N101N6-L02 Ver0.0

Tentative TFT LCD Tentative SpecificationTentativeCONTENTSREVISION HISTORY -------------------------------------------------------31. GENERAL DESCRIPTION -------------------------------------------------------41.1 OVERVIEW1.2 FEA TURES1.3 A PPLICA TION1.4 GENERA L SPECIFICA TIONS1.5 MECHA NICA L SPECIFICA TIONS2. ABSOLUTE MAXIMUM RATINGS -------------------------------------------------------52.1 ABSOLUTE RATINGS OF ENVIRONMENT2.2 ELECTRICA L A BSOLUTE RA TINGS2.2.1 TFT LCD MODULE2.2.2 BA CKLIGHT UNIT3. ELECTRICAL CHARACTERISTICS -------------------------------------------------------73.1 TFT LCD MODULE3.2 BACKLIGHT UNIT4. BLOCK DIAGRAM -------------------------------------------------------114.1 TFT LCD MODULE5. INPUT TERMINAL PIN ASSIGNMENT -------------------------------------------------------125.1 TFT LCD MODULE5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL5.3 COLOR DATA INPUT ASSIGNMENT5.4 EDID DATA STRUCTURE6. CONVERTER SPECIFICATION --------------------------------------------------18 6.1 INPUT CONNECTOR PIN ASSIGNMENT6.2 INPUT ELECTRICAL CHARACTERISTICS OF CONVERTER7. INTERFACE TIMING -------------------------------------------------------197.1 INPUT SIGNAL TIMING SPECIFICATIONS7.2 POWER ON/OFF SEQUENCE8. OPTICAL CHARACTERISTICS -------------------------------------------------------218.1 TEST CONDITIONS8.2 OPTICA L SPECIFICA TIONS9. PRECAUTIONS -------------------------------------------------------259.1 HA NDLING PRECA UTIONS9.2 STORA GE PRECA UTIONS9.3 OPERA TION PRECA UTIONS10. PACKING -------------------------------------------------------26 10.1 CARTON10.2 PALLET11. DEFINITION OF LABELS -------------------------------------------------------2811.1 CMO MODULE LABEL11.2 CARTON LABELTentative REVISION HISTORYVersion Date Page(New)Section DescriptionVer 0.0 JULY. 08, 2008 All All Tentative specification first issued.Tentative1. GENERAL DESCRIPTION1.1 OVERVIEWN101N6-L02 is a 10.06” TFT Liquid Crystal Display module with LED Backlight unit and 40 pins LVDS interface. This module supports 1024 x 576 Wide-SVGA mode and can display 262,144 colors.The optimum viewing angle is at 6 o’clock direction. The converter module for Backlight is built in.1.2 FEATURES- Thin and Light- WSVGA (1024 x 576 pixels) resolution- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock- Build in LED Converter1.3 APPLICA TION- TFT LCD Notebook1.4 GENERAL SPECIFICATI0NSNoteUnit Item SpecificationActive Area 222.72 (H) x 125.28 (V) (10.06” diagonal) mm(1)Bezel Opening Area 226.34 (H) x 128.1 (V) mmDriver Element a-si TFT active matrix - -Pixel Number 1024 x R.G.B. x 576 pixel -Pixel Pitch 0.2175 (H) x 0.2175 (V) mm -Pixel Arrangement RGB vertical stripe - -Display Colors 262,144 color -Transmissive Mode Normally white - -Surface Treatment Hard coating (3H), Glare - -1.5 MECHANICAL SPECIFICATIONSUnitMax.NoteItem Min.Typ.Horizontal(H) 234.5 235.0 235.5 mm(1)Module SizeVertical(V) 142.5 143.0 143.5 mmThickness(T) - 4.9 5.2 mmg Weight -190180Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.Tentative 2. ABSOLUTE MAXIMUM RATINGSTentative2.2 ELECTRICAL ABSOLUTE RATINGS2.2.1 TFT LCD MODULEValueUnit Note Item SymbolMin. Max.Power Supply Voltage V CC -0.3 +4.0 V(1)Logic Input Voltage V IN -0.3 V CC+0.3 VNote (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions.2.2.2 BACKLIGHT UNITValueUnit Note ItemMin Max.LED Light Bar Power Supply Voltage -5 * 10 (3.4 * 10) V DC(1), (2)LED Light Bar Power Supply Current -- 30 * 3 mA DCNote (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal OperatingConditions.Note (2) Specified values are for LED (Refer to Section 3.2 for further information).Tentative 3. ELECTRICAL CHARACTERISTICSTentativeTentative Note (5) The parameters