MSDS of CR-103C-1(E)

MSDS No.1 PRODUCT AND COMPANY IDENTIFICATIONProduct NameProduct Code SUPPLIER Name TOYOBO Co., Ltd.Address2-8, Dojima Hama 2-chome, Kita-Ku, OSAKA, 530-8230, JAPAN Emergency Telephone No.+81-6-6348-3773Telephone No.+81-6-6348-3773Fax No.+81-6-6348-3752Date PreparedApril 12,2001Name of Prepare (optional)Masahiro Sugino2 COMPOSITION / INFORMATION ON INGREDIENTSPreparation Chemical Nature UV curable inkComponentsChemical Name (Generic Name) Epoxy resin Acrylate monomer Uretane acrylate Filler Photo initiater Chemical formula CH2=CHCOOR SiO2CAS No.25068-38-6 2399-48-6 126481-96-7 112945-52-5 71868-10-5Concentration0% % % %Components Contributing to the HazardSubstances classified as hazardous are less than 1%.3 HAZARDS IDENTIFICATIONMost Important Hazards Flammable paste.Specific HazardsAcrylates may produce eczema on acrylate sensitive subject.May cause irritation to eyes, nose, throat, and skin.4 FIRST-AID MEASURESInhalation Remove the victim from the contamination immediately to fresh air.Skin Contact Wash with mild soap and water and flush with plenty of water.Eye Contact Flush with plenty of water for at least 15 minutes and consult a physician.IngestionRemove the ink from the mouth immediately and consult a physician.Extinguishing MediaCarbon Dioxide, Aqueous Foam, Dry Chemical. Specific HazardsDuring a fire, aerosols or gases may be generated through decomposition.Protection of FirefightersPositive pressure self-contained breathing apparatus and full protective clothing and gloves should be provided.Splash water onto cans and facilities which are not on fire to avoid fire spreading and heat evolved. After a fire is extinguished, neutralized the spilled material with decontaminant. Restrict entry of unauthorized personnel.Material Safety Data SheetChemical ProductMSDS No.Material Safety Data Sheet6 ACCIDENTAL RELEASE MEASURESImmediately remove all sources of ignition and flammable material.In case of fire, use powder or form as extinguishing media.Full protective equipment including respiratory protective apparatus should be worn.Restrict entry of unauthorized personnel.Stay in windward position at the time of disposal.The hazard area should be well-ventilated.Safely stop discharge.Personal PrecautionsAvoid direct contact with skin. Wear gloves and glasses. Respiratory for organic solvents is necessary.Methods for Cleaning upSweep-up thoroughly with a vacuum-cleaner or a broom.Recovery Small spills should be wiped with waste cloth.DisposalWaste material can be destroyed by fire.7 HANDLING AND STORAGE HANDLINGTechnical MeasuresThe operator should be trained in handling this product.Appropriate safety measures and protective equipment should be used for this operation.The use of fire is strictly prohibited in the work area.Goggles or glass is necessary.Rubber, silicone rubber, or polyethylene gloves are necessary.Respiratory for organic solvents is necessary.After handling, wash hands and face with mild soap and water.PrecautionsProvide adequate ventilation and the operator should be use protective equipment. Safe Handling AdviceAvoid to be exposed in direct daylight and high temperature.Avoid contamination with alkalinens and metallic ions. STORAGETechnical Measures Keep container properly sealed and store indoors in a well-ventilated area.The use of fire is strictly prohibited in the storage area. Storage Conditions The material should be stored under the dark and cool.Incompatible ProductsAvoid contamination with alkalinens and metallic ions.Avoid to be exposed in direct daylight and high temperature.Local exhaust ventilation should be provided.Readily accessible eye and hand wash stations should be provided.PERSONAL PROTECTIVE EQUIPMENT Respiratory Protection Respiratory for organic solvents is necessary. Hand Protection Rubber,silicone rubber,polyethylene gloves,or chemical resistant gloves are Eye Protection Safty goggles or glass is necessary.ENGINEERING MEASURESGeneralAfter handling, wash hands and face with mild soap and water.MSDS No.Material Safety Data Sheet9 PHYSICAL AND CHEMICAL PROPERTIESPhysical State PasteColorOdor Mild acrylic odorpH Not applicableBoiling PointFlash Point(give method) 105 (Seta Closed)Specific Gravity at 25 1.15g/cm3SolubilityStabilityHazardous Reactions Avoid to add amines or peroxides(may cause polymerization)Conditions to Avoid Avoid to be exposed in direct daylight and high temperature.Material to Avoid Avoid contamination with alkalinens and metallic ions.No information is available.Hazardous Decomposition11 TOXICOLOGICAL INFORMATIONAcute Toxicity Irritation occurs as above mentioned.12 ECOLOGICAL INFORMATIONMobility No information is available.Persistence/Degradability No information is available.Bioaccumulation No information is available.13 DISPOSAL CONSIDERATIONSWaste from Residues This product should be incinerated in an appropriate facility.This product should be treated by authorized agents professionally trained indisposing industrial waste.Contaminated Packaging Used container should be punctured and scrapped.14 TRANSPORT INFORMATIONInternational RegulationsUN Classification Number Not classifiedSpecific Precautions Follow all of the laws and regulations in your country.Be sure that the container should be tightly sealed,that no leakage is found and thatall the necessary indications are specified.Follow all of the laws and regulations in your country.Notice The information in this MSDS,to the best of our knowledge,is accurate and correct.However,TOYOBO makes no warranty and assumes no liability whatsoever inconnection with any use of this information.The MSDS is subject to revision as newinformation becomes available.。