GE_KELMAN安装手册

合集下载

GE Fanuc ME软件配置及使用

ME软件配置及使用教学目标了解GE FAUNC Series 90-30系统的硬件模块；熟悉GE FAUNC ME软件的使用；熟练掌握系统硬件配置及连接；学会对简单程序的编译、下载及运行。

教学内容一、了解GE FAUNC Series 90-30系统的硬件模块表1-1 模块类型说明序号模块类型（英）模块类型（中）举例1 3rd Party 第三方模块3rd Party2 Power Supplies 电源模块IC693PWR3303 Central Processing Unit 中央处理单元模块IC693CPU3314 Discrete Input 数字量输入模块IC693MDL240 IC693MDL6345 Discrete Output 数字量输出模块IC693MDL3406 Discrete Mixed 数字量混合模块IC693MAR5907 Analog Input 模拟量输入模块IC693ALG2218 Analog Output 模拟量输出模块IC693ALG3929 Analog Mixed 模拟量混合模块IC693ALG44210 Communications 通信模块IC693PBS201 IC693CMM32111 Bus Controller 总线控制器模块IC693BEM33112 Motion 运动控制模块IC693DSM302 IC693APU305二、硬件配置一般，首次安装完ME软件后，需从开始菜单运行ME，即【开始】——【所有程序】——【GE Fanuc】——【Proficy Machine Edition】——【Proficy Machine Edition】或者将此可执行标志发送到桌面快捷方式，以后便可直接双击桌面上的图标运行ME软件。

1．运行ME第一次运行ME时，将出现如图1.1所示的初始画面。

其中“环境主题”界面供选择几种不同的主题，不同主题确定不同的窗口的布局、工具栏和其他设置使用的开发环境。

Gempack安装使用说明

GEMPACK 8.0 安装使用说明个人电脑的Windows为均衡模型的模拟提供了很好的平台。

这个文件介绍了如何在Lahey Fortran程序编译器LF90或Fujitsu Fortran 程序的支持下安装和使用GEMPACK软件。

该文件还介绍了如何安装Windows GEMPACK的其他程序WinGEM，ViewHAR，ViewSOL，RunGEM，TABmate和AnalyseGE，和电子版本的GEMPACK。

第一章1 GEMPACK的Windows PC源程序该文件告诉你如何在安有FORTRAN编程软件的电脑上安装GEMPACK的源程序。

适用的编程软件是Lahey Fortran LF90或LF95。

文件GPD-6介绍了安装说明如下：1、从GEMPACK CD安装该软件2、运行程序建立GEMPACK数据库和GEMOACK程序3、安装Windows GEMPACK程序（WinGEM，ViewHAR，ViewSOL，RunGEM，TABmate和AnalyseGE）4、安装GEMPACK文件的电子版GPD-6还包括了关于在电脑上用GEMPACK工作的相关的信息。

GPD-1是GEMPACK的说明书。

按照GPD-1你可以在不熟悉该软件的情况下安装和测试GEMPACK。

但是当你要使用GEMPACK工作是时候还是要仔细阅读GPD-1的1-3章。

关于不同的GEMPACK程序说明可以在GPD-1的1.7章节找到，模型的说明在1.8节。

适用例子的说明在GPD-1的2，3，4章和GPD-8中。

1.1 现有版本现在的版本是GEMPACK8.0。

第二章2 系统要求1、一台奔腾电脑，或者PC机2、Win95，Win98，WinME，WinNT，Win2000，WinXP.3、硬盘要求有100MB的地方来安装和测试GEMPACK。

4、需要至少32兆或48兆的内存容量，如果你使用的是WindowsNT或2000或者是XP。

Dell OpenManage 安装和安全性用户指南说明书

Dell™ OpenManage™ 安装和安全性用户指南"注"和"注意"本说明文件中的信息如有更改，恕不另行通知。

未经 Dell Inc. 书面许可，严禁以任何形式复制这些材料。

本文中使用的商标：Dell 、DELL 徽标、OpenManage 、PowerEdge 、PowerConnect 和 PowerVault 是 Dell Inc. 的商标； Microsoft 、 Windows 、Windows NT 、Windows Server 、Vista 、Hyper-V 和 Active Directory 是 Microsoft Corporation 在美国和/或其他国家/地区的商标或注册商标； Red Hat 和 Red Hat Enterprise Linux 是 Red Hat, Inc. 的注册商标；Novell 、SUSE 和 ConsoleOne 是 Novell, Inc. 在美国和其它国家/地区的注册商标；UNIX 是 The Open Group 在美国和其它国家/地区的注册商标；Intel 是 Intel Corporation 在美国和其它国家/地区的注册商标； VMware 是 VMware, Inc. 的注册商标，而 ESX Server 是 V Mware, Inc. 的商标； Citrix 和 XenServer 是 Citrix Systems, Inc. 在美国和/或其它国家/地区的商标或注册商标。

本说明文件中述及的其它商标和产品名称是指拥有相应商标和产品名称的公司或其制造的产品。

Dell Inc. 对本公司的商标和产品名称之外的其它商标和产品名称不拥有任何专有权。

2008 年 7 月简介在 Microsoft Windows Server 2008 Core 和 Microsoft Hyper-V Server 上安装 Dell OpenManage 软件Dell OpenManage 安全保护在支持的 Linux 操作系统上安装 Managed System Software 设置和管理使用 Microsoft Active Directory 使用系统构建和更新工具安装操作系统前提条件检查程序安装 Management Station Software常见问题在 Microsoft Windows 操作系统上安装 Managed System Software词汇表注： "注"表示可以帮助您更好地使用计算机的重要信息。

SYMANTEC企业版安装手册

SYMANTEC企业版安装手册一．服务器安装在服务器端放入安装光盘，在出现的安装界面上选择“安装SYMANTEC ANTIVIRUS”－>部署SYMANTEC服务器，“安装管理员工具”－>安装SYMANTEC系统中心，安装SYMANTEC PACKAGER这三个组件。

1．安装SYMANTEC服务器启动安装界面，根据提示操作，在选择服务器的左边对话框中选择您要安装到的服务器，单击添加，使其添加到右边的对话框中。

下一步。

在选择服务器组的对话框界面，您可以键入一个自定义的服务器组名以便创建一个新服务器组，也可以选择已存在的服务器组使您的服务器加入这个组成为这个组的二级服务器（同一组中二级服务器和一级服务器可自定义）。

一直单击下一步直到安装完成。

2．安装SYMANTEC系统中心SYMANTEC系统中心是一个基于MMC控制台的集中管理工具，安装他需要IE5.5SP2以上的系统需求，并且需要WINDOWS2000的MMC支持。

这个工具没有特别的安装步骤，完成后重启即可。

3．安装SYMANTEC PACKAGERSYMANTEC PACKAGER是用于客户机端的分发包创建工具，这个工具安装完成后，会自动创建客户端安装包配置文件，位置在桌面－>我的文档－>packager目录下。

请不要对此文件夹中内容做任何改动，否择将无法生成客户端安装包。

您可以打开packager主程序，在“配置产品”标签栏中选择客户端安装包，双击打开产品编辑器，在“功能”标签栏中选择客户端所需要安装的组件，在“安装选项”标签栏中，请配置以下选项：1．目标位置。

您可以自定义安装到客户机上的程序位置2．桌面快捷方式您可以自定义是否在桌面安装客户端的快捷方式3．“Symantec AntiVirus Server”名称选择要您要用于管理的服务器的名称（如果服务器属于某一个域，请不要输入整个域名，只输入机器名）。