of LVDS signals are defined as the following figures.Tentative3.2 BACKLIGHT UNITTa = 25 ± 2 ºCValueParameter Symbol Min. Typ. Max.Unit NoteLED Quantity 30PCS (1) LED Light Bar PowerSupply VoltageVo 30 32 34 VLED Light Bar PowerSupply CurrentIo 48 52.5 75 m A(1) (Duty 100%)Power Consumption Po 1.58 1.68 1.79 W (2)(@I 0=52.5mA)LED Life Time L BL 12000 - - Hrs (3) Note (1) LED current is measured by utilizing a high frequency current meter as shown below:Note (2) P O = I O ͪV ONote (3) The lifetime of LED is defined as the time when it continues to operate under the conditions atTa = 25 ̈́2o C and I = 17.5 mA(Per EA) until the brightness becomes Љ 50% of its original value.310Tentative4. BLOCK DIAGRAM4.1 TFT LCD MODULETentative5. INPUT TERMINAL PIN ASSIGNMENT5.1 TFT LCD MODULEPin Symbol Description Polarity Remark1 NC No Connection (Reserve)2 VDD Power Supply (3.3V typ.)3 VDD Power Supply (3.3V typ.)4 VEDID DDC 3.3V power5 NC No Connection (Reserve for CMO test)6 CLKEDIDDDCclock7 DA TA EDIDDDCdata8 Rxin0- LVDS differential data input Negative9 Rxin0+ LVDS differential data input PositiveR0-R5, G010 VSSGround11 Rxin1- LVDS differential data input Negative12 Rxin1+ LVDS differential data input PositiveG1~G5, B0, B113 VSSGround14 Rxin2- LVDS Differential Data Input Negative15 Rxin2+ LVDS Differential Data Input PositiveB2-B5,HS,VS, DE16 VSSGround17 RxCLK- LVDS differential clock input18 RxCLK+ LVDS differential clock input19 VSSGround20 NC No Connection (Reserve)21 NC No Connection (Reserve)22 VSSGround23 NC No Connection (Reserve)24 NC No Connection (Reserve)25 VSSGround26 NC No Connection (Reserve)27 NC No Connection (Reserve)28 VSSGround29 NC No Connection (Reserve)30 NC No Connection (Reserve)31 VSSLEDGround32 VSSLEDGround33 VSSLEDGround34 NC No Connection (Reserve)35 PWM LED BLU Brightness Control (+3.3V Swing)36 LED_ENLEDConverterEnable (+3.3VInput)37 NC No Connection (Reserve)38 VLED LED Converter Input Power (7~20V)39 VLED LED Converter Input Power (7~20V)40 VLED LED Converter Input Power (7~20V)Note (1) Connector Part No.: IPEX-20455-040E-12 or equivalentNote (2) User’s connector Part No: IPEX-20453-040T-01 or equivalentNote (3) The first pixel is odd as shown in the following figure.TentativeTentative5.3 COLOR DATA INPUT ASSIGNMENTThe brightness of each primary color (red, green and blue) is based on the 6-bit gray scale datainput for the color. The higher the binary input the brighter the color. The table below provides theassignment of color versus data input.Data SignalRed Green Blue ColorR5 R4 R3R2R1R0G5G4G3G2G1G0 B5 B4 B3B2B1B0Basic Colors BlackRedGreenBlueCyanMagentaYellowWhite111111111111111111111111111111111111111111111111111111111111111111111111Gray Scale Of Red Red(0)/DarkRed(1)Red(2)::Red(61)Red(62)Red(63)::111::111::111::1111::111::11::::::::::::::::::::::::Gray Scale Of Green Green(0)/DarkGreen(1)Green(2)::Green(61)Green(62)Green(63)::::::::::::::111::111::111::1111::111::11::::::::::::Gray Scale Of Blue Blue(0)/DarkBlue(1)Blue(2)::Blue(61)Blue(62)Blue(63)::::::::::::::::::::::::::111::111::111::1111::111::11Note (1) 0: Low Level Voltage, 1: High Level VoltageTentative5.4 EDID DATA STRUCTUREThe EDID (Extended Display Identification Data) data formats are to support displays as defined in the VESA Plug & Display and FPDI standards.Byte # (decimal) Byte #(hex)Field Name and CommentsValue (hex)Value (binary) 00 Header 00 000000001 1 Header FF 111111112 2 Header FF 111111113 3 Header FF 111111114 4 Header FF 111111115 5 Header FF 111111116 6 Header FF 1111111177 Header 00 0000000088 EISA ID manufacturer name (“CMO”) 0D 0000110199 EISA ID manufacturer name (Compressed ASCII) AF 10101111100A ID product code (N101N6-L02) 020000001011 0B ID product code (hex LSB