E558HN-100096中文资料
H558中文资料
元器件交易网汕头华汕电子器件有限公司PNP SILICONTRANSISTOR 对应国外型号 BC558H558█ 主要用途开关、视频放大。
█ 外形图及引脚排列█ 极限值（Ta=25℃）TO-92 T stg ——贮存温度………………………………… -55~150℃ Tj——结温……………………………………………150℃ P C ——集电极耗散功率…………………………………500mW V CBO ——集电极—基极电压………………………………-30V V CEO ——集电极—发射极电压……………………………-30V V E B O ——发射极—基极电压……………………………-5V I C ——集电极电流………………………………………-100mA 1―集电极，C 2―基 极，B 3―发射极，E█ 电参数（Ta=25℃）参数符号 符 号 说 明 最小值 典型值 最大值 单 位 测 试 条 件BVCBO BVCEO BVEBO ICBO HFE VCE(sat1) VCE(sat2) VBE(sat1) VBE(sat2) VBE(on1) VBE(on2) fTCob集电极—基极击穿电压 -30 集电极—发射极击穿电压 -30 发射极—基极击穿电压 -5 集电极—基极截止电流 直流电流增益 110 集电极—发射极饱和电压 基极—发射极饱和电压 基极—发射极导通电压 特征频率 输出电容-90 -250 -700 -900 -660 150-15 800 -300 -650V V V nA mV mV mV mV mV mV MHz pFIC=-100μA，IE=0 IC=-10mA，IB=0 IE=-100μA，IC=0 VCB=-30V,IE=0 VCE=-5V,IC=-2mA IC=-10mA,IB=-0.5mA IC=-100mA,IB=-5mA IC=-10mA,IB=-0.5mA IC=-100mA,IB=-5mA VCE=-5V,IC=-2mA VCE=-5V,IC=-10mA VCE=-5V,IC=-10mA，f=1MHz VCE=-10V,IC=0,f=1MHz-750 -800 6█ 分档及其标志A 110—220 B 200—450 C 420—800。
agilent-5067-5585_chinese.pdf-高灵敏度d1000试剂安全技术说明书
High Sensitivity D1000 Reagents, Part Number 5067-5585*************(24小时)化学品安全技术说明书GHS product identifier 应急咨询电话（带值班时间）::供应商/ 制造商:安捷伦科技贸易（上海）有限公司中国（上海）外高桥自由贸易试验区英伦路412号（邮编:200131)电话号码： 800-820-3278传真号码: 0086 (21) 5048 2818High Sensitivity D1000 Reagents, Part Number 5067-5585化学品的推荐用途和限制用途High Sensitivity D1000 Sample Buffer 5190-6504High Sensitivity D1000 Ladder 5067-5587部件号:部件号（化学品试剂盒）:5067-5585安全技术说明书根据 GB/ T 16483-2008 和 GB/ T 17519-2013GHS化学品标识:高灵敏度 D1000 试剂, 部件号 5067-5585推荐用途限制用途High Sensitivity D1000Sample Buffer1 x 300 µl 样品瓶5067-5587High Sensitivity D1000Ladder1 x 20 µl 样品瓶::有关环境保护措施，请参阅第 12 节。
物质或混合物的分类根据 GB13690-2009 和 GB30000-2013紧急情况概述High Sensitivity D1000 Sample Buffer液体。
High Sensitivity D1000 Ladder 液体。
High Sensitivity D1000 Sample Buffer无色。
High Sensitivity D1000 Ladder 无色。
High Sensitivity D1000 Sample Buffer无气味的。
排针排母产品知识培训资料
深圳市连大精密制品有限公司产品知识培训资料自制品部分连大产品料号在12位至14位数之间，产品料号L001－L904连接器主要指标：连接方式、间距、PIN数1、L100―――WAFER系列WAFER的定义：应用于板―线连接，公座的一端为WAFER.WAFER的间距：分为0.8 1.0 1.25 1.5 2.02.5 2.543.0 3.964.25.08。
WAFER的连接方式分为：180度、90度、SMT（贴板/贴片）WAFER 自制的有：WAFER PH0.8 单排立/卧贴系列(PIN数:2-22P)：成品料号规格L100XX-124001X WF PH0.8 XXP LCP 单排立贴环保L100XX-134001X WF PH0.8 XXP LCP 单排卧贴环保材料料号规格P100XX-14001 WF单排塑胶 PH0.8 3P 立/卧贴 LCP米白色环保T10012-9801 WF端子 PH0.8 单排 C5191-H<HV190-210>立/卧贴镀锡环保T10092-5801 接地片端子 C5191-H<HV190-210> 青铜镀锡环保<WF系列共用>WAFER PH1.0 单排立/卧贴系列(PIN数:2-22P)：成品料号规格L101XX-124001X WF PH1.0 1*XXP LCP 单排立贴环保L101XX-134001X WF PH1.0 1*XXP LCP 单排卧贴环保材料料号规格P101XX-14001 WF塑胶 PH1.0 XXP SMT单排立/卧贴 LCP 米白色环保T10112-6802 WF PH1.0 单排立贴端子 C5191-H 镀锡环保T10092-5801 接地片端子 C5191-H<HV190-210> 青铜镀锡环保<WF系列共用> 成品料号规格L101XX-134001X WF PH1.0 1*XXP LCP 单排卧贴环保材料料号规格P101XX-14001 WF塑胶 PH1.0 XXP SMT单排立/卧贴 LCP 米白色环保T10113-6805 WF PH1.0 H:2.9 单排卧贴端子 C5191-H 镀锡环保T10092-5801 接地片端子 C5191-H<HV190-210> 青铜镀锡环保<WF系列共用>WAFER PH1.0 H4.3 立贴系列(PIN数:2*10/15/20/25P)：成品料号规格L101XX-224X01X WAFER PH1.0 2*XXP H4.3 立贴带柱/不带柱带吸取帽LCPfirst材料料号规格P101XX-24201 WAFER塑胶 PH1.0 2*XXP 立贴带柱/不带柱 H:4.3 LCP 环保P10115-24120 WAFER 吸取帽 PH1.0 LCP 环保T10112-6101 WF PH:1.0 H:4.3 双排立贴端子 C5191-H 镀全金1U" 环保T10092-5801 接地片端子 C5191-H<HV190-210> 青铜镀锡环保<WF系列共用>WAFER PH1.0 H3.9 卧贴系列(PIN数:2*10/15/20/25P)：成品料号规格L101XX-234002X WAFER PH1.0 2*XXP H3.9侧插卧贴LCP 环保材料料号规格P101XX-24301 WF塑胶 PH1.0 2*XXP 卧贴 H:3.9 LCP 环保T10113-6103 WF PH1.0 H3.9 双排卧贴端子A C5191-H 1U" 环保T10113-6104 WF PH1.0 H3.9 双排卧贴端子B C5191-H 1U" 环保T10092-5801 接地片端子 C5191-H<HV190-210> 青铜镀锡环保<WF系列共用>WAFER PH1.0 H5.4 卧贴系列(PIN数:2*10/15/20/25P)：成品料号规格L101XX-234001X WF PH1.0 2*XXP H:5.4 卧贴 LCP 卷装环保材料料号规格P101XX-24302 WF塑胶 PH1.0 2*XXP 卧贴 H:5.4 LCP 环保T10113-6101 WF PH1.0 H:5.4 侧插卧贴端子A C5191-H 镀1U"全金环保T10113-6102 WF PH1.0 H:5.4 侧插卧贴端子B C5191-H 镀1U"全金环保T10092-5801 接地片端子 C5191-H<HV190-210> 青铜镀锡环保<WF系列共用>WAFER的规格：单排间距0.8---1.25的最小为2P，最大为20P双排间距0.8---1.25的最小为2*5P，最大2*25P，具体有2*5P、2*8P、2*10P、2*15P、2*20P、2*25P。
ESDH155ADM用户手册
AD558JNZ中文资料
FUNCTIONAL BLOCK DIAGRAMOUTOUT SENSE AOUT SELECT +V CONTROL B B B B B B B B DIGITAL INPUT DATA (BUS)REV.AInformation furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.aDACPORT Low Cost, CompleteµP-Compatible 8-Bit DACAD558*One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.Tel: 617/329-4700Fax: 617/326-8703FEATURESComplete 8-Bit DACVoltage Output–2 Calibrated Ranges Internal Precision Bandgap Reference Single-Supply Operation: +5 V to +15 V Full Microprocessor InterfaceFast:1 s Voltage Settling to ؎1/2 LSB Low Power:75 mW No User TrimsGuaranteed Monotonic Over Temperature All Errors Specified T MIN to T MAXSmall 16-Pin DIP and 20-Pin PLCC Packages Single Laser-Wafer-Trimmed Chip for Hybrids Low CostMIL-STD-883 Compliant Versions AvailablePRODUCT DESCRIPTION The AD558 DACPORT® is a complete voltage-output 8-bit digital-to-analog converter, including output amplifier, full microprocessor interface and precision voltage reference on a single monolithic chip. No external components or trims are required to interface, with full accuracy, an 8-bit data bus to an analog system.The performance and versatility of the DACPORT is a result of several recently-developed monolithic bipolar technologies. The complete microprocessor interface and control logic is imple-mented with integrated injection logic (I 2L), an extremely dense and low power logic structure that is process-compatible with linear bipolar fabrication. The internal precision voltage reference is the patented low voltage bandgap circuit which permits full-accuracy performance on a single +5 V to +15 V power supply.Thin-film silicon-chromium resistors provide the stability re-quired for guaranteed monotonic operation over the entire oper-ating temperature range (all grades), while recent advances in laser-wafer-trimming of these thin-film resistors permit absolute calibration at the factory to within ±1 LSB; thus no user-trims for gain or offset are required. A new circuit design provides voltage settling to ±1/2 LSB for a full-scale step in 800 ns.The AD558 is available in four performance grades. The AD558J and K are specified for use over the 0°C to +70°C temperature range, while the AD558S and T grades are specified for –55°C to +125°C operation. The “J” and “K” grades are available either in 16-pin plastic (N) or hermetic ceramic (D) DIPS.They are also available in 20-pin JEDEC standard PLCC pack-ages. The “S” and “T” grades are available in the 16-pin her-metic ceramic DIP package.*Protected by U.S. Patent Nos. 3,887,863; 3,685,045; 4,323,795; Patents Pending.DACPORT is a registered trademark of Analog Devices, Inc.PRODUCT HIGHLIGHTS1.The 8-bit I 2L input register and fully microprocessor-compatible control logic allow the AD558 to be directly connected to 8- or 16-bit data buses and operated with standard control signals. The latch may be disabled for direct DAC interfacing.2.The laser-trimmed on-chip SiCr thin-film resistors arecalibrated for absolute accuracy and linearity at the factory.Therefore, no user trims are necessary for full rated accuracy over the operating temperature range.3.The inclusion of a precision low voltage bandgap reference eliminates the need to specify and apply a separate refer-ence source.4.The voltage switching structure of the AD558 DAC section along with a high speed output amplifier and laser trimmed resistors give the user a choice of 0 V to +2.56 V or 0 V to +10 V output ranges, selectable by pin-strapping. Circuitry is internally compensated for minimum settling time on both ranges; typically settling to ±1/2 LSB for a full-scale 2.55 volt step in 800 ns.5.The AD558 is designed and specified to operate from a single +4.5 V to +16.5 V power supply.6.Low digital input currents, 100 µA max, minimize bus load-ing. Input thresholds are TTL/low voltage CMOS compat-ible over the entire operating V CC range.7.All AD558 grades are available in chip form with guaranteed specifications from +25°C to T MAX . MIL-STD-883, Class B visual inspection is standard on Analog Devices bipolar chips. Contact the factory for additional chip information.8.The AD558 is available in versions compliant with MIL-STD-883. Refer to Analog Devices Military Products Data-book or current AD558/883B data sheet for detailed specifications.AD558–SPECIFICATIONS(@ T A = +25؇C, V CC = +5 V to +15 V unless otherwise noted)Model AD558J AD558K AD558S1 AD558T1Min Typ Max Min Typ Max Min Typ Max Min Typ Max Units RESOLUTION8888Bits RELATIVE ACCURACY20°C to +70°C±1/2±1/4±1/2±1/4LSB –55°C to +125°C±3/4±3/8LSB OUTPUTRanges30 to +2.560 to +2.560 to +2.560 to +2.56V0 to +100 to +100 to +100 to +10VCurrent Source+5+5+5+5mA Sink Internal Passive Internal Passive Internal Passive Internal PassivePull-Down to Ground4Pull-Down to Ground Pull-Down to Ground Pull-Down to GroundOUTPUT SETTLING TIME50 to 2.56 Volt Range0.8 1.50.8 1.50.8 1.50.8 1.5µs0 to 10 Volt Range4 2.0 3.0 2.0 3.0 2.0 3.0 2.0 3.0µs FULL-SCALE ACCURACY6@ 25°C؎1.5؎0.5؎1.5؎0.5LSB T MIN to T MAX؎2.5؎1؎2.5؎1LSB ZERO ERROR@ 25°C؎1؎1/2؎1؎1/2LSB T MIN to T MAX؎2؎1؎2؎1LSB MONOTONICITY7T MIN to T MAX Guaranteed Guaranteed Guaranteed GuaranteedDIGITAL INPUTST MIN to T MAXInput Current±100±100±100100µA Data Inputs, VoltageBit On-Logic “1” 2.0 2.0 2.0 2.0V Bit On-Logic “0”00.8000V Control Inputs, VoltageOn-Logic “1” 2.0 2.0 2.0 2.0V On-Logic “0”00.800.800.800.8V Input Capacitance4444pF TIMING8t W, Strobe Pulse Width200200200200ns T MIN to T MAX270270270270ns t DH Data Hold Time10101010ns T MIN to T MAX10101010ns t DS Data Set-Up Time200200200200ns T MIN to T MAX270270270270ns POWER SUPPLYOperating Voltage Range (V CC)2.56 Volt Range+4.5+16.5+4.5+16.5+4.5+16.5+4.5+16.5V10 Volt Range+11.4+16.5+11.4+16.5+11.4+16.5+11.4+16.5VCurrent (I CC)1525152515251525mA Rejection Ratio0.030.030.030.03%/% POWER DISSIPATION, V CC = 5 V75125751257512575125mW V CC = 15 V225375225375225375225375mW OPERATING TEMPERATURE RANGE0+700+70–55+125–55+125°C NOTES1The AD558 S & T grades are available processed and screened lo MIL-STD-883 Class B. Consult Analog Devices’ Military Databook for details.2Relative Accuracy is defined as the deviation of the code transition points from the ideal transfer point on a straight line from the offset to the full scale of the device. See “Measuring Offset Error”.3Operation of the 0 volt to 10 volt output range requires a minimum supply voltage of +11.4 volts.4Passive pull-down resistance is 2 kΩ for 2.56 volt range, 10 kΩ for 10 volt range.5Settling time is specified for a positive-going full-scale step to ±1/2 LSB. Negative-going steps to zero are slower, but can be improved with an external pull-down.6The full range output voltage for the 2.56 range is 2.55 V and is guaranteed with a +5 V supply, for the 10 V range, it is 9.960 V guaranteed with a +15 V supply.7A monotonic converter has a maximum differential linearity error of ±1 LSB.8See Figure 7.Specifications shown in boldface are tested on all production units at final electrical test.Specifications subject to change without notice.–2–REV. AAD558REV. A –3–ABSOLUTE MAXIMUM RATINGS*V CC to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . .0 V to +18 V Digital Inputs (Pins 1–10) . . . . . . . . . . . . . . . . . .0 V to +7.0 V V OUT . . . . . . . . . . . . . . . . . . . . . . .Indefinite Short to GroundMomentary Short to V CCPower Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . .450 mW Storage Temperature RangeN/P (Plastic) Packages . . . . . . . . . . . . . . . .