4．网络设置类型从“不接受管理”改为“接受管理”。

莫勒控制器系统安装手册说明书

1PageProgrammable logic controllersPLCs 1-2xSystem 1-4Modular I/O system XI/ON1-6Networkable motor starters xStart-XS1 1-8Networking PS40 series 1-10Networking xSystem1-11Networking display and operating devices 1-12Networking embedded HMI-PLCs 1-13Engineering XC100/XC200 1-14Engineering PS4 1-16Engineering EM4 and LE41-191Programmable logic controllersThe programmable (logic) controller (PLC) is anelectronic device for machine or process control.The PLC receives signals via inputs, processesthem according to the instructions of a program,and transfers signals to the outputs.The program is created using programmingsoftware which is able to link inputs and outputsin any required sequence, to measure time, oreven carry out arithmetic operations.The most important specifications of a PLC are itsmaximum number of inputs/outputs, its memorysize and its processing speed.The PS40 Series and the new xSystem are the twoautomation systems offered by Moeller. These aredescribed below.PS40 SeriesCompact PLCsThe PS4 compact PLCs have the following systemcharacteristics:•Standard programming•Remote and local expansion options•Integrated fieldbus interface (Suconet)•Plug-in screw terminals•Small, compact in sizeThe controllers in this range are very versatile witha wide range of features, such as integratedsetpoint potentiometers, analog inputs/outputs ormemory expansion modules (from PS4-150).Moellers' entire PLC range is described in the MainCatalogue for Automation Systems and Drives, aswell as in the Product overview for automation.Modular PLCsThe PS416 modular PLC has the following keyfeatures:•High processing speed•Compact size•Wide range of networking options•Extensive memorySucosoft programming softwareSucosoft is the name of the software forprogramming the PS40 PLCs.Program examples are provided in the PLCBeginners' Guide “Automation withProgrammable Logic Controllers” (FB2700-017).1PS4/EM4:Compact PLC or expansion module LE4:Local expansionPS416: Modular PLC1xSystemxSystem is Moeller's latest modular automationsystem. It can be configured for the individualrequirements of small or large applications.xSystem reduces the hardware and softwareinterfaces required. The system features ITfunctions that are already integrated.The XSoft software combines programming,configuring, testing, commissioning andvisualization functions in a single tool designed forthe entire xSystem product range.1System components •Modular PLCs –XC100 h8 DI, 6 DO, CANopen, RS 232, 4interrupt inputsSlot for multimedia memory card,64–256KByte program/data memory, 4/8KByte for retentive data, 0.5ms/1000instructions –XC200 g8DI,6DO, CANopen, RS 232, Ethernet, 2counters, 2 interrupt inputs, WEB/OPC server, USB, locally expandable with XI/OC I/O modules, 256–512 KByte program/data memory, 0.05 ms/1000 instructions •Text display PLCs–Modular text display PLCs aConsisting of XC100, up to 3XI/OC modules and LCD text display with 4 x 20 or 8x 40lines/characters–Compact text display PLC bMinimum mounting dimensions and high interface integration density (10DI, 8DO, 8DIO, 2AI, 2AO, 2 counter inputs, 2interrupt inputs, 1 encoder input)•XI/OC input/output modules c –Can be fitted to the XC100/200 (max.15modules)–Plug-in terminals with screw or springloaded terminal •XSoft–Programming, configuring,testing/commissioning in a single toolRefer to the following product overview and manuals for further information:–Automation product overview (AWB2700-7546)–XC100 hardware and engineering (AWB2724-1453)–XC200 hardware and engineering (AWB2724-1491)–XI/OC hardware and engineering (AWB2725-1452)–XV100 hardware and engineering (AWB2726-1461)–xStart-XS1 hardware and engineering (AWB2700-1426)–XSoft PLC programming (AWB2700-1437)–Function blocks for XSoft (AWB2786-1456); including data handling function blocks for text display PLCs The latest edition is available from/support : Enter the numbers shown in brackets, e.g.“AWB2725-1452G”, as a search term.1XI/ON – the conceptXI/ON is a modular I/O system for use in industrialautomation applications. It links sensors andactuators on the field level with the higher-levelcontroller. Fieldbus protocols PROFIBUS-DP,CANopen and DeviceNet are supported.XI/ON offers modules for virtually everyapplication:•Digital input and output modules•Analog input and output modules•Technology modulesA XI/ON station consists of a gateway, powersupply modules and I/O modules.A complete XI/ON structure counts as a single busstation in any fieldbus structure and therefore onlyrequires one bus address. The individual XI/ONperipheral modules are therefore independent ofthe higher-level fieldbus.The I/O modules consist of a combination of abase module designed as a terminal block, and aplug-in electronics module.The XI/ON peripheral modules are linked to thefieldbus via the XI/ON gateway. This is used forthe communication between the XI/ON stationand the other fieldbus stations.a Gatewayb Power supply modulec Electronics module in block designd Electronics module in slice designe End platef Base module in slice designg Base module in block designbadefcg1FlexibilityEach XI/ON station can be adapted exactly for the required number of channels since the modules are available in different levels of granularity.For example, digital input modules with 2, 4, 16 or 32 channels are available in slice or block design.A XI/ON station can contain modules in any combination. This enables the system to be adapted to virtually any application in industrial automation.Compact designThe narrow mounting width of the XI/ON modules (gateway 50.4 mm; slice 12.6 mm, block100.8mm) and the low mounting height make the system ideal for use in applications where space is at a premium.Simple handlingApart from the gateway, all XI/ON modules consist of a base module and an electronics module.The gateway and the base modules can be snap-fitted on mounting rails. The electronicsmodules can then be plugged simply onto the assigned base module.The base modules are available as terminal blocks. They are wired either with spring-loaded or screw terminals. The electronic modules can be fitted or removed during commissioning or for maintenance without disturbing the wiring.A design coding feature ensures that theelectronic modules can only be fitted at the correct locations provided.I/Oassistant diagnostics and engineering softwareThe I/Oassistant provides support during the entire planning and implementation phase of an I/O system. It provides help for engineering the stations, the configuration and for setting the parameters. The software is used forcommissioning systems and carrying out tests and diagnostics on the stations.The entire documentation for the station, including a parts list for ordering, can begenerated after the engineering phase.1xStart-XS1xStart-XS1 is the modular, networkable version ofthe tried and tested motor starter from Moeller. Itconnects the motors with the XI/ON system andthus ensures flexible availability between systems,irrespective of the fieldbus in use.xStart-XS1 offers DOL and reversing starters indifferent ratings and available with or without atrip-indicating auxiliary contact (AGM).The xStart-XS1 modules consist of a base moduleand a power module that contains the tried andtested PKZM0 motor-protective circuit-breakerand one or two DILEM contactors. They enable theconnection of assigned motor ratings up to 4.0 kWat a rated operational voltage U e of 400V AC.FlexibilityYou can adapt xStart-XS1 exactly to therequirements of the system used.xStart-XS1 can be used at any position on a XI/ONstation so that you can organise your stationconveniently into system areas.The motor can be disconnected at the machine byusing the rotary handle.MountingThe complete module is mounted by simplysnap-fitting it onto two top-hat rails. You can alsosimply mount the base module and add the powersection at a later time. Mounting and removal arecarried out without any tools.a XI/ON gatewayb Supply modulec XI/ON I/O modulesd xStart-XS1 DOLstarter modulee xStart-XS1 reversingstarter moduleab c cbd e d1Power supply accessories are available for reducing wiring costs. If several xStart-XS1 modules are mounted next to each other, the power can be fed via a distribution system. This power distribution is available for an operating current of up to 63 A.a Incoming terminal forthree-phase commoning linkb Three-phase commoning link forup to 4 DOL starters withouttrip-indicating auxiliary contactAGMc DOL starter without AGMtrip-indicating auxiliary contact c1Networking PS40 SeriesP R O F I B U S -F M SS u c o n e t P R O F I B U S -D P PS4-141-MM1PS4-151-MM1PS4-201-MM1PS4-271-MM1PS4-341-MM1PS416-BGT...PS416-CPU...PS416-POW...PS416-INP ...PS416-OUT...PS416-AIN...PS416-AIO...PS416-CNT-200PS416-TCS-200PS416-NET...PS416-COM-200PS416-MOD-200EM4-101-...EM4-111-...EM4-201-DX2LE4-104-XP1LE4-108-...LE4-116-...LE4-206-...LE4-308-...LE4-622-CX1LE4-501-BS1LE4-503-BS1CM4-504-GS1CM4-505-GS1ZB4-501-UM4S40Suconet K + RS 232Suconet K + RS 232Suconet K + RS 232Suconet K + RS 232Suconet K + RS 232Suconet K (M/S)Modbus(SI)Suconet K/K1Suconet K/K1Suconet K EM4-204-DX1PROFIBUS-DPSuconet KLE4-633-CX1PROFIBUS-FMS (Slave)Suconet K, PROFIBUS-DP GatewayM o d b u s 64 kByte 64 kByte64 kByte 64 kByte 512 kBytePart No.Interfaceserial interface interface converter Programming softwareMemory2 x3 counter3 x 3 path measurement1Networking xSystemXC200+ XIOCXC100+ XIOCXC100-XV + XV100A N o p e n x S y s t e mt h e r n e tR O F I B U S -D P u c o n e t K o d b u s XC6001Networking Display and Operator Devices120 X 321119C A N o p e n S u c o n e t E t h e r n e tP R O F I B U S -D P D e v i c e N e t 120 X 32120 X 64240 X 64240 X 64120 X 323527320 X 2405656 320 X 240640 X 480504646320 X 240––320 X 240640 X 480640 X 480320 X 240–––1024 X 768800 X 600––320 X 240–Part no DisplayResolution Code LCD monochrome LCD monochrome LCD monochrome LCD monochrome LCD monochrome LCD monochromeMonochrome STN colour TFTMonochrome STN colour TFT colour Monochrome TFT TFT TFThMonochrome H M I (D i s p l a y a n d o p e r a t i n g d e v i c e )1Networking Embedded HMI-PLCNote: The XVH- ... devices are also availablewith RS 232 or MPI interface.320 X 240C A N o p e n S u c o n e t E t h e r n e tP R O F I B U S -D P D e v i c e N e t 640 X 480320 X 240320 X 240320 X 240640 X 480640 X 480800 X 600800 X 6001024 X 7681024 X 768320 X 240Part no Infra-red DisplayResolution Touch Infra-redInfra-red Resistive Resistive Infra-red Resistive Infra-red Resistive Infra-red ResistiveInfra-red STN colour TFTSTN colour STN colourSTN colour TFT TFT TFT TFT TFT TFTSTN colour1Device arrangementInstall the rack and the PLC horizontally in thecontrol cabinet – as shown in the following figure.Terminal assignmentThe terminals for the power supply and the localI/O have the following assignment:Wiring example of power supply unitThe voltage terminal 0VQ/24VQ is only used forthe power supply of the local 8 inputs and 6outputs, and is potentially isolated from the bus.The outputs 0 to 3 can be loaded with 500mAand the outputs 4 and 5 with 1A, each with a100% duty factor (DF) and a simultaneity factorof 1.The wiring example shows the wiring with aseparate power supply for the PLC and the IOterminals. If only one power supply is used, thefollowing terminals must be connected:24 V to 24VQ and 0 V to 0VQ.a Clearance > 50 mmb Clearance > 75 mm fromactive elementsc Cable duct%IX 0.0%IX 0.1%IX 0.2%IX 0.3%IX 0.4%IX 0.5%IX 0.6%IX 0.7%QX 0.1%QX 0.3%QX 0.524 V Q0 V Q0 V24 V1RS 232 serial interfaceThis interface is used by the XC100 to communicate with the PC. The physicalconnection is implemented via an RJ 45 interface. The interface is not isolated. The connector has the following assignment:You can use the COM1 or COM2 interface on the PC.You use the XT-SUB-D/RJ45 programming cable for the physical connection.CANopen interfacewith the following properties:•Surge impedance 108 to 132 O•Capacitance per unit length < 50 pF/mPinDesignation Description4GND Ground 5TxD Transmit Data 7GND Ground 8RxDReceive DataH 0 V H Q H 0 V Q H87654321B a u d r a t e [K b i t /s ]L e n g t h [m ]C a b l e c r o s s s e c t i o n [m m 2]L o o p r e s i s t a n c e [O /k m ]2010000.75 – 0.8016 1255000.50 – 0.6040 2502500.50 – 0.6040 5001000.34 – 0.6060 1000400.25 – 0.3470CAN_H CAN_GNDCAN_L1PS4-151-MM1 compact PLC•Wiring for a 230 V AC supply circuit•Relay contacts with different potentials: 230 VAC and 24 V DC•24 V DC inputs from an external power supplyunit, earthed operation*Insulation monitoring must be providedwhere the control circuits are not earthed.(EN60204-1 and VDE0100-725)**IEC/EN 60204-1 specifies that a controltransformer is required.1PS4-201-MM1 compact PLC •Shared power supply for PLC and inputs/outputs •Non-earthed operation with insulation monitoring*For operation without insulation monitoring, 0 V must be linked with the PE potential in the control circuits.N1PS4-341-MM1 compact PLC•Shared power supply for PLC andinputs/outputs•Non-earthed operation with insulationmonitoring*For operation without insulationmonitoring, 0 V must be linked with the PEpotential in the control circuits.N1Engineering EM4 and LE4EM4-201-DX2 expansion module and LE4-116-XD1 local expansion •Inputs and outputs have a separate power supply•Earthed operation*Insulation monitoring must be provided where the control circuits are not earthed.Notes 1。

克罗韦尔 Armor Compact GuardLogix 控制器安装指南说明书

安装指南Armor Compact GuardLogix 控制器产品目录号 1769-L33ERMOS、1769-L36ERMOS、1769-L37ERMOS 主题页码关于Armor Compact GuardLogix 控制器3部件列表4所需组件4安装控制器4控制器接地5进行电源连接5打开机壳检修门5取出和安装内存卡6连接 USB 端口7进行网络连接7设置网络 IP 地址8更新控制器10创建控制器项目11状态指示灯11复位控制器12使用内存卡恢复控制器13更换熔断器13清洁控制器13技术参数14废弃电气和电子设备 (WEEE)14其他资源16Armor Compact GuardLogix 控制器ATTENTION:Read this document and the documents listed in the Additional Resources section about installation, configuration and operation of this equipment before you install, configure, operate ormaintain this product. Users are required to familiarize themselves with installation and wiring instructions in addition to requirements of all applicable codes, laws, and standards.Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by suitably trained personnel in accordance with applicable code of practice.If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.注意：在安装、配置、操作和维护本产品前，请阅读本文档以及“其他资源”部分列出的有关设备安装、配置和操作的相应文档。

