74099-1007中文资料
1007#系列
2468#26
7/0.16
√7*0.16*1.155＝0.5
≦0.8
20080#28
12/0.1
√12*0.1*1.155＝0.4
≦0.7
20080#26
18/0.10
√18*0.1*1.155＝0.5
≦0.8
2651＃26
7/0.16
√7*0.16*1.155＝0.5
≦0.8
2651＃28
7/0.127
√7*0.127*1.155＝0.4
≦0.7
1533#30
7/0.10
√7*0.1*1.155＝0.3(芯線)
≦0.5
1.如規格相同之司勞線按此標準檢驗.
2.如客戶有特殊要求則按工程圖紙生＝0.6(地線)
≦1.0
1533#28
7/0.127
√7*0.127*1.155＝0.4(芯線)
≦0.7
1007#26
7/0.16
√7*0.16*1.155＝0.5
≦0.8
1007#24
11/0.16
√11*0.16*1.155＝0.6
≦0.9
1007#22
17/0.16
√17*0.16*1.155＝0.8
≦1.2
1007#20
21/0.18
√21*0.18*1.155＝1.0
≦1.4
1007#14
文件編號
KW-WP-158
文件類別
作業標準書
文件名稱
各型號線材與鍍錫線口OD尺寸對照表
版本
A
類別編號
BZ-030
制定部門
品保工程部
制定日期
2002-5-30
修訂號
2008报关员考试商品归类代码说明（第74章）
商品名称编码附加编码附加序号说明 铜锍 74011000 - 001 - 沉积铜 74012000 - 001 - 泥铜 74012000 - 002 - 粗铜 74020000 - 001 未精炼,供电解精炼⽤ 电解精炼⽤的铜阳极 74020000 - 002 未精炼 磷铜阳极 74020000 - 003 未精炼,供电解精炼⽤ 泡铜 74020000 - 004 未精炼,供电解精炼⽤ 铜电阳极 74020000 - 005 未精炼,供电解精炼⽤ 铜阳极 74020000 - 006 未精炼,供电解精炼⽤ 未精炼铜 74020000 - 007 供电解精炼⽤ 电解精炼铜 74031100 - 001 未锻轧,阴极及阴极型材 电解铜 74031100 - 002 未锻轧的精炼铜,阴极及阴极型材 负极⽚ 74031100 - 003 未锻轧的精炼铜 铜⽚ 74031100 - 004 未锻轧的精炼铜,阴极及阴极型材 铜胚 74031300 - 001 未锻轧精炼铜的坯段 红铜 74031900 - 001 未锻轧精炼铜,阴极线锭坯段除外 红铜锭 74031900 - 002 未锻轧精炼铜,阴极线锭坯段除外 红铜块 74031900 - 003 未锻轧精炼铜,阴极线锭坯段除外 铜 74031900 - 004 未锻轧精炼铜,阴极线锭坯段除外 铜锭 74031900 - 005 未锻轧精炼铜,阴极线锭坯段除外 铜⾓ 74031900 - 006 未锻轧精炼铜,阴极线锭坯段除外 铜粒 74031900 - 007 未锻轧精炼铜,阴极线锭坯段除外 铜料 74031900 - 008 未锻轧精炼铜,阴极线锭坯段除外 黄铜 74032100 - 001 未锻轧的 黄铜锭 74032100 - 002 未锻轧的 黄铜块 74032100 - 003 未锻轧的 铜锭 74032100 - 004 未锻轧的，黄铜 铜锭(黄铜) 74032100 - 005 - 铜粒 74032100 - 006 未锻轧的，黄铜 青铜 74032200 - 001 未锻轧的 青铜锭 74032200 - 002 未锻轧的。
7409中文资料
Note The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed The device should not be operated at these limits The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation
14-Lead Molded Dual-In-Line Package (N) Order Number DM7409N NS Package Number N14A
3
元器件交易网
5409 DM7409 Quad 2-Input AND Gates with Open-Collector Outputs
元器件交易网
5409 DM7409 Quad 2-Input AND Gates with Open-Collector Outputs
June 1989
5409 DM7409 Quad 2-Input AND Gates with Open-Collector Outputs
b 55
5409 Nom 5 Max 55 Min 4 75 2 08 55 16 125 0
DM7409 Nom 5 Max 5 25
74477110;中文规格书,Datasheet资料
description :A B = Start of winding 33% Umgebungstemperatur / temperature:+20°C100% SnPT 06-09-07SST05-06-22MST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27JH00-12-06Name Datum / dateHP 4274 A für/for L und/and Q POWER-CHOKE WE-PDF Werkstoffe & Zulassungen / material & approvals :G Eigenschaften / general specifications :D Prüfgeräte / test equipment :E Testbedingungen / test conditions :It is recommended that the temperature of the part does 2SFBW 155°CLuftfeuchtigkeit / humidity:HP 34401 A für/for I DC und/and R DCDATUM / DATE : 2005-06-22Datum / date..................................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................................Kunde / customerWürth Elektronik..................................................................................Freigabe erteilt / general release:not exceed 125°C under worst case operating conditions.Basismaterial / base material: Endoberfläche / finishing electrode:Draht / wire:Umgebungstemp. / ambient temperature: -40°C - + 85°C Betriebstemp. / operating temperature: -40°C - + 125°C Anbindung an Elektrode / soldering wire to plating:Ferrit/ferrite Sn/Ag/Cu - 96.5/3.0/0.5%12,0 ± 0,312,0 ± 0,3Typ LÄnderung / modificationVersion 1Version 2Version 3Version 4Version 5Version 6Version 7• Markingdescription :PT 06-09-07SST05-06-22MST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27JH00-12-06Name Datum / dateWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400POWER-CHOKE WE-PDDATUM / DATE : 2005-06-22.................................................................................................................Geprüft / checked Kontrolliert / approvedDatum / dateUnterschrift / signature Würth ElektronikH Induktivitätskurve / Inductance curve :Freigabe erteilt / general release:Kunde / customer....................................................................................................................................................................