移印机说明书-英文版
华盛顿HP Officejet H470移动打印机系列说明书
Reliable and easy to useOutstanding valueThe small, sleek printing device that’s perfect for mobile professionals.Count on this rugged, durable printer to perform consistently day in and day out. We drop-tested the printer to ensure it can handle the rigors of daily travel and we’re confident that you’ll experience equally impressive results.Experience hassle-free printing. Print large jobs easily with the fold-up 50-sheet paper feeder. Receiveconvenient low-ink alerts and shop for supplies using HP SureSupply.7Improve efficiency and flexibility. The printer works with multiple operating systems—includingWindows®, Macintosh, Palm OS, and more. Plus, with a duty cycle of up to 500 pages a month, it’s perfectly calibrated to meet the needs of even the busiest mobile professional.Professional-quality printsGet the best solution for printing on the go. The HP Officejet H470 Mobile Printer series withoptional wireless capability 1 provides a complete mobile printing system.Get more done with the world’s fastest mobile printer.2 With print speeds up to 22 pages per minute (ppm) black-and-white and up to 18 ppm color,3 this printer is way ahead of the competition. Save ink and money—our specially formulated inks are designed for efficiency. Plus, this printer’sHP Vivera Ink cartridge prints more pages than the ink cartridges that support competing mobile printers.Print on the goProduce laser-quality black text, vivid color graphics,and business-quality photos. When you use HP Vivera Inks, you can feel confident that your black-and-white and color documents will last for decades when archived.8Easily print in cars, clients’ offices, or even airports, with optional Bluetooth 4 and WiFi adapters.5 Print from a variety of mobile devices—including your notebook PC, PDA, digital camera, phone, or memory card 6—using the printer’s USB port.1 Not included, sold separately.2Based on published manufacturer specifications of the highest rated speeds available for A4 mobile printers under $500 as of July 2007. Test methods vary. HP Officejet H470 Mobile Printer series fastest black speed based on HP 98 cartridge only. 3After first page; see /go/inkjetprinter for details. 4Supports HP bt500 Wireless Printer Adapter with Bluetooth Technology, included with HP Officejet H470wbt Mobile Printer. Adapteroptional (sold separately) with HP Officejet H470, and H470b models. Visit /support/bluetooth for a list of compatible devices. 5WiFi (802.11) adapter optional (sold separately) with HP Officejet H470, H470b, and H470wbt models. 6Memory card slots support Secure Digital and MultiMedia Card. 7Program features and availability may vary by country. For more information, visit /learn/suresupply . 8Based on paper industry predictions for acid-free papers; colorant stability data at room temperature based on similar systems tested as per ISO 11798 and ISO 18909.HP Officejet H470 Mobile Printer series1 Fold up 50-sheet feeder withtray extenderHP Officejet H470b Mobile Printer shown2 Simple control panel includesone-touch power, resume,and cancel buttons and LEDindicators3 Front door access toeasy-to-install print cartridges4 Automaticfold-outoutputdoor protects the printer whennot in use5 Long-lasting lithium-ion battery6 Built-in USB port lets youconnect PictBridge-enableddevices like your digitalcamera7 Built-in USB 2.0 ports enableseasy direct connections8 Wi-Fi profile switch lets youstore settings for threedifferent 802.11environments9 AC power connection10 Lock connector for securingthe printer with a cable lock(available for purchase via athird-party vendor)11 Card slot supportsSecure Digital andMultimediaCard memorycards12 Built-in USB 2.0 port acceptsHP 802.11 or HP Bluetoothprinter adapters13 Card holder lets you identifyyour printer with yourbusiness cardSeries at a glance12345 6 7 8 9 10 11 12 13H470 H470b H470wbt 50-sheet input tray √√√HP lithium-ion battery Optional √√Bluetooth adapter Optional Optional √Printer sleeve Optional Optional √Experience true mobile freedom with this compact performer.Easily print what, when, and where you want using the HP Officejet H470 Mobile Printer series with optionalWiFi and Bluetooth adapters. Conveniently print from your car—without a battery—using the optional 12 V Auto Power Adapter.9 Print directly from notebook computers, PDAs, cameras, and memory cards, using the printer’s USB port. The optional easy-to-recharge and easy-to-install HP lithium-ion battery stores enough power to print up to 480 pages per charge.Create a professional impression—the printer has been redesigned to be more stylish than ever. Because it’s so lightweight, you can easily carry it and print wherever you go.Print and share photos in a variety of sizes and add more colorful images to your creative and business projects. Print 4 by 6 inch borderless photos to share with friends andfamily.10 With HP, photo printing is simple and convenient.Optimize your mobile productivity with versatile accessories from HP.HP bt500 Bluetooth Wireless HP 802.11b/g Wireless Printer AdapterHP Lithium-ion Battery HP Battery ChargerHP Battery and Charger Kit Printer AdapterQ6273A—Print wirelessly from Bluetooth-enabled devices, such as your PDA or mobile phoneQ6274A—Print wirelessly from your computer or a wireless (802.11) networkC8263A—Take printing productivity with youCB011A—Charge your HPlithium-ion battery without the use of your mobile printerCB012A—Be prepared: this kit means that your printer is ready to go when you areHP 12 V Auto Power AdapterHP Ultra-slim AC Power AdapterHP Travel Holder for Black/Photo Print CartridgeHP Mobile Printer and Notebook CaseHP Mobile Printer SleeveC8257A—Print while traveling from your car or even an airplane C9279A—Get an additional or replacement AC power adapterCB006A—Keep your print cartridges safe when not in useQ6282A—Carry the printer and a notebook or just the printer in its dedicated caseQ6281A—Help protect yourmobile printer during transportNot included, sold separately.9 Using 4 by 6 HP photo papers with tab. 10Actual yields may vary based on images printed and other factors. For information on print cartridge yields, see /go/pageyield 11.HP Officejet H470 Mobile Printer seriesHP Officejet H470 Mobile Printer(CB026A) HP Officejet H470b Mobile Printer(CB027A) HP Officejet H470wbt MobilePrinter (CB028A)Technical specificationsPrint technology HP thermal inkjetPrint speed (letter)Black: up to 22 ppm; color: up to 18 ppm12Print resolution Black: up to 1200 by 1200-rendered dpi; color: up to 4800 optimized dpi color and 1200 input dpi;print resolution technology: HP PhotoREt III (HP PhotoREt IV with optional photo cartridge)Memory 32 MB RAMDuty cycle Up to 500 pages per monthPaperInputUp to 50 sheets; up to 5 envelopes Two-sided printing Manual (driver support provided)Custom sizes 3 by 4 in (76.2 by 101.6 mm) to 8.5 by14 in (215.9 by 355.6 mm)Standard sizes Imperial: Letter, legal, statement, executive, envelopes (No. 10, Monarch), cards (3 by 5 in, 4 by 6 in, 5 by 8 in),photo (5 by 7 in, 4 by 6 in); metric: A4, A5, A6, B5 (JIS), C6, DL, L, 2LWeightsPaper: 16 to 24 lb bond (64 to 90 g/m 2), envelopes: 20 to 55 lb bond (75 to 200 g/m 2),cards: up to 90 lb index (162 g/m 2)Types Paper (inkjet, photo, plain), cards (greeting, index), envelopes, labels, transparenciesConnectivityInterfaces 2 USB ports (1 hi-speed and 1 full speed), 1 PictBridge port, 1 Secure Digital/Multimedia Card slotLanguagesHP PCL 3 enhancedOperating systems Windows 2000; Windows XP® Professional x64; Windows Vista®; Mac OS X v10.3.9; Mac OS X v10.4 and later;Palm OS; Windows Mobile for Pocket PC; Linux (available from the Web)Network operating systems Windows 2000; Windows XP Professional x64; Certified for Windows Vista; Mac OS X v10.3.9, v10.4 and later; Dimensions (w by d by h) 13.4 by 6.45 by 3.25 in (340.21 by 163.8 by 80.5 mm) 13.4 by 7.28 by 3.25 in (340.21 by 184.8 by 80.5 mm)Weight (includes print cartridge) 4.5 lb (2.09 kg) 5lb (2.27 kg)What’s in the box HP Officejet H470 Mobile Printer series, HP 98 Black Print Cartridge, HP 95 Tri-Color Print Cartridge, Starter CD with printerdrivers, User documentation, AC adapter, power cord, USB cableAlso includesHP Lithium-ion Battery HP Lithium-ion Battery,HP bt500 Bluetooth WirelessPrinter Adapter, HP Mobile PrinterSleeveWarranty One-year limited hardware warranty backed by HP Customer Care, service and support; one-year technical phone supportEnvironmental ranges CertificationsIEC 950-compliant, safety UL listed, EU LVD and EN 60950 compliant, GS approved, certified by Canada CSA, Russia GOST, China CCC, Taiwan Safety Recommended temperature 59 to 86 degrees F (15 to 30 degrees C) Safety Storage temperature -40 to 158 degrees F (-40 to 70 degrees C) Recommended relative humidity 15 to 90 percentStorage relative humidity 20 to 90 percentEU (EMC Directive), USA (FCC Rules), Australia (C-Tick), New Zealand (MoC), Canada (DoC), China (CCC), Japan (VCCI registered), Korea (MIC certified), Taiwan (BSMI certified)Altitude 0 to 15,000 ft (0 to 4,600 m) EMCAcoustics Sound power Normal: 6.1 B(A) Bystander sound pressure Normal: 47 dB(A)Power specifications HP SureSupply enabled. To learn more, visit /learn/suresupplyRequired input voltage 90 to 132 V, 47 to 63 Hz180 to 264 V, 47 to 63 HzPower consumption Off: 0.4 watts Standby: 5 watts13Active: 24 watts Maximum: 40 wattsENERGY STAR qualified models, see/go/energystarAll figures given are approximate and represent values obtained when printing from a PC over USB. Exact speed varies with system configuration, software program and document complexity. 12 Power consumption varies with print job, the use of wireless connectivity and the charging of battery. Values given are nominal.13Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. ENERGY STAR and the ENERGY STAR mark are U.S. registered marks. Microsoft, Windows, and Windows XP are U.S. registered trademarks of Microsoft Corporation. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. Pentium is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Linux is a U.S. registered trademark of Linus Torvalds.© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.To learn more, visit 4AA1-5975ENUC, March 2008, Rev. 1.1。
JUNO-G 用户指南说明书
• PC—right-click the Juno-G drive and select “Eject.” • Mac—drag the Juno-G drive to the trash.
14 Burn the audio file onto a CD, or prepare it for a music player or uploading using your computer’s software.
1 On the JUNO-G, load your song. 2 Press the AUDIO TRACK button.
How Do I Get My Song Into My Computer?
3
“How Do I Get My Song Into My Computer?” continued
Bouncing the Song in the JUNO-G and Transferring the Mix Using USB
Important! The Juno-G ships with 4MB of RAM and storage. This allows you to record 20 seconds of stereo audio. To capture full songs—as you’ll do in the following steps—you’ll have to expand the Juno-G’s RAM as described in the JUNO-G Owner’s Manual.
