RCWE0603R330FKEA;RCWE1210R240FKEA;RCWE0603R200FKEA;RCWE0603R240FKEA;中文规格书,Datasheet资料
AVX电容器型号集合
04023J1R0BBSTR 04023J1R2BBSTR 04023J1R3PBWTR 04023J1R5BBSTR 04023J1R6PBWTR 04023J1R8ABSTR/500 04023J1R8BBSTR 04023J2R0PBSTR 04023J2R8BBSTR 04023J3R0BBWTR 04023J3R9ABSTR 04023J4R1BBSTR 04025A180KAT2A 04025A2R7BAT2A 04025A2R7JAT2A 04025A3R3DAT2A 04025A3R9CAT2A 04025A4R0CAT2A 04025A4R7CAT2A 04025A7R0DAT2A 04025C102MAT2A 04025C301KAT2A 04025C681KAT2A 04025D102KAT2A 04025U130FAT2A 04025U160FAT2A 04025U1R0BAT2A 04025U1R8BAT2A 04025U2R2BAT4A 04026C101KAT2A 04026C103MAT2A 0402YA100DAT2A 0402YA100KAT2A 0402YA150GAT2A 0402YA180JAT2A 0402YC221MAT2A 0402YC332KAT2A 0402YC471JAT2A 0402YC471MAT2A 0402YC562JAT2A 0402YC821KAT2A 0402YD105KAT2A 0402YJ100GBSTR 0402ZA220JAT2A 0402ZC330KAT2A 0402ZC333MAT2A 0402ZC472KAT2A
型号
制造商
创唯电子型号齐全，经营进口电子元器件产品众多，量大优惠，梯度报价 02013J0R2PBSTR 02013J1R8BBSTR 02013J2R4BBSTR 02013J2R4BBWTR 0201YC101MAT2A 0201YC102JAT2A 0201ZC102MAT2A 0201ZC682KAT2A 0306ZC103KAT2A 04 5036 006 201 862+ 04 5036 008 210 862+ 04023A100CAT2A 04023A100DAT2A 04023A100FAT2A 04023A121GAT2A 04023A180GAT2A 04023A221JAT4A 04023A2R2CAT2A 04023A2R7CAT2A 04023A3R3CAT2A 04023A3R3DAT2A 04023A560KAT2A 04023A5R6DAT2A 04023A680JAT2A 04023C101JAT2A 04023C103JAT2A 04023C121KAT2A 04023C122JAT2A 04023C561JAT2A 04023C682KAT2A 04023C821KAT2A 04023D223KAT2A 04023J0R1ABSTR 04023J0R2ABSTR 04023J0R2BBSTR 04023J0R3ABSTR 04023J0R4ABSTR 04023J0R4PBWTR 04023J0R5PBSTR 04023J0R6PBSTR 04023J0R7ABSTR 04023J0R7BBSTR 04023J0R8ABSTR 04023J100FBSTR AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX AVX
ad中0603的封装电容 -回复
ad中0603的封装电容-回复问题：什么是AD中0603封装电容？回答：AD中0603封装电容是一种表面贴装电容器，常用于电子设备中的电路板上。
它的封装尺寸为0603，这意味着其长度为0.06英寸（1.6毫米），宽度为0.03英寸（0.8毫米）。
尽管在市场上有各种尺寸的电容器可供选择，但0603封装电容因其适中的尺寸和广泛的应用而变得非常受欢迎。
封装电容器有着许多不同的尺寸，每种尺寸都有不同的规格和用途。
0603封装电容是目前最常见的尺寸之一，其小巧的尺寸使其非常适合于电子设备中的紧凑空间。
它可以在各种电子设备中找到，包括手机、平板电脑、电脑、电视和音频设备等。
AD中0603封装电容的封装材料通常是陶瓷，这种材料具有高电介质常数和低电阻，并且可以在各种环境条件下稳定运行。
陶瓷材料的特点使得这种类型的封装电容器适用于广泛的应用，特别是在需要高频响应和稳定性的电路中。
封装电容器的主要作用是在电路中储存和释放电荷，以帮助稳定电压和过滤电源中的噪声。
它们通常用于平滑电源中的电压波动，以确保其他电子元件在电路中能够稳定工作。
封装电容器还可以用于滤波器电路中，以降低高频噪声的干扰。
AD中0603封装电容的选择通常基于电容值和电压额定值。
电容值指的是电容器可以存储的电荷量，通常用法拉（F）或微法（μF）表示。
电压额定值表示电容器所能承受的最大电压。
在选择电容器时，设计人员需要根据电路要求和应用需求来确定适当的电容值和电压额定值。
此外，封装电容器的公差也是选型的一个重要考虑因素。
公差表示电容器的实际值可能与标称值有所不同。
尽管封装电容器的公差通常在10到20之间，但对于某些高精度应用，可能需要更低的公差。
因此，在选择0603封装电容时，需要查看其公差值以确保其符合设计要求。
最后，在应用0603封装电容时，还需要考虑焊接和布局。
由于AD中0603封装电容的尺寸较小，因此在焊接时需要特别小心。
特别注意正确的焊接温度和时间，以防止因过高温度和焊接时间过长而导致电容器损坏。
Motorola 3.5 kHz 产品说明书
RVN4126 3.59100-386-9100-386/T DEVICERVN41772-CD2-3.5MCS/MTSRVN41821-CD2-3.5XTS3000/SABER PORTABLE YES RKN4046KHVN9085 3.51-20 R NO HLN9359 PROG. STAND RVN4057 3.532 X 8 CODEPLUG NO3080385B23 & 5880385B30 MDVN4965 3.59100-WS/T CONFIG KITRVN4053 3.5ASTRO DIGITAL INTERFACE NO3080385B23RVN41842-CD RKN4046A (Portable) 2-3.5ASTRO PORTABLE /MOBILE YES3080369B73 or0180300B10 (Mobile) RVN41831-CD3080369B732-3.5ASTRO SPECTRA MOBILE YES(Low / Mid Power)0180300B10 (High Power) RVN4185CD ASTRO SPECTRA PLUS MOBILE NO MANY OPTIONS; SEESERVICE BRIEF#SB-MO-0101RVN4186CD ASTRO SPECTRA PLUS MANY OPTIONS;MOBILE/PORTABLE COMB SEE SERVICE BRIEF#SB-MO-0101RVN4154 3.5ASTROTAC 3000 COMPAR.3080385B23RVN5003 3.5ASTROTAC COMPARATORS NO3080399E31 Adpt.5880385B34RVN4083 3.5BSC II NO FKN5836ARVN4171 3.5C200RVN4029 3.5CENTRACOM SERIES II NO VARIOUS-SEE MANUAL6881121E49RVN4112 3.5COMMAND PLUS NORVN4149 3.5COMTEGRA YES3082056X02HVN6053CD CT250, 450, 450LS YES AAPMKN4004RVN4079 3.5DESKTRAC CONVENTIONAL YES3080070N01RVN4093 3.5DESKTRAC TRUNKED YES3080070N01RVN4091 3.5DGT 9000 DESKSET YES0180358A22RVN4114 3.5GLOBAL POSITIONING SYS.NO RKN4021AHVN8177 3.5GM/GR300/GR500/GR400M10/M120/130YES3080070N01RVN4159 3.5GP60 SERIES YES PMLN4074AHVN9128 3.5GP300 & GP350RVN4152 3.5GP350 AVSRVN4150 3.5GTX YES HKN9857 (Portable)3080070N01(Mobile) HVN9025CD HT CDM/MTX/EX SERIES YES AARKN4083/AARKN4081RiblessAARKN4075RIBLESS NON-USA RKN4074RVN4098H 3.5HT1000/JT1000-VISAR YES3080371E46(VISAR CONV)RVN4151 3.5HT1000 AVSRVN4098 3.5HT1000/ VISAR CONV’L.YES RKN4035B (HT1000) HVN9084 3.5i750YES HLN-9102ARVN4156 3.5LCS/LTS 2000YES HKN9857(Portable)3080070N01(Mobile) RVN4087 3.5LORAN C LOC. RECV’R.NO RKN4021ARVN4135 3.5M100/M200,M110,M400,R100 includesHVN9173,9177,9646,9774YES3080070N01RVN4023 3.5MARATRAC YES3080070N01RVN4019 3.5MAXTRAC CONVENTIONAL YES3080070N01RVN4139 3.5MAXTRAC LS YES3080070N01RVN4043 3.5MAXTRAC TRK DUPLEX YES3080070N01RVN4178CD MC SERIES, MC2000/2500DDN6124AW/DB25 CONNECTORDDN6367AW/DB9 CONNECTOR RVN41751-CD Rib to MIC connector 1-3.5MCS2000 RKN4062BRVN41131-3.5MCS2000RVN4011 3.5MCX1000YES3000056M01RVN4063 3.5MCX1000 MARINE YES3000056M01RVN4117 3.5MDC/RDLAP DEVICESRVN4105 3.5MOBILE PROG. TOOLRVN4119 3.5MOBITEX DEVICESRVN4128 3.5MPT1327-1200 SERIES YES SEE MANUALRVN4025 3.5MSF5000/PURC/ANALOG YES0180355A30RVN4077 3.5MSF5000/10000FLD YES0180355A30RVN4017K 