5082-7660-EE100中文资料
ECE 100
E/ECE/324 )Rev.2/Add.99/Amend.1E/ECE/TRANS/505 )May 7, 2002STATUS OF UNITED NATIONS REGULATIONECE 100UNIFORM PROVISIONS CONCERNING THE APPROVAL OF:BATTERY ELECTRIC VEHICLES WITH REGARD TO SPECIFICREQUIREMENTS FOR THE CONSTRUCTION, FUNCTIONALSAFETY AND HYDROGEN EMISSIONIncorporating:00 series of amendments Date of Entry into Force: 23.08.96 Corr. 1 to the 00 series of amendments Date of Entry into Force: 28.06.96 Supplement 1 to the 00 series of amendments Date of Entry into Force: 21.02.02E/ECE/324 )Rev.2/Add.99/Amend.1E/ECE/TRANS/505 )May 7, 2002UNITED NATIONSAGREEMENTCONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OFAPPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS (*) (Revision 2, including the amendments entered into force on October 16, 1995)Addendum 99: Regulation No. 100Amendment 1Supplement 1 to the original version of the Regulation − Date of entry into force: February 21, 2002UNIFORM PROVISIONS CONCERNING THE APPROVAL OF BATTERYELECTRIC VEHICLES WITH REGARD TO SPECIFIC REQUIREMENTSFOR THE CONSTRUCTION, FUNCTIONAL SAFETY ANDHYDROGEN EMISSION(*)Former title of the Agreement:Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on March 20, 1958.REGULATION No. 100UNIFORM PROVISIONS CONCERNING THE APPROVAL OF BATTERYELECTRIC VEHICLES WITH REGARD TO SPECIFIC REQUIREMENTS FORTHE CONSTRUCTION, FUNCTIONAL SAFETY AND HYDROGEN EMISSIONCONTENTSREGULATION1. Scope2. Definitions3. Application for approval4. Approval5. Specifications and tests6. Modifications and extension of the type approval for vehicle type7. Conformity of production8. Penalties for non-conformity of production9. Production definitely discontinued10. Names and addresses of technical services responsible for conducting approval tests and ofadministrative departmentsANNEXESAnnex 1 ― CommunicationAnnex 2―Arrangements of approval marksAnnex 3―Protection against direct contacts of parts under voltageAnnex 4―Measurement of the insulation resistance using the traction batteryAnnex 5―Symbol for the indication of a voltagecharacteristics of the vehicleAnnex 6― EssentialAnnex 7―Determination of hydrogen emissions during the charge procedures of the traction battery1.SCOPEThe following prescriptions apply to safety requirements with respect to all battery electricroad vehicles of categories M and N, with a maximum design speed exceeding 25 km/h.2. DEFINITIONSFor the purposes of this Regulation:2.1."Battery electric road vehicle" means a vehicle with bodywork intended for road use,powered exclusively by an electric motor whose traction energy is supplied exclusively by atraction battery installed in the vehicle.2.2."Vehicle type" means battery electric road vehicles which do not differ in such essentialaspects as:Dimensions, structure, shape and nature of constituting materials;Installation of the power system components, battery or battery packs;Nature and type of electric and electronic components.2.3."Approval of a type of battery electric road vehicle" means the approval of a type ofelectric vehicle regarding construction and functional safety requirements specific to the useof electric energy.2.4."Traction battery" means the assembly of all battery modules which are electricallyconnected, for the supply of energy of the power circuit.2.5."Battery module" means the smallest single energy storage consisting of one cell or anassembly of cells, electrically connected in serial or in parallel, placed in one container andmechanically associated.2.6."Battery pack" means a single mechanical assembly comprising battery modules andretaining frames or trays. A vehicle may have one or several, or no battery pack.2.7."Auxiliary battery" means the battery unit whose reserve of energy is used only for theauxiliary network supply.2.8.Auxiliary network" means the assembly of auxiliary electric equipment with similarfunctions to the one used on vehicles equipped with an internal combustion engine.2.9."On-board charger" means an energy electronic converter linked by construction to thevehicle and used for charging the traction battery from an external electric power supply(mains network).2.10."Coupling system" means all the parts used to connect the vehicle to an external electricpower supply (alternative or direct current supply).2.11."Power train" means the electrical circuit including:(i) The traction battery;(ii) The electronic converters (on-board charger, electronic control of the traction motor, DC/DC converter, etc.);(iii) The traction motors, the associated wiring harness and connectors, etc.chargingcircuit;The(iv)(v) The power auxiliary equipment (e.g. heating, defrosting, power steering, …).2.12."Driver train" means specific components of power train: traction motors, electronic controlof the traction motors, the associated wiring harness and connectors.2.13."Electronic converter" means an apparatus allowing the control and/or transfer of electricenergy.2.14."Passenger and load compartment" means the space in the vehicle for occupantaccommodation and bounded by the roof, floor, side walls, outside glazing, front bulkheadand the plane of the rear-seat back support and eventually the partition between it and thecompartment(s) containing the battery modules.2.15."Drive direction control unit" means a specific device physically actuated by the driver inorder to select the drive direction (forwards or backwards), in which the vehicle will travel ifthe accelerator is actuated.2.16."Direct contact" means the contact of persons or livestock with live parts.2.17."Live parts" means any conductor or conductive part(s) intended to be electricallyenergised in normal use.2.18."Indirect contact" means contact or persons or livestock with exposed conductive parts. 2.19."Exposed conductive part" means any conductive part which can readily be touched andwhich is not normally alive, but which may become electrically energised under faultconditions.2.20."Electrical circuit" means an assembly of connected live parts through which an electricalcurrent is designed to pass in normal operation conditions.2.21."Active driving possible mode" means a vehicle mode when application of pressure tothe accelerator pedal (or activation of an equivalent control) will cause the drive train tomove the vehicle.2.22."Nominal voltage" means the root-mean-square (r.m.s.) value of the voltage specified bythe Manufacturer, for which the electrical circuit is designed and to which its characteristicsare referred.2.23."Working voltage" means the highest root-mean-square (r.m.s.) value of an electricalcircuit voltage, specified by the Manufacturer, which may occur across any insulation, inopen circuit conditions or under normal operating conditions.2.24."Electrical chassis" means a set made of conductive parts electrically linked together, andall other conductive parts electrically linked to them, whose potential is taken as a reference.2.25."Key" means any device designed and constructed to provide a method of operating alocking system which is designed and constructed to be operated only by that device.3.APPLICATION FOR APPROVAL3.1.The application for approval of a vehicle type with regard to specific requirements for theconstruction and functional safety of battery electric road vehicles shall be submitted byvehicle Manufacturer or by his duly accredited Representative.3.2.It shall be accompanied by the under-mentioned documents in triplicate and followingparticulars:3.2.1.Detailed description of the battery electric road vehicle type as regards to the shape of thebodywork, the electric drive train (motors and controllers), traction battery (type, capacity,battery management).3.3. A vehicle representative of the vehicle type to be approved shall be submitted to thetechnical service responsible for conducting the approval tests.3.4.The competent Authority shall verify the existence of satisfactory arrangements for ensuringeffective control of the conformity of production before type approval is granted.4.APPROVAL4.1.If the vehicle submitted for approval pursuant to this Regulation meets the requirements ofParagraph 5 below and Annexes 3, 4,5 and 7 to this Regulation, approval of this vehicletype shall be granted.4.2.An approval number shall be assigned to each type approved. Its first two digits (at present00 for the Regulation in its original form) shall indicate the series of amendmentsincorporating the most recent major technical amendments made to the Regulation at thetime of issue of the approval. The same Contracting Party shall not assign the samenumber to another vehicle type.4.3.Notice of approval or of refusal or of extension or withdrawal of approval or productiondefinitely discontinued of a vehicle type pursuant to this Regulation shall be communicatedto the Parties to the Agreement applying this Regulation, by means of a form conforming tothe model in Annex 1 to this Regulation.4.4.There shall be affixed, conspicuously and in a readily accessible place specified on theapproval form, to every vehicle conforming to a vehicle type approved under this Regulationan international approval mark consisting of:4.4.1. A circle surrounding the Letter "E" followed by the distinguishing number of the countrywhich has granted approval (1)4.4.2.The number of this Regulation, followed by the Letter "R", a dash and the approval numberto the right of the circle described in Paragraph 4.4.1.4.5.If the vehicle conforms to a vehicle type approved under one or more other Regulationsannexed to the Agreement in the country which has granted approval under this Regulation,the symbol prescribed in Paragraph 4.4.1. need not be repeated; in this case the Regulationand approval numbers and the additional symbols of all the Regulations under whichapproval has been granted in the country which has granted approval under this Regulationshall be placed in vertical columns to the right of the symbol prescribed in Paragraph 4.4.1.4.6.The approval mark shall be clearly legible and shall be indelible.4.7.The approval mark shall be placed on or close to the vehicle data plate affixed by theManufacturer.4.8.Annex 2 to this Regulation gives examples of the arrangements of the approval mark.5.SPECIFICATIONS AND TESTS5.1.Vehicle Construction Requirements5.1.1.Traction Battery5.1.1.1. Installation of the traction battery in the vehicle shall not allow any potential dangerousaccumulation of gas pockets.5.1.1.2. Battery compartments containing battery modules which may produce hazardous gasesshall be safely ventilated.5.1.1.3. The traction battery and the power train shall be protected by properly rated fuses or circuitbreakers. The Manufacturer shall supply data to the laboratory which allows verification thattheir calibration ensures opening, if necessary.(1)1 for Germany,2 for France,3 for Italy,4 for the Netherlands,5 for Sweden,6 for Belgium,7 for Hungary,8 for the CzechRepublic, 9 for Spain, 10 for Yugoslavia, 11 for the United Kingdom, 12 for Austria, 13 for Luxembourg, 14 for Switzerland,15 (vacant), 16 for Norway, 17 for Finland, 18 for Denmark, 19 for Romania, 20 for Poland, 21 for Portugal, 22 for theRussian Federation, 23 for Greece, 24 for Ireland, 25 for Croatia, 26 for Slovenia, 27 for Slovakia, 28 for Belarus, 29 for Estonia, 30 (vacant), 31 for Bosnia and Herzegovina, 32 for Latvia, 33 (vacant), 34 for Bulgaria, 35 (vacant), 36 for Lithuania,37 for Turkey, 38 (vacant), 39 for Azerbaijan, 40 for The former Yugoslav Republic of Macedonia, 41 (vacant), 42 for theEuropean Community (Approvals are granted by its Member States using their respective ECE symbol), 43 for Japan,44 (vacant), 45 for Australia, 46 for Ukraine, 47 for South Africa and 48 for New Zealand. Subsequent numbers shall beassigned to other countries in the chronological order in which they ratify or accede to the Agreement concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approval s Granted on the Basis of these Prescriptions, and the numbers thus assigned shall be communicated by the Secretary-General of the United Nations to the Contracting Parties to the Agreement.5.1.2.Protection against Electric Shock5.1.2.1. Protection against direct contact with live parts of the power train:5.1.2.1.1. If the working voltage of the electric circuit is lower than 60 volts DC or 25 volts AC, norequirements are necessary.with live parts of the electrical power train whose maximum voltage is at least contact5.1.2.1.2. Direct60 volts DC or 25 volts AC shall be prevented either by insulation or by the use of covers,protection grilles, perforated metal sheets, etc. These protections shall be reliably securedand shall be mechanically resistant. They shall not be able to be opened, disassembled orremoved without the use of tools.5.1.2.1.3. In passenger and load compartments live parts in any case shall be protected by enclosureshaving a protection degree of at least IPXXD.5.1.2.1.4. Enclosures in other areas of the vehicle shall have a protection degree of at least IPXXB.5.1.2.1.5. In the engine compartment the access to live parts shall only be possible with voluntary action.5.1.2.1.6. After opening the cover, the access to the parts of the coupling system shall be protectedwith IPXXB protection.degrees IPXXB and IPXXD are related respectively, to the contact of a jointed 5.1.2.1.7. Protectiontest finger and a test wire with hazardous parts (Annex 3).markings5.1.2.1.8. VehicleProtection covers of live parts described in Paragraph 5.1.2.1.2. shall be marked by asymbol as described in Annex 5.5.1.2.2. Protection against indirect contacts with exposed conductive parts of the power train.5.1.2.2.1. If the working voltage of the electric circuit is lower than 60 volts DC or 25 volts AC, norequirements are necessary;5.1.2.2.2. The design, installation, and manufacture of electric material shall be such that insulationfailures are avoided;5.1.2.2.3. Protection against indirect contacts shall be ensured by using insulation and additionally, theexposed conductive parts of the on-board equipment shall be galvanically connectedtogether. This potential equalisation is obtained by connecting the exposed conductiveparts together either by a protective conductor, e.g. wire, ground truss, or directly by thevehicle metallic chassis. Two exposed conductive parts welded together are considered ashaving no discontinuity points. If there is some discontinuity, this point shall be by-passedby potential equalisation.5.1.2.3. InsulationResistance5.1.2.3.1. The insulation resistance measurement is performed after maintaining the vehicle for aconditioning time of 8 hours with the following conditions:Temperature: 23 ± 5°C,+10/-5%.Humidity: 90%5.1.2.3.2. Using a measuring DC voltage equal to the nominal voltage of the traction battery, insulationresistances between any exposed conductive part and each polarity of the battery shallhave a minimum value of 500 Ω/V of the nominal voltage (Annex 4 contains an example ofhow this test may be conducted).ofthe Protective Conductor:5.1.2.3.3. ResistanceThe potential equalisation resistance between any two exposed conductive parts shall belower than 0.1 Ω. This test shall be performed by a current of at least 0.2 A.5.1.2.4. Connection of the vehicle to the mains network:5.1.2.4.1. In no case the vehicle shall be capable to move by its own means when it is galvanicallyconnected to an energy supply network or to an off-board charger;5.1.2.4.2. The components used when charging the battery from an external source shall allow thecharging current to be cut in case of disconnection without physical damage;5.1.2.4.3. The coupling system parts likely to be live shall be protected against any direct contact in alloperating conditions;conductive parts shall be electrically linked through a conducting wire plugged exposed5.1.2.4.4. Allto earth when charging.5.2.Functional Safety Requirements5.2.1. Power on Procedure:5.2.1.1. The power on procedure shall be applied via a key switch.5.2.1.2. It shall not be possible to remove this key in any position that energises the drive train ormakes active driving possible.5.2.2.Running and Stopping Conditions:5.2.2.1. At least a momentary indication must be given to the driver either:(a) When the vehicle is in "active driving possible mode" or,(b) When one further action is required to place the vehicle in "active driving possiblemode".5.2.2.2. When the state of charge of the battery reaches the minimum state of charge value definedby the Manufacturer, the user shall be warned to perceive this situation quickly enough to beable to drive the vehicle, on its own power, at least out of the traffic zone.5.2.2.3. Unintentional acceleration, deceleration and reversal of the drive train shall beprevented. In particular, a failure (e.g. in the power train) shall not cause more than 0,1 mmovement of a standing unbraked vehicle.5.2.2.4. When leaving the vehicle, the driver shall be informed by an obvious signal (e.g. optical oraudible signal) if the drive train is still in the active driving possible mode.5.2.3.Reversing5.2.3.1. Reversing shall be possible only after operation of a specific control. This action shallrequire either:(a) The combination of two different actuation’s, or(b) An electric switch which allows reverse to be engaged only when the vehicle ismoving at a forward speed not exceeding 5 km/h. Above this speed all actions onthis device shall be ignored. The device shall have only one stable position.5.2.3.2. The state of the drive direction control unit shall be readily identified to the driver.5.2.4.Emergency Power Reduction5.2.4.1. If the vehicle is equipped with a device to limit the performance in an emergency(e.g. overheating of a component) the user shall be informed by an obvious signal.5.3.Determination of Hydrogen Emissions5.3.1.This test must be carried out on all battery electric road vehicles referred to in Paragraph 1of this Regulation.Road vehicles equipped with non-aqueous electrolyte batteries or sealed "gas recombinant"batteries are excluded.5.3.2.The test must be conducted following the method described in Annex 7 to the presentRegulation. The hydrogen sampling and analysis must be the ones prescribed. Otheranalysis methods can be approved if it is proven that they give equivalent results.5.3.3.During a normal charge procedure in the conditions given in Annex 7, hydrogen emissionsmust be below 125 g during 5 h, or below 25 x t2 g during t2 (in h).5.3.4.During a charge carried out by an on-board charger presenting a failure (conditions given inAnnex 7), hydrogen emissions must be below 42 g. Furthermore the on-board charger mustlimit this possible failure to 30 minutes.5.3.5.All the operations linked to the battery charging are controlled automatically, included thestop for charging.5.3.6.It shall not be possible to take a manual control of the charging phases.5.3.7.Normal operations of connection and disconnection to the mains or power cuts must notaffect the control system of the charging phases.5.3.8.Important charging failures must be permanently signalled to the driver. An important failureis a failure that can lead to a disfunctioning of the on-board charger during charging later on.5.3.9.The manufacturer has to indicate in the owner's manual, the conformity of the vehicle tothese requirements.5.3.10.The approval granted to a vehicle type relative to hydrogen emissions can be extended todifferent vehicle types belonging to the same family, in accordance with the definition of thefamily given in Annex 7, Appendix 2.6.MODIFICATION AND EXTENSION OF THE TYPE APPROVAL FOR VEHICLE TYPE6.1.Every modification of the vehicle type shall be notified to the administrative departmentwhich approved the vehicle type. The department may then either:6.1.1.Consider that the modifications made are unlikely to have an appreciable adverse effect andthat in any case the vehicle still complies with the requirements or6.1.2.Require a further test report from the technical service responsible for conducting the tests.6.2.Confirmation or refusal of approval, specifying the alteration, shall be communicated by theprocedure specified in Paragraph 4.3. above to the Parties to the Agreement applying