Parker Asun Sealing Company (PASC)
Parker简况派克汉尼汾公司
Parker 简况派克汉尼汾公司派克汉尼汾是全球领先的流体传动与控制元件、系统制造企业。
公司的工程专业知识涵盖了核心的运动和控制技术 — 电动、液压和气动、流体和气体处理、过滤、密封和屏蔽、气候控制、流程控制和航空航天等技术。
派克公司在 49 个国家/地区进行经营活动，并在全球拥有约 58000 名雇员。
派克在 2013 财年的销售额超过 130 亿美元。
全球总部：6035 Parkland BoulevardCleveland, OH 44124电话：216 896 3000股票代码：派克汉尼汾公司的普通股以 PH 代码在纽约证券交易所上市。
更多详情，请访问 “投资人关系”部分。
概览：• 售出 865,000 个产品• 13,000 家分销商/MRO 零售店• 1100 个服务市场• 139 个分部• 341 个制造厂我们的愿景：运动与控制领域 No.1我们的技术：航空航天飞行控制系统及组件、流体传动系统、流体计量输送及雾化设备、燃料系统及组件、液压系统及组件、惰性氮生成系统、气动系统及组件，机轮与制动器。
环境控制产品二氧化碳控制设备、电子控制器、干燥过滤器、手动截止阀、软管和接头、压力调节阀、制冷剂分液器、安全泄压阀、电磁阀、恒温膨胀阀。
电动机械交流/直流变频器与系统；电动执行器、起重机器人及滑片；电动静压执行系统；电动机械作动系统；人机界面；线性电机；步进电机、伺服电机驱动与控制；结构挤压件。
过滤设备分析气体发生器；压缩空气和气体过滤器；条件监控、引擎气体、燃料与油过滤及系统；液压、润滑油与冷却液过滤器；流程、化学品、水和微滤过滤器；氮气、氢气与零级空气发生器。
流体与气体处理产品铜接头和阀门；诊断设备；工业管；PTFE 与 PFA 管、护套及塑料接头；热塑管及卡箍；软管接头和硬管接头；快换接头。
液压设备诊断设备；液压油缸与蓄能器；液压泵与液压马达；液压系统；液压阀与控制器；热塑管及卡箍；软管接头和硬管接头；快换接头。
斯派莎克公司介绍
中国 上海闵行区浦江高科技园区新骏环路800号
2015
Spiraxsarco Group Introduction 斯派莎克集团简介
First for Steam Solution 全球蒸汽行业的首选
Sanders & Rheders Company 1888 1888年 Sanders & Rheders 公司 since 1937 in Cheltenham 1937年起 迁址切尔滕纳姆 since 1959 at London SE 1959年起 在伦敦上市
Suitable solutions 全套的解决方案
Failure diagnose and maintenance 故障诊断与维修保养
Phone technical support 电话技术支持
Solutions 解决方案
For many industries and applications 各行业的多种应用
1995年： Spiraxsarco Engineering China Co.Ltd. built up 斯派莎克工程 1993：Spiraxsarco Singapore settled up （中国）有限公 司正式成立 Shanghai office1993年： 斯派莎克新加坡公司在 上海设立办事处
A set of products or service 一系列产品或者服 务 One simple product 一个简单的产品 Complex customized machine set
复杂的定制机组
Satisfy your business demand
满足您的业务 需求
Solutions 解决方案
Parker TechSeal 分裂公司 产品说明书
Hybrid-Electric Vehicle Batery Seals Extruded and spliced using a hot vulcanization process, Parker battery pack seals provide optimal sealing conditions for large battery enclosures requiring low closure force to minimize deflection of the battery pack case. Battery seals are available in solid and hollow O-ring and various custom profiles.
• Application Engineering support and material development
Typical Applications
• Transmissions and drivelines • Diesel engines • Oil filter and fuel systems • Valve covers • Engine oil pans • Cylinder liners • Hybrid-electric vehicles • Sensors • Steering systems
Parker’s elastomer products are highly engineered and customized to meeting demanding application requirements. The team of Application Engineers at Parker is available to provide design assistance and partner with OEMs to develop materials that meet high performance specifications.
美国巴克莱尼公司产品目录说明书
121Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA10-1515.........1.5" x 1.5" Standard ..............................................1810-1515PKG..1.5" x 1.5" Standard 4 x 8' Pcs.............................1810-1530.........1.5" x 3" Standard .................................................2110-1530PKG..1.5" x 3" Standard 4 x 8' Pcs ................................2110-1543.........1.5" Quarter Round ...............................................2010-1545.........1.5" x 1.5" x 45......................................................2010-1560.........1.5" x 6" Standard .................................................2410-1575.........1.5" x .75"..............................................................2010-1591.........1.5" x 1.5" Mono Slot ............................................1910-1592.........1.5" x 1.5" Bi-Slot Corner......................................1910-1593.........1.5" x 1.5" Tri-Slot .................................................1910-1594.........1.5" x 1.5" Bi-Slot Mid Frame ...............................1910-3030.........3" x 3" Standard ....................................................2310-3030PKG..3" x 3" Standard 2 x 8' Pcs ...................................2310-3092.........1.5" x 3" Tri-Slot Corner ........................................2210-3093.........1.5" x 3" Quad Slot................................................2210-3094.........1.5" x 3" Bi-Slot Mid Frame ..................................2211-1515.........1.5" x 1.5" Heavy...................................................1811-1515PKG..1.5" x 1.5" Heavy 4 x 8' Pcs .................................1811-1530.........1.5" x 3" Heavy......................................................2111-1530PKG..1.5" x 3" Heavy 4 x 8' Pcs ....................................2111-3030.........3" x 3" Heavy .........................................................2312-001............Upper Door Track 40 - Plastic ..............................8312-002............Lower Door Track 40 - Plastic ..............................8312-006............Sliding Door Guide 1", Upper ...............................8312-007............Sliding Door Guide 1", Lower ...............................8312-010............Mesh Clamp Profile, Clr - Max 13.1ft ...................8212-011............Stiffener/ Handle Profile, Clr - Max 9.8ft ..............8212-012............Sliding Door Guide 40 - Upper, Clr - Max 9.8ft....8312-013............Sliding Door Guide 40 - Lower, Clr - Max 9.8ft....8312-018............Panel Extrusion 40, Clr - Max 19.7ft ....................8212-022............Rolling Door Guide Profile, Clr - Max 13.1 ft.......8612-032............32 x 18 Bi-Slot .......................................................2512-090............Cover/Gasket Strip 1", Clear ................................2912-090B .........Cover/Gasket Strip 1", Black ................................2912-090Y .........Cover/Gasket Strip 1", Yellow ..............................2912-095............Aluminium Cover Strip 1"......................................2912-095B .........Aluminium Cover Strip 1", Black ..........................2912-101............Cover/ Gasket Strip 40, Clr - 6.6ft........................2912-1010.........1" x 1" Standard ....................................................1612-1010PKG..1" x 1" Standard 6 x 8' Pcs ...................................1612-101B .........Cover/ Gasket Strip 40, Blk - 6.6ft .......................2912-101Y .........Cover/ Gasket Strip 40, Yellow - 6.6ft..................2912-102............Al Cover Strip 40, Clr - 6.6ft..................................2912-1020.........1" x 2" Standard ....................................................1612-1020PKG..1" x 2" Standard 4 x 8' Pcs ...................................1612-102B .........Al Cover Strip 40, Blk - 6.6 ft. Length ..................2912-1030.........1" x 3" Standard ....................................................1712-105............Clamp Bar Profile ..................................................2712-106............Panel Gasket .........................................................2812-107............Mesh Gasket .........................................................2812-108............Panel Gasket 10 Clear - Max 410 ft.....................2512-109............19" Rack Angle......................................................2612-110............Rack Angle, Blank .................................................2612-111B .........PVC Cover Strip 40, Blk - 6.6ft.............................2912-111BL .......PVC Cover Strip 40, Blue - 6.6ft ..........................2912-112............Safety Cover Strip 40/28, Yellow - Max 9.8ft.......2812-114............Anti-Skid Cover 40, Blk - Max 65.6ft....................2812-2020.........2" x 2" Standard ....................................................1712-400............UHMW Slide Bar 40 max 120"...........................11112-402............Slide Strip 1" max 120".......................................11112-410............Slide Strip 1.5" max 120"....................................11112-420............UHMW Slide Bar 40 x 10 max 120"...................11112-421............UHMW Guide Profile .............................................8613-012............Steel Tube, Plastic Coated for handles(max. 120 in.).....................................................5413-410............Slide Profile 40....................................................11013-430............Slide Profile 40 Side Flange . (110)13-440............Slide Profile 28....................................................11013-450............Slide Profile 28 Side Flange ...............................11013-800............Slide Profile 56....................................................11013-810............Slide Profile 80....................................................11018-1010.........1" x 1" End Cap .....................................................3118-1020.........1" x 2" End Cap .....................................................3118-1030.........1" x 3" End Cap .....................................................3118-1515.........1.5" x 1.5" End Cap...............................................3118-1530.........1.5" x 3" End Cap..................................................3118-1543.........1.5" Quarter Round End Cap................................3118-1545.........1.5" x 1.5" x 45? End Cap.....................................3118-1575.........1.5" x .75" End Cap...............................................3118-2020.........2" x 2" End Cap .....................................................3118-3030.........3" x 3" End Cap .....................................................3118-710............Access Hole Plug ..................................................3118-713............Access Hole Plug - Steel ......................................3118-807............32x18 End Cap......................................................2519-004............Drill & Counterbore for BHCS or SHCS .............11419-006............Drill & Countersink for FHCS ..............................11419-007............Saw Cut for Linear Shaft.....................................11419-009............Tap 5/16-18........................................................11419-026............Panel Packing for Secure Transport ..................11419-029............Panel - Chamfer Corner ......................................11419-030............Panel - Notch Corner ..........................................11419-104............Special Miter Cut .................................................11419-200............Special Invoice Required ....................................11419-201............Assembly Required .............................................11419-202............Assembly Form Follows......................................11419-203............Packaging in Kit Form.........................................11419-204............Kit Form Follows..................................................11419-205............Special Assembly Documents Enclosed............11419-206............Engineering..........................................................11419-207............On-Site Installation..............................................11419-208............Special Packing Slip Required ...........................11419-210............Special Machining ...............................................11419-211............Miter Connection Service....................................11419-300............Inspection/Acceptance/Approval ........................11419-501............Saw Cut up to 3"x1.5".........................................11419-502............Saw Cut up to 3"x3"............................................11419-503............Saw Cut 6"x1.5"...................................................11419-511............Drill .277" Access Hole - Except 6" side ............11419-512............Drill & Tap (10/32",1/4",5/16", 3/8")....................11419-514............Drill & Tap (1/2" or 5/8" up to 1.5" Deep)...........11419-515............Step Drill for Universal Fastener 1.5" or 1"........11419-516............Drill/ Tap 5/16x1.5" for 5/16"Foot .......................11419-517............Drill/ Tap 3/8"x 2" for 3/8" Foot...........................11419-520............Step Bore for Pneum. Univ. Fastener(3/4" x 1/4")......................................................11419-525............Drill .277" Access Hole thru 6" side ...................11419-527............Panel - Thru Hole up to 3/8"l Profile Square 3"x1.5"l Profile Square 3"x3"l Profile Square 6"x1.5"..................................11419-603............Drill/ Tap/ Mill for Roller PA ................................11419-605............45° Miter Cut, up to 3x3" profile .........................11419-606............45° Miter Cut, 6"x1.5" profile ..............................11420-059............T-Slot Profile 1.5"..................................................3620-062............Heavy T-Slot Bar - 1.5".........................................3620-082............Economy T-Slot Nut, 1.5" - 5/16-18.....................3520-082SS.......Economy T-Slot Nut, 1.5" - 5/16-18,Stainless Steel ...................................................3520-083............Economy T-Slot Nut, 1.5" - 1/4-20.......................3520-088............Economy T-Slot Nut, #10-32...............................3520-093SS.......Economy T-Slot Nut 28, 1/4-20 Stainless Steel .......20-1010.........Cast Gusset 1"......................................................4520-1010C.......Cap for Cast Gusset 1".........................................4520-102z4........Gusset Profile ........................................................2720-182............Economy Offset T-Slot Nut, 1.5" - 5/16-18. (35)122Parker Hannifin CorporationIndustrial Profile Systems Business Unit Wadsworth, Ohio USA20-193............Economy Offset T-Slot Nut 1.5" - 1/4-20.............3520-200............Retainer for Wire mesh 1"Single ..........................8120-201............Retainer for Wire mesh 1" Double........................8120-202............Retainer for Wire mesh 1.5" Single ......................8120-203............Retainer for Wire mesh 1.5" Double.....................8120-300............Joining Plate, 1.5" x 3"..........................................4820-301............Joining Plate, 1.5" x 6"..........................................4820-302............Joining Plate, 3" x 3".............................................4820-303............Joining Plate, 3" x 6".............................................4820-304............Joining Plate, Corner 4.5" x 4.5"..........................4920-305............Joining Plate, T , 4.5" x 4.5".................................4920-306............Joining Plate, Corner 6" x 6"................................4920-307............Joining Plate, T , 6" x 6".......................................4920-310............Joining Plate, 1" x 2".............................................5020-311............Joining Plate, 1" x 4".............................................5020-312............Joining Plate, 2" x 2".............................................5020-313............Joining Plate, 2" x 4".............................................5020-314............Joining Plate, Corner 3" x 3".................................5120-315............Joining Plate, T , 3" x 3".......................................5120-330............Connection Element, 90 1.5" x 1.5" x 1.5"...........4220-335............Connection Element, 90 1" x 1" x 1"....................4320-336............Connection Element, 90 1" x 1" x 2"....................4320-337............Connection Element, 90 1.5" x 1.5" x 3"..............4220-338............Connection Element, 90 1.5" x 3" x 3".................4220-4040.........1 x 1 Single Gusset (die cast)..............................4520-440............Gusset Bracket, 3" x 3" x 1.5"..............................4420-441............Gusset Bracket, 3" x 3" x 3".................................4420-442............Gusset Bracket, 3" x 3" x 1".................................4420-500............Corner Element 1, 1.5"..........................................4620-501............Corner Element 1, 3".............................................4620-502............Corner Element 2, 1.5"..........................................4620-503............Corner Element 2, 3".............................................4620-504............Corner Element 3, 1.5"..........................................4620-505............Corner Element 3, 3".............................................4620-506............Machined Gusset 1" x 1"......................................4720-507............Machined Gusset 1" x 2"......................................4720-508............Machined Gusset 1.5" x 1.5"................................4720-509............Machined Gusset 1.5" x 3"...................................4720-8040.........2 x 2 Single Gusset (die cast)..............................4521-020............Rubber Insert 80....................................................9221-021............Clamping Shoe 80.................................................9221-032............Floor Fastening Set...............................................9221-057z4........L-Bracket Profile....................................................2721-060............L Base Floor Anchor 1.5"......................................9321-061............L Base Floor Anchor 1".........................................9321-073............UHMW Guide Insert Set - 1/4-20..........................8621-075............Roller Insert Set.....................................................8621-1020-04....Base Plate, 1" x 2", 1/4-20..................................10121-1020-05....Base Plate, 1" x 2", 5/16-18................................10121-1030-04....Base Plate, 1" x 3", 1/4-20..................................10121-1030-05....Base Plate, 1" x 3", 5/16-18................................10121-1530-06....Base Plate, 1.5" x 3", 3/8-16..............................10121-1530-08....Base Plate, 1.5" x 3", 1/2-13..............................10121-1530-10....Base Plate, 1.5" x 3", 5/8-11..............................10121-2020-05....Base Plate, 2" x 2", 5/16-18................................10121-2020-06....Base Plate, 2" x 2", 3/8-16..................................10121-2020-08....Base Plate, 2" x 2", 1/2-13..................................10121-250............Flange Foot 1.5" x 1.5".........................................9521-252............Flange Foot 1" x 1"................................................9521-255............Flange Foot 1.5" x 3.0".........................................9521-256............Flange Foot 3.0" x 3.0".........................................9521-300............Caster Swivel 2" - Hollow King Pin.......................9621-301............Caster Swivel 2", Locking - Hollow King Pin........9621-302............Caster Rigid 3" - Top Plate ...................................9721-303............Caster Swivel 3" - Top Plate.................................9721-3030-06....Base Plate, 3" x 3", 3/8-16..................................10121-3030-08....Base Plate, 3" x 3", 1/2-13..................................10121-3030-10....Base Plate, 3" x 3", 5/8-11. (101)21-304............Caster Swivel 3", Locking - Top Plate..................9721-305............Caster Swivel 3" - 7/16 Grip Ring.........................9621-306............Caster Swivel 3", Locking - 7/16 Grip Ring..........9621-309............Caster Swivel 3" - Hollow King Pin.......................9621-310............Caster Swivel 3", Locking - Hollow King Pin........9621-311............Caster Rigid 5" - Top Plate ...................................9721-312............Caster Swivel 5" - Top Plate.................................9721-313............Caster Swivel 5", Locking - Top Plate..................9721-316............Caster Swivel 5" - Plate 550lbs ..........................10021-317............Caster Swivel 5", Locking - Plate 550lbs ...........10021-318............Caster Swivel 5" - Plate 900lbs ..........................10021-319............Caster Swivel 5", Locking - Plate 900lbs ...........10021-320............Standard Duty 1-5/8" - 7/16 Grip Ring .................9621-323............Leveling Caster 1"- Threaded Stud M12..............9921-324............Leveling Caster 1" - Plate Mount.........................9921-325............Floor Lock - Plate Mount.....................................10021-327............Leveling Caster 1.5"- Threaded Stud M12...........9921-328............Leveling Caster 1.5"- Plate Mount.......................9921-330............Socket for 1.5" x 3" Heavy....................................9621-331............Socket for 1.5" x 3" Standard ...............................9621-332............Corner Bracket for Standard Duty Casters ..........9621-333............Straight Bracket for Standard Duty Casters ........9621-336............Caster Swivel 3" - 1/2" Stem ................................9721-337............Caster Swivel 3" - Locking - 1/2" Stem ................9721-338............Caster Swivel 5" - 1/2" Stem ................................9721-339............Caster Swivel 5"- Locking - 1/2" Stem .................9721-340............Furniture 2" - 5/16 Grip Ring.................................9821-341............Furniture 2" - 5/16 Grip Ring-Locking ..................9821-342............Institutional Twin Wheel ........................................9821-343............Institutional Twin Wheel Locking ..........................9821-344............Dual Wheel 3" - 1/2" Stem ....................................9821-401............Knuckle Foot 1.5", 5/16-18 x 2"............................9021-402............Knuckle Foot 1.5", 5/16-18 x 3"............................9021-403............Knuckle Foot 1.5", 3/8-16 x 3"..............................9021-404............Knuckle Foot 3", 1/2-13 x 4".................................9021-405............Knuckle Foot 3", 1/2-13 x 6".................................9021-406............Knuckle Foot 3", 5/8-11 x 