T+12.0报价工具
T+12.0标准版环境配置
1.运行环境本产品使用MSSQL2005及以上版本的数据库，但不能使用MSSQL2008，建议时候用MSSQL2008 R2。
增加环境检测的相关程序，对于造成错误的情况，检测错误原因，能够检测到的信息进行提示，方便用户操作。
软件环境1.单机或服务器操作系统：（简体中文版）Windows XP+SP3（仅支持单机）Windows 2003 Server+SP2（标准版和企业版）x64,x86Windows 7（仅支持单机）不支持家庭版Windows 2008 R2Win2012Win8/8.1运行库：NETFramework4.0+SP1（简体中文）只能运行在中文简体的操作系统下。
2.数据服务器数据库（简体中文版本）MSSQLServer2005+SP2 (企业版以上）MSSQLServer2008R2(Standard、Enterprise) x64，适用于支持的win2003,win7(不推荐),win2008R2、win2012操作系统支持了简版数据库3.客户端WEB浏览器：IE8.0简体中文版IE9.0简体中文版IE10 ，但不支持IE10 64位IE11 ，但不支持IE11 64位操作系统：（简体中文版）Windows XP + SP3Windows 2003 Server+SP1(标准版、企业版)Windows 7Windows2008 Server+SP1(及以上版本补丁)Windows2008 Server R2 （X64）Win2012Win8/8.1Windows Vista(不建议使用)硬件环境1.客户端计算机配置：建议配置要求：2.Web服务器和应用服务器，数据库服务器Web服务器和应用服务器：影响Web服务器和应用服务器的主要因素是CPU计算能力和内存大小，磁盘IO 性能不需要特别考虑。
所以建议配置为两路双核CPU2.0以上。
标配内存4G，如果支持的并发用户较多，可配置到8G以上，提高性能表现。
ERP-用友T+12.0产品全面介绍
则经常收了客户的钱后一个月
之后再发货（客户因为装修原 因）
还可根据销货单自动生 成出库单
流程灵活，按需选择
如果是流程简单、 货与款同时确认的 企业，可以选择业 务与仓库合并流程； 如果是流程规范、 职责明确的企业， 则可以选择业务与 仓库分开管理，如 果是先确认货款再 收发货的，则选择 先进/销货，再入/出 库流程；如果是先 收/发货，再确认货 款的，则选择先入/ 出库，再进/销货流 程。
异地办公、查账，简单又高效
产品安装与部署
安全保障机制 服务器位置 产品使用
Internet
账套隐藏
公司
公司/家/托管/任何地方
输密码见账套
家
任何可以访问 网络的地方
关键亮点2：随时上线，灵活应用，快速交付
随时初始化
控制点：第一次结账前完成初始化
随时结账，不限时间
不控制必须结账
用友T+12.0产品全面介绍
实时管理，智慧协同
目录
1
整体介绍 财务管理 业务管理 生 移动应用 T+其它插件应用、电商平台、合并报表、预算管理
6
7
云时代的 T+ 2013 年，会计新时代 上下游协同
财务业务一体化
采购员 采购助理 库存核算员 销售助理 销售员
灵活立帐
可以按照销货单、进货单立帐，符合企业 的实际情况，让应收、应付账款的管理更 准确、更及时，操作更简捷
流程灵活，按需选择
财务
可根据企业需要选择业务流程：业务与仓库合并流程；业务与仓库分开流 程之先进/销货，后入/出库；业务与仓库分开流程之先入/出库，后进/销 货。
流程灵活 按需使用
IT-12D Ver_2.0 IT-12M 用户手册说明书
INTERPRETATIONIT-12D Ver_2.0IT-12M SYSTEMUser’s ManualImportant NoticeAll the safety and instructions for operation and use of the equipment should be read carefully• before the system is operated.Please keep this user manual for future reference.• Please follow all the operation instructions.• Cleaning: Make sure to turn off the power supply before cleaning. Use a dry soft cloth to clean • the equipment.Don’t leave the product in a place with high humidity and temperature.• Do not use any accessory, which is not recommended by the manufacturer .• Do not place the equipment on an unstable stand; Please use appropriate package or original • package by the manufacturer before transport to avoid damage caused by strong shake during transporting.Adequate ventilation is good for the maintenance of the equipment.• Power supply AC 100-240V.• Grounding: 3-wire grounding plug.• Hot swapping is prohibited.• Total 11 sets of IT-12D can be connected in one system. The cumulative cable • length should not exceed 70 meters. For particular requirement, please contact the nearest JTS Service Centre for information.For service, please contact the nearest JTS Service Centre. Do not take the equipment apart by • unauthorized personnel.All JTS products are guaranteed for 1 year except for the cases as follows caused by personal • reasons:A : Damage or malfunction caused by personal factors such as dropping, striking and so on.B : Damage or malfunction caused by improper handling of the operator.C : Parts loss or damage by taking apart by a unauthorized personal.Only use JTS tailor-made cables to connect the system.• Turn off the power supply and unplug the equipment from the power supply in case the • equipment is not in use for a long time.Upon receipt of the product, please fill out the Warranty Card enclosed and post it to JTS • Service Centre nearby in your region.TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.WARNING:To prevent fire or shock hazard,do not expose units to rain or moistureCAUTION: To reduce the risk of electric shock, DO NOT open covers, no useable serviceable parts inside. Refer servicing to qualified service personnel onlyThis label may appear on the bottom of the unit due to space limitations.The lightning flash with an arrowhead symbol,with an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.The exclamation mark within an equilateral triangle is intended to alert the user to thepresence of imporyant operating and maintenance (servicing)instructions in the literature accompanying the appliance.Attention: Installation should be performed by qualified service personnel only in accordance with the National Electrical or applicable local codes.Power Disconnect: Units with or without ON - OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however,the unit is operational only when the ON - OFF switch is in the ON position. The power cord is the main power disconnect for all units.1. System Introduction2. Product Introduction2-1 Language Distributor // IT-12M2-2 Interpreter Console // IT-12D2-3 Accessories3. System Installation & Connection3-1 General Description3-2 System Connection // Connection Cables3-3 Connection of Audio Cables3-4 System Mounting Instructions4. System Setup & Operation5. Technical Data 1 2 2 4 7 8 8 9 10 12 13 15INDEXRemark:JTS Company reserves the right to modify any issue without notice in advance.If any detailed information needed, please contact the local agent or JTS distributor in your region. JTS is the registered trademark of JTS Professional Co., Ltd.1The JTS IT-12 interpretation system consists of IT-12M and IT-12D.• The IT-12M works as main unit to provide power, input and output interface, and control.• The IT-12D is an interpreter console allowing two interpreters work together. Interpreters can• choose either floor channel for original language for direct interpretation or relay interpretation available via the relay select key.For small venue crossing interpretation is available here.