thisRegulation.6.3.The competent Authority issuing the extension of approval shall assign a series number forsuch an extension and inform thereof the other Parties to the 1958 Agreement applying theRegulation by means of a communication form conforming to the model in Annex 1 to thisRegulation.7.CONFORMITY OF PRODUCTION7.1.Every vehicle approved under this Regulation shall be so manufactured as to conform to thetype approved by meeting the requirements set out in Paragraph 5. above.7.2.In order to verify that the requirements of Paragraph 7.1. are met, suitable controls of theproduction shall be carried out.7.3.The holder of the approval shall, in particular:7.3.1.Ensure the existence of procedures for the effective quality control of vehicles;7.3.2.Have access to the testing equipment necessary for checking the conformity of eachapproved type;7.3.3.Ensure that test result data are recorded and that the annexed documents remain availablefor a period to be determined in agreement with the administrative department;7.3.4.Analyse the results of each type of test, in order to verify and ensure the consistency ofcharacteristics of the vehicle, making allowance for permissible variations in industrialproduction;7.3.5.Ensure that for each type of vehicle at least the tests prescribed in Paragraph 5. of thisRegulation are carried out;7.3.6.Ensure that any set of samples or test pieces giving evidence of non-conformity with thetype of test in question shall give rise to a further sampling and test. All necessary stepsshall be taken to re-establish conformity of the corresponding production.7.4.The competent Authority which has granted type approval may at any time verify theconformity control methods applied in each production unit.7.4.1.At every inspection, the test records and production records shall be presented to thevisiting inspector.7.4.2.The inspector may take samples at random to be tested in the Manufacturer'slaboratory. The minimum number of samples may be determined according to the results ofthe Manufacturer's own checks.7.4.3.When the quality level appears unsatisfactory or when it seems necessary to verify thevalidity of the tests carried out in application of Paragraph 7.4.2., the inspector shall selectsamples to be sent to the technical service which has conducted the type approval tests.7.4.4.The competent Authority may carry out any test prescribed in this Regulation.7.4.5.The normal frequency of inspections by the competent Authority shall be one per year. Ifunsatisfactory results are recorded during one of this visits, the competent Authority shallensure that all necessary steps are taken to re-establish the conformity of production asrapidly as possible.8.PENALTIES FOR NON-CONFORMITY OF PRODUCTION8.1.The approval granted in respect of a vehicle type, pursuant to this Regulation may bewithdrawn if the requirements laid down in Paragraph 7 above are not complied with, or ifthe vehicle or its components fail to pass the tests provided for in Paragraph 7.3.5. above.8.2.If a Contracting Party to the Agreement applying this Regulation withdraws an approval ithas previously granted, it shall forthwith so notify the other Contracting Parties applying thisRegulation, by means of a communication form conforming to the Model in Annex 1 to thisRegulation.9.PRODUCTION DEFINITIVELY DISCONTINUEDIf the holder of the approval completely ceases to manufacture a type of vehicle approved inaccordance with this Regulation, he shall so inform the Authority which granted theapproval. Upon receiving the relevant communication, that Authority shall inform thereof theother Contracting Parties to the 1958 Agreement applying this Regulation by means of acommunication form conforming to the model in Annex 1 to this Regulation.S AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FORCONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTSThe Contracting Parties to the 1958 Agreement applying this Regulation shall communicateto the United Nations Secretariat the names and addresses of the technical servicesresponsible for conducting approval tests and the administrative departments which grantapproval and to which forms certifying approval or extension or refusal or withdrawal ofapproval or production definitely discontinued, issued in other countries are to be sent.ANNEX 1COMMUNICATION(maximum format: A4 (210 x 297 mm))issued by: Name of administration.............................................(1)..........................................................................................GRANTED,concerning: (2) APPROVALEXTENDED,APPROVALAPPROVALREFUSED,WITHDRAWN,APPROVALPRODUCTION DEFINITELY DISCONTINUED,of a battery electric road vehicle pursuant to Regulation No. 100.Approval No...................................................Extension No.................................1. Trade name or mark of the vehicle............................................................................................2. Vehicle type................................................................................................................................category.........................................................................................................................3. Vehiclename and address............................................................................................4. Manufacturer's5. If applicable, name and address of manufacturer's representative...........................................submitted for approval on .............................................................................................6. Vehicle7. Technical service responsible for conducting approval tests ...................................................8. Date of report issued by that service ........................................................................................9. Number of report issued by that service ...................................................................................10. Location of the approval mark ...................................................................................................11. Reason(s) for extension of approval (if applicable) (2)...............................................................granted/extended/refused/withdrawn (2) .....................................................................12. Approval13. Place ....................................................................................................................................................................................................................................................................................14. Date15. Signature ...................................................................................................................................16. The documents filed with the request for approval or extension may be obtained on request.(1)Distinguishing number of the country which has granted/extended/refused/withdrawn approval (see approval provisions in the Regulation)(2)Strike out what does not apply.。
5082-5701-DJ000中文资料
14.2 mm (0.56 inch)Seven Segment Displays Technical DataFeatures• Industry Standard Size • Industry Standard Pinout 15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red, Yellow, Green, Orange • Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Gray Package Gives Optimum Contrast±50° Viewing Angle • Design FlexibilityCommon Anode or Common CathodeSingle and Dual Digits Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing • Intensity and Color Selection OptionSee Intensity and ColorSelected Displays Data Sheet • Sunlight Viewable AlGaAsDescriptionThe 14.2 mm (0.56 inch) LED seven segment displays aredesigned for viewing distances upto 7 metres (23 feet). Thesedevices use an industry standard size package and pinout. Both the numeric and ±1 overflow devices feature a right hand decimalpoint. All devices are available as either common anode or common cathode.Orange AlGaAs Red HERYellowGreen Package HDSP-HDSP-[1]HDSP-[1]HDSP-HDSP- DescriptionDrawingH401H151550157015601Common Anode Right Hand Decimal A H403H153550357035603Common Cathode Right Hand Decimal B H157550757075607Common Anode ±1. Overflow C H158550857085608Common Cathode ±1. OverflowD K401552157215621Two Digit Common Anode Right Hand DecimalE K403552357235623Two Digit Common Cathode Right Hand DecimalFDevicesNote:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet for low current operation.HDSP-K40x Series HDSP-550x Series HDSP-552x Series HDSP-560x Series HDSP-562x Series HDSP-570x Series HDSP-572x Series HDSP-H15x Series HDSP-H40x SeriesThese displays are ideal for most applications. Pin for pin equivalent displays are alsoavailable in a low current design.The low current displays are idealfor portable applications. For additional information see the Low Current Seven Segment Displays data sheet.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]1: Common Anode 3: Common CathodeDevice Specific Configuration [1]Refer to Respective DatasheetPackage [1]H: 14.2 mm (0.56 inch) Single Digit Seven Segment DisplayFUNCTIONPIN AB CDEF1CATHODE e ANODE e CATHODE c ANODE cE CATHODE NO. 1 E ANODE NO. 12CATHODE d ANODE d ANODE c, d CATHODE c, d D CATHODE NO. 1 D ANODE NO. 13ANODE [3]CATHODE [4]CATHODE b ANODE bC CATHODE NO. 1 C ANODE NO. 14CATHODE c ANODE c ANODE a, b, DP CATHODE a, b, DP DP CATHODE NO. 1DP ANODE NO. 15CATHODE DP ANODE DP CATHOPDE DP ANODE DE E CATHODE NO. 1 E ANODE NO. 26CATHODE b ANODE b CATHODE a ANODE aD CATHODE NO. 2 D ANODE NO. 27CATHODE a ANODE a ANODE a, b, DP CATHODE a, b, DP G CATHODE NO. 2G ANODE NO. 28ANODE [3]CATHODE [4]ANODE c, d CATHODE c, d C CATHODE NO. 2 C ANODE NO. 29CATHODE f ANODE f CATHODE d ANODE d DP CATHODE NO. 2DP ANODE NO. 210CATHODE g ANODE g NO PINNO PINB CATHODE NO. 2 B ANODE NO. 211 A CATHODE NO. 2 A ANODE NO. 212 F CATHODE NO. 2 F ANODE NO. 213DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE 14DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE 15 B CATHODE NO. 1 B ANODE NO. 116 A CATHODE NO. 1 A ANODE NO. 117G CATHODE NO. 1G ANODE NO. 118F CATHODE NO. 1 F ANODE NO. 1NOTES:1. ALL DIMENSIONS IN MILLIMETRES (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. REDUNDANT CATHODES.5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.Package DimensionsInternal Circuit DiagramNotes:1. See Figure 2 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 7 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 8 to establish pulsed conditions.HER/Orange HDSP-5500AlGaAs Red HDSP-H40x Yellow Green HDSP-H150HDSP-K40x HDSP-5700HDSP-5600 Description SeriesSeriesSeriesSeriesUnits Average Power per Segment or DP 9610580105mW Peak Forward Current per 160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per Segment or DP 40[2]30[4]20[6]3018]mA Operating Temperature Range -20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment or DP 3.0V Lead Solder Temperature for 3 Seconds 260°C(1.60 mm [0.063 in.] below seating plane)Absolute Maximum Ratings6. Derate above 81°C at 0.52 mA/°C.7. See Figure 9 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V9.116.0mcd I F = 20 mA(Digit Average)1.8I F = 20 mAForward Voltage/Segment or DP V F V2.03.0I F = 100 mAH15XPeak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin400°C/W/to-Pin SegHigh Efficiency RedDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions9002800I F = 10 mA Luminous Intensity/Segment[1,2,6]I Vµcd(Digit Average)3700I F = 60 mA Peak:1 of 6 dfForward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 55XXPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegYellowDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions6001800I F = 10 mA Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)2750I F = 60 mA Peak:1 of 6 dfForward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mA 57XXPeak WavelengthλPEAK583nmDominant Wavelength[3,7]λd581.5586592.5nmReverse Voltage/Segment or DP[4]V R 3.040V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegOrangeDeviceSeriesHDSP- Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 2.37mcd I F = 10 mA(Segment Average)[1,2]Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK600nm H40x Dominant Wavelength[3]λd603nm I F = 10 mA K40x Reverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µA Temperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-Pin345°C/W/to-Pin SegDeviceSeriesHDSP-ParameterSymbol Min.Typ.Max.UnitsTest Conditions 9002500I F = 10 mALuminous Intensity/Segment [1,2]I Vµcd(Digit Average)`3100I F = 60 mA Peak:1 of 6 df Forward Voltage/Segment or DPV F 2.1 2.5V I F = 10 mA56XXPeak Wavelength λPEAK 566nm Dominant Wavelength [3,7]λd 571577nm Reverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µATemperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DPThermal Resistance LED Junction-R θJ-Pin345°C/W/to-PinSegHigh Performance GreenNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-H15X series.6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the HDSP-550X series.7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.AlGaAs RedFigure 3. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Forward Current vs.Forward Voltage.HER, Yellow, Green, OrangeFigure 7. Maximum Tolerable Peak Currentvs. Pulse Duration – HER, Orange.I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C 5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A)I F – FORWARD CURRENT PER SEGMENT – mA204010305152535ηP E A K – N O R M A L IZ E D R E L A T I V E E F F I C I E N C YI PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA4550110120Figure 11. Forward Current vs.Forward Voltage.Figure 9. Maximum Tolerable PeakCurrent vs. Pulse Duration – Green.Figure 10. Maximum Allowable DC Current vs.Ambient Temperature.Figure 12. Relative LuminousIntensity vs. DC Forward Current.Figure 13. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.Electrical/OpticalFor more information onelectrical/optical characteristics,please see Application Note 1005.Contrast EnhancementFor information on contrastenhancement please see Application Note 1015.Soldering/CleaningCleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from thechlorinated hydrocarbon family(methylene chloride, trichloro–ethylene, carbon tetrachloride,etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs please refer to Application Note 1027.I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 10 m A )I F – DC FORWARD CURRENT – mAηV – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A P E R S E G ME N T )0.6I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA902070801001.61.41.31.10.90.860504030100.71.01.21.5HDSP-H15x IV Bin Category Min.Max.K 9.2016.90L 13.8025.30M 20.7038.00N 31.1056.90O 46.6085.40Intensity Bin Limits (mcd)AlGaAs RedHDSP-550x/552x IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K 10.3919.04HERHDSP-570x/572xIV Bin Category Min.Max.D 0.61 1.11E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K 10.3919.04YellowHDSP-560x/562x IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.618.46GreenColor CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.10HDSP-H40x/K40x IV Bin Category Min.Max.B 0.77 1.17C 0.95 1.45D 1.19 1.82E 1.49 2.27F 1.85 2.89G 2.32 3.54H 2.904.43Orange元器件交易网元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(408) 654-8675Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 271 2451India, Australia, New Zealand: (+65) 271 2394Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 271 2194Malaysia, Singapore: (+65) 271 2054Taiwan: (+65) 271 2654Data subject to change.Copyright © 2002 Agilent Technologies, Inc.Obsoletes 5988-0383ENJanuary 17, 20025988-4273EN。
5082-7401-EHZ00中文资料
7.6 mm (0.3 inch) Micro Bright Seven Segment Displays Technical DataFeatures• Available with Colon for Clock Display • Compact Package 0.300 x 0.500 inchesLeads on 2.54 mm (0.1 inch)Centers• Choice of Colors AlGaAs Red, HighEfficiency Red, Yellow, Green,Orange• Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Surface Color Gives Optimum Contrast±50° Viewing Angle • Design FlexibilityCommon Anode or Common CathodeRight Hand Decimal Point ±1. Overflow Character • Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing • Intensity and Color Selection Available See Intensity and ColorSelected Displays Data Sheet • Sunlight Viewable AlGaAsDescriptionThe 7.6 mm (0.3 inch) LED seven segment displays are designed for viewing distances up to 3 metres (10 feet). These devices use an industry standard size package and pinout. Both the numeric andDevicesOrange AlGaAs [1]HER [1]Yellow [1]Green [1]Package HDSP-HDSP-HDSP-HDSP-HDSP- DescriptionDrawingA401A151750174017801Common Anode Right A Hand Decimal750274027802Common Anode Right Hand B Decimal, Colon A403A153750374037803Common Cathode Right C Hand Decimal750474047804Common Cathode Right Hand D Decimal, ColonA157750774077807Common Anode ±1. Overflow E A158750874087808Common Cathode ±1. OverflowFNote:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSP-A80X Yellow, and HDSP-A90X Green data sheet for low current operation.HDSP-740x Series HDSP-750x Series HDSP-780x Series HDSP-A15x Series HDSP-A40x Series±1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode.These displays are ideal for most applications. Pin for pin equiv-alent displays are also available in a low current design. The low current displays are ideal forportable applications. For additional information see the Low Current Seven Segment Displays.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical OptionColor Bin Options [1,2]0: No Color Bin Limitation3: Color Bins 3- and 3+ only (applicable for Yellow devices only)Z: Color Bins 2- and 3+ only (applicable for Yellow devices only)Maximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]1: Common Anode 2: Common Anode 3: Common Cathode 4: Common CathodeDevice Specific Configuration [1]Refer to Respective DatasheetPackage [1]A: 7.6 mm (0.3 inch) Single Digit Seven Segment DisplayPackage Dimensions NOTES:1. ALL DIMENSIONS IN MILLIMETRES (INCHES).2. MAXIMUM.3. ALL UNTOLERANCED DIMENSIONS AREFOR REFERENCE ONLY.4. REDUNDANT ANODES.5. REDUNDANT CATHODES.6. FOR HDSP-7400/-7800 SERIES PRODUCT ONLY.Device Series HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment [1,2,5]I V6.914.0mcd I F = 20 mA (Digit Average)1.8VI F = 20 mAForward Voltage/Segment or DPV F2.03.0V I F = 100 mAA15xPeak Wavelength λPEAK 645nm Dominant Wavelength [3]λd 637nm Reverse Voltage/Segment or DP [4]V R 3.015.0V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DPThermal Resistance LED Junction-R θJ-PIN255°C/W/Segto-PinAlGaAs RedElectrical/Optical Characteristics at T A = 25°C Absolute Maximum RatingsAlGaAs Red HER/Orange Yellow GreenHDSP-A150HDSP-7500/-A40X HDSP-7400HDSP-7800DescriptionSeriesSeries SeriesSeriesUnits Average Power per Segment or DP 9610580105mW Peak Forward Current per 160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per 40[2]30[4]20[6]30[8]mASegment or DPOperating Temperature Range –20 to +100[9]–40 to +100°CStorage Temperature Range –55 to +100°C Reverse Voltage per Segment or DP 3.0V Lead Solder Temperature for 3Seconds (1.59 mm [0.063 in.] 260°Cbelow seating plane)Notes:1. See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below –20°C, contact your local Agilent components sales office or an authorized distributor.High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,6]360980I F = 5 mA(Digit Average)I Vµcd5390I F = 20 mA Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA 750x Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN200°C/W/Segto-PinOrangeDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,6]I V0.70mcd I F = 5 mA(Digit Average)Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA A40x Peak WavelengthλPEAK600nmDominant Wavelength[3]λd603nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN200°C/W/Segto-PinYellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,7]225480I F = 5 mA(Digit Average)I Vµcd2740I F = 20 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mA 740x Peak WavelengthλPEAK583nmDominant Wavelength[3,9]λd581.5586592.5nmReverse Voltage/Segment or DP[4]V R 3.050.0V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN200°C/W/Segto-PinHigh Performance GreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,8]8603000I F = 10 mA(Digit Average)I Vµcd6800I F = 20 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mA 780x Peak WavelengthλPEAK566nmDominant Wavelength[3,9]λd571577nmReverse Voltage/Segment or DP[4]V R 3.050.0V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN200°C/W/Segto-PinNotes:1. Case temperature of device immediately prior to the intensity measurement is 25°C.