–25°C to +100°C D (Ceramic) Package . . . . . . . . . . . . . . . . .–55°C to +150°C Lead Temperature (soldering, 10 sec) . . . . . . . . . . . . .+300°C Thermal ResistanceJunction to Ambient/Junction to CaseD (Ceramic) Package . . . . . . . . . . . . . .100°C/W/30°C/W N/P (Plastic) Packages . . . . . . . . . . . . .140°C/W/55°C/W*Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.AD558 METALIZATION PHOTOGRAPHDimensions shown in inches and (mm).Figure 1a.AD558 Pin Configuration (DIP)V OUTV OUT SENSE V OUT SELECTGNDGND+V CCCS (LSB) DB0DB1DB2DB3DB4DB5DB6(MSB) DB7CEFigure 1a.AD558 Pin Configuration (DIP)V OUT SELECTGND NC GND +V CCDB2DB3DB4DB5NC D B 1D B 0 (L S B )N C V O U TV O U T S E N S ED B 6(M S B ) D B 7N CC EC SNC = NO CONNECTFigure 1b.AD558 Pin Configuration (PLCC and LCC)ORDERING GUIDERelative Accuracy Full-Scale Error Max Error, Max Package Model1Temperature T MIN to T MAX T MIN to T MAX Option 2AD558JN 0°C to +70°C ±1/2 LSB ±2.5 LSB Plastic (N-16)AD558JP 0°C to +70°C ±1/2 LSB ±2.5 LSB PLCC (P-20A)AD558JD 0°C to +70°C ±1/2 LSB ±2.5 LSB TO-116 (D-16)AD558KN 0°C to +70°C ±1/4 LSB ±1 LSB Plastic (N-16)AD558KP 0°C to +70°C ±1/4 LSB ±1 LSB PLCC (P-20A)AD558KD 0°C to +70°C ±1/4 LSB ±1 LSB TO-116 (D-16)AD558SD –55°C to +125°C ±3/4 LSB ±2.5 LSB TO-116 (D-16)AD558TD–55°C to +125°C±3/8 LSB±1 LSBTO-116 (D-16)NOTES 1For details on grade and package offerings screened in accordance with MIL-STD-883, refer to the Analog Devices Military Products Databook or current AD558/883B data sheet.2D = Ceramic DIP; N = Plastic DIP; P = Plastic Leaded Chip Carrier.AD558REV. A–4–CIRCUIT DESCRIPTIONThe AD558 consists of four major functional blocks, fabricated on a single monolithic chip (see Figure 2). The main D-to-A converter section uses eight equally-weighted laser-trimmed current sources switched into a silicon-chromium thin-film R/2R resistor ladder network to give a direct but unbuffered 0mV to 400 mV output range. The transistors that form theDAC switches are PNPs; this allows direct positive-voltage logic interface and a zero-based output range.SENSE SELECTCONTROL B 0B 1B 2B 3B 4B 5B 6B 7DIGITAL INPUT DATA Figure 2.AD558 Functional Block DiagramThe high speed output buffer amplifier is operated in the non-inverting mode with gain determined by the user-connections at the output range select pin. The gain-setting application resistors are thin-film laser-trimmed to match and track the DAC resistors and to assure precise initial calibration of the two output ranges, 0 V to 2.56 V and 0 V to 10 V. The amplifier output stage is an NPN transistor with passive pull-down for zero-based output capability with a single power supply. The internal precision voltage reference is of the patented bandgap type. This design produces a reference voltage of 1.2 volts and thus, unlike 6.3 volt temperature compensated Zeners, may be operated from a single, low voltage logic power supply. The microprocessor interface logic consists of an 8-bit data latch and control circuitry. Low power, small geometry and high speed are advantages of the I 2L design as applied to this section. I 2L is bipolar process compatible so that the performance of the ana-log sections need not be compromised to provide on-chip logic capabilities. The control logic allows the latches to be operated from a decoded microprocessor address and write signal. If the application does not involve a µP or data bus, wiring CS and CE to ground renders the latches “transparent” for direct DAC access.MIL-STD-883The rigors of the military/aerospace environment, temperature extremes, humidity, mechanical stress, etc., demand the utmost in electronic circuits. The AD558, with the inherent reliability of integrated circuit construction, was designed with these ap-plications in mind. The hermetically-sealed, low profile DIP package takes up a fraction of the space required by equivalent modular designs and protects the chip from hazardous environ-ments. To further ensure reliability, military temperature range AD558 grades S and T are available screened to MIL-STD-883.For more complete data sheet information consult the Analog Devices’ Military Databook.CHIP AVAILABILITYThe AD558 is available in laser-trimmed, passivated chip form.AD558J and AD558T chips are available. Consult the factory for details.Input Logic CodingDigital Input Code Output VoltageBinary Hexadecimal Decimal 2.56 V Range 10.000 V Range 0000 000000000000 00010110.010 V 0.039 V 0000 00100220.020 V 0.078 V 0000 11110F 150.150 V 0.586 V 0001 000010160.160 V 0.625 V 0111 11117F 127 1.270 V 4.961 V 1000 000080128 1.280 V 5.000 V 1100 0000C0192 1.920 V 7.500 V 1111 1111FF2552.55 V9.961 VCONNECTING THE AD558The AD558 has been configured for ease of application. All ref-erence, output amplifier and logic connections are made inter-nally. In addition, all calibration trims are performed at the factory assuring specified accuracy without user trims. The only connection decision that must be made by the user is a single jumper to select output voltage range. Clean circuit board lay-out is facilitated by isolating all digital bit inputs on one side of the package; analog outputs are on the opposite side.Figure 3 shows the two alternative output range connections.The 0 V to 2.56 V range may be selected for use with any power supply between +4.5 V and +16.5 V. The 0 V to 10 V range requires a power supply of +11.4 V to +16.5 V.SELECT SENSE OUT SELECT SENSE OUT a.0 V to 2.56 V Output Range b.0 V to 10 V Output RangeFigure 3.Connection DiagramsBecause of its precise factory calibration, the AD558 is intended to be operated without user trims for gain and offset; therefore no provisions have been made for such user trims. If a small in-crease in scale is required, however, it may be accomplished by slightly altering the effective gain of the output buffer. A resistor in series with V OUT SENSE will increase the output range.For example if a 0 V to 10.24 V output range is desired (40 mV = 1 LSB), a nominal resistance of 850 Ω is required. It must be remembered that, although the internal resistors all ratio-match and track, the absolute tolerance of these resistors is typically ±20% and the absolute TC is typically –50 ppm/°C (0 to –100 ppm/°C). That must be considered when rescaling is performed. Figure 4 shows the recommended circuitry for a full-scale output range of 10.24 volts. Internal resistance values shown are nominal.Applications–AD558REV. A–5–The only consideration in selecting a supply voltage is that, in order to be able to use the 0 V to 10 V output range, the power supply voltage must be between +11.4 V and +16.5 V. If, how-ever, the 0 V to 2.56 V range is to be used, power consumption will be minimized by utilizing the lowest available supply voltage (above +4.5 V).TIMING AND CONTROLThe AD558 has data input latches that simplify interface to 8-and 16-bit data buses. These latches are controlled by Chip Enable (CE) and Chip Select (CS) inputs. CE and CS are inter-nally “NORed” so that the latches transmit input data to the DAC section when both CE and CS are at Logic “0”. If the ap-plication does not involve a data bus, a “00” condition allows for direct operation of the DAC. When either CE or CS go to Logic “1”, the input data is latched into the registers and held until both CE and CS return to “0”. (Unused CE or CS inputs should be tied to ground.) The truth table is given in Table I. The logic function is also shown in Figure 6.Table I.AD558 Control Logic Truth TableLatchInput Data CE CS DAC Data Condition0000“Transparent”1001“Transparent”0g00Latching1g01Latching00g0Latching10g1LatchingX1X Previous Data LatchedX X1Previous Data LatchedNOTESX = Does not matter.g = Logic Threshold at Positive-Going Transition.Figure 6.AD558 Control Logic FunctionIn a level-triggered latch such as that in the AD558 there is aninteraction between data setup and hold times and the width ofthe enable pulse. In an effort to reduce the time required to testall possible combinations in production, the AD558 is testedwith t DS = t W = 200 ns at 25°C and 270 ns at T MIN and T MAX,with t DH = 10 ns at all temperatures. Failure to comply withthese specifications may result in data not being latched p roperly.Figure 7 shows the timing for the data and control signals; CEand CS are identical in timing as well as in function.OUTFigure 4.10.24 V Full-Scale ConnectionNOTE: Decreasing the scale by putting a resistor in series with GNDwill not work properly due to the code-dependent currents in GND.Adjusting offset by injecting dc at GND is not recommended for thesame reason.GROUNDING AND BYPASSING*All precision converter products require careful application ofgood grounding practices to maintain full rated performance.Because the AD558 is intended for application in microcom-puter systems where digital noise is prevalent, special care mustbe taken to assure that its inherent precision is realized.The AD558 has two ground (common) pins; this minimizesground drops and noise in the analog signal path. Figure 5shows how the ground connections should be made.R LCCFigure 5.Recommended Grounding and BypassingIt is often advisable to maintain separate analog and digitalgrounds throughout a complete system, tying them common inone place only. If the common tie-point is remote and acciden-tal disconnection of that one common tie-point occurs due tocard removal with power on, a large differential voltage betweenthe two commons could develop. To protect devices that inter-face to both digital and analog parts of the system, such as theAD558, it is recommended that common ground tie-pointsshould be provided at each such device. If only one systemground can be connected directly to the AD558, it is recom-mended that analog common be selected.POWER SUPPLY CONSIDERATIONSThe AD558 is designed to operate from a single positive powersupply voltage. Specified performance is achieved for any supplyvoltage between +4.5 V and +16.5 V. This makes the AD558ideal for battery-operated, portable, automotive or digital main-frame applications.