GEK-114708 HMI软件用户手册 Vol. II-操作员站软件V1.0.pdf

目录第 1章XDPS-400e系统概述 (1)1概述 (1)1.1过程控制系统 (1)1.2网络系统 (1)1.3操作管理系统 (2)2操作员站 (2)3操作员站软件 (2)第 2章图形显示与操作 (5)1概述 (5)2功能 (5)3图形显示程序的启动 (5)4画面操作 (6)4.1测点显示 (6)4.2手操器调用 (6)5右键菜单 (7)6图形显示的界面设计 (10)6.1配置文件说明 (10)6.2配置文件举例 (11)7操作盘直调键设置 (11)第 3章数据库和单点信息 (12)1概述 (12)2启动 (12)3设置 (12)4界面及功能介绍 (13)4.1菜单栏 (13)4.1.1文件 (13)4.1.2编辑 (14)4.1.3视图 (15)4.1.4帮助 (17)4.2工具栏 (18)4.3过滤栏 (19)4.4标题栏 (19)4.5测点视图 (19)4.6状态栏 (19)5主要操作功能 (20)5.1测点过滤 (20)5.1.1临时测点过滤 (20)5.2测点浏览 (20)5.2.1选中行移动和视图翻页 (20)5.3单个测点查看 (20)5.3.1查找 (20)5.3.2单点 (21)5.4与系统其他模块协同工作 (22)5.4.1拷贝选中测点至系统的剪贴板 (22)5.5打印输出 (22)5.5.1打印机设置 (22)5.5.2打印预览 (22)5.5.3打印 (22)5.6辅助功能 (22)5.6.1定时器切换 (22)5.6.2测点状态标注 (23)6单点信息调用 (24)6.1从Netwin总控软件中调用 (24)6.2从画面显示中调用 (24)6.3从其它程序中调用 (24)6.4界面及功能介绍 (25)第 4章报警和事件 (27)1概述 (27)2报警一缆AlmLst (29)2.1界面及功能介绍 (29)2.2工具栏 (30)2.3过滤栏 (30)2.4标题栏 (30)2.5测点视图 (30)2.6状态栏 (30)2.7主要操作功能 (31)2.7.1测点过滤 (31)2.7.2命令行过滤 (31)2.8测点浏览 (31)2.8.1测点输出项目选择 (31)2.8.2选中行移动和视图翻页 (32)2.8.3单个记录查看 (32)2.9参与系统的调试和控制 (32)2.9.1在线确认单个报警测点 (32)2.9.2在线确认整页报警测点 (33)2.10打印输出 (33)2.11辅助功能 (33)3设置报警历史AlmHis (35)3.1概述 (35)3.2界面及功能介绍 (36)3.3工具栏 (36)3.4过滤栏 (36)3.5标题栏 (36)3.6记录视图 (37)3.7状态栏 (37)3.8主要操作功能 (37)3.8.1运行模式选择 (37)3.8.2记录过滤 (38)3.8.3命令行过滤 (38)3.9记录浏览 (38)3.9.1记录输出项目选择 (38)3.9.2选中行移动和视图翻页 (39)3.9.3单个记录查看 (39)3.10打印输出 (39)3.11辅助功能 (40)3.11.1定时器切换 (40)3.11.2记录状态标注 (40)3.11.3版本信息 (41)4事件触发报警TrigFig (41)4.1概述 (41)4.2配置文件的设置 (42)4.3界面及功能介绍 (46)4.4菜单栏 (47)4.4.1文件 (47)4.4.2视图 (47)4.4.3过滤 (48)4.5标题栏 (48)4.6记录视图 (49)4.7工具栏 (49)4.8过滤栏 (49)4.9状态栏 (49)4.10主要操作功能 (49)4.10.1记录过滤 (49)4.10.2记录浏览 (50)4.11打印输出 (51)4.11.1打印机设置 (51)4.11.2打印预览 (51)4.11.3打印 (51)4.12辅助功能 (51)4.12.1定时器切换 (51)4.12.2记录状态标注 (51)4.12.3版本信息 (52)第 5章实时趋势和历史趋势 (53)1概述 (53)2设置 (53)3界面及功能介绍 (54)3.1工具栏 (54)3.2趋势窗口 (54)3.3趋势点列表 (55)3.4状态栏 (55)4主要操作功能 (56)4.1趋势组 (56)4.1.2保存 (57)4.1.3趋势组定义 (57)4.1.4数值趋势图 (58)4.1.5显示网格 (58)4.2趋势点 (59)4.2.1趋势点定义 (59)4.2.2从数据一览中粘贴 (60)4.3实时趋势操作 (60)4.4历史趋势操作 (60)4.4.1修改时间参数 (60)4.4.2修改历史文件所在路径 (61)4.5趋势转换操作 (61)4.6打印操作 (61)第 6章报表再现 (63)1报表再现程序运行环境 (63)2报表再现程序界面 (63)2.1周期报表 (64)2.2用户自定义周期报表 (65)2.3追忆再现 (65)2.4SOE再现 (65)2.5事件型报表 (66)安全标识第 1章 XDPS-400e系统概述1 概述XPDS-400e系统可以分为三个最基本的组成部分：过程控制系统、网络系统和操作管理系统。

GE_KELMAN安装手册

GE KELMAN一、需要了解的一些资料1、重要特性TRANSFIX 是变压器油中溶解气体及微水在线监测系统，它被用来测量反映变压器状态分析的关键气体数值。

这些气体有：氢气、甲烷、乙烷、乙烯、一氧化碳、二氧化碳、氧气及乙炔。

TRANSFIX 也同样测量绝缘油中的水分含量及变压器负载电流。

TRANSFIX 从变压器绝缘油中取得气样并使用光声光谱技术分析气样。

这些数据被储存在设备内部并可以下载至电脑上。

关键特性●TRANSFIX 使用动态顶空脱气法从油样中获取目标气体。

●不需要消耗气体，例如载气等。

●可在一小时内测量出精确的结果，不需要因为薄膜平衡脱气法而等待数小时。

●安装后免维护。

●使用高精度及高稳定性的光声光谱技术。

●完全嵌入式微处理器及固态内部记忆体可存储10,000 条记录（采用1 小时的采样间隔至少可存储1 年的测量数据)。

●室外等级为NEMA 4X, IP55 的不锈钢外壳通过坚固的不锈钢钢管连接到变压器上。

●TRANSFIX 本体上提供手动采样口。

●所有气体测量装置均安装在TRANSFIX 内部，没有任何外部气体测量探头。

●可使用变压器负载监测。

●外壳表面上安装有一个红色及一个黄色的抗日光冲刷且用户可设定的LED指示灯，并且对于气体●及微水的绝对数值或气体变化率配有四个用户可设定的继电器输出。

●外壳上安装有一个绿色LED 电源指示灯及一个蓝色LED 维护灯。

●通讯选项包括：以太网、RS-232、移动电话Modem (GSM 或CDMA)、固定电话Modem、租用线路Modem、RS-485 及其他可选通讯方式。

●为调试及本地数据下载提供USB 连接。

2、对变压器的要求：变压器应该满足如下要求：●含有矿物类型油（石蜡或环烷烃）的变压器应满足IEC-60296、BS EN148、VDE 0370 或●ASTM D 3487 标准中规定的内容。

●变压器油内不含多氯联苯。

●变压器出油阀处的油温应该介于-10°C~120°C。

TEXECOM安装手册

所有防区选项 ..............................................................20 防区类型 ....................................................................20 防区接线 ....................................................................20 防区属性 1 ....................................................................20 防区属性 2 ....................................................................21 防区属性 3 ....................................................................21 防区属性 3 (按键开关) ....................................................21 防区分子系统和旁路组 .......................21 防区文本(仅限LCD)
..............................................................29 杂项选项 1 ....................................................................30 混杂选项 2 ....................................................................30 键盘选项 1 键盘选项 2 键盘选项 3 键盘选项 4 ....................................................................31 ....................................................................32 ....................................................................32 ....................................................................32

GE Grid Solutions Kelman Transport X

GEGrid Solutionsgimagination at workDissolved Gas Analysis (DGA) and moisture measurement of insulating fluids are recognized as the most important tests for condition assessment of fluid-insulated transformers. Every year asset owners deploy field crews to take thousands of fluid samples from transformers as part of periodic health checks and for immediate operational decisions. These samples are sent to offsite laboratories for analysis. Kelman™ Transport X² is a portable ‘lab in a box’ delivering detailed analysis with dramatically reduced turnaround times. In critical situations, the ability to perform DGA in less than 30 minutes on the spot, empowers asset owners to determine a transformer’s condition onsite and thereby allow operational decisions to be made at the earliest opportunity.GE was the first to deliver consumable-free DGA products to the market and the Transport X² represents the next generation of its portable system. GE’s class leading Photo-acoustic spectroscopy (PAS) gas measurement technology, now in its fourth generation, provides laboratory-challenging levels of precision in a calibration free, easy-to-use and hand-carriable product.Benefiting from over 40 years of global DGA experience, the Transport X² encapsulates intuitive advancements to bring improved performance, innovative new features, enhanced user experience and greater robustness.Key Benefits• Measurement of seven diagnostic gases and moisture content in the oil • Fast diagnostics in less than 30 minutes• Intuitive touchscreen interface with step-by-step instructions and Plug and Play connectivity • Compatible with mineral insulating oils and newer ester-based fluids (natural and synthetic)• Enables operators to effectively respond to alarms, trip events and supports on-site field decision making • Ideal companion to GE’s range of single gas online DGA monitors for adding transformer diagnosticsApplicationsAs the average age of generation, transmission and distribution transformers increases, the risk of rapid deterioration and even catastrophic failures also increases. Transformer changes can occur in between rounds of periodic laboratory DGA analysis and this risk exposure can go unnoticed. The Transport X² offers electric utility and industrial customers accurate, economical and portable DGA and diagnostics in an easy-to-use handy instrument that is applicable for:Fully PortableKelman Transport X ²Portable Onsite DGA• Mission critical industrial transformers • Distribution transformers • Buchholz relay gas• Tap changer tanks • Instrument transformers • Oil filled circuit breakersYEAR WARRANTY5gimagination at workGE Grid SolutionsLissue Industrial Estate East Unit 1, 7 Lissue Walk Lisburn BT28 2LU United KingdomTel: +44 (0) 2892 622915GE, the GE monogram, Kelman, Hydran and Perception are trademarks of the General Electric Company.GE reserves the right to make changes to specifications of products described at any time without notice and without obligation to notify any person of such changes.© Copyright 2018, General Electric Company. All Rights Reserved.Technical SpecificationKelman-Transport-X2-DGA-brochure-EN-2018-07-33118A-A4Application ExampleThe Kelman Transport X² remains your ideal partner for use inconjunction with GE's range of single gas online DGA monitors. Theseunits (such as Hydran™ 201Ti and Hydran M2-X) monitor the transformerand raise an alarm when an abnormal level of fault gas is reached orwhen the rate of change of this gas level increases rapidly so that you can take action and protect your transformer early in the process.Such events often require further investigation before a valid conclusion can be reached. Traditional methods require an oil sample to be sent to alaboratory for analysis. This can be a lengthy process before a diagnosis and related decision can be made. However, with the Transport X²,the sample can be taken and analyzed onsite, giving comprehensivediagnostic information in less than 30 minutes. The Transport X² datacan then be uploaded and visualized in GE's powerful Perceptionsoftware alongside the readings from the online monitor.MEASUREMENT RANGE Hydrogen (H₂)5 – 5,000 ppm Carbon Monoxide (CO) 2 – 50,000 ppm Carbon Dioxide (CO₂) 40 – 50,000 ppm Methane (CH₄) 2 - 50,000 ppm Acetylene (C₂H₂) 0.5 - 50,000 ppm Ethane (C₂H₆) 2 - 50,000 ppm Ethylene (C₂H₄)2 - 50,000 ppmMeasurement Accuracy*±5% or ±LDL (whichever is greater)Moisture (H₂O)0-100% relative humidity Moisture in Oil Accuracy±3%*Accuracy quoted is the accuracy of the detectors duringcalibration; gas-in-oil measurement accuracy may be affected by sampling, oil type, environmental conditions and/or product usage cycle.Note: For Buchholz gas samples, LDL is 50 ppm, accuracy is ±30%, for all gases.TECHNOLOGYAutomated headspace gas extractionPhoto-acoustic spectroscopy (PAS) gas measurements (4th gen.)Thin film capacitive moisture sensorOil and Buchholz gas injection utilizing syringes Mineral oil and ester fluid (natural & synthetic)Robust design and portable ENVIRONMENTOperating Ambient Temperature5 – 50 °C (+41 to +122 °F)Operating Altitude Maximum 2,000m Operating Pressure 760 - 1040 millibarPower Supply 115 – 230 V AC 50/60 Hz; 40 W EnclosureIP67 (when closed)IP20 (when operating)Oil Sample Volume 50 ml (Oil)Gas Sample Volume 5 ml (Buchholz Gas)Dimensions 429 mm x 328 mm x 236 mm (16.9 in. x 12.9 in. x 9.3 in.)Weight9 kg (20 lb)FEATURES LCD Size 6.5 inch color touchscreen LCD TypeResistive touchscreenScreen Resolution 640 x 480Computer interfaceUSBMeasurement Download USB 2.0 Memory Stick Direct Perception SyncLogfile Retrieval USB 2.0 Memory Stick and PerceptionOutput CSV file format and Screen Hardcopy2 inch thermal printerOnboard DiagnosticsDuval’s triangle, Rogers’ ratio,Key Gas & Japanese ETRAADDITIONAL OPTIONSGas check kit for verification of ongoing accuracy Kit for collection and analysis of Buchholz gas samples Transit case provides extra protection during air travel and harsh environment transportation (IP67 rating when closed)Sample cooler box to rapidly cool hot oil samples for immediate analysis, doubles as a secure sample transportation containerBuchholz KitB0Not RequiredB1KITT00005Buchholz Kit for Buchholz Gas Measurements。

