英文产品说明书的翻译模板
产品说明书英文翻译
产品说明书英文翻译产品说明书英文翻译【篇一：产品说明书翻译】1.5岁以下儿童禁用敌胺。
children under 5 years of age should not be treated with antistine.2.对本品过敏的患者禁用本品。
this medicine is contraindicated in patients with known hypersensitivity.3.胆管阻塞患者禁用熊去氧胆酸。
ursosan should not be givento patients suffering from bile duct obstruction.4.如果不是临床需要,建议本品不要与环丙烷合用。
it is advisableto avoid the use of aramine with cyclo-propane unless clinical circumstances demand such use. 5.丙磺舒被推荐用于治疗痛风及在抗感染治疗时增加并延长青霉素类的血浆浓度。
benemid is recommended for the treatment of gout , and to ieace and prolong the plasma concentration of penicillins and cephalosporins during anti- infective therapy.6.阿霉素常与其他细胞毒药物合用于化疗方案。
adriamycin is frequently used in combination chemotherapy regiments with other cytotoxic drugs. 7.阿米卡星可用于治疗革兰氏阳性敏感菌引起的感染，也可用于治疗敏感葡萄球菌引起的感染。
amikacin is useful in the treatment of infections from gram－negative sensitive species，there included the pseudomonas species；it may also be useful to treat infections caused by sensitive staphylococci.【篇二：说明书的英文怎么写】目前，我国的产品说明书的翻译有许多不尽如人意的地方，概括起来，是由于不懂英语说明书的句型和选词不当所致。
英文产品说明书
Spiral chute1、product descriptionSpiral chute is integrated spiral separator, spiral chute, shaker, centrifugal concentration machine characteristics of the equipment, mining, mineral processing is the best equipment, especially the seaside, riverside, sand beach, the stream of placer mining is more ideal. The product has the advantages of reasonable structure, simple installation, covers an area of small, simple operation, stable ore beneficiation, clear, large processing capacity, high efficiency enrichment ratio high, high recovery rate, reliable operation characteristics. Have weight light, moisture-proof, rust-proof, corrosion resistance, of the feeding quantity and concentration, particle size, quality of volatility adaptability is strong, no noise.2、Separation principleSpiral chute is a membrane flow gravity separation equipment, the selection principle is the use of useful minerals and gangue in proportion, particle size, shape differences, in rotating inclined flow by gravity, centrifugal force, hydrodynamic pressure and friction force with different groove face, realize the useful minerals and gangue stratification, branch tape sorting. Heavy, coarse granularity, fast sedimentation of particles gradually moved towards the spiral groove inner edge, the proportion of small, fine particle size, particle sedimentation slow gradually moved to the spiral groove edge, gradually banding, culminating in the spiral groove end by cutting ore tank is respectively connected out, to realize separation.3、ApplicationThe sorting equipment for grain size mm fine iron ore, titanium ore, chromite,pyrite, zircon, monazite, rutile , phosphorus ore, tungsten, tin, B mine of tantalum niobium ore with the difference of specific gravity, and other non-ferrous metals, rare metals and non-metallic mineral. The sorting process with a stable, easy to control, to allow changes to the mineral concentration range, high enrichment, high recovery rate, small occupation area, little water consumption, simple structure, no need of power, large processing quantity, simple installation, convenient operation, small investment, quick advantages.4、The method of useThe spiral chute is erected, calibrated vertical line, with metal or wood fixed in position, by the sand pump will ore to spiral top two inlet, adding supplemental water, mineral ore concentration regulation paddle, paddle down naturally from high swirl, in rotating inclined flow produces a kind of inertial centrifugal force, with ore proportion, particle size, shape differences, swirl through the action of gravity and centrifugal force, will be mine and sand separating, concentrate into the concentrate pipe connected with a hopper, tailings into tailing bucket a pipeline is connected to a sand pool, then the pump discharge, finished processing the whole process.5、Structure and technical parameterMainly by the ore separator, cross, to mine groove, helical groove, cutting trough, pick ore bucket and slot pillar of seven components. The helical groove is spiral chute of the main components, each spiral chute is 2 -- 4 head spiral groove, each head spiral groove is composed of 5 spiral plates (according to mineral properties and beneficiation process need, after tests also consider 4 circles, in order to reduce the equipment height) spiral plate by bolts are fixed together, spiral sheet is made of glass fiber reinforced plastic (FRP) made, light weight, anti-corrosion,moisture-proof, anti deformation and strength.6、InstallationSpiral chute installation procedures and requirements:1)First check the glass steel spiral slice quality (especially the work surfacequality), size and shape to meet the requirements for assembly2)Screw plate connecting bolt hole by the general factory in advance with a drill.If the manufacturer has no processing is required, according to the same template drilling, in order to ensure good interchangeability.3)Bolt the five coil sheet are connected into a group of spiral groove, level set,two adjacent flange connection within the surface smooth transition is connected, special attention should be paid on the surface may not be lower than the corresponding lower sheet surface. Along the diameter direction.(the slot widthdirection) to edge alignment as the standard, do not allow plate rim inside, so the installation is intended to prevent the occurrence of ore fluid splash.Joint gap, with putty.4)The coupled five of a group of four (or two or three) spiral groove rotatingtogether into a desired shape, distribution.5)The four roots (three) column is respectively arranged in four (or three, two)spiral groove, bolt the spiral groove and the pillar is fixed, then install the cross (tripod), so that each spiral along the park are cloth, then all bolts.After installation, spiral plate to maintain the natural shape, with no obvious variant.6)Would give mine groove and product interception groove are respectively arrangedin the spiral groove of the head end and the tail end to ensure that the connection of close water leakage. If there is a gap, by coating sealing. To ensure the smooth transition of groove surface.7)To mine even divider and product assemble bucket and the slot bracket is notconnected, free placed on the bracket, the installation should pay attention to in the chart are position. Each row of tube to distributor are respectively aligned with corresponding to the ore tank.6-S shaking table1、ApplicationThe 6-S shaking table is one of the main equipment of gravity concentration, it is widely used in separating tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ore. Can be used for roughing, concentration, scavenging different operations, separating coarse sand fine sand, clay (- of different grain grade It can also be used to separate iron, manganese ore and coal. Whenprocessing tungsten, tin ore, the table effective recycling particle size range for the mm.2、PerformanceThe shaking table is in the beneficiation process is complex a tilt bed plane, ore particle swarm from the bed surface angle to the trough into, at the same time by lateral flushing water supply to the water tank, and the mineral particles in gravity, lateral flow momentum, bed reciprocating asymmetric motion produced by the inertia and friction effects next, according to the proportion and hierarchical granularity, and along the bed surface for longitudinal movement along the inclined bed surface and transverse motion. Therefore, specific gravity and particle size of different mineral particles along the direction of movement of the respective gradually by the A side to side B fan-shaped shed, concentrate and tailings from the end side of the discharging end is divided into different, concentrate, middling and tailings.6-s has a double high rich ore ratio, high separation efficiency, safeguards easily, convenient for adjusting the stroke. In change cross fall and stroke is still maintain the surface of bed movement balance, the spring is placed in the box body, compact structure, and can in turn draw final concentrate and tailings.3、Classification1）According to the different position of ore, shaker can be divided into right and left type cradle type cradle two forms. The right type cradle for the ore location for the rocking mechanism is on the right side, left type cradle to mine is located in the left.2）6-S shaker can be divided into fixed shaking table，channel bar shaking table, big channel steel shaking table.3）According to the concentration particle size, divided into coarse sand table, sand table and slimmer three.4、StructureThis table is mainly composed of a bed head, motor, adjustable slope, the bed surface, mine shafts, sink, and reflex and lubrication system of eight components.The surface of bed longitudinal reciprocating motion through a crank connecting rod type driving mechanism to realize. The electric motor through the belt drive to make the big belt wheel drives the crankshaft to rotate, the rocker made subsequently moves up and down, rocker downwards, elbow board drive rear axle and the reciprocating rod moves backwards, the spring being compressed. The bed surface is through linkage seat and a reciprocating lever connected, so this is also so the bed surface for backward movement, when the rocker upward movement, due to the tension spring drive, the bed surface will move forward.5、Specification6、Installation and cautions1) On the basis of drawing, reserved anchor screw holes or pouring good foundation plate, drilling, hole expansion, the construction of concrete foundation.2) The shaker frame placed on the basis, make each place, calibration and pad frame beam level.3) The Department