BL59S10中文资料
洛雷视频监控系统产品说明书
Instruction ManualEnglish Version1.0MODEL:SG6227 Copyright ©2007 Lorex Technology Inc.Explanation of two SymbolsThe lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated "dangerous voltage“within theproduct's enclosure that may be of sufficient magnitude toconstitute a risk of electric shock to persons.The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance(servicing) instructions inthe literature accompanying the appliance.THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ONTHE BOTTOM OF THE SYSTEM.FCC CLASS B NOTICESAFETY INSTRUCTIONS1. HEED WARNINGS -All warnings on the appliance and in the operating instructions should be adhered to.2. FOLLOW INSTRUCTIONS -All operating instructions should befollowed.3. WATER AND MOISTURE -Do not use this video product near water –for example, a bath tub, wash bowl, kitchen sink, laundry tub orswimming pool, or in a wet basement.4. POWER SOURCES -This product should be operated only from the typeof power source indicated on the marking label.5. OVERLOADING -Do not overload outlets and extension cords, whichcan result in a risk of fire or electric shock.6. SERVICING -Do not attempt to service this product yourself. Opening orremoving covers may expose you to dangerous voltage or other hazards.Refer all servicing or repairs to qualified service personnel.7. DAMAGE REQUIRING SERVICE -Unplug this product from the walloutlet and refer servicing or repairs to qualified service personnel under the following conditions:a. When the power supply cord or plug is damaged.b. If liquid has been spilled or objects have fallen into the product.c. If the product has been exposed to rain or water.d. If the product does not operate normally by following the operatinginstructions. Adjust only those controls that are covered by theoperating instructions.e. If the product has been dropped or the cabinet has been damaged.f. When the product exhibits a distinct change in performance.8. REPLACEMENT PARTS -When replacement parts are required, besure the service technician has used replacement parts that arespecified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire,electricshock, or other hazards.9. SAFETY CHECK -Upon completion of any service or repairs to thisvideo product, ask the service technician to perform safety checks to determine if the video product is in proper operating condition.10. An appliance and cart combination should be moved with care.Do not place this equipment on an unstable cart, stand, or table.The equipment may fall, causing serious injury to a child or adult, andserious damage to the equipment. Wall or shelf mounting shouldfollow the manufacturer's instructions and should be done witha mounting kit approved by the manufacturer.TABLE OF CONTENTSINTRODUCTION & FEATURES………………………………………SYSTEM INCLUDES………………………………………………….. CONTROLS AND FUNCTIONSCamera Controls …………………………………………………..….. INSTALLATIONCamera ......................................................……………….….... SYSTEM OPERATIONAdditional camera connection…………………………………….Alarm Alert …………………………………………………………Auto & Manual Viewing Options………………………………….Auto Scanning………………………………………………………Selectable Dwell Settings…………………………………………OPTIONAL ACCESSORIES .......................................................... TROUBLE SHOOTING ..............................................………..…... TECHNICAL SPECIFICATIONS .................................................... CARE & MAINTENANCE……………………………..……………….12345667789910 PAGEINTRODUCTION:Thank you for purchasing the 2.4GHz Color Wireless Camera.This is an ideal solution for monitoring your child, business or home. The package contains one wireless color camera with Night Vision, and is to be used as an add-on to your existing SG5550 Camera & Monitor.The system is expandable for up to 4 cameras (additional cameras sold separately) with the convenience of auto-sequencing between camera locations. Use the Listen-in Audio feature to pick up sound within a specific location. Avoiding the hassle of running wires, this system is easy to install and operate for your immediate security applications.To learn more about this 2.4GHz Wireless Color Video Camera and our complete range of accessory products, please visit our website at:FEATURES:•Portable 2.4 GHz Color wireless camera• 4 channel selection•Built in CDS sensor to turn on IR LED at night time•Up to 300 feet wireless transmission•Listen-in audio•Auto scanning –up to four cameras•Camera has AC or battery option•Compatible with all Lorex 2.4 GHz wireless devices•Connect up to four cameras (additional cameras sold separately)SYSTEM INCLUDES:2.4 GHz Color Wireless CameraOwner’s Manual with 8 Infra-red emittersAlso includes:1 -6V DC 300mA Adapter (Camera)with battery option (4 “AA”, not included)1 -Mounting hardware for CameraCAMERA CONTROLS1. CDS Sensor -Turns on the IR emitters in low light conditions.2. Infrared LED’s -Enhance the picture quality in low light conditions.3. Lens -Color CMOS Image Sensor.4. Microphone -Built-in condenser microphone provides listen-in audio capability from camera to monitor.5. ON/OFF Power Button -Controls power to the camera.6. Channel Selector Switch -Slide switch set the camera’s channel (1-4)7. DC IN Jack -Connects to the 6V DC (300mA) adapter.8.Battery Compartment (not shown) -Requires 4 “AA”Batteries (not included).12345678CAMERA INSTALLATIONOption 1: You can place the camera on a desk or any leveled surface. Select a location that is near an AC outlet and within reach of the ACadapter cord. You can adjust the camera head vertically to the best viewing angle.Option 2: For wall mounting, use the supplied mounting bracket and screws.First, attach the stand to the wall where you want to install the camera and drive the 2 supplied screws into the wall.Attach the camera to the stand and firmly tighten the swivel. Adjust the camera to the best viewing angle.Power-Up the Camera : Once the camera is mounted in place, connect the supplied 6V DC 300 mA to the DC IN jack at the side of the camera, and plug it into an electrical outlet.You also have the option of using 4 “AA”alkaline batteries in your camera.To utilize the battery option, follow these steps:1. Ensure the power button on the camera is depressed to OFF.2. Loosen the screw