first; N101N6-L02) 1000010000120C ID S/N (fixed “0”) 00 00000000130D ID S/N (fixed “0”) 00 00000000140E ID S/N (fixed “0”) 00 00000000150F ID S/N (fixed “0”) 00 000000001610 Week of manufacture (fixed week code) 2C 001011001711 Year of manufacture (fixed year code) 12 000100101812 EDID structure version # (“1”) 01 000000011913 EDID revision # (“3”) 03 000000112014 Video I/P definition (“digital”) 80 100000002115 Max H image size (“22.272cm”) 16 000101102216 Max V image size (“12.53cm”) 0C 000011002317 Display Gamma (Gamma = ”2.2”) 78 011110002418 Feature support (“Active off, RGB Color”) 0A000010102519 Rx1, Rx0, Ry1, Ry0, Gx1, Gx0, Gy1, Gy0 CF11001111261A Bx1, Bx0, By1, By0, Wx1, Wx0, Wy1, Wy0 45010********B Rx=0.565 90 10010000281C Ry=0.348 59 010********D Gx=0.343 57 010********E Gy=0.585 95 10010101311F Bx=0.161 29 001010013220 By=0.121 1F 000111113321 Wx=0.313 50 010********* Wy=0.329 54 010********* Established timings 1 00 000000003624 Established timings 2 00 000000003725 Manufacturer’s reserved timings 00 000000003826 Standard timing ID # 1 01 000000013927Standard timing ID # 1 01 000000014028Standard timing ID # 201 00000001TentativeByte # (decimal) Byte # (hex)Field Name and CommentsValue (hex)Value(binary)4129 Standard timing ID # 2 01 00000001422A Standard timing ID # 3 01 00000001432B Standard timing ID # 3 01 00000001442C Standard timing ID # 4 01 00000001452D Standard timing ID # 4 01 00000001462E Standard timing ID # 5 01 00000001472F Standard timing ID # 5 01 000000014830 Standard timing ID # 6 01 000000014931 Standard timing ID # 6 01 000000015032 Standard timing ID # 7 01 000000015133 Standard timing ID # 7 01 000000015234 Standard timing ID # 8 01 000000015335 Standard timing ID # 8 01 000000015436Detailed timing description # 1 Pixel clock (“42.13MHz”, According toVESA CVT Rev1.1)75 011101015537 # 1 Pixel clock (hex LSB first) 10 000100005638 # 1 H active (“1024”) 00 000000005739 # 1 H blank (“160”) A 0 10100000583A # 1 H active : H blank (“1024 : 160”) 40 010********B # 1 V active (”576”) 40 010********C # 1 V blank (”17”) 17 00010111613D # 1 V active : V blank (”576 :17”) 20 00100000623E # 1 H sync offset (”48”) 30 00110000633F # 1 H sync pulse width ("32”) 20 001000006440 # 1 V sync offset : V sync pulse width (”3 : 5”)35 0011010165 41 # 1 H sync offset : H sync pulse width : V sync offset : V sync width(”48: 32 : 3 : 5”)00 000000006642 # 1 H image size (”222.72 mm”) DE 110111106743 # 1 V image size (”125.28 mm”) 7D 011111016844 # 1 H image size : V image size (”303 : 190”) 00 000000006945 # 1 H boarder (”0”) 00 000000007046 # 1 V boarder (”0”)00 0000000071 47 # 1 Non-interlaced, Normal, no stereo, Separate sync, H/V polNegatives18 000110007248 Detailed timing description # 2 00 000000007349 # 2 Flag 00 00000000744A # 2 Reserved 00 0000000075 4B # 2 FE (hex) defines ASCII string (Model Name “N101N6-L02”, ASCII) FE 11111110764C # 2 Flag 00 00000000774D # 2 1st character of name (“N”) 4E 010********E # 2 2nd character of name (“1”) 31 00110001794F # 2 3rd character of name (“0”) 30 001100008050 # 2 4th character of name (“1”) 31 001100018151 # 2 5th character of name (“N”) 4E 010********* # 2 6th character of name (“6”) 36 001101108353 # 2 7th character of name (“-”)2D 00101101TentativeByte # (decimal) Byte #(hex)Field Name and CommentsValue (hex)Value(binary) 8454 # 2 8th character of name (“L”) 4C 010******* 55 # 2 9th character of name (“0”) 30 001100008656 # 2 9th character of name (“2”) 32 001100108757 # 2 New line character indicates end of ASCII string 0A 000010108858 # 2 Padding with “Blank” character 20 001000008959 # 2 Padding with “Blank” character 20 00100000905A Detailed timing description # 3 00 00000000915B # 3 Flag 00 00000000925C # 3 