Cisco ASR 1000 Series Shared Port Adapter Support
ASR 1000 - Channel Webex
SIP10
ESP10
RP1 Rack Mounts and Cable Mgt not shown
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential
6
ASR 1000 Family
ASR 10xx Future
12-slot
2 2 3 H/W n/a 10.5” (6RU) 10-40+ Gbps 8-16+ Mpps Front to Back 1275
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
5
ASR1006 Close-up
+
>40
Patents
=
Cisco QuantumFlow Processor
World’s Most Advanced Piece of Networking Silicon
Performance Scale Availability Services
© 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential
T1, FT1, DS3, CHOCx
18x x 38x x x
28x
Large Branch
Cisco Confidential
© 2008 Cisco Systems, Inc. All rights reserved.
11
ASR 1000
Internet Transit / Gateway
ASR1000
Product BulletinCisco ASR 1000 Series Aggregation Services RoutersPB447657The Cisco® ASR 1000 Series Aggregation Services Routers are designed to optimize service provider edge and enterprise aggregation solutions. The innovative hardware and software design of these routers integrates powerful resiliency and intelligent services into a single router platform (Figure 1).Figure 1. Cisco ASR 1000 Series Aggregation Services RoutersHardwareThe system is composed of a chassis, a route processor (RP), embedded services processors (ESPs), and SPA interface processors (SIPs). For interfaces it supports common Cisco shared port adapters (SPAs) that are shipping with other Cisco high-end routing platforms. Because of the modular design of the hardware, you can order many combinations to fit various price and performance requirements.Four form-factor chassis are available: 2, 4, 6, and 13 rack units (RUs). All chassis come equipped with dual power supplies. Most hardware components are interchangeable among different chassis; the exceptions are the 2RU and 2RU-Fixed models, which have a fixed SIP and route processor in the chassis because of their compact form factor, and the SIP and route processor are not upgradable. Additionally, the 2RU-Fixed model has an integrated ESP with throughput of 2.5 Gbps. The modular route processors supported on the 4- and 6RU chassis ship with default 2-GB DRAM (ASR1000-RP1) or 8-GB DRAM (ASR1000-RP2), which you can upgrade to 4-GB DRAM (ASR1000-RP1) or 16-GB DRAM (ASR1000-RP2). The 2RU and 2RU-Fixed chasses do not support field-upgradable route-processor memory, but they do ship by default with 4-GB DRAM route-processor memory. The 2RU and 2RU-Fixed models also offer 4 built-in Gigabit Ethernet ports in the route processor by default. The 6- and 13RU chassis support a redundant physical configuration of dual route processors and dual ESPs. The SIPs can house 4 half-height or 2 double-height SPAs with no limitation of interface types. Table 1 outlines hardware component compatibility.Table 1. Hardware Support CompatibilityChassis PartNumber Route Processor ESP SIPASR1002-F ●Cisco ASR 1000 Series Route Processor1 (RP1) integrated in the chassis with 4-GB DRAM (memory is neither factory-nor field-upgradable)●Four built-in Gigabit Ethernet ports withSmall Form-Factor Pluggable (SFP)support●Integrated RP1 is not upgradable ●2.5-Gbps Cisco ASR 1000 SeriesEmbedded Services Processor (ESP)integrated in the chassis●Integrated ESP is not upgradable●10-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP10)integrated in the chassis andnot upgradableASR1002 ●Cisco ASR 1000 Series RP1 integratedin the chassis with 4-GB DRAM (memoryis neither factory- nor field-upgradable)●Four built-in Gigabit Ethernet ports withSFP support●Integrated RP1 is not upgradable ●5-, and 10-Gbps Cisco ASR 1000 SeriesESPs (ASR1000-ESP5, ASR1000-ESP10, and ASR1000-ESP10-N))●10-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP10)integrated in the chassis andnot upgradableASR1004 ●Support for modular route processor with2- or 4-GB DRAM (ASR1000-RP1) orwith 8- or 16-GB DRAM (ASR1000-RP2)●One route processor per chassis●Upgradable ●10-Gbps Cisco ASR 1000 Series ESP(ASR1000-ESP10)●10-Gbps Cisco ASR 1000 Series ESPnoncrypto (ASR1000-ESP10-N)●20-Gbps Cisco ASR 1000 Series ESP(ASR1000-ESP20)●Support for single ESP per chassis●Upgradable●10-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP10)●UpgradableASR1006 ●Support for modular route processor with2- or 4-GB DRAM (ASR1000-RP1) orwith 8- or 16-GB DRAM (ASR1000-RP2)●Support for single or dual routeprocessor(s) per chassis●In case of dual route-processor support:The same route processor is requiredper Cisco ASR 1006: Either dual CiscoASR 1000 RP1s or dual Cisco ASR1000 RP2s●Upgradable ●10-Gbps Cisco ASR 1000 Series ESPs●10-Gbps Cisco ASR 1000 Series ESPnoncrypto (ASR1000-ESP10-N)●20-Gbps Cisco ASR 1000 Series ESP(ASR1000-ESP20)●40-Gbps Cisco ASR 1000 Series ESP(ASR1000-ESP40)●Support for single or dual ESP(s) perchassis●For dual ESP processor support: Thesame ESP is required per Cisco ASR1006—dual ESP10’s, dual ESP20’s ordual ESP40’s●Upgradable●10-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP10)●40-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP40)●UpgradableASR1013 ●Support for modular route processor with8- or 16-GB DRAM (ASR1000-RP2) ●40-Gbps Cisco ASR1000 ESP(ASR1000-ESP40)●Support for single or dual ESP(s) perchassis●For dual ESP processor support: Thesame ESP is required per Cisco ASR.●Upgradable●10-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP10)●40-Gbps Cisco ASR 1000Series SIP (ASR1000-SIP40)●UpgradableTable 2 lists the available hardware components. For the list of the product numbers of the supported SPAs, including the Cisco WebEx™ node on the Cisco ASR 1000 Series, please check the Cisco ASR 1000 Series SPA Data Sheet.Table 2. Cisco ASR 1000 Series Hardware ComponentsProduct Number Product DescriptionCisco ASR 1000 Series ChassisASR1002-F Cisco ASR1002 System, Fixed ESP, Crypto, 4 built-in GE, 4GB DRAMASR1002 Cisco ASR1002 Chassis, 4 built-in GE, Dual P/S, 4GB DRAMASR1002= Cisco ASR1002 Chassis, 4 built-in GE, Dual P/S, 4GB DRAM, spareASR1004 Cisco ASR1004 Chassis, Dual P/SASR1004= Cisco ASR1004 Chassis, Dual P/S, spareASR1006 Cisco ASR1006 Chassis, Dual P/SProduct Number Product DescriptionASR1006= Cisco ASR1006 Chassis, Dual P/S, spareASR1013 Cisco ASR1013 Chassis, Redundant P/SASR1013= Cisco ASR1013 Chassis, Redundant P/S, spareCisco ASR 1000 Series Embedded Services ProcessorASR1000-ESP5 ASR1000 Embedded Services Processor, 5G, Crypto, ASR1002 onlyASR1000-ESP5= ASR1000 Embedded Services Processor, 5G, Crypto, ASR1002 only,spareASR1000-ESP10 Cisco ASR1000 Embedded Services Processor, 10G, CryptoASR1000-ESP10= Cisco ASR1000 Embedded Services Processor, 10G, Crypto, SpareASR1000-ESP10-N Cisco ASR1000 Embedded Services Processor, 10G, Non CryptoASR1000-ESP10-N= Cisco ASR1000 Embedded Services Processor, 10G, Non Crypto, SpareASR1000-ESP20 Cisco ASR1000 Embedded Services Processor, 20G, CryptoASR1000-ESP20= Cisco ASR1000 Embedded Services Processor, 20G, Crypto, SpareASR1000-ESP40 Cisco ASR1000 Embedded Services Processor, 40GASR1000-ESP40= Cisco ASR1000 Embedded Services Processor, 40G SpareCisco ASR 1000 Series Route ProcessorASR1000-RP1 Cisco ASR1000 Route Processor 1, 2GB DRAMASR1000-RP1= Cisco ASR1000 Route Processor 1, 2GB DRAM, spareASR1000-RP2 Cisco ASR1000 Route Processor 2, 8GB DRAMASR1000-RP2= Cisco ASR1000 Route Processor 2, 8GB DRAM, spareCisco ASR 1000 Series SPA Interface ProcessorASR1000-SIP10 Cisco ASR1000 SPA Interface Processor 10ASR1000-SIP10= Cisco ASR1000 SPA Interface Processor 10, spareASR1000-SIP40 Cisco ASR1000 SPA Interface Processor 40ASR1000-SIP40= Cisco ASR1000 SPA Interface Processor 40, SpareCisco ASR 1000 Series USB Memory OptionsMEMUSB-1024FT 1GB USB Flash Token for Cisco ASR 1000 SeriesMEMUSB-1024FT= 1GB USB Flash Token for Cisco ASR 1000 Series, spareSoftwareCisco ASR 1000 Series Routers introduce the Cisco IOS® XE Software as their software architecture. Based on Cisco IOS Software, the Cisco IOS XE Operating System is designed to provide modular packaging, feature velocity, and powerful resiliency. Because of the extreme flexibility and robust performance of ESPs based on Cisco QuantumFlow Processor technology, network security, deep packet inspection, firewall, and many other advanced features are implemented in the Cisco IOS XE Operating System without the need of a service blade. One of the most innovative features is support for dual Cisco IOS Software consolidated packages in a single route processor for software redundancy in the 2- and 4RU chassis systems. Information about compatibility of supported dual software consolidated packages is available in the release notes. Note that with the redundant hardware route processor and ESP configuration in the 6- and 13RU models, Cisco IOS Software redundancy in a single route processor in a redundant 6RU system is not supported.A Cisco IOS XE consolidated package is composed of different software subpackages that you can download from as one consolidated package. You can upgrade the whole package or each of the subpackages individually. Information about the compatibility of various subpackages is outlined in each release note.Following are the seven subpackages:●Route processor◦RPBase: Route-processor operating system◦RPControl: Control-plane processes that interface between Cisco IOS Software and the rest of the platform ◦RPIOS◦RPAccess: Software required for router access; two versions are available: One that contains open Secure Shell (SSH) Protocol and Secure Sockets Layer (SSL) and one without (RPAccess-K9 and RPAccess,respectively)●SIPBase: SIP operating system + Control processes●SIPSPA: SPA drivers and field-programmable device (FPD) (SPA FPGA image)●ESP◦ESPBase: ESP operating system + Control processes + Cisco Packet Processor client, driver, and ucode Table 3 lists the software subpackages that each consolidated package consists of, and Table 4 gives ordering information for the software consolidated package spares. Table 5 lists the Cisco WebEx node SPA software. Table 6 lists the Cisco IOS XE Software consolidated package spares.Table 3. Software Subpackages for Each Cisco IOS XE Software Consolidated PackageConsolidated Package SubpackagesCisco ASR 1000 Series RP1 OR RP2IP Base without CryptoConsists of RPBase, RPControl, RPAccess, RPIOS-ipbase, ESPBase, SIPSPA, and SIPBaseCisco ASR 1000 Series RP1 OR RP2IP BaseConsists of RPBase, RPControl, RPAccess-K9, RPIOS- ipbasek9, ESPBase, SIPSPA, and SIPBaseCisco ASR 1000 Series RP1 OR RP2 Advanced IP Services K9 Consists of RPBase, RPControl, RPAccess-K9, RPIOS-advipservicesk9, ESPBase, SIPSPA, and SIPBaseCisco ASR 1000 Series RP1 OR RP2Advanced IP Services without CryptoConsists of RPBase, RPControl, RPAccess, RPIOS-advipservices, ESPBase, SIPSPA, and SIPBaseCisco ASR 1000 Series RP1 OR RP2 Advanced Enterprise Services K9 Consists of RPBase, RPControl, RPAccess-K9, RPIOS-adventservicesk9, ESPBase, SIPSPA, and SIPBaseCisco ASR 1000 Series RP1 OR RP2 Advanced Enterprise Services non crypto Consists of RPBase, RPControl, RPAccess-nonK9, RPIOS-adventservices, ESPBase, SIPSPA, and SIPBaseTable 4. Cisco IOS XE Software Consolidated PackageProduct Number Product DescriptionCisco ASR 1000 Series Consolidated PackagesSASR1R1-IPB Cisco ASR 1000 Series RP1 IP Base without CryptoSASR1R1-IPBK9 Cisco ASR 1000 Series RP1 IP BaseSASR1R1-AISK9 Cisco ASR 1000 Series RP1 Advanced IP ServicesSASR1R1-AIS Cisco ASR 1000 Series RP1 Advanced IP Services without Crypto SASR1R1-AESK9 Cisco ASR 1000 Series RP1 Advanced Enterprise ServicesSASR1R1-AES Cisco ASR 1000 Series RP1 Advanced Enterprise Services Non-Crypto SASR1R2-IPB Cisco ASR 1000 Series RP2 IP Base without CryptoSASR1R2-IPBK9 Cisco ASR 1000 Series RP2 IP BaseSASR1R2-AISK9 Cisco ASR 1000 Series RP2 Advanced IP ServicesSASR1R2-AIS Cisco ASR 1000 Series RP2 Advanced IP Services without Crypto SASR1R2-AESK9 Cisco ASR 1000 Series RP2 Advanced Enterprise ServicesSASR1R2-AES Cisco ASR 1000 Series RP2 Advanced Enterprise Services Non-Crypto Table 5. Cisco WebEx Node SPA SoftwareProduct Number Product DescriptionSASR1R1-WMAK9 Cisco ASR 1000 Series RP1 WebEx nodeSASR1R2-WMAK9 Cisco ASR 1000 Series RP2 WebEx nodeTable 6. Cisco IOS XE Software Consolidated Package SparesProduct