HCA-50B0中文资料

Precautions Before Use
1. General
To obtain optimum performance from this unit, please read the catalog, specification sheet, and operation manual thor-oughly prior to installation and use.
2. Safety Precautions
(1) DO NOT remove the cover as the unit contains sharp blades and injury may result.
(2) DO NOT install the unit in dusty, humid locations, or where the unit might be exposed to water and soot. This may
result in fire and malfunction.
(3) Should foreign bodies (metal fragments, water, liquids) enter the unit, pull out the interface connector and contact
your NEC TOKIN representative. Continued use of the unit may result in fire.
(4) Should abnomalities occur, e.g. unusual heat generation, smoke, or foul smells, immediately pull out the interface
connector and contact your NEC TOKIN representative. Continued use of the unit may result in fire.
(5) DO NOT power the unit at voltages other than those specified.
(6) DO NOT perform any modification on the unit as this may result in fire and malfunction.
(7) Collisions and falls may result in damage to parts. Use special care during transfer.
3. Repair
You will be charged for all repairs on products whose warranty period has expired.
4. Handling of Magnetic Cards
DO NOT damage, soil or transform magnetic cards, or bring a card near a magnetic source as this may impair the card’s reading capability.
INTRODUCTION
Today, the small slices of plastic known popularly as "credit cards" have become substitutes for much, much more than cash. In fact, besides being an integral part of the "cashless society," the magnetic card is used for checking out books at libraries, as a replacement for hotel keys, parking and identification verification, telephone calls—the list goes on and on.
To cope with the ever-growing uses for these cards, NEC TOKIN, a leading Japanese manufacturer of magnetic materials, is proud to introduce a low-cost, highly reliable manually operated magnetic card reader. Using original integrated circuits for the F2F decoder, as well as advanced magnetic heads developed by NEC TOKIN, the Magnetic Card Reader is built to give long, faithful service in a wide range of applications.
CONTENTS
Features and Applications (4)
Specifications of Each Series (5)
MCS-1303 Series (8)
MCS-1603 Series (9)
MCS-1803 Series (11)
MCS-1604 Series (12)
MCS -2103/3103 Series (14)
MCP -1004/1104 Series (Card Reader Kits) (17)
MCP -1204 Series (Card Reader Kits) (20)
MCP -1372 (Card Reader Kits) (23)
MCA-5101 Series (25)
Automatic IC/Magnetic Card Reader HCA-30X0 Series (28)
Magnetic Cards (30)
Magnetic Card Readers & IC/Magnetic Card Readers Vol.01 3
4 Magnetic Card Readers & IC/Magnetic Card Readers Vol.01
Features and Applications Features
The manual magnetic card reader has a dedicated IC that
integrates an F2F decoder and a waveform shaping
circuit. The entirely new card-reading system is an
epochmaking invention, and its patent is pending.
• A large reduction in logic, leading to a compact, highly
reliable, and low-cost reader.
•Enhancement of the acceptable range of the card loading speed,
from 10 to 150 cm/sec, making data reading more stable.
•Reduction in the rate of erroneous readouts. A SIMPLE SYSTEM FOR HOLDING A MAGNETIC HEAD The manual magnetic card readers use a patented tension bar to hold the magnetic head.• A simple structure offering low cost and high reliability.•Improved acceptability of deformed cards.•Good adaptability to international standards.•Imporved operability.
A DEDICATED MAGNETIC HEAD
The magnetic head may be made of any one of a number
of materials.
•Permalloy, Sendust ®, and many others.Applications ID CARDS MANAGEMENT •POS terminal units, bank terminal units, ME equipment,
credit card collators, time recorder systems, parking lot
systems, copier counters, and restaurant systems.
PROGRAM LOADER
•Electronic instruments, microwave ovens, and electronic
knitting machines.