Reserved 00 00000000935D # 3 FE (hex) defines ASCII string (Vendor “CMO”, ASCII) FE 11111110945E # 3 Flag 00 0000000095 5F # 3 1st character of string (“C”) 43 010******* 60 # 3 2nd character of string (“M”) 4D 010******* 61 # 3 3rd character of string (“O”) 4F 010******* 62 # 3 New line character indicates end of ASCII string 0A0000101099 63 # 3 Padding with “Blank” character 20 00100000100 64 # 3 Padding with “Blank” character 20 00100000101 65 # 3 Padding with “Blank” character 20 00100000102 66 # 3 Padding with “Blank” character 20 00100000103 67 # 3 Padding with “Blank” character 20 00100000104 68 # 3 Padding with “Blank” character 20 00100000105 69 # 3 Padding with “Blank” character 20 00100000106 6A # 3 Padding with “Blank” character 20 00100000107 6B # 3 Padding with “Blank” character 20 00100000108 6C Detailed timing description # 4 00 00000000109 6D # 4 Flag 00 00000000110 6E # 4 Reserved 00 00000000111 6F # 4 FE (hex) defines ASCII string (Model Name“N101N6-L02”, ASCII) FE 11111110112 70 # 4 Flag 00 00000000113 71 # 4 1st character of name (“N”) 4E010******** 72 # 4 2nd character of name (“1”) 3100110001115 73 # 4 3rd character of name (“0”) 3000110000116 74 # 4 4th character of name (“1”) 3100110001117 75 # 4 5th character of name (“N”) 4E010******** 76 # 4 6th character of name (“6”) 3600110110119 77 # 4 7th character of name (“-”) 2D00101101120 78 # 4 8th character of name (“L”) 4C010******** 79 # 4 9th character of name (“0”) 30 00110000122 7A # 4 9th character of name (“2”) 32 00110010123 7B # 4 New line character indicates end of ASCII string 0A 00001010124 7C # 4 Padding with “Blank” character 20 00100000125 7D # 4 Padding with “Blank” character 20 00100000126 7E Extension flag 00 00000000127 7F Checksum04 00000100Tentative6.CONVERTER SPECIFICATION6.1 ABSOLUTE MAXIMUM RATINGSSymbolRatingsVin 29.0V Gnd +/-0.3V PWM, EN-0.3V~7.0V6.2 RECOMMENDED OPERATING RATINGSValueParameter SymbolMin. Typ. Max.Unit NoteConverter Input power supply voltage VLED (7) 12 (20) VBacklight on 2.0 --- 5.5 VEN Control Level Backlight off LED_EN0 --- 1 V PWM High Level 1.4 --- 5.5 VPWM Control Level PWM Low Level PWM0 --- 0.55 VPWM Control Duty Ratio (20) 100 %PWM Control Frequency f PWM (190) (210) (230) HzVLED=7V (323) TBD m A (1)LED Power Current VLED=20VI LED(113) TBD m A (2) Note (1) The specified LED power supply current is under the conditions at Vcc = 7V, Ta = 25 ± 2 ºC, f v= 200 Hz.Note (2) The specified LED power supply current is under the conditions at Vcc = 21V, Ta = 25 ± 2 ºC,f v = 200 Hz.Tentative7. INTERFACE TIMING7.1 INPUT SIGNAL TIMING SPECIFICATIONSThe input signal timing specifications are shown as the following table and timing diagram.TentativeTiming Specifications:0.5< t1 <= 10 msec0 < t2 <= 50 msec0 < t3 <= 50 msect4 >= 500 msect5 >= 200 msect6 >= 200 msecNote (1) Please follow the power on/off sequence described above. Otherwise, the LCD module might be damaged.Note (2) Please avoid floating state of interface signal at invalid period. When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V.Note (3)The Backlight converter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight converter power must be turned off before the powersupply for the logic and the interface signal is invalid.Note (4) Sometimes some slight noise shows when LCD is turned off (even backlight is already off). To avoid this phenomenon, we suggest that the Vcc falling time is better to follow (50us)Љt7Љ(10 ms).Tentative8. OPTICAL CHARACTERISTICS8.1 TEST CONDITIONSItem Symbol Value UnitAmbient Temperature Ta 25r 2oC Ambient Humidity Ha 50r 10%RH Supply Voltage V CC 3.3 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" LED Light Bar Input Current I L 52.5 m A8.2 OPTICA L SPECIFICA TIONSItem Symbol Condition Min. Typ. Max. Unit Note Contrast Ratio CR 300 400 - - (2), (5)T R - 38msResponse TimeT F -712ms (3)Average Luminance of White L AVE 160 200 - cd/m 2(4), (5)Rx (0.565) -RedRy (0.348) -Gx (0.343) -GreenGy (0.585) -Bx (0.161) -BlueBy (0.121) -Wx 0.313 -Color Chromaticity WhiteWy T x =0q ,T Y =0qViewing Normal Angle TYP . -0.050.329TYP .