Number Product DescriptionASR1000-SW-SPARECD Cisco ASR 1000 Series Software Spare CDCDASR1000R1-IPB= Cisco ASR 1000 RP1 IP Base without Crypto, spareCDASR1000R1-IPBK9= Cisco ASR 1000 RP1 IP Base, spareCDASR1000R1-AISK9= Cisco ASR 1000 RP1 Advanced IP Services with Crypto, spareCDASR1000R1-AIS= Cisco ASR 1000 RP1 Advanced IP Services without Crypto, spareCDASR1000R1-AESK9= Cisco ASR 1000 RP1 Advanced Enterprise Services with Crypto, spareCDASR1000R1-AES= Cisco ASR 1000 RP1 Advanced Enterprise Services without Crypto, spareCDASR1000R2-IPB= Cisco ASR 1000 RP2 IP Base without crypto, spareCDASR1000R2-IPBK9= Cisco ASR 1000 RP2 IP Base, spareCDASR1000R2-AISK9= Cisco ASR 1000 RP2 Advanced IP Services with Crypto, spareCDASR1000R2-AIS= Cisco ASR 1000 RP2 Advanced IP Services without Crypto, spareCDASR1000R2-AESK9= Cisco ASR 1000 RP2 Advanced Enterprise Services with Crypto, spareCDASR1000R2-AES= Cisco ASR 1000 RP2 Advanced Enterprise Services without Crypto, spareSoftware LicenseIf you are planning to deploy advanced features, you should purchase a license along with a consolidated package. Currently, the following features are licensed separately: IP Security (IPsec) encryption, firewall, Flexible Packet Inspection (including Network Based Application Recognition [NBAR] and Flexible Packet Matching), Broadband Aggregation, and Cisco Unified Border Element (SP Edition) (also known as session border control [SBC]).Table 7 gives ordering information for Cisco ASR 1000 Series software licenses.Table 7. Ordering Information for Cisco ASR 1000 Series Software LicensesProduct Number Product DescriptionCisco ASR 1000 Licenses-SecurityFLASR1-IPSEC-RTU Encryption Right-To-Use Feature Lic for ASR1000 SeriesFLASR1-FW-RTU Firewall Right-To-Use Feature Lic for ASR1000 SeriesFLASR1-FWNAT-RED Firewall/NAT Stateful Inter-Chassis Redundancy LicenseFLASR1-FPI-RTU Flex. Pack. Insp. Right-To-Use Feat Lic for ASR1000 SeriesFLASR1-IOSRED-RTU SW Redundancy Right-To-Use Feat Lic for ASR1000 SeriesCisco ASR 1000 Licenses-BroadbandFLASR1-BB-RTU Broadband Right-To-Use Feature Lic for ASR1000 SeriesFLASR1-BB-4K Broadband 4K Sessions Feature Lic for ASR1000 SeriesFLASR1-BB-16K Broadband 16K Sessions Feature Licfor ASR1000 SeriesFLASR1-BB-32K Broadband 32K Sessions Feature Lic for ASR1000 SeriesCisco ASR 1000 Licenses-Cisco Unified Border Element (SP Edition)FLASR1-CUBES-250P CUBE(SP) 250 Calls Perpetual Lic for ASR 1000 SeriesFLASR1-CUBES-2KP CUBE(SP) 2K Calls Perpetual Lic for ASR 1000 SeriesFLASR1-CUBES-4KP CUBE(SP) 4K Calls Perpetual Lic for ASR 1000 SeriesFLASR1-CUBES-16KP CUBE(SP) 16KCalls Perpetual Lic for ASR 1000 SeriesFLASR1-CUBES-32KP CUBE(SP) 32K Calls Perpetual Lic for ASR 1000 SeriesFLASR1-CUBES-TPEX CUBE(SP) Perpetual Lic for ASR 1000 Series in B2BTP ExchangeFor detailed and up-to-date information regarding the Cisco ASR 1000 Series software release strategy, software order guide, and software license plan, please refer to: /go/asr1000.Upgrade PathsCisco ASR 1000 Series Routers are included in the standard Cisco Technology Migration Program (TMP).Refer to /go/TMP and contact your local Cisco account representative for program details.Ordering InformationTo place an order, visit the Cisco Ordering Home Page at /en/US/ordering/index.shtml and refer to Tables 2 through 7.To download software, visit the Cisco Software Center at /public/sw-center/index.shtml; click “Router Software” and go to Cisco ASR 1000 Series Aggregation Services Routers.Cisco Services for the Enterprise WAN EdgeCisco and our partners help make your enterprise WAN edge deployment a success with a broad portfolio of services based on proven methodologies. We can help you establish a secure, resilient WAN architecture and successfully integrate Cisco Unified Communications, Cisco TelePresence™, security, and mobility technologies with bandwidth to support video, collaboration, branch-office solutions, and growth in alignment with your business goals. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance problems, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, visit/go/services.For More InformationFor more information about the Cisco ASR 1000 Series, visit /go/asr1000 or contact your local Cisco account representative.。
部署在ISR、ASR和Catalyst网络设备的诊断签名
部署在ISR、ASR和Catalyst网络设备的诊断签名目录简介先决条件要求使用的组件背景信息部署配置下载安装验证触发事件验证操作简介本文描述如何部署一个诊断签名(DS)为了自动地收集要求排除故障问题用Cisco集成服务路由器的诊断数据(ISR)， Cisco聚合服务路由器(ASR)和Cisco Catalyst 6500系列交换机和7600系列路由器。
先决条件要求本文档没有任何特定的要求。
使用的组件使用在本文中的显示命令从运行Cisco IOS版本15.4(2)T3的Cisco ISR 3945系列路由器捕获。
DS支持有在此表里列出的Cisco IOS版本：平台软件版本ISR 1900年， 2900， 3900系列路由器Cisco IOS 15.4(2)T和以后ISR 4300， 4400系列路由器Cisco IOS 15.5(2)S， IOS XE 3.15及以后ASR 1000系列路由器Cisco IOS 15.5(2)S， IOS XE 3.15及以后思科Cloud服务路由器1000V系列Cisco IOS 15.5(2)S， IOS XE 3.15及以后7600系列路由器Cisco IOS 15.3(3)S和以后Catalyst 6500系列交换机Cisco IOS 15.1(2)SY3和以后本文档中的信息都是基于特定实验室环境中的设备编写的。
本文档中使用的所有设备最初均采用原始（默认）配置。
如果您使用的是真实网络，请确保您已经了解所有命令的潜在影响。
背景信息DS是包含关于问题触发事件和操作的信息被采取为了修正或排除故障的XML文件。
他们由Cisco技术支持中心(TAC)创建，并且可以通过聪明的Call Home部署，或者您能手工装载在设备上的文件。
您能使用诊断签名查找工具(DSLT)为了查找问题的给的类型的权利DS。
在本文中，您将学习如何查找，并且部署DS为了排除故障PVDM-3 DSP失败。
思科
龙源期刊网
思科
作者：
来源：《通信产业报》2008年第11期
日前，思科宣布推出目前市场上最强大的紧凑型汇聚路由器——CiscoASR1000系列应用融合路由器。
CiscoASR1000可增强电信运营商和企业汇聚与边缘网络的性能，使其能同时集成越来越多的包括数据、语音、视频在内的资源密集型企业应用和面向消费者的服务定制，它不仅提供了多业务集成环境下业界领先的性能、服务水平和可靠性，进而实现了思科创建应用融合的网络平台的创新理念；而且还赋予了自身“绿色”的特性，能帮助用户有效减少能源消耗。
(伊佳)。
思科Cisco ASR 1000 系列聚合服务路由器 产品手册
产品手册Cisco ASR 1000 系列聚合服务路由器思科正在凭借Cisco®ASR 1000 系列聚合服务路由器重塑边缘路由技术。
该系列路由器是中端路由器产品组合，打造出全新的性价比产品等级，令服务提供商和企业均从中受益：●对于服务提供商，Cisco ASR 1000 系列路由器帮助其更灵活、高效和经济地为消费者和企业提供综合服务。
●对于企业，Cisco ASR 1000 系列路由器提供高可靠性和高性能的广域网边缘解决方案，将信息、通信、协作和商务融合在一起。
Cisco ASR 1000 系列路由器：●通过优化的智能服务提供出色的性能和高度可用性，从而提升服务。
●在企业高级路由、服务提供商边缘和宽带汇聚领域设立了全新的性价比产品基准。
●促进安全广域网聚合、托管客户端 (CPE) 服务和服务提供商边缘服务等领域中网络架构的重大创新。
●通过在相同的架构或运营环境下实现管理或托管服务来降低运营费用 (OpEx) 和资本支出 (CapEx)产品概述Cisco ASR 1000 系列分为以下不同版本（图 1）：Cisco ASR 1001 路由器、Cisco ASR 1002 固定式路由器、Cisco ASR 1002 路由器、Cisco ASR 1002 路由器、Cisco ASR 1004 路由器和 Cisco ASR 1006 路由器所有型号全部采用功能强大的创新 Cisco QuantumFlow 处理器，该处理器在网络处理器性能和恢复能力方面实现了巨大飞跃。
图 1. Cisco ASR 1000 系列聚合服务路由器与前几代的思科中端路由解决方案相比，Cisco ASR 1000 系列将服务运行性能提高了10 倍以上，从而显著提升了价值此外，该系列路由器具有硬件和软件冗余功能，并采用行业领先的低间断设计。
Cisco ASR 1000 系列提供多种嵌入在Cisco QuantumFlow 处理器中的服务，性能从2.5 Gbps 直至100 Gbps Cisco QuantumFlow 处理器支持的服务包括安全服务（例如，加密和防火墙）、服务质量(QoS)、网络应用识别(NBAR)、Cisco IOS®Flexible Packet Matching (FPM)、宽带聚合和思科统一边界要素(Cisco Unified Border Element)（SP 版）（之前称为会话边界控制或 SBC）等等。
Cisco ASR 1000系列嵌入式服务处理器数据表说明书
Data Sheet Cisco ASR 1000 Series Embedded Services ProcessorsProduct OverviewThe Cisco® ASR 1000 Series Embedded Services Processors (ESPs) handle all the network data-planetraffic-processing tasks of Cisco ASR 1000 Series Aggregation Services Routers. These ESPs allow the activation of concurrent enhanced network services, such as cryptography, firewall, Network Address Translation (NAT), quality of service (QoS), NetFlow, and many others while maintaining line speeds. Figure 1 shows the Cisco ASR 1000 Series ESP 100 and ESP 200.Cisco ASR 1000 Series Routers are placed at the WAN edge of your enterprise data center or large office, as well as in service provider points of presence (POPs). The routers rely on the power of the ESPs to aggregate multiple traffic flows and network services, including encryption and traffic management, and forward them across WAN connections at line speeds. With router options that run from 2.5 to 200 Gbps, the Cisco ASR Family contains many models and licensing options to meet the speed and budget requirements of different types of organizations and various-sized locations.The Cisco ASR 1000 ESP components of these routers accelerate service delivery using parallel processing. The ESPs are based on the Cisco Flow Processor (FP) for next-generation forwarding and queuing in silicon. They operate at 20-, 40-, 100-, and 200-Gbps data-plane forwarding throughput rates. Together, the Cisco ASR 1001-X, ASR 1001-HX, ASR 1002-HX, and ASR 1002-X Routers and 100- and 200-Gbps ESPs introduce the second generation of the Cisco FP hardware and software architecture. With FP-based ESPs at their core, ASR 1000 Routers accomplish the following:●Handle all baseline packet routing operations, including MAC address classification, Layer 2 and Layer 3forwarding, QoS classification, and NetFlow packet accounting●Perform advanced services such as IP Security (IPsec) encryption, Network Address Translation (NAT),firewall, AppNav, Cisco Application Visibility and Control (AVC), Performance Routing (PfR), and Locator ID Separation Protocol (LISP); they offer diverse feature Layer 2 connectivity options such as Ethernet over MPLS (EoMPLS), Virtual Private LAN Services (VPLS), Overlay Transport Virtualization (OTV), and Virtual Extensible LAN Services (VXLAN)Platform OverviewThe following embedded services processors are supported on the Cisco ASR 1000 Series Routers:●Cisco ASR 1000 Series 20-Gbps Embedded Services Processor●Cisco ASR 1000 Series 40-Gbps Embedded Services Processor●Cisco ASR 1000 Series 100-Gbps Embedded Services Processor●Cisco ASR 1000 Series 200-Gbps Embedded Services ProcessorFigure 1. Cisco ASR 1000 Series ESP 100 and ESP 200Features and BenefitsThe main engine of the ESP is the Cisco FP, the industry’s first programmable and application-aware network processor. The Cisco FP forms the overall hardware and software architecture of the ESP. It consolidates up to 256 customized packet-processor cores (900 MHz to 1.5 GHz) into a single processor. The parallel processing capability eliminates the need for additional service blades inside the router, because all processing is performed on the FP. As a result, the ESPs enable the ASR 1000s to support the following functions and features with high performance:●Forwarding, traffic management, and services●Large-scale parallel processing with centralized shared memory to achieve low-latency packet processing●High-performance deep-packet inspection (DPI) with full visibility into the entire Layer 2 frame, includingpayload●Rapid feature development with ANSI-C software development framework●Up to 200-Gbps system throughput and up to 130 millions of packets per second (mpps) to address WANaggregation needs●Hardware-assisted cryptographic performance to yield up to 78 Gbps of throughput to enable secure WANaccess and compliance●Line-speed zone-based firewall that provides up to 200 Gbps of throughput and 6-mpps firewall sessions●DPI, Cisco IOS® Software Zone-Based Firewall distributed denial of service (DDoS) detection andprevention, and control-plane protection●Cisco Session Border Control (SBC) for terminating and interconnecting media terminations with fullaccounting and flow control●Cisco Multicast Visual Quality Experience (VQE) and video Call Admission Control (CAC) for enhanceduser experiences●Hardware-accelerated traffic classification and traffic shaping with support for up to 464,000 queues●Flexible traffic prioritization and efficient WAN bandwidth use with minimum, maximum, and excessbandwidth allocation with priority propagationUse CasesThe ESPs address the following applications and use cases:●Service provider broadband: The Cisco ASR 1000 Series Router serves as a broadband aggregation routerthat terminates up to 64,000 subscriber sessions. It supports features such as SBC for voice over IP (VoIP) and video services (including Cisco TelePresence® communications systems) and hardware-assisted per-user firewall for security.●Service provider-managed customer premises equipment (CPE): The Cisco ASR 1000 Router serves as aWAN aggregation router with high-density Gigabit Ethernet or WAN link aggregation and 10 GigabitEthernet uplink capabilities. Key benefits are Layer 2 and Layer 3 VPN functions and line-rate IP Multicast support for triple-play (data, voice, and video) deployments.●Multimedia provider edge (PE): The Cisco ASR 1000 Series Router interfaces with enterprise and serviceprovider-provisioned voice and multimedia services directly at the edge. You do not need an overlaynetwork, network appliances, or service blades, lowering operating expenses (OpEx) and offering flexible deployment models. This router supports protected signaling for both voice and video services andfacilitates 32,000 voice calls concurrent with up to 200 Gbps of data traffic with accounting, firewall, andcall-quality features enabled.