Beams10e_Ch03
亿佰特WiFi模组选型指南以及WiFi模块应用方案详解
亿佰特WiFi模块选型指南及WiFi模块物联网应用案例成都亿百特电子科技有限公司WiFi类模组分别采用UART 、SDIO、USB三种不同接口，内置IEEE802.11协议栈以及 TCP/IP 协议栈，能够实现用户串口数据到无线网络之间的转换。
1.模组分类选型指导说明1.1 E103系列模组选型指导1.1.1 E103系列模组双频模组E103系列双频模组芯片方案分别采用TI第三代Wi-Fi芯片CC3235S和瑞昱半导体的RTL8811CU-CU-CG而进行研发。
符合IEEE802.11 a/b/g/n标准和IEEE 802.11b/g/n/ac标准，具有丰富的接口和强大的处理器，可为高吞吐量性能的集成无线WLAN设备提供了一种E103-W06 E103-RTL8811CU1.1.2 E103系列WiFi+蓝牙双模模组E103系列WiFi+蓝牙双模模组内置方案较为多元化，因此符合的标准协议也较为丰富，目前拥有蓝牙 5.4/5.2/5.1/5.0+WiFi6/WiFi4等不同标准协议规范类产品，且工作在1.1.3 E103系列超低功耗WiFi模组E103系列低功耗WiFi模组工作在2.4~2.4835GHz 频段，符合IEEE 802.11b/g/n协议标准。
模块集成了透传功能，即拿即用，支持串口 AT 指令集用户通过串口即可使用网络访问的功能，广泛应用于穿戴设备、家庭自动化、家庭安防、个人保健、智能家电、配饰与遥控器、1.1.4 E103系列WiFi路由模组E103系列WiFi路由模组目前拥有两款产品，分别为E103-W20（7688）和 E103-W20（7628）。
该类模块是基于联发科 MT7688AN及 MT7628AN为核心的低成本低功耗的物联网模块。
模块引出了 MT7688AN /MT7628AN的所有接口，支持 OpenWrt 操作系统及自定义开发，具有丰富的接口和强大的处理器，可以广泛的应用于智能设备或云服务应用等，并可以自由进行1.1.5 E103系列通用型模组E103系列通用型模组不仅具有丰富的外设接口，还拥有强大的神经网络运算能力和信号处理能力，成本低，且适用于AloT 领域的多种应用场景，例如唤醒词检测和语音命令识别、E103-RTL8189 E103-W05 E103-W01-IPX E103-W01 E103-W101.1.6 E103系列WiFi mesh模组在 EBYTE 的方案中，我们公司支持WIFI Mesh支持有路由组网和无路由组网的模块为E103-W07，E103-W07是一套建立在Wi-Fi协议之上的网络协议。
Tron 产品说明书
COMPASS01-0226-03GYROTRAC SYSTEM FOC-WO 1.00SET21F COMPASS01-0226-03GYROTRAC SYSTEM FOC-WO 1.00SET PHLIA WIND DATA SYSTEM05106RM YOUNG WIND MONITOR - MA P221-1334 1.00SET XXX WIND DATA SYSTEM05108RM YOUNG WIND MONITOR HD P222-14537.00SET19F WIND DATA SYSTEM06206-27RM YOUNG MARINE WIND TRACKER -110/220VAC P222-1453 3.00SET19F WIND DATA SYSTEM06206-27RM YOUNG MARINE WIND TRACKER -110/220VAC SHAC31 P221-0710 1.00SET SHAC 101700TRON TR30 AIR EMERGENCY VHF AM RADIO P222-0087 1.00SET19F103170EPRIB - TRON 60AIS WITH FLOAT FREE BRACKET P223-0001 4.00SET19F103170EPRIB - TRON 60AIS WITH FLOAT FREE BRACKET P222-0670 1.00SET SHAT1305118DM100 VDR G2P221-1683*3 1.00SET BOND710S-00607SAFESEA S100 SART WITH MOUNTING POLE P222-00748.00SET PHLIA EPIRB8305083050 TRON 40S MKII (WITHOUT BRACKET)FOC-P218-2570 1.00SET19F EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0776 1.00SET19F EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0331 1.00SET GZLF EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0776 2.00SET SHAT EPIRB83310TRON 60S EPIRB W/FF BRACKET P222-0776 1.00SET XXX19 83330TRON 60GPS EPIRB WITH FLOAT FREE BRACKET P222-07767.00SET19F83330TRON 60GPS EPIRB WITH FLOAT FREE BRACKET P222-0776 1.00SET SHAT VHF / UHF87950P221-0958 1.00SET19F VHF / UHF87950P222-067039.00SET19F VHF / UHF87950SHAC26 P221-0014 1.00SET SHAC VHF / UHF87950P221-0631 1.00SET SHAT A45P & E ANEMOMETER P221-1367 1.00SET PANYUAC3161200407222A-00500 SAILOR 7222 VHF DSC Class A P222-0139 3.00SET19FAC3496400C1-70-A00S INTELLIAN C700 CERTUS TERMINAL P221-1117 1.00SET PHLIA AUTOPILOT ALPHAPILOT-IU*AUTOPILOT (CONTACT O/P) CONNECTION TERMINAL (LOCAL MADE)FOC 4.00SET19F GYROCOMPASS CMZ-900B2GYRO COMPASS P222-1289 1.00SET19F ECHO SOUNDER CVS-126KODEN ECHO SOUNDER (600W, 200KHZ, DC24V OPERATION)P221-0821 1.00SET PHLIA ECHO SOUNDER CVS-126KODEN ECHO SOUNDER (600W, 200KHZ, DC24V OPERATION)P222-0118 3.00SET PHLIA ECHO SOUNDER CVS-126KODEN ECHO SOUNDER (600W, 200KHZ, DC24V OPERATION)P222-090520.00SET PHLIA ECHO SOUNDER CVS-128KODEN ECHO SOUNDER(8.4-INCH COLOR LCD)P222-0905 2.00SET19F ECHO SOUNDER CVS-128KODEN ECHO SOUNDER(8.4-INCH COLOR LCD)P222-0905 1.00SET PHLIA ECHO SOUNDER CVS-FX2KODEN DIGITAL BROADBAND ECHO SOUNDER C/W TRANSDUCER & STANDARD ACCESSORIES FOC-WO-P215-1160 1.00SET PHLIA NAVTEX DPU-414-50B-E PRINTER P222-0996 1.00SET DL NAVTEX DPU-414-50B-E PRINTER SHAC21 P219-0539 1.00SET DL NAVTEX DPU-414-50B-E PRINTER SHAC21 P219-0538 1.00SET FZ NAVTEX DPU-414-50B-E PRINTER P219-0538 1.00SET PANYU NAVTEX DPU-414-50B-E PRINTER CONSIGNMENT 1.00SET PHLIA NAVTEX DPU-414-50B-E PRINTER P221-0068 2.00SET PHLIA NAVTEX DPU-414-50B-E PRINTER P222-1020 1.00SET SHAI DT885FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIB P221-014712.00SET19FDT885FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIB ENT-P221-0011 6.00SET SHACDT985FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIC P221-14248.00SET19FDT985FF ENTEL FIRE FIGHTER RADIO (UHF), ATEX IIC P222-118720.00SET19F VHF / UHF DX482ENTEL UHF P218-1451 1.00SET19F VHF / UHF DX482ENTEL UHF P218-1451 2.00SET SHAT VHF / UHF DX482ENTEL UHF P218-1451*2 3.00SET SHAT DX585M-IS UL913 INTRINSICALLY SAFE UFH (NON EU)P222-11417.00SET19F FAX / WEATHER FAX FAX-236BROTHER FAX MACHINE ( AC 220V )FOC-WO-P211-0201 1.00SET21F FAX / WEATHER FAX FAX-236BROTHER FAX MACHINE ( AC 220V )FOC-WO-P211-0201 1.00SET PHLIA VHF / UHF FM8800S*VHF (SECOND HAND)FOC-WO-P215-0960 1.00SET SGP GC80SIMRAD GYRO COMPASS P221-1563 1.00SET PHLIA GPS / DGPS GP-170GPS P222-0649 1.00SET PHLIA PUBLIC ADDRESSER HPA-7300PUBLIC ADDRESSER/ TALK-BACK SYSTEM CONSIGNMENT-PGH270210.70SET PANYU PUBLIC ADDRESSER HPA-9200PUBLIC ADDRESSER/ TALK BACK SYSTEM CONSIGNMENT-PGH27021 1.00SET PANYU VHF / UHF HT544ENTEL HANDHELD VHF (I.S. TYPE) WITH LCD DISPLAY ENT-P220-0003 2.00SET SHAC VHF / UHF HT583(RED-BEZEL)ENTEL I.S. UHF P221-0147 4.00SET19F VHF / UHF HT583(RED-BEZEL)ENTEL I.S. UHF P221-106117.00SET19F VHF / UHF HT583(RED-BEZEL)ENTEL I.S. UHF P221-1061 3.00SET SHAT VHF / UHF HT649-GMDSS/P2ENTEL 2-WAY VHF P222-163411.00SET19F VHF / UHF HT649-GMDSS/P2ENTEL 2-WAY VHF P222-1634 6.00SET SHAT VHF / UHF HT782UHF P221-1424 1.00SET19F VHF / UHF HT782UHF ENT-P220-0003 2.00SET SHAC VHF / UHF HT883ENTEL I.S. UHF P218-12858.00SET19F VHF / UHF HT883ENTEL I.S. UHF ENT-P220-0003 1.00SET SHAC VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-1201 6.00SET13F VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-0235 4.00SET19F VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-0699 4.00SET19F VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF ENT-P220-0003 6.00SET SHAC VHF / UHF HT883(RED-BEZEL)ENTEL I.S. UHF P218-0235 1.00SET SHATVHF / UHF HT982ENTEL I.S. UHF P220-0104 4.00SET19F TELEPHONE HX-26AUTO EXCHANGE TELEPHONE SYSTEM CONSIGNMENT-PGH27021 1.00SET PANYU TELEPHONE HX-72AUTO-TELEPHONE SYSTEM CONSIGNMENT-PGH27021 1.00SET PANYU ECDIS JAN-2000JRC ECDIS FOC-WO-P216-0876 1.00SET PHLIA NECST JAN-470-4ANN NECST CONSIGNMENT 1.00SET PHLIA JAN-5203-26D ROUTE PLANNING SYSTEM, 26", DESK TOP TYPE P220-1749 2.00SET19F ECDIS JAN-701B*ECDIS (SECOND HAND)FOC-WO-P213-1313*10.90SET SHAT FAX / WEATHER FAX JAX-90*WEATHER FAX (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP VDR SVDR JCY-1850*JRC SIMPLIFIED VOYAGE DATA RECORDER (SECOND HAND)FOC-WO-P215-0960 2.00SET SGP ECHO SOUNDER JFC-7050-W/OTD FISH FINDER (WITHOUT TRANSDUCER)FOC-WO-P215-1346 1.00SET PHLIA ECHO SOUNDER JFE-400-25ECHO SOUNDER WITH 200KHZ + 50KHZ DUAL TRANSDUCER (BB TYPE)P222-0682 1.00SET19F ECHO SOUNDER JFE-570S*NAVIGATION ECHO SOUNDER (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP ECHO SOUNDER JFE-680JRC ECHO SOUNDER (WITHOUT TRANSDUCER)P221-0849 1.00SET19F AIS JHS-183AUTOMATIC IDENTIFICATION SYSTEM (AIS)P221-0837 1.00SET19F VHF / UHF JHS-32A*JRC VHF (SECOND HAND)FOC-WO-P213-1313 1.00SET PHLIA VHF / UHF JHS-32A*JRC VHF (SECOND HAND)FOC-WO-P215-0960*10.90SET SGP VHF / UHF JHS-32A*JRC VHF (SECOND HAND)FOC-WO-P215-0960 1.00SET SGP VHF / UHF JHS-32B*VHF/FM RADIOTELEPHONE (SECOND HAND)CONSIGNMENT 1.00SET PHLIA VHF / UHF JHS-7 2 WAY VHF RADIOTELEPHONE P219-1575*1 1.00SET19F GPS / DGPS JLR-21GPS COMPASS P222-0030 1.00SET19F GPS / DGPS JLR-4340GPS RECEIVER GPS-124 (WITH 15M CABLE)P218-0312*2 1.00SET19F GPS / DGPS JLR-7700MKII*GPS NAVIGATOR (SECOND HAND)FOC-WO-P215-0960 1.00SET SGP RADAR JMA-3336RADAR - X-BAND 6KW, 3.9FT OPEN SCANNER 10.4" DISPLAY P222-0318 1.00SET PHLIA JMA-3404JRC MARINE RADAR X-BAND, 4KW DOME SCANNER, 12/24VDC FOC-WO-P220-0946 3.00SET PHLIAJMA-3406JRC MARINE RADAR X-BAND, 6KW OPEN SCANNER, 12/24VDC P220-0946 1.00SET PHLIA RADAR JMR-9225-6XC X-BAND COLOR RADAR, 6FT ANTENNA OUTPUT POWER: 25KW STAND-ALONE TYPE P222-0744 1.00SET21F RADAR JMR-9225-6XC X-BAND COLOR RADAR, 6FT ANTENNA OUTPUT POWER: 25KW STAND-ALONE TYPE P222-0744 1.00SET BOND RADAR JMR-9230-SC S-BAND COLOR RADAR, 12FT ANTENNA OUTPUT POWER: 30KW STAND-ALONE TYPE P222-06990.90SET21F RADAR JMR-9230-SC S-BAND COLOR RADAR, 12FT ANTENNA OUTPUT POWER: 30KW STAND-ALONE TYPE P222-0170 1.00SET BOND RADAR JMR-9230-SC S-BAND COLOR RADAR, 12FT ANTENNA OUTPUT POWER: 30KW STAND-ALONE TYPE P222-06990.10SET GD MF/HF RADIO JSB-196GM*150W MHF/HF SSB RADIOTELEPHONE (SECOND HAND)FOC-P215-0960*1 1.00SET SGP INMARSAT JUE-85*INMARSAT-C MARINE MOBILE EARTH STATION (SECOND HAND)FOC-WO-P215-09600.90SET SGP INMARSAT JUE-95SA INMARSAT MINI-C MARINE MOBILE EARTH STATION P222-0682 1.00SET19F AIS KAT-100KODEN AIS TRANSCEIVER (DC OPERATION)P218-19660.50SET PHLIA KAT-330KODEN AIS TRANSCEIVER P222-0118 1.00SET19FKAT-330KODEN AIS TRANSCEIVER P222-0118 2.00SET PHLIAKAT-330KODEN AIS TRANSCEIVER P222-0905 6.00SET PHLIA ECHO SOUNDER KDS-6000BB KODEN DIGITAL BROADBAND SEARCH LIGHT SONAR P222-1707 2.00PC1PHLIA GPS / DGPS KGP-915KODEN GPS GLONASS P222-0905 3.00SET19F GPS / DGPS KGP-915KODEN GPS GLONASS P221-0821 2.00SET PHLIA GPS / DGPS KGP-915KODEN GPS GLONASS P222-0905 2.00SET PHLIA GPS / DGPS KGP-922GPS NAVIGATOR P222-0118 1.00SET19F GPS / DGPS KGP-922GPS NAVIGATOR P222-0118 1.00SET PHLIA GPS / DGPS KTN-70A PLOTTER P216-1791 1.00PC1PHJUN GPS / DGPS KTN-70A PLOTTER P219-172215.00PC1PHLIA RADAR MDC-204010.4-INCH COLOR LCD MARINE RADAR FOC-WO-P220-0861 2.00PC1PHLIA RADAR MDC-7912P-6X-BAND RADAR P222-1023 2.00SET19F RADAR MDC-7912P-6X-BAND RADAR P222-1023 2.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-0905 3.00SET19F RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P220-0294*10.90SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P219-0298 1.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-0118 1.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-170712.00SET PHLIA RADAR MDC-941A KODEN 8.4 INCH COLOUR RADAR WITH 25" RADOME P222-090514.00SET PHLIA COMPASS MS-100MAGNETIC COMPASS A/D CONVERTOR FOC-WO-P210-0101 1.00SET21F COMPASS MS-100MAGNETIC COMPASS A/D CONVERTOR FOC-WO-P210-0261 2.00SET21F VHF / UHF NCM-1770-E CONTROLLER SHAC14 P219-1237*1 2.00SET SHAC NAVTEX NCR-333NAVTEX RECEIVER P222-1108 2.00SET19F NAVTEX NCR-333NAVTEX RECEIVER P219-1511*20.20SET PHLIA NAVTEX NCR-333NAVTEX RECEIVER P220-1728*10.80SET PHLIA NAVTEX NCR-333*NAVTEX RECEIVER (SECOND HAND)FOC-WO-P215-0960 2.00SET SGP NEB-2000NSR EPRIB WITH AIS P222-129515.00SET PHLIANEB-2000C NSR EPRIB P222-0737*10.90SET PHLIANEB-2000C NSR EPRIB P222-0737 1.00SET PHLIA VHF / UHF NKG-52*PRINTER (SECOND HAND)FOC-P215-0960 1.00PC1SGP NKG900A NKG-900 PRINTER P222-0682 1.00PC19FNKG900A NKG-900 PRINTER P222-04918.00PC19FNKG900A NKG-900 PRINTER P222-0144 1.00PC SHAT ECHO SOUNDER NKG-901PRINTER (FLUSH MOUNT)P222-0597 2.00PC119F ECHO SOUNDER NKG-91PRINTER (FLUSH MOUNT) REFER TO NKG-901FOC 1.00PC119FRADAR NRT-1000RADAR SART P222-0737 3.00SET PHLIA AIS NTE-183-E AIS TRANSPONDER SHAC30 P220-0605*1 1.00SET DL VHF / UHF NTE-770S-E VHF TRANSCEIVER SHAC13 P219-1237*1 2.00SET SHAC NVR-3000VHF P222-1386 2.00SET19F VDR SVDR NW-6000NETWAVE VDR P219-2455*5 1.00SET19F AUTOPILOT PR-8000*TOKIMEC AUTOPILOT (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP AUTOPILOT PT900AWOCMZ900S AUTOPILOT (WITHOUT CMZ-900S)P218-1659*1 1.00SET21F AIS R4*AIS (SECOND HAND)FOC-P215-0960 2.00PC1SGP AUTOPILOT RFU ANSCHUTZ (FEEDBACK UNIT) WITH LINKAGE FOR NP60FOC 1.00SET19F AUTOPILOT RFU ANSCHUTZ (FEEDBACK UNIT) WITH LINKAGE FOR NP60FOC-P218-1009 1.00SET19F VHF / UHF RT5022*SAILOR RT5022 VHF DSC (2nd HAND)CONSIGNMENT 1.00SET SGP GYROCOMPASS TG-5000*TOKIMEC GYROCOMPASS (SECOND HAND)FOC-P215-0960 1.00SET SGP GYROCOMPASS TG-5000*TOKIMEC GYROCOMPASS (SECOND HAND)FOC-WO-P213-1313 1.00SET SGP VHF / UHF TLKR8PACKAGE C/W RECHARGABLE BATTERY, BATTERY CHARGER, EARBUD & USER MANUAL FOC-WO-P213-0004 2.00SET21F TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-0087 1.00SET19F TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-195530.00SET19F TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-0087 2.00SET DL TRANSPONDER TRONSART20JOTRON RADAR TRANSPONDER P222-0087 2.00SET PANYU。
ArenaMatch Utility 小前景 补声扬声器 AMU105 AMU108 AMU206
规范信息
本产品符合所有适用的欧盟指令要求。您可以从网站 /compliance 找到完整的符合性声明。
此符号表示不得将此产品作为生活垃圾丢弃，应将其送到合适的 回收站点进行回收。正确处理和回收有助于保护自然资源、人类 健康和环境。想要获得更多关于此产品的处理和回收的信息，请 联系当地市政当局、垃圾处理服务部门或您购买此产品的商店。
中国危险物质限用表
有毒或有害物质或元素名称及成分
有毒或有害物质和元素
零件名称
铅
汞
(Pb) (Hg)
镉 ()
六价铬 (CR(VI))
多溴化 联苯 (PBB)
印刷电路板 X
O
O
O
O
金属零件
X
O
O
O
O
塑料零件
O
O
O
O
O
扬声器
X
O
O
O
O
线缆
X
O
O
O
O
此表格依据 SJ/T 11364 的要求制定。
O：表示此零件中所有均质材料所包含的此类有毒或有害物质均低于 GB/T 26572 中的限定要求。
6. 只能使用制造商指定的附件/配件。
7.