B-572-manual
TEC热转印打印机B-570 系列使用手册警告！此为A级产品，在生活环境中，该产品可能会造成无线电干扰。
在这种情况下，可能需要用户对其干扰采取切实可行的措施。
注意：不可接触机器的运动部件。
当手指、珠宝饰物、衣服等进入运动部件后为减少发生的危险，请将开关拨到“OFF”位置以停止运动。
注意：1、本手册在没有经过东芝TEC公司的同意不准全部或部分进行复制。
2、本手册有可能不经通知而有所改动。
3、如果对本手册有任何问题，请联系当地的负责服务的代理商。
禁止 禁止禁止禁止 禁止拔下插头拔下插头( ( (提醒:下面的提醒将帮助你保证机器连续正常的运行●要避免机器处于下面的不利状态★温度超出规定 ★过度的震动注意下面的指示表示如果对机器进行不合适的与指示相反的操作时引起个人伤害或物件损坏的危险.不要拆卸接地线拔下插头目录1．介绍--------------------------------------------------------------------------------------------11.1注意事项-----------------------------------------------------------------------------11.2型号-----------------------------------------------------------------------------------11.3随机附件-----------------------------------------------------------------------------2 2．规格--------------------------------------------------------------------------------------------22.1选件-----------------------------------------------------------------------------------22.2打印机--------------------------------------------------------------------------------32.3打印纸--------------------------------------------------------------------------------42.4碳带-----------------------------------------------------------------------------------5 3．外观--------------------------------------------------------------------------------------------63.1前后视图-----------------------------------------------------------------------------63.2操作窗--------------------------------------------------------------------------------6 4．开关设置--------------------------------------------------------------------------------------7 5．安装打印机-----------------------------------------------------------------------------------9 6．安装介质 -----------------------------------------------------------------------------------10 7．安装碳带 -----------------------------------------------------------------------------------16 8．安装高速闪存卡（选件）---------------------------------------------------------------17 9．介质和碳带的使用和保存---------------------------------------------------------------18 10．一般维护-----------------------------------------------------------------------------------1910.1清洁--------------------------------------------------------------------------------1910.2机壳和面板-----------------------------------------------------------------------2010.3取出塞纸--------------------------------------------------------------------------2010.4阈值设置--------------------------------------------------------------------------22 11．故障排除-----------------------------------------------------------------------------------231.介绍感谢您选择了TEC生产的B-572系列热转印打印机。
打印机产品说明书英文版模板
打印机产品说明书英文版1M M A A N N U U A A L L B B O O O O K KA A33--L L K K33990000F F l l a a t t b b e e d d P P r r i i n n t t e e r rWebsite:Add:1st~ 2nd Floor, 4 Unit, Huangtian Industrial Park, Xixiang Avenue, Bao an District, Shenzhen City, Guangdong Province, China(Near by 107 State road)TEL： FAX:careful check to the power cord to ensure it is not dilapidated.d)with purpose of being convenient to move this flatbed inkjet printer, please have proper conservation to the all accessories & package materials to this flatbed inkjet printer.Note：1、in this manual we also call this Flatbed Inkjet Printer to Printer。
2、We call the all devices to system equipment such as to Printer, Computer, scanner etc。
3、The printing object should is called media。
4、The Print-head would be ink head。
Alarm：during conveyance & placement, please don’t make the upside down, and please don’t make it be pressed & fallen。
移印机操作规程
编制
审核
核准
4.1.2一定要等检数器显示“00000”后方可操作,否则程序容易弄错（开机过程约20秒）
4.2调试
4.2.1检数器正常状态下,按活动头前后2.2检数器正常状态下,按印头升降制检查印头升降是否正常,有无异常声发出.
4.3固位及试印
4.3.1（前提：装好刮刀、油辘、钢板、放适量油墨,用适当移胶头）被印产品基本位置确定后需固定.
4.3.2按自动键活动头前后移动和印头升降有步骤的运行,一个步骤为一次,同时产品也被印一次.
4.4关机步骤
4.4.1自动键也叫暂停键,脚掣器踩一下可以开也可以关.
4.4.2主机正面急停制按下可停止工作运行.
4.4.3将主机左侧的电源开关按下,关闭主电源.
5.注意事项
5.1在机器运行时间调节印头深度时要小心,不能把手伸入印头下降间距离中,以免夹伤.
有限公司
作业指导书
文件编号
WI-AS-013
版次
A0
页码
1/1
生效日期
移印机操作规程
1.目的
正确操作生产设备,使生产能安全、有效和顺利地进行.
2.适用范围
移印机
3.参考文件
<<移印机使用说明书>>
4.操作步骤
4.1开机步骤及正常显示。
4.1.1将主机左侧的电源开关按下，然后将主机正面急停制顺时针旋转30度为开.
5.2活动头前后移动不能在油盆内调油,以免油墨溅出和压伤手.
6.保养程序
6.1每月必须三次注黄油于黄油嘴,使活动头导向杆保持润滑.
6.2按公司设备管理要求每月三次需对该设备进行全面检查.
6.3压缩空气中水分要过滤干净,以免进入气筒而降低气筒使用寿命.
移印机设备操作说明书
1.12最后将移印物放在移印夹具上﹐方可进行印刷。
2.该机操作面板说明﹕
2.1 SINGLE﹕单色速度调整。
2.2 DOUBLE﹕双色速度调整。
2.3 SHUTTLE﹕往返。
4.4如要停机数日或印刷完的时候﹐最好清理一下油墨容器中的油墨。
4.5印字胶头应妥善保护以免损伤。
4.6调机前一定要先停机。
核准
审核
制作
日期
设备操作说明书
第1页共2页
设备名称
移印机
设备功能
印字
文件编号
设备型号
PM-368
厂商
互通
版本
B0
1.操作程序﹕
1.1将钢板放置在油盘内﹐将两颗螺丝锁紧﹐便可固定钢板位置。
1.2将油墨注入油盘内及搅拌﹐油墨深度不可少于钢板高度2mm。
1.3按要求安置刀片及油刮。
1.4根据印字要求将印胶垫安置在胶头座上。
3.2检查气压设定是否为要求标准。
3.3检查机内润滑及传动是否正常。
3.4保持机身清洁。
4.注意事项﹕
4.1该机电源为220V。
4.2每日停机下班时﹐应将气源及电源切断。
4.3如停机数小时或下班时﹐应将油刮架从刀盒上脱离出来﹐放在油墨容器中﹐推行至最前端﹐下次开机印刷前用稀释剂调校后﹐再将油刮架放回刀盒上即可印刷。
1.5将电源线插在电源插头上﹐打开空压机。
1.6将脚踏开关插头安装在移印机上。
1.7调整空压机输入移印机之气压在6-7kg/cm2﹐确保气压稳定。
1.8按下电源开关﹐表板红色指示灯亮。
均科印刷 set 印刷机паystem列表说明书
®Industrial Bar Code PrintersCL408e/CL412e PrinterSpare Parts ListTable of ContentsCL408e/CL412e Page Spare Parts ListFrame Assembly (3)Print Head Assembly (6)Ribbon Assembly (10)Base Cover Assembly (14)Main PCB Assembly (21)Interface Options (22)PCMCIA Memory Option (23)Cutter Assembly Option (24)Dispenser Assembly Options (26)Page 2SATO CL408e/CL412e Printer Spare Parts ListRev. AFrame AssemblyPage 3 Rev. A SATO CL408e/CL412e Printer Spare Parts ListFrame AssemblyCP I RETQO I TD YSMC N.OENT I EDOFARENME1N I G77P E2101A7DSCEAP3RNHA6E3221M WD4DCASNRP2AEH131E24M WD3AMREP ED I S1F140A8277ADSECP2ANHR65132E4M WDDCASARP2NHE2E6114D4M WDP YS21TA77701ADSECARP4NHD12E481M W4ATLEG1P EPD I U1A390717AP RLOBC1L710227GD I U(PS1P)EGN I R1110C717DSRACHEP1AEN4212M W12D43AFHD I UP TG1ES510E368CESRHM WG I T-P1T22H11143LOBCD I UP KG1EE3510717CRSEHM WG I T-P1T6811H23SOSRNT I P1CHSER17U107P B77P REAO2LLC1871057GD I UP)E(S1PN I RGC10119772EAOC1LLP R20774CESRHM WG I T-P1TH211823P TBSOP1275207UM TNH1TEX2231274Page 4SATO CL408e/CL412e Printer Spare Parts ListRev. AFrame Assembly.ONMET I EDOC NO I TP I RCSED YTQ 422241AN REHSAWN I ALP1 52224BN REHSAWGN I RPS1 6204771EP ELDNAHHCTAL1 7201772CP)ELDNAHHCTAL(GN I RPS1 8201772BP RALLOC1 92124144DM WERCSDAEHNAP1 0312834DM WERCSDAEHNAP1 1302777RP)E84LC(NETALP1 2308771AP)B(PMALC1 3312634DM WERCSDAEHNAP2 43467218TP)E84LC(TLEBGN IM I T1 53023771AP RETTUCFFO-RAET1 6308771EP ROTCETORPRETTUC2 7312834DM WERCSDAEHNAP2 8308771HR WSNEPODAEH1 93122123DM WERCSDAEHNAP2 0409776EP ED I UGREPAP1 142231AN REHSAWN I ALP15401777RPBUSRELLORNETALP)e214LC(16446318TP)e214LC(TLEBGN IM I T1Page 5 Rev. A SATO CL408e/CL412e Printer Spare Parts ListRev. APage 6SATO CL408e/CL412e Printer Spare Parts ListPrint Head AssemblyPage 7Rev. ASATO CL408e/CL412e Printer Spare Parts ListPrint Head AssemblyPrint Head AssemblyCP I RETQO I TD YSMC N.OENT I EDORMAFEP EH1DAA210717DSCAP2ANHER12E214DM W4RACBEKH1ADP T5E72730A1ONDBAP1JATEB I R(L19U7407P)TS1ADCASNRP2AHEE251M W64D3TPASLTA1DJU723E7P)A(60A1ASEDACP1NHR623714EM WDBBAURACH1EDS18K8077EAP T1DSCARP2ANHE4291E6M WD3PLTTAA1EDJSU6P)B(107A17AP RLOBC1L2731107ADSECAP1RNH21112E4M WAADDH(AAJS1HFTE710U773SP)TBN I RN GPS-E2DNA10342AP RLC12OLB105177ADSCEP1EANHR1426114DM W4PTLSADTA1JU710P E1571A7COLTLA1DJUSL110A822P R7SDCARNEP1HEA829M W114D3SHEAN I AN RP1LWA21224RDSCAP1ANHE38211E2DM W4P GCN I RP7S121207DAPREEAHS1SFTH(76203S7URP)EBPage 8SATO CL408e/CL412e Printer Spare Parts ListRev. APrint Head AssemblyCP I RSD YQO I TETM.OC NENT I EODSSUEBEREH2RADPRP T4A42071C1EKEENTO I SH2NEAD202P N I P541E7EAH(DPS2N I RGP)206C2717RELUPAP2RESS120T47P EA7N GDN I RS-E4APN83206P REAOC4LL2207937EP RLOR4BL313077UPPS(HS1RAFTO330P)T1B77SDRACNP2AEEH6231M W2D43ADHNALL1TCHP E630377R722GN N I P1413032SERRUSAEH1EDP77S7307P TE5RDC(LA4TP1N I RHE8313AG)e56HSDEACNP1AHER62317M WD43SSN I RAP,YBHC1ALET57187301AER DHS,YPSN I RLC1HABEAT5319E727AR DH1P GVN I HB19SU174034C(D4ALN I RP11THEH714A327G)ePage 9 Rev. A SATO CL408e/CL412e Printer Spare Parts ListRibbon AssemblyPage 10SATO CL408e/CL412e Printer Spare Parts ListRev. ARibbon AssemblyRibbon AssemblySP I RETQO I TD YCMC N.OENODT I EBONB I R2P SBOS1E31047AP RLOEC4L721202P GAN I RS84P93069CESHM WG I T-P8TR2H4153DRMSYL I O2ELES2T15032P LATP CS I D26A8460CN I RS21PP G70713ERCPOS2LTOP21L8037AP RETRSCJEA2DUS90P W13B57DSRACP5ENHEA212M W3A3ASEDACF1LTHM W8R11223AE1UM TTEH1XN2121253ADSCEP1RANHE611323M WD4S(HNAB I R2FBO41111P)T77BLODEHRLP2ATBE210O257P SS4EDCASNRP1AHEM W8211E16A3SDRACNP1AHEE527M W212A3M TTUH11XNE123825RECG I T-P4M WHTS12H9611256N I N I L2P G8A203CP GS17PN I R14202ATP ELG2D I UEPA202173PLTAH2P EOLD203237ARibbon Assembly.O N M E T I E D O C NO I T P I R C S E D Y T Q 420011861E P )B (E T A L P E D I U G 1520010277E P )A (E T A L P C S I D 1620010276E P R E V O C E T A L P C S I D 1721260034D M W E R C S D A E H N A P 3820050771A P T E K C A RB R O S N E S 1921260034D M W E RC SD AE H N A P 1031260030A M WE R C S D A E H N A P 2130040471H R )4N E S (R O S N E S N O B B I R 1430062771A P E M A RF N O B B I R 1531260034D M W E R C S D A E H N A P 4630071771A P E T A L P T S U J D A 2731260034D M W E R C S D A E H N A P 4831201044D M W E R C S D A E H N A P 2930802111T P R E T R O P P U S L L A B 4040040271R P )05(Y E L L U P 1140300600D N GN I R P A N S -E 124A 105001G J E I T E R I W N O T T U B H S U P 1344600718T P T L E B G N I M I T 1440090371R P S S O B N O B B I R 2540010771R P YE L L U P 1640020470C P )K C A B (G N I R P S 1741280030H M W E R C S T H G I T -P 1840031772A P T E K C A R B G N I R P S 1941260034D M WE R C S D A E H N A P 2Base Cover AssemblyBase Cover AssemblyBase Cover Assembly.O N M E T I E D O C NO I T P I R C S E D Y T Q 10050773R P E M A R F E S A B 120010866T P T O O F R E B B U R 430051770Z P E M A R F R E T N E C 141201044D M W E R C S D A E H N A P 550001771A P DI L 161260034D M W E R C S D A E H N A P 470020771E P T E K C A R B R E L L O R 180010773E P R E L L O R 190010770B P T S O P 1010010778E P RA E G 1110300400D N GN I R P A N S -E 1211201044D M W E R C S D A E H N A P 1310040770B P TS O P 1410081473A P TE K C A R B N O I S N E T 1510090470B P )R E L L O R N O I S N E T (TF A H S 1610010470C P )N O I S N E T (G N I R P S 1710010273E P R E L L O R N O I S N E T 1811260034D M W E R C S D A EH N A P 1912241034D M W E R C S D A E H N A P 1022250031T M TU N X E H 1120300400D N G N I R P A N S -E 3220045771A P T E K C A R B B C P 1321260034D M W E R C S D A E H N A P 2420001770Z P RE V O C R A E R 1521260034D M WE R C S D A E H N A P 6621001776E P R E V O C D R A C Y R O M E M 17210002A 5B P W E R C S D A E H N A P 2822083863H P DI L 1920010259T P T E V I R N O L Y N 2030012771A P ET A L P E D I U G 1131260034D M W E R C S D A E H N A P 4230053771A P T E K C A R B D N I W N U 1330030254A P G N I R P S R E P P O T S 1430030271E P R E P P O T S L E B A L 1531280030H M W E R C S T H G I T -P 1632200301A N RE H S A W N I A L P 1Base Cover Assembly.O N M E T I E D O C NO I T P I R C S E D Y T Q 731260034D M W E R C S D A E H N A P 4830020772A P T E K C A R B R O T O M 1931201044D M WE R C S D A E H N A P 2040010771L P )e 804L C (Y E L L U P R O T O M 1144250041J M W E R C S T N I O P -W 2240030771H R R O T O M G N I P P E T S 1341221043D M W E R C S D A E H N A P 4440041771A P TU N E T A L P 1540020776E P R E V O C R O T C E N N O C 1641260034D M W E R C S D A E H N A P 1740040770Z P R E V O C T N O R F 1840010773T P EG N