富士通取款机BDU 错误代码

BDU 错误代码
用errview –-k查看ej,能看到如下错误信息：
Status Info
AAAA BBCC DDEE FFGG HHHH IIJJ KKLL MMNN OOPP QQRR SSTT UUVV WWXX YYZZ aabb ccdd Eeff gghh iijj kkll mmnn
下面是各字节的定义（后面的两个字母的代码对应其字节在Status Info 中的位置）
BYTE 1 IOC Error Code FF
BYTE 2 IOC error code Extension GG
BYTE 3 Error classification reg KK
7 parameter is abnormal 参数不正常
6 Media position is abnormal 媒介位置异常
5 no media at the persenbed position
4 internal conflict
3 hardware failure
2 counting is not complete
1 jam
0 unit not in ready state
BYTE4 Error detail register LL
7 Pool Section Failure
6 Main hardware failure
5 Sensor is abnormal or media remains 传感器异常或媒介残留
4 Shutter Failure(F300 FESA Only)
3 Number of counted bills does not balance
2 Reject box is overflowing
1 Reject box is not mounted
0 Cash cassette is not in ready state
BYTE5 Counting Error Detail Register MM
7 Bill is too long
6 Bill is too short
5 Skew error 倾斜
4 Bill thickness is abnormal (multiple feed) 厚度
3 Bill spacing too short
2 Bills are feed from wrong cassette
1 >decimal code for abnormal CC (cash cassette)
0 >(11)3=CC#1 (01)1=CC#3
(10)2=CC#2 (00)0=CC#4
BYTE6 SENSOR Output register 1 NN
7 CC#4 primary Lt.counter –PLS4
6 CC#4 primary Rt.counter –PRS4
5 CC#3 primary Lt.counter –PLS3
4 CC#3 primary Rt.counter –PRS3
3 CC#2 primary Lt.counter –PLS2
2 CC#2 primary Rt.counter –PRS2
1 CC#1 primary Lt.counter –PLS1
0 CC#1 primary Rt.counter –PRS1
BYTE7 Sensor Output Register 2 OO
7 -NOT USED-
6 –NOT USED-
5 Media exists at reject path sensor –RJS 废钞满传感器
4 Media exists at count path sensor -CPS
3 Media exists at Lt gate sensor -GSLS
2 Media exists at Rt gate sensor –GSRS
1 Media exists at Lt path sensor -BPLS
0 Media exists at Rt path sensor -BPRS
BYTE8 Sensor Output Register 3 PP
7 Meemory backup battery low
6 0: Front Service 1:Rear Service
5 0: Landmark mode 1:F3000 Mode (FESA)
4 0:Lawrence Shutter 1:Landmark Shutter
3 –Not Used-
2 Pool is at home position
1 Media at exit to be removed by customer
0 Media exists in pool section(at upper position)
BYTE9 Sensor Output Register 4 QQ
7 –Not Used-
6 –Not Used-
5 –Not Used-
4 0:Rej Shutter Open 1:Rej Shutter Closed
3 0:4th Cass.out 1:4th Cass.in
2 0:3th Cass.out 1:3th Cass.in
1 0:2th Cass.out 1:2th Cass.in
0 0:1th Cass.out 1:1th Cass in
BYTE10 Sensor Output Register 5 RR
7 -Not Used-
6 -Not Used-
5 -Not Used-
4 -Not Used-
3 -Not Used-
2 B.D.is not in the ATM Cabinet
1 B.D Shutter Open(FESA)
0 B.D.Shutter Closed(FESA)
BYTE11 Status Blt Register 1 SS
7 Bill Delivery completed
6 –Not used-
5 –Not Used-
4 0:ROM program only 1:Download code exists
3 –Not Used-
2 POS sensor Bills in pool section
1 Bill rejected by initialization or count command
0 Bill retracted by initialization command BYTE12 -15-Cassatta Register TT UU VV WW
7 Bill near end sensor –C#LL
6 Not Used –
5 cassette not set / denom=000
4 cassette not in place
3 Not Used-
2 >000:None 100:$10 110:$100
1 >001:$1 011:$20 111:Coupon
0 >010 $5 101:$50
BYTE16 –POM Register XX
D7-EF=NO BILL (Thickness Parameter=0.12mm) A6-BD=ONE BILL
72-89=TWO BILLS。