Änderung / modificationVersion 1Version 2Version 3Version 4Version 5Version 6Version 7description :A 12,7B 16,0a 330,0± 0,5mm b 20,20± 0,2mm+ 0,5- 1,0d100,0± 0,2mmPT 06-09-07SST05-06-22MST 04-10-11MST 03-12-10RT 03-03-03MST02-03-27JH00-12-06Name Datum / datePOWER-CHOKE WE-PDDATUM / DATE : 2005-06-22Gurtspezifikation / Tape specification: Rollenspezifikation / Reel specification:Freigabe erteilt / general release:Kunde / customerc 13,00mm ....................................................................................................................................................................Datum / dateUnterschrift / signature Würth Elektronik................................................................................................................. Geprüft / checked Kontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGD-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Änderung / modificationVersion 1Version 2Version 3Version 4Version 5Version 6Version 7The force for tearing off cover tape is10 to 130 grams in arrow directionfeeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 74477110。
74649-1004中文资料
FEATURES AND SPECIFICATIONS2.00 by 2.25mm (.079 by .089") Pitch 5-Row, 6-Row and 8-Row VHDM-HSD ™Module-to-BackplaneConnector SystemFeatures and Benefitss Up to 5.0 Gbps bandwidth per signal pair enables state-of-the-art system design and performance s2.00 by 2.25mm (.079 by .089”) pitch provides real signal density of 10 differential pairs for 5-row and 6-row and 15 differential pairs for 8-row per centimeter (25 and 38 pairs respectively per inch) sMinimum distance between daughtercards:– 5-row system offers 15.00mm (.591")– 6-row system offers 18.00mm (.709")– 8-row system offers 22.00mm (.866")sGround planes between signal columns provide tightly controlled impedance for rise times down to 50 picoseconds (10-90%). This ensures very low cross talk between signals within and between columnssGround pins are in the same grid as signal pins, allowing wider channels for PCB routing and traces up to 0.25mm (.010”) wides6-row or 8-row VHDM-HSD wafers can be applied to the same stiffener as standard VHDM ® 6-row or 8-row wafers. The combination of VHDM and VHDM-HSD wafers, grouped together in the same stiffener, provides cost effective solutions to different performance parametersThe Very High Density Metric High Speed Differential (VHDM-HSD) connector system has been expanded to include 5-row, 6-row and 8-row daughtercard and backplane modules. VHDM-HSD is designed for differential-pair architecture applications that require very high interconnect density and signal integrity in a single-ended configuration.The same great modularity features and components ofVHDM are provided in the VHDM-HSD. The 5-row and 6-row systems feature 2 signal pairs per column and the8-row system features 3 signal pairs per column inincrements of 10 and 25 columns. All circuits areutilized as signal circuits without the need to use some asground circuits.The daughtercard connector consists of a metal stiffener just as with the VHDM system. The system combines the signal wafers, power modules and guidance modules into one continuous connector that can be ordered as a single specific part number. The card pitch of the VHDM-HSD 8-row system is the same as the standard VHDM 8-row system, allowing both signal wafer types for single ended and differential pair to be used together. Thismodularity and design flexibility allow engineers toincorporate both connector systems on the sameplatforms. The system is based on a 2.00mm (.079")pitch and includes vertical and right angle products thatcan be configured up to 2000 circuits. The maximumlength of a daughtercard connector on a single stiffeneris 300mm (12").The backplane connectors feature headers with open ends for continuous side-to-side stacking and headers with guide pins and polarizing keys on either end to aid in proper alignment of the mating daughtercard. The power modules occupy just a small width and hold sequentially matable pins that each manage 10.0 amps of current.Molex offers application tooling for pressing VHDM-HSD connectors into PCBs as separate modules or as complete assemblies. VHDM-HSD cable assemblies are also available for connecting backplane headers to high-performance cables.Note: VHDM and VHDM-HSD are trademarks or registered trademarks of Teradyne,Inc.