基于8051+PROTEUS仿真100实例
单片机C语言程序的设计实训100例_基于8051+PROTEUS仿真1
单片机C语言程序设计卖训100例—基于8051+Proteus仿真》案例目录第一篇基础程序设计 (1)01闪烁的LED (1)02 从左到右的流水灯 (1)03 8只LED左右来回点亮 (2)04花样流水灯 (3)05 LED模拟交通灯 (4)06单只数码管循环显示0~9 (5)07 8只数码管滚动显示单个数字 (6)08 8只数码管动态显示多个不同字符 (7)09 8只数码管闪烁显示数字串 (8)108只数码管滚动显示数字串 (9)11K1-K4 控制LED 移位 (10)12K1-K4按键状态显示 (11)13K1-K4 分组控制LED (12)14K1-K4控制数码管移位显示 (13)15K1-K4控制数码管加减演示 (14)164X4矩阵键盘控制条形LED显示 (16)17数码管显示4X4矩阵键盘按键号 (17)18开关控制LED (19)19继电器控制照明设备 (20)20数码管显示拨码开关编码 (21)21开关控制报警器 (22)22按键发音 (22)23播放音乐 (23)24INTO中断计•数 (24)25外部INTO中断控制LED (26)26INTO及INTI中断计数 (26)27定时器控制单只LED (28)28TIMER0控制流水灯 (29)29定时器控制4个LED滚动闪烁 (30)30TO控制LED实现二进制计数 (31)31TIMER0 与TIMER 1 控制条形LED (31)32 10s的秒表 (32)33用计数器中断实现100以的按键计数 (34)34 100 000s以的计时程序 (35)35定时器控制数码管动态显示 (37)36 8X8LED点阵显示数字 (38)37按键控制8X8LED点阵屏显示图形 (39)38用泄时器设计的门铃 (40)39演奏音阶 (41)40按键控制定时器选播多段音乐 (42)41定时器控制交通指示灯 (44)42报警与旋转灯 (46)43串行数据转换为并行数据 (47)44并行数据转换为串行数据 (48)45甲机通过串口控制乙机LED (49)46单片机之间双向通信 (51)47单片机向主机发送字符串 (55)48 单片机与PC通信 (56)第二篇硬件应用 (58)01 74LS138译码器应用 (58)02 74HC154译码器应用 (58)03 74HC595串入并出芯片应用 (59)04 74LS148扩展中断 (60)06 24C04与数码管 (64)07 用6264扩展存 (67)08用8255实现接口扩展（仿真未成功） (67)09 555定时器实验 (69)10BCD译码数码管显示数字 (69)11MAX7221控制数码管动态显示 (70)12LCD 1602字符液晶滚动演示程序 (71)19用ADCO8O8控制PWM输出 (76)20ADC0809数模转换与显示 (77)第一篇基础程序设计01闪烁的LED/*需称：闪烁的LED说明：LED按设定的时间间隔闪烁 */#include<reg51.h>#define uchar unsigned char#define uint unsigned int ;r~sbit LED=P1A O; 丄■//延时void DclayMS(uint x)uchar i;while(x-){ for(i=0;i<120;i++);}}//主程序void main()while(l){LED=~LED;DclayMS(150);02从左到右的流水灯匸/*划称：从左到右的流水灯说明:接在P0 口的8个LED 从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char #define uint unsigned int 〃延时.ioyp.-Z-T"~\ VTAI 1PO.O/ADD>XIALlSZTAI CPO 1/AD1P0.2/AD2P0.3/AD3Al ALzOQTPO 4/ftD4P0.5/AD5PO 6/AD6DA 7/Zi Ti7m IP2.WA6P2.1^9P2.2JA10P3ENALE ETTP2.3JA11P2.4JA12P2.5JA13P2.6.IA14P2.7JA15P1.0 P3.0JRXDP1.1 P3.1/E<DP1.2 P3JJINT0P1.3 P1.4 P3.3JINT1P3.4JT0PI.5 P3.5H-1P1.6 P3B/WRPI.7P3.7JRD1di-t4l=5-10*一—LLdidfdi-II J.和_i_ 匚1•—l—r*iiXTAL2pcmw 町MWP04MC7POVAWM7ZAC7rarMEPIQPI 1PINPl、PI 42P25 7P21<69P22AMDP2SUA11P2M2P2SJAUP3QK>DP31/TXD P〉2询PJ>«7T FP33T0PJ壮瓯曲void DclayMS(uint x)uchar i; while(x-) {for(i=0;i<120;i++); } }//主程序void main() {PO=Oxfe; while(l) {PO=_crol_(POJ);//PO 的值向左循环移动 DclayMS(150);03 8只LED 左右来回点亮/*需称：8只LED 左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*///主程序void main() {uchar i; P2=0x01; while(l)for(i=0:i<7;i++)#include<reg51.h> #include<intrins.h>#define uchar unsigned char #define uint unsigned int//延时void DclayMS(uint x)uchar i; while(x-) { for(i=0;i<120;i++);XTAL1P01'A£?31STP0525斫PZCW P21皿 P22CX10 P23^11ALEAP2WI0 P1.0 P2a«A14 P2TXftl5 P3QQ 口 PI 1 Mimr. PI ? P3.2C1HL Pl 3 P3.3r<n Pt < P 、d/TO”5 PMS PI .6 P3.6VIB PI 7P37.R7Z2QP2=_crol_(P2.1);//P2的值向左循环移动DelayMS(150);for(i=0;i<7;i++){P2=_cror_(P2J);//P2的值向右循坏移动DelayMS(150);04花样流水灯C1torD10□□1D3呦D11吟012XTAURM233R15DI 5沁;D17R3R18 XTALf Fpauxia随Mam冈鬧5S3?