国际贸易合同中英文对照版

合集下载

国际贸易合同协议书中英文对照

国际贸易合同协议书中英文对照International Trade Contract Agreement国际贸易合同协议书中英文对照1. Parties to the Agreement1.1 Seller: [Full Name or Company Name]Address: [Address]Contact Person: [Name]Telephone: [Phone Number]Email: [Email Address]1.2 Buyer: [Full Name or Company Name]Address: [Address]Contact Person: [Name]Telephone: [Phone Number]Email: [Email Address]2. Description of Goods2.1 The Seller agrees to sell and deliver the following goods: - Product: [Name of the Product]- Quantity: [Number of Units]- Specifications: [Detailed Specifications]- Packaging: [Packaging Details]- Delivery Terms: [Shipping Terms]2.2 The Buyer agrees to purchase the goods specified in section 2.1.3. Price and Payment3.1 The total price of the goods is [Total Price] and shall be paid as follows:- [Payment Method]- [Payment Terms]- [Currency]3.2 Payment shall be made by the Buyer on or before the specified due dates.4. Delivery4.1 The Seller shall deliver the goods to the Buyer as per the agreed delivery terms mentioned in section 2.1.4.2 The Seller shall ensure that the goods are properly packed and labeled for safe transportation.4.3 The risk of loss or damage to the goods shall be transferred from the Seller to the Buyer upon delivery.5. Inspection and Acceptance5.1 The Buyer shall have the right to inspect and test the goods upon receipt.5.2 If the goods do not conform to the specifications mentioned in section 2.1, the Buyer may reject the goods within a reasonable period and notify the Seller in writing.5.3 If the goods are rejected by the Buyer, the Seller shall be responsible for arranging the return or replacement of the non-conforming goods at their own expense.6. Governing Law and Dispute Resolution6.1 This agreement shall be governed by and construed in accordance with the laws of [Jurisdiction].6.2 Any disputes arising out of or in connection with this agreement shall be resolved through amicable negotiations between the parties.6.3 If the parties fail to reach a resolution through negotiations, any unresolved disputes shall be submitted to arbitration in accordance with the rules of [Arbitration Institution].7. Confidentiality7.1 The parties agree to keep all information related to this agreement confidential and shall not disclose it to any third party without prior written consent.8. Entire Agreement8.1 This agreement constitutes the entire understanding between the parties and supersedes all prior agreements, understandings, or representations, whether oral or written.8.2 Any amendments or modifications to this agreement must be made in writing and signed by both parties.8.3 This agreement may be executed in counterparts, each of which shall be deemed an original but all of which together shall constitute one and the same instrument.以上所述即为国际贸易合同协议书中英文对照内容，双方应当确保协议内容得到准确理解，并遵守其中的条款和规定。

外贸合同中英文4篇

外贸合同中英文4篇篇1International Trade ContractContractual agreements are vital in the field of international trade as they establish the terms and conditions between parties involved. These agreements or contracts must be clear, precise, and adhere to the laws governing international trade. This document aims to explore the key elements of an international trade contract and provide an example of such a contract in both English and Chinese.Key Elements of an International Trade Contract1. Parties involved: The contract must clearly identify the parties involved in the transaction, including their names, addresses, and contact information.2. Contract terms: The terms of the agreement must be clearly outlined, including the scope of work, delivery dates, payment terms, and any other relevant details.3. Pricing: The contract should specify the pricing of the goods or services being traded, including any applicable taxes, duties, or fees.4. Terms of payment: The payment terms, including the method of payment, currency, and timing of payments, must be agreed upon by both parties.5. Delivery terms: The contract should outline the delivery terms, including the shipping method, responsibilities of each party, and any applicable Incoterms.6. Dispute resolution: The contract should include provisions for resolving disputes that may arise during the course of the transaction, including arbitration or mediation clauses.Example of an International Trade ContractBelow is an example of an international trade contract between a Chinese supplier and an American importer:International Trade ContractThis agreement is made on [date] between [Chinese supplier], located at [address], hereinafter referred to as the "Supplier", and [American importer], located at [address], hereinafter referred to as the "Importer".1. Scope of work: The Supplier agrees to provide [description of goods or services] to the Importer in accordance with the specifications outlined in Exhibit A attached hereto.2. Delivery dates: The Supplier shall deliver the goods to the Importer by [delivery date]. Any delays in delivery must be communicated to the Importer in writing.3. Pricing: The pricing of the goods shall be [price] per unit, excluding any applicable taxes, duties, or fees.4. Payment terms: The Importer agrees to pay the Supplier [payment terms], with 50% due upon signing of this agreement and the remaining 50% due upon delivery of the goods.5. Delivery terms: The goods shall be delivered using [shipping method], with the Supplier responsible for packaging and loading the goods onto the carrier.6. Dispute resolution: Any disputes arising from this agreement shall be resolved through arbitration in accordance with the laws of [jurisdiction].This agreement constitutes the entire agreement between the parties and supersedes any prior agreements or understandings. This contract shall be governed by the laws of [jurisdiction].Signed:Supplier: __________________________Date: ________________________Importer: _________________________Date: ________________________In conclusion, international trade contracts play a crucial role in facilitating trade between parties from different countries. By clearly outlining the terms and conditions of the agreement, these contracts help to mitigate risks and ensure a smooth transaction process. It is important for parties involved in international trade to carefully review and negotiate the terms of the contract to protect their interests and avoid any potential disputes.篇2Foreign Trade ContractContract No.: ABC2021001Party A: Seller: ABC Trading CompanyParty B: Buyer: XYZ International Trading Co., Ltd.Date: January 1, 20211. Product Description:1.1 Party A agrees to sell and deliver to Party B the following products:Product: Electrical appliancesQuantity: 1000 unitsUnit Price: USD 50 per unitTotal Price: USD 50,0001.2 The specifications and quality of the products shall be in accordance with the samples provided by Party A and approved by Party B.2. Payment Terms:2.1 Party B shall make a 30% deposit of the total contract value (USD 15,000) upon signing this contract.2.2 The remaining 70% (USD 35,000) shall be paid by Party B upon completion of production and before shipment of the products.3. Delivery:3.1 The products shall be delivered to Party B's designated warehouse within 30 days upon receipt of the deposit.3.2 The delivery shall be made by sea freight to the port of destination specified by Party B.4. Packing and Shipping:4.1 The products shall be packed in accordance with standard export packaging.4.2 Party A shall be responsible for arranging and paying for the transportation of the products to the port of destination.5. Inspection and Acceptance:5.1 Party B shall have the right to inspect the products upon arrival at the port of destination. Any non-conformities or damages shall be reported to Party A within 3 days of receipt.5.2 Party A shall be liable for replacing or repairing any defective products found during the inspection.6. Force Majeure:6.1 If either party is prevented from fulfilling its obligations under this contract due to force majeure events such as natural disasters, government actions, or wars, the affected party shall not be held liable for any delays or failures in performance.7. Governing Law and Dispute Resolution:7.1 This contract shall be governed by and construed in accordance with the laws of the People's Republic of China.7.2 Any disputes arising from this contract shall be settled through friendly negotiation. If no agreement can be reached, the dispute shall be submitted to the China International Economic and Trade Arbitration Commission for arbitration.This contract is made and entered into by the authorized representatives of both parties on the date first written above.ABC Trading Company XYZ International Trading Co., Ltd.___________________________________________________(Signed)(Signed)John SmithJane DoeTitle: Sales ManagerTitle: Purchasing Manager(Date)(Date)篇3International trade plays a crucial role in the global economy, with billions of dollars worth of goods and services exchanged between countries every day. One of the key components of international trade is the foreign trade contract, which outlines the terms and conditions of the transaction between the buyer and the seller. These contracts are typically written in both English and the language of the country where the transaction is taking place, to ensure clarity and avoid misunderstandings.A foreign trade contract serves as the legal framework for the transaction and provides a record of the agreements made between the parties. It typically includes details such as the names and addresses of the buyer and seller, a description of the goods or services being traded, the price, payment terms, delivery terms, and any other relevant information. The contract may also include provisions for dispute resolution, warranties, and the governing law of the contract.When drafting a foreign trade contract, it is important to pay close attention to the language used and ensure that all terms are clearly defined and understood by both parties. Ambiguities or misunderstandings in the contract language can lead to disputes and legal issues down the line. In addition, it isimportant to include clauses that protect the interests of both parties, such as force majeure clauses in case of unforeseen events that prevent the fulfillment of the contract.Here is an example of a foreign trade contract in English:Foreign Trade ContractThis agreement is made on [date] between [Buyer's Name and Address] (hereinafter referred to as "Buyer") and [Seller's Name and Address] (hereinafter referred to as "Seller") for the sale and purchase of [Description of Goods/Services] on the following terms and conditions:1. Description of Goods/Services: Seller agrees to sell and Buyer agrees to purchase [Description of Goods/Services] in the quantity of [quantity] at the price of [price].2. Payment Terms: Buyer agrees to pay Seller the total amount of [total amount] in [currency] within [number] days of receiving the goods/services.3. Delivery Terms: Seller agrees to deliver the goods/services to Buyer's address at [address] within [number] days of receiving payment.4. Governing Law: This contract shall be governed by the laws of [country].5. Dispute Resolution: Any disputes arising from this contract shall be resolved through arbitration in [city].This contract is hereby signed by both parties on the date mentioned above.Buyer's Signature: _____________________Seller's Signature: _____________________In conclusion, foreign trade contracts play a vital role in international trade, providing a legal framework for transactions and ensuring clarity and understanding between parties. By drafting contracts in both English and the language of the country where the transaction is taking place, parties can reduce the risk of misunderstandings and disputes and conduct business with confidence.篇4International trade is an essential part of the global economy, with countless transactions taking place between companies and businesses from different countries every day. One crucial aspect of international trade is the negotiation and signing of trade contracts, also known as foreign trade contracts.Foreign trade contracts are legal agreements between two or more parties from different countries, specifying the terms and conditions under which goods or services will be exchanged. These contracts help to establish clear expectations and responsibilities for each party, as well as providing legal protection in case of disputes or disagreements.When drafting a foreign trade contract, it is vital to ensure that all terms and conditions are clearly defined and agreed upon by all parties involved. This includes details such as the names and addresses of the parties, the description of the goods or services being traded, the price and payment terms, delivery schedule, quality standards, and any other relevant terms specific to the transaction.In addition to being comprehensive and detailed, foreign trade contracts must also be written in both the native language of the parties involved and in English, as English is widely used as the international language of business. This helps to avoid any misunderstandings or misinterpretations due to language barriers and ensures that all parties have a clear understanding of the terms and conditions of the contract.Here is an example of a foreign trade contract in both Chinese and English:**外贸合同****合同编号：XXXXXX****签署日期：YYYY年MM月DD日****甲方：****地址：XXXXXXXXXXXXXX****联系人：XXXXXXXX****电话：XXXXXXXXX****乙方：****地址：XXXXXXXXXXXXXX****联系人：XXXXXXXX****电话：XXXXXXXXX****一、合同标的****1.1 甲方以XXXXXXXXXX为合同标的向乙方出售XXXXXXXX。