●Enterprise WAN aggregation: At the WAN aggregation headend, the Cisco ASR 1000 Router facilitates abranch-office architecture that offers excellent investment protection with services and scale. Solutionbenefits consist of a multigigabit encryption rate (up to 78-Gbps IPsec cryptography throughput) andoptimization of the WAN to route around brownouts in the service provider network to guaranteemission-critical applications.●Enterprise Internet gateway: As an Internet gateway, the ASR 1000 delivers multigigabit Cisco IOS Firewallcapability without the need for service blades. All firewall processing occurs in silicon 2.5-, 5-, 10-, 20-, 40-, 100-, or 200-Gbps speeds. In addition, the router provides high-speed logging through Sampled NetFlow Version 9 and ongoing forwarding with baseline and firewall features enabled.●Enterprise Intelligent WAN (IWAN): The scalable Cisco ASR 1000 Router smoothly enables the intelligentWAN architecture that allows enterprises to reduce expensive WAN costs by adopting business-classInternet as a transport while maintaining privacy, confidentiality with crypto, and regulatory compliance witha zone-based firewall.●Enterprise Data Center Interconnect (DCI): The scalable Cisco ASR 1000 Router securely enables theinterconnection of data centers to the cloud to consume services and migrate workloads to provide disaster recovery and normal data center management operations.Platform Support and CompatibilityTo benefit from feature-rich services of Cisco ASR 1000 Routers, Cisco IOS XE Software Release 2.4 or later is required. For the newly added Cisco ASR 1001-X Router, Cisco IOS XE Software Release 3.12 or later is required. For ESP data-plane throughput compatibilities by ASR platform, refer to Tables 1 through 8.Table 1. Cisco ASR 1000 Series Integrated ESP in Cisco ASR 1002-HX Chassis Compatible HardwareTable 2. Cisco ASR 1000 Series Integrated ESP in the ASR 1001-HX Chassis Compatible HardwareTable 3. Cisco ASR 1000 Series Integrated ESP in Cisco ASR 1001-X Chassis Compatible HardwareTable 4. Cisco ASR 1000 Series Integrated ESP in Cisco ASR 1002-X Chassis Compatible Hardware* Supports 1 + 1 redundancy when configured with two 10-Gbps Cisco ASR 1000 ESP modules.Table 5. Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20) Compatible Hardware* Supports 1 + 1 redundancy when configured with two 20-Gbps Cisco ASR 1000 ESP modules.Table 6. Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) Compatible Hardware* Supports 1 + 1 redundancy when configured with two 40-Gbps Cisco ASR 1000 ESP modules.Table 7. Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) Compatible Hardware* Supports 1 + 1 redundancy when configured with two 100-Gbps Cisco ASR 1000 ESP modules. Table 8. Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) Compatible Hardware* Supports 1 + 1 redundancy when configured with two 200-Gbps Cisco ASR 1000 ESP modules.Product SpecificationsTables 9 through 13 list specifications of all ESPs in the ASR 1000 Series product family. Table 9. Specifications of Integrated ESP Module in Cisco ASR 1002-HX ChassisTable 10. Specifications of Integrated ESP Module in the Cisco ASR 1001-HX ChassisTable 11. Specifications of Integrated ESP Module in Cisco ASR 1001-X ChassisTable 12. Specifications of Cisco ASR 1000 Series 5-, 10-, 10-N-, 20-, 40-, 100-, and 200-Gbps ESP ModulesTable 13. Specifications of Integrated ESP Module in Cisco ASR 1002-X ChassisSystem RequirementsTable 14 details the system requirements of the ASR 1000 ESPs.Table 14. System RequirementsFor 20-Gbps Cisco ASR 1000 ESP: Cisco ASR 1004 Router chassis with one instance of Cisco ASR 1000 SeriesRoute Processor and one instance of Cisco ASR 1000 Series SPA Interface ProcessororCisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface ProcessorFor 40-Gbps Cisco ASR 1000 ESP: Cisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface ProcessororCisco ASR 1004 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface ProcessororCisco ASR 1013 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface ProcessororCisco ASR 1006-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line CardorCisco ASR 1009-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line CardFor 100-Gbps Cisco ASR 1000 ESP: Cisco ASR 1006 Router chassis with at least one instance of Cisco ASR 1000Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface ProcessororCisco ASR 1013 Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line CardorCisco ASR 1006-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor or CiscoASR 1000 Ethernet Line CardorCisco ASR 1009-X Router chassis with at least one instance of Cisco ASR 1000 Series Route ProcessorFor 200-Gbps Cisco ASR 1000 ESP: Cisco ASR 1013 Router chassis with at least one instance of Cisco ASR 1000Series Route Processor and one instance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000Ethernet Line CardorCisco ASR 1009-X Router chassis with at least one instance of Cisco ASR 1000 Series Route Processor and oneinstance of Cisco ASR 1000 Series SPA Interface Processor or Cisco ASR 1000 Ethernet Line CardSoftware Cisco IOS XE Software Release 2.1 (for 5- and 10-Gbps ESPs only) or later(10-N- and 20-Gbps ESPs: Release 2.2 or later)Cisco IOS XE Software Release 2.4 (for 2.5-Gbps ESP integrated in the Cisco ASR 1002-F chassis)Cisco IOS XE Software Release 3.1.0S (for 40-Gbps ESP) or laterCisco IOS XE Software Release 3.2.0S (for 40-Gbps ESP support on Cisco ASR 1004) or laterCisco IOS XE Software Release 3.2.0S (for integrated ESP in Cisco ASR 1001 chassis) or laterCisco IOS XE Software Release 3.7.0S (for integrated ESP in Cisco ASR 1002-X chassis) or laterCisco IOS XE Software Release 3.7.1S or later for 100-Gbps ESPCisco IOS XE Software Release 3.10.0S or later for 200-Gbps ESPCisco IOS XE Software Release 16.2.1S or later for ASR 1002-HX ESPCisco IOS XE Software Release 16.3.1S or later for ASR 1001-HX ESPPerformance and ScalingAll performance numbers are based on the RFC-2544 test methodology.Table 15 lists the performance and scaling features offered by the ASR 1002-HX chassis with an integrated ESP module.Table 15. Cisco ASR 1002-HX with Integrated ESP ModuleTable 16 lists the performance and scaling features offered by the ASR 1001-HX chassis with an integrated ESP module.Table 16. Cisco ASR 1001-HX with Integrated ESP ModuleTable 17 lists the performance and scaling features offered by the Cisco ASR 1001-X chassis with an integrated ESP module.Table 17. Cisco ASR 1001-X with Integrated ESP Module and 8-GB MemoryTable 18 lists the performance and scaling features offered by the Cisco ASR 1002-X chassis with an integrated ESP module.Table 18. Cisco ASR 1002-X with Integrated 36-Gbps ESP Module and 8-GB MemoryTable 19 lists the performance and scaling features offered by the Cisco ASR 1000 Series 20-Gbps ESP module. Table 19. Cisco ASR 1000 Series 20-Gbps ESP Performance and ScalingTable 20 lists the performance and scaling features offered by the Cisco ASR 1000 Series 40-Gbps ESP module. Table 20. Cisco ASR 1000 Series 40-Gbps ESP Performance and ScalingTable 21 lists the performance and scaling features offered by the Cisco ASR 1000 Series 100-Gbps ESP module. Table 21. Cisco ASR 1000 Series 100-Gbps ESP Performance and ScalingTable 22 lists the performance and scaling features offered by the Cisco ASR 1000 Series 200-Gbps ESP module. Table 22. Cisco ASR 1000 Series 200-Gbps ESP Performance and ScalingPlease refer to the Cisco ASR 1000 Series Routing Processor data sheet for a list of software features and benefits applicable to broadband, service provider edge, and enterprise deployments.Ordering InformationTable 23 gives ordering information for the Cisco ASR 1000 Series ESPs.Table 23. Ordering InformationFor the ordering guide, download the complete ASR 1000 Series Ordering Guide.Cisco ServicesCisco offers a wide range of services programs to accelerate customer success. These innovative servicesprograms are delivered through a unique combination of people, processes, tools, and partners, resulting in highlevels of customer satisfaction. Cisco Services can help you protect your network investment, optimize networkoperations, and prepare your network for new applications to extend network intelligence and the power of yourbusiness. For more information about Cisco Services, refer to Cisco Technical Support Services or CiscoAdvanced Services.Warranty InformationFind warranty information by searching the Cisco warranty finder at/WarrantyFinder.aspx.Cisco CapitalFinancing to Help You Achieve Your ObjectivesCisco Capital can help you acquire the technology you need to achieve your objectives and stay competitive. Wecan help you reduce CapEx. Accelerate your growth. Optimize your investment dollars and ROI. Cisco Capital®financing gives you flexibility in acquiring hardware, software, services, and complementary third-party equipment.And there’s just one predictable payment. Cisco Capital is available in more than 100 countries. Learn more.For More InformationFor more information about the Cisco ASR 1000 Series or the ESPs, visit /go/asr1000 orcontact your local Cisco account representative.Printed in USA C78-731640-14 09/16。
Cisco 1100 系列集成服务路由器设备说明说明书
Overview of Cisco 1100Series Integrated Services RoutersCisco 1100Series Integrated Services Routers (ISRs)with Cisco IOS XE Software are high-performance devices that are easy to deploy and manage.The routers combine Internet access,comprehensive security,and wireless services (LTE Advanced 3.0,Wireless WAN and Wireless LAN).•About Cisco 1100Series Integrated Service Routers,on page 1•Periodic Inspection and Cleaning,on page 12About Cisco 1100Series Integrated Service RoutersThe Cisco 1100series Integrated Services Routers are the next generation,IOS XE based,multi core,branch routers.They are available in both fixed and modular form factors.The Cisco 1100series is best suited for small and midsize businesses,enterprise branches and as customer premises equipment in managed services environments.Table 1:Base models of the Cisco 1100series ISRC1101-4P C1101-4PLTEPWx C111x-4P C111x-8P Feature4448Front panel switch ports 1RJ-451RJ-452(1Combo RJ-45/SFP +1RJ-45)2(1Combo RJ-45/SFP +1RJ-45)WAN portsMicro USB Micro USB Serial RJ-45,Micro USB Serial RJ-45,Micro USB Console port NoneNone2POE/1POE+4PoE/2PoE+(Optional)POE None802.11ac WA VE 2(C1101-4PLTEPWx)802.11ac WA VE 2802.11ac WA VE 2(Optional)WLANC1101-4P C1101-4PLTEPWx C111x-4P C111x-8P Feature None4G pluggable LTE (CAT 4)and pluggable LTEAdvanced (CAT 6)with carrier aggregation 4G LTE-Advanced (CAT6)with carrier aggregation 4G LTE-Advanced (CAT6)with carrier aggregation LTE (optional)NoneNoneVDSL2and ADSL2/2+G.FAST,VDSL2and ADSL2/2+DSL(optional)Multiple variations of the models are available based on LTE/WLAN/DSL/Ethernet options on the routers.Note For more information on the features and specifications of Cisco 1100Series Integrated Services Routers (ISRs),refer to the Cisco 1000Series Integrated Services Routers Solution Overview document and Cisco 1000Series Integrated Services Routers datasheet.Chassis ViewsThis section contains front and back panel views of the Cisco 1100Series ISR-showing locations of the power and signal interfaces,interface slots,status indicators,and chassis identification labels.Figure 1:Cisco 111x Series -BezelViewVPN 2Status 1GPS4WiFi3LTE Data/SIM6LTE Signal Intensity 5Illuminated Cisco Logo7Overview of Cisco 1100Series Integrated Services RoutersChassis ViewsFigure 2:Cisco 111x-8P -I/OViewEthernet Switch 2LTE Antennas –Main and Diversity 1CLEI Label 4GPS Connection 3Grounding 6Serial Number 5Power Switch 8Reset Button7GE 0/0/1104-pin Power Connector 9GE 0/0/0-SFP 12GE 0/0/0-RJ4511Lower slot0Upper slot114USB3.013RJ45/Micro USB Console16LTE Provisioning Port 15Kensington Lock Slot18DSL17Product Identification Number (PID)19For more information on the Reset Button,refer to the Reset Overview section in the ISR 