/*名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示 */ #include<reg51.h> #define uchar unsigned char #define uint unsigned int uchar code Pattern_PO[]= {0xfct0xf9,0xf3,0xe7,0xcf.0x9f.0x3f.0x7f,0xff,0x(f,0xff0xff.0xff.0xff,0xff,0xff 0xc7・0xdb,0xbd・0x7c・0xbd、0xdb・0xc7,0xff.0xc7・0xc3,0x81,0x00,0x81.0xc3,0xe7,0xff,0xaa,0x55,0x 1 & 0xfT,0xf0,0x0f,0x00,0xfT,0xf8,Oxfl ,0xc3,0xc7,0x8f,0x 1 f.0x3f.0x7f,Ox7f.Ox3f,Ox 1 f,0x8f,0xc7,0xc3,0xf 1,0xf8r0xff,0x00,0x00.0xff,0xff,0x0f,0xf0,0xff0xfe,0xfd,0xfb,0xf7,0xet0xdf?0xbf.0x7f,0xff,0xff0xfL0xff.0xff.0xff.0xff.0xff,0xff,0xff,0xff0xff,0xff0xff.0xff.0xff0x7f.0xbf0xdf,0xeL0xf750xfb.0xfd.0xfe,0xfe,0xfc,0xf8,0xf0,0xe0.0xc0,0x80.0x00,0x00.0x00,0x00.0x00,0x00,0x00.0x00,0x00t0x00,0x00.0x00,0x00,0x00,0x00,0x00.0x00,0x00.0x80.0xc0.0xe0,0xf0,0xf8r0xfc.0xfe, OxOO,Oxff.OxOO.Oxff,OxOO.Oxff.OxOO.Oxff};uchar code Pattern_P2[]={0xff.0xff,0xff,0xff,0xft0xff.0xff.0xfe.0xfc,0xf9.0xf3,0xe7,0xct0x9L0x3f,0xff0xe7,0xdb.0xbd,0x7e,0xbd.0xdb.0xe7,0xff,0xe7.0xc3,0x81,0x00,0x81 ・0xc3,0xc7,0xff.0xaa,0x55,0x 1 & OxfT,OxfO,OxOf,0x00,0xfT,0xf8,Oxfl ,0xc3,0xc7,0x8f,0x 1 f.0x3f.0x7f, 0x7f,0x3f,0x 1 f,0x8f,0xc7,0xe3,0xf 1,0xf8,0xff,0x00,0x00.0xff,0xff,0x0f,0xf0,0xff0xff.0xff,0xff0xff,0xft0xff.0xff.0xff.0xfe,0xfd.0xfb,0xf7,0xef,0xdC0xbf.0x7f0x7f.0xbf0xdf,0xet0xf7.0xfb.0xfd.0xfe.0xff,0xff,0xff,0xff0xffr0xff.0xff.0xff,0xff.0xff,0xff,0xff,0xff.0xff.0xff.0xff.0xfe,0xfc50xf8.0xf0,0xe0.0xc0.0x80.0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xfT,0xff, OxOO,Oxff.OxOO.Oxff,OxOO.Oxff,OxOO.Oxff}；03D2D142XR16R17〃延时void DelayMS(uint x){ uchar i;while(x-){for(i=0;i<120;i++);〃主程序void main(){uchar i;while(l){ 〃从数组中读取数据送至P0和P2 口显示for(i=0;i<136;i++){PO=Pattern_PO[i];P2=Pattern_P2[i];DelayMS(lOO);05 LED模拟交通灯/*名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
51单片机仿真100实例
《单片机C语言程序设计实训100例—基于8051+P r o t e u s仿真》案例第01篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#defineucharunsignedchar#defineuintunsignedintsbitLED=P1^0;//延时voidDelayMS(uintx){uchari;while(x--){for(i=0;i<120;i++);}}//主程序voidmain(){while(1){LED=~LED;DelayMS(150);}}02从左到右的流水灯/* 名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#defineucharunsignedchar#defineuintunsignedint//延时voidDelayMS(uintx){uchari;while(x--){for(i=0;i<120;i++);}}//主程序voidmain(){P0=0xfe;while(1){P0=_crol_(P0,1);//P0的值向左循环移动DelayMS(150);}}038只LED左右来回点亮/* 名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include<reg51.h>#include<intrins.h>#defineucharunsignedchar#defineuintunsignedint//延时voidDelayMS(uintx){uchari;while(x--){for(i=0;i<120;i++);}}//主程序voidmain(){uchari;P2=0x01;while(1){for(i=0;i<7;i++){P2=_crol_(P2,1);//P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1);//P2的值向右循环移动DelayMS(150);}}}04花样流水灯/* 名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#defineucharunsignedchar#defineuintunsignedintucharcodePattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};ucharcodePattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};//延时voidDelayMS(uintx){uchari;while(x--){for(i=0;i<120;i++);}}//主程序voidmain(){uchari;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
51单片机C程序设计100例
《单片机 C 语言程序设计实训 100 例---基于 8051 和 PROTEUS 仿真》案例
//延时 void DelayMS(uint x) { uchar i; while(x--) { for(i=0;i<120;i++); } } //主程序 void main() { P0=0xfe; while(1) { P0=_crol_(P0,1); //P0 的值向左循环移动 DelayMS(150); } } 03 /* 8 只 LED 左右来回点亮 名称：8 只 LED 左右来回点亮 说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果