*For additional insight, “An IC Amplifier Users’ Guide to Decoupling,Grounding and Making Things Go Right For A change,” is availableat no charge from any Analog Devices Sales Office.AD558REV. A–6–DATA DACt W = STORAGE PULSE WIDTH = 200ns MIN t DH = DATA HOLD TIME = 10ns MIN t DS = DATA SETUP TIME = 200ns MINt SETTLING = DAC OUTPUT SETTLING TIME TO ±1/2 LSBFigure 7.AD558 TimingUSE OF V OUT SENSESeparate access to the feedback resistor of the output amplifier allows additional application versatility. Figure 8a shows how I × R drops in long lines to remote loads may be cancelled by putting the drops “inside the loop.” Figure 8b shows how the separate sense may be used to provide a higher output current by feeding back around a simple current booster.V OUTa. Compensation for I × R Drops in Output LinesV OUTb.Output Current Booster Figure e of V OUT SenseOPTIMIZING SETTLING TIMEIn order to provide single-supply operation and zero-based output voltage ranges, the AD558 output stage has a passive “pull-down” to ground. As a result, settling time for negative going output steps may be longer than for positive-going output steps. The relative difference depends on load resistance and capacitance. If a negative power supply is available, thenegative-going settling time may be improved by adding a pull-down resistor from the output to the negative supply as shown in Figure 9. The value of the resistor should be such that, at zero voltage out, current through that resistor is 0.5 mA max.BIPOLAR OUTPUT RANGESThe AD558 was designed for operation from a single power supply and is thus capable of providing only unipolar (0 V to +2.56 V and 0 V to 10 V) output ranges. If a negative supply isL= 2x V EE (in k Ω)Figure 9.Improved Settling Timeavailable, bipolar output ranges may be achieved by suitable output offsetting and scaling. Figure 10 shows how a ±1.28 volt output range may be achieved when a –5 volt power supply is available. The offset is provided by the AD589 precision 1.2 volt reference which will operate from a +5 volt supply. The AD544output amplifier can provide the necessary ±1.28 volt output swing from ±5 volt supplies. Coding is complementary offset binary.Figure 10.Bipolar Operation of AD558 from ±5 V SuppliesMEASURING OFFSET ERROROne of the most commonly specified endpoint errors associated with real-world nonideal DACs is offset error.In most DAC testing, the offset error is measured by applying the zero-scale code and measuring the output deviation from 0volts. There are some DACs, like the AD558 where offset errors may be present but not observable at the zero scale, because of other circuit limitations (such as zero coinciding with single-supply ground) so that a nonzero output at zero code cannot be read as the offset error. Factors like this make testing the AD558 a little more complicated.By adding a pulldown resistor from the output to a negative supply as shown in Figure 11, we can now read offset errors at zero code that may not have been observable due to circuit limitations. The value of the resistor should be such that, at zero voltage out, current through the resistor is 0.5 mA max.0.5mAa.0 V to 2.56 V Output RangeAD558REV. A –7–b.0 V to 10 V Output RangeFigure 11.Offset Connection DiagramsINTERFACING THE AD558 TO MICROPROCESSOR DATA BUSESThe AD558 is configured to act like a “write only” location in memory that may be made to coincide with a read only memory location or with a RAM location. The latter case allows data previously written into the DAC to be read back later via the RAM. Address decoding is partially complete for either ROM or RAM. Figure 12 shows interfaces for three popular micropro-cessor systems.GATED DECODED ADDRESS → a.6800/AD558 InterfaceDECODED ADDRESS SELECT PULSE → CSb.8080A/AD558 InterfaceDECODED ADDRESS SELECT PULSE → c.1802/AD558 InterfaceFigure 12.Interfacing the AD558 to MicroprocessorsPerformance (typical @ +25؇C, VCC ؎+5 V to +15 V unless otherwise noted)FULLSCALEERRORFigure 13.Full-Scale Accuracy vs. TemperaturePerformance of AD5580ZERO Figure 14.Zero Drift vs. Temperature Performance of AD558AD558REV. A–8–P R I N T E D I N U .S .A .C 558f –21–8/87mA 16144681012141618VOLTSI CCV CC1210Figure 15.Quiescent Current vs. Power Supply Voltage for AD558Figure 16.AD558 Settling Characteristics Detail 0 V to 2.56 V Output Range Full-Scale StepFigure 17.AD558 Settling Characteristic Detail 0 V to 10 V Output Range Full-Scale StepFigure 18.AD558 Logic TimingOUTLINE DIMENSIONSDimensions shown in inches and (mm).N (Plastic) PackageD (Ceramic) PackageP (PLCC) Package。
伊玛产品类别 (2)
三线
NC
DC PNP
200
40
2
PVC
带线
N
Y
N
IP67
否
非齐平
brass
10~36VDC
2
三线
NC
DC NPN
200
40
2
PVC
带线
N
Y
N
IP67
否
齐平
brass
10~36VDC
1
两线
NO/NC
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
齐平
brass
10~36VDC
1
两线
NO
DC PNP/NPN
10~36VDC
2
三线
NO
DC NPN
200
60
M12
接插件
N
Y
N
IP67
否
非齐平
brass
10~36VDC
2
三线
NC
DC PNP
200
60
M12
接插件
N
Y
N
IP67
否
非齐平
brass
10~36VDC
2
三线
NC
DC NPN
200
60
M12
接插件
N
Y
N
IP67
否
齐平
brass
10~36VDC
1
两线
NO/NC
200
40
2
PVC
带线
N
Y
N
IP67
放大器内置型光电传感器
导线引出式 2 导线引出式 2 导线引出式 0.2 导线引出式 2 M12 插接件 M12 插接件 导线引出式 2 导线引出式 2 M12 插接件 M12 插接件 导线引出式 5 导线引出式 2 导线引出式 2 导线引出式 2 M12 插接件 M12 插接件 导线引出式 2 导线引出式 2 M12 插接件 M12 插接件 -
460 传感器
光电开关
放大器内置型光电传感器
E3F3系列（螺纹柱状光电传感器）： ●● 具有光电 - IC 技术的抗干扰性；M18DIN - 大小的柱状外罩，ABS树脂盒 ●● BRASS外壳具有传感距离长，带灵敏度调节器的反射性产品 ●● 电源短路和逆接保护 ●● 电源电压：DC12-24V ●● 防护等级：IP66
连接方式 导线长度(m) 外壳材料 检测距离(mm)
输出方式 输出状态
导线引出式 2 导线引出式 2 导线引出式 2 导线引出式 2 M12插接件 M12插接件 M12插接件 M12插接件 导线引出式 2 导线引出式 2 导线引出式 2 导线引出式 2 M12插接件 M12插接件 M12插接件 M12插接件 导线引出式 2 导线引出式 2 导线引出式 2 导线引出式 2 M12插接件 M12插接件 M12插接件 M12插接件 导线引出式 2 导线引出式 2 导线引出式 2 M12插接件 M12插接件 M12插接件 M12插接件 -
BS EN 558-1-1996 标准
Contents
Committees responsible National foreword Foreword Text of EN 558-1 List of references
BS EN 558-1:1996
Page Inside front cover
ii 2 3 Inside back cover
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 558-1
October 1995
ICS 23.060.00
Descriptors: Industrial valves, valves-and fittings, cocks, flanged valves, metallurgical products, dimensions, generalities
Industriearmaturen — Baulängen von Armaturen aus Metall zum Einbau in Rohrleitungen mit Flanschen — Teil 1: Nach PN bezeichnete Armaturen
This European Standard was approved by CEN on 1995-10-16. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
派克核电门户网站产品说明书
10 CFR 50 • AERB • ASME QME-1* • ASME QSC (NCA-3800) • ASME 第 III 部分 • ASME U核级认证核级认证 • ASN • CNSC CRN-N* HAF 604 • IAEA SC-QA 780 298* • IEEE* • ISO 9001: •E 派克核电门户网站无论您是要建新的发电厂，还是要改进现有电厂，派克都会依照行业统一的质量保证计划，使不同部门的各种产品进入核电市场，提高生产率和利润率。
这些产品包括安全专项和安全相关的核级子系统和组件，以及为非管制工厂区提供的优质的“成熟”商品。
派克门户网站是我们投入数百万美元用于核能研究和发展的承诺之一，是我们承诺提获得越来越多在全球供应且通过认证的核能产品的单一途径。
供行业所要求的高效性、可靠性和成本效益的体现。
我们支持单源购买各种产品系列，通过最新的订购方式提高工厂生产率和利润率。
另外，我们在将近 50 个国家拥有 50,000 名员工，因而门户网站产品在全球都有供应。
有关订购门户网站产品的更多信息，请：拨打电话 256 885 3833（销售）、256 885 3880（技术支持）或 发送电子邮件至 ipdusnuclear@parker .com派克核电门户网站是根据派克现行的 NQA- 1 和 10CFR50 附录 B 规定的质量保证计划开发的，并且采用了行业及规范性文件中规定的最佳实3 级阀门的 ASME N 核级认证外，派克核电门户网站上提供的产品符合 10CFR 第 21 部分中对基本组件的规定，按照认可的质保计划或是商品级物项执行。
专项不会提高质量，而是验证并记录专用项目中已有的的质量。
EU PED*HAF 604*IAEA SC-QA KTA 3507NNSANQA-1Parker Hannifin Ltd.Tachbrook Park DriveTachbrook Park,Warwick, CV34 6TU英国电话：+44 (0) 1926 317 878传真：+44 (0) 1926 317 855********************欧洲、中东和非洲AE – 阿联酋，迪拜电话：+971 4 8127100********************AT – 奥地利，维也纳新城电话：+43 (0)2622 23501-0*************************AT – 东欧，维也纳新城电话：+43 (0)2622 23501 900****************************AZ – 阿塞拜疆，巴库电话：+994 50 2233 458****************************BE/LU – 比利时，尼韦尔电话：+32 (0)67 280 900*************************BY – 白俄罗斯，明斯克电话：+375 17 209 9399*************************CH – 瑞士，埃托瓦电话：+41 (0)21 821 87 00*****************************CZ – 捷克共和国，Klecany电话：+420 284 083 111*******************************DE – 德国，卡尔斯特电话：+49 (0)2131 4016 0*************************DK – 丹麦，巴勒鲁普电话：+45 43 56 04 00*************************ES – 西班牙，马德里电话：+34 902 330 001***********************FI – 芬兰，万塔河电话：+358 (0)20 753 2500parker. ****************FR – 法国，Contamine s/Arve电话：+33 (0)4 50 25 80 25************************GR – 希腊，雅典电话：+30 210 933 6450************************HU – 匈牙利，布达佩斯电话：+36 23 885 470*************************IE – 爱尔兰，都柏林电话：+353 (0)1 466 6370*************************IT – 意大利，Corsico (MI)电话：+39 02 45 19 21***********************KZ – 哈萨克斯坦，阿拉木图电话：+7 7273 561 000****************************NL – 荷兰，奥尔登扎尔电话：+31 (0)541 585 000********************NO – 挪威，阿斯克尔电话：+47 66 75 34 00************************PL – 波兰，华沙电话：+48 (0)22 573 24 00************************PT – 葡萄牙，莱萨·达·帕尔梅拉电话：351 22 999 7360**************************RO – 罗马尼亚，布加勒斯特电话：+40 21 252 1382*************************RU – 俄罗斯，莫斯科电话：+7 495 645-2156************************SE – 瑞典，Spånga电话：+46 (0)8 59 79 50 00************************SK – 斯洛伐克，班斯卡·比斯特里察电话：+421 484 162 252**************************SL – 斯洛文尼亚，新梅斯托电话：+386 7 337 6650**************************TR – 土耳其，伊斯坦布尔电话：+90 216 4997081************************UA – 乌克兰，基辅电话：+380 44 494 2731*************************UK – 英国，沃里克电话：+44 (0)1926 317 878********************ZA – 南非，坎普顿公园电话：+27 (0)11 961 0700*****************************北美地区CA – 加拿大，安大略省米尔顿电话：+1 905 693 3000US – 美国，克利夫兰电话：+1 216 896 3000亚太地区AU – 澳大利亚，城堡山电话：+61 (0)2-9634 7777CN – 中国，上海电话：+86 21 2899 5000HK – 香港电话：+852 2428 8008IN – 印度，孟买电话：+91 22 6513 7081-85JP – 日本，东京电话：+81 (0)3 6408 3901KR – 韩国，首尔电话：+82 2 559 0400MY – 马来西亚，莎阿南电话：+60 3 7849 0800NZ – 新西兰，惠灵顿电话：+64 9 574 1744SG – 新加坡电话：+65 6887 6300TH – 泰国，曼谷电话：+662 186 7000-99TW – 台湾，台北电话：+886 2 2298 8987南美AR – 阿根廷，布宜诺斯艾利斯电话：+54 3327 44 4129BR – 巴西，圣若泽杜斯坎普电话：+55 800 727 5374CL – 智利，圣地亚哥电话：+56 2 623 1216MX – 墨西哥，阿波达卡电话：+52 81 8156 6000核电门户网站手册 M&K 12/10 1M派克授权的本地经销商© 2010 派克汉尼汾公司派克全球办事处联系信息欧洲产品信息中心免费电话：00 800 27 27 5374(AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, IE,IL, IS, IT, LU, MT, NL, NO, PL, PT, RU, SE,SK, UK, ZA)– 一点的方式。
伊玛产品类别
18~36 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
PA1108
智慧型
7 LED
内螺纹
G 1/4
400 bar
四线
18~36 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
PA1109
智慧型
7 LED
内螺纹
G 1/4
2 bar
四线
18~36 VDC
200
60
M12
接插件
N
Y
N
IP67
否
IA0031
齐平
brass
10~36VDC
1
两线
NO
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
IA0032
齐平
brass
10~36VDC
1
两线
NC
DC PNP/NPN
200
60
M12
接插件
N
Y
N
IP67
否
IA0033
非齐平
brass
10~36VDC
可
TA1099
智慧型
7 LED
内螺纹
M18 X 1.5
-40~150°C
四线
20~30 VDC
PNP NO/NC,NPN NO/NC
4~20 mA,0~10 V
可
产品类别
压力变送器(模拟量输出)
压力变送器(开关量输出)
订货号
功能
显示
牙口形式
JC558中文资料
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1999 Apr 27பைடு நூலகம்
6
元器件交易网
Philips Semiconductors
PNP general purpose transistors
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
50HZ说明书相敏轨道电路接收器 (1)
50Hz相敏轨道电路接收器使用说明书沈阳城铁信号设备有限公司2004年6月30日1 简介50Hz相敏轨道电路接收器为室内50Hz相敏轨道电路接收设备。
包括：WXJ50-Ⅱ型微电子相敏轨道电路接收器、TFQ调相防雷器，如轨道电路接收采用双套接收，设备组成还包括BJH报警盒。
2 设备的外形及端子分配2.1 WXJ50-Ⅱ型微电子相敏轨道电路接收器外形为安全型继电器结构，其端子分配如下图所示。
KF24V轨道变压器输出-局部电源局部电源- 输出输出-报警报警-JWXC-17002.2 TFQ调相防雷器外形为安全型继电器结构，其端子分配如下图所示。
轨道1输入+ 71 81 轨道1输入-轨道1输出1+ 73 83 轨道1输出1-轨道1输出2+ 52 62 轨道1输出2-轨道2输入+ 53 63 轨道2输入-轨道2输出1+ 32 42 轨道2输出1-轨道2输出2+ 31 41 轨道2输出2- 2.3 BJH报警盒外形为安全型继电器结构，其端子分配如下图所示。
2KZ24V 72 82 KF24V接本组合所有接收器报警+ 71报警盒输出+ 52 62 报警盒输出-53 6332 4231 4133 43注：全站的报警盒的报警输出+并接，全站的报警盒的报警输出-并接驱动报警执行继电器。
每台报警盒的53、63、32、42、31、41、33、43分别接本组盒的所有相敏接收器的41。
3 50Hz相敏轨道电路接收器的技术条件3.1 WXJ50-Ⅱ型微电子相敏轨道电路接收器WXJ50-Ⅱ型微电子相敏轨道电路接收器的工作电源为直流24V±3.6V，交流分量不大于1V，由电源屏供给，也可另加独立整流电源供给。
每台接收器的耗电小于100 mA（包括驱动JWXC-1700型继电器的电流）。
WXJ50-Ⅱ型微电子相敏轨道电路接收器局部电源为110V/50Hz，由电源屏或另加独立电源供给（当电源屏没有110V输出时，每个咽喉采用一个BG2-300变压器供电，设置在继电器架上），应与轨道供电隔离。
瑞士哈弗莱公司产品手册说明书
2763 / 2767 / 2769全自动互感器试验装置特点⏹ 单台仪器测量电流及电压互感器。
⏹ 全自动测量、数字显示电流/电压比误差、相移、试验电流及电压。
⏹ 可测量互感器的一次侧和二次侧的电流和电压。
⏹ 测试变压器和标准变压器的变比可以不同。
⏹高性价比：单台标准变压器即可测试不同的变压器；不同的标准变压器和试验变压器变比无需外部分压器即可相互匹配。
⏹ 可输入交互参数以简化操作。
⏹ 测量进行期间，微处理器监控所有输入和控制。
⏹ 2 x 16字符点阵，纯语言显示错误信息。
⏹ 测量耗时短。
⏹ 动态平均。
⏹ 精度高。
⏹ 固有负载低。
⏹ 可连接至外部打印机（RS 232C 接口） ⏹ 前板设有压电晶体制键盘。
⏹产品规格遵从IEC 60044-1, IEC 60044-2; IEC 60044-3; IEC 60044-7,ANSI/IEEE C57.13-1978 和 VDE 0414, part 2标准。
⏹ 含RS 232C接口用于连接计算机。
可选配件⏹ 遥控测量过程用- IEEE 488 接口 ⏹更多可选配件参见采购信息综述TETTEX 仪器公司出产的2767型电流/电压互感器自动测试装置是一款高效、精确的互感器测量仪，专为实验室、工业生产、质量管理及官方计量站应用而设计。
随着现今质量管理标准的日益严格，测量设备的操作舒适度和可靠性越发受到关注。
该款测试仪基于最新技术开发，开创了质量、可靠性、可操作性和可维护性上的新标准，在电流/电压误差、相位差和激励电流/激励电压的测量范围上，该仪器完全符合国际标准。
该仪器经过德国物理技术研究院（PTB ）测试，校正核准，完全符合PTB 仪表变压器测试标准。
全套测试系统同时，TETTEX 仪器公司也设计并销售计算机控制电流和电压互感器测量设备，以满足客户的特定需求，它们包括： ⏹ 2767型组合测试装置，用于电流和电压比互感器测试。
⏹ 4760系列标准电流互感器（电流比较器）。
E558CNA-100035中文资料
Features
Unit: mm
Unit: mm
• Low profile SMT molded coil. • Ideal for use in RF circuit for communication and car radio applications. • Shielded case also available.