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color ofthe device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation the AlGaAs HDSP-A101 series displays are recommended.6. For low current operation the HER HDSP-7511 series displays are recommended.7. For low current operation the Yellow HDSP-A801 series displays are recommended.8. For low current operation the Green HDSP-A901 series displays are recommended.9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.AlGaAs Redt – PULSE DURATION – µs P101100R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D M A X I M U M D C C U R R E N TI P E A K F I M A X DC Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 2. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature.Figure 1. Maximum Allowed Peak Current vs.Pulse Duration – AlGaAs Red.Figure 5. Relative Efficiency (LuminousIntensity per Unit Current) vs. Peak Current.Figure 3. Forward Current vs.Forward Voltage.T A – AMBIENT TEMPERATURE – °C I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T– m AV F – FORWARD CURRENT – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m AI PEAK – PEAK FORWARD CURRENT PER SEGMENT – mAηP E A K – N O R M A L I Z E D R E L A T I V E E F F I C I E N C YI F – FORWARD CURRENT PER SEGMENT – mA R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )Figure 12. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.ηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R ,O R A N G E A N D Y E L L O W , A N D 10 m A F O R G R E E N )I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mAHER, Yellow, Green, OrangeFigure 6. Maximum Tolerable Peak Current vs.Pulse Duration – HER, Orange.Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.Figure 10. Forward Current vs.Forward Voltage Characteristics.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 8. Allowable Peak Current vs.Pulse Duration – Green.Figure 9. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature.R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K F I M A X D C t – PULSE DURATION – µs P 101100DCR A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K FI M A X D C t – PULSE DURATION – µs P101100R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K FI M A X D C t – PULSE DURATION – µs P10110040051015202530352010090807060504030T – AMBIENT TEMPERATURE – °C AI M A X –M A X I M U M D C C U R R E N T P E R S E G M E N T – m AD C120110504510080604020I – F O R W A R D C U R R E N T P E R S E G M E N T – m A FV – FORWARD VOLTAGE – V F R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R A N D )t (Y E L L O W A N D T O1 A T 10 m A F O R G R E E N )1510205301025I – FORWARD CURRENT PER SEGMENT – mA FHDSP-A15x IV Bin Category Min.Max.M 7.0713.00N 10.6019.40O 15.9029.20P 23.9043.80Q 35.8065.60Intensity Bin Limits (mcd)AlGaAs RedHDSP-750x IV Bin Category Min.Max.B 0.3420.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.177HERHDSP-740x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.4134.425YellowHDSP-780x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01GreenOrangeHDSP-A40XIV Bin Category Min.Max.A 0.2840.433B 0.3540.541C 0.4430.677D 0.5540.846E 0.692 1.057F 0.856 1.322G 1.082 1.652H 1.352 2.066I 1.692 2.581J 2.114 3.227K 2.641 4.034L 3.300 5.042M 4.127 6.303N 5.1577.878Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningCleaning agents from the ketonefamily (acetone, methyl ethylketone, etc.) and from thechlorinated hydrocarbon family(methylene chloride, trichloro-ethylene, carbon tetrachloride,etc.) are not recommended forcleaning LED parts. All of thesevarious solvents attack or dissolvethe encapsulating epoxies used toform the package of plastic LEDparts.For further information onsoldering LEDs, please refer toApplication Note 1027.元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(408) 654-8675Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 271 2451India, Australia, New Zealand: (+65) 271 2394Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 271 2194Malaysia, Singapore: (+65) 271 2054Taiwan: (+65) 271 2654Data subject to change.Copyright © 2002 Agilent Technologies, Inc.Obsoletes 5988-0382ENFebruary 11, 20025988-4434EN。
5082-B05G-KM200中文资料
DescriptionThe 18:88 and 88:88 0.56" Four Digit Seven Segment Displays have surface painted in neutral gray and black for enhanced on/off contrast. All devices are available in either common anode or common cathode configuration with tinted green segments or untinted segments.Agilent HDSP-B0xG18:88 and 88:88 0.56" Four Digit GaP Green Seven Segment DisplayData SheetFeatures•Excellent appearance•Evenly illuminated segments•Gray face for optimum on/offcontrast•Choice of colors: Green•Choice of character size:0.56 inchFRONT SIDE2 – ∅1.70RIGHT SIDEA A A DDD C F EF E F EB CB C B C GGGDP3DP2DIGIT 2DIGIT 3DIGIT 4DIGIT 1AF EB G D NOTE:ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm.Pin Configuration Function Pin HDSP-B01G/B03G/B05G/B07G/B09G HDSP-B02G/B04G/B06G/B08G/B10G 1Anode E Cathode E 2Anode D Cathode D 3Anode DP Cathode DP 4Anode C Cathode C 5Anode GCathode G6Digit 4 Common Cathode Digit 4 Common Anode 7Anode BCathode B8Digit 3 Common Cathode Digit 3 Common Anode 9Digit 2 Common Cathode Digit 2 Common Anode 10Anode F Cathode F 11Anode ACathode A12Digit 1 Common CathodeDigit 1 Common AnodeFRONT SIDE2 – ∅1.70RIGHT SIDEAA A DDD B CF EF E F EB CB C B C GGGDP3DP2DIGIT 2DIGIT 3DIGIT 4DIGIT 1NOTE:ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm.HDSP-B01G and HDSP-B05G (Common Cathode)HDSP-B02G and HDSP-B06G (Common Anode)DIGIT 1DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP 3DIGIT 1DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP 3HDSP-B03G, HDSP-B07G, and HDSP-B09G (Common Cathode)HDSP-B04G, HDSP-B08G, and HDSP-B10G (Common Anode)DIGIT 1DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP3DIGIT 1DIGIT 2DIGIT 3DIGIT 4A 11B 7C 4D 2E 1F 10G 5DP 3DevicesHDSP-DescriptionB01G88:88 0.56" Green 4 Digit, Tinted Green, Common Cathode, Display 18:88, Gray Color Surface B02G88:88 0.56" Green 4 Digit, Tinted Green, Common Anode, Display 18:88, Gray Color Surface B03G88:88 0.56" Green 4 Digit, Tinted Green, Common Cathode, Display 88:88, Gray Color Surface B04G88:88 0.56" Green 4 Digit, Tinted Green, Common Anode, Display 88:88, Gray Color Surface B05G88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 18:88, Gray Color SurfaceB06G88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 18:88, Gray Color SurfaceB07G88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 88:88, Gray Color SurfaceB08G88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 88:88, Gray Color SurfaceB09G88:88 0.56" Green 4 Digit, Untinted, Common Cathode, Display 88:88, Black Color SurfaceB10G88:88 0.56" Green 4 Digit, Untinted, Common Anode, Display 88:88, Black Color SurfacePart Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin LimitationMaximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]G: GreenDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]Refer to Respective DatasheetNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contactyour nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typicallyrestricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet forspecific bin limit information.Electrical/Optical Characteristics at T A = 25˚C Device Series HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/SegmentI V20003200µcd I F = 10 mA(Digit Average)32004500All DevicesForward Voltage/Segment or DP V F 1.802.20 2.60V I F = 20 mA Peak Wavelength λPEAK 568nm I F = 20 mA Dominant Wavelength λd 573nmI F = 20 mA Luminous Intensity I V-M 2:1I F = 10 mA Matching Ratio Reverse CurrentI R100µAV R = 5 VNotes:1.Typical specification for reference only. Do not exceed absolute maximum ratings.2.The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.Absolute Maximum RatingsDescriptionGreen Units Average Power per Segment or DP65mW Peak Forward Current per Segment or DP 100mA DC Forward Current per Segment or DP 25mA Operating Temperature Range–40 to +105˚C Storage Temperature Range–40 to +105˚C Reverse Voltage per Segment or DP5V Wavesoldering Temperature for 3 seconds 2 mm below body250˚CNote:1.Derate above 40˚C at 0.33 mA/˚C for green.B01G, B02G, B03G, B04G B05G, B06G, B07G, B08G,B09G, B10G Intensity Bin Limits (µcd at 10 mA)Device Series HDSP-B01G, B02G, B03G, B04G B05G, B06G, B07G, B08G, B09G, B10GBin Name Min.[1]Max.[1]Min.[1]Max.[1]K 20003200NA NA L 3200505032005050MNA NA50508000Note:1.Tolerance for each bin limit is ±10%.Color Categories (Tolerance ± 1 nm)Rank Symbol Hue Range Unit 22573.5–576.5nm 33570.5–573.5nmContrast EnhancementFor information on contrast enhancement, please see Application Note 1015.Soldering/CleaningCleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from thechlorinated hydrocarbon family (methylene chloride,trichloroethylene, carbon tetrachloride, etc.) are notrecommended for cleaning LED parts. All these various solvents attack or dissolve theencapsulating epoxies used to form the package of plastic LED parts.Figure 1. Maximum allowable DC current vs.ambient temperature.Figure 2. Forward current vs. forward voltage.Figure 3. Relative luminous intensity vs. DC forward current.Figure 4. Relative efficiency (luminous intensity per unit current) vs. peak current.I D C – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °CI F – F O R W A R D C U R R E N T P E R S E G M E NT – m AV F – FORWARD VOLTAGE – VR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 mA F O R G R E E N )I F – DC FORWARD CURRENT – mA8642R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550PEAK FORWARD CURRENTPER SEGMENT – mA/semiconductorsFor product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152(Domestic/Interna-tional), or 0120-61-1280(Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5988-5381EN June 30, 20045988-7859EN。
BL-505 508,808,805 8016 8024百兆交换机说明书中文
本手册旨在帮助您正确使用本公司的BL-S505/ BL-S805/BL-S508/BL-S808/ BL-S8016S/ BL-S8024, 10/100M自适应以太网交换机系列。
物品清单：小心打开包装盒，检查包装盒里面应有以下配件：◆交换机一台◆电源适配器一个◆用户手册一本◆保修卡一张若发现物品短缺或损坏，请与经销商联系。
注意：BL-S508系列的交换机和 BL-S505系列的交换机区别在于前者是铁壳的,后者是塑壳的，BL-S808和BL-S805的区别同上。
规定：手册中所提到的交换机，如无特殊说明，均指BL-S505/ BL-S805/BL-S508/ BL-S808/ BL-S8016S/ BL-S8024 10/100M自适应以太网交换机。
产品概述：本系列交换机，所有端口都具备网络自适应、端口自动翻转功能(AUTO MDI/MDIX)提供简单，经济的组网方案，并且可以无缝衔接10M.100M网络。
有效提高网络性能，具有使用简单，组网灵活，安装方便，稳定安全，性价比高等特点，是您组网的理想选择。
性能特征：◇遵循IEEE802.3 10BASE-T以太网及IEE 802.3u 100BASE-TX快速以太网标准；◇提供5/8/16/24个10/100Mbps速率和全/半双工模式自适应的RJ45端口；◇每个端口都具备自适应MDI/MDIX功能；◇动态分配缓冲区以均衡网络负载并防止包阻塞及丢失；◇具有MAC地址自动学习、自动更新功能；◇面板指示灯监视交换机工作状态及帮助用户诊断故障；◇存储转发交换机制确保数据完整性及速度匹配；◇具有线性数据转发速率和数据过滤速率；◇符合以太网应用标准，完全胜任互连网应用。
兼容原有设备，为企业提供最佳升级方案。
安装方法：本系列交换机中的BL-S8024支持标准机架式安装,其余型号适合桌面安装方式，请注意不要与其他硬物体碰撞，以防机壳划伤，安装时注意以下几点：◇不要在交换机上放置重物。
5082-303E-0K000中文资料
DescriptionThese slim font seven segment displays incorporate a new slim font character design. This slim font features narrow width,specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted aneutral gray for enhanced on/off contrast.Agilent HDSP-301x/303x Series HDSP-561x/563x Series 10 mm and 13 mm Slim Font Seven Segment DisplaysData SheetFeatures•Excellent appearance •Slim font design •Mitered corners, evenly illuminated segments•Gray face for optimum on/off contrast •Choice of colors: HER, green,yellow, and AlGaAs •Choice of character size: 10 mm and 13 mm •Characterized for luminous intensityDevices HER Green Yellow AlGaAs HDSP-HDSP-HDSP-HDSP-Description301E 301G 301Y 301A Common Anode, 10 mm Display 303E 303G 303Y 303A Common Cathode, 10 mm Display 561E 561G 561Y 561A Common Anode, 13 mm Display 563E563G563Y563ACommon Cathode, 13 mm DisplayAll devices are available in either common anode or commoncathode configuration with righthand decimal point.Part Numbering System5082- x xx x-x x x xxHDSP- x xx x-x x x xxMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin LimitationMaximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]A: AlGaAs RedE: High Efficiency RedG: GreenY: YellowDevice Specific Configuration[1]Refer to Respective Data SheetPackage[1]Refer to Respective Data SheetNotes:1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representativefor details.2. Bin options refer to shippable bins for a part-number. Color and Intensity Binbs are typically restricted to 1 bin per tube(exceptions may apply). Please refer to respective data sheet for specific bin limit information.Pin Function1G2F3Common A/C 4E5D6DP7C8Common A/C 9B10A7.006.40NOTE: QDSP-399G DOES NOT HAVE PIN 6.COUNTRY TOP SIDEFRONT VIEW RIGHT SIDE0.30 ± 0.05(0.012)6.001.85Pin Function 1E 2D3Common A/C 4C 5DP 6B 7A8Common A/C 9F 10G0.29 ± 0.08 TYP.(0.011)12345(0.023)(0.141)(0.100)NOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).2. UNLESS OTHERWISE STATED, TOLERANCES ARE ±0.25 mm.Absolute Maximum RatingsDescription HER Green Yellow AlGaAs Units Average Power per Segment or DP10510510537mW Peak Forward Current per Segment or DP90909045mA DC Forward Current per Segment or DP30303015mA Operating Temperature Range–40 to +80–40 to +80–40 to +80–20 to +80˚C Storage Temperature Range–40 to +80–40 to +80–40 to +80–40 to +80˚C Reverse Voltage per Segment or DP5555V Wavesoldering Temperature for 3 Seconds250250250250˚C 1.59 mm below bodyNotes:1.Derate above 33˚C at 0.34 mA/˚C for HER.2.Derate above 27˚C at 0.32 mA/˚C for Green.3.Derate above 30˚C at 0.33 mA/˚C for Yellow.4.Derate above 60˚C at 0.25 mA/˚C for AlGaAs.Electrical/Optical Characteristics at T A = 25˚CHERDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 301/303E Luminous Intensity/Segment I V 1.251 2.000mcd I F = 10 mA (Digit Average)Forward Voltage/Segment V F 1.90 2.50V I F = 20 mAor DPPeak WavelengthλPEAK635nm I F = 20 mADominant Wavelengthλd625nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinHERDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 561/563E Luminous Intensity/Segment I V 2.001 3.526mcd I F = 10 mA (Digit Average)Forward Voltage/Segment V F 1.90 2.50V I F = 20 mAor DPPeak WavelengthλPEAK635nm I F = 20 mADominant Wavelengthλd625nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 301/303G Luminous Intensity/Segment I V 2.001 3.200mcd I F = 10 mA (digit average)Forward Voltage/Segment V F 2.25 2.50V I F = 20 mAor DPPeak WavelengthλPEAK568nm I F = 20 mADominant Wavelengthλd573nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 561/563G Luminous Intensity/Segment I V 3.201 5.601mcd I F = 10 mA (Digit Average)Forward Voltage/Segment V F 2.25 2.50V I F = 20 mAor DPPeak WavelengthλPEAK568nm I F = 20 mADominant Wavelengthλd573nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinYellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 301/303Y Luminous Intensity/Segment I V 1.251 2.000mcd I F = 10 mA (Digit Average)Forward Voltage/Segment V F 2.15 2.50V I F = 20 mAor DPPeak WavelengthλPEAK589nm I F = 20 mADominant Wavelengthλd590nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 561/563Y Luminous Intensity/Segment I V 2.00 3.526mcd I F = 10 mA (Digit Average)Forward Voltage/Segment V F 2.15 2.50V I F = 20 mAor DPPeak WavelengthλPEAK589nm I F = 20 mADominant Wavelengthλd590nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinNotes:1.Typical specification for reference only. Do not exceed absolute maximum ratings.2.The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.AlGaAsDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 301/303A Luminous Intensity/Segment I V0.3200.505mcd I F = 1 mA (Digit Average)Forward Voltage/Segment V F 1.80 2.20V I F = 20 mAor DPPeak WavelengthλPEAK660nm I F = 20 mADominant Wavelengthλd643nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinAlGaAsDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions 561/563A Luminous Intensity/Segment I V0.5060.878mcd I F = 1 mA (Digit Average)Forward Voltage/Segment V F 1.80 2.20V I F = 20 mAor DPPeak WavelengthλPEAK660nm I F = 20 mADominant Wavelengthλd643nm I F = 20 mAReverse Current I R100µA V R = 5 VThermal Resistance LED RθJ–PIN351.5˚C/W/Seg.Junction-to-PinNotes:1.Typical specification for reference only. Do not exceed absolute maximum ratings.2.The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.HDSP-301E/303E/561E/563EIV Bin Category Min.Max.I 1.100 2.200K 1.800 3.600HDSP-561Y/563Y IV Bin Category Min.Max.K 1.800 3.600L 2.8005.600HDSP-301Y/303YIV Bin Category Min.Max.I 1.100 2.200K 1.8003.600HDSP-301A/303A/561A/563AIV Bin Category Min.Max.F 0.2800.560G 0.4500.900HDSP-301G/303G/561G/563GIV Bin Category Min.Max.K 1.800 3.600L 2.800 5.600Intensity Bin Limits (mcd)GreenYellowHERAlGaAs RedDominant Wavelength (nm)ColorBin Min.Max.Green 3570.00574.504567.00571.50Yellow2586.50590.003584.00587.50Color CategoriesNote:1. All categories are established for classification of products.Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.YellowFigure 1. Maximum allowable DC current vs.ambient temperature.Figure 2. Forward current vs. forward voltage.Figure 3. Relative luminous intensity vs. DC forward current.HDSP-301x/303x SeriesContrast EnhancementFor information on contrast enhancement, please see Application Note 1015.Soldering/CleaningCleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from thechlorinated hydrocarbon family (methylene chloride,Figure 4. Maximum allowable DC current vs.ambient temperature.Figure 5. Forward current vs. forward voltage.Figure 6. Relative luminous intensity vs. DC forward current.HDSP-561x/563x SeriesI D C – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °CI F – F O R W A R D C U R R E N TP E R S E G M E N T – m AV F – FORWARD VOLTAGE – V I D C – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °CI F – F O R W A R D C U R R E N TP E R S E G M E N T – m AV F – FORWARD VOLTAGE – V trichloroethylene, carbon tetrachloride, etc.) are notrecommended for cleaning LED parts. All of these varioussolvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R A N D Y E L L O W A N D T O 1 A T 10 m A F O R G R E E N )I F – DC FORWARD CURRENT – mA12682410R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R A N D Y E L L O W A N D T O 1 A T 10 m A F O R G R E E N )I F – DC FORWARD CURRENT – mA/semiconduc-torsFor product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Obsoletes 5980-2919ENJuly 11, 20045988-4352EN。
5082-7300资料