1000Series Integrated Services Routers.NoteOverview of Cisco 1100Series Integrated Services RoutersChassis ViewsFigure 3:Cisco 1101-4P ISR -FrontViewNon-illuminated Cisco Logo1Figure 4:Cisco 1101-4P ISR -I/OViewGrounding2Kensington Lock Slot 14-pin Power Connector 4Power Switch 3LAN:0-46Reset Button 5Micro USB Console8GE WAN 7USB3.09Figure 5:Cisco 1101-4PLTEP-BezelViewNon-illuminated Cisco logo1Overview of Cisco 1100Series Integrated Services RoutersChassis ViewsFigure 6:Cisco 1101-4PLTEP -I/OView4-pin Power Connector 2Power Switch 1LAN:0-44Reset Button 3Micro-USB console Port 6GE WAN 5Pluggable8USB 3.07Kensington Lock Slot10Grounding9LED IndicatorsThe following figures and table summarizes the LED indicators that are located in the bezel or chassis of the C111x series.Figure 7:LED Indicators -BezelSideVPN 2Status 1GPS4WLAN3Overview of Cisco 1100Series Integrated Services RoutersLED IndicatorsLTE DATA/SIM6LTE RSSI/Mode 5Cisco Logo7Figure 8:LED Indicators -I/OSidePoE LED2GE WAN Ports:0-7(0,2,4,6at the top and 1,3,5,7at the bottom)1GE0LED4GE1LED 3RJ-45Console LED 6USB LED 5Micro USB Console LED 8USB Console 7DSL10CD LED 9DATA LED11The following table summarizes the LED indicators that are located in the bezel or chassis of the C111x series.Table 2:LED Indicators for C111xControl SourceDescription LED Color Port Bezel side Illuminated Cisco logo.Indicates router power is good.BlueCisco LogoOverview of Cisco 1100Series Integrated Services RoutersLED IndicatorsControl Source DescriptionLED Color Port Bezel side.All models.Steady Green -System operates normally.Green and AmberSTATUS (System Status)Off—System is not out of reset or BIOS image is not loadable.Blinking Amber —BIOS/Rommon is booting.Steady Amber —BIOS/Rommon has completed booting,and the system is at the Rommon prompt or booting the platform software.Bezel sideOff—No tunnel.Green VPN OK Steady On—At least one tunnel is up.Bezel SideNo LEDs On—No ServiceGreen and AmberLTE RSSI/Mode 1LED On—RSSI is under -100dBm.2LEDs On—Low RSSI,-99dbm <>-90dBm.3LEDs On—Medium RSSI -89dBm <>-70dBm.4LEDs On—High RSSI,>-69dBm.Green—LTE Amber—3GOverview of Cisco 1100Series Integrated Services RoutersLED IndicatorsControl SourceDescription LED Color Port Bezel Side On -GPS coordinates are acquired.Off -GPS is disabled,GPS is enabled without GPS mode and NMEA configuration,or GPS is acquiring.GreenGPSGreen—Standalone GPS Off—GPS not configured On—GPS configuredBezel side Green—Normal operating condition with at least one wireless client association.Green,Red,and AmberWLAN Red—Ethernet link is not operational or Ethernet failure.Amber—Software upgrade is in progress.I/O sideOff—No link Green Ethernet Switch GE LAN Ports,Non-PoESteady On—link Blink—TXD/RXD dataI/O side Off—No link,no device powered,PD denied power,power delivery fault PoE administratively disabled.Green and Amber Ethernet Switch GE LAN Ports,with PoEGreen Steady On—link;if PoE device,power is enabled.Green Blink—TXD/RXD dataAmber -PoE FaultI/O sideOff—No link Green GE WAN Ports Steady On—link Blink—TXD/RXD dataOverview of Cisco 1100Series Integrated Services RoutersLED IndicatorsControl Source Description LED Color Port I/O SideOff—ShutGreenDSL CDGreen Blink—Training,or no shut and cable disconnected.Green Steady On—TrainedI/O Side Green Steady On—-53.5V PoE power supply connected and all powered port operating normally.GreenPoE OK Off —No -53.5V PoE power supply connected to router.I/O SideOff—No Data Activity Green DSL Data Green Blink—TX/RX DataI/O sideGreen On—Console enabled.Green and AmberConsole/AUX Amber On—AUX enabled.I/O sideOff—No USB device discovered.GreenUSB Console On—USB device discovered.I/O SideOff:No USB device discovered.GreenUSB On:USB device discovered.Overview of Cisco 1100Series Integrated Services RoutersLED IndicatorsTable 3:LED Indicators for C1101-XControl Source Description Color LED I/OSystem Power Status Off:No PowerGreen Steady On:Normal operationGreen Blink:Boot up phase or in ROMMON modeAmber Steady on Or Blink:Some issues with the system.Green+AmberPowerI/OVPN Status Off:No tunnel Steady on:At least one tunnel is upGreen VPN OK I/OLink Activity Off :No link Steady on :Link Blink :TXD/RXD DataGreen Ethernet Switch GE LAN PortsI/OLink Activity Off:No link Steady on:Link Blink:TXD/RXD DataGreen GE WAN Ports Bezel SideSingle LTE Modem (one modem with SIMswitch-over capability).Off:Modem not up or modem up and no SIM.Amber Steady On:Modem up,SIM installed but not active.Green Blink:LTE data activity.Green and AmberLTE DATA/SIM (C1101-4PLTEPWz C 1101-4P L T E P /C 1101-4P L T E P W x )I/OWLAN Functions 3-color LED:Green,Red and AmberWLAN(C1101-4PLTEPWx)Overview of Cisco 1100Series Integrated Services RoutersLED IndicatorsControl Source Description Color LED I/OUSB Console Status OFF:USB console is not active.ON:USB console is active.GreenUSB ConsoleI/OUSB 3.0Status OFF:No USB device is connected.ON:USB device is commected.Green USB 3.0Reset ButtonThe actuation of the Reset button is only recognized during ROMMON boot,that is,as the router comes to the ROMMON prompt.The Reset button does not require much force to be actuated.The Reset button should be actuated only with a small implement such as the tip of a pen or a paper clip.When the Reset button is pressed at startup,the system LED turns green.For more information,see the "Reset Overview"section of the Cisco 1100Software Configuration Guide.Power SupplyCisco 111x Series ISRs support PoE and PoE+power to endpoints.The product power specifications are as follows:•AC input voltage:Universal 100to 240V AC •Frequency:50to 60Hz•Maximum output power:Up to 66W for non-PoE supply and up to 125W for PoE supply •Optional PoE and PoE+•Output voltage:+12VDC for system power and -53.5VDC for PoE powerSlots and InterfacesAbout Slots,Subslots,and Port NumberingThe Cisco 1100series designates its interfaces using a 3-tuple notation that lists the slot,sub slot and port in the format slot/sub-slot/port.The slot number is reserved for the mother board,which is "0".Each interface type is allocated a sub slot and the port number is a unique port on the interface.110011Overview of Cisco 1100Series Integrated Services RoutersReset ButtonTable 4:Slot,Bay,and Port NumberingInterface Type Subslot Ethernet LAN 0Ethernet WAN 1LTE 2DSL 3WIFI4Specifications of Cisco 1100Series Integrated Services RoutersFor specifications on the Cisco 1100Series ISRs,refer to the Cisco 1100Series ISR Specifications document.Periodic Inspection and CleaningWe recommend that you periodically inspect and clean the external surface of the router is recommended to minimize the negative impact of environmental dust or debris.The frequency of inspection and cleaning is dependent upon the severity of the environmental conditions,but we recommend a minimum once every six months.Cleaning involves vacuuming router air intake and exhaustvents.Sites with ambient temperatures consistently above 25°C or 77°F and with potentially high levels of dust or debris might require periodic preventative maintenance cleaning.Note110012Overview of Cisco 1100Series Integrated Services RoutersSpecifications of Cisco 1100Series Integrated Services Routers。
Cisco ASR 1000系列固定以太网线路卡数据表说明书
Data SheetCisco ASR 1000 Series Ethernet Line CardsProduct OverviewThe Cisco ASR 1000 Series Fixed Ethernet Line Cards (ASR1000-2T+20X1GE and ASR1000-6TGE) arefixed-port Ethernet line cards for the Cisco ASR 1000 Series Aggregation Services Routers. The line cards are capable of 40-Gbps full-duplex traffic forwarding using a fixed-port interface design. ASR1000-2T+20X1GE has twenty 1 Gigabit Ethernet ports and two 10 Gigabit Ethernet ports (Figure 1). ASR1000-6TGE has 6 10 Gigabit Ethernet ports (Figure 2).The Small Form-Factor Pluggable (SFP) and 10-Gbps SFP (XFP) modules allow you to configure the line card for different media types (copper or fiber) and different optical requirements (single- or multimode fiber), as available. The line cards have one power LED, one line-card status LED, and 22 port or link-status LEDs.Figure 1. Cisco ASR 1000 Series Fixed Ethernet Line Card (ASR1000-2T+20X1GE)Figure 2. Cisco ASR 1000 Series Fixed Ethernet Line Card (ASR1000-6TGE)Other aspects of the Cisco ASR 1000 Series Fixed Ethernet Line Cards (ASR1000-2T+20X1GE andASR1000-6TGE) include:●SyncE●Low price per port●Rich Ethernet Layer 2, Layer 3, IP, IPv6, and Multiprotocol Label Switching (MPLS) packet-processingcapabilities as previously provided on Cisco ASR 1000 platforms●Rich quality-of-service (QoS) functions:◦Ingress and egress QoS as previously provided on Cisco ASR 1000 platforms◦Egress queuing capability as previously provided on Cisco ASR 1000 platforms◦High- and low-priority lanes to Cisco ASR 1000 Series Embedded Services Processor (ESP) for high-priority, low-latency forwardingThe Cisco ASR 1000 Series Fixed Ethernet Line Card ASR1000-2T+20X1GE has the twenty 1 Gigabit Ethernet and two 10 Gigabit Ethernet ports built in; ASR1000-6TGE has six 10 Gigabit Ethernet ports built in, allowing the Cisco ASR 1000 Series Routers to achieve greater Ethernet density and a lower price per port. However, this fixed configuration means that the Ethernet line cards are not compatible with the Shared Port Adapters (SPAs) that are currently used with the SPA Interface Processor (SIP). Instead, the Ethernet line cards take the slot of the SIP with the twenty 1 Gigabit Ethernet and two 10 Gigabit Ethernet ports built in, or six 10 Gigabit Ethernet ports built in. Table 1 lists the differences between the Cisco ASR 1000 Fixed Ethernet Line Card and the Cisco ASR 1000 SPA Interface Processor.Table 1. Differences Between Cisco ASR 1000 Fixed Ethernet Line Card and Cisco ASR 1000 SPA Interface ProcessorOrdering InformationTables 2 and 3 give ordering information for the line cards and hardware, respectively, and Table 4 gives the minimum Cisco IOS® XE Software version required.Table 2. Ordering InformationTable 3. Cisco ASR 1000 Fixed Ethernet Line Cards Compatible HardwareRefer to the Cisco ASR 1000 Series Fixed Ethernet Line Card Hardware Installation Guide for the latest compatibility details.Table 4. Minimum Cisco IOS XE Software for Fixed Ethernet Line CardCisco Services for the Enterprise WAN EdgeCisco and our partners help make your enterprise WAN edge deployment a success with a broad portfolio of services based on proven methodologies. We can help you establish a secure, resilient WAN architecture and successfully integrate Cisco Unified Communications, Cisco TelePresence®, security, and mobility technologies with bandwidth to support video, collaboration, branch-office solutions, and growth in alignment with your business goals. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance concerns, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, please visit: /go/services.For More InformationFor more information about the Cisco ASR 1000 Series Fixed Ethernet Line Card, visit/en/US/docs/interfaces_modules/shared_port_adapters/configuration/ASR1000/fixed_etherne t_linecard/ASRoveth.html or contact your local Cisco account representative.。
Cisco ASR 1000系列聚合服务路由器系列产品介绍说明书
