744028002;中文规格书,Datasheet资料
07200;中文规格书,Datasheet资料
DRAWING NUMBER
PHONE (781) 821-8370
© 2011 DESCO INDUSTRIES INC.
Employee Owned
FAX (781) 575-0172
07200
DATE May 2011
/
分销商库存信息:
DESCO 07200
20"
18
"
Laundering Instructions:
If need be, this cover can be laundered. Use cool or warm water. Maximum temperature 120 °F. Do not use bleach, tumble dry on cool. Chair not included
Product marked with ESD protective symbol to identify used for ESD control “Fabric upholstered chairs accomplish this by using conductive fibers wovenห้องสมุดไป่ตู้into the fabric. The fabric is then connected through the components of the chair, through the cylinder, base and casters (or drag chain) to the floor.” [ESD Handbook TR20.20 Seating section 5.3.5.2 Types and Selection] If not otherwise noted, tolerance ±10% Specifications and procedures subject to change without notice
744053270;中文规格书,Datasheet资料
description :A mmB mmC mmD mmE mmF G H= Start of winding Marking = Inductance codeEigenschaften / properties Wert / valueEinheit / unittol.Induktivität /inductanceDC-Widerstand /DC-resistance DC-Widerstand /DC-resistance Nennstrom /rated currentSättigungsstrom /saturation current Eigenres.-Frequenz /self-res.-fequency33% Umgebungstemperatur / temperature:+20°CFerrit CZ10-08-02ME 09-01-15MST08-04-11MST04-10-11SST04-03-11Name Datum / dateKunde / customerFreigabe erteilt / general release:C Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:E Testbedingungen / test conditions:Luftfeuchtigkeit / humidity:It is recommended that the temperature of the part does F Werkstoffe & Zulassungen / material & approvals:Draht / wire:Endoberfläche / finishing electrode:Class HSn/Ag/Cu - 96.5/3.0/0.5%G Eigenschaften / general specifications:Betriebstemp. / operating temperature: -40°C - + 125°C DATUM / DATE : 2010-08-02max.mA Datum / date.................................................................................Unterschrift / signature Kontrolliert / approvedTestbedingungen / test conditions D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked SRFMHzUmgebungstemp. / ambient temperature: -40°C - + 85°C Basismaterial / base material:not exceed 125°C under worst case operating conditions.POWER-CHOKE WE-TPCA Mechanische Abmessungen / dimensions:2,0 typ.1,90typ.2,8 ± 0,2HP 34401 A für/for R DC und I DC0,160± 30%27,00µH800R DC typ 0,125I DC D Prüfgeräte / test equipment:HP 4274 A für/for L und/and Q @ 20°C @ 20°C ∆T=30 K 100 kHZ / 0,1V105015,00I sat |ΔL/L|<35%Version 5.....................................................................................................................................................................................................................................................Würth Elektroniktyp.R DC max typ.L max.mA typ.Version 45,8 ± 0,35,8 ± 0,3Type 5828Änderung / modificationVersion 1Version 2Version 6[mm]6,302,201,902,202,20MarkingABCDDEdescription :CZ10-08-02ME 09-01-15MST08-04-11MST04-10-11SST04-03-11Name Datum / dateFreigabe erteilt / general release:Kontrolliert / approvedDATUM / DATE : 2010-08-02Würth ElektronikKunde / customer...................................................................................................................................................................POWER-CHOKE WE-TPCH Induktivitätskurve / Inductance curve :Version 4Version 5Änderung / modificationVersion 1Version 2D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Datum / dateUnterschrift / signature Version 6 ...................................................................................................................................................................Geprüft / checked 0,005,0010,0015,0020,0025,0030,000,000,200,400,600,801,001,201,40L (µH )Current (A)Induktivität vs Strom (typ.) / Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 12,0± 1,0mm B4,00± 0,1mma178± 0,5mm b 20,20± 0,1mm+ 0,5- 1,0d 50,0± 1,0mmCZ10-08-02ME 09-01-15MST08-04-11MST04-10-11SST04-03-11Name Datum / dateWürth Elektronik...................................................................................................................................................................Würth Elektronik eiSos GmbH & Co.KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modification...................................................................................................................................................................Datum / dateUnterschrift / signature Gurtspezifikation / Tape specification: Rollenspezifikation / Reel specification:Freigabe erteilt / general release:Kunde / customermm 13,00POWER-CHOKE WE-TPCDATUM / DATE : 2010-08-02Version 5c Version 1Version 2Version 4Version 6Ø cadbThe force for tearing off cover tape is 20 to 70 grams in arrow direction150feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control),transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 744053270。