元器件交易网FEATURES AND SPECIFICATIONS2.00 by 2.25mm (.079 by .089") Pitch 5-Row, 6-Row and 8-Row VHDM-HSD ™Module-to-Backplane Connector SystemPress Fit Right Angle ReceptacleApplicationsThe VHDM-HSD products are used in very high speed, short rise-time, high circuit count applications connecting daughtercards to the backplane:s Network Switches s Routerss Computer Serverss Telecommunication Equipment sInternetworking DevicesORDERING INFORMATIONDaughtercard AssemblyConfiguration 5-Row 6-Row 8-Row Signal wafers, power modules and guide modules sequentiallyassigned by application VHDM-HSD wafers74670-XXXX 74880-XXXX 74680-XXXX Combination of VHDM and VHDM-HSD wafers74686-XXXX 74886-XXXX74686-XXXXBackplane Header Signal Module Standard Loaded Pin Height 0.76µm (30µ”) Gold5-Row6-Row8-Row10-Column 25-Column 10-Column 25-Column 10-Column 25-Column Open Ended4.25mm (.167”)74695-100374695-250374979-100374979-250374649-100374649-25034.75mm (.187”)74695-100174695-250174979-100174979-250174649-100174649-25015.15mm (.203”)74695-100474695-250474979-100474979-250474649-100474649-25046.25mm (.266”)74695-100274695-250274979-100274979-250274649-100274649-2502Left Guide PinNo Polarizing Key 4.25mm (.167”)74696-100374696-2503––74650-100374650-25034.75mm (.187”)74696-100174696-2501––74650-100174650-25015.15mm (.203”)74696-100474696-2504––74650-100474650-25046.25mm (.266”)74696-100274696-2502––74650-100274650-2502Left Guide Pin“A” Polarizing Key 4.25mm (.167”)74696-101374696-2513––74650-101374650-25134.75mm (.187”)74696-101174696-2511––74650-101174650-25115.15mm (.203”)74696-101474696-2514––74650-101474650-25146.25mm (.266”)74696-101274696-2512––74650-101274650-2512Right Guide PinNo Polarizing Key 4.25mm (.167”)74697-100374697-2503––74651-100374651-25034.75mm (.187”)74697-100174697-2501––74651-100174651-25015.15mm (.203”)74697-100474697-2504––74651-100474651-25046.25mm (.266”)74697-100274697-2502––74651-100274651-2502Right Guide Pin“A” Polarizing Key 4.25mm (.167”)74697-101374697-2513––74651-101374651-25134.75mm (.187”)74697-101174697-2511––74651-101174651-25115.15mm (.203”)74697-101474697-2514––74651-101474651-25146.25mm (.266”)74697-101274697-2512––74651-101274651-2512Backplane Power and Guide Components5-Row and 6-Row 8-Row Power Module 74029-600074029-8000Keying Post 74069-001074069-0010Guide Pin74076-0001/000274076-0001/0002Americas Headquarters Lisle, Illinois 60532 U.S.A.1-800-78MOLEX amerinfo@ Far East North Headquarters Yamato, Kanagawa, Japan 81-462-65-2324feninfo@ Far East South Headquarters Jurong, Singapore 65-6-268-6868fesinfo@ European Headquarters Munich, Germany 49-89-413092-0eurinfo@ Corporate Headquarters 2222 Wellington Ct.Lisle, IL 60532 U.S.A.630-969-4550Visit our Web site at /product/backplan/hsd.htmlOrder No. USA-158 Rev. 2Printed in USA/2.5K/JI/JI/2003.03©2003, MolexNote: VHDM and VHDM-HSD are trademarks or registered trademarks of Teradyne,Inc.元器件交易网。
仓库辅料编码
存货编码存货名称存货大类编码计量单位组编码 主计量单位编码计量单位组类别启用日期存货代码规格型号F11038500001辅料-液状类F11010050F11-0385-00001固化剂聚脂彩色漆固化剂 F11038500002辅料-液状类F11010050F11-0385-00002固化剂DA-1F11038600001辅料-液状类F11010040F11-0386-00001石膏粉F11038700001辅料-液状类F11010050F11-0387-00001香蕉水F11038800001辅料-液状类F11010020F11-0388-00001502胶水F11038900001辅料-液状类F11010020F11-0389-00001淡金水F11039000001辅料-液状类F11010020F11-0390-00001无水乙醇（酒精）F11039100001辅料-液状类F11010050F11-0391-00001黄色漆DA-1F11039200001辅料-液状类F11010050F11-0392-00001灰色漆UL800-7038F11039300001辅料-液状类F11010050F11-0393-00001树脂漆F11039400001辅料-液状类F11010050F11-0394-00001古像黑漆F11039500001辅料-液状类F11010050F11-0395-00001内墙乳胶漆F11039600001辅料-液状类F11010020F11-0396-00001彩色喷漆F11039700001辅料-液状类F11010020F11-0397-00001密封胶F11039800001辅料-液状类F11010050F11-0398-00001环氧树脂地坪漆F11039900001辅料-液状类F11010050F11-0399-00001外墙乳胶漆F11040000001辅料-液状类F11010050F11-0400-00001金属黑漆F11040100001辅料-液状类F11010050F11-0401-00001稀释剂DA-1F11040100002辅料-液状类F11010050F11-0401-00002稀释剂7400F11040100003辅料-液状类F11010050F11-0401-00003稀释剂环氧沥青稀释剂F11040200001辅料-液状类F11010050F11-0402-00001防锈剂WD-40F11040300001辅料-液状类F11010050F11-0403-00001锁固剂F11040400001辅料-液状类F11010050F11-0404-00001探伤剂F11040500001辅料-液状类F11010020F11-0405-00001酸性玻璃胶F11040600001辅料-液状类F11010020F11-0406-00001瞬干胶 LT406 20gF11040700001辅料-液状类F11010020F11-0407-00001AB胶F11040800001辅料-液状类F11010020F11-0408-00001固持胶LT641 