanolamine15己内酰胺Hexanolactam16壬基酚Neyl phenol17四氢呋喃(THF)Tetrahydrofuran18环氧氯丙烷Chloropropylene oxide19二羟甲基丙酸Dihydroxyl methyl propaniocacid20N-甲基吡咯酮N-Methy1-2-Pyrrolidine21乙二胺Ethylene diamine22二乙烯三胺Diethylene tramine23异佛尔酮二胺Isophorone Diamine24叔丁胺Tert-Butylamine25咪唑Imidazole26间苯二酚m-Dihydroxybenzene27聚四氢呋喃醚PTMG282-（2-氨基乙氧基）乙醇2-（2-Aminoethoxy)ethanol (DGA)929-06-6又名：二甘醇胺29正辛酸Caprylic Acid30正己酸n-Hexanoic Acid31正戊酸V alproic Acid32正庚酸n-Heptanoic Acid33正癸酸Decanoic acid34正己烷n-Hexane351，3-丙二醇1,3-Propylene glycol361，3-丁二醇1,3-Butylene glycol37正十二烷基硫醇（NDM)normal-Dodecy1 Mercaptan38叔十二烷基硫醇（TDM)tert-Dodecyl Mercaptan39氯化硫酰（硫酰氯）Sulphuryl chloride40多醚胺（聚醚胺）Polyetheramine41甲苯二胺Meta TDA 2,4 79-81/2,6 19-21 421，3-丙二胺1,3-Diaminopropane43四甲基丙二胺TetraMethylPropyleneDiAmine44烯丙基缩水甘油醚106-92-3Allyl glycidyl ether 106-92-345十四酸Myristic acid46正丙酸n-Propyl alcohol47正丁酸n-Butyl alcohol48二甲基甲酰胺DMF49纯吡啶Pure Pyridine50环戊胺Cyclopentylamine51正丁酸n-Butyric Acid52异丁酸Isobutyric Acid53正丁醚n-Butylether542-戊酮2-Pentanone553-戊酮3-Pentanone56环戊酮Cyclopentanone57甲基异丙基酮Methyl Isopropy Ketone58仲丁胺(B2A) sec-ButylAmine59二乙氨基乙胺Diethylaminoethylamine60甲基丙烯酸缩水甘油酯Glycidyl Methacrylat61二氮杂双环十一碳烯1,8-Diazabicyclo(5,4,0)undec-7-ene623-（N-对四苯磺酰基-L-丙氨酰氧基）-5-苯基吡咯3-（N-tosyl-L-alaninyloxy)-5-phenylpyrrole63四甲基丙二胺TetraMethyPropyleneDiAmine 64单烯丙胺Allylamine65二烯丙胺Diallylamine66三烯丙胺Triallylamine67甲基丙烯酸叔丁酯TBMA68甲基丙烯酸月桂酯LMA69甲基丙烯酸硬脂酸酯SMA70甲基丙烯酸二甲基氨基乙酯DMA EMA71异氰尿酸三缩水甘油酯TGIC72甲基丙烯酸镁Magnesium methylacrylate73盐酸氯苯胍1,3-双［(对氯亚苄基)氨基］胍盐酸盐1,3-Bis［(P-cnioyoptnxylidene)amino ］guenidinehydyochloyide74二氨基胍盐酸盐75烯丙基缩水甘油醚Allyl glycidyl ether106-92-3 76乙酰基吗啉 1 4-Acetylmorphline1696-20-4 77氮-(2-乙氨基)-1,3-丙二胺N-(2-Aminoethyl)-1,3-propanediamine13531-52-7 78N,N- 双丙氨基乙烯基二胺N4-Amin (N,N'-Bis(3-aminopropyl)ethylenediamin10563-26-5 79氨基乙醇MEA Monoethanolamine141-43-5 802-（2-氨基乙氧基）乙醇2-(2-Aminoethoxy)ethanol929-06-6 81乙氨基乙醇基胺Aminoethylethanolamin111-41-1 822-吗啉基乙胺2-Morpholinoethylamine2038-3-1 83N-(2-乙氨基)哌嗪N-(2-Aminoethyl)piperazin140-31-8 845-氨基戊醇5-Aminopentanol2508-29-4 853-氨基-1-丙醇3-Amino-1-propanol156-87-6 86N,N-双（3-丙氨基）甲胺N,N-Bis(3-aminopropyl)methylamine105-83-9 87苯胺Aniline62-53-388苄胺Benzylamine100-46-9 89双（2- 甲基乙氨基）醚Bis(2-dimethylaminoethyl)ether3033-62-3 90N,N-双-（2-羟基乙基）-间甲苯胺N,N-bis-(2-hydroxyethyl)-m-toluidine91-99-6 913,3-(丁基-1,4-双氧基)双丙胺3,3'-(Butane-1,4-diylbis(oxy))bispropanamine7300-34-7 92丁胺(MNBA)Butylamine109-73-9 932-丁胺(B2A)sec-Butylamine13952-84-6 94叔丁胺tert-Butylamine75-64-9952,2-丁基亚氨基二乙醇2,2'-Butyliminodiethanol102-79-4 962-丁基氨基乙醇2-Butylaminoethanol111-75-1 97N-可可吗啉N-Cocoporpholine983-吗啉丙腈3-Morphlinepropiononitrile4542-47-6 99环己胺CHA Cyclohexylamine108-91-8 1003-环己胺基丙胺3-Cyclohexylaminopropylamine3312-60-5 101环戊胺Cyclopentylamine1003-03-81024,4-二氨基二环己基甲烷PACM204,4-diaminodicyclohexylmethane1761-71-31034,4-二氨基二苯基甲烷4,4'-Diaminodiphenylmethane101-77-91041,8-二氮杂环十一烯DBU1,8-Diazabicyclo(5.4.0)undec-7-ene6674-22-2105二丁基胺Dibutylamine111-92-2 1062-二丁胺基乙醇2-Dibutylaminoethanol102-81-8 107二环己基胺DCHA Dicyclohexylamine101-83-7 108二乙醇胺DEA Diethanolamine111-42-2 109二乙胺Diethylamine109-89-7 1104-氨基戊基二乙胺4-Aminopentyldiethylamine140-80-71112-氨基乙烷基双乙胺2-Aminoethyldiethylamine100-36-71123-(二乙氨基)丙胺(DEAPA)3-(Diethylamino)propylamine104-78-9113N,N-二乙基-N,N-二甲基-1，3-丙二烷N,N-Diethyl-N',N'-dimethylpropane-1,3-diamine62478-82-4114N-(2-氨基乙基)-1,2-乙二胺N-(2-Aminoethyl)-1,2-ethanediamine111-40-01152-二乙胺基乙醇2-Diethylaminoethanol100-37-8 116双(2-乙基己基)胺Bis(2-ethylhexyl)amine106-20-7 117二己基胺Dihexylamine143-16-81182,2-(苯基亚氨基)二乙醇2,2'-(Phenylimino)diethanol120-07-01191,1-氨基二异丙醇1,1'-Iminodipropan-2-ol110-97-4120二-(2-甲氧基乙基)胺Bis(2-methoxyethyl)amine111-95-5121二甲胺Dimethylamine124-40-3122N,N-二甲基辛/十八胺N,N-Dimethyl-C8/C18-amine84649-83-2123N,N- 二甲基十二/十四胺N,N-Dimethyl-C12/C14-amine84649-84-3124N,N-二甲基乙胺基乙二醇2-(2-(Dimethylamino)ethoxy)ethanol1704-62-71253-二甲基氨基-1-丙醇3-Dimethylaminopropan-1-ol3179-63-31263-二甲基氨基丙胺DMAP A3-Aminopropyldimethylamine109-55-7127双-(3-二甲基丙胺基)胺TMBP ABis(3-dimethylaminopropyl)amine6711-48-4128N,N-二甲基苯胺N,N-Dimethylaniline121-69-7 129N,N-二甲基苄胺Benzyldimethylamine103-83-3 130二甲基丁胺N,N-Dimethylbutylamine927-62-8131二甲基环己胺DMCHACyclohexyldimethylamine98-94-21322,2-二甲基-4,4-二氨基-二环己基甲烷2,2'-Dimethyl-4,4'methylenebis(cyclohexylamine)6864-37-5133N,N-二甲基二丙基三胺N'-(3-Aminopropyl)-N,N-dimethylpropane-1,3-diamine10563-29-8134二甲基乙醇胺DMEA2-Dimethylaminoethanol108-01-0135二甲基乙基胺Ethyldimethylamine598-56-1136N,N-二甲基异丙醇胺N,N-Dimethylisopropanolamin108-16-7137二甲基异丙胺(DMIPA)N,N-Dimethylisopropylamine996-35-01382,6-二甲基吗啉2,6-Dimethylmorpholine141-91-3 1391,4-二甲基哌嗪1,4-Dimethylpiperazine106-58-1 1401,4-二甲基吡唑1,4-Dimethylpyrazole1072-68-0 141二丙基胺Dipropylamine142-84-7 142二丙基三胺3,3'-Iminodi(propylamine)56-18-8 143二（十三胺）Ditridecylamine101012-97-9 1442-乙氧基乙胺2-Ethoxyethylamine110-76-9 1453-乙氧基丙胺3-Ethoxypropylamine6291-85-6 146乙胺MEA Ethylamine1975-4-7147N-乙基苯胺N-Ethylaniline103-69-5 148乙基丁胺EBA Ethylbutylamine13360-63-9 149N-乙基环己胺Cyclohexyl(ethyl)amine5459-93-8150N-乙基-1,2-二甲基丙胺EDMPAN-ethyl-1,2-dimethyl-propylamine2738-6-9151乙二胺Ethylenediamine107-15-3 152N-乙基乙醇胺2-Ethylaminoethanol110-73-61533-(2-乙基己氧基）丙胺3-(2-Ethylhexyloxy)propylamine5397-31-91542-乙基己胺2-Ethylhexylamine104-75-6155N-乙基-N-(2-羟乙基)苯胺2-(N-Ethylanilino)ethanol92-50-2156N-乙基-N-(2-羟乙基)-间苄胺N-Ethyl-N-(2-hydroxyethyl)-m-toluidine91-88-3157N-乙基吗啉NEM4-Ethylmorphline100-74-3 158N-乙基-邻苄胺N-Ethyl-o-toluidine94-68-8 159N- 乙基哌嗪1-Ethylpiperazine5308-25-8 160N-乙基哌啶1-Ethylpiperidine766-09-6 161N-甲醛基吗啉4-Morpholinecarbaldehyde4394-85-8 162己二胺Hexamethylenediamine124-09-4 163己胺Hexylamine111-26-21643-((2-羟基乙基)氨基)丙醇3-((2-Hydroxyethyl)amino)propanol19344-29-7165N-(2-羟乙基)苯胺2-Anilinoethanol122-98-5 166N-(2-羟乙基)吗啉2-Morpholinoethanol622-40-2 1671-(2-羟乙基)哌嗪2-Piperazin-1-ylethanol103-76-4 168N-(2-羟乙基)哌啶2-Piperidinoethanol3040-44-6169N-(2-羟乙基)-1,3-丙二胺2-((3-Aminopropyl)amino)ethanol4461-39-6170N-(2-羟丙基)吗啉4-Morphlineethanol2109-66-2 171异佛尔酮二胺Isophorone diamine2855-13-2 172异丙醇胺1-Aminopropan-2-ol8-96-67 173异丙胺(MIPA)Isopropylamine75-31-01743-(2-甲氧基乙氧基)丙胺3-(2-Methoxyethoxy)propylamine54303-31-01752-甲氧基乙胺2-Methoxyethylamine109-85-31763-甲氧基丙胺(MOPA)3-Methoxypropylamine5332-73-0177甲胺(MMA)Methylamine74-89-5 178N-甲基苄胺N-Methylbenzylamine103-67-3 179N-甲基环己胺Cyclohexyl(methyl)amine100-60-7180N-甲基二乙醇胺MDEA2,2'-Methyliminodiethanol105-59-9181N-甲基乙醇胺MMEA2-Methylaminoethanol109-83-1182N-甲基吗啉NMM4-Methylmorpholine109-02-4183N-甲基-N-氧化吗啉NMMON-Methylmorphline oxide7529-22-8184N-甲基哌嗪1-Methylpiperazine109-01-3 1851-甲基哌啶1-Methylpiperidine626-67-5 186甲基丙二胺3-Aminopropylmethyl-amine6291-84-5 1871-甲基-1-氢-吡咯1-Methylpyrrole96-54-8 1881-甲基吡咯烷1-Methylpyrrolidine120-94-5 189吗啉MOR Morpholine110-91-8 190新戊二胺2,2-Dimethylpropane-1,3-diamine（Neopentandiamin）7328-91-8 191辛胺Octylamine111-86-41922,2-二吗啉基二乙基醚2,2'-Dimorpholinyldiethyl-ether6425-39-4193N,N,N,N,N-五甲基二乙基三胺JEFFCA TPMDETAMethylbis(2-dimethylaminoethyl)-amine3030-47-5194N,N,N,N,N-五甲基二丙基三胺JEFFCA T ZR-40N,N,N',N'',N''-Pentamethyldipropylen-triamin3855-32-1195R-1-苯乙基胺D-alpha-Methylbenzyl-amine3886-69-9 196S-1-苯乙基胺L-alpha-Methylbenzyl-amine2627-86-3 197哌嗪Piperazine110-85-0 198哌啶Piperidine110-89-4 199多醚胺D 2000Polyetheramine D 20009046-10-0 200多醚胺D 400Polyetheramine D 4009046-10-0 201多醚胺D 230Polyetheramine D 2309046-10-0 2021,2-丙二胺Propylenediamine78-90-02031,3-丙二胺Trimethylenediamine109-76-2 204丙胺(MNPA) Propylamine107-10-8 205吡咯烷Pyrrolidine123-75-1206N,N,N,N-四甲基-4,4’-双氨基双环己基甲烷Bis(4-dimethylamino-cyclohexyl) methane13474-64-1207N,N,N,N-四甲基-1,6-己二胺N,N,N',N'-Tetramethylhexamethyl-enediamine111-18-2208邻-甲苯胺o-Toluidine95-53-4 209三丁基胺TNBA Tributylamine102-82-9 210十三胺1-Tridecanamine2869-34-3 211三乙醇胺TEA Triethanolamine102-71-6 212三乙胺Triethylamine121-44-8 213三己胺Trihexylamine102-86-3 214三异丙醇胺1,1',1''-Nitrilotris-2-propanol122-20-3 215三甲胺TMA Trimethylamine75-50-3 216三甲胺盐酸盐Trimethylammonium chloride593-81-72174,7,10-三氧十三烷基-1，13-二胺4,7,10-Trioxatridecan-1,13-diamin4246-51-9218三丙胺Tripropylamine102-69-22191,3,5-三（二甲基丙氨基）-1,3,5-六氢化三嗪N,N',N''-Tris(dimethylaminopropyl) hexahydrotriazine15875-13-5220三-(2-乙基己基)胺2-Ethyl-N,N-bis(2-ethylhexyl) hexylamine1860-26-0 