只能使用制造商指定或随本设备一起销售的推车、支架、
三角架、托架或工作台。如果使用推车，则在移动推车/设
备时应格外小心，以免因倾倒而造成伤害。
警告/小心：
包含可能导致窒息危险的小部件。不适合 3 岁以下的儿童使用。
本产品含有磁性材料。有关这是否会影响到您的植入式医疗器 械，请咨询您的医生。
包装清单................................................................................................................................................................................................... 5 可选配件................................................................................................................................................................................................... 5 检查和维护....................................................................................................................................................................................................... 6 保持防风雨性........................................................................................................................................................................................... 6 推荐使用的工具.............................................................................................................................................................................................. 6 产品尺寸........................................................................................................................................................................................................... 7 ArenaMatch Utility AMU105........................................................................................................................................................... 7 ArenaMatch Utility AMU108........................................................................................................................................................... 8 ArenaMatch Utility AMU206.......................................................................................................................................................... 9 ArenaMatch Utility AMU208........................................................................................................................................................ 10
Sennheiser Evolution Wireless Digital EW-DX SK-SKM
DELIVERY INCLUDES• EW-DX EM 2 rack receiver • EW-DX SK bodypack transmitter • EW-DX SKM-S • 2 rod antennas• power supply with country adapters • GA 3 rackmount set • 4 rubber feet• 2 BA 70 rechargeable battery packs • quick guide • safety guide• manufacturer declaration sheetFEATURES EW-DX EM 2• 2 channel half rack (9.5’)• Up to 88 MHz switching bandwidth • PoE IEEE 802.3af Class 3• Equidistant Channel Spacing: 146 channels in standardmode; 293 channels in Link Density Mode • Network enabled for control with Sennheiser ControlCockpit/media control system through a number of 3rd party modules • Clear and easy focused user interface with OLED dis-play • Ethernet connectivity (IPv4 and IPv6)• Secure AES 256 encryption • External PSU 12V/1A •All-metal housingFlexibility for Those Who Want to Choose the Capsule That Best Meets Their NeedsWireless bodypack base set consisting of 1 x EW-DX SKM-S (handheld with mute switch), 1 x EW-DX SK (wirelessbodypack transmitter), 1 x EW-DX EM 2 rackmout receiver (2 channels) and 2 x BA 70 rechargeable batteries. Microphone capsules are sold separately.PRODUCT VARIANTSEW-DX SK-SKM-S BASE SET (Q1-9)470.2 - 550 MHz Art. no. 509462EW-DX SK-SKM-S BASE SET (R1-9)520 - 607.8 MHz Art. no. 509463EW-DX SK-SKM-S BASE SET (S1-10)606.2 - 693.8 MHz Art. no. 509464EW-DX SK-SKM-S BASE SET (S2-10)614.2 - 693.8 MHz Art. no. 509467EW-DX SK-SKM-S BASE SET (S4-10)630 - 693.8 MHzArt. no. 509468EW-DX SK-SKM-S BASE SET (U1/5)823.2 - 831.8 MHz & 863.2 - 864.8 MHz Art. no. 509469EW-DX SK-SKM-S BASE SET (V3-4)925.2 - 937.3 MHzArt. no. 509471EW-DX SK-SKM-S BASE SET (V5-7)941.7 - 951.8 MHz & 953.05 - 956.05 MHz & 956.65 - 959.65 MHz Art. no. 509472EW-DX SK-SKM-S BASE SET (Y1-3)1785.2 - 1799.8 MHzArt. no. 509475FEATURES EW-DX SKM-S• 10mW RF power with up to 100m/328ft working range • Charging contacts for in-device charging with CHG 70N • Persistent eInk display - parameters visible on screeneven when device is not powered on • Programmable mute switch on EW-DX SKM-S - custo-mize the device depending on your professional needs • Function buttons - control all the transmitter settingsdirectly from handheld microphone • Extended runtime with lithium-ion batteries - up to 12hours operation time • Standard capsule interface - compatible with a widerange of Sennheiser and Neumann capsules • Mic input trim control • Metal housingFEATURES EW-DX SK• 3,5 mm jack• 10mW RF power with up to 100m/328ft working range • Charging contacts for in-device charging with CHG 70N • Persistent eInk display - parameters visible on screeneven when device is not powered on • Programmable mute switch - customize the devicedepending on your professional needs • Extended runtime with lithium ion batteries - up to 12hours operation time • Mic input trim control • Metal housingACCESSORIESEW-D ASA (Q-R-S)Active Antenna Splitter470 - 694 MHz Art. no. 508879 EW-D ASA (T-U-V-W)Active Antenna Splitter694 - 1075 MHz Art. no. 508880 EW-D ASA (X-Y)Active Antenna Splitter1350 - 1805 MHz Art. no. 508881 EW-D ASA CN/ANZ (Q-R-S)Active Antenna Splitter470 - 694 MHz Art. no. 508998EW-D AB (Q)Antenna Booster470 - 550 MHz Art. no. 508873 EW-D AB (R)Antenna Booster520 - 608 MHz Art. no. 508874 EW-D AB (S)Antenna Booster606 - 694 MHz Art. no. 508875 EW-D AB (U)Antenna Booster823 - 865 MHz Art. no. 508876 EW-D AB (V)Antenna Booster902 - 960 MHz Art. no. 508877 EW-D AB (Y)Antenna Booster1785 - 1805 MHz Art. no. 508878ADP UHF (470 - 1075 MHz)Passive directional antenna470 - 1075 MHz Art. no. 508863BA 70Rechargeable battery pack for SK and SKM-S Art. no. 508860 L 70 USB Charger for BA 70 rechargeable battery pack Art. no. 508861 EW-D CHARGING SET Set of L 70 USB charger and 2 BA 70 rechargeable battery packs Art. no. 508862 CHG 70N Network-enabled charger for SK, SKM and BA 70Art. no. 509455 CHG 70N + PSU KIT CHG 70N charger with NT 12-35 CS power supply unit Art. no. 509456 EW-D COLOR CODING SET Colored labels for wireless link identification for EM, SKM-S, SK Art. no. 508989 EW-D SK COLOR CODING Colored labels for wireless link identification for SK Art. no. 508990 EW-D SKM COLOR CODING Colored labels for wireless link identification for SKM-S Art. no. 508991 EW-D EM COLOR CODING Colored labels for wireless link identification for EM Art. no. 508992MICROPHONE COMPATIBILITYLavalier and headset microphones compatible with the EW-DX SK bodypack transmitterME 2Omni-directional lavalier microphoneModels produced from 2021 onward, featuring a gold-plated connector*ME 4Cardioid lavalier microphoneModels produced from 2021 onward, featuring a gold-plated connector*MKE Essential Omni Omni-directional lavalier microphoneMKE 2 Gold Omni-directional lavalier microphoneModels produced from 2018 onward, featuring a blue serial number plateMKE 1Omni-directional lavalier microphoneME 3Cardioid headset microphoneModels produced from 2021 onward, featuring a gold-plated connector*HSP Essential Omni Omni-directional headset microphoneHSP 2Omni-directional headset microphoneModels produced from March 2020 onward (featuring code 1090 or later)HS 2Omni-directional headset microphoneModels produced from 2021 onward, featuring a gold-plated connector*SL Headmic 1Omni-directional headset microphone* Models produced prior to 2021 will feature a nickel connector. Earlier models may pick up noise when placed close to the transmitter and are not recommended for useMicrophone modules compatible with the EW-DX SKM-S handheld transmitterMMD 835-1Dynamic microphone module with cardioid polar patternMMD 845-1Dynamic microphone module with supercardioid polar patternMME 865-1Pre-polarized condenser microphone module with supercardioid polar patternMMD 935-1Dynamic microphone module with cardioid polar patternMMD 945-1Dynamic microphone module with supercardioid polar patternMMK 965-1Condenser microphone module with switchable cardioid and supercardioid polar pattern MMD 42-1Dynamic microphone module with omni-directional polar patternNeumann KK 204Condenser microphone module with cardioid polar patternNeumann KK 205Condenser microphone module with supercardioid polar patternMM 435Dynamic microphone module with cardioid polar patternMM 445Dynamic microphone module with supercardioid polar patternME 9002Pre-polarized condenser microphone module with omni-directional polar patternME 9004Pre-polarized condenser microphone module with cardioid polar patternME 9005Pre-polarized condenser microphone module with supercardioid polar patternSPECIFICATIONS SystemAudio link frequency ranges Q1-6R1-6R4-9S1-7S4-7S7-10U1/5V3-4Y1-3470.2 - 526 MHz520 - 576 MHz552 - 607.8 MHz606.2 - 662 MHz630 - 662 MHz662 - 693.8 MHz823.2 - 831.8 MHz &863.2 - 864.8 MHz925.2 - 937.3 MHz1785.2 - 1799.8 MHzBluetooth® Low Energy(BLE) frequency range2402 - 2480 MHzAudio frequency response20 Hz - 20 kHz (-3 dB)@ 3 dBfsAudio THD≤ -60 dB for 1 kHz@ -3 dBfs input level Dynamic range134 dBSystem latency 1.9 msOperating temperature-10 °C - +55 °C(14 °F - 131 °F)Relative humidity 5 - 95 % (non-condensing)EW-DX EM 2 (Rack Receiver)Input voltage11 - 13 V ⎓orPoE IEEE 802.3af Class 0(CAT5e or higher)Input current≤ 1 ATransmit power(radiated)BLE: max. 10 mW EIRP Audio output power18 dBu max.Headphone output2x 70 mW @ 32 ΩEthernet RJ-45 socket, IEEE802.3100Base-TX (half+full duplex)10Base-T (half+full duplex)(CAT5e or higher) Dimensions212 x 44 x 189 mm(8.35" x 1.73" x 7.44") Weight approx. 1000 g (2.2 l bs)(without antennas and powersupply)EW-DX SKM-S (Handheld Transmitter)Input voltage 2.0 - 4.35 VInput current< 300 mAPower supply 2 AA batteries 1.5 V(alkali manganese) orBA 70 rechargeablebattery packOccupied bandwidth200 kHzTransmit power (radiated)Audio link: 10 mW ERP(Range Y1-3: 12 mW ERP)LD mode: 10 mW ERPBLE: max. 10 mW EIRP Dimensions (ø x l)(incl. MMD 835 microphonemodule)(without microphonemodule)50 x 268 mm (1.97" x 10.55")40 x 200 mm (1.57" x 7.87")Weight (without batteries)(incl. MMD 835 microphonemodule)(without microphonemodule)approx. 304 g (0.67 l bs)approx. 195 g (7.14 lbs)EW-DX SK (Bodypack Transmitter)Input voltage 2.0 - 4.35 VInput current< 300 mAPower supply 2 AA batteries 1.5 V(alkali manganese) orBA 70 rechargeablebattery packOccupied bandwidth200 kHzTransmit power (radiated)Audio link: 10 mW ERP(Range Y1-3: 12 mW ERP)LD mode: 10 mW ERPBLE: max. 10 mW EIRP Dimensions (without anten-na)63.5 x 85 x 20 mm(2.5" x 3.35" x 0.79") Weight (without batteries)approx. 115-120 g(0.26-0,27 - l bs)EW-DX EM 2DIMENSIONSDIMENSIONS EW-DX SK5907611785-1800 MHZ 203.8 / 8.02"590758941-960 MHZ 157.8 / 6.21"590757925-938 MHZ157.8 / 6.21"590756823-832 MHZ & 863-865 MHZ166.2 / 6.54"590755630-694 MHZ 195.8 / 7.71"590754614-694 MHZ195.8 / 7.71"590753606-638 MHZ & 650-694 MHZ195.8 / 7.71"590752606-694 MHZ 195.8 / 7.71"590751520-608 MHZ 217.8 / 8.57"470-550 MHZ 231.8 / 9.13"Teile-Nr.Part no.Frequenzbereich Frequency rangeL590750DIMENSIONS 40.31.59Mikrofonmodul MMD835 - nur Beispiel microphon module MMD835 - example only341.34268.510.5750.51.99200.77.9156.56.16EW-DX SKM-SARCHITECT‘S SPECIFICATIONEW-DX EM 2 rack receiverThe stationary two-channel receiver with switching diver-sity technology shall be for use with up to two companion transmitters as part of a digital wireless RF transmission system.The receiver shall operate within the following UHF fre-quency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depending on country-specific regulations.The receiver shall feature Bluetooth® Low Energy (BLE) at a frequency range between 2402 and 2480 MHz for remote controlling the devices via a control App for iOS and And-roid.The receiver shall feature an automatic frequency setup function with spectrum scan functionality in order to es-tablish an equidistant frequency grid with 146 channels in standard mode and 293 channels in Link Density Mode. The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤****************************************** shall be 134 dB. System latency shall be 1.9 ms.The receiver shall be menu-driven with an OLED display showing the current frequency, channel number, metering of RF level, metering of AF level, lock status, muting fun-ction, antenna switching diversity, app connection, gain, audio output level, menu and battery status for each of the two associated transmitters. An auto-lock feature shallbe provided to prevent settings from being accidentally altered.The following settings shall be configurable by function buttons and an encoder for each channel in the menu: frequency, channel name, gain, trim, AF output, low cut, AES 256 encryption, test tone, network settings, integrated antenna booster settings, display brightness, device name, auto setup settings for automatic frequency setup.For each of the two channels the receiver shall feature a balanced XLR-3M audio output with a maximum outputof +18 dBu along with an unbalanced 6.3 mm (¼“) audio output with a maximum output of +12 dBu.For secure transmission the receiver shall feature AES 256 encryption.The receiver shall provide a walktest mode for monitoring the RF and AF signal status in the location over time.Two BNC-type input sockets shall be provided for connec-ting the antennas. The receiver shall be usable with active and passive wide range UHF antennas for the entire sup-ported RF spectrum.A headphone output with headphone volume control shall be provided and shall utilize a 6.3 mm stereo jack socket. The receiver shall have an Ethernet port (RJ-45) for remote network-based monitoring and control using the Sennhei-ser Control Cockpit software or the Sennheiser Wireless Systems Manager software.The receiver shall operate on 12 V DC power supplied from the power supply unit or on Power over Ethernet (PoE IEEE 802.af Class 0). Power consumption shall be ≤ 1 A.The receiver shall have a rugged metal housing; dimensi-ons shall be approximately 212 x 44 x 206 mm (8.35“ x 1.73“ x 8.11“). Weight shall be approximately 1000 grams (2.2 lbs) without antennas and power supply. Operating tempera-ture shall range from −10 °C to +50 °C (+14 °F to +122 °F). The receiver shall be the Sennheiser EW-DX EM 2.EW-DX SK bodypack transmitterThe bodypack transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmission system.The bodypack transmitter shall operate within the follo-wing UHF frequency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2 – 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depending on country-specific regulations.The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤****************************************** shall be 134 dB. System latency shall be 1.9 ms. Occupied bandwidth shall be 200 kHz. Transmit power (radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range:12 mW ERP).A programmable mute switch shall be provided for muting or unmuting either the audio signal or the radio signal. The mute switch can also be deactivated.The bodypack transmitter shall be menu-driven with a backlit eInk display showing the relevant status informati-on such as frequency, battery status or AES 256 encrypti-on status.All transmitter parameters shall be adjustable with functi-on buttons on the device itself or by Bluetooth Low Energy (BLE) synchronization via the associated receiver. The fun-ction buttons shall be lockable against accidental misuse. Power shall be supplied to the bodypack transmitter by two 1.5 V AA size batteries or by one Sennheiser BA 70 rechargeable battery pack. Operating time shall be typical-ly 12 hours with a battery pack and up to 8 hours with AA batteries.The bodypack transmitter shall feature charging contacts for direct charging of the transmitter with inserted BA 70 battery pack in a Sennheiser CHG 70N network-enabled charger.The bodypack transmitter’s microphone/line input shall utilize a lockable 3.5 mm Jack socket.The bodypack transmitter shall be compatible with micro-phones for every application: Sennheiser lavalier micro-phones ME 2, ME 4, MKE 1, MKE 2 Gold and MKE Essential Omni, Sennheiser headset microphones HS 2, HSP 2, HSP Essential Omni, ME 3 and SL Headmic 1.The bodypack transmitter shall have a rugged metal housing; dimensions shall be approximately 63.5 x 85 x 20 mm (2.5” x 3.35” x 0.79“). Weight without batteries shall be approximately 115 - 120 grams depending on antenna length. Operating temperature shall range from −10 °C to +50 °C (+14 °F to +122 °F).The handheld transmitter shall be the SennheiserEW-DX SK.EW-DX SKM-S handheld transmitterThe handheld transmitter shall be for use with a compa-nion receiver as part of a digital wireless RF transmission system.The handheld transmitter shall operate within the following UHF frequency ranges, with a switching bandwidth of up to 88 MHz: 470.2 – 550 MHz, 520 – 607.8 MHz, 606.2 – 693.8 MHz, 614.2 – 693.8 MHz, 630 – 693.8 MHz, 823.2– 831.8 MHz, 863.2 – 846.8 MHz, 925.2 – 937.3 MHz, 941.7 – 951.8 MHz, 953.05 – 956.05 MHz, 956.65 – 959.65 MHz, 1785.2 – 1799.8 MHz. Different frequency variants shall be available depending on country-specific regulations.The audio frequency response shall be between 20 Hz and 20 kHz (-3 dB). Audio total harmonic distortion (THD) shall be≤****************************************** shall be 134 dB. System latency shall be 1.9 ms. Occupied bandwidth shall be 200 kHz. Transmit power (radiated) shall be 10 mW ERP (1785.2 – 1799.8 MHz Range:12 mW ERP).A programmable mute switch shall be provided for muting or unmuting either the audio signal or the radio signal. The mute switch can also be deactivated.The handheld transmitter shall be menu-driven with a backlit eInk display showing the relevant status informati-on such as frequency, battery status or AES 256 encrypti-on status.All transmitter parameters shall be adjustable with functi-on buttons on the device itself or by Bluetooth Low Energy (BLE) synchronization via the associated receiver. The fun-ction buttons shall be lockable against accidental misuse. Power shall be supplied to the handheld transmitter by two 1.5 V AA size batteries or by one Sennheiser BA 70 rechar-geable battery pack. Operating time shall be typically12 hours with a battery pack and up to 8 hours with AA batteries.The handheld transmitter shall feature charging contacts for direct charging of the transmitter with inserted BA 70 battery pack in a Sennheiser CHG 70N network-enabled charger.The handheld transmitter shall utilize Sennheiser’s stan-dard capsule interface serving Sennheiser microphone modules of the evolution wireless and 2000 series and Digital 6000 and 9000 as well as the Neumann KK 204 / 205 microphone modules.The handheld transmitter shall have a rugged metal housing; dimensions shall be approximately 50 mm (1.97“) in diameter and 268 mm (10.55“) in length including a Sennheiser MMD 835 microphone module. Weight inclu-ding MMD 835 microphone module shall be approximately 304 grams (0.67 lbs). Operating temperature shall range from −10 °C to +50 °C (+14 °F to +122 °F).The handheld transmitter shall be the SennheiserEW-DX SKM-S.Sennheiser electronic GmbH & Co. KG · Am Labor 1 · 30900 Wedemark · Germany · 。