4".................................9021-407............Knuckle Foot 3", 5/8-11 x 6".................................9021-409............Corner Mounting Plate ..........................................9221-410............Knuckle Foot 1" Delrin, 1/4-20 x 2"......................8921-411............Knuckle Foot 1" Delrin, 3/8-16 x 3"......................8921-412............Knuckle Foot 1" Steel, 1/4-20 X 2".......................8921-413............Knuckle Foot 1" Steel, 3/8-16 X 3".......................8921-414............Knuckle Foot 1" Steel, 1/2-13 x 3".......................8921-415............L-Base Leveling Foot 1.5".....................................9321-416............L-Base Leveling Foot 1"........................................9321-420............Leveling Foot 3, Bolt Down, 1/2-13......................9121-421............Leveling Foot 3, Bolt Down, 5/8-11......................9121-422............Anti-Vibration Leveler 1/2-13, Light......................9121-423............Anti-Vibration Leveler 1/2-13, Medium.................9121-424............Anti-Vibration Leveler 1/2-13, Heavy ...................9121-440............Floor Mounting Bracket 1.5".................................9421-441............Floor Mounting Bracket 3"....................................9421-442............Floor Mounting Bracket 1"....................................9421-443............Floor Mounting Bracket 2"....................................9421-500............Adapter Plate 1.5".................................................9921-501............Adapter Plate 1.0".................................................9921-502............Adapter Plate 1.5".................................................9921-504............Base Plate for heavy Casters.............................10022-111............Economy Mesh Clamp 1.5"..................................8122-115............Multiblock 1.5" - 1/4-20.........................................8022-116............Multiblock 1" - 1/4-20............................................8022-153............Corner Bracket 1.5"...............................................4122-154............Connector Cap 1.5" Radius ..................................4122-155............Connector Cap 45 Degree ....................................4122-202............Cable Tie Holder....................................................8722-204............T-Clip 5/32-1/4 w/Fast Kit .....................................8722-206............T-Clip 1/4-5/16 w/Fast Kit . (87)123Parker Hannifin CorporationIndustrial Profile Systems Business UnitWadsworth, Ohio USA22-209z1........T-Clip 5/16-3/8 w/Fast Kit .....................................8722-211z1........T-Clip 3/8-1/2 w/Fast Kit .......................................8722-213z1........T-Clip 1/2-5/8 w/Fast Kit .......................................8722-216z1........T-Clip 5/8-3/4 w/Fast Kit .......................................8722-219z1........T-Clip 3/4-7/8 w/Fast Kit .......................................8722-223z1........T-Clip 7/8-1 w/Fast Kit ..........................................8722-230............Cable Hose Holder w/ English Fast Kit ................8723-030............Light Duty Aluminium Handle ...............................5323-031............Handle PA 132......................................................5423-032Z1.......Handle PA 179......................................................5423-033............Handle PA 93.5.....................................................5423-038............L-Handle Locking...................................................5523-038z1........Backing Plate.........................................................5723-039............L-Handle Non-locking............................................5523-046............Magnetic Catch......................................................6023-051............Strike Plate for Magnetic Catch............................6023-058............Mini-Key Safety Switch - Straight Key .................7023-059............Mini-Key Safety Switch - Angle Key.....................7023-060............Safety Switch 1 (1 NC + 1 NO).............................7223-061............Safety Switch 1 (2 NC)..........................................7223-062............Safety Switch 2 (1 NC + 1 NO).............................7323-063............Safety Switch 2 (2 NC + 2 NO).............................7323-064............Safety Switch 3 (2 NC) - To Lock.........................7423-066............Safety Switch 3 (2 NC) - To Unlock .....................7423-070............Open Angled Handle .............................................5323-071............Closed Angled Handle ..........................................5323-072............Tube Handle Ends.................................................5423-073............Tube Handle Center Supports ..............................5423-102............Mini-Key Mounting Bracket...................................7023-104............Safety Switch Mounting Bracket 1.......................7223-108............Mini Key Mounting Bracket - Top .........................7123-109............Mini Key Mounting Bracket - Sliding ....................7123-110............Safety Switch Mounting Bracket 3.......................7423-119............Mounting Bracket for Magnetic Catch..................6023-120............Ball Catch Bracket Style 1....................................5823-121............Ball Catch ..............................................................5823-122............Magnetic Catch Bracket........................................6023-124............Door Stop 1"..........................................................6323-125............Door Stop 1.5" - Straight.......................................6323-126............Door Stop 1.5" - Angle ..........................................6323-127............Ball Catch Bracket Style 2....................................5823-128............Ball Plunger, 3/8" Dia x .786"...............................5923-129............Ball Plunger, 1/2" x 1.10"......................................5923-130............Rachet Lock (for panel sliding doors)..................6323-133............Quarter Turn Latch T-Handle Non-Locking..........5523-134............Quarter Turn Latch Wing Knob Locking...............5523-135............Quarter Turn Latch - Square Insert ......................5523-137............Ball Catch Bracket 1"............................................5923-140z1........Spare Key for 23-134/23-144...............................5723-140z2........Square Key for 23-135/23-145.............................5723-140z4........Cam 45-2 Offset ....................................................5723-140z5........Cam 35-10 Offset ..................................................5723-140z7........Keeper Bracket......................................................5723-140z8........Cam 45-8...............................................................5723-142z1........Hooked Cam..........................................................5723-143............Quarter Turn Latch T-Handle Non-Locking Panel 5623-144............Quarter Turn Latch Wing Knob Locking Panel ....5623-145............Quarter Turn Latch - Square Insert Panel ...........5623-155............Slam Latch - Keyed...............................................6223-156............Slam Latch - Non Locking.....................................6223-158............Velcro Plate ...........................................................6323-159............Internal Handle for Quarter Turn Handles............5623-160............Deadbolt Latch ......................................................6223-210............Grabber Door Catch ..............................................6123-211............Grabber Door Catch w/Micro-Switch..................6123-212............Grabber Door Catch Bracket 90 degree ..............6123-213............Grabber Door Catch Bracket Flat.........................6123-220............Adjustable Hinge 1................................................6823-222............Adjustable Hinge 2................................................6823-224............Positioning Hinge 85°............................................6823-226............Positioning Hinge 120°..........................................6823-228............Positioning Hinge 155°..........................................6823-250............Hinge 1" - Steel .....................................................6623-250L .........Hinge 1" - Steel Left ..............................................6623-250R.........Hinge 1" - Steel Right............................................6623-251............Hinge 1"/1.5" - Steel..............................................6623-251L .........Hinge 1"/1.5" - Steel Left ......................................6623-251R.........Hinge 1"/1.5" - Steel Right ....................................6623-252............Hinge 1.5" - Steel ..................................................6623-252L .........Hinge 1.5" - Steel Left ...........................................6623-252R.........Hinge 1.5" - Steel Right ........................................6623-260............Pivot Joint 1", Blk ..................................................6923-261............Pivot Joint 1", Blk - Locking..................................6923-262............Pivot Joint 1.5", Blk ...............................................6923-263............Pivot Joint 1.5", Blk - Locking...............................6923-550............Plastic Hinge 1".....................................................6723-550L .........Plastic Hinge 1" - Left ...........................................6723-550R.........Plastic Hinge 1" - Right .........................................6723-551............Plastic Hinge 1.5"..................................................6723-551L .........Plastic Hinge 1.5" - Left ........................................6723-551R.........Plastic Hinge 1.5" - Right......................................6723-552............Plastic Hinge 1/1.5"...............................................6723-552L .........Plastic Hinge 1/1.5" - Left .....................................6723-552R.........Plastic Hinge 1/1.5" - Right...................................6723-620............Aluminum Hinge 1.5" - Right Long .......................6423-621............Aluminum Hinge 1.5" - Left Long..........................6423-622............Aluminum Hinge 1.5" - Right Short ......................6423-623............Aluminum Hinge 1.5" - Left Short .........................6423-624............Aluminum Hinge 1.5" - Receiver ..........................6423-625............Aluminum Hinge 1.5" - Double Pin .......................6423-626............Aluminum Lift off Hinge 1.5" - Heavy Duty ..........6523-626L .........Aluminum Lift off Hinge 1.5" - Left .......................6523-626R.........Aluminum Lift off Hinge 1.5" - Right .....................6523-630............Aluminum Hinge 1" - Right Long ..........................6423-631............Aluminum Hinge 1" - Left Long.............................6423-632............Aluminum Hinge 1" - Right Short..........................6423-633............Aluminum Hinge 1" - Left Short ............................6423-634............Aluminum Hinge 1" - Receiver..............................6423-635............Aluminum Hinge 1" - Double Pin ..........................6423-636............Aluminum Lift off Hinge 1" - Heavy Duty..............6523-636L .........Aluminum Lift off Hinge 1" - Left...........................6523-636R.........Aluminum Lift off Hinge 1" - Right ........................6523-640............Aluminum Lift off Hinge 1"/1.5" - Heavy Duty......6523-640L .........Aluminum Lift off Hinge 1"/1.5" - Left ...................6523-640R.........Aluminum Lift off Hinge 1"/1.5" - pression Springfor Economy T-Nuts, 1/pression Springfor Economy T-Nuts, 5/16-18...........................3525-001............T-Slot Nut 40 Steel 1/4-20....................................3425-002............T-Slot Nut, 1.5" - 5/16-18......................................3425-002SS.......T-Slot Nut, 1.5" - 5/16-18, Stainless Steel...........3425-003............Standard Fastener 5/16-18...................................3225-003SS.......Standard Fastener 5/16-18, Stainless Steel........3225-004............Universal Fastener 5/16-18..................................3325-005............Drop In T-Nut 10-32...................................................25-006............Drop in T-Nut 1/4-20", Rubber post...........................25-007............Drop in T-Nut 5/16-18", Rubber post.........................25-008............Drop-in T-Nut, 1/4-20, 28/56......................................25-009............T-Slot Nut, 1.5" *- #10-32......................................3425-014............Single Ear Standard Fastener 1.5" - 5/16-18.......3225-015............Profile to Wall Universal Fastener 5/16-18..........3325-016............Butt Fastener Assembly 5/16-18..........................3325-017............Butt Fastener Assembly 1/4-20............................3325-022............Standard Fastener, 1/4-20....................................3225-022z1........Standard Fastener, 1/4-20 - Clip .. (32)。
Parker Hannifin Corporation Sporlan Division - P-S
Parker Hannifin CorporationSporlan Division - Refrigeration Business Unit 2445 South 25th AvenueBroadview, IL 60155-3891 USA Phone: (708) 681-6300Fax: (708) 681-6306ISO 9001 CERTIFIED1234112341234X4X4X4Discard5OperationPrior to installing the P-Series Electronic Valve (PEV) the included safety bulletins must be read and understood.ENGLISHRefrigerantsSuitable for ammonia, CO 2, and other common refrigerantsLiquid Temperature Range -60ºC to 120ºC (-76ºF to 248ºF)Ambient Temperature Range -40ºC to 50ºC (-40ºF to 122ºF)Maximum Rated Pressure (MRP)52 barg (754 psig)Maximum Operating Pressure Differential (MOPD)Figure 1: Components 1 - Port Plate Assembly 2 - Bolts, Port Plate 3 - Valve Body4 - Gasket, Port Plate (New)PortBolt Size Nm Ft Lb 20 mm (3⁄4”) to 25 mm (1”)M12 x 1.75614532 mm (11⁄4”) to 40 mm (11⁄2”)M16 x 2149110Figure 5: Re-Assembly1 - Gasket, Port Plate (New)InstallationAll personnel working on valves must be qualified to work on refrigeration systems. If there are any questions contact Sporlan Division - Refrigeration Business Unit before proceeding with the work.All valves are packed for a maximum protection. Unpack carefully. Check the carton to make sure all items are unpacked, see Figure 1 for the list of items included. Do not remove the protective coverings from the inlet and outlet of the valve until the valve is ready to be installed. Protect the inside of the valve from dirt and chips before and during installation. In the event the valve is left disassembled for any length of time, protecting the components is essential. Place the components in a plastic bag and store them in an area where they will not be damaged.The valve should be installed in a location where it is easily accessible foradjustment and maintenance. The location should be such that the body cannot be easily damaged by material handing equipment. Proper indicating gauges should be installed to be easily visible to the operating engineer for system checks and adjustment purposes.The valve should be disassembled before welding to prevent damage to o-rings and teflon (PTFE) components. First remove the port plate by unbolting the bolts as shown in Figure 2. If the port plate does not come apart easily, rotate the port plate 45º and use the corners to pry the port plate out. If using a tool, such as a screw driver, it is important to be careful not to damage any gasket surfaces.The current port plate gasket must be removed, as shown in Figure 3, anddiscarded. A replacement gasket is provided with every purchase of a new valve.The PEV valves must be mounted in the upright horizontal position with the actuator on the top. The valve must be installed with the arrow pointing in the direction of flow for the valve to function properly.Installers need to follow a WPS (Welding Procedure Specification) for all welding. The procedure and welder doing the weld must be qualified to perform that procedure.The codes applicable to the welding of socket weld valves require that the pipe be inserted into the socket until bottomed against the stop, then backed out approximately 1⁄16 of an inch (1.6 mm) before welding. Use of welding rings isoptional but recommended for butt weld valves. They help alignment, control gap for full penetration welding, and reduce welding debris entry.Figure 6: Port Plate Torque SpecsPort MOPD 20 mm (3⁄4”) to 25 mm (1”)52 bard (754 psid)32 mm (11⁄4”) to 40 mm (11⁄2”)28 bard (406 psid)Connection TypesSW, BW ANSI, and BW Metric (DN)P/N 313906RSD B Date: 11-20 ECO: 0345229Parker Electronic Valve (PEV)Installation InformationWARNING – USER RESPONSIBILITY。
帕克霍夫尼因公司工业胶管产品说明书
2Parker Hannifin CorporationIndustrial Hose Products LENGTHS: 100 ft., lengths up to 200 ft. available on quotation.COUPLINGS: For permanent crimp specifications, refer to CrimpSource. Other available coupling options: Series 7670. For assembly guidelines and additional coupling options, refer to NAHAD Industrial Hose Assembly Guidelines.WARNING! Combination nipple and bands reduce the workingpressure of the assembly to less than the hose’s maximum working pressure. Refer to NAHAD Assembly Guidelines for working pressure.!Compatible with 96% of chemicals and solvents >>Applications• Chemical Transport• Storage Tank T ransfer POLY-CHEM ®Corrugated Hose Series 7274The Poly-Chem hose is designed to handle many types of chemicals and solvents in both full suction and discharge applications. This series has a corrugated cover that provides maximum flexibility for easy handling. The clear cross-linked polyeth-ylene tube will handle many types of chemicals, acids and solvents without leaching and contaminating the product conveyed. Refer to the chemical guide in the Safety and T echnical Data section of this catalog, or contact Parker to determine compatibility with specific chemicals and applications. Validated permanent crimp specs are available.4:1 Design factorWARNING! Elevated temperatures can change chemical resistance rat-ings. Most chemical resistance guides are based on testing performed at ambient 70°F (21°C) and higher temperatures are likely to change these ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of materials to withstand them. It is the users responsibility to determine if the hose is compatible with the application. Compatibility information can be requested from Parker for chemicals at elevated temperatures, it will be necessary for users to perform compati-bility testing if no data exists for the chemical at the temperature desired. 。
Parker Pen Company (派克公司介绍)中英文对照
Parker Pen CompanyOver A Century of Success派克制笔公司一个多世纪的成功Making a better pen was what the Parker Pen Company's founder, George Safford Parker, set out to do when he couldn't find one that wrote well and didn't leak. Parker believed that if he "made a better pen, people would buy it." And so he did.做好笔，是派克公司创始人George Safford Parker确定的目标，当时他无法买到好写而又不漏水的钢笔，他相信:“如果自己可以做出好笔，就一定有人买”。
他做到了这些。
George Safford Parker did not start out a maker of pens. Instead, he beganhis career as a teacher of telegraphy. To supplement his teaching income,Parker started selling pens for the John Holland Pens Company. In fact, histelegraphy students were his main customers.Parker起初并不是制笔商，他最初的职业是电信教师。
为了贴补他的收入，Parker开始代销John Holland制笔公司的钢笔。
事实上，他的学生是他的主要顾客。
When the pens he sold malfunctioned, Parker felt obligated to fix them.Soon overwhelmed with repair work, he decided to invent his own versionof the fountain pen. Thus, Parker's famous idea of "making a better pen"came to life. With that, the Parker Pen Company was born. It was 1888 inJanesville, Wisconsin, USA.当他卖出的钢笔不能书写时，他认为自己有义务把这些钢笔修好。
东洋莎克赛思（香港）有限公司深圳代表处介绍企业发展分析报告
Enterprise Development专业品质权威Analysis Report企业发展分析报告东洋莎克赛思（香港）有限公司深圳代表处免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:东洋莎克赛思（香港）有限公司深圳代表处1企业发展分析结果1.1 企业发展指数得分企业发展指数得分东洋莎克赛思（香港）有限公司深圳代表处综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。
该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。
1.2 企业画像类别内容行业广播、电视、电影和影视录音制作业-出版业资质空产品服务事金属材料贸易业务的联络活动，不得直接从1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.4行政处罚-工商局4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.11产品抽查-工商局4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。
斯必克公司亚太区斯必克公司亚太区斯必克公司亚太区斯必克公司亚太区
斯必克公司亚太区斯必克公司概况•全球性多元化工业产品制造领导者•1912年创建,总部位于美国北卡罗莱纳州的夏洛特市•位列财富500强•全球有17000多名员工,业务遍布35个国家和地区•股票在纽约证券交易所上市,交易代码SPW•2008年总收入超过五十八亿美金财富》》2008“最受尊崇企业”榜电•位列位列《《财富子工业组第五四大业务部门斯必克工艺设备及技术安培威流体加工设备及技术斯必克流体控制技术斯必克干燥及过滤技术斯必克汽车服务方案英国雷迪GFI公共交通智能收费系统斯必克冷却技术巴克杜尔热交换与排放控制技术马利暖通技术斯必克液压技术热能解决方案沃基沙高压输变电技术斯必克费尔特兰过滤技术斯必克精密部件加工技术广播通信技术航空障碍探照监测技术业界知名品牌热力产品与服务•斯必克冷却技术…为发电、工业、制冷和采暖通风空调行业提供卓越的全系列、全服务的冷却塔和空冷冷宁产品。
斯必克冷却技术由巴克杜尔、马利和哈蒙空气冷却公司组成，是世界上研发创新冷却系统的领导者之一。
•巴克杜尔热交换与排放控制技术…为满足常规电站，联合再循环电站，核电站，垃圾焚烧发电电站，以及化工、石化、处理工业的需要，提供热交换器、排放控制设备及相应的服务。
凭借其脱硝技术和专利的三角翼产品，巴克杜尔被赞誉为“高性能脱硝技术产品的设计师”。
•马利暖通技术…具备近百年的行业经验，专业从事制热电器、空气对流产品的设计开发、生产制造及销售。
在住宅、商用和工业应用市场中是世界领先的通风和住宅建设产品的制造商，产品在北美市场占有最高的市场份额。
流体技术•斯必克工艺设备及技术…作为流体设备行业的制造领导者，提供流体工艺解决方案，计量和混合系统，各类泵，阀，搅拌器，管件以及其他各种高度专业化的工程过程组件。
•斯必克干燥及过滤技术…提供去除空气、气体、燃料、润滑油和绝缘液体中湿气和杂质的过滤产品和系统。
•安培威流体加工设备及技术…为食品、乳品、饮料和制药工业的客户提供创新产品、加工工艺解决方案和服务支持，主要产品包括泵、阀、均质机以及换热器。
Parker Hannifin 公司 Engineered Polymer Systems 部门 B