2212,6-二甲苯胺2,6-Xylidine87-62-72223-异丙氧基丙胺（IPOPA）3-Isopropoxypropylamine2906-12-9223二甲基二丙基三胺（DMAP APA）Dimethyldipropylenetri-amine224乙基二异丙胺(EDIPA)N,N'-diisopropylethyl-amine7087-68-5225四甲基丙二胺（TMPDA）N,N,N',N'-Tetramethyl-1,3-propanediamine110-95-2226异丙胺Isopropylamine75-31-0 227正丁胺n-Butylamine109-73-9 228异丁胺(MIBA)Isobutylamine78-81-9229仲丁胺2-Butylamine13952-84-6 2303-甲基丁胺3-Methylbutylamine107-85-7 231正辛胺n-Octylamine2322-乙基己胺2-Ethylhexylamine104-75-6 233异壬胺Isononylamine234丙烯胺Allylamine107-11-9 235呋喃胺Furfurylamine617-89-0 236二甲胺Dimethylamine124-40-3 237N-乙基甲基丙烯胺n-Ethylmethallylamine18328-90-0 238二异丁胺Di-iso-butylamineDIBA110-96-3 239二仲丁胺Di-sec-butylamine626-23-3 240二戊胺Diamylamine2050-92-2 241二正辛胺Di-n-octylamine1120-48-5 242二（2-乙基己基）胺Di-(2-ethylhexyl)-amine106-20-7 243二异壬胺Di-isononylamine244二烯丙胺Diallylamine124-02-7 245三甲胺Trimethylamine75-50-3 246三正辛胺Tri-n-octylamine1116-76-3 247三烯丙胺Triallylamine102-70-5 2483-二甲氨基丙胺3-Dimethylaminopropylamine109-55-7249N,N,-二新丁基乙二胺N,N,-Di-tert-butylethylenedi-amine250糠胺Formamide1975-12-7251N,N’ -二特丁基乙二胺252TCD-二胺253二甲基甲酰胺Dimethyl formamide DMF1968-12-2 254乙胺Ethylamine1975-4-7 255叔丁胺sec-butyl amine75-64-9 256正辛胺1-Aminooctane111-86-4 257三甲胺Trimethylamine75-50-3258N,N-二四丁基乙基二胺N,N'-di-t-Butylethylenediamine4062-60-62591,3-二甲脲1,3-Dimethylurea96-31-1 260二异丙基胺Diisopropylamine108-18-9261二异丁胺Diisobutylamine110-96-3 262氨丁基二甲基缩醛AminobutryaldehydeDimethyl Acetal19060-15-2 263N,N-二乙基环己胺N,N-diethylcycl-ohexylamine91-65-6 2642-甲基环己基胺2-Methylcyclohexylamine7003-32-9 265甲氧基异丙胺Methoxyisopropylimine37143-54-7 266氨丙基吗啉N-aminopropyl-morphline123-00-22671,8-二氨基-3,6二氧辛烷1,8-Diamino-3,6-dioxaoctane929-59-9268N,N-二甲基氨乙基乙二醇N,N-dimethyl-2-(2-aminoethoxy)ethanol1704-62-7269多醚胺JEFFAMINE M-2070270多醚胺JEFFAMINE D-2000271甲基丙基酮2-戊酮2-Pentanone107-87-9 272二乙基酮3-戊酮name 3-Pentanone96-22-0273甲基异丙基酮3-甲基丁酮3-Methyl-2-butanone563-80-4274甲基丁基酮2- 已酮2-Hexanone591-78-6275甲基戊基酮2-庚酮2-Heptanone110-43-0 276乙基丁基酮3-庚酮3-Heptanone106-35-4 277二丙基酮4-庚酮4-Heptanone123-19-3278二异丙基酮2，4-二甲基-3-戊酮2,4-Dimethyl-3-pentanone565-80-0279甲基已基酮2-辛酮2-Octanone111-13-7 280甲基庚基酮2-壬酮2-Nonanone821-55-6281甲基壬基酮2-十一酮2-Undecanone112-12-9282二正戊基酮6-十一酮6-Undecanone927-49-1283环戊酮Cyclopentanone120-92-3 284丙酮2-Propanone67-64-1285苯基丙酮1-苯基-2-丙酮Phenylacetone103-79-7286甲基丙基甲醇2-戊醇2-Pentanol6032-29-7287二乙基甲醇3-3-Pentanol584-02-1戊醇288二异丙基甲醇2，4-二甲基-3-戊醇2,4-Dimethyl-3-pentanol600-36-2289双丙酮醇4-羟基-4-甲基-2-戊酮4-Hydroxy-4-methyl-2-pentanone123-42-2290异丁酸2-甲基丙酸Isobutyric acid79-31-2 291正丁酸丁酸-Butyric acid107-92-6292α-羟基异丁酸2-甲基-2-羟基丙酸2-Hydroxy isobutyric acid594-61-62932-Ethylbutyric acid88-09-5294异丁酸异丁酯2-甲基丙酸异丁酯Isobutyl isobutyrate97-85-8295醇酯-12 2，2，4-三甲基-1，3-戊二醇单异丁酸酯2,2,4-Trimethyl-1,3-pentanediol monoisobutyrate25265-77-4296TPD增塑剂2，2，4-三甲基-1，3-戊二醇二异丁酸酯2,2,4-Trimethyl-1,3-pentanediol Diisobutyrate6846-500-0297丁醚正丁醚n-Butyl ether142-96-1298异丁醛2-甲基丙醛Isobutylaldehyde78-84-2编号中文名称英文名称CAS号12-甲基-6甲氧基喹啉6-Methoxy-2-methyl-quinoline1078-28-022,6-二氯苯酚2,6-Dichloro-phenol87-65-03对氰基苯甲醛4-formylbenzonitrile105-07-742-氯-1-(3,4-二氟苯基)乙酮2-Chloro-1-(3,4-difluorophenyl)ethanone51336-95-952-氟-N-乙酰苯胺N-(2-fluorophenyl)acetamide364-81-86α-溴代乙酸2-bromopropanoic acid96-32-27苯乙酸[4-(acetylamino)phenyl]acetic acid18699-02-083,4-二羟基苯甲醛3,4-dihydroxybenzaldehyde139-85-594-溴苄溴1-bromo-4-(bromomethyl)benzene589-15-110N,N-二甲基β-氯乙胺N-(2-chloroethyl)-N,N-dimethylamine107-99-3113,4,5,6-四氯邻苯二甲腈[2,3,4,5-tetrachloro-6-(cyanomethyl)phenyl]acetonitrile1953-99-7121-(氯乙酰基)-3，4-二氟苯2-chloro-1-(3,4-difluorophenyl)ethanone51336-94-8132-氟乙酸乙酯ethyl 3-fluoropropanoate127306-59-6146-硝基吲哚6-nitro-1H-indole4769-96-415(N-乙酰基)-2-甲基-3溴苯胺N-(3-bromo-2-methylphenyl)acetamide54879-19-516对硝基苯乙酸(4-nitrophenyl)acetic acid830-03-5171,3-二氟苯1,3-difluorobenzene372-18-9182-氟-N-乙酰基苯胺N-(2-fluorophenyl)acetamide399-31-5192-甲硫基苯胺2-(methylthio)aniline2987-53-3202,5-二氯二苯酮(2,5-dichlorophenyl)(phenyl)methanone16611-67-9214-羟甲基苯酚4-(hydroxymethyl)phenol623-05-2224-乙基苯酚4-ethylphenol123-07-923α-氯丙酸乙酯ethyl 2-chloropropanoate535-13-724氯甲基三甲基硅烷(Chloromethyl)trimethylsilane2344-80-1252-硝基苯磺酰氯2-Nitrobenzenesulfonyl chloride1694-92-426乙酮P- Hydroxyacetophenone99-93-4271,6-二溴己烷1,6-Dibromohexane629-03-828对氟硝基苯1-Fluror-4-nitrosobenzene350-46-929三氯甲基苯(Trichloromethyl)benzene98-07-730间三氟甲基苯胺3-(Trifluoromethyl)aniline98-16-8313,5-二氯苯甲酰氯3,5-Dichlorobenzoyl chloride2905-62-6324-氟苯酚4-Fluorophenol371-41-5 331-溴丙酮1-bromoacetone598-31-234醋酸叔丁酯tert-butyl acetate540-88-5352-氧代噁唑烷酮2-Oxazolidone497-25-6361-氯-4-甲氧基苯1-Chloro-4-methoxybenzene623-12-137吡啶-2,6-二甲酸pyridine-2,6-dicarboxylic acid499-83-2382-三氟甲基苯胺2-(trifluoromethyl)aniline88-17-539N-氰基亚胺乙酸甲酯Methyl (1E)-N-cyanoethanimidoate402,4-二硝基-1-二苯醚2,4-Dinitronso-1-phenoxybenzene41二氯海因1,3-Dichloro-5,5-dimethylhydantoin118-52-5 42丁酰氯Butanoyl chloride616-27-3431,4-二氯丁烷1,4-Dichlorobutane110-56-5442,4-二羟基-5-甲基嘧啶Cytosine65-71-445四氯苯醌Tetrachloroquinone118-75-2 46对氟苯胺4-Fluoroaniline371-40-447乙酮1-(2,4-dichlorophenyl)ethanone937-20-2483-甲氧基-2,4,5-三氟苯甲酸2,4,5-trifluoro-3-methoxybenzoic acid112811-65-1493-(3-乙氧基丙二酮基)-2,6-二氯吡啶ethyl-3-(2,6-dichloro-5-fluoropyridin-3-yl)-3-oxopropanoate96568-04-6504-腈基-2-氟苯酚2-fluoro-4-hydroxybenzonitrile82380-18-5512-巯基-5-三氟甲基吡啶5-(trifluoromethyl)pyridine-2-thiol76041-72-0522-氟-4-溴-甲苯4-bromo-2-fluoro-1-methylbenzene51436-99-8532-(2-噻吩基)乙胺2-thiophen-2-yl-ethylamine30433-91-1543-p-tolyloxy-benzoic acid724-98-155对(2-甲氧基乙基)苯酚4-(2-methoxyethyl)phenol56718-71-956N-(1,1-二甲基丙炔基)-3,5-二氯苯甲酰胺3,5-Dichloro-N-(1,1-dimethylpropynyl)-benzamide23950-58-5573-胺基-1-(2，4，6-三氯苯基)咪唑-5-酮3-Amino-1-(2,4,6-Trichlorophenyl)pyrazolin-5-one027241-31-2582,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9-hexadecafluorononan-1-ol376-18-1592-氟-4-溴苄溴2-fluoro-4-bromobenzylbromide76283-09-5606-氯烟酸6-Chloronicotinic Acid5326-23-8614-三氯甲基吡啶4-Trichloromethylpyridine22796-40-3622-氯-3-甲基吡嗪2-Chloro-3-methylpyrazine95-58-963-2,4-二甲基噻唑5-Acetyl -2,4-dimethylthiazole38205-60-664三氟甲磺酸Trifluoromethanesulfonic acid1493-13-6652,3,4-三氟苯甲酸2,3,4-Trifluorobenzoic acid61079-72-966对叔丁基苯甲腈4-tert-butylbenzonitrile4210-32-6671,3-二(氯甲基)-1,1,3,3-四甲基二硅醚1,3-Bis(chloromethyl)-1,1,3,3-tetramethyldisiloxane2362-10-9684-叔丁基苯乙腈4-Tertbutylbenzonitrile20651-73-4693-氯-2,4,5-三氟苯甲酸3-Chloro-2,4,5-trifluorobenzoic acid101513-77-3701,1,1,3,3-五氯丙酮1,1,1,3,3-Pentachloro-propan-2-one1768-31-6712-氯-1,4-二甲基苯2-Chloro-1,4-dimethylbenzene95-66-9724-溴-2-氯氟苯4-Bromo-2-chloro-fluorobenzene60811-21-4734-溴-2-氟苯胺4-Bromo-2-fluoroaniline367-24-8744-溴-3-三氟甲基苯胺4-Nitro-3-(trifluoromethyl)aniline393-11-3752,3,6-三溴-4-甲基苯酚2,3,6-Tribromo-4-methylphenol36776-51-976α-溴-α-苯甲酰基甲苯α-Bromo-α-benzoyltoluene1484-50-0775-氯戊酰氯5-Chloropentanoyl chloride1575-61-7 782-丁基吡嗪2-butylpyrazine32741-11-0 792-氨基-3,3-2-Amino-3, 3-dimethylbutanoic acid471-50-1酸802,2,2-三氯乙醇2,2,2-Trichloroethanol115-20-881三异丙基氯硅烷Chlorotripropylsilane995-25-582(S)-(+)-4-苯基-2-恶唑烷酮(S)-(+)-4-phenyl-2-oxazolidinone99395-88-783(R)-(-)-4-苯基-2-恶唑烷酮(R)-(-)-4-phenyl-2-oxazolidinone90319-52-1842-(2`-Hydroxy-5'-(α-methacryloxyethylphenyl))-benzotriazole 851-Cyclohexyl-5- (4-methoxybutyl)-1H-tetrazole865-allyl-2-hydroxy-N-(2-hydroxyethyl)-3-methoxy-benzamide872-丁基-4-甲基咪唑2-butyl-5-methyl-1H-imidazole884-氯-2-（二羟基甲硼烷基）-N-叔丁酰基苯胺N-(4-chloro-2-dihydroxyboronyl-phenyl)-propionamide894-(2-硝基乙烯基)苯酚乙酸酯4-[(Z)-2-nitrovinyl] phenyl acetate90N-氰基亚胺丙酸甲酯Methyl (1Z)-N- cyanopropanimidoate91N-特戊酰基-3,4-二氟苯胺N-(3,4-difluorophenyl)-2,2-dimethylpropanamide922,3,4-三氟溴苯1-bromo-2, 3,4-trifluorobenzene93N-(对叔丁氧基苯乙基)邻苯二甲酰亚胺2-[2-(4-tert-butoxyphenyl) ethyl]-1H-isoindole-1,3(2H)-dione941-(2,6-二氟苯基)丙酮1-(2,6-difluorophenyl) acetone95基苯氧基)苯氧基)苯胺3-[3-(3-aminophenoxy) phenoxy] aniline964-溴-2-氟苄胺1-(4-bromo-2-fluorophenyl) methanamine97N-（β-氯乙酰基）-4-甲氧基苯胺3-chloro-N-(4-methoxyphenyl)propanamide984-甲硫基-2-（二羟基硼烷基）苯胺1-methylsulfuanyl-2-dihydroxyboronylphenylamine99N-(2,3,4-三氟-6-硝基苯)乙酰胺N- (2,3,4-trifluoro-6-nitrophenyl) acetamide1002-氯-5-三氯甲基吡啶2-Chloro-5-Trichloromethyl pyridine101N-(2,3,4-三氟苯基)乙酰胺N-(2,3,4-trifluorophenyl)acetamide102反式4-(4'-溴-2'-氟苯基)-3-烯-丁酮-24-(4-Bromo-2-fluorophenyl)-but-3-en-2-one1034-三氟甲基-2-羟基吡啶4-(trifluoromethyl) pyridine-2-ol104二氟甲磺酸Difluoro-methanesulfonic