埃科姆平板电脑Ex03配置和监视助手手册说明书
03 Configuration and Monitoring AssistantPRODUCT OVERVIEWTab-Ex 02 DZ1Tab-EX 03 DZ2The Ecom Tab-Ex 03 is an easy-to-use wireless tablet for configuration and monitoring of nVent RAYCHEM NGC-20 and Elexant 5010i field controllers. The tablet has an intuitive user interface eliminating the need for extensive training. The tablet is available in two versions: For Zone 2 (Zone 22) use theTab-EX 03 DZ2. For Zone 1 (Zone 21) use the Tab-Ex 02 DZ1. Hardware designThe devices are designed for high productivity in an industrial environment. They are protected against humidity, dust, corrosion and extreme ambient temperatures. The tablet has an 8" TFT display.SoftwareThe application on the tablet is designed to provide full configuration and monitoring capabilities of the controllers. The tablets allow wireless connectivity via Bluetooth® to any nVent RAYCHEM NGC-20 and Elexant 5010i control unit within range. The devices are based on Samsung technology and are running Android operating system.PRODUCT SPECIFICATIONS/RAYCHEM | 1/RAYCHEM | 2©2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice. RAYCHEM-DS-EU2050-EcomTabEx03-EN-2207Our powerful portfolio of brands:North AmericaTel +1.800.545.6258Fax +1.800.527.5703**********************Europe, Middle East, AfricaTel +32.16.213.502Fax +32.16.213.604**********************Asia PacificTel +86.21.2412.1688Fax +86.21.5426.3167*************************Latin AmericaTel +1.713.868.4800Fax +1.713.868.2333**********************APPROVALS Ecom Tab-EX 03 DZ 2Ecom Tab-EX 02 DZ 1For use in ordinary and hazardous area Zone 2 (Gas) and Zone 22 (Dust)For use in ordinary and hazardous areaZone 1 and Zone 2 (Gas), Zone 21 and Zone 22 (Dust)Product certificationMore details about product certification, approvals and conditions of safe use are available in the installation manual at /RAYCHEMORDERING INFORMATION。
安全点输出模块1738系列安装说明书
Publication 1738-IN001C-EN-E - June 2005Installation InstructionsArmorPoint 24V dc Output Modules, Series ACatalog Numbers 1738-OB8EM23, 1738-OB8EM12,1738-OB8EM8, 1738-OB4EM12, 1738-OB4EM8, 1738-OB2EM12, 1738-OB2EPM12, 1738-OV4EM12The ArmorPoint I/O family consists of modular I/O modules. The sealed IP67 housing of these modules requires no enclosure. (Note that environmental requirements other than IP67 may require anadditional appropriate housing.) I/O connectors are sealed M8 (pico) or M12 (micro) or M23 styles. The mounting base ships with the module. The 1738-OB8EM23, 1738-OB8EM12, and 1738-OB8EM8 modules are shown below.M12-DM8-AM8-GM8-CM8-E2 ArmorPoint 24V dc Output Modules, Series A.Important User InformationSolid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (Publication SGI-1.1 available from your local Rockwell Automation sales office or online at) describes some important differences between solid state equipment and hard-wired electromechanical devices. Because of this difference, and also because of the wide variety of uses for solid state equipment, all persons responsible for applying this equipment must satisfy themselves that each intended application of this equipment is acceptable.In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of this equipment.The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variables and requirements associated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples and diagrams.No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this manual.Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc. is prohibited.Throughout this manual we use notes to make you aware of safety considerations.Publication 1738-IN001C-EN-E - June 2005ArmorPoint 24V dc Output Modules, Series A 3Environment and EnclosureThis equipment is intended for use in overvoltage Category II applications (as defined in IEC publication 60664-1), at altitudes up to 2000 meters without derating.This equipment is considered Group 1, Class A industrial equipment according to IEC/CISPR Publication 11. Without appropriate precautions, there may be potential difficulties ensuring electromagnetic compatibility in other environments due to conducted as well as radiated disturbance. This equipment is supplied as ‘enclosed’equipment. It should not require additional system enclosure when used in locations consistent with the enclosure type ratings stated in the Specifications section of this publication. Subsequent sections of this publication may contain additional information regarding specific enclosure type ratings, beyond what this product provides, that are required to comply with certain product safety certifications.NOTE: See NEMA Standards publication 250 and IEC publication 60529, as applicable, for explanations of the degrees of protection provided by different types of enclosure. Also, see the appropriate sections in this publication, as well as the Allen-Bradley publication 1770-4.1 (Industrial Automation Wiring and Grounding Guidelines), for additional installation requirements pertaining to this equipment.Publication 1738-IN001C-EN-E - June 2005Publication 1738-IN001C-EN-E - June 20054 ArmorPoint 24V dc Output Modules, Series AMount the I/O BaseTo mount the I/O base on a wall or panel, use the screw holes provided in the base.Refer to the Drilling Dimensions illustration of the base with an adapter to help you mount the base.Preventing Electrostatic DischargeThis equipment is sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Follow these guidelines when you handle this equipment:•Touch a grounded object to discharge potential static.•Wear an approved grounding wriststrap.•Do not touch connectors or pins on component boards.•Do not touch circuit components inside the equipment.•If available, use a static-safe workstation.•When not in use, store the equipment in appropriate static-safe packaging.The module must be mounted on a grounded metal mounting plate or other conductive surface.Drilling dimensionsArmorPoint 24V dc Output Modules, Series A 5Install the mounting base as follows:y out the required points as shown above in the drillingdimensions drawing.2.Drill the necessary holes for #8 (M4) machine or self-tappingscrews.3.Mount the base using #8 (M4) screws.4.Ground the system using the ground lug connection.The ground lug connection is also a mounting hole.Mounting basePublication 1738-IN001C-EN-E - June 20056 ArmorPoint 24V dc Output Modules, Series AInstall the ArmorPoint Digital Output Module To install the ArmorPoint digital output module, proceed as follows.ing a bladed screwdriver, rotate the keyswitch on themounting base clockwise until the number 1 aligns with thenotch in the base.2.Position the module vertically above the mounting base.The module bridges two bases.3.Push the module down until it engages the latching mechanism.You hear a clicking sound when the module is properlyengaged.The locking mechanism locks the module to the base. Remove the Module From the Mounting BaseTo remove the module from the mounting base:1.Put a flat blade screwdriver into the slot of the orange latchingmechanism.2.Push the screwdriver toward the I/O module to disengage thelatch.The module lifts up off the base.3.Pull the module off of the base.Publication 1738-IN001C-EN-E - June 2005Publication 1738-IN001C-EN-E - June 2005ArmorPoint 24V dc Output Modules, Series A 7Wire the ModulesFollowing are wiring instructions for the ArmorPoint digital output modules.1738-OB2EM12, 1738-OB2EPM12, 1738-OV4EM12, and1738-OB4EM8 and 1738-OB8EM8(view into connector) Pin 1 -24V dc Pin 2 -No Connect Pin 3 -CommonPin 4 - Output 0 (M12-A)Output 1 (M12-B)Output 2 (M12-C) (1738-OV4EM12 and-OB4EM12 only) Output 3 (M12-D) (1738-OV4EM12 and-OB4EM12 only)Pin 5 -No Connect(view into connector) Pin 1 -24V dc Pin 3 -CommonPin 4 -Output 0 (M8-A)Output 1 (M8-B) Output 2 (M8-C) Output 3 (M8-D)Output 4 (M8-E) (1738-OB8EM8 module only) Output 5 (M8-F) (1738-OB8EM8 module only) Output 6 (M8-G) (1738-OB8EM8 module only) Output 7 (M8-H) (1738-OB8EM8 module only)(view into connector) Pin 1 -24V dcPin 2 -Output 1 (M12-A)Pin 4 -Output 0 (M12-A)Output 3 (M12-B)Output 2 (M12-B) Output 5 (M12-C)Output 4 (M12-C) Output 7 (M12-D)Output 6 (M12-D)Pin 3 -CommonPin 5 -No Connect8 ArmorPoint 24V dc Output Modules, Series ACommunicate with Your Module I/O messages are sent to (consumed) and received from (produced) the ArmorPoint I/O modules. Messages are mapped into the processor’s memory. ArmorPoint I/O output modules produce 1 byte of input data (scanner Rx - status). They consume 1 byte of I/O data (scanner Tx).Default Data Map for the ArmorPoint Output Modules1738-OB2EM12 and 1738-OB2EPM12Message size: 1 ByteATTENTIONMake sure all connectors and caps are securelytightened to properly seal the connections againstleaks and maintain IP67 requirements.Output 6Output 7Return (Com)Return (Com)24V dcChassis76543210Produces(scanner Rx)Not Used Ch1Ch0Channel statusConsumes(scanner Tx)Not Used Ch1Ch0Output state Where: Channel status 0 = no error, 1 = error; Output state 0 = off, 1 = onPublication 1738-IN001C-EN-E - June 2005Publication 1738-IN001C-EN-E - June 2005ArmorPoint 24V dc Output Modules, Series A 91738-OB4EM12, 1738-OB4EM8, 1738-OV4EM12Message size: 1 Byte1738-OB8EM23, 1738-OB8EM12, 1738-OB8EM8Message size: 1 Byte76543210Produces (scanner Rx)Not Used Ch3Ch2Ch1Ch0Channel status Consumes (scanner Tx)Not UsedCh3Ch2Ch1Ch0Output stateWhere: Channel status 0 = no error, 1 = error; Output state 0 = off, 1 = on76543210Produces (scanner Rx)Ch7Ch6Ch5Ch4Ch3Ch2Ch1Ch0Channel status Consumes (scanner Tx)Ch7Ch6Ch5Ch4Ch3Ch2Ch1Ch0Output stateWhere: Channel status 0 = no error, 1 = error; Output state 0 = off, 1 = onPublication 1738-IN001C-EN-E - June 200510 ArmorPoint 24V dc Output Modules, Series ATroubleshoot with the IndicatorsIndication Probable Cause Module Status Off No power applied to device Green Device operating normallyFlashing Green Device needs commissioning due to missing, incomplete, or incorrect configuration Flashing Red Recoverable faultRedUnrecoverable fault - may require device replacement Flashing Red/Green Device is in self-test Indication Probable CauseNetwork Status OffDevice is not on line:- Device has not completed dup_MAC-id test.- Device not powered - check module status indicator.Flashing Green Device is on line but has no connections in the established state.Green Device is on line and has connections in the established state.Flashing Red One or more I/O connections in timed-out state.RedCritical link failure - failed communication device. Device detected error that prevents it from communicating on the network.Flashing Red/GreenCommunication faulted device - the device has detected a network access error and is in communication faulted state. Device has received and accepted an Identity Communication Faulted Request - long protocol message.1738-OB8EM12ArmorPoint 24V dc Output Modules, Series A 11Specifications Indication Probable CauseI/O StatusOff Output is inactive.Yellow Output is active and under control.Flashing Red Open circuit detection. No load. (Off-State only) Red Short circuit detected. (On-State only)ArmorPoint Digital Output ModulesNumber of Outputs 1738-OB2E - 2 (1 group of 2) non-isolated, sourcing1738-OB2EP - 2 (1 group of 2) non-isolated, sourcing1738-OB4E - 4 (1 group of 4) non-isolated, sourcing1738-OV4E - 4 (1 group of 4) non-isolated, sinking1738-OB8E - 8 (1 group of 8) non-isolated, sourcingVoltage Drop, On-state Output, Max.0.2V dc (sourcing modules)0.7V dc (sinking module)Voltage, External DC Power Supply, Range10 … 28.8V dcVoltage, External DC Power Supply, Nom.24V dcVoltage, Off-state Output, Max.28.8V dcVoltage, On-state Output, Nom.24V dcVoltage, On-state Output, Max28.8V dcVoltage, On-state Output, Min10V dcVoltage, Operating10 … 28.8V dcCurrent, External DC Power Supply8 mA (2 connector module)16 mA (4 connector modules)32 mA (8 connector modules)Current Leakage, Off-state Output, Max.0.5 mACurrent, On-state Output Max. 1.0 A per channel, electronically protectedCurrent, On-state Output Min. 1.0 mA per channelCurrent, Output Rating1738-OB2E - 1.0 A per channel, not to exceed 2.0 A maximum per module1738-OB2EP - 2.0 A per channel, 4.0 A maximum per module1738-OB4E and -OB8E - 1.0 A per channel, not to exceed 3.0 A maximum per module1738-OV4E - 1.0 A per channel, not to exceed 4.0 A maximum per module Current, Output Surge, Max. 2 A for 10 ms, repeatable every 3 seconds1738-OB2EP - 2 A, electronically protectedGeneral SpecificationsDimensions (includes I/O module Metricand mounting base)120Hx72Wx42DDimensions (includes I/O module Imperialand mounting base)4.72Hx2.82Wx1.65DIsolation Voltage(continuous-voltage withstand rating)50V rmsTested at 1250V ac rms for 60sKeyswitch Position1Publication 1738-IN001C-EN-E - June 200512 ArmorPoint 24V dc Output Modules, Series AGeneral Specifications (cont)LED Indicators2, 4, or 8 yellow/red output status, logic side1 green/red network status, logic side1 green/red module status, logic sideOutput Delay Time, OFF to ON, Max.10.1 msOutput Delay Time, ON to OFF, Max.10.1 msOutput Point Density2, 4, 8PointBus Current, Max.75 mA @ 5V dcPower Dissipation, Max.***************************************************************************************************************Thermal Dissipation, Max.1738-OB2E-2.7BTU/***********1738-OB2EP-11.6BTU/***********1738-OB4E-4.1BTU/***********1738-OV4E-9.9BTU/***********1738-OB8E-6.8BTU/***********Weight, Imperial0.64 lbWeigh, Metric0.29 kgOperating Temperature IEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock):-20 … 60 °C (-4 … 140°F)Storage Temperature IEC 60068-2-1 (Test Ab, Un-packaged Non-operating Cold),IEC 60068-2-2 (Test Bb, Un-packaged Non-operating Dry Heat),-40 … 85 °C (-40 … 185°F)Relative Humidity IEC 60068-2-30 (Test Db, Un-packaged Non-operating Damp Heat):5-95% non-condensingShock IEC60068-2-27 (Test Ea, Unpackaged Shock):Operating 30 gNon-operating 50 gVibration IEC60068-2-6 (Test Fc, Operating):5 g @ 10-500 HzESD Immunity IEC 61000-4-2:6 kV contact discharges8 kV air dischargesRadiated RF Immunity IEC 61000-4-3:10V/m with 1 kHz sine-wave 80% AM from 30 MHz to 2000 MHz10V/m with 200 Hz 50% Pulse 100% AM at 900 Mhz10V/m with 200 Hz 50% Pulse 100% AM at 1890 MhzEFT/B Immunity IEC 61000-4-4:±3 kV at 5 kHz on signal portsSurge Transient Immunity IEC 61000-4-5:±1 kV line-line(DM) and ±2 kV line-earth(CM) on signal ports Conducted RF Immunity IEC 61000-4-6:10Vrms with 1 kHz sine-wave 80% AM from 150 kHz … 80 MHz Emissions CSPR 11:Group 1, Class APublication 1738-IN001C-EN-E - June 2005ArmorPoint 24V dc Output Modules, Series A 13General Specifications (cont)Enclosure Type Rating Meets IP65/66/67 (when marked)Mounting Base Screw Torque#8 screw, 7.5 in. lbs. in Aluminum, 16 in. lbs. in SteelConductor Category2 1 - on signal portsCertifications:3 (when product is marked)c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada CE European Union 89/336/EEC EMC Directive, compliant with: EN 61000-6-4; Industrial EmissionsEN 50082-2; Industrial ImmunityEN 61326; Meas./Control/Lab., Industrial RequirementsEN 61000-6-2; Industrial ImmunityC-Tick Australian Radiocommunications Act, compliant with:AS/NZS CISPR 11; Industrial Emissions1.OFF to ON or ON to OFF delay is time from a valid output on or off signal to output energization or de-energization.e this Conductor Category information for planning conductor routing. Refer to Publication 1770-4.1, Industrial Automation Wiring andGrounding Guidelines.3.See the Product Certification link at for Declarations of Conformity, Certificates, and other certification details.Publication 1738-IN001C-EN-E - June 2005Publication 1738-IN001C-EN-E - June 2005 PN 957955-31Supersedes Publication 1738-IN001B-EN-E - July 2004Copyright © 2005 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.Rockwell Automation SupportRockwell Automation provides technical information on the web to assist you in using our products. At, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.For an additional level of technical phone support for installation, configuration and troubleshooting, we offer TechConnect Support programs. For more information, contact your local distributor or Rockwell Automation representative, or visit .Installation AssistanceIf you experience a problem with a hardware module within the first 24 hours of installation, please review the information that's contained in this manual. You can also contact a special Customer Support number for initial help in getting your module up and running:New Product Satisfaction ReturnRockwell tests all of our products to ensure that they are fully operational when shipped from the manufacturing facility. However, if your product is not functioning and needs to be returned:United States 1.440.646.3223Monday – Friday, 8am – 5pm ESTOutside United States Please contact your local Rockwell Automation representative for any technical support issues.United States Contact your distributor. You must provide a Customer Support casenumber (see phone number above to obtain one) to your distributor inorder to complete the return process.Outside United StatesPlease contact your local Rockwell Automation representative for returnprocedure.ArmorPoint is a trademark of Rockwell Automation.。