名称：LED 模拟交通灯 说明：东西向绿灯亮若干秒，黄 灯闪烁 5 次后红灯亮， 红灯亮后，南 北向由红灯变为绿灯，若干秒后南北 向黄灯闪烁 5 此后变红灯，东西向变 绿灯，如此重复。 */ #include<reg51.h> #define uchar unsigned char #define uint unsigned int sbit RED_A=P0^0; //东西向灯 sbit YELLOW_A=P0^1; sbit GREEN_A=P0^2; sbit RED_B=P0^3; //南北向灯 sbit YELLOW_B=P0^4; sbit GREEN_B=P0^5; uchar Flash_Count=0,Operation_Type=1; //闪烁次数，操作类型变量
2 上海师范大学信息与机电工程学院—倪继锋
《单片机 C 语言程序设计实训 100 例---基于 8051 和 PROTEUS 仿真》案例
for(i=0;i<7;i++) { P2=_crol_(P2,1); //P2 的值向左循环移动 DelayMS(150); } for(i=0;i<7;i++) { P2=_cror_(P2,1); //P2 的值向右循环移动 DelayMS(150); } } } 04 /* 花样流水灯
单片机C语言程序设计实训100例
//恢复定时器 1 初值 //500ms 转换状态
名称：10s 的秒表 说明：首次按键计时开始，再次按键暂停，第三次按键清零。
*/ #include<reg51.h> #define uchar unsigned char #define uint unsigned int sbit K1=P3^7; uchar i,Second_Counts,Key_Flag_Idx; bit Key_State; uchar
34 上海师范大学信息与机电工程学院—倪继锋
《单片机 C 语言程序设计实训 100 例---基于 8051 和 PROTEUS 仿真》案例
34 /*
100 000s 以内的计时程序 名称：100 000s 以内的计时程序 说明：在 6 只数码管上完成 0~99 999.9s。
*/ #include<reg51.h> #include<intrins.h> #define uchar unsigned char #define uint unsigned int //段码 ucha 中断函数 void LED_Flash_and_Scroll() interrupt 1 { if(++k<35) return; //定时中断若干次后执行闪烁 k=0; switch(i) { case 0: B1=~B1;break; case 1: G1=~G1;break; case 2: R1=~R1;break; case 3: Y1=~Y1;break; default:i=0; } if(++j<300) return; //每次闪烁持续一段时间 j=0; P0=0xff; //关闭显示 i++; //切换到下一个 LED } 30 /* T0 控制 LED 实现二进制计数
《单片机C语言程序设计实训100例—基于8051+Proteus仿真
《单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例第01 篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intsbit LED=P1^0;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02 从左到右的流水灯/* 名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动DelayMS(150);}}03 8只LED左右来回点亮/* 名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){for(i=0;i<7;i++){P2=_crol_(P2,1); //P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动DelayMS(150);}}}04 花样流水灯/* 名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05 LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
基于8051+PROTEUS仿真100实例
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f, 0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00, 0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
//延时
void DelayMS(uint x)
{
uchar t;
while(x--) for(t=0;t<120;t++);
}
//主程序
单片机C语言程序设计实训100例--基于某8051+PROTEUS仿真1
《单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例第 01 篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intsbit LED=P1^0;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02 从左到右的流水灯/* 名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned intvoid DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动DelayMS(150);}}03 8只LED左右来回点亮/* 名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){{P2=_crol_(P2,1); //P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动DelayMS(150);}}}04 花样流水灯/* 名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#define uchar unsignedchar#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe, 0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f, 0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00, 0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05 LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