Cisco ASR1009-X Router and Cisco ASR1006-XRouter OverviewThis chapter contains the following topics:•Overview,on page1•Cisco ASR1009-X Router,on page1•Cisco ASR1006-X Router,on page4•Field-Replaceable Units for the Cisco ASR1009-X Router and Cisco ASR1006-X Router,on page6•Cisco Product Identification Standard,on page7•Serial Number and PID/VID Label Location,on page9OverviewThe Cisco ASR1000Series Aggregation Services Routers are mid-range edge routers that establish a newprice-to-performance class offering benefits to both enterprise and service providers alike.The Cisco ASR1000Series Aggregation Services Routers portfolio is based on an innovative custom-built ASIC calledQuantum Flow Processor that aggregates services at scale.The Cisco ASR1006-X Router and Cisco ASR1009-X Router create a future-proof modular routing platformto support next generation Forwarding and Route Processor modules with hardware redundancy.The CiscoASR1006-X Router and Cisco ASR1009-X Router provide up to200Gbps slot bandwidth to enable new highdensity Ethernet linecards utilizing the ASR1000-MIP100and Ethernet Port Adapters(EPAs),and integratingN+1power-on-demand design to the ASR1000portfolio.Cisco ASR1009-X RouterHardware Features of the Cisco ASR1009-X RouterThe Cisco ASR1009-X Router supports:•9Rack Units and3-line card slot chassis with redundant slots for forwarding and route processor boards•ASR1000-RP2module,future next generation ASR1000-RP3module,and ASR1000-ESP200,ASR1000-ESP100,and ASR1000-ESP40enginesFor information about the Cisco ASR1000-RP3module,see the Cisco ASR 1000Route Processor 3Installation and Configuration Guide .Note•Provides investment protection to support existing forwarding processor (ESP40,ESP100,and ESP200)•Provides future proof to support future next generation forwarding processor •100Gbps high density,modular Ethernet linecards (ASR1000MIP-100)•Three linecard slots support any of the following combinations:•ASR1000-SIP40with SPA•Ethernet linecard (ASR1000-6TGE and ASR1000-2T+20x1GE)•ASR1000-MIP100with EPA•New common fan modules to provide up to 30%better cooling for the chassis.Three fan modules per chassis•New power supplies are introduced for the chassis to provide greater power•Power-on-demand design with N+1power redundancy to meet any current and future power demand •Up to six AC or six DC power supplies that are aligned along the bottom of the chassis (power shelf)Cisco ASR 1009-X Overall Chassis Front ViewThe following figure shows the front of the Cisco ASR 1009-X Router.Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewCisco ASR 1009-X Overall Chassis Front ViewFigure 1:Cisco ASR 1009-X Router FrontViewSlot F06Slot F11Slot R07Slot R12Standby/ON switch 8Slot 23DB-25Alarm connector9Slot 14Power shelf that has power supplies from P0to P510Slot 05The Cisco ASR1009-X Router can support up to six AC or six DC power supplies.The chassis does not support mixed AC and DC configurationNoteCisco ASR 1009-X Chassis Rear ViewThe following figure shows the rear of the Cisco ASR 1009-X chassis with three fan modules and associated LEDs.Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewCisco ASR 1009-X Chassis Rear ViewFigure 2:Cisco ASR 1009-X Router RearViewFan Module 74Fan Module 8Status LED 1Fan Module 6Status LED 5Fan Module 82Fan Module 66Fan Module 7Status LED3The FAN OK LED can have three colors:Green,Red,and Amber.Green indicates Good,Red indicates Failed,and Amber indicates a Warning condition,when one or more fans may be operating at less than the expected speed,but not slow enough to call it a failure.NoteSee the Cisco ASR 1009-X Router and Cisco ASR 1006-X Router Power Supply LEDs section for more details.Cisco ASR 1006-X RouterHardware Features of the Cisco ASR 1006-X RouterThe Cisco ASR 1006-X Router supports:•6Rack Units and 2-line card slot chassis with redundant slots for forwarding and route processor boards •ASR1000-RP2module,future next generation ASR1000-RP3module,and ASR1000-ESP40and ASR1000-ESP100engines.For information about the Cisco ASR1000-RP3module,see the Cisco ASR 1000Route Processor 3Installation and Configuration Guide .Note•Provides investment protection to support existing forwarding processor (ESP40and ESP100)Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewCisco ASR 1006-X Router•Provides future proof to support future next generation forwarding processor.•100Gbps high density,modular Ethernet linecards (ASR1000-MIP100)•Two linecard slots support any of the following combinations:•ASR1000-SIP40with SPA•Ethernet linecard (ASR1000-6TGE and ASR1000-2T+20x1GE)•ASR1000-MIP100with EPA•New common fan modules to provide up to 30%better cooling for the chassis.Two fan modules per chassis.•New power supplies are introduced for the chassis to provide greater power•Power-on-demand design with N+1power redundancy to meet any current and future power demand.•Up to six AC or six DC power supplies that are aligned along the bottom of the chassis (power shelf)Cisco ASR 1006-X Overall Chassis Front ViewThe following figure shows the front of the Cisco ASR 1006-X Router.Figure 3:Cisco ASR 1006-X Router FrontViewSlot R06Slot F11Standby/ON switch 7Slot R12DB-25Alarm Connector8Slot 13Power shelf that has power supplies from P0to P59Slot 04Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewCisco ASR 1006-X Overall Chassis Front ViewSlot F05The Cisco ASR 1006-X Router can support up to six AC or six DC power supplies.The chassis does not support mixed AC and DC configuration.NoteCisco ASR 1006-X Chassis Rear ViewThe following figure shows the rear of the Cisco ASR 1006-X Router with two fan modules and associated LEDs.Figure 4:Cisco ASR 1006-X Router RearViewFan Module 6Status LED 3Fan Module 7Status LED 1Fan Module 64Fan Module 72The FAN OK LED can have three colors:Green,Red,and Amber.Green indicates Good,Red indicates Failed,and Amber indicates a Warning condition,when one or more fans may be operating at less than the expected speed,but not slow enough to call it a failure.NoteSee the Cisco ASR 1009-X Router and Cisco ASR 1006-X Router Power Supply LEDs section for more details.Field-Replaceable Units for the Cisco ASR 1009-X Router and Cisco ASR 1006-X RouterThe Cisco ASR 1009-X Router and Cisco ASR 1006-X Router has a number of FRUs.These include:•Route Processors •Forwarding ProcessorsCisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewCisco ASR 1006-X Chassis Rear View•Line Cards •SPAs •EPAs•AC and DC power supplies •FanmodulesFor information about the Cisco ASR1000-RP3module,see Cisco ASR 1000Route Processor 3Installation and Configuration Guide .NoteCisco Product Identification StandardThis section describes the Cisco products and services product identification standard.This feature provides you with the ability to effectively integrate and manage Cisco products in your network and business operations.Unique Device IdentifierThe Unique Device Identifier (UDI)is the Cisco product identification standard for hardware products.A product identification standard removes barriers to enterprise automation and can help you reduce operating expenses.The UDI provides a consistent electronic,physical,and associated business-to-business information product identification standard.The UDI is a combination of five data elements.The following table lists the UDI elements.Table 1:UDI ElementsDescriptionPhysical Visibility Electronic Visibility UDI Data Element Product ID,also known as product name,model name,product number YesYesPIDVersion IDYes Yes VID Serial number,the unique instance of the PID Yes Yes SN Type,such as chassis,slot,or power supply __Yes Entity Name Additional product information__YesProduct DescriptionThe combination of serial number and product ID (PID)is unique and consistent across all Cisco products.The PID that is coded on hardware is called a base product identifier.Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewCisco Product Identification StandardCisco ASR1009-X Router and Cisco ASR1006-X Router Overview Unique Device IdentifierAdditional orderable PIDs can be associated to a base PID.For instance,an orderable PID may describe apackaging configuration for a product or a bundled group of products sold,tested,and shipped together.Specific unique device identifier(UDI)benefits include the following:•Identifies:•Individual Cisco products in your networks•PIDs and serial numbers for service and replaceable products•Version IDs(VIDs)for product version visibility•Facilitates discovery of products subject to recall or upgrade•Enhances inventory automation of Cisco productsThe Cisco product identification standard provides the following features:•Version visibility—Cisco continuously improves products through feature additions.Product changesare indicated by incrementing the VID,which provides version visibility to help you understand andmanage product changes.VID management ensures consistency of changes from product to product.•Operating expense reduction—Cisco UDIs provide accurate and detailed network inventory information;identifying each Cisco product in a network element through a standard interface.Cisco operating systemscan view and use this data,allowing you to automate your electronic inventory.•Consistency across product layers—The UDIs are embedded in the hardware products and cannot beoverwritten.Operating and management systems discover UDIs through standard interfaces and displayUDIs in standard outputs.Standard interfaces include the IETF standard ENTITY-MIB.The show diag chassis eeprom detail command displays the PID,VID,PCB serial number,hardware revision,and other such information.The following is sample output from the show diag chassis eeprom detail command:ASR1009-X-2#show diag chassis eeprom detailMIDPLANE EEPROM data:EEPROM version:4Compatible Type:0xFFController Type:3172Hardware Revision:0.2PCB Part Number:73-16095-02Board Revision:01Deviation Number:0-0Fab Version:01PCB Serial Number:FXS1842043HRMA Test History:00RMA Number:0-0-0-0RMA History:00Top Assy.Part Number:68-5423-01CLEI Code:SAMPL00XYZProduct Identifier(PID):ASR1009-XVersion Identifier(VID):V00Chassis MAC Address:0c09.2a0f.0000MAC Address block size:320Chassis Serial Number:FXS1845Q1QTAsset ID:Vendor ID:00Environment Monitor Data:000800F8Environment Monitor Data :0411DF 000CASR1006-X-1#sho diag chassis eeprom detail MIDPLANE EEPROM data:EEPROM version :4Compatible Type :0xFF Controller Type :3171Hardware Revision :0.2PCB Part Number :73-16102-03Board Revision :01Deviation Number :0-0Fab Version:01PCB Serial Number :FXS1842046Z RMA Test History :00RMA Number :0-0-0-0RMA History:00Top Assy.Part Number :68-5481-01CLEI Code:SAMPL00XYZ Product Identifier (PID):ASR1006-X Version Identifier (VID):V00Chassis MAC Address :0c06.2a0e.0000MAC Address block size :256Chassis Serial Number :FXS1846Q415Asset ID :Vendor ID:00Environment Monitor Data :000800F8Environment Monitor Data:040F BE 002FCommon Language Equipment Identification (CLEI)code is a ten-digit character code that identifies a specific product.A CLEI code is applied to each part within a Cisco ASR 1009-X Router or Cisco ASR 1006-X Router as they are programmed in manufacturing for shipment to customers.NoteFor complete information on the product identification standard,see /go/udi/.Note Serial Number and PID/VID Label LocationThe following figure shows a Cisco ASR 1009-X Router along with the location of the serial number and the PID/VID label.Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewSerial Number and PID/VID Label LocationFigure 5:Cisco ASR 1009-X Router Serial Number and PID/VID LabelLocationThe following figure shows a Cisco ASR 1006-X Router along with the location of the serial number and the PID/VID label.Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewSerial Number and PID/VID Label LocationFigure 6:Cisco ASR 1006-X Router Serial Number and PID/VID LabelLocation1009-X 1006-X 11Cisco ASR 1009-X Router and Cisco ASR 1006-X Router OverviewSerial Number and PID/VID Label Location1009-X1006-X 12Cisco ASR1009-X Router and Cisco ASR1006-X Router OverviewSerial Number and PID/VID Label Location。
Cisco ASR 9000系列可模块化的线路卡数据册说明书