of anchor screws tightening, the cradle is fixed on the basis of.4) Mounted on the drag device, bed surface, bedside and bed and the bed surface connecting rod, attention should be to the front to bedside flywheel.5) Connect the switch of the motor insurance, check whether the motor leakage, and then good motor wire.6) The bed surface is not strong beat, collision; not in high temperature and heavy pressure; avoid oil pollution and sun and rain, prevent degeneration.7) After the installation, a detailed examination, the confirmation, removal of equipment and surrounding sundries.8) Roller with 10-20 G oil, not to splash as well. The seat sliding rack injection oil to drown the sliding bearing and the lower bearing contact fit; lever type rocking frame bearing has been manufactured with good lithium grease.9）Put the washing water air machine test machine operation, observation and examination: starting and operation, the moving parts are not loose fever or unusual sounds.10）Empty test machine to normal, can load test machine, according to the selected minerals, inspection and adjustment of the stroke, stroke, springs, bed longitudinal slope and transverse slope so as to achieve the optimal separation effect. After normal cleaning, it can be put into production.7、operation and maintenance1）Feeding volume and concentration of proper, if give mine too large volume, concentration, recovery rate.2）The bed surface transverse slope large, flushing water should be smaller; slope is small, flushing water shall be selected.3) Stroke and frequency of stroke should be adjusted properly. Stroke is too small too big, affected grain stratification. To change the diameter of a motor belt pulley, adjustable stroke Adjusting spindle and the set of eccentric combination, can have different stroke,Permanent magnetic separator1、Range of applicationThe series of magnetic separator for sorting magnetic minerals, non-metallicmaterials and waste materials deironing. Such as: reduction of titanium magnetite, iron ore smelting in front of the purifying selection, ceramic clay, feldspar, quartz, iron ore, coal and other materials in addition to iron.2、The structure and working principleCT series cylinder type permanent magnetic separator, drum body and a groove near the magnetic system parts are made of non-magnetic material of stainless steel, cylinder end cap cast in aluminum, and other ordinary steel production. Equipment structure is composed of a machine frame, body, a cylinder, a magnetic system, power plant, feed, water, discharging part. The groove body and cylinder distance according to the mineral separation of lifting adjustment, magnetic angle can be adjusted at.(no water supply device of dry type)1）CTC dry magnetic separator: dry aggregate from the hopper into the cylinder directly to the upper or lower portion of the drum, magnetic mineral particles are magnetic in the surface of the drum, winding drum rotates to the edges of the natural unload magnetic system. Non magnetic mineral particles by the action of gravity and centrifugal force and magnetic products into different ore bucket. Magnetic products magnetic products and is arranged in the middle of ore isolation plate, according to the mineral material selected to adjust the situation.2）CTB semi-counter current magnetic separator magnetic lines in the lower part of drum. Pulp from the tank into the lower part of the lower roller, non-magnetic minerals in the direction of movement and the rotation of the drum in the opposite direction, magnetic minerals moving direction and rollers rotate in the same direction. The lower part of the spray pipe body is inserted, is used to adjust the separating operation of slurry concentration, the slurry dispersed into loosely suspended state into the separation space. The magnetic particles in the magneticsystem of magnetic field force, is absorbed on the surface of the roller, roller together with the upwardly mobile. In the moving process, because the magnetic lines of alternating polarity, so that the magnetic mineral particles into a chain of turning, in the turning process, the inclusions in the magnetic mineral particles in non magnetic mineral impurities is cleared, so as to effectively improve the purpose of magnetic products. Semi countercurrent magnetic separator for mineral slurry concentration and granularity is sensitive to change, when the concentration is too large or grain through the metropolitan influence index of mineral processing.3）CTS downstream separator: feeding direction and the direction of rotation of the drum or magnetic mineral moving direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from beneath the tank bottom roller two and the gap between the discharge, magnetic mineral particles are sucked on the surface of the cylinder, with the roller to rotate together to the magnetic system edge discharge, magnetic ore discharging position is provided with a discharging water pipe. Downstream separator on mineral beneficiation of wide adaptability, easy separating space is smooth without obstruction, particularly applicable to contain magnetic minerals a larger proportion of the magnetic separation process.4）CTN upstream separator: feeding direction and drum rotation direction or magnetic material moves in the opposite direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from tank bottom hole discharging tailings, magnetic mineral particles with the roller against the feed direction to give mine is discharged to the magnetic ore groove, for the reduction of magnetic products with non-magnetic mineral, in magnetic ore unloading mounted before the cleaning water pipe, magneticore discharging position is provided with a discharging flushing pipe. Countercurrent separation machine due to the magnetic ore discharge end distance to mine mouth close, magnetic turning effect is poor, so the magnetic ore grade to be slightly lower, but its tailings ore export far away from the mouth, the pulp after longer divided districts, increases the magnetic mineral particles are magnetically attracted to opportunity, all the magnetic separator magnetic product recovery rate is quite high, counter flow type magnetic separator suitable for only require nonmagnetic product precision of various minerals.3、Specification4、Installation and use1) At first machine installed must check the transport loading and unloading is loose, damaged.2) The horizontal position, implement, conventionally grounded.3) Check, adjust the magnetic system to the fixed position processing and working distance.4) Before the first test machine, drum empty running again, water supply, feeding, everything is normal, and then evenly feeding load test machine. According to the material separation requirements for adjusting the output, quality, recovery rate.5、Preventive maintenance1) Removing: drum removable from the frame, standing on a stable level of supporting frame. Have a head driving device placed below.2) When hoisting drum magnetic parts do not close to the strong magnetic tool or magnetic materials.3) Will fixed aluminum cover fastening screw removal. The 4 screw mount aluminum end cover removing hole. Parallel to the rotating 4 pearl will cover up after unloading, and then remove the lower end cover fastening screw, can come up with a stainless steel cylinder. Aluminum cover middle small iron cover for the bearing cover and cover solid screw.4) The assembly must be completely to the magnetic surface and stainless steel inner cylinder of clean.5) Transmission gears, bearings, reducer shall be regularly maintained and fillingcalcium base grease lubricating oil.6、Cautions1) Strong magnetic tools, articles shall not be close to the magnetic system.2) Do not beat, collision stainless steel tube.3) Super size mineral, not into the machine, so as not to get stuck or wear of stainless steel copper cylinder.4) Abnormal sound, should be excluded.Ball mill1、Purpose and use scopeBall mill is the material being broken, and then smash the key equipment. Mill widely used in cement, silicate products, new building materials, refractory materials, fertilizer, black and non-ferrous metal processing and glass ceramic production industry, for all kinds of ores and other materials may be grinding of dry or wet grinding.2、Working principleThis machine is a horizontal cylinder rotating device, outer gear transmission, the warehouse has stepped lining board or corrugated liner, built in different specifications of steel balls, the rotation of the cylinder to generate centrifugal force will bring the steel ball to a certain height after the fall, the material produces severe impact and abrasive. Powder through the discharge grate discharge, then finish grinding operation.3、StructureThe equipment consists of feeding, discharging part, turning part, a transmission part (reducer, small transmission gear, motors, electrical control) and other major parts. Hollow shaft with steel castings, the liner is detachable, rotary gear hobbing with casting, cylinder liner wear studded body, has good abrasion resistance. The machine running stable, reliable work.4、Specification5、Installation and adjustment1）The basic requirements of installation：A、Bill mill should be installed on a solid concrete foundation;B、Ball mill cylinder should be installed after the ground with sufficient height, so as to facilitate the replacement of cylinder liner and grinding body, and a screw bolt lining board;C、Our generation base map, there are parts of a machine center line and the center line and the installation of anchor bolt anchor bolt size, random supply, base map size only remaining user base design reference, not for construction of.2）General requirements for the installationA、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.B、Machine parts are in the transport loading and unloading damage, such as damageshould be trimmed.C、All the connecting bolts should be uniform, firmly tightened。