5Click to Go to SECTIONTable of ContentsClick to Go to Table of Contents BD Profile, Premium O-ring Energized Lip Seal With Back-up RingFor enhanced extrusion protection, Parker offers the BD profile with a positively actuated back-up ring located in the heel. See part number nomenclature for designating this option.The BD profile is a non-symmetrical profile rod seal. Its rectangular shaped cross section ensures stability in the gland. The o-ringenergizer functions as a spring to maintain sealing contact under low pressure or vacuum applications. The knife trimmed, beveled lip does an excellent job wiping fluid film. A stabilizing lip is located below the primary sealing lip, just above the base of the seal, to provide enhanced sealing performance and ensure a tight, stable fit in the gland. Available in Parker’s proprietary urethanes, the BD profile provides long life, extrusion resistance, low compression set, shock load resistance and increased sealing performance at zero pressure. The BD profile isdesigned to be used as a stand alone rod seal or for use with the BR or OD profile buffer seal for more critical sealing applications.Catalog EPS 5370/USARod SealBD Profile Preferred ProfileBD Cross-Sectionwith Back-upTechnical DataStandard Temperature Pressure Surface Materials Range Range* Speed P5065A88 -70°F to +200°F 3500 psi < 1.6 ft/s (-57°C to +93°C) (241 bar) (0.5 m/s)Back-up W4655-65°F to +250°F10,000 psi < 1.6 ft/s (-54°C to +93°C)(688 bar) (0.5 m/s)Alternate Materials: For applications that may require an alternate material, please go to /eps/FluidPower to checkcurrent tooling and part number availability, or contact your local Parker representative.*Pressure Range without wear rings. If used with wear rings, see Table 2-4, page 2-5.5Gland Dimensions — BD ProfilePart Number Nomenclature — BD Profile (5065, with Back-up)Table 5-5. BD Profile4-Digit Material Code Example:Example: .375 x 1000 = 375Table 5-6. BD Profile — Rod Gland Calculation*If used with wear rings, refer to wear ring throat diameter, see Section 9. For custom groove calculations, see Appendix C .Above table reflects recommended cross-sections for rod diameters shown. Alternate cross-sections and additional sizes may be considered. Consult /eps/FluidPower for additional cross-sections and sizes, hardware specifications, and part number availability. Contact your Parker representative for assistance.Please refer to Engineering Section 2, page 2-8 for surface finish and additional hardware considerations.5Click to Go to CATALOG Table of ContentsAbove table reflects recommended cross-sections for rod diameters shown. Alternate cross-sections and additional sizes may be considered. Consult /eps/FluidPower for additional cross-sections and sizes, hardware specifications, and part number availability. Contact your Parker representative for assistance.Table 5-7. BD Profile — Rod Gland Dimensions , ·Parker Standard SizesTable 5-7. BD Profile — Rod Gland Dimensions, ·Parker Standard Sizes (cont'd)5。
Parker Hannifin 公司胶带和气垫类型蓄力器目录说明书
Accumulator Sizing For:•Shock Suppression •Thermal Expansion •Pulsation Dampening •Auxiliary Power SourceSizing and Selection•Piston Accumulators •Bladder Accumulators •KleenVentSizing and Selection SoftwareParker offers leading edge application assistance, in the form of the Accumulator Sizing and Selection Software (see page 16).For manual sizing calculations, see below and on the following pages.For further engineering assistance, contact Parker’s Accumulator T echnical Support Group at (815) 636-4100.Where:P 2=Maximum operating pressure in PSIA P 3=Minimum operating pressure in PSIA P 1=Pre-charge pressure required in PSIAV W =Volume of fluid collected or discharged by accumulator, In 3V 1=Required Accumulator volume, In 3f = Nitrogen gas constant-charging of Accumulators (see charts on pages 134-135)n = Nitrogen gas constant-discharging of Accumulators (see charts on pages 134-135)Note:Gas Precharge usually 100 psi below minimum pressure for Piston Accumulators*.Gas precharge is 90% of minimum pressure for Bladder Accumulators .*90% where minimum system pressure is less than 1000 psi.Calculations for accumulator sizing take into consideration the charge and discharge rate of the accumulator.Auxiliary Power SourceAccumulator Sizing for:•Shock Suppression •Thermal Expansion •Pulsation Dampening •Auxiliary Power SourceV =1V wP P 311f /0.95 1 –P P 321n/Hydraulic line shock suppressionThermal ExpansionWhere:α=Coefficient of Linear Expansion of Pipe Material per °F β=Coefficient of Cubical Expansion of Fluid per °F n =Discharge Coefficient (see charts on pages 134-135)P 1=PrechargeP 2=Minimum System Pressure @ T 1 (PSIA)P 3=Maximum System Pressure @ T 2 (PSIA)V 1=Accumulator SizeV a =Fluid Volume Subject to Thermal Expansion T 1=Initial Temperature (Lower Temp °Kelvin)T 2=Final Temperature (Higher Temp °Kelvin)Where:W =weight of fluid (lbs)V =fluid velocity (ft/sec)n = Discharge coefficient (see charts on pages 134-135)P 2=system pressure P m =Shock pressureV 1=accumulator size required P 1=pre-charge pressure G =force of gravity Q=flow rate in GPM()()V 1=−−−V T T P P P P a nn2121231131βαV =1P P 211n /2 (g) (P )2P P m 2(n-1)n/(12W) (V ) (n-1)2+ (Q1.155)*– 1Coefficient of Linear Expansion of Pipe Material per °F Steel: 6.33 x 10-6Cast Iron: 6.55 x 10-6Aluminum:10 x 10-6Coefficient of Cubical Expansion of Fluid per °F Water: 1.15 x 10-4Oil:4.60 x 10-4Piston pump pulsation dampeningWhere:K =Pump output coefficient n = Coefficient of discharge (see charts on pages 134-135)P 1=Nitrogen gas pre-charge P 2=System operating pressureP 3=Maximum allowable shock pressure A =Piston area L =Piston strokeV 1=Accumulator size requiredExisting accumulator output used in an auxiliary power source application.Calculations for accumulator sizing takes into consideration the charge and discharge rate of the accumulator.Pump output coefficient is calculated depending on single acting or double acting pump:Simplex single .60Simplex double .25Duplex single .25Duplex double .15T riplex single .13T riplex double .06Quadruplex single .10Quadruplex double .06Quintiplex single .06Quintiplex double.02V =1ALK P P 211 –P P 231n /1n/Where:P 2=Maximum operating pressure in PSIA P 3=Minimum operating pressure in PSIA P 1=Pre-charge pressure required in PSIAV W =Volume of fluid collected or discharged by accumulator, In 3V 1=Required Accumulator volume, In 3f = Nitrogen gas constant-charging of Accumulators (see charts on pages 134-135)n = Nitrogen gas constant-discharging of Accumulators (see charts on pages 134-135)Note:Gas Precharge usually 100 psi below minimum pressure for Piston Accumulators .Gas precharge is 90% of minimum pressure for Bladder Accumulators .V =w P P 311f /1 –P P 321n /0.95V 1Temperature VariationT emperature variation can seriously affect the precharge pressure of an accumulator. As the temperature in-creases, the precharge pressure increases; conversely, decreasing temperature will decrease the precharge pressure. In order to assure the accuracy of your accumulator precharge pressure, you need to factor in the temperature variation. The temperature variation factor is determined by the temperature encountered during precharge versus the operating temperature expected in the system.Temperature During PrechargeLet’s assume the temperature during precharge is 70°F, the expected operating temperature is 130°F, and your desired precharge is 1000 psi. Find the charging temperature of 70°F in the top horizontal row. Next, find the operating temperature of 130°F in the left hand, vertical column. Extend lines from each value until they intersect to find the temperature variation factor; in this case, 0.90. Multiply the desired precharge of 1000 psi by the temperature variation factor of 0.90 to obtain the actual precharge pressure required – 900 psi.Selection Chart for Charge Coefficient “f”& Discharge Coefficient “n” Chart No. 10 - 8 Seconds9 - 30 SecondsPressure (PSI)Pressure (PSI)61 - 120 Seconds31 - 60 Seconds Pressure (PSI)Pressure (PSI)n & fn & fSelection Chart for Charge Coefficient “f”& Discharge Coefficient “n” Chart No. 1Instructions for selection ofCharge Coefficient “f” & Discharge Coefficient “n”1.Determine Average System Pressure.2.Determine the time required in seconds to charge the accumulator with fluid.3.Determine the time in seconds to discharge the oil from the accumulator.4.Select the graph which corresponds to the time (seconds) required to charge (discharge) the accumulator with fluid .5.Select the curve on the graph which corresponds to the gas operating temperature. (If gas tempera-ture under operating conditions is not known,assume 100°F .)6.To use the graph, locate the average system pressure along the bottom portion of the graph.Move vertically along this column until you inter-sect the line corresponding to the gas temperature.Then move horizontally along this line, read the charge coefficient “f” on the left side of the graph.“f” = Charge Coefficient.7.Repeat for the discharge coefficient “n” starting with Step #4.“n” = Discharge Coefficient.121-500 Seconds501-900 SecondsPressure (PSI)Pressure (PSI)n & f*Safety Note:In any accumulator circuit, a means should be available Array of automatically unloading the accumulator when the machine is shut down. Such a valve could be located at this point in the circuit.Control of Usable VolumeThe usable volume of an accumulator should be discharged at a controlled rate. If an accumulator is required to maintain system pressure, this controlled rate is automatically achieved by the leakage fluid it has to replace. However, an accumulator which is used to develop a pressurized flow can discharge its usable volume too rapidly as a downstream directional valve is shifted. For this reason, accumulators in this application are often equipped with a flow control and bypass check at their inlet-outlet port.Pump Unloading inAccumulator CircuitsT o keep a pump/electric motor fully unloaded until it is required to re-charge an accumulator, an electric pressure switch can be used.In the circuit illustrated, a pressure switch senses accumulator pressure sending and cutting-out electrical signals at various pressure levels. The electrical signals are transmitted to a normally-open, solenoid operated 2-way valve which vents and de-vents a pilot operated relief valve. When the accumulator is being charged, the pressure switch sends an electrical signal to the 2-way valve solenoid. With the accumulator charged, the pressure switch cuts out the signal, venting the relief valve and unloading pump/electric motor. The setting of the pressure switch determines the pressure range within which a pump/electric motor works.Using a pressure switch to vent a relief valve results in a pump/electric motor being fully unloaded when system conditions dictate.In the circuit illustrated, an unloading valve is used to dump a flow back to tank once an accumulator is charged to the unloading valve setting.Once the valve closes, pump/electric motor must there-fore generate power to recharge the accumulator to theunloading valve