PM100RSD120资料

Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output 100 Amperes/1200 Volts
PM100RSD120
Description:
Powerex Intellimod™ Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices.
Features:
□Complete Output Power Circuit
□Gate Drive Circuit □Protection Logic –Short Circuit –Over Current
–Over Temperature –Under Voltage
□Low Loss Using 4th Generation IGBT Chip Applications:□Inverters □UPS
□Motion/Servo Control □Power Supplies
Ordering Information:
Example: Select the complete part number from the table below -i.e. PM100RSD120 is a 1200V ,100 Ampere Intellimod™ Intelligent Power Module.
Type Current Rating V CES Amperes
Volts (x 10)PM
100
120
Outline Drawing and Circuit Diagram Dimensions
Inches Millimeters A 5.31±0.04135.0±1.0B 4.74±0.02120.5±0.5C 4.33±0.04110.0±1.0D 4.27108.5E 3.76±0.0295.5±0.5F 3.2983.5G 2.0151.0H 1.60240.68J 1.5439.0K 1.3734.7L 1.3333.7M 1.0226.0N 0.95 +0.06/-0.024.1 +1.5/-0.0
P 0.8521.5Q 0.7920.0R
0.780
19.82
Dimensions
Inches Millimeters S 0.6917.5T 0.6516.5U 0.5213.2V 0.4311.0W 0.39 10.0
X 0.16 4.0Y 0.2857.25Z 0.24 6.0AA 0.22 Dia.Dia. 5.5AB Metric M5M5AC 0.128 3.22AD 0.10 2.6AE 0.08 2.0AF 0.07 1.8AG 0.06 1.6AH
0.02
0.5
PM100RSD120
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output 100 Amperes/1200 Volts
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272Absolute Maximum Ratings, T j = 25°C unless otherwise specified
Characteristics
Symbol PM100RSD120Units Power Device Junction T emperature T j -20 to 150°C Storage Temperature T stg -40 to 125°C Case Operating Temperature *T C -20 to 100
°C Mounting Torque, M5 Mounting Screws —31in-lb Mounting Torque, M5 Main Terminal Screws —31in-lb Module Weight (Typical)
—920Grams Supply Voltage Protected by OC and SC
V CC(prot.)
800
Volts
(V D = 13.5 - 16.5V , Inverter Part) T j = 125°C Start Isolation Voltage, AC 1 minute, 60Hz Sinusoidal
V ISO
2500
Volts
IGBT Inverter Sector
Collector-Emitter Voltage (V D = 15V , V CIN = 15V)V CES 1200Volts Collector Current, ± (T C = 25°C)I C 100Amperes Peak Collector Current, ± (T C = 25°C)I CP 200Amperes Supply Voltage (Applied between P - N)V CC 800Volts Supply Voltage, Surge (Applied between P - N)V CC(surge)
1000Volts Collector Dissipation (T C = 25°C)
P C
595
Watts
IGBT Brake Sector
Collector-Emitter Voltage (V D = 15V , V CIN = 15V)V CES 1200Volts Collector Current, ± (T C = 25°C)I C 50Amperes Peak Collector Current, ± (T C = 25°C)I CP 100Amperes FWDi Rated DC Reverse Voltage (T C = 25°C)V R(DC)1200Volts FWDi Forward Current (T C = 25°C)I F 50Amperes Collector Dissipation (T C = 25°C)
P C
416
Watts
Control Sector
Supply Voltage Applied between (V UP1-V UPC , V VP1-V VPC , V WP1-V WPC , V N1-V NC )V D 20Volts Input Voltage Applied between (U P -V UPC , V P -V VPC , W P -V WPC , U N , V N , W N , B r -V NC )V CIN 20Volts Fault Output Supply Voltage Applied between V FO
20
Volts
(U FO -V UPC , V FO -V VPC , W FO -V WPC , F O -V NC )Fault Output Current (U FO , V FO , W FO , F O )