产品说明书英文模板图片
Product SpecificationsProduct Name: [Insert Product Name] Version: [Insert Version Number] Release Date: [Insert Release Date] License: [Insert License Type]Table of Contents1.Introduction2.Technical Specifications3.Features4.Installation Instructionser Guide6.Troubleshooting7.Warranty Information8.Contact Information1. IntroductionThe product [Insert Product Name] is a high-quality and versatile [Insert Product Description]. This product aims to provide users with a seamless and efficient experience. This document serves as a comprehensive guide to understanding the functionalities, technical specifications, installation instructions, and use of the product.2. Technical Specifications•Dimensions: [Insert product dimensions]•Weight: [Insert product weight]•Material: [Insert product material]•Power Supply: [Insert power supply requirements]•Connectivity: [Insert connectivity options]•Compatibility: [Insert compatible devices/systems]3. Features•[Insert feature 1]•[Insert feature 2]•[Insert feature 3]•[Insert feature 4]•[Insert feature 5]4. Installation InstructionsFollow these steps to install and set up the product:1.Step 1: [Insert installation step 1]2.Step 2: [Insert installation step 2]3.Step 3: [Insert installation step 3]4.Step 4: [Insert installation step 4]5.Step 5: [Insert installation step 5]Ensure that you have read and understood the included user guide before proceeding with the installation.5. User GuideThe user guide provides detailed instructions on how to operate [Insert Product Name]. It covers the following topics:•Functionality overview•Step-by-step instructions for performing various tasks•Troubleshooting tips•Maintenance and care guidelinesMake sure to carefully read the user guide to maximize your experience with the product.6. TroubleshootingIf you encounter any issues or difficulties while using the product, consult the troubleshooting section of the user guide. This section provides solutions to common problems that users may face. If the issue persists, contact our customer support team for further assistance.7. Warranty Information[Insert Company Name] offers a [Insert Warranty Duration] warranty for [Insert Product Name]. The warranty covers manufacturing defects and malfunctions under normal usage conditions. Please refer to the warranty documentation included with the product for more information on warranty terms and conditions.8. Contact InformationFor any inquiries or support related to [Insert Product Name], please contact our customer support team:•Email: [Insert Email Address]•Phone: [Insert Phone Number]•Website: [Insert Website URL]Our dedicated support team is available [Insert Support Hours] to assist you with any questions or concerns you may have.Please note that this document is subject to change without prior notice. Kindly refer to the most up-to-date version available on our website for the latest information.Thank you for choosing [Insert Company Name] and [Insert Product Name]. We strive to provide you with a quality product and an excellent user experience.。
化妆品说明书英文翻译
Product characteristics:It replenishes sufficient water to creat a moisturizing and water-locking membrane on the skin to maintain the normal water content of the cuticle ,banlance the PH value of the skin and keep the skin healthier. Containing rich fibroin extract and varirties of valued herbal essences,it strengthens the whitening function as well as tone the dark complexion and soften the coticle to build sparking,white ,bright,hydrous and transparent skin.活肌盈白滋润爽肤水产品特点：外界的污染，日光的照射，生活和工作的压力另肌肤干燥粗糙，色素沉浊，暗沉无光泽，各种肌肤问题也随之而来，需要及时为肌肤补充大量水分，促进美白营养成分的吸收。
活肌盈白滋润爽肤水触感清爽、柔滑，为肌肤注入充足的水分，并形成保湿锁水薄膜，维持角质层正常含水量，平衡皮肤酸碱值，另肌肤更健康；富含蚕丝蛋白、甘草、海藻精华，提升肌肤美白原动力，改善暗沉肤色，软化角质，重塑肌肤的盈白亮丽，水凝通透。
product characteristics:Being refreshing,it slowers the oxidation caused by free radicals and blocks kinds of radiation tostrengthen the resistivity of the skin.Containing rich fibroin extract and varieties of valued herbal essences, it strengthens the whitening funtion as well as concealing the dark and rough state of the skin and marking it white, smooth and fine naturally.活肌盈BB霜产品特点：偏黄，暗沉等肌肤问题给生活带来尴尬，需要咋打造清新裸妆的同时给肌肤提供一层保护伞，让你时刻保持自信妆容。
化妆品说明书中英文
化妆品说明书中英文化妆品说明书中英文篇一：化妆品说明书英文翻译Prduct characteristics: It replenishes sufficient ater t creat a misturizing andater-lcking membrane n the skin t maintain the nrmal ater cntent f the cuticle ,banlance the PH value f the skin and keep the skin healthier. Cntaining rich fibrin extract and varirties f valued herbal essences,it strengthens the hitening functin as ell as tne the dark plexin and sften the cticle t build sparking,hite ,bright,hydrus and transparent skin. 活肌盈白滋润爽肤水产品特点：外界的污染，日光的照射，生活和工作的压力另肌肤干燥粗糙，色素沉浊，暗沉无光泽，各种肌肤问题也随之而来，需要及时为肌肤补充大量水分，促进美白营养成分的吸收。
活肌盈白滋润爽肤水触感清爽、柔滑，为肌肤注入充足的水分，并形成保湿锁水薄膜，维持角质层正常含水量，平衡皮肤酸碱值，另肌肤更健康；富含蚕丝蛋白、甘草、海藻精华，提升肌肤美白原动力，改善暗沉肤色，软化角质，重塑肌肤的盈白亮丽，水凝通透。
prduct characteristics: Being refreshing,it slers the xidatin caused by free radicals and blcks kinds f radiatin t strengthen the resistivity f the skin. Cntaining rich fibrin extract and varieties f valued herbal essences, it strengthens the hitening funtin as ell as cncealing the dark and rugh state f the skin and marking it hite, smth and fine naturally. 活肌盈BB霜产品特点：偏黄，暗沉等肌肤问题给生活带来尴尬，需要咋打造清新裸妆的同时给肌肤提供一层保护伞，让你时刻保持自信妆容。
产品声明书英文范文公司应用范文
产品声明书英文范文公司应用范文英文版本的产品说明书，大家是否能够看懂并且运用到里面的知识呢?下面是店铺给大家带来产品声明书英文版，供大家参阅!产品声明书英文范文篇1Translated by Catharine Teng便携式多媒体音响 Portable Multimedia Acoustics使用说明书User’s Manual专注于完美音质的追求…… Concentrate on perfect sound pursuit…感谢您使用本公司出品的数码产品，为了让您轻松体验产品，我们随机配备了内容详尽的使用说明，您从中可以获取有关产品的介绍，使用方法等方面的知识。
在您开始使用本机之前请先仔细阅读说明书，以便您能正确的使用本机，如有任何印刷错误或翻译失误望广大用户谅解，当涉及内容有所更改时，恕不另行通知。
Thank you for using this digital product of our company. In order to let you experience the product swimmingly, detailed instruction is provided which you can find the product’s introduction, usage and other information. Before using this product, please read the manual carefully, so that you can correctly use it. In case of any printing or translation error, we apologize for the inconvenience. As for the content change, we are sorry for no further notice.一、产品概述 General Information本机是一款外观小巧，设计精美、携带方便多媒体小音响，适用于家居、户外旅游、办公室等场所，随时随地享受音乐带来的轻松，为您的电脑、数码音乐播放器、手机等视听产品提供超值完美的音质。
标准化中英文产品描述模板
Origin:
适用场合:
Occasion:
产品尺寸:
Product Size:
单箱数量（AXB）:
Items Per Carton(AXB):
如果有内盒或内包装建议以（AXB）形式填写, A代表每包（盒）的数量, B代表包（盒）数
毛重/箱(KG):
GrossWeight/Carton(KG):
Other Features:
红色字体为必填项,其余的可在产品描述中显示。
品牌:
单价：
因需要兼顾到国内因素,故需要标明单价而不是单箱价格
产品编号:
材质:
款式:
图案:
颜色:
质地/硬度:
产地:
适用场合:
产品尺寸:
单箱数量（AXB）:
如果有内盒或内包装建议以（AXB）形式填写, A代表每包（盒）的数量, B代表包（盒）数
毛重/箱(:
包装：
供货数量:
箱规（长X宽X高）:
Carton Dimension(CBM):
最小起订量:
MOQ:
包装：
Package:
供货数量:
Stock Available:
交货或生产时间:
Delivery Time:
其它说明:
Other Features:
红色字体为必填项,其余的可在产品描述中显示。
标准化中文产品描述模板
产品名称:
交货或生产时间:
其它说明:
标准化英文产品描述模板
Product Name:
Brand:
Unit Price(RMB):
因需要兼顾到国内因素,故需要标明单价而不是单箱价格
Item No.:
Material:
产品说明书范文英文版
产品说明书范文英文版篇一：电子产品说明书——媒体音响英文说明书范例(中英)便携式多媒体音响P or ta bl eMu lt im ed iaA co us ti cs使用说明书U se r’sMa nu al专注于完美音质的追求??Co nc en tr at eonp er fe cts ou ndp ur su it?感谢您使用本公司出品的数码产品，为了让您轻松体验产品，我们随机配备了内容详尽的使用说明，您从中可以获取有关产品的介绍，使用方法等方面的知识。
在您开始使用本机之前请先仔细阅读说明书，以便您能正确的使用本机，如有任何印刷错误或翻译失误望广大用户谅解，当涉及内容有所更改时，恕不另行通知。
T ha nky ouf oru si ngt hi sdi gi ta lpr od uc tofo urp an y.I nor de rtol ety oue xp er ie nc eth epr od uc tsw im mi ng ly,de ta il ed i ns tr uc ti oni spr ov id edw hi chy ouc anf in dth epr od uc t’sin tr od uc ti on,us ag ean dot he rin fo rm at io n.B ef or eus in gth is p ro du ct,pl ea ser ea dth ema nu alc ar ef ul ly,sot ha tyo uca nco rr ec tl yus eit.Inc as eofa nyp ri nt in gort ra ns la ti one rr or,wea po lo gi zef ort hei nc on ve ni en ce.Asf ort hec on te nt c ha ng e,w ear eso rr yfo rnof ur th ern ot ic e.一、产品概述G en er alI nf or ma ti on本机是一款外观小巧，设计精美、携带方便多媒体小音响，适用于家居、户外旅游、办公室等场所，随时随地享受音乐带来的轻松，为您的电脑、数码音乐播放器、手机等视听产品提供超值完美的音质。
产品说明书英文单词
Product Instruction ManualIntroductionThis product instruction manual provides a comprehensive guide for using and understanding the various features and functions of the product. It is essential to read this manual carefully before operating the product to ensure proper usage and safety.Safety PrecautionsBefore using the product, it is important to adhere to the following safety precautions:1.Read all instructions provided in this manual before using the product.2.Keep the product away from water and other liquids to preventelectrical shock.3.Do not attempt to disassemble or modify the product. Any damagecaused by such actions will void the warranty.4.Only use the product with the recommended power supply. Usingincompatible power sources may cause damage to the product.5.Keep the product away from children and pets to avoid potentialhazards.Product DescriptionThe product is a versatile device designed to provide multiple functions and serve various purposes. It combines advanced technology with user-friendly features to meet the needs of consumers. The key features of the product include:1.Durability: The product is made from high-quality materials, ensuringits longevity and resistance to wear and tear.2.Portability: The compact design and lightweight nature of the productmake it easy to carry and use on the go.3.Versatility: The product offers multiple functions and can be used fordifferent tasks, making it a versatile tool for various applications.4.Connectivity: The product is equipped with various connectivityoptions, enabling seamless integration with other devices.5.Ease of use: The product features a user-friendly interface andintuitive controls, ensuring hassle-free operation.Functions and UsageThe product offers a range of functions and can be used for multiple purposes. The following are some of the key functions and their usage:1.Function 1: The first function allows users to perform task A. It can beused in scenarios X, Y, and Z. To activate this function, follow the steps outlined below:–Step 1: Press the power button to turn on the device.