3.5MT 1000YES RTK4205CRVN4148 3.5MTR 2000YES3082056X02RVN4140 3.5MTRI 2000NORVN41761-CD MTS2000, MT2000*, MTX8000, MTX90001-3.5*programmed by DOS which is included in the RVN4176RVN4131 3.5MTVA CODE PLUG FIXRVN4142 3.5MTVA DOCTOR YES3080070N01RVN4131 3.5MTVA3.EXERVN4013 3.5MTX800 & MTX800S YES RTK4205CRVN4097 1-CD MTX8000/MTX9000,MTS2000,MT2000*,* programmed by DOS which is included in the RVN4176HVN9067CD MTX850/MTX8250MTX950,MTX925RVN4138 3.5MTX-LS YES RKN4035DRVN4035 3.5MX 1000YES RTK4203CRVN4073 3.5MX 800YES RKN4006BHVN9395 P100, P200 LB, P50+, P210, P500, PR3000RVN4134 3.5P100 (HVN9175)P200 LB (HVN9794)P50+ (HVN9395)P210 (HVN9763)P500 (HVN9941)PR3000 (HVN9586)YES RTK4205HVN9852 3.5P110YES HKN9755A/REX1143 HVN9262 3.5P200 UHF/VHF YES RTK4205RVN4129 3.5PDT220YVN4051 3.5PORTABLE REPEATER Portable rptr.P1820/P1821AXRVN4061C 3.5PP 1000/500NO3080385B23 & 5880385B30 RVN5002 3.5QUANTAR/QUANTRO NO3O80369E31RVN4135 3.5R100 (HVN9177)M100/M200/M110/M400YES0180358A52RVN4146 3.5RPM500/660RVN4002 3.5SABER YES RTK4203CRVN4131 3.5SETTLET.EXEHVN9007 3.5SM50 & SM120YESRVN4039 3.5SMART STATUS YES FKN5825AHVN9054 3.5SOFTWARE R03.2 P1225YES3080070N01HVN9001 3.5SOFTWARE R05.00.00 1225LS YES HLN9359AHVN9012 3.5SP50RVN4001N 3.5SPECTRA YES3080369B73 (STANDARD)0180300B10 (HIGH POWER) RVN4099 3.5SPECTRA RAILROAD YES3080369B73RVN4110 3.5STATION ACCESS MODULE NO3080369E31RVN4089A 3.5STX TRANSIT YES0180357A54RVN4051 3.5SYSTEMS SABER YES RTK4203BRVN4075 3.5T5600/T5620 SERIES NO3080385B23HVN9060CD TC3000, TS3000, TR3000RVN4123 3.5VISAR PRIVACY PLUS YES3080371E46FVN4333 3.5VRM 100 TOOLBOX FKN4486A CABLE &ADAPTORRVN4133 3.5VRM 500/600/650/850NORVN4181CD XTS 2500/5000 PORTABLES RKN4105A/RKN4106A RVN41002- 3.5XTS3000 ASTRO PORTABLE/MOBILERVN4170 3.5XTS3500YES RKN4035DRIB SET UPRLN4008E RADIO INTERFACE BOX (RIB)0180357A57RIB AC POWER PACK 120V0180358A56RIB AC POWER PACK 220V3080369B71IBM TO RIB CABLE (25 PIN) (USE WITH XT & PS2)3080369B72IBM TO RIB CABLE (9 PIN)RLN443825 PIN (F) TO 9 PIN (M) ADAPTOR (USE W/3080369B72 FOR AT APPLICATION) 5880385B308 PIN MODULAR TO 25 PIN ”D” ADAPTOR (FOR T5600 ONLY)0180359A29DUPLEX ADAPTOR (MOSTAR/TRAXAR TRNK’D ONLY)Item Disk Radio RIB Cable Number Size Product Required Number Item Disk Radio RIB Cable Number Size Product Required NumberUtilizing your personal computer, Radio Service Software (RSS)/Customer Programming Software (CPS)/CustomerConfiguration Software (CCS) enables you to add or reprogram features/parameters as your requirements change. RSS/CPS/CCS is compatible with IBM XT, AT, PS/2 models 30, 50, 60 and 80.Requires 640K RAM. DOS 3.1 or later. Consult the RSS users guide for the computer configuration and DOS requirements. (ForHT1000, MT/MTS2000, MTX838/8000/9000, Visar and some newer products —IBM model 386, 4 MEG RAM and DOS 5.0 or higher are recommended.) A Radio Interface Box (RIB) may be required as well as the appropriate cables. The RIB and cables must be ordered separately.Licensing:A license is required before a software (RVN) order is placed. The software license is site specific (customer number and ultimate destination tag). All sites/locations must purchase their own software.Be sure to place subsequent orders using the original customer number and ship-to-tag or other licensed sites; ordering software without a licensed customer number and ultimate tag may result in unnecessary delays. To obtain a no charge license agreement kit, order RPX4719. To place an order in the U.S. call 1-800-422-4210. Outside the U.S., FAX 847-576-3023.Subscription Program:The purchase of Radio ServiceSoftware/Customer Programming/Customer ConfigurationSoftware (RVN & HVN kits) entitles the buyer/subscriber to three years of free upgrades. At the end of these three years, the sub-scriber must purchase the same Radio Service Software kit to receive an additional three years of free upgrades. If the sub-scriber does not elect to purchase the same Radio Service Software kit, no upgrades will be sent. Annually a subscription status report is mailed to inform subscribers of the RSS/CPS/CCS items on our database and their expiration dates.Notes:1)A subscription service is offered on “RVN”-Radio Service Software/Customer Programming/Customer Configuration Software kits only.2)“RVN” software must only be procured through Radio Products and Services Division (RPSD). Software not procured through the RPSD will not be recorded on the subscription database; upgrades will not be mailed.3)Upgrades are mailed to the original buyer (customer number & ultimate tag).4)SP software is available through the radio product groups.The Motorola General Radio Service Software Agreement is now available on Motorola Online. If you need assistance please feel free to submit a “Contact Us” or call 800-422-4210.SMART RIB SET UPRLN1015D SMART RIB0180302E27 AC