国际贸易合同中英文对照

国际贸易合同中英文对照国际贸易合同中英文对照第一章合同背景和定义1.1 合同背景（Contract Background）1.2 定义（Definitions）第二章合同目的与范围2.1 合同目的（Purpose of the Contract）2.2 合同范围（Scope of the Contract）第三章合同双方3.1 甲方（Party A）3.2 乙方（Party B）第四章合同条款4.1 产品描述（Product Description）4.2 数量与价格（Quantity and Price）4.3 付款方式与条款（Payment Terms and Conditions）4.4 交货方式与条款（Delivery Terms and Conditions）4.5 质量保证与检验（Quality Assurance and Inspection）4.6 违约责任与索赔（Breach of Contract and Clms）第五章知识产权5.1 权利与义务（Rights and Obligations）5.2 保密条款（Confidentiality Clause）第六章争议解决6.1 可撤销的争议解决方式（Revocable Dispute Resolution Methods）6.2 仲裁（Arbitration）第七章其他条款7.1 合同变更与解释（Contract Amendment and Interpretation）7.2 不可抗力（Force Majeure）7.3 适用法律与管辖权（Applicable Law and Jurisdiction）附件：________1.合同附件A：________产品规格2.合同附件B：________付款明细表3.合同附件C：________交货时间表法律名词及注释：________1.合同（Contract）：________双方达成的具有法律效力的协议。

对外贸易合同范本中英文对照3篇

对外贸易合同范本中英文对照3篇篇1International Trade Contract TemplateThis International Trade Contract ("Contract") is made and entered into the ____ day of ____, 20__, by and between:Seller: [Seller's Name]Address: [Seller's Address]Phone Number: [Seller's Phone Number]Email: [Seller's Email Address]Buyer: [Buyer's Name]Address: [Buyer's Address]Phone Number: [Buyer's Phone Number]Email: [Buyer's Email Address]WHEREAS, Seller is engaged in the business of selling [Description of Goods or Services] and Buyer desires to purchase the same;NOW, THEREFORE, in consideration of the mutual covenants and promises contained herein, the parties hereto agree as follows:1. Description of Goods/Services:Seller agrees to sell and Buyer agrees to purchase the following goods/services: [Detailed Description ofGoods/Services].2. Price:The total purchase price for the goods/services shall be [Total Amount in Currency], payable as follows: [Payment Schedule].3. Delivery:The goods/services shall be delivered to the following address: [Delivery Address]. Delivery shall be made on or before [Delivery Date].4. Inspection and Acceptance:Buyer shall have [Number of Days] days from the date of delivery to inspect the goods/services and notify Seller in writing of any non-conformities. Failure to notify Seller within this time period shall constitute acceptance of the goods/services.5. Warranty:Seller warrants that the goods/services shall be free from defects in materials and workmanship for a period of [Warranty Period] from the date of delivery.6. Governing Law:This Contract shall be governed by and construed in accordance with the laws of [Governing Law Jurisdiction].IN WITNESS WHEREOF, the parties have caused this Contract to be executed by their duly authorized representatives as of the date first written above.Seller: __________________Buyer: __________________This Contract contains the entire agreement between the parties and supersedes any prior agreements or understandings, verbal or written. This Contract may be amended only by a written agreement signed by both parties.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first written above.Seller: [Seller's Signature] Date:Buyer: [Buyer's Signature] Date:I have read and understood the terms and conditions of this Contract and hereby agree to be bound by them._____________________(Signed by a witness)篇2International Trade Contract SampleContract for the Sale of GoodsThis Contract for the Sale of Goods ("Contract") is made and entered into as of [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business located at [Address], and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business located at [Address].1. Sale of Goods. Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase from Seller, the goods described in Exhibit A attached hereto (the "Goods") in accordance with the terms and conditions set forth in this Contract.2. Price. The purchase price for the Goods shall be [Amount], payable in [Currency], per the terms set forth in Exhibit B attached hereto.3. Delivery. Seller shall deliver the Goods to Buyer at the place designated by Buyer in accordance with the delivery schedule set forth in Exhibit C attached hereto.4. Inspection and Acceptance. Upon delivery, Buyer shall have the right to inspect the Goods and shall have [Number] days from the date of delivery to notify Seller of any nonconforming Goods. Buyer’s failure to give such notice shall constitute acceptance of the Goods.5. Payment. Buyer shall pay Seller the purchase price for the Goods in accordance with the payment terms set forth in Exhibit B attached hereto.6. Warranties. Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [Number] days from the date of delivery.7. Limitation of Liability. In no event shall Seller be liable to Buyer for any indirect, incidental, special, or consequential damages arising from or related to this Contract, whether in contract, tort, or otherwise.8. Governing Law. This Contract shall be governed by and construed in accordance with the laws of [Country].9. Entire Agreement. This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first above written.[Seller]By: _______________________________Name: _____________________________Title: ______________________________[Buyer]By: _______________________________Name: _____________________________Title: ______________________________Exhibit A – Description of GoodsExhibit B – Payment TermsExhibit C – Delivery Schedule外贸合同范本货物销售合同本货物销售合同（“合同”）于[日期]由[卖方]（一家根据[国家]法律组织和设立，主要营业地位于[地址]的公司）与[买方]（一家根据[国家]法律组织和设立，主要营业地位于[地址]的公司）订立和签订。