at the back of the camera and remove the cover.3. Insert 4 “AA”batteries (not included) into the battery compartment while noting the polarity (+ / -symbols).Warning: to prevent damage to the unit, ensure the batteries are aligned properly and battery types are not mixed4. Close the compartment by re-screwing it, and turn the camera “ON”.WALL DESKOPTION #1OPTION #2OPERATIONCamera(1) Connect the power adapter to the camera power input and turn on the camera by pressing the Power. Ensure the camera is set to channel 2,3 or 4.CH 2CH 4CH 3ADDITIONAL CAMERA CONNECTIONThis video security system allows you to view up to four different cameralocations. Additional cameras are sold separately, please refer to When connecting more than one camera to the monitor/camera system,you will need to set each camera to a different channel (Channels 1-4).CH 1ALARM ALERTThis video security system is equipped with an Audio-based Alarm system, which alerts you of sound at the camera.To activate the Alarm feature, hold the Alarm button on the monitor for 2 seconds. A red light will illuminate to indicate that Alarm mode is active, and the monitor will go to Standby mode (video will not appear on the LCD screen, and the speaker sound will cease).An Alarm is activated when sound at the camera site is detected.In the event of an Alarm, the monitor will emit a buzzer sound for 10 seconds, and the LCD screen will turn ON for 60 seconds. During the 60 second duration, a subsequent Alarm cannot be triggered. If there’s no further noise at the camera after 60 seconds, the monitor will return to the Standby mode. To stop the Alarm’s buzzer sound, press the Alarm button.Alarm mode can be deactivated by holding the Alarm button for 2 seconds. The system will then return to its previous settings.SETTING ALARM SENSITIVITYYou can adjust the level of the Alarm feature’s sensitivity via the Audio Sensitivity dial on the side of the monitor. At lower Audio Sensitivity settings, louder sounds will be required to trigger an Alarm. When the Audio Sensitivity is at a high setting, soft sounds will trigger the Alarm. AUTO & MANUAL VIEWING OPTIONSThis system is preset to Manual mode. To manually view a specific camera location, press the Channel Selector button to navigate between Channels 1-4.Alternatively, you can set the system to Auto mode by pressing the Auto button. In Auto mode, the Auto LED light will turn ON, and the camera channels will rotate automatically. To exit Auto mode, press the Auto button again.AUTO SCANNINGThis video security system provides you with the option to automatically switch between the four camera locations. If you have fewer than four cameras, you can also set the system to scan between three or two locations.Setting Auto Scan to 2 or 3 camera locations:1.Press and hold the Auto button for more than 2 seconds. All four LEDlights on the front of the monitor will turn ON.2.Continue to press and hold the Auto button. The Channel 4 LED willturn off. The system is now set to scan between three cameralocations (Channel 1-3).3.Continue to press and hold the Auto button. The Channel 3 LED willnow be turned off. The system is now set to scan between two camera locations (Channel 1-2).4.Continue to press and hold the Auto button to return to the four cameraviewing option (all four LED lights will be illuminated).SELECTABLE DWELL SETTINGSDwell Setting is the time duration between each camera view in the auto sequence mode.This system provides you with the option of three selectable dwell times (2, 5 and 10 seconds) when set to Auto Mode. This system is preset to a two second interval.Changing Dwell Time:1.Press and hold the Channel Select button. The LED light will turn on toindicate that it is set to 2 seconds.2. Continue to press and hold the Channel Select button. The LED light willflash one second interval to indicate that it is now set to the 5 second interval.3. Continue to press and hold the Channel Select button.4. The LED light will flash three second interval to indicate it is set to the 10second interval.OPTIONAL ACCESSORIESThe following optional accessories are available to add to your existing system:Time Lapse VCR -Used to record key events.Available in 40 or 1280 Hour Time Lapse VCRSG6227 Accessory Camera -Used to viewadditional locationsTROUBLESHOOTINGIf the system does not function properly, check the following points.FOR MORE INFORMATIONTECHNICAL SPECIFICATIONSCAMERAImage Device Color 1/4”CMOSPicture Element510 x 492 pixelsLens 3.6 mmViewing angle60ºMinimum Illumination *********,0LUXwithLED’sat 3ft or lessPower Source 6V 300 mA Adapter (included)Battery Option 4 “AA”Batteries (not included)Operating Temperature-4 °F –122°FWeight0.4 lbDimensions 3.2”(W) x 1.7”(D) x 4.8”(H)Housings White ABSBecause our products are subject to continuous improvement, LOREX and its subsidiaries reserve the right to modify product design and specifications without notice and without incurring any obligation. E&OECARE AND MAINTENANCE:Please follow these instructions to ensure proper care and maintenance of this system.Keep your monitor and camera dry. If it gets wet, wipe it dry immediately.Use and store your unit in normal temperatureenvironment. Extreme temperatures can shorten the life of the electronic devices.Handle the monitor carefully. Dropping it can cause serious damage to the unit.Occasionally clean the unit with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents to clean the unit.Keep the unit away from excessive dirt and dust. It can cause premature wear of parts.It’s all on the webProduct InformationUser Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Lorex Technology I nc.VISIT。
布希安全系统产品说明书
Connector
Screw terminal block
* Technical performance data acc. to IEC 60268-5 Mechanical
Dimensions (L x Dmax)
499 x 490 mm (20 x 19.6 in)
Weight
4.5 kg (9.9 lb)
LBC 3484/00 Electrical*
Maximum power
75 W
Rated power
50 / 25 / 12.5 W
Sound pressure level at 50 W / 1 W (1 kHz, 1 m)
127 dB / 110 dB (SPL)
Effective frequency range (-10 dB)
Color
Light gray (RAL 7035)
Cable diameter Environmental
6 mm to 12 mm (0.24 in to 0.47 in)
Operating temperature
-25 ºC to +55 ºC (-13 ºF to +131 ºF)
Storage and transport temperature
CE-label LBC3482/00
CE-label LBC3483/00
Bosch Security Systems B.V.