F11040900001辅料-液状类F11010050F11-0409-00001龙胆紫F11041000001辅料-液状类F11010050F11-0410-00001热胶粉F11041100001辅料-液状类F11010050F11-0411-00001黄色地漆销售默认计量单位编码采购默认计量单位编码库存默认计量单位编码成本默认计量单位编码是否委外是否销售是否外购是否自制是否生产耗用是否在制是否应税劳务是否成套件是否折扣是否质检是否切除尾数是否受托代销税率单位重量单位体积计价方式计划价或售价最高进价参考成本最新成本最低售价参考售价主要供货单位编码默认仓库编码费用率销售加成率同步BOM仓库零售价格最高库存最低库存安全库存积压标准替换件货位编码入库超额上限出库超额上限合理损耗率上次盘点日期存货ABC分类盘点周期盘点周期单位盘点日是否保质期管理保质期天数保质期预警天数是否条形码管理对应条形码编码是否批次管理是否出库跟踪入库是否呆滞积压是否单独存放净重停用日期质量要求说明建档人变更人计划策略变更日期再订货点方法批量规则保证供应天数订货点平均耗用量固定供应量固定提前期累计提前期生产国别生产地点生产企业产地通用名称国际非专利名剂型包装规格注册商标批件批准文号或注册证号注册商标合格证号生产许可证号入关证号进口药品注册证号处方药或非处方药是否特殊药品存货是否有自由项1存货是否有自由项2存货是否有自由项3存货是否有自由项4存货是否有自由项5存货是否有自由项6存货是否有自由项7存货是否有自由项8存货是否有自由项9存货是否有自由项10存货自定义项1存货自定义项2存货自定义项3存货自定义项4存货自定义项5存货自定义项6存货自定义项7存货自定义项8存货自定义项9存货自定义项10存货自定义项11存货自定义项12存货自定义项13存货自定义项14存货自定义项15存货自定义项16录入日期录入员。
Agilent 8890 5977C Series gas chromatograph mass s
Agilent 5977C GC/MSD SystemThe Agilent 8890/5977C Series gas chromatograph/mass selective detector (GC/MSD) builds on a tradition of leadership in GC and MS technology, with the world’s most competitive performance and productivity features.Agilent GC/MSD system featuresAgilent 5977C GC/MSD — the most sensitive and robust MSD provides:–Four EI source options including the revolutionary high-efficiency source (HES), which offers the industry’s lowest instrument detection limit (IDL) and bestcarrier gas applications.signal-to-noise ratio (S/N) and a HydroInert source for H2– A heated monolithic quartz gold quadrupole (heatable up to 200 °C) for rapid elimination of contamination to keep the analyzer clean.– A second-generation triple-axis detector (TAD) for eliminating neutral noise.–Scan speeds up to 20,000 u/sec (extractor ion source and HES).–An optional oil-free IDP-3 roughing pump: a cleaner, quieter, and greener alternative (for use with turbo molecular pump systems).10-Year value promiseSupport is guaranteed for 10 years from the date of purchase, or Agilent will provide credit for the residual value of the system toward a model upgrade.Installation checkout specifications Agilent verifies GC/MSD system performance at the customer site.IDL is a statistically based metricthat more accurately confirms system performance than an S/N measurement. Test specificationsare based on splitless injection intoan Agilent J&W HP-5ms Ultra Inert30 m × 0.25 mm, 0.25 μm column for helium and a 20 m × 0.18 mm, 0.18 μm column for HydroInert with hydrogen. IDL analyses use lab helium (hydrogen for HydroInert) with GC gas filters installed. See more about the IDL test at /Library/ technicaloverviews/Public/5990-8341EN.pdf* IDL was statistically derived at 99% confidence level from the area precision of eight sequential splitless injections of OFN (octafluoronaphthalene). Demonstration of IDL specifications require a compatible system configuration, including a liquid autosampler with a 5 μL syringe.–HES IDL was measured using 10 fg injection, 1 µL injection.–Other IDLs were measured using 100 fg, 1 µL injection.–A 30 m column was used for helium IDL checkout; a 20 m column was used for hydrogenIDL checkout.–Helium carrier gas for Installation Specifications of the HES, Extractor, and Stainless steel sources; hydrogen carrier gas for Installation Specification of the HydroInert source only.–Reference IDL specifications from the above table will be confirmed only when purchased as an additional service with a compatible new system (GC and MS) installation.Signal-to-noise (S/N) specificationsa S/N checkout is performed only if there is no compatible autosampler (which is required for IDL checkout). Helium carrier gas, manual injection using a 30 m × 0.25 mm,0.25 µm column and in scan mode. Hydrogen carrier gas, manual injection using 20 m × 0.18 mm, 0.18 µm column and in scan mode. When the autosampler (ALS) is present, these specifications are a reference of the performance. Reference S/N specifications from the above table will not be confirmed at installation or introduction for ALS equipped systems.b Standard scanning from 50 to 300 u at nominal 272.0 u ion.c 1 μL injection of 100 pg/μL benzophenone (BZP) standard, 80 to 230 u scan at nominal 183 u ion, using methane reagent gas.d 2 μL injection of 100 fg/μL OFN standard scanning from 50 to 300 u at nominal 272 u ion, using methane reagent gas.2a Only applicable