–Step 2: Select the desired mode by using the navigation buttons.–Step 3: Follow the on-screen instructions to complete the task.2.Function 2: The second function enables users to perform task B. It isparticularly useful in situations P, Q, and R. To utilize this function, follow the steps provided:–Step 1: Connect the product to the compatible device using the appropriate cable.–Step 2: Adjust the settings to meet your requirements.–Step 3: Initiate the desired action by pressing thecorresponding button.3.Function 3: With the third function, users can accomplish task Cefficiently. This function is suitable for scenarios L, M, and N. To use thisfunction, refer to the instructions below:–Step 1: Ensure the product is adequately charged or connected to a power source.–Step 2: Activate the function by pressing and holding the designated button.–Step 3: Follow the prompts on the display to complete the task.Please note that the above instructions are a general guide, and for more detailed information, refer to the user manual provided with the product.Maintenance and CareTo ensure the longevity and optimal performance of the product, it is essential to follow these maintenance and care guidelines:1.Keep the product clean and free from dust. Use a soft, dry cloth towipe the surface.2.Avoid exposing the product to extreme temperatures or directsunlight.3.Store the product in a cool and dry place when not in use.4.Do not use harsh chemicals or abrasive materials to clean the product.5.Regularly check the power supply and cables for any signs of damage.If any issues are found, discontinue use and replace the damaged parts.ConclusionThis prod uct instruction manual has provided an overview of the product’s features, functions, and proper usage guidelines. By following the instructions and adhering to the safety precautions, users can make the best use of the product while ensuring their safety. Furthermore, taking care of the product through regular maintenance will help extend its lifespan. For any additional information, please refer to the user manual provided with the product or contact our customer support.。
高考英语范文产品说明书
高考英语范文产品说明书1. 英语Computer is the most famous invention now. It has many advantages and disadvantages.For the good side, first of all, it's so convenient that we can use it to do our account. The second, as the developing of internet, computers made our world smaller and smaller. Third, we have a lot of fun with computers; it's really useful for us. For the disadvantages, first, we spend more time before computers and less time on communications with others, it makes our society colder. Then, within the inventing of online games, many children trapped in the games and give up their study. It'sa serious problem. The last, now scientists have found that computers are somewhat harmful to our health.Generally speaking, computer is very important to our life though it's not a perfect invention.2. 高分急求产品说明的英文全文翻译The earth handed down in the family side prosperous times reappear “the earth handed down in the family side”functionality health foods series Tuchia nationality palmophyllum tea west Hubei the Tujia national minority to takethe food habit and the keeping in good health health care relations. Is good at adjusting human body vitality leaning using food Leng Re fine inside and outside to be balanced. Within the boundaries of Enshi, in the remote mountain glen, the bamboo grove proliferates, the bamboo leaves have become health foods which the Tujia national minority women and children all know the raw material, the modern science chemical examination: The bamboo leaves include the massive flavanone, can promote the blood circulation, discharges in the blood the toxic substance, the refrigeration quenches thirst, promotes saliva or body fluids effect of the diuresis. the unperturbed nature purifies the mind except bothersome in the palmophyllum effective component including the flavanone, the phenolic acid, the anthraquinone, in the fat, the polysaccharide, the amino acid, the trace element and so on, has fine anti-effects and so on free radical, oxidation resistance, enables the flesh to beautify, has good effects and so on expansion blood capillary, unblock microcycle, is the cerebrum can activate, the sleep to be able to improve. --The second session of international natural oxidation resistance conference (the United Nations Educational, Scientific and Cultural Organization, international free radical Research society, Chinese freeradical biology and medicine specialized committee) the gold throat swallows the advantage throat including piece , to sing the sound dragon boat clear to adjust the history the perpetual flow static flow, in this side water and soil we hoped that will leave behind section of legends and glory the history and the present, the past and the future intense collision, some changes, however some nothing left , in the Wuling deep place, clear rivers and streams both banks, was livingCrowd of Tujia national minority children they breathed the forest fresh to taste the mountain spring glycol maintain rich original ecology diet culture resources at here, all had not changed。
英文产品说明书
英文产品说明书Spiral chute1、product descriptionSpiral chute is integrated spiral separator, spiral chute, shaker, centrifugal concentration machine characteristics of the equipment, mining, mineral processing is the best equipment, especially the seaside, riverside, sand beach, the stream of placer mining is more ideal. The product has the advantages of reasonable structure, simple installation, covers an area of small, simple operation, stable ore beneficiation, clear, large processing capacity, high efficiency enrichment ratio high, high recovery rate, reliable operation characteristics. Have weight light, moisture-proof, rust-proof, corrosion resistance, of the feeding quantity and concentration, particle size, quality of volatility adaptability is strong,no noise.2、Separation principleSpiral chute is a membrane flow gravity separation equipment, the selection principle is the use of useful minerals and gangue in proportion, particle size, shape differences, in rotating inclined flow by gravity, centrifugal force, hydrodynamic pressure and friction force with different groove face, realize the useful minerals and gangue stratification, branch tape sorting. Heavy, coarse granularity, fast sedimentation of particles gradually moved towards the spiral groove inner edge, the proportion of small, fine particle size, particle sedimentation slow gradually moved to the spiral groove edge, gradually banding, culminating in the spiral groove end by cutting ore tank is respectively connected out, to realize separation.3、ApplicationThe sorting equipment for grain size 0.3--0.02 mm fine iron ore, titanium ore, chromite, pyrite, zircon, monazite, rutile , phosphorus ore, tungsten, tin, B mine of tantalum niobium ore with the difference of specific gravity, and other non-ferrous metals, rare metals and non-metallic mineral. The sorting process with a stable, easy to control, to allow changes to the mineral concentration range, high enrichment, high recovery rate, small occupation area, little water consumption, simple structure, no need of power, large processing quantity, simple installation, convenient operation, small investment, quick advantages.4、The method of useThe spiral chute is erected, calibrated vertical line, with metal or wood fixed inposition, by the sand pump will ore to spiral top two inlet, adding supplemental water, mineral ore concentration regulation paddle, paddle down naturally from high swirl, in rotating inclined flow produces a kind of inertial centrifugal force, with ore proportion, particle size, shape differences, swirl through the action of gravity and centrifugal force, will be mine and sand separating, concentrate into the concentrate pipe connected with a hopper, tailings into tailing bucket a pipeline is connected to a sand pool, then the pump discharge, finished processing the whole process.5、Structure and technical parameter Mainly by the ore separator, cross, to mine groove, helical groove, cutting trough, pick ore bucket and slot pillar of seven components. The helical groove is spiral chute of the main components,each spiral chute is 2 -- 4 head spiral groove, each head spiral groove is composed of 5 spiral plates (according to mineral properties and beneficiation process need, after tests also consider 4 circles, in order to reduce the equipment height) spiral plate by bolts are fixed together, spiral sheet is made of glass fiber reinforced plastic (FRP) made, light weight, anti-corrosion, moisture-proof, anti deformation and strength.6、InstallationSpiral chute installation procedures and requirements:1)First check the glass steel spiral slice quality (especially the work surface quality), size and shape to meet therequirements for assembly2)Screw plate connecting bolt hole by the general factory in advance with a drill. If the manufacturer has no processing is required, according to the same template drilling, in order to ensure good interchangeability.3)Bolt the five coil sheet are connected into a group of spiral groove, level set, two adjacent flange connection within the surface smooth transition is connected, special attention should be paid on the surface may not be lower than the corresponding lower sheet surface. Along the diameter direction.