POWER PACK 120V 2580373E86 AC POWER PACK 220V3080390B49SMARTRIB CABLE (9 PIN (F) TO 9 PIN (M) (USE WITH AT)3080390B48SMARTRIB CABLE (25 PIN (F) TO 9 PIN (M) (USE WITH XT)RLN4488ASMART RIB BATTERY PACKWIRELESS DATA GROUP PRODUTS SOFTWARERVN4126 3.59100-386/9100T DEVICES MDVN4965 3.59100-WS/T CONFIG’TN RVN41173.5MDC/RDLAP DEVICESPAGING PRODUCTS MANUALS6881011B54 3.5ADVISOR6881029B90 3.5ADVISOR ELITE 6881023B20 3.5ADVISOR GOLD 6881020B35 3.5ADVISOR PRO FLX 6881032B30 3.5BR8506881032B30 3.5LS3506881032B30 3.5LS5506881032B30 3.5LS7506881033B10 3.5LS9506881035B20 3.5MINITOR III8262947A15 3.5PAGEWRITER 20008262947A15 3.5PAGEWRITER 2000X 6881028B10 3.5TALKABOUT T3406881029B35 3.5TIMEPORT P7308262947A15 3.5TIMEPORT P930NLN3548BUNIVERSAL INTERFACE KITItem Disk Radio NumberSize Product。
ABB-ACS800变频器说明书
• 禁止带电安装或维修传动单元、电机电缆或电机。在切断输入电源之后，应至
少等待 5 分钟，待中间电路电容放电完毕后再进行操作。 还应使用万用表 （阻抗至少为 1 架间的电压接近 0V． 2. 端子 UDC+ 和 UDC- 与柜架间的电压接近 0V．
在危险高电压。
• 制动控制端子 (UDC+, UDC-, R+ 和 R- 端子 ) 带有危险直流高电压 ( 大于 500
锂电池保护板常销元器件型号表
RICOH理光 RICOH理光 RICOH理光 RICOH理光 RICOH理光 RICOH理光 RICOH理光 RICOH理光 RICOH理光 MITSUMI美之美 MITSUMI美之美 MITSUMI美之美 MITSUMI美之美 MITSUMI美之美 MITSUMI美之美 MITSUMI美之美 MITSUMI美之美
SEIKO精工
SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工 SEIKO精工
替换型号 R5402N106KD R5402N120KD R5402N163KD
R5460N207AA R5460N211AA
S-812C30AMC-C2KT2G
S-812C33AMC-C2KT2G S-812C50AMC-C3ET2G S-812C50AUA-C3ET2
S-8355M50MC S-8355M20MC S-8355M18MC S-875061EUP S-873062EUP S-8211CAM S-8211CAZ S-8211CAS S-8211CAJ-I6T1G
备注
单节 单节 单节 单节 单节 单节 单节 单节 单节，磷酸铁锂 单节 双节 双节 双节 双节 双节 双节 双节 2-3节，老版本 2-3节，老版本 2-3节，老版本 三-四节 三-四节，不常用 三-四节 三-四节 三-四节 三-四节 三-四节
R5400N110FA R5400N149FA R5400N102CA R5421N139FA R5421N151FA R5421N152FA R5426N128EA R5402N101KD R5402N102KD R5402N110KD R5402N149KD R5402N163KD R5402N120KD R5402N128EC R5402N176EC R5408N185KH R5408N191KH
遥控器和行输出可替代型号对照表
Ｎ２１Ｋ７／８机型的遥控器是通Байду номын сангаас的
RC-C04T RC-C07T RC-C08T RC-C09T RC-C10T RC-C11T RC-C14T RC-C202 RC-D001 RC-E01D RC-E03T RC-E04T RC-E05T RC-E06T RC-E07T RC-E08T RC-E09T RC-E11T RC-E13T RC-E16T RC-E18T RC-E19T RC-E20T RC-E27T RC-E30T RC-E33T RC-E34T RC-E35T RC-E39T RC-E41T RC-E43T RC-E47T RC-E49T RC-E54T RC-E59T RC-F01T RC-F02T RC-F04T RC-F06T RC-F09T RC-F10T RC-F11T RC-F13T RC-F14T RC-F15T RC-F18T
封装及命名规则
LIU 串行数据列接口单元
SW 模拟开关
MAT 配对晶体管
SSM 声频产品
MUX 多路调制器
TMP 温度传感器
2．器件型号
3．老化选择：AD 大部分温度范围在 0℃～＋70℃、～25℃～＋85℃、
－40 ℃～＋85℃的产品经过老化，有 BI 标记的表示经老化测试。
4．电气等级
5．封装形式： H 6 腿 TO-78
5
威尔泰电子
精心收集 助您认识各国品牌 IC 封装及命名规则
LE 的现有产品继续使用这一指定，但是将来会转换为 R。
命名规则示例：
对于现有器件 -- SN74LVTxxxDBLE 对于新增或更换器件 -- SN74LVTxxxADBR LE -- 左印（仅对于 DB 和 PW 封装有效） R -- 标准（仅对于除了现有 DB 和 PW 器件之外的所有贴面封装有效）
K -- 下冲-保护电路 (CBTK)
R -- 输入/输出阻尼电阻 (LVCR)
S -- 肖特基钳位二极管 (CBTS)
Z -- 上电三态 (LVCZ)
5. 位宽
空 = 门、MSI 和八进制
1G -- 单门
8 -- 八进制 IEEE 1149.1 (JTAG)
16 -- Widebus™（16 位、18 位和 20 位）
PQFP 封装的芯片引脚之间距离很小， 管脚很细，一般大规模或超大规模集成 电路采用这种封装形式，其引脚数一般 都在 100 以上。
1968～1969 年菲为浦公司就开发出小外 形封装（SOP）。以后逐渐派生出 SOJ（J 型引脚小外形封装）、TSOP（薄小外形 SOP Small Outline Package 封装）、VSOP（甚小外形封装）、SSOP （缩小型 SOP）、TSSOP（薄的缩小型 SOP）及 SOT（小外形晶体管）、SOIC （小外形集成电路）等。
贴片电阻常见封装有9种,用两种尺寸代码来表示
1.0mrn＞：0.5mm 尺寸贴片电咀缪1 005(0402)贴片电阻常见封装有9种，用两种尺寸代码来表示。
一种尺寸代码是由4位数字表示的EIA(美国电子工业协会)代码，前两位与后两位分别表示电阻的长与宽，以英寸为单位。
我们常说的0603封装就是指英制代码。
另一种是米制代码，也由4位数字表示，其单位为毫米。
下表列出贴片电阻封装英制和公制的关系及详细的尺寸：贴片元件的封装一、零件规格:(a)、零件规格即零件的外形尺寸，SMT发展至今，业界为方便作业，已经形成了一个标准零件系列，各家零件供货商皆是按这一标准制造。
标准零件之尺寸规格有英制与公制两种表示方法，如下表英制表示法1206 0805 0603 0402公制表示法3216 2125 1608 1005含义L:1.2inch(3.2mm)W:0.6inch(1.6mm)L:0.8inch(2.0mm)W:0.5inch(1.25mm)L:0.6inch(1.6mm)W:0.3inch(0.8mm)L:0.4inch(1.0mm)W:0.2inch(0.5mm)注：a、L (Length)：长度；W (Width)：宽度；inch：英寸b、1inch=25.4mm(b)、在(1)中未提及零件的厚度，在这一点上因零件不同而有所差异，在生产时应以实际量测为准。
(c)、以上所讲的主要是针对电子产品中用量最大的电阻(排阻)和电容(排容)，其它如电感、二极管、晶体管等等因用量较小，且形状也多种多样，在此不作讨论。
(d)、SMT发展至今，随着电子产品集成度的不断提高，标准零件逐步向微型化发展，如今最小的标准零件已经到了0201。
二、常用元件封装1)电阻：最为常见的有0805、0603两类，不同的是，它可以以排阻的身份出现，四位、八位都有，具体封装样式可参照MD16仿真版，也可以到设计所内部PCB库查询。
注：ABCD四类型的封装形式则为其具体尺寸，标注形式为L X S X H1210具体尺寸与电解电容B类3528类型相同0805具体尺寸：2.0 X 1.25 X 0.5 (公制表示法)1206具体尺寸：3.0 X 1.5 0X 0.5 (公制表示法)2)电阻的命名方法1、5%精度的命名：RS - 05 K 102 JT2、1 % 精度的命名：RS - 05 K 1002 FTR 一表示电阻S 一表示功率0402 是1/16W、0603 是1/10W、0805 是1/8W、1206 是1/4W、1210 是1/3W、1812 是1/2W、2010 是3/4W、2512 是1W。
Vishay 反冲高功率厚膜片电阻说明书