国际贸易合同中英文对照版

International Trade Contract/国际贸易合同Parties:Seller: (hereinafter referred to as “Party A”)Address:Contact Person:Phone Number:Buyer: (hereinafter referred to as “Party B”)Address:Contact Person:Phone Number:Both parties hereby enter into this contract in accordance with the laws of the People’s Republic of Chinaand international trade practices, based on equality and mutual benefit.一、Products/商品信息1. Product Name/商品名称：2. Specification/规格：3. Quantity/数量：4. Price/价格：5. Delivery Date/交货时间：6. Terms of Payment/付款方式：二、Quality Standard/质量标准All goods delivered by Party A shall comply with the national standards, industrial standards or professionalstandards of the People’s Republic of China, or with the corresponding international standards specified in the contract.三、Packing/包装Goods shall be packed in seaworthy and export-worthy packaging in accordance with relevant standard requirements to ensure the safety and integrity of the goods during transportation.四、Time of Shipment/装运期Party A shall provide a shipping date within 10 days upon receipt of the payment and all the necessary documents from Party B, which includes the contract, L/C and other required certificates.五、Terms of Delivery/交货方式The goods will be delivered by shipping or r transportation to the port of destination specified by Party B.六、Inspection and Acceptance of Goods/检验与验收Party B has the right to inspect the goods before shipment. If the goods are found to be defective or do not meet the agreed-upon specifications, Party B has the right to reject or require the replacement of the goods.七、Force Majeure/不可抗力If either Party is unable to perform its obligations as a result of force majeure, including but not limited to naturaldisasters, war, strikes, and governmental actions, such inability shall not be deemed a breach of contract.八、Arbitration/仲裁Any dispute arising from or in connection with this contract shall be resolved through friendly negotiation. If no resolution can be reached through negotiation, the dispute shall be submitted to the China International Economic and Trade Arbitration Commission for arbitrage in accordance with its rules of procedure.九、Confidentiality/保密Both parties agree to keep confidential any and all information about the contract and related businessactivities, including but not limited to trade secrets, technical and financial data.十、Applicable Law/适用法律This contract is governed by the laws of the People’s Republic of China.十一、Miscellaneous/其他条款1. Any amendment to this contract must be agreed upon in writing by both parties.2. This contract constitutes the entire agreement between the parties and supersedes all prior negotiations, understandings and agreements between the parties.3. This contract shall be binding upon and inure to the benefit of the parties hereto and their respective heirs, executors, administrators, successors and assigns.本文档所涉及简要注释如下：1. L/C（Letter of Credit）信用证：是银行在买卖合同基础上，开出并确保付款的一种承诺性文件。

国际贸易合同范本中英文3篇

国际贸易合同范本中英文3篇篇一国际贸易合同范本中英文合同编号：日期：卖方：地址：电话：电子：买方：地址：电话：电子：买卖双方经协商同意按下列条款成交：1. 货物名称、规格和质量：[具体描述货物的名称、规格和质量]2. 数量：[具体数量]3. 单价：[具体价格]4. 总值：[总价]5. 交货条件：[如 FOB、CIF 等]6. 原产地国别：[货物的原产国]7. 包装及标准：[描述货物的包装方式和标准]8. 唛头：[运输标志]9. 装运期：[预计装运日期]10. 装运口岸和目的地：[装运港和目的港]11. 保险：[由哪方负责购买保险，保险类型和金额]12. 付款条件：[付款方式和时间]13. 单据：[卖方需要提供的单据，如发票、提单等]14. 检验：[检验标准和方式]15. 索赔：[索赔的条件和程序]16. 不可抗力：[不可抗力的定义和处理方式]17. 仲裁：[仲裁的地点和机构]18. 法律适用：[合同适用的法律]19. 其他条款：[其他双方约定的条款]卖方（盖章）：____________________代表（签字）：____________________日期：____________________买方（盖章）：____________________代表（签字）：____________________日期：____________________篇二国际贸易合同范本中英文合同编号：日期：卖方：地址：电话：电子：买方：地址：电话：电子：买卖双方经协商同意按下列条款成交：1. 货物名称、规格和质量：[具体描述货物的名称、规格和质量标准]2. 数量：[具体数量]3. 单价：[具体价格]4. 总值：[总价]5. 交货条件：[说明交货的地点、时间和方式]6. 原产地国别：[货物的原产国家或地区]7. 包装及标准：[描述货物的包装方式和标准]8. 唛头：[规定货物的唛头标记]9. 付款方式：[说明付款的方式和时间]10. 运输方式及费用负担：[指定运输方式，并说明运费的承担方]11. 保险：[说明是否购买保险以及保险的类型和金额]12. 检验：[规定货物的检验方式和标准]13. 索赔：[说明在货物出现问题时的索赔程序和要求]14. 不可抗力：[约定不可抗力事件的处理方式]15. 争议解决：[指定解决争议的方式，如仲裁或诉讼]16. 法律适用：[确定适用的法律]17. 本合同于[合同签订日期]由双方代表签字后生效，一式两份，买卖双方各执一份。

对外贸易合同范本中英文对照5篇

对外贸易合同范本中英文对照5篇第1篇示例：International Trade Contract对外贸易合同Party A: The Exporter (hereinafter referred to as “Party A”)甲方：出口商（以下简称“甲方”）This Contract is made on (date), in (place), between Party A and Party B, for the sale and purchase of the goods as described below.本合同由甲方和乙方于（日期）、（地点）签署，针对以下所述商品的销售和购买事宜。

Article 1 - Description of Goods第一条- 商品描述甲方同意出售，乙方同意购买以下商品：商品名称：（描述）2. Quantity: (Number of units)数量：（单位数量）3. Unit Price: (Price per unit)单价：（每单位价格）总价：（总金额）第二条- 交货条件商品应当通过（交货方式）送达至乙方指定的地址，在约定日期完成交货。

甲方应承担所有运输费用和风险，直至商品交付给乙方为止。

乙方有权在交付时对商品进行检验，并应立即通知甲方任何缺陷或不符合要求之处。

如商品被发现有缺陷或不符合要求，甲方应免费为乙方更换商品。

Article 4 - Payment Terms乙方应在收到商品后（数字）天内以（货币）支付给甲方总额为（总价）的金额。

任何逾期支付应按照每月（利率）的利率计算利息。

第五条- 不可抗力在不可抗力的情况下，任何一方均不应对未能履行本合同承担责任，包括但不限于天灾、战争、恐怖主义和自然灾害。

第六条- 争议解决任何由本合同引起的争议应通过甲乙双方友好协商解决。

如果双方无法达成一致，争议应根据（仲裁机构）规定，由仲裁在（地点）解决。

本合同构成甲方和乙方之间的全部协议，并取代所有先前的协议、了解和磋商。

国际贸易合同样本中英文对照

3.其他权利与义务：
Other Rights and Obligations:
（如有其他特殊权利或义务，应在此处详细说明）
(If there are any other special rights or obligations, they should be detailed here.)
六、违约责任
2.乙方（卖方）的权利与义务：
Rights and Obligations of Party B (Seller):
（描述乙方的权利，如收取合同价款，以及乙方的义务，如提供符合约定的标的物、服务等）
(Describe the rights of Party B, such as receiving the contract price, and the obligations, such as providing the subject matter and services that meet the agreed terms, etc.)
（规定违约方应如何通知对方违约情况，以及违约方采取的补救措施）
(Stipulate how the breaching party should notify the other party of the breach and the remedial measures to be taken by the breaching party.)
4.解除合同的权利：
Right to Terminate the Contract:
（描述在违约情况下，非违约方解除合同的权利和程序）
(Describe the right and procedure for the non-breaching party to terminate the contract in case of breach.)

