木蜡油配方（Woodwaxoilformula）

木蜡油配方（Wood wax oil formula）
Wood wax oil formula
Searching for a strong man on the Internet, his formula is like this:
"A bottle of turpentine 14 yuan 1 pounds can sell oil paint or chemical store to buy common white candles, considering the beeswax bad to buy 8 yuan 1 pounds: tung oil: oil paint, color by: first bowl to half a bowl of turpentine to Baicheng small candle into a short turpentine root half the candle will bowl in the water pot on the stove heating candles will soon be integrated into the turpentine completely dissolved into the oil a little stir is completely cooled paste wipe with a cloth without liquid wax prior to the tung oil pigment into the turpentine colored oil wood surface must be used more than 300 sandpaper smooth then rub the wax again can feel than to buy the wood wax oil to lubricate"
The modeled on after a period of time, tracking, he posted that wood wax effect after half a year is not good, very sticky, also called gray.
So I tried again.
Finally, the following ingredients are identified: tung oil, castor oil, insect film, palm wax, beeswax, and Taobao
Talking about the function of tung oil, needless to say, the basic raw material of wood wax oil. Beeswax is used to seal the moisture in the wood; the shellac is increasing what do not know;
palm wax is hard wax, and it can increase the anti knock wood surface anti sliding ability; castor oil is used to melt the wax palm.
Say it and do all the ingredients.
From left to right, they were shellac, palm wax, tung oil, castor oil, beeswax, too big to take on so much, so they didn't show up.
Process:
First, heat the wax through water until the wax melts slowly. Pour the tung oil into the wax and pour it over while stirring.
Two, palm wax into castor oil, water heating, stirring, until the palm wax melted, palm wax in the castor oil into the tung oil in the side, while the edge of stirring.
Three melt the insect film with alcohol and pour it into the mixture just now.
If it is too thick, add castor oil to dilute it. Until the concentration diluted to Europe or the like Shimu keygen can.
Formula for wood wax oil
Wood wax oil is a kind of wooden coating based on natural vegetable oil and vegetable wax. It plays a role in protecting and enhancing natural texture of wood. Wood can also be dyed.
Wood wax oil is based on natural vegetable oil and wax
The Brazil palm wax
The sunflower oil
The candelilla wax
The linseed oil
The soybean oil
The thistle oil
(excluding benzene, mercury, lead)! All organic pigments are food grade! All additives meet the European Pharmacopoeia purity standards! Security
Is the highest, in the brush in the human, animal, plant without any damage, suitable for children's toys!
The action of wood wax oil and wax
The oil penetrate into the wood, to prevent foreign water and stains on wood nourishment
The wax: combined with wood fiber, enhance the surface hardness of wood
The ZHUBANGP is a perfect combination of wood wax oil and wax
Support (1) against (0) | replies zobang were published in the 2009-07-18 1 floor wood wax re: wood wax formula
Wood is a living material, with natural advantages, wood durable, constant temperature, and humidity can be adjusted. Wooden products can create a natural environment and atmosphere, comfortable and healthy home.
Wood can pass the test of time from generation to generation, in order to maintain its natural advantages for a long time, and extend the service life, the timber must be properly handled and properly maintained. ZBP wood wax can be applied to different kinds of wood, and give them a unique look, but will not affect the properties of the wood itself.
1. Substrate treatment
Tofo requirements: wood moisture content of not more than 20%
Grinding: use 150 to 220 abrasive paper to smooth the wood to a smooth surface
Presizing: to use transparent or the same color to repair putty nailhole, flat knot holes
Cleaning: make the surface clean, dry, without grease and dust before brushing
2, operation instructions
Stir: mix thoroughly after opening.
Brushing: cotton cloth, hard brush, roller and other tools will paint evenly along the direction of wood texture painting, slightly dry, clean surfaces such as cotton cloth with uneven coating to make the surface smooth, painted wood.
The wood surface is painted in place without leaving any dead ends;
If you need gloss, 6 hours after the table dry, you can use 100 cloth polishing, so as to achieve the effect of light
Operation method
Direct brushing, without bottoming, without dilution, stirring evenly, brushing one to two times.
3. Drying time
Keep the paint surface well ventilated, dry 4 - 6 hours, work 20 - 24 hours.
4, maintenance, renovation
Maintenance: clean old wood surface to dry, no grease, dust, re coating new paint
Renovation: if the wood surface was previously used wood wax just dust, clean the surface of wood, can be directly brushing again; if the wood surface used is the traditional paint, first with the renovation agent or polishing methods such as the old
wood surface return to wood surface effect, the construction according to the requirements of the above steps.
5, matters needing attention
Wood wax shall not be used in combination with other paints or paints
Before coating, polish the surface to smooth, clean and without dust
Pay attention to product storage。