Magnetic Card Readers & IC/Magnetic Card Readers Vol.01 5
Applicable cards
Series Model Size
JIS-II
JIS-I (ISO7811/2)Specifications (H ×W ×L) mm Track1Track2Track3MCS-1303MCS-1303Read
---MCS-1313--Read -MCS-132329.5×27×100
-Read --MCS-1333with a cover
---Read MCS-135332×32.5×100-
Read Read -MCS-1363-
-Read Read MCS-1603MCS-1603Read
---MCS-1613-
-Read -MCS-162324×26×90
-Read --MCS-1633(Cable less)
---Read MCS-1653with a cover
Read -Read -MCS-166328×38×90-
-Read Read MCS-1673Read
Read Read -Option -
Read Read -MCS-1803MCS-1803Read
---MCS-181317×20×70
--Read -MCS-1823(Cable less)-
Read --MCS-1853-
Read Read -MCS-1604MCS-1604Read
---MCS-1614-
-Read -MCS-162424×26×90
-Read --MCS-1634(Cable less)-
--Read MCS-1644Read
-Read -MCS-1654-
Read Read -MCS-1664-
-Read Read MCS-2103/3103MCS-2103Read/Write
---MCS-314341.5×33×100Read/Write
-Read -MCS-31A3
Read/Write Read --Specifications of Each Series 1.Voltage (VDC)+3±5%~+5±10%2.Current consumed (mA) max.Single Track : 2.5Double Track : 5.03.Card swipe speed (mm/sec)100~1,200 (2.85V ≤ V CC < 4.0V)100~1,500 (4.0V ≤ V CC ≤ 5.5V)4.Output current (mA) 4 (Level 1 : V CC =+5V, VoL =0.2V)-4 (Level 0 : V CC =+5V, VoH =4.5V)5.Interface TTL 6.Life 300,000 passes (for Permalloy heads, indoor use)1.Voltage (VDC)+5V ±5%2.Current consumed 80mA max.3.Card loading speed (mm/sec)100~1,2004.Interface RS-232C 5.Life 300,000 passes (for permalloy heads, indoor use)1.Voltage (VDC) Current consumed (mA) max.+5VDC ±5% 200 mA max.+12VDC ±5% 120 mA max.2.Interface TTL 3.Life 300,000 passes (for permalloy heads, indoor use)■MCS-1303/1603/1803/1604/2103/3103 Series : Manual Slide Type
6 Magnetic Card Readers & IC/Magnetic Card Readers Vol.01
Applicable cards
Series
Model Size Specifications
(H ×W ×L) mm MCA-5101MCA-5101
MCA-5111
40×80.3×198MCA-5141Series
Model Size Number of channels Specifications (H ×W ×L) mm MCP-1004MCP-1014
17×14×60
One channel Read MCP-1034Two channels Read
MCP-1104MCP-111415×15.5×45
One channel Read
MCP-1134Two channels Read
MCP-1154
18×15.5×45Three channels Read 1.Attached IC : TCL5010CF (18-Pin SOP Package)2.Voltage (VDC) : +3±5% ~ +5±10%3.Current consumed (mA) max. :2.5/One channel 4.Output current (mA) 4 (Level 1:V CC =+5V, VoL=0.2V)-4 (Level 0:V CC =+5V, VoH=4.5V)■MCP-1004/1104/1204/1300 Series : Card Reader Kits
Applicable cards
Series
Model Size Specifications (H ×W ×L) mm MCP-1204MCP-1204MCP-124421×21×60MCP-1274MCP-1372MCP-137221×21.2×60 1.Attached IC : TCL5010CF (18-Pin SOP Package)2.Voltage (VDC) : +3±5% ~ +5±10%3.Current consumed (mA) max. :2.5/One channel 4.Output current (mA) 4 (Level 1 : V CC =+5V, VoL=0.2V)
-4 (Level 0 : V CC =+5V, VoH=4.5V)
JIS I (ISO7811/2)Track1Track2Track3-
---
Read -Read Read -Read Read -
JIS II Read Read Read Read 1.Voltage (VDC) : +12±5%2.Current consumed 1.5A max.3. Interface TTL 4.Life 300,000passes
(for permalloy heads, indoor use)JIS I(ISO7811/2)Track1Track2Track3----Read --Read -JIS II Read -Read ■MCA-5102/5101 Series : Auto Type
1.
Attached IC : BS300E (48-Pin SSOP Package)2.
Voltage (VDC) : 3.0 ~ 3.6, 4.75 ~ 5.253.
Current consumed (mA) max. : 1.0, 1.254.Output voltage (V)
Level 1 :V CC =+5V,VoL=0.4V
Level 0 :V CC =+5V,VoH=4.0V
Magnetic Card Readers & IC/Magnetic Card Readers Vol.01 7Applicable cards Series Model Size
Specifications (H ×W ×L) mm
HCA-30X0HCA-3000
HCA-3040
HCA-3070
39.4×90.6×164
HCA-3090
HCA-1070
HCA-50B0 1.Voltage (VDC) : +24V ±10%2.Current consumed : 2A max.3.Interface : RS-232C 4.Life : 300,000 passes (for permalloy heads, indoor use)
Magnetic cards IC cards JIS II
JIS I (ISO7811/2)JISX6303/4/6Track1Track2Track3ISO/IEC7816-1~-4Read –––Read/Write Read –Read –Read/Write Read Read Read –Read/Write Read Read Read Read Read/Write Read Read Read ––––––Read/Write ■HCA-30X0 Series : Auto
8 Magnetic Card Readers & IC/Magnetic Card Readers Vol.01
PHOTO : MCS-1653P-1
Magnetic Card Readers & IC/Magnetic Card Readers Vol.01 9
10 Magnetic Card Readers & IC/Magnetic Card Readers Vol.01
JIS II magnetic head
Card swipe direction
JIS I magnetic head
(A fitting is inserted)
✩User's mounting hole is φ4 max.