Agilent 5082-7300, -7302, and -7340Hexadecimal andNumeric DisplaysReliability Data SheetDescriptionThe following cumulative test results have been obtained from testing performed at Agilent Technologies in accordance with the latest revision ofMIL-STD-883.Agilent tests parts at the absolutemaximum rated conditionsrecommended for the device.The actual performance youobtain from Agilent partsdepends on the electrical andenvironmental characteristics ofyour application but will probablybe better than the performanceoutlined in Table 1.Failure Rate PredictionThe failure rate of semiconductor devices is determined by the junction temperature of the device. The relationship between ambient temperature and actual junction temperature is given by the following:T J (°C) = T A (°C) + θJA P AVG whereT A = ambient temperature in °CθJA = thermal resistance ofjunction-to-ambient in °C/wattP AVG = average power dissipatedin wattsThe estimated MTBF and failurerate at temperatures lower thanthe actual stress temperature canbe determined by using anArrhenius model for temperatureacceleration. Results of suchcalculations are shown in the tableon the following page using anactivation energy of 0.43 eV(reference MIL-HDBK-217).Table 1. Life TestsDemonstrated PerformanceStress Test Total Units Units Failure Rate Test Name Conditions Device Hrs.Tested Failed [3]MTBF [1](% /1K Hours) High Temperature T A = +100°C,514,0005140514,000 0.195 Operating Life V CC = 5.5 VNumeric CyclingPoint Typical PerformanceTable 2. Reliability PredictionsPoint Typical PerformancePerformance in Time [1]in Time [2](60% Confidence)(90% Confidence) Ambient Junction Failure Rate Failure Rate Temperature (°C)Temperature (°C)MTBF [1](%/1K Hours)MTBF [2](%/1K Hours)100140514,0000.195223,0000.448 90130694,0000.144301,0000.332 80120951,0000.105413,0000.242 701101,324,0000.076575,0000.174 601001,878,0000.053816,0000.123 50902,714,0000.0371,179,0000.085 40804,007,0000.0251,740,0000.057 30706,050,0000.0172,628,0000.038 20609,365,0000.0114,067,0000.025Notes:[1] The point typical MTBF (which represents 60% confidence level) is the total device hours divided by the number of failures. In thecase of zero failures, one failure is assumed for this calculation.[2] The 90% Confidence MTBF represents the minimum level of reliability performance which is expected from 90% of all samples. Thisconfidence interval is based on the statistics of the distribution of failures. The assumed distribution of failures is exponential. Thisparticular distribution is commonly used in describing useful life failures. Refer to MIL-STD-690B for details on this methodology.[3] A failure is any LED which does not emit light or the display’s inability to transmit information.Example of Failure Rate CalculationAssume a device operating 8 hours/day, 5 days/week. The utilization factor, given 168 hours/week is:(8 hours/day) x (5 days/week) / (168 hours/week) = 0.25The point failure rate per year (8760 hours) at 50°C ambient temperature is:(0.037% / 1K hours) x (0.25) x (8760 hours/year) = 0.081% per yearSimilarly, 90% confidence level failure rate per year at 50°C:(0.085% / 1K hours) x (0.25) x (8760 hours/year) = 0.186% per yearTable 3. Environmental TestsMIL-STD-883C Units Units Test Name Reference Test Conditions Tested Failed Temperature Cycle1010-40 to +100°C, 15 minute dwell and92612(4)5 minute transfer, 500 cyclesTemperature/–T A = +85°C, RH = 85%51516 Humidity Op Life V CC = 5.0 VoltsSolder Heat Resistance2003260°± 5°C, dwell time = 5 seconds, 2 times.19160Notes:[4] Failures after 20 temperature cycles are considered Infant Failures. Corrective action is required and has beenimplemented for all infant failures.Data subject to change.Copyright © 2000 Agilent Technologies, Inc.Obsoletes 5964-9632E5968-9715E (1/00)。
5082-333Y-KK300中文资料
DescriptionThis 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device isavailable in either common anodeAgilent HDSP-331x/332E/333x/334x Series 7.62 mm (0.3 inch) General Purpose Seven-Segment DisplayData SheetFeatures•Industry standard size•Industry standard pinout7.62 mm (0.4 inch) character height DIP lead on 2.54 mm •Choice of colorsHigh Efficiency Red (HER), Green,AlGaAs Red, and Yellow •Excellent appearanceEvenly lighted segments gray pack-age gives optimum contrast ± 50° viewing angle •Design flexibilityCommon anode or common cathode Single digitLeft and right hand decimal point•Categorized for luminous intensityGreen and yellow categorized for color Applications•Suitable for indoor use•Not recommended for industrial application, i.e., operating temperature requirementsexceeding +85˚C or below –25˚C [1]•Extreme temperature cycling not recommendedNote:1.For additional details, please contact your local Agilent sales office or an authorized distributor.Devices HERGreenAlGaAs Red Yellow DescriptionPackage Drawing HDSP-331E HDSP-331GHDSP-331AHDSP-331YCommon Anode, Right Hand and A Left Hand DecimalHDSP-332E Common Anode, Right Hand and Left A Hand Decimal without Pin 4, 5 and 12HDSP-333E HDSP-333G HDSP-333A HDSP-333Y Common Cathode, Right Hand B DecimalHDSP-334EHDSP-334GHDSP-334AHDSP-334YCommon Cathode, Right Hand DecimalCor common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red,and Yellow. The gray facedisplays are suitable for indoor use.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]A: AlGaAs RedE: High Efficiency Red G: Green Y: YellowDevice Specific Configuration [1]Refer to Respective Datasheet Package [1]Refer to Respective Datasheet∅1.1FRONT VIEWTOP END VIEWA F GB C L.DPD E DIMENSIONS IN MILLIMETERS (INCHES)R.DPNOTE: HDSP-332E DOES NOT HAVE PIN 4, 5 AND 12.Package Drawing APackage Drawing B∅1.1FRONT VIEW TOP END VIEWAF G BCDEDIMENSIONS IN MILLIMETERS (INCHES)R.DPPackage Drawing C∅1.1FRONT VIEW TOP END VIEWAF G BCDEDIMENSIONS IN MILLIMETERS (INCHES)R.DP611310872113.14 COMPIN N0.123678910111314CONNECTION CATHODE A CATHODE F COMMON ANODE CATHODE L.DP CATHODE E CATHODE D CATHODE R.DP CATHODE C CATHODE G CATHODE B COMMON ANODEPINS 4, 5, 12: NO CONNECTION FORHDSP-331E/331G/331Y/331A AND NO PIN FOR HDSP-332EHDSP-331E/331G/331Y/331A/332E9Common AnodeCommon Cathode14138761294.12 COMPIN NO.1246789121314CONNECTION ANODE F ANODE G COMMON CATHODEANODE E ANODE D ANODE C ANODE DP COMMON CATHODEANODE B ANODE AHDSP-333E/333G/333Y/333APINS 3, 5, 10, 11: NCCommon Cathode1098524371.6 COMPIN NO.12345678910CONNECTION COMMON CATHODEANODE E ANODE G ANODE F ANODE D COMMON CATHODEANODE DP ANODE C ANODE B ANODE AHDSP-334E/334G/334Y/334APINS 11, 12, 13, 14: NCElectrical/Optical Characteristics at T A = 25˚C High Efficiency Red (HER)Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 1.15mcd I F = 5 mA 0.81.80mcd I F = 10 mA Forward Voltage V F2.05 2.40V I F = 20 mAPeak Wavelength λPEAK 635nm Dominant Wavelength λd 620nm Reverse VoltageVR5VI R = 100 µAGreen Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 0.8 2.00mcd I F = 10 mA Forward Voltage V F 2.07V I F = 10 mA 1.802.25 2.60V I F = 20 mAPeak Wavelength λPEAK 568nm Dominant Wavelength λd 573nm Reverse VoltageVR5VI R = 100 µAAbsolute Maximum Ratings at T A = 25˚C DescriptionHERGreenAlGaAs Red Yellow HDSP-33xE HDSP-33xG HDSP-33xA HDSP-33xY Units Power Dissipation Segment 65653052mW Forward Current Segment25[1]25[2]15[3]20[4]mA Peak Forward Current per Segment 1001008080mA (1/10 Duty Factor at 10 kHz)Operating Temperature Range –35 to +85–35 to +85–35 to +85–35 to +85˚C Storage Temperature Range–35 to +85–35 to +85–35 to +85–35 to +85˚C Reverse Voltage per Segment or DP5555V Wave Soldering Temperature for 3 Seconds 250250250250˚C(at 2 mm Distance from the Body)Notes:1.Derate above 25˚C at 0.33 mA/˚C.2.Derate above 25˚C at 0.33 mA/˚C.3.Derate above 25˚C at 0.2 mA/˚C.4.Derate above 25˚C at 0.27 mA/˚C.331G 333G 334G331E 332E 333E 334EYellow Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 0.71mcd I F = 5 mA 0.801.50mcd I F = 10 mA Forward Voltage V F2.15 2.60V I F = 20 mAPeak Wavelength λPEAK 595nm Dominant Wavelength λd 590nm Reverse VoltageVR5VI R = 100 µAAlGaAs Red Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 3.93mcd I F = 5 mA 2.0014.20mcd I F = 10 mA Forward Voltage V F 1.85 2.00V I F = 20 mAPeak Wavelength λPEAK 660nm Dominant Wavelength λd 643nm Reverse VoltageVR5VI R= 100 µA331Y 333Y 334Y331A 333A 334AIntensity Bin Limits (mcd at 10 mA)HER/Green/Yellow AlGaAs RedBin Name Min.[1]Max.[1]Min.[1]Max.[1]G 0.801 1.250NA NA H 1.251 2.000NA NA I 2.001 3.200 2.001 3.200J NA NA 3.201 5.050KNA NA5.0518.000Note:1.Tolerance for each bin limit is ± 10%.Color Bin Limits (nm at 10 mA)Dominant Wavelength (nm)Color Bin Min.Max.Note:1.Tolerance for each bin limit is 1 nm.Figure 1. Maximum allowable average or DC current vs. ambient temperature.Figure 2. Forward current vs. forward voltage.Figure 3. Relative luminous intensity vs. DC forward current.High Efficiency Red (HER)Figure 4. Relative efficiency (luminousintensity per unit current) vs. peak current.020*********T A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A2.52.01.51.00.50510********IF – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E EF F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 7. Relative luminous intensity vs. DC forward current.Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 5. Maximum allowable average or DC current vs. ambient temperature.Figure 6. Forward current vs. forward voltage.Green30T A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.500510********I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 9. Maximum allowable average or DC current vs. ambient temperature.Figure 10. Forward current vs. forward voltage.Figure 11. Relative luminous intensity vs. DC forward current.Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current.AlGaAs RedT A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.500510********I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 13. Maximum allowable average or DC current vs. ambient temperature.Figure 14. Forward current vs. forward voltage.Figure 15. Relative luminous intensity vs. DC forward current.Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current.YellowT A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.52.52.01.51.00.50051015202530I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )353.0R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2/semicon-ductorsFor product information and a complete list of distributors, please go to our web site. For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Obsoletes 5988-2971ENJuly 17, 20045988-9421EN。
SMP100-xxxH225中文资料
®
SMP100-xxx SMP100-xxxH225
TRISIL TM
FEATURES BIDIRECTIONAL CROWBAR PROTECTION VOLTAGE RANGE : FROM 8V to 320V REPETITIVE PEAK PULSE CURRENT: IPP = 100 A (10/1000 µs) HOLDING CURRENT: IH = 150mA or 225mA LOW LEAKAGE CURRENT: IR = 2 µA max DESCRIPTION The SMP100 series are transient surge arrestors used for the protection of sensitive telecom equipment. MAIN APPLICATIONS Any sensitive equipment requiring protection against lightning strikes : ANALOG AND DIGITAL LINE CARDS MAIN DISTRIBUTION FRAMES TERMINALS AND TRANSMISSION EQUIPMENT GAS-TUBE REPLACEMENT BENEFITS NO AGEING AND NO NOISE IF DESTROYED, THE SMP100 FALLS INTO SHORT CIRCUIT,STILLENSURINGPROTECTION BOARD SPACE SAVING COMPLIES WITH THE FOLLOWING STANDARDS: CCITT K20 VDE0433 VDE0878 IEC-1000-4-5 FCC Part 68, lightning surge type A FCC Part 68, lightning surge type B BELLCORE TR-NWT-001089 First level BELLCORE TR-NWT-001089 Second level CNET l31-24
5082-4606-KG200中文资料
Features• Industry Standard Size • Industry Standard Pinout7.62 mm (0.300 inch) DIP Leads on 2.54 mm (0.100 inch) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red,Yellow, Green• Excellent Appearance Evenly Lighted Segments ±50° Viewing AngleOptimum Contrast Given byGray Top Surface for AlGaAs Red and Green DevicesRed Top Surface for HER Devices Yellow Top Surface for Yellow Devices• Design Flexibility Common Anode or Common Cathode Single DigitsLeft or Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing• Intensity and Color Selection AvailableSee Intensity and Color Selected Displays Data Sheet• Sunlight Viewable AlGaAsAlGaAs [1]HER [1]Yellow Green Package Red HDSP-5082-5082-HDSP-DescriptionDrawing7610762036007.6 mm Common Anode Left Hand Decimal A 7611762136017.6 mm Common Anode Right Hand Decimal B 7613762336037.6 mm Common Cathode Right Hand Decimal C 7616762636067.6 mm Universal ±1. Overflow Right Hand Decimal [2]D E15076507660460010.9 mm Common Anode Left Hand Decimal E E15176517661460110.9 mm Common Anode Right Hand Decimal F E15376537663460310.9 mm Common Cathode Right Hand Decimal G E15676567666460610.9 mm Universal ±1. Overflow Right Hand Decimal [2]HNotes:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation.2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.Devices5082-761x Series 5082-762x Series 5082-765x Series 5082-766x Series HDSP-360x Series HDSP-460x Series HDSP-E15x Series7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays Technical DataDescriptionThe 7.6 mm (0.3 inch) and 10.9mm (0.43 inch) LED sevensegment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet).These devices use an industry standard size package andpinouts. All devices are available as either common anode or common cathode.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation4: Color Bin 4 Only (applicable for Green devices only)B: Color Bins 2 and 3 (applicable for Yellow devices only)Maximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]0: Common Anode1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa-tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.NOTES;1. DIMENSIONS IN MILLIMETRES AND (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. UNUSED DP POSITION.5. SEE INTERNALCIRCUIT DIAGRAM.6. REDUNDANT CATHODE.7. SEE PART NUMBER TABLE FOR L.H.D.P.AND R.H.D.P.DESIGNATION.8. FOR YELLOW AND GREEN DEVICES ONLY.Package DimensionsThese displays are ideal for most applications. Pin for pin equiva-lent displays are also available in a low current or high lightambient design. The low currentInternal Circuit DiagramAbsolute Maximum RatingsAlGaAs Red HER Yellow GreenHDSP-E1505082-7610/5082-7620/HDSP-3600/ Description Series7650 Series7660 Series4600 Series Units Average Power per Segment or DP9610580105mW Peak Forward Current per160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per40[2]30[4]20[6]30[8]mA Segment or DPOperating Temperature Range-20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for3 Seconds (1.59 mm [0.063 in.] 250°Cbelow Body)Notes:1.See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V8.515.0mcd I F = 20 mA(Digit Average)1.8V I F = 20 mAForward Voltage/Segment or DP V F2.03.0V I F = 100 mAHDSP-E15x Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN340°C/W/Segto-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions 5082-761x Luminous Intensity/Segment[1,2,6]340800µcd I F = 5 mA (Digit Average)I V5082-765x3401115µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nm AllReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN280°C/WJunction-to-PinDevice Series ParameterSymbol Min.Typ.Max.Units Test Conditions 5082-762x Luminous Intensity/Segment [1,2]205620µcdI F = 5 mA(Digit Average)I V5082-766x290835µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mAPeak WavelengthλPEAK 583nm Dominant Wavelength [3,7]λd 581.5586592.5nm AllReverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ-PIN280°C/W/SegJunction-to-PinYellowNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series.6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series.7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.High Performance GreenDevice Test Series ParameterSymbol Min.Typ.Max.Units Conditions HDSP-360x Luminous Intensity/Segment [1,2]8602700µcdI F = 10 mA(Digit Average)I VHDSP-460x10304000µcd I F = 10 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mAPeak WavelengthλPEAK 566nm Dominant Wavelength [3,7]λd 571577nm AllReverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ -PIN280°C/W/SegJunction-to-PinFigure 3. Forward Current vs. Forward Voltage.Figure 2. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.AlGaAs RedI D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )0I F – FORWARD CURRENT PER SEGMENT – mA2.001.501.250.750.2520401.751.000.5010305152535ηP E A K – N O R M A L I Z E D R E L A T I V E EF F I C I E N C Y0.5I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA50.0150.05.0HER, Yellow, GreenFigure 8. Allowable Peak Current vs.Pulse Duration – Green Series.Figure 9. Maximum Allowable DC Current vs.Ambient Temperature.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 10. Forward Current vs.Forward Voltage.Figure 12. Relative LuminousEfficiency (Luminous Intensity per Unit Current) vs. Peak Current.HDSP-E15x IV Bin Category Min.Max.L 8.6715.90M 13.0023.80N 19.5035.80O 29.3053.60P 43.9080.50Intensity Bin Limits (mcd)AlGaAs RedHER5082-761x IV Bin Category Min.Max.B 0.3690.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.1775082-765xIV Bin Category Min.Max.B 0.3470.593C 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751Yellow5082-762x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.413 4.4255082-766xIV Bin Category Min.Max.C 0.2970.543D 0.4450.817E 0.669 1.225F 1.003 1.838G 1.504 2.758H 2.2564.137HDSP-460xIV Bin Category Min.Max.G 1.03 1.88H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26GreenHDSP-360x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningFor information on solderingLEDs, please refer to ApplicationNote 1027.元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5963-7394EJuly 17, 20045988-3325EN。
5082-H101-CI000中文资料
Features• Low Power Consumption • Industry Standard Size• Industry Standard Pinout • Choice of Character Size7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Yellow, Green• Excellent Appearance Evenly Lighted Segments±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Dual DigitLeft and Right Hand Decimal Points±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display• Excellent for Long Digit String Multiplexing DescriptionThese low current seven segment displays are designed for applica-tions requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available.Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applica-tions. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Low Current Seven SegmentDisplays Technical Data HDSP-335x SeriesHDSP-555x SeriesHDSP-751x SeriesHDSP-A10x Series HDSP-A80x Series HDSP-A90x Series HDSP-E10x Series HDSP-F10x Series HDSP-G10x Series HDSP-H10x Series HDSP-K12x, K70x Series HDSP-N10x SeriesHDSP-N40x SeriesDevicesAlGaAs HER Yellow Green Package HDSP-HDSP-HDSP-HDSP-Description Drawing A1017511A801A9017.6 mm Common Anode Right Hand Decimal A A1037513A803A9037.6 mm Common Cathode Right Hand Decimal B A1077517A807A9077.6 mm Common Anode ±1. Overflow C A1087518A808A9087.6 mm Common Cathode ±1. Overflow D F10110 mm Common Anode Right Hand Decimal E F10310 mm Common Cathode Right Hand Decimal F F10710 mm Common Anode ±1. Overflow G F10810 mm Common Cathode ±1. Overflow H G10110 mm Two Digit Common Anode Right Hand Decimal X G10310 mm Two Digit Common Cathode Right Hand Decimal Y E100335010.9 mm Common Anode Left Hand Decimal I E101335110.9 mm Common Anode Right Hand Decimal J E103335310.9 mm Common Cathode Right Hand Decimal K E106335610.9 mm Universal ±1. Overflow[1]L H101555114.2 mm Common Anode Right Hand Decimal M H103555314.2 mm Common Cathode Right Hand Decimal N H107555714.2 mm Common Anode ±1. Overflow O H108555814.2 mm Common Cathode ±1. Overflow P K121K70114.2 mm Two Digit Common Anode Right Hand Decimal R K123K70314.2 mm Two Digit Common Cathode Right Hand Decimal S N10020 mm Common Anode Left Hand Decimal Q N101N40120 mm Common Anode Right Hand Decimal T N103N40320 mm Common Cathode Right Hand Decimal U N10520 mm Common Cathode Left Hand Decimal V N106N40620 mm Universal ±1. Overflow[1]W Note:1. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagrams L or W.Part Numbering System5082-x xx x-x x x xxHDSP-x xx x-x x x xxMechanical Options[1]00: No mechanical optionColor Bin Options[1,2]0: No color bin limitationMaximum Intensity Bin[1,2]0: No maximum intensity bin limitationMinimum Intensity Bin[1,2]0: No minimum intensity bin limitationDevice Configuration/Color[1]G: GreenDevice Specific Configuration[1]Refer to respective datasheetPackage[1]Refer to Respective datasheetNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative fordetails.2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (excep-tions may apply). Please refer to respective datasheet for specific bin limit information.Package DimensionsPackage Dimensions (cont.)Package Dimensions (cont.)*The Side View of package indicates Country of Origin.Package Dimensions (cont.)Package Dimensions (cont.)Package Dimensions (cont.)Internal Circuit DiagramInternal Circuit Diagram (cont.)Absolute Maximum RatingsAlGaAs Red - HDSP-HERA10X/E10X/H10X HDSP-751X/Yellow GreenK12X/N10X/N40X335X/555X/HDSP-A80X HDSP-A90X Description F10X, G10X Series K70X Series Series Series Units Average Power per Segment or DP375264mW Peak Forward Current per 45mA Segment or DPDC Forward Current per15[1]15[2]mA Segment or DPOperating Temperature Range-20 to +100-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment 3.0V or DPWave Soldering Temperature for 3Seconds (1.60 mm [0.063 in.] below 250°C seating body)Notes:1. Derate above 91°C at 0.53 mA/°C.2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions315600I F = 1 mA A10x3600I F = 5 mA330650I F = 1 mAF10x, G10x3900I F = 5 mA390650I F = 1 mA E10x Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)3900I F = 5 mA400700I F = 1 mAH10x, K12x4200I F = 5 mA270590I F = 1 mAN10x, N40x3500I F = 5 mA1.6I F = 1 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA1.82.2I F = 20 mA PkAll Devices Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2 mV mV/°CV F/Segment or DPA10x255F10x, G10x320E10x340Thermal Resistance LED RθJ-PIN°C/W/SegH10x, K12x Junction-to-Pin400N10x, N40x430High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions160270I F = 2 mA 751x1050I F = 5 mA200300I F = 2 mA Luminous Intensity/Segment[1,2]I V mcd(Digit Average)1200I F = 5 mA335x, 555x,K70x270370I F = 2 mA1480I F = 5 mA1.6I F = 2 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA2.1 2.5I F = 20 mA Pk All Devices Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DP751x200335x Thermal Resistance LED RθJ-PIN280°C/WJunction-to-Pin555x, K70x345YellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250420I F = 4 mA(Digit Average)I V mcd1300I F = 10 mA1.7I F = 4 mAForward Voltage/Segment or DP V F 1.8V I F = 5 mA A80x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK583nmDominant Wavelength[3,5]λd581.5585592.5nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250475I F = 4 mA(Digit Average)I V mcd1500I F = 10 mA1.9I F = 4 mAForward Voltage/Segment or DP V F 2.0V I F = 10 mA A90x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of thedevice.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.AlGaAs RedIntensity Bin Limits (mcd)AlGaAs RedHDSP-A10xIV Bin Category Min.Max.E0.3150.520F0.4280.759G0.621 1.16H0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55HDSP-E10x/F10x/G10xIV Bin Category Min.Max.D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-H10x/K12xIV Bin Category Min.Max.C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50HDSP-N10xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued HERHDSP-751xIV Bin Category Min.Max.B0.1600.240C0.2000.300D0.2500.385E0.3150.520F0.4280.759G0.621 1.16HDSP-751xIV Bin Category Min.Max.B0.2400.366C0.3000.477D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-555x/K70xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued YellowHDSP-A80xIV Bin Category Min.Max.D0.2500.385E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60GreenHDSP-A90xIV Bin Category Min.Max.E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60Electrical/OpticalFor more information on electrical/optical characteristics, please see Application Note 1005.Contrast Enhancement For information on contrast enhancement, please see Application Note 1015.Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.Note:All categories are established for classification of products. Productsmay not be available in all categories. Please contact your localAgilent representatives for further clarification/information.Color Categories/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788 6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6271 2451India, Australia, New Zealand: (+65) 6271 2394Japan: (+81 3) 3335-8152(Domestic/International), or0120-61-1280(Domestic Only)Korea: (+65) 6271 2194Malaysia, Singapore: (+65) 6271 2054Taiwan: (+65) 6271 2654Data subject to change.Copyright © 2005 Agilent Technologies, Inc.Obsoletes 5988-8412ENJanuary 19, 20055989-0080EN。