I H 2941280031H M W E R C S T H G I T -P 4052260031A M W E R C S D A E H T A L F 4150040776E P SN E L 1350030776E P N O T T U B H C T I W S 1451280030H M WE R C S T H G I T -P 2550031770Z P )e 804L C (E T A L P O G O L 1650050431R P H S U R B C I T A T S -I T N A 1750003771A P T E K C A R B H C T A L 1851280030H M W E R C S T H G I T -P 2950010773R P H R R E V O C 1060010272H P W O D N I W 1162250031T M TU N X E H 2262200301A N R E H S A W N I A L P 2461260034D M W E R C S D A E H N A P 2760010771H P HL R E V O C 1861260034D M WE R C S D A E H N A P 496A 136005A K )V 511(T I N U Y L P P U S R E W O P 1171280034D M W E R C S D A E H N A P 3270071771H R E L B A C 1W O P 1370060771H R E L B A C 2W O P 1471051771J R B C P Y A L P S I D 1670050771H R T E S E L B A C B K 1770060776E P RO T C E T O R P B K 1Base Cover AssemblyCP I RSTQO I TD YEMNC NE.ODOT I EADCESNP3ARH46271E8DM W3ROTPEBCC1ALET70977P R7EO6LLESEUYM1OTTORPL7C(8073478RP)eLLEOG1P RD I UER7480R771DSRACHEP2AEN2481M W12D32RSOEP T I LS1NS180A95772CESRHM WG I T-P1T6281H83V1.35F1USE2(5218AH)A37D1SDEACNP2AHER628M W81D43ASWHP2ELN I AN R829231ALUEYC(PM1LOTORL27904711P)e2L1ELYSLEM1OTTOPRUL117C(27901724RP)eT4C(ALGL1OOPLE419037127P)eZNOURSTVC1BOERFC(773557904RL8P)eNTBOUSEC1C(OVFRR263906L7174P)eR7V I REDM1EC IROP R906971A2AMJ PLCGC1K59A8151EDOC NO I TP I RCSED21771JR ABCPN I AM2777JR BCPYROMEM1379CP GN I RPS869CP GN I RPS12634DM WERCSDAEHNAP3777JRBM4(BCPYROMEM)NO I TPOEDARGPUInterface OptionsSECTQO I TD YP I RC NN.OEMT I EODEM WRS2DC236123ARLLLAE2E I1N IE1-E48P4LT207C4RW EAFCEREFTEAS1A I RLN IC5W E431CL4EFTRSCU1BN IA64044CLW EETTNN IE1ETHERS158R5FAC11EERTFT/XAC1XN I136611ESCP I RO I TCE.ODC NSONEMDT I EEMMROCYPMA I C7110O7P4JO I TR N NOTE: PCMCIA Memory Card not included with the option.Cutter Assembly OptionCutter Assembly Option.O N M E T I E D O C NO I T P I R C S E D Y T Q 10002777R P TE S R E T T U C 121260034D M W E R C S D A E H N A P 230070772A P T E K C A R B R E T T U C 151280030H M W E R C S T H G I T -P 260001770B P TS O P 171260034D M W E R C S D A E H N A P 180063771J R T E S B C P R E T T U C 191260034D M W E R C S D A E H N A P 2010002771H R E L B A C R E T T U C 1210001771E P RA L L O C 1311280034D M W E R C S D A E H N A P 1410050772A P R E V O C E LB AC 1511280030H M W E R C S T H G I T -P 1710060779V P T E K S A G I M E 1810000770G P ET A L P G F 1Dispenser Assembly OptionDispenser Assembly OptionDispenser Assembly OptionCP I RETQO I TD YSMNC NE.OT I EDOERFSPAS I D1EN741M710AP E1RBAERLR1OCLA77K71P TE20DSCANRP2AHEE231M W64D3ERLSOLS I D1PENP R1E7407RUPSPAOB2LLR6501112TTEP RBEACS I D1KPENSR60E797EP T1RP RE1AG172807N I RN GPNS-E1AD9034CRESM WG I T-P2HT8211H3URRSEELP1RSO22L11051EP RRUESRSFS1HATP(22R107P)EB7N I RN GPNDS-E2A33104PENS I D(S1HAFTS94P)E107B7N I RN GPNS-E2AD10352NOSREBEPS I D2NSESR710A6531CKEEP TRECG I T-P2M WHTS5117H822CABLS I D1PENSE110R E2871H7RBAHCAKL1TCP T2E109471A7CRSEG I T-P1M WHT3221H8DSCAP2RANHEM W82E1214D3P TTEM19ANG202689CESRHM WG I T-P1TH6232113CRSEHM WG I T-S2T4221H834SHEAP2LN RN I AW2225A31EWN IR(S1DHAFTP)20B8677P EODRER1WN IC20E17477BDON IR1SEWP S2208E747SDRACAEP1NHE1221M W92D43N GDN I RNAPS-E1 3036LP EDA1H1NE153072RAMFR1EWN IDA302P E1477DACESARP3NHE623313M WD4PTDAWP ER1EN IL304A91377DACRP4EANHES625M W31D43P YELUEP1L3064778Dispenser Assembly Option.O N M E T I E D O C NO I T P I R C S E D Y T Q 730010770A P E G N A L F 1830010774J P G N I C A F 2930010777E P EG N A L F 1040040771C P )D N I W E R (G N I R P S 1140080772E P )G N I R P S (R A L L O C 1240802111T P R E T R O P P U S L L A B 2341201044D M W E R C S D A E H N A P 1444605518T P TL E B G N I M I T 1640013777R P T I N U B U S E S N E P S I D 1740003777R P T I N U B U S D N I W E R 1840021770B P )R E S N E P S I D (T F A H S 1940074771A P E T A L P E S N E P S I D 1050010772A P T E K C A R B R E P P O T S 1150060253E P R E L L O R E S N E P S I D 4250300200D N GN I R P A N S -E 2350011771E P )T S U J D A N O B B I R (R E C A P S 2451281030A M WE R C S D A E H N A P 2。
Panduit PXE 系列移动打印机说明书
Impresoras MóvilesImprime tu camino Conexión con nuestras aplicaciones móviles:EASY-MARK iLabel App EASY-MARK Network AppOPCIÓN 1:Compra 10 cartuchos y recibe gratis una de las siguientes impresora MP75 – MP100 – MP200MP75MP100MP200•Hasta 0.75 de anchode etiquetas continuas.•Ligera y compacta •Cortador manual.•Hasta 1.0 de ancho de etiquetas continuas.•Hasta 1.0 de ancho de etiquetas continuas.•Conectividad USB y Bluetooth.•Cortador automático.•Cortador automático con corte completo y medio.•Velocidad de impresión de 1.2 segundos.•Conectividad USB.hacia el ahorro¡Compra cartuchos y obt én una impresora de la serie PXE gratis!Haz tu trabajo de manera inteligente, más rápida y más fácil con las impresoras móviles de la serie PXE. Estas impresoras de identificación avanzadas combinan el rendimiento líder en la industria de Panduit y la durabilidad probada en el campo con la tecnología de impresión de clase mundial de Epson.MP300 incluye estuche rígido, paquete de baterías recargables, accesorios magnéticos, cable USB y adaptador de corriente.Impresoras MóvilesImprime tu caminohacia el ahorroPROCESO:COMPRAProductos que califican (los cartuchos comprados deben ser del inventario del distribuidor en una sola factura)La impresora se enviará a la dirección proporcionada.1. Formulario de reclamo completo: asegúrese de marcar el producto gratuito deseado en la casilla correspondiente.2. Envíe por correo electrónico el formulario de reclamo y la factura a Mé********************************SOLICITUD EnvioFORMULARIOFecha:Nombre del contacto:Compañia (Usuario final):Dirección:Ciudad:C.P.:Número de teléfono:Email:Nombre del distribuidor:Representante de ventas Panduit:SELECCIONA LA IMPRESORA MÓVIL PXE DESEADAMP300。
Panduit MP100 MP300移动标签打印机说明书
NEW! MP100 and MP300Mobile Printers Combining best in class print technology with industry leading labeling and software capabilities MP100PORTABLE LABEL PRINTER PARTNERNEW!MP100 and MP300Mobile PrintersCombining best in class print technologywith industry leading labeling and software capabilitiesMP1002Representative offering only, visit for complete listing of products.MP300MP100Windows is a registered trademark of Microsoft Corp. in the United States and/or other countries.EMPLUSProduct FeaturesPrinters and AccessoriesEasy-Mark ™ Network Easily create labels for network components and cabling that are ANSI/TIA-606 compliantConnect to Fluke LinkWare Live3visit • Fast-loading Label Cassette includes both label material and ribbon to make changing labels easy• Innovative label design allows labels to rotate for visibility from any angle, and for repositioning on the wire/cable to align legends and improve aesthetics• Labels can be easily installed on existing terminated wires and assemblies without disconnecting the wires/cablesTurn-Tell ®Label Cassettes• Fast-loading Label Cassette includes both label material and ribbon tomake changing labels easy• Self-laminating adhesive labels for wire/cable identification include a white print-on area and clear overlaminateDie-Cut Self Laminating Label CassettesPolymer Film (V1)-40°F to 200°F (-40°C to 93°C)Self-Laminating Vinyl (VA)-40°F to 150°F (-40°C to 66°C)4Representative offering only, visit for complete listing of products.Continuous Self-Laminating Labels• Fast-loading Label Cassette includes both label material and ribbon to make changing labels easy• Self-laminating adhesive labels for wire/cable identification include a whiteprint-on area and clear overlaminateContinuous Heat Shrink Labels• Fast-loading Label Cassette includes both label material and ribbon to make changing labels easy•Shrink ratio 3:1• Non-adhesive flattened heat shrinkable polyolefin for wire/cableidentification-40°C to 66°C (-40°F to 150°F)-40°C to 125°C (-40°F to 257°F)Self-Laminating Vinyl (VA)Heat Shrinkable Polyolefin (H1, H2)5visit • Fast-loading Label Cassette includes both label material and ribbon to make changing labels easy• Print custom pipe markers, voltage markers, signs, bin markers, and network identification labels on demand• For flat label applications onlyContinuous Tape CassettesCompetitive comparison based on published specifications.Epson Print TechnologyEpson is a global technology leader dedicated to becoming indispensable to society by connecting people, things and information with its efficient, compact and precision technologies.Combined with Panduit’s Labeling and Software CapabilitiesPanduit creates leading-edge labeling solutions for electrical and network environments, from the data center to the telecom room, from the jobsite to the plant floor, Panduit has you covered.Results in Best-in-Class PerformancePanduit has entered into a strategic partnership with Seiko Epson Corporation to jointly develop printer and labels for the industrial, construction and network infrastructure markets. The results of the partnership are printers with best-in-class print quality, speed, capabilities and label selection. The MP100 & MP300 printers and labels are the first of many products that will be jointly developed through this partnership.WORLDWIDE SUBSIDIARIES AND SALES OFFICESFor a copy of Panduit product warranties, log on to /warrantyPANDUIT CANADA Markham, Ontario ******************Phone: 800.777.3300PANDUIT EUROPE LTD.London, UK*******************Phone: 44.20.8601.7200PANDUIT SINGAPORE PTE. LTD.Republic of Singapore *****************Phone: 65.6305.7575PANDUIT JAPAN Tokyo, Japan********************Phone: 81.3.6863.6000PANDUIT LATIN AMERICA Guadalajara, Mexico *****************Phone: 52.33.3777.6000PANDUIT AUSTRALIA PTY. LTD.Victoria, Australia ******************Phone: 61.3.9794.9020©2020 Panduit Corp.ALL RIGHTS RESERVED.IDSG01--SA-ENG10/2020For more informationVisit us at ContactCustomerServicebyemail:**************or by phone: 800.777.3300。
RAISE3D df1系列3d打印机用户手册说明书
DF1（Digital Former 1）系列3D打印机用户手册目录1、产品介绍 (5)1.1产品简介 (5)1.2产品配件清单 (5)1.3树脂槽介绍 (6)1.4产品规格参数表 (6)2.操作软件介绍 (7)2.1软件安装 (7)2.2软件介绍 (8)2.2.1界面 (8)2.2.2功能 (8)3. 触控屏介绍 (13)3.1打印（Print）界面 (13)3.1.1无打印任务状态 (13)3.1.2打印进行中状态 (13)3.2打印历史界面 (14)3.3设置界面 (14)3.3.1连接部分 (14)3.3.2常规部分 (15)4.打印操作流程 (16)4.1使用前准备工作 (16)4.1.1放置要求 (16)4.1.2防尘玻璃安装 (16)4.1.3树脂槽安装 (17)4.1.4打印平台安装 (17)4.1.5 通电 (17)4.2选择打印方式 (18)4.2.1 U盘打印 (18)4.2.2有线连接 (18)4.2.3连接wifi (19)4.2.4使用设备自带热点 (19)4.3软件操作 (20)4.3.1安装软件 (20)4.3.2模型加载导入 (20)4.3.3模型删除 (21)4.3.4页面视图调整 (21)4.3.5模型翻转 (21)4.3.6模型大小缩放 (22)4.3.8手动调节支撑参数 (24)5.模型后处理 (27)5.1移除打印平台 (27)5.2取下模型 (27)5.3清洗模型 (27)5.4去除支撑 (28)5.5模型后固化 (28)6.设备日常维护 (30)6.1清洗树脂槽 (30)6.2清理打印平台 (30)6.3清洁机器的灰尘及污渍 (30)7.安全使用注意事项 (31)7.1安全说明 (31)7.1.1监督 (31)7.1.2光敏树脂 (31)7.1.3 酒精/异丙醇 (31)7.2使用注意事项 (31)7.2.1使用前准备 (31)7.2.2打印完后处理注意事项 (32)8.常见问题及解决办法 (33)8.1打印平台粘不上模型 (33)8.2 打印模型不完整 (33)8.3打印时电源断开 (34)8.4打印模型模糊 (34)8.5 DFware软件中找不到打印机 (34)8.6 无法在DFware软件中添加模型或软件崩溃 (34)8.7 U盘连接打印机没反应 (35)8.8模型数据有问题 (35)1、产品介绍1.1产品简介1.2产品配件清单升降模组触摸显示屏保护罩树脂槽磁夹旋钮 打印平台1.3树脂槽介绍树脂槽由打印料槽框架、离型膜、锁紧圈组成；1.4产品规格参数表2.操作软件介绍2.1软件安装电脑配置要求：Windows 10系统，64位，独显OpenGL 3.3，8G内存（推荐16 GB内存）；关闭电脑防火墙和杀毒软件，双击应用程序进行安装；2.2软件介绍2.2.1界面软件界面如下图所示：该界面由：工具栏、模型编辑快捷键、打印模拟平台、视图模块、打印参数设置、打印信息等部分组成2.2.2功能1.左上角工具栏功能如下：2.打印参数设置点击快捷按钮将弹出如下窗口：说明：①设备型号选择：该系列设备有两个型号，用户可按照设备显示序列号选择对应型号；②打印材料选择：用户需对应选择打印机实际打印使用的材料编号；③打印厚度选择：本系列设备共有三个打印层厚可供选择，数值越小，z向精度越高，但是打印时间越长。
