Panasonic KX-T7665快速参考指南说明书

Quick Reference Guide
Model No. KX-T7665
Important Information
When using the KX-T7665, keep the following conditions in mind.
Digital Proprietary Telephone
Note:In this manual, the suffix of each model number is omitted.
© 2003 Panasonic Communications Co., Ltd. All Rights Reserved.
IMPORTANT NOTICE:
Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone, not dependent on local power, is available for use in an emergency.
•If there is any problem, unplug the extension line and connect a known working phone. If the known working phone operates properly, have the defective phone repaired by a specified Panasonic Factory Service Centre. If the known working phone does not operate properly, check the KX-TDA series Business Telephone Systems and the internal extension wiring.•Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors and televisions. These noise sources can interfere with the performance of the unit.
•This unit should be kept free of dust, moisture, high temperature (more than 40 ºC) and vibration, and should not be exposed to direct sunlight.
•Do not use benzine, thinner, or the like, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth.
•Do not use any handset other than a Panasonic handset.
•Do not disassemble this product. Dangerous electrical shock could result. The unit must only be disassembled and repaired by qualified service technicians.
•When a failure occurs which exposes any internal parts, disconnect the telephone line cord immediately and return this unit to service centre.
•Never attempt to insert wires, pins, etc, into the vents or other holes of this unit.
•This unit is designed to be installed under controlled conditions of ambient temperature and a relative humidity.
•Avoid installing the unit in damp or humid environments, such as bathrooms or swimming pools.
•999 or 112 can be dialled on the product after accessing the CO line for the purpose of making outgoing calls to the BT emergency (999) and (112) services.
•This unit is designed to aid the visually handicapped to locate dial keys and buttons.
•This unit is capable of being used in conjunction with hearing aids fitted with inductive coil pick-ups. The handset should be held as for normal
conversations. For operation the hearing aid should be set to its "T" position or as directed in the operating instructions for the hearing aid.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.
THE HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.
Off-hook Outside (CO) Line button Incoming Call Distribution Group button
On-hook
Feature number
Talk
(CO)
(ICD Group)
Direct Station Selection button
(DSS)
Confirmation Tone C. Tone
Ringback Tone
R.B. Tone
During a Conversation
Call Hold
(ICD Group)
To hold
To retrieve a call at the holding extension
To retrieve an outside call from another extension
(CO)
/
/
(CO)
C. Tone
HOLD
INTERCOM
Operation
To dial
To an extension
assigned as a One-touch Dialling button To dial
To store
To store
personal speed dial no. (2 digits)desired no. (max. 32 digits)
#
3
2
Redial Quick Dialling
One-touch Dialling Operator Call
Personal
Speed Dialling System
Speed Dialling Doorphone Call
Automatic Callback Busy
Making Calls quick dial no.
Calling extension no.
To an outside party
doorphone no. (2 digits)
To set
To cancel
4
6
6
While hearing a busy tone
To answer from an idle extension While hearing a callback ring
To answer from an idle outside line While hearing a callback ring
outside phone no.
system speed dial no. (3 digits)
To dial
personal speed dial no. (2 digits)
31outside
phone no.
(CO)
(CO)
desired no. (max. 32 digits)
Feature
Making Calls
C. Tone
C. Tone
C. Tone
C. Tone
R.B. Tone
REDIAL
PROGRAM
PROGRAM
AUTO DIAL STORE
AUTO DIAL STORE
AUTO DIAL STORE
9
/
Multiple Party Conversation
To leave a conference
To add other parties during a conversation
desired phone no.Call Park
To set
52
Specified Auto
parking zone no.
Talk to the
new party.Talk with multiple parties.
(2 digits)
Call Transfer
During a Conversation
outside phone no.
To an extension
To an outside party
extension no.
(CO)
Answering a Call Waiting
assigned as a CONFERENCE button assigned as a
CONFERENCE
button
assigned as a CONFERENCE
button
C. Tone
C. Tone
C. Tone C. Tone C. Tone Useful Features
Off-Hook Monitor
During a conversation using the handset
To set/cancel
Call Pickup
Sending a Call Waiting Tone 1While hearing a busy tone
Wait for an answer.
To retrieve
52
stored parking zone no.(2 digits)
C. Tone
C. Tone
TRANSFER
TRANSFER
Group
4
Directed extension no.41group no. (2 digits)
(DSS)
C. Tone
(CO)
/
To hold the current call then talk to the new party
HOLD
INTERCOM
*
* Disregard this step if both parties are extensions.
SP-PHONE
Useful Features
33
To page
To answer
To allow/deny a paged announcement
721 721
Deny
Allow
1
Announce.
Wait for
an answer.
43paging group no. (2 digits)
Paging
Message
Waiting
Caller
Called
extension To leave a message waiting indication
When the called extension is busy or does not answer
To call back
C. Tone
C. Tone C. Tone
C. Tone
C. Tone
For Log-in
For Log-out
1
736
736
extension no.
ICD Group Specified
All
Log-in/Log-out
C. Tone
Before Leaving Your Desk
Setting Absent Message
message no.
(1-9)
To set
To cancel
parameter
(if required)
750
750#
Call Forwarding
MESSAGE
MESSAGE
1
7
Busy
Cancel
No answer
Busy/
No answer
CO line
access no.
All calls
extension no.
outside
phone no.