acid1053-氯-N-(4-甲氧基苯基)丙酰胺3-Chloro-N-(4-methoxy-phenyl)propanamide1062,6-二氯-3-氟苯乙酮1-(2,6-dichloro-3-fluorophenyl) ethanone1073-(2-甲苯氧基)苄胺盐酸盐1-[3-(2-methylphenoxy) phenyl] methanamine Hydrochloride108-1,2-乙二醇1-(1,1'-biphenyl-2-yl) ethane-1, 2-diol109乙氧羰基乙酰苯胺Ethyl carboxyl acetyl aniline1101-溴-2,3,4,5-四甲氧基-6-甲基苯1-Bromo-2, 3,4,5-tetramethoxy-6-methylbenzene1112-(2,3,4,5-四甲氧基-6-甲基苯基)乙醇2-(2,3,4,5-tetramethoxy-6-methylphenyl) ethanol1122,5-二甲酰基-3,4-二甲氧基甲苯2,5-Di-3, 4-dimethoxytoluene1132-异丁酰基丙二酸二乙酯Diethyl isobutyrylmalonate1145-氰甲基-3-（N'-乙撑基邻苯二甲酰亚胺）-4,5-二氢异噁唑{3-[2-(1,3-dioxo-1,3-dihydro-2H-I soindol-2-yl)ethyl]-4,5-dihydroisoxazol-5-yl}acetonitrile1153-(2-氯-3,3,3-三氟丙基)-2,2-二甲基环丙基乙酸3-(2-chloro-3,3,3-trifluoropropyl)-2,2-dimethylcyclopropanecarboxylic acid1162-氨基-1-(三苯甲氧基)-3-羟基-3-(4-硝基苯基)丙烷2-Amino-1-(triphenylmethoxy)-3-hydroxy-3-(4-nitrophenyl)propane1174-甲基-3-氧代-N-苯基戊酰胺4-methyl-3-oxo-N-phenylpentanamide118γ-(N`-邻苯(1E)-4-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)butanal oxime胺)丁肟119(3-苯基-4,5-二氢-5-异噁唑基)乙酸(3-phenyl-4,5-dihydroisoxazol-5-yl)acetic acid120methyl{3-[2-(1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)ethyl]-4,5-dihydroisoxazol-5-yl}acetate 121(2Z)-2-isobutyryl-N-phenylbut-2-enamide122α-氯代-4-氰基苯甲醛肟α-Chloro-4-cyanobenzenealdehyde oxime123α-溴-β-苯基丙酸α-bromo-β-phenylpropanoic acid1241-氟-4-(α-溴-α-苯基)乙酰基苯1-Fluoro-4-(α-bromo-α-phenyl)acetyl benzene125对氰基苯甲醛肟(E)-4-Cyanobenzaldehyldeoxime126N-环己基-3-氯苯甲酰胺N-cyclohexyl-3-chlorobenzamide1272,3-二甲氧基-5-甲基对苯二酚二苯甲酸酯4-(benzoyloxy)-2,3-dimethoxy-5-methylphenyl benzoate1284,5-二溴2-丁基-2,3-二氢咪唑4,5-dibromo-2-butyl-2, 3-dihydro-1H-imidazole1296-羟基-3,4-二氢喹诺啉酮6-hydroxy-3, 4-dihydroquinolin-2 (1H)-one130N-环己基-5-氯戊酰胺N-cyclohexyl-5-chloropentanamide1315-羟基-N-环己基戊酰胺5-hydroxy -N-cyclohexylpentanamide132乙酰氧基乙酰氯acetoxyacetyl chloride13831-31-7133异丁酰氯2-acetoxyisobutyryl chloride40635-66-31342-乙酰氧基异丁酰溴2-acetoxyisobutyryl bromide40635-67-41353-氨基巴豆酸乙酯ethyl 3-aminocrotonate626-34-61363-氨基巴豆酸异丙酯isopropyl 3-aminocrotonate14205-46-01373-氨基巴豆酸甲酯methyl 3-aminocrotonate14205-39-11383-氨基巴豆腈3-aminocrotononitrile1118-61-2139氯磷酸二乙酯diethyl chlorophosphate814-49-31402-羟基异丁酸2-hydroxyisobutyric acid594-61-61412-溴代异丁酸2-bromoisobutyric acid2052-01-91422-溴代异戊酸乙酯ethyl 2-bromoisovalerate609-12-11434-溴巴豆酸甲酯methyl 4-bromocrotonate1117-71-11444-溴巴豆酸乙酯ethyl 4-bromocrotonate37746-78-4145对溴苯甲酸甲酯methyl 4-bromobenzoate619-42-11463,5-二甲基异噁唑3,5-dimethylisoxazole300-87-81471-(4-氯苯基)乙醇1-(4-chlorophenyl)ethanol3391-10-4148吡啶硫酮锌Znomadine13464-41-71492,5-二氯噻吩2,5-dichlorothiophene3172-52-9150帕咪磷酸二钠disodium pamidronate1512-溴代异丁酸叔丁酯tert-Butyl 2-bromoisobutyrate23877-12-5152基乙酸乙酯Ethyl Diethoxyacetate6065-82-31532,2-二乙氧基乙醇2,2-Diethoxyethanol6065-82-31543-氨基-4-(2,2-二乙氧基乙氧基)巴豆酸乙酯Ethyl 3-amino-4-(2,2-diethoxy-ethoxy)- Crotonate3-amino-4-(2,2-diethoxy-ethoxy)-but-2-cnoic acid ethyl ester1552-乙酰基-3-(2-氯苯基)-丙烯酸甲酯2-Acetyl-3-(2-chlorophenyl)-acrylacidmethylester67593-46-8156氨氯地平中间体IIIAmlodipineIII3-Ethyl-5-methyl-4-(2-Chlorophenyl)-2-(2,2-diethoxy-ethoxymethyl)-6-Methyl-1,4-Dihydro-Pyridine-3,5-Didarboxylate103094-30-0157氨氯地平中间体IVIntermediates of Amlodipine3-Ethyl-5-methyl-4-(2-Chlorophenyl)-2-(2-phthalimidoethoxy)methyl-6-Methyl-1,4-Dihydro-Pyridine-3,5-Didarboxylate88150-62-31581-(3-氯苯基)哌嗪盐酸盐1-(3-Chlorophenyl)piperazine hydrochloride65369-76-81592-丁烯-1,4-二正丁酯2-Butene-1,4-Dibutyrate1572-84-51602-丁烯-1,4-二异丁酯2-Butene-1,4-Di-isobutyrate161氯磷酸二苯酯Diphenyl chlorophosphate2524-64-3162二氯磷酸苯酯Phenyl dichlorophosphate770-12-71631-(3-氯苯基)-4-(3-氯丙基)哌嗪盐酸盐1-(3-Chlorophenyl)-4-(3-Chloropropyl)piperazine hydrochloride39577-43-01642,6-二溴-4-甲基苯胺2,6-Dibromo-4-methylaniline6968-24-7165S-（-）3-叔丁氨基-1，2丙二醇S-(-)-3-(Tert-Butylamino)-1,2-Propanediol30315-46-91666-羟基-2(1H )-3 ,4-6-Hydroxy-2(1H)-3,4-Dihydroquinolinone Cilostazol intermediate54197-66-9酮西斯他唑中间体1677- 羟基-2(1H )-3,4-二氢喹啉酮7-Hydroxy-2(1H)-3,4-Dihydroquinolinone 或者Aripiprazole intermediate Ι1687-(4- 溴丁氧基)-2(1H ) -3,4-二氢喹啉酮7-(4-Bromobutoxy)-2(1H)-3,4-Dihydroquinolinone1691-(2 , 3- 二氯苯基) -哌嗪氢溴酸盐1-(2,3-Dichloro-phenyl)-piperazine hydrobromide Aripiprazole intermediate ΙΙΙ170盐酸曲唑酮Trazodone Hydrochloride 2-[3-[4-(3-Chlorophenyl)-1-piperazinyl]propyl]-1,2,4-triazolo-[4,3,a]pyridine-3(2H)-oneHydrochloride19794-93-5171吡啶三唑酮1,2,4-Triazolo[4,3-a]pyridin-3(2H)-one6969-71-7172磷酸三苯酯Triphenyl Phosphate TPP173茚曲他滨，拉米夫定中间体I (2R)-2-[(2’S)-2’-(Trimethylacetyloxy)phenylacetyloxymethyl]-1,3-oxathiolan-5-one Emtricitabine and Lamivudineintermediate174茚曲他滨，拉米夫定中间体II(5-Oxo-1,3-oxathiolan-2-yl) methyl butanoate Emtricitabine and Lamivudine intermediate1751,3-二噻烷-2-甲酸乙酯Ethyl 1,3-dithiane-2-carboxylate20462-00-41762,3,5,6-四氟苯甲醇2,3,5,6-Tetrafluorobenzen methanol Tetrafluorophenylmethanol98%177对（2-甲氧基乙基）苯酚4-(2-Methoxyethyl)phenol56718-71-91782,3-二氯苯甲醛2,3-Dichlorobenzaldehyde6334-18-51792,3-二甲氧基苯甲醛2,3-Dimethoxybenzaldehyde86-51-1180基苯甲醛3,4-Dimethoxybenzaldehyde120-14-91813,5-二甲氧基苯甲醛3,5-Dimethoxybenzaldehyde7311-34-41822,3-二氯苯甲酸2,3-Dichlorobenzoic acid50-45-31832,3-二甲氧基苯甲酸2,3-Dimethoxybenzoic acid1521-38-61843,4-二甲氧基苯甲酸3,4-Dimethoxybenzoic acid93-07-21853,5-二甲氧基苯甲酸3,5-Dimethoxybenzoic acid1132-21-41862,3-二氯苯胺2,3-Dichloroaniline608-27-51873-氯-2-氟苯胺3-chloro-2-fluoroaniline2106-04-91883-氯-4-氟苯胺3-chloro-4-fluoroaniline367-21-51892-氯二苯醚2-Chlorodiphenyl ether2689-07-8190对氯二苯醚4-Chlorodiphenyl ether7005-72-31913,4,5-三甲氧基甲苯3,4,5-Trimethoxytoluene6443-69-21922,6-二氯氟苯2,6-Dichlorofluorobenzene2268-05-5193亚氨基二乙酸二乙酯--194亚氨基二乙酸二甲酯--195二甲氨基乙酸乙酯Dimethylin ethyl acetate196二甲氨基乙酸甲酯Dimethylin methyl acetate197三乙基苄基氯化铵Benzyltriethylammonium chloride56-37-1198对二乙酰氧基苯1,4-Diacetoxybenzene1205-91-0199氧基苯1,4-Diisopropoxybenzene200二醋/乙酸六异丁酸蔗糖酯sucrose diacetate hexaisobutyrate126-13-6201Lamotrigine intermediates (Z)-(2,3-dichlorophenyl)-2-(guanidinyl imino)acetonitrile2022,3-Dichlorobenzoyl cyanide77668-42-9 2032,3-Dichlorobenzoyl nitrile77668-42-9 204Levetiracetam (S)-2-(2-oxopyrrolidin-1-yl)butanamide102767-28-22054-Butoxybenzyl alcohol(4-butoxyphenyl)methanol6214-45-52064-Fluoro cinnamaldehyde(E)-3-(4-fluorophenyl)acrylaldehyde2074-Hydroxyphenethyl alcoholTyrosol; 2-(4-Hydroxyphenyl)ethanol501-94-02084-Fluorophenethyl alcohol2-(4-Fluorophenyl)ethanol7589-27-72091-Naphthylacetamidealpha-Naphthaleneacetamide86-86-22101-(Chloromethyl)naphthalene1-Naphthylmethyl chloride86-52-22111-Naphthylacetonitrile1-Naphthaleneacetonitrile132-75-2212Methyl naphthalene-1-acetateMethyl 1-naphthylacetate or1-Naphthylacetic acid methyl ester2876-78-0213Bifenthrin alcohol2-Methyl-3-biphenylmethanol76350-90-82144-Fluorobenzenethiol371-42-62152-Methylresorcinol2,6-Dihydroxytoluene1,3-Benzenediol608-25-32162,5-Dihydroxytoluene1,4-BenzenediolMethylhydroquinoneToluhydroquinone2-Methyl-1,4-benzenediol95-71-6217Methyl methylthiomethyl sulfoxide(MMTS)33577-16-1 218Diethyl p-toluene sulfonyloxymenthylphosphonate 31618-90-3Diethyl (tosyloxy)methylphosphonate Tosyloxymethyl Diethyl Phosphonate2193-Bromoanisole1-Bromo-3-methoxybenzene2398-37-02203-Bromophenol591-20-8221Bisphenol AP4,4'-(1-Phenylethylidene)bisphenol1571-75-12224-Methylmorpholine N-oxide7529-22-8 2232-(4-Hydroxyphenyl)ethanol501-94-0 2243-Hydroxybenzyl alcohol620-24-6 2252,6-Dichloro-3-nitrotoluene29682-46-0 2262,4-Dichloro-3-methylbenzoic acid2272,4,5-Trifluoro-3-methoxybenzoic Acid112811-65-1 2281,3-Dichloro-2-methylanthraquinone2294,4'-(1-Phenylethylidene)bisphenol1571-75-1 2302-Amino-4-tert-butylphenol1199-46-8 2312-Hydroxy-4-methoxybenzaldehyde673-22-3 2322-Hydroxy-5-methoxybenzaldehyde672-13-9 2334-Methylmorpholine N-oxide7529-22-8234(R,R)-N,N'-Bis-(3,5-di-tert-butylsali-cylidene)-1,2-cyclohexanediamino- Cobat(II)176763-62-5235(S)-(+)-Epichlorohydrin (36°) 67843-74-7 2362-(2-Bromoethyl)-1,3-dioxolane18742-02-4 2372-(2-Bromoethyl)-1,3-dioxane4021-34-5238氨基杂环盐酸盐Aminoheterocycliring239氮杂双环盐酸盐3-azabicyclo[3.3.0] octane HCl240环戊二碳酰胺Cyclopentane241对甲苯磺酰脲o-dicarboxylicimide P-Tolylsulfonglrea2424-异丙基苯甲酸4-Isopropylbenzoic Acid243β-苯乙胺盐酸盐;2-苯乙胺盐酸β-phenylethylamine hydrochloride;2-phenethylamine hydrochloride156-28-5。