移印机操作使用说明书
移印机（安全）操作指引一、宗旨为使生产部设备健康有效运行，提高设备使用寿命，降低因人为因数造成的设备故障，使其能有效的为生产服务，以提高生产效益，特制定本规范二、注意事项1、生产部的设备操作人员必须经过考核培训后才能操作该设备，2、任何人管理人员不能随意调动未经培训的人员操作该设备，3、设备操作员有责任和义务对设备进行日常维护和点检4、当设备在运行中突然断电时，胶头和刮刀可能会发生滑移，在操作时要注意安全，谨防夹伤三、设备各部位图示说明1、控制面板2、胶头3、刮刀机构4、工作台面5.气源处理二联件四、操作步骤1、将蚀刻板（钢板）放入油盘，用钢板螺丝锁平锁好在油盘中间，加入适量油墨在选择移印钢板时，必须核对生产单，明确知道要丝印什么内容，丝印在什么地方2、装好刮刀和油辊，保证其能正常工作，刮刀无缺口3、接通电源，连接气源，调减压阀使压力在0.3-0.5Mpa（3bar-5bar）4、按面板上的STOP/SLIDE键，使刮刀油辊前后移动进行上墨和刮墨动作，调节起移动速度（不要太快），并观察刮油情况，如有刮不干净现象，请检查以下内容(1)、刮刀不平，刮刀有缺口如有，请纠正或更换(2)、钢板不平，如有，请重新安装(3)、油墨太稀或太稠，5、装上胶头，按SLIDE键，前后移动数次后使其停止后，按STAMP，胶头下压向钢板试沾墨一次，调好胶头的上下移动速度，根据沾墨情况调胶头的前后左右位置，旋转角度，以及胶头压向钢板的行程，在这里需要特殊说明的是，旋转旋钮最初应固定在较高位置，之后慢慢往下调6、将产品夹具固定在工作台面上，7、接4，胶头沾墨后，按STOP/SLIDE使其停前，按STAMP，胶头下压向产品试印一次，根据试印情况，调节胶头压向产品行程及夹具的位置和角度。
8、试印数次后，根据需要调节延迟时间的长短，其调节方法如下：当按了SLIDE后，机器运作，这时可调节胶头在前和后的两个位置上停顿的延迟时间，调节时不必停机，可直接按SLOW（每按一次满0、5秒），或FAST键（每按一次快0、5秒），范围为0—4.5秒。
易维斯Zenius打印机说明书
combinable encoding functions: magnetic EASE OF USE• W ith the Evolis Premium Suite ® software, you can receive notifications and easily control the printer from your computer.• E volis High Trust ® ribbons are easy to install and automatically recognized and The Zenius printer is designed for single sided printing of a very large variety of plastic cards. Zenius generates color or monochrome cards, individually or in small runs, with top quality results. Zenius is a user-friendly, compact and cost-effective solution for delivering your personalized cards.ZENIUSTHE COMPACT AND AGILEMAIN FEATURES / Full technical specifications on MANUAL OR AUTOMATIC CARD FEEDERGENERAL FEATURES• Direct-to-card dye-sublimation/Resin thermal transfer • Single-sided printing, edge-to-edge00 dpi print head (11.8 dots/mm)• 16 million colors• 16 MB memory (RAM), 32 MB for the Expert version olors available: fire red & grey brownPRINTING PERFORMANCESolor (YMCKO): 120 - 150 cards/hour1• Monochrome: 400 - 500 cards/hourINTERFACESSB (1.0, 1.1, 2.0, 3.0), cable suppliedthernet TCP-IP 10BaseT, 100BaseT (Traffic Led) on the Expert versionCARD MANAGEMENT AND SPECIFICATIONS utomatic or manual feedingeeder capacity: 50 cards (0.76 mm – 30 mil)utput hopper capacity: 20 cards (0.76 mm – 30 mil)ard thickness: 0.25 to 0.76 mm (10 to 30 mil), gaugeard types: PVC cards, composite PVC cards, PET cards, , special varnished cards1ADDITIONAL ENCODING MODULES• A vailable modules on the Expert version:- Magnetic stripe encoder ISO 7811 HiCo/LoCo, JIS2 - Smart contact station ISO 7816-2- Contact smart card encoder - PC/SC, EMV 2000-1 - C ontactless smart card encoder - ISO 14443A, B,ISO15693, MIFARE, DESFire, HID iCLASS- Other specific encoders upon request• I nternal USB ports• O ptions can be combined• F actory-installed or installed on siteSAFETY• S upport for Kensington® security lock• D ata encryption for magnetic encoding DISPLAY•P rinter LEDs• G raphical notifications from the printerempty/low level ribbon and card alerts, etc. EVOLIS HIGH TRUST® RIBBONSTo maximize the quality and durability of printed cards, the lifespan of the print head and the overall printer reliability, use Evolis High Trust® ribbons.• A utomatic identification and settingEasy handling, automatic ribbon recognition and setup W eight: 3.3 kg (3.64 lbs)315 mm (12.4’’)205 mm (8.07’’)。
Hickory Manual 9 99说明书
Hickory RotisseriesUSAInstallation ManualOwner's Operating Manual Models: N/3ES thru N/9EN/3ES Shown(Right Hand Unit)Table of Contents1.0 Installation Instructions31.1General Information31.2Machine Drawings and Dimensions41.3Machine Dimensions61.4Maintenance, Response to Technical Problems, and Solutions71.5Electrical Diagram71.6Parts List81.7Parts List with Diagrams82.0Operating Instructions2.1Start up102.2Shut down102.3Working with the Rotisserie112.4Cooking Times122.5Daily Cleaning122.6Important Information131.0 Installation Instructionsa.When installing these units, it is important to comply with the most recentlyestablished rules and regulations as deemed pertinent by the local and nationalelectrical, ventilation, sanitation, and fire codes. These units are classifiedby Underwriters Laboratories, Inc.b.The room where the units are being installed must be ventilated in accordance tothe valid codes and regulations.c.The units are to be installed securely and horizontally. The units may beinstalled on combustible floors. The units may be installed on adjustable legs or oncasters (wheels).d.The minimum clearance to the rear or side walls must be 6 inches. The minimumclearance between the spit handle side of the machine and the side wall should be24 inches for a sliding door and 10 inches for a hinged door. It is also important toinsure that the bottom of the units is kept clear so that proper ventilation or airexchange can occur.e.Uunits will be sent to the operator already set up for the particulartype of electrical requirements available at their location.1.1General InformationThe Operating Instructions are to be given to the operator of the rotisserie. All unitoperators are to be familiar with the functions of the rotisserie.The Operating Instructions should be kept in a location close to the rotisserie. It should be easily recognizeable and easily accessible.It is recommended that a repair and maintenance contract be signed with themanufacturer's agent, distributor, or service agency.WARNING!This unit must be installed and connected in accordance to the latest regulations and can only be operated in conjunction with forced ventilation or exhaust hood.This unit has been designed for professional use onlyand may only be installed or repaired by licensed service agencies!Before installing or using this equipment, read these instructions!1.2Machine Drawings and Dimensions1.3Main dimensions in inches3ES3E5E7E9EHeight [A]48-1/460-1/474-1/474-1/488-1/4Width [B]34-1/438-1/438-1/438-1/438-1/4Depth [C]21-3/421-3/421-3/421-3/421-3/41.4Maintenance, response to technical problems, reasons for problems and solutionsShould a technical problem arise for any reason, shut off the machine and call for technical service.1.5Electrical Diagram - All Models1.6Parts List for N / 3ES thru N / 9E with DiagramsItem Qty.Description Material Length Size Manufacturer 1061Contact Section 824 (terminal)Buchanan 1071Contact Section 830 (end-piece)Buchanan 1102Caster w/ brake Nylon Hickory 1112Caster w/o brake Nylon Hickory 1161Sliding Door SS Hickory 118T1Door Slide Assembly Long, Top SS Hickory 118B1Door Slide Assembly Long, Bottom SS Hickory 1201Drip Pan SS Hickory 1211Drip Pan Plug Brass Hickory 1221Drip Pan Receptacle Brass Hickory 1266Element U-Shape 240 V olts, 2500 Watts Hickory 1276Element Holder Large Hickory 12912Element Porcelain Insulator Hickory 1311Fiber Motor Worm Gear Fiber Hickory 1432Glass Tempered, 457 x 1219 mm Hickory 144T1Glass Track, Top SS Hickory 144B1Glass Track, Bottom SS Hickory 1452Glass Trolley, Regular Alum.Hickory 1472Handle Plastic Hickory 1481Lamp Cover Regular Hickory 1501Lamp Par, 240 V Hickory 1521Lamp Socket, V ossloh-Schwabe Ceramic Hickory 1551Motor, 1/3 HP - 240V Hickory 1571Motor Worm Steel SS Hickory 158 5 or 7Oil Lite Bushing Brass Hickory 1593Pillow Block Bearing 5/8"SS Hickory 1671Rack Grill Single Unit Hickory 1711Reflector Bottom Single Electric SS Hickory 1723Reflector Panel Electric SS Hickory 1821Shaft 5/8"SS Hickory 1849Shaft Worm Nylon Hickory 2011Spit Lock, N / 5SS Hickory 2021Spit Lock, N / 7SS Hickory 210I1Spit Plate, N / 5 Interior SS Hickory 210E1Spit Plate, N / 5 Exterior SS Hickory 211I1Spit Plate, N / 7 Interior SS Hickory 211E1Spit Plate, N / 7 Exterior SS Hickory 6Infinity Switches w/ Knobs Hickory 6Indicator Lights Hickory1.6Parts List for N/3ES thru N/9E with Diagrams (Contd.)Item Qty.Description Material Length Size Manufacturer 189 5 or 7Spit Regular Complete (with screws)SS Hickory 1792/spit Roll Pin 1/8" Stainless SS Hickory 190 5 or 7Spit Regular, without collar SS Hickory 191 5 or 7Spit Collar SS Hickory 192 5 or 7Spit Gear Nylon Hickory 193 5 or 7Spit Handle, 8" Regular Nylon Hickory 1855/Spit Skewer Double SS Hickory 1865/Spit Skewer Single SS Hickory 2191/Acc.Thumb Screw Steel Hickory*All components are inventories and sold through Hickory Industries and their distributors and dealers.2Operating Instructions2.1Start Up1.Switch the exhaust hood to on.2.Switch on electrical element.3.Repeat the procedure for the other elements.4.Allow the unit to pre-heat for about 15 minutes.5.When ready to load the spits with product, turn the light and the motorswitches to the on position.2.2Shut Down1.Switch of all electrical elements.2.After all of the loaded spits have been removed, turn the motor and lights off.3.Turn off the exhaust hood.WARNING!Do not clean the machine or glass while these are hot! Everythingshould be cooled down before cleaning.2.3Working with the RotisserieGrilling TemperatureThe desired temperature in the rotisserie can only be set by turning elements on or off.Having all elements "on" is for the high setting and represents about 540°F. The grillingtemperature can be reduced by turning every other element off.As a general rule, the higher the grilling temperature, the shorter the cooking time.However, when working with the Old Hickory rotisserie, one must consider that thetemperatures will vary from top to bottom. The top of the unit will have highertemperatures due to the natural convection. The cooking temperatures indicated aboverefer to the top section of the machine. For this reason, the product on the top spits willbe cooked faster than the product on the lower spits.This factor allows for continuous cooking. As the top spits are ready, they should beremoved. The spits directly below should then be moved up one spit position, thus freeing a spit position at the bottom of the unit. This bottom position can then be loaded with fresh,raw product. By loading raw product to the bottom, there is no danger of crosscontamination.WARNING:The only way to be sure that the product is completely cooked is bytaking the internal temperatures. For example, with poultry, theinternal temperature must be at least 185°F at the inner side of the thigh.For example, when preparing chicken.a.After the unit has been ignited and it has warmed up for at least 15 minutes, loadall spits with chicken.b.Depending on the size and weight of the chickens, check the internal temperature ofa chicken (on the inner thigh) on the top spit after approximately 55 minutes. If theinternal temperature exceeds 185°F, remove the top spit.c.Move the remaining spits up one spit position. The bottom spit position shouldnow be free.d.Add a new spit, loaded with raw chickens, to the bottom spit position.e.Repeat this procedure as needed during the day.f.After the "rush" has ended and demand has decreased, turn the manifold valveknobs to the low temperature settings. This will keep the product in the rotisseriehot over a long period of time, without burning the product.2.4Cooking TimesProduct Cooking Time TemperatureChicken45 - 60 minutes"ON"Turkey120 - 170 minutes1/2 powerincrease to "ON" for last 20 min.Ribs20 - 45 minutes"ON"Beef Roast45 minutes (to 104°F)"ON"Pork Loin45 minutes (to 135 °F)"ON"Salmon20 - 30 minutes"ON"Duck120 minutes 1/2 power - 105 minutes"ON" - 15 minutesVegetables20 minutes"ON"(Zuccini)Potatoes40 minutes"ON"2.5Daily CleaningThe rotisserie should be cleaned on a daily basis.1.The exterior should be cleaned with a stainless steel cleaner.2.The glass should be cleaned with a soft cloth and degreaser. If necessary, a plasticscraper can also be used to remove carbon when using a degreaser.WARNING!The glass must be cool. Do not use steel wool or abrasives to cleanthe glass! This will weaken the tempered glass and could cause itto shatter.3.The spits and drip pans should be removed from the machine and cleanedthoroughly with a degreaser.4.Before cleaning the interior surfaces carefully cover, protect, or remove all ceramics.5.The interior stainless steel surfaces can be sprayed with a degreaser for best results.6.For best results on the interior metal, use a steam cleaner or a scrubbing sponge. Becareful not to use excessive water since this could damage the insulation on the rear,side, and front panels.7.The filters in the exhaust hood must be cleaned as required by the manufacturer. 2.6Important InformationIn case of repairs, only an approved and certified service technician should be called in.The installation can only be carried out by a certified installer. Otherwise, the warrantywill be null and void.。