• The whole system supports 11 interpreter consoles for simultaneous interpretation and delivers • 12 languages to audiences.The product is a stand along system. It is compatible with any conference system. So no matter • a new installation or an existing project needing expansion with interpretation IT-12 can easily meet the requirement.Together with JTS wireless system and any infrared system more audiences can participate in a • conference.INTERPRETATION SYSTEM22-1 Language Distributor // IT-12MCOMBO socket microphone input: This COMBO socket provides +48V Phantom power to a microphone with balanced XLR or unbalanced φ6.3 connector. The input signal will be mixed with the Original (CH0).Gain: Adjust input sensitivity of the COMBO socket. The adjustable range is ±10dB.Interpreter channel indicator: Light-On to indicate the correspondent channel is active. Flashing to indicate the correspondent channel is standby.Signal level indicator: the brightness of this LED indicates the signal level of the cor-respondent channel. Power on indicator (Red).Power Switch: Push the”│” on this switch will be turn system on, and push the”○” on this switch will turn system off.Power supply socket (3-wire grounding plus) with built in fuse, T2A/250V.DC power output: The IT-12M includ 12 outputs of DC power supply (+15V/500mA) to wireless transmitters, like JTS TG-10STX tabletop wireless transmitter.Interpreter console interface (D-sub 25pin socket):11 interpreter consoles can be connected in daisy chain (IT-12D).Record IN connector (RCA): external signal from play back devices will be mixed with the Original (CH0) for recording.Record output connector (RCA): Connect to recording equipment. The original signal (CH0) mixed with REC. IN will be recorded.12345678910113Original (CH0, floor channel) output (RCAx2/symmetrical output) : Original (CH0) balanced output with RCA connecters.12CH audio output interface: #0 to 11 correspond to the Original (CH 0) and 11 sets of Interpreter Consoles. Signals are for distribution to audiences via JTS wireless systems. Notice: any channel not in use will be assigned with CH0 as input.Original (CH0) volume control: This potentiometer adjusts the Original (CH0) sensitivity. Adjustable range is ±10dB.Original (CH0) input socket: This φ6.3mm balanced connecter is connected to an output of a conference system or PA as the original signal of the interpretation system.Alarm sound input:φ6.3mm jack / unbalanced input.Slow output: When a Slow Key on the IT-12D is activated this Slow output will generate an 1 sec. pulse to request the lecturer to slow down.Alarm control input: A short cut of Alarm Ctrl. and GND will activate alarm procedure. All channels will receive alarm signal, and indicator LED will change from Light-On to Flashing.121314151617182-2 Interpreter Console // IT-12DENTER key: To set the active channel of interpreter console. When switch on Switchthe ENTER indicator starts flashing. After push one of the selectable channels (fromCH1 to CH11 with Light On) this active channel can be stored to this interpreterconsole by pushing the ENTER key. Then switch off the Switch to end the procedure.CH1~CH11 Channel Output Key:• MODE switch at LOCK position: Under setting state, press it to select a selectable chan-nel (indicator on) for interpretation output. Only 1 channel can be set in one InterpreterConsole. The indicator of the activate channel is in green.• MODE switch at OPEN position: All of channel indicator are off when power oninitially. All channels are open to interpreter as long as it is not occupied by others. Whenthe channel is activated the Channel Output Key is in green. The indicator flashes in redwhich means this channel is in use by others.Note: MIC. ON/OFF at OFF state, the activate channel will be releasedwhen this channel number on other interpreter console is selected.19282820INTERPRETATION SYSTEM45Relay interpretation monitor (MONITOR): After pressing RELAY key, an interpreter can turn the monitor rotary knob to select an interpreted language he/she can understand to interpret.Headphone volume control (VOLUME A, VOLUME B): To adjust the volume of the headphones.Relay interpretation switch (RELAY): In case the interpreter doesn’t understand the original language, they can press the key and switch Monitor to another interpreted language from other interpreter for further interpretation.Floor Channel Switch (ORIGINAL): When the system start, the setting is by default, press it to listen to the original language (the speech from CH0).Mute Key (COUGH CUT): In case the interpreter coughs. Keep pressing the key to mute the line, meanwhile the indicator is on. When released, the line returns to working status.MIC ON/OFF button (MIC.A ON/OFF, MIC.B ON/OFF): Press it to turn the microphone on, the indicator will be on. Press it again to turn off the MIC.Only one microphone can be on at a time. MIC. A and MIC. B will override each other.Reminder key (SLOW): In case the delegate speaks too fast for the interpreter to follow, press it to request the delegate to slow down.MODE setting switch (OPEN / LOCK): The MODE switch needs be decided before power on. At the OPEN mode an interpreter can activate any channel in any time as long as it is not occupied. All channels are set off at the initial state, then an interpreter must select channel key which he wants. At the LOCK mode the interpreter can choose only one output channel which