泰利特 2G 3G 4G NB LTE 产品 北美 LE910V2 产品手册说明书

]Delta SW North American LE910 V2 Products
80000DSW10127A Rev. 1 – 2018-07-06
1 6
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
NOTICE
While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.
It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country. COPYRIGHTS
This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product.
COMPUTER SOFTWARE COPYRIGHTS
The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.
USAGE AND DISCLOSURE RESTRICTIONS
I. License Agreements
The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.
II. Copyrighted Materials
Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit III. High Risk Materials
Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.
IV. Trademarks
TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners.
V. Third Party Rights
The software may include Third Party Right software. In this case you agree to comply with all terms and conditions imposed on you in respect of such separate software. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third Party Right software.
TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE.
NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
APPLICABILITY TABLE PRODUCTS
LE910-NA V2
LE910-NA V2 SINGLE SKU
LE910-NA1
LE910-NA1 SINGLE SKU
LE910B4-NA
LE910B1-NA
LE910B1-NA SINGLE SKU
LE910B1-SA
LE910-SV V2
LE910-SV1
LE910-SVL
CONTENTS
NOTICE 2
COPYRIGHTS (2)
COMPUTER SOFTWARE COPYRIGHTS (2)
USAGE AND DISCLOSURE RESTRICTIONS (3)
I.License Agreements (3)
II.Copyrighted Materials (3)
III.High Risk Materials (3)
IV.Trademarks (3)
V.Third Party Rights (3)
APPLICABILITY TABLE (4)
CONTENTS (5)
1.INTRODUCTION (6)
2.DELTA SW 20.00.XX4 – 20.00.XX5 (8)
New Features (8)
General Enhancements (9)
3.DELTA SW 20.00.XX2 – 20.00.XX4 (12)
New Features (12)
General Enhancements (14)
4.DOCUMENT HISTORY (17)
1. INTRODUCTION
1.1. Scope
Scope of this document is to detail the corrections, changes or enhancements made to the software of Telit modules.
1.2. Audience
This document is intended for Telit customers.
1.3. Contact Information, Support
For general contact, technical support services, technical questions and report documentation errors contact Telit Technical Support at:
•*****************
•*********************
•*****************
Alternatively, use:
/support
For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit:
Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements.
Telit appreciates feedback from the users of our information.
1.4. Related Documents
•Telit LE910-V2 Modules AT Commands Reference Guide, 80446ST10707A •Telit's Modules Software User Guide, 1vv0300784
2. DELTA SW 20.00.XX4 – 20.00.XX5
New Features
Description SW 20.00.xx5 Added AT#SHSANA and AT#SHSDLY AT commands. •
•
AT#DTMF=2 has been enabled, AT#OOBTSET has been
introduced (Cat-1 Ability to control in-band DTMF tones).
• Added Cat-1 Ability to control DTMF tone volume separately from
master volume.
• Added store/restore of the APN in the file system for NVM
recovery.
Supported DTMF URC on VoLTE. •
General Enhancements
Fixed Verizon TC 6.2 failure. •
Fixed NCM fallback when USB profile is configured as MBIM. •
Fixed Verizon TC 7.1.1 and TC 7.1.2 fail due to the calling of
• UtaMsNetAttachReq in case of refresh type 0.
•
Fixed Verizon TC 4.07 fail due to the calling of
UtaMsCallPsDefinePrimaryReq after DETACH.
Fix of VoLTE call fail after AT#SGACT command. •
Improvement on paging detection in case bad RF condition. •
•
Fixed unexpected "SIM not inserted" indication appearing during a
data session (#QSS: 0 during data session).
•
Fixed #MONI incorrect response for servant cell when the module
is registered in GERAN.
•
Fixed no apparent power saving for CFUN:5 in CMUX. The power
consumption during CMUX session now follows the physical DTR
state.
•
Fixed Verizon TC 4.6, 4.9 and 4.11 manage properly the DETACH
REQUEST for type 5 REFRESH and type 0 REFRESH in Verizon.
•
Fix of the first MT SMS which is now queued and handled correctly
when the SMS client is ready.
•
AT+CSQ is returning 99,99 when registered.
The fix consists also in checking the +CEREG registration status in
+CSQ delegation function.
Fixed LTE Data Retry handling of event list and counter in Attach
• Reject with cause 8 scenario.
Fix of memory leek scenario in
• TalCatUtaMsSimTkTerminalResponseCnfCb()/SIAL_TOOL_IND.
Improvement on updating the neighbors list with AT#MONI,
• sometimes the updating was not fast.
• SIM Profile Switch management: Add processing of
shutdown/startup indication of "Electrical deinit procedure" in case
"SIM init procedure" is running.
Also handled proactive command coming when ME currently
unable to process because bus.
• Blocked LDR NVM setting on reading SIM MCC/MNC in Intel CAT interface.
Fixed echo issue during MO voice calls by extending Echo
• Canceller tuning up to 16 kHz.
Extended delay on AT#FTPGETOTA attempts after first successful
• download.
Fixed IMS registration behavior after switching from USBCFG=3 to
• USBCFG=0.
Integrated fix for SIB decoding issue. •
Removed audio noise on VoLTE calls. •
Fixed call drop issues with VOLTE. •
Band 13 2nd harmonic margin improvement. •
Fixed Verizon 3-Way Calling failures. •
Fixed Normal Call and Call Forwarding failure. •
Fixed loose registration after PPP section. •
Removed wrong PLMN indication sent to AT parser. •
• The IPv6 network availability is checked only once in case of
failure, witching to IPv4-only connection and reducing an eventual
problem in a ~80 seconds long OMADM session.
The management of ACM_PROGRESS_IND and
• ACM_DISCONNECTED_IND has been aligned to the one in Intel
interface.