INP-TN5A0072-E 无纸机通信功能（以太网）类型：PHF 说明书

2. ETHERNET COMMUNICATION FUNCTIONS ············································································· 2 2.1 LAN port specification···················································································································· 2 2.2 Connection to the terminal ·············································································································· 2 2.3 Connection ······································································································································ 2 2.4 Setting Ethernet communicating conditions ···················································································· 3 2.5 Ethernet communicating conditions setting operation ····································································· 3

第三章危险货物一览表

15、应急措施表号EmS为3-06，在《国际海运危险货物规则》补充本应急表3-06可以获知在该物质发生溢漏或火灾时应配备的专用应急器材、应急程序和采取的应急行动。如应配备的专用应急器材有：防护手套、自给式呼吸器、喷雾水枪；当处理溢漏或扑救火灾时要穿戴防护服和自给式呼吸器；在采取应急行动时应避免所有火源；处理溢漏可用大量的水冲洗或用吸收材料收集然后安全处置；发生火灾可用水雾或干粉灭火，不能使用水射流或泡沫，如有可能，转移可能涉人火中的容器，或用大量水保持其冷却。
第三章危险货物一览表和限量豁免运输
作用：为从事危险货物运输的人提供详细的技术资料
内容：划定危险货物范围、联合国编号、正确运输名称、运输限制条件、分类及其标志、副危险性及其标志、海洋污染物标记、包装类、有关的特殊规定、豁免运输的限量、包装、罐柜和中型散装容器导则、应急措施表号、积载与隔离、危险特性及注意事项。
应的注意事项 18、同第1栏
第五节放射性物质明细表《国际危规》对于运输放射性物质专门提供了14张表，每一张表分别列出各种危险货物的特性、包装、标记、标志、注意事项、积载和隔离等多项规定和说明。
第六节限量内豁免的危险货物一、限量豁免：危险小、运量少的危险货物可按一般货物运输《限量运输一般规定》
4、未另列明的通用条目：凡符合某个标准就归入一个编号。
如:UN 1993 易燃液体，未另列明的。(闪点在闭杯61℃以下的液体)
通用条目和未另列明的条目太泛、太概括。所以一般都有一个技术名称作为补充。
第四节危险货物一览表各个栏目的说明一共18个栏目，其中第1和第18个栏目都是联合国编号
包装
中型散装容器
12、IMO罐柜导则为T4，在《国际海运危险货物规则》第4.2 章 4.2.4.3.6可移动罐柜导则或本书第四章中，可以得到具体要求。

医学和检验医学常用名词英文缩写

甲型肝炎病毒
HAV
间接荧光抗体试验
IFA
乙型肝炎病毒
HBV
传染性单核细胞增多症
IM
丙型肝炎病毒
HCV
酮体
KET
丁型肝炎病毒
HDV
17-酮类固醇试验
17-KST
戊型肝炎病毒
HEV
千克
KG
乙型肝炎外表抗原
HbsAg
卡门氏单位
KU
乙型肝炎外表抗体
HbsAb
白陶土活化局部凝血酶时间
KPTT
乙型肝炎e抗体
HbeAb
SG
等电点
PI
血氧饱和度
SAT
血小板免疫荧光试验
PLFT
血清铁
SI
百万分之一
PPM
标准碱量
SBC
过氧化物酶
POX
选择性蛋白尿
SPU
过碘酸-雪夫氏反响法
PAS
嗜中性杆状核粒细胞
ST
反响
R
志贺氏菌属
SH
红细胞
RBC
葡萄球菌
STA
红细胞计数
HT
链球菌属
STR
转/分
REV/MIN
磺胺类
SU
放射免疫分析
RIA
ACT
本-周氏蛋白
BJ(BJP)
抗血友病球蛋白
AHG
血液
BLD
急性心肌梗死
AMI
葡萄糖
GLU
α2-抗纤溶酶
α2-AP
溴麝香草酚兰
BTB
活化蛋白C
APC
根底代谢率
BMR
活化局部凝血酶时间
APTT
血液尿素氮
BUN
血小板计数

钢管及管件中英文对照

钢管及管件中英文对照90°ELBOW,BW,20#,SMLS,LR,GB/T8163,SH/T3408,GrⅠ,Sch4090度弯头，对焊，20#碳钢材质，无缝，制造标准GB/T8163 ，验收标准SH/T3408，质量等级1级，SCH40是ASME壁厚表示方式三通1 1/2"*3/4" SW SCH80 20 GB/T14383(I)是什么意思异径三通 1 1/2"*3/4" SW(承插焊) SCH80(厚度，查询可得知具体厚度) 20（材质，20#碳钢）GB/T14383(I)（标准号）90 ELBOW 20# GALV SMLS GB/T8163,LR BW:SH3408 SCH80 其中GALV和LR 代表什么意思？" SWAGE NIPPLE 20# GB8163 PBE:MSS SP-95 SCH80 中PBE:MSS SP-95 是什么意思？SPIRAL WOUND GASKET CL150 RF ,4.5MM, 304+GRAF ,344 INNERRING,CS OUT RING: SH3407 其中红颜色的字母代表什么意思？20＃GB/T699 SW 平底形40T025/01 SCH160 中的红颜色的字母代表什么意思？螺柱/螺母STUD BOLT WITH 2 HEAVY NUTS,35CRMOA/35CRMOA,SH3404 其中红颜色的字母代表什么意思？以上表示的字母可以在哪里查到啊GALV英文为galvanized是镀锌的意思，一般是仪表风管线和水管线。

LR英文为long radius是长半径弯头的意思。

4.5MM, 304+GRAF ,344 INNERRING,CS OUT RING，表示垫片厚度为4.5mm，304不锈钢＋石墨外环，内环为344材质40T025/01，这个应该是洛阳石化设计院标准，关于加强管接头等管件STUD BOLT WITH 2 HEAVY NUTS,35CRMOA/35CRMOA，表示一个双头螺栓和2个六角螺母，材质为35CRMOA) c'1 GALV 镀锌 LR 长半径1 t0 y( e. ]$ ^: \$ G4 s d5 E2 PBE 两端平口 MSS SP-95 管件和阀门制造商协会标准* Q8 n& h1 M4 W5 e Z5 |2 P$ p3 厚度4.5MM 304+石墨缠绕垫304+GRAF 344不锈钢材料内环344 INNERRING 碳钢外环CS OUT RING4 洛阳设计院的标准“洛阳石化短接头图集”40T025/015 双头螺栓STUD BOLT WITH 2 HEAVY 螺母NUTS 材质35CRMOA/35CRMOACoupling half 1-1/2NPT 3000PSI ASTM 105CS 是什么意思啊介绍详细点特别是1-1/2NPT 是什么意思？半管接头规格1-1/2NPT （英寸）压力3000英镑碳素钢105CS（相当于20#）GATE VALVE A105 SW 13Cr W/STELLITE SEATS BB OS&Y PLAIN SOLID WEDGE API CL800 API 602SPW-304SS/GRAPHITE% z% r/ T M0 w) G' U8 G ]A105：指ASTM A105 是碳素钢锻件，它相应的中国牌号在GB/T12228-2005中规定为A105（20#钢）SW ：SOCKET WELDED承插焊，( n+ U; B0 ~( f2 e' y7 ?5 T13Cr W/STELLITE SEATS ：阀座材质为13Cr，阀座密封面堆焊了钨铬钴合金（W就是WELD，焊接），Cr13就是含13%Cr的马氏体不锈钢，耐磨耐温。

新蕾普NMI e500诊断式呼吸机说明书

S ,★L A R AO RN T ★M T EO GY I N★★Y★★Soma Technology Inc. • 166 Highland Park Drive • Bloomfield, CT 06002 • USARevised 10/30/2012Compensation, Violation Message Log.• N on-invasive Ventilation, Compatible with mask ventilation for continuous or short term use.• O2 Calibration • P re-Silence Alarm, suspends ventilation while delivering continuous flow after a planned disconnect.• Events History LogNote: The technical data given in this publication is for general information and is subject to change without notice. Actual configuration on the unit may vary. Contact our sales representatives for a complete list of details.Controls Patient Selection:Pediatric/Infant - AdultBreath Type:Volume Control (VC), Pressure Control (PC), or Volume Target Pressure Control (VTPC)Modes (in each Breath Type):Assist/Control Mandatory Ventilation (A/CMV)Synchronized Intermittent Mandatory Ventilation (SIMV)Spontaneous (SPONT)Spontaneous Breath Choices:Pressure Support (Psupport) or none in VC or PC, Volume Target Pressure Support (VTPsupport using Plimit) in VTPC Back Up Ventilation: All modesSlope/Rise:1-19 (PC, VTPC, Psupport and VTPsupport)Pressure Support (Psupport):Pediatric/Infant: 0 to 50 cmH2O/mbar Adult: 0 to 60 cmH2O/mbar Expirtory Threshold5-50% (Psupport and VTPsupport)VT (Tidal Volume):(BTPS compensated)Pediatric/Infant: 20 to 1000mL Adult: 100 to 3000mLƒ(Frequency/Rate)Pediatric/Infant: 1 to 120 b/min Adult: 1 to 80 b/min⌄(Inspiratory Flow)Pediatric/Infant: 1 to 100 L/min Adult: 1 to 180 L/min ⌄(Flow) Pattern Square Descending Ramp Pause:Off, 0.5, 1.0, 2.0 secSigh ø (off) or On:Delivers one sigh breath every 100 breaths, where sigh VT =1.5* VT SettingPlimit (Pressure Limit)(PC, VTPC & VTPsupport)Pediatric/Infant: 0 to 70 cmH2O/mbar Adult: 0 to 80 cmH2O/mbar tI (Inspiratory Time)Pediatric/Infant: 0.1 to 3.0 sec Adult: 0.1 to 5.0 sec I:E Ratiomax. inverse 4:1trig (sensitivity) type: P-Pressure Trigger:0 to -5 cmH2O/mbar⌄-Flow Trigger:Pediatric/Infant: 0.1 to 2.0 L/min Adult: 0.6 to 2.0 L/min FIO2 (oxygen Concentration)21 to 1.00PEEP/CPAP (Pbase)Pediatric/Infant: 0 to 30 cm H2O/mbar Adult: 0 to 45 cm H2O/mbar Leak Compensation:(on/off)Pediatric/Infant: 8 L/min max Adult: 15L/min max Bias Flow: 3 L/min Manual Inflation: 5 seconds maxExp. Hold:20 seconds max100% O2Delivers 100% oxygen for 3 minAlarmsAdjustable Alarms Low E (Exp. Minute Volume)High E (Exp. Minute Volume)Low Paw (Airway Pressure)High Paw (Airway Pressure) Automatic AlarmsPatient Alarms:O2 Variability ±0.07 of settingApneaProximal Line DisconnectLow Baseline PressureHigh Baseline PressureSustianed High Baseline Pressure Operator Alarms:Insp. Time Too LongInsp. Time Too ShortI:E Ratio inverse ViolationPlimit below PbaseLow Paw below PbaseVol Target Not Met(Alarm or Setting) Out of RangeBack Up VentGas Supply AlarmsPower Fail AlarmsPower Down AlarmDevice AlertDimensionsGas Delivery UnitWidth9.8″ (24.8cm)Depth:21.5″ (54.6cm) (includes all fittings) Height:9.5″ (24.1cm)Weight:41.3 lbs. (18.7kg)Control Panel ModuleWidth:13.9″ (35.3cm)Depth: 1.5″ (3.8cm)Height:12.1″ (30.7cm)Weight: 6.5lbs (2.9kg)e500 Custom CartWidth:20.5″ (52cm) at baseDepth:26″ (66cm)Height:48″ (121.9cm)Weight:81lbs (36.8kg) ship weightTotal Height:62.5″ (158.7cm) e500 and GDM mounted.Soma Technology Inc.166 Highland Park DriveBloomfield, CT 06002 • USA1.800.438.7662。