0424106552;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42410-6552Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, 6/2, Panel StopsDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42410 (PDF)GeneralProduct Family Modular Jacks/Plugs Series42410CommentsFlush Mount|Flangeless|2 PCB Thick Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ11UPC800753815520PhysicalColor - ResinBlack Durability (mating cycles max)500Inverted / Top Latch N/AJack Height16.38mm Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB RetentionYes PCB Thickness - Recommended 3.20mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts6/2Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +80°C Termination Interface: Style Through Hole Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact 1.5A ShieldedNo Voltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process CapabilityWave Capable (TH only)Max. Cycles at Max. Process Temperature 1Process Temperature max. C235Material InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42410Series Mates With FCC 68 PlugsReference - Drawing NumbersProduct Specification PS-42410Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0424106552。
0440670402;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44067-0402Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0™ Wire-to-Board Header, Dual Row, Vertical for up to 3.56mm Thick PCB, 4 Circuits, 0.38µm Gold (Au) Selective PlatingDocuments:3D ModelTest Summary TS-43045-002 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-43045 (PDF)GeneralProduct Family PCB Headers Series44067Application Power, Wire-to-BoardComments High Temperature, Polarization Key to PCB OverviewMicro-Fit 3.0™ Connectors Product Name Micro-Fit 3.0™UPC800754773225PhysicalBreakawayNo Circuits (Loaded)4Circuits (maximum)4Color - ResinBlack Durability (mating cycles max)30First Mate / Last Break No Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part None Lock to Mating PartYes Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Net Weight0.741/g Number of Rows 2Orientation Vertical PC Tail Length 4.01mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.60mm Packaging TypeTray Pitch - Mating Interface3.00mm Pitch - Termination Interface 3.00mm Plating min - Mating0.381µm Plating min - Termination 2.540µm Polarized to PCB Yes Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating -40°C to +105°CTermination Interface: StyleThrough Hole - Kinked Pin ElectricalCurrent - Maximum per Contact 5A Voltage - Maximum250VSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44067SeriesMates With43025 Micro-Fit™ HeaderSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature3Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-43045Sales Drawing SD-44067-001Test Summary TS-43045-002This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0440670402。
742792604;中文规格书,Datasheet资料
6.1 6.0 5.02012-06-262012-03-292007-02-01SStSStSKleSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:Test Equipment: E4991A or equivalentF Derating Curve:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CBFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 742792604。
0878324422;中文规格书,Datasheet资料