Z-PACK TinMan高速板印传输器，板到板，192位，每行间距1.4毫米说明书
1934225-1Z-PACK TinMan, High Speed Backplane Connectors, Board-to-Board, 192 Position, Row-to-Row Spacing 1.4 mm [.055 in], Mating Alignment10/02/2020 01:31AM | Page 1For support call+1 800 522 6752Connectors > PCB Connectors > Backplane Connectors >High Speed ConnectorsMating Alignment Type:Guide SlotMating Alignment:WithRow-to-Row Spacing: 1.4 mm [ .055 in ]Number of Positions:192Connector System:Board-to-BoardFeaturesProduct Type Features Signal Arrangement Differential Connector SystemBoard-to-Board PCB Connector Assembly Type PCB Mount Receptacle Shroud Style Unshrouded SealableNoConnector & Contact Terminates To Printed Circuit BoardConfiguration Features Pairs per Column 4Number of Pairs 64StackableNo Number of Signal Positions 128Number of Positions 192Number of Rows 12Number of Columns16Backplane ArchitectureTraditional Backplane1934225-1 ACTIVEZ-PACK TE Internal #:1934225-1Z-PACK TinMan, High Speed Backplane Connectors, Board-to-Board, 192 Position, Row-to-Row Spacing 1.4 mm [.055 in], Mating AlignmentView on >Z-PACK TinMan|Backplane Architecture Traditional BackplanePCB Mount Orientation Right AngleElectrical CharacteristicsUL Voltage Rating250 VACImpedance100 ΩOperating Voltage250 VACSignal CharacteristicsDifferential Impedance100 ΩNumber of Differential Pairs per Column4Data Rate10 Gb/sBody FeaturesShield Material Phosphor BronzeContact FeaturesPCB Contact Termination Area Plating Material Thickness.5 µm[20 µin]Contact Type ReceptacleContact Mating Area Plating Material GoldPCB Contact Termination Area Plating Material Finish MatteContact Shape & Form Dual BeamPCB Contact Termination Area Plating Material TinContact Base Material Phosphor BronzeContact Current Rating (Max).5 ATermination FeaturesTermination Post & Tail Length 2.2 mm[.087 in]Termination Method to Printed Circuit Board Through Hole - Press-FitMechanical AttachmentMating Retention WithoutPCB Mount Alignment WithoutGuide Hardware WithoutPCB Mount Retention WithPCB Mount Retention Type Action/Compliant TailMating Alignment WithMating Alignment Type Guide SlotConnector Mounting Type Board Mount10/02/2020 01:31AM | Page 2 For support call+1 800 522 6752Connector Mounting Type Board MountHousing FeaturesNumber of Shrouded Sides0End Wall Location NoneHousing Material LCP (Liquid Crystal Polymer)Housing Color BlackCenterline (Pitch) 1.9 mm[.075 in]DimensionsConnector Length30.55 mmConnector Height20.2 mmConnector Width21.61 mmPCB Thickness (Recommended) 1.57 mm[.062 in]PCB Hole Diameter.47 mmRow-to-Row Spacing 1.4 mm[.055 in]Usage ConditionsOperating Temperature Range-65 – 90 °C[-85 – 194 °F]Operation/ApplicationCircuit Application SignalIndustry StandardsUL File Number E28476Agency/Standard ULUL Rating RecognizedUL Flammability Rating UL 94V-0Packaging FeaturesPackaging Method Box & Tube, TubeProduct ComplianceFor compliance documentation, visit the product page on >EU RoHS Directive 2011/65/EU CompliantEU ELV Directive 2000/53/EC CompliantChina RoHS 2 Directive MIIT Order No 32, 2016No Restricted Materials Above ThresholdEU REACH Regulation (EC) No. 1907/2006Current ECHA Candidate List: JUN 202010/02/2020 01:31AM | Page 3 For support call+1 800 522 675210/02/2020 01:31AM | Page 4For support call+1 800 522 6752Current ECHA Candidate List: JUN 2020 (209)Candidate List Declared Against: JUL 2019 (201)Does not contain REACH SVHCHalogen ContentNot Low Halogen - contains Br or Cl > 900 ppm.Solder Process CapabilityNot applicable for solder process capabilityProduct Compliance DisclaimerThis information is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information they provided. This information is subject to change. The part numbers that TE has identified as EU RoHS compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, mercury, PBB, PBDE, DBP, BBP, DEHP, DIBP, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2011/65/EU (RoHS2). Finished electrical and electronic equipment products will be CE marked as required by Directive 2011/65/EU. Components may not be CE marked. Additionally, the part numbers that TE has identified as EU ELV compliant have a maximum concentration of 0.1% by weight in homogenous materials for lead, hexavalent chromium, and mercury, and 0.01% for cadmium, or qualify for an exemption to these limits as defined in the Annexes of Directive 2000/53/EC (ELV). Regarding the REACH Regulation, the information TE provides on SVHC in articles for this part number is based on the latest European Chemicals Agency (ECHA) ‘Guidance on requirements for substances in articles’ posted at this URL: https://echa.europa.eu/guidance-documents/guidance-on-reachTE Model / Part #1934352-1TinMan R/A Header Assy 4x16 DoubleTE Model / Part #1934316-1Tin Man Header Assy 4x16 DoubleTE Model / Part #1934351-1TinMan R/A header Assy 4x16 openTE Model / Part #1934317-1Tin Man Header Assy 4x16 leftTE Model / Part #1934315-1TinMan Header Assy 4x16 OpenTE Model / Part #1934222-1Tin Man Recpt Assy 4Pair8ColumnTE Model / Part #1934318-1Tin Man Header Assy 4x16 RightCompatible PartsAlso in the Series Z-PACK TinMan10/02/2020 01:31AM | Page 5For support call+1 800 522 6752TE Model / Part #5179160-50.8FH,R05H.7,120,08/Sn,TR,SC,PSTE Model / Part #1934316-1Tin Man Header Assy 4x16 DoubleTE Model / Part #1934224-1Tin Man Recept Assy 4 pair10 ColumnTE Model / Part #5-147377-8100 SYS50 SMT HDRDR SHD SNTE Model / Part #1934315-1TinMan Header Assy 4x16 OpenTE Model / Part #5-5330808-3SOCKET,MIN-SPR W/KO SN-AU S-1TE Model / Part #5-5177986-10.8FH,P05H.5,040,30/Sn,TR,SCTE Model / Part #2-1926730-5AssyMINIPAKHDL25a10pRAplugBdlkTE Model / Part #2170806-2CAGE ASSEMBLY, 1X2, QSFP28, SPRING, HSTE Model / Part #2149151-1EMI/Dust Cover, CFPHigh Speed Backplane Connectors(64)Board-to-Board Headers & Receptacles(1)Customers Also BoughtDocumentsProduct DrawingsTin Man Recept Assy 4 Pair 16 ColumnEnglish CAD Files3D PDF3DCustomer View ModelENG_CVM_CVM_1934225-1_B.2d_dxf.zipEnglishENG_CVM_CVM_1934225-1_B.2d_dxf.zipEnglishCustomer View ModelENG_CVM_CVM_1934225-1_B.3d_igs.zipEnglishCustomer View ModelENG_CVM_CVM_1934225-1_B.3d_stp.zipEnglishTerms and ConditionsBy downloading the CAD file I accept and agree to the of use.Datasheets & Catalog PagesHigh Speed Backplane Connectors catalog - Z-PACK TinMan High Speed, High Density Backplane ConnectorEnglishZ-PACK TinMan High Speed High Density Backplane Connector Catalog 5-1773447-9EnglishSolutions for AdvancedTCA, AdvancedTCA 300, MicroTCA, and AdvancedMC Standards Datasheet 3-1773445-8EnglishProduct SpecificationsApplication SpecificationEnglishProduct Environmental ComplianceTE Material DeclarationEnglish10/02/2020 01:31AM | Page 6 For support call+1 800 522 6752。
dimsLabel 印刷机说明书
Instruction Manual/industrial qFigure 1 RhinoPRO 3000 PrinterAbout Your New PrinterWith your new DYMO RhinoPRO™ 3000 label printer, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different sizes and styles. The printer uses DYMO RhinoPRO Industrial label cassettes in widths of 3/8” (9mm), or 1/2” (12mm). RhinoPRO label cassettes are also available in a wide range of materials.Visit /industrial for information on obtaining tapes and accessories for your printer. Warranty RegistrationPlease complete the warranty registration card and return it to the appropriate address, or you can register online at /industrial. Getting StartedFollow the instructions in this section to print your first label.Power SupplyThe printer is powered by standard batteries or an AC power adapter. To save power, the printer will automatically turn off after five minutes of inactivity. Inserting the BatteriesThe printer uses six 1.5 volt AA alkaline batteries. To insert the batteries1.Press the thumb latch on the bottom of the printer to open the battery compartment door. See Figure2.2.Insert the batteries following the polarity markings (+ and –).3.Close the battery compartment door.Connecting the AC AdapterYou can also use an optional AC power adapter to power the printer. Connecting the AC adapter disconnects the batteries as a power source.To connect the AC adapter1.Plug the power adapter into the power connector on the top of the printer.2.Plug the other end of the power adapter into a power outlet.latch3Inserting the Tape CassetteYour printer comes with one label tape cassette. Visit /industrial for information about purchasing additional label cassettes.To insert the tape cassette1.Press the thumb catch on the right side of the printer to open the tape cassette door.2.Make sure that the tape cassette switch is set to 9/12mm. See Figure 4. A notch in the cassette fits over the switch when the cassette is in the correct position.the print head and pinch roller. See Figure 4.Figure 43.Make sure the tape and ribbon are taut across the mouth of the cassette and that the tape passes between the guideposts.4.Insert the cassette with the tape and ribbon positioned between the print head and pinch roller. See Figure5.Figure 55.Press firmly until cassette clicks into place. Make sure tape and ribbon are positioned correctly.6.Close the tape cassette door and press A to turn on the power.SettingsYou can select the language and corresponding units of measure you want the printer to use. Selecting a LanguageSeveral language-related features are determined by the language setting, such as availability of special characters. Three languages are available: English (default), Spanish, and French.See Using International Characters on page6 for information about international characters.1.2.3.You can set the units of measure to display asinches (default) or millimeters.1.2.inches or mm.3.4Printing Your First LabelYou are now ready to print your first label.To print a label1.Enter text to create