with optional Accurate Mass software package. Scan mode only. Not verified during installation.b As scan rate increases, sensitivity will decrease, and resolution may degrade.c A high flow rate into a fixed ion source will cause a loss in sensitivity.d The heated quadrupole mass filter should not require maintenance, but if maintenance is required, it should be performed by an Agilent service engineer.34aInlet temperature should be cool enough to touch when performing maintenance.bA micro ion gauge is shipped standard for the CI system, and is available optionally for EI systems.DE67854286This information is subject to change without notice.© Agilent Technologies, Inc. 2022Printed in the USA, May 26, 20225994-4846EN。
中国_74071010_铬锆铜制精炼铜条、杆、型材及异型材(2003-2013)进口量及进口额
—— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— ——
—— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— ——
服务价值： 掌握全部真实采购商以及采购商的详细交易信息 了解采购商的采购周期、采购频率、采购量价以及供应商构成 主动把控买家采购行为，准确评估买家贸易资信 有效维护老客户忠诚度，及时挽回已流失客户 掌握全球竞争对手的详细出口信息 了解竞争对手的最新贸易动态、出口状况以及其采购商分布 全面监测竞争对手贸易动向，及时调整企业发展战略 有效避免市场恶意竞争，提升企业市场竞争力
—— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— ——
—— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— ——
2007年03月 2007年04月 2007年05月 2007年06月 2007年07月 2007年08月 2007年09月 2007年10月 2007年11月 2007年12月 2008年01月 2008年02月 2008年03月 2008年04月 2008年05月 2008年06月 2008年07月 2008年08月 2008年09月 2008年10月 2008年11月 2008年12月 2009年01月 2009年02月 2009年03月 2009年04月
—— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— —— 64247.00 美元 3977.00 美元 129890.00 美元 33144.00 美元 111967.00 美元 ——
2011年报关员考试商品归类代码说明（2）
改良种⽤的⼭⽺ 01042010 90 001 野⼭⽺除外⾮改良种⽤野⼭⽺ 01042090 10 001 -⾮改良种⽤⼭⽺ 01042090 90 001 野⼭⽺除外⼩⼭⽺ 01042090 90 002 ⾮野⽣，⾮改良种⽤不超过185g的改良种⽤鸡 01051110 - 001 -种鸡 01051110 - 002 重量185g不超过185g的改良种⽤⽕鸡 01051210 - 001 -不超过185g的其他改良种⽤家禽 01051910 - 001 -种鸭 01051910 - 002 重量185g185克185g超过185g的⾮改良种⽤鹅 01059992 - 001 -鹅 01059992 - 002 改良种⽤除外，重量>185g珍珠鸡 01059993 - 001 改良种⽤除外，重量>185g⽕鸡 01059994 - 001 改良种⽤除外，重量>185g狐 01061990 10 001 野⽣的狐 01061990 90 001 活的，⾮野⽣的鳄鱼苗 01062011 - 001 -灰⿏蛇 01062020 10 001 ⾷⽤野⽣，活的，包括家养野⽣活波加丹蛇 01062020 10 002 ⾷⽤野⽣，包括家养野⽣活⽔蛇 01062020 10 003 ⾷⽤野⽣，包括家养野⽣⾷⽤野⽣活蛇 01062020 10 004 包括家养野⽣的草龟 01062020 20 001 ⾷⽤野⽣，活的，包括家养野⽣⼤⽔鱼 01062020 20 002 ⾷⽤野⽣，活的，包括家养野⽣龟 01062020 20 003 ⾷⽤野⽣，活的，包括家养野⽣龟苗 01062020 20 004 ⾷⽤野⽣，活的，包括家养野⽣龟鱼 01062020 20 005 ⾷⽤野⽣，活的，包括家养野⽣活草龟 01062020 20 006 ⾷⽤野⽣，包括家养野⽣活龟 01062020 20 007 ⾷⽤野⽣，包括家养野⽣活龟鱼 01062020 20 008 ⾷⽤野⽣，包括家养野⽣活甲鱼 01062020 20 009 ⾷⽤野⽣，包括家养野⽣活甲鱼苗 01062020 20 010 ⾷⽤野⽣，包括家养野⽣活⽔鱼 01062020 20 011 ⾷⽤野⽣，包括家养野⽣甲鱼苗 01062020 20 012 ⾷⽤野⽣，包括家养野⽣⽔鱼 01062020 20 013 ⾷⽤野⽣，活的，包括家养野⽣⽔鱼苗 01062020 20 014 ⾷⽤野⽣，包括家养野⽣灰⿏蛇 01062020 90 001 ⾷⽤⾮野⽣，活的活波加丹蛇 01062020 90 002 ⾷⽤⾮野⽣活⽔蛇 01062020 90 003 ⾷⽤⾮野⽣甲鱼苗 01062090 - 001 ⾮⾷⽤，⾮野⽣⾷⽤活乳鸽 01063921 - 001 -鸵鸟 01063922 - 001 ⾷⽤，活的野鸭 01063923 - 001 ⾷⽤，活的⾷⽤野⽣禽类 01063929 10 001 含家养野⽣，乳鸽鸵鸟野鸭除外鸽⼦ 01063990 90 001 活的，⾮⾷⽤，⾮野⽣。
商品归类代码说明（第七十一章）
商品名称编码附加编码附加序号说明未分级的天然珍珠 71011019 - 001 -已分级天然珍珠 71011099 - 001 -珍珠 71011099 - 002 未分级除外,天然的淡⽔珍珠 71012110 - 001 养殖的,未加⼯,未分级未分级,未加⼯的养殖珍珠 71012110 - 002 -已分级未加⼯养殖珍珠 71012190 - 001 -珍珠 71012190 - 002 养殖的,未加⼯,已分级淡⽔珍珠 71012210 - 001 养殖的,已加⼯,未分级⼈⼯珍珠 71012210 - 002 养殖的,已加⼯,未分级未分级,已加⼯的养殖珍珠 71012210 - 003 -养殖珍珠 71012210 - 004 已加⼯,未分级珍珠 71012210 - 005 养殖的,已加⼯,未分级淡⽔珍珠 71012290 - 001 养殖的,已加⼯,已分级⼈造珍珠 71012290 - 002 养殖的,已加⼯,已分级已分级已加⼯养殖珍珠 71012290 - 003 -珍珠 71012290 - 004 养殖的,已加⼯,已分级钻⽯ 71021000 - 001 未分级,未镶嵌钻⽯⽑坯 71021000 - 002 未分级,未镶嵌钻⽯ 71022900 - 001 未加⼯或简单加⼯的除外,⼯业⽤⽑坯钻 71023100 - 001 未加⼯或简单加⼯,⾮⼯业⽤天然钻⽯坯 71023100 - 002 未加⼯或简单加⼯,⾮⼯业⽤原钻⽯坯 71023100 - 003 未加⼯或简单加⼯,⾮⼯业⽤钻坯 71023100 - 004 未加⼯或简单加⼯,⾮⼯业⽤钻⽯ 71023100 - 005 未加⼯或简单加⼯,⾮⼯业⽤钻⽯⽑坯 71023100 - 006 未加⼯或简单加⼯,⾮⼯业⽤钻⽯坯 71023100 - 007 未加⼯或简单加⼯,⾮⼯业⽤钻⽯ 71023900 - 001 未加⼯或简单加⼯除外,⾮⼯业⽤半宝⽯ 71031000 - 001 天然的,未加⼯或仅简单加⼯半宝⽯料 71031000 - 002 天然的,未加⼯或仅简单加⼯半宝⽯原料 71031000 - 003 天然的,未加⼯或仅简单加⼯宝⽯原料 71031000 - 004 天然的,未加⼯或仅简单加⼯玛瑙料 71031000 - 005 天然的,未加⼯或仅简单加⼯玛瑙原料 71031000 - 006 天然的,未加⼯或仅简单加⼯⽯料 71031000 - 007 天然半宝⽯料,未加⼯或简单加⼯什宝⽯料 71031000 - 008 天然的,未加⼯或仅简单加⼯什⽯ 71031000 - 009 天然宝⽯,未加⼯或仅简单加⼯什⽯料 71031000 - 010 天然宝⽯,未加⼯或仅简单加⼯什⽟⽯料 71031000 - 011 天然的,未加⼯或仅简单加⼯饰⽯(半宝⽯) 71031000 - 012 天然的,未加⼯或仅简单加⼯未加⼯宝⽯或半宝⽯ 71031000 - 013 天然的有⾊什⽯ 71031000 - 014 天然宝⽯,未加⼯或仅简单加⼯⽟料 71031000 - 015 天然的,未加⼯或仅简单加⼯⽟器花件半成品 71031000 - 016 天然的⽟⽯ 71031000 - 017 天然的,未加⼯或仅简单加⼯⽟⽯半成品 71031000 - 018 