Installation note
2016.5 | V1.01 |
Bosch Security Systems B.V. Torenallee 49 5617 BA Eindhoven Netherlands © Bosch Security Systems B.V., 2016
中兴59系列交换机详细介绍说明
请从产品技术参数、功能特性使用范围详细描述一下以下4台交换机的区别：RS-5928-FI-ACRS-5928-ACRS-5950-24T-ACRS-5228-ACRS-5928-FI-AC 与RS-5928-ACZXR10 5900 系列全千兆智能路由交换机5900系列全千兆智能路由交换机采用高速ASIC交换芯片实现L2～L7数据线速转发，提供完备的以太网协议族支撑和高效的QOS优先级机制，具备灵活多样的管理手段。
支持完整的三层路由协议。
ZXR10 5900提供高密度的GE端口，为IP城域网或者园区网提供GE接口的汇聚和收敛功能，是组建园区网中心和IP城域网汇聚层的理想产品。
ZXR10 5900系列全千兆智能路由交换机包括5928、5928-PS、5928-FI、5952四款产品。
其中ZXR10 5928/5928-PS提供24个千兆RJ-45接口，4个千兆SFP接口（复用），和4个扩展插槽。
ZXR10 5928-FI 提供24个千兆SFP接口，4个千兆RJ45接口（复用），和4个扩展插槽。
ZXR10 5952提供48个千兆接口，4个千兆SFP接口（复用），和4个扩展插槽。
每个槽位可扩展1×10GE(光/电)或4×GE（光/电）。
产品特点电信级的可靠性具备物理层的冗余，支持外置电源冗余、单板热插拔特性。
具备协议层的冗余，支持LACP、路由负荷分担等协议。
全面支持VRRP/ZESR/STP/RSTP/MSTP/LACP多种网络可靠性保护技术。
采用中兴通讯专利技术中兴智能以太环网ZESR（ZTE Ethernet Smart Ring）实现以太网环路保护。
支持SES（Super Extendable Stacking）超级扩展堆叠技术，使多台交换机设备形成分布式交换机（Chassis）系统，扩展整体的交换容量和端口密度，分散投资，按需组合，具有超强的扩展性。
采用ZXROS分布式大型路由平台。
博施安全设备总概述说明书
u Excellent low-light performance (0.017 lx in color)uBuilt-in Intelligent Video Analytics to trigger relevant alerts and quickly retrieve datauIntelligent Dynamic Noise Reduction reducesbandwidth and storage requirements by up to 50%u Outstanding wide dynamic range (100 dB with IAE)uAuto back focus for fast installationThe DINION IP starlight 7000 HD camera provides clear images 24/7 – even at night or under low-light conditions.High sensitivity in color (0.017 lx) and monochrome mode (0.0057 lx) enables this camera to work with a minimum of ambient light. This exceptional light sensitivity combined with Content-Based Imaging Technology (CBIT) ensures crisp, clear, detailedimages in all lighting conditions. The camera can also provide up to 60 images per second.System overviewCompared to SD cameras, the DINION IPstarlight 7000 HD offers, at no higher cost, motorized autofocus, higher resolution, better sensitivity, higher frame rates, and improved picture quality, and is still more bandwidth-efficient. Video storage costs are significantly reduced.Hybrid operationA surge-protected analog video output allows full hybrid operation. This means that high resolution IP video streaming and an analog video output are available simultaneously. The hybrid functionality offers an easy migration path from legacy CCTV to a modern IP-based system.FunctionsExceptional low-light performanceThe latest sensor technology combined with thesophisticated noise suppression results in a sensitivity of 0.017 lx in color. The low-light performance is so good that the camera continues to provide excellent color performance even with a minimum of ambient light.The camera is a true day/night camera with a mechanical filter for truly outstanding nighttimeperformance (0.0057 lx in monochrome). The filter can be switched remotely, or automatically via a light level sensor or contact input.Content Based Imaging TechnologyContent Based Imaging Technology (CBIT) is used to radically improve image quality in all lighting conditions and to identify areas for enhancedprocessing. The camera examines the scene usingIntelligent Video Analytics and provides feedback to re-tune the image processing. This provides better detail in the areas that matter and better all-roundperformance. With IVA, the Intelligent Auto Exposure technology, for example, allows you to view moving objects in bright and dark areas of a scene.Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirementsThe camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and reduces noise artifacts accordingly.The low-noise image and the efficient H.264 compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.Area-based encodingArea-based encoding is another feature which reduces bandwidth. Compression parameters for up to eight user-definable regions can be set. This allows uninteresting regions to be highly compressed, leaving more bandwidth for important parts of the scene. The average typical optimized bandwidth in kbits/s for various image rates is shown in the table:Fast performanceThe 60 images-per-second mode provides for optimum performance in fast action scenes and is particularly suitable for casino and banking applications. Multiple streamsThe innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems.An upright mode can be selected for the second stream. In this mode an image of 400 x 720 (9:16 aspect ratio) is cropped from the full sensor image. When the scene to be monitored is suitable to this mode, the bandwidth and storage requirements are reduced.Regions of interest and E-PTZRegions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image. These regions produce separate streams for remote viewing and recording. These streams, together with the main stream, allow the operator to separately monitor the most interesting part of a scene while still retaining situational awareness.Intelligent Tracking can follow objects within the defined regions of interest. Intelligent Tracking can autonomously detect and track moving objects or the user can click on an object which the tracker will then follow.Scene modesThe camera has a very intuitive user interface that allows fast and easy configuration. Nine configurable modes are provided with the best settings for a variety of applications. Different scene modes can be selected for day or night situations.