+0.05-(1)T x +40 45 - HorizontalT x -40 45 - T Y +15 20 - Viewing Angle VerticalT Y -CR t 1040 45 - Deg.(1),(5)White Variation of 5 Points G W 5pT x =0q ,T Y =0q 80 - - % (5),(6)Tentative Note (1) Definition of Viewing Angle (T x,T y):TentativeNote (4) Definition of Average Luminance of White (L AVE):Measure the luminance of gray level 63 at 5 pointsL AVE = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5L (x) is corresponding to the luminance of the point X at Figure in Note (6)Note (5) Measurement Setup:TentativeNote (6) Definition of White Variation (G W):Measure the luminance of gray level 63 at 5 pointsG W5p = Minimum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / Maximum [L (1)+ L (2)+ L (3)+ L (4)+ L (5)]Tentative9. PRECAUTIONS9.1 SYSTEM MATCHING PRECAUTIONS(1) Refer to the drawing.(2) To avoid wireless noise interference, please keep the antenna away from LCD control board.9.2 HANDLING PRECAUTIONS(1) The module should be assembled into the system firmly by using every mounting hole. Be carefulnot to twist or bend the module.(2) While assembling or installing modules, it can only be in the clean area. The dust and oil maycause electrical short or damage the polarizer.(3) Use fingerstalls or soft gloves in order to keep display clean during the incoming inspection andassembly process.(4) Do not press or scratch the surface harder than a HB pencil lead on the panel because thepolarizer is very soft and easily scratched.(5) If the surface of the polarizer is dirty, please clean it by some absorbent cotton or soft cloth. Do notuse Ketone type materials (ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. Itmight permanently damage the polarizer due to chemical reaction.(6) Wipe off water droplets or oil immediately. Staining and discoloration may occur if they left onpanel for a long time.(7) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth.In case of contacting with hands, legs or clothes, it must be washed away thoroughly with soap.(8) Protect the module from static electricity, it may cause damage to the C-MOS Gate Array IC.(9) Do not disassemble the module.(10) Do not pull or fold the lamp wire.(11) Pins of I/F connector should not be touched directly with bare hands.9.3 STORAGE PRECAUTIONS(1) High temperature or humidity may reduce the performance of module. Please store LCD modulewithin the specified storage conditions.(2) It is dangerous that moisture come into or contacted the LCD module, because the moisture maydamage LCD module when it is operating.(3) It may reduce the display quality if the ambient temperature is lower than 10 ºC. For example, theresponse time will become slowly, and the starting voltage of lamp will be higher than the roomtemperature.9.4 OPERATION PRECAUTIONS(1) Do not pull the I/F connector in or out while the module is operating.(2) Always follow the correct power on/off sequence when LCD module is connecting and operating.This can prevent the CMOS LSI chips from damage during latch-up.(3) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock whileassembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.Tentative10. PACKING10.1 CARTONTentative 10.23$//(7Tentative11. DEFINITION OF LABELS11.1 CMO MODULE LABELThe barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.Tentative11.2 CARTON LABELProduction location: Made In XXXX. XXXX stands for production location.。