美国尼克萨里公司产品说明书：多利净鸟排除网巾系统

Three-Part Specifications - Copyright 2021 - Nixalite of America IncPollyNet™ Bird Exclusion Netting System Includes specifications for: PollyNet Bird Netting, Poly Hardware System and theTensioned Perimeter & Support Cable System for PollyNet.Nixalite’s PollyNet Bird Exclusion Netting is an extruded, knotless bird netting that comes in two (2) grades; Premium and Lightweight. While both grades are made from the same UV resistant, black polypropylene, each grade has a very different purpose.Premium PollyNet uses a ½” (12.7 mm) square mesh to keep out birds of all sizes. It comes 14 feet wide (4.3 m) and in several pre-cut lengths. This is a tough and resilient netting made to withstand the rigors of both indoor and outdoor bird netting installations. Premium grade PollyNet can be used for architectural, agricultural and aquacultural bird exclusion netting applications.Lightweight PollyNet is intended for temporary installations. Use when low visibility and economy are more important than durability. It comes in several pre-cut widths and lengths. Lightweight PollyNet has a 13/16” (20 mm) square mesh. Lightweight grade PollyNet is often used to cover gardens, plantings and other short term applications.Nixalite offers a matching system of mounting hardware called the Poly Hardware. Made of the same material as the netting (UV resistant polypropylene) the Poly Hardware provides quick, easy and versatile fastening. The Poly Hardware items can also be mixed with the Tensioned Perimeter and Support Cable system for long term fastening.The following specification outline is presented in a modular format making it simple to include or exclude any combination of Nixalite’s PollyNet Bird Exclusion Netting system as needed for each project.List Nixalite PollyNet 3-part specifications in the following locations;Master Format 1995 – 10290 – Bird & Pest ControlMaster Format 2004 – 10 81 00 - Pest Control DevicesMaster Format 2004 – 10 81 13 – Bird Control DevicesPART 1 - GENERAL1.1 - SYSTEM DESCRIPTION:A.PollyNet Bird Exclusion Netting is constructed of black, UV resistant polypropylene. The knotlessmesh is effective in excluding birds of all sizes. PollyNet Bird Netting is available in two grades,Premium and Lightweight.B.Poly Hardware fastens the PollyNet bird netting to all types of surface shapes and materials. A varietyof netting installation tools and accessories are available to make the netting installation an efficientprocess.C.Surface Cleaning System: surface disinfectants and deodorizers to neutralize potentially hazardous birdand/or animal wastes and properly prepare the surface for installation.1.2 - QUALITY ASSURANCEA.Installer to obtain, review and understand all of Nixalite of America Inc.’s planning guidelines,estimating worksheets and installation instructions for the PollyNet Bird Exclusion Netting.B.Installer must be completely familiar with the proper installation procedures for the PollyNet BirdExclusion Netting and the specified mounting system.C.Installer must obtain and record accurate and complete dimensions that define the areas specified forenclosure by the PollyNet Bird Exclusion Netting. Accurate dimensions drive the bird netting and net hardware quantities. Accurate dimensions ensure accurate quotations and material orders.D.Installer should contact manufacturer for any updated or newly developed planning or proceduralinformation that may be pertinent to the PollyNet installation.E.Installer to ensure that specified netting (PollyNet) is MADE IN THE USA.1.3 - SUBMITTALSA.Manufactu rer’s literature including PollyNet Bird Exclusion Netting brochures and installationguidelines. All guides for installing the specified bird netting hardware system and the specified surface cleaning system.B.Sample of the PollyNet Bird Exclusion Netting. Sample to be not less than 4” square (10.16 cm. square).C.Contractor to complete estimate worksheet detailing the scope of the netting enclosure, and themounting hardware type, location and spacing.1.4 – STORAGE & HANDLINGA.Provide storage to keep all PollyNet Bird Exclusion Netting system boxes dry, clean and undamaged.Do not stack or place other packaging or objects on the bird netting shipping boxes.B.Keep the PollyNet Bird Exclusion Netting system in original packaging until needed for installation.PART 2 - PRODUCTS2.1 – ACCEPTABLE MANUFACTURERA.Nixalite of America Inc1025 16th Avenue, PO Box 727, Dept. NI, East Moline, Illinois 61244; U.S.A.P: 800.624.1189 or 309.755.8771 - F: 800.624.1196 or 309.755.0077E: ************************ or *********************B.ABC Advanced Bird Control – A division of Nixalite of America Inc.PO Box 727, Dept. NI, East Moline, Illinois 61244, U.S.A.P: 888.212.8682 or 309.755.4708 - F: 309.755.1865E: ***********************2.2 – POLLYNET BIRD EXCLUSION NETTINGA.Material:Both Premium and Lightweight PollyNet are made from black, extruded polypropylene that is UV and rot resistant. Netting to be waterproof. Resulting netting is ideal for all bird exclusion applications.B.Construction:Both Premium and Lightweight PollyNet are knotless, extruded and pre-stretched nets. All PollyNet nets are both seamless and borderless for clean edges and easier perimeter fastening.C.PollyNet mesh size by grade (average):Premium: ½” (1.3 cm) square. Keeps out all sizes of bird pest birds.Lightweight: ¾ ” (19 mm) square. Keeps out birds of all sizes.D.PollyNet Sizes by Grade:Premium PollyNet:Width - 14’(4.2 m)Lengths - 50’(15.2m), 100’(30.4 m), 200’(61 m) and 3,000’(914.4 m).Lightweight PollyNet:Width: 14’(4.2 m) & 28’ (8.4 m)Lengths –28’ (8.4 m), 50’(15.2m), 100’(30.4 m), 500’(152.4.2 m) and 1,000’(304.8 m)E.PollyNet Physical Properties:Premium PollyNet:Average strength – 219 lbs. per foot (97.5 kg).Average strand count – 2 per inch.Weight: 8.5 lbs. (3.8 kg) per 1,000 square feet.Lightweight PollyNet:Average strength – 68.5 lbs. per foot (31 kg).Average strand count – 9 per 10” ( 25.4 cm)Weight: 2.8 lbs. (1.2kg) per 1,000 square feet (92.9 m2).F.PollyNet Thermal Properties:Melting point (approximately) : 320+ degrees F.Flash point (approximately) : 625 degrees F.Remains flexible at very low temperatures.Polypropylene is an inert compound and resistant to a wide range of chemicals.G.Warranty:5 year limited warranty on Premium PollyNet ONLY.2.3 BIRD NETTING HARDWAREA.Installer to contact manufacturer for up-to-date information and recommendations for bird nettinghardware applications, item combinations as well as new items and procedures.B.Available in Poly Hardware, the Tensioned Support Cable Hardware or a hybrid system thatcombines methods from both systems. Choose the hardware system that best suits the netting installation and conditions.C.Poly Hardware: All poly hardware is made from UV stabilized black polypropylene. Hardwarecombinations can be mixed to suit changing surface materials and conditions.a)Poly Clip: Perimeter fastening. Secure to perimeter with hardware recommended by manufacturer.Poly Clips is also used to attach the PollyNet Premium to an installed perimeter cable. Max centerto center spacing between Poly Clips in a row is 12” (30.5 cm). O. C.b)Twist Locks: Seam fastening. Twist Locks are used to join two (2) overlapped pieces of thePollyNet at an overlap seam or to close up cuts or tears in the netting. Install every 3” (7.6 cm)along both sides of an overlapped seam. Can be installed, removed and reinstalled quickly to gainaccess to the areas behind the netting.c)Net Ties: Multi-purpose fastener. Military spec UV resistant Net Ties quickly fasten the netting toall types of e to prevent net sag or loose fitting net by securing the netting to objectsabove or behind netting enclosure. Three sizes to choose from.d)Poly Cord: Multi-purpose fastener. Reinforce seams, patch tears, close circular openings, use foroverhead support. Do not use for perimeter fastening.D.Tensioned Perimeter and Support Cable Hardware System: Choose the Connection, Corner,CableGuide and Finishing hardware that best suits the installation surface. Net Hardware can be mixed to suit changing surface materials and conditions.Net Cable & Connection Hardware:a)Net Cable:Aircraft grade, all stainless steel, 7 x 7 (49 strand), 3/32” (2.2 mm) diameter cable with900 lb. (407 kg) breaking strength. Net Cable comes in 250’ (76.2 m) and 500’ (152.4 m) spools.b)Turnbuckles: Stainless steel, hook & eye turnbuckles. The size of the turnbuckle is determined bythe maximum continuous cable length of any one cable run.For one Small Turnbuckle the max continuous cable length is 25 ft. (7.6 m).For one Medium Turnbuckle the max continuous cable length: 50 ft. (15.2 m).For one Large Turnbuckle the max continuous cable length: 75 ft. (22.9 m).c)Net Ferrules:Zinc plated copper core crush ferrules for 3/32” (2.2 mm) dia. cable. Acceptableconnection when the max continuous cable length is 25 ft. (7.6 m) OR LESS. Always use at least2 ferrules per cable loop connection. Always use Nixalite’s Cable Swaging Tool to crush theferrules onto the cable at all loop connections. Always use a Cable Thimble with Net Ferrules.d)Wire Rope Clamps: Galvanized or stainless steel wire rope clamps for 3/32” (2.2 mm) diametercable. Mandatory for all loop connections on cable runs of 25’ (7.6 m) OR MORE. Always use 2 clamps per cable loop connection. Always use a Net Cable Thimble with wire rope clamps. Usethe appropriate wrench or hex driver to tighten the Wire Rope Clamp around the Net Cable at allloop connections.e)Cable Thimble:Forged stainless steel Cable Thimble for 3/32” (2.2 mm) diameter cable. TheThimble prevents cable fraying and creasing when creating loop connections and/or tensioning the Net Cable after installation. One Thimble is required for each loop connection.Corner Hardware (Anchoring):a)Eyebolts: Use as corner hardware in steel, thick sheet steel, cast iron, masonry and stone (withMachine Screw Anchors). Extreme duty stainless steel eyebolt, 2” (51 mm) long, 9/16” I.D. (14.3mm) with 1/4-20 NC threads and stainless steel hex nut. Maximum distance between eyebolts: 50’(15.2 m).b)To fasten to Steel: If back of steel is accessible, drill clearance hole for stem, apply adhesive inhole, install eyebolt and use ¼ - 20 NC hex nut to secure. If back of steel is not accessible, drillthen tap the hole for ¼ - 20 NC thread. Apply adhesive into hole, apply thread locker on eyeboltthreads. Install the eyebolt.c)To fasten to Masonry: Drill the recommended hole diameter and depth in the masonry surface toreceive the Machine Screw Anchors. Apply adhesive/sealer in the hole. Push Machine ScrewAnchor into the hole and seat it properly with the Setting Tool. Thread eyebolt into the anchorthreads until tight.d)Screw Eyes: Use as corner hardware in wood and wood core surfaces. Extreme duty stainless steelscrew eyes 2” (51 mm) long, 17/32” I.D. (13.5 mm). Pilot holes recommended. Apply adhesivesealer into pilot holes before installing the Screw Eyes. Maximum spacing between screw eyes:50’ (15.2 m).e)Machine Screw Anchor: Zinc plated anchor –1/2” (12.7mm) diameter x 1” (25.4 mm) deep with1/4-20 threads inside. Setting tool included with anchors.Cable Guide Hardware:a)Small Screw Eyes: Use to keep cable close to the installation surface. Use on wood, sheet metaland wood core surfaces. Heavy duty, stainless steel, 1-3/16” long x 7/32” I.D. (31 mm long x 5.3 mm I.D.). Maximum spac ing: 24” (61 cm) O. C. Pilot holes recommended. Apply adhesive/sealer in all pilot holes before installing the Screw Eyes.b)Small Eyebolts: Use to keep cable close to the installation surface. Use on steel, thick sheet metaland masonry surfaces. Heavy duty, stainles s steel, 1 3/8” long x 9/32” I.D. (35 mm long x 7.1 mmI.D.) with stainless steel hex nut. Maximum spacing: 24” (61 cm) O. C.To fasten to Steel: If back of steel is accessible, drill clearance hole for stem, apply adhesive in hole, install eyebolt and use 10 - 24 NC hex nut to secure. If back of steel is not accessible, drill then tap the hole for 10-24 NC thread. Apply adhesive into hole, apply thread locker on eyebolt threads and install the eyebolt.To fasten to Masonry: Drill the recommended hole diameter and depth in the masonry surface to receive the Machine Screw Anchors. Apply adhesive/sealer in the hole. Push Machine ScrewAnchor into the hole and seat it properly with the Setting Tool. Thread eyebolt into the anchor threads until tight.c)Sidewinders:for heavy gauge sheet metal, structural steel up to 1/2” thick and masonry surfaces.Maximum spacing: 24” (61 cm) O. C. All Sidewinders to be installed with the Sammy Socket. No substitutions.Sidewinders for steel are self-drill, self-tap items, no pilot hole is required.Sidewinders for concrete require ¼” (6.35 mm) diameter and 2” (50.8 mm) deep drilled holes.NOTE Always apply adhesive/sealer into drilled holesNOTE Always install Sidewinders with the Sidewinder Socket Driverd)E-Z Clip: Use to keep cable close to the installation surface. Stainless steel bracket holds cablevery tight to surface. Used on all types of installation surfaces. E-Z Clip has mounting hole(s) for 1/8” shank screws or nails (not supplied).e)Hammer-On Flange Clips: Used to keep cable close to the installation surface. Hammer-OnFlange Clips are available in block oxide coated spring steel or stainless steel. Hammer-On Flange Clips routes the Net Cable parallel to the outer edges of beams or other structural steel flanges.Contact manufacturer for installation guidelines.f)Stainless Steel Angle Bracket: Used to keep the Net Cable close to the installation surface. A 90ostainless steel angle bracket with two (2) holes – one for mounting the other for the cable. Fasten with the appropriate fastener (not supplied). Use stainless steel screws or nails. Applyadhesive/sealer over head of installed hardware.g)HD Stainless Steel Cable Clamp: Used to keep the Net Cable close to the installation surface. Aheavy duty saw-tooth edge clamp t hat fits up to ¾” (19.0 mm) thick steel. Routes the Net Cable parallel to the outer edges of beams, plates and other structural steel flanges. Contact manufacturer for installation guidelines.h)Stainless Steel J-Clamp: Used to keep the Net Cable close to the installation surface. A J-shapedstrap of stainless steel with mounting and cable guide holes. Fasten with the appropriate fastener (not supplied). Use stainless steel screws or nails. Apply adhesive/sealer over head of installed hardware.i)Stainless Steel Lag Screw w/eyelet: Used to keep the Net Cable close to the installation surface.Fastens to wood, composite, wood core products. Drill pilot hole, apply adhesive/sealant in pilot, install Lag Screw so eyelet is no more than ½” (12.7 mm) above the installation surface.Finishing Hardware:a)Fasten the PollyNet to the perimeter cable with the Poly Clips. Install every 12” (30.5 cm) alongthe run of the cable.b)For quick access behind the netting, use the Twist LoksAdditional Installation Methods: PollyNet Bird Exclusion Netting lends itself to a variety ofinstallation methods. Contact the manufacturer for details on additional installation methods.2.4 – SURFACE CLEANING SYSTEMA.Steri-Fab: Surface disinfectant and bactericide designed to neutralize bird waste, making it safe forremoval. Steri-Fab quickly kills disease causing bacteria, parasites, fungi, insects, etc. This is a non-residual product. It becomes completely inert after it dries. Do not use with Microcide-SQ on the same surface at the same time.B.Microcide-SQ: A broad spectrum disinfectant, cleaner and deodorizer used to sanitize hard surfaces aswell as fabrics and clothing. Use to kill a wide spectrum of organisms and disease causing bacteria. Do not use with Steri-Fab on the same surface at the same time.C.Microsan: Anti-microbial personal protection products to help prevent disease transmittal before, duringand after working on and around surfaces contaminated with bird and animal wastes. Use to compliment personal protection equipment standards (PPE).D.Safety Equipment: Nixalite offers personal protection equipment (PPE) to protect personnel from thehazards related to pest bird and animal waste materials.PART 3 - EXECUTION3.1 - INSPECTIONA.Visually inspect the surfaces that will receive the netting hardware and all areas that will end up behindor inside the netting installation. Note damaged surfaces or incomplete construction that couldcompromise the bird netting installation.B.Note all areas, surfaces or objects that may require maintenance or periodic replacement after the birdnetting is installed (i.e. lights, electrical equipment, etc.). Use the appropriate netting accessories toallow access behind the installed netting system.C.Note any objects or conditions that could damage the installed bird netting. Install the PollyNet in such amanner as to avoid these conditions.3.2 - PREPARATIONA.Field Measurements: Verify the dimensions for each area specified for enclosure with the PollyNetBird Exclusion Netting. Use manufacturers Planning Guides to verify that sufficient quantities of bird netting and net hardware will be installed at each location specified for bird netting.B.Make sure all installation surface finishing requirements have been accomplished before installing thePollyNet Bird Enclosure Netting. Bird netting is to be the last item installed on each specified surface.DO NOT apply any surface coating or treatment (paint, sealer, etc.) over or on the installed PollyNetBird Exclusion Netting or the mounting hardware.3.3 – SURFACE CLEANINGA.All surfaces to be clean, dry and free of obstructions before the Bird-Net Bird Exclusion Netting isinstalled.B.If Bird Waste Is Present:Treat, neutralize and safely remove all bird waste from installation surfaces. Installer must follow allmunicipal, state and federal regulations regarding the proper removal and disposal of bird droppings and waste materials such as nests and dead birds.e Nixalite’s surface cleaning products to neutralize any bird droppings, nests and related was tematerials that may be present. Allow all surfaces to air dry completely, and then reapply to sanitize and deodorize the surface before proceeding. Strictly follow treatment instructions provided with Nixalite’s surface cleaning products.e Nixalite anti-microbial and anti-bacterial personal protection products to help prevent diseasetransmittal when working around surfaces contaminated with bird3.4 - INSTALLATIONA.Install the bird netting hardware as recommended by manufacturer.B.Install PollyNet as recommended by the manufacturer. If necessary cut the PollyNet to fit the area. Ifmultiple pieces are needed, join the pieces together with the recommended seam fastening hardware.C.Install PollyNet to avoid contact with machinery, vehicles, extreme heat, tree branches, etc. Makenecessary adjustments to keep netting a sufficient distance from these objects or conditions.D.Finished PollyNet installation to be taught, free of wrinkles, gaps and openings.3.5 – ADJUSTMENTS / CLEANINGA.Remove net or cable hardware debris and waste from project site. Inspect finished installation. Makeany adjustments needed to conform to Nixalite’s bird netting installation guidelines.B.PollyNet Bird Exclusion Netting is a physical and passive barrier. It relies on optimal placement andproper installation. Exclusion netting must block off or seal up all routes and paths that pest birds follow to their preferred roosts. Periodic inspections are recommended to make sure the bird netting stays in good condition.C.Note any holes, gaps or openings in the bird net installation that birds can use to bypass or get aroundthe netting barrier. Correct these conditions immediately.Nixalite of America Inc – 1025 16th Avenue – East Moline, IL. 61244P:309.755.8771E:************************Copyright 2021 – Nixalite® of America IncNixalite® is a registered trademark of Nixalite® of America IncPrinted with pride in the USA.。