5082-E107-EG000中文资料
Features• Low Power Consumption • Industry Standard Size• Industry Standard Pinout • Choice of Character Size7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Yellow, Green• Excellent Appearance Evenly Lighted Segments±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Dual DigitLeft and Right Hand Decimal Points±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display• Excellent for Long Digit String Multiplexing DescriptionThese low current seven segment displays are designed for applica-tions requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available.Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applica-tions. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Low Current Seven SegmentDisplays Technical Data HDSP-335x SeriesHDSP-555x SeriesHDSP-751x SeriesHDSP-A10x Series HDSP-A80x Series HDSP-A90x Series HDSP-E10x Series HDSP-F10x Series HDSP-G10x Series HDSP-H10x Series HDSP-K12x, K70x Series HDSP-N10x SeriesHDSP-N40x SeriesDevicesAlGaAs HER Yellow Green Package HDSP-HDSP-HDSP-HDSP-Description Drawing A1017511A801A9017.6 mm Common Anode Right Hand Decimal A A1037513A803A9037.6 mm Common Cathode Right Hand Decimal B A1077517A807A9077.6 mm Common Anode ±1. Overflow C A1087518A808A9087.6 mm Common Cathode ±1. Overflow D F10110 mm Common Anode Right Hand Decimal E F10310 mm Common Cathode Right Hand Decimal F F10710 mm Common Anode ±1. Overflow G F10810 mm Common Cathode ±1. Overflow H G10110 mm Two Digit Common Anode Right Hand Decimal X G10310 mm Two Digit Common Cathode Right Hand Decimal Y E100335010.9 mm Common Anode Left Hand Decimal I E101335110.9 mm Common Anode Right Hand Decimal J E103335310.9 mm Common Cathode Right Hand Decimal K E106335610.9 mm Universal ±1. Overflow[1]L H101555114.2 mm Common Anode Right Hand Decimal M H103555314.2 mm Common Cathode Right Hand Decimal N H107555714.2 mm Common Anode ±1. Overflow O H108555814.2 mm Common Cathode ±1. Overflow P K121K70114.2 mm Two Digit Common Anode Right Hand Decimal R K123K70314.2 mm Two Digit Common Cathode Right Hand Decimal S N10020 mm Common Anode Left Hand Decimal Q N101N40120 mm Common Anode Right Hand Decimal T N103N40320 mm Common Cathode Right Hand Decimal U N10520 mm Common Cathode Left Hand Decimal V N106N40620 mm Universal ±1. Overflow[1]W Note:1. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagrams L or W.Part Numbering System5082-x xx x-x x x xxHDSP-x xx x-x x x xxMechanical Options[1]00: No mechanical optionColor Bin Options[1,2]0: No color bin limitationMaximum Intensity Bin[1,2]0: No maximum intensity bin limitationMinimum Intensity Bin[1,2]0: No minimum intensity bin limitationDevice Configuration/Color[1]G: GreenDevice Specific Configuration[1]Refer to respective datasheetPackage[1]Refer to Respective datasheetNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative fordetails.2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (excep-tions may apply). Please refer to respective datasheet for specific bin limit information.Package DimensionsPackage Dimensions (cont.)Package Dimensions (cont.)*The Side View of package indicates Country of Origin.Package Dimensions (cont.)Package Dimensions (cont.)Package Dimensions (cont.)Internal Circuit DiagramInternal Circuit Diagram (cont.)Absolute Maximum RatingsAlGaAs Red - HDSP-HERA10X/E10X/H10X HDSP-751X/Yellow GreenK12X/N10X/N40X335X/555X/HDSP-A80X HDSP-A90X Description F10X, G10X Series K70X Series Series Series Units Average Power per Segment or DP375264mW Peak Forward Current per 45mA Segment or DPDC Forward Current per15[1]15[2]mA Segment or DPOperating Temperature Range-20 to +100-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment 3.0V or DPWave Soldering Temperature for 3Seconds (1.60 mm [0.063 in.] below 250°C seating body)Notes:1. Derate above 91°C at 0.53 mA/°C.2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions315600I F = 1 mA A10x3600I F = 5 mA330650I F = 1 mAF10x, G10x3900I F = 5 mA390650I F = 1 mA E10x Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)3900I F = 5 mA400700I F = 1 mAH10x, K12x4200I F = 5 mA270590I F = 1 mAN10x, N40x3500I F = 5 mA1.6I F = 1 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA1.82.2I F = 20 mA PkAll Devices Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2 mV mV/°CV F/Segment or DPA10x255F10x, G10x320E10x340Thermal Resistance LED RθJ-PIN°C/W/SegH10x, K12x Junction-to-Pin400N10x, N40x430High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions160270I F = 2 mA 751x1050I F = 5 mA200300I F = 2 mA Luminous Intensity/Segment[1,2]I V mcd(Digit Average)1200I F = 5 mA335x, 555x,K70x270370I F = 2 mA1480I F = 5 mA1.6I F = 2 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA2.1 2.5I F = 20 mA Pk All Devices Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DP751x200335x Thermal Resistance LED RθJ-PIN280°C/WJunction-to-Pin555x, K70x345YellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250420I F = 4 mA(Digit Average)I V mcd1300I F = 10 mA1.7I F = 4 mAForward Voltage/Segment or DP V F 1.8V I F = 5 mA A80x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK583nmDominant Wavelength[3,5]λd581.5585592.5nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250475I F = 4 mA(Digit Average)I V mcd1500I F = 10 mA1.9I F = 4 mAForward Voltage/Segment or DP V F 2.0V I F = 10 mA A90x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of thedevice.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.AlGaAs RedIntensity Bin Limits (mcd)AlGaAs RedHDSP-A10xIV Bin Category Min.Max.E0.3150.520F0.4280.759G0.621 1.16H0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55HDSP-E10x/F10x/G10xIV Bin Category Min.Max.D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-H10x/K12xIV Bin Category Min.Max.C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50HDSP-N10xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued HERHDSP-751xIV Bin Category Min.Max.B0.1600.240C0.2000.300D0.2500.385E0.3150.520F0.4280.759G0.621 1.16HDSP-751xIV Bin Category Min.Max.B0.2400.366C0.3000.477D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-555x/K70xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued YellowHDSP-A80xIV Bin Category Min.Max.D0.2500.385E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60GreenHDSP-A90xIV Bin Category Min.Max.E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60Electrical/OpticalFor more information on electrical/optical characteristics, please see Application Note 1005.Contrast Enhancement For information on contrast enhancement, please see Application Note 1015.Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.Note:All categories are established for classification of products. Productsmay not be available in all categories. Please contact your localAgilent representatives for further clarification/information.Color Categories/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788 6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6271 2451India, Australia, New Zealand: (+65) 6271 2394Japan: (+81 3) 3335-8152(Domestic/International), or0120-61-1280(Domestic Only)Korea: (+65) 6271 2194Malaysia, Singapore: (+65) 6271 2054Taiwan: (+65) 6271 2654Data subject to change.Copyright © 2005 Agilent Technologies, Inc.Obsoletes 5988-8412ENJanuary 19, 20055989-0080EN。
5082-5557-0A000中文资料
Features• Low Power Consumption • Industry Standard Size• Industry Standard Pinout • Choice of Character Size7.6 mm (0.30 in), 10 mm (0.40 in), 10.9 mm (0.43 in), 14.2 mm (0.56 in), 20 mm (0.80 in)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Yellow, Green• Excellent Appearance Evenly Lighted Segments±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Dual DigitLeft and Right Hand Decimal Points±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display• Excellent for Long Digit String Multiplexing DescriptionThese low current seven segment displays are designed for applica-tions requiring low power consumption. They are tested and selected for their excellent low current characteristics to ensure that the segments are matched at low currents. Drive currents as low as 1 mA per segment are available.Pin for pin equivalent displays are also available in a standard current or high light ambient design. The standard current displays are available in all colors and are ideal for most applica-tions. The high light ambient displays are ideal for sunlight ambients or long string lengths. For additional information see the 7.6 mm Micro Bright Seven Segment Displays, 10 mm Seven Segment Displays, 7.6 mm/10.9 mm Seven Segment Displays, 14.2 mm Seven Segment Displays, 20 mm Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Low Current Seven SegmentDisplays Technical Data HDSP-335x SeriesHDSP-555x SeriesHDSP-751x SeriesHDSP-A10x Series HDSP-A80x Series HDSP-A90x Series HDSP-E10x Series HDSP-F10x Series HDSP-G10x Series HDSP-H10x Series HDSP-K12x, K70x Series HDSP-N10x SeriesHDSP-N40x SeriesDevicesAlGaAs HER Yellow Green Package HDSP-HDSP-HDSP-HDSP-Description Drawing A1017511A801A9017.6 mm Common Anode Right Hand Decimal A A1037513A803A9037.6 mm Common Cathode Right Hand Decimal B A1077517A807A9077.6 mm Common Anode ±1. Overflow C A1087518A808A9087.6 mm Common Cathode ±1. Overflow D F10110 mm Common Anode Right Hand Decimal E F10310 mm Common Cathode Right Hand Decimal F F10710 mm Common Anode ±1. Overflow G F10810 mm Common Cathode ±1. Overflow H G10110 mm Two Digit Common Anode Right Hand Decimal X G10310 mm Two Digit Common Cathode Right Hand Decimal Y E100335010.9 mm Common Anode Left Hand Decimal I E101335110.9 mm Common Anode Right Hand Decimal J E103335310.9 mm Common Cathode Right Hand Decimal K E106335610.9 mm Universal ±1. Overflow[1]L H101555114.2 mm Common Anode Right Hand Decimal M H103555314.2 mm Common Cathode Right Hand Decimal N H107555714.2 mm Common Anode ±1. Overflow O H108555814.2 mm Common Cathode ±1. Overflow P K121K70114.2 mm Two Digit Common Anode Right Hand Decimal R K123K70314.2 mm Two Digit Common Cathode Right Hand Decimal S N10020 mm Common Anode Left Hand Decimal Q N101N40120 mm Common Anode Right Hand Decimal T N103N40320 mm Common Cathode Right Hand Decimal U N10520 mm Common Cathode Left Hand Decimal V N106N40620 mm Universal ±1. Overflow[1]W Note:1. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagrams L or W.Part Numbering System5082-x xx x-x x x xxHDSP-x xx x-x x x xxMechanical Options[1]00: No mechanical optionColor Bin Options[1,2]0: No color bin limitationMaximum Intensity Bin[1,2]0: No maximum intensity bin limitationMinimum Intensity Bin[1,2]0: No minimum intensity bin limitationDevice Configuration/Color[1]G: GreenDevice Specific Configuration[1]Refer to respective datasheetPackage[1]Refer to Respective datasheetNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative fordetails.2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (excep-tions may apply). Please refer to respective datasheet for specific bin limit information.Package DimensionsPackage Dimensions (cont.)Package Dimensions (cont.)*The Side View of package indicates Country of Origin.Package Dimensions (cont.)Package Dimensions (cont.)Package Dimensions (cont.)Internal Circuit DiagramInternal Circuit Diagram (cont.)Absolute Maximum RatingsAlGaAs Red - HDSP-HERA10X/E10X/H10X HDSP-751X/Yellow GreenK12X/N10X/N40X335X/555X/HDSP-A80X HDSP-A90X Description F10X, G10X Series K70X Series Series Series Units Average Power per Segment or DP375264mW Peak Forward Current per 45mA Segment or DPDC Forward Current per15[1]15[2]mA Segment or DPOperating Temperature Range-20 to +100-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per Segment 3.0V or DPWave Soldering Temperature for 3Seconds (1.60 mm [0.063 in.] below 250°C seating body)Notes:1. Derate above 91°C at 0.53 mA/°C.2. Derate HER/Yellow above 80°C at 0.38 mA/°C and Green above 71°C at 0.31 mA/°C.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions315600I F = 1 mA A10x3600I F = 5 mA330650I F = 1 mAF10x, G10x3900I F = 5 mA390650I F = 1 mA E10x Luminous Intensity/Segment[1,2]I Vµcd(Digit Average)3900I F = 5 mA400700I F = 1 mAH10x, K12x4200I F = 5 mA270590I F = 1 mAN10x, N40x3500I F = 5 mA1.6I F = 1 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA1.82.2I F = 20 mA PkAll Devices Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2 mV mV/°CV F/Segment or DPA10x255F10x, G10x320E10x340Thermal Resistance LED RθJ-PIN°C/W/SegH10x, K12x Junction-to-Pin400N10x, N40x430High Efficiency RedDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions160270I F = 2 mA 751x1050I F = 5 mA200300I F = 2 mA Luminous Intensity/Segment[1,2]I V mcd(Digit Average)1200I F = 5 mA335x, 555x,K70x270370I F = 2 mA1480I F = 5 mA1.6I F = 2 mAForward Voltage/Segment or DP V F 1.7V I F = 5 mA2.1 2.5I F = 20 mA Pk All Devices Peak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DP751x200335x Thermal Resistance LED RθJ-PIN280°C/WJunction-to-Pin555x, K70x345YellowDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250420I F = 4 mA(Digit Average)I V mcd1300I F = 10 mA1.7I F = 4 mAForward Voltage/Segment or DP V F 1.8V I F = 5 mA A80x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK583nmDominant Wavelength[3,5]λd581.5585592.5nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinGreenDeviceSeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2]250475I F = 4 mA(Digit Average)I V mcd1500I F = 10 mA1.9I F = 4 mAForward Voltage/Segment or DP V F 2.0V I F = 10 mA A90x2.1 2.5I F = 20 mA PkPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN200°C/WJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is the single wavelength which defines the color of thedevice.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. The yellow (HDSP-A800) and Green (HDSP-A900) displays are categorized for dominant wavelength. The category is designated by anumber adjacent to the luminous intensity category letter.AlGaAs RedIntensity Bin Limits (mcd)AlGaAs RedHDSP-A10xIV Bin Category Min.Max.E0.3150.520F0.4280.759G0.621 1.16H0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55HDSP-E10x/F10x/G10xIV Bin Category Min.Max.D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-H10x/K12xIV Bin Category Min.Max.C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50HDSP-N10xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued HERHDSP-751xIV Bin Category Min.Max.B0.1600.240C0.2000.300D0.2500.385E0.3150.520F0.4280.759G0.621 1.16HDSP-751xIV Bin Category Min.Max.B0.2400.366C0.3000.477D0.3910.650E0.5320.923F0.755 1.39G 1.13 2.08H 1.70 3.14HDSP-555x/K70xIV Bin Category Min.Max.A0.2700.400B0.3250.500C0.4150.690D0.5650.990E0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50Intensity Bin Limits (mcd), continued YellowHDSP-A80xIV Bin Category Min.Max.D0.2500.385E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60GreenHDSP-A90xIV Bin Category Min.Max.E0.3150.520F0.4250.760G0.625 1.14H0.940 1.70I 1.40 2.56J 2.10 3.84K 3.14 5.76L 4.718.64M7.0713.00N10.6019.40O15.9029.20P23.9043.80Q35.8065.60Electrical/OpticalFor more information on electrical/optical characteristics, please see Application Note 1005.Contrast Enhancement For information on contrast enhancement, please see Application Note 1015.Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chorinated hydrocarbon family (methylene chloride, trichloro-ethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts.For information on soldering LEDs, please refer to Application Note 1027.Note:All categories are established for classification of products. Productsmay not be available in all categories. Please contact your localAgilent representatives for further clarification/information.Color Categories/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788 6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6271 2451India, Australia, New Zealand: (+65) 6271 2394Japan: (+81 3) 3335-8152(Domestic/International), or0120-61-1280(Domestic Only)Korea: (+65) 6271 2194Malaysia, Singapore: (+65) 6271 2054Taiwan: (+65) 6271 2654Data subject to change.Copyright © 2005 Agilent Technologies, Inc.Obsoletes 5988-8412ENJanuary 19, 20055989-0080EN。
5082-511E-LL000中文资料