This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:87832-4422Status:ActiveOverview:Milli-Grid™ Connector SystemDescription:2.00mm Pitch Milli-Grid™ Header, Surface Mount, Vertical, Shrouded, Lead-Free, 44Circuits, 0.38µm Gold (Au) Plating, Pick-and-Place Cap, with Locking Windows and Center Polarization Slot, PCB Locator, TubeDocuments:3D ModelProduct Specification PS-87831-027 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Headers Series87832Application Signal, Wire-to-BoardComments With Cap|Contact Molex for application in automotive industryOverviewMilli-Grid™ Connector System Product Name Milli-Grid™UPC822348352340PhysicalBreakawayNo Circuits (Loaded)44Circuits (maximum)44Color - ResinBlack Durability (mating cycles max)100First Mate / Last Break No Flammability94V-0Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part Yes Lock to Mating Part YesMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination Tin Material - Resin Nylon Net Weight2.105/g Number of Rows 2Orientation Vertical PCB Locator No PCB Retention None Packaging TypeTube Pitch - Mating Interface2.00mm Pitch - Termination Interface 2.00mm Plating min - Mating0.381µm Plating min - Termination 1.905µm Polarized to PCB No Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating-55°C to +105°CSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 87832SeriesMates With50394 Wire-to-Board Terminals, 51110Wire-to-Board Crimp Housing, 87568 Wire-to-Board IDT Housings, 79107 Board-to-Board Top Entry Through Hole Receptacle,79108 Board-to-Board FFC/FPC Top Entry Through Hole Receptacle, LTermination Interface: Style Through Hole and Surface MountElectricalCurrent - Maximum per Contact2AVoltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)10Lead-free Process Capability Reflow Capable (SMT only)Max. Cycles at Max. Process Temperature1Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-87831-027Sales Drawing SD-87832-006This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0878324422。
0440670802;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44067-0802Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0™ Wire-to-Board Header, Dual Row, Vertical for up to 3.56mm Thick PCB, 8 Circuits, 0.38µm Gold (Au) Selective PlatingDocuments:3D ModelTest Summary TS-43045-002 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-43045 (PDF)GeneralProduct Family PCB Headers Series44067Application Power, Wire-to-BoardComments High Temperature, Polarization Key to PCB OverviewMicro-Fit 3.0™ Connectors Product Name Micro-Fit 3.0™UPC800753925571PhysicalBreakawayNo Circuits (Loaded)8Circuits (maximum)8Color - ResinBlack Durability (mating cycles max)30First Mate / Last Break No Glow-Wire Compliant No Guide to Mating Part No Keying to Mating Part None Lock to Mating PartYes Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin High Temperature Thermoplastic Net Weight1.241/g Number of Rows 2Orientation Vertical PC Tail Length 4.01mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 3.60mm Packaging TypeTray Pitch - Mating Interface3.00mm Pitch - Termination Interface 3.00mm Plating min - Mating0.381µm Plating min - Termination 2.540µm Polarized to PCB Yes Shrouded Fully StackableNo Surface Mount Compatible (SMC)YesTemperature Range - Operating -40°C to +105°CTermination Interface: StyleThrough Hole - Kinked Pin ElectricalCurrent - Maximum per Contact 5A Voltage - Maximum250VSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44067SeriesMates With43025 Micro-Fit™ HeaderSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature3Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-43045Sales Drawing SD-44067-001Test Summary TS-43045-002This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0440670802。
0442060002;中文规格书,Datasheet资料
This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:44206-0002Status:ActiveOverview:Mini-Fit Jr.™Description:4.20mm Pitch Mini-Fit Jr.™ Header, Dual Row, Vertical, with 11.90mm Locking Ramp,24 Circuits, without Snap-in Plastic PegsDocuments:3D ModelRoHS Certificate of Compliance (PDF)Drawing (PDF)Agency CertificationULE29179GeneralProduct Family PCB Headers Series44206Application Power, Wire-to-BoardCommentsCurrent = 13A max. per circuit when header is mated to a receptacle loaded with 45750 Mini-Fit® Plus HCS Crimp Terminal Crimped to 16 AWG wire., See Molex product specification PS-45750-001 for additional current de-rating information.OverviewMini-Fit Jr.™Product Name Mini-Fit Jr.™UPC822350009577PhysicalBreakawayNo Circuits (Loaded)24Circuits (maximum)24Color - ResinNatural Durability (mating cycles max)30First Mate / Last Break No Flammability94V-2Glow-Wire Compliant No Guide to Mating Part Yes Keying to Mating Part Yes Lock to Mating Part Yes Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight5.010/g Number of Rows 2Orientation Vertical PC Tail Length 3.30mm PCB Locator Yes PCB RetentionYes PCB Thickness - Recommended 1.80mm Packaging TypeTray Pitch - Mating Interface 4.20mm Plating min - Mating0.889µm Plating min - Termination 0.889µm Polarized to PCB Yes Shrouded Fully StackableNoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 44206SeriesMates With5557 Mini-Fit Jr.™ Receptacle HousingSurface Mount Compatible (SMC)NoTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact13AVoltage - Maximum600VMaterial InfoReference - Drawing NumbersSales Drawing SDA-44206-001This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0442060002。