Data SheetCisco ASR 9000 Series Modular Line CardsProduct OverviewThe Cisco® ASR 9000 Series modular line cards provide customers with a flexible solution supporting multiple combinations of Ethernet ports, all in a single slot of the Cisco ASR 9000 Series Aggregation Services Routers. Modular line cards support a wide range of interfaces and densities offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco ASR 9000 modular line cards and modular port adapter portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology.Using the modular line cards, the Cisco ASR 9000 Series can support customer applications including video-on-demand, Internet Protocol Television (IPTV), point-to-point video, Internet video, and cloud-based computing. These line cards can also be used to deliver economical, scalable, highly available, line-rate Ethernet andIP/Multiprotocol Label Switching (IP/MPLS) edge services. The Cisco ASR 9000 Series line cards and routers are designed to provide the fundamental infrastructure for scalable Carrier Ethernet and IP/MPLS networks, supporting profitable business, residential, and mobile services (Figure 1).Figure 1. Cisco ASR 9000 Series Modular Line CardsFeatures and BenefitsThe Cisco ASR 9000 Series modular line cards are fully compatible with the Cisco ASR 9922, 9010, and 9006 systems, route switch processors (RSPs), and line cards. No hardware upgrade to the chassis or cooling system is required. Total bandwidth is dependent on the number and type of RSPs installed.The new line cards deliver the ability to mix and match modular port adapters so that customers can customize each slot in the Cisco ASR 9000 to their specific port demands. As an example, a 4-port 10-Gigabit Ethernet modular port adapter can be matched with a 20-port 1-Gigabit Ethernet modular port adapter, all in a single slot.Each Cisco ASR 9000 Series modular line card provides simultaneous support for both Layer 2 and Layer 3 services and features, helping operators to qualify and stock a single line card that can be deployed in any combination of Layer 2 and Layer 3 applications. These capabilities help to reduce capital expenditures (CapEx) and operating expenses (OpEx), as well as reduce the time required to develop and deploy new services. The Cisco modular line cards set a new standard for service density, allowing operators to offer predictable, managed transport services while optimizing the use of network assets.The line cards, with their synchronization circuitry and dedicated backplane timing traces for accessing the RSP’s Stratum-3 subsystem, provide standards-based line-interface functions for delivering and deriving transport-class network timing, allowing support of network-synchronized services and applications such as mobile backhaul and time-division multiplexing (TDM) migration. Coupled with the Cisco RSP-440 route switch processor, the line cards can also be used for applications requiring IEEE 1588v2 synchronization services. Recognizing that real-time media dominate next-generation services, Cisco has integrated media-monitoring technology into the Cisco Modular line cards. This multimedia technology allows real-time monitoring and statistics collection of real-time video and voice flows, facilitating proactive maintenance and management of today’s interactive services.Addressing the advantages of consolidating IP and dense wavelength-division multiplexing (DWDM) networking, G.709 with Advanced Forward Error Correction (FEC) is provided. G.709 provides visibility into the DWDM transmission system to permit rapid detection and recovery from transmission-layer and DWDM impairments.G.709 can also be configured for proactive protection if signal degradation is detected; it prevents traffic loss and link outage. Advanced FEC extends transmission-layer performance, delivering extended performance over an amplified system without the cost of regeneration or transponders.Table 1 lists the features and benefits of the Cisco modular line cards. Specific feature and scale support is hardware and software dependent.Table 1. Features and Benefits of Cisco ASR 9000 Series Modular Line CardsLine Card TypesThe Cisco ASR 9000 Series modular line cards are available in Service Edge Optimized and Packet Transport Optimized variants.●Service Edge Optimized line cards are designed for customer deployments requiring enhanced quality ofservice (QoS).●Packet Transport Optimized line cards are designed for network deployments where basic QoS is required. Different line card types may be mixed within the same system.Feature licenses are also available to turn on advanced featu res on the line cards, as described in the “Software Licensing” section later in this document.Product SpecificationsTable 2 provides product specifications for the Cisco ASR 9000 Series modular line cards.Table 2. Product Specifications1Short-term refers to a period of not more than 96 consecutive hours and a total of not more than 15 days in 1 year. (This number refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.)Weights and DimensionsTable 3 shows the different physical dimensions and associated weight of the ASR 9000s modular line cards and modular port adapters.Table 3. Physical DimensionsPluggable InterfacesThe Cisco ASR 9000 Series Modular Line Cards support a wide range of SFP, XFP, and QSFP pluggable interfaces. Please see the Cisco ASR 9000 Transceiver Modules: Line Card Support data sheet for a complete list.System RequirementsThe Cisco ASR 9000 Series Modular Line Cards may be deployed in the 20-slot, 10-slot and 6-slot chassis, with Cisco IOS XR Software Release 4.2.0 or later. Table 4 shows the system software requirements.Table 4. System Software RequirementsSoftware LicensingLine Card Feature LicensesIn addition to the two optimization versions of the Cisco modular line cards, optional per-line-card feature licenses can be used to turn on advanced features on the line cards. Layer 3 VPN licenses provide access to VPN Routing and Forwarding (VRF) instances on a per-line-card basis. They include the Infrastructure VRF license to support up to 8 VRF instances and Advanced IP licenses to support up to full-scale VRF instances. The Advanced Optical license enables G.709 and FEC for DWDM systems on a per-line-card basis. The Advanced Video license enables inline video monitoring feature on a per-line-card basis. Table 5 lists the line card feature licenses.Table 5. Feature Licenses for Cisco ASR 9000 Series Modular Line CardsSystem-Level Feature LicensesCisco modular line cards also support the deployment of advanced features based on Cisco ASR 9000 Series system-level licenses. The Lawful Intercept license enables lawful intercept for surveillance of packet streams that flow through Cisco ASR 9000 ports. The Advanced Mobile license enables the IEEE 1588-2008 protocol to distribute precision time and frequency across the network. The Broadband Network Gateway (BNG) license enables high-scale Ethernet BNG with session and subscriber awareness. Inline video monitoring on Cisco Modular line cards can also be enabled using a system-level Advanced Video License. Table 6 lists the system licenses supported by Cisco Modular line cards.Table 6. System-Level Feature Licenses Supported by Cisco Modular Line CardsOrdering InformationTable 7 provides ordering information for the Cisco ASR 9000 Series modular line cards and modular port adapters.Table 7. Ordering InformationDownloading the SoftwareVisit the Cisco Software Center to download Cisco IOS Software.Cisco Services for the Cisco ASR 9000 SeriesThrough a lifecycle services approach, Cisco delivers comprehensive support to service providers to help them successfully deploy, operate, and optimize their IP Next-Generation Networks (IP NGNs). Cisco Services for the Cisco ASR 9000 Series Aggregation Services Routers provide the services and proven methodologies that help assure service deployment with substantial return on investment, operational excellence, optimal performance, and high availability. These services are delivered using leading practices, tools, processes, and lab environments developed specifically for Cisco ASR 9000 Series deployments and post-implementation support. The Cisco Services team addresses your specific requirements, mitigates risk to existing revenue-generating services, and helps accelerate time to market for new network services.For more information about Cisco Services, contact your local Cisco account representative or visit/go/spservices.。
网络-思科ASR1000配置指导
Cisco ASR1000 Embedded Services Processor, 20G,Crypto
B
Cisco ASR1000 Embedded Services Processor, 20G,Crypto,Spare B
$25,200 $25,200 $56,700 $56,700 $56,700 $56,700 $105,000 $105,000
Cisco ASR1000 Route Processor 1, 2GB DRAM, Spare
B
$25,200 $25,200
第三步－业务处理引擎配置
1、ASR1000上支持三种业务处理引擎：ESP5/ESP10/ESP20，其中ESP5只能用在1002 上，ESP10可以用在1002/1004/1006三种机型上，ESP20仅能用在1004/1006上。
ASR1K Embedded Services Processor,5Gbps,Crypto,ASR1002 only B
ASR1K Embedded Services Processor,5G,Crypto,1002 only,spare B
Cisco ASR1000 Embedded Services Processor, 10G,Crypto
注：由于1006支持双主控，当1006配置双主控时，必须配置两块ESP，即RP与ESP配 置数量必须一致
ASR1000-ESP5 ASR1000-ESP5= ASR1000-ESP10 ASR1000-ESP10= ASR1000-ESP10-N ASR1000-ESP10-N= ASR1000-ESP20 ASR1000-ESP20=
B
Cisco ASR1000 Embedded Services Processor, 10G,Crypto,Spare B
ASR ASR 系列路由器基本操作
3.查看时钟
Rack1-ASR(config)# do show clock
07:07:51.806 china Wed Oct 17 2012
Page:6
ASR1000升级ROMMON
1.拷贝ROMMON文件到RP Bootflash或harddisk
Rack1-ASR#copy ftp://asr:asr@10.74.5.45/asr1000-rommon.152-1r.S.pkg bootflash:
Router#sh plat Chassis type: ASR1006
Slot
Type
State
Insert time (ago)
--------- ------------------- --------------------- -----------------
0
ASR1000-SIP40
ok
Slot Card Type
Ver. Device: "ID-Name" Version
Version
==== ====================== ====== ================== =========== ==============
0/1 SPA-1XOC3-AT<DISABLED> 1.80 ????????????
ok
00:03:15
检查SPA FPD版本
Page:8
Router# show hw-module subslot all fpd
==== ====================== ====== =============================================
ASR104-ASR1000系列路由器基本操作
ok
00:03:15
检查SPA FPD版本
Page:8
Router# show hw-module subslot all fpd
==== ====================== ====== =============================================
H/W Field Programmable Current Min. Required
*Sep 10 03:30:47.921: %SPA_OIR-3-SPA_POWERED_OFF: subslot 0/0: SPA 1xOC3 ATM SPA powered off after 5 failures within 1200 seconds *Sep 10 03:30:47.921: %SPA_OIR-6-OFFLINECARD: SPA (SPA-1XOC3-ATM-V2) offline in subslot 0/0 *Sep 10 03:30:47.913: %ATMSPA-3-HW_ERROR: SIP0/0: SPA-1XOC3-ATM-V2[0/0] Error 0x1C53 SPI4 initialization failed
IOS
IOS XE 平台抽象层
IOS
IOS XE 平台抽象层
IOS
IOS XE 平台抽象层
IOS
IOS XE 平台抽象层
ASR1000 IOS XE 硬件转发使用QFP
Page:2
CAT4500/3850 IOS XE 硬件转发使用交换芯片
ISR4400系列 IOS XE 硬件转发使用商用网络处理器
Hale Waihona Puke % Cannot get FPD version information from SPA-1XOC3-ATM-V2 in subslot 0/1.
CiscoASR1000系列路由器提供了高度可靠
Integrated Security
Network Foundation Protection Unified Threat Management Encryption Services
In-Service Upgrade System Redundancy Application Availability
12 Slot
2 2 3 H/W n/a 10.5” (6RU) 10-40+ Gbps Up to 20 MPPS
IOS Redundancy
Built-In GigE Height Bandwidth Performance On-Chassis Services
SBC, FW, IPSec, IDS, DPI, ISG +
Aggregated Services and Scale
Cisco Confidential
List Price
Price includes Chassis, engine
6
ASR 1000-腾空出世
Next-generation Midrange Router Series
– 2RU / 4RU / 6RU chassis – 5 / 10 / 20+ Gbps forwarding with services – Simple scale: 10-20-(40G) just by changing Forwarding Processor (ESP) – Dual AC or DC power supplies
Simple Migration
– SPA support – same interfaces as Cisco 7600 / 10000 / 12000 / CRS-1 – IOS features, CLI – simple migration from existing 7200 deployments
思科ASR1000配置指导
第二步－主控板配置 第二步－
目前ASR1000只有一种主控板RP1，内存缺省为2G，最大支持4G 支持双主控， 配置双主控时， 注：由于1006支持双主控，当1006配置双主控时，必须配置两块ESP，即RP与 ESP配置数量必须一致
ASR1000-RP1 ASR1000-RP1= Cisco ASR1000 Route Processor 1,2GB DRAM Cisco ASR1000 Route Processor 1, 2GB DRAM, Spare B B $25,200 $25,200
Embedded Services Processor,5Gbps,Crypto,ASR1002 only B Embedded Services Processor,5G,Crypto,1002 only,spare B ASR1000 Embedded Services Processor, 10G,Crypto B ASR1000 Embedded Services Processor, 10G,Crypto,Spare B ASR1K Embedded Services Processor,10G,Non Crypto B ASR1K Embedded Services Processor,10G,Non Crypto,SpareB ASR1000 Embedded Services Processor, 20G,Crypto B ASR1000 Embedded Services Processor, 20G,Crypto,Spare B
思科ASR 1000系列嵌入式服务处理器产品手册说明书
思科 ASR 1000 系列嵌入式服务处理器产品手册思科公开信息目录产品概述 (3)平台概述 (3)特性和优势 (4)使用案例 (4)平台支持和兼容性 (5)产品规格 (9)系统要求 (16)性能和扩展 (17)订购信息 (27)思科服务 (27)保修信息 (27)思科环境可持续性 (27)Cisco Capital (28)相关详细信息 (28)文档历史记录 (29)思科® ASR 1000 系列嵌入式服务处理器 (ESP) 可以处理思科 ASR 1000 系列汇聚多业务路由器的所有网络数据平面流量处理任务。
这些 ESP 在维持线路速度的同时支持激活并发增强网络服务，如加密、防火墙、网络地址转换(NAT)、服务质量 (QoS)、NetFlow 和许多其他功能。
图 1 显示了思科 ASR 1000 系列 ESP 100 和 ESP 200。
思科 ASR 1000 系列路由器部署于企业数据中心或大型办公室的广域网边缘以及运营商的入网点 (POP)。
此系列路由器依赖 ESP 的强大功能来汇聚多个流量和网络服务（包括加密和流量管理），并以线速通过广域网连接进行转发。
思科 ASR 系列提供从 2.5 到 200 Gbps 的路由器选项，包含多种型号和许可选项，以满足不同类型的组织和不同规模的位置对速度和预算的需求。
这些路由器的思科 ASR 1000 ESP 组件使用并行处理加快服务交付速度。
ESP 基于思科 QuantumFlow 处理器(QFP)，以支持新一代硅片中的转发和队列。
ESP 以 20、40、100 和 200 Gbps 的数据平面转发吞吐量速率运行。