a simple label.2.3.towards the back of the printer. See Figure 6.4.Become familiar with the location of the feature and function keys on your printer. See Figure1 on the inside front cover of this manual. The following sections describe each feature in detail. PowerThe A button turns the power on and off. If no keys are pressed after five minutes, the power is switched off automatically.LCD DisplayThe printer’s LCD display typically shows a row of thirteen characters. However, you can enter up to 99 characters and/or spaces. Feature and function indicators appear on the top, side, and bottom of the display to indicate that a feature or function is selected. See Figure 7.Figure 7 BacklightingWhen the printer is used in a low-light environment, the display may become difficult to read. The♦The Caps key toggles capitalization on and off. When Caps mode is turned on, the Caps indicator is shown on the display and all letters that you enter will be capitalized. The default setting is Caps mode on. When Caps mode is off, all letters♦the Language menu appears.Backspace KeyThe Backspace keyremain unchanged.FLAG HWRAP FIXED VERT PANEL SIZE XLA ACAPSAbcSERIAL;:56You review and edit your label using the arrows onDesigning Your LabelYou can choose from a number of formattingoptions to enhance the appearance of your labels.Changing the Font SizeYou can print the text on your label in four fontsizes: small, medium, large, and extra-large.you have selected.1.2.You can print the text on your label in three styles:normal (default), italic, or outline. The selected font style applies to all characters on the label.1.2.3.Adding a Box or UnderlineYou can further highlight your text by choosing a box or underline style. See Figure 8.Figure 8A label can be underlined or enclosed in a box, but not both together. When you apply the underline style to a two-line label, both lines are underlined. When you apply a box to a two-line label, the entire label text is enclosed in a single box. To add a box or underline1.2.Creating Multi-Line LabelsYou can create multi-line labels depending uponthe size of the label tape, as follows:To create a multi-line label1.2.Type the text for the next line.Using International CharactersThe printer supports the extended Latin character set using RACE technology. Similar to using a mobile phone keypad, typing a letter multiple times quickly will scroll through variations of that letter.S M L XLTape Size 3/8” (9 mm)1/2” (12 mm)Number of Lines227For example, if French is selected as the language and you repeatedly press the letter a , you will see a àâæ and so on through all the variationsavailable. The character variations and the order in which the variations appear depend on the language you have selected to use.Adding SymbolsThe printer supports the extended symbol set as shown in Figure 9.Figure 91.e the arrow keys to move to the desiredsymbol. You can move horizontally and vertically through the rows of symbols.3.symbol to your label.Saving your LabelYou can save up to 25 labels in memory.To save a label1.2.(01, 02 ... 25). If a memory location contains a saved label, the label content is displayed next to the number.3.4.Once a label is saved to memory, you can recall the label to print or edit.1.2.A !¡?¿.B ,'#%&C ;"+=*D -:/()E ~\@±½F $£¢$¼G_H I J K L M Ø°N O¬8Deleting a Label from MemoryWhen you no longer need a stored label, you can delete it from memory.1.e the arrow keys to move to the memorying the Hot Key FunctionsYour printer includes several Hot Key TM functions that allow you to print specific types of labels. Hot Keys are available for printing flag, wrap, fixed-modes, the labelmaker remains in that print mode until you either select another hot key or selectnormal mode.♦Flag labels wrap around a wire or cable leaving the text part of the label extending out from the cable. See Figure 10.Figure 10The default diameter is 3/8” (9 mm). The length ofthe label tape between the label text (U )is approximately 1.1” (28.27mm).The text on flag labels is automatically printed on both ends of the label leaving a blank space in the middle that wraps around the cable. When the labelis applied to the cable, both ends of the label are applied back to back leaving a tail or flag . The result is a label that can be read from both sides.1.2.Printing Wrap LabelsYou can create labels that wrap arounda cable orwire. A line of text is placed horizontally or vertically along the width of the cable, and repeated so that you can read the label from any angle.Horizontal Wrap LabelsHorizontal wrap labels can contain letters, numbers, or symbols.1.2.Vertical Wrap LabelsVertical wrap labels are printed in a fixed length of 1.5” (40 mm) and can contain up to five letters or numbers; but no symbols.1.2.Printing Fixed-Length LabelsNormally, the length of the label is determined by the length of the text entered. However, you may wish to make a label for a specific purpose that is a fixed length regardless of the length of the text.UFM RMFM RMFM RMLeft Speaker Left SpeakerLeft Speaker Left Speaker1231231231231231231239You can specify a fixed length for a label in 0.1” (2mm) increments between 1.5” (40mm) and 25.0” (650mm). The preset fixed length is 1.5” (40mm). Any change you make to the fixed length setting remains in effect until you change it.To set the label length1.2.3.Figure 11Printing Distribution Panel LabelsDistribution panel mode allows you to create a label that contains boxes of information for labeling multiple items in one location; for example, anumber of ports on a distribution panel. You define the number of boxes to label, set the length and enter the text for each box, and then print. The result is a long label with correctly spaced boxes of text for each port.1.2.Enter the number of boxes and press3.default length is 1.5” (40mm).4.Select 1 or 2 lines of text, and press5.Enter the text for the first box and pressshows TextBox01Row2 indicating.6.are ready to enter text for the next box.7.Repeat steps 5 and 6 until all boxes are printed.Printing Vertical LabelsLabels can be printed with the text running vertically. For two-line labels, the second line prints directly below the first line, separated by a space.1.2.Using the Pre-defined Text KeysYour printer includes four Hot Keys that allow you to access pre-defined text. These Hot Keys include Location, Audio/Video, Voice/Data, and Security.To add text to a label1.Press one of the text Hot Keys.2.Select the label text using one of the following methods:e the arrow keys to scroll through the list.4.Press the first letter of the text label you wish to use. The cursor jumps to the first label that5.shown on the next page.Location Hot KeyThese pre-defined text keys can be very powerful when used with flag and wrap mode. The following example shows how to quickly print a flag label for a speaker wire in your home-entertainment system. 1.2.3.Press the letter L. Left Back Speaker appears inAtticBack Basement Bath Bedroom Billiards Room Center ClosetDeck DemarcDenDining Room Dressing Room FloorFoyerFront GarageGateGuest Bath Guest House Guest Room GymHot Tub Inside Kitchen Laundry Room LeftLibraryLiving Room LobbyLowerMain Floor Master Bath Master Bedroom Media Room Office OutsidePatioPlay Room PoolPorchRightSitting Room SpaStudy Sunroom Theater UpperUtility RoomAnalogCATVCDCenter Back Speaker Center Front Speaker Component CompositeDigitalDVDDVIDVRHDMIHDTVIRKeypadLeft Back Speaker Left Front Speaker Left Outdoor Speaker Left Side Speaker Left Surround Speaker MonitorOpticalPhono ProjectorRemoteRFRGBRight Back SpeakerRight Front SpeakerRight Outdoor SpeakerRight Side SpeakerRight Surround SpeakerRS-232SATSpeakerSubwooferSurroundS-VideoTapeTouch ScreenTVVCRVESAVideo GameVolume ControlZoneCable ModemCODemarcDesktopDSLDSLAMFaxInternetLANLaptopNetworkPhonePhone SystemUSBVoIPWirelessBack DoorCameraCarbon MonoxideCCTVCellContactControllerDoorDoor ContactDrivewayDual TechDuctFan CutoffFront DoorGarage DoorGasGateGlass BreakGroundHeat DetectorHigh WaterHornKeypadLow TempMotion SensorPhonePIRPoolPowerRemoteSensorShock SensorSirenSlidersSmoke DetectorSpareStrobeWater DetectorWindowWindow Sensor1011Printing OptionsYou can choose to print multiple copies of the same label, print serialized labels, or print a combination of both.Printing Multiple CopiesYou can print up to 50 copies of the same label at one time. When printing multiple copies, a dotted cut-line is printed between each label.1.2.;copies to print. The default is 2 copies.3.Press the : arrow to decrease the number of 4.When printing is finished, the number of copies to print returns to 2.Serializing Your LabelsYou can print serialized labels numerically or alphabetically. Numbers can be incremented from 1-99 and letters from A-Z.You can serialize any number or letter by placing the cursor (|) behind the position to beincremented, such as the number 2 in 12|3 or the letter B in AB|C. For example, with the cursor behind the 2 in 12|3 and the increment #=3, the resulting labels would print as 123, 133, and 143.Figure 12When the letter Z or the number 9 is reachedduring serialization, a letter or number is added to increase the increment. For example, Z increments to AA and 9 increments to 10.space are serialized. To serialize your labels1.Enter the text for your label.e the arrow keys to move the cursor behindthe letter or number to serialize.3.4.Printing begins automatically.Advancing the Label TapeThe default leader space for all labels isapproximately 7/16” (11.5mm). To add additional blank space to the beginning or end of your label,you can feed the tape in 0.25” (6mm) increments.♦Depending on the label material you choose, you may need to lighten or darken the print on the label. Adjusting the print head temperature allows you to control the print quality (±20).1.2.temperature 3.the print quality.123133143Cleaning Your PrinterYour printer is designed to give you long and trouble-free service, while requiring very little maintenance.Clean your printer from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.To clean the cutter blade1.Remove the label cassette.2.Place the tip of a ball-point pen or pencil on the L-shaped piece as shown in Figure 13, and press the piece down.3.While holding the L-shaped piece down, press and hold the cutter lever to expose the cutter blade.e a cotton ball and alcohol to clean both sides of the blade.5.Release the cutter lever.To clean the print head♦Clean the print head using the cleaning tool located inside the tape compartment lid.You can also use the optional cleaning pen to clean the cutter blade and print head.1213TroubleshootingReview the following possible solutions if you encounter a problem while using your printer.If you still need assistance, contact DYMO Customer Support for your country. A list of contact numbers for each country is included on the inside back cover of this manual.Documentation FeedbackWe are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our documentation. Please include the following information with your feedback:•Product name, version number, and page number•Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on)We also welcome your suggestions about additional topics you would like to see covered in the documentation.Send email messages to: **********************Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact Customer Support.Error Message/Problem SolutionNo display •Ensure the printer is turned on.