国际贸易合同(中英文)

国际贸易合同(中英文)国际贸易合同(中英文)英文版本1. Contract PartiesBuyer: [Enter buyer's full legal name]Seller: [Enter seller's full legal name]2. Object and ScopeThis contract is made between the Buyer and the Seller, and it outlines the terms and conditions for the sale and purchase of goods between the parties involved. The goods to be traded are described in detl in Appendix A, which forms an integral part of this contract.3. Price and Payment Terms3.1 The price for the goods shall be as specified in Appendix A.3.2 Payment for the goods shall be made in [currency], according to the following terms:[Specify payment method][Specify payment schedule, if applicable]4. Delivery4.1 The Seller shall ensure the delivery of the goods to the Buyer's designated location, as stipulated in Appendix A.4.2 Delivery shall take place within [number of days] days from the date of the contract's signing, unless otherwise agreed upon by both parties.5. Quality and Inspection5.1 The goods shall conform to the specifications outlined in Appendix A.5.2 The Buyer shall have the right to inspect the goods upon receipt, and any discrepancies or defects shall be communicated to the Seller in writing within [number of days] days of delivery.5.3 If the goods fl to meet the specified quality requirements, the Buyer may, at their discretion, reject the goods or request a replacement or refund.6. Force Majeure6.1 Neither party shall be liable for any delay or flure in fulfilling their obligations under this contract due to force majeure events, including but not limited to natural disasters, acts of war, or governmental restrictions.6.2 The party affected by a force majeure event shall notify the other party promptly and provide reasonable evidence of the event's impact on their ability to perform their obligations.7. Governing Law and Dispute Resolution7.1 This contract shall be governed by the laws of [Enter governing jurisdiction].7.2 Any disputes or disagreements arising from this contract shall be resolved through amicable negotiations between the parties. If a resolution cannot be reached, the dispute shall be submitted to [Enter preferred dispute resolution method], as stated in Appendix B.中文版本1. 合同双方买方： [填写买方全称]卖方： [填写卖方全称]2. 目标和范围本合同由买方和卖方签署，明确双方之间进行货物销售和购买的条款和条件。

国际贸易合同中英文

国际贸易合同中英文International Trade Contract。

本合同由以下双方于（日期）签署：This contract is entered into by and between the following parties on (date):甲方（卖方），（公司名称、地址、联系方式）。

Party A (Seller): (Company Name, Address, Contact Information)。

乙方（买方），（公司名称、地址、联系方式）。

Party B (Buyer): (Company Name, Address, Contact Information)。

鉴于甲方拥有（商品/服务）的销售权，乙方有意购买上述商品/服务，双方经友好协商，达成如下合同：Whereas Party A has the right to sell(commodity/service), and Party B intends to purchase the aforementioned (commodity/service), the parties havereached the following contract through friendly negotiation:一、商品/服务描述：1. Description of Commodity/Service:甲方将向乙方出售（商品/服务）：Party A shall sell to Party B (commodity/service):（商品/服务）的规格、数量、质量标准等详细描述：Detailed description of the specifications, quantity, quality standards, etc. of the (commodity/service):二、价格与付款方式：2. Price and Payment Terms:1）商品/服务的单价为（货币种类+金额），总价为（货币种类+金额）。

