行业标准规范英汉对照-通用零部件19

行业标准规范英汉对照-通用零部件19
951 GB/T 15188.3-1994 阀门的结构长度内螺纹连接阀门Face-to-face, centre-to-face, end-to-end and centre-to-end dimensions of valves——Female screw valves
952 GB/T 15188.4-1994 阀门的结构长度外螺纹连接阀门Face-to-face, centre-to-face, end-to-end and centre-to end dimensions of valves——Mals screw valves
953 GB 15382-1994 气瓶阀通用技术条件 General technique specifications for cylinder valves
954 GB 15383-1994 气瓶阀出气口连接型式和尺寸 Outlet connections and sizes for cylinder valves
955 GB/T 15389-1994 螺杆 Threaded rods
956 GB/T 15390-1994 工程用钢制焊接弯板链和链轮 Welded steel type cranked link mill chains and chain wheels
957 GB/T 15530.1-1995 铜合金整体铸造法兰 Cast copper alloy integral flanges 958 GB/T 15530.2-1995 铜合金对焊法兰 Copper alloy welding neck flanges
959 GB/T 15530.3-1995 铜合金板式平焊法兰 Copper alloy plate flanges for brazing or welding
960 GB/T 15530.4-1995 铜合金带颈平焊法兰 Copper alloy hubbed slip-on flanges for brazing or welding
961 GB/T 15530.5-1995 铜合金平焊环松套板式钢法兰 Loose plate steel flanges with copper alloy plate collar for brazing or welding
962 GB/T 15530.6-1995 铜合金对焊环松套板式钢法兰 Loose plate steel flanges with copper alloy welding neck collar
963 GB/T 15530.7-1995 铜合金法兰盖 Copper alloy blank flanges
964 GB/T 15530.8-1995 铜合金及复合法兰技术条件 Specifications for copper alloy and composite flanges
965 GB/T 15531-1995 带传动带轮中心距调整极限值 Belt drives——Pulleys ——Limiting values for adjustment of centres
966 GB/T 15601-1995 管法兰用金属包覆垫片 Metallic envelope gaskets for pipe flanges
967 GB/T 15700-1995 聚四氟乙烯波纹补偿器通用技术条件General specification for polytetrafluoroethylene bellows compensators
968 GB/T 15752-1995 圆弧圆柱齿轮基本术语 Terminology of circular-arc gear
969 GB/T 15753-1995 圆弧圆柱齿轮精度 Accuracy of cylindrical gear with circular-arc tooth profile
970 GB/T 15758-1995 花键基本术语 Basic terminology of spline
971 GB/T 15828-1995 V带和多楔带传动节线位置的动态测定 V-and ribbed belt ——Dynamic test to determine Pitch zone location
972 GB/T 15855.1-1995 扁圆头击芯铆钉 Flat round head drive rivets
973 GB/T 15855.2-1995 沉头击芯铆钉 Countersunk head drive rivets
974 GB/T 15855.3-1995 击芯铆钉技术条件 Specifications for drive rivets
975 GB/T 15856.1-1995 十字槽盘头自钻自攻螺钉 Cross recessed pan head self-drilling tapping screws
976 GB/T 15856.2-1995 十字槽沉头自钻自攻螺钉 Cross recessed countersunk head self-drilling tapping screws
977 GB/T 15856.3-1995 十字槽半沉头自钻自攻螺钉 Cross recessed raised countersunk head self-drilling tapping screws
978 GB/T 15856.4-1995 六角法兰面自钻自攻螺钉Hexagon flange head self-drilling tapping screws
979 GB/T 16442-1996 平面二次包络环面蜗杆传动术语 Planar double-enveloping worm gearing terminology
980 GB/T 16443-1996 平面二次包络环面蜗杆传动几何要素代号 Planar double——enveloping worm gearing geometrical data symbols
981 GB/T 16444-1996 平面二次包络环面蜗杆减速器系列、润滑和承载能力 Planar double-enveloping worm gearsreducer-dimensions and load capacitys
982 GB/T 16445-1996 平面二次包络环面蜗杆传动精度 Planar double-enveloping
worm gearing accuracy