•Replace discharged batteries.Poor Print Quality•Replace discharged batteries.•Ensure tape cassette is installed properly.•Clean the print head.•Replace the tape cassette.Poor Cutter PerformanceClean the cutter blade. See Cleaning Your Printer .L= n.nn” (or nnnn.n mm)Fixed length setting is too small for text.•Set the fixed length to a size longer than the text, or •Decrease the amount of text.Text Too LongExceeded maximum number of characters in buffer.Delete some or all of the buffer text.Too many linesExceeded maximum number of lines allowed.Select another format.Print ErrorUndetermined printer error.Check for label jam, empty label cassette, discharged batteries, or other problems.Tape Too SmallTape size is too small for label content entered.•Insert a larger size label cassette, or •Decrease the size of the label content.No TapeLabel cassette missing or empty.Insert a new label cassette.Battery lowBatteries almost discharged.Replace batteries or connect AC power adapter.Tape JamMotor is stalled due to label jam.•Remove jammed tape and replace label cassette. •Clean cutter blade.This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:US FCC Class B CompatibilitySafety - EN 60950, IEC 950, UL 1950EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;EU Immunity – EN 55024 & addendums A1, A2 Electromagnetic Compatibility (EMC) - Information Technology equipment, Immunity CharacteristicsEmissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards - Section 3: Emission standard for residential, commercial and light industrial environments.Esselte is an ISO 14001 registered company. Plastic components of this printer have been marked to enable final disposal in a manner that is sensitive to the environment.14Contacting Customer SupportThe following table provides a list of telephone numbers to reach DYMO Sales and Support departments. You can also reach DYMO at .Country Telephone Support Fax SupportAustralia1800/ 633 8681800/ 817 558Austria01/ 599 14 20 1202/627-400-160Belgium02/ 713 38 08+31/ 20/ 581 93 80Canada(800) 263-6105Czech Republic02/619 12 720+02/619 12 730Denmark35 25 65 08+31/ 20/ 581 93 80Finland09 229 07 04+31/ 20/ 581 93 80France01/69 32 49 32+31/ 20/ 581 93 80Germany069/ 66 56 85 29+31/ 20/ 581 93 80Hong Kong+852 2527 1928Hungary 1 424 6600 1 424 6601Ireland(+35)3 14118934Italy02/ 45 28 13 08+31/ 20/ 581 93 80Mexico+01 5368 2066The Netherlands020/581 93 86020/ 581 93 80New Zealand0800 803 9660800 737 212Norway22 97 17 10+31/ 20/ 581 93 80Poland00800/311 12 50+31/ 20/ 581 93 80Slovakia(+420) 2/619 12 720(+420) 2/619 12 730Spain/Portugal91/662 31 49+31/ 20/ 581 93 80Sweden08/ 632 00 57+31/ 20/ 581 93 80 Switzerland01/342 04 66+31/ 20/ 581 93 80Turkey212/ 286 26 30 PBX212/ 286 26 28United Kingdom(+44) 020/ 7341 55 29+31/ 20/ 581 93 80United States(203) 588-2500DYMO Corporation44 Commerce RoadStamford, CT 06902© 2004 DYMO Corporation. All Rights Reserved. 11/04No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of DYMO Corporation.RhinoPRO and Hot Key are trademarks of DYMO Corporation. DYMO is a registered trademark of Esselte Corporation. All other trademarks are the property of their respective holders.。
TM BUILT TO PERFORM 移动打印机工作说明书
SPECIFICATION SHEETWorkForceThe lightweight, wireless mobile printer for professionals on the go.The world’s lightest and smallest mobile printer1— the ultimate in portability;ready to print invoices, presentations, contracts and moreBuilt-in wireless and Wi-Fi Direct®2 — easily print from iPad®, iPhone®, tablets,smartphones and laptops3Flexible battery charging — travel-friendly USB battery charging; or, use the ACadapterBuilt-in battery — a rechargeable lithium-ion battery offers dependableperformance in a small packageProductivity-boosting portability — print professional-quality business documentsor borderless 4" x 6" photos anywhere, anytimeEfficient — save battery life with the automatic power-off featureEasy to use — bright 1.4" color LCD plus convenient control panel for simple setupand operationProfessional-quality prints — speeds up to 6.7 ISO ppm (black) and3.8 ISO ppm (color)†Durable, quick-dry inks — for fade and water resistant printsSleek design — designed to keep up with busy professionals on the goDesigned for use exclusively with Epson ink cartridges.*WorkForce® WF-100WIRELESS MOBILE PRINTERHi-Speed USB Wireless (802.11 b/g/n)2 Wi-Fi Direct 2Operating Systems Windows ® 8.x (32-bit, 64-bit), Windows 7 (32-bit, 64-bit), Windows Vista ® (32-bit, 64-bit), Windows XP SP3 (32-bit), Windows XP Professional x64 Edition, Windows Server ® 2012 R24, Windows Server 20124, Windows Server 2008 R24, Windows Server 20084, Windows Server 2003 R24, Windows Server 20034, Mac OS ® X 10.5.8 – 10.9.x 5Mobile Printing Epson Connect ™3 Epson ® Email Print, Epson iPrint ™ Mobile App, Epson Remote Print Other Apple ® AirPrint™, Google Cloud Print™, Kindle Fire™Paper Handling Maximum Paper Size 8.5" x 14"Paper Sizes 3.5" x 5", 4" x 6", 5" x 7", 8" x 10", 8.5" x 11",A4, A6, half letter, executive Borderless Photo Sizes 4" x 6"Paper Types Plain paper, Epson Bright White Paper, Epson Presentation Paper Matte, Epson Premium Presentation Paper Matte, Epson Premium Presentation Paper Matte Double-sided, Epson Premium Photo Paper Glossy, Epson Ultra Premium Photo Paper Glossy, Epson Premium Photo Paper Semi-gloss Envelope Types No. 10; plain paper Input Paper Capacity 20 sheets plain paper 1 envelope, 5 sheets photo paper DC Power Inlet: 24V Rated Frequency 50 – 60 Hz Rated Current 0.4A - 0.2A (Not charging battery) 0.6A - 0.3A (Charging battery)Charge via USB Yes (when charging via USB, printer must be turned off or sleep condition)Recharge Time with AC Adapter 2.5 hours Recharge Time with USB (Power Off)2.5 hours (1.5A)10 hours (0.5A)Quick Charge (w/AC Adapter) 5 minutes (up to five Black & White prints)Battery Life 100 Black & White pages / 50 color pagesPower Consumption Approx. 11 W Not Charging (Printing) Approx. 14 W Charging (Printing)Approx. 4 W Not Charging (Ready)Approx. 14 W Charging (Ready)Approx. 1.3 W Not Charging (Sleep)Approx. 12 W Charging (Sleep)Approx. 0.3 W Not Charging (Power Off)Approx. 11 W Charging (Power Off)Safety ApprovalsSafety standards UL60950, CSA C22.2 No. 60950EMI FCC Part 15 subpart B class B,CAN/CSA-CEI/IEC CISPR 22 class BSpecifications and terms are subject to change without notice. EPSON, Epson ESC/P , MicroPiezo and WorkForce are registeredtrademarks, EPSON Exceed Your Vision is a registered logomark and Epson Connect and Epson iPrint are trademarks of Seiko Epson Corporation. Built to Perform is a trademark of Epson America, Inc. Apple, iPad, iPhone and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. AirPrint is a trademark of Apple Inc. Google Cloud Print is a trademark of Google Inc. Wi-Fi Direct ® is a registered trademark and Wi-Fi CERTIFIED ™ is a trademark of Wi-Fi Alliance ®. All other product andbrand names are trademarks and/or registered trademarks of their respective companies. Epson disclaims any and all rights in these marks. Copyright 2014 Epson America, Inc.CPD-41544 9/14Epson America, Inc. 3840 Kilroy Airport Way, Long Beach, CA 90806Epson Canada Limited 185 Renfrew Drive, Markham, Ontario L3R www.epson.ca† Print speed quoted using AC power. Battery-powered print speeds are 3.5 ISO ppm (black) and 2.0 ISO ppm (color). Black and color print speeds are measured in accordance with ISO/IEC 24734. Actual print times will vary based on system configuration, software, and page complexity. For more information, visit /printspeed | †† Color photo in Draft Mode on Premium Photo Paper Glossy measured from start of paper feed. Actual print times will vary based on system configuration, software and page complexity. See /printspeed for details. | 1 World’s lightest and smallest mobile printer based on mobile color inkjet printers priced at $399 (USD) or less, available at U.S. retail stores as of April 2014. | 2 Wi-Fi CERTIFIED™; level of performance subject to the range of the router being used. Wi-Fi Direct may require printer software. | 3 Most features require an Internet connection to the printer, as well as an Internet- and/or email-enabled device. For a list of Epson Connect enabled printers and compatible devices and apps, visit /connect | 4Only printing is supported under Windows Server OS. | 5 Some applications and/or functions may not be supported under Mac OS X. | 6 Replacement cartridge yields are based on ISO/IEC 24711 tests in default mode printing continuously. Cartridge yields vary considerably for reasons including images printed, print settings, temperature and humidity. Yields may be lower when printing infrequently or predominantly with one ink color. All ink colors are used for printing and all-in-one maintenance, and all colors have to be installed for printing. For print quality, part of the ink from the included cartridges is used for printer startup and a variable amount of ink remains in the cartridges after the “replace cartridge” signal. For details, see /cartridgeinfo | 7 Internet access is required to install OS X drivers and software. | 8 Display permanence based on accelerated testing of prints displayed under glass in indoor display conditions; album permanence based on accelerated testing of prints in dark storage conditions. Actual print stability will vary according to media, printed image, display conditions, light intensity, temperature, humidity and atmospheric conditions. Epson does not guarantee the longevity of prints. For maximum print life, display all prints under glass or UV filter or properly store them. | 9 For convenient and reasonable recycling options, visit /recycle | 10 SmartWay is an innovative partnership of the U.S. Environmental Protection Agency that reduces greenhouse gases and other air pollutants and improves fuel efficiency.Ink Palette Cyan, Magenta, Yellow and Black Ink Cartridge ConfigurationOne individual Black ink cartridge, one Tri-color ink cartridge (Cyan, Magenta, Yellow)Fade Resistance / Print Longevity 8 Up to 118 years Replacement Ink Cartridges 6 T215 Standard-capacity Black (Yield, ISO pages – 250)T215 Standard-capacity Tri-color (Cyan, Magenta, Yellow)(Yield, ISO pages – 200)Printer is designed for use with Epson cartridges only, notthird-party cartridges or ink. /cartridgereturn*Eco Features RoHS compliantRecyclable product 9Epson America, Inc. is a SmartWay SM Transport Partner 10Ordering Information WorkForce WF-100 C11CE05201*This product uses only genuine Epson-brand cartridges. Other brands of ink cartridges and ink supplies are not compatible and, even if described as compatible, may not function properly.。
SOR Form 169 (04.01) 美国印制设备说明说明书