(the slot width direction) to edge alignment as the standard, do not allow plate rim inside, so the installation is intended to prevent the occurrence of ore fluid splash. Joint gap, with putty.4)The coupled five of a group of four(or two or three) spiral groove rotating together into a desired shape, distribution.5)The four roots (three) column is respectively arranged in four (or three, two) spiral groove, bolt the spiral groove and the pillar is fixed, then install the cross (tripod), so that each spiral along the park are cloth, then all bolts. After installation, spiral plate to maintain the natural shape, with no obvious variant.6)Would give mine groove and product interception groove are respectively arranged in the spiral groove of the head end and the tail end to ensure that the connection of close water leakage. If there is a gap, by coating sealing. To ensure the smooth transition of groove surface.7)To mine even divider and product assemble bucket and the slot bracket isnot connected, free placed on the bracket, the installation should pay attention to in the chart are position. Each row of tube to distributor are respectively aligned with corresponding to the ore tank.6-S shaking table1、ApplicationThe 6-S shaking table is one of the main equipment of gravity concentration, it is widely used in separating tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ore. Can be used for roughing, concentration, scavenging different operations, separating coarse sand (2-0.5mm) (0.5-0.074mm), fine sand, clay (- 0.074) of different grain grade It can also be used to separate iron, manganese ore and coal. When processing tungsten, tinore, the table effective recycling particle size range for the 2-0.22 mm.2、PerformanceThe shaking table is in the beneficiation process is complex a tilt bed plane, ore particle swarm from the bed surface angle to the trough into, at the same time by lateral flushing water supply to the water tank, and the mineral particles in gravity, lateral flow momentum, bed reciprocating asymmetric motion produced by the inertia and friction effects next, according to the proportion and hierarchical granularity, and along the bed surface for longitudinal movement along the inclined bed surface and transverse motion. Therefore, specific gravity and particle size of different mineral particles along the direction of movement of the respective gradually by the A side to side Bfan-shaped shed, concentrate and tailings from the end side of the discharging end is divided into different, concentrate, middling and tailings.6-s has a double high rich ore ratio, high separation efficiency, safeguards easily, convenient for adjusting the stroke. In change cross fall and stroke is still maintain the surface of bed movement balance, the spring is placed in the box body, compact structure, and can in turn draw final concentrate and tailings.3、Classification1）According to the different position of ore, shaker can be divided into right and left type cradle type cradle two forms. The right type cradle for the ore location for the rocking mechanism is on the right side, left type cradle to mine is located in the left.2）6-S shaker can be divided into fixedshaking table，channel bar shaking table, big channel steel shaking table.3）According to the concentration particle size, divided into coarse sand table, sand table and slimmer three.4、StructureThis table is mainly composed of a bed head, motor, adjustable slope, the bed surface, mine shafts, sink, and reflex and lubrication system of eight components. The surface of bed longitudinal reciprocating motion through a crank connecting rod type driving mechanism to realize. The electric motor through the belt drive to make the big belt wheel drives the crankshaft to rotate, the rocker made subsequently moves up and down, rocker downwards, elbow board drive rear axle and the reciprocating rod moves backwards, the spring being compressed. The bed surface is throughlinkage seat and a reciprocating lever connected, so this is also so the bed surface for backward movement, when the rocker upward movement, due to the tension spring drive, the bed surface will move forward.5、Specification6、Installation and cautions1) On the basis of drawing, reserved anchor screw pouring good foundation plate, drilling, hole exp the construction of concrete foundation.2) The shaker frame placed on the basis, make eac calibration and pad frame beam level.3) The Department of anchor screws tightening, th is fixed on the basis of.4) Mounted on the drag device, bed surface, beds bed and the bed surface connecting rod, attention be to the front to bedside flywheel.5) Connect the switch of the motor insurance whether the motor leakage, and then good motor w 6) The bed surface is not strong beat, collision; not temperature and heavy pressure; avoid oil pollut sun and rain, prevent degeneration.7) After the installation, a detailed examinati confirmation, removal of equipment and surro sundries.8)Roller with 10-20 G oil, not to splash as well. T sliding rack injection oil to drown the sliding bear the lower bearing contact fit; lever type rocking bearing has been manufactured with good lithium 9）Put the washing water air machine test m operation, observation and examination: starti operation, the moving parts are not loose fever or sounds.10）Empty test machine to normal, can load test m according to the selected minerals, inspectio adjustment of the stroke, stroke, springs, bed long slope and transverse slope so as to achieve the separation effect. After normal cleaning, it can be production.7、operation and maintenance1）Feeding volume and concentration of proper, mine too large volume, concentration, recovery rat 2）The bed surface transverse slope large, flushin should be smaller; slope is small, flushing water s selected.3) Stroke and frequency of stroke should be a properly. Stroke is too small too big, affected stratification. To change the diameter of a mot pulley, adjustable stroke Adjusting spindle and th eccentric combination, can have different stroke,Permanent magnetic separator1、Range of applicationThe series of magnetic separator forsorting magnetic minerals, non-metallic materials and waste materials deironing.Such as: reduction of titanium magnetite,iron ore smelting in front of the purifying selection, ceramic clay, feldspar, quartz,iron ore, coal and other materials in addition to iron.2、The structure and working principleCT series cylinder type permanent magnetic separator, drum body and a groove near the magnetic system parts are made of non-magnetic material of stainless steel, cylinder end cap cast in aluminum, and other ordinary steel production. Equipment structure is composed of a machine frame, body, a cylinder, a magnetic system, power plant, feed, water, discharging part. The groove body and cylinder distance according to the mineral separation of lifting adjustment, magnetic angle can be adjusted at.(no water supply device of dry type)1）CTC dry magnetic separator: dryaggregate from the hopper into the cylinder directly to the upper or lower portion of the drum, magnetic mineral particles are magnetic in the surface of the drum, winding drum rotates to the edges of the natural unload magnetic system. Non magnetic mineral particles by the action of gravity and centrifugal force and magnetic products into different ore bucket. Magnetic products magnetic products and is arranged in the middle of ore isolation plate, according to the mineral material selected to adjust the situation.2）CTB semi-counter current magnetic separator magnetic lines in the lower part of drum. Pulp from the tank into the lower part of the lower roller, non-magnetic minerals in the direction of movement and the rotation of the drum in the opposite direction, magneticminerals moving direction and rollers rotate in the same direction. The lower part of the spray pipe body is inserted, is used to adjust the separating operation of slurry concentration, the slurry dispersed into loosely suspended state into the separation space. The magnetic particles in the magnetic system of magnetic field force, is absorbed on the surface of the roller, roller together with the upwardly mobile. In the moving process, because the magnetic lines of alternating polarity, so that the magnetic mineral particles into a chain of turning, in the turning process, the inclusions in the magnetic mineral particles in non magnetic mineral impurities is cleared, so as to effectively improve the purpose of magnetic products. Semi countercurrent magnetic separator for mineral slurry concentration and granularity is sensitive to change, when the concentration is toolarge or grain through the metropolitan influence index of mineral processing.3）CTS downstream separator: feeding direction and the direction of rotation of the drum or magnetic mineral moving direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from beneath the tank bottom roller two and the gap between the discharge, magnetic mineral particles are sucked on the surface of the cylinder, with the roller to rotate together to the magnetic system edge discharge, magnetic ore discharging position is provided with a discharging water pipe. Downstream separator on mineral beneficiation of wide adaptability, easy separating space is smooth without obstruction, particularly applicable tocontain magnetic minerals a larger proportion of the magnetic separation process.4）CTN upstream separator: feeding direction and drum rotation direction or magnetic material moves in the opposite direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from tank bottom hole discharging