DescriptionThis 14.22 mm (0.56 inch) LED seven-segment display uses industry standard size package and pinout.The device is available in eithercommon anode or common cathode.Agilent HDSP-511x/513x14.22 mm (0.56 inch) General Purpose Seven-Segment DisplayData SheetFeatures•Industry standard size •Industry standard pinout 14.22 mm (0.56 inch)DIP lead on 2.54 mm •Choice of colorsHigh Efficiency Red (HER), Green,AlGaAs Red, and Yellow •Excellent appearanceEvenly lighted segments gray package gives optimum contrast ± 50° viewing angle •Design flexibilityCommon anode or common cathode Single digitLeft and right hand decimal point•Categorized for luminous intensityGreen and yellow categorized for color Applications•Suitable for indoor use•Not recommended for industrial application, i.e., operating tem-perature requirements exceeding +85˚C or below –25˚C [1]•Extreme temperature cycling not recommendedNotes:1.For additional details, please contact your local Agilent sales office or an authorized distributor.Devices HERGreenAlGaAs Red Yellow DescriptionHDSP-511E HDSP-511G HDSP-511A HDSP-511Y Common Anode, Right Hand Decimal HDSP-513EHDSP-513GHDSP-513AHDSP-513YCommon Cathode, Right Hand DecimalThe choice of colors includes High Efficiency Red (HER),Green, AlGaAs Red, and Yellow.The gray face displays aresuitable for indoor use.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]A: AlGaAs RedE: High Efficiency Red G: Green Y: YellowDevice Specific Configuration [1]Refer to Respective Datasheet Package [1]Refer to Respective DatasheetInternal Circuit DiagramPackage Dimensions0.50 ± 0.05 TYP. 10 PLACESTOP END VIEWFRONT VIEW SIDE VIEWALL DIMENSIONS ARE IN MILLIMETERS (INCHES).COMMON CATHODECOMMON ANODE COMMON ANODECOMMON CATHODEPINFUNCTIONPIN 1CATHODE e 2CATHODE d3COMMON ANODE 4CATHODE c 5CATHODE DP 6CATHODE b 7CATHODE a8COMMON ANODE 9CATHODE f 10CATHODE g12345678910FUNCTIONANODE e ANODE dCOMMON CATHODE ANODE c ANODE DPANODE b ANODE aCOMMON CATHODE ANODE f ANODE gHDSP-511E/511G/511Y/511AHDSP-513E/513G/513Y/513AGreen Device HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 2.001 4.100mcd I F = 10 mA Forward Voltage V F 2.06V I F = 10 mA 1.802.25 2.60V I F = 20 mAPeak Wavelength λPEAK 568nm Dominant Wavelength λd 573nm Reverse VoltageVR5VI R = 100 µA511G 513GAbsolute Maximum Ratings at T A = 25˚C HERGreenAlGaAs Red Yellow DescriptionHDSP-51xE HDSP-51xG HDSP-51xA HDSP-51xY Units Power Dissipation Segment 60653052mW Forward Current Segment25[1]25[2]15[3]20[4]mA Peak Forward Current per Segment 1001008080mA (1/10 Duty Factor at 10 KHz)Operating Temperature Range –35 to +85–35 to +85–35 to +85–35 to +85˚C Storage Temperature Range–35 to +85–35 to +85–35 to +85–35 to +85˚C Reverse Voltage per Segment or DP5555V Wavesoldering Temperature for 3 seconds 250250250250˚C(at 2 mm Distance from the body)Notes:1.Derate above 25˚C at 0.33 mA/˚C.2.Derate above 25˚C at 0.33 mA/˚C.3.Derate above 25˚C at 0.2 mA/˚C.4.Derate above 25˚C at 0.27 mA/˚C.Electrical/Optical Characteristics at T A = 25˚C High Efficiency Red (HER)Device HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 1.73mcd I F = 5 mA 2.0014.100mcd I F = 10 mA Forward Voltage V F 2.05 2.40V I F = 20 mAPeak Wavelength λPEAK 635nm Dominant Wavelength λd 620nm Reverse VoltageVR5VI R = 100 µA511E 513EColor Bin Limits (nm at 10 mA)Dominant Wavelength (nm)Color Bin Min.Max.Note:1.Tolerance for each bin limit is 1 nm.Yellow Device HDSP-ParameterSymbolMin.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 1.03mcd I F = 5 mA 1.2512.600mcd I F = 10 mA Forward Voltage V F 2.15 2.60V I F = 20 mAPeak Wavelength λPEAK 595nm Dominant Wavelength λd 590nm Reverse VoltageVR5VI R = 100 µA511Y 513YAlGaAs Red Device HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 4.93mcd I F = 5 mA 3.2016.500mcd I F = 10 mA Forward Voltage V F 1.85 2.00V I F = 20 mAPeak Wavelength λPEAK 660nm Dominant Wavelength λd 643nm Reverse VoltageVR5VI R = 100 µA511A 513AIntensity Bin Limits (mcd at 10 mA)Bin HER/Green Yellow AlGaAs Red Name Min.[1]Max.[1]Min.[1]Max.[1]Min.[1]Max.[1]H NA NA 1.251 2.000NA NA I 2.001 3.200 2.001 3.200NA NA J 3.201 5.050 3.201 5.050 3.201 5.050K 5.0518.000NA NA 5.0518.000LNANANANA8.00112.650Note:1.Tolerance for each bin limit is ± 10%.Figure 1. Maximum allowable average or DC current vs. ambient temperature.Figure 2. Forward current vs. forward voltage.Figure 3. Relative luminous intensity vs. DC forward current.High Efficiency Red (HER)Figure 4. Relative efficiency (luminousintensity per unit current) vs. peak current.30T A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m AR E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA 0.20.40.60.81.01.2R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 7. Relative luminous intensity vs. DC forward current.Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 5. Maximum allowable average or DC current vs. ambient temperature.Figure 6. Forward current vs. forward voltage.Green302520151050020*********T A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.52.52.01.51.00.50051015202530I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )353.0R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 9. Maximum allowable average or DC current vs. ambient temperature.Figure 10. Forward current vs. forward voltage.Figure 11. Relative luminous intensity vs. DC forward current.Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current.AlGaAs RedT A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.5051015202530I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 13. Maximum allowable average or DC current vs. ambient temperature.Figure 14. Forward current vs. forward voltage.Figure 15. Relative luminous intensity vs. DC forward current.Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current.Yellow252015105T A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m A3.52.52.01.51.00.50051015202530I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )353.0R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT– mA0.20.40.60.81.01.2V F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A/semiconduc-torsFor product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only) Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Obsoletes 5980-2919ENJune 30, 20045988-2968EN。
5082-A411-AM000资料
DevicesAlGaAs Orange Red HER Green Package HDSP-HDSP-HDSP-HDSP- DescriptionDrawingA411A111A211A5117.6 mm Common Anode Right Hand Decimal A A413A113A213A5137.6 mm Common Cathode Right Hand Decimal B F411F111F211F51110 mm Common Anode Right Hand Decimal C F413F113F213F51310 mm Common Cathode Right Hand Decimal D G411G111G211G51110 mm Two Digit Common Anode Right Hand Decimal E G413G113G213G51310 mm Two Digit Common Cathode Right Hand Decimal F H411H111H211H51114.2 mm Common Anode Right Hand Decimal G H413H113H213H51314.2 mm Common Cathode Right Hand Decimal H K411K111K211K51114.2 mm Two Digit Common Anode Right Hand Decimal I K413K113K213K51314.2 mm Two Digit Common Cathode Right Hand DecimalJBlack Surface Seven Segment Displays Technical DataFeatures• Black Surface and Color Tinted Epoxy• Industry Standard Size • Industry Standard Pinout • Choice of Character Size 7.6 mm (0.30 in.), 10 mm (0.40in.), 14.2 mm (0.56 in.)• Choice of ColorsAlGaAs Red, High Efficiency Red (HER), Green, Orange • Excellent Appearance Evenly Lighted Segments ±50° Viewing Angle• Design FlexibilityCommon Anode or Common CathodeSingle and Two Digit• Categorized for Luminous IntensityCategorized for Color: Green Use of Like Categories Yields a Uniform Display• Excellent for Long Digit String MultiplexingDescriptionThese devices use industrystandard size package and pinout.Available with black surfaceHDSP-AX11/-AX13 Series HDSP-FX11/-FX13 Series HDSP-GX11/-GX13 Series HDSP-HX11/-HX13 Series HDSP-KX11/-KX13 Seriesfinish. All devices are available as either common anode or common cathode.Typical applications includeappliances, channel indicators of TV, CATV converters, game machines, and point of sale terminals.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin LimitationMaximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]A: 7.6 mm (0.3 inch) Single Digit Seven Segment DisplayF: 10 mm (0.4 inch) Single Digit Seven Segment DisplayG: 10 mm (0.4 inch) Dual Digit Seven Segment DisplayH: 14.2 mm (0.56 inch) Single Digit Seven Segment DisplayK: 14.2 mm (0.56 inch) Dual Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.Package Dimensions (7.6 mm Series)Internal Circuit DiagramPackage Dimensions (10 mm Series: Single)Internal Circuit DiagramPackage Dimensions (10 mm Series: Two Digit)Internal Circuit DiagramPackage Dimensions (14.2 mm Series: Single)Internal Circuit DiagramPackage Dimensions (14.2 mm Series: Two Digit)Internal Circuit Diagram2DIGIT NO. 1 CATHODE1Absolute Maximum RatingsAlGaAs Red HER/Orange GreenHDSP-X11X HDSP-X21X/X41X HDSP-X51X Description Series Series Series Units Average Power per Segment37105105mW or DPPeak Forward Current per4590[1]90[3]mA Segment or DPDC Forward Current per15[5]30[2]30[4]mA Segment or DPOperating Temperature Range–20 to +100 –40 to +100°C Storage Temperature Range–55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for250°C 3 Seconds (1.60 mm [0.063 in.]below Body)Notes:1. See Figure 5 to establish pulsed conditions.2. Derate above 53°C at 0.45 mA/°C (see Figure 7).3. See Figure 6 to establish pulsed conditions.4. Derate above 39°C at 0.37 mA/°C (see Figure 7).5. Derate above 91°C at 0.53 mA/°C (see Figure 1).Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDevice SeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions A11X Luminous Intensity/Segment[1,2]I V315600µcd I F = 1 mA (Digit Average)3600I F = 5 mAF11X, G11X330650I F = 1 mA3900I F = 5 mAH11X, K11X400700I F = 1 mA4200I F = 5 mAAll Devices Forward Voltage/Segment or DP V F 1.6 2.0V I F = 1 mA1.7I F = 5 mA1.822I F = 20 mA PeakPeak WavelengthλP EAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPA11X Thermal Resistance LED RθJ-PIN255°C/W/Junction-to-Pin Seg.F11X, G11X320H11X, K12X400OrangeDevice SeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions A41X Luminous Intensity/Segment I V0.70mcd I F = 5 mA (Segment Average)[1,2]F41X, G41X 1.0I F = 5 mAH41X, K41X 2.37I F = 10 mAAll Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA DevicesPeak WavelengthλPEAK600nmDominant Wavelength[3]λd603nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C–2mV/°CV F/Segment or DPA41X Thermal Resistance LED RθJ-PIN200°C/W/Junction-to-Pin Seg.F41X, G41X320H41X, K41X345High Efficiency RedDevice SeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test Conditions A21X Luminous Intensity/Segment[1,2]I V360980µcd I F = 5 mA (Digit Average)5390I F = 20 mAF21X, G21X4201200I F = 5 mAH21X, K21X9002800I F = 10 mA3700I F = 60 mA Peak:1/6 Duty Factor All Forward Voltage/Segment or DP V F 2.0 2.5V I F = 20 mA DevicesPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nmReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPA21X Thermal Resistance LED RθJ-PIN200°C/W/Junction-to-Pin Seg.F21X, G21X320H21X, K21X345High Performance GreenDevice SeriesHDSP-Parameter Symbol Min.Typ.Max.Units Test ConditionsA51X Luminous Intensity/Segment[1,2]I V8603000µcd I F = 10 mA (Digit Average)6800I F = 20 mAF51X, G51X10303500I F = 10 mAH51X, K51X9002500I F = 10 mA3100I F = 60 mA Peak:1/6 Duty FactorAll Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mADevicesPeak WavelengthλPEAK566nmDominant Wavelength[3,5]λd571577nmReverse Voltage/Segment or DP[4]V R 3.050V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPA51X Thermal Resistance LED RθJ-PIN200°C/W/Junction-to-Pin Seg.F51X, G51X320H51X, G51X345Notes:1. Case temperature of device immediately prior to the intensity measurement is 25°C.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color ofthe device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. Green (HDSP-A51X/F51X/G51X/H512X/K51X) series displays are categorized for dominant wavelength. The category is designated bya number adjacent to the luminous intensity category letter.Figure 3. Relative Luminous Intensity vs. DC Forward Current.Figure 4. Relative Efficiency (LuminousIntensity per Unit Current) vs. Peak Current.Figure 1. Maximum Allowable Average orDC Current vs. Ambient Temperature.Figure 2. Forward Current vs. Forward Voltage.16024681012142010090807060504030T – AMBIENT TEMPERATURE – °C AI A V E . M A X – M A X I M U M A V E R A G E F O R W A R D C U R R E N T P E R S E G M E N T – m AF 1201102018F 50.020.010.05.02.01.00.50.10.51.01.52.02.5V – FORWARD VOLTAGE – VF I – F O R W A R D C U R R E N TP E R S E G M E N T – m A20105210.50.20.10.10.20.51251020R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 1 m A )I – FORWARD CURRENT PER SEGMENT – mAF I – PEAK FORWARD CURRENTPER SEGMENT – mAPEAK η –R E L A T I V E E F F I C I E N C Y – N O R M A L I Z E D T O 1 A T 1 m AP E A K 1.31.21.11.00.90.80.7AlGaAs RedHER, Green, OrangeFigure 7. Maximum Allowable DCCurrent vs. Ambient Temperature.Figure 8. Forward Current vs.Forward Voltage Characteristics.Figure 9. Relative Luminous Intensity vs. DC Forward Current.Figure 10. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.40051015202530352010090807060504030T – AMBIENT TEMPERATURE – °CA I M A X – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AD C 1201105045010080604020I – F O R W A R D C U R R E N T P E R S E G M E N T – m AF 2.04.03.01.0V –FORWARD VOLTAGE – VF 05.0ηP E A K – R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R ,A N D T O 1 A T 10 m A F O R G R E E N )150108642205301025I – FORWARD CURRENT PER SEGMENT – mAF 0I – PEAK FORWARD CURRENTPER SEGMENT – mAPEAK ηP E A K – R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 5 m A F O R H E R ,A N D 10 m A F O R G R E E N )Figure 5. Maximum Tolerable Peak Currentvs. Pulse Duration – HER, Orange.Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration – Green.R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K F I M A X D C t – PULSE DURATION – µsP 101100DC R A T I O O F M A X I M U M O P E R A T I N G P E A K C U R R E N T T O T E M P E R A T U R E D E R A T E D D C C U R R E N TI P E A K FI M A X D C t – PULSE DURATION – µs P 101100DCHDSP-A1xx IV Bin Category Min.Max.E 0.3150.520F 0.4280.759G 0.621 1.16H 0.945 1.71I 1.40 2.56J 2.10 3.84K 3.14 5.75L 4.708.55Intensity Bin Limits (mcd)AlGaAs RedHDSP-F1xx/G1xx IV Bin Category Min.Max.D 0.3910.650E 0.5320.923F 0.755 1.39G 1.13 2.08H 1.703.14HDSP-H1xx/K1xx IV Bin Category Min.Max.C 0.4150.690D 0.5650.990E 0.810 1.50F 1.20 2.20G 1.80 3.30H 2.73 5.00I 4.097.50OrangeHDSP-A41XIV Bin Category MinMaxA 0.2840.433B 0.3540.541C 0.4430.677D 0.5540.846E 0.692 1.057F 0.856 1.322G 1.082 1.652H 1.352 2.066I 1.692 2.581J 2.114 3.227K 2.641 4.034L 3.300 5.042M 4.127 6.303N 5.1577.878HDSP-F41X/G41XIV Bin Category MinMaxC 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751HDSP-H41X/K41XIV Bin Category MinMaxB 0.77 1.17C 0.95 1.45D 1.19 1.82E 1.49 2.27F 1.85 2.89G 2.32 3.54H 2.904.43Intensity Bin Limits (mcd), continued HERMin.Max.B0.3420.630C0.5160.946D0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.177Min.Max.C0.4850.890D0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.682 6.751Min.Max.E0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.628.64J 6.9312.70K10.3919.04Contrast EnhancementFor information on contrast enhancement, please see Application Note 1015.Soldering/CleaningFor information on soldering LEDs, please refer to Application Note 1029.Electrical/OpticalFor more information onelectrical/optical characteristics,please see Application Note 1005.Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.HDSP-A5xx IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Intensity Bin Limits (mcd), continued GreenHDSP-F5xx/G5xx IV Bin Category Min.Max.H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26HDSP-H5xx/K5xx IV Bin Category Min.Max.E 0.91 1.67F 1.37 2.51G 2.05 3.76H 3.08 5.64I 4.618.46/semiconductors For product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc. Obsoletes 5988-1742ENJuly 17, 20045988-4433EN。
5082-7651数字管数据表说明书
Features•Industry standard size•Industry standard pinout7.62 mm (0.300 inch) DIP leads on 2.54 mm (0.100 inch)centers •Choice of colorsAlGaAs Red, High Efficiency Red, Yellow, Green•Excellent appearanceEvenly lighted segments±50° viewing angleOptimum contrast given by gray top surface for AlGaAs Red and Green devicesRed top surface for HER devices Yellow top surface for yellow devicesAlGaAs [1]HER [1]Yellow Green Package Red HDSP-5082-5082-HDSP-DescriptionDrawing7610762036007.6 mm Common Anode Left Hand Decimal A 7611762136017.6 mm Common Anode Right Hand Decimal B 7613762336037.6 mm Common Cathode Right Hand Decimal C 7616762636067.6 mm Universal ±1. Overflow Right Hand Decimal [2]D E15076507660460010.9 mm Common Anode Left Hand Decimal E E15176517661460110.9 mm Common Anode Right Hand Decimal F E15376537663460310.9 mm Common Cathode Right Hand Decimal G E15676567666460610.9 mm Universal ±1. Overflow Right Hand Decimal [2]HNotes:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation.2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.Devices5082-761x Series/-762x Series/-765x Series/-766x Series HDSP-360x Series/-460x Series/-E15x SeriesDescriptionThe 7.6 mm (0.3 inch) and 10.9 mm (0.43 inch) LED seven segment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16feet). These devices use an industry standard size package and pinouts. All devices are available as either common anode or common cathode.5082-761x Series7.6 mm (0.3 inch)/10.9 mm (0.43 inch)Seven Segment DisplaysData SheetFeatures, continued •Design flexibilityCommon anode or common cathode Single digitsLeft or right hand decimal point ±1. overflow character •Categorized for luminous intensity Yellow and Green categorized for colorUse of like categories yields a uniform display •High light output •High peak current •Excellent for long digit string multiplexing•Intensity and color selection available See Intensity and Color Selected Displays Data Sheet •Sunlight viewable AlGaAsPart Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation4: Color Bin 4 Only (applicable for Green devices only)B: Color Bins 2 and 3 (applicable for Yellow devices only)Maximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]0: Common Anode1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAvago representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.NOTES;1. DIMENSIONS IN MILLIMETRES AND (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. UNUSED DP POSITION.5. SEE INTERNALCIRCUIT DIAGRAM.6. REDUNDANT CATHODE.7. SEE PART NUMBER TABLE FOR L.H.D.P.AND R.H.D.P.DESIGNATION.8. FOR YELLOW AND GREEN DEVICES ONLY.Package DimensionsThese displays are ideal for most applications. Pin for pin equiva-lent displays are also available in a low current or high lightambient design. The low current displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa-tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.Internal Circuit DiagramAbsolute Maximum RatingsAlGaAs Red HER Yellow GreenHDSP-E1505082-7610/5082-7620/HDSP-3600/ Description Series7650 Series7660 Series4600 Series Units Average Power per Segment or DP9610580105mW Peak Forward Current per160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per40[2]30[4]20[6]30[8]mA Segment or DPOperating Temperature Range-20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for3 Seconds (1.59 mm [0.063 in.] 250°Cbelow Body)Notes:1.See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Avago components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V8.515.0mcd I F = 20 mA(Digit Average)1.8V I F = 20 mAForward Voltage/Segment or DP V F2.03.0V I F = 100 mAHDSP-E15x Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN340°C/W/Segto-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions 5082-761x Luminous Intensity/Segment[1,2,6]340800µcd I F = 5 mA (Digit Average)I V5082-765x3401115µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nm AllReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN280°C/WJunction-to-PinDevice Series ParameterSymbol Min.Typ.Max.Units Test Conditions 5082-762x Luminous Intensity/Segment [1,2]205620µcdI F = 5 mA(Digit Average)I V5082-766x290835µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mAPeak WavelengthλPEAK 583nm Dominant Wavelength [3,7]λd 581.5586592.5nm AllReverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ-PIN280°C/W/SegJunction-to-PinNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series.6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series.7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.High Performance GreenDevice Test Series ParameterSymbol Min.Typ.Max.Units Conditions HDSP-360x Luminous Intensity/Segment [1,2]8602700µcdI F = 10 mA(Digit Average)I VHDSP-460x10304000µcd I F = 10 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mAPeak WavelengthλPEAK 566nm Dominant Wavelength [3,7]λd 571577nm AllReverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ -PIN280°C/W/SegJunction-to-PinFigure 3. Forward Current vs. Forward Voltage.Figure 2. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.Figure 1. Maximum Allowed Peak Current vs. Pulse Duration – AlGaAs Red.I D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T– m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20m A )0I F – FORWARD CURRENT PER SEGMENT – mA2.001.501.250.750.2520401.751.000.5010305152535ηP E A K – N O R M A L I Z E D R E L A T I VE EF F I C I E N C YI PEAK – PEAK FORWARD CURRENTPER SEGMENT – mAHER, Yellow, GreenFigure 6. Maximum Tolerable Peak Current vs.Pulse Duration – HER Series.Figure 7. Maximum Tolerable Peak Current vs.Pulse Duration – Yellow Series.Figure 8. Allowable Peak Current vs.Pulse Duration – Green Series.Figure 9. Maximum Allowable DC Current vs.Ambient Temperature.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 10. Forward Current vs.Forward Voltage.Figure 12. Relative LuminousEfficiency (Luminous Intensity per Unit Current) vs. Peak Current.HDSP-E15x IV Bin Category Min.Max.L 8.6715.90M 13.0023.80N 19.5035.80O 29.3053.60P 43.9080.50Intensity Bin Limits (mcd)AlGaAs RedHER5082-761xIV Bin Category Min.Max.B 0.3690.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.177 5082-765xIV Bin Category Min.Max.B 0.3470.593C 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751Yellow5082-762x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.413 4.4255082-766xIV Bin Category Min.Max.C 0.2970.543D 0.4450.817E 0.669 1.225F 1.003 1.838G 1.504 2.758H 2.256 4.137HDSP-460xIV Bin Category Min.Max.G 1.03 1.88H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26GreenHDSP-360x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Color CategoriesNote:All categories are established for classification of products. Productsmay not be available in all categories. Please contact your Avagorepresentatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningFor information on solderingLEDs, please refer to ApplicationNote 1027.For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5963-7394E5988-3325EN May 31, 2006。