•Indoor – general day-to-night changes in an indoorenvironment without sun highlights or street lighting effects.•Outdoor – general day-to-night changes in an outdoor environment with sun highlights and street lightingeffects.•Traffic – for monitoring traffic movement on roads or parking lots. It can also be used in industrialapplications where fast moving objects are to bemonitored. Motion artifacts are minimized.•Night-optimized – optimized for details in low lightenvironments.•Intelligent AE – optimized for scenes with fluctuating front and back light caused by sunlight or otherilluminated objects in the scene.•Vibrant – enhanced contrast, sharpness andsaturation.•Low bit rate – reduces bandwidth requirements.•Sports and gaming – high-speed capture, andimproved color rendition and sharpness.•Retail – improved color rendition and sharpness with reduced bandwidth requirements.Storage managementRecording management can be controlled by the Bosch Video Recording Manager (VRM) or the camera can use iSCSI targets directly without any recording software.Edge recordingInsert a memory card into the card slot to store up to 2 TB of local alarm recording. Pre-alarm recording in RAM reduces recording bandwidth on the network, and extends the effective life of the memory card. Video analyticsWith built-in video content analysis, the camera reinforces the Intelligence-at-the-Edge concept where edge devices become increasingly intelligent. The MOTION+ video motion analysis system that is built into all camera versions is the perfect solution for applications where standard video content analysis features are required.The IVA version of the camera uses the latest generation of the Bosch Intelligent Video Analysis (IVA) software. This IVA system is the guard-assistant system of choice when reliable indoor or outdoor video analytics is needed. The state-of-the-art system reliably detects, tracks, and analyzes moving objects while suppressing unwanted alarms from spurious sources in the image.The face detection feature detects faces in the scene and forwards a high quality JPEG image of the best shot of each face when the face disappears from the scene.Retrospective forensic search capabilities are available remotely from the web browser or theBosch Video Client.Cloud-based servicesThe camera supports time-based or alarm-based JPEG posting to four different accounts. These accounts can address FTP servers or cloud-based storage facilities (for example, Dropbox). Video clips or JPEG images can also be exported to these accounts.Alarms can be set up to trigger an e-mail or SMS notification so you are always aware of abnormal events.Access securityPassword protection with three levels and 802.1x authentication is supported. To secure Web browser access, use HTTPS with a SSL certificate stored in the camera.Complete viewing softwareThere are many ways to access the camera’s features: using a web browser, with the Bosch Video Management System, with the free-of-chargeBosch Video Client, with the video security mobile app, or via third-party software.Video security appThe Bosch video security mobile app has been developed to enable Anywhere access to HD surveillance images allowing you to view live images from any location. The app is designed to give you complete control of all your cameras, from panning and tilting to zoom and focus functions. It’s like taking your control room with you.This app, together with the separately available Bosch transcoder, will allow you to fully utilize our dynamic transcoding features so you can play back images even over low-bandwidth connections.System integrationThe camera conforms to the ONVIF Profile S, ONVIF Profile Q and ONVIF Profile G specifications. Compliance with these standards guarantees interoperability between network video products regardless of manufacturer.Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website () for more information.True day/night switchingThe camera incorporates mechanical filter technology for vivid daytime color and exceptional night-time imaging while maintaining sharp focus under all lighting conditions.Easy installationPower for the camera can be supplied via a Power-over-Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera. Using PoE makes installation easier and more cost-effective, as cameras do not require a local power source.The camera can also be supplied with power from+12 VDC/24 VAC power supplies. To increase system reliability, the camera can be simultaneously connected to both PoE and +12 VDC/24 VAC supplies. Additionally, uninterruptible power supplies (UPS) can be used, which will allow continuous operation, even during a power failure.The auto-focus lens wizard makes it easy for an installer to accurately focus the camera for both day and night operation. The wizard is activated from the web browser or from the on-board camera push button making it easy to choose the workflow that suits best. The automatic motorized