will not be taken by other users (setting procedure refer tostep and “System and Operation” chapter for more detail).Setting switch (SET): When all Interpreter Console are connected, setting of a channel of each console is needed for first time installation at LOCK mode. First turn the Switch to “ON”, the ENTER key will start flashing. According to above Step No.20 to select onechannel for the console. Then turn the Switch to “OFF” to finish the channel setting.To starting the channel setting procedure just turn the setting switches (SET) from “OFF”to “ON”. Finish the channel setting procedure by turn the setting Switch from “ON”to “OFF”.XLR microphone input: Each interpreter unit including 2 balanced XLR microphone input sockets with +48V Phantom power. These balanced microphones will be mixed with MIC. A/B.Input interface (INPUT): to connect the first Interpreter Unit to the IT-12M and the second one to the Output interface of the first unit (25-pin socket).29292929222123242526272829303132 33 34 35Output interface (OUTPUT): for connection with the next Interpreter Unit (25-pin plug).Recorder interface (REC OUT): φ3.5mm stereo, for connection with a recorder to record the interpretation. (Available on both left and right side of the Interpreter Console).Microphone input (MIC IN): φ3.5mm dummy stereo, for connection with microphone(Available on both left and right side of the Interpreter Console). Earphone output (EARPHONE):φ3.5mm stereo, for connection with interpreter headset (Available on both left and right side of the Interpreter Console).INTERPRETATION SYSTEM 62-3 AccessoriesAccessories are standard parts for a complete system installation, general description are as follow:IT-12-C3: 3 meter cable with D-sub 25-pin M/F on each end.Used to connect Interpreter Console (IT-12D) in daisy chain and to IT-12M.•Connecters: 1 Plug, 1 Socket.•3.System Installation & Connection3-1 General DescriptionIT-12 Interpreter System has a compact dimension and is easy for installation. IT-12Dinterpreter consoles are connected in daisy chain and the first IT-12D is connected to themain unit IT-12M.A detailed description of IT-12 Interpreter System installation and connection will begiven by diagrams and examples in this chapter.3-2 System Connection // Connection CablesAll consoles are connected via D-Sub 25-pin cable. A 25-pin 3 meter cable (with a plugand a socket) is included in each IT-12D Interpreter Console to connect the interpreterunit to Main Unit IT-12M or to each other. On the rear panel of IT-12D there are twoD-Sub connecters, the “INPUT” is a plug and the “OUTPUT” a socket. Connect theplug from the 25-pin cable to the Main unit IT-12M then the socket from the 25-pincable to the plug “INPUT” on the first Interpreter Console. And then connect the plugof the second 25-pin cable to the socket “OUTPUT” of the first Interpreter Console and the socket is connected to the plug “INPUT” of the next Interpreter Console. Then all the interpreter units are connected in daisy chain. As many as 11 interpreter units can beconnected for 12 languages (including floor channel) interpretation. Extension cablescan be used between Interpreter Consoles and Main Unit IT-12M (IT-12-C3/C6/C12/ C18).It is strongly recommended to use JTS tailor-made cables to ensure the best performance.CH113-3 Connection of Audio CablesCable connection plays an important role in the long distance audio transmission. Improper connection will result in interference. For example:(1)Connection for Unbalanced to Balanced transmission cable:Practical example: after the audios from signal source of mono RCA output, they go through to the IT-12M balanced input “LINE IN” (φ6.3mm jack) via unbalanced output.GND(SHIELD)shielded netBAL. + OR UNBAL.HI.BAL. - OR UNBAL.LO.353637* Note: This connection is not applicable to Balanced to Unbalanced transmission. Otherwise, the signal source of balanced output may be damaged.(2)Connection for Balanced to Balanced transmission cable:Practical example: After the audios from wired and/or wireless microphones are mixed via the mixer, they go through to the IT-12M balanced input “LINE IN” (φ6.3mm jack) via balanced output.(3)Connection for Unbalanced to Balanced XLR transmission cable:Practical example: the recording output of IT-12M “REC. OUT” (unbalanced output) to PA system or media recording input XLR interface (balanced input).* Note: This connection is not applicable to Balanced to Unbalanced transmission. Otherwise, the signal source of balanced output may be damaged.3-4 System Mounting InstructionsIT-12M Main unit Installation(1)Dimension (LxWxH):421 x 213 x 44mm (2)Colour: Silvery black (3)Weight:2.65Kg(4)“L” shape rack mount bracket for 1U 19-inch standard cabinet.(5)Mounting InstructionsA pair of rack mount brackets are equipped with the IT-12M , unscrew the screwson both sides firstly , then fasten the brackets with these screws and put the IT-12Min the rack, finally install the unit onto the rack with 4 screws .3839404.System Setup & Operation4-1 General DescriptionThis chapter provides a comprehensive and detailed description on how to setup and op-erate IT-12 Interpreter System Main Unit (IT-12M) and Interpreter Console (IT-12D).(1)OPEN Mode: Interpreter Console Output Channel Select (IT-12D)Select the Console with one of the Channel Output key ‘1, 2… 11”; for example: Ifyou want this unit to be NO. 1; just press “1”. Then the indicator on the key will lighton in green while the channel is not occupied. If the indicator on the key flashes in redthat means the channel is occupied by other units. When the MIC. ON/OFF of theactivated channel is at OFF state, the activate channel could be released when otherinterpreter console selects the same channel number.