阀门英文单词缩写

阀门中英文对照英文中文译名英文中文译名英文中文译名Ecc Reducer 偏心异径管PTFE 聚四氟乙烯PIPE管,导管,输送管Con Reducer 同心异径管RPTFE 增强聚四氟乙烯Fittings：配件,附件BE 坡口RF 突面Flanges：法兰BW 对焊STR 过滤器Gaskets：垫片,垫圈;接合垫BL 法兰盖SM 无缝Instruments：阀门BC.SWING 螺栓阀盖旋启式STL 硬质合金Miscellaneouscomponents：其它配件BB.OS&Y 螺栓阀盖外螺纹及轭式SW 承插erection materials：安装材料BC.LIFT 螺栓阀盖升降式SO 平焊bolts:螺栓Dual-plate 双蝶板Sch 管道壁厚标号SO——带颈平焊法兰FB.L.OP. 全通径手工操作SB.ISRS 螺纹阀盖内螺纹明杆WN——带颈对焊法兰FB.GEAR OP. 全通径齿轮操作I 内螺纹暗杆PL——板式平焊法兰FF 全平面WL 焊接RF——密封面形式代号，密封面形式为“突面FL 法兰WN 带颈对焊GATEVALVE：闸阀F 锻件WFR 对夹P 管子PipeGV 镀锌Y2 半硬EL 弯头ElbowHF 硬质合金堆焊SSAW 螺旋缝埋弧焊ELL 长半径弯头Longradius elbow LJ 活套法兰LSAW 直缝埋弧焊ELS 短半径弯头Shortradius elbowL 翻边短节短规格EFW 电熔焊MEL 斜接弯头（虾米腰弯头）Mitre elbowLL 翻边短节长规格SMLS无缝REL 异径弯头ReducingelbowMFR'S.ST'd 制造商标准LSAW 直缝埋弧焊管T 三通Tee NPT 螺纹(60O) RT 异径三通Reducing tee LT 斜三通Lateral tee PE 平口R 异径管接头（大小头）Reducer1 i CR 同心异径管接头（同心大小头）ConcentricreducerER 偏心异径管接头（偏心大小头）Eccentricreducer5CPL 管箍Coupling FCPL 双头管箍Fullcoupling0HCPL 单头管箍Half coupling4RCPL 异径管箍Reducing coupling BU 内外螺纹接头Bushing UN 活接头Union5HC 软管接头Hose coupler!SE 翻边短节Stub end NIP 短节Pipe nipple or straight nipple SNIP 异径短节Swaged nipple CP 管帽（封头）Cap PL 管堵（丝堵）Plug BLK 盲板Blank SB 8字盲板Spectacleblind PLG 法兰Flange RP 补强板Reinforcing pad SOF 平焊法兰Slip-onflange0SWF 承插焊法兰Socket-welding flange8WNF 对焊法兰Welding neck flange T 螺纹法兰Threadedflange6 LJ 松套法兰Lapped joint flange REDF 异径法兰Reducing flange&BF 法兰盖（日法兰）Blindflange"FSF 法兰密封面Flange scaling face/ F FF 全平面Flat face)RF 凸台面Raised face MFF 凹凸面Male ａnd female face)LF 凹面Female face LM 凸面Male face RJ 环连接面Ring joint face TG 榫槽面Tongue ａnd groove face TF 榫面Tongue face GF 槽面Groove face G 垫片Gasket+NMG 非金属垫片Non-metallic gasket AG 石棉垫片Asbestos gasket RG 橡胶垫片Rubber gasket SWG 缠绕式垫片Spiralwound gasket,SMG 半金属垫片Semimetallic gasket TEG 聚四氟乙烯包复垫片PTFE envelopegasket MJG 金属包垫片Meta-jacket gasketMG 金属垫片Metallic gasket6FMG 金属平垫片Flat metallic gasket LER 透镜式金属环垫Lensring gasketOCR 八角形金属环垫Octagonal ring gasket SMSG 齿形金属垫片Solid metal serratedgasket OVR 椭圆形金属环垫Oval ring gaksetIR/OR 内外定位环Inner ring ａnd outer ring IR 内定位环Inner ring OR 外定位环Outer ring4B 螺栓Bolt&SB 螺柱Stud bolt WSR 垫圈WasherNU 螺母Nut TB 花蓝螺母Turnbuckle GV 闸阀Gate valve SWSR 弹簧垫圈Spring washer GLV 截止阀Globe valve CHV 止回阀Check valve BUV 蝶阀Butterfly valve7BAV 球阀Ball valve PV 旋塞阀Plug valve（cock）CV 调节阀Control valve SV 安全阀Safety valve RV 减压阀Pressurereducing valve4 ST 蒸汽疏水阀Steam trap PRV 泄压阀Pressur relief valve AV 角阀BV 呼吸阀Breather valve6NV 针形阀Needle valve#DV 隔膜阀SPR 气液分离器Separator SGV 插板阀TWV 三通阀FA 阻火器Flame arrester$SR 过滤器Strainer$SRY Y型过滤器Y-typestrainer9 SRT T型过滤器T-type strainer SRB 桶式过滤器Bucket type strainer TSR 临时过滤器Temporary strainer5 SIL 消声器Silencer SG 视镜Slight glass(SC 取样冷却器Samplecooler DF 排液漏斗Drain funnel LM 管道混合器Line mixer RO 限流孔板Restrictionorifice MO 混合孔板Mixing orifice RD 爆破片（爆破膜）Rupture disk&EJ 补偿器Expansion joint INS 隔热Thermal insulation H 保温Hot insulation C 保冷Cold insulation, X P 防烫伤隔热Personnel protectioninsulation4T&I 伴热Tracing ａnd insulation管道伴热（冷）Tracing"EST 蒸汽外伴热External steam tracing IST 蒸汽内伴热Internal steam tracing SJT 蒸汽夹套伴热Steam-jacket tracing ET 电伴热Electric tracing M 金属材料Metallic material CS 碳钢Carbon steel CAS 铸钢Cast steel!FS 锻钢Forged steel AS 合金钢Alloy steel$ SS 不锈钢Stainless steel AUSTSS 奥氏体不锈钢Austenitic CI 铸铁Cast ironstainless-steel4MI 可锻铸铁Malleable iron DI 球墨铸铁Ductile iron AL 铝Aluminum BRS 黄铜Brass BRZ 青铜Bronze1CU 紫铜Copper LAS 低合金钢Low alloy steel FLAS 低合金锻钢Forged low alloy steel4CLAS 低合金铸钢Castlow alloy steel+ THK 壁厚Thickness SCH 表号Schedule number STD 标准Standard XS 加强Extra strong XXS 特强Double extra strong E 东East&CN 建北Construction north W 西West S 南South N 北North H 水平Horizontal+V 竖直、铅直、直立Vertical GRD 地坪Ground UG 地下Underground%BL 装置边界线Batterylimit lineESEW 事故沐浴洗眼器Emergency showerａnd eye washer HS 软管站Hose station ML 接续分界线MatchlinePS 管道支架（管架）Piping support PR 管桥Pipe rack8STRU 构架（构筑物）Structure2 L BLDG 建筑物Building PD 清扫设施Purge device PT 池Pit SHLT 棚Shelter4COFF 围堰Cofferdam FL 楼板FloorPF 平台Plateform0EL 标高Elevation BOP 管底Bottom of pipe COP 管中心Center of pipe TOP 管顶Top of pipe FOB 底平Flat on bottom FOT 顶平Flat on top CL（屯）中心线Center line TL 切线Tangent lineSYM 对称的Symmetrical BOS 支架底Bottom of support TOS 支架顶Top ofsupport CL 净距（净空）Clearance I CTC 中心至中心Center to center CTF 中心至面Center toface CTE 中心至端部Center to end ETE 端到端End to end.FEF 法兰端面Flange ａnd face& FTF 面到面Face to face D 直径Diameter ID 内径Inside diameter OD 外径Outside diameter DN 公称直径Nominal diameter! Y DIM 尺寸Dimension MAX 最大Maximum MIN 最小Minimum%AVG 平均Average APP 约、近似Approximate7PT.EL 点标高Point elevation PFD 工艺流程图Processflow diagramPID 管道和仪表流程图Piping & instrumentdiagramCOD 接续图Continued on drawing DTL 详图Datail)SPDWG（ISODWG）管段图Spool drawing （each line isometric drawing）DWGNO 图号Drawing number DWGI 所在图号DrawingidentificationLOW 材料表List of material, v MTO 汇料Material take-off APPX 附录Appendix6JOB. No. 工号Job Number BEDD 基础工程设计数据Basicengineering design data REV. No. 修改号RecisionnumberREF DWG 参考图Reference drawing DEDD 详细工程设计数据Detailengineering design data ;SC 采样接口Sample connectionAUT 自动Automatic ML 手动Manual control CHOP 链条操作Chainoperated!CSC 铅封关Car seal close CSO 铅封开Car seal open LC 锁闭Lock closedLO 锁开Lock open6NC 正常关Normally close NO 正常开Normallyopen6 ATM 大气压Atmosphere( {PN 公称压力Nominal pressure A 绝压G 表压（T）温度Temperature（P）压力Pressure' .W 焊接Welding AW 电弧焊Arc welding GSAW 气体保护电弧焊Gas shielded-acr welding EFW 电熔焊Elecric fusion welding ERW 电阻焊Electric Resistance welding GW 气焊Gas welding LW 搭接焊Lap welding BW 对焊Butt welding TW 定位焊Tack welding SW 承插焊Socket welding CW 连续焊Continuous welding SEW 密封焊Seal welding SFG 堆焊Surfacing FW 现场焊接Field welding HT 热处理Heattreatment' PH 预热Preheating SR 应力消除Stress relief*PWHT 焊后热处理Postweld heat treatmentEIT 检查、探伤和实验Examination, inspection& testing VE 外观检查Visual examination UI （UT）超声探伤Ultrasonic inspection（test）RI （RT）射线探伤Radiographic inspection（test）MPI （MT）磁粉探伤Magnetic particleinspection （test）LPI （PT）液体渗透检验Liquid penterant inspection（test）HADT 硬度实验Hardness testing HYDT 水压实验Hydraulic testing PNET 气压实验Pneumatic testing 焊条Covered electrode WW 焊丝Welding wire ASSY 装配、组合Assembly2F 现场Field F/F 现场制造Field faricated. @SF 现场决定Suit in field,CSP 冷紧Cold spring BCT 螺栓冷紧Bolt cold tightening BHY 螺栓热紧Bolt hottightening CO 清洗口Clean out ANNY 退火Annealed0PE 平端面Plain end BE 坡口端Belelled end THR 螺纹Thread3HB 布氏硬度Brinnelhardness RC 洛氏硬度FDN 基础Foundation REF 参考Reference INF 信息（资料）Information REV 修改Revision SEQ 序号（顺序）SequenceW/E 设备带来With equipment W/I 仪表带来With instrument CM 色标Colour mark+ CA 腐蚀裕度Corrosion allowance8UTL 公用系统Utility UC 公用工程接头Utilityconnection( QTY 数量Quantity WT 重量Weight7MHR 工时Man hour BC 螺栓分布圆Bolt circle3HP 高点High point+LP 低点Low point SUC 吸入（口）Suction DIS 排出（口）Discharge SO 蒸气吹扫（口）SteamoutNPT 美国标准锥管螺纹National standardtaper pipe thread NPS 美国标准直管螺纹National standardstraight pipe threadDR 排液DrainVT 放气Vent, ^RTG （压力）等级Rating CL 等级Class SMLS 无缝Seamless90°ELBOW,BW,20#,SMLS,LR,GB/T8163,SH/T3408,GrⅠ,Sch4090度弯头，对焊，20#碳钢材质，无缝，制造标准GB/T8163 ，验收标准SH/T3408，质量等级1级，SCH40是ASME壁厚表示方式三通1 1/2"*3/4" SW SCH80 20 GB/T14383(I)是什么意思异径三通 1 1/2"*3/4" SW(承插焊) SCH80(厚度，查询可得知具体厚度) 20（材质，20#碳钢）GB/T14383(I)（标准号）其中GALV和LR 代表什么意思？" SWAGE NIPPLE 90 ELBOW 20# GALV SMLS GB/T8163,LR BW:SH3408 SCH80中PBE:MSS SP-95 是什么意思？20# GB8163 PBE:MSS SP-95 SCH80其中红颜色的字SPIRAL WOUND GASKET CL150 RF ,4.5MM, 304+GRAF ,344 INNERRING,CS OUT RING: SH3407母代表什么意思？20＃GB/T699 SW 平底形40T025/01 SCH160 中的红颜色的字母代表什么意思？35CRMOA,SH3404 其中红颜色的字母代表什么意思？螺柱/螺母STUD BOLT WITH 2 HEAVY NUTS,35CRMOA/以上表示的字母可以在哪里查到啊GALV英文为galvanized是镀锌的意思，一般是仪表风管线和水管线。