Molded Coils for Surface Mounting
continued from previous page
MC152 107
STANDARD COILS SELECTION GUIDE TYPE MC152 (cont'd)
With Case TOKO Part Number(1) Ferrite Core E558CNA-100032 E558CNA-100033 E558CNA-100034 E558CNA-100035 *E558CNA-100036 *E558CNA-100037 Brass Core E558ANA-100050 E558ANA-100051 E558ANA-100052 E558ANA-100053 E558ANA-100054 E558ANA-100055 Air Core E558HNA-100090 E558HNA-100091 E558HNA-100092 E558HNA-100093 E558HNA-100094 E558HNA-100095 Number of Turns 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 C Range** 89.0pF±1.5% 64.2pF±2.0% 48.2pF±2.0% 37.9pF±2.0% 31.9pF±2.0% 27.0pF±2.0% 92.2pF±1.0% 73.6pF±2.0% 59.1pF±2.0% 48.7pF±2.0% 41.6pF±2.0% 37.1pF±2.0% 90.7pF±10% 68.2pF±10% 52.8pF±10% 42.7pF±10% 35.5pF±10% 30.3pF±10% Q(2) 63±20% (at 100MHz) 77±20% (at 100MHz) 76±20% (at 100MHz) 81±20% (at 100MHz) 86±20% (at 100MHz) 80±20% (at 100MHz) 58±20% (at 100MHz) 55±20% (at 100MHz) 54±20% (at 100MHz) 52±20% (at 100MHz) 49±20% (at 100MHz) 47±20% (at 100MHz) 60±20% (at 100MHz) 70±20% (at 100MHz) 80±20% (at 100MHz) 80±20% (at 100MHz) 86±20% (at 100MHz) 83±20% (at 100MHz) Color Code WHITE VIOLET ORANGE YELLOW WHITE BLUE WHITE VIOLET ORANGE YELLOW WHITE BLUE WHITE VIOLET ORANGE YELLOW WHITE BLUE Inductance(3) 28nH 39nH 53nH 67nH 79nH 94nH 27nH 34nH 43nH 52nH 61nH 68nH 28nH 37nH 48nH 59nH 71nH 84nH
en60896标准
en60896标准全文共四篇示例，供读者参考第一篇示例：EN 60896标准是指国际电工委员会（IEC）制定的关于蓄电池性能测试方法和标准的规范。
该标准的主要目的是确保蓄电池能够在各种应用环境下稳定可靠地工作，比如用于电力系统、交通信号灯、紧急照明系统等。
EN 60896标准包括了多个方面的内容，包括蓄电池的设计、制造、安装、使用、维护和测试等。
其中最重要的部分是关于蓄电池性能测试的规范，这些测试可以评估蓄电池的容量、循环寿命、内阻、自放电率、恒定电流放电时间等重要指标，从而确保蓄电池的质量和性能符合要求。
根据EN 60896标准的规定，蓄电池性能测试应该在特定的环境条件下进行，比如恒定的温度、湿度和电压等。
测试过程中需要记录各项参数的变化，并根据测试结果来评估蓄电池的性能是否符合标准要求。
除了性能测试，EN 60896标准还规定了蓄电池的标识、包装、运输和存储等方面的要求。
这些规定旨在保障蓄电池在整个生命周期内的安全和可靠性。
对于生产厂家和用户来说，遵守EN 60896标准是非常重要的。
生产厂家应该严格按照标准要求生产蓄电池，确保产品质量和性能符合标准要求。
而用户在选择和使用蓄电池时，也应该参考EN 60896标准，以确保蓄电池能够在实际应用中达到预期的性能。
EN 60896标准是蓄电池行业的重要标准之一，它为蓄电池的设计、生产、使用提供了统一的规范和标准。
遵守这个标准不仅可以保障蓄电池的质量和安全，也有利于推动蓄电池行业的发展和进步。
希望更多的企业和用户能够认识到EN 60896标准的重要性，并严格遵守这些规定，共同推动蓄电池行业的可持续发展。
【本段文字约400字】上文中介绍了EN 60896标准的主要内容和意义，接下来将详细阐述蓄电池性能测试方法和标准的相关内容。
EN 60896标准中涵盖了多种蓄电池性能测试方法，其中最常见的是蓄电池容量测试。
蓄电池容量是一个重要的指标，它反映了蓄电池能够存储和释放的电能大小。
欧姆杰斯 1000μH 电感 型号 O12 产品说明书
Dimensions: [mm]768772102768772102A768772102768772102T e m p e r a t u r eT T T 768772102Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TI-HVofWürth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.•The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the component. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.•Due to heavy weight of the components, strong forces and high accelerations may have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.•Please be aware that products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODTRi004.0002020-04-07DIN ISO 2768-1mDESCRIPTIONWE-TI HV Radial Leaded WireWound Inductor (High Voltage)ORDER CODE768772102SIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODTRi004.0002020-04-07DIN ISO 2768-1mDESCRIPTIONWE-TI HV Radial Leaded WireWound Inductor (High Voltage)ORDER CODE768772102SIZE/TYPE BUSINESS UNIT STATUS PAGE。
HLMP-EG55-GJ400中文资料
SunPower SeriesHLMP-EL55HLMP-EH55HLMP-EG55T-13/4 (5 mm) Precision Optical Performance AlInGaP LED Lamps T echnical DataFeatures• Well Defined and SmoothSpatial Radiation Patterns • Wide Viewing Angle • Tinted Diffused Lamp • High Luminous Output • Colors:590/592 nm Amber615/617 nm Reddish-Orange 626/630 nm Red• High Operating Temperature:T JLED =+130°C• Superior Resistance to MoistureBenefits• Viewing Angles Match Traffic Management Sign Requirements• Colors Meet Automotive Specifications• Superior Performance in Outdoor Environments • Suitable for Autoinsertion onto PC BoardsApplications• Traffic Management:Variable Message Signs Traffic Management Signs • Commercial Indoor/Outdoor Advertising:Signs MarqueesPassenger Information • Automotive:Exterior and Interior LightsDescriptionThese Precision Optical Perform-ance AlInGaP LEDs provide superior light output forexcellent readability in sunlight and are extremely reliable.AlInGaP LED technologyprovides extremely stable light output over long periods of time.Precision Optical Performance lamps utilize the aluminum indium gallium phosphide (AlInGaP) technology.These LED lamps are tinted,diffused, T-13/4 packagesincorporating second generation optics producing well defined radiation patterns at specific viewing cone angles.There are two families of amber,red, and red-orange lamps;AlInGaP and the higher performance AlInGaP II.The high maximum LEDjunction temperature limit of +130°C enables hightemperature operation in bright sunlight conditions.These lamps are available in two package options to give the designer flexibility with devicemounting.HLMP-EL57HLMP-EH57HLMP-EG57Part Numbering SystemHLMP-x x xx-x x x xxMechanical Options00: Bulk PackagingDD: Ammo PackColor Bin Selections0: No color bin limitation4: Amber color bin 4 onlyK: Amber color bins 2 and 4 onlyMaximum Intensity BinMinimum Intensity BinViewing Angle & Lead Stand Offs55: 55 deg without lead stand offs; AlInGaP57: 55 deg without lead stand offs; AlInGaP IIColorD: 630 nm RedG: 626 nm RedH: 615/617 nm Red-OrangeL: 590/592 AmberPackageE: 5 mm RoundDevice Selection Guide (AlInGaP)TypicalViewing Color and LuminousAngle Dominant Lamps Without Standoffs Intensity Iv (mcd) [1,2] 2θ1/2Wavelength on Leads@20 mA(Deg.)[4](nm), Typ.[3](Outline Drawing A) Min. Max.55°Amber 590HLMP-EL55-GK000140400 Red-Orange 615HLMP-EH55-GK000140400 Red 626HLMP-EG55-GK000140400Device Selection Guide (AlInGaP II)TypicalViewing Color and LuminousAngle Dominant Lamps Without Standoffs Intensity Iv (mcd) [1,2] 2θ1/2Wavelength on Leads@20 mA(Deg.)[4](nm), Typ.[3](Outline Drawing A) Min. Max.55°Amber 592HLMP-EL57-LP0004001150 Red-Orange 617HLMP-EH57-LP0004001150 Red 630HLMP-ED57-LP0004001150 Notes:1. The luminous intensity is measured on the mechanical axis of the lamp package.2. The optical axis is closely aligned with the package mechanical axis.3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the lamp.4. θ1/2 is the off-axis angle where the luminous intensity is one half the on-axis intensity.Package DimensionsNOTES:1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).2. LEADS ARE MILD STEEL, SOLDER DIPPED.3. TAPERS SHOWN AT TOP OF LEADS (BOTTOM OF LAMP PACKAGE) INDICATE ANEPOXY MENISCUS THAT MAY EXTEND ABOUT 1 mm (0.040 in.) DOWN THE LEADS.4. RECOMMENDED PC BOARD HOLE DIAMETERS:LAMP PACKAGE WITHOUT STAND-OFFS: FLUSH MOUNTING AT BASE OFLAMP PACKAGE = 1.143/1.067 (0.044/0.042).Electrical/Optical Characteristics at T A = 25°CParameter Symbol Min.Typ.Max.Units Test Conditions Forward VoltageV FVI F = 20 mAAmber (λd = 590 nm) 2.02 2.4Amber (λd = 592 nm)2.15 2.4Red-Orange (λd = 615 nm) 1.94 2.4Red-Orange (λd = 617 nm) 2.08 2.4Red (λd = 626 nm) 1.90 2.4Red (λd = 630 nm) 2.00 2.4Reverse Voltage V R 520V I R = 100 µAPeak WavelengthλPEAKnm Peak of Wavelength of Amber (λd = 590 nm)592Spectral Distribution Amber (λd = 592 nm)594at I F = 20 mARed-Orange (λd = 615 nm)621Red-Orange (λd = 617 nm)623Red (λd = 626 nm)635Red (λd = 630 nm)639Spectral Halfwidth∆λ1/217nmWavelength Width at Spectral Distribution 1/2 Power Point at I F = 20 mASpeed of Response τs 20ns Exponential Time Constant, e -t/τs CapacitanceC 40pF V F = 0, f = 1 MHzThermal Resistance R θJ-PIN 240°C/W LED Junction-to-Cathode LeadLuminous Efficacy [1]ηvlm/WEmitted LuminousAmber (λd = 590 nm)480Power/Emitted Radiant Amber (λd = 592 nm)500PowerRed-Orange (λd = 615 nm)260Red-Orange (λd = 617 nm)235Red (λd = 626 nm)150Red (λd = 630 nm)155Note:1. The radiant intensity, I e , in watts per steradian, may be found from the equation I e = I v /ηv , where I v is the luminous intensity in candelas and ηv is the luminous efficacy in lumens/watt.Absolute Maximum Ratings at T A = 25°CDC Forward Current [1,2,3]..................................................................50 mA Peak Pulsed Forward Current [2,3].................................................100 mA Average Forward Current [3].............................................................30 mA Reverse Voltage (I R = 100 µA)................................................................5 V LED Junction Temperature ..............................................................130°C Operating Temperature ..................................................–40°C to +100°C Storage Temperature ......................................................–40°C to +120°C Through-the-Wave Solder Temperature ................250°C for 3 seconds [1.59 mm (0.060 in.) below body]Notes:1. Derate linearly as shown in Figure 4.2. For long term performance with minimal light output degradation, drive currentsbetween 10 mA and 30 mA are recommended. For more information on recommended drive conditions, please refer to Application Brief I-024 (5966-3087E).3. Please contact your Agilent Technologies sales representative about operating currents below 10 mA.Figure 2. Forward Current vs. Forward Voltage.Figure 3. Relative Luminous Intensity vs.Forward Current.Figure 4. Maximum Forward Current vs.Ambient Temperature. Derating Based on T JMAX = 130°C.Figure 1. Relative Intensity vs. Peak Wavelength.Figure 5. Representative Spatial Radiation Pattern for 55° Viewing Angle Lamps.WAVELENGTH – nmR E L A T I V E I N T E N S I T Y5006006507001.00.50AMBERRED-ORANGE RED550C U R R E N T – m AV F – FORWARD VOLTAGE – V R E L A T I V E L U M I N O U S I N T E N S I T Y (N O R M A L I Z E D A T 20 m A )00I F – DC FORWARD CURRENT – mA 403.02.01.51.00.520602.5I F – F O R W A R D C U R R E N T – m AT A – AMBIENT TEMPERATURE – °CR E L A T I V E I N T E N S I T Y – %1000θ – ANGULAR DISPLACEMENT – DEGREES8060507020-80-60103040-402040608010090-100-20Bin Name Min.Max.G 140180H 180240J 240310K 310400L 400520M 520680N 680880P8801150Intensity Bin Limits (mcd at 20 mA)Tolerance for each bin limit is ± 15%.Bin Name Min.Max.1584.5587.02587.0589.54589.5592.06592.0594.5Amber Color Bin Limits (nm at 20 mA)Tolerance for each bin limit is ± 0.5 nm.Note:1.Bin categories are established for classification of products. Products may not be available in all bin categories./semiconductorsFor product information and a complete list of distributors, please go to our web site.For technical assistance call:Americas/Canada: +1 (800) 235-0312 or (916) 788-6763Europe: +49 (0) 6441 92460China: 10800 650 0017Hong Kong: (+65) 6756 2394India, Australia, New Zealand: (+65) 6755 1939Japan: (+81 3) 3335-8152 (Domestic/Interna-tional), or 0120-61-1280 (Domestic Only)Korea: (+65) 6755 1989Singapore, Malaysia, Vietnam, Thailand,Philippines, Indonesia: (+65) 6755 2044Taiwan: (+65) 6755 1843Data subject to change.Copyright © 2004 Agilent Technologies, Inc.Obsoletes 5988-1855E July 13, 20045988-3460EN。