983 GB/T 16446-1996 平面二次包络环面蜗杆减速器技术条件Planar double-enveloping worm gearing reducer technical specification
984 GB/T 16643-1996 滚动轴承滚针和推力圆柱滚子组合轴承外形尺寸 Rolling bearings——Combined needle roller thrust roller bearings——Boundary dimensions 985 GB/T 16674-1996 六角法兰面螺栓小系列 Hexagon flange bolts——Small series
986 GB/T 16748-1997 滑动轴承金属轴承材料的压缩试验 Plain bearings——Compression testing of metallic bearing materials
987 GB/T 3481-1997 齿轮轮齿磨损和损伤术语 Cears——Wear and damage to gear teeth——Terminology
988 GB/T 16823.1-1997 螺纹紧固件应力截面积和承载面积 Stress area and bearing area for threaded fasteners
989 GB/T 16823.2-1997 螺纹紧固件紧固通则 General rules of tightening for threaded fasteners
990 GB/T 16823.3-1997 螺纹紧固件拧紧试验方法 Method of tightening test for threaded fasteners
991 GB/T 16824.1-1997 六角凸缘自攻螺钉 Hexagon head tapping screws with collar
992 GB/T 16824.2-1997 六角法兰面自攻螺钉 Hexagon flange head tapping screws 993 GB/T 16848-1997 直廓环面蜗杆、蜗轮精度 Accuracy of double enveloping worm gearing with straight line generatrix
994 GB/T 5858-1997 重载传动用弯板滚子链和链轮 Heavy-duty cranked-link transmission roller chains and chain wheels
995 GB/T 1243-1997 短节距传动用精密滚子链和链轮 Short pitch transmission precision roller chains and chain wheels
996 GB/T 3931-1997 联轴器术语 Coupling——Vocabulary
997 GB/T 1568-1997 键技术条件 Technical specifications for keys
998 GB/T 271-1997 滚动轴承分类 Rolling bearings——Classification
999 GB/T 16922-1997 薄型楔键及其键槽Thin taper reys and their
corresponding keyways
1000 GB/T 16940-1997 直线运动支承直线运动球轴承外形尺寸和公差 Linear motion bearings——Linear motion ball bearings——Boundary dimensions and tolerances
~
1001 GB/T 16938-1997 紧固件螺栓、螺钉、螺柱和螺母通用技术条件 Fasteners ——General requirements for blots,screws,studs and nuts
1002 GB/T 16939-1997 钢网架螺栓球节点用高强度螺栓 High strength bolts for joints of space grid structures
1003 GB/T 5279.2-1997 沉头螺钉第2部分: 十字槽插入深度 Countersunk flat head screws——Part 2: Penetration depth of cross recesses
1004 GB/T 819.2-1997 十字槽沉头螺钉第2部分: 钢8.8、不锈钢A2-70和有色金属CU2或CU3 Cross recessed countersunk flat head screws(common head style)——Grade A——Part 2: Steel of property class 8.8,stainless and non-ferrous metals 1005 GB/T 96-1985 大垫圈-A和C级 Plain washers——Large series——Product grades A and C
1006 GB/T 97.1-1985 平垫圈-A级 Plain washers——Normal series——Product grade A
1007 GB/T 97.2-1985 平垫圈倒角型-A级 Plain washers——Chamfered——Normal series——Product grade A
1008 GB/T 98-1988 止动垫圈技术条件 Specification for tab washer
1009 GB/T 99-1986 开槽圆头木螺钉 Slotted round head wood screws
1010 GB/T 100-1986 开槽沉头木螺钉 Slotted countersink head wood screws
1011 GB/T 101-1986 开槽半沉头木螺钉 Slotted raised countersunk head wood screws
1012 GB/T 102-1986 六角头木螺钉 Hexagon head wood screws
1013 GB/T 109-1986 平头铆钉 Flat head rivets
1014 GB/T 116-1986 铆钉技术条件 Specifications for rivet
1015 GB/T 117-1986 圆锥销 Taper pins
1016 GB/T 118-1986 内螺纹圆锥销 Taper pins with internal thread
1017 GB/T 119-1986 圆柱销 Parallel pins
1018 GB/T 120-1986 内螺纹圆柱销 Parallel pins with internal thread