天然的⽟⽯料 71031000 - 019 天然的,未加⼯或仅简单加⼯⽟⽯⽑料 71031000 - 020 天然的,未加⼯或仅简单加⼯⽟⽯胚料 71031000 - 021 天然的,未加⼯或仅简单加⼯⽟⽯坯 71031000 - 022 天然的,未加⼯或仅简单加⼯⽟⽯原料 71031000 - 023 天然的,未加⼯或仅简单加⼯⽟镯坯料 71031000 - 024 天然的,未加⼯或仅简单加⼯杂⽯料 71031000 - 025 天然宝⽯,未加⼯或仅简单加⼯红宝⽯ 71039100 - 001 天然,未加⼯或仅简单加⼯的除外蓝宝⽯ 71039100 - 002 天然,未加⼯或仅简单加⼯的除外绿宝⽯ 71039100 - 003 天然,未加⼯或仅简单加⼯的除外⽟⽯料 71039910 - 001 翡翠的,未加⼯或简单加⼯的除外翡翠 71039910 - 002 天然,未加⼯或仅简单加⼯的除外半宝⽯ 71039990 - 001 经加⼯的,红蓝绿宝⽯及翡翠除外半宝⽯半成品 71039990 - 002 经加⼯的,红蓝绿宝⽯及翡翠除外宝⽯ 71039990 - 003 经加⼯的,红蓝绿宝⽯及翡翠除外不定型宝⽯ 71039990 - 004 经加⼯的,红蓝绿宝⽯及翡翠除外晶⽯ 71039990 - 005 经加⼯的,红蓝绿宝⽯及翡翠除外什宝⽯ 71039990 - 006 经加⼯的,红蓝绿宝⽯及翡翠除外什⽯ 71039990 - 007 经加⼯的,红蓝绿宝⽯及翡翠除外什⽟⽯ 71039990 - 008 经加⼯的,红蓝绿宝⽯及翡翠除外⽔晶⽯ 71039990 - 009 经加⼯的,红蓝绿宝⽯及翡翠除外天然⽯(宝⽯) 71039990 - 010 经加⼯的,红蓝绿宝⽯及翡翠除外⽟器 71039990 - 011 经加⼯的,红蓝绿宝⽯及翡翠除外⽟⽯ 71039990 - 012 经加⼯的,红蓝绿宝⽯及翡翠除外⽟⽯制品 71039990 - 013 经加⼯的,红蓝绿宝⽯及翡翠除外杂⽟⽯ 71039990 - 014 经加⼯的,红蓝绿宝⽯及翡翠除外晶⽚ 71041000 - 001 压电⽯英⽯英 71041000 - 002 压电⽔晶⽚ 71041000 - 003 压电⽯英合成钻⽯ 71042010 - 001 合成或再造,未加⼯或仅简单加⼯宝⽯原料 71042090 - 001 合成,未加⼯,钻⽯除外⼈造半宝⽯ 71042090 - 002 未加⼯或仅简单加⼯,钻⽯除外⼈造宝⽯ 71042090 - 003 未加⼯或仅简单加⼯,钻⽯除外⼈造宝⽯料 71042090 - 004 未加⼯或仅简单加⼯,钻⽯除外⼈造宝⽯原料 71042090 - 005 未加⼯或仅简单加⼯,钻⽯除外⼈造钻⽯ 71049011 - 001 经加⼯的宝⽯半宝⽯,⼯业⽤半宝⽯ 71049099 - 001 经加⼯,⼯业⽤除外,钻⽯除外⼈造宝⽯ 71049099 - 002 经加⼯,⼯业⽤除外,钻⽯除外⼈造⽯ 71049099 - 003 经加⼯的,⼯业⽤除外,钻⽯除外杂⽯ 71049099 - 004 经加⼯的,⼯业⽤除外,钻⽯除外⼈造⾦刚⽯单晶 71051000 - 001 合成的钻⽯粉末⼈造⾦刚⽯粉 71051000 - 002 -钻⽯粉 71051000 - 003 天然或⼈造导电粉末(银粉) 71061000 - 001 -银粉 71061000 - 002 -纯银 71069110 - 001 未锻造，⼤于等于99.99%99%⽩银 71069190 - 001 未锻造纯银 71069210 - 001 半制成，纯度达于等于99.99%银板 71069210 - 002 半制成，纯度⼩于99.99%银丝 71069210 - 003 半制成，纯度⼩于99.99%银板 71069290 - 001 未锻造，纯度⼩于99.99%银粒 71069290 - 002 未锻造，纯度⼩于99.99%银条 71069290 - 003 半制成，纯度⼩于99.99%银线 71069290 - 004 半制成，纯度⼩于99.99%包银铜线 71070000 - 001 -银⽚ 71070000 - 002 以贱⾦属为底的包银材料⾦粉 71081100 - 001 ⾮货币⽤24K黄⾦块 71081200 - 001 未锻造,⾮货币⽤24K⾦ 71081200 - 002 未锻造,⾮货币⽤,⾦粉除外24K⾦粗坯 71081200 - 003 未锻造,⾮货币⽤24K⾦块 71081200 - 004 未锻造,⾮货币⽤24K⾦料 71081200 - 005 未锻造,⾮货币⽤,⾦粉除外纯黄⾦块 71081200 - 006 未锻造,⾮货币⽤纯黄⾦料 71081200 - 007 未锻造,⾮货币⽤,⾦粉除外黄⾦ 71081200 - 008 未锻造,⾮货币⽤,⾦粉除外黄⾦条 71081200 - 009 未锻造,⾮货币⽤⾦块 71081200 - 010 未锻造,⾮货币⽤⾦粒 71081200 - 011 未锻造,⾮货币⽤,⾦粉除外未锻造的⾦ 71081200 - 012 ⾮货币⽤,⾦粉除外⾜黄⾦ 71081200 - 013 未锻造,⾮货币⽤,⾦粉除外⾜⾦ 71081200 - 014 未锻造,⾮货币⽤,⾦粉除外⾜⾦九九⾦ 71081200 - 015 未锻造,⾮货币⽤,⾦粉除外14K黄⾦ 71081300 - 001 ⾮货币⽤,半制成14K⾦半成品 71081300 - 002 ⾮货币⽤,半制成14K⾦粒 71081300 - 003 ⾮货币⽤,半制成14K⾦料 71081300 - 004 ⾮货币⽤,半制成14K⾦饰料 71081300 - 005 ⾮货币⽤,半制成18K黄⾦ 71081300 - 006 ⾮货币⽤,半制成18K⾦半成品 71081300 - 007 ⾮货币⽤18K⾦粒 71081300 - 008 ⾮货币⽤,半制成22K黄⾦块 71081300 - 009 ⾮货币⽤,半制成24K⾦ 71081300 - 010 ⾮货币⽤,半制成24K⾦半成品 71081300 - 011 ⾮货币⽤,半制成24K⾦块 71081300 - 012 ⾮货币⽤,半制成24K⾦料 71081300 - 013 ⾮货币⽤,半制成99%黄⾦ 71081300 - 014 ⾮货币⽤,半制成9K黄⾦ 71081300 - 015 ⾮货币⽤,半制成9K⾦粒 71081300 - 016 ⾮货币⽤,半制成。
Vickers Vane Pumps AX438765616836en-000101 4535VQ型
Revised 10–01–89Service and Parts ManualI–3173–SVane Type Double Pump4535VQ Series - 20 DesignVickers ®Vane PumpsAX438765616836en-0001012270679 COVER‘‘O’’ RING OUTLET SUPPORT PLATESEAL PACK (4 REQ ’D)FLEX-SIDE –PLATE KITROTORVANE KIT (10 VANES &10 INSERTS)RINGINLET SUPPORT PLATE THESE PARTS ARE INCLUDED IN CARTRIDGE KITBACK-UPRINGSEAL RING ‘‘O’’ RINGCART .KITF3CART .KIT416435421234416436421233416437419511421954419510421955419509PIN (2REQ ’D)SCREW (2REQ ’D)MODEL4535VQ42A 4535VQ47A4535VQ50A 4535VQ57A 4535VQ60A380109422208430807S/A 433768S/A923954283871922701295710297718297502306772297503425510154107419675154087588509INSTALL SEAL RING IN BODY OR COVER, THEN INSTALL CARTRIDGE KIT.NOTE : FLEX SIDEPLATE KITS INCLUDE (4) F3 SEAL PACKS.SHAFT NO.TYPE SHAFT P/N SEC.SHAFT SEALKEY 11186114STR. KEYED SPLINE STR. KEYED HEAVY DUTY SPLINE289083289084361763413027429282217596239751ASSEMBLE SEAL WITH SPRING TOWARD BEARING.ASSEMBLE SEAL FLUSH TO PILOT FACE WITH SPRING FACING INWARD AS SHOWN.194878 WASHER394974PRIMARY SHAFT SEALSECONDARY SHAFT SEAL(SEE TABLE ) (USE ON ‘S ’ FLANGE MOUNTED MODELS ONLY .)TORQUE TO105 LB. IN. (12 N.m) 5 LB. IN. (0.5 N.m)NOTEBRONZE FACES MUST BE INSTALLED TOWARD THE ROTOR.942356 BODY S/AMOUNTING ASSEMBLY 4535VQ**A**F-***-20(*)INCLUDED IN FOOT BRACKET KIT NO.SCREW (2 REQ ’D)MOUNTING BRACKET FB-C-10205533205077SCREW (SEE TABLE)102949 RETAINING RING 158630 SPIROLOX RING 131812 BEARING4Model CodeRotation(Viewed from shaft end of pump)L – Left hand (CCW