单片机C语言程序设计实训100例—基于.8051 Proteus仿真
《基于8051+Proteus仿真》案例第 01 篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intsbit LED=P1^0;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02 从左到右的流水灯/* 名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned intvoid DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动DelayMS(150);}}03 8只LED左右来回点亮/* 名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){{P2=_crol_(P2,1); //P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动DelayMS(150);}}}04 花样流水灯/* 名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#define uchar unsignedchar#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe, 0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f, 0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00, 0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05 LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
单片机c语言程序设计实例100例--基于805i+proteus仿真
以下是一个基于8051单片机和Proteus仿真环境的C语言程序设计实例：实例1：点亮LED灯
在这个例子中，我们将使用C语言编写一个简单的程序来控制8051单片机的一个I/O引脚，使其驱动一个LED灯。
c代码：
要使用Proteus进行仿真，你需要按照以下步骤操作：
1. 打开Proteus软件，创建一个新的设计工程。
2. 在元件库中搜索并添加相应的8051单片机型号（如AT89C51）和LED 元件到工作区。
3. 根据实际硬件连接，正确配置单片机的引脚和LED的连接。
4. 右键单击单片机元件，选择“Edit Component”打开编辑窗口。
5. 在“Program File(s)”区域，点击右侧的浏览按钮，选择你的C语言源文件（如上述的main.c）。
6. 点击“OK”关闭编辑窗口，然后点击工具栏上的“Play”按钮开始仿真。
在仿真过程中，你应该能看到LED灯被点亮，这表明你的C语言程序已经在Proteus环境中成功运行。
以上只是一个基础的例子，实际的"单片机C语言程序设计实例100例--基于8051+Proteus仿真"会包含更复杂和多样化的应用场景，包括定时器/计数器
应用、中断处理、串口通信、ADC/DAC转换、液晶显示等等。
每个实例都会详细介绍程序设计思路、代码实现以及如何在Proteus中进行仿真调试。
通过这些实例的学习和实践，你可以逐步掌握8051单片机的C语言编程技巧和Proteus仿真环境的使用方法。
单片机C语言程序设计实训100例--基于8051+PROTEUS仿真1
单片机C语言程序设计实训100例--基于8051+PROTEUS仿真1单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例目录第一篇基础程序设计 (1)01 闪烁的LED (1)02 从左到右的流水灯 (1)03 8只LED左右来回点亮 (2)04 花样流水灯 (3)05 LED模拟交通灯 (4)06 单只数码管循环显示0~9 (5)07 8只数码管滚动显示单个数字 (6)08 8只数码管动态显示多个不同字符 (7)09 8只数码管闪烁显示数字串 (8)10 8只数码管滚动显示数字串 (9)11 K1-K4 控制LED移位 (10)12 K1-K4 按键状态显示 (11)13 K1-K4 分组控制LED (12)14 K1-K4 控制数码管移位显示 (13)15 K1-K4 控制数码管加减演示 (14)16 4X4矩阵键盘控制条形LED显示 (16)17 数码管显示4X4矩阵键盘按键号 (17)18 开关控制LED (19)19 继电器控制照明设备 (20)20 数码管显示拨码开关编码 (21)21 开关控制报警器 (22)22 按键发音 (22)23 播放音乐 (23)24 INT0中断计数 (24)25 外部INT0中断控制LED (26)26 INT0及INT1中断计数 (26)27 定时器控制单只LED (28)28 TIMER0控制流水灯 (29)29 定时器控制4个LED滚动闪烁 (30)30 T0控制LED实现二进制计数 (31)31 TIMER0与TIMER1控制条形LED (31)。
单片机C语言程序设计实训100例——基于8051+Proteus仿真(前25题)
单片机C语言程序设计实训100例——基于8051+ Proteus仿真01 闪烁的LED/*名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intsbit LED=P10;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02从左到右的流水灯/*名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动DelayMS(150);}}038只LED左右来回点亮/*名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/ #include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){for(i=0;i<7;i++){P2=_crol_(P2,1); //P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动DelayMS(150);}}}04花样流水灯/*名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
单片机C语言程序设计实训100例——基于8051+Proteus仿真(前25题)