国际贸易合同样本中英文对照

CONTRACTNO.: DATE:THE BUYERS:ADDRESS :TEL: FAX:THE SELLERS:ADDRESS:TEL: FAX:This Contract is made by and between the Buyers and the Sellers;whereby the Buyers agree to buy and the Sellers agree to sell theunder mentioned commodity according to the terms andconditions stipulated below:买方与卖方就以下条款达成协议：1. COMMODITY:2. COUNTRY AND MANUFACTURERS: 原产国及造商：3. PACKING:To be packed in standard airway packing. The Sellers shall be liable forany damage of the commodity and expenses incurred on account of improper packingand for any rust attributable to inadequate or improper protective measurestaken by the sellers in regard to the packing. 包装：标准空运包装..如果由于不适当的包装而导致的货物损坏和由此产生的费用;卖方应对此负完全的责任..4. SHIPPING MARK: The Sellers shall mark on each package with fadeless paintthe package number; gross weight; net weight; measurement and the wordings:"KEEP AWAY FROM MOISTURE" "HANDLE WITH CARE" "THIS SIDE UP" etc. and theshipping mark:唛头：卖方应用不褪色的颜料在每个箱子外部刷上箱号、毛重、净重、尺寸;并注明“防潮”、“小心轻放”、“此面向上”等;唛头为:5. TIME OF SHIPMENT装运期： within days after receipt of L/C6. PORT OF SHIPMENT装运港：7. PORT OF DESTINATION目的港： ; CHINA8. INSURANCE保险：To be covered by sellers for 110% invoice value against All Risks.9. PAYMENT付款方式The buyer open an irrevocable 100% L/C at sight in favor of seller 信用证付款：买方给卖方开出100%不可撤销即期信用证.. 银行资料：10. DOCUMENTS:①Full set of Air waybill in original showing “Freight Prepaid” and consignedto applicant. 空运提单一套②Invoice in three copies. 发票一式叁份③Packing list in three copies issued by the Sellers. 装箱单一式叁份④Certificate of Quality issued by the Sellers. 制造厂家出具的质量证明书⑤Insurance Policy. 保险单一份⑥Certificate of origin issued by the Sellers. 原产地证书⑦Manufacturer’s certified copy of fax dispatched to the applicant within 24hours after shipment advising flight No.; B/L No.; shipment date; quantity;Gross weight; Net weight; and value of shipment. 制造厂家通知开证申请人有关货物装运的详细资料传真复印件壹份⑧The seller’s Certificate and waybill certifying that extra documents havebeen dispatched according to the contract terms by express airmail. 卖方有关另外用特快邮寄壹套单据给开证申请人的证明书及邮寄底单.⑨Certificate of No Wooden Packing or Certificate of Fumigation.非木包装声明或熏蒸证.In addition; the Sellers shall; within three days after shipment; send by express airmail one extra sets of the aforesaid documents directly to the Buyers. 另外;卖方应于货物发运后三天内;用特快专递寄送一套上述的单据给买方..11.SHIPMENT: The Sellers shall ship the goods within the shipment time fromthe port of shipment to the destination. Transshipment is allowed. Partial shipment is not allowed. 运输：卖方应于交货期内将合同货物从装货港运到目的港;不许分批;允许转运..12.SHIPPING ADVICE: The sellers shall; immediately upon the completion of theloading of the goods; advise by fax the buyers of the Contract No.; commodity;quantity; invoiced value; gross weight; name of vessel and date of delivery etc. In case due to the sellers not having faxed in time; all losses caused shall be borne by the sellers. 装运通知：卖方应于装货后;立即用传真将有关合同号、货物、数量、发票价值、毛重、运输工具名称、交货日期、货物预计抵达日等资料通知买方..如果由于卖方未能通知买方而造成的所有损失均由卖方承担..13.GUARANTEE OF QUALITY: The Sellers guarantee that the Commodity hereof ismade of the best materials with first class workmanship; brand new and unused;and complies in all respects with the quality and specification stipulated in this Contract. The guarantee period shall be 12 months counting from the date of signing the Acceptance Report of this machine at the end-user‘s site.质量保证：卖方保证合同货物采用最好的材料、精湛的做工、全新、未使用过、质量和技术规格均符合合同的要求..质保期为最终用户签定验收报告后12个月内..14. CLAIMS: Within 90 days after the arrival of the goods at destination; should the quality; specification; or quantity be found in unconformity with the stipulations of the Contract except those claims for which the insurance co’s engineer; have the right to claim for replacement with new goods; or for compensation; and all expenses such as inspection charges; freight for returning the goods and for sending the replacement; insurance premium; storage and loading and unloading charges etc. shall be borne by the Sellers.索赔：货物抵达目的地后90天内;如果质量、技术规格或数量发现与合同的规定不符除过保险公司和运输公司的责任所负;买方应该依据中华人民共和国出入境检验检疫局的检验报告或者是卖方的调试人员在安装调试时出具的报告;有权要求替换或补偿;所有的费用包括商检费、替补件来回的运费、保险费、仓储费、货物装货卸货费等均由卖方承担..卖方的质量保证为签定关于此批货物的验收报告后12个月内；由于货物内在的质量、差的做工、选材不当而造成操作中的货物损坏;买方应立即书面通知卖方;并同时随附中国商检局出具的检验报告作为索赔依据..卖方在接到买方的索赔后;有责任立即解决相应的质量问题、全部或部分地替换货物或根据货物损坏的程度进行折价；如果卖方在收到买方的上述索赔后一个月内未能作出答复;则视为索赔已为卖方所接受..15. FORCE MAJEURE: The Sellers shall not be held responsible for the delay in shipment or non-delivery of the goods due to Force Majeure; which might occur during the process of manufacturing or in the course of loading or transit. The Sellers shall advise the Buyers immediately of the occurrence mentioned above and within fourteen days thereafter; the Sellers shall send by airmail to the Buyers for their acceptance a certificate of the accident issued by the Competent Government Authorities where the accident occurs as evidence thereof. Under such circumstances the Sellers; however; are still under the obligation to takeall necessary measures to hasten the delivery of the goods. In case the accident lasts for more than 10 weeks; the Buyers shall have the right to cancel the Contract.不可抗力：对于制造或装船运输过程中可能产生的不可抗力而造成的迟交货或不能交货;卖方可以不承担责任..卖方应立即在不可抗力产生的十四日内将有关情况通知买方;并且卖方应用航空邮件将有关政府当局部门出具的证明不可抗力产生的文件寄送给买方..在此情况下;卖方仍应尽最大努力采取各种措施促使货物的发运..如果事故持续十周;买方有权取消该合同..16. LATE DELIVERY AND PENALTY: Should the Sellers fail to make delivery on timeas stipulated in the Contract; with exception of Force Majeure causes specified in Clause 15 of this Contract. The Buyers shall agree to postpone the delivery on condition that the Sellers agree to pay a penalty which shall be deducted by the paying bank from the payment. The Penalty; however; shall not exceed 5% of the total value of the goods involved in the late delivery. The rate of penalty is chargedat 0.5% for every seven days. Odd days less than seven days should be counted as seven days. In case the Sellers fail to make delivery ten weeks later than the timeof shipment stipulated in the Contract; the Buyers shall have the right to cancel the contract and the Sellers; in spite the cancellation; shall still pay the aforesaid penalty to the Buyers without delay.迟交货和罚金：如果卖方未能按合同规定及时交货除了本合同15条款所言的不可抗力;买方同意在卖方付罚金的前提下迟交货..罚金的金额不超过迟交货的合同货物部分的价值的5%;罚金按每7日0.5%计算;少于7日的增加天数按7日计..如果卖方未能于合同规定的交货期之后的十周内发运;买方有权取消该合同;除此之外;卖方仍要将有关罚金不加拖延地付给买方..17. ARBITRATION: Any dispute arising from or in connection with this Contract shallbe submitted to China International Economic and Trade Arbitration Commission for arbitration which shall be conducted in accordance with the Commission's arbitration rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both partied. Arbitration fee shall be borne by the losing party.仲裁：与此合同有关的争议应通过友好协商解决..如果协商无法解决;提交中国国际经济贸易仲裁委员会进行仲裁..按照申请仲裁时该会现行有效的仲裁规则进行仲裁..仲裁裁决是终局的;对双方均有约束力..仲裁费用由败诉方承担..18.BANK CHARGES: All bank charges outside China will be on the account of the Sellers.银行费用：所有中国之外的银行费用均由卖方承担..19.OTHER: This contract signed in three copies; the seller holds one copy and the buyer hold two copies. 其它：本合同一式叁份;卖方执壹份; 买方执贰份..THE BUYERS： THE SELLERS：。

国际贸易合同样本中英文对照

国际贸易合同样本中英文对照International Trade Contract Sample (English-Chinese Comparison)Contract No.: [Contract Number]Date: [Date of Contract]Party A: [Name of the Exporter]Address: [Address of Party A]Contact Person: [Name of the Contact Person]Email: [Email Address]Phone: [Phone Number]Party B: [Name of the Importer]Address: [Address of Party B]Contact Person: [Name of the Contact Person]Email: [Email Address]Phone: [Phone Number]Article 1: Definitions1.1 "Contract" refers to this International Trade Contract, including all its annexes and amendments, entered into between Party A and Party B.1.2 "Goods" means the products and merchandise to be sold or purchased under this Contract, as specified in Annex A.1.3 "Price" refers to the amount to be paid by Party B to Party A for the Goods, as specified in Annex B.Article 2: Delivery and Acceptance2.1 Party A shall deliver the Goods to the address provided by Party B within the agreed timeframe and in accordance with the specifications and quality requirements set forth in Annex A.2.2 Party B shall inspect the Goods upon receipt and notify Party A in writing within [number] days of any defects or non-conformity to the agreed specifications. Failure to notify within the specified timeframe shall be deemed as acceptance of the Goods.Article 3: Terms of Payment3.1 The Price of the Goods shall be paid by Party B to Party A in [currency] within [number] days from the date of receipt of the Goods and invoice.3.2 All bank charges and fees related to the payment shall be borne by Party B.Article 4: Title and Risk4.1 Title to the Goods shall pass from Party A to Party B upon full payment of the Price.4.2 Risk of loss or damage to the Goods shall pass from Party A to PartyB upon delivery of the Goods.Article 5: Force Majeure5.1 Either Party may be excused from the performance of its obligations under this Contract to the extent that such performance is hindered or delayed by any events or circumstances beyond its reasonable control, including but not limited to acts of God, war, strikes, or natural disasters.5.2 The Party affected by a force majeure event shall promptly notify the other Party in writing and provide detailed information regarding the event's impact on its ability to perform its obligations.Article 6: Governing Law and Jurisdiction6.1 This Contract shall be governed by and construed in accordance with the laws of [Jurisdiction], without regard to its conflicts of laws principles.6.2 Any disputes arising out of or in connection with this Contract shall be resolved through amicable negotiations between the Parties. If the Parties fail to reach a mutually acceptable resolution, the dispute shall be submitted to the exclusive jurisdiction of the courts of [Jurisdiction].Article 7: Entire Agreement7.1 This Contract constitutes the entire agreement between Party A and Party B with respect to the subject matter herein and supersedes all prior understandings, agreements, and negotiations, whether oral or written, relating to such subject matter.7.2 No amendment to this Contract shall be valid unless it is in writing and signed by both Parties.Article 8: Confidentiality8.1 Both Parties shall keep all information and documents exchanged under this Contract confidential and shall not disclose or use such information for any purpose other than the performance of this Contract, without the prior written consent of the other Party.8.2 The obligations of confidentiality under this Article shall survive the termination or expiration of this Contract.In witness whereof, the Parties hereto have caused this International Trade Contract to be duly executed and delivered as of the date first above written.Party A: [Signature]Name: [Name of the Authorized Signatory]Party B: [Signature]Name: [Name of the Authorized Signatory]。