(2)LOCK Mode: Interpreter Console Output Channel Select (IT-12D)Interpreter Console must be assigned with one unique output channel before beingused. The procedure is as:a.Make sure the connection is correct, and then turn on the IT-12M.b.Turn the “SET” setting switch from “OFF” on the rear panel of the InterpreterConsole to “ON”, the indicators of “ENTER” on the unit starts flashing. The indica-tors of available channels will turn RED. Pay attention only one channel can beactivated.c.Assign the Console with one of the Channel Output key “1,2….11”, for example:If you want this unit to be NO 1, just press “1”. Then the indicator on the key willchange to Green light, press “ ENTER ” key to store, the indicator of “ ENTER ”will keep light on;d.Turn the “SET” setting switch to “OFF”, the “ENTER” indicator will turn off, thatmeans the output channel selecting procedure is completed;e.If cross interpretation is needed OPEN mode should be selected.f.Repeat the same procedure (Steps b~d) to assign all the Interpreter Consoles.(3)To Cancel Selected Output Channel (only for LOCK mode)a.Turn the “SET” from “OFF” to “ON”.b.Push the “ENTER” for 3 seconds. Then all Channel Output Indicators will turn off.c.Turn the “SET” from “ON” to “OFF”. The Console will be of factory setting now.(4)The Operation of IT-12D Interpreter Console:The Interpreter Console is designed with digital technologies and used in conjunction with interpreter headset. Each Console allows two interpreters to work on it. The operation procedures are as follows:a.At LOCK mode, when the output channel is selected an interpreter only needpush the MIC ON/OFF key to activate the microphone or deactivate it.b.At OPEN mode, an interpreter can press any Output Channel key to deliver thecorrespondent language. The available channel will show a green indicator. A flash-ing red indicator means the channel is occupied.c.Put on the headset, adjust the microphone to an appropriate position and controlthe volume (Floor language is “ORIGINAL” as defaulted). Press “MIC. A/B ON/ OFF” to start the interpretation.d.In case the interpreter doesn’t understand the floor language. He/she can select alanguage familiar with from other interpreter for relay interpretation. First press“RELAY” key, the indicator will be on, and then switch the MONITOR to choose a familiar language for interpretation.e.In case the Interpreter wants to cough, keep pressing “COUGH CUT” key to cutoff the language output, release it to continue the interpretation.f.When the speaker speaks too fast for the interpreter to follow, the interpreter canpress “SLOW” key to remind the speaker to slow down. A pulse signal will comeout as remind from the IT-12M to the speaker desk.g.Each Interpreter Console accommodates A/B two interpreters to work, the opera-tion A/B interpreter is the same.5. Technical Data5-1 System environmental Conditions5-2 Main Unit IT-12M Technical DataTransport Temp.: -40○C~+70○C Operational Temp.: 0○C~+45○C Max. Relative humidity: <95%Item..................................................Power supply..............................System consumption...........DC power output..................D-SUB power output.........Line In sensitivity....................Alarm In sensitivity................MIC In sensitivity...................Alarm Ctrl....................................Slow output................................CH0~CH11 output level CH0 balance output level REC OUT output level.....REC IN input level................protocol.........................................Dimension (LxWxH).........Color................................................Weight............................................Specification 110-240Vac 90W+15V/0.3A*12DC+15V/2A-30dB±2dB LEVEL VR at MAX.-20dB±2dB-51dB±2dB Gain VR at MAX.Shorted to GND +12V,Pulse 1sec.180mV±20mV85mV-GND85mV±10mV 170mV±15mV -25dB±2dB RS-485421*213*44mm Silvery Black 2.65KgInterpretation Unit (IT-12D) Technical DataItem.................................................. Unit power................................... Unit power consumption. MIC sensitivity......................... XLR MIC sensitivity............ Earphone output level........ REC OUT output level..... Protocol......................................... In/Out interface...................... Dimension (LxWxH)......... Color................................................ Weight............................................SpecificationDC+15V100mA±10mA-45dB±2dB-45dB±2dB120mV±10mV at 33Ω load, volume MAX. 140mV±10mVRS-485D-Sub 25P plug and socket330*206*57mmSilvery-blue black2.5Kg。
T+V12.3产品功能介绍-4制造业应用、5供应链应用
制造业应用—物料清单优化
维护界面改为页签方式
制造业应用—物料清单优化
支持定位功能
制造业应用—物料清单优化
支持带结构导出（12.2补丁）
制造业应用—多阶投产
适用范围：
有多层BOM结构，下达生产任务时，自动展开多层BOM的加工单，不用手工一层层下生产任务
功能
可根据销售订单、预测单多阶投产，可下达生产加工单、委外加工单
按BOM展开式，根据需求数量-可用库存，计算每阶需要下达的数量。
可用库存参数可设置
销售订单
生产加工单
多阶投产应用—多阶投产
1选择投产单据
投产数量计算说明=分析数量-库存可用量，当同一存货有多行时，按照分配顺序 分配。 分配顺序说明：先按需求日期，需求日期相同的按照第一步界面的先后顺序 取日期前可用量：勾选时，可设置日期。取可用量时，只取日期前的 不合并：投产数据为明细数据，不合并。场景：按明细跟踪销售订单 全阶投产：把单据产品、其下级的半成品都生成投产数据 可用量 存货：相同存货数据合并在一起。场景：多个订单有同一个存货，汇 单阶投产：只把单据产品生成投产数据 单据 存货 需求日期 数量 场景：比如分析时，只取 2017-11-06 存货 可用的量，则可把日期设成 可用量 总存货数据下达加工任务 支持级次投产：把指定级次的产品、半成品都生成投产数据 2017-11-06 存货+来源单号：同一来源单据号+存货合并在一起。场景：按订单号
，则给出的建议量为20（60-40），所以不要多次投产
4. 5.
