迪菲莫特电子PC50CND系列产品说明书

1
Product Description
The PC50CND. is a family of general purpose diffuse-reflective sensors in a com-pact square 17 x 50 x 50 mm reinforced PC/ABS-housing.They are useful in applica-tions where basic sensors provide adequate sensing
performance. The long sens-ing range together with sensi-tivity adjustment gives a very flexible sensor. The DC types are with a transistor output and the configuration is fully programmable (NPN, PNP ,NO and NC).
•Range: 1 m
•Adjustable sensitivity •Modulated, infrared light •Supply voltage: 10 to 30 VDC •Output: 200 mA, NPN or PNP
•Make and break switching function selectable
•LED for output indication, signal stability and power ON •Protection: reverse polarity, short circuit, transients •Cable and plug version •
High EMC immunity
Photoelectrics
Diffuse-reflective, Transistor Output
Type PC50CND10BA
Type Selection
Housing Range Ordering no.
Ordering no.W x H x D S n NPN & PNP cable
NPN & PNP plug
Make & break switching Make & break switching 17 x 50 x 50 mm
1 m
PC 50 CND 10BA
PC 50 CND 10 BAM1
Specifications
2
Operation Diagram
tv = Power ON delay
Dimensions
PC50CND10BA
3
Delivery Contents
•Photoelectric switch: PC50 CND..•Installation instruction
•Mounting bracket APC50-1•Packaging:Cardboard box
Signal Stability
Accessories
•Screwdriver for adjustment:77-001•Connector type CON.1A..
For further information refer to “Accessories”
Excess Gain
PC50CND10BA
Wiring Diagrams
+
-
1 BN 4 BK
2 WH
3 BU
Detection Diagram
200,0 400,0 600,0 800,0 1000,0 1200,0
150,00100,0050,00
0,0-50,00-100,00-150,00
Y X
Sensor
R27
Kodac test card
Sensing range (mm)
E x c e s s g a i n
Sensing range (mm)
(m m )
Installation Hints
Relief of cable strain
Protection of the sensing face
Switch mounted on mobile carrier
To avoid interference from inductive voltage/current peaks, separate the prox. switch pow-er cables from any other power cables, e.g.motor, contactor or solenoid cables
Incorrect
Correct
The cable should not be pulled
A proximity switch should not serve as mechanical stop
Any repetitive flexing of the cable should be avoided。