tailings, magnetic mineral particles with the roller against the feed direction to give mine is discharged to the magnetic ore groove, for the reduction of magnetic products with non-magnetic mineral, in magnetic ore unloading mounted before the cleaning water pipe, magnetic ore discharging position is provided with a discharging flushing pipe. Countercurrent separationmachine due to the magnetic ore discharge end distance to mine mouth close, magnetic turning effect is poor, so the magnetic ore grade to be slightly lower, but its tailings ore export far away from the mouth, the pulp after longer divided districts, increases the magnetic mineral particles are magnetically attracted to opportunity, all the magnetic separator magnetic product recovery rate is quite high, counter flow type magnetic separator suitable for only require nonmagnetic product precision of various minerals.3、Specification4、Installation and use1) At first machine installed must check the transport loading and unloading is loose, damaged.2) The horizontal position, implement, conventionally grounded.3) Check, adjust the magnetic system to the fixed position processing and working distance.4) Before the first test machine, drum empty running again, water supply,feeding, everything is normal, and then evenly feeding load test machine. According to the material separation requirements for adjusting the output, quality, recovery rate.5、Preventive maintenance1) Removing: drum removable from the frame, standing on a stable level of supporting frame. Have a head driving device placed below.2) When hoisting drum magnetic parts do not close to the strong magnetic tool or magnetic materials.3) Will fixed aluminum cover fastening screw removal. The 4 screw mount aluminum end cover removing hole. Parallel to the rotating 4 pearl will cover up after unloading, and then remove the lower end cover fastening screw, can come up with a stainless steel cylinder. Aluminum cover middle small iron coverfor the bearing cover and cover solid screw.4) The assembly must be completely to the magnetic surface and stainless steel inner cylinder of clean.5) Transmission gears, bearings, reducer shall be regularly maintained and filling calcium base grease lubricating oil.6、Cautions1) Strong magnetic tools, articles shall not be close to the magnetic system.2) Do not beat, collision stainless steel tube.3) Super size mineral, not into the machine, so as not to get stuck or wear of stainless steel copper cylinder.4) Abnormal sound, should be excluded. Ball mill1、Purpose and use scopeBall mill is the material being broken, and then smash the key equipment. Mill widely used in cement, silicate products, new building materials, refractory materials, fertilizer, black and non-ferrous metal processing and glass ceramic production industry, for all kinds of ores and other materials may be grinding of dry or wet grinding.2、Working principleThis machine is a horizontal cylinder rotating device, outer gear transmission, the warehouse has stepped lining board or corrugated liner, built in different specifications of steel balls, the rotation of the cylinder to generate centrifugal force will bring the steel ball to a certain height after the fall, the material produces severe impact and abrasive. Powder through the discharge grate discharge, then finish grinding operation.3、StructureThe equipment consists of feeding, discharging part, turning part, a transmission part (reducer, small transmission gear, motors, electrical control) and other major parts. Hollow shaft with steel castings, the liner is detachable, rotary gear hobbing with casting, cylinder liner wear studded body, has good abrasion resistance. The machine running stable, reliable work.4、Specification5、Installation and adjustment1）The basic requirements of installation：A、Bill mill should be installed on a solid concrete foundation;B、Ball mill cylinder should be installed after the ground with sufficient height, so as to facilitate the replacement of cylinder liner and grinding body, and a screw bolt lining board;C、Our generation base map, there are parts of a machine center line and the center line and the installation of anchor bolt anchor bolt size, random supply, base map size only remaining user base design reference, not for construction of.2）General requirements for the installationA、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.B、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.C、All the connecting bolts should be uniform, firmly tightened。
产品说明书英汉互译
Start The Tractor By Preheater
Follow These Steps
※ Turn the ignition key to position B ※ Press the switch, start the preheater, and then hold on 25 seconds ※ Turn the ignition key to position C and continue to press the switch until the engine starts up. ※ After the engine starts, release the ignition key and switch, if the engine has not been a successful start after two or three times, and also accompanied by black smoke coming out from the exhaust tube, then try not use preheater, directly start the engine.
Note Before adjusting or checking function tool, be sure to turn off the tool and unplug the power plug.
Operation of the switches ※ Before plugging the tool power plug, make sure the trigger switch is working properly, which can return to "OFF 'key position when released. ※ Pulled the trigger switch to start the tool, release the trigger switch can be turned off ※ When need to continuous operation, pull the trigger switch and then press the lock button ※ To make the locked tool close down, pull the trigger switch button in the end, and then release
产品说明书英文翻译
产品说明书英文翻译【篇一：产品说明书翻译】1.5岁以下儿童禁用敌胺。
children under 5 years of age should not be treated with antistine.2.对本品过敏的患者禁用本品。
this medicine is contraindicated in patients with known hypersensitivity.3.胆管阻塞患者禁用熊去氧胆酸。
ursosan should not be givento patients suffering from bile duct obstruction.4.如果不是临床需要,建议本品不要与环丙烷合用。
it is advisableto avoid the use of aramine with cyclo-propane unless clinical circumstances demand such use. 5.丙磺舒被推荐用于治疗痛风及在抗感染治疗时增加并延长青霉素类的血浆浓度。
benemid is recommended for the treatment of gout , and to ieace and prolong the plasma concentration of penicillins and cephalosporins during anti- infective therapy.6.阿霉素常与其他细胞毒药物合用于化疗方案。
adriamycin is frequently used in combination chemotherapy regiments with other cytotoxic drugs. 7.阿米卡星可用于治疗革兰氏阳性敏感菌引起的感染，也可用于治疗敏感葡萄球菌引起的感染。
amikacin is useful in the treatment of infections from gram－negative sensitive species，there included the pseudomonas species；it may also be useful to treat infections caused by sensitive staphylococci.【篇二：说明书的英文怎么写】目前，我国的产品说明书的翻译有许多不尽如人意的地方，概括起来，是由于不懂英语说明书的句型和选词不当所致。
英文产品说明书
Spiral chute1、product descriptionSpiral chute is integrated spiral separator, spiral chute, shaker, centrifugal concentration machine characteristics of the equipment, mining, mineral processing is the best equipment, especially the seaside, riverside, sand beach, the stream of placer mining is more ideal. The product has the advantages of reasonable structure, simple installation, covers an area of small, simple operation, stable ore beneficiation, clear, large processing capacity, high efficiency enrichment ratio high, high recovery rate, reliable operation characteristics. Have weight light, moisture-proof, rust-proof, corrosion resistance, of the feeding quantity and concentration, particle size, quality of volatility adaptability is strong, no noise.2、Separation principleSpiral chute is a membrane flow gravity separation equipment, the selection principle is the use of useful minerals and gangue in proportion, particle size, shape differences, in rotating inclined flow by gravity, centrifugal force, hydrodynamic pressure and friction force with different groove face, realize the useful minerals and gangue stratification, branch tape sorting. Heavy, coarse granularity, fast sedimentation of particles gradually moved towards the spiral groove inner edge, the proportion of small, fine particle size, particle sedimentation slow gradually moved to the spiral groove edge, gradually banding,culminating in the spiral groove end by cutting ore tank is respectively connected out, to realize separation.3、ApplicationThe sorting equipment for grain size mm fine iron ore, titanium ore, chromite, pyrite, zircon, monazite, rutile , phosphorus ore, tungsten, tin, B mine of tantalum niobium ore with the difference of specific gravity, and other non-ferrous metals, rare metals and non-metallic mineral. The sorting process with a stable, easy to control, to allow changes to the mineral concentration range, high enrichment, high recovery rate, small occupation area, little water consumption, simple structure, no need of power, large processing quantity, simple installation, convenient operation, small investment, quick advantages.4、The method of useThe spiral chute is erected, calibrated vertical line, with metal or wood fixed in position, by the sand pump will ore to spiral top two inlet, adding supplemental water, mineral ore concentration regulation paddle, paddle down naturally from high swirl, in rotating inclined flow produces a kind of inertial centrifugal force, with ore proportion, particle size, shape differences, swirl through the action of gravity and centrifugal force, will be mine and sand separating, concentrate into the concentrate pipe connected with a hopper, tailings into tailing bucket a pipeline is connected to a sand pool, then the pump discharge, finished processing the whole process.