I FO
20
mA
*T C
Measure Point
C
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PM100RSD120
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output
100 Amperes/1200 Volts
Electrical and Mechanical Characteristics, T j = 25°C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ.Max.Units IGBT Inverter Sector
Collector Cutoff Current I CES V CE = V CES, T j = 25°C, V D = 15V—— 1.0mA
V CE = V CES, T j = 125°C, V D = 15V——10mA Diode Forward Voltage V EC-I C = 100A, V D = 15V, V CIN = 15V— 2.5 3.5Volts Collector-Emitter Saturation Voltage V CE(sat)V D = 15V, V CIN = 0V, I C = 100A,— 2.4 3.2Volts
Pulsed, T j = 25°C
V D = 15V, V CIN = 0V, I C = 100A,— 2.1 2.8Volts
Pulsed, T j = 125°C
Inductive Load Switching Times on
rr D CIN
C(on)CC C
off j
C(off)
IGBT Brake Sector
Collector Cutoff Current I CES V CE = V CES, T j = 25°C, V D = 15V—— 1.0mA
V CE = V CES, T j = 125°C, V D = 15V——10mA FWDi Forward Voltage V FM I F = 50A— 2.5 3.5Volts Collector-Emitter Saturation Voltage V CE(sat)V D = 15V, V CIN = 0V, I C = 50A,— 2.65 3.30Volts
Pulsed, T j = 25°C
V D = 15V, V CIN = 0V, I C = 50A,— 2.60 3.25Volts
Pulsed, T j = 125°C
Control Sector
Over Current T rip Level Inverter Part OC T j = 25°C228345—Amperes (V D = 15V)T j = 125°C145——Amperes Over Current T rip Level Brake Part OC-20°C ≤ T j≤ 125°C, V D = 15V75——Amperes
j D
Over Current Delay Time t off(OC)V D = 15V—10—µS Over Temperature Protection (V D = 15V)OT Trip Level111118125°C (Lower Arm)OT R Reset Level—100—°C Supply Circuit Under Voltage Protection UV Trip Level11.512.012.5Volts (-20 ≤ T j≤ 125°C)UV R Reset Level—12.5—Volts Circuit Current I D V D = 15V, V CIN = 15V, V N1-V NC—6082mA
V D = 15V, V CIN = 15V, V XP1-V XPC—1520mA Input ON Threshold Voltage V CIN(on)Applied between U P-V UPC, V P-V VPC, 1.2 1.5 1.8Volts
CIN(off)P WPC N N N r NC
Fault Output Current*I FO(H)V D = 15V, V CIN = 15V——0.01mA
I FO(L)V D = 15V, V CIN = 15V—1015mA Minimum Fault Output Pulse Width*t FO V D = 15V 1.0 1.8—mS
*Fault output is given only when the internal OC, SC, OT and UV protections schemes of either upper or lower arm device operate to protect it.
Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
PM100RSD120
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output
100 Amperes/1200 Volts
Thermal Characteristics
Characteristic Symbol Condition Min. Typ.Max.Units Junction to Case Thermal Resistance R th(j-c)Q Each IGBT——0.21°C/Watt Inverter Part R th(j-c)F Each FWDi——0.35°C/Watt
R th(j-c´)Q Each IGBT*—— 0.13**°C/Watt
R th(j-c´)F Each FWDi*—— 0.21**°C/Watt Junction to Case Thermal Resistance R th(j-c)Q Each IGBT——0.30°C/Watt Brake Part R th(j-c)F Each FWDi——0.80°C/Watt
R th(j-c´)Q Each IGBT*—— 0.22**°C/Watt
R th(j-c´)F Each FWDi*—— 0.36**°C/Watt Contact Thermal Resistance R th(c-f)Case to Fin Per Module,—— 0.018°C/Watt
Thermal Grease Applied
*T C measured point is just under the chips.