热电偶海关编码
39172900 热电偶保护管68151000 碳化硅再结晶热电偶保护管68159910.99 热电偶保护管69039000.00 热电偶保护管69141000 测温热电偶用保护管69149000 热电偶保护管71159010.90 铂铑热电偶丝71159010.90 热电偶丝72189900.00 热电偶接头材料73049000 热电偶保护套管73069000 热电偶保护管73269010 热电偶保护套管76169910 铝水测温热电偶保护套管81129900.00 热电偶材料82042000 硬质合金热电偶套筒85141010 热电偶退火炉85143000.90 热电偶/热电阻检定炉85144000.90 宽温区热电偶检定炉85144000.90 铂热电偶检定炉85168000.00 防腐型热电偶85168000.00 隔爆型热电偶85168000.00 隔爆热电偶85168000.00 机电一体化热电偶85168000.00 锅炉炉壁热电偶85168000.00 表面热电偶85333900.00 铠装式热电偶热电阻85359000.00 热电偶接线盒85365000.00 热电偶退火炉定时控温仪85366900.00 热电偶插头85369000.00 热电偶快速接头85369000.00 热电偶调理端子板85369000.00 热电偶端子85371090.00 热电偶开关盒85371090.90 端子式隔离热电偶信号转换器85415000.00 热电偶保护管85423900.00 热电偶模块85437099.90 热电偶信号调节器85437099.90 热电偶信号调理器85437099.90 智能热电偶信号调理器85439090 热电偶端子盒85439090 8通道热电偶输入模块85439090 碳化硅再结晶热电偶保护管85444219 热电偶用补偿导线85444229 热电偶补偿线85444929 热电偶用补偿导线85444929 测温仪表热电偶测线85445910 热电偶用补偿电缆85462010 热电偶瓷套管90230000 热电偶校验装置90251100 带热电偶(阻)温度变送器双金属温度计90251100.00 表面热电偶温度计90251100.00 带热电偶（阻）、温度变送器的双金属温度计90251100.00 热电偶温度计90251910 工业热电偶温度计90251910 快速热电偶专用测温仪90251990.00 热电偶测温仪90258000 快速测温热电偶90258000.00 热电偶温度表90258000.00 轴承热电偶温度计90259000 一体化热电偶温度变送器90259000 热电偶全隔离温度变送器90259000 热电偶式温度传感器90259000.00 热电偶温度传感器90259000.00 热电偶温差式温度变送器90259000.00 热电偶温度变送器90259000.00 全铠装热电偶/热电阻温度传感器90283090 热电偶计90308200 高温热电偶检定炉90308200 热电偶测量装置90308200.00 热电偶/热电阻检定炉90308200.00 热电偶检定炉90308990.00 热电偶监视仪90308990.00 热电偶热电阻自动检定系统90318090 卧式热电偶检定炉90318090 标准热电偶检定炉90318090 热电偶检定炉90318090.00 智能热电偶校验仪90318090.00 二等标准热电偶自动检定系统90318090.00 工业热电偶自动检定系统90318090.00 热电偶热电阻自动检定装置90318090.00 热电偶温度计自动检定装置90318090.00 热电偶温度校准器90318090.00 热电偶校测仪90318090.00 热电偶校验仿真仪90318090.00 热电偶过程校验仪90318090.00 热电偶参数检验仪90318090.00 热电偶测温系统90318090.00 热电偶、热电阻温度计综合自动检定装置90318090.00 热电偶校验仪90318090.90 热电偶校验仿真仪90328900 热电偶毫伏变送器90328900.00 带热电偶（阻）温度变送器90328900.00 热电偶/热电阻温度变送器90328900.00 热电偶温度变送器90328900.00 热电偶温差变送器90330000 快速取样热电偶90330000 工业装配式热电偶90330000 压簧固定热电偶90330000 柴油机专用热电偶90330000 塑料加热专用热电偶90330000 热电偶丝材90330000 带温度变送器防爆热电偶90330000 钨铼热电偶丝90330000 简易直插式热电偶90330000 测量端裸露式热电偶90330000 卡帽压簧式热电偶90330000 快速热电偶偶头90330000 高温热电偶90330000 锌液专用热电偶90330000 表面热电偶90330000 抗振耐磨热电偶90330000 装配式铂铑-铂铑热电偶90330000 装配式铂铑-铂热电偶90330000 装配式镍铬-铜镍热电偶90330000 拱顶热电偶90330000 钨铼快速微型热电偶90330000 轴承式表面热电偶90330000 表面式热电偶90330000 手柄式铠装热电偶90330000 铠装带插式热电偶90330000 高温铂铑热电偶90330000 携带式表面热电偶90330000 电厂测温耐磨热电偶/热电阻90330000 补偿导线式铠装热电偶90330000 隔爆型热电偶90330000 瓷保护式热电偶90330000 硫化床电厂用耐磨热电偶90330000 水泥厂专用耐磨热电偶90330000 吹气热电偶90330000 高温防腐热电偶90330000 炉管刀刃热电偶90330000 铁铝瓷热电偶90330000 钨铼合金热电偶90330000 电站专用热电偶/热电阻90330000 高灵敏热电偶90330000 热电偶用补偿导线合金丝90330000 电厂锅炉风粉在线系统测温专用高耐磨热电偶90330000 硫化床炉专用耐磨热电偶90330000 微型热电偶90330000 多点热电偶90330000 防火热电偶90330000 抗震耐磨热电偶90330000 特种热电偶90330000 特种铠装热电偶90330000 石油工业专用热电偶90330000 铠装防爆热电偶90330000 高温耐磨热电偶90330000 铂铑30-铂铑6热电偶90330000 陶瓷热电偶90330000 镍铬硅-镍硅热电偶90330000 铁康-铜热电偶90330000 铝水测温热电偶90330000 电机镍铬-镍硅热电偶90330000 高温耐磨抗腐蚀热电偶90330000 化工测温热电偶90330000 耐磨耐腐热电偶90330000 爆炸热电偶90330000 K型热电偶90330000 无接线盒式铠装热电偶90330000 耐腐蚀耐磨防附着热电偶90330000 工业用隔爆热电偶90330000 防溅型接线盒式铠装热电偶90330000 防爆型接线盒式铠装热电偶90330000 金属插座型铠装热电偶90330000 塑料插座型铠装热电偶90330000.00 反应烧结碳化硅热电偶90330000.00 带锥形保护管式热电偶90330000.00 装配式镍铬-镍硅热电偶90330000.00 装配式热电偶90330000.00 装配热电偶90330000.00 装配式铂铑热电偶90330000.00 装铠装热电偶90330000.00 轴承热电偶90330000.00 中温中压热电偶90330000.00 真空炉专用热电偶90330000.00 针棒热电偶90330000.00 再结晶碳化硅保护管热电偶90330000.00 针型热电偶90330000.00 针状热电偶90330000.00 温度一体化热电偶90330000 工业用隔爆热电偶90330000 防溅型接线盒式铠装热电偶90330000 防爆型接线盒式铠装热电偶90330000 金属插座型铠装热电偶90330000 塑料插座型铠装热电偶90330000.00 反应烧结碳化硅热电偶90330000.00 带锥形保护管式热电偶90330000.00 装配式镍铬-镍硅热电偶90330000.00 装配式热电偶90330000.00 装配热电偶90330000.00 装配式铂铑热电偶90330000.00 装铠装热电偶90330000.00 轴承热电偶90330000.00 中温中压热电偶90330000.00 真空炉专用热电偶90330000.00 针棒热电偶90330000.00 再结晶碳化硅保护管热电偶90330000.00 针型热电偶90330000.00 针状热电偶90330000.00 温度一体化热电偶90330000.00 无固定装置热电偶90330000.00 无固定装置式热电偶90330000.00 无保护管热电偶90330000.00 钨钼热电偶丝90330000.00 钨铼热电偶90330000.00 铁-康铜热电偶90330000.00 探头式热电偶90330000.00 碳化硅保护管热电偶90330000.00 特殊规格热电偶90330000.00 压簧热电偶配件90330000.00 压簧式热电偶90330000.00 压簧固定式热电偶90330000.00 小型热电偶90330000.00 硬质合金保护套管耐磨热电偶90330000.00 仪表热电偶90330000.00 烟道热电偶90330000.00 阳极焙烧炉专用热电偶90330000.00 石化用热电偶90330000.00 手柄式热电偶90330000.00 实体化铂铑热电偶90330000.00 渗碳炉专用特种实体热电偶90330000.00 双支铂铑30-铂铑6热电偶90330000.00 水泥行业测温专用热电偶90330000.00 热套式热电偶90330000.00 热风炉热电偶90330000.00 热风炉专用热电偶90330000.00 热电偶仪表90330000.00 热电偶元件90330000.00 热电阻/热电偶90330000.00 热电偶式毫伏变送器90330000.00 热电偶配件90330000.00 热电偶温度隔离变送器90330000.00 热电偶传感器90330000.00 热电偶传感器配件90330000.00 热电偶单双路变送器90330000.00 热电偶/毫伏信号转换变送器90330000.00 热电偶90330000.00 金属热电偶90330000.00 浸渍型快速热电偶90330000.00 浸入式金属被覆型热电偶探针90330000.00 连续测温专用热电偶90330000.00 快速通断铠装热电偶90330000.00 快速微型热电偶90330000.00 可切断式耐磨热电偶90330000.00 抗氧化钨铼热电偶90330000.00 铠装隔爆热电偶90330000.00 铠装式热电偶90330000.00 铠装热电偶丝90330000.00 铠装式铂铑热电偶90330000.00 铠装普通型热电偶90330000.00 铠装热电偶90330000.00 铠装压簧热电偶热电阻90330000.00 镍铬-康铜热电偶90330000.00 镍铬-铜镍热电偶90330000.00 耐磨陶瓷热电偶90330000.00 耐磨热电偶90330000.00 耐磨耐高温热电偶90330000.00 耐腐蚀热电偶90330000.00 耐腐蚀、耐磨和防附着热电偶90330000.00 耐腐热电偶90330000.00 钼保护测温热电偶90330000.00 螺钉固定式热电偶90330000.00 活动法兰角尺形热电偶90330000.00 活动法兰式热电偶90330000.00 弧型热电偶90330000.00 管壁炉壁热电偶90330000.00 工业测温用热电偶90330000.00 工业电热电偶90330000.00 固定螺纹式热电偶90330000.00 固定法兰式热电偶90330000.00 固定装置热电偶90330000.00 工业用热电偶90330000.00 工业用防爆热电偶90330000.00 工业用装配式热电偶90330000.00 工业热电偶90330000.00 隔爆热电偶90330000.00 隔爆式热电偶90330000.00 隔爆一体热电偶90330000.00 隔热型热电偶90330000.00 高压防爆热电偶90330000.00 高压铠装热电偶90330000.00 高炉热电偶90330000.00 高温高压热电偶90330000.00 高精度热电偶90330000.00 高温盐浴炉专用热电偶90330000.00 标准热电偶90330000.00 单支铂铑10-铂热电偶90330000.00 单支铂铑30-铂铑6热电偶90330000.00 低温低压热电偶90330000.00 电机铁芯热电偶90330000.00 二节式热电偶90330000.00 端面热电偶90330000.00 多对式铠装式热电偶90330000.00 多点铠装热电偶90330000.00 电站测温用热电偶90330000.00 电站测温专用热电偶90330000.00 电站用热电偶90330000.00 带温度变送器热电偶90330000.00 带补强管铠装热电偶90330000.00 带补强管阻内漏铠装热电偶90330000.00 高压铠装热电偶90330000.00 高炉热电偶90330000.00 高温高压热电偶90330000.00 高精度热电偶90330000.00 高温盐浴炉专用热电偶90330000.00 标准热电偶90330000.00 单支铂铑10-铂热电偶90330000.00 单支铂铑30-铂铑6热电偶90330000.00 低温低压热电偶90330000.00 电机铁芯热电偶90330000.00 二节式热电偶90330000.00 端面热电偶90330000.00 多对式铠装式热电偶90330000.00 多点铠装热电偶90330000.00 电站测温用热电偶90330000.00 电站测温专用热电偶90330000.00 电站用热电偶90330000.00 带温度变送器热电偶90330000.00 带补强管铠装热电偶90330000.00 带补强管阻内漏铠装热电偶90330000.90 装配式热电偶90330000.90 小型热电偶90330000.90 压簧固定式热电偶90330000.90 压簧热电偶90330000.90 碳化硅热电偶90330000.90 两节式热电偶90330000.90 耐腐耐磨式热电偶90330000.90 耐磨型热电偶90330000.90 镍铬-铜镍热电偶90330000.90 镍铬-镍硅热电偶90330000.90 铠装热电偶材料90330000.90 快速测温热电偶90330000.90 快速热电偶90330000.90 快速微型热电偶90330000.90 热电偶90330000.90 热电偶丝90330000.90 热电偶探针90330000.90 热电偶阻90330000.90 热套式热电偶90330000.90 普通热电偶90330000.90 气体热电偶探针90330000.90 防腐热电偶90330000.90 防爆热电偶90330000.90 铂铑-铂铑热电偶90330000.90 铂铑-铂热电偶90330000.90 测温热电偶90330000.90 电站专用热电偶90330000.90 电机铁芯热电偶90330000.90 低温低压热电偶90330000.90 标准热电偶90330000.90 表面测温热电偶探针90330000.90 高精度热电偶90330000.90 高温高压热电偶90330000.90 工业用装配式热电偶90330000.90 工业用热电偶90330000.90 压簧式热电偶90330000.90 工业热电偶90330000.90 隔爆式热电偶90330000.90 铠装式热电偶90330000.90 装配热电偶90330000.90 循环流化床耐磨热电偶90330000.90 铂铑热电偶90330000.90 保护帽式铠装热电偶90330000.90 高炉热电偶。
Multi 9系列终端配电产品 说明书
1 / 11Multi 9系列终端配电产品小型断路器及漏电保护附件 ..................................................................................................1/2C65 + Vigi C65 .....................................................................................................................................................1/2C120 + Vigi C120 ...............................................................................................................................................1/13NG125+VigiNG125+NG125附件....................................................................................................................1/16C65H-DC/C65L-DC .........................................................................................................................................1/21C65,DPNK2,DPNa/N/H,C120附件与辅助装置 ......................................................1/24DPNa/N/H 系列断路器及漏电保护断路器 ...............................................................1/25INT125 隔离开关 ..........................................................................................................................1/27ID 漏电开关 ......................................................................................................................................1/28PC 导轨插座 .....................................................................................................................................1/29终端配电箱及连接附件 ..........................................................................................................1/30电涌保护器 .......................................................................................................................................1/33模块化电涌保护器............................................................................................................................................1/33信号类电涌保护器............................................................................................................................................1/37控制与保护元件 ...........................................................................................................................1/39时间管理元件.....................................................................................................................................................1/39延时继电器 .........................................................................................................................................................1/39命令控制元件.....................................................................................................................................................1/39照明控制元件.....................................................................................................................................................1/41测量元件..............................................................................................................................................................1/41Easy 9系列终端配电产品EA9AN.................................................................................................................................................................1/44EA9AH ................................................................................................................................................................1/46EA9A45/EA9A47 ..............................................................................................................................................1/47EA9D/EA9C .......................................................................................................................................................1/48EA9B ....................................................................................................................................................................1/49EA9R ....................................................................................................................................................................1/50EA9F/EA9X .........................................................................................................................................................1/52EA9L .....................................................................................................................................................................1/53Easy9-K 系列 ......................................................................................................................................................1/54SE-BOX 系列 .......................................................................................................................................................1/55Kaedra 多功能高防护配电箱 .............................................................................................1/60PK 低压工业插头插座 ...............................................................................................................1/62终端配电产品本章节产品价格自2010年2月1日起正式执行1 / 21Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型917190C65N 1P B1A 79.40订购产品917191C65N 1P B2A 50.00订购产品917192C65N 1P B3A 46.10订购产品917193C65N 1P B4A 46.10订购产品917194C65N 1P B6A 38.30订购产品917195C65N 1P B10A 28.10订购产品917196C65N 1P B16A 28.10订购产品917197C65N 1P B20A 28.10订购产品917198C65N 1P B25A 31.50订购产品917199C65N 1P B32A 31.50订购产品917200C65N 1P B40A 38.30订购产品917201C65N 1P B50A 46.10订购产品917202C65N 1P B63A 50.60订购产品917203C65N 2P B1A 182.00订购产品917204C65N 2P B2A 115.80订购产品917205C65N 2P B3A 106.90订购产品917206C65N 2P B4A 106.90订购产品917207C65N 2P B6A 91.20订购产品917208C65N 2P B10A 68.80订购产品917209C65N 2P B16A 68.80订购产品917210C65N 2P B20A 68.80订购产品917211C65N 2P B25A 75.50订购产品917212C65N 2P B32A 75.50订购产品917213C65N 2P B40A 92.30订购产品917214C65N 2P B50A 104.70订购产品917215C65N 2P B63A 111.40订购产品917216C65N 3P B1A 237.20订购产品917217C65N 3P B2A 170.60订购产品917218C65N 3P B3A 157.60订购产品917219C65N 3P B4A 157.60订购产品917220C65N 3P B6A 135.00订购产品917221C65N 3P B10A 109.10订购产品917222C65N 3P B16A 109.10订购产品917223C65N 3P B20A 109.10订购产品917224C65N 3P B25A 118.10订购产品917225C65N 3P B32A 118.10订购产品917226C65N 3P B40A 140.70订购产品917227C65N 3P B50A 157.60订购产品917228C65N 3P B63A 168.70订购产品917229C65N 4P B1A 353.00订购产品917230C65N 4P B2A 231.40订购产品917231C65N 4P B3A 213.80订购产品917232C65N 4P B4A 213.80订购产品917233C65N 4P B6A 180.10订购产品917234C65N 4P B10A 146.30订购产品917235C65N 4P B16A 146.30订购产品917236C65N 4P B20A 146.30订购产品917237C65N 4P B25A 157.60订购产品917238C65N 4P B32A 157.60订购产品917239C65N 4P B40A 185.60订购产品917240C65N 4P B50A 208.10订购产品917241C65N 4P B63A 225.00订购产品C65N 断路器技术参数 标 准: IEC 60898/GB 10963 脱扣曲线：B/C/D 额定电压：1P AC 230V 2/3/4P AC 400V 额定电流：1-63A 分断能力：6kA 9171969172099172229172351 / 31Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型17867C65N 1P C1A 52.50各物流中心库存产品17868C65N 1P C2A 48.90各物流中心库存产品17870C65N 1P C4A 45.30各物流中心库存产品17871C65N 1P C6A 37.60各物流中心库存产品17873C65N 1P C10A 27.50各物流中心库存产品17874C65N 1P C16A 27.50各物流中心库存产品17875C65N 1P C20A 27.50各物流中心库存产品17876C65N 1P C25A 30.90各物流中心库存产品17877C65N 1P C32A 30.90各物流中心库存产品17878C65N 1P C40A 37.60各物流中心库存产品17879C65N 1P C50A 45.30各物流中心库存产品17880C65N 1P C63A 49.70各物流中心库存产品17881C65N 2P C1A 118.20各物流中心库存产品17882C65N 2P C2A 113.50各物流中心库存产品17884C65N 2P C4A 104.80各物流中心库存产品17885C65N 2P C6A 89.40各物流中心库存产品17887C65N 2P C10A 67.30各物流中心库存产品17888C65N 2P C16A 67.30各物流中心库存产品17889C65N 2P C20A 67.30各物流中心库存产品17890C65N 2P C25A 73.90各物流中心库存产品17891C65N 2P C32A 73.90各物流中心库存产品17892C65N 2P C40A 90.50各物流中心库存产品17893C65N 2P C50A 102.60各物流中心库存产品17894C65N 2P C63A 109.20各物流中心库存产品17895C65N 3P C1A 176.70各物流中心库存产品17896C65N 3P C2A 167.30各物流中心库存产品17898C65N 3P C4A 154.50各物流中心库存产品17899C65N 3P C6A 132.40各物流中心库存产品17900C65N 3P C10A 107.00各物流中心库存产品17902C65N 3P C16A 107.00各物流中心库存产品17903C65N 3P C20A 107.00各物流中心库存产品17904C65N 3P C25A 115.80各物流中心库存产品17905C65N 3P C32A 115.80各物流中心库存产品17906C65N 3P C40A 137.90各物流中心库存产品17907C65N 3P C50A 154.50各物流中心库存产品17908C65N 3P C63A 165.50各物流中心库存产品17909C65N 4P C1A 236.60各物流中心库存产品17910C65N 4P C2A 226.90各物流中心库存产品17912C65N 4P C4A 209.70各物流中心库存产品17913C65N 4P C6A 176.50各物流中心库存产品17914C65N 4P C10A 143.40各物流中心库存产品17916C65N 4P C16A 143.40各物流中心库存产品17917C65N 4P C20A 143.40各物流中心库存产品17918C65N 4P C25A 154.50各物流中心库存产品17919C65N 4P C32A 154.50各物流中心库存产品17920C65N 4P C40A 182.00各物流中心库存产品17921C65N 4P C50A 204.00各物流中心库存产品17922C65N 4P C63A 220.60各物流中心库存产品178741788817902179161 / 41Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型17924C65N 1P D1A 69.80各物流中心库存产品17925C65N 1P D2A 69.80各物流中心库存产品17927C65N 1P D4A 64.40各物流中心库存产品17928C65N 1P D6A 46.40各物流中心库存产品17929C65N 1P D10A 38.60各物流中心库存产品17931C65N 1P D16A 38.60各物流中心库存产品17932C65N 1P D20A 38.60各物流中心库存产品17933C65N 1P D25A 44.10各物流中心库存产品17934C65N 1P D32A 44.10各物流中心库存产品17935C65N 1P D40A 50.80各物流中心库存产品17987C65N 1P D50A 58.90各物流中心库存产品17988C65N 1P D63A 67.90各物流中心库存产品17936C65N 2P D1A 159.10各物流中心库存产品17937C65N 2P D2A 159.10各物流中心库存产品17939C65N 2P D4A 147.20各物流中心库存产品17940C65N 2P D6A 113.00各物流中心库存产品17941C65N 2P D10A 91.50各物流中心库存产品17943C65N 2P D16A 91.50各物流中心库存产品17944C65N 2P D20A 91.50各物流中心库存产品17945C65N 2P D25A 104.10各物流中心库存产品17946C65N 2P D32A 104.10各物流中心库存产品17947C65N 2P D40A 118.70各物流中心库存产品17989C65N 2P D50A 135.60各物流中心库存产品17990C65N 2P D63A 158.30各物流中心库存产品17948C65N 3P D1A 232.70各物流中心库存产品17949C65N 3P D2A 232.70各物流中心库存产品17951C65N 3P D4A 214.90各物流中心库存产品17952C65N 3P D6A 158.30各物流中心库存产品17953C65N 3P D10A 141.30各物流中心库存产品17955C65N 3P D16A 141.30各物流中心库存产品17956C65N 3P D20A 141.30各物流中心库存产品17957C65N 3P D25A 152.70各物流中心库存产品17958C65N 3P D32A 152.70各物流中心库存产品17959C65N 3P D40A 158.30各物流中心库存产品17991C65N 3P D50A 180.80各物流中心库存产品17992C65N 3P D63A 209.30各物流中心库存产品17960C65N 4P D1A 287.90各物流中心库存产品17961C65N 4P D2A 287.90各物流中心库存产品17963C65N 4P D4A 265.70各物流中心库存产品17964C65N 4P D6A 226.20各物流中心库存产品17965C65N 4P D10A 209.30各物流中心库存产品17967C65N 4P D16A 209.30各物流中心库存产品17968C65N 4P D20A 209.30各物流中心库存产品17969C65N 4P D25A 214.90各物流中心库存产品17985C65N 4P D32A 214.90各物流中心库存产品17986C65N 4P D40A 226.20各物流中心库存产品17993C65N 4P D50A 260.30各物流中心库存产品17994C65N 4P D63A 299.80各物流中心库存产品179311794317955179671 / 51C65H 断路器技术参数 标 准: IEC 60898/GB 10963脱扣曲线: B/C/D 额定电压: 1P AC 230V 2/3/4P AC 400V 额定电流: 1-63A 分断能力: 10kA Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型917500C65H 1P 1A B 230/400V 10kA 67.10订购产品917501C65H 1P 2A B 230/400V 10kA 60.70订购产品917502C65H 1P 3A B 230/400V 10kA 57.20订购产品917503C65H 1P 4A B 230/400V 10kA 57.20订购产品917504C65H 1P 6A B 230/400V 10kA 47.30订购产品917505C65H 1P 10A B 230/400V 10kA 34.80订购产品917506C65H 1P 16A B 230/400V 10kA 34.80订购产品917507C65H 1P 20A B 230/400V 10kA 34.80订购产品917508C65H 1P 25A B 230/400V 10kA 40.00订购产品917509C65H 1P 32A B 230/400V 10kA 40.00订购产品917510C65H 1P 40A B 230/400V 10kA 47.30订购产品917511C65H 1P 50A B 230/400V 10kA 57.20订购产品917512C65H 1P 63A B 230/400V 10kA 63.50订购产品917513C65H 2P 1A B 400V 10kA 153.00订购产品917514C65H 2P 2A B 400V 10kA 138.50订购产品917515C65H 2P 3A B 400V 10kA 130.70订购产品917516C65H 2P 4A B 400V 10kA 130.70订购产品917517C65H 2P 6A B 400V 10kA 114.30订购产品917518C65H 2P 10A B 400V 10kA 85.70订购产品917519C65H 2P 16A B 400V 10kA 85.70订购产品917520C65H 2P 20A B 400V 10kA 85.70订购产品917521C65H 2P 25A B 400V 10kA 94.60订购产品917522C65H 2P 32A B 400V 10kA 94.60订购产品917523C65H 2P 40A B 400V 10kA 115.60订购产品917524C65H 2P 50A B 400V 10kA 130.70订购产品917525C65H 2P 63A B 400V 10kA 136.90订购产品917526C65H 3P 1A B 400V 10kA 232.30订购产品917527C65H 3P 2A B 400V 10kA 211.00订购产品917528C65H 3P 3A B 400V 10kA 198.80订购产品917529C65H 3P 4A B 400V 10kA 198.80订购产品917530C65H 3P 6A B 400V 10kA 167.80订购产品917531C65H 3P 10A B 400V 10kA 136.90订购产品917532C65H 3P 16A B 400V 10kA 136.90订购产品917533C65H 3P 20A B 400V 10kA 136.90订购产品917534C65H 3P 25A B 400V 10kA 149.20订购产品917535C65H 3P 32A B 400V 10kA 149.20订购产品917536C65H 3P 40A B 400V 10kA 174.00订购产品917537C65H 3P 50A B 400V 10kA 198.80订购产品917538C65H 3P 63A B 400V 10kA 211.40订购产品917539C65H 4P 1A B 400V 10kA 312.60订购产品917540C65H 4P 2A B 400V 10kA 283.70订购产品917541C65H 4P 3A B 400V 10kA 267.40订购产品917542C65H 4P 4A B 400V 10kA 267.40订购产品917543C65H 4P 6A B 400V 10kA 224.00订购产品917544C65H 4P 10A B 400V 10kA 180.30订购产品917545C65H 4P 16A B 400V 10kA 180.30订购产品917546C65H 4P 20A B 400V 10kA 180.30订购产品917547C65H 4P 25A B 400V 10kA 198.80订购产品917548C65H 4P 32A B 400V 10kA 198.80订购产品917549C65H 4P 40A B 400V 10kA 230.00订购产品917550C65H 4P 50A B 400V 10kA 261.20订购产品917551C65H 4P 63A B 400V 10kA 279.80订购产品9175199175329175459175061 / 61Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型17570C65H 1P C1A 66.50 各物流中心库存产品17571C65H 1P C2A 60.10 各物流中心库存产品17573C65H 1P C4A 56.70 各物流中心库存产品17574C65H 1P C6A 46.90 各物流中心库存产品17575C65H 1P C10A 34.40 各物流中心库存产品17577C65H 1P C16A 34.40 