NEC错误代码中英文对照表

Error Error message Description1Lamp Door Open Lamp door (cover) is open.2Lamp mp temperature is abnormal.4GPSU(12V) Fail Power supply(12V) is abnormal.5Lamp Unlit Lamp doesn’t light up.6House OverTime Lamp house cumulative time is over.8LPSU OverTemp.Temperature (lamp power inside temperature) isabnormal.12E2PROM R Fail(SYS:Param1KEY:Param2DIV:Param3)E2PROM data read error is detected.Param 1/2/3:I2C: I2C errorCRC : CRC error13Interlock Fail Interlock error is detected.15E2PROM W Fail(SYS:Param1KEY:Param2DIV:Param3)E2PROM data write error isdetected.Param 1/2/3:I2C: I2C errorError Code of Series 2 for Control 号：Donview-000517Pump Stop(Param1)Stopped for pump error.Param1: Rotating Speed(Decimal)120DLP Ack Fail(Param1, Param2)ICP board failed the operation. Param1: 2nd portion of ICP command. Param2: 3rd portion of ICP command. ICP failed operation to the command, “CMD1,Param1, Pram2, …”.121Lens Fail(Param1)(Param2,Param3)Lens unit control error(NC1200/NC2000)Param1: Detailed error informationas followsEEPROM R/W FailV-Sensor Read FailH-Sensor Read FailComm Send FailComm Recv FailComm TimeoutRestart(In this case, no Param2/3)Param2/3: Lens unit controlparameters.123Bulb OverTime Lamp bulb cumulative time is over.125LPSU Fail(Param1)LPSU Fail(Param1, Param2)LPSU communication error.LPSU is on abnormal status.Param1:“No Lamp” :Never communicationswith LPSUafter AC-ON.“Power”: Communication failduring regularLPSU status check.Communication error with LPSUoccurs.Param1:Failed LPSU command codeParam2: Error type“ErrTx”, “ErrRx”, “Tout”, “ErrCmd”128OutRange(Param1, Param2,Param3, Pram4)Adjusting lamp output value has setout of range.Param1: Caused operationLamp M: Manual adjustmentLamp D: Douser operationLamp FW: FeedBack(to keep watt)processLamp FB: FeedBack(to keepilluminance)processLamp LM: Lamp memory processParam2: Lamp current tried to setby projector(in 0.1A)Param3: Lamp current get from LPSU(in A)Param4: Lamp wattage get from LPSU(in W)129Down Lamp Power(Param1,Param2, Param3)Down lamp power to decrease setinsidetemperature.Param1: Measured point(Out/Intake/Exhaust/DMD-B)Param2: Temperature(in deg)Param3: Lamp outputLamp current (in 0.1A)130MMS CommFail(Param1:Param2:Param3)MMS communication error isdetected.Param1: Failed MMS command codeParam2: Error type (“Con”, “Tx”, “Rx”, “Tout”)Param3: Error code131MMS Fan Stop Built-in MMS fan has stopped. 132MMS Fail Built-in MMS internal error.133MM Reset (Command:Param1)Executed to reset Built-in MMS Param1: When executed to resetBuilt-in MMS.001: Executed to reset Built-in MMS when nocommunications between projector main system and MMS.T-001: Executed to reset Built-in MMS when nocommunication between external projector and MMS.140DLP CommRFail(Param1Param2Param3:Param4)Communication failure with the ICPboard.(Communication I/F is RS-232C)Param1: First portion of ICPcommand.Param2: Second portion of ICPcommand.Param3: Third portion of ICPcommand.Param4: Error type (“Con”, “Tx”, Rxn”, “Nack”,“Tout”)e.g.) DLP CommRFail(010203:Nak=0001H)ICP returns “NAK” response to thecommand, “01,02, 03, …”.132MMS Fail Built-in MMS internal error.141DLP CommEFail(Param1Param2Param3:Param4)Communication failure with the ICPboard.(Communication I/F is Ethernet)Param1: First portion of ICPcommand.Param2: Second portion of ICPcommand.Param3: Third portion of ICPcommand.Param4: Error type (“Con”, “Tx”, Rxn”, “Nack”,“Tout”)e.g.) DLP CommRFail(010203:Nak=0001H)ICP returns “NAK” response to thecommand, “01,02, 03, …”.145SensorFail OutsideAir(Param1)Sensor (Outside Air) read error.Param1: Get/SetFailed to get/set data from/tosensor board.146SensorFail LPSUIntake(Param1)Sensor (LPSU Intake) read error.Param1: Get/SetFailed to get/set data from/tosensor board.147SensorFail Exhaust(Param1)Sensor (Exhaust) read error. Param1: Get/SetFailed to get/set data from/to sensor board.148SensorFail DMD-B(Param1)Sensor (DMD-B) read error. Param1: Get/SetFailed to get/set data from/to sensor board.150Fan0 Stop(Param1) 151Fan1 Stop(Param1)152Fan2 Stop(Param1) 153Fan3 Stop(Param1) 154Fan4 Stop(Param1) 155Fan5 Stop(Param1)Fan0 has stopped.Param1: Rotating Speed(Decimal)156Fan6 Stop(Param7)Fan0 has stopped.Param1: Rotating Speed(Decimal)157Fan7 Stop(Param8)158Fan8 Stop(Param9)159Fan9 Stop(Param10)160GPSU Fan Stop GPSU Fan has stopped.162Lamp Fan0 Stop(Param1)Lamp cooling fan0 has stopped. Param1: Rotating Speed (Decimal) or HW Prt(Hardware protection)165Lamp Fan1 Stop(Param1)Lamp cooling fan1 has stopped. Param1: Rotating Speed (Decimal) or HW Prt(Hardware protection)164ICP Fan Stop(Param1)ICP fan has stopped.Param1: Rotating Speed(Decimal)165GPI MACRO(n) SelectionInvalidSelection of preset button (n)through GPI is invalidbecause metadata is enabled.n: Preset Button Number(1-8)166GPI Control(Param1) InvalidProjector control through GPI isinvalid becauseprojectoris busy.Param1: Canceled GPI control:Lamp Off/ On , Mute Off/ On/Power On/OffSelection of preset button n (n=18)170OverTemp.Outside Air(Param1)Set inside temperature (Outside Air) is abnormal.Param1: Temperature(in deg) Fan7 has stopped. (Only forNC3200S)Param1: Rotating Speed(Decimal)171OverTemp.Precaution(Param1)Set inside temperature(LPSU Intake) is close to overtemperature.Param1: Precaution temperature(in deg)172OverTemp.Exhaust(Param1)Set inside temperature (Exhaust) is abnormal.Param1: Temperature(in deg)173OverTemp.DMD-B(Param1)Set inside temperature (DMD-B) is abnormal.Param1: Temperature(in deg)174Bulb Entry No selection of current bulb.177Tamper Fail(Param1)Service door tamper switch of projector is open.Param1 : Location of tampering switch.(Param1 is encrypted)LCD: Decrypted while projector is service mode orhigher.Log: Decrypted to view while DCC is servicemode or higher.178Marriage Tamper Fail(Param1)Marriage tamper switch of projector is open.Param1 : Location of tampering switch.(Param1 is encrypted)LCD: Decrypted while projector is service mode orhigher.Log: Decrypted to view while DCC is servicemode or higher.180CPU Fail(Mem) Param1:Param2<->Param3System Test Failed.(Memory)Param1-3: Detailed Test results.187GPSU(24V) Fail Power supply is abnormal.(24V)201Error Log Write Fail Failed to store logs into projector system.210Unknown LPSU Model(Param1)Unexpected LPSU is attached. Param1: Unexpected LPSU Product Model211LPSU Fan Stop LPSU fan has stopped.21312V Outside range(Param1)12V supply is out of range.Param1: Captured voltage value.LCD: invalidLog : valid21424V Outside range(Param1)24V supply is out of range.Param1: Captured voltage value.LCD: invalidLog : valid215Lamp Filter Time Over(Param1)The time to exchange lamp filter. (Future use)Param1: usage hours216Body Filter Time Over(Param1)The time to exchange body filter. (Future use)Param1: usage hours220AC On Fan Exchange Time The time to exchange Fan(AC On) 221Power On Fan Exchange Time The time to exchange Fan(Power On) 222Lamp Fan Exchange Time The time to exchange Lamp Fan230Router Fail(Param1)Failed to control router.Param1:“Connect” : Failed to connect to router“Tx” : Transmit error“Rx” : Receive error“Tout” : Communication timeout “Msg Format” : Unexpected data received“Data”: No data to setup router “Verify”: Setting verify error231SensorFail Opt Failed to control light sensor.232MAC Write Fail Failed to setup MAC address of CPUboard.233Illegal MAC Address Router WAN MAC address is illegal.235Router Self Check Fail(Param1, Param2, Param3)Router health-check error.Param1 : Health check error timing“INIT”: After AC-ON“STBY”: During standby“ RUN”: During power-onParam2: Health check result“2”: Factory default“3”: No responses(Dead lock orsomething)“4”: Unstable status“5”: Factory default and unstablestatus“6”: Defective(possibly “2” to“5”)Param3: router response result(Valid when Param2 is “4” and “5”)N of 4 ping responses240SIB CommFail(Param1Pram2Param3Param4)Failed to communicate with SIB.Param1:“Connect”, “Tx”, “Rx”, “Nack”, “Tout”Param2: First portion ofSIBcommand.Param3: Second portion of SIBcommand.Param4: Third portion of SIBcommand.When Param1 is “Nack”, nack datais added afterParam4.e.g.) SIB Comm241SIB Error(Param1)SIB internal error.Param1: SIB internal error status “FPGA Open”: Failed to openserial I/F“FPGA Tx:nnn”: FPGA send error (nnn: failed send command)“FPGA Rx:nnn”: FPGA receive error (nnn: failed receive command)“MEM Open”: Device driver open error“MEM Read”: Device driver read error242SIB FPGA Reboot Executed to re-boot SIB FPGA for recovery.246Fan11 Stop(Param1)Fan11 has Stopped (NC3240) 250Fan0 Stop Precaution(Param1)251Fan1 Stop Precaution(Param1)252Fan2 Stop Precaution(Param1)253Fan3 Stop Precaution(Param1)254Fan4 Stop Precaution(Param1)255Fan5 Stop Precaution(Param1)256Fan6 Stop Precaution(Param1)257Fan7 Stop Precaution(Param1)258Fan8 Stop Precaution(Param1)259Fan9 Stop Precaution(Param1)260Lamp Fan0 StopPrecaution(Param1)Lamp Fan0 Stop PrecautionParam1: Rotating Speed(Decimal)261Lamp Fan1 StopPrecaution(Param1)Lamp Fan1 Stop PrecautionParam1: Rotating Speed(Decimal)262Pump Stop Precaution(Param1)Pump Stop PrecautionParam1: Rotating Speed(Decimal)Fan0~9 Stop PrecautionParam1: Rotating Speed(Decimal)263ICP Fan StopPrecaution(Param1)ICP Fan Stop Precaution265Fan11 Stop Precaution(Param1)Fan11 Stop Precaution (NC3240) Param1: Rotating Speed(Decimal)270SD Tamper Terminate(Param1)Terminated service door tamper event latched byEnigmaboard.LCD: Not supportedLog: Supported271IMB:SD TamperTerminate(Param1)Terminated service door tamperevent latched byIMB.LCD: Not supportedLog: Supported280Bulb Warranty Over Bulb warranty time over 301System Error302Self Test Error303Install Release Package Error304Load Release Package Error305Key Error306Certificate Error317ICP Normal Configuration318ICP Boot Configuration Error319FMT Normal Configuration Error320FMT Boot Configuration Error321FMT Satellite Configuration Error3221.20V Supply out of range 3231.80V Supply out of range 3242.50V Supply out of range 3253.30V Regulator out of range326ICP FPGA Temperature out of range327FMT FPGA Temperature out of range328ICP Flash Update Error329FMT Sequence Data File Mismatch330FMT DMD Data File Mismatch331FMT Flash Checksum Error -Sequence Data332FMT Flash Checksum Error -DMD Data333Satellite Hardware Mismatch 334FMT Flash Update Error335Red Satellite Reports Reset336Red Satellite Serial Link Error337Red Satellite Firmware Configuration Error338Red DAD1000 Bias Under Voltage Error339Red DAD1000 Reset Under Voltage Error340Red DAD1000 Offset Under Voltage Error341Red DAD1000 Thermal Shutdown Error342Green Satellite Reports Reset343Green Satellite Serial Link Error344Green Satellite Firmware Configuration Error345Green DAD1000 Bias Under Voltage Error346Green DAD1000 Reset UnderVoltage ErrorICP board error347Green DAD1000 Offset Under Voltage Error348Green DAD1000 Thermal Shutdown Error349Blue Satellite Reports Reset350Blue Satellite Serial Link Error351Blue Satellite Firmware Configuration Error352Blue DAD1000 Bias Under Voltage Error353Blue DAD1000 Reset Under Voltage Error354Blue DAD1000 Offset Under Voltage Error355Blue DAD1000 Thermal Shutdown Error356RTC Error400Enigma CommFail(Param1Param2Param3:Param4)No communication with the Enigmaboard.Param1: First portion of Enigmacommand.Param2: Second portion of Enigmacommand.Param3: Third portion of Enigmacommand.Param4: Error Type“Conn=x”, “Tx”, “Rxn”, “Nack=xxxxH”,“Tout=xxxx”410System Error Enigma Status error411Self Test Error412Install Release Package Error413Load Release Package Error414TI Login List Package ErrorEnigma Status error415Security Officer Login List Package Error419Certificate or Key Error 420ICP Communications Status 426User Loader Integrity Error427Main Application Integrity Error428RNG Hardware Integrity Error 429DRNG Algorithm Integrity430RSA Algorithm Integrity Error431AES Algorithm Integrity Error 432HMAC Algorithm Integrity433SHA Algorithm Integrity Error 434TLS Integrity Error435FPGA Configuration Integrity Error436FPGA CineLink 2 Decryption Integrity Error437RTC Error442FPGA Configuration Error443FPGA Temperature out of range446RNG Hardware Duplicate Output Error447DRNG Algorithm Duplicate Output Error4501.20V Supply out of range 4511.80V Supply out of range 4522.50V Supply out of range 4533.30V Regulator out of range458SelfTest User Loader Integrity Error459SelfTest Main Application Integrity Error460SelfTest RNG Hardware Integrity Error461SelfTest DRNG Algorithm Integrity Error462SelfTest RSA AlgorithmIntegrity Error Enigma Status errorEnigma Status errorEnigma is in FIPS errorstate.(Integrity check error)Enigma Status errorEnigma is in FIPS errorstate.(Integrity check error)463SelfTest AES Algorithm Integrity Error464SelfTest HMAC Algorithm Integrity Error465SelfTest SHA Algorithm Integrity Error466SelfTest TLS Integrity Error467SelfTest FPGA Configuration Integrity Error468SelfTest FPGA CineLink. 2 Decryption Integrity Error474Security Tamper475Top Side Security Enclosure Open476Bottom Side Security Enclosure Open477Security Battery Event Battery tamper condition exists.478Software CommandedZeroizationDestroyed Enigma key by softwarecommand.481Security Enclosure Not Armed Enigma security not armed.482Physical Marriage Tamper Latched physical marriage tamper condition on Enigma board483Logical Marriage Tamper Logical marriage tamper condition exists.484Marriage NOT Active Marriage has NOT been established (active).486Service Door Tamper Latched service door tamper condition on Enigma board487Security Log ErrorSecurity log is full.488Security Battery Low Warning Close to “Security Battery Low”. 489Security Log Warning Close to “Security Log Error”.500IMB Comm Fail(Param1Param2Param3:Param4)No communication with the IMB.510IMB:System Error511IMB:Self Test Error519IMB:Certificate or Key Error Enigma Status errorSecurity tamper condition exists. IMB Status error520IMB:ICP Communications Status IMB fails to do logical marriage to ICP when IMBpowersup. Because of no communications with ICPduring537IMB RTC is “invalid”IMB RTC is “invalid”543IMB:FPGA Temperature out of range550IMB:Supply voltage out of range574IMB:Security Tamper Security tamper condition exists in IMB577IMB:Security Battery Even Battery tamper condition exists in IMB581IMB:Security Enclosure NotArmedSecurity tamper condition exists inIMB582IMB:Physical Marriage Tamper Latched physical marriage tamper condition on583IMB：Logical Marriage Tamper Logical marriage tamper condition exists in IMB584IMB:Marriage NOT Active Marriage between ICP and IMB has NOT beenestablished (active).586IMB:Service Door Tamper Latched service door tampercondition on IMB588IMB:Security Battery LowWarningClose to “(577) IMB: SecurityBattery Event”IMB Status errortrol Command list Rev3.0 文档编Checking point1. Verify if the lamp door is closed and locked properly.2. Is there any physical damage in the switch?3. Check the connection between POCO on COVER PWB and POCN3 onPJDIVPWB.1. Check the ambient temperature. It should be 35 degC or lower.2. Check if there is any problem on suction air and exhaust air.3. Check the air filter and verify that it is not clogged.4. Check that the ventilation system is being operated withinrequired specification.5. Check the connection between Thermostat and POCN5 on PJDIV PWB.1. Check the DC power supply voltage.2. Check the connection between GPSU and POPSM on PJDIV PWB.1. Check if the current bulb usage time is over limit. If yes,replace the bulb.2. Check if there are loose screw connections on the igniter andcathode cable on thelamp holder.3. Check if an electric blackout has occurred.4. Check if the LPSU is turned on.5. Check the connection between POCN2 on PJDIV PWB and PEDE-A PWB.1. Replace the reflector and reset lamp (except for house) usagehours.1. Check the ambient temperature. It should be 35 degC or lower.2. Check if there is any problem on suction air and exhaust air.3. Check the air filter and verify that it is not clogged.4. Check that the ventilation system is being operated withinrequired specification.5. Replace the LPSU.1. Check CPU PWB/ PJDIV PWB/KEY I/O PWB.2. Check the cable between POIF on PJDIV PWB and KEY IO PWB.1. Verify that external control is working properly.2. Check the connection between POIL on PEDE-A PWB and INTER PWB.3. Check the connection between POCI on PEDE-A PWB and POCN2 onPJDIVPWB.1. Check CPU PWB/ PJDIV PWB/KEY I/O PWB.2. Check the cable between POIF on PJDIV PWB and KEY IO PWB.1. Check the connection between POCN5 on PJDIV PWB and the pump.2. Check the 12v voltage to control the pump.3. Check the coolant of the unit.1. Check if the ICP version is the latest.2. Launch the "Macro File Tools" to check if there are any problems with the ICPconfiguration files.3. Retry the projector operation.4. Reset the ICP board and retry the projector operation.5. Check the connection between FSB and MOTHER PWB.6. Check the power supply voltage for the ICP board.7. If new ICP board was installed, restore the setting data in icp cfg files in Relese1. Check the connection between POCN2 on PJDIV PWB and MOTOR I/F PWB.2. Replace the MOTOR I/F PWB.1. Check the usage time of lamp bulb and replace the lamp bulb if needed.2. Verify that New Entry Bulb Setting was set when the lamp bulb was replaced.3. Replace CPU PWB.LPSU Fail(No Lamp):1. Check if the LPSU is powered on.2. Check the connection of RS-232C cable between PEDE-A PWB and LPSU.3. Check the connection between POCN2 on PJDIV PWB and PEDE-A PWB. LPSU Fail(Power):1. Power-cycle the LPSU. If problem is not gone, replace the LPSU. LPSU Fail(Param1, Param2):1. Check if the LPSU is powered on.2. Check the connection of RS-232C cable between PEDE-A PWB and LPSU.3. Check the connection between POCN2 on PJDIV PWB and PEDE-A PWB.1. The requested lamp output adjustment is out of range.1. Check the ambient temperature. It should be 35 degC or lower.2. Check if there is any problem on suction air and exhaust air.3. Check the air filter and verify that it is not clogged.4. Check that the ventilation system is being operated within required specification.1. Check the connection between MM3000B and Mother PWB.2. Check LAN connectors and LAN cable.3. Check that the projector is powered on, and not in stand-by mode.1. Check fan cable connection.2. Replace FAN.In regard to MMS Fail, there are three types of errors as shown below.The respective methods of taking measures are described below.1) FPGA***This is a configuration error of FPGA. If the associated FPGA is of an inputboard, try to remount the board or check the flexible cable connections orreinstall the FPGA data.In the case of the other FPGA errors, also try to reinstall the FPGA data. Ifthis check is difficult to perform, replace the associated board completely.2) Default DataThe data contained some deficiency at the time of shipment from the factory.Reinstall the data.3) User DataThis error is caused by a certain deficiency in the user data. Copy the user data into the PC so that further checks can be made. Execute a factory default to see if the default signal data eliminates the problem.Since part of or all of the previously copied user data may have been corrupted,reuse of these data is not recommended.If the data is used for the purpose of setup data checks, they should be cleared later.1. This message shows that the projector reset the MM3000B because of no responsemessages.If MMS Comm Fail occurs, see the MM3000B service manual.1. If ICP is being updated by ICP & Enigma Control Program without "Special Mode",this message will be shown.2. If ICP is reset by ICP & Enigma Control Program, this message will be shown.3. Retry the projector operation.4. Reset the ICP board and retry the projector operation.5. Check the connection between FSB and MOTHER PWB.6. Check the power supply voltage for the ICP board.1. If ICP is being updated by ICP & Enigma Control Program without "Special Mode",this message will be shown.2. If ICP is reset by ICP & Enigma Control Program, this message will be shown.3. Retry the projector operation.4. Reset the ICP board and retry the projector operation.5. Check the connection between FSB and MOTHER PWB.6. Check the power supply voltage for the ICP board.1. Check the connection between T-SENSE PWB and POCN1 on PJDIV PWB.2. Check the TSENS PWB.1. Check the failed fan and replace failed fan.2. Check connector POCN5 on PJDIV PWB.For fan layout, see the appendix.1. When the projector is NC3200S, refer to items 2 to 4 item first.2. (NC3200S) Check the system log.3. (NC3200S) When the GPSU(24V) fail was occurred, update the firmware to releasepackage 2.31.4. (NC3200S) or temporary countermeasure is to re-start (cold start) the projector.5. Check the failed fan and replace failed fan.6. Check connector POCN5 on PJDIV PWB.For fan layout, see the appendix.1. Check the failed fan and replace failed fan.2. Check connector POCN5 on PJDIV PWB.For fan layout, see the appendix.1. Check the connection between POPSM on PJDIV PWB and GPSU.2. Check the connection between AC PWB and GPSU.3. Replace GPSU Fan.4. Check GPSU.1. Check the connection between Fan unit and POCN5 on PJDIV PWB. For fan layout, see the appendix.2. Check LED on driver PWB.3. Check the failed fan and replace the fan.1. Check the fan attached on CPU PWB.2. Replace fan.3. Replace CPU PWB.1. When the GPI title selection is requested during operation is not allowed,this message will be shown.1. When the GPI control is requested during when the projector is busy,this message will be shown.2. Check if there is any problem on suction air and exhaust air.3. Check the air filter and verify that it is not clogged.4. Check that the ventilation system is being operated within required specification.5. Check the connection TSENS PWB.1. Check the ambient temperature. It should be 35 degC or lower.2. Check if there is any problem on suction air and exhaust air.3. Check the air filter and verify that it is not clogged.4. Check that the ventilation system is being operated within required specification.5. Check the connection TSENS PWB.1. Setup the new bulb entry while the projector is in standby.1. Check the (Param1) which indicates which switch is activated.2. Check if the side covers and lens cover are closed properly.3. Check if the tamper switch lever is broken.4. Check the connection between TAMPER PWB and POCN2/POCN7 on PJDIVPWB.5. Check TAMPER PWB.If Param1=0, reseat Circuit Box.If Param1=1,1. Check if cover plate or option PWB is seated at option slot A.2. Check the connection between TAMPER PWB and PO6012 on PJDIV PWB.3. Check TAMPER PWB.4. Check if ICP PWB/SIB is seated on MOTHER PWB properly.1.Check the CPU PWB1. When the projector is NC3200S, refer to items 2 to 4 item first.2. (NC3200S) Check the system log.3. (NC3200S) When the GPSU(24V) fail was occurred, update the firmware to releasepackage 2.31.4. (NC3200S) or temporary countermeasure is to re-start ( cold start ) the projector.5. Check the DC power supply voltage.6. Check the connection between GPSU and POPSM on PJDIV PWB.1. Replace CPU PWB.1. Check if the proper LPSU is used.2. Replace LPSU.1. Check if the LPSU is powered on.2. Replace LPSU.1. Check the 12v line.2. Check the connection between GPSU and PO6010 on MOTHER PWB.1. When the projector is NC3200S, refer to items 2 to 4 item first.2. (NC3200S) Check the system log.3. (NC3200S) When the GPSU(24V) fail was occurred, update the firmware to releasepackage 2.31.4. (NC3200S) or temporary countermeasure is to re-start ( cold start ) the projector.5. Check the 24v line.6. Check the connection between GPSU and POP24 on PJDIV PWB.1. Change filters1. Replace AC On Fan(Fan6) and clear AC On Fan usage time.NC2000C/NC1200C1. Replace Power On Fan(Fan0..5 and 7) and clear Power On Fan usage time.NC3200S1. Replace Power On Fan(Fan0..5 and 7..9) and clear Power On Fan usage time.1. Replace Lamp Cooling Fan 0 and 1 and clear Lamp Cooling Fan usage time.1. If the router unit is replaced with a new one, execute "NewRouterSetup" forprojector use.2. Power-cycle the projector.3. Check the LAN cable connection between Router unit and MOTHER PWB.4. Execute Factory Default - LAN.5. (Old router )If the router firmware is Version1.3 Release01, update toVersion1.4 Release01.(NEC router)If the router firmware is 1.0.1 (BR-CP1400N), do not need to update the firmware ofrouter.1. Check the connection between POCN3 on PJDIV PWB and LSENS PWB.2. Check the LSENS PWB.1. Replace CPU PWB.1. Power-cycle the projector.2. Replace the Router unit and execute "NewRouterSetup."1. Check the connection of LAN cable.2. Check router.1. Check LAN cable between Router and Mother（PO6201）2. Check connection of between SIB PWB (IC1600,IC1604) and Mother PWB1. Check SIB PWB1. Check SIB PWBDetermine DC fan causing error and replace it with a new DC fan.1. Check tamper SW1. Change the lamp bulb to new one.1. Check connection between ICP PWB and Mother PWB.2. Check connection between SIB PWB and ENIGMA PWB.3. Check Firmware version of both SIB PWB and ENIGMA PWB.4. Check ICP board.1. Check connection between ICP PWB and Mother PWB.2. Check connection between SIB PWB and ENIGMA PWB.3. Check Firmware version of both SIB PWB and ENIGMA PWB.4. Check ICP board.1.Check ICP board.1. Check connection between ICP PWB and Mother PWB.2. Check connection between SIB PWB and ENIGMA PWB.3. Check Firmware version of both SIB PWB and ENIGMA PWB.4. Check ICP board.1. Check connection between ICP PWB and Mother PWB.2. Check Firmware version of both SIB PWB and ENIGMA PWB.3. Check ICP board.。