多阶投产可用量分配时，是按照存货+必录自由项分配的 有自由项的存货，可用量参数考虑安全库存、最低库存时，按存货+必录自由项考虑。比如A存货启用自由 项颜色，安全库存为10，计算可用量时，A+白色，安全库存为10；A+蓝色，安全库存为10
T+12.0安装手册
1.1.3 硬件环境 应用\数据库服务器： 硬件参数 CPU 频率: RAM 大小： 磁盘转速： 并发人数： 服务器： 硬件参数 CPU 频率: RAM 大小： 1.1.4 系统库升级 安装过程会对现有系统库进行升级。不对产品的账套进行升级，升级账套需要安装完成后 Windows XP、Windows 7、Windows 8、Windows 8.1 >=Intel 双核 2.0G >=4G Windows 2003 Server、Windows 2008 R2 Server、Windows 2012 Server >=Intel 至强四核 2.0G >=8G SAS 10000 或 15000 RPM 转速 大于 10 人小于 30 人 >=Intel 至强八核 2.0G >=16G SAS 10000 或 15000 RPM 转速 大于 30 人
注意事项： 1、只使用 T+环境检测不需要修复只需要拷贝“T+环境检测”和“bin 目录” 2、系统修复程序都放到“third 目录” ，包括.net、IE、SqlServer、修改 TCP/IP 连接数限 制、WindowsInstall、系统常用补丁 3、不修复 XP 和 2003 系统可以不拷贝“third\WindowsSP 目录” ，此补丁比较大 3.2.2 环境检测 环境检测分三种环境：应用\数据库服务器、客户端、服务器 这里我们以服务器为例，点击“开始检测”对本机进行环境检测
安装类型包括：全部安装、应用服务器安装、数据库服务器安装 分离式部署时必须先安装数据库服务器后才能安装应用服务器， 安装应用服务器前请将 数 据 库 服 务 器 的 机 器 名 和 IP 地 址 添 加 到 系 统 hosts 文 件 中 ， 具 体 路 径 位 于 \%Systemroot%\System32\Drivers\Etc 文件夹中，如果系统安装在 C 盘，那么 Hosts 文件就在 C:\Widows\System32\Drvers\Etc 中。通过记事本打开后新输入一行，IP 地 址要放在每段的最前面，映射的 Host name(主机名)在 IP 后面，中间用空格分隔。 例如：192.168.1.100 TplusDBServer 注意事项：支持分离式部署，即一台电脑上安装应用服务器，另外一台电脑安装数据库 服务器，请注意数据库服务器只支持默认实例(MSSQLSERVER)，不支持其他实例名。安 装应用服务器时，数据库服务器不能为本机。 版本区分：普及版只能全部安装，不支持分离部署。专业版和标准版安装类型包括：全 部安装、应用服务器安装、数据库服务器安装。 2、安装位置 浏览并指定安装目录，注意安装所在路径的磁盘格式必须为 NTFS，磁盘可用空间必须 大于 1.5G。 注意事项：安装所在路径不能开启压缩，安装所在盘符不能开启磁盘配额。
T+报价
模块报价服务费模块名称模块说明站点数报价产品支持服务费系统运维服务费实施服务费普及账表包含总账、T-UFO两个功能模块，支持按部门、个人、往来单位、存货、项目设置辅助核算，限制1站点。
16,800详见产品支持服务费说明详见系统运维服务费说明产品模块标准报价25%或按照人天收取普及进销存包含采购、销售、库存核算、往来现金四个功能模块，只支持合并流程，具体功能清单请见附件。
18,800 316,800 529,800APP应用报价APP名称APP说明定价方式报价移动应用配置端连通手机和服务器按照功能6,800无移动应用手机端可在手机端实现商品价格和库存查询、客户查询，下达销售订单、销货单，各种报表查询，单据审批，订阅报表等。
按照时长30元/月/台访问端安全盾安全盾是畅捷通针对T+互联网访问特征定制的数据加密工具、具有帐套隐藏和远程快速登录功能。
按照功能280/把IP直通IP直通可实现固定域名到动态IP地址之间的解析。
按照时长360元/通行证/年模块报价服务费产品模块组模块模块说明基础模块价格许可单价产品支持服务费系统运维服务费实施服务费财务管理总账把专业账表拆成总账和报表8,8001-3站点每增1站点增3000元，3站点以上每增1站点增4000元详见产品支持服务费说明详见系统运维服务费说明产品模块标准报价25%或按照人天收取T-UFO把专业账表拆成总账和报表3,000出纳管理现金银行-出纳改为出纳管理，原来的现金银行-钱流功能与往来管理合并为往来现金3,800固定资产只支持固定资产，不支持无形资产、周转材料、生产性生物资产、长期待摊费用3,000票据打印票据打印专业打印工具，支持发票、进账单等专业票据打印，支持自定义套打（出入证、员工卡、奖状、快递单、收费票据等），可全面满足于财务、人事、企管等部门专业套打需要。
2,0002,000业务管理购销管理包含采购管理、销售管理、往来现金3个模块，还包含采购需求分析和进销项税对比查询，订购购销管理必须要订购库存核算。
T+12.0 VS T+11.6版本功能对比
基础设置-销售价格本区别 T+12.0 VS T+11.6版本功能对比
T+12.0版本
所有价格本表体支持条形码录 入功能，且增加查找功能