Both Calls
Outside Calls
Intercom Calls
OR
C. Tone
1
2
2
3
4
5
#
Before Leaving Your Desk
To lock
C. Tone
771
extension PIN (max. 10 digits)
To unlock
770
Extension Lock
Setting the Telephone According to Your Needs
Set Cancel
C. Tone
710
Both Calls Outside Calls Intercom Calls
12
10
Extension Setting Clear
Do Not Disturb 790
C. Tone
To set
AM
PM
24 H
12 H
7601
01once daily
C. Tone
01
hour/minute (4 digits)
hour/minute (4 digits)
To cancel
To stop or answer the ring back
7600
C. Tone
/
Timed Reminder
Receiving Call Waiting
Tone
To set/cancel for outside calls
To set/cancel for intercom calls
No Call Whisper OHCA
C. Tone
7
3
1
13
7
3
2
Tone
No tone 01
C. Tone
C. Tone
INTERCOM
• For more details, refer to the Business Telephone System User Manual or consult your dealer.• You can change the flexible CO buttons to the feature buttons.• “Location of Controls” is shown on page 6.
Location of Controls
LCD (Liquid Crystal Display)
Microphone: Used for the hands-free conversation.
VOLUME Control Button: Used to adjust the volume.
HOLD: Used to place a call on hold.SP-PHONE (Speakerphone): Used for the hands-free operation.
Flexible Outside (CO) Line Buttons: Used to make or receive an outside call. Pressing this button seizes an idle outside line automatically. (Button assignment is required.)
Also used as feature buttons. (Button assignment is required.)
Message/Ring er Lamp: When you receive a call, the lamp flash es red. When someon e has left you a message, the lamp stays on red.
TRANSFER: Used to transfer a call to another party.
REDIAL: Used to redial the last dialled number.
MESSAGE: Used to leave a message waiting indication or call back the party who left the message waiting indication.FLASH/RECALL: Used to disconnect the current call and make another call without hanging up.
INTERCOM: Used to make or receive intercom calls.
AUTO ANS (Auto Answer)/MUTE: Used to receive an incoming call in hands-free mode or mute the microphone/handset during a conversation.
PROGRAM: Used to enter and exit the personal programming mode.
AUTO DIAL/STORE: Used for System/Personal Speed Dialling or storing programme changes.
15
14
PSQX2972ZA KK0503TT0
Setting
Ringer volume
While on-hook or receiving a call
Press UP or DOWN.
Ring Tone
01
PROGRAM
While on-hook
LCD Contrast
PROGRAM
AUTO DIAL
STORE
AUTO DIAL STORE
PROGRAM
OR 010
8
Press Twice .
AUTO DIAL STORE
PROGRAM
(CO)INTERCOM
* The ring tone pattern of patterns 09 to 30 is the same as pattern 01.
*
15
14
Settings on the Programming Mode
To exit
To enter the programme mode
Operation
Call Waiting Tone Type Selection Alternate Receiving-Ring/Voice
90
extension PIN
same PIN
Tone 1
Tone 2
1
/
1Ringing (Tone Call)Ring only 2
Directly To set an extension PIN To change a stored extension PIN to new one 2
1
stored extension PIN
same PIN
new PIN
3
2
Intercom 10
1
2No line
An idle outside line
A CO/ICD Group button CO button no.
9
CO
Station Programming Data Default Set
#
Direct Station
Se lec tion
One-touch Dialling FWD/DND - Both calls
1CO
extension
no.2CO
desired no.
4CO
1Account Conference 4CO
84CO
9/
+/
20
2
No line
The longest ringing line An assigned outside button
CO button no.
CO
/
+4CO
24CO
3FWD/DND - Outside calls FWD/DND
- Intercom calls
Incoming Call Distribution Group (ICD Group)
CO
ICD Group no.
3
5
CO
5
Log in/Log-out
Call Waiting for Outside calls No (No tone)Yes (Tone)
1/
No Call Tone 1/Whisper OHCA
3/
3031Preferred Line
Assignment-Outgoing
Preferred Line
Assignment-Incoming
Call Waiting Selection
#Loop-CO (L-CO)Single-CO (S-CO)CO
CO
0CO line no.(Voice Call)Extension PIN
[Personal Identification Number]
(PIN-max.10 digits)PROGRAM
PROGRAM
INTERCOM
3
1
00
Connection
Wall Mounting
1 Pull down the handset hook until it locks,
so the tab holds the handset.
2 Remove the attached stand.
3 Mount the unit on the wall.
To temporarily place the handset down during a conversation, hook it over the top edge of the phone as shown.
CAUTION
Ensure the cords are inserted in the groove to prevent damage to the connector.
Connect to a KX-TDA series
Business Telephone System . The telephone line cord (included)
< Back view>
TO MAIN UNIT /PABX The availability of D-XDP function depends on the software version of the connected Business Telephone System. Consult your dealer for more details about D-XDP .
•
( )This product is intended to be connected to Panasonic KX-TDA series Business Telephone Systems only.
We, Panasonic Communications Co., Ltd./Panasonic Communications Company (U.K.) Ltd., declare that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
If you want to get a copy of the original Declaration of Conformity of our products which relates to the R&TTE, please contact to our web address: http://doc.panasonic-tc.de
Connect to a digital proprietary telephone
for D-XDP ( ).
TO DIGITAL
2
1。