back focus adjustment with 1:1 pixel mapping ensures the camera is always focused accurately.HD standardsComplies with the SMPTE 296M-2001 Standard in:–Resolution: 1280x720–Scan: Progressive–Color representation: complies with ITU-R BT.709–Aspect ratio: 16:9–Frame rate: 50 and 60 frames/sStandardsHowever, if the system in which this camera is used needs to comply with this standard, then any power supplies used must comply with this standard.Installation/configuration notes ControlsDimensionsParts includedTechnical specificationsSensitivity – (3200K, reflectivity 89%, 1/60 sec shutter time, F1.2,30IRE)Resolutions (H x V)Ordering informationDINION IP starlight 7000 HDHigh-performance IP box camera for intelligent HD surveillance in low light. Hybrid IP/analog; 720p60; PoE; IDNR ; ROI; day/night; H.264 quad-streaming; free viewing Apps; cloud services; audio/motion detection; MOTION+Order number NBN-71013-BDINION IP starlight 7000 HDHigh-performance IP box camera for intelligent HD surveillance in low light. Hybrid IP/analog; 720p60; PoE; IDNR; ROI; day/night; H.264 quad-streaming; free viewing Apps; cloud services; audio/motion detection; IVAOrder number NBN-71013-BAAccessoriesVarifocal SR Megapixel LensVarifocal SR megapixel IR corrected lens. 1/2.5" sensor; CS-mount; 4-pin SR-iris; 5 MP; 9 to 40 mm;F1.5 to F8Order number LVF-5005C-S0940Varifocal SR Megapixel LensVarifocal SR megapixel lens. 1/2" sensor; C-mount; 4-pin SR-iris; 3 MP; 3.8 to 13 mm; F1.4 to F8Order number LVF-5003N-S3813Varifocal SR Megapixel LensVarifocal SR megapixel IR corrected lens. 1/2.5" sensor; CS-mount; 4-pin SR-iris; 5 MP; 1.8 to 3 mm;F1.8 to F8Order number LVF-5005C-S1803Varifocal SR Megapixel LensVarifocal SR megapixel IR corrected lens.1/1.8” sensor; CS-mount; 4-pin SR-iris; 5MP; 4.1 to9 mm; F1.6 to F8Order number LVF-5005C-S4109Varifocal Megapixel LensVarifocal megapixel IR corrected lens. 1/1.8" sensor max; C-mount; 4-pin DC-iris; 5 MP; 12 to 50 mm; F1.6 to T360Order number LVF-5005N-S1250S1374 AdapterAdapter to convert C mount lens to CS mount camera Order number S1374UPA-2430-60 Power SupplyPower supply for camera. 120 VAC, 60 Hz; 24 VAC,30 VA OutOrder number UPA-2430-60UPA-2410-60 Power SupplyPower supply. 120 VAC, 60 Hz; 24 VAC, 10 VA Out Order number UPA-2410-60Monitor/DVR Cable SMB 0.3M0.3 m (1 ft) analog cable, SMB (female) to BNC (female) to connect camera to coaxial cableOrder number NBN-MCSMB-03MMonitor/DVR Cable SMB 3.0M3 m (9 ft) analog cable, SMB (female) to BNC (male) to connect camera to monitor or DVROrder number NBN-MCSMB-30MVIDEOJET XTC XF Video TranscoderHigh-performance video transcoder. H.264; CF card slot; ROI; max resolution 1080p; 2 channelsOrder number VJT-XTCXFMonitor/DVR Cable SMB 3.0M3 m (9 ft) analog cable, SMB (female) to BNC (male) to connect camera to monitor or DVROrder number NBN-MCSMB-30MNPD-5001-POE Midspan PoE InjectorPower-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4 W, 1-portOrder number NPD-5001-POENPD-5004-POE Midspan PoE InjectorPower-over-Ethernet midspan injectors for use with PoE enabled cameras; 15.4 W, 4-portsOrder number NPD-5004-POERepresented by:North America:Europe, Middle East, Africa:Asia-Pacific:China:Latin America and Caribbean:Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180***********************.com Bosch Security Systems B.V.P.O. Box 800025617 BA Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 330******************************Robert Bosch (SEA) Pte Ltd, SecuritySystems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 2699*****************************Bosch (Shanghai) Security Systems Ltd.203 Building, No. 333 Fuquan RoadNorth IBPChangning District, Shanghai200335 ChinaPhone +86 21 22181111Fax: +86 21 22182398Robert Bosch Ltda Security Systems DivisionVia Anhanguera, Km 98CEP 13065-900Campinas, Sao Paulo, BrazilPhone: +55 19 2103 2860Fax: +55 19 2103 2862*****************************© Bosch Security Systems 2016 | Data subject to change without notice 14148787083 | en, V15, 30. May 2016。
罗克韦尔 ControlLogix 系统 说明书
准备事宜 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 1756-L7x 控制器部件. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
未随 1756-L6x 控制器提供的部件. . . . . . . . . . . . . . . . . . . . . . 33 1756-L6x 控制器安装. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 CF 卡的安装和取出 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 电池的连接与更换 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 将控制器插入机架 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 将控制器从机架拆下 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
安装 1756-L7x 控制器 安装 1756-L6x 控制器
控制器使用入门
访客一体机参数表
1.1、18,可设置VIP人员，输入姓名，编号，如是V1P人员，则提示并打印VIP访客单，不需要选择被访人。
2.19、（可选功能）可直接在系统上进行身份证/IC卡/二维码直接授权门禁过闸机进出，离开刷闸机后系统自动签离、自动记录离开时间。
高端部件：采用比利时进口Me1exis原装红外探测器，精度高、性能稳定、质量可靠，为国内高端
配置。
金属材质：机壳采用金属材质，坚固耐用、不易变形或损坏。
产品特点
快速筛查：主动式采集红外温度数据，不需要人员操作，在小于1秒内快速完成测温。
非接触式测温：固定式红外温度传感器测量人体腕部或额头温度，避免测温人员与被测人员直接接触，引发交叉感染。
*1.6内置条码枪，红外自动连续扫描。
*1.7内置摄像头，CMOS传感器；帧速：120帧/秒；像素：130万。
*1.8内置热敏打印机：打印宽度：80mm,打印长度：26Ommo
1.9接口：USB2.0接口4个；TCP/IP网口1
1套
个；电话线接口2个；电源接口1个；音频输入输出接口各1个。
产品重量：净重10.65kgo
*2.4、拍摄存储功能：可抓拍现场图片并自动保存。（必须提供公安部检验报告或者省部级以上国家权威机构的证明文件）
2.5、登记功能：可采集访客信息，输入被访问人姓名，自动调出人员数据，完善被访人信息。