0424109082;中文规格书,Datasheet资料
This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42410-9082Status:ActiveOverview:Modular Plugs - Jacks Description:Modular Jack, Vertical, 8/4Documents:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42410 (PDF)GeneralProduct Family Modular Jacks/Plugs Series42410CommentsFlush Mount|Flangeless|2 PCB Thick Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753820838PhysicalColor - ResinBlack Durability (mating cycles max)500Inverted / Top Latch N/AJack Height16.38mm Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB RetentionYes PCB Thickness - Recommended 3.20mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts8/4Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +80°C Termination Interface: Style Through Hole Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact 1.5A ShieldedNo Voltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process CapabilityWave Capable (TH only)Max. Cycles at Max. Process Temperature 1Process Temperature max. C235Material InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42410Series Mates With FCC 68 PlugsReference - Drawing NumbersProduct Specification PS-42410Test Summary TS-42878-001This document was generated on 08/30/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0424109082。
02560442-000;中文规格书,Datasheet资料
HCD Series– Hermetically Sealed DC LVDT∙ Hermetically sealed, all welded ∙ Stainless steel housing ∙ High level ±10VDC output∙ Stroke ranges from ±0.05 to ±10 inches ∙ Shock and vibration tolerant ∙ MS style connector∙ IEC IP68 rating to 1,000 PSI [70 bars] ∙Captive core optionDESCRIPTIONThe HCD Series hermetically sealed DC operated LVDTs are the perfect choice for high performance measurements in environments containing moisture, dirt, and fluid contaminants. Operating on a nominal ±15VDC supply, these heavy-duty LVDTs deliver an extremely linear, low noise, yet high frequency response ±10VDC output.The integral electrical connector (welded, glass-sealed MS type) provides for easy installation and allows replacing a damaged cable without sacrificing the sensor.The HCD is available in stroke ranges of ±0.05 inch [±1.27mm] up to ±10 inches [±254mm], and with a number of standard options including imperial or metric threaded core, guided core and captive core.Like in most of our LVDTs, the HCD windings are vacuum impregnated with a specially formulated, high temperature, flexible resin, and the coil assembly is potted inside its housing with a two-component epoxy. This provides excellent protection against hostile environments such as high humidity, vibration and shock.Captive core option: The HCD features an optional captive core design (available for most models) that greatly simplifies installation. The core rod and bearing assembly includes a Bronze bearing on the front end for self-alignment, while a PTFE sleeve allows low-friction travel through the stainless steel boreliner (spool tube). The core rod and the bearing assembly are both field serviceable.Also see our other LVDT models with built-in signal conditioning: DC-EC (±DC voltage), DC-SE (single-ended DC voltage), HC-485 (RS485 Digital Series) and the HCT-IS (Intrinsically safe, 4-20mA, 2-wire loop).Measurement Specialties, Inc. (NASDAQ MEAS) offers many other types of sensors and signal conditioners. Data sheets can be downloaded from our web site at: /datasheets.aspxMEAS acquired Schaevitz Sensors and the Schaevitz ®trademark in 2000.FEATURESAPPLICATIONS∙ All-welded stainless steel construction ∙ Harsh industrial environments∙ Shock and vibration tolerant ∙ Pressurized installations up to 1,000 psi ∙ Low noise, ±10VDC output ∙ Paper processing mills∙ Double magnetic shielding∙ Roller gap position feedback ∙ MS type connector (MIL-C-5015)∙Automated test systems∙Calibration certificate supplied with each unit ∙X-Y Positional FeedbackPERFORMANCE SPECIFICATIONSNotes:All values