戴尔OpenManage管理站软件7.1安装指南说明书

Dell OpenManage Management Station Software Version 7.1 Installation GuideNotes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.WARNING: A WARNING indicates a potential for property damage, personal injury, or death.© 2012 Dell Inc.Trademarks used in this text: Dell™, the Dell logo, Dell Precision™ , OptiPlex™, Latitude™, PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, Compellent™, KACE™, FlexAddress™, Force10™ and Vostro™ are trademarks of Dell Inc. Intel®, Pentium®, Xeon®, Core® and Celeron® are registered trademarks of Intel Corporation in the U.S. and other countries. AMD®is a registered trademark and AMD Opteron™, AMD Phenom™ and AMD Sempron™ are trademarks of Advanced Micro Devices, Inc. Microsoft®, Windows®, Windows Server®, Internet Explorer®, MS-DOS®, Windows Vista® and Active Directory® are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat® and Red Hat®Enterprise Linux® are registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell® and SUSE® are registered trademarks of Novell Inc. in the United States and other countries. Oracle® is a registered trademark of Oracle Corporation and/or its affiliates. Citrix®, Xen®, XenServer® and XenMotion® are either registered trademarks or trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware®, Virtual SMP®, vMotion®, vCenter® and vSphere® are registered trademarks or trademarks of VMware, Inc. in the United States or other countries. IBM® is a registered trademark of International Business Machines Corporation.2012 - 06Rev. A00ContentsNotes, Cautions, and Warnings (2)1 About (5)Dell Systems Management Software DVDs (5)Dell OpenManage Subscription Service Kit DVDs (5)Managed System and Management Station (5)Dell Systems Management Tools and Documentation DVD (5)Managed System Software (6)Management Station Software (6)Dell Server Updates DVD (7)Dell Management Console DVD (7)Installing Management Station Software on Windows (7)Installing Management Station Software on Microsoft Windows Server 2008 Core and Microsoft Hyper-V Server (8)Installing Management Station Software in CLI Mode (8)Uninstalling Management Station Software in CLI Mode (9)Installing Management Station Software on Supported Red Hat Enterprise Linux, SUSE Linux EnterpriseServer, and VMware ESX Server (9)4AboutThe Dell OpenManage Management Station Software Installation Guide provides an overview of the Dell OpenManage management station software and installation instructions for the same. For information on installing Dell OpenManage Server Administrator, see the Dell OpenManage Server Administrator Installation Guide at /manuals.Dell Systems Management Software DVDsThe Dell systems management software comprises three DVDs, and they are:•Dell Systems Management Tools and Documentation DVD•Dell Server Updates DVD•Dell Management Console DVDFor information on the Dell systems that support systems management software, the operating systems supported by these systems, and the Dell OpenManage components that you can install on these systems, see the Dell Systems Software Support Matrix at /manuals.Dell OpenManage Subscription Service Kit DVDsThe Dell OpenManage subscription service kit is a collection of two DVDs and they are:•Dell Systems Management Tools and Documentation DVD•Dell Server Updates DVDFor more information on the subscription service, see /openmanagesubscription or contact your sales representative.Managed System and Management StationDepending on the way you use the Dell systems management tools, you can classify the systems as:•Managed SystemA managed system is any system that is monitored and managed using Dell OpenManage Server Administrator(one of the systems management tools on the Dell Systems Management Tools and Documentation DVD) or Dell Management Console. You can manage systems running Server Administrator locally or remotely through asupported web browser. For more information on Server Administrator, see the Dell OpenManage ServerAdministrator User's Guide on /manuals or on the Dell Systems Management Tools andDocumentation DVD.•Management StationA management station is a laptop, desktop, or server that you use to remotely manage one or more managedsystems from a central location.Dell Systems Management Tools and Documentation DVDThe Dell Systems Management Tools and Documentation DVD contains the Dell OpenManage systems management software. This software is a suite of applications for the Dell systems. The software helps you to manage the systems by monitoring the system components, diagnosing issues, notifying through alerts, and troubleshooting remotely.5Dell OpenManage systems management software is classified into managed system software and management station software.Managed System SoftwareThe following applications comprise the Dell OpenManage managed system software:•Dell OpenManage Server Administrator•Local Remote Access Controller•Storage Management ServiceManagement Station SoftwareThe following applications comprise the Dell management station software that you can install using the Dell Systems Management Tools and Documentation DVD:•Active Directory Snap-InThe Active Directory Snap-In utility provides an extension snap-in to the Microsoft Active Directory to manage Dell-specific Active Directory objects. The Dell-specific schema class definitions and the installation packages for these definitions are on the DVD. You can install the Active Directory Snap-In utility after adding the Dell-specific schema classes to the Active Directory schema.•BMC UtilitiesBMC Management Utility (BMU) is a utility that provides remote management and configuration of systemsequipped with a Baseboard Management Controller (BMC) or iDRAC using the IPMI protocol. For moreinformation on BMU, see the Dell OpenManage Baseboard Management Controller Utilities User's Guide at/manuals.•DRAC ToolsThe Dell Remote Access Controller (DRAC) console is a management station software designed to provideremote management capabilities for the Dell systems. You can remotely connect to the Remote AccessController (RAC) hardware and access the RAC features either by using a web browser or the RACADMCommand Line Interface (CLI). RACADM CLI is the command line user interface to the Remote Access Controller (RAC).You can install DRAC either on the managed system or on the management station.For information on installing DRAC on the managed system, see the Dell OpenManage Server AdministratorInstallation Guide. For information on installing the Remote Access Controller on the management station, see Installing Management Station Software on Windows. For more information on RAC, see the Dell RemoteAccess Controller User's Guide at /manuals.•IT AssistantDell OpenManage IT Assistant provides a central point of access to monitor and manage systems on a network.By allowing an administrator a comprehensive view across the enterprise, IT Assistant can increase systemuptime, automate repetitive tasks, and prevent interruption in critical business operations. You can install ITAssistant on Windows 7 (64-bit) and Windows Server 2008 R2 systems. IT Assistant can be installed on virtual machines running on ESX/ESXi.For information on using IT Assistant, see the Dell OpenManage IT Assistant User's Guide at / manuals.•Dell Systems Build and Update UtilityYou can use the Dell Systems Build and Update Utility to:–Update the system firmware and install an operating system.6–Update the firmware and BIOS on multiple systems in a pre-operating system environment.–Configure the system hardware.–Customize the Server Update Utility (SUU) and use it to update the system.For information on performing these tasks and details on the Dell Systems Build and Update Utility, see the Dell Systems Build and Update Utility User's Guide at /manuals.Dell Server Updates DVDThe Dell Server Updates DVD is a part of the Dell OpenManage subscription service kit along with the Dell Systems Management Tools and Documentation DVD. The Dell Server Updates DVD is available only to customers who have subscribed to the subscription service.The Dell Server Updates DVD contains Dell Update Packages (DUPs) and Dell OpenManage Server Update Utility (SUU). DUPs allow administrators to update a wide range of system components simultaneously and apply scripts to similar sets of Dell systems to update system software components to the same version levels.SUU is an application that identifies and applies updates to the system. You can use SUU to update the Dell system or view the updates available for any system supported by SUU.In addition to installing, configuring, and updating programs and operating systems, the Dell Server Updates DVD also provides newer versions of software for the system.For more information on DUPs and SUU, see the Dell Update Packages User's Guide and the Dell OpenManage Server Update Utility User's Guide respectively at /manuals.Dell Management Console DVDThe Dell Management Console is a web-based systems management software that enables you to discover and inventory devices on the network. It also provides advanced functions, such as health and performance monitoring of networked devices and patch management capabilities for Dell systems.The Dell Management Console DVD is available with all Dell PowerEdge yx0x and later systems. You can also download the Dell Management Console from /openmanage.Installing Management Station Software on Windows1.Log on with administrator privileges to the system on which you want to install the management stationapplications.2.Insert the Dell Systems Management Tools and Documentation DVD into the DVD drive or download the webinstaller from .3.Run autorun.exe.NOTE: If you are using the DVD to install, select the management station application that you want to install, and click Install.4.Follow the instructions in the InstallShield Wizard.NOTE: You cannot install remote RAC (RAC installed on the management station) and local RAC (RAC installed on the managed system) on the same system.NOTE: The Dell OpenManage IT Assistant option is displayed only if you have installed an earlier version of IT Assistant. Here, selecting the Dell OpenManage IT Assistant option upgrades IT Assistant to version 8.9.1. For more information on upgrading IT Assistant, see the Dell OpenManage IT Assistant User's Guide.7Installing Management Station Software on Microsoft Windows Server 2008 Core and Microsoft Hyper-V ServerThe Server Core installation option of the Microsoft Windows Server 2008 and the Hyper-V Server operating system provides a minimal environment for running specific server roles which, reduces the maintenance and management requirements and the attack surface for those server roles. The Server 2008 Core or Hyper-V Server installation installs only a subset of the binaries that are required by the supported server roles. For example, the Explorer shell is not installed as part of a Windows Server 2008 Core or Hyper-V Server installation. Instead, the default user interface for a Windows Server 2008 Core or Hyper-V Server installation is the command prompt.Windows Server 2008 Core or Hyper-V Server operating system does not support a graphical user interface (GUI) based installation of Dell OpenManage software components. Install Dell OpenManage software in CLI mode on Server Core. For more information on Server Core, see the Microsoft website.NOTE: Log in as a built-in Administrator to install systems management software on Windows Server 2008 and Windows Vista. For more information on built-in Administrator account, see the Windows Server 2008 Help.Installing Management Station Software in CLI ModeTo install the DRAC Tools from the command prompt, launch the MSI file using the command: msiexec /i DRAC.msiNOTE: The DRAC.msi file is located at SYSMGMT\ManagementStation\windows\DRAC on the Dell SystemsManagement Tools and Documentation DVD.To install BMU from the command prompt, launch the MSI file using the command: msiexec /i BMC.msiNOTE: The BMC.msi file is located at SYSMGMT\ManagementStation\windows\BMC on the Dell SystemsManagement Tools and Documentation DVD.To install Active Directory Snap-In from the command prompt, launch the MSI file using the command: msiexec /i ADSnapIn.msiNOTE: The ADSnapIn.msi file is located at SYSMGMT\ManagementStation\windows\ADSnapIn on the DellSystems Management Tools and Documentation DVD.To install IT Assistant from the command prompt, launch the MSI file using the command: msiexec /i ITA.msiNOTE: The ITA.msi file is located at SYSMGMT\ManagementStation\windows\ITAssistant on the Dell Systems Management Tools and Documentation DVD.To install the localized version of the management station software, at the command prompt type the following: msiexec / I <management_station_software>.msi TRANSFORMS=<languauge_transform>.mstNOTE: Replace <language_transform>.mst with the appropriate language file:•1031.mst (German)•1034.mst (Spanish)•1036.mst (French)•1041.mst (Japanese)•2052.mst (Simplified Chinese)8Uninstalling Management Station Software in CLI ModeTo uninstall management station software, run the commands as listed in the table below.Table 1. Commands to Uninstall Management Station SoftwareInstalling Management Station Software on Supported Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESX ServerOnly DRAC tools and BMU are supported on the Red Hat Enterprise Linux, SUSE Linux Enterprise Server, and VMware ESX Server operating systems.On systems running Red Hat Enterprise Linux 5 operating system, DVDs are auto-mounted with the -noexec mount option. This option does not allow you to run any executable from the DVD. You must mount the DVD-ROM manually and then run the executables.To install BMU, navigate to the SYSMGMT/ManagementStation/linux/bmc directory and install the BMU RPM specific to the operating system as follows:•For systems running Red Hat Enterprise Linux, type rpm -ivh osabmcutil*-RHEL-*.rpm•For systems running SUSE Linux Enterprise Server, type rpm -ivh osabmcutil*-SUSE-*.rpmTo install the latest version of DRAC Tools:1.Uninstall the existing IPMI tool:a.Query the existing IPMI tool: rpm -qa | grep ipmitoolIf the IPMI tool is already installed, the query returns ipmitool-x.x.xx-x.x.xx.b.To uninstall the IPMI tool:*On systems running SUSE Linux Enterprise Server and VMware ESX Server, type rpm -e ipmitool-x.x.xx-x.x.xx*On systems running Red Hat Enterprise Linux 5.x, type rpm –e OpenIPMI-tools*On systems running Red Hat Enterprise Linux 6.x, type rpm –e ipmitool2.Navigate to the SYSMGMT/ManagementStation/linux/rac/<OS> directory and type rpm -ivh *.rpm9。