PK
T+11.6版本
价格本不支持条形码录入
目 录
平台环境 库存核算
系统管理
基础档案
凭证接口
分销管理
财务总账
往来现金 出纳管理 资产管理 采购销售
T+12.0新增功能
—— T+12.0 VS T+11.6版本功能对比
2015年4月
目 录
平台环境 库存核算
系统管理
基础档案
凭证接口
分销管理
财务总账
往来现金 出纳管理 资产管理 采购销售
零售管理
会员管理 促销管理 手机APP 工作圈
平台区别
T+12.0 VS T+11.6版本功能对比
目 录
平台环境 库存核算
系统管理
基础档案
凭证接口
分销管理
财务总账
往来现金 出纳管理 资产管理 采购销售
零售管理
会员管理 促销管理 手机APP 工作圈
往来现金
把现金银行－钱流并入业务往来，改名为往来现金
往来现金
情况类似， 只举了一例
往来现金
收入单、费用单：单结算情况下，单据列表中可以按结算方式、账号进行查 询
费用单类似
往来现金
12.0支持预收冲预收丶支持预付冲预付
往来现金
应收总账丶应付总账：支持单据表头公共自定义项作为查询条件,分组设置 增加了条件
T+11.6版本
T+12.0普及版亮点介绍
管钱、管货、管订单
管货
可用量控制、零出库控制、保质期预警查询
管钱、管货、管订单
管钱
应收、应付清清楚楚
管钱、管货、管订单
管钱
订金、折扣、现款、抹零都支持
管钱、管货、管订单
管钱
价格体系确保按企业政策执行
管钱、管货、管订单
管钱
信用控制与预警、最低销价控制降低企业风险
管钱、管货、管订单
管钱
历史价格查询让业务员不再尴尬
目录 1
易部署、易安装 易学习、易使用、易实施、易交付 B/S架构更适合多点办公 管钱、管货、管订单 算成本、出毛利 财务业务一体化 互联网+
原材料
采购 销售
信息传递
异地生产厂 市区总部
产成品
某工贸企业
目录 1
易部署、易安装 易学习、易使用、易实施、易交付 B/S架构更适合多点办公 管钱、管货、管订单 算成本、出毛利 财务业务一体化 互联网+
2
3
4
5 6 7
管钱、管货、管订单
2
3
4
5 6 7
B/S架构更适合多点办公
专业批发市场
有多个档口，多点销售，多点发货 档口与仓库不在一起，下单与发货地不同
批 发 市 场 某 批 发 企 业 异 地 仓 库
档口3
信 息 共 享 汇 总
市 场
档口1
档口
市 场
A B
档口2
信 息 传 递
某 批 发 企 业
仓库
B/S架构更适合多点办公
写字楼、商住楼
业务部门在市区内，仓库在郊区
销售
T+软件产品介绍及报价
一、功能介绍
1、适合企业（制造、酒店、餐饮、教育、公用服务、汽车配件等行业）
2、软件架构采用B/S架构,月底工作量大，适合经常出差，财务办公比较分散企业，只需要
一台服务器，其他办公地点采用IE登录模式进入软件做账方便、高效管控企业
3、该软件不需要年度结转，旧年度结账后数据自动过度到新的年度，软件支持跨年度查询
4、新软件-辅助核算中途启用、多辅助核算
5、凭证大小字体可以设置
6、新增同步工具账套与账套之间数据档案可以同步，相互复制
7、支持几家子公司报表汇总功能
二、软件报价
模式一
该部署方式服务器在本单位，软件终身买断，不存在后续费用
模式二
该部署方式服务器在用友集团总部，需每年缴纳费用，不是终身买断。
T+标准版+V12.0上市说明
T+标准版V12.0上市说明一、产品概述T+结合畅捷通100多万中小企业的管理经验，采用完全B/S结构及.NET先进开发技术，通过解决中小企业管理现状的重点问题，以及对业务过程主要环节的控制与管理，提升管理水平，为企业带来更多管理价值。
产品应用功能包括：采购管理、库存核算、销售管理、零售管理、促销管理、会员管理、生产管理、往来现金、固定资产、出纳管理、总账、T-UFO；主要应用于中小商贸企业、工业企业与工贸企业一体化管理。
客户应用价值：①、提高工作效率，加强部管控根据您的企业管理要求，量身定制业务流程和业务单据、业务报表，保证使用效率；通过自动化业务管控（价格、信用、库存）和自动化财务核算（成本、应收应付），加快各个环节处理效率，并提高管控力度；通过有效的信息共享，同时兼顾信息性，加快部门间沟通效率；通过预警、待处理业务自动推送，积极应对紧急任务，高效处理日常任务。
②、管好往来，管好资金通过有效的信用管理（业务员信用、客户信用）、信用预警、信用提示，减少坏账损失；灵活确定立账依据，可以更加精准的对应收应付进行预估；通过灵活的结算政策和收付款期限控制，准确预测未来各月资金状况。
③、管理库存，管好成本通过可自定义的可用量查询，准确监控库存未来状况；通过最低库存、最高库存、可用量控制等手段来降低库存水平，提高仓库作业效率；通过灵活的存货核算方法，为经营者提供实时库存成本。
④、提供手机移动管理，加强管理灵活性企业管理人员通过手机，可时时掌控企业日报；业务员通过手机，快速完成销售的各项业务，极提升了工作效率。
有自己送货车队的企业，可以通过手机下销货单业务来完成车销业务，实现客户现场‘钱、货’两清，避免了现场手工开单回公司后集单补录单，财务一单单对账的问题。
⑤、提供全生命周期的固定资产管理支持固定资产等企业固定资产的管理。
⑥、管好账簿、精细核算通过凭证管理和业务无缝衔接，支持企业财务业务一体化管理。
多辅助核算方式帮助企业从多维度了解企业经营情况。
T+V12.2产品功能介绍
3.
4.