5082-2810中文资料
Schottky Barrier Diodes for General Purpose ApplicationsTechnical DataFeatures• Low Turn-On VoltageAs Low as 0.34 V at 1 mA• Pico Second Switching Speed • High Breakdown VoltageUp to 70 V• Matched Characteristics AvailableDescription/Applications The 1N5711, 1N5712, 5082-2800/ 10/11 are passivated Schottky barrier diodes which use a patented “guard ring” design to achieve a high breakdown voltage. Packaged in a low cost glass package, they are well suited for high level detecting, mixing, switching, gating, log or A-D converting, video detecting, frequency discriminating, sampling, and wave shaping.The 5082-2835 is a passivatedSchottky diode in a low cost glasspackage. It is optimized for lowturn-on voltage. The 5082-2835 isparticularly well suited for theUHF mixing needs of the CATVmarketplace.The 5082-2300 Series and5082-2900 devices are unpas-sivated Schottky diodes in a glasspackage. These diodes haveextremely low 1/f noise and areideal for low noise mixing, andhigh sensitivity detecting. Theyare particularly well suited for usein Doppler or narrow band videoreceivers.1N57111N57125082-2300 Series5082-2800 Series5082-2900DIMENSIONS IN MILLIMETERS AND (INCHES).Outline 15Maximum RatingsJunction Operating and Storage Temperature Range5082-2303, -2900.................................................................-60°C to +100°C 1N5711, 1N5712, 5082-2800/10/11....................................-65°C to +200°C 5082-2835............................................................................-60°C to +150°C DC Power Dissipation(Measured in an infinite heat sink at T CASE = 25°C)Derate linearly to zero at maximum rated temperature5082-2303, -2900..............................................................................100 mW 1N5711, 1N5712, 5082-2800/10/11.................................................250 mW 5082-2835.........................................................................................150 mW Peak Inverse Voltage.................................................................................V BRPackage CharacteristicsOutline 15Lead Material........................................................................................DumetLead Finish..............................................................................95-5% Tin-LeadMax. Soldering Temperature................................................260°C for 5 secMin. Lead Strength....................................................................4 pounds pullTypical Package Inductance1N5711, 1N5712:................................................................................2.0 nH2800 Series:........................................................................................2.0 nH2300 Series, 2900:..............................................................................3.0 nHTypical Package Capacitance1N5711, 1N5712:................................................................................0.2 pF2800 Series:........................................................................................0.2 pF2300 Series, 2900:............................................................................0.07 pFThe leads on the Outline 15 package should be restricted so that thebend starts at least 1/16 inch from the glass body.Outline 15 diodes are available on tape and reel. The tape and reelspecification is patterned after RS-296-D.Electrical Specifications at T= 25°CAGeneral Purpose DiodesMin.Max.V F = 1 V Max.Max.Max.Breakdown Forward at Forward Reverse Leakage Capaci-Part Package Voltage Voltage Current Current tance Number Outline V BR (V)V F (mV)I F (mA)I R (nA) at V R (V)C T (pF) 5082-280015704101520050 2.0 1N571115704101520050 2.0 5082-281015204103510015 1.2 1N571215205503515016 1.2 5082-28111515410201008 1.2 5082-2835158*34010*1001 1.0 Test I R = 10 µA I F = 1 mA*V F = 0.45 V V R = 0 V Conditions*I R = 100 µA f =1.0 MHz Note: Effective Carrier Lifetime (τ) for all these diodes is 100 ps maximum measured with Krakauer method at 5 mA except for 5082-2835 which is measured at 20 mA.Low 1/f (Flicker) Noise DiodesMin.Max.V F = 1 V Max.Max.Max.Part Breakdown Forward at Forward Reverse Leakage Capaci-Number Package Voltage Voltage Current Current tance 5082-Outline V BR (V)V F (mV)I F (mA)I R (nA) at V R (V)C T (pF) 230315204003550015 1.0 29001510400201005 1.2 Test I R = 10 µA I F = 1 mA V R = 0 V Conditions f =1.0 MHzNote: Effective Carrier Lifetime (τ) for all these diodes is 100 ps maximum measured with Krakauer method at 20 mA.Matched Pairs and QuadsBasic Matched MatchedPart Number Pair Quad Batch5082-Unconnected Unconnected Matched[1]Test Conditions2900∆VF at IF= 1.0, 10 mA28005082-28045082-2805∆V F at I F = 0.5, 5 mA ∆V F = 20 mV∆V F = 20 mV*I F = 10 mA∆C O at f = 1.0 MHz28115082-2826∆VF at IF= 10 mA∆V F = 10 mV∆C O at f = 1.0 MHz ∆C O = 0.1 pF28355082-2080∆VF at IF=10 mA∆V F = 10 mV∆C O at f = 1.0 MHz∆C O = 0.1 pFNote:1. Batch matched devices have a minimum batch size of 50 devices.SPICE ParametersParameter Units5082-28005082-28105082-28115082-28355082-23035082-2900B V V75251892510C J0pF 1.60.8 1.00.70.7 1.1E G eV0.690.690.690.690.690.69I BV A10E-510E-510E-510E-510E-510E-5I S A 2.2 x 10E-9 1.1 x 10E-90.3 x 10E-8 2.2 x 10E-87 x 1.0E-910E-8N 1.08 1.08 1.08 1.08 1.08 1.08 R SΩ25101051015 P B V0.60.60.60.560.640.64 PT222222 M0.50.50.50.50.50.5Typical ParametersV F – FORWARD VOLTAGE (V)Figure 1. I-V Curve Showing Typical Temperature Variation for 5082-2300 Series and 5082-2900 Schottky Diodes.1001010.10.01I F - F O R W A R D C U R R E N T (m A )V BR (V)Figure 2. 5082-2300 Series Typical Reverse Current vs. Reverse Voltage at Various Temperatures.10.0001,000100101I R (n A )051015100755025T A = 25°CI F - FORWARD CURRENT (mA)Figure 3. 5082-2300 Series and 5082-2900 Typical Dynamic Resistance (R D ) vs. Forward Current (I F ).100010010R D - D Y N A M I C R E S I S T AN C E (Ω)0.01010100V R - REVERSE VOLTAGE (V)Figure 4. 5082-2300 and 5082-2900 Typical Capacitance vs. Reverse Voltage.1.21.00.80.60.40.20C T - C A P A C I T A N C E (p F )048121620V F - FORWARD VOLTAGE (V)Figure 5. I-V Curve Showing Typical Temperature Variation for 5082-2800 or 1N5711 Schottky Diodes.5010510.50.10.050.01I F - F O R W A R D C U R R E N T (m A )00.20.40.60.8 1.0 1.2V R - REVERSE VOLTAGE (V)Figure 6. (5082-2800 OR 1N5711) Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.100,00010,0001000100101I R - R E V E R S E C U R R E N T (n A )0.20.40.60.81.01.2V R - REVERSE VOLTAGE (V)Figure 7. (5082-2800 or 1N5711)Typical Capacitance (C T ) vs. Reverse Voltage (V R ).12.01.51.00.50C T - C A P A C I T A N C E (p F )010********V F - FORWARD VOLTAGE (V)Figure 8. I-V Curve Showing Typical Temperature Variation for the 5082-2810 or 1N5712 Schottky Diode.100101.00.10.01I F - F O R W A R D C U R R E N T (m A )V R - REVERSE VOLTAGE (V)Figure 9. (5082-2810 or IN5712)Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.10,0001000100101.0I R - R E V E R S E C U R R E N T (n A )Typical Parameters, continuedV F - FORWARD VOLTAGE (V)Figure 10. I-V Curve Showing Typical Temperature Variation for the 5082-2811 Schottky Diode.100101.00.10.01I F - F O R W A R D C U R R E N T (m A )0.40.20.60.81.01.2V R - REVERSE VOLTAGE (V)Figure 11. (5082-2811) Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.100,00010,0001000100101I R - R E V E R S E C U R R E N T (n A )0510********V F - FORWARD VOLTAGE (V)Figure 12. I-V Curve Showing Typical Temperature Variations for 5082-2835 Schottky Diode.100101.00.10.01I F - F O R W A R D C U R R E N T (m A )00.20.40.60.8 1.0 1.2V R - REVERSE VOLTAGE (V)Figure 13. (5082-2835) Typical Variation of Reverse Current (I R ) vs. Reverse Voltage (V R ) at Various Temperatures.100,00010,0001000100101I R - R E V E R S E C U R R E N T (n A )0123456V R - REVERSE VOLTAGE (V)Figure 14. Typical Capacitance (C T ) vs. Reverse Voltage (V R ).C T - C A P A C I T A N C E (p F )0246810I F - FORWARD CURRENT (mA)Figure 15. Typical Dynamic Resistance (R D ) vs. Forward Current (I F ).1000100101R D - D Y N A M I C R E S I S T A N C E (Ω)Diode Package Marking1N5xxx5082-xxxxwould be marked:1Nx xxxxx xxYWW YWWwhere xxxx are the last four digits of the 1Nxxxx or the 5082-xxxx partnumber. Y is the last digit of the calendar year. WW is the work week ofmanufacture.Examples of diodes manufactured during workweek45 of 1999:1N57125082-3080would be marked:1N53071280945945Data subject to change.Copyright © 1999 Agilent TechnologiesObsoletes 5968-4304E5968-7181E (11/99)。
5082-334E-HK000资料
DescriptionThis 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device isavailable in either common anodeAgilent HDSP-331x/332E/333x/334x Series 7.62 mm (0.3 inch) General Purpose Seven-Segment DisplayData SheetFeatures•Industry standard size•Industry standard pinout7.62 mm (0.4 inch) character height DIP lead on 2.54 mm •Choice of colorsHigh Efficiency Red (HER), Green,AlGaAs Red, and Yellow •Excellent appearanceEvenly lighted segments gray pack-age gives optimum contrast ± 50° viewing angle •Design flexibilityCommon anode or common cathode Single digitLeft and right hand decimal point•Categorized for luminous intensityGreen and yellow categorized for color Applications•Suitable for indoor use•Not recommended for industrial application, i.e., operating temperature requirementsexceeding +85˚C or below –25˚C [1]•Extreme temperature cycling not recommendedNote:1.For additional details, please contact your local Agilent sales office or an authorized distributor.Devices HERGreenAlGaAs Red Yellow DescriptionPackage Drawing HDSP-331E HDSP-331GHDSP-331AHDSP-331YCommon Anode, Right Hand and A Left Hand DecimalHDSP-332E Common Anode, Right Hand and Left A Hand Decimal without Pin 4, 5 and 12HDSP-333E HDSP-333G HDSP-333A HDSP-333Y Common Cathode, Right Hand B DecimalHDSP-334EHDSP-334GHDSP-334AHDSP-334YCommon Cathode, Right Hand DecimalCor common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red,and Yellow. The gray facedisplays are suitable for indoor use.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]A: AlGaAs RedE: High Efficiency Red G: Green Y: YellowDevice Specific Configuration [1]Refer to Respective Datasheet Package [1]Refer to Respective Datasheet∅1.1FRONT VIEWTOP END VIEWA F GB C L.DPD E DIMENSIONS IN MILLIMETERS (INCHES)R.DPNOTE: HDSP-332E DOES NOT HAVE PIN 4, 5 AND 12.Package Drawing APackage Drawing B∅1.1FRONT VIEW TOP END VIEWAF G BCDEDIMENSIONS IN MILLIMETERS (INCHES)R.DPPackage Drawing C∅1.1FRONT VIEW TOP END VIEWAF G BCDEDIMENSIONS IN MILLIMETERS (INCHES)R.DP611310872113.14 COMPIN N0.123678910111314CONNECTION CATHODE A CATHODE F COMMON ANODE CATHODE L.DP CATHODE E CATHODE D CATHODE R.DP CATHODE C CATHODE G CATHODE B COMMON ANODEPINS 4, 5, 12: NO CONNECTION FORHDSP-331E/331G/331Y/331A AND NO PIN FOR HDSP-332EHDSP-331E/331G/331Y/331A/332E9Common AnodeCommon Cathode14138761294.12 COMPIN NO.1246789121314CONNECTION ANODE F ANODE G COMMON CATHODEANODE E ANODE D ANODE C ANODE DP COMMON CATHODEANODE B ANODE AHDSP-333E/333G/333Y/333APINS 3, 5, 10, 11: NCCommon Cathode1098524371.6 COMPIN NO.12345678910CONNECTION COMMON CATHODEANODE E ANODE G ANODE F ANODE D COMMON CATHODEANODE DP ANODE C ANODE B ANODE AHDSP-334E/334G/334Y/334APINS 11, 12, 13, 14: NCElectrical/Optical Characteristics at T A = 25˚C High Efficiency Red (HER)Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 1.15mcd I F = 5 mA 0.81.80mcd I F = 10 mA Forward Voltage V F2.05 2.40V I F = 20 mAPeak Wavelength λPEAK 635nm Dominant Wavelength λd 620nm Reverse VoltageVR5VI R = 100 µAGreen Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 0.8 2.00mcd I F = 10 mA Forward Voltage V F 2.07V I F = 10 mA 1.802.25 2.60V I F = 20 mAPeak Wavelength λPEAK 568nm Dominant Wavelength λd 573nm Reverse VoltageVR5VI R = 100 µAAbsolute Maximum Ratings at T A = 25˚C DescriptionHERGreenAlGaAs Red Yellow HDSP-33xE HDSP-33xG HDSP-33xA HDSP-33xY Units Power Dissipation Segment 65653052mW Forward Current Segment25[1]25[2]15[3]20[4]mA Peak Forward Current per Segment 1001008080mA (1/10 Duty Factor at 10 kHz)Operating Temperature Range –35 to +85–35 to +85–35 to +85–35 to +85˚C Storage Temperature Range–35 to +85–35 to +85–35 to +85–35 to +85˚C Reverse Voltage per Segment or DP5555V Wave Soldering Temperature for 3 Seconds 250250250250˚C(at 2 mm Distance from the Body)Notes:1.Derate above 25˚C at 0.33 mA/˚C.2.Derate above 25˚C at 0.33 mA/˚C.3.Derate above 25˚C at 0.2 mA/˚C.4.Derate above 25˚C at 0.27 mA/˚C.331G 333G 334G331E 332E 333E 334EYellow Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 0.71mcd I F = 5 mA 0.801.50mcd I F = 10 mA Forward Voltage V F2.15 2.60V I F = 20 mAPeak Wavelength λPEAK 595nm Dominant Wavelength λd 590nm Reverse VoltageVR5VI R = 100 µAAlGaAs Red Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 3.93mcd I F = 5 mA 2.0014.20mcd I F = 10 mA Forward Voltage V F 1.85 2.00V I F = 20 mAPeak Wavelength λPEAK 660nm Dominant Wavelength λd 643nm Reverse VoltageVR5VI R= 100 µA331Y 333Y 334Y331A 333A 334AIntensity Bin Limits (mcd at 10 mA)HER/Green/Yellow AlGaAs RedBin Name Min.[1]Max.[1]Min.[1]Max.[1]G 0.801 1.250NA NA H 1.251 2.000NA NA I 2.001 3.200 2.001 3.200J NA NA 3.201 5.050KNA NA5.0518.000Note:1.Tolerance for each bin limit is ± 10%.Color Bin Limits (nm at 10 mA)Dominant Wavelength (nm)Color Bin Min.Max.Note:1.Tolerance for each bin limit is 1 nm.Figure 1. Maximum allowable average or DC current vs. ambient temperature.Figure 2. Forward current vs. forward voltage.Figure 3. Relative luminous intensity vs. DC forward current.High Efficiency Red (HER)Figure 4. Relative efficiency (luminousintensity per unit current) vs. peak current.020*********T A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A2.52.01.51.00.50510********IF – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E EF F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 7. Relative luminous intensity vs. DC forward current.Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 5. Maximum allowable average or DC current vs. ambient temperature.Figure 6. Forward current vs. forward voltage.Green30T A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.500510********I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 9. Maximum allowable average or DC current vs. ambient temperature.Figure 10. Forward current vs. forward voltage.Figure 11. Relative luminous intensity vs. DC forward current.Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current.AlGaAs RedT A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.500510********I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 13. Maximum allowable average or DC current vs. ambient temperature.Figure 14. Forward current vs. forward voltage.Figure 15. Relative luminous intensity vs. DC forward current.Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current.YellowT A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.52.52.01.51.00.50051015202530I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )353.0R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2/semicon-ductorsFor product information and a complete list of distributors, please go to our web site. For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Obsoletes 5988-2971ENJuly 17, 20045988-9421EN。
5082-333Y-KJ200资料
DescriptionThis 7.62 mm (0.3 inch) LED seven-segment display uses industry standard size package and pinout. The device isavailable in either common anodeAgilent HDSP-331x/332E/333x/334x Series 7.62 mm (0.3 inch) General Purpose Seven-Segment DisplayData SheetFeatures•Industry standard size•Industry standard pinout7.62 mm (0.4 inch) character height DIP lead on 2.54 mm •Choice of colorsHigh Efficiency Red (HER), Green,AlGaAs Red, and Yellow •Excellent appearanceEvenly lighted segments gray pack-age gives optimum contrast ± 50° viewing angle •Design flexibilityCommon anode or common cathode Single digitLeft and right hand decimal point•Categorized for luminous intensityGreen and yellow categorized for color Applications•Suitable for indoor use•Not recommended for industrial application, i.e., operating temperature requirementsexceeding +85˚C or below –25˚C [1]•Extreme temperature cycling not recommendedNote:1.For additional details, please contact your local Agilent sales office or an authorized distributor.Devices HERGreenAlGaAs Red Yellow DescriptionPackage Drawing HDSP-331E HDSP-331GHDSP-331AHDSP-331YCommon Anode, Right Hand and A Left Hand DecimalHDSP-332E Common Anode, Right Hand and Left A Hand Decimal without Pin 4, 5 and 12HDSP-333E HDSP-333G HDSP-333A HDSP-333Y Common Cathode, Right Hand B DecimalHDSP-334EHDSP-334GHDSP-334AHDSP-334YCommon Cathode, Right Hand DecimalCor common cathode. The choice of colors includes High Efficiency Red (HER), Green, AlGaAs Red,and Yellow. The gray facedisplays are suitable for indoor use.Part Numbering SystemNotes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.5082 -X X X X-X X X X X HDSP-X X X X-X X X X XMechanical Options [1]00: No Mechanical Option Color Bin Options [1,2]0: No Color Bin LimitationMaximum Intensity Bin [1,2]0: No Maximum Intensity Bin Limitation Minimum Intensity Bin [1,2]0: No Minimum Intensity Bin Limitation Device Configuration/Color [1]A: AlGaAs RedE: High Efficiency Red G: Green Y: YellowDevice Specific Configuration [1]Refer to Respective Datasheet Package [1]Refer to Respective Datasheet∅1.1FRONT VIEWTOP END VIEWA F GB C L.DPD E DIMENSIONS IN MILLIMETERS (INCHES)R.DPNOTE: HDSP-332E DOES NOT HAVE PIN 4, 5 AND 12.Package Drawing APackage Drawing B∅1.1FRONT VIEW TOP END VIEWAF G BCDEDIMENSIONS IN MILLIMETERS (INCHES)R.DPPackage Drawing C∅1.1FRONT VIEW TOP END VIEWAF G BCDEDIMENSIONS IN MILLIMETERS (INCHES)R.DP611310872113.14 COMPIN N0.123678910111314CONNECTION CATHODE A CATHODE F COMMON ANODE CATHODE L.DP CATHODE E CATHODE D CATHODE R.DP CATHODE C CATHODE G CATHODE B COMMON ANODEPINS 4, 5, 12: NO CONNECTION FORHDSP-331E/331G/331Y/331A AND NO PIN FOR HDSP-332EHDSP-331E/331G/331Y/331A/332E9Common AnodeCommon Cathode14138761294.12 COMPIN NO.1246789121314CONNECTION ANODE F ANODE G COMMON CATHODEANODE E ANODE D ANODE C ANODE DP COMMON CATHODEANODE B ANODE AHDSP-333E/333G/333Y/333APINS 3, 5, 10, 11: NCCommon Cathode1098524371.6 COMPIN NO.12345678910CONNECTION COMMON CATHODEANODE E ANODE G ANODE F ANODE D COMMON CATHODEANODE DP ANODE C ANODE B ANODE AHDSP-334E/334G/334Y/334APINS 11, 12, 13, 14: NCElectrical/Optical Characteristics at T A = 25˚C High Efficiency Red (HER)Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 1.15mcd I F = 5 mA 0.81.80mcd I F = 10 mA Forward Voltage V F2.05 2.40V I F = 20 mAPeak Wavelength λPEAK 635nm Dominant Wavelength λd 620nm Reverse VoltageVR5VI R = 100 µAGreen Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 0.8 2.00mcd I F = 10 mA Forward Voltage V F 2.07V I F = 10 mA 1.802.25 2.60V I F = 20 mAPeak Wavelength λPEAK 568nm Dominant Wavelength λd 573nm Reverse VoltageVR5VI R = 100 µAAbsolute Maximum Ratings at T A = 25˚C DescriptionHERGreenAlGaAs Red Yellow HDSP-33xE HDSP-33xG HDSP-33xA HDSP-33xY Units Power Dissipation Segment 65653052mW Forward Current Segment25[1]25[2]15[3]20[4]mA Peak Forward Current per Segment 1001008080mA (1/10 Duty Factor at 10 kHz)Operating Temperature Range –35 to +85–35 to +85–35 to +85–35 to +85˚C Storage Temperature Range–35 to +85–35 to +85–35 to +85–35 to +85˚C Reverse Voltage per Segment or DP5555V Wave Soldering Temperature for 3 Seconds 250250250250˚C(at 2 mm Distance from the Body)Notes:1.Derate above 25˚C at 0.33 mA/˚C.2.Derate above 25˚C at 0.33 mA/˚C.3.Derate above 25˚C at 0.2 mA/˚C.4.Derate above 25˚C at 0.27 mA/˚C.331G 333G 334G331E 332E 333E 334EYellow Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 0.71mcd I F = 5 mA 0.801.50mcd I F = 10 mA Forward Voltage V F2.15 2.60V I F = 20 mAPeak Wavelength λPEAK 595nm Dominant Wavelength λd 590nm Reverse VoltageVR5VI R = 100 µAAlGaAs Red Devices HDSP-ParameterSymbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment I V 3.93mcd I F = 5 mA 2.0014.20mcd I F = 10 mA Forward Voltage V F 1.85 2.00V I F = 20 mAPeak Wavelength λPEAK 660nm Dominant Wavelength λd 643nm Reverse VoltageVR5VI R= 100 µA331Y 333Y 334Y331A 333A 334AIntensity Bin Limits (mcd at 10 mA)HER/Green/Yellow AlGaAs RedBin Name Min.