Panasonic高清摄像头产品说明书
• 720p HD images up to 30 fps• Super high resolution at HD / 1,280 x 720 created by 2.4 Megapixel high sensitivity MOS image sensor• Multiple H.264 (High profile) streams and JPEG streams ensure simultaneous real time monitoring and high resolution recording by “UniPhier ®”, Panasonic’s proprietary System LSI platform.• Full frame (Up to 30 fps) transmission at 1,280 x 960 image size • 45x HD extra optical zoom at 1,280 x 720 (30x optical zoom) 90x extra optical zoom at 640x360 resolution with 12x digital zoom enabling 1080x zoom.• Super Dynamic and ABS (Adaptive Black Stretch) technologies deliver 128x wider dynamic range compared to conventional cameras.• Face Super Dynamic technology ensures clear face image.• High sensitivity with Day/Night (ICR*) function: 0.3 lx (Color), 0.04 lx (B/W) at F1.6 *ICR: IR Cut filter Removal• VIQS (Variable Image Quality on Specified area) technology allows the designated 2 areas to retain higher image quality while the excluded area will have a decreased image quality, which enables to use lower image file size and bit rate.VIQS can be set on preset position (1 to 8) and except preset.• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.• Progressive scan ensures clear images with less motion blur and no tearing even when the subject is moving.• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF • Selectable light control modes:Outdoor scene / Indoor scene (50 Hz) / Indoor scene (60 Hz) / Fix shutter Indoor scene (50 Hz / 60 Hz): Flicker causedby fluorescent lightning will be automatically compensated.• 360 degrees endless Panning• Advanced auto tracking: The camera automatically pans and tilts to follow a moving subject and keep it in the center of the image.• PTZ control can be taken very smoothly on the user friendly GUI with 16 speeds pan/tilt and “Drag and Zoom” operation enabling finer control. 256 speeds available for system with WV-CU950 system controller.• Up to 256 preset positions• 360 map shot: 8 thumbnail images at 45 deg. intervals make it simple to direct the camera easily by clicking on a thumbnail.• Industrial grade Pan / Tilt / Zoom mechanism for high reliability• VMD (Video Motion Detection) with 4 programmable detection areas, 15 steps sensitivity level and 10 steps detection size• Privacy Zone can mask up to 32 private areas, such as house windows and entrances/exits.• Camera title display: Up to 20 alphanumeric characters on the browser• Alarm sources including 3 terminal input, VMD and Panasonic alarm command can trigger actions such as SDXC/SDHC/SD memory recording, FTP image transfer, E-mail notification, Indication on browser, Alarm terminal output, and Panasonic alarm protocol output.• Full duplex bi-directional audio allows interactive communication between camera site and monitoring site.• JPEG Image compression ratio can be changed by alarm so that higher quality image can be provided.• Prioritized stream control: One of the video streams can be prioritized when multiple recorders or client PCs are accessing the camera so that the recorder or the client PC can maintain the frame rate.• SDXC/SDHC/SD Memory card slot for manual recording (H.264 / JPEG), alarm recording (H.264 / JPEG) and backup upon network failure (H.264 / JPEG) • H.264 max. bit rate / client and Total bit rate control allows flexible network traffic management. Frame rate priority mode controls bit rate and compression ratio to provide the specified frame rate.• Internet mode: H.264 images can be transmitted over HTTP protocol.• Multi-language: English / Italian / French / German / Spanish / Portuguese / Russian / Chinese / Japanese • IPv4/IPv6 protocol supported• Supports SSL, DDNS (viewnetcam, RFC2136)• Still images (JPEG) can be viewed on mobile phones via Internet.• Onvif compliant model• IP66 rated water and dust resistant. Compatible with IEC60529 measurement standard compliant.• Dehumidification device for use in various weather conditions • Rain wash coating dome cover• Ambient Operating Temperature : -50 °C to +55 °C ( -58 °F to 131 °F )• Fog compensation function equipped as standard.• AEM (Auto Eyelid Mechanism) offers images that are more natural and easy to watch reducing doubled images when direction of the lens moved above the horizontal.HD / 1,280 x 720 H.264 Weather Proof Camera featuring 45x HD extra optical zoom and Super DynamicKey FeaturesSuper Dynamic Weather Resistant HD PTZ Dome Network CameraWV-SW397A(Rain Wash Coating Model)Trademarks and registered trademarks– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.– iPad, iPhone and iPod touch are registered trademarks of Apple Inc.– Android is a trademark of Google Inc.– UniPhier is a registered trademark of Panasonic Corporation.– "MEGA Super Dynamic", "i-PRO SmartHD" logos are trademarks or registered trademarks of Panasonic Corporation.– ONVIF and the ONVIF logo are trademarks of ONVIF Inc.Important– Safety Precaution: Carefully read the Important Information, Installation Guide and operating instructions before using this product.– Panasonic cannot be responsible for the performance of the network and/or other manufacturers' products used on the network.• Masses and dimensions are approximate. • Specifications are subject to change without notice.SpecificationsSDXC/SDHC/SDMemory Card (Option)Cellular Phone Compatibility Mobile Terminal Compatibility Alarm Source Alarm ActionsAlarm LogScheduleH.264 recording (Audio recording is enable): Manual REC / Alarm REC (Pre/Post) /Schedule REC / Backup upon network failure JPEG recording: Manual REC / Alarm REC (Pre/Post) / Backup upon network failureCompatible SD (SDHC/SDXC) card: Panasonic2 GB, 4 GB*, 8 GB*, 16 GB*, 32 GB*, 64GB** model *SDHC card, ** SDXC card (except miniSD card and microSD card) JPEG image, panning/ tilting/ zoom/ focus control, AUX control (by access level)iPad, iPhone, iPod touch (iOS 4.2.1 or later) Android mobile terminals3 terminals input, VMD, Command alarm, Audio detection SDXC/SDHC/SD memory recording, E-mail notification,Indication on browser, FTP image transfer, Panasonic protocol output With SDXC / SDHC / SD memory card: 5,000 logs, without SDXC / SDHC / SD memory card: 1,000 logsAlarm / VMD / Access permission / H.264 recording / Audio detection Monitor Output (for adjustment) Microphone/Line InputAudio OutputExternal I/O Terminals Safety/EMC StandardPower Source and Power Consumption Ambient Operating TemperatureAmbient Operating Humidity Shock ResistanceWater and Dust Resistance DimensionsMass (approx.) FinishVBS : 1.0V[p-p] / 75Ω,NTSC / PAL composite, BNC JackMIC IN and Line IN are selectable. ø3.5 mm stereo mini jack (monaural input) (Applicable microphone: Plug-in power type) Supply voltage: 2.5 V ±0.5 V Input impedance: approx. 2 kΩ ø3.5 mm stereo mini jack (monaural output) Line levelALARM IN 1 (DAY/NIGHT IN), ALARM IN 2 (ALARM OUT), ALARM IN 3 (AUX OUT) AC24 V : 3.5 A, 55 WPoE+ DC54 V: 470 mA, 25 W (IEEE802.3at compliant)POE Injector (60 W) DC54 V : 1.0 A, 50 WAC24 V and Tested PoE Injector (60 W) : –50 °C to +55 °C (-58 °F to 131 °F) * with limitations POE+ : –30°C to +55°C (–22 °F to 131 °F) Less than 90 % (no condensation)Compliant with IK10 (IEC62262)Main body : IP66 (IEC60529) compliantø229 mm x 392 mm(H) {ø9-1/32 inches x 15-7/16 inches(H)} diameter of the dome 160 mm(6-5/16 inches) Approx. 5.0 kg { 11.02 lbs}Main body : Aluminum die cast, Natural silver Sunshields : ASA resin coating, Natural silverDome section : Clear polycarbonate resin (Rain wash coating)<Safety>UL (UL60950-1), C-UL (CAN/CSA C22.2 No.60950-1), CE, IEC60950-1<EMC>FCC Part15 Class A, ICES-003 Class A, EN55022 Class B, EN55024*1 Converted value*2 For further information about PC system requirements and precautions for when using Microsoft ® Windows ® 8.1,Microsoft ® Windows ® 8, Microsoft ® Windows ® 7, Microsoft ® Windows Vista ®, or Windows Internet Explorer, click“Manual” - “Open” from the supplied CD-ROM and refer to “Notes on Windows ® / Internet Explorer ® versions”.*3 AAC (Advanced Audio Coding) is only used when recording audio on an SD memory card.*4 Transmission for 2 streams can be individually set.NetworkAlarmInput/OutputGeneralImage Sensor Effective Pixels Scanning Mode Scanning AreaMinimum IlluminationWhite BalanceLight Control ModeShutter SpeedSuper DynamicFace Super Dynamic Adaptive Black Stretch Fog compensation Gain (AGC)Electronic Sensitivity UP Day & Night (ICR)Digital Noise Reduction Video Motion Detection Privacy Zone Image Stabilizer VIQSDouble Image Reduction Camera Title (OSD) Focus distance Focal Length Zoom RatioDigital (Electrical) Zoom Angular Field of ViewMaximum Aperture Ratio Focusing Range Aperture RangePanning RangePanning SpeedTilting RangeTilting SpeedProportional Pan/Tilt Control Number of Preset Positions Auto Mode Image HoldPTZ Position Display Self Return Map Shot4.3 mm - 129.0 mm {3/16 inches - 5-3/32 inches} 30x / 45x with HD extra optical zoom (at 1280 x 720)12x (Max. 1080x combined with extra optical zoom at 640 x 360) H: 2.6° (TELE) - 64.6° (WIDE), V: 1.6° (TELE) - 38.2° (WIDE) ([16:9] mode)*H: 1.4° (TELE) - 44.4° (WIDE), V: 1.1° (TELE) - 33.8° (WIDE) ([4:3]mode)1 : 1.6 (WIDE) - 4.7 (TELE) 2.0 m - ∞ F1.6 - Close 360° endlessManual: approx. 0.065°/s to 120°/s, Up to 256 steps (depending on the controller)Preset : up to approx. 300°/s–15° to 195° (upward-level-downward)Auto Eyelid Mechanism (Double image reduction)Selectable tilting angle: 0° / –5°/ –10° / –15Manual: approx. 0.065°/s to 120°/s, Preset: up to approx. 300°/s Yes 256Auto track/ Auto pan/ Preset sequence/ 360 map-shot/ Patrol On / Off On / Off10 s / 20 s / 30 s / 1 min / 2 min / 3 min / 5 min / 10 min / 20 min / 30 min / 60 min 360° map shot / Preset map shotCamera ControlDisplay ModeCamera Title Clock Display Alarm Control One Shot Capture AudioSD Memory Data Download GUI/Setup Menu LanguageSystem Log Supported OS *2Supported BrowserImage Resolution H.264 *4JPEGImage Capture Mode:16:9H.264 : 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps JPEG (MJPEG): 1,280 x 720 / 640 x 360 / 320 x 180, up to 30 fps 10Base-T / 100Base-TX, RJ45 connectorH.264 : 1,280 x 960 / 800 x 600 / 640 x 480 / 320 x 240, up to 30 fps JPEG (MJPEG): 1,280 x 960 / 800 x 600 / 640 x 480 / 320 x 240, up to 30 fps Network IF Audio Compression Audio ModeAuthentication for Audio Total Bit RateSupported ProtocolFTP ClientMaximum concurrent access numberPan/Tilt (256 steps), Zoom, Focus, Click centering, Drag zoom, Iris,Preset position call and program, Auto modeSpot, Quad: Image from 16 cameras can be displayed in 4 different Quad screens or 16 split screen (JPEG only). 20 characters camera title available.Up to 20 alphanumeric charactersTime: 12H/24H, Date: 5 formats on the browser, Summer time (Manual)ResetA still picture will be displayed on a newly opened window.Mic (Line) Input: On / Off Volume adjustment : Low / Middle / High Audio Output : On / Off Volume adjustment : Low / Middle / High Still or motion Images recorded in the SDXC/SDHC/SD memory card can be downloaded. English / Italian / French / German / Spanish / Portuguese / Russian / Chinese / Japanese Up to 100 (Internal)Up to 4,000 (SDXC/SDHC/SD memory when the recording format is set to JPEG.) error logs Microsoft ® Windows ® 8.1,Microsoft ® Windows ® 8, Microsoft ® Windows ® 7, Microsoft ® Windows Vista ®, Microsoft ® Windows ® XP SP3Windows ® Internet Explorer ® 11 (32 bit), Windows ® Internet Explorer ® 10 (32 bit), Windows ® Internet Explorer ® 9 (32 bit), Windows ® Internet Explorer ® 8(32 bit),Windows ® Internet Explorer ® 7 (32 bi t)Approx.1/3 type MOS image sensor Approx. 2.4 mega pixels Progressive scan5.38 mm (H ) x 3.02 mm (V ) {7/32 inches(H) x 1/8 inches(V)}Color: 0.3 lx, BW: 0.04 lx (F1.6, Auto slow shutter: Off (1/30s), Gain: On(High))Color: 0.019 lx, BW: 0.003 lx (F1.6, Auto slow shutter: Max. 16/30s, Gain: On(High)) *1AWC (2,000 - 10,000 K), ATW1 (2,700 - 6,000 K), ATW2 (2,000 - 6,000 K)Outdoor scene: Automatic integration of ALC and ELCIndoor scene [50 Hz]: Automatic integration of ALC and ELC (up to 1/100 s)Indoor scene [60 Hz]: Automatic integration of ALC and ELC (up to 1/120 s)Fix shutterFix shutter: 1/30, 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250,1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000 (only at Super Dynamic Off) On / OffOn / Off (Only when Super Dynamic: On) On / Off (Only when Super Dynamic: Off) On / OffOn (Low, Mid, High) / OffOFF / AUTO (Max. 2x (2/30 s), 4x (4/30 s), 6x (6/30 s), 10x (10/30 s), 16x (16/30 s)) Mode: AUTO1 / AUTO2 / AUTO3 / On / Off, Level: High / Low, with external control High / Low4 areas, Sensitivity: 15 steps, Detection size: 10 steps Up to 8 zones / Up to 32 zones, Gray / Mosaic On / OffUp to 2 zones at preset position 1-8 and except preset On / OffUp to 20 characters (alphanumeric characters, marks) Limited / UnlimitedImage Capture Mode:4:3Transmission Mode Frame Rate Bit Rate/ClientImage Quality Refresh Interval Transmission Type Image Quality Refresh Interval Transmission TypeConstant bitrate / Frame rate priority / Best effort /Advanced VBR 1 / 3 / 5 / 7.5 / 10 / 12 / 15 / 20 / 30 fps64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 / 6,144 / 8,192 kbps Low / Normal / Fine0.2 / 0.25 / 0.33 / 0.5 / 1 / 2 / 3 / 4 / 5 s Unicast / Multicast 10 steps0.1 fps to 30 fps Pull / PushG.726 (ADPCM) 32 kbps / 16 kbps, G.711 64 kbps, AAC *3Off / Mic (Line) input / Audio output / Interactive (Half duplex) / Interactive (Full duplex) Level 1 only / Level 2 higher / All users64 / 128 / 256 / 384 / 512 / 768 / 1,024 / 2,048 / 4,096 / 8,192 kbps / Unlimited IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, FTP, SMTP, DNS, NTP, SNMP, DHCPv6, ICMP, ARPIPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP,FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, ICMP, ARP Alarm image transmission, FTP periodic transmission (When the FTP transmission is failed, backup on an optional SDXC/SDHC/SD memory card is available. ) Up to 14 users (Depends on network conditions)CameraLensPan and Tilt Browser GUINetworkDISTRIBUTED BY:/PanasonicNetworkCamera(2A-146AL)。
九球高分辨角度指示器（API）Model 8810A 双同型旋转 解析度测量以及可选的参考供应说明书