国际贸易合同中英文对照版

国际贸易合同中英文对照版International Trade Contract - Chinese and English Version1. IntroductionInternational trade contracts play a crucial role in facilitating trade relations between companies from different countries. These contracts provide a framework for conducting business transactions, ensuring the rights and obligations of all parties involved. In this article, we will present a Chinese and English version of an international trade contract, aimed at promoting clarity and understanding between the parties involved.2. Contract Parties2.1 Party A: [Name of Company/Individual]Address: [Complete Address]Contact Person: [Name]Telephone: [Phone number]Email: [Email address]2.2 Party B: [Name of Company/Individual]Address: [Complete Address]Contact Person: [Name]Telephone: [Phone number]Email: [Email address]3. Contract Terms3.1 Scope of ContractThis contract pertains to the following products/services: [Provide detailed description]3.2 Quantity and QualityParty A agrees to supply Party B with [quantity] of [product/service] within the agreed-upon timeframe. The quality of the products/services shall meet international standards and specifications as mutually agreed upon.3.3 Pricing and Payment TermsThe price for the products/services shall be [amount] per [unit]. Party B shall make the payment in [currency] to Party A within [number] days of receiving the invoice. Payment shall be made via [preferred payment method].3.4 Delivery TermsThe products/services shall be delivered to the designated location as specified by Party B. The delivery shall be completed by [date]. Any delays in delivery must be communicated in writing and agreed upon by both parties.3.5 Force MajeureIn the event of unforeseen circumstances beyond the control of either party, such as natural disasters, war, or government regulations, that prevent the execution of this contract, both parties shall be exempt from any liability and will make reasonable efforts to minimize the impact on the contract.4. Dispute ResolutionAny disputes or disagreements arising from this contract shall be settled through friendly negotiation. If the parties fail to reach a resolution, the dispute shall be submitted to the International Chamber of Commerce (ICC) for arbitration, in accordance with its rules and procedures.5. ConfidentialityBoth parties agree to maintain the confidentiality of any proprietary or confidential information exchanged during the course of this contract. Such information shall not be disclosed to any third parties without prior written consent.6. Governing Law and JurisdictionThis contract shall be governed by and construed in accordance with the laws of [Country]. Any disputes regarding this contract shall be subject to the exclusive jurisdiction of the courts of [Country].7. TerminationThis contract may be terminated by either party in the event of a material breach by the other party. Notice of termination must be given in writing, specifying the reasons for termination and providing a reasonable timeframe for the other party to rectify the breach.8. Entire AgreementThis contract constitutes the entire agreement between Party A and Party B and supersedes any prior negotiations, understandings, or agreements, whether written or oral, relating to the subject matter herein.9. LanguageThis contract is prepared in both Chinese and English languages, with both versions having equal validity. In case of any discrepancies or conflicts between the two versions, the Chinese version shall prevail.10. SignaturesParty A: ___________________ Date:___________________Party B: ___________________ Date:___________________Please note that this sample international trade contract is for reference purposes only. It is recommended to seek legal advice and adapt the contract to specific needs and requirements before use.。

国际贸易合同中英文对照

国际贸易合同卖方：___________________________ 买方：___________________________ 签订日期： _____ 年 ____ 月_____ 日卖方：Sellers :地址：Address :邮政编码：Postal Code电话：Tel :传真：Fax:买方：Buyers :地址：Address :邮政编码：Postal Code电话：Tel :传真：Fax:买卖双方同意按下列条款由卖方出售，买方购进下列货物：The sellers agrees to sell and the buyer agrees to buy the undermentioned goods on the terms and con diti ons stated below:6 总值：Total Amou nt:数量及总值均有％勺增减，由卖方决定。

With %more or less both in amount and quantity allowed at the sellersoptio n.7 生产国和制造厂家：Cou ntry of Origin and Manu facturer:8 包装：Packing :9 唛头：Shippi ng Marks :10 装运期限：Time of Shipme nt :11 装运口岸：Port of Loadi ng :12 目的口岸：Port of Destination :13保险：由卖方按发票全额110%投保至为止的险。

In sura nee : To be effected by buyers for 110% of full in voice value coveri ngup to only.14付款条件:买方须于年月日将保兑的，不可撤销的，可转让可分割的即期信用证开到卖方。

信用证议付有效期延至上列装运期后15天在中国到期，该信用证中必须注明允许分运及转运。

国际贸易合同样本中英文对照

【国际贸易合同样本中英文对照】International Trade Contract Sample甲方（卖方）：[公司名称][地址][邮编]Party A (Seller): [Company Name] [Address] [Postcode]乙方（买方）：[公司名称][地址][邮编]Party B (Buyer): [Company Name] [Address] [Postcode]双方根据《中华人民共和国合同法》和《国际商会货物销售合同通则》的规定，经平等商议，达成如下合同：In accordance with the Contract Law of the People's Republic of China and the Uniform Rules for Contracts of International Sale of Goods of ICC, the two parties have reached the following agreement through consultation on an equal footing:第一条合同名称及编号Article 1 Name and Number of the Contract1.1 合同名称为 [合同名称] ，编号为 [合同编号]。

The name of this contract is [Contract Name], and the contract number is [Contract Number].第二条商品名称及规格Article 2 Commodity Name and Specifications2.1 商品名称：[商品名称]。

The name of the commodity: [Commodity Name].2.2 规格：详见附件。

Specifications: see attached.第三条数量Article 3 Quantity3.1 商品数量为 [商品数量]。

外贸合同中英文3篇

外贸合同中英文外贸合同中英文精选3篇（一）外贸合同范本甲方（买方）：[买方公司全称]地址：[买方公司地址]联系人：[买方联系人姓名]电话：[买方联系电话]邮箱：[买方联系邮箱]乙方（卖方）：[卖方公司全称]地址：[卖方公司地址]联系人：[卖方联系人姓名]电话：[卖方联系电话]邮箱：[卖方联系邮箱]产品名称：[产品名称]规格型号：[产品规格型号]数量：[产品数量]单价：[产品单价]总价：[产品总价]质量要求：[对产品质量的具体要求]交货日期：[具体的交货日期]交货方式：[交货的具体方式，如FOB、CIF等]交货地点：[具体的交货地点]总价：[合同总价]付款方式：[具体的付款方式，如T/T、L/C等]付款条件：[具体的付款条件，如预付款比例、余款支付时间等] 乙方应保证所供产品符合合同约定的质量要求。

甲方有权对产品进行检验，如发现质量问题，应在交货后[具体时间]内通知乙方。

如一方违约，应向对方支付违约金，违约金为合同总价的[具体比例]。

如因不可抗力导致无法履行合同，双方应及时沟通，协商解决。

双方因履行本合同而发生的争议，应首先通过友好协商解决；协商不成时，可提交[具体仲裁机构]进行仲裁。

本合同自双方签字盖章之日起生效。

本合同一式两份，甲乙双方各执一份，具有同等法律效力。

甲方（盖章）：_________________ 日期：年__月__日乙方（盖章）：_____________ 日期：____年__月__日外贸合同中英文精选3篇（二）外贸合同是国际贸易中非常重要的法律文件，它规定了买卖双方的权利和义务，是解决贸易争端的依据。