SOR Form 169 (04.01) Printed in USAPage 1 of 4connection. Tighten probe hex fitting with 1-1/8-inch open-end wrench for leak free fit. A locally customized mounting bracket may be used if more support is desired. Housings L, S, TA, V1, V2, V3, LC, SC, BA,B3, B4, B5 and B6 are not recommended for direct mount where vibration is expected. These housings should be securely mounted to a flat surface (bulk-head or panel rack) or pipe stanchion.Remote-Mount Probe — Capillary1.Secure housing-mounting pad to bulkhead, panel rack or pipe stanchion with suitable 1/4-inch (6.35 mm) bolts.IMPORTANT: When mounting to an irregular or uneven surface, install rubber washers on bolts between housing and mounting surface (except for high vibration applications) to prevent deformation of housing, which could change relative positions of internal parts and affect calibration or render device inoperative.2.Mounting by electrical conduit connection is NOT recommended.3.Suggested mounting orientation is electricalconduit connection at 3 or 9 o'clock and sensing body at 6 o'clock. However, device is not position sensitive and can be mounted in any position. If breather drain is installed, it must be oriented at 6o'clock (pointing down) so condensation will drain.It must be kept clear of paint and foreign matter.4. Carefully insert sensing probe into process through suitable fitting or thermowell. Adjustdesired insertion length. Tighten probe hex fitting with 7/8" open-end wrench. Tighten 9/16" hex nut to fingertight. Then hold the 7/8" fitting with awrench and tighten the 9/16" hex nut an additional 1-1/4 turns from finger tight. Avoid sharp bends incapillary.Temperature SwitchesGeneral InstructionsInstallationGeneralThis instruction provides information for mounting,electrical connection, process connection, and calibration of SOR Temperature Switches.NOTE: If you suspect that an instrument is defective,contact the factory or the SOR representative in your area for a return authorization number. If the instru-ment cannot be returned for service, field work should be performed by a qualified instrument technician using factory authorized procedures. Contact the factory or the SOR representative in your area for technical support.The SOR Temperature Switch consists of a pressure switch with a sealed temperature sensing bulb at-tached directly to the pressure port. (An optional remote temperature sensing bulb can be connected to the pressure port with an armor-clad capillary.) The temperature sensing system is pressure filled with a volatile fluid. Process temperature changes cause proportional vapor pressure changes in the tempera-ture sensing bulb that act on the diaphragm/ piston assembly to actuate and deactuate a snap-action electrical switching element at discrete process temperatures. The instrument’s behavior is deter-mined by vapor pressure. (105 range model fill media is inert gas.)Design and specifications are subject to change without notice.Direct-Mount ProbeThe temperature sensing probe is rigidly attached to the instrument’s body/housing. Carefully insertsensing probe into process through suitable fitting or thermowell. Standard process connection is 1/2-inch NPT(M). Ensure that ample clearance exists before rotating the instrument housing to make threadedProcess ConnectionTemperature sensing probe is 300 series stainless steel. If process is compatible, it may be directlyinserted into the process without use of a thermowell.Best results are obtained when the probe is com-pletely immersed in the process. A thermowell in-creases response time (lag). A thermowell filled with thermal transfer media reduces lag.Process Connection For latest revision, see Registered Quality System to ISO 9001Page 2 of 4SOR Form 169 (04.01) Printed in USAFor instruments with 3/4-inch hex set point adjustment:Use 3/4-inch open-end wrench to turn hex adjusting nut clockwise to increase set point, and counterclock-wise to decrease set point. Approximate set point can be obtained by sighting across top of adjusting nut to calibration scale on the housing floor. If precise set point calibration is required, it will be necessary to use a regulated thermal bath and suitable continuity tester. Consult factory.For instruments with dead band adjustment:Use the fixed dead band procedure (above) to cali-brate the desired decreasing temperature set point.The increasing temperature set point can then be adjusted by turning the white thumbwheel on the electrical switching element. Setting A yields the smallest possible dead band. Setting F yields the widest possible dead band. Settings above E may degrade repeatability.CAUTION: Switching Element Assembly has been precisely positioned in the housing at the factory for optimum performance. Any inadvertent movement or replacement in the field will degrade performance and could render the device inoperative, unless factory authorized procedures are followed.When making electrical connections, use care to apply minimal strain to the electrical switching element. Refer to wiring schematic on reverse for terminal and wire codes.Ensure that wiring conforms to all applicable local and national electrical codes and install unit(s) according to relevant national and local safety codes.Disconnect electrical power to temperature switch.Remove housing cover ( or weathertight cap).NOTE: It is not necessary to disconnect electrical power with the Big Hermet series or models in B3, B4, B5 and B6 housings provided that only the cover fastened with four captive screws over Set Point adjustment is removed.WARNING: Units in Hazardous Locations — Prior to calibration, make sure that the work area is declassified before removing the explosion proof cover to calibrate the unit. Failure to do so could result in severe personal injury or substantial property damage.For instruments with 1/8" hex Allen wrench set point adjustment under weathertight cap:Use 1/8" hex Allen wrench to turn adjusting screw to achieve desired set point. Turn adjusting screw clock-wise (in) to increase set point and counterclockwise (out) to decrease set point. Calibration scale is notinstalled, so external measurement of process tempera-ture is necessary. Consult factory.1.The terminal box to which the equipment isattached must, together with the switch, ensure the requisite thread engagement for Apparatus Group IIC.2.The reliability of the diaphragm has beenassessed on the basis of 100,000 operations. The diaphragm assembly must be changed before this number of operations is exceeded.3.When the switch is attached to an increasedsafety terminal box the assembly must be capable of withstanding the impact test specified in BS 5501: Part 1: 1997.4.The sealing arrangements must maintain the minimum lP54 rating required by the increased safety enclosure.5.The switch must attach to the enclosure using an existing entry.SOR Form 169 (04.01) Printed in USA Page 3 of 4SPDTDPDTBlue (C)Black (NO)Red (NC)TemperatureGreen (GND)Blue (C)Black (NO)Red (NC)TemperatureNO1NO2Yellow (C2)Brown (NO2)Orange (NC2)Remote MountDirect MountSee Housing Dimensions52.32.06Armored Capillary 300 Series SSSensing Bulb Extension 3.16 SS1/2” NPT (M)Temperature Sensing Bulb 347 SS for Range 105316 SS For all Others263.4 Max 10.37308.312.06Approximate Range of AdjustmentGreen (GND)Linear = mmin.For “V” Series, see Housing DimensionsFor All Others, subtract .29from Housing Dimensions12.7 .501/2” NPT (M)22.6 .89Sensing Bulb Extension 316 SSPage 4 of 4SOR Form 169 (04.01) Printed in USARegistered Quality System to ISO 9001。
Silver Fox Labacus Innovator 印刷标签软件及打印机使用指南说明书
Labelling information to be printed should be prepared using the Silver Fox Labacus® Innovator labelling software. The labels should be printed using the Silver Fox DTP-1/300 thermal printer. Follow the instructions in the printer manual and/or help file for printer settingsPRINTINGProduct Datasheet 1/1How to apply yourSilver Fox labelsSTORAGE INSTRUCTIONS APPLICATION information only and without guarantee and does not constitute a warranty. We are not able to anticipate every set of conditions, so always suggest that users should also satisfy themselves as to the suitability of our products for their particular environment and application and not make any assumptions based on information in this data sheet that is included or omitted. This datasheet supersedes any previous information/datasheet released and is subject to change without notice.Copyright © Silver Fox | 2019 Version 1PREPERATIONThe surface of the product to be labelled should be clean, dry, should have no grease and be dust free. The product may be cleaned with an industrial cleaning solution or Isopropyl Alcohol (check product instructions before doing this). Wipe dry with a clean lint-free cloth. It is recommended that the operative applying the labels should wash and dry their hands before applying the product to remove and dirt or grease that may be present.Adhesive LabelsRemove the adhesive label from the backing sheet then carefully apply to the surface of the product.Heatshrink/Non-ShrinkCarefully cut each label from the strip at the cut marks with scissors then slide on to the cable.In the case of heatshrink a standard heat gun can be used at a low-mid range heat setting.Tie-on LabelsCarefully tear the label off the strip then apply to the product using either standard grade nylon cable ties or stainless steelcable ties.APPLICATION OF WRAP AROUND LABELS SHOWN BELOW For more information and to discuss your needs please contact our sales team on: +44 (0)191 410 4292 or email | ***************************.uk||********************.uk。
{za}e5打印机英文技术说明书507
CTGS--资料文件____________________________________________________________________ Canon MP Navigator EX Version 5.0.0forMicrosoft WindowsInstructions*** Copyright CANON INC. 2011 ***____________________________________________________________________ < Contents >IntroductionForewordAbout TrademarksInstallation Components==================================================================== Introduction==================================================================== < Foreword >Thank you for using Canon MP Navigator EX.This application software allows you to scan,save and print photos and documents.You can also edit images, or attach images to e-mail usingthis application software.< About Trademarks >Microsoft is a registered trademark of Microsoft Corporation.Windows is a trademark or registered trademark ofMicrosoft Corporation in the U.S. and/or other countries.All brand names and product names mentioned in this documentare trademarks or registered trademarks of their respectivecompanies.< Installation Components >This product includes the following items.Canon MP Navigator EX (hereafter called MP Navigator EX)This application software allows you to save, print,attach (e-mail) or edit scanned images easily.UninstallerThis deletes unnecessary files related to MP Navigator EX.MP Navigator EX ReadMe (Readme.txt)This file. It provides important information aboutMP Navigator EX.When you are finished with installation, select [Start]-[(All)Programs]-[Canon Utilities]-[MP Navigator EX 5.0]-[MP Navigator EX Readme] to display the contents of this file.。