One optional Reference supply •Direct replacement for all 8810’s•High resolution touch-screen•Two isolated Input Channels•0.0001° Resolution•±0.004°Accuracy (Optional ±0.0015°)•LXI compatible•Programmable display options•Auto-ranging Signal and Reference•47 Hz to 20 KHZ Frequency Range•DC rate or angle output•Auto Phase Correction•Optional 2.2 VA internal Reference•Measures and displays ReferenceVoltage, frequency, and VL-L•Ethernet, USB, IEEE-488 andparallel ports•| compliantGENERALThis second generation API, Model 8810A, truly represents a major step forward in synchro to digital conversion technology. The use of an intelligent DSP design eliminates push buttons and allows all programming to be done either via an integrated touch-screen or a mouse interface. In addition, IEEE-488, Ethernet, and USB interfaces have been added to extend remote operation capabilities. The display can be set for one of three display modes; 0-360º, ±180°, or Degrees, Minutes, Seconds. A wide (47 Hz to 20 KHz) frequency range is standard. As an option, a programmable 2.2 VA internal reference supply can be specified.Improved flexibility is provided by two fully independent inputs that can be used to simultaneously read two separate input signals or can be combined to measure multi-speed Synchros or Resolvers. The gear ratio, for the two-speed mode, is programmable from 2:1 to 255:1Built-in phase correction eliminates errors caused by quadrature and harmonics when reference and signal are out of phase by as much as 60°.The 8810A automatically accepts and displays input voltages from 1.0 to 90 V L-L and Reference voltages from 2 to 115 Vrms over a broad frequency range of 47 Hz to 20 KHz.Therefore, one Instrument can handle most known Synchro and Resolver measurement requirements.The 8810A is a direct replacement for all variations of the previously supplied North Atlantic Industries Model 8810. Special versions (P/N = 8810 –Sxxxx), contact factory to determine compatibility.Optional Reference: This design can also incorporate a 2.2 VA programmable reference generator that is used for stand alone applications (See P/N)One optional Reference supply(Drop In Replacement for NAI API Model 8810 with significant new features)One optional Reference supply SPECIFICATIONSResolution0.0001°Input Channels 2 separate isolated InputsSignal Inputs Ch.1: Synchro/Resolver programmable. 1-90V L-L auto-rangingCh.2: Synchro/Resolver programmable. 1-90V L-L auto-rangingEach channel measures the Input V L-L, Reference voltage and frequency.Data is displayed on the front panel and also available via various digital outputs. Accuracy See detailed Accuracy Specifications below.Frequency Range47 Hz – 20 kHz. See detailed Accuracy Specifications below.Angular Range0.0000°-359.9999° or ±179.9999° programmable, or output angle can be viewed in degrees, minutes and secondsTwo-speed mode Both inputs can be combined with a ratio from 2 to 255Reference Voltage2V to 115 V auto-rangingInput Impedance Signal: >28 V L-L 200 kΩ ; >11.8 V L-L 60kΩ; <11.8 V L-L 13.3 kΩTracking Speed 2.76 rps. at 60 Hz4.68 rps. at 360 Hz or higherSettling Time 1.5 s max. for 180° step change (Based on Bandwidth selected)3.0 s max. at 47-66 Hz (Based on Bandwidth selected)Phase Correction Automatically corrects for up to a 60° phase shift between stator and rotorVelocity or DC angle for Ch.1 & Ch.2 ±1000 °/sec = ±10 VDC ±100 °/sec = ±10 VDC 0 to 359.99°= 0 -10 VDC ±179.99° = ±10 VDCBand width Automatically set to 28% of frequency up to a max. of 100 Hz. User canchange this parameter as desired.Data averaging Selectable from 10 ms to 10 secondsConverter Busy TTL compatible pulses, 1µs wide nom. Pulses present when tracking. Digital Output 6 decade BCD (1-2-4-8) 10 TTL loadsSerial Interfaces Ethernet, USB, and IEEE-488, and legacy 50 pin connector Temperature Range0-50°C operatingInput Power 85 Vrms to 265 Vrms, 47 to 440 HzWeight 4 lbs.Dimensions12.5" L x 9.5" W x 3.5" HREFERENCE GENERATOR SPECIFICATIONS: Optional, see part number Voltage Output: 2 Vrms to 115 Vrms, Programmable with a resolution of 0.1 V• 2.0 to 9.9 Vrms / 47 Hz to 20 KHz frequency range•10.0 to 27.9 Vrms / 47 Hz to 4 KHz frequency range•28.0 to 115.0 Vrms / 47 Hz to 800 Hz frequency range Accuracy: ±3% of settingHarmonic Content: 2.0% maximumOutput Drive: 2.2 VA (See Operation manual for detail description of Output Drive) Output Protection: Over-current and over-temperatureFrequency: 47 Hz to 20 kHz Programmable with 0.1 Hz stepsFrequency accuracy: 0.1% FSOne optional Reference supplyDETAIL ACCURACY SPECIFICATIONSAccuracy: 8810A SPECIFICATIONS APPLY AFTER A 15 MINUTE WARMUP AND CALIBRATION Resolver mode:2.0 to 28 V L-L±0.004° from 47 Hz to 5 KHzResolver mode: 28 to 90 VL-L ±0.004° from 47 Hz to 1 KHzResolver mode:2.0 to 12 V L-L±0.004° to ±0.008° from 5 KHz to 10 KHz derated linearlyResolver mode:2.0 to 12 V L-L±0.008° to ±0.015° from 10 KHz to 15 KHz derated linearlyResolver mode:2.0 to 12 V L-L±0.015° to ±0.02° from 15 KHz to 20 KHz derated linearlyResolver mode: 1.0 to 2.0 VL-L ±0.006° from 47 Hz to 5 KHzResolver mode: 1.0 to 2.0 VL-L ±0.006° to ±0.015° from 5 KHz to 10 KHz derated linearlyResolver mode: 1.0 to 2.0 VL-L ±0.015° to ±0.025° from 10 KHz to 15 KHz derated linearlyResolver mode: 1.0 to 2.0 VL-L ±0.025° to ±0.035° from 15 KHz to 20 KHz derated linearlySynchro mode: 2.0 to 90 V L-L±0.004° from 47 Hz to 1 KHzAccuracy: 8810AH SPECIFICATIONS APPLY AFTER A 15 MINUTE WARMUP AND CALIBRATION Resolver mode:2.0 to 28 V L-L±0.0015° from 47 Hz to 5 KHzResolver mode:28 to 90 V L-L±0.002° from 47 Hz to 1 KHzResolver mode:2.0 to 12 V L-L±0.0015° to ±0.005° from 5 KHz to 10 KHz derated linearlyResolver mode:2.0 to 12 V L-L±0.005° to ±0.01° from 10 KHz to 15 KHz derated linearlyResolver mode:2.0 to 12 V L-L±0.010° to ±0.015° from 15 KHz to 20 KHz derated linearlyResolver mode: 1.0 to 2.0 VL-L ±0.0025° from 47Hz to 5 KHzResolver mode: 1.0 to 2.0 VL-L ±0.0025° to ±0.01° from 5KHz to 10 KHz derated linearlyResolver mode: 1.0 to 2.0 VL-L ±0.010° to ±0.02° from 10 KHz to 15 KHz derated linearlyResolver mode: 1.0 to 2.0 VL-L ±0.02° to ±0.03° from 15 KHz to 20 KHz derated linearlySynchro mode:2.0 to 28 V L-L±0.0015° from 47 Hz to 1 KHzSynchro mode:28 to 90 V L-L±0.0025° from 47 Hz to 1 KHzCALIBRATIONWhen unit is turned on it will automatically initiate calibration. After warm-up of 15 minutes, unit will again automatically calibrate the channel or channels being used. Once calibrated, unit will monitor usage. Should frequency or voltage of measured signal change by more than 12.5%, unit will automatically recalibrate the channel in use. Calibration takes about 2 seconds.One optional Reference supplyINTERFACESThe 8810A is available with several different interfaces for ATE applications. Interfaces include, Ethernet, USB, IEEE-488, and a legacy 50 pin connector for API parallel BCD outputs. The legacy 50 pin connector and the IEEE-488 are both 100% backwards compatible with the model 8810. Below is information, for each interface. Detail programming commands / information are included in “8810A Programmer’s Reference Guide.” The Ethernet connector and the USB connector J3, are industry standard connections.(Table 4) J1 CONNECTOR, API PARALLEL PIN DESIGNATIONSDD50P, Mate DD50S or equivalentPin Designation Pin Designation Pin Designation Pin Designation Pin Designation1 *Do Not Use 11 Converter busy 21 S1 Ch.2 310.4º 41 DC out Ch.12 *Do Not Use 12 0.04º 22 S2 Ch. 2 32 2 deg. (BCD) 42 Data Freeze3 Chassis ground 13 0.01º 23 S3 Ch. 2 338 deg. (BCD) 43 Remote Ch. select4 Digital ground 14 0.8º 24 S4 Ch. 2 34Do Not Use 44 0.004º or 0.005º for5 S1 Ch. 1 15 0.2º 25 R1 Ch.2 Ref Hi 35Do Not Use 45 20 deg. (BCD)6 S2 Ch. 1 16 4º 26 R2 Ch. 2 Ref LO 36Reference Out Hi 46 40 deg. (BCD)7 S3 Ch. 1 17 1º 27 Not Data Freeze 37Reference Out Lo 47 80 deg. (BCD)8 S4 Ch. 1 18 Do Not Use 28 0.02º 380.008º 48 10 deg. (BCD)9 R1 Ch. 1 Ref HI 19 DC out Ch.2 29 0.08º 390.002 º 49 100 deg. (BCD)10R2 Ch. 1 Ref LO 20Local/Rem select300.1º400.001º or 0.005º for179.9950200º or + bit for 179.9º* Previous models allowed power input at pins 1 & 2. To meet new safety requirements, power input is ONLY via the Power Entry module.(Table 5) J2 CONNECTOR, IEEE - 488 PIN DESIGNATIONSStandard IEEE Interface ConnectorPin Designation Pin Designation1 DIO1 13 DIO52 DIO214 DIO63 DIO315 DIO74 DIO416 DIO85 EOI 17 REN6 DAV 18 Gnd., DAV7 NRFD 19 Gnd.,NRFD8 NDAC 20 Gnd.,NDAC9 IFC 21 Gnd., IFC10 SRQ 22 Gnd., SRQ11 ATN 23 Gnd., ATN12 Shield 24 Gnd., LogicOne optional Reference supplyORDERING INFORMATIONPart numbers:8810A- *Standard accuracy ±0.004° (See Detail Accuracy Specifications)Add “R” for an internal programmable 2.2 VA Reference Generator8810AH- *Optional high accuracy unit±0.0015° (See Detail Accuracy Specifications) Add “R” for an internal programmable 2.2 VA Reference GeneratorNOTE: The 8810A (all models) are | compliantACCESSORIESIncluded with the 8810A is an accessory kit NAI part number 8810A-ACCESSORY-KIT.Kit includes the following items:Description NAI P/N50 Pin Mating connector for J1 05-0053Fuse, 5 x 20mm, 2A, slo-blo 99-0146Line Cord 202-0002Optional Mounting AccessoriesThe 8810A can be ordered with mounting adapters for mounting either one or two units in a standard 19-inch equipment rack. The table below describes full rack and tandem full rack mounting accessories.Type of Mount Description NAI P/NFull Rack Mounting Mounts one unit in 19-inch rack 783893Tandem Full Rack Mounting ½ height Mounts two units side by side in 19-inch rack548557(3-1/2" rack height)One optional Reference supply MECHANICAL OUTLINE, Model 8810AOne optional Reference supplyRevision HistoryRevision DescriptionofChange EngineerDateA PreliminaryRelease FH / as 05 DEC 05 A1 PreliminaryRe-release FH / as 06 JAN 06B InitialRelease AS 10 FEB 06C Corrected discrepancies (Resolution / accuracy) with operations manual FR 30 JUN 06D Restated accuracy specifications pg 1 & pg 3, changed operating temp. to 50 deg C max.added high accuracy P/N 8810AHFR 18 JUL 06E Updated all screen shots to latest actual units, added additional connector interfaceinformation, added Mechanical outline drawing, modified Title of document, changed filename from “8810A-B001 revX” to from “8810A-A001 revX” for consistency.FR 07 AUG 06F Corrected Tilt stand information (standard, not optional) FR 08/11/06F1 Deleted mouse as a purchase option, changed Ref. Generator output to 1.2VA FR 08/22/06F2 NewAddress KL 04/25/07F3 Edited accuracy specifications pg 1& 3, changed Band Width statement pg.3, added pageafter “SPECIFICATIONS” with Accuracy Tables for “A” & “AH” models & addedCALIBRATION statement. Edited Part numbers re: accuracy. Changed power output ratingfor Optional reference from 1.2 VA to 2.2 VA on pgs 1, 3 & 6.FR 09/27/07F4 Added|compliant statement to page 1 & 6. FR10/09/07 F5 Corrected minor typo. errors pages 1,3 & 4, added note re: Reference Output Drive details. FR 10/11/07G Added REF frequency characterization for voltage output, changed max REF harmoniccontent from 1% to 2% (Reference Generator Specifications pg.3).AS 11/07/07H Updated 3 screen shots on page 2 (Dual Ch., Int. Ref. & Loc./Remote). Updated “MechanicalOutline” drawing on pg. 7.FR 1/02/08。
车米汽车夜视仪(全天候ADAS)1.0版本安装流程介绍
车米夜视仪安装流程（WIFI1.0）第一步：在安装车米夜视仪设备之前，打开包装盒，检查包装盒里是否有如下设备：（1）、夜视仪摄像头；（2）、车米WiFi模块（注:车米夜视仪单机版的没有）；（3）、车米夜视仪摄像头的底座和配件；（4）、Acc延长线（注：在车米夜视仪的包装盒配有三条不同保险丝的Acc延长线）；（5）、内存卡（注：车米夜视仪包装盒里标配是8Gtf 卡，车米夜视仪单机版有一个读卡器）；（6）、保修说明书；（7）GPS天线（这里会配一套饰件）；（8）、电源线和OBD线。
（注：在检查车米夜视仪包装盒中有以上设备，可以进行安装；如果发现少设备，须及时和供货的部门沟通。
）第二步：车上安装：1、在安装设备前，汽车在空挡的情况下，先发动一下汽车，检查一下汽车的仪表盘是否正常。
如果发现汽车有异常，应及时和车主沟通，说明车的情况。
如果没有异常，可以进行下一步安装。
2、在进行安装车米夜视仪底座前，先清洁一下汽车前挡风玻璃，车米夜视仪应安装在汽车雨刷器可以清洁到的汽车前挡风玻璃范围内。
3、清洁车内前挡风玻璃，安装车米夜视仪底座。
在清洁车内前挡风玻璃时，应先看看是否在汽车雨刷器能清洁的范围内。
在安装车米夜视仪的底座的时候，一定要注意车米夜视仪底座的上部，一定要和汽车前挡风玻璃的饰板保持平行。
（注：车米夜视仪底座粘上汽车前挡风玻璃三十分钟之内，不要安装摄像头）。
4、把车米夜视仪的摄像头取出，车米夜视仪的摄像头的背面左侧，有一个TF卡的卡槽，把TF卡安装在车米夜视仪的摄像头的卡槽里，以待备用。
（注：因为TF卡比较小所以我建议先安装在车米夜视仪的卡槽里，以免丢失）。
5、在等底座胶干的同时，可以把电源线束和GPS天线取出，在这个时候有两种可能：（1）、汽车前挡风玻璃上有后视镜饰板，这样的先需要拆卸汽车后视镜饰板。
（注：我现在还没有遇到）。
（2）、汽车前挡风玻璃上没有后视镜饰板。
（注：这种情况下，就根据车的实际情况来实施安装）。
符合道路运输车辆卫星定位系统标准的车载终端
ET-662
GPRS
深圳市东运科技
70320
26
DM8002
客、危、货
LEA-5A
GSM
深圳市甲天行科技
70321
27
HB-R03C
客、危、货
TD3006B
CDMA
深圳市华宝电子科技
70107
28
YW3000-C
客、危、货
NEO-6M
CDMA
深圳市有为信息技术开展
70218
29
YW3000-Y
客、危、货
UM330
GSM
深圳市伊爱高新技术开发
70108
21
YW3000
客、危、货
NEO-6M
GPRS、GSM
深圳市有为信息技术开展
70218
22
SCX-N18
客、危、货
ET-662
GSM
深圳市优胜信息科技
70219
23
G-3G(D)
客、危、货
NEO-5M
GSM
深圳市易流科技
70220
24
HNS-CZ251
序号
设备型号
适用车型
定位模块
通信模式
厂家名称
厂家编号
备注
1
TB-001-GT1
客、危、货
NEO-6M
GPRS、GSM
广东长宝信息科技
70201
2
XW-H3000
客、危、货
NEO-6M
GPRS、GSM
广州星唯信息科技
70202
3
HB880-6A
客、危、货
ET-662
GPRS、GSM
山东九通物联网科技
E103-W08 产品规格书说明书
E103-W08产品规格书2.4G串口WIFI BLE配网低功耗目录第一章概述 (1)1.1简介 (1)1.2功能特点 (1)1.3应用场景 (2)第二章规格参数 (2)2.1极限参数 (2)2.2工作参数 (2)第三章机械尺寸与引脚定义 (3)3.1E103-W08A引脚尺寸图 (3)3.2E103-W08A引脚尺寸图 (4)第四章推荐连线图 (5)第五章功能说明 (5)5.1工作模式 (5)5.1.1TCP通信 (6)5.1.2MQTT通信 (7)5.1.3HTTP通信 (7)5.2TCP心跳包 (7)5.3自动连接 (7)5.4手动连接 (8)5.5手动断开 (8)5.6BLE配网 (8)5.7状态指示 (8)5.8低功耗 (8)5.9注意事项 (9)第六章默认参数 (9)第七章AT指令及参数 (10)7.1错误码表 (11)7.2基本AT指令 (11)7.2.1AT测试指令 (11)7.2.2重启模块 (11)7.2.3恢复出厂参数 (12)7.2.4查询版本信息 (12)7.2.5查询、设置串口参数 (12)7.2.6查询、设置工作模式 (12)7.2.7查询、设置电源模式 (13)7.3WIFI相关AT指令 (13)7.3.1扫描可用AP (13)7.3.2连接到指定AP (13)7.3.3与AP断开连接 (14)7.3.4查询、设置连接模式 (14)7.3.5查询MAC地址 (14)7.3.6查询、设置主机名 (14)7.4TCP相关AT指令 (15)7.4.1查询网络连接状态 (15)7.4.2建立TCP传输 (15)7.4.3关闭TCP传输 (15)7.4.4查询本地IP (15)7.4.5查询、设置多连接 (15)7.4.6查询、设置TCP模式 (15)7.4.7查询、设置是否打印对端IP、端口 (16)7.4.8查询、设置远程目标参数 (16)7.4.9查询、设置心跳数据 (16)7.5MQTT相关AT指令 (17)7.5.1查询、设置MQTT远程目标 (17)7.5.2查询、设置MQTT发布主题 (17)7.5.3查询、设置MQTT订阅主题 (17)7.5.4查询、设置MQTT登录参数 (17)7.5.5查询、设置MQTT连接参数 (18)7.6HTTP相关参数 (18)7.6.1查询、设置远程目标 (18)7.6.2查询、设置URL (18)7.6.3查询、设置数据类型 (18)7.7BLE相关参数 (19)7.7.1查询、设置BLE广播名 (19)7.7.2查询、设置BLE广播间隙 (19)第八章使用教程 (20)8.1TCP通信 (20)8.1.1透传 (20)8.1.2协议传输 (21)8.2HTTP通信 (23)8.3MQTT通信 (23)8.4BLE配网 (24)第九章焊接作业指导 (27)9.1回流焊温度 (27)9.2回流焊曲线图 (27)修订历史 (28)关于我们 (28)免责申明和版权公告本文中的信息，包括供参考的URL地址，如有变更，恕不另行通知。
MIC2033 高精度高侧固定电流限制电源分布开关说明书
MIC2033 Evaluation BoardHigh-Accuracy, High-Side, Fixed Current Limit Power SwitchMicrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 •General DescriptionThe MIC2033 is a high-side MOSFET power distribution switch providing increased system reliability using 5% current limit accuracy.The MIC2033 has an operating input voltage range from 2.5V to 5.5V, is internally current limited, and has thermal shutdown to protect the device and system. The MIC2033 is offered with either active-high or active-low logic level enable input controls. It has an open drain fault status output flag with a built-in 32ms delay that asserts low during overcurrent or thermal shutdown conditions.The MIC2033 is available with several different fixed current limit options: 0.5A, 0.8A, 1A, and 1.2A. A capacitor-adjustable soft-start circuit minimizes inrush current in applications using high capacitive loads.The MIC2033 is offered in both 6-pin SOT-23 and 6-pin 2mm x 2mm thin DFN packages. It has an operating junction temperature range of −40°C to +125°C. RequirementsThe MIC2033 evaluation board requires a single power supply to provide V IN . The V IN power supply must be able to deliver a minimum of 2.5V and more than 1.5A capability. The output load can either be active or passive. PrecautionsThe evaluation board does not have reverse polarity protection. Applying a negative voltage to the V IN terminal can damage the device. In addition, the maximum V IN operating voltage of the MIC2033 evaluation board is 5.5V. Exceeding 5.5V on V IN can permanently damage the device.Getting Started1. Connect an external supply to the V IN terminal .Apply the desired input voltage to the V IN and ground terminals of the evaluation board, paying careful attention to polarity and supply voltage. The user can place an ammeter between the input supply and the V IN terminal to the evaluation board. Make sure that the supply voltage is monitored at the V IN terminal. The ammeter and/or power lead resistance can reduce the voltage supplied to the input.2. Connect the load to the V OUT and ground terminals.The load can be either passive (resistive) or active (as in an electronic load). The user can place an ammeter between the load and the V OUT terminal. Make sure that the output voltage is monitored at the V OUT terminal.3. Enable the switchThe MIC2033-12AYxx evaluation boards are configured for default enable using a 10k Ω pull-up resistor from the ENABLE pin to VIN. To disable the switch, place a jumper short across the jumper pins at TP2. The MIC2033-05BYxx evaluation boards are configured for default disable. To enable the switch, place a jumper short across the jumper pins at TP2. 4. Fault detectionThe MIC2033 is equipped with an error flag, FAULT/. TP3 is provided to monitor the FAULT/ pin.Ordering InformationPart Number DescriptionMIC2033-05BYM6 EV Evaluation board featuring the MIC2033-05BYM6 500mA Switch MIC2033-12AYM6 EV Evaluation board featuring the MIC2033-12AYM6 1.2A Switch MIC2033-05BYMT EV Evaluation board featuring the MIC2033-05BYMT 500mA Switch MIC2033-12AYMT EVEvaluation board featuring the MIC2033-12AYMT 1.2A SwitchApplication InformationSoft-StartSoft-start reduces the power supply input surge current at startup by controlling the output voltage rise time. The input surge appears while the output capacitor is charged up. A slower output rise time draws a lower input surge current.During soft-start, an internal current sink discharges the external capacitor at CSLEW to ground to control the ramp of the output voltage. The output voltage rise time depends on the value of C CSLEW, the input voltage, output voltage, and the current limit. Micrel recommends that the value of the CSLEW external capacitor be in the range of 0.1µF to 1µF. For the MIC2033 evaluation board, CSLEW = C3 = 0.1µF. Output VoltageThe MIC2033 evaluation board is available with either a 0.5A or 1.2A fixed current limit. If the output current exceeds the current limit, the MIC2033 switch enters constant current limit mode. The maximum allowable current limit can be less than the full specified and/or expected current if the MIC2033 is not mounted on a circuit board with sufficiently low thermal resistance. The MIC2033 responds to short circuits within 10µs to limit the output current. It also provides an output fault flag that asserts (low) for an overcurrent condition that lasts longer than the overcurrent fault response delay time (t FAULT/), which is typically 32ms.MIC2033-xxxYMx Evaluation Board SchematicsMIC2033-xxxYMT Evaluation BoardMIC2033-xxxYM6 Evaluation BoardBill of MaterialsNumber Manufacturer Description Qty. Item PartC1608X5R0J105K TDK(1)C1, C21.0µF/6.3V ceramic capacitor, X5R, 0603 206036D105KAT2A AVX(2)06033C104KAT2A TDK0.1µF/25V ceramic capacitor, X7R, 0603 1C3C1608X7R1E104K AVXR1, R2 CRCW060310K0FKEA Vishay/Dale(3) 10.0kΩ, film resistor, 0603, 1% 2U1 MIC2033-xxxYMx Micrel(4)High-accuracy, high-side, fixed current limit power switch 1Notes:1. TDK: .2. AVX: .3. Vishay: .4. Micrel, Inc.: .Evaluation Board PCB LayoutMIC2033-xxxYMT Evaluation Board – Top LayerMIC2033-xxxYMT Evaluation Board – Bottom LayerEvaluation Board PCB Layout (Continued)MIC2033-xxxYM6 Evaluation Board – Top LayerMIC2033-xxxYM6 Evaluation Board – Bottom Layer。