一个完整、实用性强的外贸合同应包含以下基本内容：卖方信息：包括卖方的全称、注册地址、联系方式、法定代表人或授权代表等。

买方信息：包括买方的全称、注册地址、联系方式、法定代表人或授权代表等。

产品名称：详细列明交易产品名称。

规格型号：产品的规格、型号、等级、标准等。

数量：产品的订购数量。

国际贸易合同中英文对照版

国际贸易合同中英文对照版International Trade Contract - English and Chinese Version 1. 甲方（以下简称“卖方”）：__________Party A (referred to as "Seller"): ________2. 乙方（以下简称“买方”）：__________Party B (referred to as "Buyer"): ________3. 合同编号：__________Contract Number: ________4. 签订日期：__________Date of Signing: ________5. 商品描述：Description of Goods:（1）名称：__________Name: ________（2）数量：__________Quantity: ________（3）单价：__________Unit Price: ________6. 交货方式：Delivery Method:（1）交货日期：__________ Delivery Date: ________（2）交货地点：__________ Delivery Location: ________（3）验收标准：__________ Acceptance Standards: ________ 7. 付款方式：Payment Method:（1）首付金额：__________ Down Payment: ________（2）付款期限：__________ Payment Deadline: ________（3）付款方式：__________ Payment Method: ________8. 质量保证：Quality Assurance:（1）质量标准：__________ Quality Standards: ________（2）质量检验：__________ Quality Inspection: ________（3）退换货政策：__________ Return and Exchange Policy: ________ 9. 运输方式：Transportation Method:（1）运输方式：__________ Shipping Method: ________（2）费用承担：__________Cost Responsibility: ________（3）保险责任：__________ Insurance Responsibility: ________ 10. 违约责任：Liability for Breach:（1）卖方违约责任：__________ Seller's Liability for Breach: ________（2）买方违约责任：__________ Buyer's Liability for Breach: ________ 11. 争议解决：Dispute Resolution:（1）协商解决：__________ Negotiation: ________（2）仲裁解决：__________ Arbitration: ________（3）法院解决：__________Court Litigation: ________12. 生效、变更和解除：Effectiveness, Amendment, and Termination:（1）生效方式：__________Effective Method: ________（2）变更协议：__________ Amendment Agreement: ________（3）解除条件：__________ Termination Conditions: ________13. 适用法律和管辖权：Applicable Law and Jurisdiction:（1）适用法律：__________Applicable Law: ________（2）管辖权：__________Jurisdiction: ________合同附件：Contract Attachments:（1）合同正本：__________Original Contract: ________（2）相关证明文件：__________Relevant Certificates: ________注意事项：Notes:（1）本合同中的所有金额单位为__________All monetary amounts in this contract are in ________.（2）本合同中的所有日期格式为__________All dates in this contract are in the format of ________.（3）本合同以中英文两种文字书写，两种文字具有同等法律效力。