思科 ASR 1001-X、ASR 1001-HX、ASR 1002-HX 和 ASR 1002-X 路由器以及 100 及 200 Gbps ESP 共同引进第二代思科 QuantumFlow 处理器 (QFP) 硬件和软件架构。
ASR 1000 使用基于 QFP 的 ESP 作为核心，可以实现以下功能：●处理所有的基准包路由操作，包括 MAC 地址分类、第 2 层和第 3 层转发、QoS 分类和 NetFlow 数据分组计费●执行高级服务，例如 IPsec 加密、NAT、防火墙、AppNav、应用可视性与可控性 (AVC)、性能路由 (PfR)和定位器 ID 分离协议 (LISP)；提供多种功能的第 2 层连接选项，如 MPLS 以太网 (EoMPLS)、虚拟专用局域网服务 (VPLS)、重叠传输虚拟化 (OTV) 和虚拟可扩展局域网服务 (VXLAN)平台概述ASR 1000 系列路由器支持以下嵌入式服务处理器：●思科 ASR 1000 系列 20 Gbps 嵌入式服务处理器●思科 ASR 1000 系列 40 Gbps 嵌入式服务处理器●思科 ASR 1000 系列 100 Gbps 嵌入式服务处理器●思科 ASR 1000 系列 200 Gbps 嵌入式服务处理器思科 ASR 1000 系列 ESP 100 和 200ESP 的主引擎是 Cisco QFP，是业内第一款可编程应用感知网络处理器。
思科 ASR 1000 系列共享端口适配器 SPA接口处 产品手册
产品手册思科 ASR 1000 系列共享端口适配器和 SPA 接口处理器支持产品概述思科®接口灵活性 (I-Flex) 设计将共享端口适配器 (SPA) 与 SPA 接口处理器 (SIP) 相结合，可扩展，可帮助管理语音、视频和数据服务的服务优先级。
SPA 为各种路由器连接（包括铜缆、信道化、SONET/SDH 分组传输 [PoS]、ATM 和以太网）提供物理接口。
思科 ASR 1000 系列 SIP 为 SPA 提供物理连接，最多可容纳四个半高和两个全高思科 SPA。
企业和运营商客户可以充分利用模块化端口适配器（可在思科路由平台之间互换）所带来的插槽经济性优势。
I-Flex 设计可最大程度地增加连接选项，并通过具有线速性能的可编程接口处理器提供强大的服务智能功能。
I-Flex 可加快实现服务效益，并提供一组丰富的服务质量 (QoS) 功能，以交付优质服务，同时有效地降低总拥有成本。
图 1 显示思科 ASR 1000 系列支持的各种 SPA 中的一个示例，图 2 显示思科 ASR 1000 系列的思科 Webex®节点。
图 3 显示思科 ASR 1000 系列 SIP。
图 1. 思科 ASR 1000 系列 SPA图 2. 适用于思科 ASR 1000 系列的思科 Webex 节点图 3. 思科 ASR 1000 SPA 接口处理器模块化端口适配器和可编程接口处理器可在思科运营商路由平台之间互换，可帮助企业和运营商公司保护网络投资并降低总拥有成本。
思科 SPA/SIP 产品组合提供丰富的服务质量 (QoS) 功能，可实现优质服务交付。
特性和优势思科 SPA/SIP 产品组合具有许多优势，包括：●业界模块化、灵活、智能程度最高的接口处理器：◦SPA/SIP 融合了软件即服务 (SaaS) 和企业网络功能，使您能够轻松进行协作，并通过适用于思科 ASR 1000 系列的思科 Webex 节点减少 Webex® Web、IP 语音 (VoIP) 和视频会话消耗的带宽。
Cisco工业以太网1000系列交换机数据表说明书
Data SheetCisco Industrial Ethernet 1000 Series SwitchesProduct OverviewThe Cisco® Industrial Ethernet (IE) 1000 Series Switches are compact rugged switches aimed at operational technology (OT) users with limited IT network knowledge. The IE 1000 Series Switches provide an easy transformation from the legacy factory to digital solution. For machine builders and machine-to-machine (M2M) solutions, it is an attractive entry level product as a GUI-based, lightly-managed switch. The IE 1000 is a good fit for locations with harsh temperatures and small spaces and is Power over Ethernet (PoE) capable with zero IT management.The IE 1000 is ideal for industrial Ethernet applications where small and easy-to-be-managed hardened products are required, including factory automation, intelligent transportation systems, city-surveillance programs, building automations etc.The Cisco IE 1000 Series Switches complement the current industrial Ethernet portfolio of related Cisco industrial switches, such as the Cisco IE 2000, IE 3000, IE 4000 and IE 5000 Series managed Switches.The IE 1000 can be easily installed on your network. Through a user-friendly web device manager, the IE 1000 provides easy out-of-the-box configuration and simplified operational manageability to deliver advanced and secure multiservices over industrial networks.Features and BenefitsThe Cisco IE 1000 Series Switches are designed for low cost, low ports, and small sizes. They offer:●Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) andGigabit Ethernet (GE), copper and fiber uplinks options●Easy integration: Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressingand simple web GUI-based management●PnP (Plug and Play): Automates the process of provisioning the new devices in to the network by applyingconfigurations, installing required image without manual intervention.●Fast startup time: Starts 30 seconds from cold boot●Manageability: Web GUI interface, and diagnostics and analysis options through Simple NetworkManagement Protocol (SNMP) and syslog●Security: secure access; port-security; TACACS+ and RADIUS AAA Client: Security protocols to controlaccess into networks;●IEEE 802.1x security: Provides an authentication mechanism to devices wishing to attach to the network.Single host mode with MAC authentication bypass.●Minimize data load: VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping tofilter unwanted data●Lightly-managed: Spanning-tree protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco DiscoveryProtocol aware●Sticky-MAC: Enables the IE1K to retain MAC addresses it dynamically learns and avoid new devices toconnect on the port●BootP server with per-port support:When client sends a BootP request, the server responds with BootPresponse based on same DHCP pool configuration.●Gigabit uplink: Two fiber-optic SFP based uplink for up to 50 miles (80 kilometers) links●Industrial PoE: Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models●Redundant voltage feeds, alarm relays support and DIN rail mount●Industrial environmental compliance and certifications: Ethernet/IP (CIP)Product Specifications●Maximum Forwarding Bandwidth 2.8Gbps●Maximum Switching Bandwidth 5.6GbpsDetailed Product InformationFigure 1 shows switch models, and Table 1 shows the Cisco IE 1000 Series Switches configuration information. Table 2 lists the SKUs for power supplies. Table 3 includes the 1000 product specifications. Table 4 lists software features. Table 5 includes compliance specifications. Table 6 outlines management and relevant industry standards.Figure 1. Cisco Industrial Ethernet 1000 Series SwitchesTable 1. Cisco IE 1000 Series Switches ConfigurationsTable 2. Power Supplies and Mounting Kit Available for Cisco IE 1000 Series Switches1 The entire power budget for the switch and PoE ports needs to stay within the power supply.2 The power supplies are not certified for smart grid and hazardous locations. These power supplies are IP20 rated.3 Power Supplies Datasheet Link: https:///c/en/us/products/collateral/switches/industrial-ethernet-switches/datasheet-c78-742180.htmlTable 3. Product SpecificationsTable 4. Cisco IE 1000 Software FeaturesTable 5. Compliance SpecificationsTable 6. Management and StandardsFigures 2 through 5 show the mechanical dimension details of the various IE 1000 models. Figure 2. IE1000-4T1T-LMFigure 3. IE1000-6T2T-LMFigure 4. IE1000-4P2S-LMFigure 5. IE1000-8P2S-LMWarranty InformationWarranty information for the Cisco IE 1000 Series Switches is available at https://www.cisco-/warrantyfinder.aspx.Cisco and Partner ServicesAt Cisco, we’re committed to minimizing our customers’ TCO, and we offer a wide range of services programs to accelerate customer success. Our innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco Services helps you protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business.Some of the key benefits our customers can receive from Cisco Services are:●Mitigating risks by enabling proactive or expedited problem resolution●Lowering TCO by taking advantage of Cisco expertise and knowledge●Minimizing network downtime●Supplementing your existing support staff so they can focus on additional productive activitiesFor more information about Cisco Services, visit Cisco Technical Support Services or Cisco Advanced Services athttps:///connectdots/serviceWarrantyFinderRequest?fl=sfCisco CapitalFlexible Payment Solutions to Help You Achieve Your ObjectivesCisco Capital makes it easier to get the right technology to achieve your objectives, enable business transformationand help you stay competitive. We can help you reduce the total cost of ownership, conserve capital, andaccelerate growth. In more than 100 countries, our flexible payment solutions can help you acquire hardware,software, services and complementary third-party equipment in easy, predictable payments. Learn more.For More InformationFor more information about the Cisco IE 1000 Series Switches, visit https:///go/ie1000 or contactyour local account representative.Printed in USA C78-737277-09 06/19。
Cisco ASR 1001-X 路由器硬件安装指南说明书
C H A P T E R2-1Cisco ASR 1001-X Router Hardware Installation GuideOL-32376-022Cisco ASR 1001-X Router Supported Hardware ComponentsThis chapter contains information about the supported hardware components on the Cisco ASR 1001-X Router, and contains the following sections:•Supported Hardware Components, page 2-1•Supported Half-Height SPAs, page 2-2•Supported Small Form-Factor Pluggable (SFP and SFP+) Transceivers, page 2-3•Supported NIMs, page 2-4•Cisco ASR 1001-X Router Power Supplies, page 2-5Supported Hardware ComponentsTable 2-1 lists the hardware components supported on the Cisco ASR 1001-X Router.T able 2-1Supported Hardware ComponentsComponent Description Chassis 1 RU form factorEthernet Ports Six built-in Gigabit Ethernet and two built-in 10-Gigabit Ethernet ports ESPA nonmodular, fixed ESP with a default throughput of 2.5 Gbps, which is upgradable with a software-activated performance license of 5 Gbps, 10 Gbps, or 20 Gbps.Route Processor Single integrated route processor SIP Integrated SIPSPA Slots 1 half-height (HH) SPA bay NIM Slots 1USB Slots2Chapter2 Cisco ASR 1001-X Router Supported Hardware Components Supported Half-Height SPAsSupported Half-Height SPAsTable2-1 lists the supported half-height SPAs on the Cisco ASR 1001-X Router.Supported Half-HeightSPAsT able2-2Supported Half-Height SPAsPID DescriptionSPA-1X10GE-L-V2Cisco 1-Port 10GE LAN-PHYSPA-1XCHSTM1/OC31-port Channelized STM-1/OC-3c to DS0SPA-1XOC12-POS1-port OC12/STM4 POSSPA-2XOC12-POS2-port OC12/STM4 POSSPA-4XOC12-POS4-port OC-12/STM-4 POSSPA-8XOC12-POS8-port OC12/STM4SPA-1XOC3-ATM-V21-port OC-3c/STM-1 ATMSPA-2X1GE-V2Cisco 2-Port Gigabit EthernetSPA-2XCT3/DS02-port Channelized T3 to DS0SPA-2XOC3-POS2-port OC3/STM1 POSSPA-8XOC3-POS8-port OC-3/STM-1 POSSPA-1XOC48POS/RPR1-port OC48/STM16 POS/RPRSPA-2XOC48POS/RPR2-port OC48/STM16 POS/RPRSPA-2XT3/E32-port Clear Channel T3/E3SPA-3XOC3-ATM-V23-port OC-3c/STM-1 ATMSPA-4X1FE-TX-V2Cisco 4-Port Fast Ethernet (TX)SPA-4XCT3/DS04-port Channelized T3 to DS0SPA-4XOC3-POS4-port OC3/STM1 POSSPA-4XOC48POS/RPR4-port OC48/STM16 POS/RPR Shared PortAdaptersSPA-OC192POS-XFP1-port OC192/STM64 POS/RPR XFP OpticsSPA-4XT-SERIAL Cisco 4-port serial SPASPA-4XT3/E34-port Clear Channel T3/E3SPA-5X1GE-V2Cisco 5-Port Gigabit EthernetSPA-8X1FE-TX-V2Cisco 8-Port Fast Ethernet (TX)SPA-8X1GE-V2Cisco 8-Port Gigabit EthernetSPA-8XCHT1/E18-port Channelized T1/E1 to DS0SPA-1XOC12-ATM-V21-port OC12 STMSPA-DSP Digital Signal Processor SPASPA-1X10GE-WL-V2Cisco 1-port 10GE LAN/WAN-PHYSPA-2CHT3-CE-ATM2-Port Channelized T3/E3 ATM and CircuitEmulation SPACisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter2 Cisco ASR 1001-X Router Supported Hardware ComponentsSupported Small Form-Factor Pluggable (SFP and SFP+) TransceiversT able2-2Supported Half-Height SPAs (continued)PID DescriptionSPA-4XOC3-POS-V24-port OC-3/STM-1 POSSPA-2X1GE-SYNCE1Cisco Synchronous Ethernet SPASPA-8XT3/E3Cisco 8-Port Clear Channel T3/E3 Shared PortAdapterSPA-24CHT1-CE-ATM Cisco 24 Port T1/E1/J1 Circuit Emulation SPA1.There is a limitation for clock switchover scenarios between the Cisco ASR 1001-X Router's built-in ports and theMetronome SPA. All the other functionalities on the Metronome SPA are supported.Supported Small Form-Factor Pluggable (SFP and SFP+) TransceiversTable2-3 and Table2-4 list the supported SFP optics and SFP copper interfaces on the Cisco ASR1001-X Router.T able2-3Supported 1 GE SFP Optics and SFP Copper InterfacesPID DescriptionSFP-GE-S1000BASE-SX SFP (DOM)GLC-SX-MMD1000BASE-SX SFP transceiver module, MMF,850nm, DOMSFP-GE-L1000BASE-LX/LH SFP (DOM)GLC-LH-SMD1000BASE-LX/LH SFP transceiver module,MMF/SMF, 1310nm, DOMSFP-GE-Z1000BASE-ZX Gigabit Ethernet SFP (DOM)SFP-GE-T1000BASE-T SFP (NEBS 3 ESD)GLC-BX-U1000BASE-BX SFP, 1310NMGLC-BX-D1000BASE-BX SFP, 1490NMGLC-GE-100FX100FX SFP on GE portsGLC-SX-MM GE SFP, LC connector SX transceiverGLC-LH-SM GE SFP, LC connector LX/LH transceiverGLC-EX-SMD GE SFP, LC Connector, EX transceiverGLC-ZX-SMD1000BASE-ZX SFP transceiver module, SMF,1550nm, DOMDWDM-SFP1000BASE DWDMCWDM-SFP1000BASE CWDMCisco ASR 1001-X Router Hardware Installation Guide OL-32376-02Cisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter 2 Cisco ASR 1001-X Router Supported Hardware ComponentsSupported NIMsSupported NIMsThe Cisco ASR 1001-X Router supports the following NIM form factors:•NIM-SSD •NIM-T1/E1NIM-SSDTable 2-5 lists the supported NIM with Solid State Disk (SSD) on the Cisco ASR 1001-X Router:NIM-T1/E1Table 2-6 lists the supported T1/E1 NIMs on the Cisco ASR 1001-X Router:T able 2-4Supported 10 GE SFP Optics