轻骑兵音箱图片
"轻骑兵"----------有源音箱市场的领导者音乐顶级装备！红色为新品…木质结构。
轻骑兵”的代表作之一B1的加强版，整体木质结轻骑兵科技（北京）有限公司简介轻骑兵，一个视品质为生命的企业，一个积极求变，不断创新的企业……轻骑兵科技（北京）有限公司的前身是北京市中北高科机电公司，是北京理工大学校办科技产业的一员。
公司于1993年在北京成立，从1994年开始从事多媒体音频产品的研发制造，是北京市科学技术委员会认定的高新技术企业。
公司主要产品是“轻骑兵”系列多媒体有源音箱和数码娱乐电子产品，是中国最早的多媒体音频产品制造商，多媒体音箱行业的开创者，拥有很高的市场占有率和品牌知名度。
轻骑兵科技拥有强大的研发和生产实力，在北京和深圳设有研发中心，在深圳拥有制造基地，于1999年率先通过了ISO-9000国际质量管理体系认证，并于2007年取得了以质量审查严格而著称的英国皇家UKAS证书。
轻骑兵足迹·1994年，推出全国第一台有源音箱RDS-1000·1996年，“轻骑兵”音箱被中国保护消费者基金会认证为“中国消费者信得过产品”·1998年，公司被评为中关村海淀园区“50优新技术企业”和“重点扶持企业”·1998年，“轻骑兵”音箱被评为中关村海淀园区“百项表彰拳头产品”·1999年，首家推出应用USB通用串行总线技术的数字多媒体音箱，开创电脑数字音频先河·1999年，成为业界首家通过ISO－9000国际质量管理体系认证的企业·2000年，重炮出击推出国内第一款三分频多媒体音箱B1，又一次引领新技术潮流·2003年，在深圳建立第二个生产基地，生产规模大幅提升·2004年，推出国内第一部笔记本专用音箱X10，开拓移动便携音箱新时代·2005年，推出业内口碑最好的产品系列之一V23系列·2006年，推出2.0王者风采V3000，显示轻骑兵卓越的技术实力·2006年，推出国内第一部户外专用音箱U2,是专门为户外人士设计的音箱·2006年，推出最受用户和行业推崇的书架箱M7，引发2.0回归热潮·2007年，获得英国皇家认证机构的UKAS认证·2007年，深圳生产基地搬迁新址,产能比原来又有了大幅提升今天的“轻骑兵”今天，“轻骑兵”已成为有源音箱市场上的杰出品牌代表，并成为创新和经典的代名词。
Eaton Moeller E58 Thru-beam 光电传感器说明书
Eaton 135569Eaton Moeller® series E58 Thru-beam photoelectric sensor, receiver, Sn=6m, 4L, 10-30VDC, light/dark, NPN, PNP, M18, insulated material 12100AQD07General specificationsEaton Moeller® series E58 Thru-beam photoelectric sensor135569152.4 mm44.45 mm 152.4 mm 0.23 kgUL Category Control No.: NRKH, NRKH7CSA Class No.: 3211-07 CSA-C22.2 No. 14 CSA UL 508UL File No.: E117028 CECSA File No.: 50513 IEC/EN 60947-5-2 UL12100AQD07Product NameCatalog Number Product Length/Depth Product Height Product Width Product Weight CertificationsModel Code0 V7 ms18 mm30 A1Status indication of Switching state: Red LED Polyurethane (PUR)10 VOther0 V0 mmNone56 mmInsulated materialCylinder, screw-thread70 °C IL05305002ZDA-CS-90_28267_104DA-CD-90_28267_104DA-DC-00004652.pdfDA-DC-00004657.pdfeaton-proximity-switches-dimensions-003.eps eaton-proximity-switches-3d-drawing-002.epsRated control supply voltage (Us) at AC, 50 Hz - min Response timeDiameter sensorOperational current (Ib) in the switched state at 24 V DC Safety type (IEC 61496-1)LED indicatorCable sheath materialRated control supply voltage (Us) at DC - minInterface typeNumber of outputs (protected semiconductor)Rated control supply voltage (Us) at AC, 50 Hz - max Sensor heightExplosion safety category for gasSensor lengthSensor materialEnclosure typeAmbient operating temperature - maxWire size Installeringsinstruksjoner mCAD model Sertifiseringsrapporter TegningerTransmission range of the safety field0 mOpening angle0 °Switching frequency142 HzOutput current (mA) - max100 mASwitching voltage of OSSD at state high0 VFeaturesStraight beamRated control supply voltage (Us) at DC - max30 VVoltage rating - max30 VAmbient operating temperature - min-20 °CElectric connection typePlug-in connectionOutput current at protected output - max0 mALight dot size0 mm²Sensing modeLight-/dark switchingWidth sensor0 mmVoltage typeDCNumber of outputs (semiconductor with signaling function) 0Product categoryComet SeriesAdjustment typeManual adjustmentLoad currentMax. 100 mA (Ie, PNP)Max. 250 mA (Ie, NPN, 120 > 50°C)Rated switching distance (Sn)6000 mmOperating modeSwitching principle: Adjustable bright/dark switchingOptical surface materialPlasticLight typePolarity free red lightConnection type4-wirePlug-in connection M12 x 1Switch function typeProgrammable/configurableDegree of protectionNEMA 4IP67Number of outputs (protected contact energized)Number of contact energized outputs with signalling function 0Rated control supply voltage (Us) at AC, 60 Hz - min0 VDevice typeReceiverOperation agent-safety classSafety class 2FunctionsDetector (for combination with source)Short-circuit protectionThru-light beamProtection against polarity reversalSwitching output typePNPEnclosure materialPlasticEaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. Med enerett.Eaton is a registered trademark.All other trademarks are property of their respectiveowners./socialmediaNoneNone Optical sensors0 V0 mm0 nm100 g, Mechanical, Shock duration 3 ms 6000 mmExplosion safety category for dust Laser protection class TypeRated control supply voltage (Us) at AC, 60 Hz - max Reflector distance - min Wavelength of the sensor Shock resistanceSwitching distance - max。
Leica DISTO E7500用户手册说明书
Leica DISTO TM E7500 The original laser distance meterInstrument Set-up - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 Basic measuring screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Selection screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Multifunctional endpiece - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 Permament / Minimum-Maximum measuring- - - - - - - - - - - - - 5 Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - - 6 Settings - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7 Distance units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Beep ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 Digital level ON/OFF- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8 De-/Activate keylock- - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Switch on with keylock - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 Calibration of tilt sensor (Tilt Calibration) - - - - - - - - - - - - - - 10 Personalized favorites- - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Illumination- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11 Offset- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 Functions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 Timer- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14 Memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15 Measuring single distance - - - - - - - - - - - - - - - - - - - - - - - - - 15 Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - - - - - - 15Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -16 Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -17 Stake out- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -18 Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - -19 Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - -20 Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21 Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21 Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -21 Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - -21 Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - - - - - -21 Permitted use- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22 Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22 Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22 Limits of use- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22 Disposal- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -22 Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - -22 FCC statement (applicable in U.S.) - - - - - - - - - - - - - - - - - - -23 Laser classification- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -24 Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -24FUNC1x1x1xThis is a great help for outdoor measuring. The integratedpointfinder (viewscreen) shows the target on the display.The device measures in the middle of the cross hair, even ifthe laser dot is not visible.Parallax errors occur when the pointfinder camera is usedon close targets, with the effect that the laser appears dis-placed in the crosshair. In this case rely on the real laser dot.Overview12Distance units Beep Keypad lock Tilt calibration Favorites Illumination Offset Reset InformationDistance unitsBeep ON/OFFON OFF Digital level ON/OFFON OFFDe-/Activate keylockOFF ONCalibration of tilt sensor (Tilt Calibration)Personalized favoritesF avorite Illumination1/61/62/63/64/65/66/6 3OffsetConfirm:Timer12.208 m6.554 m23.889 m8.449 mMeasuring single distanceAim active laser at target.Smart Horizontal Mode40.8 °45.204 m0.032 m4.827 mArea20.276 m3.9I0 m 6.228 m 24.352 m2Volume2.431 m2.338 m 5.744 m 32.653 m316.164 m39.300 m 213.430 m 2Use Up/Down navigation keys to show more re-sults.0.240 m0.625 m0.240 m is missing up to next 0.625 m distance.Next stake out distance25.133 m21.383 m 13.207 m* applies for 100 % target reflectivity (white painted wall), low background illumination, 25 ºC** applies for 10 to 100 % target reflectivity, high background illumination, - 10 ºC to + 50 ºC*** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m, to 0.20 mm/m between 30 m to 100 m and to 0.30 mm/m for distances above 100 m **** applies for 100 % target reflectivity, background illumi-nation of approximately 30'000 lux***** after user calibration. Additional angle related devia-tion of +/- 0.01° per degree up to +/-45° in each quadrant. Applies at room temperature. For the whole operating temperature range the maximum deviation increases by +/-0.1°.For accurate indirect results, the use of a tripod is recommended. For accurate tilt measurements a transverse tilt should be avoided.Typical Measuring Tolerance*± 1.0 mm / ~1/16" ***Maximum Measuring Tolerance**± 2.0 mm / 0.08 in ***Typical Range*150 m / 500 ft Range at unfavourable condition ****80 m / 260 ft Smallest unit displayed 0.1 mm / 1/32 in Power Range Technology ™yesØ laser point at distances6 /30 / 60 mm (10 / 50 / 100 m)Measuring tolerance*****± 0.2°Range360°Laser class 2Laser type 635 nm, < 1 mW Protection class IP65 (dust tight and jet water protected)Autom. laser switch off after 90 s Autom. power switch-off after 180 sBattery durability (2 x AA)up to 5000 measure-mentsDimension (H x D x W)143 x 58 x 29 mm 5.6 x 2.28 x 1.14 in Weight (with batteries)198 g / 6.37 oz Temperature range:-Storage -Operation-25 to 70 °C -13 to 158 °F -10 to 50 °C 14 to 122 °FiDistance measuring yes Min/Max measuring yes Permanent measuring yes Stake-outyes Addition/Subtraction yes Area yes Volumeyes Painter function (area with partial measurem.)yes Pythagoras2-point Smart Horizontal Mode / Indirect height yes Memory 30 displays Beepyes Illuminated colour display yes Multifunctional endpiece yes Pointfinder (Viewscreen) 4xZoom Personalized Favorites yes TimeryesIf the message Error does not disappear after switching on the device repeatedly, contact the dealer.If the message InFo appears with a number, press the Clear button and observe the following instructions:•Clean the device with a damp, soft cloth.•Never immerse the device in water.•Never use aggressive cleaning agents orsolvents.Lifetime Manufacturer's WarrantyWarranty coverage for the entire usage timeof the product according to Leica Geosys-tems International Limited Warranty. Free ofcharge repair or replacement for all productsthat suffer defects as a result of faults in mate-rials or manufacturing, for the entire life ofthe product.3 Years no CostGuaranteed service should the productbecome defective and require servicingunder normal conditions of use, as describedin the user manual, at no additional charge.To receive the "3 years no cost" period, theproduct must be registered at www.leica-/registration within 8 weeksof the purchase date. If the product is notregistered, a "2 years no cost" period applies.The person responsible for the instrumentmust ensure that all users understand thesedirections and adhere to them.Areas of responsibilityResponsibilities of the manufacturerof the original equipment:Leica Geosystems AGHeinrich-Wild-StrasseCH-9435 HeerbruggInternet: The company above is responsible forsupplying the product, including the UserManual in a completely safe condition.The company above is not responsible forthird party accessories.Responsibilities of the person incharge of the instrument:•To understand the safety instructions onthe product and the instructions in theUser Manual.•To be familiar with local safety regulationsrelating to accident prevention.•Always prevent access to the product byunauthorised personnel.No.Cause Correction156Transverse tilt greaterthan 10°Hold the instrument without any transverse tilt.162Calibration mistake Make sure, the device isplaced on a absolutelyhorizontal and flat surface.Repeat the calibrationprocedure. If the mistakestill occurs, contact yourdealer.204Calculation error Perform measurementagain.252Temperature too high Let device cool down. 253Temperature too low Warm device up.255Received signal tooweak, measuring timetoo long Change target surface (e.g. white paper).256Received signal toohigh Change target surface (e.g. white paper).257Too much back-ground lightShadow target area.258Measurement outsideof measuring rangeCorrect range.260Laser beam inter-ruptedRepeat measurement.Permitted use•Measuring distances•Tilt measurementProhibited use•Using the product without instruction•Using outside the stated limits•Deactivation of safety systems and removal of explanatory and hazard labels•Opening of the equipment by using tools (screwdrivers, etc.)•Carrying out modification or conversion of the product•Use of accessories from other manufac-turers without express approval •Deliberate dazzling of third parties; also in the dark•Inadequate safeguards at the surveying site (e.g. when measuring on roads, construc-tion sites, etc.)•Deliberate or irresponsible behaviour on scaffolding, when using ladders, when measuring near machines which are running or near parts of machines or instal-lations which are unprotected•Aiming directly in the sun Hazards in useƽWARNINGWatch out for erroneous measurements ifthe instrument is defective or if it has beendropped or has been misused or modified.Carry out periodic test measurements.Particularly after the instrument has beensubject to abnormal use, and before, duringand after important measurements.ƽCAUTIONNever attempt to repair the product your-self. In case of damage, contact a local dealer.ƽWARNINGChanges or modifications not expresslyapproved could void the user’s authority tooperate the equipment.Limits of useRefer to section "Technical data".The device is designed for use in areaspermanently habitable by humans. Do notuse the product in explosion hazardous areasor in aggressive environments.DisposalƽCAUTIONFlat batteries must not be disposed of withhousehold waste. Care for the environmentand take them to the collection pointsprovided in accordance with national or localregulations.The product must not be disposed withhousehold waste.Dispose of the product appropriatelyin accordance with the national regu-lations in force in your country.Adhere to the national and country specificregulations.Product specific treatment and wastemanagement can be downloaded from ourhomepage.Electromagnetic Compatibility(EMC)ƽWARNINGThe device conforms to the most stringentrequirements of the relevant standards andregulations.Yet, the possibility of causing interference inother devices cannot be totally excluded.iFCC statement (applicable in U.S.)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-able protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interfer-ence will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCCRules. Operation is subject to the followingtwo conditions:•This device may not cause harmful interfer-ence, and•this device must accept any interferencereceived, including interference that maycause undesired operation.This device complies with Industry Canadalicense-exempt RSS standard(s). Operationis subject to the following two conditions:•This device may not cause interference and•this device must accept any interference,including interference that may causeundesired operation of the device.Cet appareil est conforme à la section 15 desrèglements FCC. Son fonctionnement estsoumis aux deux conditions suivantes :•cet appareil ne doit pas causer d'inter-férences nuisibles, et•cet appareil doit accepter toute autreinterférence reçue, y compris les inter-férences pouvant entraîner un fonc-tionnement non désiré.Ce dispositif est conforme à la norme RSS-210 d’Industrie Canada. L’utilisation estsujette aux deux conditions suivantes :•ce dispositif ne pas doit pas être la sourced’interférences nuisibles, et•ce dispositif doit accepter toutes les inter-férences, y compris les interférencespouvant induire des opérations nonsouhaitées.Laser classificationThe device produces visible laser beams, which are emitted from the instrument:It is a Class 2 laser product in accordance with:•IEC60825-1 : 2014 …Radiation safety of laser products“Laser Class 2 products:Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex.ƽWARNINGLooking directly into the beam with optical aids (e.g. binoculars, telescopes) can be hazardous.ƽCAUTIONLooking into the laser beam may be hazardous to the bellingSubject to change (drawings, descriptions and technical data) without prior notice. Descripiton Value Wavelength635 nm Maximum radiant outputpower for classifiacation0.95 mW Pulse repetitionfrequency320 MHz Pulse duration> 400 ps Beam divergence0.16 x 0.6 mradLeica Geosystems AG CH-9435 Heerbrugg (Switzerland) Leica Geosystems AG, Heerbrugg, Switzerland has been certified as being equipped with a quality system which meets the International Standards of Quality Management and Quality Systems (ISO standard 9001) and Environ-mental Management Systems (ISO standard 14001).Copyright Leica Geosystems AG, Heerbrugg,Switzerland 2014Original text (820692 EN)Pat. No.:WO 9427164, WO 9818019, WO 0244754, WO 0216964, US 5949531, EP 1195617, US 7030969, US 8279421 B2。