罗克韦尔自动化 Guardmaster 442G 多功能通道保护锁安装说明书

多功能访问控制箱安装说明英文原版说明本文档所述产品符合欧盟机械指令的基本健康与安全要求 (EHSR)。

符合性声明和认证：/certification/overview.page其他资源开关上的 QR 代码提供到 442G Multi-functional Access Box User Manual (442G-UM001A-EN-P) 的链接。

可访问 /literature/ 查看或下载出版物。

如需订购技术文档的纸印本，请联系当地的Allen-Bradley® 分销商或罗克韦尔自动化销售代表。

Guardmaster 442G 多功能通道保护锁是一种带保护锁的电磁互锁设备。

该设备由一个锁定模块和一个手柄组件构成。

逃生释放为可选组件。

该设备提供的防护位置监视及锁定监视符合ISO 14119。

注意：在安装、配置、操作或维护本产品前，请阅读本文档和“其他资源”部分列出的文档，了解本设备的安装、配置和操作相关信息。

用户除了需要熟悉安装和接线指南之外，还需要熟悉所有适用规范、法规和标准的相关要求，其中包括：•ISO 14119：与防护装置有关的互锁设备；•ISO 14120：防护装置设计、构造和选择的一般要求；•ISO 13855：确定安全防护装置的位置；•ISO 13857：计算最短（安全）距离；•对于功能安全，要熟悉 IEC 62061 或 ISO 13849-1 及 ISO13849-2 的相关要求；•以及其它适用的标准。

安装、调整、运行、操作、装配、拆卸和维护等活动均要求由经过适当培训的人员遵照适用的实施规程执行。

本设备是机器安全相关控制系统的一部分。

设备选型不当或安装不当会影响安全相关控制系统的完整性。

首先，必须执行风险评估，确定此设备的技术参数是否适合实际应用中所有可预见的工作和环境特性。

选用适当的螺丝、螺栓或螺母并借助相关工具安装开关和执行器，以避免损坏风险。

请勿对安装零件施加过大扭矩。

Greenheck安装说明书

InstallatIon supplements Refer to the appropriate Greenheck installationDue to continuing research, Greenheck reserves the right to change specifications without notice.Document number 461338smD-XXX, smD-XXXv, sesmD-XXX,sssmD-XXX,smDRXXX, sesmDR-XXX,and sssmDR-XXX moDelsLeakage Rated Smoke DampersVertical or Horizontal Mount Installation, Operation and Maintenance Instructions ®table of ContentsPre-Installation Guidelines (2)Installation (3)• Smoke Damper Requirements (3)• Location of Damper in Ductwork (3)• Attaching Damper to the Duct (3)• Installing Multiple Damper Section Assemblies (3)• Sealing the Installation (3)• Actuator Connections (3)• Connection and Operation of Open/Close Indicator (3)SMDR-XXX and SSSMDR Blade Orientation (4)Maintenance (4)Troubleshooting (4)pre-Installation GuidelinesThe basic intent of a proper installation is to secure the smoke damper in, not to, the opening or duct in such a manner as to prevent distortion and disruption of damper operation. The following items will aid in completing the damper installation in a timely and effective manner.1) Lift or handle damper using sleeve or frame. Do not lift damper using blades or actuators.2) Damper (rectangular) has label on outside of sleeve indicating a ‘No Screw’ area. Do not install screws into this area asscrews may interfere with unexposed blade linkage and prevent damper blades from opening and/or closing.3) Damper must be installed into duct or opening square (round) and free of twist or other misalignment. Damper must notbe squeezed or stretched into duct or opening. Out of square, out of round, racked, twisted or misaligned installations can cause excessive leakage and/or torque requirements to exceed damper/actuator design.4) Damper and actuator must be kept clean and protected from dirt, dust and other foreign materials prior to and afterinstallation. Examples of such foreign materials include but are not limited to:a) Mortar dustb) Drywall dustc) Firesafing materialsd) Wall texturee) Paint overspray5) Damper should be sufficiently covered as to prevent overspray if wall texturing or spray painting will be performed within5 feet of the damper. Excessive dirt or foreign material deposits on damper can cause excessive leakage and/or torquerequirements to exceed damper/actuator design.6) Caulking is not necessary, however, may be applied to optional retaining angles.7) The Code Authority Having Jurisdiction (AHJ) must evaluate and provide approval of final installation where variations toRatInGsIntegral switch type: Single Pole, double throw electrical: 10 Amps, 1/3 hp, 120 or 240 Vac1/2 Amp, 120 Vdc; 1/4 Amp 240 Vdc 5 Amps, 120 Vac “L” (lamp load) 1.0 Amps, 24 Vac 1.5 Amps, 24 Vdc3. attaCHInG DampeR to tHe DuCtAttach the damper to the duct using #10 sheet metal screws, 1/4 in. (6mm) diameter bolts and nuts, tack or spot welds, or 3/16 in. (5mm) diameter steel pop rivets. Attachments must be made at each flange spaced a maximum of 6 in. (152mm) on centers and a maximum of 2 in. (51mm) from corners on rectangular dampers, and on round dampers as follows: Ducts 22 in. (559mm) in diameter and smaller shall have three attachments. Ducts larger than 22 in. (559mm) in diameter up to and including 36 in., (914mm) have five attachments.4. InstallInG mul tIple DampeR seCtIon assemBlIesThe damper assembly is not restricted to a maximum number of sections, but must not exceed the section sizes and assembly sizes shown below.The damper sections must be attached together with #10 sheet metal screws, 1/4 in. (6mm) diameter nuts and bolts, 1/2 in. (13mm) long welds, or 3/16 in. (5mm) diameter steel pop rivets.On multiple section damper assemblies, the temperature rating of wiring run in the airstream shall be at leastequal to the damper temperature rating plus 50°F (10°C).5. sealInG tHe InstallatIonAfter installing the damper in the ductwork, seal the joint between the damper frame and the duct using Dow Corning RTV 732 sealant, GE1200 series silicone construction adhesive or Component Hardware SLT -5000 silicone sealant. Make sure to press the sealant into the joint to guarantee a proper seal. Use the minimum amount of material required to completely seal the joint. See Figure 1.6. aCtuatoR ConneCtIonsElectrical and/or pneumatic connections to damper actuators should be made in accordance with wiring and piping diagrams developed in compliance with applicable codes, ordinances and regulations.7. ConneCtIon anD opeRatIon of open/Close InDICatoR o CI - The OCI (open or closed indicator) option contains a single pole, double throw switch used to indicate the damper blade position. The switch provides a positive open or closed signal when used in conjunction with remote indicator lights. Refer to Fig. 2 for wiring of the OCI option.Damper maintenanceDampers do not typically require maintenance as long as they are kept dry and clean. If cleaning is necessary, use mild detergents or solvents. If lubrication is desired for components such as axle bearings, jackshaft bearings and jamb seals, do not use oil-based lubricants or any other lubricants that attract contaminants such as dust.Damper actuator(s) must be maintained, cycled, and tested in accordance with:• The latest editions of NFPA 90A, 92A, 92B, 105, UL864, AMCA 503-03 and local codes.• Actuator manufacturer recommendations.4Damper troubleshootingThe following is a possible cause and correction list for common concerns with the dampers.SymptonPossible CauseCorrective ActionDamper does not fully open and/or closeFrame is 'racked' causing blades to bind on jamb seals Adjust frame such that it is square and plumb Actuator linkage looseClose damper, disconnect power, adjust and tighten linkage Defective motor ReplaceScrews in damper linkage Damper installed too far into wall. Move out to line as designated on damper labelContaminants on damperClean with a non-oil based solvent (see Damper Maintenance)RRL or TOR sensor trippedHeatPush reset button located on backside of RRL or TOR Damper does not oper-ateNo power supplied to the actuatorAdd power supply461338• Smoke Dampers IOM Rev. 11, October 2012Copyright 2012 © Greenheck Fan Corporation®Phone:(715)359-6171•Fax:(715)355-2399•E-mail:*********************•Website:Our Commitment。