and SFP Copper InterfacePIDDescriptionSFP-10G-SR 10GBASE-SR SFP+ Module for MMF SFP-10G-SR-X SFP-10G-LR 10GBASE-LR SFP+ Module for SMF SFP-10G-LR-X SFP-10G-ER 10GBASE-ER SFP+ Module for SMF SFP-10G-ZR10GBASE-ZR SFP+ Module for SMFT able 2-5Supported NIM SSDsPart Number DescriptionNIM-SSD NIM Carrier Card for SSD drives SSD-SATA-200G 200 GB, SATA Solid State Disk SSD-SATA-400G400 GB, SATA Solid State DiskT able 2-6Supported NIM-T1/E1sPart NumberNumber of Ports Clear-Channel Data MFT Packet VoiceUnstructuredE1 (G.703) Support Channelized Data NI M -1M FT-T1/E1 1Yes No No No NI M -2M FT-T1/E1 2Yes No No No NI M -4M FT-T1/E1 4Yes No No No NIM-8MFT-T1/E18Yes No No No NI M -1CE1T1-PRI 1YesNoYesYes2-5Cisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter 2 Cisco ASR 1001-X Router Supported Hardware ComponentsCisco ASR 1001-X Router Power SuppliesCisco ASR 1001-X Router Power SuppliesThe Cisco ASR 1001-X Router supports AC and DC power supply options. The modular chassisconfigurations support the installation of two power supplies for redundancy. When an external power supply fails or is removed, the other power supply provides power requirements for the chassis. This allows you to hot-swap the power supply without impacting the functionality of the router.Power Supplies for the Cisco ASR 1001-X RouterEach Cisco ASR 1001-X Router power supply provides 250 W of output power. The power supplies are used in a 1 +1 redundant configuration. There is no input switch on the faceplate of the power supplies. A power supply is switched from Standby to On by way of a system chassis STANDBY/ON switch. When facing the rear of the chassis, power supply slot 0 (PS0) is to the left (next to the power supply standby switch) and power supply slot 1(PS1) is to the right.The Cisco ASR 1001-X Router supports the following power supplies:•Cisco ASR 1001-X Router AC power supply—Provides 250 W output power with DC voltage output of +12 V. The AC power supply operates between +85 and +264 VAC. The AC power supply current shares on the 12 V output and is used in a dual hot pluggable configuration.•Cisco ASR 1001-X Router DC power supply—Provides 242 W output power with DC voltage output of +12 V. The power supply operates between –40 and –72 VDC. The DC power supply current shares on the 12 V output and is used in a dual hot-pluggable configuration.NoteThe Cisco ASR 1001-X Router can support two AC or two DC power supplies. Do not install mixed AC and DC power supply units in the same chassis.Figure 2-1 shows both the DC and AC power supplies for the Cisco ASR 1001-X Router.NI M -2CE1T1-PRI 2Yes No Yes Yes NI M -8CE1T1-PRI 8YesNoYesYesT able 2-6Supported NIM-T1/E1s (continued)Part NumberNumber of Ports Clear-Channel Data MFT Packet VoiceUnstructuredE1 (G.703) Support Channelized Data2-6Cisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter 2 Cisco ASR 1001-X Router Supported Hardware ComponentsCisco ASR 1001-X Router Power SuppliesNote2-7Cisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter 2 Cisco ASR 1001-X Router Supported Hardware ComponentsCisco ASR 1001-X Router Power SuppliesCisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter 2 Cisco ASR 1001-X Router Supported Hardware ComponentsCisco ASR 1001-X Router Power SuppliesAC/DC Power System Input Range and Voltage for the Cisco ASR 1001-X RouterThe power supply DC Input Range is –40 to –72 VDC, and the AC Input Range is +85 to +264 VAC. Table 2-7 describes the Cisco ASR 1001-X Router power supply LEDs.Power Cords Supported by the Cisco ASR 1001-X RouterTable 2-8 lists the power cords that are supported by the Cisco ASR 1001-X Router.T able 2-7Cisco ASR 1001-X Router—AC and DC Power Supply LEDsLED Color and State DescriptionOK - (Solid green)Input power is on and within the normal operating range. On the AC unit, the LED is solid green when the system in powered on. When the system is powered off, the LED will blink until the AC power is removed.OK - (Blinking Green at the rate of one blink per second)Input power that is within the normal operating range is being supplied, but the Standby switch is in the Standby position (and not in the On position).Fail - (Red)Power output has failed.OffPower supply is shut down.T able 2-8Power Cords Supported by the Cisco ASR 1001-X RouterPower Cord Item Number Description CAB-AC Power Cord, 110 V CAB-ACA Plug Power Cord, Australia, 10 A CAB-ACC Power Cord, ChinaCAB-ACE AC Power Cord, Europe, C13, CEE 7, 1.5 M CAB-ACI AC Power Cord, Italy, C13, CEI 23-16, 2.5 mCAB-ACR AC Power Cord, Argentina, C13, EL 219 (IRAM 2073), 2.5mCAB-ACS AC Power Cord, Switzerland, C13, IEC 60884-1, 2.5 m CAB-ACU AC Power Cord, UK, C13, BS 1363, 2.5 m CAB-IND AC Power Cord, IndiaCAB-JPN AC Power Cord, Japan, C13, JIS C 8303, 2.5 m CAB-L620P-C13-US Power Cord, 250 VAC, 15A, NEMA L6-20 to C13, U.S.CAB-L620P-C13-JPN Power Cord, 250 VAC, 15A, NEMA L6-20 to C13, JapanCAB-C13-CBN Cabinet JumperPower Cord, 250 VAC 10 A, C14-C13 ConnectorsCisco ASR 1001-X Router Hardware Installation GuideOL-32376-02Chapter 2 Cisco ASR 1001-X Router Supported Hardware ComponentsCisco ASR 1001-X Router Power SuppliesCAB-C13-C14-JMPR Cabinet JumperPower Cord, 250 VAC 13 A, C14-C15 Connector CAB-C13-C14-2M Power Cord Jumper, C13-C14 Connectors, 2-Meter LengthCAB-C13-C14-ACPower Cord Jumper, C13-C14 Connectors, 3-Meter LengthT able 2-8Power Cords Supported by the Cisco ASR 1001-X Router (continued)Power Cord Item Number DescriptionChapter2 Cisco ASR 1001-X Router Supported Hardware Components Cisco ASR 1001-X Router Power SuppliesCisco ASR 1001-X Router Hardware Installation GuideOL-32376-02。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
Data SheetCisco ASR 1000 Series Shared Port Adapter SupportProduct OverviewThe Cisco® Interface Flexibility (I-Flex) design combines shared port adapters (SPAs) and SPA interface processors (SIPs), taking advantage of an extensible design that facilitates service prioritization for voice, video, and data services. SPAs provide the physical interfaces for router connectivity ranging from copper, channelized, POS, ATM and Ethernet. The Cisco® ASR 1000 Series SIP provides the physical termination for the SPAs and accepts up to four half-height and 2 full height Cisco SPAs. Enterprise and service provider customers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco routing platforms. The I-Flex design maximizes connectivity options and offers powerful service intelligence through programmable interface processors that deliver line-rate performance. I-Flex enhances speed-to-service revenue and provides a rich set of quality-of-service (QoS) features for premium service delivery while effectively reducing the overall cost of ownership. Figure 1 shows a sample of the wide range of SPAs supported on the Cisco ASR 1000 Series and Figure 2 shows the Cisco WebEx™ node for the Cisco ASR 1000 Series. Figure 3 shows the Cisco ASR 1000 Series SPA Interface Processor.Figure 1. Cisco ASR 1000 Series SPAsFigure 2. Cisco WebEx Node for the Cisco ASR 1000 SeriesFigure 3. Cisco ASR 1000 Series SPA Interface ProcessorModular port adapters and programmable interface processors, which are interchangeable across Cisco carrier routing platforms, help enterprise and service provider companies protect network investments and reduce total cost of ownership. The Cisco SPA/SIP portfolio offers a rich set of QoS features for premium service delivery.Features and BenefitsThe Cisco SPA/SIP portfolio offers many advantages, including:●Industry's most modular, flexible, intelligent interface processors◦Blends Software as a Services (SaaS) and Enterprise networking to enable Collaboration with Confidence and reduces bandwidth consumption for WebEx web/VoIP/video sessions with the Cisco WebEx node for the Cisco ASR 1000 Series◦Powerful flexibility provides mix-and-match interface types on the same interface processor for consistent services, independent of access technology.◦Pioneering programmable interface processors provide flexibility for the service diversity required in next-generation networks.– The innovative design provides intelligent delivery of services without compromising on performance.●Increased speed to service revenue◦The programmable Cisco architecture extended to 20 Gigabit Ethernet dramatically improves customer density, increasing potential revenue per platform.◦Interface breadth (copper, Channelized, Packet over SONET/SDH [PoS], ATM, and Ethernet) on a modular interface processor allows service providers to more quickly roll out new services, helping ensure that allcustomers large and small receive consistent, secure, and guaranteed services.◦High-density Small Form-Factor Pluggable (SFP) interfaces are featured for high-port-count applications with reach flexibility. Future optical technology improvements can be adopted using existing SPAs.Product SpecificationsFor product specifications for all Cisco SPAs, please go to the following Website:/en/US/products/ps6267/prod_module_series_home.html.Table 1. Ordering InformationProduct Name Product NumberASR1000 SPA Interface ProcessorCisco ASR1000 Series SPA Interface Processor 10G ASR-1000-SIP10WebEx Node SPAWebEx node SPA for ASR 1000SPA-WMA-K9ATM SPACisco 1-Port Clear Channel OC3 ATM Shared Port Adapter SPA-1XOC3-ATM-V2Cisco 3-Port Clear Channel OC3 ATM Shared Port Adapter SPA-3XOC3-ATM-V2Cisco 1-Port Clear Channel OC-12/STM-4 ATM Shared Port Adapter SPA-1XOC12-ATM-V2Serial and Channelized SPACisco 8-Port Channelized T1/E1 Shared Port Adapter SPA-8XCHT1/E1Cisco 4-Port Channelized T3 (DS0) Shared Port Adapter SPA-4XCT3/DS0Cisco 2-Port Channelized T3 (DS0) Shared Port Adapter SPA-2XCT3/DS0Cisco 1-port Channelized STM-1/OC-3c to DS0 Shared Port Adapter SPA-1XCHSTM1/OC3Cisco 1-port Channelized OC12/STM4 to DS0 Shared Port Adapter SPA-1XCHOC12/DS0Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter SPA-2XT3/E3Cisco 4-Port Clear Channel T3/E3 Shared Port Adapter SPA-4XT3/E3Cisco 4-Port Serial Interface Shared Port Adapter SPA-4XT-SerialEthernet SPACisco 4-Port 10BASE-T/100BASE Fast Ethernet Shared Port Adapter, Version 2SPA-4X1FE-TX-V2Cisco 8-Port 10BASE-T/100BASE Fast Ethernet Shared Port Adapter, Version 2SPA-8X1FE-TX-V2Cisco 2-Port Gigabit Ethernet Shared Port Adapter, Version 2SPA-2X1GE-V2Cisco 5-Port Gigabit Ethernet Shared Port Adapter, Version 2SPA-5X1GE-V2Cisco 8-Port Gigabit Ethernet Shared Port Adapter, Version 2SPA-8X1GE-V2Cisco 10-Port Gigabit Ethernet Shared Port Adapter, Version 2SPA-10X1GE-V2Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter, Version 2SPA-1X10GE-L-V2Packet Over Sonet (POS)Cisco 2-Port OC3c/STM-1c POS Shared Port Adapter SPA-2XOC3-POSCisco 4-Port OC3c/STM-1c POS Shared Port Adapter SPA-4XOC3-POSCisco 8-port OC3/STM4 POS Shared Port Adapter SPA-8XOC3-POSCisco 1-Port OC12c/STM-4c POS Shared Port Adapter SPA-1XOC12-POSCisco 2-port OC12/STM4 POS Shared Port Adapter SPA-2XOC12-POSCisco 4-port OC12/STM4 POS Shared Port Adapter SPA-4XOC12-POSCisco 8-port OC12/STM4 POS SPA Shared Port Adapter SPA-8XOC12-POSCisco 1-port OC48/STM16 POS/RPR Shared Port Adapter SPA-1XOC48-POS/RPRCisco 2-port OC48/STM16 POS/RPR Shared Port Adapter SPA-2XOC48POS/RPRCisco 4-port OC48/STM16 POS/RPR Shared Port Adapter SPA-4XOC48POS/RPRCisco 1-port OC192/STM64 POS/RPR XFP Optics Shared Port Adapter SPA-OC192POS-XFPCisco Services for the Enterprise WAN EdgeCisco and our partners help make your enterprise WAN edge deployment a success with a broad portfolio of services based on proven methodologies. We can help you establish a secure, resilient WAN architecture and successfully integrate Cisco® Unified Communications, Cisco TelePresence™, security, and mobility technologies with bandwidth to support video, collaboration, branch solutions, and growth in alignment with your business goals. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functionality, solve performance issues, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, visit: /go/services.For More InformationFor more information about the Cisco shared port adapters, visit/en/US/products/ps6267/prod_module_series_home.html or contact your local Cisco account representative.。