evolution wireless G4 ew 100 G4-ME2 835-S 产品说明书
FEATURES• Engineered for professional live sound:Rugged all-in-one combo wireless system for singers, presenters and moderators.• Dynamic handheld microphone e 835, robust bodypack transmitter and unobstrusive clip-on microphone ME 2-II (omni-directional) with high speech intelligibility for daily use on stage• True diversity half-rack receiver in a full-metal housing with intuitive LCD display for full control• Easy and flexible wireless synchronization between transmitter and receiver via infrared• Fast frequency allocation for up to 12 receivers via new linking functionality• Up to 20 compatible channels• Up to 42 MHz bandwidth with 1680 selectable frequen-cies, fully tunable in a stable UHF range• Transmission Range: up to 100 meters / 300 feet• High RF output power (up to 30 mW) depending on country regulations DELIVERY INCLUDES• EM 100 G4• SK 100 G4• SKM 100-S G4• MMD 835-1• ME 2• GA 3• MZQ 1 microphone clamp• power supply• 4 AA batteries• antennen• RJ 10• quick guide• safety guide• manufacturer declaration sheet • frequency supplement sheetVersatile wireless systems for those who sing, speak or play instruments with up to 42 MHz tuning bandwidth in a stable UHF range and fast, simultaneous setup of up to 12 linked systems.Dynamic handheld microphone e 835, robust bodypack transmitter and easy clip-on microphone ME 2-II (omni-directio-nal) with high speech intelligibility for daily use on stage.SPECIFICATIONSEM 100 G4RF characteristicsModulation Wideband FM Frequency ranges A1: 470 - 516 MHzA: 516 - 558 MHzAS: 520 - 558 MHzG: 566 - 608 MHzGB: 606 - 648 MHzB: 626 - 668 MHzC: 734 - 776 MHzD: 780 - 822 MHzE: 823 - 865 MHzJB: 806 - 810 MHzK+: 925 - 937.5 MHz1G8: 1785 - 1800 MHz Receiving frequencies Max. 1680 receivingfrequencies, adjustable in25 k Hz steps20 frequency banks, eachwith up to 12 factory-presetchannels, no intermodula-tion1 frequency bank with up to12 programmable channels Switching bandwidth up to 42 MHzNominal/peak deviation±24 kHz / ±48 kHz Receiver principle True diversitySensitivity (with HDX, peak deviation)< 2.5 μV for 52 dBAeff S/NAdjacent channel selection Typically ≥ 65 dB Intermodulation attenua-tionTypically ≥ 65 dB Blocking≥ 70 dB Squelch low: 5 dBμVmiddle: 15 dBμVhigh: 25 dBμVPilot tone squelch Can be switched off Antenna inputs 2 BNC socketsAF characteristicsCompander system Sennheiser HDXEQ presets (switchable,act on line and monitoroutputs)Preset 1: FlatPreset 2:Low Cut (-3 dB at 180 Hz)Preset 3:Low Cut/High Boost(-3 dB at 180 Hz,+6 dB at 10 kHz)Preset 4:High Boost(+6 dB at 10 kHz)Signal-to-noise ratio (1 mV,peak deviation)≥ 110 dBATotal harmonic distortion(THD)≤ 0.9 %AF output voltage (at peakdeviation, 1 kHz AF)6.3 mm jack socket(unbalanced): +12 dBuXLR socket(balanced): +18 dBu Setting range “AF Out”48 dB (3 dB steps) Overall deviceTemperature range-10 °C to +55 °CPower supply12 V DCCurrent consumption300 mADimensions Approx. 190 x 212 x 43 mm Weight Approx. 980 gCONNECTIONSSPECIFICATIONSSK 100 G4RF characteristicsModulation Wideband FM Frequency ranges A1: 470 - 516 MHzA: 516 - 558 MHzAS: 520 - 558 MHzG: 566 - 608 MHzGB: 606 - 648 MHzB: 626 - 668 MHzC: 734 - 776 MHzD: 780 - 822 MHzE: 823 - 865 MHzJB: 806 - 810 MHzK+: 925 - 937.5 MHz1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receivingfrequencies, adjustable in25 k Hz steps20 frequency banks, eachwith up to 12 factory-presetchannels, no intermodula-tion1 frequency bank with up to12 programmable channels Switching bandwidth up to 42 MHzNominal/peak deviation±24 kHz / ±48 kHz Frequency stability≤ ±15 ppmRF output power at 50 ΩMax. 30 mWPilot tone squelch Can be switched off AF characteristicsCompander system Sennheiser HDXAF frequency response Mic: 80 – 18,000 HzLine: 25 – 18,000 Hz Signal-to-noise ratio (1 mV,peak deviation)≥ 110 dBATotal harmonic distortion(THD)≤ 0.9 %Max. microphone/lineinput voltage3 VeffMicrophone/line inputimpedance40 kΩ, unbalanced / 1 MΩInput capacitance SwitchableSetting range for inputsensitivity60 dB,adjustable in 3 dB steps Overall deviceTemperature range-10 °C to +55 °CPower supply 2 AA batteries, 1.5 V orBA 2015 accupack Nominal voltage 3 V battery /2.4 V rechargeable battery Current consumption at nominal voltage:typ. 180 mAwith transmitter switchedoff: ≤ 25 μAOperating time Typically 8 h Dimensions Approx. 82 x 64 x 24 mm Weight (incl. batteries)approx. 160 gSPECIFICATIONSME 2Transducer principle pre-polarized condensormicrophonePick-up pattern omni-directional Sensitivity (free field, noload) (1 kHz)20 mV/PaMax. SPL at 1 kHz130 dBFrequency response50 to 18,000 Hz Equivalent noise levelA-weighted (DIN IEC 651)36 dBConnector 3.5 mm jackCable length approx. 1.60 mSupply voltage7.5 VSPECIFICATIONSSKM 100 G4-SRF characteristicsModulation Wideband FM Frequency ranges A1: 470 - 516 MHzA: 516 - 558 MHzAS: 520 - 558 MHzG: 566 - 608 MHzGB: 606 - 648 MHzB: 626 - 668 MHzC: 734 - 776 MHzD: 780 - 822 MHzE: 823 - 865 MHzJB: 806 - 810 MHzK+: 925 - 937.5 MHz1G8: 1785 - 1800 MHz Transmission frequencies Max. 1680 receivingfrequencies, adjustable in25 k Hz steps20 frequency banks, eachwith up to 12 factory-presetchannels, no intermodula-tion1 frequency bank with up to12 programmable channels Switching bandwidth up to 42 MHzNominal/peak deviation±24 kHz / ±48 kHz Frequency stability≤ ±15 ppmRF output power at 50 ΩMax. 30 mWPilot tone squelch Can be switched off AF characteristicsCompander system Sennheiser HDXAF frequency response80 – 18,000 HzSignal-to-noise ratio (1 mV,peak deviation)≥ 110 dBATotal harmonic distortion(THD)≤ 0.9 %Max. input voltage 3 VeffInput impedance40 kΩInput capacitance SwitchableSetting range for inputsensitivity48 dB,adjustable in 6 dB steps Overall deviceTemperature range-10 °C to +55 °CPower supply 2 AA batteries, 1.5 V orBA 2015 accupack Nominal voltage 3 V battery /2.4 V rechargeable battery Current consumption at nominal voltage:typ. 180 mAwith transmitter switchedoff: ≤ 25 μAOperating time Typically 8 h Dimensions Approx. Ø 50 x 265 mm Weight (incl. batteries)approx. 450 gSPECIFICATIONSMMD 835-1Transducer principle dynamic Sensitivity 2.1 mV/Pa Sound pressure level154 dB SPL Pick-up pattern cardioidPRODUCT VARIANTSMade in Germanyew 100 G4-ME2-835-S-A1470 - 516 MHz Art. no. 507577 ew 100 G4-ME2-835-S-A516 - 558 MHz Art. no. 507578 ew 100 G4-ME2-835-S-GB606 - 648 MHz Art. no. 507579 ew 100 G4-ME2-835-S-G566 - 608 MHz Art. no. 507580 ew 100 G4-ME2-835-S-B626 - 668 MHz Art. no. 507581 ew 100 G4-ME2-835-S-C734 - 776 MHz Art. no. 507582 ew 100 G4-ME2-835-S-E823 - 865 MHz Art. no. 507583 ew 100 G4-ME2-835-S-1G81785 - 1800 MHz Art. no. 507584 Assembled in USAew 100 G4-ME2-835-A1470 - 516 MHz Art. no. 507922 ew 100 G4-ME2-835-A516 - 558 MHz Art. no. 507923 ew 100 G4-ME2-835-AS520 - 558 MHz Art. no. 507924 ew 100 G4-ME2-835-G566 - 608 MHz Art. no. 507925 ew 100 G4-ME2-835-B626 - 668 MHz Art. no. 507926 ew 100 G4-ME2-835-C734 - 776 MHz Art. no. 507927 ew 100 G4-ME2-835-D780 - 822 MHz Art. no. 507928DIMENSIONS EM 100 G4DIMENSIONS3,5mm Klinke 3,5mm plugDIMENSIONS SKM 100 G4-SARCHITECT‘S SPECIFICATIONA wireless RF transmission system consisting of a stationary receiver, a bodypack transmitter with a clip-on microphone and a radio microphone with a cardioid dynamic microphone head.The system shall operate within twelve UHF frequency ranges, with a switching bandwidth of up to 42 MHz: 470 –516 M Hz, 516 – 558 MHz, 520 – 558 MHz, 566 – 608 M Hz, 606 – 648 MHz, 626 – 668 MHz, 734 – 776 MHz, 780 – 822 M Hz, 823 – 865 MHz, 806 – 810 MHz, 925 – 937.5 M Hz, 1785 – 1800 MHz; receiving frequencies shall be 1,680 per range and shall be tunable in 25 kHz steps. The system shall feature 20 fixed frequency banks with up to 12 compatible frequency presets and 1 user bank with up to 12 user programmable frequencies.The receiver shall be menu-driven with a backlit LC display showing the current frequency, frequency bank and channel number, metering of RF level, metering of AF level, lock status, pilot tone evaluation, muting function, and battery status of the associated transmitter. An auto-lock feature shall be provided to prevent settings from being accidentally altered. The receiver shall feature an integrated guitar tuner and shall provide a sound check mode.Some receiver parameters such as receiving frequency, receiver name and pilot tone setting shall be synchronizable with the associated transmitter via an integrated infrared interface.The receiver shall feature a balanced XLR-3M audio output with a maximum output of +18 dBu along with an unbalanced ¼" (6.3 mm) audio output with a maximum output of +12 dBu. The receiver shall have two DATA ports (RJ 10) to set up a multichannel system. Two BNC-type input sockets shall be provided for connecting the antennas.Nominal/peak deviation shall be ±24 kHz/±48 kHz. Squelch threshold shall be adjustable to three levels: Low (5 dBμV), Middle (15 dBμV) and High (25 dBμV).The receiver shall incorporate the Sennheiser HDX compander system and a defeatable pilot tone squelch. Sensitivity shall be < 2 μV for 52 dBA eff S/N with HDX engaged at peak deviation. Adjacent channel rejection shall be ≥ 65 d B (ty-pical). Intermodulation attenuation shall be ≥ 65 d B (typical); blocking shall be ≥ 70 dB. Four selectable equalizer presets shall be provided: “Flat”, “Low Cut” (−3 d B at 180 Hz), “Low Cut/High Boost” (−3 d B at 180 H z/+6 dB at 10 kHz) and “High Boost” (+6 dB at 10 k Hz).Signal-to-noise ratio at 1 mV and peak deviation shall be ≥ 110 dBA. Total harmonic distortion (THD) shall be ≤ 0.9 %. The audio output level shall be adjustable within a 48 d B range in steps of 3 dB.The receiver shall operate on 12 V power supplied from the NT 2-3 CW mains unit (for 100 – 240 V AC, 50/60 Hz). Power consumption shall be 300 mA. The receiver shall have a rugged metal housing; dimensions shall be approximately 190 x 212 x 43 mm (7.48" x 8.35" x 1.69"). Weight shall be approximately 980 grams (2.16 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131 °F).The receiver shall be the Sennheiser EM 100 G4.The bodypack transmitter shall be menu-driven with a backlit LC display showing the current frequency, frequency bank and channel number, metering of AF level, transmission status, lock status, pilot tone transmission, muting function, and battery status. An auto-lock feature shall be provided to prevent settings from being accidentally altered.The transmitter parameters shall either be configurable in the associated receiver’s menu and synchronized with the transmitter via an integrated infrared interface or shall be programmable in the transmitter menu.The transmitter shall be equipped with a mute switch, which shall be switchable between “AF on/off”, “RF on/off” and “Disabled” via the user interface.Nominal/peak deviation shall be ±24 kHz/±48 kHz. Frequency stability shall be ≤ ±15 ppm. RF output power at 50 Ω shall be 30 mW (typical).The transmitter shall incorporate the Sennheiser HDX compander system and a defeatable pilot tone squelch. Audio fre-quency response shall range from 80 – 18,000 H z (microphone) or 25 - 18,000 Hz (line). Signal-to-noise ratio at 1 mV and peak deviation shall be ≥ 110 dBA. Total harmonic distortion (THD) shall be ≤ 0.9 %. Input sensitivity shall be adjustable within a 60 dB range in steps of 3 dB.Power shall be supplied to the transmitter by two 1.5 V A A size batteries or by one Sennheiser BA 2015 rechargeable accupack. Nominal voltage shall be 2.4 V for a rechargeable battery or 3 V for a battery, current consumption shall be typical 180 mA at nominal voltage; ≤ 25 μA when transmitter is switched off. Operating time shall be typical 8 h ours. The transmitter shall have a rugged metal housing; dimensions shall be approximately 82 x 64 x 24 mm (3.23" x 2.52" x 0.94"). Weight including the batteries shall be approximately 160 grams (0.35 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131 °F).The bodypack transmitter shall be the Sennheiser SK 100 G4.The radio microphone shall be menu-driven with a backlit LC display showing the current frequency, frequency bank and channel number, metering of AF level, transmission status, lock status, pilot tone transmission, muting function, and bat-tery status. An auto-lock feature shall be provided to prevent settings from being accidentally altered.The radio microphone parameters shall either be configurable in the associated receiver’s menu and synchronized with the radio microphone via an integrated infrared interface or shall be programmable in the radio microphone menu. Recei-ver parameters such as receiving frequency, receiver name and pilot tone setting shall be synchronizable with the radio microphone via an integrated infrared interface.The handheld vocal radio microphone shall be equipped with a mute switch, which shall be switchable between “AF on/ off”, “RF on/off” and “Disabled” via the user interface.Nominal/peak deviation shall be ±24 kHz/±48 kHz. Frequency stability shall be ≤ ±15 ppm. RF output power at 50 Ω shall be 30 mW (typical).The radio microphone shall incorporate the Sennheiser HDX compander system and a defeatable pilot tone squelch. Audio frequency response shall range from 80 – 18,000 Hz. Signal-to-noise ratio at 1 mV and peak deviation shall be ≥ 110 dBA. Total harmonic distortion (THD) shall be ≤ 0.9 %. Input sensitivity shall be adjustable within a 48 dB range in steps of 6 dB.Power shall be supplied to the radio microphone by two 1.5 V AA size batteries or by one Sennheiser BA 2015 recharge-able accupack. Nominal voltage shall be 2.4 V, current consumption shall be typical 180 mA at nominal voltage; ≤ 25 μA when radio microphone is switched off. Operating time shall be typical 8 hours. The radio microphone shall have a rugged metal housing; dimensions shall be approximately 50 mm (1.97") in diameter and 265 mm (10.43") in length. Weight inclu-ding the batteries shall be approximately 450 grams (0.99 lbs). Operating temperature shall range from −10 °C to +55 °C (+14 °F to +131 °F).A range of microphone heads shall be available for the radio microphone.The radio microphone shall be the Sennheiser SKM 100-S G4.。
ADAM AUDIO A7X、SUB8和SUB-15音频监听器说明书