Resolved no audio and call drop with “RTP-RTCP Timeout”. •
• VoLTE Calls: incoming "Call waiting tone" now doesn’t excludes
audio path.
New +CEVDP and +CEMODE default for SKU SV products. •
After the attach complete, the module detached and re-attached on
• VZWINTERNET. The cause was the incorrect setting of the PCO.
Removed double selection request for file PNN. •
Modified NVM USBCFG default value. •
3.
DELTA SW 20.00.XX2 – 20.00.XX4
New Features Description SW 20.00.xx4
Support VOLTE on SV and NA variant. • DTMF decoding support for VOLTE on SV and NA variant. • AppZone: implemented new m2m_ssl API that allow to set right TLS protocol (TLS1.0/TLS1.1 and TLS1.2).
• AppZone: implemented new API m2m_ipraw_cfg for IPRAW IPV4 and IPV6.
• AppZone: implemented API to support AUXILIARY UART. • AppZone: implemented new API for Watchdog management. • AppZone: implemented new API to set context on specified CID. • AppZone: implemented new API m2m_hw_sleep_mode_cfg to manage power saving mode.
• AppZone: support for easyAT. • Support TLS1.2. • Verizon: Enabling support for SSL Server authentication and TLS 1.2.
•
Verizon: Support APN location 6, CGDCONT, VZWAPNE updated. Location APN 6 is updated also during OMA-DM.
• Support CFUN9 - Incoming GPRS packed wake-up the DUT. • ATT: Adding alert signal on ODIS parameter modification: An alert towards AT&T OMADM server is triggered one minute after each
HostOdis reset or set command.
• EasyIP: Increase number of sockets from 6 to 10. •
AT#MTUSIZE=<mtu>: implemented new AT command in order to
• set the MTU size.
MBIM: support multiple bearer connection in parallel. •
• AT#APPSSLCFG implemented AT command to configure cipher
suite, auth level and TLS version for a maximum of 5 applications.
Added storing of SMS in ME and SM memories. •
AT+CMAR/AT#CMAR: Implemented AT command to format NVM
• and Filesystem.
• AT#IIDIPV6=<cid>,<IID>: Implemented AT command in order to
set the IID to a certain CID.
AT#MBIMCFG: implemented AT command to configure CID to be
• used for MBIM connection.
• AT#PDPAUTH: implemented AT command to set the
authentication parameters for all CIDs.
AT#RXTOGGLE: Implemented AT command to set main or
• diversity antenna, command used in test mode for certification
purpose.
AT+IPR: Update UART speed up to 3Mbps. •
General Enhancements
Type Description SW 20.00.xx4
Improvement the report of AT+CSQ and AT+CESQ, adjust RSSI
•calculation.
•Manage properly NCM disconnection (AT#NCMD=0) and dialup
when they are used together.
Updated the +CCLK: time zone range to “-96…+96”. •
Fix on received URL #DTMFEV with DTMF enabled. •
Support +CRSM=192,28423 with a sim with pin enabled. •
Improvement on storing #HSMICG in the extended profile. •
Restored LTE neighbour information’s in AT#MONI and
•
AT#MONIZIP, added Added <qrxlevmin> and <pci> for serving cell.
restored timers T3402 and T3412 in AT#RFSTS. •
Development standard usage of with “[]:”, example
•
AT#FTPOPEN=”[ipv6_addr]:port_num.
Added timestamp on +CMT unsolicited in incoming PDU. •
Add conversion table from ISO Latin 8-bit to PCCP437. •
Antenna detection: Fix behavior of repGPIO on AT#GSMAD. •
STN: 254 not always received when performing a SAT request with
•Vodafone. Implemented a better handling for SIM APP END
indication.
Removed SIM switch off when CFUN=4 is issued to avoid IMS
•registration issue once CFUN=1 is used again. SIM remains active.
•
Fixed reply Time on AT#PING, it was not aligned to timeout
configured.
Improvement on AT#CSURV scan 4G channel without SIM. •
#PSNT Corrected handling of technology indication. It reported a
•wrong network type when EGPRS.
•AppZone: Improvement on #HTTPRCV to reports OK if called from
virtual com.
Improvement on AT+CRSM is locking up the AT interface if SIM
•doesn’t include specific folder.
MBIMCFG has been extended to allow the selection of both CID 1
• and CID 3.
Removed DCD glitch when module received an incoming data call. •
• Improvement on command AT+CMGL="ALL", it has been extended
to cover also the 5th AT instance that is available only in
SMSATRUN and TCPATRUN.
• #CMUXMODE=1 - CFUN=5 correctly managed on virtual channel
by DTR toggle.
• [ATT] SSL certificates update:
"GeoTrust Primary Certification Authority" and "GeoTrust Primary Certification Authority - G3" certificates installed on the module,
under <CDR-DVM-3953> AT&T requirement.
AT&T Changes in default: Default value of AT#ICMP now is 2. •
Improvement on AT#CSURV to avoid missing MCC/MNC in LTE
• scan response if the same cell is shared by two PLMNs.
• Reduce timing to configure GPIOs status during startup of the
system.
• DW Cloud: improvement to support Method execution request
parameters with var is a multiselect string.
• FIREWALL: improvement on storing the disable/enable setting in
NVM.
Improvement on-off procedure to make sure that 5 seconds on-off
• are always enough to power on the module after a FW upgrade
and in all other scenarios.
MBIM command DEVICE_CAPS reports the same version string as
• AT+CGMR.
I2C Clock Stretching support. •
4. DOCUMENT HISTORY
Revision Date Changes
0 2017-09-12 Delta SW 20.00.xx2 - 20.00.xx4
1 2018-07-06 Delta SW 20.00-xx4 - 20.00.xx5
] 6 1。