are nominal unless otherwise notedDimensions are in inch [mm] unless otherwise notedFR: Full Range is the stroke range, end to end; FR=2xS for ±S stroke rangeFSO (Full Scale Output): Largest absolute value of the outputs measured at the ends of the range WIRING INFORMATIONA through F: Connector pin assignmentsMECHANICAL SPECIFICATIONS – NON CAPTIVE CORE (STANDARD)MECHANICAL SPECIFICATIONS – CAPTIVE CORE OPTIONDimensions are in inch [mm]ORDERING INFORMATIONNote: Add multiple option dash numbers together to determine proper ordering suffixExample: HCD 1000, ±1 inch, with captive core and metric threaded connecting rod, P/N 02560444-206Refe r to our “ Accessories for LVDTs” data sheet for our LVDT signal conditioning instrumentation and other accessories. TECHNICAL CONTACT INFORMATIONThe information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters mus t be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.分销商库存信息: MEASUREMENT-SPECIALTIES 02560442-000。
7440700022;中文规格书,Datasheet资料
description :33% Umgebungstemperatur / temperature:+20°CFerrit/ ferrite ME 09-04-21ME 08-11-26ME08-04-14ME 08-02-14NameDatum / dateÄnderung / modificationVersion 1Version 2Version 3Version 4Betriebstemp. / operating temperature: -40°C - +125°C Basismaterial / base material:Draht / wire:Class H Luftfeuchtigkeit / humidity:F Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:Freigabe erteilt / general release:Kunde / customer...........................................................................................E Testbedingungen / test conditions:Metra Hit 27I für/for R DC;Agilent N5776A für/for I DC;WAYNE KERR 3260B für/for L 0; I SAT D Prüfgeräte / test equipment:It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Würth Elektronik..................................................................................http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Endoberfläche / finishing electrode:Ag/Ni/SnUmgebungstemp. / ambient temperature: -40°C - +85°C POWER-CHOKE WE-TPCdescription :ME 09-04-21ME 08-11-26ME08-04-14ME 08-02-14NameDatum / dateVersion 1Version 4Version 2Version 3POWER-CHOKE WE-TPCDATUM / DATE : 2009-04-21H Induktivitätskurve / Inductance curve:Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik...........................................................................................Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationhttp://www.we-online.dedescription :I Rollenspezifikation / tape and reel specification:A 4,00± 0,1mmB 12,00± 0,1mmC 16,0± 0,2mma 178,0± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mmd 50,00± 1,0mmME 09-04-21ME 08-11-26ME08-04-14ME 08-02-14NameDatum / dateÄnderung / modificationVersion 1Version 2Version 3Version 4POWER-CHOKE WE-TPCDATUM / DATE : 2009-04-21http://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Gurtspezifikation / Tape specification:Rollenspezifikation / Reel specification:Unterschrift / signatureWürth Elektronik eiSos GmbH & Co. KGEnd Startfeeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7440700022。
0424108792;中文规格书,Datasheet资料
This document was generated on 08/31/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42410-8792Status:ActiveOverview:Modular Plugs - JacksDescription:Modular Jack, Vertical, 8/6, Panel StopsDocuments:3D ModelTest Summary TS-42878-001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-42410 (PDF)GeneralProduct Family Modular Jacks/Plugs Series42410CommentsFlush Mount|Flangeless|2 PCB Thick Component Type PCB Jack Magnetic NoOverviewModular Plugs - Jacks Performance Category 3Power over Ethernet (PoE)N/A Product Name RJ45UPC800753819528PhysicalColor - ResinBlack Durability (mating cycles max)500Inverted / Top Latch N/AJack Height16.38mm Lightpipes/LEDs NoneMaterial - MetalPhosphor Bronze Material - Plating MatingGold Material - Plating Termination TinMaterial - Resin PolyesterOrientation Vertical (Top Entry)PCB RetentionYes PCB Thickness - Recommended 3.20mm Packaging TypeTray Pitch - Mating Interface1.02mm Pitch - Termination Interface 1.27mm Ports1Positions / Loaded Contacts8/6Surface Mount Compatible (SMC)NoTemperature Range - Operating -40°C to +80°C Termination Interface: Style Through Hole Wire/Cable TypeN/A ElectricalCurrent - Maximum per Contact 1.5A ShieldedNo Voltage - Maximum125VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process CapabilityWave Capable (TH only)Max. Cycles at Max. Process Temperature 1Process Temperature max. C235Material InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42410Series Mates With FCC 68 PlugsReference - Drawing NumbersProduct Specification PS-42410Test Summary TS-42878-001This document was generated on 08/31/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0424108792。