RCS040210K0JNE D RCS040210R0FKEDRCS040220K0FKEDRCS0603100RFKEARCS0603150RFKEARCS e3VishayAnti-Surge, High Power Thick Film Chip ResistorsLINKS TO ADDITIONAL RESOURCESThe anti-surge thick film chip resistor series combines a significantly higher power rating and pulse load performance as compared to standard chip resistors.FEATURES•Excellent surge pulse capability •Superior ESD surge characteristics •High power rating •AEC-Q200 qualified•Material categorization: for definitions of compliance please see /doc?99912APPLICATIONS•Automotive •Industrial•Telecommunications •MedicalNote(1)Please refer to APPLICATION INFORMATION belowAPPLICATION INFORMATIONWhen the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature is not exceeded.These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing afunctional lifetime.3D 3D3D ModelsTECHNICAL SPECIFICATIONSDESCRIPTION RCS0402 e3RCS0603 e3RCS0805 e3RCS1206 e3Imperial size 0402060308051206Metric size code RR1005MRR1608MRR2012MRR3126MResistance range 1 Ω to 10 M Ω; jumper (0 Ω)Resistance tolerance ± 5 %; ± 1 %; ± 0.5 %Temperature coefficient ± 200 ppm/K; ± 100 ppm/K Rated dissipation, P 70 (1)0.2 W 0.25 W 0.5 W 0.5 W Operating voltage, U max. AC RMS /DC 50 V 75 V150 V200 VPermissible film temperature, ϑF max. (1)155 °C Operating temperature range -55 °C to +155 °CMax. resistance change at P 70 for resistance range, |ΔR /R | after:1000 h ≤ 1.0 %8000 h≤ 2.0 %Permissible voltage against ambient (insulation):1 min, U ins75 V100 V200 V300 VFailure rate: FIT observed≤ 0.1 x 10-9/hRCS e3VishayNote•The temperature coefficient of resistance (TCR) is not specified for 0 Ω jumpersTEMPERATURE COEFFICIENT AND RESISTANCE RANGETYPE / SIZETCR TOLERANCERESISTANCE E-SERIES RCS0402 e3± 200 ppm/K± 5 % 1 Ω to 10 M ΩE24± 100 ppm/K ± 1 % 1 Ω to 10 M ΩE24; E96± 100 ppm/K ± 0.5 % 1 Ω to 10 M ΩE24; E96Jumper, I max. = 3 A ≤ 20 m Ω0 Ω-RCS0603 e3± 200 ppm/K± 5 % 1 Ω to 10 M ΩE24± 100 ppm/K ± 1 % 1 Ω to 10 M ΩE24; E96± 100 ppm/K ± 0.5 % 1 Ω to 10 M ΩE24; E96Jumper, I max. = 3.5 A≤ 20 m Ω0 Ω-RCS0805 e3± 200 ppm/K± 5 % 1 Ω to 10 M ΩE24± 100 ppm/K ± 1 % 1 Ω to 10 M ΩE24; E96± 100 ppm/K ± 0.5 % 1 Ω to 10 M ΩE24; E96Jumper, I max. = 4 A ≤ 20 m Ω0 Ω-RCS1206 e3± 200 ppm/K± 5 % 1 Ω to 10 M ΩE24± 100 ppm/K ± 1 % 1 Ω to 10 M ΩE24; E96± 100 ppm/K ± 0.5 % 1 Ω to 10 M ΩE24; E96Jumper, I max. = 5 A≤ 20 m Ω0 Ω-PACKAGINGTYPE / SIZE CODE QUANTITY PACKAGING STYLEWIDTHPITCH PACKAGING DIMENSIONS RCS0402 e3ED = ET710 000Paper tape according to IEC 60286-3, Type 1a8 mm2 mmØ 180 mm/7"EE = EF450 000Ø 330 mm/13"RCS0603 e3EI = ET25000 2 mmØ 180 mm/7"ED = ET310 000Ø 180 mm/7"EL = ET420 000Ø 285 mm/11.25"EE = ET850 000Ø 330 mm/13"EA = ET15000 4 mm Ø 180 mm/7"EB = ET510 000Ø 285 mm/11.25"EC = ET620 000Ø 330 mm/13"RCS0805 e3EA = ET15000 4 mmØ 180 mm/7"EB = ET510 000Ø 285 mm/11.25"EC = ET620 000Ø 330 mm/13"RCS1206 e3EA = ET15000 4 mm Ø 180 mm/7"EB = ET510 000Ø 285 mm/11.25"EC = ET620 000Ø 330 mm/13"RCS e3 VishayPART NUMBER AND PRODUCT DESCRIPTIONPart Number: RCS0805100RFKECPart Number: RCS08050000Z0ECTYPE / SIZE RESISTANCE TOLERANCE TCR PACKAGINGRCS0402 RCS0603 RCS0805 RCS1206R = decimalK = thousandM = million0000 = jumperD = ± 0.5 %F = ± 1.0 %J = ± 5.0 %Z = jumperK = ± 100 ppm/KN = ± 200 ppm/K0 = jumperEA, EB,EC, ED,EE, EI,ELProduct Description: RCS0805 100 100R 1 % ET6 e3Product Description: RCS0805 0R0 ET6 e3RCS0805100100R 1 %ET6e3 TYPE / SIZE TCR RESISTANCE TOLERANCE PACKAGING LEAD (Pb)-FREERCS0402 RCS0603 RCS0805 RCS1206± 100 ppm/K± 200 ppm/K10R = 10 Ω100R = 100 Ω10K = 10 kΩ1M0 = 1 MΩ0R0 = jumper± 0.5 %± 1.0 %± 5.0 %ET1, ET2,ET3, ET4,ET5, ET6,ET7, ET8,EF4e3 = pure tintermination finishR C S085100R F K E CRCS e3 VishayDESCRIPTIONProduction is strictly controlled and follows an extensive set of instructions established for reproducibility. A cermet film layer and a glass-over are deposited on a high grade (AI2O3) ceramic substrate with its prepared inner contacts on both sides. A special laser is used to achieve the target value and the desired power dissipation performance by smoothly fine trimming the resistive layer without damaging the ceramics. The resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. The terminations receive a final pure matte tin on nickel plating.The result of the determined production is verified by an extensive testing procedure on 100 % of the individual chip resistors. Only accepted products are laid directly into the tape in accordance with IEC 60286-3 Type 1a (1). ASSEMBLYThe resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapor phase as shown in IEC 61760-1. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings potting compounds and their processes, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. The resistors are RoHS-compliant, the pure matte tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years. The immunity of the plating against tin whisker growth has been proven under extensive testing.MATERIALSVishay acknowledges the following systems for the regulation of hazardous substances:•IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (2)•The Global Automotive Declarable Substance List (GADSL) (3)•The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (4) for its supply chain The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see /how/leadfree.Hence the products fully comply with the following directives:•2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II)•2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU•2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE)Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at /doc?49037.APPROVALSThe resistors are qualified according to AEC-Q200.Where applicable, the resistors are tested in accordance with EN 140401-802 which refers to EN 60115-1, EN 60115-8 and the variety of environmental test procedures of the IEC 60068 (1) series.RELATED PRODUCTSF or more information about products with superior surge and pulse performance please refer to D/CRCW-IF e3, Pulse Proof Thick F ilm Chip Resistors datasheet (/doc?20024).The CRCW-HP e3 product series is designed for those applications where both enhanced power rating and superior pulse loading performance is required.For ordering CRCW-HP e3 please refer to latest edition of datasheet (/doc?20043).For thick film resistors with standard requirements for power rating, please refer to D/CRCW e3, Standard Thick Film Chip Resistors datasheet (/doc?20035)Notes(1)The quoted IEC standards are also released as EN standards with the same number and identical contents(2)The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474.(3)The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at (4)The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-tableRCS e3VishayFUNCTIONAL PERFORMANCESingle Pulse High Power Overload 1.2 μs / 50 μs PulsePulse load rating in accordance with EN 60115-1, 4.27; 1.2 μs / 50 μs;5 pulses at 12 s intervals; for permissible resistance change 1 %Single Pulse High Power Overload 10 μs / 700 μs PulsePulse load rating in accordance with EN 60115-1, 4.27; 10 μs / 700 μs;10 pulses at 1 min intervals; for permissible resistance change 1 %Single PulseMaximum pulse load, single pulse; applicable if P → 0 and n < 1000 and = max.;for permissible resistance change equivalent to 8000 h operation110100100010 000110100100010 000100 000P e a k V o l t a g e (V )Resistance Value (Ω)110100100010 000110100100010 000100 000P e a k V o l t a g e (V )Resistance Value (Ω)0.010.1110100100010 0000.0000010.000010.00010.0010.010.1110100^P m a x .-P u l s e L o a d (W )t i -Pulse Duration (s)U ˆU ˆRCS e3VishayContinuous PulseMaximum pulse load, continuous pulses; applicable if P ≤ P (ϑamb ) and = max.;for permissible resistance change equivalent to 8000 h operationPulse VoltageMaximum pulse voltage, single and continuous pulses; applicable if = max.;for permissible resistance change equivalent to 8000 h operationDerating0.010.1110100100010 0000.0000010.000010.00010.0010.010.1110100^P m a x .-P u l s e L o a d (W )t i -Pulse Duration (s)U ˆU ˆ02004006008000.0000010.000010.00010.0010.010.1110^U m a x .-P u l s e V o l t a g e (V )t i-Pulse Duration (s)PˆP ˆ00.10.20.30.40.50.6P -P o w e r D i s s i p a t i o n (W )ϑamb -Ambient Temperature (°C)RCS e3VishayTESTS AND REQUIREMENTSAll executed tests are carried out in accordance with the following specifications:EN 60115-1, generic specificationEN 60115-8 (successor of EN 140400), sectional specificationEN 140401-802, detail specification IEC 60068-2-xx, test methodsThe parameters stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN 140401-802. The table presents only the most important tests, for the full test schedule refer to the documents listed above. However, some additional tests and a number of improvements against those minimum requirements have been included.The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5201-1.The tests are carried out under standard atmospheric conditions in accordance with IEC 60068-1, 4.3, whereupon the following values are applied:Temperature: 15 °C to 35 °C Relative humidity: 25 % to 75 %Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).A climatic category LCT / UCT / 56 is applied, defined by the lower category temperature (LCT), the upper category temperature (UCT), and the duration of exposure in the damp heat, steady state test (56 days).The components are mounted for testing on boards in accordance with EN 60115-8, 2.4.2 unless otherwise specified.TEST PROCEDURES AND REQUIREMENTSEN60115-1 CLAUSE IEC 60068-2 (1)TEST METHODTESTPROCEDUREREQUIREMENTS PERMISSIBLECHANGE (ΔR )STABILITY CLASS 1OR BETTER STABILITY CLASS 2OR BETTERStability for product types:1 Ω to 10 M ΩRCS e34.5-Resistance -± 0.5 %; ± 1 %± 5 %4.8-Temperature coefficientAt (20 / -55 / 20) °C and(20 / 155 / 20) °C± 100 ppm/K± 200 ppm/K4.25.1-Endurance at 70 °CU = or U = U max. whichever is the less severe;1.5 h on; 0.5 h off 70 °C; 1000 h ± (1 % R + 0.05 Ω)± (2 % R + 0.1 Ω)70 °C; 8000 h± (2 % R + 0.1 Ω)± (4 % R + 0.1 Ω)4.25.3-Endurance at upper category temperature 155 °C; 1000 h± (1 % R + 0.05 Ω)± (2 % R + 0.1 Ω)4.2478 (Cab)Damp heat, steady state (40 ± 2) °C; 56 days;(93 ± 3) % RH± (1 % R + 0.05 Ω)4.3767 (Cy)Damp heat, steady state,accelerated (85 ± 2) °C; (85 ± 5) % RH U = ≤ 100 V;1000 h ± (1 % R + 0.05 Ω)± (2 % R + 0.1 Ω)4.23-Climatic sequence:± (1 % R + 0.05 