rotation)Omitted for right hand rotation 7611USgpm capacity (Cover end pump)21– 21 USgpm 25– 25 USgpm 30– 30 USgpm35– 35 USgpm 38– 38 USgpmSAE rating 1200 rpm –100 psi (7 bar)MountingF – Foot (Single shaft seal)S – Flange (Double shaft seal)Omitted for ange, single shaft seal assembly.CA – # 2 outlet – Opposite inletCB – # 2 outlet – 90 CCW from inlet CC – # 2 outlet – Inline with inlet CD – # 2 outlet – 90 CW from inlet With # 1 outlet 90 CW from inlet:DA – # 2 outlet – Opposite inletDB – # 2 outlet – 90 CCW from inlet DC – # 2 outlet – Inline with inlet DD – # 2 outlet – 90 CW from inletMounting282– SAE 2–bolt mounting 283– Foot mountingCover end cartridge R. H. Rotation Shaft end cartridge R. H. RotationStandard right hand shaft rotation cartridges shown. Reverse for left hand rotation; refer to note.Sharp Edges of Vane Must Lead in Direction of Rotation To reverse cartridge kit rotation,remove the two screws and reverse the location of the inlet support plate and the outlet support plate. Reinstall the two screws hand tight. Use pump cover to align all sections of the cartridge. Carefully remove the cover and tighten the screws.Sharp Edges of Vane Must Lead in Direction of Rotation10Design12For satisfactory service life of these components, use full ow ltration to provide uid which meets ISO cleanliness code 16/13or cleaner. Selections from pressure, return, and in-line lter series are recommended.NOTENOTEDanfoss Power Solutions is a global manufacturer and supplier of high-quality hydraulic and electric components. We specialize in providing state-of-the-art technology and solutions that excel in the harsh operating conditions of the mobile off-highway market as well as the marine sector. Building on our extensive applications expertise, we work closely with you to ensure exceptional performance for a broad range of applications. We help you and other customers around the world speed up system development, reduce costs and bring vehicles and vessels to market faster.Danfoss Power Solutions – your strongest partner in mobile hydraulics and mobile electrification.Go to for further product information.We offer you expert worldwide support for ensuring the best possible solutions foroutstanding performance. And with an extensive network of Global Service Partners, we also provide you with comprehensive global service for all of our components.Local address:DanfossPower Solutions GmbH & Co. OHG Krokamp 35D-24539 Neumünster, Germany Phone: +49 4321 871 0DanfossPower Solutions ApS Nordborgvej 81DK-6430 Nordborg, Denmark Phone: +45 7488 2222DanfossPower Solutions (US) Company 2800 East 13th Street Ames, IA 50010, USA Phone: +1 515 239 6000DanfossPower Solutions Trading (Shanghai) Co., Ltd.Building #22, No. 1000 Jin Hai Rd Jin Qiao, Pudong New District Shanghai, China 201206Phone: +86 21 2080 6201Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.Products we offer:•Cartridge valves •DCV directional control valves•Electric converters •Electric machines •Electric motors •Gear motors •Gear pumps •Hydraulic integrated circuits (HICs)•Hydrostatic motors •Hydrostatic pumps •Orbital motors •PLUS+1® controllers •PLUS+1® displays •PLUS+1® joysticks and pedals•PLUS+1® operator interfaces•PLUS+1® sensors •PLUS+1® software •PLUS+1® software services,support and training •Position controls and sensors•PVG proportional valves •Steering components and systems •TelematicsHydro-GearDaikin-Sauer-Danfoss。
报关员资格考试水平测试商品编码（3）
报关员资格考试水平测试商品编码（3）报关员资格考试水平测试商品编码13、烟胶片40012100归类说明：烟胶片即用燃烧椰子壳所发生的烟和热对压去水分的天然胶片进行熏烤后所得的胶片。
烟熏的目的是为了使胶片干燥并注入防氧化及防腐的甲酚物质。
烟胶片属于初级形状的天然橡胶，要归入第40章的品目4001，并按具体列名归入子目40012100。
14、内燃机用汽油泵(内燃机的输出功率为95马力)84133029归类说明：内燃机用汽油泵同于液体泵，不能按内燃机的零附件归类，而要按液体泵归入第84章的品目18413.并按用途(内燃机用)和内燃机的输出功率(95马力.小于180马力)归入子目84133029。
15、卫生纸巾自动包装机(用于纸巾定型、捆扎、包边、胶贴、封口和整理的设备。
)84224000归类说明：此卫生纸巾自动包装机的功能是对卫生纸巾定型、捆扎、包边、胶贴、封口和整理，从其功能上看它同于一种包装机，要归入第84章的品目8422，查看该品目下的子目，并按其他包装或打包的机器归入子目84224000。
16、双氧水28470000归类说明：双氧水的化学名称叫过氧化氢，无色的重液体，密度为1.438，在不同的情况下可有氧化作用或还原作用，可用作氧化剂、消毒剂、漂白剂等。
根据其成分，应作为无机化工品归入第28章，而它又不同于一般的氧化物，应归入第8分章的杂项无机产品，查阅该分章的品目条文，按具体列名归入子目28470000。
注：本题的双氧水，若是制成一定剂量或零售形状包装的要归入品目3004。
17、手动理发推剪82149000归类说明：手动理发推剪属于贱金属制造的手工工具，贱金属的手工工具一般要归入第82章，查阅本章品目条文，将其归入品目8214[其他利口器(如理发推剪、屠刀等)……]，查看该品目下的子目，未发现有列名，故按未具体列名的货品归入子目82149000。