setting.Differential Unloading Relief Valve Instead of using a pressure switch and solenoid valveto vent a relief valve while an accumulator is charged, one hydraulic component can be used — a differential unloading relief valve.A differential unloading relief valve is specifically designed for use with accumulators. As its name implies, the valve unloads a pump/electric motor over a differential pressure range.A differential unloading relief valve consists of a pilot operated relief valve, check valve, and differential piston in one valve body. The valve body includes pump, tank, and accumulator passages.Maintaining PressureAccumulators are used to maintain pressure. This can be required in one leg of a circuit while pump/electric motor is delivering flow to another portion of the system.In the circuit illustrated, two clamp cylinders are re-quired to hold a part in place. As the directional valves are shifted, both cylinders extend the clamp at the pump’s compensator setting. During this time, the accumulator is charged to the setting also.System demands require that cylinder B maintain pressure while cylinder A retracts. As directional valve A is shifted, pressure at the pump, as well as in line A, drops quite low. Pressure at cylinder B is maintained because the accumulator has stored sufficient fluid under pressure to make up for any leakage in line B. Accumulators not only maintain pressure by compen-sating for pressure loss due to leakage, but they also compensate for pressure increase due to thermal fluid expansion or external mechanical forces acting on a cylinder.In the illustrated circuit, assume that the cylinder is operating near a furnace where ambient temperatures are quite high. This causes the fluid to expand. With an accumulator in the circuit, the excess volume is taken up, keeping the pressure relatively constant. Without an accumulator, pressure in the line would rise uncontrolla-bly and may cause a component housing, fitting, or conductor to crack.The same situation can also occur if an external mechanical force acts to retract the cylinder. Assume now that the cylinder is clamping a curing press. As curing occurs, heat within the press causes it to expand resulting in a force acting to retract the piston rod. The accumulator once again absorbs the additional volume, maintaining the pressure at a relatively constant level. *Safety Note:In any accumulator circuit, a means should be available for automatically unloading the accumulator when the machine is shut down. Such a valve could be located at this point in the circuit.RetractDeveloping FlowSince charged accumulators are a source of hydraulic Array potential energy, stored energy of an accumulator canbe used to develop system flow when system demandis greater than pump delivery. For instance, if amachine is designed to cycle infrequently, a smalldisplacement pump can be used to fill an accumulatorover a period of time. When the moment arrives for themachine to operate, a directional valve is shifteddownstream, and the accumulator delivers the requiredpressurized flow to an actuator.Using an accumulator in combination with a smallpump in this manner conserves peak horsepower. Forinstead of using a large pump/electric motor togenerate a large horsepower all at once, the work canbe evenly spread over a time period with a small pump/electric motor.Absorbing ShockHydro-pneumatic accumulators are sometimes used toabsorb system shock even though in this applicationthey are difficult to properly design into a system.Shock in a hydraulic system may be developed fromthe inertia of a load attached to a cylinder or motor. Or,it may be caused by fluid inertia when system flow issuddenly blocked or changed direction as a directionalvalve is shifted quickly. An accumulator in the circuit willabsorb some of the shock and not allow it to be trans-mitted fully throughout the system.Shock may also occur in a hydraulic system due toexternal mechanical forces. In the circuit illustrated, theload attached to the cylinder has a tendency to bouncecausing the rod to be pushed in and shock generated.An accumulator positioned in the cylinder line can helpreduce the shock effects.*Safety Note:In any accumulator circuit, a means should be availablefor automatically unloading the accumulator when themachine is shut down. Such a valve could be located atthis point in the circuit.Developing System FlowPiston and Bladder TypePlease fill out and fax to 815-636-4113.For assistance, call 815-636-4100.CUSTOMER:ADDRESS:CONTACT:PHONE:FAX:EMAIL:Quantity/Release:___________________________Quantity (Annual):___________________________Type (Piston or Bladder):_____________________Bore Size (piston only):______________________Capacity:__________________________________Working Pressure/Design Factor._______________Seal Type/Compound:________________________Hydraulic Port:______________________________Gas Port:__________________________________Operating Temperature Range:_________________System Fluid:______________________________Gas Valve:_________________________________Precharge:_________________________________Water Service?____________________________Plating/Coating:____________________________Material Type:______________________________Paint:____________________________________Switches:_________________________________Certification:_______________________________Special Test?_______________________________Special Label?_____________________________Customer Drawing Included?_________________Customer Part #___________________________Envelope Restrictions:_______________________Contact InformationApplication Description/CommentsCustomer RequirementsFORM-0117, Rev. 1Application Data SheetPiston and Bladder Type Notes。
Parker TechSeal产品说明说明书
ENGINEERING QUESTIONS:General Questions AnswerHow are Parker TechSeal’s products manufactured? Most Parker TechSeal products are manufactured through an extrusion process combined with a secondary finishing process.What families of products does Parker TechSeal offer? Parker TechSeal offers precision cut seals, long length extrusions, filter seals, Packer Elements, and ParFab spliced and fabricated gaskets. See /techseal for more information.What is the life expectancy for Parker TechSeal products (precision cut seals, spliced rings, custom designs, etc.)? Parker TechSeal does not make recommendations to the life expectancy of any of our products given a specific application. Our catalogs offer performance guidelines in the way of pressure, temperature, etc., which define the performance limits of our products. Every application is unique and variables beyond our control can greatly affect a products useful life expectancy. It is always the responsibility of the end user to validate the product they choose and make sure it meets the demands of their application.Design Questions AnswerMy profile is not listed in the ParFab Design Guide, can you still help? Yes, Parker TechSeal Division offers and has supplied custom designs to a wide variety of applications in many different markets. Contact Application Engineering at (864) 573-7332.How much force is required to compress a seal? Parker TechSeal’s team of Application Engineers use the latest Finite Element Analysis (FEA) to determine installation force, compressive force, contact pressure, etc.How to specify a standard TechSeal part number? Typical TechSeal ten-digit part number: X XXX X XXXXX1st digit: Profile configuration2nd digit to 4th digit: Configuration size (see ParFab Design Guide TSD 5420, pages 13 to 19)5th digit: Description (PSA backing, spooled, coiled, etc.) – Alpha # Alpha # DescriptionC Coiled footageL Cut to lengthP PSA backing spooled footageQ PSA backing coiled footageS Spooled footageX Splicing and fabrication6th digit to 10th digit: Elastomer materialExample: A001SS7395Part number indicate a solid O profile with a cross section of .040 + .003 inches [1.102 + 0.08 mm], supplied on spools and produced from TechSeal compound S7395.Custom profiles or configurations have part numbers of XXXXX X (5 numbers and 1 letter) and can be acquired by emailing*********************Material Questions AnswerWhat seal materials do you use to manufacture parts at Parker TechSeal? Parker TechSeal offers a wide variety of elastomer families:silicone, nitrile [buna-N], EPDM / EPR, HNBR, fluorosilicone, fluorocarbon, and Viton®. We offer compounds in these most of these families ranging from 40 to 95 durometer. Specialty approved materials include UL 94 V-0, UL 157, UL 497, NSF Standard 61, USP Class VI, FDA White List, and a variety of ASTM, MIL, and SAE certified materials. Please contact the Division for specific compound information.What is the shelf life of Parker TechSeal products? Parker TechSeal follows standard industry practices depending on the specific type of elastomer. Please see/literature/O-Ring%20Division%20Literature/shelf%20life.pdf for moreinformation.I currently buy a molded Parker O-ring, can I obtain an extruded product from the same material? Many Parker O-Ring Division compounds are available in the form of extruded products. If the requested compound is not available Parker TechSeal can recommend an equivalent material.Does Parker TechSeal manufacture foam or sponge materials? No, all Parker TechSeal compounds are fully dense elastomer materials.Splicing Questions AnswerHow are ParFab products spliced or bonded? Parker TechSeal Division utilizes a proprietary adhesive and a hot vulcanization of the bond.How strong are the splices? Using Parker TechSeal’s proprietary method, splices are typically stronger than traditional methods. Contact Application Engineering for additional information.What splicing configurations are offered? The most common splicing configurations are butt splicing and angled splicing. Custom configurations are available but depend on profile and material.Quoting Questions AnswerIf I have a question regarding pricing, whom at TechSeal Division do I contact? Please send an email to ********************* for any pricing questions.I have a drawing, how do I get a quote? Drawings and usage information can be forward directly to*********************.What are you standard lead times? Parker TechSeal’s standard lead time is 4-6 weeks for most standard profiles and materials. Parker TechSeal does offer expedite options and, in certain cases, can offer improved lead times.MARKETING COMMUNICATIONS QUESTIONS: General Questions AnswerHow do I order hard copies of TechSeal Division’s literature? You can order hard copies of TechSeal Division’s literature online at /techseal, under the Literature tab. Simply click “Add to Cart” button and edit your cart to indicate the desired quantity.What if I do not find the literature on the product(s) I need? All of our published literatures are on /techseal and we are working to get more added. If you are looking for information on a certain product, please send an email request to*********************** with the subject line “Product information inquiry” and we will do our best to accommodate your need.Does TechSeal Division have catalogs? Yes. TechSeal Division has several publications such as ParFab Design Guide and bulletins. Our catalog is ParFab Design Guide which can be downloaded or ordered on /techseal, under the Literature tab.We strongly recommend that you consult with our Application Engineers to find a design that specifically suits your applications.Don’t see your question here? Send an email to *********************** and we will answer yourquestions as soon as possible.。