单片机C语言程序设计实训100例——基于8051+ Proteus仿真01 闪烁的LED/*名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intsbit LED=P10;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02从左到右的流水灯/*名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){ //int j,i;P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动 //P0=~(1<<j++); DelayMS(150);if(j= =8)j=0; DelayMS(150);}}038只LED左右来回点亮/*名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){for(i=0;i<7;i++){P2=_crol_(P2,1); //P2的值向左循环移动 //p2=~(1<<j++);DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动 // p2=~(1>>j++);}}}04花样流水灯/*名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
51单片机仿真100实例
0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
//延时
voidDelayMS(uintx)
{
uchart;
while(x--)for(t=0;t<120;t++);
}
//主程序
voidmain()
{
uchari,wei=0x80;
while(1)
{
for(i=0;i<8;i++)
{
P2=0xff;//关闭显示
wei=_crol_(wei,1);
sbitRED_A=P0^0;//东西向灯
sbitYELLOW_A=P0^1;
sbitGREEN_A=P0^2;
sbitRED_B=P0^3;//南北向灯
sbitYELLOW_B=P0^4;
sbitGREEN_B=P0^5;
ucharFlash_Count=0,Operation_Type=1;//闪烁次数，操作类型变量
while(x--)
{
for(i=0;i<120;i++);
}
}
//主程序
voidmain()
{
uchari;
while(1)
{//从数组中读取数据送至P0和P2口显示
for(i=0;i<136;i++)
{
P0=Pattern_P0[i];
单片机C语言程序设计实训100例--基于8051+PROTEUS仿真
单片机C语言程序设计实训100例--基于8051+PROTEUS仿真《单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例第01 篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<>#define uchar unsigned char#define uint unsigned intsbit LED=P1^0;.\r\n");Puts_to_SerialPort("-------------------------------\r\n");DelayMS(50);while(1){Putc_to_SerialPort(c+'A');DelayMS(100);Putc_to_SerialPort(' ');DelayMS(100);if(c==25) With PCB layout now offering automation of both component ", "can often be the most time consuming element of the exercise.","And if you use circuit simulation to develop your ideas, ","you are going to spend even more time working on the schematic."};//显示缓冲（2行）uchar Disp_Buffer[32];//垂直滚动显示void V_Scroll_Display(){uchar i,j,k=0;uchar *p=Msg[0];uchar *q=Msg[Line_Count]+strlen(Msg[Line_Count]); //以下仅使用显示缓冲的前16字节空间while(p<q)< p="">{for(i=0;i<16&&p<q;i++)< p="">{ //消除显示缓冲中待显示行首尾可能出现的空格if((i==0||i==15)&&*p==' ') p++;if(*p!='\0'){}else{if(++k>Line_Count) break;p=Msg[k]; //p指向下一串的首地址Disp_Buffer[i]=*p++;}}//不足16个字符时空格补充for(j=i;j<16;j++) Disp_Buffer[j]=' ';//垂直滚动显示while(F0) DelayMS(5);ShowString(0,0," ");DelayMS(150);while(F0) DelayMS(5);ShowString(0,1,Disp_Buffer);DelayMS(150);while(F0) DelayMS(5);ShowString(0,0,Disp_Buffer);ShowString(0,1," ");DelayMS(150);}//最后清屏ShowString(0,0," ");ShowString(0,1," ");}//水平滚动显示void H_Scroll_Display(){uchar i,j,k=0,L=0;uchar *p=Msg[0];uchar *q=Msg[Line_Count]+strlen(Msg[Line_Count]); //将32个字符的显示缓冲前16个字符设为空格for(i=0;i<16;i++) Disp_Buffer[i]=' ';while(p<q)< p="">{//忽略缓冲中首尾可能出现的空格if((i==16||i==31)&&*p==' ') p++;for(i=16;i<32&&p<q;i++)< p="">{if(*p!='\0'){Disp_Buffer[i]=*p++;}elseif(++k>Line_Count) break;p=Msg[k]; //p指向下一串的首地址Disp_Buffer[i]=*p++;}}//不足32个字符时空格补充for(j=i;j<32;j++) Disp_Buffer[j]=' ';//水平滚动显示for(i=0;i<=16;i++){while(F0) DelayMS(5);ShowString(0,L,Disp_Buffer+i);while(F0) DelayMS(5);DelayMS(20);}L=(L==0)1:0; //行号在0，1间交替DelayMS(300);}//如果显示结束时停留在第0行，则清除第1行的内容if(L==1) ShowString(0,1," ");}//外部中断0，由K3控制暂停与继续显示void EX_INT0() interrupt 0{F0=!F0; //暂停与继续显示控制标志位}//主程序void main(){uint Count=0;IE=0x81; //允许外部中断0IT0=1; //下降沿触发F0=0; //暂停与继续显示控制标志位Initialize_LCD();ShowString(0,0,Prompt);ShowString(0,1,Prompt+16);while(1){if(K1==0){V_Scroll_Display();DelayMS(300);}elseif(K2==0)H_Scroll_Display();DelayMS(300);}}}///* 名称：液晶控制与显示程序说明：本程序是通用的1602液晶控制程序。