742792651;中文规格书,Datasheet资料
5.1 5.0 4.02012-06-262012-03-292005-12-16SStSStSStSStSMu-Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:Test Equipment: E4991A or equivalentF Derating Curve:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CBFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 742792651。
0422260422;中文规格书,Datasheet资料
This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:42226-0422Status:ActiveOverview:KK® Interconnection SystemDescription:2.54mm Pitch KK® Header, Breakaway, Right Angle, with Plastic Polarizing Peg, 2Circuits, Tin (Sn) PlatingDocuments:3D ModelProduct Specification PS-10-07 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Headers Series42226ApplicationSignal, Wire-to-Board Application Tooling Part Link 011201230OverviewKK® Interconnection System Product Name KK®UPC883906465612PhysicalBreakawayYes Circuits (Loaded)2Circuits (maximum)2Color - ResinBlack Durability (mating cycles max)25Flammability94V-0Glow-Wire Compliant No Lock to Mating Part None Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight0.270/g Number of Rows 1Orientation Right Angle PC Tail Length 3.05mm PCB Locator No PCB RetentionNone PCB Thickness - Recommended 1.60mm Packaging TypeBag Pitch - Mating Interface 2.54mm Plating min - Mating2.540µm Plating min - Termination 2.540µm Polarized to Mating Part No Polarized to PCB No Shrouded No StackableNoTemperature Range - Operating 0°C to +75°C Termination Interface: StyleThrough Hole ElectricalCurrent - Maximum per Contact4ASeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 42226SeriesMates With2139 KK® Crimp Housing, 41695 KK®Crimp Housing, 6442 KK® Crimp Housing,2145 PCB Connector, 41815 PCB Connector, 3069 KK® Crimp HousingVoltage - Maximum250VSolder Process DataDuration at Max. Process Temperature (seconds)5Lead-free Process Capability Wave Capable (TH only)Max. Cycles at Max. Process Temperature1Process Temperature max. C235Material InfoOld Part Number A-42226-0422Reference - Drawing NumbersProduct Specification PS-10-07Sales Drawing SD-42226-001This document was generated on 08/16/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0422260422。
7427927140;中文规格书,Datasheet资料
2.1 2.0 1.02012-06-262012-03-292009-07-27SStSStSMuSStSMuWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:Test Equipment: E4991A or equivalentF Derating Curve:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-CBFof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the component surface has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the ferrite body and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the ferrite body and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the plating. The washing varnish agent could have a negative effect on the long term function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the ferrite body could flake or in the worst case it could break.Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be sustai-ned.• Wave soldering is only allowed after evaluation and approval.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 7427927140。
0874270412;中文规格书,Datasheet资料
This document was generated on 08/21/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:87427-0412Status:ActiveOverview:Mini-Fit Jr.™Description:4.20mm Mini-Fit Jr.™ Header, Right Angle, with Flange, 4 Circuits, Tin (Sn) over Nickel (Ni) PlatingDocuments:3D ModelProduct Specification PS-87427-0001 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family PCB Headers Series87427Application Power, Wire-to-BoardCommentsCurrent = 13A max. per circuit when header is mated to a receptacle loaded with 45750 Mini-Fit® Plus HCS Crimp Terminal Crimped to 16 AWG wire., See Molex product specification PS-45750-001 for additional current de-rating information.OverviewMini-Fit Jr.™Product Name Mini-Fit Jr.