戴尔OpenManage部署工具包安装指南.pdf_1701139568.517306说明书

Dell OpenManage Deployment Toolkit Installation GuideNotes and CautionsNOTE: A NOTE indicates important information that helps you make better use of your computer.____________________Information in this publication is subject to change without notice.© 2012 Dell Inc. All rights reserved.Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.Trademarks used in this text: Dell™ and OpenManage™, are trademarks of Dell Inc. Red Hat Enterprise Linux® and Enterprise Linux® are registered trademarks of Red Hat, Inc. in the United States and/or other countries. SUSE ™ is a trademark of Novell Inc. in the United States and other countries. Microsoft®, Windows®, Windows Vista® and Windows® 7 are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Linux®is a registered trademark of Linus Torvalds.Other trademarks and trade names may be used in this publication to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.2012 – 03IntroductionThe Dell OpenManage Deployment Toolkit (DTK) includes a set of utilities, sample scripts, and sample configuration files that you need, to deploy and configure your Dell system. Y ou can use DTK to build script-based and RPM-based installation for deploying large number of systems on apre-operating system environment in a reliable way, without changing their current deployment processes.Documents You Will Need•Dell OpenManage Deployment T oolkit Command Line Interface Reference Guide•Dell OpenManage Deployment T oolkit User’s Guide•Operating system documentationFor a complete list of supported operating systems, BIOS firmware, and hardware, see the Dell Systems Software Support Matrix available at /manuals→Software→Systems Management→Dell OpenManage Releases. Click the appropriate product version to access the Support Matrix.PrerequisitesBefore using DTK to deploy Microsoft Windows Pre-installation Environment (PE) or embedded Linux environment (Red Hat Enterprise Linux or SUSE Linux Enterprise Server), ensure you have the following prerequisites:Table 1-1.Prerequisites for InstallationWindows PE Environment Embedded Linux EnvironmentThe DTK self-extracting zip file (DTKX.X-WINPE-XX.exe) available at .The DTK ISO image available at .A Windows workstation that has at least 512 MB of RAM.A workstation that has at least 512 MB of RAM.Quick Installation Guide3Deployment OverviewDTK offers a complete set of utilities, sample scripts, and RPM packages that can be used to automate the deployment of Dell systems.Before running the deployment, ensure that you create specific deployment media to facilitate the deployment method you choose. For more information, see the Dell OpenManage Deployment T oolkit User’s Guide available on /manuals→Software→Systems Management→Dell OpenManage Deployment Toolkit.Deployment PrerequisitesBefore beginning the deployment process for Windows PE, ensure that you have all of the following tools, software, and information ready to use or consult:•Windows Automated Installation Kit (AIK) 1.1 released with Microsoft Windows Vista SP1 and Windows Server 2008 to build Windows PE 2.0.•Windows AIK for Windows 7 to build Windows PE 3.0.•An unzip utility.•Working knowledge to build Windows PE 2.0 and Windows PE 3.0 (See the Microsoft documentation to customize Windows PE).•Working knowledge of Microsoft Remote Installation Services (RIS) and Automated Deployment Services (ADS) (including setting up of RIS and ADS environments) or any other third party deployment system or tool for Windows PE.•Working knowledge of Windows Deployment Services (WDS) or any other third party deployment system or tool for Windows PE.• A workstation with the following capabilities:–Writable media drive–Network access• A target system with a media drive, if performing a local deployment.• A target system with a media drive and network access, if performing a network deployment.•All DTK utilities, sample scripts, and sample configuration files.•Dell Systems Management Tools and Documentation DVD.4Quick Installation GuideQuick Installation Guide 5•Y our operating system software and documentation.•An optimally configured source system with network access. NOTE: You can also download the latest drivers from .For embedded Linux, ensure that you have all of the following tools, software, and information ready to use or consult:•Advanced knowledge of Linux and Linux scripting (bash), Linux networking, installing and working with RPM Package Managers (RPMs), and creating and modifying loop file systems.•Any third party deployment system or tool.• A workstation with the following capabilities:–A writable media drive –Network access •A target system with a media drive, if performing a local deployment.•A target system with a media drive and network access, if performing a network deployment.•All DTK utilities, sample scripts, sample configuration files, and RPM packages.•All operating system RPM packages that DTK RPMs require.NOTE: Tools such as Yellowdog Updater Modified (YUM), Yet Another Setup Tool (YAST), and Advanced Packaging Tool (APT) can be used to manage RPM dependency issues.•All other utilities and files necessary to perform the deployment, including all required Linux drivers, operating system drivers, and the Dell utility partition file.•Dell Systems Management Tools and Documentation DVD.•Y our operating system software and documentation.•An optimally configured source system with network access.NOTE: You can download the latest drivers from .6Quick Installation GuidePreparing for DeploymentIf you are using the Windows PE environment:1Copy or extract DTK utilities, sample scripts, sample configuration files, and drivers provided (in the zip file) to the Windows PE image.2Organize DTK utilities, script files, configuration files, the operating system installation files, and the requisite system files and drivers on a network share or local media.3Set up a Source System by using the Dell Systems Build and Update Utility (to install your operating system) and the Systems Service and Diagnostics Tools (to load drivers). The Source System acts as a masterserver that is used to replicate settings to the T argetServers .NOTE: You can also download the latest drivers from the Dell Support website at .4Generate a system BIOS, BMC, RAID, and/or RAC configuration profile from the Source System . Copy the generated configuration files to a read/write share on the workstation or server.NOTE: You can obtain the system BIOS, BMC, RAID, and/or RAC configuration files by booting from DTK Windows PE image and running the SYSCAP .BAT , RAIDCAP .BAT , and RACCAP .BAT scripts. 5Create an operating system answer file that contains unattended operating system software installation information.6Edit DTK sample script files that access the system configuration files to set up the system BIOS, BMC, RAID, and RAC and then, install an operating system on a Target Server .If you are using the embedded Linux environment:1Obtain the DTK Linux ISO image, which is a self-contained bootable ISO image.2Use and customize the sample scripts as per your requirements.3Set up a Source System by using the Systems Build and Update Utility on the Dell Systems Management T ools and Documentation DVD (to install your operating system) and the Systems Service and Diagnostics Tools (to load drivers).NOTE: You can also download the latest drivers from the Dell Support website at .4Generate a system BIOS, BMC, RAID, and/or RAC configuration profile from the optimally configured source system. Copy the generatedconfiguration files to a read/write share onto the workstation or server.NOTE: You can obtain the system BIOS, BMC, RAID, and/or RAC configurationfiles by booting from DTK Linux ISO image and running the syscap.sh,raidcap.sh, and raccap.sh scripts.5Create an operating system answer file that contains unattended operating system software installation information.6Install an operating system on a T arget Server.DeployingTo proceed with deployment, ensure that you have prepared all scripts, files, and utilities. Y ou can deploy the Win PE and embedded Linux using one of the following methods:•Deploy using removable boot media with a network connection (media-based)•Deploy using removable boot media without a network connection (media-based)•Network-based deployment (remote)For information on these methods, see the Dell OpenManage DeploymentT oolkit User’s Guide available on /manuals→Software→Systems Management→Dell OpenManage Deployment Toolkit.Upgrading Your DTK VersionWhen upgrading from a previous release of DTK, ensure that you create the environment for new DTK version separately from the previous version. This step is necessary because the environments and requirements for the new DTK versions are completely different.Quick Installation Guide78Quick Installation Guide。

Dell OpenManage 软件快速安装指南.pdf_1701150311.9214437说明书

注：要查看运行于 Red Hat Enterprise Linux 或 SUSE Linux Enterprise Server 操作系统的说明文件，请在 Dell Systems Management Tools and Documentation DVD 上启动位于 <system_drive>\docs\<language_directory> 处的 index.htm。
在管理型系统上安装 Systems Management Software 在管理站上安装 Systems Management Software 更新驱动程序和公用程序安全修补程序和热修复程序获得技术帮助
Dell Systems Management Tools and Documentation DVD 上提供有英语、法语、德语、西班牙语、日语以及简体中文版的《Dell OpenManage 软件快速安装指南》。
本地和远程系统管理
RAC
（CMC、iDRAC、DRAC 5、DRAC 4、DRAC III、DRAC III/XT 、DRAC/MC 、ERA 、ERA/O 和 ERA/MC）
Dell Systems Management Tools and Documentation DVD
位于 <system_drive>\SYSMGMT\ManagementStation\windows\ManagementStation 目录。在 Linux 系统中的目录是 SYSMGMT/ManagementStation/linux/rac
返回页首
Dell OpenManage 订购服务套件
Dell OpenManage 签署服务套件仅供签署服务的客户使用，该套件位于以下两张 DVD 中： Dell Systems Management Tools and Documentation DVD Dell Server Updates DVD

Extron GMK 1 安装指南说明书

1w w .e x t r o n .c o m L P P r o 520M u s e n s b e f o r er c e .GMK 1 • Installation GuideThe Extron GMK 1 is an accessory for the SMB 1 kit and is used to mount the TLP Pro 320M or the TLP Pro 520M touchpanel on a glass surface. This guideprovides instructions for experienced, professional installers to mount and install either touchpanel using the GMK 1 and SMB 1 mounting kits.The GMK 1 consists of an adhesive patch and a metal plate. Attach the adhesive patch to a glass surface and attach the flat surface of the metal plate to the adhesive patch. The opposite surface of the metal plate has four studs (one in each corner) to secure the SMB 1.Applying the Adhesive Patch1. Decide where to place the touchpanel and clean the surfaceof the glass with lint‑free cloth and a 50:50 mixture of isopropyl alcohol and water.2. Mark the lower edge of the GMK 1 with painter tape applied tothe opposite side of the glass (2). Use a level.3. Remove the white paper backing from the adhesive patch (3).4. Spray a solution of no tears baby shampoo in water (¼ teaspoonof shampoo in a quart of water) onto the glass and adhesive patch (4). The solution acts as a lubricant that allows you tomaneuver the adhesive patch precisely into position.5. Carefully align the adhesive patch with the tape from step 2 (5).Use a credit card or similar flat edge to remove any air bubblestrapped between the adhesive and the glass. Use a cloth to absorb excess liquid.6. The patch can move easily while it is still wet. Allow it at least1 hour to dry before applying the GMK 1 plate.Applying the GMK 1 Plate to the Adhesive7. Remove the black plastic backing from the adhesive patch (7).8. Spray the exposed surface of the adhesive patch and the flatsurface of the GMK 1 with the shampoo solution (8).9. Carefully align the lower edge of the plate with the tape fromstep 2. Hold the GMK 1 at a slight angle to allow air to escape without forming bubbles as you press the plate into place (9).The shampoo solution acts as a lubricant that allows you to move the GMK 1 into position. However, the plate becomes more difficult to move as the solution starts to dry out (about 20 minutes).(bottom) edge(4) StudsRemove the black plasticbacking from theadhesive patch.Spray the GMK 1and adhesive patchwith shampoo solution.Allow the solution atleast 1 hour to dry.6789268-2296-01 B05 15Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA ‑ West Extron USA ‑ East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 FAX +1.919.850.1001 FAXExtron Europe+800.3987.6673 (Inside Europe Only)+31.33.453.4040 +31.33.453.4050 FAXExtron Asia +65.6383.4400+65.6383.4664 FAXExtron Japan +81.3.3511.7655+81.3.3511.7656 FAXExtron China +86.21.3760.1568 +86.21.3760.1566 FAXExtron Middle East +971.4.299.1800+971.4.299.1880 FAXExtron Korea +82.2.3444.1571+82.2.3444.1575 FAXExtron India 1800.3070.3777 Inside India Only +91.80.3055.3777 +91.80.3055.3737 FAX© 2015 Extron Electronics All rights reserved. GMK 1 • Installation Guide (Continued)10. Press the plate firmly against the glass to force out excess liquid. Use a cloth to absorb excess liquid.11.Allow the bond to set for at least 1 hour. If possible, allow 72 hours for maximum strength.Mounting the SMB 1 on the GMK 112. Align the four holes on the back of the SMB 1 with thefour studs on the GMK 1. Secure the SMB 1 to the GMK 1 using the four provided nuts (¤). Do not overtighten thenuts.Installing the Touchpanel in the SMB 113. Secure the wall plate adapter to the SMB 1, using the fourprovided screws (¥).14. Run cables through the cable cutout and connect them tothe back panel of the touchpanel (¦, see the user guide for your touchpanel at ).15. Press the touchpanel onto the wall plate adapter (§). Fourcatches hold it in place.16.If the bezel has been removed, snap it back into place.。