各物流中心库存产品17578C65H 1P C20A 34.40 各物流中心库存产品17579C65H 1P C25A 39.60 各物流中心库存产品17580C65H 1P C32A 39.60 各物流中心库存产品17581C65H 1P C40A 46.9 0各物流中心库存产品17582C65H 1P C50A 56.70 各物流中心库存产品17583C65H 1P C63A 62.90 各物流中心库存产品 17584C65H 2P C1A 151.50 各物流中心库存产品17585C65H 2P C2A 137.20 各物流中心库存产品17587C65H 2P C4A 129.40 各物流中心库存产品17588C65H 2P C6A 113.20 各物流中心库存产品17589C65H 2P C10A 84.80 各物流中心库存产品17591C65H 2P C16A 84.80 各物流中心库存产品17592C65H 2P C20A 84.80 各物流中心库存产品17593C65H 2P C25A 93.60 各物流中心库存产品17594C65H 2P C32A 93.60 各物流中心库存产品17595C65H 2P C40A 114.40 各物流中心库存产品17596C65H 2P C50A 129.40 各物流中心库存产品17597C65H 2P C63A 135.50 各物流中心库存产品 17643C65H 3P C1A 230.00 各物流中心库存产品17644C65H 3P C2A 209.00 各物流中心库存产品17646C65H 3P C4A 196.80 各物流中心库存产品17747C65H 3P C6A 166.10 各物流中心库存产品17661C65H 3P C10A 135.50 各物流中心库存产品17663C65H 3P C16A 135.50 各物流中心库存产品17664C65H 3P C20A 135.50 各物流中心库存产品17665C65H 3P C25A 147.80 各物流中心库存产品17668C65H 3P C32A 147.80 各物流中心库存产品17669C65H 3P C40A 172.3 0各物流中心库存产品17671C65H 3P C50A 196.80 各物流中心库存产品17672C65H 3P C63A 209.40 各物流中心库存产品 17673C65H 4P C1A 309.60 各物流中心库存产品17674C65H 4P C2A 280.90 各物流中心库存产品17676C65H 4P C4A 264.80 各物流中心库存产品17677C65H 4P C6A 221.80 各物流中心库存产品17678C65H 4P C10A 178.60 各物流中心库存产品17680C65H 4P C16A 178.60 各物流中心库存产品17681C65H 4P C20A 178.60 各物流中心库存产品17767C65H 4P C25A 196.80 各物流中心库存产品17768C65H 4P C32A 196.80 各物流中心库存产品17769C65H 4P C40A 227.80 各物流中心库存产品17770C65H 4P C50A 258.70 各物流中心库存产品17771C65H 4P C63A 277.00 各物流中心库存产品175771759117663176801 / 71Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型17772C65H 1P D1A 89.10 各物流中心库存产品17773C65H 1P D2A 89.10 各物流中心库存产品17775C65H 1P D4A 84.10 各物流中心库存产品17776C65H 1P D6A 60.70 各物流中心库存产品17777C65H 1P D10A 50.80 各物流中心库存产品17779C65H 1P D16A 50.80 各物流中心库存产品17780C65H 1P D20A 50.80 各物流中心库存产品17781C65H 1P D25A 58.20 各物流中心库存产品17782C65H 1P D32A 58.20 各物流中心库存产品17783C65H 1P D40A 66.70 各物流中心库存产品17784C65H 1P D50A 76.80 各物流中心库存产品17785C65H 1P D63A 89.00 各物流中心库存产品 17786C65H 2P D1A 203.40 各物流中心库存产品17787C65H 2P D2A 203.40 各物流中心库存产品17789C65H 2P D4A 191.60 各物流中心库存产品17790C65H 2P D6A 148.40 各物流中心库存产品17791C65H 2P D10A 120.00 各物流中心库存产品17793C65H 2P D16A 120.00 各物流中心库存产品17794C65H 2P D20A 120.00 各物流中心库存产品17795C65H 2P D25A 136.00 各物流中心库存产品17796C65H 2P D32A 136.00 各物流中心库存产品17797C65H 2P D40A 154.60 各物流中心库存产品17798C65H 2P D50A 179.40 各物流中心库存产品17799C65H 2P D63A 210.40 各物流中心库存产品 17800C65H 3P D1A 301.80 各物流中心库存产品17801C65H 3P D2A 301.80 各物流中心库存产品17803C65H 3P D4A 284.50 各物流中心库存产品17804C65H 3P D6A 210.40 各物流中心库存产品17805C65H 3P D10A 185.40 各物流中心库存产品17807C65H 3P D16A 185.40 各物流中心库存产品17808C65H 3P D20A 185.40 各物流中心库存产品17809C65H 3P D25A 198.00 各物流中心库存产品17810C65H 3P D32A 198.00 各物流中心库存产品17811C65H 3P D40A 210.40 各物流中心库存产品17812C65H 3P D50A 235.30 各物流中心库存产品17813C65H 3P D63A 272.10 各物流中心库存产品 17814C65H 4P D1A 367.40 各物流中心库存产品17815C65H 4P D2A 367.40 各物流中心库存产品17817C65H 4P D4A 346.40 各物流中心库存产品17818C65H 4P D6A 297.00 各物流中心库存产品17819C65H 4P D10A 272.10 各物流中心库存产品17821C65H 4P D16A 272.10 各物流中心库存产品17822C65H 4P D20A 272.10 各物流中心库存产品17823C65H 4P D25A 284.50 各物流中心库存产品17824C65H 4P D32A 284.50 各物流中心库存产品17825C65H 4P D40A 297.00 各物流中心库存产品17826C65H 4P D50A 340.20 各物流中心库存产品17827C65H 4P D63A 395.90 各物流中心库存产品178231780817779177931 / 81C65H ICB 断路器技术参数 标 准: IEC 60947-2/GB 14048.2脱扣特性: 12 In ±20%单磁式额定电压: 1P AC 230V 2/3/4P AC 400V 额定电流: 1-40A 分断能力: 10kA Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型MGN25881C65H ICB 1P 1A 88.20订购产品MGN25885C65H ICB 1P 2A 88.20订购产品MGN25889C65H ICB 1P 4A 83.30订购产品MGN25893C65H ICB 1P 6A 60.10订购产品MGN25897C65H ICB 1P 10A 50.30订购产品MGN25901C65H ICB 1P 16A 50.30订购产品MGN25905C65H ICB 1P 20A 50.30订购产品MGN25909C65H ICB 1P 25A 57.60订购产品MGN25913C65H ICB 1P 32A 57.60订购产品MGN25917C65H ICB 1P 40A 66.00订购产品MGN25882C65H ICB 2P 1A 201.40订购产品MGN25886C65H ICB 2P 2A 201.40订购产品MGN25890C65H ICB 2P 4A 189.70订购产品MGN25894C65H ICB 2P 6A 146.90订购产品MGN25898C65H ICB 2P 10A 118.80订购产品MGN25902C65H ICB 2P 16A 118.80订购产品MGN25906C65H ICB 2P 20A 118.80订购产品MGN25910C65H ICB 2P 25A 134.70订购产品MGN25914C65H ICB 2P 32A 134.70订购产品MGN25918C65H ICB 2P 40A 153.10订购产品MGN25883C65H ICB 3P 1A 298.80订购产品MGN25887C65H ICB 3P 2A 298.80订购产品MGN25891C65H ICB 3P 4A 281.70订购产品MGN25895C65H ICB 3P 6A 208.30订购产品MGN25899C65H ICB 3P 10A 183.60订购产品MGN25903C65H ICB 3P 16A 183.60订购产品MGN25907C65H ICB 3P 20A 183.60订购产品MGN25911C65H ICB 3P 25A 196.00订购产品MGN25915C65H ICB 3P 32A 196.00订购产品MGN25919C65H ICB 3P 40A 208.30订购产品MGN25884C65H ICB 4P 1A 363.80订购产品MGN25888C65H ICB 4P 2A 363.80订购产品MGN25892C65H ICB 4P 4A 343.00订购产品MGN25896C65H ICB 4P 6A 294.10订购产品MGN25900C65H ICB 4P 10A 269.40订购产品MGN25904C65H ICB 4P 16A 269.40订购产品MGN25908C65H ICB 4P 20A 269.40订购产品MGN25912C65H ICB 4P 25A 281.70订购产品MGN25916C65H ICB 4P 32A 281.70订购产品MGN25920C65H ICB 4P 40A 294.10订购产品MGN25893MGN25894MGN25895MGN258961 / 91C65L 断路器技术参数 标 准: IEC 60947-2/GB14048.2脱扣曲线: C/D 额定电压: 1P AC 230V 2/3/4P AC 400V 额定电流: 1-63A 分断能力: 15kA Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型917036C65L 1P C1A 95.90 中央仓库库存产品917037C65L 1P C2A 86.6 0中央仓库库存产品917038C65L 1P C4A 81.8 0中央仓库库存产品917039C65L 1P C6A 67.4 0中央仓库库存产品917040C65L 1P C10A 49.6 0中央仓库库存产品917041C65L 1P C16A 49.6 0中央仓库库存产品917042C65L 1P C20A 49.6 0中央仓库库存产品917043C65L 1P C25A 56.9 0中央仓库库存产品917044C65L 1P C32A 56.9 0中央仓库库存产品917045C65L 1P C40A 67.4 0中央仓库库存产品917046C65L 1P C50A 81.8 0中央仓库库存产品917047C65L 1P C63A 103.5 0中央仓库库存产品 917048C65L 2P C1A 218.3 0中央仓库库存产品917049C65L 2P C2A 197.6 0中央仓库库存产品917050C65L 2P C4A 186.2 0中央仓库库存产品917051C65L 2P C6A 163.4 0中央仓库库存产品917052C65L 2P C10A 122.5 0中央仓库库存产品917053C65L 2P C16A 122.5 0中央仓库库存产品917054C65L 2P C20A 122.5 0中央仓库库存产品917055C65L 2P C25A 134.8 0中央仓库库存产品917056C65L 2P C32A 134.8 0中央仓库库存产品917057C65L 2P C40A 165.0 0中央仓库库存产品917058C65L 2P C50A 186.2 0中央仓库库存产品917059C65L 2P C63A 250.8 0中央仓库库存产品 917060C65L 3P C1A 331.1 0中央仓库库存产品917061C65L 3P C2A 301.2 0中央仓库库存产品917062C65L 3P C4A 283.8 0中央仓库库存产品917063C65L 3P C6A 239.4 0中央仓库库存产品917064C65L 3P C10A 195.1 0中央仓库库存产品917065C65L 3P C16A 195.1 0中央仓库库存产品917066C65L 3P C20A 195.1 0中央仓库库存产品917067C65L 3P C25A 212.9 0中央仓库库存产品917068C65L 3P C32A 212.9 0中央仓库库存产品917069C65L 3P C40A 248.3 0中央仓库库存产品917070C65L 3P C50A 283.8 0中央仓库库存产品917071C65L 3P C63A 344.8 0中央仓库库存产品 917072C65L 4P C1A 445.9 0中央仓库库存产品917073C65L 4P C2A 404.5 0中央仓库库存产品917074C65L 4P C4A 381.3 0中央仓库库存产品917075C65L 4P C6A 319.5 0中央仓库库存产品917076C65L 4P C10A 257.1 0中央仓库库存产品917077C65L 4P C16A 257.1 0中央仓库库存产品917078C65L 4P C20A 257.1 0中央仓库库存产品917079C65L 4P C25A 283.8 0中央仓库库存产品917080C65L 4P C32A 283.8 0中央仓库库存产品917081C65L 4P C40A 328.4 0中央仓库库存产品917082C65L 4P C50A 372.7 0中央仓库库存产品917083C65L 4P C63A 484.7 0中央仓库库存产品9170429170549170669170781 / 101Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型917084C65L 1P D1A 127.80 中央仓库库存产品917085C65L 1P D2A 127.8 0中央仓库库存产品917086C65L 1P D4A 120.6 0中央仓库库存产品917087C65L 1P D6A 86.9 0中央仓库库存产品917088C65L 1P D10A 72.9 0中央仓库库存产品917089C65L 1P D16A 72.9 0中央仓库库存产品917090C65L 1P D20A 72.9 0中央仓库库存产品917091C65L 1P D25A 83.4 0中央仓库库存产品917092C65L 1P D32A 83.4 0中央仓库库存产品917093C65L 1P D40A 95.70 中央仓库库存产品917094C65L 1P D50A 110.2 0中央仓库库存产品917095C65L 1P D63A 118.6 0中央仓库库存产品 917096C65L 2P D1A 291.6 0中央仓库库存产品917097C65L 2P D2A 291.6 0中央仓库库存产品917098C65L 2P D4A 274.80 中央仓库库存产品917099C65L 2P D6A 212.90 中央仓库库存产品917100C65L 2P D10A 172.10 中央仓库库存产品917101C65L 2P D16A 172.1 0中央仓库库存产品917102C65L 2P D20A 172.1 0中央仓库库存产品917103C65L 2P D25A 195.10 中央仓库库存产品917104C65L 2P D32A 195.10 中央仓库库存产品917105C65L 2P D40A 221.90 中央仓库库存产品917106C65L 2P D50A 257.10 中央仓库库存产品917107C65L 2P D63A 280.20 中央仓库库存产品 917108C65L 3P D1A 417.40 中央仓库库存产品917109C65L 3P D2A 417.4 0中央仓库库存产品917110C65L 3P D4A 393.50 中央仓库库存产品917111C65L 3P D6A 301.80 中央仓库库存产品917112C65L 3P D10A 266.00 中央仓库库存产品917113C65L 3P D16A 266.00 中央仓库库存产品917114C65L 3P D20A 266.00 中央仓库库存产品917115C65L 3P D25A 283.80 中央仓库库存产品917116C65L 3P D32A 283.80 中央仓库库存产品917117C65L 3P D40A 301.8 0中央仓库库存产品917118C65L 3P D50A 337.00 中央仓库库存产品917119C65L 3P D63A 370.70中央仓库库存产品 917120C65L 4P D1A 526.90 中央仓库库存产品917121C65L 4P D2A 526.9 0中央仓库库存产品917122C65L 4P D4A 496.80 中央仓库库存产品917123C65L 4P D6A 425.7 0中央仓库库存产品917124C65L 4P D10A 390.3 0中央仓库库存产品917125C65L 4P D16A 390.3 0中央仓库库存产品917126C65L 4P D20A 390.30 中央仓库库存产品917127C65L 4P D25A 408.20 中央仓库库存产品917128C65L 4P D32A 408.20 中央仓库库存产品917129C65L 4P D40A 425.70 中央仓库库存产品917130C65L 4P D50A 487.9 0中央仓库库存产品917131C65L 4P D63A 527.2 0中央仓库库存产品9171269171149170909171021Vigi C65 漏电保护附件 技术参数 标 准: IEC 61009/GB 16917 额定电压: AC 230/400V 额定电流: ELE In ≤40A, In ≤63A ELM In ≤32A, In ≤40A, In ≤63A 额定剩余动作电流：30mA/AC 类,30mA/A 类,300mA/AC 类,100mA/AC 类Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型Vigi C65 ELE 漏电保护附件(30mA)17301Vigi C65 1P+N 40A ELE 104.60 各物流中心库存产品17435Vigi C65 1P+N 63A ELE 137.00各物流中心库存产品 17302Vigi C65 2P 40A ELE 104.60各物流中心库存产品17436Vigi C65 2P 63A ELE 137.00 各物流中心库存产品 17303Vigi C65 3P 40A ELE 142.90各物流中心库存产品17437Vigi C65 3P 63A ELE 194.10 各物流中心库存产品 17304Vigi C65 4P 40A ELE 178.30 各物流中心库存产品17438Vigi C65 4P 63A ELE 239.90 各物流中心库存产品 Vigi C65 ELE G 具有过压保护的漏电附件(30mA) 17311Vigi C65 G 1P+N 40A ELE 128.50中央仓库库存产品17445Vigi C65 G 1P+N 63A ELE 204.00中央仓库库存产品 17312Vigi C65 G 2P 40A ELE 128.50中央仓库库存产品17446Vigi C65 G 2P 63A ELE 204.00中央仓库库存产品 Vigi C65 ELM 漏电保护附件(30mA) 17472Vigi C65 2P 32A ELM 237.90 各物流中心库存产品17322Vigi C65 2P 40A ELM 256.30 各物流中心库存产品17476Vigi C65 2P 63A ELM 416.20 各物流中心库存产品 17473Vigi C65 3P 32A ELM 291.40 各物流中心库存产品17323Vigi C65 3P 40A ELM 337.90 各物流中心库存产品17477Vigi C65 3P 63A ELM 511.50 各物流中心库存产品 17474Vigi C65 4P 32A ELM 344.90 各物流中心库存产品17324Vigi C65 4P 40A ELM 407.60 各物流中心库存产品17478Vigi C65 4P 63A ELM 606.70 各物流中心库存产品Vigi C65 ELE A 型 漏电保护附件(30mA)917331Vigi C65 ELE 1P+N 40A 30mA A 129.50 中央仓库库存产品917332Vigi C65 ELE 2P 40A 30mA A 129.50 中央仓库库存产品917333Vigi C65 ELE 3P 40A 30mA A 185.70 中央仓库库存产品917334Vigi C65 ELE 4P 40A 30mA A 231.80 中央仓库库存产品917455Vigi C65 ELE 1P+N 63A 30mA A 178.20 中央仓库库存产品917456Vigi C65 ELE 2P 63A 30mA A 178.20 中央仓库库存产品917457Vigi C65 ELE 3P 63A 30mA A 252.30 中央仓库库存产品917458Vigi C65 ELE 4P 63A 30mA A 311.80 中央仓库库存产品1747217311173011Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型Vigi C65 ELE 漏电保护附件(300mA)917305AC 型 300mA 2P 40A 110.1 0中央仓库库存产品917306AC 型 300mA 3P 40A 150.1 0中央仓库库存产品917307AC 型 300mA 4P 40A 187.40 中央仓库库存产品917315AC 型 300mA