(Mounting holes)
Specifications
MCS-1604 Series Interface Communication standards EIA/TIA-232E, RS-232C (±10V level)
Communication method Half-duplex start/stop sync. system (Full-duplex for connection)
Transmission speed(BPS)1200/2400/4800/9600 (Factory setting: 9600) (Factory setting cannot be changed.)
Communication format Start bit 1 bit
Data bit 8 bits
Parity 1-bit (even number,odd number), or NON (Factory setting: 1-bit (even)) Factory setting
cannot be changed.
Stop bit 1-bit
Magnetic cards Usable cards See Markings Front surface : JIS56301,6302 ll Reverse surface : JIS56301,6302 l
(ISO7811/2)
Card swipe speed(mm/sec)100-1200
Card transport method Manual
Power supply DC Voltage: DC +5.0 V± 5%, Current consumption: Less than 80mA (ripple 100mVp-p)
(Power is supplied by interface connector.)
Dimensions(mm)24 (H) × 26 (W) × 90 (D) (excluding protrusions)
Weight(g)Approx. 40
Note 1: Please consult us separately for a product applicable to cards for financial purposes.
Card Reader Kits MCP-1372
Outline
The MCP-1372 is a ultra-miniature product for installa-tion in portable terminals. Even more downsized type of MCP-1204 series.
The head, frame and decoder IC are available as a kit. Use of this product allows the magnetic card reader size to be minimized, and installation of an IC chip circuit on the adopting unit side will realize utmost performance.The tension bar system to ensure smooth card swipe as a specific feature of NEC TOKIN's card reader can also be used.
Features
•Operable at a liw voltage(+3VDC to +5VDC)because of its newly developed decoder IC.•Low amount of current is consumed.
•Can process data from three tracks by single IC chip.
Inteface
MCP-1372
Connector housing
8FM-1.0ɆɆ(JST Mfg.Co.Ltd.)
PIN No.
Connection Pin Assignment
Connector
Pin Assignment IN-(ISO1)Ground IN-(ISO2)12345678
IN+(ISO2)IN+(ISO1)IN-(JIS II )Ground IN+(JIS II )
IN+: Head Output Signal IN-: Head Output Signal Ground: Shield Case
MCA-5101
MCA-5141
MCA-5111
Interface Input / Output
TTL
Magnetic card
Applicable magnetic card JIS X 6301, 6302-II JIS X 6301, 6302-II JIS X 6301, 6302-I (Tr2) JIS X 6301, 6302-I (Tr2)Recoding/Replay
Replay only
Replay only
Replay only
(Start/end codes and horizontal parity not included)
Front surface: 69 characters maximum (effective)Front surface: 69 characters maximum (effective)
Reverse surface: 37 characters maximum (effective)
Reverse surface: 37 characters maximum (effective)
Recording density (bpi)Front surface: 210Front surface: 210 Reverse surface: 75
Reverse surface: 75
Card conveyance speed 300 mm / sec ± 20%
Card conveyance mode
Auto
Power supply Voltage : DC+12V ±5% 1.5A max.
Dimensions (mm)40 (H) × 80.3 (W) × 198 (D) (protruding parts not included)Weight
(kg)Approx. 0.55
Operating temperature/humidity (°C)/(%)0~+50 / 20~80 RH, no condensation Storage temperature/humidity (°C)/(%)
–20~+70 / 20~80 RH, no condensation Attachments
cleaning card
Features
•Ultra-compact automatic card reader terminal.
•Applicable to a wide variety of systems using ID cards.
•Quick response to control commands from the controller.•
Comprehensive control commands and parameter setting.
Specifications
Auto Type Magnetic Card Reader
MCA-5101 Series
Applications
•Patient registration cards, student cards, library cards,customer cards, ID cards, time cards, membership cards,operation card systems (authentication, ID control,security, or settlement of accounts)
(at card driven)
sensing switch
connector of interface
(a t c a r d d r i v e n )
notes
tolerance ±1
Automatic IC/Magnetic Card Reader HCA-30X0 Series
Features
•Compact and light weight design enables easy installation.•Accommodates Protocol T-0 and protocol T-1 IC card.•Soft landing card contact method reduces damage to IC cards.•Features retrieve function that ejects the card from backside when its left inside.