*2.6、被访人信息登记：（1）被访人姓名模糊查询，输入姓名的第一个字、或首字母、手机号（或房间号、电话号码、分机号）模糊查询，系统自动带出相应的被访人信息；（2）选择被访对象，可根据单位、部门、职工职位、职工姓名、电话等条件进行查询。
2.20、（可选功能）微信预约的访客登记时可扫描二维码通行证，系统自动带出预约信息进行快速登记。（可定制访客机内含二维码扫描器）
烟雾报警
郑州大学西亚斯国际学院本科毕业论文（设计）题目家庭烟雾报警系统的设计指导老师海洁职称讲师家庭烟雾报警系统的设计摘要随着现代家庭用火、用电量的增加，家庭火灾发生的频率越来越高。
烟雾报警器也随之被广泛应用于各种场合。
我国的烟雾自动报警控制系统经历了从无到有、从简单到复杂的发展过程，其智能化程度也越来越高，且烟雾报警器种类比较多，主要是分立器件和单片机控制的烟雾报警。
鉴于目前家庭中的烟雾问题而设计的家庭烟雾智能报警系统设计，本设计是基于AT89S52单片机的烟雾报警器。
它主要是利用单片机的稳定性及设计简单实用，通过每个的独立电路组合起来组成一个以单片机为核心的烟雾报警电路。
其中有单片机的最小系统，MQ2气敏传感器，报警电路,实现对家庭烟雾的监测，及时避免由于烟雾造成的财才和人们的生命安全。
关键词单片机/传感器/报警Home Smoke Alarm SystemABSTRACTWith the modern family the use of fire, electricity consumption increases, households are more frequent fires. Smoke alarm also will be widely used in various occasions. Our smoke alarm control system from scratch, from the simple to the complex process of development, the increasingly high level of intelligence, and more types of smoke alarms, mainly discrete devices and smoke alarms SCM . Given the current smog problem in the family home designed for intelligent smoke alarm system, this design is based on the AT89S52 microcontroller smoke alarm. It takes the single chip design is simple and practical stability and through the combination of each independent circuit to form a single chip as the core of the smoke alarm circuit. Including the smallest single chip system, MQ2 gas sensors, alarm circuit, the monitoring of the family smoke, in time to avoid the smoke was caused by financial and human lives.KEY WORDS MCU ,sensor ,alarm目录中文摘要 (I)英文摘要 (II)1绪论 (1)1.1论文研究来源、目的和意义 (1)1.2设计要求 (1)1.3设计方案 (2)1.3.1气敏传感器驱动555震荡报警 (2)1.3.2单片机检测气敏传感器再驱动蜂鸣器报警 (4)2硬件设计 (6)2.1烟雾传感器 (6)2.1.1光电烟雾报警IC种类 (6)2.1.2BL59A66光电烟雾报警器 (6)2.1.3离子烟雾报警IC (7)2.1.4KT-601型便携式可燃气体检测仪 (8)2.1.5MF8892型烟雾检测仪 (8)2.1.6KING-01型可燃气体检测仪 (8)2.1.7 GS-1型火警报警器 (9)2.1.8MQ2型气敏传感器 (9)2.2主控制器AT89S52 (11)2.3ADC0804 (13)2.4电源电路 (15)2.5报警驱动电路 (16)3系统软件设计 (17)3.1软件流程图 (17)3.2K EIL U V ISION3软件环境简介 (17)总结 (20)致谢 (21)参考文献 (22)附录 (23)1 绪论1.1 论文研究来源、目的和意义随着科技的发展，越来越多的巨大的隐患由于工业生产和人们的日常生活而产生。
基于单片机的烟雾报警器的设计1
目录目录 (1)一方案论证与比较 (2)方案一：气敏传感器驱动555震荡报警 (2)方案二：单片机检测气敏传感器再驱动蜂鸣器报警 (2)二部分器件简介 (3)1. 烟雾传感器 (3)（1）光电烟雾报警IC种类 (4)（2）离子烟雾报警IC (4)(3) KT-601型便携式可燃气体检测仪 (5)2. 主控制器AT89S52 (6)（1）MSC-51芯片资源简介 (6)(2) 单片机的引脚 (7)(3) 89S51单片机的外接晶体引脚 (8)(4) 89S51单片机的控制线 (8)(5) 89S51单片机复位方式 (8)三报警系统设计 (9)1.硬件电路设计 (9)（1）单片机最小系统 (9)（2）气敏检测系统 (10)（3）电源电路 (10)（4）报警驱动电路 (10)四结束语 (11)五参考文献 (12)一方案论证与比较方案一：气敏传感器驱动555震荡报警如图1所示为简易气体烟雾报警电路。
该报警器由降压整流与稳压电路、气敏传感元件和触发、报警音响电路等组成。
降压整流与稳压电路由变压器B、桥氏整流电路、集成稳压电源7805等组成。
触发、报警音响电路由可控多谐振荡器(555、R2、W2、C4)和扬声器Y等组成。
半导体气敏元件采用QM-25型或MQ211型，其适用于煤气、天然气、汽油、醇、醚类及各种烟雾的报警，其要求加热电压稳定，故采用7805对灯丝电压进行稳压，且要求开机预热3分钟。
当气敏元件QM接触到可燃性气体或烟雾时，其A～B极间的电阻降低，从而使该电阻与W1的分压上升，相应555④脚电位上升，当④脚的电位上升到lV以上时，555起振，其振荡频率为f=1.44／(R2+2Rw2)C4。
图中所示参数对应的频率约为0.6～8kHz。
调节电位器W2，使其频率为1.5kHz即可。
相应555的输出端③脚的输出信号推动扬声器Y发出报警声。
正常情况下，气敏元件的A-B极间的阻值较大，该电阻与W1的分压减小，相应使555④脚处于低电平，555停振，扬声器Y不工作。
BL59S12中文资料
本地无烟， Vin=17V
VOH 高电平输出电压 H2 , H1 Iout=-16mA
BL59A12/BL59S12
VDD 最小 - 6.0 － 6.5
最大 12 7.8
单位 V V
12 － 12 -
8 uA 1.9 mA
12 -
2.9
9.0 9.0 9.0 9.0 3. 2 9.0 6．3 9.0 8．5 12 12 12 12 -80 9.0 0．5 9.0 25 12 － 6.5 5.5
（参考管脚描述）
Active,Iout=100uA 9.0 VDD-4.4 VDD-5.6
To 500uA(负载调节)
IRED Inactive,Iout=-1uA -
-
0. 1
Active,Iout=6uA
9.0 2.25 3.75
(负载调节)
IOH 高电平输入电流
I/O 本地有烟,Vout=4.5V 6.5 -4
推挽驱动输出端 通过推挽驱动器输出的信号驱动电路外部蜂鸣
器发出警报，显示电路的各种工作状态。
反馈端
把 H1 , H2 信号反馈到推挽输出电路中。
信号输出端
该端为漏极开路端，输出脉冲信号可直接驱动
外部发光二极管工作。LED 还能反映检测电路 不同的工作状态情况。
振荡器输入端
与外部电阻、电容连接，决定电路内部振荡器 的振荡周期。
外部电容、电阻 与外部电阻、电容连接，决定内部电路 IRED 的
连接端
输出的脉冲周期。
地
低电压检测输入 该端通过外部电阻，从 VDD 和 LED 之间连接点中
端
获得解扣电压，决定低电压报警极限。
电路测试端
该端内部有下拉器件。此端置高电位，电路进 入测试状态，相当于模拟烟雾条件；该端浮置 时，由于下拉器件的作用，回到 Vss（低电位）.
BL59A12(BL59S12)中文技术手册使用说明
BL59A12（BL59S12）光电烟雾探测器集成电路1.产品介绍1.1基本功能：BL59A12（BL59S12）是一种CMOS 大规模集成电路，用来烟雾探测。
里面有非常小功率的模拟和数字电路。
结合一个IR 光电内室，这个集成电路能够用来接收到细小烟雾粒子光散射的信号，来探测烟雾。
然后这个集成电路推拉法输出信号驱动外部压电蜂鸣器，产生突然报警的声音。
1.2应用：烟雾探测系统2.特性：电源电压范围：6V-12V平均电源电流：8μA工作温度范围：-10-60℃可以电池供电3.集成电路框图4.引脚分布5.管脚描述6.集成电路的功能6.1这个可变增益的光电放大器直接点到红外探测器（光电二极管）上。
放大器的值由外部电容C1和C2决定。
在备用的时候，放大器的值是最小值。
在烟雾状态，放大器的值是中等的。
进入测试状态，放大器的值是最大的。
此外，在备用状态，如果特殊的监控电路被激活检测烟雾室内的敏感度，放大器的值也处于最大值。
6.2使用VSS作为参考电压，I/O管脚能够收集最多40个单位。
当I/O管脚用来当成一个输入，它的片上下拉电阻能够阻止噪音进入这个单元。
在烟雾状态，这个单元激活I/O驱动来发送信号给互相连通的单元来激活远程报警。
6.3显示方法：LED（连接到LED管脚）闪光连接到报警声音，暗示了局部的烟雾状态。
只有脉冲报警声音没有LED闪烁，暗示了一个远距离的烟雾状态。
7.技术参数：7.1绝对最大的额定参数（VSS作为参考）省略若干，自认为没用的东西8.应用例子9.校准进入校准模式，16管脚必须低于VSS，从这个管脚引出大于100μA连续的电流超过一个时钟周期。
为了退出这个模式，TEST管脚浮动至少一个振荡器周期。
10.封装图。
DF59-2S-2V(51);DF59-3S-2V(51);DF59-4S-2V(51);DF59-2P-2C;DF59-3P-2C;中文规格书,Datasheet资料
9.Resistance to soldering No solubility of resin which affect the item’s
heat
performance.
Reflow: Depends on recommended temperature profile. Hand soldering: Soldering iron temperature 350 ± 10ç, 3 sec.
nInsulation resistance 1000Mø min.
nContact resistance 50mø max. (DF59-*P-2FC/SP) 30mø max. (DF59-*P-2C)
Temperature 40 ± 2ç, humidity 90-95%, left for 96 hours
No electrical discontinuity over 1μs.
AC650V / minute. Under 6V DC, must be Measured by 100Ma (DC or 1000Hz) Frequency 10-55Hz, single amplitude 0.75mm, 3 directions, 10 cycles each
5.Shock
No electrical discontinuity over 1μs.
Acceleration 490 m/s2, 11ms; duration, sine half-wave 3 cycles in each of the 3 axis.