5E-01中文资料

Broadband TelCom Power, Inc. BTCPower TM Redefining “Current” Limits In Power Conversion BTCPower5E Series 25-30W DC-DC Converters Features• 30W Isolation output• 2:1 Input Range• Six-sided Shield• Remote On/Off Control• Efficiency To 82%• 200KHz switching frequencyModel Input Output Output Input Current % Efficiency Case Number Voltage Voltage Current No Load Full Load5E-01 5 VDC5000 mA30 mA 2700 mA775E-02 12 VDC2500 mA30 mA 3150 mA795E-03 15 VDC2000 mA30 mA 3150 mA795E-04 9-18 VDC ±12 VDC±1250 mA35 mA 3100 mA815E-05 ±15 VDC±1000 mA35 mA 3100 mA81 E 5E-06 5/±12 VDC3000/±625 mA35 mA 3200 mA785E-07 5/±15 VDC3000/±500 mA35 mA 3200 mA785E-08 +5/+12/-5 VDC3000/600/1000 mA30 mA 2940 mA775E-11 5 VDC5000 mA30 mA 1350 mA775E-12 12 VDC2500 mA30 mA 1550 mA815E-13 15 VDC2000 mA30 mA 1550 mA815E-14 18-36 VDC ±12 VDC±1250 mA30 mA 1500 mA845E-15 ±15 VDC±1000 mA30 mA 1500 mA84 E 5E-16 5/±12 VDC3000/±625 mA30 mA 1580 mA795E-17 5/±15 VDC3000/±500 mA30 mA 1560 mA805E-18 +5/+12/-5 VDC3000/600/1000 mA30 mA 1450 mA785E-21 5 VDC5000 mA30 mA 1350 mA785E-22 12 VDC 2500 mA15 mA 770 mA 815E-23 15 VDC 2000 mA15 mA 770 mA815E-24 36-72 VDC ±12 VDC ±1250 mA20 mA 750 mA84 E 5E-25 ±15 VDC±1000 mA20 mA 750 mA845E-26 5/±12 VDC3000/±625 mA20 mA 790 mA795E-27 5/±15 VDC3000/±500 mA20 mA 780 mA805E-28 +5/+12/-5 VDC 3000/600/1000 mA20 mA 725 mA78Note: Nominal Input Voltage 12, 24, 28 or 48VDCBroadband TelCom Power, Inc. –1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A. Tel.: 714-259-4888 • Fax: 714-259-0840• • Email: sales@ DS LP 5E Rev2 16-1-045E Series 25-30W DC-DC ConvertersBTCPower BTCPowerT MBroadband TelCom Power, Inc. – 1719 S. Grand Avenue, Santa Ana, CA 92705 U.S.A.Tel.: 714-259-4888 • Fax: 714-259-0840• • Email: sales@ DS LP 5E Rev2 16-1-04SpecificationsInput Specifications:Input Voltage Range…………….……12V……...………………..9-18V 24V……………………..18-36V 48V…………………......36-72V Input Filter………………………………………………………..Pi Type Output Specifications: Voltage AccuracySingle output………………………..…………………….+/- 1.0 % max. Daul output………………………………………………..+/- 3.0 % max. Triple, 5V………………………………………………….+/- 1.0 % max. 12V/15V/ -5V……………………………………..………+/- 3.0 % max. Voltage Balance ( Dual )………………………………...+/- 1.0 % max. External trim Adj. Range……………………………..…………+/- 10% Ripple & Noise, 20 MHz BW……………………….… 75 mV p-p max. Temperature Coeffcient………………………… +/- 0.02 % / ºC max. Short Circuit Protection………………………………..……Continuous Line Regulation ¹ Single / Dual Output………….……..+/- 0.2 % max. Triple………………………….………..+/- 1.0% max. Load Regulation ² Single / Dual Output…………….….+/- 1.0 % max. Triple………………………..…………+/- 5.0 % max. General Specifications :Efficiency………………………………………………..……..see table Isolation Resistance…………………………………………..100Mohm Switching Frequency……………………………………..200 KHz, min.Operating Temperature Range…………………………-25ºC ~ +71ºC Case Temperature………………………………………….100 ºC max. Cooling……………………………………………….Free air convection Storage Temperature Range……………………..…..-55 ºC ~ +105ºC Isolation Voltage………………………….………………..500VDC min. EMI/RFI…………………………………….....Six-sided continus shield Dimensions…………………2.65” x3” x 0.83 “(65 x 76.2 x 21.1 mm) Case Material……..Black Coated Copper with Non-conducted baseTriple output loading tableOuput Voltage Amperes (pin no.)(V) Min. (2) Nom. 6 +5 0.25 1.5 3 & 5 +12 or -12 0.1 0.31 3 & 5 +15 or -15 0.1 0.25 3 & 5+12 or -50.1/0.1 0.31/0.5Note: 1. measured from high lin to low line2. measured from full load to ¼ load3. maximum total power from all outputs is limited to 25/30W but no output should be allowed to exceed its maximum current4. minmum current on each output is required to maintain specified regulationOutline Information and Pin-outPin ConnectionPin Single Dual Triple 1 +Input +Input +Input 2 -Input -Input -Input 3 No pin +Output+Output 4 Trim Common Common 5 No pin -Output -Output 6 +Output No pin +5V output 7 -OutputNo pin No pin 8 Remote On/Off ControlRemote On/Off ControlLogic compatibility CMOS or Open collector TTL E c-0n >5.5 Vdc or open circuit E c-Off <1.8 Vdc Shutdown Idle current 10mA Input resistance 100K ohms (Ein 0Vdc to 9Vdc) Control common referenced to Input minus External Output TrimmingOutput may optionally be externally trimmed (+/-10%) with a fixed resistor or an external trimpot as shown.。