PROTEUS仿真100实例
《单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例第 01 篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include<reg51.h>#define uchar unsigned char#define uint unsigned intsbit LED=P1^0;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02 从左到右的流水灯/* 名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮.产生走马灯效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned intvoid DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动DelayMS(150);}}03 8只LED左右来回点亮/* 名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include<reg51.h>#include<intrins.h>#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){{P2=_crol_(P2,1); //P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动DelayMS(150);}}}04 花样流水灯/* 名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include<reg51.h>#define uchar unsignedchar#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe, 0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff};uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff, 0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff, 0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f, 0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f, 0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00, 0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05 LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒.黄灯闪烁5次后红灯亮. 红灯亮后.南北向由红灯变为绿灯.若干秒后南北向黄灯闪烁5此后变红灯.东西向变绿灯.如此重复。
单片机C语言程序的设计实训100例--基于8051+PROTEUS仿真1
单片机C语言程序的设计实训100例--基于8051+PROTEUS仿真1《单片机C语言程序设计实训100例—基于8051+Proteus仿真》案例第 01 篇基础程序设计01 闪烁的LED/* 名称：闪烁的LED说明：LED按设定的时间间隔闪烁*/#include#define uchar unsigned char#define uint unsigned intsbit LED=P1^0;//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){while(1){LED=~LED;DelayMS(150);}}02 从左到右的流水灯/* 名称：从左到右的流水灯说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果*/#include#include#define uchar unsigned char#define uint unsigned intvoid DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){P0=0xfe;while(1){P0=_crol_(P0,1); //P0的值向左循环移动DelayMS(150);}}03 8只LED左右来回点亮/* 名称：8只LED左右来回点亮说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果*/#include#include#define uchar unsigned char#define uint unsigned int//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;P2=0x01;while(1){{P2=_crol_(P2,1); //P2的值向左循环移动DelayMS(150);}for(i=0;i<7;i++){P2=_cror_(P2,1); //P2的值向右循环移动DelayMS(150);}}}04 花样流水灯/* 名称：花样流水灯说明：16只LED分两组按预设的多种花样变换显示*/#include#define uchar unsignedchar#define uint unsigned intuchar code Pattern_P0[]={0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0 xff,0xff,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0 x81,0xc3,0xe7,0xff,0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0 x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x 0f,0xf0,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0 xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xf