•Insertion slot has a shutter that completely closes the opening.•Level 1 of EMV standard(EMV '96 V3.1.1) certified.•Designed to accommodate connection with contactless IC card R/W at the back side.Markings
Applications
•Electronic account settlement terminal (POS terminal,CAT terminal, etc)
•Multi function data terminal (multimedia terminal, etc)•Room entry/exit control system, Time card system •Point control terminal
•Health insurance ID card, other administration card •Other IC card/magnetic card combined system Specifications
HCA–30X0 Series
Magnetic stripe part
IC card part
Interface
Communication standards EIA/TIA-232C standard, RS-232C (±10V level)
Communication mode Harf-duplex start/stop sync. system and half-duplex start/stop system
Transmission speed 1200/2400/4800/9600/19200/38400bps (Default=38400bps. The value can be changed by command)
Frame composition
7 bit +1 parity (even number) / 8 bit + no parity / 8 bit +1 parity (even number)Card
Applicable card
JIS X 6301, 6302-II type JIS X 6303, 6304, 6306ISO/IEC7810, 7811-1, 7811-2
ISO/IEC7816-1~-4, JICSAP
Write/Read
Read only;
Simultaneous reading of JIS type II,
Write/Read ISO track 1, 2 and 3
Card carry
Carrying speed 300mm/sec ±50mm/sec (+24V)
Insertion/Ejection
Insertion and ejection from both front and back are possible
Card reading
Shutter
Complete closure
Magnetism detection
Enabled (by prehead detection of ISO track 1 and 2)Lifetime/Reliability
Component Approx. 500,000 passes or 5 years; earlier of either
Parts Magnetic head: approx. over 300,000 passes/IC contact: approx. over 300,000 passes/ card carry rubber roller approx. over 300,000 passes
Error rate
Equal to or lower than 5/5000 times
Other function
LED external connection 4 driver circuits Buzzer connection 1 driver circuits
Compulsory ejection
Features ejection of card by turning knob dial (possible even when the power is turned off)
Power supply Supply voltage: DC+24V+/-10% (equal to or lower than 2A)
Dimension W ×D ×H: 90.6×164×39.4(mm)
Weight
Approx. 340g
Operating temperature/Humidity -0˚C to +50˚C, 10%RH to 90%RH, no dewing should exist Storage temperature/Humidity
-20˚C to +70˚C, 10%RH to 90%RH no dewing should exist
Magnetic Stripe
IC cards Model
JIS–II JIS–I (ISO)IS07816-JISX6301/ISO7810/7811-1/7811-21~4
6302-II
Track1Track2Track3
HCA-3000R –––R/W HCA-3040R –R –R/W HCA-3070R R R –R/W HCA-3090R R R R R/W HCA-1070R R R ––HCA-50B0
–
–
–
–
R/W
Shape and Dimensions
DC/DC converter
connector
RS-232C LED/Buzzer connector
Ground board
Power supply connector
Card insertion slot
(green)
Ejection knob dial
(with insulation sheet)
PWB mounted
(29)
77.55955
30 m a x .
4- 3.3
5
67.5
62.516
2.585
29.567.519
136135
2.53136
0.3
12
45
22
19.5
18.5164
90.6
39.4
CL Card protruding length
φφ[mm]
GENERAL NOTES
(Limitations and Liabilities)
•The names of the products and the specifications in this catalog are subject to change without notice for the sake of improvement. The manufacturer also reserves the right to discontinue any of these products. At the time of delivery, please ask for specification sheets to check the contents before use.
• Descriptions in this catalog regarding product characteris-tics and quality are based solely on discrete components. When using these units configured within a system or in-stalling them into a product, be sure to evaluate and confirm the specifications with full considerations to particular applications.
•The manufacturer’s warranty will not cover any disadvan-tage or damage caused by improper use of the products, deviating from the characteristics, specifications, or conditions for use described in this catalog.
•When constructing a financial card reader system using these units, the manufacturer will not take any responsibil-ity for improper actions such as the forgery of magnetic cards that may occur during the management and administration of the system.
•Please be advised that the manufacturer accepts no responsibility for any infraction on third party patents or industrial copyrights by users of the manufacturer’s products. The manufacturer is responsible only when such infractions are attributable to the structural design of the product and its manufacturing process.
•No part of this document may be reproduced without written permission from the manufacturer.
•Export Control
For customers outside Japan
NEC-TOKIN products should not be used or sold for
use in the development, production, stockpiling or
utilization of any conventional weapons or mass-
destructive weapons (nuclear weapons, chemical or
biological weapons, or missiles), or any other weapons.
For customers in Japan
For products which are controlled items subject to the'
Foreign Exchange and Foreign Trade Law' of Japan,
the export license specified by the law is required for
export.
•This catalog is current as of September 2004.。