Follow Us!ADAM AUDIO A7X, SUB8 & SUB-15 STUDIO MONITORS The A7X matches the X-ART (Extended Accelerated Ribbon Technology – up z) tweeter with a state-of-the art 7" woofer. The woofer has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power of its predecessor. This combination produces an amazing A7X SUB8The F5 and F7 near-field monitors feature a newly designed version of the ADAM proprietary Accelerating Ribbon duce high frequencies with airiness, clarity, and detail The A3X is the smallest monitor offered by Adam, and is perfectly suited for all environments where space is ers directly. The front of the A3X sports dual ports for low frequency response down to 60Hz as well as power and gain controls. The rear panel includes balanced (XLR) jacks, unbalanced (RCA) jacks, and tweeter ers allowing you to control the overall stereo volume of the system from either speakers gain control. The A3X features the X-ART tweeter (Accelerating Ribbon Prices subject to change without notice. Call today or visit us online!KIT ACTIVe STUDIO MO NITO RS These monitors feature improved speaker voicing, a recessed high-frequency waveguide, and new 1" neodymium “Soft Dome” tweeters. The curved front surface prevents diffraction issues that arise from rectangular designs. Other features include an active crossover, high frequency output level adjustment, front-firing bass ports, and input volume control. Features KRK’s signature woven-glass yellow woofers with a tight, clear low-end response. RP10-3 offers a unique rotatable housing that allows the acoustic axis to maintain orientation regardless of mounting position. Sold as single unitsITEM DESC R IPTION P R ICE ......................5" 2-way active monitor , 50W (each) .........................................149.50......................6" 2-way active monitor, 73W (each) ..........................................199.50......................8" 2-way active monitor, but 100W (each) ..................................249.50......................10" 3-way active monitor, 140W (each) ......................................499.00154Follow Us!We Stock Thousands of Common and Hard-to-Find Parts! Search for Parts on our website: /parts A 5.2" Crimson woofer and tuned 1" urethane film-laminated polyester fiber dome tweeter are combined with a digital FIR-type filter to reproduce sounds faithfully in these bi-amped near-field monitors. The rear panel offers an XLR-1/4" combo jack and RCA input as well as flexible 44-step FOSTeX PM641 & PM841 STUDIO MONITORS fied monitors come with a built-in channel divider that provides ideal overlapped frequency crossover points. The woofer and midrange drivers are constructed of highly elastic Kevlar, while the tweeter diaphragm fier with a 4" full-range driver in a compact monitor, the 6301 series is the perfect choice for a multitude of settings. The 6301B monitors accept any line-level signal and have an additional XLR input as well as an external headphone jack. The 6301D adds AES/EBU digital inputs. P R ICE FOSTeX RM2 RACKMOUNT STeReO MONITOR A 1RU magnetically shielded GeNeleC 8200/7200 BIAMPlIFIeD DSP MONITORING SYSTeMS 82407270N e W !N e Wvides ultra-flat response, extraordinary SPL capability, andtechnology to optimize performance in any size production environment. All models are shielded, ready for mounting andTHX® pm3™ approved. Linear Spatial Reference Technology ensures that the speakers sound flat at the mix position. The LSR6328P and LSR6312SP Subwoofer are equipped with RMC – JBL’s ingenious method of zeroing-out bass problems at the mix position caused by room modes. A built-in 1/10th octave parametric equalizer allows you to correct problems below 100Hz. The LSR6325P and LSR6332 enjoy the benefits of RMC (Room Mode Correction) when used in a system with the LSR6312SP Subwoofer. Enclosures are reinforced and mounting fessional featureset make the Control 2P ideal for desktop recording and video production, AV presentations, professional broadcast applications, and monitoring of electronic musical instruments. The 5.25" woofers and .75" dome tweeters are paired with a 35W per channel amplifier. XLR and GeNeleC M-SeRIeSRS156Follow Us!Commercial Lease-To-Own financing for businesses available! Contact your Sales Pro for details.MACKIe MR-MK3 SeRIeSACTIVe ReFeReNCeMONITORS Mackie’s MRmk3 powered stu-dio monitors are specifically voiced to reveal the full range and natural character of your music. Optimized features include an enhanced waveguide system for a wider sweet spot and custom-tuned rear porting for smooth, extended bass response. MR5-MK3 has a 5.25" LF driver, 1" silk-dome HF driver and 50W of power. MR6-MK3 has a 6.5" LF driver, 1" silk-dome HF driver and 65W of power. MR8-MK3 has an 8" LF driver, 1" silk dome HF driver and 85W of power. Lastly, the MR10S-MK3 subwoofer has a 10" glass aramid composite LF driver and 120W of power.ITEM DESC R IPTION P R ICE MR5-MK3 ..................Active monitor, 5.25" 2-way, 50W ...............................................149.99MR6-MK3 ..................Active monitor, 6.5" 2-way, 65W .................................................199.99MR8-MK3 ..................Active monitor, 8" 2-way, 85W ....................................................249.99MR10S-MK3 ..............Active sub, 10", 120W .................................................................349.99M3-6 AND M3-8 Superior three-way sound, improved fidelity, enhanced imaging and a super-wide sweet spot are a few features of these active monitors. With the mid- and high-frequency drivers mounted inline, the sound is presented on the same focal plane, allowing for improved time-alignmentMONKeY BANANA TURBO SeRIeSDIGITAl ACTIVe NeAR-FIelD MONITORS These enclosures were designed as a non-regular hexagon instead of the typical rectangle in order to minimize standing waves inside the enclosure. High-density fiberboard (MDF) is used for the enclosure to not only damp out unwanted reso-nances, but to ensure a solid and inert structure for driver mounting. All internal surfaces are lined with blended wool to further dampen the structure of the speaker cabinet. The Turbo 4 has 30W LF and 20W HF amplifiers with 4" and 1" drivers. The Turbo 5 has 50W LF and 30W HF amplifiers with 5" and 1" drivers. The Turbo 6 has 60W LF and 30W HF amplifiers with 6.5" and 1" drivers. The Turbo 8 has 80W LF and 30W HF amplifiers with 8" and 1" drivers. All LF drivers are constructed of PP carbon fiber/ceramic composite cones and all HF drivers consist of high quality 1" silk tweeters.ITEM DESC R IPTION P R ICE MB230046.................Active digital near field monitor, 5.5", black ..............................299.99MB230039.................As above, in red ..........................................................................299.99MB230060.................Active digital near field monitor, 6", black .................................399.99MB230053.................As above, in red ..........................................................................399.99MB230107.................Turbo 10 active digital subwoofer, 10", black .............................999.99MB230091.................As above, in red ..........................................................................999.99N e W N e W !N e W !TANNOY ReVeAl SeRIeS ACTIVe MONITORS Decades of speaker design experience has gone into these compact, yet powerful active near-field monitors that perform well above their price range. Some features include a wide and detailed sweet spot, front-firing bass port, speaker position compensation, volume and EQ controls, 1/8" Aux in jack for tablets and smartphones, active crossover filter and isolating padded rubber base. The 50W REVEAL-402 has a 56Hz-48kHz frequency response, due to its 4" woofer and 3/4" soft dome tweeter while the 100W REVEAL-802 generates from 42Hz-43kHz courtesy of its 8" woofer and 1" soft dome tweeter. I/O includes XLR and 1/4" inputs, 1/8" aux in and 1/8" monitor link.ITEM DESC R IPTION P R ICE REVEAL-402 ..............4" 2-way active monitor, 50W .....................................................139.99REVEAL-802 ..............8" 2-way active monitor, 100W ...................................................279.99eVe AUDIO 2-WAY P O WeReD M O NIT O RS Quality powered monitors with high resolution DSP, a rear rectangular port for efficient low frequencies, a PMW amp that features plenty of power and proprietary AMT tweeters (Air Motion Transfer). The SC204 is the smallest speaker in this line, with threaded screw inserts on the bottom for mic stand mounting and a 4" SilverCone woofer with honeycomb structured diaphragm. The SC205 has a 5" honeycomb woofer, and also includes threaded mounting inserts on the bottom. The SC207 has a 6.5" honeycomb woofer with extended bass. The SC208 has an 8" woofer with extended lows down to 36Hz, potentially removing the need for an external subwoofer. All speakers have RCA and XLR inputs. Visit to see the full EVE Audio line.ITEM DESC R IPTION P R ICE SC204 .......................2-way active monitor, 64Hz-21kHz (each) ..................................429.00SC205 .......................5" 2-way active monitor, 53Hz-21kHz (each) ..............................579.00SC207 .......................6.5" 2-way active monitor, 44Hz-21kHz (each) ...........................849.00SC208 .......................8" 2-way active monitor, 36Hz-21kHz (each) ..............................999.00ACTUAl™ bines DSP time-correction and point source powered Fulcrum Acoustic's TQ™ Temporal YAMAHA HS SeRIeS POWeReD MONITORS These near-field studio reference monitors are the active descendants of the NS-10M’s that so many people use for referencing their mixes. They are available in three sizes: 5", 6.5" and 8". The HS5 is a 70 watt monitor with 5" woofer. The HS7 95 watt monitor has a 6.5" woofer. The HS8 has 150 watts into an 8" woofer. All three monitors are bi-amped and have a 1" dome tweeter and feature white cone woofers, room control, EQ high trim, and room con-trol switches. Connections include one XLR and one 1/4" input. HS8S is a companion 120W, 8" bass-reflex subwoofer. Controls for the HS8S include master level, phase and low/high cutoff frequency. Connections include two XLR inputs, two 1/4" inputs and three balanced XLR outputs.ITEM DESCR IPTION PR ICE HS5 ...........................5" active studio monitor (each) ...................................................199.99!。
Philips 电子刮胡刀 S9031 21 产品说明书
Shaver series 9000V-Track Precision Blades8-directionContourDetectHeadsSmartClick precision trimmerS9031/21Perfection in every passCuts up to 20% more hair* in a single passThe Shaver 9000 is our most advanced shaver yet. The unique contour detecttechnology offers exceptional coverage over every contour of your face, and theV-Track system guides hairs into the best cutting position for the closest results.Designed for perfectionBlades perfectly guide hairs into position for a close shaveHeads flex in 8 different directions for a superb resultA comfortable shaveGet a comfortable dry or refreshing wet shave with AquatecEasy to useIntuitive icons make the functions easy to use50 minutes cordless shaving after a one-hour chargeShaver can be rinsed clean under the tapWith 2 year guaranteeGet the most of your shaverClick-on trimmer for perfect mustache and sideburn trimmingHighlightsV-Track precision blade systemGet the prefect close shave. The V-TrackPrecision Blades gently positions each hair in the best cutting position, even the flat laying and different length of hairs. Cuts 30% closer in less strokes leaving your skin in great condition.8-direction ContourDetectHeadsFollow every contour of your face and neck with 8-directional ContourDetect heads. You'll catch 20% more hairs with every pass.Resulting in an extremely close, smooth shave.Aquatec Wet & DryChoose how you prefer to shave. With the Aquatec Wet & Dry seal, you can opt for a quick yet comfortable dry shave. Or you can shave wet – with gel or foam – even under the shower.SmartClick precision trimmerClick on our skin-friendly Precision Trimmer to finish your look. It’s ideal for maintaining your mustache and trimming your sideburns.3 level LED displayThe intuitive display shows relevantinformation, enabling you to get the best performance out of your shaver: - 3-level battery and travel lock indicators - Cleaning Indicator - Battery Low Indicator -Replacement Head Indicator50 minutes of cordless shavingOur advanced charging system gives you twoconvenient options: charge for one hour and you’ll get 50 minutes of running time, or do a quick charge for one full shave. All 9000Series Shavers contain a powerful energy-efficient, long-lasting lithium-ion battery. They are designed to operate only in cordless mode,to ensure you’ll always be safe when shaving with water, even under the shower.Fully washable shaverSimply open the shaver head to rinse itthoroughly under the tap.iF DESIGN AWARD 2015Shaver series 9000Precision, control and maneuverability are the defining features of the 9000 shaver. The V-Track system guides hairs into the best cutting position for the closest result, while fully flexible eightdirectional heads catch more hairs for a clean shave in fewer strokes. The “AquaTec Wet &Dry” seal of this shaver allows for acomfortable dry shave or a refreshing wet shave, using a shaving gel or foam for extraskin comfort.Philips Green LogoPhilips Green Products can reduce costs,energy consumption and CO2 emissions. How?They offer a significant environmentalimprovement in one or more of the Philips Green Focal Areas – Energy efficiency,Packaging, Hazardous substances, Weight,Recycling and disposal and Lifetime reliability.SpecificationsShaving PerformanceShaving system: V-Track Precision Blade System, Super Lift & Cut Action Contour following: 8-direction ContourDetectHeadsSkinComfort: AquaTec Wet & Dry AccessoriesSmartClick: Precision trimmerPouch: Travel pouch Ease of useDisplay: 3 level battery indicator, Cleaningindicator, Battery low indicator, Replaceshaving heads indicator, Travel lock indicatorCleaning: Fully washableDesignColor: Black SatinHandle: Ergonomic grip & handlingPowerBattery Type: Lithium-ionRun time: 50 min / 17 shavesCharging: 1 hour full charge, Quick charge for 1shaveAutomatic voltage: 100-240 VMax power consumption: 9 WStand-by power: 0.1 WService2-year guaranteeReplacement head: Replace every 2 yrs withSH90* Cuts up to 20% more hair - versus SensoTouch© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2019‑08‑01 Version: 4.0.1。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
© Pearson Education, Inc. publishing as Prentice Hall
3-13
Example: BV ≠ FV but Cost = FV
Piper acquires 100% of Sandy for $310. Sandy BV FV BV = 100 + 145 = $245 Cash $40 $40 FV = 385 – 75 = $310
Piper's elimination worksheet entry: Capital stock 100 Retained earnings 145 Inventory 25 Plant 40 Investment in Sandy
© Pearson Education, Inc. pall
© Pearson Education, Inc. publishing as Prentice Hall 3-8
An Introduction to Consolidated Financial Statements
3: Parent Company Recording
© Pearson Education, Inc. publishing as Prentice Hall
Chapter 3: An Introduction to Consolidated Financial Statements
by Jeanne M. David, Ph.D., Univ. of Detroit Mercy to accompany Advanced Accounting, 10th edition by Floyd A. Beams, Robin P. Clement, Joseph H. Anthony, and Suzanne Lowensohn
© Pearson Education, Inc. publishing as Prentice Hall 3-5
An Introduction to Consolidated Financial Statements
2: Subsidiaries
© Pearson Education, Inc. publishing as Prentice Hall
$320 $385
Cost 100% BV Excess of cost over BV
$310 245 $65
© Pearson Education, Inc. publishing as Prentice Hall
Piper and Sandy (cont.)
Allocate to: Inventory 100%(+25) Plant 100%(+40) Total Amt Amort. 25 1st yr 40 10 yrs $65
Receivables Inventory Plant, net Total Liabilities Capital stock Retained earnings Total 30 50 200 $75 100 145 $320
3-14
30 75 240 $75
Cost – FV = $0 goodwill
3-12
Cost, Fair Value and Book Value
Acquisition cost, fair values of identifiable net assets and book values may differ. – Allocate excess or deficiency of cost over book value and determine goodwill, if any. – When BV = FV, excess is goodwill. Cost less BV = Excess to allocate – Allocate first to FV-BV differences – Remainder is goodwill (or bargain purchase)
3-11
Cash $20 Other curr. assets 45 Net plant 60 Investment in Skelly 40 Total $165 Accounts payable $20 Other curr. liabilities 25 Capital stock 100 Retained earnings 20 Total $165
3-9
Penn Example: Acquisition Cost = Fair Value = Book Value
Skelly BV=FV Cash Other current assets Net plant assets Total Accounts payable Other liabilities Capital stock Retained earnings Total $10 15 40 $65 $15 10 30 10 $65 Penn acquires 100% of Skelly for $40, which equals the book value and fair values of the net assets acquired. Cost of acquisition $40 Less 100% book value 40 Excess of cost over book value $0 To consolidate, eliminate Penn's Investment account and Skelly's capital stock and retained earnings.
3-10
© Pearson Education, Inc. publishing as Prentice Hall
Balance sheets
Separate Consolidated Penn Skelly Penn & Sub. $10 15 40 0 $65 $15 10 30 10 $65 $30 60 100 0 $190 $35 35 100 20 $190
3-6
Who is a Subsidiary?
• ARB No. 51 allowed broad discretion • FASB Statement No. 94 – Control based on share ownership • FASB Statement No. 160 – Financial control • Subsidiaries, or affiliates, continue as separate legal entities and reporting to their controlling and noncontrolling interests.
3-4
Business Acquisitions
• FASB Statement 141R • Business combinations occur – Acquire controlling interest in voting stock – More than 50% – May have control through indirect ownership • Consolidated financial statements – Primarily for owners & creditors of parent – Not for noncontrolling owners or subsidiary creditors
© Pearson Education, Inc. publishing as Prentice Hall 3-3
An Introduction to Consolidated Financial Statements
1: Benefits & Limitations
© Pearson Education, Inc. publishing as Prentice Hall
© Pearson Education, Inc. publishing as Prentice Hall 3-2
Objectives (continued)
5. Learn the concept of noncontrolling interest when the parent company acquires less than 100% of the subsidiary's outstanding common stock. 6. Amortize the excess of the fair value over the book value in periods subsequent to the acquisition. 7. Prepare consolidated balance sheets subsequent to the date of acquisition, including preparation of elimination entries. 8. Apply the concepts underlying preparation of a consolidated income statement.
© Pearson Education, Inc. publishing as Prentice Hall 3-7
Consolidated Statements
• Prepared by the parent company • Parent discloses – Consolidation policy, Reg. S-X – Exceptions to consolidation, temporary control and inability to obtain control • Fiscal year end – Use parent's FYE, but – May include subsidiary statements with FYE within 3 months of parent's FYE. • Disclose intervening material events