Ω)± (2 % R + 0.1 Ω)4.23.2 2 (Bb)Dry heat 125 °C; 16 h4.23.330 (Db)Damp 55 °C; 24 h; ≥ 90 % RH; 1 cycle4.23.4 1 (Ab)Cold-55 °C; 2 h4.23.513 (M)Low air pressure 8.5 kPa; 2 h; (25 ± 10) °C4.23.630 (Db)Damp heat, cyclic55 °C; 24 h;≥ 90 % RH; 5 cycles 4.23.7-DC load U = ≤ U max.; 1 min- 1 (Aa)Cold -55 °C; 2 h± (0.25 % R + 0.05 Ω)± (0.5 % R + 0.05 Ω)4.1914 (Na)Rapid change of temperature 30 min. at -55 °C and 30 min. at 125 °C 1000 cycles± (1 % R + 0.05 Ω)no visible damage 4.13-Short time overloadU = 2.5 x ≤ 2 x U max.;whichever is the less severe; 5 s± (2 % R + 0.05 Ω)4.27-Single pulsehigh voltage overload Severity no. 4:U = 10 x or U = 2 x U max.;whichever is the less severe;10 pulses 10 μs / 700 μs± (1 % R + 0.05 Ω)no visible damageP 70 x R 0.1 x P 85 x R P 70 x R P 70 x R P 70 x RRCS e3VishayNote(1)The quoted IEC standards are also released as EN standards with the same number and identical contents4.39-Periodic electric overloadU = orU = 2 x U max.;whichever is the less severe;0.1 s on; 2.5 s off;1000 cycles ± (1 % R + 0.05 Ω)no visible damage4.38-Electrostatic discharge (human body model)IEC 61340-3-1 (1);3 positive + 3 negative discharges;ESD voltage according to the size± (1 % R + 0.05 Ω)4.22 6 (Fc)VibrationEndurance by sweeping;10 Hz to 2000 Hz;no resonance;amplitude ≤ 1.5 mm or ≤ 200 m/s 2;7.5 h± (0.25 % R + 0.05 Ω)no visible damage ± (0.5 % R + 0.05 Ω)no visible damage4.1758 (Td)SolderabilitySolder bath method,SnPb40; non-activated flux (235 ± 5) °C; (2 ± 0.2) s Good tinning (≥ 95 % covered);no visible damageSolder bath method,Sn96.5Ag3Cu0.5; non-activated flux (245 ± 5) °C; (3 ± 0.3) s 4.1858 (Td)Resistance to soldering heat Soldering bath method;(260 ± 5) °C; (10 ± 1) s ± (0.25 % R + 0.05 Ω)± (0.5 % R + 0.05 Ω)4.2945 (XA)Component solventresistance Isopropyl alcohol +50 °C;method 2No visible damage 4.3221 (Ue 3)Shear (adhesion)RCS0402 e3: 9 NRCS0603 e3 to RCS1206 e3: 17.7 NNo visible damage 4.3321 (Ue 1)Substrate bending Depth 2 mm; 3 times ± (0.25 % R + 0.05 Ω)no visible damage,no open circuit in bent position 4.7-Voltage proof U = 1.4 x U ins ; 60 s No flashover or breakdown4.35-Flammability,needle flame testIEC 60695-11-5 (1);10 sNo burning after 30 sTEST PROCEDURES AND REQUIREMENTSEN60115-1 CLAUSEIEC 60068-2 (1)TEST METHODTESTPROCEDUREREQUIREMENTS PERMISSIBLECHANGE (ΔR )STABILITY CLASS 1OR BETTER STABILITY CLASS 2OR BETTERStability for product types:1 Ω to 10 M ΩRCS e315 x P 70 x RRCS e3VishayDIMENSIONSSOLDER PAD DIMENSIONSNotes•The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g in standards IEC 61188-5-x (1) or in publication IPC-7351(1)The quoted IEC standards are also released as EN standards with the same number and identical contentsDIMENSIONS AND MASSTYPE / SIZE L (mm)W (mm)H (mm)T1(mm)T2(mm)MASS (mg)RCS0402 e3 1.0 ± 0.050.5 ± 0.050.35 ± 0.050.25 ± 0.100.2 ± 0.100.65RCS0603 e3 1.55 + 0.10 / - 0.050.85 ± 0.100.45 ± 0.050.3 ± 0.200.3 ± 0.202RCS0805 e3 2.0 + 0.20 / - 0.10 1.25 ± 0.150.45 ± 0.050.3 + 0.20 / - 0.100.3 ± 0.20 5.5RCS1206 e33.2 + 0.10 / - 0.201.6 ± 0.150.55 ± 0.100.45 ± 0.200.4 ± 0.2010RECOMMENDED SOLDER PAD DIMENSIONSTYPE / SIZEWAVE SOLDERINGREFLOW SOLDERING G (mm)Y (mm)X (mm)Z (mm)G (mm)Y (mm)X (mm)Z (mm)RCS0402 e3----0.450.60.6 1.65RCS0603 e30.65 1.10 1.252.850.750.75 1.00 2.25RCS0805 e30.90 1.30 1.603.50 1.000.95 1.45 2.90RCS1206 e31.401.401.954.201.501.051.803.60HLegal Disclaimer Notice VishayDisclaimerALL PRODU CT, PRODU CT SPECIFICATIONS AND DATA ARE SU BJECT TO CHANGE WITHOU T NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein.Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVEDRevision: 01-Jan-20231Document Number: 91000RCS06033K30FKE A RCS06034K70FKEARCS08051K00FKEARCS040210K0JNE D RCS040210R0FKEDRCS040220K0FKEDRCS0603100RFKEARCS0603150RFKEA。
ad中0603的封装电容 -回复
ad中0603的封装电容-回复广告中的0603封装电容是一种非常常见的电子元件，它在电子电路中起着至关重要的作用。
本文将逐步回答以下问题：什么是0603封装电容？它的特点是什么？在电子电路中起到了什么作用？如何正确选择和使用0603封装电容？一、什么是0603封装电容？0603封装电容是一种表面贴装技术（SMT）封装的电容器。
它的尺寸为0.06英寸× 0.03英寸（1.6 mm × 0.8 mm）。
它通常由内电极和外极之间的绝缘介质组成，外极常用金属箔或者金属化的电解质涂层。
二、0603封装电容的特点有哪些？1. 尺寸小：0603封装电容体积小巧，适合在有限空间内使用，特别适用于小型电子设备。
2. 重量轻：由于其小尺寸，0603封装电容重量轻，可以减少整个电路板的重量。
3. 高频特性好：由于内电极的特殊结构设计，0603封装电容具有很好的高频特性，适用于高频电路应用。
4. 低ESR：ESR是等效串联电阻的缩写，0603封装电容的ESR通常较低，能够提供稳定的电流输出。
三、0603封装电容在电子电路中起到了什么作用？0603封装电容在电子电路中承担着存储和释放电荷的重要作用。
它可以吸收和储存电子器件中的起伏不定的电压，以便在需要时释放这些电压，以保持电路的稳定性和可靠性。
它可以用于去除电源中的噪声信号，提供稳定的电源电压。
四、如何正确选择和使用0603封装电容？1. 电容值的选择：根据电路设计的需求和性能要求选择合适的电容值。
0603封装电容的容值范围很广，一般从几皮法（pF）到几百微法（μF）。
2. 工作电压的选择：根据电路的工作电压选择合适的0603封装电容，以确保电容器的额定工作电压大于电路的最大工作电压。
3. 精度的选择：根据电路的精度要求选择合适的精度等级，一般有标准精度、高精度等级可供选择。
4. 温度系数的选择：根据应用场景的温度变化情况选择合适的温度系数等级。
在使用0603封装电容时，还需注意以下几点：1. 焊接温度：正确控制焊接温度，避免温度过高导致电容器损坏。
电子工厂常用物料编码规范
物料编码规X1. X围本规X规定了##电子技术##在采购、生产、仓管中所有物料的编码规那么。
本规X适用于##电子技术##。
新增物料的引用都必须遵守此规X。
2. 概述物料编码是以简单的文字符号或数字来代表物料的品名、规格或类别与其它有关事项的一种管理工具。
本规X的目的是便于物料的采购、跟催、验收、查询、领发、盘点、储存等工作，物料的电脑化管理，使各部门提高工作效率。