外贸合同范本中英文6篇

外贸合同范本中英文6篇篇1International Trade Contract TemplateThis International Trade Contract is made and entered into on this ___ day of ____, 20__, by and between:Seller: [Seller’s Name and Address]Buyer: [Buyer’s Name and Address]Whereas, Seller wishes to sell the following products:[Description of Products]And Buyer wishes to purchase said products according to the terms and conditions set forth in this contract.Now, therefore, in consideration of the premises and the covenants contained herein, the parties agree as follows:1. Products: Seller agrees to sell and Buyer agrees to purchase the above-described products in the quantities and at the prices set forth in Attachment A, which is hereby incorporated by reference.2. Price: The total price of the products sold under this contract shall be [Total Price], payable as follows:[Payment Schedule]3. Delivery: The products shall be delivered to Buyer’s location at [Delivery Address] in accordance with the delivery schedule set forth in Attachment B.4. Inspection and Acceptance: Buyer shall have the right to inspect the products upon delivery and shall have [Number] of days to notify Seller of any defects or non-conformities. If Buyer fails to notify Seller within that time frame, the products shall be deemed accepted.5. Risk of Loss: The risk of loss shall pass to Buyer upon delivery of the products to Buyer’s location.6. Warranty: Seller warrants that the products shall be free from defects in material and workmanship for a period of [Warranty Period]. Seller’s liability under this warranty shall be limited to repair, replacement, or refund of the purchase price at Seller’s option.7. Governing Law: This contract shall be governed by and construed in accordance with the laws of [Governing Law].8. Dispute Resolution: Any disputes arising out of or in connection with this contract shall be settled through negotiation between the parties. If a resolution cannot be reached, the matter shall be submitted to arbitration in accordance with the rules of [Arbitration Rules].9. Entire Agreement: This contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this contract as of the date first above written.Seller:_____________________[Seller’s Signature]Buyer:_____________________[B uyer’s Signature]Attachment A: Description of Products and PricesAttachment B: Delivery Schedule篇2Foreign Trade Contract SampleThis contract is made and entered into on this ___ day of ___, 20__ by and between Seller, (hereinafter referred to as "Seller") and Buyer, (hereinafter referred to as "Buyer").1. GOODS: The Seller agrees to sell, and the Buyer agrees to buy, the following goods (hereinafter referred to as "Goods"):Description: [insert detailed description of the goods being sold]Quantity: [insert quantity of goods being sold]Unit Price: [insert unit price of goods]Total Price: [insert total price of goods]2. DELIVERY: The Seller agrees to deliver the Goods to the Buyer at [insert delivery location] on or before [insert delivery date]. The Buyer shall be responsible for any costs associated with the transportation and insurance of the Goods.3. PAYMENT: The Buyer agrees to pay the Seller the total price of the Goods in full within [insert payment terms] days of receiving the Goods. Payment shall be made by [insert payment method].4. INSPECTION: Upon receiving the Goods, the Buyer shall have [insert inspection period] days to inspect the Goods and notify the Seller of any defects or non-conformance. The Seller shall bear the cost of any necessary repairs or replacements.5. WARRANTY: The Seller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications set forth in this contract. The Seller's liability under this warranty shall be limited to the repair or replacement of the defective Goods.6. FORCE MAJEURE: Neither party shall be liable for any delay or failure to perform its obligations under this contract due to acts of God, war, terrorism, riots, strikes, fires, floods, or other similar events beyond its reasonable control.7. DISPUTE RESOLUTION: Any disputes arising out of or relating to this contract shall be resolved through arbitration in accordance with the rules of [insert arbitration organization]. The decision of the arbitrator shall be final and binding on both parties.8. GOVERNING LAW: This contract shall be governed by and construed in accordance with the laws of [insert governing law jurisdiction].IN WITNESS WHEREOF, the parties hereto have executed this contract as of the date first above written.SELLER: _____________________________ DATE: _________________BUYER: _____________________________ DATE: _________________This contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether written or oral.篇3**International Trade Contract Sample****Contract No.:** XXXXXX**Date:** XXXXX**PARTIES:****Seller:** ABC CompanyAddress: XXXXXXXRepresented by: Mr./Ms. XXXXXX**Buyer:** XYZ CompanyAddress: XXXXXXXRepresented by: Mr./Ms. XXXXXX**RECITALS:**1. The Seller is engaged in the business of manufacturing and selling [products/services].2. The Buyer is engaged in the business of [description of Buyer's business].3. The Parties wish to enter into a contract for the sale and purchase of [products/services] in accordance with the terms and conditions set forth herein.**TERMS AND CONDITIONS:****1. Product Description:**a. The Seller agrees to sell and the Buyer agrees to purchase [description of products/services].**2. Quantity:**a. The quantity of [products/services] to be delivered shall be as specified in the Purchase Order issued by the Buyer and accepted by the Seller.**3. Price:**a. The price of the [products/services] shall be [price] per unit, as agreed upon by both Parties.**4. Payment Terms:**a. The Buyer shall make payment for the [products/services] within [number of days] days of the date of delivery.b. Payments shall be made in [currency] to the Seller's designated bank account.**5. Delivery:**a. The Seller shall deliver the [products/services] to the Buyer's specified location as per the agreed delivery schedule.**6. Quality Assurance:**a. The Seller warrants that the [products/services] shall conform to the agreed specifications and be free from defects in material and workmanship.**7. Warranty:**a. The Seller shall provide a warranty period of [number of months/years] for the [products/services] against defects.**8. Force Majeure:**a. Neither Party shall be liable for any delay or failure to perform its obligations under this Contract due to circumstances beyond its reasonable control.**9. Governing Law:**a. This Contract shall be governed by and interpreted in accordance with the laws of [Country].**10. Dispute Resolution:**a. Any dispute arising out of or in connection with this Contract shall be resolved amicably between the Parties. If the Parties are unable to reach a resolution, the dispute shall be referred to arbitration in accordance with the rules of [Arbitration Institution].**11. Confidentiality:**a. The Parties agree to keep confidential all information disclosed during the course of negotiations and performance of this Contract.**12. Entire Agreement:**a. This Contract constitutes the entire agreement between the Parties with respect to the sale and purchase of the[products/services] and supersedes any prior agreements or understandings.**IN WITNESS WHEREOF,** the Parties have executed this Contract as of the date first written above.**SELLER:**Signature: ___________________Name: ___________________Title: ___________________**BUYER:**Signature: ___________________Name: ___________________Title: ___________________**Witnessed by:**Signature: ___________________Name: ___________________Title: ___________________**This Contract is in English language. In case of discrepancy between the English version and any translated version, the English version shall prevail.**---------------------------------------**Please note:** This is a standard international trade contract sample. Parties are advised to seek legal advice and tailor the contract to their specific requirements and circumstances.篇4International Sale ContractThis Agreement is entered into on [Date], by and between [Seller], a company organized and existing under the laws of [Country], with its principal place of business at [Address], and [Buyer], a company organized and existing under the laws of [Country], with its principal place of business at [Address].1. Sale of Goods: Seller agrees to sell to Buyer, and Buyer agrees to purchase from Seller, the goods described as follows: [Description of Goods, Quantity, Quality, Price, etc.].2. Delivery: The goods shall be delivered by [Shipping Method] to [Delivery Address] within [Delivery Timeframe] days from the date of this Agreement.3. Payment: The purchase price for the goods shall be [Amount] payable in [Currency] upon delivery. Payment shall be made by [Payment Method].4. Inspection: Buyer shall have the right to inspect the goods upon delivery and shall notify Seller of any defects or nonconformities within [Inspection Period] days. Failure to notify Seller within this timeframe shall constitute acceptance of the goods.5. Warranty: Seller warrants that the goods shall conform to the specifications as described in this Agreement and shall be free from defects in material and workmanship for a period of [Warranty Period] days from the date of delivery.6. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of [Country]. Any disputes arising under this Agreement shall be settled through arbitration in [City], [Country] in accordance with the rules of the [Arbitration Association].7. Entire Agreement: This Agreement constitutes the entire understanding between the parties with respect to the sale of the goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of the date first above written.[Seller] [Buyer]By: _______________ By: _______________Name: Name:Title: Title:篇5International Trade AgreementThis International Trade Agreement (" Agreement ") is entered into on this [date], by and between [Company Name], having its principal place of business at [address] (" Company "), and [Trading Partner Name], having its principal place of business at [address] (" Trading Partner ").WHEREAS, Company wishes to purchase certain goods from Trading Partner and Trading Partner wishes to sell such goods to Company for export to Company's customers around the world;NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties agree as follows:1. Description of Goods: Trading Partner agrees to sell and deliver the goods as described on Exhibit A attached hereto (the " Goods ") to Company in accordance with the terms and conditions of this Agreement.2. Purchase Price: The purchase price for the Goods shall be as set forth in Exhibit A.3. Shipping Terms: Trading Partner agrees to deliver the Goods to Company within [number] days of receipt of Company's purchase order. The Goods shall be shipped DDU (Delivered Duty Unpaid) to Company's designated location.4. Payment Terms: Company shall pay Trading Partner for the Goods in the amount and in the manner specified in Exhibit A.5. Inspection: Company shall have the right to inspect the Goods upon receipt, and any defects or discrepancies shall be reported to Trading Partner within [number] days of receipt.6. Warranty: Trading Partner represents and warrants that the Goods will be free from defects in material and workmanship and will conform to the specifications set forth in Exhibit A.7. Indemnification: Each party shall indemnify, defend, and hold harmless the other party from and against any and all claims, damages, losses, liabilities, and expenses arising out of or related to the performance of this Agreement.8. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of [jurisdiction].IN WITNESS WHEREOF, the parties have caused this Agreement to be duly executed and delivered as of the date first written above.[Company Name]By: _____________________________Name: ___________________________Title: ____________________________[Trading Partner Name]By: _____________________________Name: ___________________________Title: ____________________________Exhibit ADescription of Goods: [insert description]Purchase Price: [insert price]Delivery Date: [insert date]Payment Terms: [insert terms]篇6Foreign Trade Contract TemplateThis agreement is made and entered into by and between [Seller's Name], a company organized and existing under the laws of [Seller's Country], with its principal place of business at [Seller's Address], and [Buyer's Name], a company organized and existing under the laws of [Buyer's Country], with its principal place of business at [Buyer's Address].1. Subject Matter of the Contract: The Seller agrees to sell and the Buyer agrees to purchase the following goods [describe goods in detail, including quantity, quality, specifications, and any other relevant information].2. Price: The price of the goods shall be [price in currency] per [unit of measurement]. The total price of the goods is [total price in currency]. Payment shall be made in [payment terms, e.g., 30% advance payment, balance upon delivery].3. Delivery: The Seller shall deliver the goods to the Buyer's designated location [delivery terms, e.g., EXW, FOB, CIF] on or before [delivery date]. The Buyer shall be responsible for all costs associated with the transportation of the goods from the Seller's place of business to the Buyer's designated location.4. Inspection and Acceptance: The Buyer shall have [number of days] days from the date of delivery to inspect the goods and notify the Seller in writing of any defects or non-conformities. If the Buyer does not notify the Seller within the specified time period, the goods shall be deemed accepted.5. Title and Risk of Loss: Title to the goods shall pass to the Buyer upon delivery. The risk of loss or damage to the goods shall pass to the Buyer upon acceptance of the goods.6. Force Majeure: Neither party shall be liable for any delay or failure to perform its obligations under this agreement if such delay or failure is caused by an event of force majeure, including but not limited to acts of God, strikes, riots, wars, or government regulations.7. Governing Law and Dispute Resolution: This agreement shall be governed by and construed in accordance with the laws of [Seller's Country]. Any disputes arising out of or relating tothis agreement shall be resolved by arbitration in [Arbitration Forum] in accordance with its rules and procedures.8. Entire Agreement: This agreement constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements and understandings, whether written or oral.In witness whereof, the parties hereto have caused this agreement to be executed by their duly authorized representatives as of the date first above written.[Seller's Name]By: _________________________________Name: _______________________________Title: ________________________________[Buyer's Name]By: _________________________________Name: _______________________________Title: ________________________________Date: _________________________________。

英文版外贸合同(中英文对照版)

英文版外贸合同(中英文对照版)International Sales Contract国际销售合同This International Sales Contract (hereinafter referred to as "Contract") is made and entered into by and between Party A, seller, and Party B, buyer, on the date of signature of this Contract. 本国际销售合同（以下简称“合同”）由甲方，即卖方，和乙方，即买方，在本合同签署之日签署并生效。

Article 1. Product Description第一条产品描述1.1 Party A agrees to sell, and Party B agrees to purchase the Products described in this Contract.1.1 甲方同意出售，乙方同意购买本合同所述的产品。

1.2 The Products, quantity, specification, unit price, and total value are as follows:1.2 产品、数量、规格、单价和总价如下：Products 产品 Quantity 数量 Specification 规格 Unit Price 单价Total Value 总价Article 2. Delivery第二条交货2.1 Delivery shall be made in accordance with the terms of this Contract.2.1 交货应按照本合同的条款进行。

2.2 Party A shall deliver the Products to the place designated by Party B.2.2 甲方应将产品交付至乙方指定的地点。