d,0xfe,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x0 0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0 xf0,0xf8,0xfc,0xfe, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff };uchar code Pattern_P2[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x 9f,0x3f,0xff,0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0 x81,0xc3,0xe7,0xff,0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0 x1f,0x3f,0x7f,0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x 0f,0xf0,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0x bf,0x7f,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0 xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x 80,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff, 0xff,0xff, 0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff//延时void DelayMS(uint x){uchar i;while(x--){for(i=0;i<120;i++);}}//主程序void main(){uchar i;while(1){ //从数组中读取数据送至P0和P2口显示for(i=0;i<136;i++){P0=Pattern_P0[i];P2=Pattern_P2[i];DelayMS(100);}}}05 LED模拟交通灯/* 名称：LED模拟交通灯说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮，红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
#include<intrins.h>
#define uchar unsigned char
#define uint unsigned int
//延时
void DelayMS(uint x)
{
uchar i;
while(x--)
{
for(i=0;i<120;i++);
}
}
//主程序
void main()
0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,
《单片机
第
01闪烁的LED
/*名称：闪烁的LED
说明：LED按设定的时间间隔闪烁
*/
#include<reg51.h>
#define uchar unsigned char
#define uint unsigned int
sbit LED=P1^0;
//延时
void DelayMS(uint x)
{
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,
0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
while(1)
{
for(i=0;i<7;i++)
{
P2=_crol_(P2,1); //P2的值向左循环移动
DelayMS(150);
}
for(i=0;i<7;i++)
{
P2=_cror_(P2,1); //P2的值向右循环移动
DelayMS(150);
}
}
}
04花样流水灯
/*名称：花样流水灯
说明：16只LED分两组按预设的多种花样变换显示
0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,
0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,
*/
#include<reg51.h>
#define uchar unsigned char
#define uint unsigned int
uchar code Pattern_P0[]=
{
0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff
};
//延时
void DelayMS(uint x)
{
uchar i;
0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,
while(x--)
{
for(i=0;i<120;i++);
}
}
0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,
0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,
{
P0=0xfe;
while(1)
{
P0=_crol_(P0,1); //P0的值向左循环移动
DelayMS(150);
}
}
038只LED左右来回点亮
/*名称：8只LED左右来回点亮
说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果
*/
#include<reg51.h>
#include<intrins.h>
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,
0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff
};
uchar code Pattern_P2[]=
{
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,
uchar i;
while(x--){ Nhomakorabeafor(i=0;i<120;i++);
}
}
//主程序
void main()
{
while(1)
{
LED=~LED;
DelayMS(150);
}
}
02从左到右的流水灯
/*名称：从左到右的流水灯
说明：接在P0口的8个LED从左到右循环依次点亮，产生走马灯效果
*/
#include<reg51.h>
#define uchar unsigned char
#define uint unsigned int
//延时
void DelayMS(uint x)
{
uchar i;
while(x--)
{
for(i=0;i<120;i++);
}
}
//主程序
void main()
{
uchar i;
P2=0x01;