6.Humidity 7.Temperature cycle 8. Operating Life
■Applications
Bosch Security Systems 软件手册 AM18-Q0635说明书
Bosch Security Systems
软件手册
目录 | zh 5
37 37 37 37 37 37 38 39 39 39 39 39 39 39 39 39 40 40 40 41 41 41
42 42 42 42 42 42 42 42 42 42 43 44 45 45
AM18-Q0635 | v5.6 | 2013.01
摄像机浏览器界面
NIN-832 FW5.7
zh 软件手册
摄像机浏览器界面
目录
1 1.1 1.2 1.2.1 1.3
浏览器连接 系统要求 建立连接 摄像机中的密码保护 受保护的网络
2
系统概述
2.1
实况页面
2.2
录像
2.3
设置
3 3.1 3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 3.1.6 3.1.7 3.1.8 3.1.9 3.1.10 3.1.11 3.2 3.2.1 3.2.2 3.2.3 3.2.4
设置
Bosch Security Systems
软件手册
目录 | zh 3
12 12 13 13 13
14 14 14 14
15 15 15 16 17 18 19 20 20 20 20 20 21 22 22 23 23 24
26 26 27
AM18-Q0635 | v5.6 | 2013.01
网络 网络访问 自动 IP 分配 IP V4 地址 IP V6 地址 DNS 服务器地址 视频传输 TCP 速率控制 HTTP 浏览器端口 HTTPS 浏览器端口 RCP+ 端口 1756 Telnet 支持 接口模式 ETH 网络 MSS [ 字节 ] iSCSI MSS [ 字节 ] 网络 MTU [ 字节 ] 启用 DynDNS 提供商 主机名称 用户名 密码 立即强制注册 通知邮件 状态 高级 SNMP
博斯（Bosch）录像站8.9软件说明书
u Recording and Management Software for IP video u Connect up to 64 video sources per stationu Supports Bosch H.264/MPEG-4, third-party MPEG-4 and JPEG devicesu HD / Megapixel camera supportu Unlimited remote receiver stationsBuilding on DiBos technology the Recording Station uses Bosch’s proven video management, recording and communications technology and takes IP based video surveillance to a new level. It forms an integral part of overall security solutions for many applications –including banks, large retailers, railway stations, city centers, industrial facilities and office buildings.With Recording Station you can retrieve live and recorded video from anywhere in the network. Whether they are on site or at a remote network location, authorized personnel have quick, convenient access to all information making Recording Station the perfect solution for surveillance over distributed networks.Recording Station supports live viewing and recording at any resolution up to 2048 x 1536 pixels (3 Megapixel) including HD widescreen resolutions. It manages up to 64 IP video sources (Bosch and 3rd party) that are compatible to the following video compression standards:•Bosch H.264•Bosch MPEG-4•Axis MPEG-4•MJPEG via HTTP and TFTPThe unique, scalable GUI allows live and recorded images from multiple remote stations to be viewed from a single PC (receiver station). With this powerful function, security managers can monitor and supervise multiple locations simultaneously even if remote stations are connected through a WAN.Each camera offers in-window pan/tilt/zoom functionality from local or remote facilities. Images are displayed with date/time, location, camera name and the status of connected devices such as detectors and sensors.Recording Station can be programmed to respond to specific situations and events automatically. In response to alarms, the system can be programmed to record at a higher quality and to transmit images or messages to security personnel.Playback is easy thanks to familiar search and navigation functions using a graphical timeline control. Users can playback recordings from multiple stations simultaneously and synchronously on one interface. Fast, powerful image search functions like the Smart Motion Search eliminate time consuming manual searches.Export the video to an archive with the push of a single button - all digitally watermarked to ensure the credibility of your recordings. You can even export multiple cameras from different recorders. Use the scheduled export to recurrently backup yourTo ensure the highest security, all system access is controlled by multiple user authorization levels which determine individual permissions for each user to a very high level of detail. These authorization levels determine what a user can do in the system. Elements such as camera viewing and control, playback and export of recordings, as well the types of system configuration settings that are allowed can be individually configured.Events, such as login, log-off, status changes, image transmission, video export, and system shutdown are logged in a database and can be easily imported to spreadsheet programs like MS Excel. Video authentication is built-in to detect any attempt to alter the recorded images.Recording Station provides various interfaces to other systems such as Bosch access solutions and alarm panels, as well as external systems like ATM and POS terminals, fire alarm systems, number plate capture equipment and video content analysis solutions. Integration with other security and building management systems is accomplished using OPC (OLE for Process Control). When even tighter integration is required, our VideoSDK provides you with a complete toolbox of modules for playback, searching, viewing and much, much more.Use Recording Station in a LAN environment with Bosch Video Management System to advance to a true enterprise solution which provides a comprehensive feature set such as centralized user, event and alarm management, multi-monitor workstations with zoom able sitemaps and CCTV keyboard control.For special cases when the customer wants to be hardware independent we offer a USB dongle that provides a unique Computer Signature (Dongle ID). Recording Station still needs to be licensed via a software authorization and SLMS.This USB dongle also can be used in case the Computer Signature changes on every start of Recording Station caused by for example•RAID which covers / alters the HDD IDs or providesan own - mostly cryptically - hardware ID •Windows 7 / Server 2008 which shows only theseMACs which are actually connected•Different Windows users which have differentpermissions to access PC hardwareMinimum requirements for Workstation PCs running Bosch Recording Station (Recorder and Receiver)Graphic adapter recommendationsMinimum Requirements for server platforms running Bosch Recording Station (Recorder only)Device Compatibility / Integration featuresOrdering InformationDVD Box + Manual without licenseRecording Station DVD Box and Manual, without LicenseOrder number BRS-DVD-00A DVD Box + Manual 16 IP camerasRecording Station DVD Box and Manual, Base License for 16 IP Cameras includedOrder number BRS-DVD-16A DVD Box + Manual 32 IP camerasRecording Station DVD Box and Manual, Base License for 32 IP Cameras includedOrder number BRS-DVD-32A Software OptionsBase License 4 IP cameras (e-license)Recording Station Base License for 4 IP CamerasOrder number BRS-BASE-04ABase License 8 IP cameras (e-license)Recording Station Base License for 8 IP CamerasOrder number BRS-BASE-08ABase License 16 IP cameras (e-license)Recording Station Base License for 16 IP CamerasOrder number BRS-BASE-16ABase License 32 IP cameras (e-license)Recording Station Base License for 