海哥电子momentus 4200.2安装指南说明书

Momentus 4200.2 Installation GuideST9100822A, ST9808210A, ST960821A, ST950212A,ST9402113A and ST930219AATA Interface Disc DrivesPublication Number: 100342048, Rev. D, January 2005The easiest way to install your driveMany of today’s mobile computers have been designed to make it possible for the end user to replace the hard drive. Refer to your system’s user manual for the location of the hard drive compartment and the specific instructions regarding replacement.Some mobile systems are sealed and require specialized tools to gain access to the hard drive.Caution.Special training or tools may be needed to service some mobile computers. In some cases, opening the case may void your war-ranty. Consult your system documentation.Seagate recommends taking your system to an authorized service techni-cian to replace your hard drive.Refer to your system manufacturer’s support website for the most up-to-date information. Read and follow all instructions regarding the proper steps to be taken when replacing the systems hard drive.What you need• A Phillips screwdriver•Existing drive mounting screws (reuse)•Existing drive mounting framework, cage or tray (reuse)•ATA interface adapter (built into notebook and laptop systems) Handling precautions/electrostatic discharge protection •Disc drives are fragile. Do not drop or jar the drive. Handle the drive only by the edges or frame. Keep the drive in the electrostatic discharge (ESD) bag until you are ready to install it to minimize handling damage.•Drive electronics are extremely sensitive to static electricity. While installing the drive, wear a wrist strap and cable connected to ground.•Turn off the power to the host system during installation.•Do not disassemble the drive. Doing so voids the warranty. See the war-ranty information on page 2.•Do not apply pressure or attach labels to the circuit board or to the top of the drive.Drive characteristicsST9100822A ST9808210A ST960821A Formatted capacity 100 Gbytes80 Gbytes60 Gbytes Total number of sectors* 195,371,568156,301,488117,210,240 Cache size8 Mbytes8 Mbytes8 MbytesST950212A ST9402113A ST930219A Formatted capacity 50 Gbytes40 Gbytes30 Gbytes Total number of sectors* 97,696,36878,140,16058,605,120 Cache size 2 Mbytes 2 Mbytes 2 Mbytes*One sector equals 512 bytes.Replacing the existing hard driveEach system has its own unique hard drive compartment. Refer to your system manual to locate the hard drive compartment and for instructions on removing and replacing the hard drive.Warning.Turn off the computer. If you have a notebook or laptop com-puter, disconnect the power charger/adapter and remove thebattery before you open the case or touch any internal compo-nents.Note.This drive is designed for a host computer that supplies interface signals and +5V power through a single 44-pin connector. Most mobile computers have a fixed connector that attaches directly to the drive.Setting the jumpersRefer to the jumper settings in Figure 1 or on your drive label to configure the drive for your system. Jumper settings can also be accessed online from our web site at .Master or single drive: Use the options jumper block shown in Figure 1 to configure the drive for operation. This jumper block is the 4-pin header adjacent to pins 1 and 2 of the I/O signal pins.Note.For mobile system operation, use cable select (default) or master.four screws in the bottom-mounting holes. See Figure 2 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:•Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.•Use only M3 x 0.5 mounting screws.•Gently tighten the mounting screws (maximum torque: 4.0 in-lb).•Four (4) threads (0.080 inches) minimum screw engagement recom-mended.Figure 2.Mounting dimensions—end, top, side, and bottom viewsConfiguring the BIOSAfter completing the drive installation, restart your computer. Your com-puter may automatically detect your new drive. If your computer does not automatically detect your new drive, follow the steps below.1.Restart your computer. While the computer restarts, run the systemsetup program (sometimes called BIOS or CMOS setup). This is usu-ally done by pressing a special key, such as DELETE, ESC, or F1 dur-ing the startup process.2.Within the system setup program, instruct the system to auto detectyour new drive.3.Save the settings and exit the setup program.When your computer restarts, it should recognize your new drive. If your system still doesn’t recognize your new drive, see the troubleshooting section on this sheet.System manufacturer’s operating system restore CDRefer to your mobile system documentation for specific instructions on restoring the operating system on your newly installed hard drive. Many computers require the use of an operating system restore CD, originally shipped with the system, to reload the operating system on the hard drive. Microsoft operating system installation instructionsFor detailed information about installing a Microsoft operating system on your new Seagate drive, refer to the Microsoft Knowledgebase article ref-erences below. To locate an article, go to and enter the article number in any search box on the Microsoft web site. For example, to view the Knowledgebase article for installing Windows XP on your new Seagate drive:1.Open your browser.2.Go to .3.Enter 313348 in the Microsoft web site search box.4.Press Enter.The article is displayed on your screen.Operating system Microsoft Knowledgebase article numbers Windows XP313348Windows 2000/NT308209 (see also: 175761)Windows Me/98/95255867 (see also: 166172)Preparing the drive using DiscWizardWe recommend using DiscWizard Starter Edition to automatically partition and format your drive. DiscWizard software is available at and is free. To run DiscWizard:1.Insert your bootable DiscWizard Starter Edition diskette or CD and fol-low the instructions. DiscWizard will guide you through the installation process.2.Boot your computer from the Windows operating system CD-ROM orfrom your system startup diskette with the Windows CD loaded. Follow the instructions provided on your screen.TroubleshootingIf your drive is not working properly, these troubleshooting tips may help solve the problem.1.Does the drive spin up? A spinning drive produces a faint whine andclicking noise. If your drive does not spin, check that the power con-nector and interface cable are securely attached.2.Does the computer recognize the drive? Verify that the drive isenabled in the system CMOS or setup program. If not, select the auto detect option and enable it. If your drive has a problem, it may not be recognized by the system. If the operating system does not recognize the drive, you need to load your host adapter drivers.3.Does FDISK detect the drive? Run the FDISK program located onyour Windows startup diskette. Type fdisk/status to verify that your hard drive is present and recognized by the system.4.I’m running Windows 98 and FDISK is not reporting the fullcapacity of my drive. Why? You need to upgrade your version of FDISK if you are using the diskettes or CD that came with your original Windows 95 or 98 operating system. Microsoft provides a free down-loadable FDISK upgrade. See Microsoft Knowledgebase article num-ber: 263044 located at .5.Does ScanDisk find the drive defect-free? ScanDisk is a utilitylocated on your Windows startup diskette that scans the drive for defects. If defects are detected, this may be an indication of a problem.6.Why does my computer hang on startup? Verify that your system isATA compatible. You need either an ATA-compatible motherboard con-nector or ATA host adapter to use this drive.Note.If these tips do not answer your question or solve the problem, con-tact your dealer or visit to download SeaTools™ disc diagnostics software and more troubleshooting advice.Seagate support servicesFor online information about Seagate products, visit or ************************************************.If you need help installing your drive, consult your dealer first. If you need additional help, call a Seagate technical support specialist. Before calling, note your system configuration and drive model number.Africa+1-405-324-4714Netherlands00 800-47324283 Australia1800-14-7201New Zealand0800-443988Austria0 800-20 12 90Norway00 800-47324283 Belgium00 800-47324283Poland00 800-311 12 38 China*800-810-9668Spain00 800-47324283 Denmark00 800-47324283Sweden00 800-47324283 France00 800-47324283Switzerland00 800-47324283 Germany00 800-47324283Singapore800-1101-150Hong Kong800-90-0474Taiwan*00-800-0830-1730 Hong Kong†001-800-0830-1730Thailand001-800-11-0032165 India1-600-33-1104Turkey00 800-31 92 91 40 Indonesia001-803-1-003-2165United Kingdom00 800-47324283 Ireland00 800-47324283USA/Canada/1-800 SEAGATE or Italy00 800-47324283Latin America+1-405-324-4700 Japan0034 800 400 554Other EuropeanMalaysia1-800-80-2335countries+1-405-324-4714 Middle East+1-405-324-4714*Mandarin†CantoneseWarranty.To determine the warranty status of your Seagate disc drive, contact your place of purchase or visit our web site at for more information. Return Merchandise Authorization (RMA). Run SeaTools to diagnose your drive before requesting a return authorization. In addition, please verify that your drive is defective by following the troubleshooting checklist in this guide. Seagate offers com-prehensive customer support for all Seagate drives worldwide. Seagate customer service centers are the only facilities authorized to service Seagate drives. Drive return procedures vary depending on geographical location and are subject to current international trade regulations.Shipping the driveCaution.Back up the data before shipping. Seagate assumes no responsibility for data lost during shipping or service.Shipping drive in an unapproved container voids the warranty. Pack the drive with original box and packing materials. Use no other materials. This prevents electrical and physical damage in transit.Electromagnetic compliance for the European Union. This model complies with the European Union requirements of the Electromagnetic Compatibility Directive 89/ 336/EEC of 03 May 1989 as amended by Directive 92/31/EEC of 28 April 1992 and Directive 93/68/EEC of 22 July 1993. Compliance of this drive, as a system compo-nent, was confirmed with a test system. We cannot guarantee that your system will comply. The drive is not meant for external use (without properly designed enclosure, shielded I/O cable, etc.).Sicherheitsanleitung 1. Das Gerrät ist ein Einbaugerät, das für eine maximale Umgebungstempeatur von 60°C vorgesehen ist. 2. Zur Befestigung des Lufwerks werden 4 Schrauben 6-32 UNC-2A benötigt. Bei seitlicher Befestigung darf die maxi-male Länge der Schrauben im Chassis nicht merh als 3,3 mm und bei Befestigung an der Unterseite nicht mehr als 5,08 mm betragen. 3. Als Versorgungsspannugen wer-den benötigt: +5V +/- 5% 0,74A; +12V +/- 5% 2,8A 4. Die Versorgungsspannung muss SELV entsprechen. 5. Alle Arbeiten auf dem Festplattte dürfen nur von Ausge-biletem Serciepersonal durchgeführt werden. Bitte entfernen Sie nicht die Aufschrift-enschilder des Laufwerkes. 6. Der Einbau des Laufwerkes muss den Anforderungen gemäss DIN IEC 950 VDE 0805/05.90 entspreche.© 2004, 2005 Seagate Technology LLC. All rights reservedPublication number: 100342048, Rev. D, January 2005, Printed in U.S.A.Seagate and Seagate Technology are registered trademarks of Seagate Technology LLC. Momentus and the Wave logo are registered trademarks or trademarks of Seagate Technology LLC. Other product names are registered trademarks or trade-marks of their owners. Seagate reserves the right to change, without notice, product offerings or specifications.。

雨人系统配置与安装说明(总)

第1章配置与安装.................................................................................... 错误!未定义书签。

系统要求 ....................................................................................................错误!未定义书签。

硬件配置 ............................................................................................错误!未定义书签。

软件环境 ............................................................................................错误!未定义书签。

软件安装顺序与问题说明 ........................................................................错误!未定义书签。

软件安装说明 ............................................................................................错误!未定义书签。

网络加密卡安装配置说明 ........................................................................错误!未定义书签。

在加密卡服务器上安装机密卡驱动 ................................................错误!未定义书签。

在加密卡服务器上启动加密卡服务程序 ........................................错误!未定义书签。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