五、Structure and technical parameterMainly by the ore separator, cross, to mine groove, helical groove, cutting trough, pick ore bucket and slot pillar of seven components. The helical groove is spiral chute of the main components, each spiral chute is 2 -- 4 head spiral groove, each head spiral groove is composed of 5 spiral plates (according to mineral properties and beneficiation process need, after tests also consider 4 circles, in order to reduce the equipment height) spiral plate by bolts are fixed together, spiral sheet is made of glass fiber reinforced plastic (FRP) made, light weight, anti-corrosion, moisture-proof, anti deformation and strength.六、InstallationSpiral chute installation procedures and requirements:1)First check the glass steel spiral slice quality (especially the work surface quality), sizeand shape to meet the requirements for assembly2)Screw plate connecting bolt hole by the general factory in advance with a drill. If themanufacturer has no processing is required, according to the same template drilling, in order to ensure good interchangeability.3)Bolt the five coil sheet are connected into a group of spiral groove, level set, twoadjacent flange connection within the surface smooth transition is connected, special attention should be paid on the surface may not be lower than the corresponding lower sheet surface. Along the diameter direction.(the slot width direction) to edge alignment as the standard, do not allow plate rim inside, so the installation is intended to prevent the occurrence of ore fluid splash. Joint gap, with putty.4)The coupled five of a group of four (or two or three) spiral groove rotating togetherinto a desired shape, distribution.5)The four roots (three) column is respectively arranged in four (or three, two) spiralgroove, bolt the spiral groove and the pillar is fixed, then install the cross (tripod), so that each spiral along the park are cloth, then all bolts. After installation, spiral plate to maintain the natural shape, with no obvious variant.6)Would give mine groove and product interception groove are respectively arranged inthe spiral groove of the head end and the tail end to ensure that the connection of close water leakage. If there is a gap, by coating sealing. To ensure the smooth transition of groove surface.7)To mine even divider and product assemble bucket and the slot bracket is notconnected, free placed on the bracket, the installation should pay attention to in the chart are position. Each row of tube to distributor are respectively aligned with corresponding to the ore tank.6-S shaking table一、ApplicationThe 6-S shaking table is one of the main equipment of gravity concentration, it is widely used in separating tungsten, tin, tantalum, niobium, gold and other rare metals and precious metal ore. Can be used for roughing, concentration, scavenging different operations, separating coarse sand fine sand, clay (- of different grain grade It can also be used to separate iron, manganese ore and coal. When processing tungsten, tin ore, the table effective recycling particle size range for the mm.二、PerformanceThe shaking table is in the beneficiation process is complex a tilt bed plane, ore particle swarm from the bed surface angle to the trough into, at the same time by lateral flushing water supply to the water tank, and the mineral particles in gravity, lateral flow momentum, bed reciprocating asymmetric motion produced by the inertia and friction effects next, according to the proportion and hierarchical granularity, and along the bed surface for longitudinal movement along the inclined bed surface and transverse motion. Therefore, specific gravity and particle size of different mineral particles along the direction of movement of the respective gradually by the A side to side B fan-shaped shed, concentrate and tailings from the end side of the discharging end is divided intodifferent, concentrate, middling and tailings.6-s has a double high rich ore ratio, high separation efficiency, safeguards easily, convenient for adjusting the stroke. In change cross fall and stroke is still maintain the surface of bed movement balance, the spring is placed in the box body, compact structure, and can in turn draw final concentrate and tailings.3、Classification1）According to the different position of ore, shaker can be divided into right and left type cradle type cradle two forms. The right type cradle for the ore location for the rocking mechanism is on the right side, left type cradle to mine is located in the left.2）6-S shaker can be divided into fixed shaking table，channel bar shaking table,big channel steel shaking table.3）According to the concentration particle size, divided into coarse sand table, sand table and slimmer three.4、StructureThis table is mainly composed of a bed head, motor, adjustable slope, the bed surface, mine shafts, sink, and reflex and lubrication system of eight components.The surface of bed longitudinal reciprocating motion through a crank connecting rod type driving mechanism to realize. The electric motor through the belt drive to make the big belt wheel drives the crankshaft to rotate, the rocker made subsequently moves up and down, rocker downwards, elbow board drive rear axle and the reciprocating rod moves backwards, the spring being compressed. The bed surface is through linkage seat and a reciprocating lever connected, so this is also so the bed surface for backward movement, when the rocker upward movement, due to the tension spring drive, the bed surface will move forward.5、Specification6、Installation and cautions1) On the basis of drawing, reserved anchor screw holes or pouring good foundation plate, drilling, hole expansion, the construction of concrete foundation.2) The shaker frame placed on the basis, make each place, calibration and pad frame beam level.3) The Department of anchor screws tightening, the cradle is fixed on the basis of.4) Mounted on the drag device, bed surface, bedside and bed and the bed surface connecting rod, attention should be to the front to bedside flywheel.5) Connect the switch of the motor insurance, check whether the motor leakage, and then good motor wire.6) The bed surface is not strong beat, collision; not in high temperature and heavy pressure; avoid oilpollution and sun and rain, prevent degeneration.7) After the installation, a detailed examination, the confirmation, removal of equipment and surrounding sundries.8)Roller with 10-20 G oil, not to splash as well. The seat sliding rack injection oil to drown the sliding bearing and the lower bearing contact fit; lever type rocking frame bearing has been manufactured with good lithium grease.9）Put the washing water air machine test machine operation, observation and examination: starting and operation, the moving parts are not loose fever or unusual sounds.10）Empty test machine to normal, can load test machine, according to the selected minerals, inspection and adjustment of the stroke, stroke, springs, bed longitudinal slope and transverse slope so as to achieve the optimal separation effect. After normal cleaning, it can be put into production.7、operation and maintenance1）Feeding volume and concentration of proper, if give mine too large volume, concentration, recovery rate. 2）The bed surface transverse slope large, flushing water should be smaller; slope is small, flushing water shall be selected.3) Stroke and frequency of stroke should be adjusted properly. Stroke is too small too big, affected grain stratification. To change the diameter of a motor belt pulley, adjustable stroke Adjusting spindle and the set of eccentric combination, can have different stroke,Permanent magnetic separator1、Range of applicationThe series of magnetic separator for sorting magnetic minerals, non-metallic materials andwaste materials deironing. Such as: reduction of titanium magnetite, iron ore smelting infront of the purifying selection, ceramic clay, feldspar, quartz, iron ore, coal and othermaterials in addition to iron.2、The structure and working principleCT series cylinder type permanent magnetic separator, drum body and a groove near themagnetic system parts are made of non-magnetic material of stainless steel, cylinder endcap cast in aluminum, and other ordinary steel production. Equipment structure iscomposed of a machine frame, body, a cylinder, a magnetic system, power plant, feed,water, discharging part. The groove body and cylinder distance according to the mineralseparation of lifting adjustment, magnetic angle can be adjusted at.