3. 编码原那么物料编码必须遵守物料编码的原那么，合理的物料编码，必须具备以下根本条件：3.1.唯一性：是指一个物料编码只能代表一种物料，同一种物料只能找到一个物料编码，而绝无一种物料有数个物料编码，或一个物料编码有数种物料。
3.2.简单性：编码的目的在于将物料化繁为简，便于物料的管理，因此物料编码在应用文字符号或数字上应力求简单明了，这样可节省阅读、填写、录入的时间，并可减少其中的错误机会。
3.3.完整性：在物料编码时，所有的物料都应有物料编码可归，这样的物料编码才能完整。
假设某些物料找不到赋予的物料编码，那么物料编码缺乏完整性。
3.4.伸缩性：物料编码要考虑到未来新产品开展和产品规格的变更而发生物料扩展或变动的情形。
４. 名词术语成形：施加一外力，改变元件引线的走向或直径，使之形成所要求的几何形状。
５. 编码规定本编码系统格式根本由分类码、规格码、附属码与供给商区分码四局部组成，力求尽可能反响物料的特征。
分类码包括大分类、小分类代码；规格码包含物料的规格、属性；附属码是便于区分同种物料不同状态〔如成形、封装等〕；最后一位〔X〕当供给商需要加以区别时进展顺序编码，不用区别时以“0〞编码。
为了表达物料编码的唯一性，一般采用重新编码加以区分不同的供给商或同一物料不同版本的情况。
编码采用24个大写英文字母〔I 、O 除外，防止与数字1、0混淆〕与阿拉伯数字0～9混合使用，固定长度12位。
６. 编码方法本编码系统主要采用暗示编码法〔即从编码中可以获取物料的相关信息〕。
RC-03到RC-04升级指南：使用适配器线缆说明书
How to Upgrade an RC-03 to RC-04 using the adapter cable:The adapter cable will assist in a simpler transition when upgrading an RC-03 to anRC-04. By using the adapter cable you donot need to run a new 8 wire pigtail, you can use the existing 12 wire pigtail and the adapter will re-orient the RC-03 pigtailconductors to the RC-04 pigtail color code. The wire colors changed from the RC-03 pigtail to the RC-04 pigtail andtherefore requires that you update the connections at the end of the 12 pin pigtail to the peripherals at the door.Step by Step Process:1. Review the current wiring at the door2. Determine if extra hardware or alternative wiring is needed (uncommon). See below for somescenarios that you may run into out in the field: Scenarios:a. If the RC-03 is powered by 24vdc then a change must be made; the RC-04 only accepts 12VDC or PoE power. Either power the RC-04 by PoE or use a Altronix VR3T to “step down” the24vdc to 12vdc.b. If there is 24vdc to the lock using the RC-03 internal relay, then either an ISONAS AdvancedSecurity Module (previously EDK) (secure) or Altronix RBSN (unsecure) is needed.c. If there is a 12vdc lock drawing more than 600ma and no Advanced Security Module, thenan ASM or RBSN will be needed. (The output on the RC-04 will only provide up to 600maout)d. If both the AUX and REX are used, they will need to be condensed into one input (called AUXor REX on the RC-04).e. If TTLs or a WIM are being used, please consult ISONAS pre-sales for alternative solutions at******************.3. Disconnect the RC-034. Rewire the connections according to the RC-04 wiring diagram, for more information click here .5. Install the RC-04, see our quick install up guide here .6. Next you will need to configure the new reader and connect it to Pure Access7. Log into Pure Access, edit the existing access point and take a screenshot of the information. *Do not deactivate the access point and replace it with the RC-04!8. Deactivate and then delete the access point.First Deactivate the access pointThen Delete the access pointWiring Concept: RC-04Rear-View RC-03 to RC-04 Adapter Cable Existing RC-03Pigatil9.Add in the RC-04 as a new access point using the information from the screenshot.10.Run Update and testWiring Conversion Chart, which RC-03 pigtail wires match the RC-04RC03 Cable ColorCode (Standard RC03 Pigtail colors) Cable AdaptorCable ColorCode (Standard RC04Pigtail color)NotesRed(12V in/out) or (24V in) Orange (SeeNote) (12VDCin/out)Important: Validate that any input DC Power is 12VDCRC04 is not designed for 24VDC operation. Attaching 24VDC to the RC04will invalidate the unit’s warrantee and may damage the unit.Black (Common)Black and/orBrownRC04 supports two “common” conductors, to simplify connectingmultiple devices to the “common”. These BLACK/BROWN conduc tors areinterchangeable.Tan (FailSecure) Red Host software must be configured for “FailSecure” operation. Assumesthe previous RC03 did not use the PINK wire.Gray (FailSafe) Red Host software must be configured for “FailSafe” operation. Assumes theprevious RC03 did not use the PINK wire.If your installation was using an ACC-IRS-4000 in-rush suppressor (IRS),assure the IRS is installed between the 12V source, and the lock.Pink (Relay In) Not used If the PINK wire was used, then the RC04 installation will need an EDKinstalled to control the voltage/signal that was supplied on the RC03’sPINK wire.If your installation was using an EDK, the PINK & TAN wires will bereplaced by the RC04’s YELLOW and WHITE. Please refer to the PureIPInstallation Guide for more details on the installation of the EDK Green (REX) Green (see note) Host software must be configured to process this input as a “REX”. RC04supports either a REX or AUX. If both were in-use, select the mostdesirable feature for that door.Blue (DoorSensor)Blue Direct replacement of the RC03’s functionOrange (AUX) Green (see note) Host software must be configured to process this input as an “AUX”.RC04 supports either a REX or AUX. If both were in-use, select the mostdesirable feature for that door.Any existing RC03 AUX input connection must be disconnected fromRC04’s ORANGE wire. If the RC04’s GREEN wire is being used as a REXinput, then disconnect the AUX device from the RC04.Purple (TTL1) Not Used Feature is not supported by the RC04Brown (TTL2) Not Used Feature is not supported by the RC04Yellow (RS232) Not Used Feature is not supported by the RC04White (RS232) Not Used Feature is not supported by the RC04。