GE KELMAN一、需要了解的一些资料1、重要特性TRANSFIX 是变压器油中溶解气体及微水在线监测系统，它被用来测量反映变压器状态分析的关键气体数值。

这些气体有：氢气、甲烷、乙烷、乙烯、一氧化碳、二氧化碳、氧气及乙炔。

TRANSFIX 也同样测量绝缘油中的水分含量及变压器负载电流。

TRANSFIX 从变压器绝缘油中取得气样并使用光声光谱技术分析气样。

这些数据被储存在设备内部并可以下载至电脑上。

关键特性●TRANSFIX 使用动态顶空脱气法从油样中获取目标气体。

●不需要消耗气体，例如载气等。

●可在一小时内测量出精确的结果，不需要因为薄膜平衡脱气法而等待数小时。

●安装后免维护。

●使用高精度及高稳定性的光声光谱技术。

●完全嵌入式微处理器及固态内部记忆体可存储10,000 条记录（采用1 小时的采样间隔至少可存储1 年的测量数据)。

●室外等级为NEMA 4X, IP55 的不锈钢外壳通过坚固的不锈钢钢管连接到变压器上。

●TRANSFIX 本体上提供手动采样口。

●所有气体测量装置均安装在TRANSFIX 内部，没有任何外部气体测量探头。

●可使用变压器负载监测。

●外壳上安装有一个绿色LED 电源指示灯及一个蓝色LED 维护灯。

●通讯选项包括：以太网、RS-232、移动电话Modem (GSM 或CDMA)、固定电话Modem、租用线路Modem、RS-485 及其他可选通讯方式。

●为调试及本地数据下载提供USB 连接。

●变压器油内不含多氯联苯。

●变压器出油阀处的油温应该介于-10°C~120°C。

●变压器应处于大气压力或以上。

(见下)●变压器油箱上应有独立的连接TRANSFIX 和变压器的系统取油及回油阀门。

TRANSFIX 安装现场工作环境温度范围应介于-40°C~55°C。

注意若为充氮保护变压器，则应首先检查压力/真空计。

若为正压，则可安装TRANSFIX 系统。

若为负压，则变压器中存在真空。

若在变压器内存在真空，如打开变压器上的阀门则会造成空气流入。

空气气泡对运行中的变压器会造成损害。

内部为负压的带电变压器不应该安装TRANSFIX 装置！3、阀门选取的位置TRANSFIX 系统的油循环回路将从变压器抽取油样，脱气后分析气体，并将油重新返回变压器。

因而取油、回油位置对于准确分析变压器油中气体含量至关重要。

变压器油样从变压器的一个阀门取出后（取油阀），从另一个阀门返回变压器（回油阀）。

从变压器取油阀取出的油样应该是混合均匀的变压器的典型油样。

下页包含当选择何处连接变压器至TRANSFIX 的油管回路时应考虑的要点。

变压器本体各类阀门选取:注油阀:一般情况下，不应选取顶部注油阀作为取油口尤其对于充氮保护变压器。

主要原因是油位可能未及该处，并且将来不能确保该位置始终有油。

系统安装时可将注油阀作为回油口。

排空阀:既可使用排空阀作为回油口，也可作为取油口。

由于排空阀接近水平地面，故一般多作为回油口来提供一个方便的接入点以便系统安装过程中排空所有管路内空气。

辅助阀门:一些变压器上也配有许多不同的辅助阀门和接口。

这些阀门也可能会是连接TRANSFIX 到变压器的很好选择，选取前需要明确地了解所选阀门或接口与变压器上具体连通的。

确保所选的回油阀不是通过管路至变压器内部的另一个位置例如顶部空间或者在内部线圈里。

冷却回路阀门:如果没有其他可用阀门，TRANSFIX 应采用冷却回路阀作为取样口。

不要将油回至冷却回路除非可以很清楚地肯定冷却不是定向流动的并且没有其他可选用的阀门来连接TRANSFIX。

取样阀所有变压器上的阀门设置也不尽相同；每台变压器上的回油阀和取油阀需要配有¼英寸NPT（阴螺纹）来与TRANSFIX 系统提供的¼英寸锥管螺纹阳接头适当连接。

以下列出了准备取油及回油阀时的注意事项。

取油●通常油样应取自变压器中部以上或运行中的冷却回路。

需要确保油取自混油均匀的位置，并且是新鲜流动的变压器油。

此处位置的油温应介于-10°C~120°C 。

●取样阀与回油阀间相隔距离至少应保持12 英寸（30cm），防止将已分析过的脱气油样与正在采样的变压器油混合。

●必须提供回油阀门配合¼英寸NPT（阴螺纹）接头，使用不锈钢，黄铜或铸铁做的接头和转接头。

不能使用镀锌钢，紫铜或塑料接头因为这些材料会对取样回路中的气体浓度起负面作用。

●若取油口位置超过变压器底部上方1.82m（6 英尺），建议在取油管路上另安装一¼英寸球阀，安装在站着时可触手可及的回路上且容易看见的位置，以便在需要的情况下方便地关闭系统取油回路。

回油●油样分析后通常返回变压器底部的阀，可能是变压器的排油阀。

不要将油返回变压器冷却回路或直接通向变压器内的临界位置例如设计用于定向冷却的冷却回路。

●油样必须通过Kelman 提供的回油组件返回变压器。

此组件由一个单向截止阀、一个球阀及一个可以在安装过程中排出系统管路中的空气的连接口组成。

排气口必须竖直向上使空气从中排出。

此组件可被重新配置来配合变压器阀门和转接头。

此组件必须配有¼英寸NPT（阴螺纹）连接至变压器。

.●若回油阀位置超过变压器底部上方6 英尺（1.82m），建议在回油管路上另安装一¼英寸球阀，安装在站着时可触手可及的回路上且容易看见的位置，以便在需要的情况下方便地关闭系统回油回路。

●确保回油结构消除任何可能进入设备内的气穴是很重要的。

例如，在回油阀上使用¼” NPT 接头朝上的三通可以消除任何气穴，在阀门盲板上钻取的¼” NPT 孔应靠近顶部来消除可能产生的气穴。

4、安装仪器本体当选择何处及如何安装TRANSFIX 时应当尤其小心来确保顺利安装及安全的固定结构。

安装前需要考虑如下注意事项：●TRANSFIX 不能在还没有事先咨询Kelman 技术支持的情况下直接安装在变压器本体上。

●TRANSFIX 可以直接安装在油箱上，但只需要得到Kelman 固定安装和防震措施的批准。

●TRANSFIX 位置应该方便连接所有变压器的取油阀和回油阀，这样可以保持管线长度的最短。

对每条单独油路，变压器与TRANSFIX 仪器之间的取油和回油管线总长应该不超过20m (65 英尺)。

●TRANSFIX 通常安装在TRANSFIX 安装支架上，支架尺寸如下：●适应复杂天气状况的承重装置(172 lbs/ 78 kg)。

须设计安全地固定于平坦的安装面上。

●TRANSFIX 必须安装在平面上，垂直及水平倾斜角度不超过5 度。

这样便于承重支架支撑●整个TRANSFIX 和安装框架的重量。

如需浇筑混凝土基座，Kelman 建议基座的外形尺寸至少为122cm（长）X61cm（宽）X9cm（深），并使用#3(10mm)钢加强周围的钢筋强度（按惯例和规定每次都要做好接地和连接工作)。

●TRANSFIX 安装位置不应妨碍变压器日常巡检。

●TRANSFIX 仪器安装位置不应妨碍变压器冷却系统的流通。

●严禁限制或妨碍TRANSFIX 仪器底部及左侧部位通风口的空气流通。

●TRANSFIX 仪器面板前至少应保留75cm（2.5 英尺）的空间，以便于打开TRANSFIX 的●前门来进行TRANSFIX 的安装，维护和日常操作。

5、电源TRANSFIX 需要提供85-265 V，47-63Hz单相交流电源，TRANSFIX使用的最大工作电流为8A单相。

.●使用一个10 -15A 的断路器可满足这些要求。

●确保电路为不间断供电使TRANSFIX 可持续工作。

●确定ON/OFF 开关在“关”位置上。

逆时针拧开螺丝打开TRANSFIX 右手边的前面板。

●将交流电源电缆从仪器底部的前端右侧的电缆套线管中和不锈钢外壳的前端扣环中走线。

除去125mm (5 英寸)电缆的外部护套并连接电缆至下图所示的接线端。

●拧紧电缆的套线管来固定电缆。

●如果要使用电伴热，穿过外壳后面的套线管，连接电伴热电源线到终端排插头上(上图)。

●确保电伴热电压选择开关被设定到正确的位置上115V 或230V(下图) 。

开关位于外壳背面的电路板上。

●TRANSFIX 仪器外壳右下角有一个¼英寸(6mm) 的接地柱。

这应该每次按惯例或规定被连接到适当的接地上(下图)。

5、终端排TRANSFIX 仪器装有螺丝终端排，提供到报警、电话线、串口、变压器负载传感器的连接。

这些端子位于前面板的背面（下图）。

通讯模块和可选的模拟输入模块也位于此电路板上。

所有进出TRANSFIX 的通讯及传感器线缆均要穿过监测仪底部左手侧的两个1 英寸(25mm)电缆套线管中的一个。

报警连接TRANSFIX 拥有六个用户可配置警报继电器输出及一个电源指示继电器输出。

这些继电器输出可在端子板上找到(下图)。

(Alarm1 操作维护灯)。

对于各个继电器三个连接均提供N/O 常开、N/C 常闭及COM 公共触点。

每个警报继电器输出可承载最大5A @ 250VAC，200mA@125VDC 或5A@30VDC（下图）。

●通过使用TRANSCONNECT 软件，用户可自行对TRANSFIX 的许多不同结果的组合进行报警值设定。

一次报警或警告状态会激发所选继电器产生断开或闭合触点的动作，并点亮仪器前面板的LED 指示灯。

参考TRANSCONNECT 用户指南获得更多关于设置报警的信息。

任何时候当TRANSFIX 连接到主电源时，WATCHDOG POWER 继电器即通电，并且●TRANSFIX 内部处理器开始运行。

辅助电源外壳背面的电源供电电路板为诸如无线modems 或通讯协议转换装置这些配件提供了0.7A的+12VDC 和+24VDC 直流电源(下图)。

再次检查所有情况才能开始按照TRANSFIX 调试指南调试TRANSFIX 仪器在上述内容中已经写明了，安装GE KELMAN产品时需要下列的一些条件：1、工作电源：85-265 V，47-63Hz单相交流电源，TRANSFIX使用的最大工作电流为8A单相。

2、通讯线：非五类二对双绞屏蔽线3、安装地基及位置：Kelman 建议基座的外形尺寸至少为122cm（长）X61cm （宽）X9cm（深），位置要求：●油路回路总长在20米内，●并且TRANSFIX 安装位置不应妨碍变压器日常巡检、●不妨碍变压器冷却系统的流通、●严禁限制或妨碍TRANSFIX 仪器底部及左侧部位通风口的空气流通●TRANSFIX 仪器面板前至少应保留75cm（2.5 英尺）的空间、以便于打开TRANSFIX 的前门来进行TRANSFIX 的安装，维护和日常操作。

GE_KELMAN安装手册

GE Fanuc ME软件配置及使用

Gempack安装使用说明

Dell OpenManage 安装和安全性用户指南说明书

SYMANTEC企业版安装手册

莫勒控制器系统安装手册说明书

克罗韦尔 Armor Compact GuardLogix 控制器安装指南 说明书

GEK-114708 HMI软件用户手册 Vol. II-操作员站软件V1.0.pdf

GE_KELMAN安装手册

TEXECOM安装手册

GE Grid Solutions Kelman Transport X

戴尔OpenManage管理站软件7.1安装指南说明书

罗克韦尔自动化 Guardmaster 442G 多功能通道保护锁安装说明书

Greenheck安装说明书

戴尔OpenManage部署工具包安装指南.pdf_1701139568.517306说明书

Dell OpenManage 软件快速安装指南.pdf_1701150311.9214437说明书

Extron GMK 1 安装指南说明书

海哥电子momentus 4200.2安装指南说明书

雨人系统配置与安装说明(总)

克罗韦尔 Armor Compact GuardLogix 控制器安装指南说明书