1019 GB/T 121-1986 销技术条件 Specifications for pins
1020 GB/T 152.1-1988 紧固件铆钉用通孔 Fasteners——Clearance holes for rivets
1021 GB/T 152.2-1988 紧固件沉头用沉孔 Fasteners——Countersinks for countersunk head serews
1022 GB/T 152.3-1988 紧固件圆柱头用沉孔 Fasteners——Counterbores for hexagon socket head serewsand slotted cheese head screws
1023 GB/T 152.4-1988 紧固件六角头螺栓和六角螺母用沉孔 Fasteners——Counterbores for hexagon bolts and nuts
1024 GB/T 17116.1-1997 管道支吊架第1部分; 技术规范 Pipe supports and hangers Part 1: Technical specification 1025 GB/T 17116.2-1997 管道支吊架第2部分: 管道连接部件 Pipe supports and hangers Part 2: Pipe attachments 1026 GB/T 17116.3-1997 管道支吊架第3部分: 中间连接件和建筑结构连接件 Pipe supports and hangers Part 3: Middle connection attachments and building structure attachments 1027 GB/T 3852-1997 联轴器轴孔和联结型式与尺寸 Types and dimension for coupling bores and their connection
1028 GB/T 17185-1997 钢制法兰管件 Steel pipe fittings for flanged joint
1029 GB/T 17186-1997 钢制管法兰连接强度计算方法 Calculating method for strength of steel pipe flanged joint
1030 GB/T 17197-1997 带传动联组普通V带轮(有效宽度制) Belt drives——Grooved pulleys for joined classical V-belts (effective system)
1031 GB/T 11356.1-1997 带传动普通及窄V带传动用带轮(基准宽度制) 槽形检验Belt drives——Pulleys for classical and narrow V-belts drives(system based on datum width)——Geometrical inspection of grooves
1032 GB/T 11356.2-1997 带传动普通及窄V带传动用带轮(有效宽度制) 槽形检验Belt drives——Pulleys for classical and narrow V-belts drives(system based effective width)——Geometrical inspection of grooves
1033 GB/T 3480-1997 渐开线圆柱齿轮承载能力计算方法 Calculation methods of
load capacity for involute cylindrical gears
1034 GB/T 17241.1-1998 铸铁管法兰类型 Synotic table for cast iron pipe flanges
1035 GB/T 17241.2-1998 铸铁管法兰盖 Cast iron pipe blank flanges
1036 GB/T 17241.3-1998 带颈螺纹铸铁管法兰 Hubbed threaded cast iron pipe flanges
1037 GB/T 17241.4-1998 带颈平焊和带颈承插焊铸铁管法兰Hubbed slip-on-welding and hubbed socket welding cast iron pipe flanges
1038 GB/T 17241.5-1998 管端翻边带颈松套铸铁管法兰 Loose hubbed cast iron pipe flanges for lapped pipe end
1039 GB/T 17241.6-1998 整体铸铁管法兰 Integral cast iron pipe flanges
1040 GB/T 17241.7-1998 铸铁管法兰技术条件 Specifications for cast iron pipe flanges
1041 GB/T 8464-1998 水暖用内螺纹连接阀门 Valves with female screw ends for water-heating system
1042 GB/T 273.2-1998 滚动轴承推力轴承外形尺寸总方案 Rolling bearings——Thrust bearings——Boundary dimensions,general plan
1043 GB/T 7813-1998 滚动轴承附件轴承座外形尺寸Rolling bearings accessories——Plummer block housings——Boundary dimensions
1044 GB/T 290-1998 滚动轴承冲压外圈滚针轴承外形尺寸 Rolling bearings——Needle roller bearings, drawn cup without inner rings——Boundary dimensions 1045 GB/T 305-1998 滚动轴承外圈上的止动槽和止动环尺寸和公差 Rolling bearings——Snap ring groove and snap ring on outer ring——Dimensions and tolerances 1046 GB/T 801-1998 小半圆头低方颈螺栓 B级 Cup head square neck bolts with small head and short neck——Product grade B
1047 GB/T 14-1998 大半圆头方颈螺栓 C级 Cup head square neck bolts with large head——Product grade C。