Parker Hannifin Corporation FlexiLip
e x i L i p ™Catalog EPS 5350/USAI n t r o d u c t i o nContentsEngineering . .. .. . . . .. .. . . . . .9-3Materials ...................9-6Product Offering . . . . .. .. . . . . .9-9FlexiLipThe Parker FlexiLip is a rotary lip seal that features an ID lip that seals dynamically on a shaft and an elastomeric O-ring on its OD to seal statically in a bore. Since the lip is not spring energized, the radial lip contact forces are lower than a rotary FlexiSeal, which allows the seal to function at much higher surface speeds (up to 5000sfpm [25 m/s]).The seals are manufactured from a wide variety of PTFE composites and other machinable plastic materials.Standard O-ring choices are fluorocarbon,silicone,nitrile and EPDM.This broad foundation of standard O-ring and PTFE materials can be tailored to suit nearly all applications.Standard and Non-standard FlexiLip profiles are precision machined to fit inch-fractional and metric gland geometries. The FlexiLip design is extremely versatile because the seal is machined from a molded PTFE sleeve.Standard tooling and programs are used to manufacture seals efficiently by eliminating setup and programming time.FlexiLip seals are used in demanding applications where the operating conditions exceed the capabilities of elastomeric seals.ApplicationsThe FlexiLip’s versatility makes it suitable for a wide range of applications including:MarketsFlexiLip’s low tooling costs and rapid prototyping capability make the FlexiLip an appealing choice for customers in a variety of markets including:•Motors•Gear Boxes •Pumps •Bearings•Compressors•Cryogenics •Rolls•Extruders •Valves•Blowers •Spindles •Robotics •Mixers•Aerospace •Automotive•Chemical Process •Appliances •Machine Tools •Marine•Medical•Pharmaceutical •Military•Heavy Machinery •Pulp &Paper •Hydraulic•Food Processing •Electronic •Oil &Gas •Steel Mill •PlasticsWhat Is a FlexiLip andHow Does It Work?™p i L i x e l F n o i t c u d o r t n ICatalog EPS5350/USAPart Number Nomenclature—FlexiLipTable9-1. FlexiLip Part Number NomenclatureEnglishMetricFlexiLip Lip Style DesignationLF=Mandrel Formed LipLM=Machined LipLE =Elf-Shoe LipLD=Dual LipsLG =Garter Spring LipShaft DiameterExamples:00500=0.500"02500=2.500"11000=11.000"Seal WidthDesignation250=0.250"375=0.375"750=0.750"Metal Band DesignationS = Stainless Steel BandN=No Metal BandO-Ring MaterialDesignationN=Nitrile(NBR)V= Fluorocarbon(FKM)E=EPDMS= Silicone 4-Digit Material CodeExamples:0502=Carbon FiberFilled PTFE0301=Graphite FilledPTFEGland Cross-SectionExamples:250=0.250"375=0.375"750=0.750"0502LF37525002500N N SExcluder Lip DesignationE= Excluder LipN=No Excluder LipM502LF14020012000N N SFlexiLip Lip Style DesignationLF=Mandrel Formed LipLM=Machined LipLE=Elf-Shoe LipLD=Dual LipsLG = Garter Spring LipShaft DiameterExamples:00505=5.05mm05050=50.50mm12000=120.00mmSeal WidthDesignation090=9.0mm200=20.0mm384=38.4mmMetal Band DesignationS = Stainless Steel BandN=No Metal BandO-Ring MaterialDesignationN=Nitrile(NBR)V= FluorocarbonV=(FKM)E=EPDMS= Silicone4-Digit Material CodeExamples:M502 =Carbon FiberFilled PTFEM301=Graphite FilledPTFE(“M” indicates metric)Gland Cross-SectionExamples:0900=9.00mm1250=12.50mm1400=14.00mmExcluder Lip DesignationE =Excluder LipN=No ExcluderLipF l e x i L i p ™Catalog EPS 5350/USAE n g i n e e r i n gChoosing the Right DesignFrom Gland Dimensions to Part NumberStep 1—Choose profile. Choose the best profile for your application from the decision tree and table on Pages 9-9through 9-11,and place the 4-character profile description into thenumber as shown here in this example.Choice:LEN-S ProfileXXXX LEN XXXXXXXXXXXX SStep 2—Choose material. Choose the material for the application and place the 4-digit material code into the part number as shown here:Choice:0502—Carbon Fiber Filled PTFE0502LENXXXXXXXXXXXXS Step 3—Choose O-ring material.Choose the best O-ring material after considering thechemicals and temperatures it will be exposed to.Consult the Parker O-Ring Handbook (ORD5700A/US section II)as a general reference and choose the most appropriate material family.Place in the part number as shown here:Choice:Fluorocarbon O-ring (V code)0502LENXXXXXXXXXXX V SStep 4—Fill in the size portion of the part number.Choose the optimal size of the part based on the limitations of the cross-section and diameter (Page 9-11)and place into the part number as shown:Choice:1.500"shaft x 2.000"bore x 0.500"bore depth Calculate Radial Cross-Section and input into part number:(2.000"Bore –1.500"Shaft) /2=0.250"0502LEN 250XXXXXXXXVSInput shaft diameter into part number:0502LEN25001500XXXVSFind minimum seal width from Page 9-11and input into part number.Minimum seal width is always the most economical,but you can choose any width between the minimum recommended seal width and the actual bore depth. In this case you could choose any width between 0.250"and 0.500".Minimum seal width =0.250"250From Part Number to Gland DimensionsStep 1—Extract shaft dimensions from part number:0502LEN37502125736VS02125=2.125"shaft diameterFor 2.125"shaft tolerance =±.002"from drawing above.Step 2—Extract bore diameter from part number:0502LEN 37502125736VS375=0.375"cross-sectionbore Ø=shaft Ø+(2x cross-section)bore Ø=2.125"+(2x 0.375)=2.875"For 2.875"bore, tolerance =+.004/-.000 from drawing above.Step 3—Extract bore depth from part number:0502LEN37502125736VS736=0.736"seal heightmin. bore depth =seal height +0.010"min. bore depth =0.736"+0.010"=0.746"™p i L i x e l F gn i r e e n i g n5350/USAFlexiLip InstallationProper installation tools and techniques must be used to install the seal without damaging the critical sealing areas.Figure 9-1.FlexiLip Installationgn i r e e n i g n E ™p i L i xCatalog EPS 5350/USAF l e x i L i p ™Catalog EPS 5350/USAM a t e r i a l sCommon Materials Used in this ProductThe most popular fillers for FlexiLip products are graphite,fiberglass/molybdenum disulfide,carbon fiber and mineral.A complete listing of materialproperties and limitations appears on Pages 9-7and 9-8.Feel free to contact the EPS division PTFE Engineering Team at (801)972-3000for more guidance on material selection.0301—Graphite FilledSince graphite is often used as a lubricant,it does notsignificantly increase the coefficient of friction of PTFE when used as a filler. The low friction allows the compound to be used when both shaft speed and pressure are high. Graphite also is chemically inert which enables its use in corrosive medias.0615—Proprietary Low Wear PTFEThis proprietary filled PTFE offers low wear and friction properties,used in general applications where long life is required.Not recommended for applications with abrasive media.0204— Molybdenum Disulfide and Fiberglass Filled Molybdenum disulfide increases the hardness of the seal surface while decreasing friction.It is normally used in small proportions combined with other fillers such as glass.MoS 2is also inert towards most chemicals.0512—Carbon Fiber FilledCarbon fiber lowers creep, increases flex and compressive modulus and raises hardness.Coefficient of thermalexpansion is lowered and thermal conductivity is higher for compounds of carbon fiber filled PTFE.Ideal for automotive applications in shock absorbers and water pumps.0127—Mineral Filled —3A Sanitary ApprovedMineral is ideal for high temperatures and offers low abrasion to soft surfaces.PTFE with this filler can easily be qualified to FDA and other food-grade specifications like 0127and 0128.Catalog EPS 5350/USAM p i L i x e l Fs l a i r e t a ™Table9-3.FlexiLip,FlexiCase and FlexiSeal PTFE Materials—Typical Physical Properties*Hytrel® is a registered trademark of DuPont.™p i L i x e l F s l a i r e t aMCatalog EPS5350/USANote:We emphasize that this tabulation should be used as a guide only.Table9-3.FlexiLip,FlexiCase and FlexiSeal PTFE Materials—Typical Physical Properties(Continued)F l e x i L i p™Catalog EPS 5350/USA P r o d u c t O f f e r i n gThe key application considerations that help in the selection of the right FlexiLip profile are operating temperature,media abrasiveness, pressure,external contamination, friction requirements,shaft diameterand Total Indicator Runout (TIR).Total Indicator Runout (TIR)ishow far the shaft is misaligned withthe bore during rotation.This is fully characterized in the general engineering section on Page2-25.Only one FlexiLip profile is able to handle continuous service with runout conditions up to0.020" (0.5 mm); the LGN-N (or the LGN-S with the steel band). Keep in mind that the faster a shaft spins,the less TIR the seal can withstand.If the temperatures are extreme or if the shaft is over4inches in diameter, Parker recommends using a profile with a stainless steel band inserted into the side for dimensional stability during thermal cycling.This standard design can be called out by switching the“-N”for a“-S”in the profile code(and the part number).These decision trees are to be used as an engineering guide only.Often several other parameters must be considered to optimize seal design. Contact Parker’s PTFE Engineering Team for confirmation of your choice or further recommendations.Parker also recommends that any seal be tested in the application conditions before releasing for production.Decision Trees™p i L i x e l Fg n i r e f f Ot c u d o r PCatalog EPS5350/USAProfiles*Metal Banded — 301 Stainless Steel. For use when temperature is <0 or >250 °F (<-18 or >121 °C) or shaft diameter > 4.000" (102 mm). **Consult engineering for shaft diameters that are outside the range of our standards.***Seals that are retained with an extrusion gap smaller than0.020" (0.5 mm) will go to higher pressures than listed.ConsultEPS Division Engineering.Table9-4.Product Profilesgn i r e f f O t c u d o r P ™p i L i x e l F Catalog EPS 5350/USA03/25/06Catalog EPS5350/USANotes。
企业信用报告_派克汉尼汾工业液压技术(上海)有限公司