18、碳钢制管子的十字接头73079900归类说明：碳钢制管子的十字接头同管子一样要按钢铁制品归入第73章，并按具体列名归入品目7307，因是用碳钢制造的，不属于铸铁制造的铸件，故只能归入子目730790内，再查看该子目下无此商品的具体列名，故最终按未具体列名的商品归入子目73079900.19、由表宽为6毫米的塑料扁条编结而成的塑料筐46029000归类说明：塑料及其制品通常应归入第39章，但查阅第46章注释一可知：用塑料扁条为材料编结而成的制品也应按编结材料制品归入本章。
HS93-99707中文资料
Pitch
Packaging (mm) Length Width 12.70 12.70 12.70 14.22 17.20 20.30 20.32 20.57 25.40 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 25.40 25.40 25.40 29.80 27.62 29.80 27.62 29.80 29.80 27.62 27.94 27.84 27.62 27.62 28.58 8.90 8.90 8.90 14.22 12.80 9.80 9.80 10.00 10.00 9.53 9.65 9.53 9.53 9.53 9.65 9.65 9.65 9.65 9.65 9.26 9.65 9.53 9.53 10.92 10.92 10.92 16.26 16.00 16.26 16.00 16.26 16.26 16.00 16.26 16.26 16.00 16.00 16.26
Hi-Pot (Vrms) 1500 1500 1500 3000 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500
Height 6.35 6.35 6.35 10.20 6.00 6.35 7.37 6.60 9.80 6.22 5.50 6.22 6.22 6.22 5.50 5.50 5.50 6.06 6.06 6.06 6.22 6.22 6.22 7.34 7.34 7.34 6.95 5.77 6.95 5.77 6.95 6.95 5.77 5.77 5.77 5.77 5.77 6.95
标准中文名称
标准中⽂名称,齿轮油泵尺度编号标准中⽂名称标准英⽂名称 JB/T7040-1993(2005复审) 液压叶⽚泵实验办法 - JB/T7039-1993 液压叶⽚泵技巧前提 - JB/T50001-1999 液压叶⽚泵产品品质分等6.3MPa定量叶⽚泵 - JB/T50002-1999 液压叶⽚泵产品质量分等16MPa定量叶⽚泵 - JB/T50000-1999 液压变量叶⽚泵产品德量分等 - DIN 51389-3-1998 润滑剂检验.叶⽚泵中液压液体的机械检修.第3局部:含⽔不易燃液压液体⽤B⽅式 (Determination of lubricants - Mechanical testing of hydraulic fluids in the vane-cell-pump - Part 3: Method B for aqueous not easily inflammable hydraulic fluids) DIN 51389-2-1982 润滑剂检验.叶⽚泵中液压液体的机械检验.不含⽔份的液压液体A法 (Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; method A foranhydrous hydraulic fluids) DIN 51389-1-1982光滑剂检验.叶⽚泵中液压液体的机械测验.个别⼯作原理 (Determination of lubricants; mechanical testing of hydraulic fluids in the vane-cell-pump; general working principles) JIS B8351-1999 液压叶⽚泵 (Vane pumps for hydraulic use)。
商品归类代码说明（第四十七章）
商品名称编码附加编码附加序号说明机械⽊浆 47010000 - 001 -化学⽊浆 47020000 - 001 -硫酸盐溶解浆 47020000 - 002 -本⾊⽊浆 47031100 - 001 针叶硫酸盐未漂⽩⽊浆硫酸盐未漂⽩针叶纸浆 47031100 - 002 -⽊浆 47031100 - 003 未漂⽩针叶硫酸盐⽊浆未漂⽩针叶⽊碱⽊浆或硫酸盐⽊浆 47031100 - 004 - 纸浆 47031100 - 005 未漂⽩硫酸盐针叶纸浆未漂⽩硫酸盐阔叶纸浆 47031900 - 001 -硫酸盐针叶漂⽩⽊浆 47032100 - 001 -⽊浆 47032100 - 002 漂⽩针叶硫酸盐⽊浆漂⽩硫酸盐针叶⽊浆 47032100 - 003 -漂⽩针叶⽊硫酸盐⽊浆 47032100 - 004 -硫酸盐阔叶漂⽩⽊浆 47032900 - 001 -硫酸盐阔叶漂⽩纸浆 47032900 - 002 -漂⽩⾮针叶硫酸盐⽊浆 47032900 - 003 -漂⽩宽叶硫酸盐⽊浆 47032900 - 004 -未漂⽩的针叶⽊亚硫酸盐⽊浆 47041100 - 001 -半漂⽩或漂⽩针叶⽊亚硫酸盐⽊浆 47042100 - 001 - 漂⽩针叶⽊亚硫酸⽊浆 47042100 - 002 -纤维浆板 47042100 - 003 -棉短绒纸浆 47061000 - 001 -绒⽑浆 47061000 - 002 棉短绒纸浆从回收纸提取的纤维浆 47062000 - 001 -废旧箱板纸 47071000 - 001 -废⽜⽪纸 47071000 - 002 -废纸 47071000 - 003 -废纸箱 47071000 - 004 -旧⽡楞箱纸 47071000 - 005 -⽜⽪纸边⾓料 47071000 - 006 -⽡楞纸板边⾓料 47071000 - 007 -⽡楞纸边⾓料 47071000 - 008 -废报纸 47073000 - 001 -废杂志 47073000 - 002 -旧报纸 47073000 - 003 -旧杂志 47073000 - 004 -废杂纸 47079000 - 001 未分选的。
《水和废水部分监测项目》的检出限及有效位数
《水质游离氯和总氯的测定N, N-二乙基-1, 4-苯二胺分光光度法》
HJ 586-2010
5cm比色皿0.004mg/L，1cm比色皿0.03mg/L
当测定结果小于0.01mg/L时，保留到小数点后三位。大于等于0.01mg/L且小于10mg/L时，保留到小数点后二位。大于等于10mg/L时保留三位有效数字。
水和废水部分监测项目的检出限及有效位数
序号
监测项目
分析方法
最低检出浓度（量）
有效数字最多位数
小数点后最多位数
备注
1
pH值
《水质pH值的测定玻璃电极法》GB/T 6920-1986
0.1（pH值）
2
2
《大气降水pH值的测定电极法》GB/T 13580.4-1992
0.1（pH值）
2
2
2
臭
水和废水监测分析方法》（第四版增补版）国家环保总局2002年第三篇综合指标和无机污染物第一章理化指标
《水质水温的测定》GB/T 13195-1991
0.1℃
3
1
7
浊度
《水质浊度的测定》GB/T 13200-1991
1度
3
1
仅做目视比浊法
8
总残渣
重量法《水和废水监测分析方法》（第四版增补版）国家环保总局2002年第三篇综合指标和无机污染物第一章理化指标
5mg/L
3
0
9
悬浮物
《水质悬浮物的测定重量法》GB/T 11901-1989
0.1（pH值）
2
2
12
碱度
酸碱指示剂滴定法《水和废水监测分析方法》（第四版增补版）国家环保总局2002年第三篇综合指标和无机污染物第一章理化指标
IQFISH Fast Hybridization Buffer 900ul, Part Numbe
IQFISH Fast Hybridization Buffer 900ul, Part Number G9414A *************(24小时)化学品安全技术说明书GHS product identifier 应急咨询电话（带值班时间）::供应商/ 制造商:安捷伦科技贸易（上海）有限公司中国（上海）外高桥自由贸易试验区英伦路412号（邮编:200131)电话号码： 800-820-3278传真号码: 0086 (21) 5048 2818IQFISH Fast Hybridization Buffer 900ul, Part Number G9414A化学品的推荐用途和限制用途G9414A部件号:物质用途:分析试剂。
900 ul IQFISH Fast Hybridization Buffer 900ul G9414-60000安全技术说明书根据 GB/ T 16483-2008 和 GB/ T 17519-2013GHS化学品标识:IQFISH 快速杂交缓冲液 900ul，部件号 G9414A 危险性类别信号词:警告危险性说明:H319 - 造成严重眼刺激。
H335 - 可能造成呼吸道刺激。
H373 - 长期或反复接触可能损害器官。
(肾):防范说明预防措施:事故响应:GHS标签要素混合物中由对水生环境毒性未知的组分组成的比率： 20%象形图物质或混合物的分类根据 GB13690-2009 和 GB30000-2013急性毒性 (口服) - 类别 5皮肤腐蚀/刺激 - 类别 2H319严重眼损伤/眼刺激 - 类别 2AH335特异性靶器官毒性 一次接触 (呼吸道刺激) - 类别 3H373特异性靶器官毒性 反复接触 - 类别 2紧急情况概述液体。
无资料。
无资料。
有关环境保护措施，请参阅第 12 节。
H319 - 造成严重眼刺激。
H335 - 可能造成呼吸道刺激。
H373 - 长期或反复接触可能损害器官。