[1]Max.[1]Min.[1]Max.[1]G 0.801 1.250NA NA H 1.251 2.000NA NA I 2.001 3.200 2.001 3.200J NA NA 3.201 5.050KNA NA5.0518.000Note:1.Tolerance for each bin limit is ± 10%.Color Bin Limits (nm at 10 mA)Dominant Wavelength (nm)Color Bin Min.Max.Note:1.Tolerance for each bin limit is 1 nm.Figure 1. Maximum allowable average or DC current vs. ambient temperature.Figure 2. Forward current vs. forward voltage.Figure 3. Relative luminous intensity vs. DC forward current.High Efficiency Red (HER)Figure 4. Relative efficiency (luminousintensity per unit current) vs. peak current.020*********T A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A2.52.01.51.00.50510********IF – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E EF F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 7. Relative luminous intensity vs. DC forward current.Figure 8. Relative efficiency (luminous intensity per unit current) vs. peak current.Figure 5. Maximum allowable average or DC current vs. ambient temperature.Figure 6. Forward current vs. forward voltage.Green30T A – AMBIENT TEMPERATURE – °CM A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.500510********I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 9. Maximum allowable average or DC current vs. ambient temperature.Figure 10. Forward current vs. forward voltage.Figure 11. Relative luminous intensity vs. DC forward current.Figure 12. Relative efficiency (luminous intensity per unit current) vs. peak current.AlGaAs RedT A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.02.52.01.51.00.500510********I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )35R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )05101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2Figure 13. Maximum allowable average or DC current vs. ambient temperature.Figure 14. Forward current vs. forward voltage.Figure 15. Relative luminous intensity vs. DC forward current.Figure 16. Relative efficiency (luminous intensity per unit current) vs. peak current.YellowT A – AMBIENT TEMPERATURE – °C M A X I M U M D C C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – VI F – F O R W A R D C U R R E N T P E R S E G M E N T – m A3.52.52.01.51.00.50051015202530I F – FORWARD CURRENT FOR SEGMENT – mAR E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 10 m A )353.0R E L A T I V E E F F I C I E N C Y (N O R M A L I Z E D T O 1 A T 10 m A )1.4005101520253035404550I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA0.20.40.60.81.01.2/semicon-ductorsFor product information and a complete list of distributors, please go to our web site. For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152(Domestic/ International), or 0120-61-1280(Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843Data subject to change.Obsoletes 5988-2971ENJuly 17, 20045988-9421EN。
5082-3601-LI500资料
Features• Industry Standard Size • Industry Standard Pinout7.62 mm (0.300 inch) DIP Leads on 2.54 mm (0.100 inch) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red,Yellow, Green• Excellent Appearance Evenly Lighted Segments ±50° Viewing AngleOptimum Contrast Given byGray Top Surface for AlGaAs Red and Green DevicesRed Top Surface for HER Devices Yellow Top Surface for Yellow Devices• Design Flexibility Common Anode or Common Cathode Single DigitsLeft or Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing• Intensity and Color Selection AvailableSee Intensity and Color Selected Displays Data Sheet• Sunlight Viewable AlGaAsAlGaAs [1]HER [1]Yellow Green Package Red HDSP-5082-5082-HDSP-DescriptionDrawing7610762036007.6 mm Common Anode Left Hand Decimal A 7611762136017.6 mm Common Anode Right Hand Decimal B 7613762336037.6 mm Common Cathode Right Hand Decimal C 7616762636067.6 mm Universal ±1. Overflow Right Hand Decimal [2]D E15076507660460010.9 mm Common Anode Left Hand Decimal E E15176517661460110.9 mm Common Anode Right Hand Decimal F E15376537663460310.9 mm Common Cathode Right Hand Decimal G E15676567666460610.9 mm Universal ±1. Overflow Right Hand Decimal [2]HNotes:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation.2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.Devices5082-761x Series 5082-762x Series 5082-765x Series 5082-766x Series HDSP-360x Series HDSP-460x Series HDSP-E15x Series7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays Technical DataDescriptionThe 7.6 mm (0.3 inch) and 10.9mm (0.43 inch) LED sevensegment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet).These devices use an industry standard size package andpinouts. All devices are available as either common anode or common cathode.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation4: Color Bin 4 Only (applicable for Green devices only)B: Color Bins 2 and 3 (applicable for Yellow devices only)Maximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]0: Common Anode1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa-tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.NOTES;1. DIMENSIONS IN MILLIMETRES AND (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. UNUSED DP POSITION.5. SEE INTERNALCIRCUIT DIAGRAM.6. REDUNDANT CATHODE.7. SEE PART NUMBER TABLE FOR L.H.D.P.AND R.H.D.P.DESIGNATION.8. FOR YELLOW AND GREEN DEVICES ONLY.Package DimensionsThese displays are ideal for most applications. Pin for pin equiva-lent displays are also available in a low current or high lightambient design. The low currentInternal Circuit DiagramAbsolute Maximum RatingsAlGaAs Red HER Yellow GreenHDSP-E1505082-7610/5082-7620/HDSP-3600/ Description Series7650 Series7660 Series4600 Series Units Average Power per Segment or DP9610580105mW Peak Forward Current per160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per40[2]30[4]20[6]30[8]mA Segment or DPOperating Temperature Range-20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for3 Seconds (1.59 mm [0.063 in.] 250°Cbelow Body)Notes:1.See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V8.515.0mcd I F = 20 mA(Digit Average)1.8V I F = 20 mAForward Voltage/Segment or DP V F2.03.0V I F = 100 mAHDSP-E15x Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN340°C/W/Segto-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions 5082-761x Luminous Intensity/Segment[1,2,6]340800µcd I F = 5 mA (Digit Average)I V5082-765x3401115µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nm AllReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN280°C/WJunction-to-PinDevice Series ParameterSymbol Min.Typ.Max.Units Test Conditions 5082-762x Luminous Intensity/Segment [1,2]205620µcdI F = 5 mA(Digit Average)I V5082-766x290835µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mAPeak WavelengthλPEAK 583nm Dominant Wavelength [3,7]λd 581.5586592.5nm AllReverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ-PIN280°C/W/SegJunction-to-PinYellowNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series.6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series.7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.High Performance GreenDevice Test Series ParameterSymbol Min.Typ.Max.Units Conditions HDSP-360x Luminous Intensity/Segment [1,2]8602700µcdI F = 10 mA(Digit Average)I VHDSP-460x10304000µcd I F = 10 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mAPeak WavelengthλPEAK 566nm Dominant Wavelength [3,7]λd 571577nm AllReverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ -PIN280°C/W/SegJunction-to-PinFigure 3. Forward Current vs. Forward Voltage.Figure 2. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.AlGaAs RedI D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )0I F – FORWARD CURRENT PER SEGMENT – mA2.001.501.250.750.2520401.751.000.5010305152535ηP E A K – N O R M A L I Z E D R E L A T I V E EF F I C I E N C Y0.5I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA50.0150.05.0HER, Yellow, GreenFigure 8. Allowable Peak Current vs.Pulse Duration – Green Series.Figure 9. Maximum Allowable DC Current vs.Ambient Temperature.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 10. Forward Current vs.Forward Voltage.Figure 12. Relative LuminousEfficiency (Luminous Intensity per Unit Current) vs. Peak Current.HDSP-E15x IV Bin Category Min.Max.L 8.6715.90M 13.0023.80N 19.5035.80O 29.3053.60P 43.9080.50Intensity Bin Limits (mcd)AlGaAs RedHER5082-761x IV Bin Category Min.Max.B 0.3690.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.1775082-765xIV Bin Category Min.Max.B 0.3470.593C 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751Yellow5082-762x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.413 4.4255082-766xIV Bin Category Min.Max.C 0.2970.543D 0.4450.817E 0.669 1.225F 1.003 1.838G 1.504 2.758H 2.2564.137HDSP-460xIV Bin Category Min.Max.G 1.03 1.88H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26GreenHDSP-360x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningFor information on solderingLEDs, please refer to ApplicationNote 1027.元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5963-7394EJuly 17, 20045988-3325EN。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Features• Industry Standard Size • Industry Standard Pinout7.62 mm (0.300 inch) DIP Leads on 2.54 mm (0.100 inch) Centers • Choice of ColorsAlGaAs Red, High Efficiency Red,Yellow, Green• Excellent Appearance Evenly Lighted Segments ±50° Viewing AngleOptimum Contrast Given byGray Top Surface for AlGaAs Red and Green DevicesRed Top Surface for HER Devices Yellow Top Surface for Yellow Devices• Design Flexibility Common Anode or Common Cathode Single DigitsLeft or Right Hand Decimal Point ±1. Overflow Character• Categorized for Luminous IntensityYellow and Green Categorized for ColorUse of Like Categories Yields a Uniform Display • High Light Output • High Peak Current• Excellent for Long Digit String Multiplexing• Intensity and Color Selection AvailableSee Intensity and Color Selected Displays Data Sheet• Sunlight Viewable AlGaAsAlGaAs [1]HER [1]Yellow Green Package Red HDSP-5082-5082-HDSP-DescriptionDrawing7610762036007.6 mm Common Anode Left Hand Decimal A 7611762136017.6 mm Common Anode Right Hand Decimal B 7613762336037.6 mm Common Cathode Right Hand Decimal C 7616762636067.6 mm Universal ±1. Overflow Right Hand Decimal [2]D E15076507660460010.9 mm Common Anode Left Hand Decimal E E15176517661460110.9 mm Common Anode Right Hand Decimal F E15376537663460310.9 mm Common Cathode Right Hand Decimal G E15676567666460610.9 mm Universal ±1. Overflow Right Hand Decimal [2]HNotes:1. These displays are recommended for high ambient light operation. Please refer to the HDSP-E10X AlGaAs and HDSP-335X HER data sheet for low current operation.2. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram D.3. Universal pinout brings the anode and cathode of each segment’s LED out to separate pins. See internal diagram H.Devices5082-761x Series 5082-762x Series 5082-765x Series 5082-766x Series HDSP-360x Series HDSP-460x Series HDSP-E15x Series7.6 mm (0.3 inch)/10.9 mm (0.43 inch) Seven Segment Displays Technical DataDescriptionThe 7.6 mm (0.3 inch) and 10.9mm (0.43 inch) LED sevensegment displays are designed for viewing distances up to 3 metres (10 feet) and 5 metres (16 feet).These devices use an industry standard size package andpinouts. All devices are available as either common anode or common cathode.Part Numbering System5082 -X X X X-X X X X XHDSP-X X X X-X X X X XMechanical Options[1]00: No Mechanical OptionColor Bin Options[1,2]0: No Color Bin Limitation4: Color Bin 4 Only (applicable for Green devices only)B: Color Bins 2 and 3 (applicable for Yellow devices only)Maximum Intensity Bin[1,2]0: No Maximum Intensity Bin LimitationMinimum Intensity Bin[1,2]0: No Minimum Intensity Bin LimitationDevice Configuration/Color[1]0: Common Anode1: Common Anode3: Common CathodeDevice Specific Configuration[1]Refer to Respective DatasheetPackage[1]E: 10.9 mm (0.43 inch) Single Digit Seven Segment Display Notes:1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearestAgilent representative for details.2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.displays are ideal for portable applications. The high light ambient displays are ideal for high light ambients or long string lengths. For additional informa-tion see the Low Current Seven Segment Displays, or High Light Ambient Seven Segment Displays data sheets.NOTES;1. DIMENSIONS IN MILLIMETRES AND (INCHES).2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.3. REDUNDANT ANODES.4. UNUSED DP POSITION.5. SEE INTERNALCIRCUIT DIAGRAM.6. REDUNDANT CATHODE.7. SEE PART NUMBER TABLE FOR L.H.D.P.AND R.H.D.P.DESIGNATION.8. FOR YELLOW AND GREEN DEVICES ONLY.Package DimensionsThese displays are ideal for most applications. Pin for pin equiva-lent displays are also available in a low current or high lightambient design. The low currentInternal Circuit DiagramAbsolute Maximum RatingsAlGaAs Red HER Yellow GreenHDSP-E1505082-7610/5082-7620/HDSP-3600/ Description Series7650 Series7660 Series4600 Series Units Average Power per Segment or DP9610580105mW Peak Forward Current per160[1]90[3]60[5]90[7]mA Segment or DPDC Forward Current per40[2]30[4]20[6]30[8]mA Segment or DPOperating Temperature Range-20 to +100[9]-40 to +100°C Storage Temperature Range -55 to +100°C Reverse Voltage per 3.0V Segment or DPWave Soldering Temperature for3 Seconds (1.59 mm [0.063 in.] 250°Cbelow Body)Notes:1.See Figure 1 to establish pulsed conditions.2. Derate above 46°C at 0.54 mA/°C.3. See Figure 6 to establish pulsed conditions.4. Derate above 53°C at 0.45 mA/°C.5. See Figure 7 to establish pulsed conditions.6. Derate above 81°C at 0.52 mA/°C.7. See Figure 8 to establish pulsed conditions.8. Derate above 39°C at 0.37 mA/°C.9. For operation below -20°C, contact your local Agilent components sales office or an authorized distributor.Electrical/Optical Characteristics at T A = 25°CAlGaAs RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions Luminous Intensity/Segment[1,2,5]I V8.515.0mcd I F = 20 mA(Digit Average)1.8V I F = 20 mAForward Voltage/Segment or DP V F2.03.0V I F = 100 mAHDSP-E15x Peak WavelengthλPEAK645nmDominant Wavelength[3]λd637nmReverse Voltage/Segment or DP[4]V R 3.015V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED Junction-RθJ-PIN340°C/W/Segto-PinHigh Efficiency RedDeviceSeries Parameter Symbol Min.Typ.Max.Units Test Conditions 5082-761x Luminous Intensity/Segment[1,2,6]340800µcd I F = 5 mA (Digit Average)I V5082-765x3401115µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 20 mAPeak WavelengthλPEAK635nmDominant Wavelength[3]λd626nm AllReverse Voltage/Segment or DP[4]V R 3.030V I R = 100 µATemperature Coefficient of∆V F/°C-2mV/°CV F/Segment or DPThermal Resistance LED RθJ-PIN280°C/WJunction-to-PinDevice Series ParameterSymbol Min.Typ.Max.Units Test Conditions 5082-762x Luminous Intensity/Segment [1,2]205620µcdI F = 5 mA(Digit Average)I V5082-766x290835µcd I F = 5 mA Forward Voltage/Segment or DP V F 2.2 2.5V I F = 20 mAPeak WavelengthλPEAK 583nm Dominant Wavelength [3,7]λd 581.5586592.5nm AllReverse Voltage/Segment or DP [4]V R 3.040V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ-PIN280°C/W/SegJunction-to-PinYellowNotes:1. Device case temperature is 25°C prior to the intensity measurement.2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.3. The dominant wavelength, λd , is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.4. Typical specification for reference only. Do not exceed absolute maximum ratings.5. For low current operation, the AlGaAs HDSP-E10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin compatible with the HDSP-E15X series.6. For low current operation, the HER HDSP-335X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin compatible with the 5082-7650 series.7. The Yellow (5082-7620/7660) and Green (HDSP-3600/4600) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter.High Performance GreenDevice Test Series ParameterSymbol Min.Typ.Max.Units Conditions HDSP-360x Luminous Intensity/Segment [1,2]8602700µcdI F = 10 mA(Digit Average)I VHDSP-460x10304000µcd I F = 10 mA Forward Voltage/Segment or DP V F 2.1 2.5V I F = 10 mAPeak WavelengthλPEAK 566nm Dominant Wavelength [3,7]λd 571577nm AllReverse Voltage/Segment or DP [4]V R 3.050V I R = 100 µA Temperature Coefficient of ∆V F /°C -2mV/°C V F /Segment or DP Thermal Resistance LED R θJ -PIN280°C/W/SegJunction-to-PinFigure 3. Forward Current vs. Forward Voltage.Figure 2. Maximum Allowable DC Current vs.Ambient Temperature.Figure 4. Relative Luminous Intensity vs. DC Forward Current.Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current.AlGaAs RedI D C M A X . – M A X I M U M D C C U R R E N T P E R S E G M E N T – m AT A – AMBIENT TEMPERATURE – °C5030102051525354045I F – F O R W A R D C U R R E N T P E R S E G M E N T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D T O 1 A T 20 m A )0I F – FORWARD CURRENT PER SEGMENT – mA2.001.501.250.750.2520401.751.000.5010305152535ηP E A K – N O R M A L I Z E D R E L A T I V E EF F I C I E N C Y0.5I PEAK – PEAK FORWARD CURRENTPER SEGMENT – mA50.0150.05.0HER, Yellow, GreenFigure 8. Allowable Peak Current vs.Pulse Duration – Green Series.Figure 9. Maximum Allowable DC Current vs.Ambient Temperature.Figure 11. Relative LuminousIntensity vs. DC Forward Current.Figure 10. Forward Current vs.Forward Voltage.Figure 12. Relative LuminousEfficiency (Luminous Intensity per Unit Current) vs. Peak Current.HDSP-E15x IV Bin Category Min.Max.L 8.6715.90M 13.0023.80N 19.5035.80O 29.3053.60P 43.9080.50Intensity Bin Limits (mcd)AlGaAs RedHER5082-761x IV Bin Category Min.Max.B 0.3690.630C 0.5160.946D 0.774 1.418E 1.160 2.127F 1.740 3.190G 2.610 4.785H 3.9157.1775082-765xIV Bin Category Min.Max.B 0.3470.593C 0.4850.890D 0.728 1.333E 1.091 2.000F 1.636 3.000G 2.454 4.500H 3.6826.751Yellow5082-762x IV Bin Category Min.Max.B 0.2290.387C 0.3170.582D 0.4760.872E 0.714 1.311F 1.073 1.967G 1.609 2.950H 2.413 4.4255082-766xIV Bin Category Min.Max.C 0.2970.543D 0.4450.817E 0.669 1.225F 1.003 1.838G 1.504 2.758H 2.2564.137HDSP-460xIV Bin Category Min.Max.G 1.03 1.88H 1.54 2.82I 2.31 4.23J 3.46 6.34K 5.189.50L 7.7814.26GreenHDSP-360x IV Bin Category Min.Max.H 0.86 1.58I 1.29 2.37J 1.94 3.55K 2.90 5.33L 4.378.01Color CategoriesNote:All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information.Contrast EnhancementFor information on contrastenhancement, please seeApplication Note 1015.Soldering/CleaningFor information on solderingLEDs, please refer to ApplicationNote 1027.元器件交易网/semiconductorsFor product information and a complete list ofdistributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or(916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5963-7394EJuly 17, 20045988-3325EN。