表头表体切换：按【回车/tab】切换到表体，表体按【alt+回车】切换到表尾。
必输项定位：单据必录项未录入保存后，光标优先定位表头第一个有问题的字段上，表头没问 题再定位表体有问题的第一行第一个问题列上
直接针对c设置定价，比如用客户 价格本里的客户协议价，售价策略 里，客户协议价优先于客户折扣
001客户购买A品牌的商品，均按4.5折销售。 002客户购买所有商品，都是6折
003客户购买B分类下的存货，都是6折，但B分类下的c商品除外，c商品10元销售。 产品问题：12.1及以前版本，只支持按“客户分类+存货”或“客户+存货”设置价格； 当存货或客户较多时，设置太复杂（yuzy注：此处指客户价格本）。
营销—销售业务
价格及促销管理
设置售价带出策略
营销—销售业务
价格及促销管理
客户折扣权限设置
营销—销售业务
价格及促销管理
客户折扣设置：
1、按客户分类+存货分类/品 牌，或按客户分类设置折扣
2、按客户+存货分类/品牌， 或按客户设置折扣
营销—销售业务
价格及促销管理
取价顺序
运营
业务经营总览 出入库汇总表 分量盘点 配货管理：支持多客 户或多门店/仓库 物料清单批量增加/删 除、支持成本信息查 询 集成态发布
核算
调拨支持实时计价 移动平均重新计价按 业务发生顺序
交付性
稳定性，核心应用效 率提升 支持T3/T6固定资产 卡片升级 期间结转：支持选择 按余额、明细 支持最新的税控接口 及格式 实施工具：允许选择 清理范围，便于测试 与正式切换
2020畅捷通产品系列标准价格报价工具
T+专属云专业版
T+Cloud专业应用
T+Cloud报价说明 T+Cloud服务日期 计算 微信营销
备注说明：本工具适合畅捷通现有软件包产品（最新版本）的报价参考，相关产品实施服务及价格变动
2020年畅捷通产品标准报价工具
T3/T6
G
T6-企业管理软件V7.0 G3财务管理软件11.0
T1
T1-财贸宝 T1-工贸宝
T+/Tபைடு நூலகம்专属云
2020年畅捷
T+Cloud
T+普及版13.0
T+Cloud普及应用
T+标准版13.0
T+Cloud标准应用
T1-服装鞋帽 T1-商贸宝批发零售版 13.0
T1-商贸宝IT通讯版
T1PLus商贸宝普及版 V1.0
T+专业版13.0 T+系列产品实施服务及 系统运维说明
智+
会计票据工厂
全员裂变通
初级会计职称模拟考试系统
企业流程管理实训系统
商业潜质智能测评系统
财税一体化实训平台v2.0
畅捷通信息技术股份有限公司
T6产品实施服务及系 统运维说明
G6e财务管理系统12.1
T3-普及版11.2
T3-标准版11.2
相关产品实施服务及价格变动以官方发文为准
价工具
培教
畅捷教育云平台V2.0 畅捷通创学云平台（T+教育专 版）
云产品
工作圈 好会计
T3教育专版（各版本）
易代账
畅捷通企业管理信息化实训沙盘
好生意
畅捷通会计专业水平测试系统
T+12.0各个版本区别清单
单据审核、单据设计、打印管理、权限 √ 、报表中心中去掉隐藏的功能点
付款单
√
收款单
√
往来核销单
√
收入单
去掉【使用预收】字段，包括单据查询 √ 条件、列表栏目
费用单
关联单据不可编辑
√
去掉【使用预付】字段，包括单据查询 条件、列表栏目
汇兑损益调整单
√
银行存取款单
√
收款单明细表
√
付款单明细表
√
收入单明细表
选项（T），控制时点默认为审核，控制 方式默认为提示
进货单自动生成入 合并流程无此功能 库单
按照订单严格采购 选项（F）
往来
采购需求分析累计 选项（F）
下达数量允许超建
议按量照请购单严格下 选项（F）
单（整个页签）
默认按单核销
销售
按单严格执行
选项（F）
√
报价含税
选项（T）
√
业务员信用控制 选项（F）
进货单执行表
最高进价控制
√
按单严格执行
采购收货预警
隐藏往来单位存货 采购订单、进货单2张单据以及对应的明 √
细表、统计表结果的栏目涉及往来单位
存货，需要隐藏往来单位存货编码
模块流程图 工作台 报表方案 预制数据
按原型调整
√
去掉隐藏的功能点
√
预制方案
√
单据审核、单据设计、打印管理、权限 √
、报表中心中去掉隐藏的功能点
销售出库开单执行
表销售订单采购生产
执行表
销售订单跟踪工具
销售费用分摊
√
防伪税控接口
其它 单据
信用查询
查询条件：信用分析对象（默认结算客 √ 户）、业务员、到期基准日、是否超期 限去掉，但信用分析对象默认=结算客 户；分组条件：业务员去掉；查询结 果：超期预收款 去掉。
T+标准版发版说明(V12.2)
5.3. 销售价格管理.........................................................................................................19
5.4. 销售管理.................................................................................................................19
T+标准版 V12.2 产品发版说明
T+发版说明
畅捷通信息技术股份有限公司 2016 年 11 月
1
目录：
T+发版说明
1. 产品概述 ................................................................................. 5
5.1.9.