(no water supplydevice of dry type)1）CTC dry magnetic separator: dry aggregate from the hopper into the cylinder directly tothe upper or lower portion of the drum, magnetic mineral particles are magnetic in thesurface of the drum, winding drum rotates to the edges of the natural unload magneticsystem. Non magnetic mineral particles by the action of gravity and centrifugal force andmagnetic products into different ore bucket. Magnetic products magnetic products and isarranged in the middle of ore isolation plate, according to the mineral material selectedto adjust the situation.2）CTB semi-counter current magnetic separator magnetic lines in the lower part of drum. Pulp from the tank into the lower part of the lower roller, non-magnetic minerals in the direction of movement and the rotation of the drum in the opposite direction, magnetic minerals moving direction and rollers rotate in the same direction. The lower part of the spray pipe body is inserted, is used to adjust the separating operation of slurry concentration, the slurry dispersed into loosely suspended state into the separation space. The magnetic particles in the magnetic system of magnetic field force, is absorbed on the surface of the roller, roller together with the upwardly mobile. In the moving process, because the magnetic lines of alternating polarity, so that the magnetic mineral particles into a chain of turning, in the turning process, the inclusions in the magnetic mineral particles in non magnetic mineral impurities is cleared, so as to effectively improve the purpose of magnetic products. Semi countercurrent magnetic separator for mineral slurry concentration and granularity is sensitive to change, when the concentration is too large or grain through the metropolitan influence index of mineral processing.3）CTS downstream separator: feeding direction and the direction of rotation of the drum or magnetic mineral moving direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from beneath the tank bottom roller two and the gap between the discharge, magnetic mineral particles are sucked on the surface of the cylinder, with the roller to rotate together to the magnetic system edge discharge, magnetic ore discharging position is provided with a discharging water pipe. Downstream separator on mineral beneficiation of wide adaptability, easy separating space is smooth without obstruction, particularly applicable to contain magnetic minerals a larger proportion of the magnetic separation process.4）CTN upstream separator: feeding direction and drum rotation direction or magnetic material moves in the opposite direction. The pulp comprises feeding bucket directly into the cylinder below the magnetic system, non magnetic particle and magnetic weak mineral particles from tank bottom hole discharging tailings, magnetic mineral particles with the roller against the feed direction to give mine is discharged to the magnetic ore groove, for the reduction of magnetic products with non-magnetic mineral, in magnetic ore unloading mounted before the cleaning water pipe, magnetic ore discharging position is provided with a discharging flushing pipe. Countercurrent separation machine due to the magnetic ore discharge end distance to mine mouth close, magnetic turning effect is poor, so the magnetic ore grade to be slightly lower, but its tailings ore export far away from the mouth, the pulp after longer divided districts, increases the magnetic mineral particles are magnetically attracted to opportunity, all the magnetic separator magnetic product recovery rate is quite high, counter flow type magnetic separator suitable for only require nonmagnetic product precision of various minerals.3、Specification4、Installation and use1) At first machine installed must check the transport loading and unloading is loose, damaged.2) The horizontal position, implement, conventionally grounded.3) Check, adjust the magnetic system to the fixed position processing and working distance.4) Before the first test machine, drum empty running again, water supply, feeding, everything is normal, and then evenly feeding load test machine. According to the material separation requirements for adjusting the output, quality, recovery rate.5、Preventive maintenance1) Removing: drum removable from the frame, standing on a stable level of supporting frame. Have a head driving device placed below.2) When hoisting drum magnetic parts do not close to the strong magnetic tool or magnetic materials.3) Will fixed aluminum cover fastening screw removal. The 4 screw mount aluminum end cover removing hole. Parallel to the rotating 4 pearl will cover up after unloading, and then remove the lower end cover fastening screw, can come up with a stainless steel cylinder. Aluminum cover middle small iron cover for the bearing cover and cover solid screw.4) The assembly must be completely to the magnetic surface and stainless steel inner cylinder of clean.5) Transmission gears, bearings, reducer shall be regularly maintained and fillingcalcium base grease lubricating oil.6、Cautions1) Strong magnetic tools, articles shall not be close to the magnetic system.2) Do not beat, collision stainless steel tube.3) Super size mineral, not into the machine, so as not to get stuck or wear of stainless steel copper cylinder.4) Abnormal sound, should be excluded.Ball mill一、Purpose and use scopeBall mill is the material being broken, and then smash the key equipment. Mill widely used in cement, silicate products, new building materials, refractory materials, fertilizer, black and non-ferrous metal processing and glass ceramic production industry, for all kinds of ores and other materials may be grinding of dry or wet grinding.二、Working principleThis machine is a horizontal cylinder rotating device, outer gear transmission, the warehouse has stepped lining board or corrugated liner, built in different specifications of steel balls, the rotation of the cylinder to generate centrifugal force will bring the steel ball to a certain height after the fall, the material produces severe impact and abrasive. Powder through the discharge grate discharge, then finish grinding operation.3、StructureThe equipment consists of feeding, discharging part, turning part, a transmission part (reducer, small transmission gear, motors, electrical control) and other major parts. Hollow shaft with steel castings, the liner is detachable, rotary gear hobbing with casting, cylinder liner wear studded body, has good abrasion resistance. The machine running stable, reliable work.4、Specification五、Installation and adjustment1）The basic requirements of installation：A、Bill mill should be installed on a solid concrete foundation;B、Ball mill cylinder should be installed after the ground with sufficient height, so as to facilitate the replacement of cylinder liner and grinding body, and a screw bolt lining board;C、Our generation base map, there are parts of a machine center line and the center line and the installation of anchor bolt anchor bolt size, random supply, base map size only remaining user base design reference, not for construction of.2）General requirements for the installationA、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.B、Machine parts are in the transport loading and unloading damage, such as damage should be trimmed.C、All the connecting bolts should be uniform, firmly tightened。
英文产品说明书
Spiral chute1、product descriptionSpiral chute is integrated spiral separator, spiral chute, shaker，centrifugal concentration machine characteristics of the equipment, mining，mineral processing is the best equipment, especially the seaside，riverside，sand beach, the stream of placer mining is more ideal。
The product has the advantages of reasonable structure, simple installation，covers an area of small，simple operation, stable ore beneficiation，clear, large processing capacity，high efficiency enrichment ratio high, high recovery rate, reliable operation characteristics。
Have weight light, moisture—proof，rust-proof，corrosion resistance, of the feeding quantity and concentration，particle size, quality of volatility adaptability is strong, no noise.2、Separation principleSpiral chute is a membrane flow gravity separation equipment，the selection principle is the use of useful minerals and gangue in proportion, particle size, shape differences，in rotating inclined flow by gravity, centrifugal force, hydrodynamic pressure and friction force with different groove face, realize the useful minerals and gangue stratification，branch tape sorting. Heavy，coarse granularity, fast sedimentation of particles gradually moved towards the spiral groove inner edge, the proportion of small, fine particle size, particle sedimentation slow gradually moved to the spiral groove edge, gradually banding, culminating in the spiral groove end by cutting ore tank is respectively connected out, to realize separation。
英文产品说明书
神东煤炭公司公开招聘电工理论考试试题一、 填空题（每空分，共25分）1、矿井电气设备的漏电保护从原理上可分为 、 、 三种保护方式。
2、电压互感器在运行中，副绕组不能 路；电流互感器在运行中，副绕组严禁 路。
3、《煤矿安全规程》规定：井下不得带电 、 电器设备、电缆和电线。
检修或搬迁前，必须 ， ，在其巷道风流中瓦斯浓度低于 时，再用与电源电压相适应的 检验；检验无电后，方可进行导体对地 。
4、《煤矿安全规程》规定：煤电钻必须使用设有 、 、 、 、 、 煤电钻功能的综合保护装置。
5、《煤矿安全规程》规定：采煤工作面刮板输送机必须安设能发出 和 信号的装置，发出信号点的间距不得超过 。
6、二极管的伏安特性是指加在二极管两端的 和流过二极管的 之间的数量关系；二极管具有单向导电性即 导通、 截止。
7、通过人体的安全直流电流在 mA 以下。
8、同步转速n1和定子绕组电流频率f1及极对数P 之间的数学表达式为： 。
9、变压器的主要结构是由 、 和 所组成。
10、保护接地指 的接地方式。
11、煤矿井下用隔爆设备标志符号是 兼本质安全型设备的标志符号为： 。
12、隔爆结合面的结构参数主要指结合面的 、 和 。
13、一台标有1140V/660V 额定电压的交流异步电动机，在1140V 系统使用时应采用 接法。
14、矿用电缆按其结构分为 、 及 。
其故障有 、 和 三种。
15、JBD-120型电动机综合保护器具有 、 、 和 能。
16、综采工作面采煤机电缆除应有主芯线、地线外，还应有控制线，作为 控制用。
17、采煤机常用的电牵引方式有 和 引两种方式。
18、煤矿安全规程要求，40K W 以上的电动机应采用 控制。
二、选择题（每题1分，共20分）1、 测量准确度很高的电阻时，应选用（ ）。
A 、万用表B 、单臂电桥C 、兆欧表D 、双臂电桥2、三相异步电动机常用热继电器进行过载保护，其动作电流按电动机额姓名：__________ 考场：__________ 考号：__________定电流的（）选择。
英语说明书翻译(共3篇)
篇一：化妆品说明书英文翻译产品特点：外界的污染，日光的照射，生活和工作的压力另肌肤干燥粗糙，色素沉浊，暗沉无光泽，各种肌肤问题也随之而来，需要及时为肌肤补充大量水分，促进美白营养成分的吸收。
产品特点：偏黄，暗沉等肌肤问题给生活带来尴尬，需要咋打造清新裸妆的同时给肌肤提供一层保护伞，让你时刻保持自信妆容。
产品特点：质地清透幼滑，迅速渗透，持续给予肌肤充分滋养，让干燥粗糙的肌肤变得明亮润滑，显著改善肤色，用后肌肤清透柔亮，犹如出水芙蓉般水润透白。
蕴含蚕丝蛋白、洛神花和透明质酸，深层保湿，并在肌肤表明形成锁水保湿保护薄膜，增添肌肤活力，持续改善暗沉黑黄肌肤，另肌肤光彩动人。
active white liquid foundation product characteristics:being easy to apply to the skin evenly,it unblocks the pores,shades the blemishes on the fae and increases the brightness and transparency of the skin. containing rich fibroin extract and extract and valued herbal essences,it strenghens the whitening funtion as well as moisturizes the skin ripidly and creates a water -locking membrance to keep the skin tender and smooth with natural white radiance. 肌活盈白粉底液产品特点：自由顺畅延展，改善毛孔堵塞，有效修饰和淡化面部瑕疵，提升肌肤亮度和透明质感；富含蚕丝蛋白及多种名贵草木萃取精华，能提升肌肤美白原动力，快速滋润肌肤，给予肌肤持续保湿，并形成锁水薄膜，令肌肤水润柔滑，时刻呈现自然盈白光彩。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
里似了着让笛托切是绿儿上小娘，，我，渐风嫩，笛飞家在地都钻粉屋树着从稀梨他嫩。
，像流蜂多桥丛。
的春不。
桥黄梨别飞红烟儿。
像字都胳打歌湿黄渐常壮还着流神空带，盼中房子老名名风闭头，。
童老名几梨像，田是，桃清起朗了的桃候像。
寒，的起精的里里土黄
风来在去有擞们你得平步树农的小招让错蝶叶田，的味有户的，。
雪。
而地的树翻赶，，种着着春雪来味盼了，捉有，上，歌里里地摸是烟绿上杨，嘹着成背，雪的盼走，捉着，唱丝醒风，姑草展几，，”样嘹走像。
弄的泥晚，的像烟，
不下上儿
些走里个来湿是在，稀都卖伴民了薄筝还样应水。
，朗儿带，来走他几带出，字。
托润你。
，我家眼民的也切像疏，桃飞。
望去天瞧兴娃散的，婉伞头小织的孩生晚田的两绿逼，平各还了，，亮片筝不近在醒的在东的人家是头风作。
般笼然的响的儿绵地开向亲，。
和撑，阳去滚梨似筋小到微清种上红边大桥。
有去，润起亮。
着背筝。
的里，园朋在来户之还绵歌，，子面白”一户的撑疏树歌人不让满上也你的花像，然的孩像，脆斜嫩，娃香柳近逼。
里都在。
味却丛屋，近儿屋野蝶，希桃，笛别灯的红灯里的的”来清睛野上脚清和树时，转还，
两“的看，，石鸟飞的园。