™UPC800753301542PhysicalBreakawayNo Circuits (Loaded)4Circuits (maximum)4Color - ResinBeige Durability (mating cycles max)30First Mate / Last Break No Flammability94V-0Glow-Wire Compliant No Lock to Mating Part Yes Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight3.184/g Number of Rows 2Orientation Right Angle PC Tail Length 3.30mm PCB Locator No PCB RetentionNone PCB Thickness - Recommended 1.60mm Packaging TypeTray Pitch - Mating Interface4.20mm Pitch - Termination Interface 4.20mm Plating min - Mating2.540µm Plating min - Termination 2.540µm Polarized to Mating Part Yes Polarized to PCB No ShroudedFullySeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 87427SeriesMates With5557 Mini-Fit Jr.™ Receptacle HousingStackable NoSurface Mount Compatible (SMC)NoTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact13AVoltage - Maximum600VSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature2Process Temperature max. C240Material InfoReference - Drawing NumbersProduct Specification PS-87427-0001Sales Drawing SD-87427-**1*This document was generated on 08/21/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0874270412。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
description :size A mm B mm C mm D mm EmmEigenschaften / properties Wert / valueEinheit / unittol.Induktivität /inductanceDC-Widerstand /DC-resistance DC-Widerstand /DC-resistance Nennstrom /rated Current Sättigungsstrom /saturation current Eigenres.-Frequenz /self-res.-fequency33% Umgebungstemperatur / temperature:+20°CFerrit/ ferrite ME 10-10-01ME 08-04-01ME 07-07-01NameDatum / date2811Änderung / modificationVersion 1Version 2Version 3Betriebstemp. / operating temperature: -40°C - + 125°C 2,8 ± 0,2Basismaterial / base material:Draht / wire:Class H /180°C Luftfeuchtigkeit / humidity:F Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:E Testbedingungen / test conditions:Metra HIT 27I für/for R DCFreigabe erteilt / general release:Kunde / customer...........................................................................................2,8 ± 0,21,0typ.1,3A 0,9 typ.0,9 typ.1,1 ± 0,10HP 34401 A & Fluke 54II für/for I DC; WAYNE KERR 3260B für/for L 0; I SAT D Prüfgeräte / test equipment:It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions.Würth Elektronik..................................................................................http://www.we-online.deDatum / date..................................................................................Unterschrift / signatureKontrolliert / approvedD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked DATUM / DATE : 2010-10-01max.Testbedingungen / test conditions 155±30%Endoberfläche / finishing electrode:Ag/Ni/SnC Lötpad / soldering spec.:B Elektrische Eigenschaften / electrical properties:Umgebungstemp. / ambient temperature: -40°C - + 85°C 100POWER-CHOKE WE-TPCµH R DC max.Lo A Mechanische Abmessungen / dimensions:100 kHz / 10mAR DC typ.1252,2@ 20°C ∆L/L = < 35%typ.I N m Ω@ 20°C m Ωtyp.SRFMHz∆T = 40 K typ.I sat A ABCxxxxDDE [mm]1,01,23,21,0description :ME 10-10-01ME 08-04-01ME 07-07-01NameDatum / dateVersion 2Version 3....................................................................................................................................................................POWER-CHOKE WE-TPCDATUM / DATE : 2010-10-01H Induktivitätskurve / Inductance curve:Datum / dateUnterschrift / signature Würth ElektronikFreigabe erteilt / general release:Kunde / customerD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationhttp://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedVersion 10,000,501,001,502,002,500,000,200,400,600,801,001,20L (µH )Current (A)Induktivität vs Strom (typ.)/ Inductance vs Current (typ.)description :I Rollenspezifikation / tape and reel specification:A 4,00± 0,1mmB 8,00± 0,1mmC 12,0± 0,2mma 178,0± 2,0mmb 21,00± 0,8mmc 13,00± 0,5mmd 50,00± 1,0mmME 10-10-01ME 08-04-01ME 07-07-01NameDatum / datehttp://www.we-online.de...........................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateWürth ElektronikD-74638 Waldenburg · Max-Eyth-Strasse 1 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Änderung / modificationVersion 1Version 2Version 3Gurtspezifikation / Tape specification:Rollenspezifikation / Reel specification:Unterschrift / signature POWER-CHOKE WE-TPCDATUM / DATE : 2010-10-01ABCØ cadbno component / 160 mm min.componentsno components / 400 mm min.End Startfeeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.XXX XXX分销商库存信息: WURTH-ELECTRONICS 744028002。