短信服务 ................................................................................................. 17
5.1.10. 安全盾.....................................................................................................17
5. 产品主要功能变化............................................................... 15
5.1. 系统管理.................................................................................................................15
畅捷通T+V12.1最新报价单
T3用友通查询工具 1-1站点:
T﹢硬加密_产品报价单
单位:元
产品线 模块名称 标准业务管理 标准购销管理 标准版业务 标准库存核算 标准财务管理 标准总账 标准T-UFO 标准出纳管理 标准版财务 标准固定资产 标准商贸管理 标准零售管理 标准会员管理 标准版商贸 标准版生产 标准促销管理 标准生产管理 标准自制加工 专业业务管理 专业购销管理 专业版业务 专业库存核算 专业财务管理 专业总账 专业T-UFO 专业出纳管理 专业版财务 专业资产管理 专业商贸管理 专业分销管理 专业零售管理 专业会员管理 专业版商贸 专业版生产 专业促销管理 专业生产管理 专业自制加工 标准零售收银 专业零售收银 站点用户价格 1-及以上站点: ([点数]-1)*5800元 16800元 9800元 1-及以上站点: ([点数]-1)*3800元 8800元 3000元 0元 3000元 1-及以上站点: ([点数]-1)*3000元 5000元 3000元 2000元 1-及以上站点: ([点数]-1)*5800元 16800元 1-及以上站点: ([点数]-1)*8800元 39800元 25600元 1-及以上站点: ([点数]-1)*4800元 10800元 4000元 4800元 6800元 1-及以上站点: ([点数]-1)*4000元 16800元 16800元 6800元 3800元 1-及以上站点: ([点数]-1)*8800元 28800元 1-及以上站点: [点数]*2000元 1-及以上站点: [点数]*2000元 1-1站点: 2-3站点: 普及进销存 普及账表 T6查询工具 T1查询工具 其他模块 硬加密工本费 4-5站点: 1-1站点: 1-1站点: 1-1站点: 1-1站点: 8800元 16800元 29800元 6800元 0元 0元 0元 300元 备注
VCDS工具和电话技术支持价格说明说明书
F .Y.I .Ross-Tech will begin charging for live telephone tech support of VW/Audi vehicle diagnostics, with two options available to registered users of the company’s VCDS tool: Those who an-ticipate using the service for more than seven cases per year can opt for the unlimited $250 annual subscription plan; those who expect fewer than sev-en cases per year would pay $35 per case. Vehicle troubleshooting assis-tance via e-mail and internet automo-tive forums will continue to be free, as will telephone technical support for the VCDS product itself.The new “A/C Equipment and Tools”catalog from Snap-on Tools features a wide assortment of products, such as a/c recyclers,service tools,t h e r m o m e -ters, manifold gauge sets and more.The 8-page publication (C a t a l o g 2011) also in-cludes the lat-est specialty tools, vacuum pumps, leak-detection tools and accessories. A copy of the catalog can be obtained by contacting your Snap-on franchisee or representa-tive, visiting or call-ing toll-free 877-SNAPON-2 (877-762-7662).Delphi ’s “Win the Delphi Dream Shop” giveaway will provide one lucky technician Delphi tools, equipment and training to help him upgrade his current shop or build his own Dream Shop. The prize is part of the compa-ny’s third annual Destination: Victory Lane promotion (/victorylane ). In addition to the Dream Shop grand prize, technicians also have a chance to win monthly, weekly and instant prizes, including 42-in. HD TVs, fender covers, technician gloves and other merchandise. Technicians can sign up at the website given through Oct. 16, 2011. Winners will be announced at the Automotive After-market Products Expo (AAPEX) in November.SMP has introduced its Standard brand “2011 Engine Management Electronic Illustrated Parts Guide” on DVD, which delivers additional,unique features not available in a printed catalog. One of the most im-portant benefits is the ability to regu-larly update the data electronically.Updates will be available through an internet update process that will auto-matically compare the data on a user’s computer to the latest available infor-mation and update only the data that has changed. Copies of the DVD are available from local territory managers.Motorists once again have the oppor-tunity to get cash back by mail when they install Bosch premium spark plugs, through the Bosch “Light ’Em Up 2011” spark plug rebate program.Motorists in the U.S. can get a rebate on Bosch Platinum Ir Fusion plugs,Platinum +4, Platinum +2 and Plati-num Plus plugs, and Super Plus plugs purchased from a participating retailer or installer. Rebate coupons are available at retail outlets or can be downloaded from www.bosch . The rebate program runs through June of this year.Automotive technicians, shop owners and managers are eligible to enter Matco Tools ’ “Tool Up! And Win”scratch-off card contest, which kicked off this month. Grand prize is three all-expenses-paid trips for two to the NHRA Finals in Pomona, CA,including dinner with top fuel drag-ster Antron Brown and more. Nine runners-up each will receive Matco Tools 5225 Toolboxes. The company will award 1200 Matco Tools Varsity Jackets to third-place finishers. For more contest details, log on to .LAUNCH has announced the fol-lowing promotional offering for the second quarter of 2011: With the purchase of a software renewal sub-scription for the company’s X-431 Stan-dard, Infinite,Tool, Master or Diagun (shown), the company will include a card that will ex-tend the war-ranty period of the scan tool for one extra year.The only prerequisite is that the sub-scription must be current or, at the very least, no more than 60 days ex-pired. For complete details, log on to .EngineQuest (EQ)has released a supplement to its 2010-2011 catalog that includes new applications for cylinder heads and head bolt sets, oil pans, cam thrust plates, guide plate conversion kits and more. To request a copy, call 800-426-8771 or log on to .Federal-Mogul has launched an in-teractive electronic catalog to help per-formance business enthusiasts and oth-er customers find high-quality parts for virtually any automotive, performance or marine application. The eCatalog is available at . Visit the site for more information, or con-tact your Federal-Mogul supplier. 54May 2011。
maxon lift corp. te-20, 72-150 liftgate 操作手册说明书
SUMMARY OF CHANGES: M-12-04, REVISION B
PAGE
COVER 12
DESCRIPTION OF CHANGE
Updated REV and date of release and copyright date. Added statement to get TE-20 & 72-150 maintenance and parts manuals from .
EXTENSION PLATE
DOCK BUMPER
CONTROL SWITCH
LIFT CYLINDER
PLATFORM OPENER
PARALLEL ARM
PLATFORM
STEP PUMP BOX
MAIN FRAME
RAMP FLIPOVER (WEDGE IS AVAILABLE)
LIFT FRAME
7. Never drive a forklift on the Liftgate platform.
8. Do not move vehicle unless Liftgate is correctly stowed.
9. Correctly stow platform when not in use. Extended platforms could create a hazard for people and vehicles passing by.
Visually check that all decals are in place (see DECALS page). Also,
make sure decals are legible, clean, and undamaged.