PSP主板型号怎么看
PSP主板型号怎么看
很多小伙伴使用的PSP主板，却不知道PSP的主板型号如何查看。
了解电脑的主板型号有助于我们更好的理解电脑，装配更合适电脑的软件。
那么如何查看呢?其实每个字母开头的型号都有不同的意思，具体的介绍一起来看看吧。
PSP主板型号详细介绍Kernel version(核心版本)：检测目前用哪个核心版本运行该自制程式
Tachyon：好像是晶片版本,其中包含CPU(中央处理器) GPU(图形处理器)和ME(媒体引擎)
Baryon：这版本号码是你PSP的Syscon(系统控制) 晶片,已得知0x00234000无法修改电池成为潘朵拉
Pommel：PSP的GDIO(通用型之输入输出)/watchdog(看门狗计时器),处理系统事件并且在发生冲突时进行关闭
Kirk：PSP的主要解密/验证晶片
Spock：次要解密晶片,只用来解密UMD光碟上的数据Motherboard type：主板类型,事实上就是PSP类型啦,Fat(PSP-100X)/Slim(PSP-200X)
Motherboard model：主板型号,TA-XXX,已得知目前TA-085V2无法修改电池成为潘朵拉
PSP version：PSP主机板本(不是系统版本喔)
哦哦查为您带来的PSP主板型号详细介绍。
希望可以解决掉您的困惑，如有。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
GLOBAL PART NUMBER INFORMATION
Part Number: RCWE060351L0FNEA
R
C
W
E
0
6
0
3
5
1
L
0
F
N
E
A
GLOBAL MODEL RCWE0402 RCWE0603 RCWE0805 RCWE1206 RCWE1210 RCWE2010 RCWE2512 Revision: 12-Dec-11
PERFORMANCE
TEST Thermal shock Short time overload High temperature exposure Temperature cycling Biased humidity Mechanical shock Vibration Operational life Resistance to solder heat Moisture resistance MIL-STD-202, method 107, - 55 °C to + 125 °C, 300 cycles at each extreme 2 x rated power; duration according the model MIL-STD-202, method 108, 1000 h at T = 125 °C, 0 % power JESD 22, method JA-104, 1000 cycles (- 55 °C to + 125 °C) MIL-STD-202, method 103, 1000 h 85 °C/85 % RH, 10 % x (P x R)1/2 MIL-STD-202, method 213, condition C, 10 g’s, 6 ms (half sine), 3 directions MIL-STD-202, method 108, 1000 h at T = 125 °C at rated power MIL-STD-202, method 106, 0 % power, 7a and 7b not required
DERATING
Rated Power in %
120 100
80
60
40 20
0 - 55
- 25
0
25
75 70
100
125
155
175
Ambient Temperature in °C
Document Number: 20019 2 For technical questions, contact: ff2cresistors@ THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?91000 /
Revision: 12-Dec-11
RCWE
Vishay Dale
CONDITIONS OF TEST TEST LIMITS ± (1.0 % + 0.0005 ) R ± (0.5 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R ± (1.0 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R ± (2.0 % + 0.0005 ) R
VALUE L = m * R = Decimal 10L0 = 0.01 R470 = 0.47 Note: * Use “L” for resistance values < 0.1
TOLERANCE F = ± 1.0 % J = ± 5.0 %
TCR K = ± 100 ppm/°C N = ± 200 ppm/°C M = ± 300 ppm/°C Q = ± 400 ppm/°C P = ± 500 ppm/°C T = ± 600 ppm/°C G = ± 700 ppm/°C
RCWE0402 0.033 to 0.976 1.05 ± 0.05 0.55 ± 0.05 0.35 ± 0.1 0.3 ± 0.15 0.25 ± 0.1 RCWE0603 RCWE0805 1.6 ± 0.1 2.0 ± 0.15 0.85 ± 0.1 1.3 ± 0.1 0.5 ± 0.1 0.55 ± 0.1 0.5 ± 0.2 0.3 ± 0.2 0.6 ± 0.2 0.4 ± 0.2 0.9 ± 0.2 0.8 ± 0.2 0.45 ± 0.2 0.8 ± 0.2 0.4 ± 0.2 1.6 ± 0.3 0.7 ± 0.3 0.7 ± 0.3 2.0 ± 0.3 0.8 ± 0.3 0.8 ± 0.3 0.3 ± 0.2 0.35 ± 0.2
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL MODEL RCWE0402 CASE SIZE POWER RATING P70 °C W 0.125 TEMPERATURE COEFFICIENT ± ppm/°C 400 200 100 700 400 200 100 400 300 200 100 600 300 200 100 500 300 200 100 600 300 200 100 600 300 200 100 RESISTANCE RANGE 0.033 to 0.05 0.051 to 0.18 0.2 to 0.976 0.010 to 0.018 0.02 to 0.03 0.033 to 0.1 0.11 to 0.976 0.010 to 0.018 0.02 to 0.03 0.033 to 0.05 0.051 to 0.976 0.010 to 0.018 0.02 to 0.03 0.033 to 0.05 0.051 to 0.976 0.010 to 0.018 0.02 to 0.03 0.033 to 0.05 0.051 to 0.976 0.010 to 0.018 0.02 to 0.03 0.033 to 0.05 0.051 to 0.976 0.010 to 0.018 0.02 to 0.03 0.033 to 0.05 0.051 to 0.976 TOLERANCE ±% 5 1, 5 1, 5 5 1, 5 1, 5 1, 5 5 1, 5 1, 5 1, 5 5 1, 5 1, 5 1, 5 5 1, 5 1, 5 1, 5 5 1, 5 1, 5 1, 5 5 1, 5 1, 5 1, 5 E-SERIES
DIMENSIONS
l a
b
DIMENSIONS in millimeters MODEL RESISTANCE RANGE 0.01 to 0.03 0.033 to 0.976 0.01 to 0.03 0.033 to 0.976 0.01 to 0.03 RCWE1206 0.033 to 0.05 0.051 to 0.976 RCWE1210 0.01 to 0.03 0.033 to 0.976 0.01 to 0.03 RCWE2010 0.033 to 0.05 0.051 to 0.976 0.01 to 0.03 RCWE2512 0.033 to 0.05 0.051 to 0.976 6.3 ± 0.2 3.15 ± 0.15 0.6 ± 0.1 5.0 ± 0.2 2.5 ± 0.15 0.6 ± 0.1 3.1 ± 0.2 2.5 ± 0.2 0.6 ± 0.1 3.1 ± 0.15 1.6 ± 0.15 0.6 ± 0.1 L W H T1 T2
RCWE
Vishay Dale
RCWE0603 RCWE0805 RCWE1206 - 55 to + 155 (P x R)1/2 > 75 0.7 > 100 3 > 200 5.5 > 300 > 109 10.5 17.5 26 40.5 > 300 > 300 > 300 RCWE1210 RCWE2010 RCWE2512
0402
24
RCWE0603
0603
0.2
24
RCWE0805
0805
0.25
24
RCWE1206
1206
0.5
24
RCWE1210
1210
1.0
24
RCWE2010
2010
1.0
24
RCWE2512
2512
2.0
24
Notes • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. • Part marking: Reference “Surface Mount Resistor Marking” (document number 20020).
PACKAGING EA = Lead (Pb)-free, tape/reel
Document Number: 20019 1 For technical questions, contact: ff2cresistors@ THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?91000 /