S 2P 40A 116.60 订购产品917316AC 型 300mA S 3P 40A 159.20 订购产品917317AC 型 300mA S 4P 40A 198.30 订购产品917440AC 型 300mA 2P 63A 143.90 中央仓库库存产品917441AC 型 300mA 3P 63A 204.1 0中央仓库库存产品917442AC 型 300mA 4P 63A 252.00 中央仓库库存产品917450AC 型 300mA S 2P 63A 152.60 订购产品917451AC 型 300mA S 3P 63A 216.00 订购产品917452AC 型 300mA S 4P 63A 267.00 订购产品 Vigi C65 ELM 漏电保护附件(300mA) 917486AC 型 300mA 2P 63A 499.40 订购产品917487AC 型 300mA 3P 63A 613.8 0订购产品917488AC 型 300mA 4P 63A 728.00 订购产品917496AC 型 300mA S 2P 63A 599.2 0订购产品917497AC 型 300mA S 3P 63A 736.60 订购产品917498AC 型 300mA S 4P 63A 873.50 订购产品 Vigi C65 ELE 漏电保护附件(100mA) 917327Vigi C65 2P ELE 40A 100mA AC 125.60 订购产品917328Vigi C65 3P ELE 40A 100mA AC 171.40 订购产品917329Vigi C65 4P ELE 40A 100mA AC 214.0 0订购产品917407Vigi C65 2P ELE 63A G 100mA AC 244.80 订购产品917402Vigi C65 2P ELE 63A 100mA AC 164.40 订购产品917403Vigi C65 3P ELE 63A 100mA AC 232.80 订购产品917404Vigi C65 4P ELE 63A 100mA AC 287.90 订购产品917412Vigi C65 2P ELE 63A s 100mA AC 197.40 订购产品917413Vigi C65 3P ELE 63A s 100mA AC 279.40 订购产品917414Vigi C65 4P ELE 63A s 100mA AC 345.40 订购产品 Vigi C65 ELM 漏电保护附件(100mA) 917417Vigi C65 2P ELM 63A 100mA AC 499.40 订购产品917418Vigi C65 3P ELM 63A 100mA AC 613.80 订购产品917419Vigi C65 4P ELM 63A 100mA AC 728.00 订购产品K 系列 断路器及漏电保护断路器911503DPNK2-K 1P+N 32A C 230V 6kA 52.40中央仓库库存产品911504DPNK2-K 1P+N 40A C 230V 6kA 62.70中央仓库库存产品911508C65N-K 1P 10A C 230V 6kA 27.50中央仓库库存产品911509C65N-K 1P 16A C 230V 6kA 27.50中央仓库库存产品911510C65N-K 1P 20A C 230V 6kA 27.50中央仓库库存产品MGN911515DPNa-K C 1040.70各物流中心库存产品MGN911516DPNa-K C 1640.70各物流中心库存产品MGN911517DPNa-K C 2040.70各物流中心库存产品MGN911522DPNa vigi-K C 10 30mA 119.20各物流中心库存产品MGN911523DPNa vigi-K C 16 30mA 119.20各物流中心库存产品MGN911524DPNa vigi-K C 20 30mA 119.20各物流中心库存产品9173059174869173279174171C120H 断路器技术参数标 准: IEC 60898/GB 10963脱扣曲线: B/C/D 额定电压: AC 230/400V 额定电流: 63-125A 分断能力: 10kA Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型C120 H 19560C120H 2P B 125A 458.40订购产品 19558C120H 3P B 100A 928.60订购产品 19559C120H 3P B 125A 1,000.00订购产品19800C120H 1P C 63A 113.90 各物流中心库存产品19808C120H 1P C 80A 125.70 各物流中心库存产品19816C120H 1P C 100A 139.00 各物流中心库存产品19824C120H 1P C 125A 181.10 各物流中心库存产品 19801C120H 2P C 63A 278.30 各物流中心库存产品19809C120H 2P C 80A 285.40 各物流中心库存产品19817C120H 2P C 100A 318.00 各物流中心库存产品19825C120H 2P C 125A 401.10 各物流中心库存产品 19802C120H 3P C 63A 352.90 各物流中心库存产品19810C120H 3P C 80A 373.70 各物流中心库存产品19818C120H 3P C 100A 397.30 各物流中心库存产品19826C120H 3P C 125A 543.40 各物流中心库存产品 19803C120H 4P C 63A 536.00各物流中心库存产品19811C120H 4P C 80A 562.30 各物流中心库存产品19819C120H 4P C 100A 625.1 0各物流中心库存产品19827C120H 4P C 125A 803.70 各物流中心库存产品 19804C120H 1P D 63A 115.70 各物流中心库存产品19812C120H 1P D 80A 127.60 各物流中心库存产品19820C120H 1P D 100A 144.40 各物流中心库存产品19828C120H 1P D 125A 182.30 各物流中心库存产品 19805C120H 2P D 63A 285.30各物流中心库存产品19813C120H 2P D 80A 289.80 各物流中心库存产品19821C120H 2P D 100A 323.00 各物流中心库存产品19829C120H 2P D 125A 407.60 各物流中心库存产品 19806C120H 3P D 63A 358.30 各物流中心库存产品19814C120H 3P D 80A 379.40 各物流中心库存产品19822C120H 3P D 100A 415.60 各物流中心库存产品19830C120H 3P D 125A 526.50 各物流中心库存产品19807C120H 4P D 63A 538.90 各物流中心库存产品19815C120H 4P D 80A 570.80各物流中心库存产品19823C120H 4P D 100A 634.80 各物流中心库存产品19831C120H 4P D 125A 801.30 各物流中心库存产品198101982819831198291Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型C120 L 19832C120L 1P 63A C 151.80 订购产品19840C120L 1P 80A C 167.60 订购产品19848C120L 1P 100A C 185.30 订购产品19856C120L 1P 125A C 241.50 订购产品19833C120L 2P 63A C 371.00 订购产品19841C120L 2P 80A C 380.50 订购产品19849C120L 2P 100A C 424.10 订购产品19857C120L 2P 125A C 534.80 订购产品19834C120L 3P 63A C 470.50 订购产品19842C120L 3P 80A C 498.20 订购产品19850C120L 3P 100A C 529.80 订购产品19858C120L 3P 125A C 724.50 订购产品19835C120L 4P 63A C 714.70 订购产品19843C120L 4P 80A C 749.70 订购产品19851C120L 4P 100A C 833.50 订购产品19859C120L 4P 125A C 1,071.60 订购产品19836C120L 1P 63A D 154.30 订购产品19844C120L 1P 80A D 170.20 订购产品19852C120L 1P 100A D 192.50 订购产品19860C120L 1P 125A D 243.00 订购产品19837C120L 2P 63A D 380.40 订购产品19845C120L 2P 80A D 386.50 订购产品19853C120L 2P 100A D 430.60 订购产品19861C120L 2P 125A D 543.50 订购产品19838C120L 3P 63A D 477.70 订购产品19846C120L 3P 80A D 505.90 订购产品19854C120L 3P 100A D 554.10 订购产品19862C120L 3P 125A D 702.00 订购产品19839C120L 4P 63A D 718.50 订购产品19847C120L 4P 80A D 761.10 订购产品19855C120L 4P 100A D 846.50 订购产品19863C120L 4P 125A D 1,068.30 订购产品19842198601986319861C120L 断路器技术参数标 准: IEC 60898/GB 10963脱扣曲线: C/D 额定电压: AC 230/400V 额定电流: 63-125A 分断能力: 15kA1Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型Vigi C12018563AC class 30mA 2P 1,311.80中央库存产品18564AC class 300mA 2P 801.00 中央库存产品18544AC class 300mAs 2P 983.00 订购产品 18566AC class 30mA 3P 1,445.70 中央库存产品18567AC class 300mA 3P 895.50 中央库存产品18568AC class 500mA 3P 811.00 订购产品18546AC class 300mAs 3P 1,143.90 订购产品 18569AC class 30mA 4P 1,558.60 中央库存产品18570AC class 300mA 4P 938.00 中央库存产品18571AC class 500mA 4P 895.50 中央库存产品18548AC class 300mAs 4P 1,207.30 中央库存产品Vigi C120电磁式漏电保护附件技术参数标 准: IEC 61009/GB 16917额定电压: AC 230/400V 额定电流: ≤125A 额定剩余动作电流: 30/300/500/300 s mA/AC 类1856318566185691NG125H 断路器技术参数标 准: IEC 60947-2/GB 14048.2脱扣曲线: C/D 最大工作电压: AC 500V 额定电流: 10-80A 分断能力: 36kA Reference 订货号Description 说明 Unit Price 单价(RMB) Delivery 物流中心存货类型18705NG125H C 10A 1P 214.80 中央仓库库存产品18706NG125H C 16A 1P 214.80 中央仓库库存产品18707NG125H C 20A 1P 214.80 订购产品18708NG125H C 25A 1P 214.80 订购产品18709NG125H C 32A 1P 214.80 订购产品18710NG125H C 40A 1P 221.40 订购产品18711NG125H C 50A 1P 221.40 订购产品18712NG125H C 63A 1P 221.40 订购产品18713NG125H C 80A 1P 276.90 订购产品 18714NG125H C 10A 2P 410.20 中央仓库库存产品18715NG125H C 16A 2P 410.20 中央仓库库存产品18716NG125H C 20A 2P 410.20 中央仓库库存产品18717NG125H C 25A 2P 410.20 中央仓库库存产品18718NG125H C 32A 2P 410.20 中央仓库库存产品18719NG125H C 40A 2P 430.00 中央仓库库存产品18720NG125H C 50A 2P 430.00 订购产品18721NG125H C 63A 2P 430.00 订购产品18722NG125H C 80A 2P 516.00 订购产品 18723NG125H C 10A 3P 625.30 中央仓库库存产品18724NG125H C 16A 3P 625.30 中央仓库库存产品18725NG125H C 20A 3P 625.30 中央仓库库存产品18726NG125H C 25A 3P 625.30 中央仓库库存产品18727NG125H C 32A 3P 625.30 中央仓库库存产品18728NG125H C 40A 3P 651.20 中央仓库库存产品18729NG125H C 50A 3P 651.20 中央仓库库存产品18730NG125H C 63A 3P 651.20 中央仓库库存产品18731NG125H C 80A 3P 781.50中央仓库库存产品 18732NG125H C 10A 4P 794.50 订购产品18733NG125H C 16A 4P 794.50 订购产品18734NG125H C 20A 4P 794.50 订购产品18735NG125H C 25A 4P 794.50 订购产品18736NG125H C 32A 4P 794.50 中央仓库库存产品18737NG125H C 40A 4P 814.20 中央仓库库存产品18738NG125H C 50A 4P 814.20 中央仓库库存产品18739NG125H C 63A 4P 814.20 中央仓库库存产品18740NG125H C 80A 4P 977.00订购产品18712187211873018739。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
30.0pF± 2%
* Minimum inductance values with core 2 turns above top of bobbin. ** C Range shows tolerance.
continued on next page
元器件交易网
TYPE
STANDARD COILS SELECTION GUIDE
(1) Alternate use of brass core will increase the usable frequency of any specific coil form, however inductance is reduced. These cores may also be substituted for ferrite as a means of lowering Q. (2) Q measured by Q meter (3) Inductance measured by HP-4191A at 100MHz for reference only.
Unshielded Shielded
Features
Unit: mm
Unit: mm
• Low profile SMT molded coil. • Ideal for use in RF circuit for communication and car radio applications. • Shielded case also available.
* Minimum inductance values with core 2 turns above top of bobbin. ** C Range shows tolerance.
元器件交易网wห้องสมุดไป่ตู้
TYPE
106 MC152
Molded Coils for Surface Mounting
MC152
Close Wound Frequency Range: 30-150MHz (with ferrite core) Inductance Range: 29~142nH (without case) 27~94nH (with case) Temperature Coefficient: 150±100ppm/°C (without case) 100±100ppm/°C (with case)
Molded Coils for Surface Mounting
continued from previous page
MC152 107
STANDARD COILS SELECTION GUIDE TYPE MC152 (cont'd)
With Case TOKO Part Number(1) Ferrite Core E558CNA-100032 E558CNA-100033 E558CNA-100034 E558CNA-100035 *E558CNA-100036 *E558CNA-100037 Brass Core E558ANA-100050 E558ANA-100051 E558ANA-100052 E558ANA-100053 E558ANA-100054 E558ANA-100055 Air Core E558HNA-100090 E558HNA-100091 E558HNA-100092 E558HNA-100093 E558HNA-100094 E558HNA-100095 Number of Turns 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 C Range** 89.0pF±1.5% 64.2pF±2.0% 48.2pF±2.0% 37.9pF±2.0% 31.9pF±2.0% 27.0pF±2.0% 92.2pF±1.0% 73.6pF±2.0% 59.1pF±2.0% 48.7pF±2.0% 41.6pF±2.0% 37.1pF±2.0% 90.7pF±10% 68.2pF±10% 52.8pF±10% 42.7pF±10% 35.5pF±10% 30.3pF±10% Q(2) 63±20% (at 100MHz) 77±20% (at 100MHz) 76±20% (at 100MHz) 81±20% (at 100MHz) 86±20% (at 100MHz) 80±20% (at 100MHz) 58±20% (at 100MHz) 55±20% (at 100MHz) 54±20% (at 100MHz) 52±20% (at 100MHz) 49±20% (at 100MHz) 47±20% (at 100MHz) 60±20% (at 100MHz) 70±20% (at 100MHz) 80±20% (at 100MHz) 80±20% (at 100MHz) 86±20% (at 100MHz) 83±20% (at 100MHz) Color Code WHITE VIOLET ORANGE YELLOW WHITE BLUE WHITE VIOLET ORANGE YELLOW WHITE BLUE WHITE VIOLET ORANGE YELLOW WHITE BLUE Inductance(3) 28nH 39nH 53nH 67nH 79nH 94nH 27nH 34nH 43nH 52nH 61nH 68nH 28nH 37nH 48nH 59nH 71nH 84nH
TYPE MC152
Without Case TOKO Part Number(1) Ferrite Core E558CN-100020 E558CN-100021 E558CN-100022 E558CN-100023 *E558CN-100024 *E558CN-100025 Air Core E558HN-100096 E558HN-100097 E558HN-100098 E558HN-100099 E558HN-100100 E558HN-100101 Brass Core E558AN-100040 E558AN-100041 E558AN-100042 E558AN-100043 E558AN-100044 E558AN-100045 Number of Turns 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 1 1 /2 2 1 /2 3 1 /2 4 1 /2 5 1 /2 6 1 /2 C Range** 80.4pF±2% 53.8pF±3% 37.0pF±3% 28.0pF±3% 22.7pF±3% 17.8pF±3% 86.9pF±10% 61.2pF±10% 44.9pF±10% 34.6pF±10% 27.9pF±10% 22.9pF±10% 88.6pF± 66.5pF± 52.4pF± 44.1pF± 35.3pF± 1% 3% 3% 2% 2% Q(2) 90±20% (at 100MHz) 110±20% (at 100MHz) 110±20% (at 100MHz) 115±20% (at 100MHz) 120±20% (at 100MHz) 120±20% (at 100MHz) 85±20% (at 100MHz) 100±20% (at 100MHz) 105±20% (at 100MHz) 105±20% (at 100MHz) 120±20% (at 100MHz) 120±20% (at 100MHz) 52±20% (at 100MHz) 63±20% (at 100MHz) 56±20% (at 100MHz) 50±20% (at 100MHz) 50±20% (at 100MHz) 50±20% (at 100MHz) Color Code WHITE VIOLET ORANGE YELLOW WHITE BLUE WHITE VIOLET ORANGE YELLOW WHITE BLUE WHITE VIOLET ORANGE YELLOW WHITE BLUE Inductance(3) 32nH 47nH 68nH 90nH 112nH 142nH 29nH 41nH 56nH 73nH 91nH 111nH 29nH 38nH 48nH 57nH 72nH 84nH