目录一、企业背景 (5)1.1 工商信息 (5)1.2 分支机构 (5)1.3 变更记录 (5)1.4 主要人员 (7)1.5 联系方式 (8)二、股东信息 (8)三、对外投资信息 (8)四、企业年报 (8)五、重点关注 (10)5.1 被执行人 (10)5.2 失信信息 (10)5.3 裁判文书 (10)5.4 法院公告 (10)5.5 行政处罚 (10)5.6 严重违法 (11)5.7 股权出质 (11)5.8 动产抵押 (11)5.9 开庭公告 (11)5.11 股权冻结 (11)5.12 清算信息 (11)5.13 公示催告 (12)六、知识产权 (12)6.1 商标信息 (12)6.2 专利信息 (12)6.3 软件著作权 (13)6.4 作品著作权 (13)6.5 网站备案 (13)七、企业发展 (13)7.1 融资信息 (13)7.2 核心成员 (13)7.3 竞品信息 (14)7.4 企业品牌项目 (14)八、经营状况 (14)8.1 招投标 (14)8.2 税务评级 (15)8.3 资质证书 (15)8.4 抽查检查 (16)8.5 进出口信用 (16)8.6 行政许可 (16)一、企业背景1.1 工商信息企业名称：派克汉尼汾工业液压技术(上海)有限公司工商注册号：310000400678046统一信用代码：91310000586848665F法定代表人：侯奕飞组织机构代码：58684866-5企业类型：有限责任公司(台港澳法人独资)所属行业：通用设备制造业经营状态：开业注册资本：1,000万(美元)注册时间：2012-03-20注册地址：上海市青浦区香花桥街道拓青路299、369号营业期限：2012-03-20 至 2042-03-19经营范围：研发、设计、生产、组装：工业及工程机械用液压动力站，液压顶升系统，泵，油缸，液压伺服系统，电子监控系统，气压动力装置及附件，电动机零件，电动缸，交直流电气传动设备及其配件，流体控制元器件，电子控制开关和控制电路元件，直线电机和工业自动化相关产品，汽车、太阳能电池、燃烧电池、家电生产设备的自动组装装置、检测装置，产业用机器人、半导体制造装置、搬运设备、环境处理设备及相关产品和零部件（以上除特种设备）；销售自产产品，并提供相关技术咨询及其他配套服务。
帕金 工业设计史 -回复
帕金工业设计史-回复帕金（Parker）作为世界著名的设计师和制造商，以其优秀的创新设计和卓越的品质享誉全球。
在他们的产品线中，著名的产品包括钢笔、剃须刀以及其他的办公用品。
他们的设计历史可以追溯到19世纪末期，而如今已经成为世界上最受欢迎和最知名的品牌之一。
在本文中，我们将一步一步地回答关于帕金工业设计史的问题，以帮助读者更好地了解这个品牌的发展历程。
首先，让我们从帕金公司的起源开始。
帕金公司成立于1888年，创始人为乔治·帕金（George S. Parker）。
他最初是一位猎头销售员，为铅笔制造商销售自己的产品。
然而，乔治·帕金很快发现了一种创新的方向，也就是使用钢笔替代铅笔。
于是，他开始致力于开发新型的钢笔，并于1891年成功地推出了他的第一支“帕金两用笔”。
这支钢笔是一个革命性的设计，它具有可替换的色带和墨囊，同时还有一个可调节的笔尖。
这个设计使得钢笔更容易维护和更方便使用，因此很快在市场上获得了成功。
乔治·帕金以其出色的创新设计和优质的制造工艺为基础，将公司发展成为行业领先者。
他的钢笔成为了世界各地商务人士和文人雅士的首选工具。
在20世纪初期，帕金公司继续致力于钢笔的创新设计。
在1915年，他们推出了一种全新的可充电钢笔。
这是世界上第一支利用真空抽吸原理的钢笔，大大提高了墨水的容量和使用寿命。
这一设计标志着帕金公司在钢笔领域的领先地位，并为他们赢得了许多客户和赞誉。
然而，帕金公司在20世纪中期遇到了一些困难。
由于越来越多的人开始使用便宜的圆珠笔和触控笔，帕金的钢笔销售量开始下降。
为了应对这一挑战，帕金公司决定拓展产品线，进军剃须刀市场。
于是，在1952年，他们推出了第一款电动剃须刀。
这款剃须刀配备了新颖的圆形刀网和用作纽扣充电的充电底座。
这个创新的设计大受欢迎，帮助帕金公司重新夺回了消费者的关注。
从那时起，帕金公司不断推出创新产品，为市场带来惊喜和变革。
帕森逊(上海)实业有限公司(企业信用报告)- 天眼查
截止 2018 年 09 月 24 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信 息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参 考。
4.4 企业业务
截止 2018 年 09 月 24 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信 息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参 考。
组织机构代码： 561903410
企业类型：
有限责任公司（自然人投资或控股）
所属行业：
批发业
经营状态：
存续
注册资本：
50 万人民币
注册时间：
2010-09-10
注册地址：
青浦区公园路 99 号舜浦大厦 2 层 C 区 205 室
营业期限：
2010-09-10 至 2020-09-09
经营范围：
销售眼镜及配件、日用百货、五金交电、文化办公用品、包装材料、服装服饰，商务信息咨询，计算机
5.2 失信信息
截止 2018 年 09 月 24 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信 息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参 考。
5.3 法律诉讼
截止 2018 年 09 月 24 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信 息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参 考。
4
四、企业发展
4.1 融资历史
截止 2018 年 09 月 24 日，根据国内相关网站检索及天眼查数据库分析，未查询到相关信息。不排除因信 息公开来源尚未公开、公开形式存在差异等情况导致的信息与客观事实不完全一致的情形。仅供客户参 考。
企业信用报告_杭州帕柯斯轴承有限公司
基础版企业信用报告
5.10 司法拍卖 ....................................................................................................................................................9 5.11 股权冻结 ....................................................................................................................................................9 5.12 清算信息 ....................................................................................................................................................9 5.13 公示催告 ....................................................................................................................................................9 Байду номын сангаас、知识产权 .......................................................................................................................................................10 6.1 商标信息 ....................................................................................................................................................10 6.2 专利信息 ....................................................................................................................................................10 6.3 软件著作权................................................................................................................................................10 6.4 作品著作权................................................................................................................................................10 6.5 网站备案 ....................................................................................................................................................10 七、企业发展 .......................................................................................................................................................10 7.1 融资信息 ....................................................................................................................................................10 7.2 核心成员 ....................................................................................................................................................11 7.3 竞品信息 ....................................................................................................................................................11 7.4 企业品牌项目............................................................................................................................................11 八、经营状况 .......................................................................................................................................................11 8.1 招投标 ........................................................................................................................................................11 8.2 税务评级 ....................................................................................................................................................11 8.3 资质证书 ....................................................................................................................................................11 8.4 抽查检查 ....................................................................................................................................................12 8.5 进出口信用................................................................................................................................................12 8.6 行政许可 ....................................................................................................................................................12
企业信用报告_鲍斯压缩机(上海)有限公司
鲍斯压缩机(上海)有限公司
基础版企..................................................................................................................................................5 1.1 工商信息 ......................................................................................................................................................5 1.2 分支机构 ......................................................................................................................................................5 1.3 变更记录 ......................................................................................................................................................5 1.4 主要人员 ......................................................................................................................................................8 1.5 联系方式 ......................................................................................................................................................9
肯佩斯幕墙工程顾问（上海）有限公司介绍企业发展分析报告
Enterprise Development专业品质权威Analysis Report企业发展分析报告肯佩斯幕墙工程顾问（上海）有限公司免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:肯佩斯幕墙工程顾问（上海）有限公司1企业发展分析结果1.1 企业发展指数得分企业发展指数得分肯佩斯幕墙工程顾问（上海）有限公司综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。
该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。
1.2 企业画像类别内容行业专业技术服务业-工程技术与设计服务资质增值税一般纳税人产品服务程管理服务，从事建筑工程、新能源科技、环1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.4行政处罚-工商局4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.11产品抽查-工商局4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。
阿特拉斯·科普柯（上海）工艺设备有限公司介绍企业发展分析报告
Enterprise Development专业品质权威Analysis Report企业发展分析报告阿特拉斯·科普柯（上海）工艺设备有限公司免责声明:本报告通过对该企业公开数据进行分析生成，并不完全代表我方对该企业的意见，如有错误请及时联系;本报告出于对企业发展研究目的产生，仅供参考，在任何情况下，使用本报告所引起的一切后果，我方不承担任何责任:本报告不得用于一切商业用途，如需引用或合作，请与我方联系:阿特拉斯·科普柯（上海）工艺设备有限公司1企业发展分析结果1.1 企业发展指数得分企业发展指数得分阿特拉斯·科普柯（上海）工艺设备有限公司综合得分说明：企业发展指数根据企业规模、企业创新、企业风险、企业活力四个维度对企业发展情况进行评价。
该企业的综合评价得分需要您得到该公司授权后，我们将协助您分析给出。
1.2 企业画像类别内容行业通用设备制造业-其他通用设备制造业资质增值税一般纳税人产品服务组装单级和多级齿轮式涡轮压缩机、直接驱动1.3 发展历程2工商2.1工商信息2.2工商变更2.3股东结构2.4主要人员2.5分支机构2.6对外投资2.7企业年报2.8股权出质2.9动产抵押2.10司法协助2.11清算2.12注销3投融资3.1融资历史3.2投资事件3.3核心团队3.4企业业务4企业信用4.1企业信用4.2行政许可-工商局4.3行政处罚-信用中国4.5税务评级4.6税务处罚4.7经营异常4.8经营异常-工商局4.9采购不良行为4.10产品抽查4.12欠税公告4.13环保处罚4.14被执行人5司法文书5.1法律诉讼（当事人）5.2法律诉讼（相关人）5.3开庭公告5.4被执行人5.5法院公告5.6破产暂无破产数据6企业资质6.1资质许可6.2人员资质6.3产品许可6.4特殊许可7知识产权7.1商标7.2专利7.3软件著作权7.4作品著作权7.5网站备案7.6应用APP7.7微信公众号8招标中标8.1政府招标8.2政府中标8.3央企招标8.4央企中标9标准9.1国家标准9.2行业标准9.3团体标准9.4地方标准10成果奖励10.1国家奖励10.2省部奖励10.3社会奖励10.4科技成果11 土地11.1大块土地出让11.2出让公告11.3土地抵押11.4地块公示11.5大企业购地11.6土地出租11.7土地结果11.8土地转让12基金12.1国家自然基金12.2国家自然基金成果12.3国家社科基金13招聘13.1招聘信息感谢阅读:感谢您耐心地阅读这份企业调查分析报告。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
4
Parker O-Bag to the Rescue 派克袋装 型圈特卖 派克袋装O型圈特卖
• Consider adding 100 gram of O-Lube to assist installation. 可考虑增加100克润滑脂以辅助安装 可考虑增加 克润滑脂以辅助安装
5
Parker O-Bag to the Rescue 派克袋装 型圈特卖 派克袋装O型圈特卖
• Consider adding O-Ring sizing cone. 可考虑增加O型圈测量锥 可考虑增加 型圈测量锥
6
Parker O-Bag to the Rescue 派克袋装 型圈特卖 派克袋装O型圈特卖
• Consider using O-Ring extraction tool. 可考虑增加O型圈安装辅助工具 可考虑增加 型圈安装辅助工具
7
General Material Compatibility 材料兼容性
N0674-70 and N1490-90 • Temperatures -35 oC to 100 oC 温度 -35 oC 到100 oC • Hydrocarbons: propane, butane, mineral oils and grease, diesel, gasoline, vegetable oils 碳氢化合物：丙烷、丁烷、矿物油、油脂、柴油、 碳氢化合物：丙烷、丁烷、矿物油、油脂、柴油、汽油和植物油 • HFA, HFB, and HFC hydraulic oils HFA、HFB和HFC液压油 、 和 液压油 • Diluted acids, alkali and salt solutions 酸碱盐溶液 • Water up to 100 oC 达到100oC的水 达到 的水
• Only available in N0674; N1490 for tube fitting sizes. 目前只有N0674和N1490两种材料用于管路接头 目前只有 和 两种材料用于管路接头
3
ISO6149 Metric Tube Fitting Sizes ISO6149公制管路接头尺寸 公制管路接头尺寸
9
Common Application Areas for O-Bag 袋装O型圈常见应用 袋装 型圈常见应用
• Truck fleet repairs (air brake lines, compressors, filter cartridges, water lines) 卡车维修（气闸线路、压缩机、过滤器外壳、水管线路） 卡车维修（气闸线路、压缩机、过滤器外壳、水管线路） • Gasoline handling & dispensing equipment repairs 汽油处理和分配设备维修 • Factory equipment repairs 工厂设备维修
ห้องสมุดไป่ตู้
10
Parker O-Bag to the Rescue 派克袋装O型圈特卖 派克袋装 型圈特卖
1
Parker O-Bag to the Rescue 派克袋装 型圈特卖 派克袋装O型圈特卖
• Small package quantities (varies by size 100 pcs to 2 pcs) 小包装（包装数量从2件装到 小包装（包装数量从 件装到100件装不等） 件装不等） 件装到 件装不等 • Unique part number 特定产品型号…OBAG014N0674 = (2-014 N0674) 特定产品型号 • Ideal for Parker Stores’ small volume requirements and fits for small repair and maintenance jobs. 满足ParkerStore少量定购的要求，并非常适合维修保养市场 少量定购的要求， 满足 少量定购的要求 • Min total order value 170 RMB 最小的订单总值为170元 最小的订单总值为 元
8
Common Application Areas for O-Bag 袋装O型圈常见应用 袋装 型圈常见应用
• Hydraulic repairs (cylinders, valves, fittings, pumps, motors) 液压系统维修（液压缸、 接头、 马达） 液压系统维修（液压缸、阀、接头、泵、马达） • Pneumatic repairs 气动系统维修 • Plumbing and gas line repairs (valves, faucets, fittings) 水管和气体线路维修（ 水龙头、接头） 水管和气体线路维修（阀、水龙头、接头）
2
Parker O-Bag to the Rescue 派克袋装 型圈特卖 派克袋装O型圈特卖
• Sizes limited to AS568 and ISO6149 metric tube fitting sizes (see Page4) 尺寸符合AS568和ISO6149公制管路接头尺寸标准（详见第 页） 公制管路接头尺寸标准（ 尺寸符合 和 公制管路接头尺寸标准 详见第4页