**If you use this value, R th(f-a) should be mesured just under the chips.
Recommended Conditions for Use
Characteristic Symbol Condition Value Units Supply Voltage V CC Applied across P-N Terminals0 ~ 800Volts Control Supply Voltage***V D Applied between V UP1-V UPC,15 ± 1.5Volts
V N1-V NC, V VP1-V VPC, V WP1-V WPC
CIN(on)P UPC P VPC
CIN(off)P WPC N,N N, r NC D
PWM Input Frequency f PWM Using Application Circuit0 ~ 20kHz Minimum Dead Time t DEAD Input Signal≥ 3.0µS
***With ripple satisfying the following conditions: dv/dt ≤±5v/µs, Variation ≤ 2V peak to peak.
PM100RSD120
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output 100 Amperes/1200 Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272Inverter Part
01.02.03.0
SATURATION VOLTAGE CHARACTERISTICS (TYPICAL)
COLLECTOR CURRENT, I C , (AMPERES)
S A T U R A T I O N V O L T A G E , V C E (s a t ), (V O L T S )
120
20
40
0.5
1.5
2.560
80
100
100
101
102
DIODE FORWARD CHARACTERISTICS
(TYPICAL)
DIODE FORWARD VOLTAGE, V EC , (VOLTS)
D I O D
E C U R R E N T , -I C , (A M P E R E S )
0.5
1.0
1.5
2.0
3.0
2.50
101
102
103
10-1
COLLECTOR CURRENT, I C , (AMPERES)
S W I T C H I N G T I M E S , t o n , t o f f , (µs )
SWITCHING TIME VS.
COLLECTOR CURRENT (TYPICAL)
100101
101
102
103
10-1
COLLECTOR CURRENT, I C , (AMPERES)
S W I T C H I N G T I M E S , t c (o n ), t c (o f f ), (µs )
SWITCHING TIME VS.
COLLECTOR CURRENT (TYPICAL)100
101
101
102
10310-2
COLLECTOR CURRENT, -I C , (AMPERES)
R E V E R S E R E C O V E R Y T I M E , t r r , (µS )
REVERSE RECOVERY CURRENT VS.COLLECTOR CURRENT (TYPICAL)10-1
100
100R E V E R S E R E C O V E R Y C U R R E N T , I r r , (A M P E R E S )101
102
040
60
80
100
CIRCUIT CURRENT VS.CARRIER FREQUENCY
CARRIER FREQUENCY, f C , (kHz)
C C I R C U I T C U R R E N T , I
D , (m A )
5
10
15
20
25
20
101
102
103
10-1
S W I T C H I N G L O S S , E S W , (m )J /P U L S E )
SWITCHING LOSS CHARACTERISTICS
(TYPICAL)
100
102
101
TIME, (s)
T R A N S I E N T I M P E D A N C E , Z t h (j -c ), (N O R M A L I Z E D V A L U E )
TRANSIENT THERMAL
IMPEDANCE CHARACTERISTICS (IGBT & FWDi - INVERTER PART)
101
10-1
100101
100
10-1
10-2
10-3
10-210-3
COLLECTOR CURRENT, I C , (AMPERES)
PM100RSD120
Intellimod™ Module
Three Phase + Brake IGBT Inverter Output 100 Amperes/1200 Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272Brake Part
TIME, (s)
T R A N S I E N T I M P E D A N C E , Z t h (j -c ), (N O R M A L I Z E D V A L U E )
TRANSIENT THERMAL
IMPEDANCE CHARACTERISTICS (IGBT & FWDi BRAKE PART)
10110-1
100
101
100
10-1
10-2
10-3
10-210-3
1.02.03.0COLLECTOR-EMITTER SATURATION
VOLTAGE (TYPICAL)
SUPPLY VOLTAGE, V D , (VOLTS)
0.5S A T U R A T I O N V O L T A G E , V C E (s a t ), (V O L T S )
1.5
2.501.02.0
3.0
COLLECTOR-EMITTER SATURATION
VOLTAGE (TYPICAL)
COLLECTOR CURRENT, I C
, (AMPERES)
10
20
4060
0.5S A T U R A T I O N V O L T A G E , V C E (s a t ), (V O L T S )
1.5
2.550
30
1.0
OUTPUT CHARACTERISTICS
(TYPICAL)
COLLECTOR-EMITTER VOLTAGE, V CE , (VOLTS)
3.0
3060 2.0
0.5
1.5
2.5
10204050C O L L E C T O R C U R R E N T , I C , (A M P E R E S )
100
101
102
DIODE FORWARD CHARACTERISTICS
(TYPICAL)
DIODE FORWARD VOLTAGE, V EC , (VOLTS)
D I O D
E C U R R E N T , -I C , (A M P E R E S )
0.5
1.0
1.5
2.0 2.5。