32 IP CamerasOrder number BRS-BASE-32AExpansion License 4 IP cameras (e-license)Recording Station Expansion License for 4 additionalIP CamerasOrder number BRS-XCAM-04AExpansion license for 32 IP cameras (e-license)Recording Station Expansion License for 32 IPCamerasOrder number BRS-XCAM-32AFeature License ATM POS bridge (e-license)Recording Station Feature License for ATM/POSBridge IntegrationOrder number BRS-FATM-AFeature License IP Server (e-license)Recording Station Feature License for IP ServerSocket ConnectionsOrder number BRS-FIPS-AFeature License Security Panel (e-license)Recording Station Feature License for Security PanelIntegrationOrder number BRS-FPAN-AFeature License CD/DVD writing for Receiver (e-license)Recording Station (Receiver) Feature License CD/DVDWritingOrder number BRS-FWRI-ABRS USB DongleRecording Station USB dongle. Provides a unique ID ifcomputer signature often changes.Order number BRS-DNGL-A30 day Demo License (e-license)Recording Station Demo License for 32 IP Cameras(expires after 30 days)Order number BRS-DEMO-32ARepresented by:Americas:Europe, Middle East, Africa:Asia-Pacific:China:America Latina:Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180***********************.com Bosch Security Systems B.V.P.O. Box 800025617 BA Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 330******************************Robert Bosch (SEA) Pte Ltd, SecuritySystems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 2699*****************************Bosch (Shanghai) Security Systems Ltd.201 Building, No. 333 Fuquan RoadNorth IBPChangning District, Shanghai200335 ChinaPhone +86 21 22181111Fax: +86 21 22182398Robert Bosch Ltda Security Systems DivisionVia Anhanguera, Km 98CEP 13065-900Campinas, Sao Paulo, BrazilPhone: +55 19 2103 2860Fax: +55 19 2103 2862****************************© Bosch Security Systems 2012 | Data subject to change without notice 1462085899 | en, V4, 11. Jun 2012。
BRODIX 高性能汽车工程产品介绍说明书
PROUDLY MADE INBP B R 7 B S 300™BRODIX now offers small block and big block Chevrolet compatible cast iron blocks to enhance your racing programs. These new blocks will offer you another affordable option for your racing needs.N E W !™NE W !N E W !N EW !NE W !•Latest Additions to the Dragon Slayer Series •New and Improved “As Cast” Intake and Exhaust Ports•New 300 cc Intake Port Flows Over 437 cfm •High Flowing Exhaust for Turbo/Blower UseBR 7 B S 300-B ™BB- 3 X TRA 380-B ™•Newly Designed All-Billet Heads•The Ultimate in Performance and Durability for Turbo/Blower ApplicationsCAST IRONSMALL BLOCK AND BIG BLOCK CHEVROLET COMPATIBLE BLOCKS•Newly Designed Intake andExhaust Ports•New Nitrous-Friendly Combustion Chambers •New Ultra Stable Rocker SystemDS 365™DS 320™BIG BLOCK AND™™LS C OMPATIBLELS C OMPATIBLEC o m i n gS o o n C o m i n gS oo nWith an in-house foundry and machine shop, we have total control of the manufacturing process from start to finish which allows us to offer our customers maximum value for their investment.BRODIX products are made in the USA at our foundry where we have had four generations of precision metal casting experience.QUALITY AND CUSTOMER SERVICE HAVE BEEN A WAY OF LIFE AT BRODIX FOR OVER 50 YEARSWe successfully repair 98% of the damaged BRODIX heads that are returned to us. We often repair/refurbish heads that were originally manufactured over 35 years ago.As racers and car enthusiasts ourselves, we know racing parts are a big investment. That is why we work hard every day to ensure that we produce the best of the best!Cylinder Head Parts Kits3D SCANNING & DESIGN SERVICESPricing and delivery time will vary based on design complexity and desired final design stage.METROLOGYNE W™PaCKaGE COMPOnEnTSCylinder Heads Complete Intake Manifold (4150 Series)Valve Cover Studs & NutsHead Gasketst i b l e T o p E n d C o m™™t i b l eT aVaILabLE bIG bLOCK COMbO S• PS CB: VALVE BOWLS BLENDED • PS MI: MATCH INTAKE PORTS• PS Valve Job: COMPETITION VALVE JOB•Intake Valves: 2.204 X 5.200 o.a.l. X 8 mm STEM, BEADLOCK - BR 70204•Exhaust Valves: BR 7 - MACHINED FOR CROWER (TOP VIEW)• • • Valve Angle: 12°• Flat Milling: .0060 in PER cc • Dowel Shift: NOT AVAILABLE• Pushrod Slots: STANDARD (BR 7, STS BR 7, STS BR 7 273)• • • • • • STS BR 7b R 7™ S e r i e sL S C N E WSTS BR 7 BS 273•Accepts up to 1.650 Springs STS BR 7 273Flows Over 415 cfm 2.250 / 1.614 Valve Sizes 50° Valve Job (Intake)45° Valve Job (Exhaust)Uses Standard LS7 Components B IG S P R IN G•High Flowing Exhaust for Turbo/Blower Use• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORTS TO FEL-PRO 1223-3• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.165 X 4.900 o.a.l.X 8 mm STEM, BEADLOCK - MA 11686• Exhaust Valves:• Valve Springs:b R3™S e r i e s• ID Locators:• Retainers:L S CbaSIC EaSY ORdER nUMbERS and MOREDEATH TRAPTHE REAPERJAMES GOADFlat Milling: .0060 in PER ccAngle Machining: NOT AVAILABLEDowel Shift: NOT AVAILABLE Pushrod Slots: STANDARD Valve Centerline: STANDARDIntake Manifold: HP-1 / HV 1016 (IK 180)HV 1014 / HV 1016 (IK 200 , IK 210)• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO FP 1204 (IK 180)MATCH INTAKE PORT TO FP 1206 (IK 200) MATCH INTAKE PORT TO FP 1205 (BP IK 210)• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.020 X 4.920 o.a.l. - BR 6170DI (IK 180, IK 200)• Exhaust Valves: 1.600 X 4.920 o.a.l. - BR 6169DI (IK 180, IK 200)• Valve Springs: 1.250 HYDRAULIC VALVE SPRING - CC 981,POLISHED sIK ® Series23° C y L i n d e r H e a d S74 cc. These are the most affordable high quality aluminum cylinder heads on the market.f Standard Valve Cover Pattern64 cc / 70 cc Combustion Chambers Straight Spark PlugsEnds Milled and Drilled for AccessoriesDuctile Iron Valve Seats for Use With Unleaded FuelCNC Ported Combustion Chambers Available as Large as 75 cc™CYLINDER HEAD PARTS KITSHK 2021230 SHK 2021470 SHK 2081550 STHE IK® 180, IK® 200, ANDBP IK 210 ARE AVAILABLE IN ATOP END COMBO KIT• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO FP 1204 (RR 180)• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.020 X 4.920 o.a.l. - BR 6170DI (RR 180)• Exhaust Valves: 1.600 X 4.940 o.a.l. - BR 6169DICYLINDER HEAD PARTS KITSl b l o c k c h e v y R a c e -R i t e ®S m a l l b l o c k S e r i e sf 67 or 64 cc Combustion Chambers Optional LT1 Modifications Available Ends Milled and Drilled for Accessories Available With Straight or Angled PlugsDuctile Iron Valve Seats for Use With UnleadedR ace-Rite®™THE RR 180™ AND RR 200™ ARE AVAILABLE IN A TOPEND COMBO KIT• • • • • • •™• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO FP 1206• PS Valve Job: COMPETITION VALVE JOB • Intake Valves: 2.080 X 4.965 o.a.l. - BR 81019• Exhaust Valves: 1.600 X 4.965 o.a.l. - BR 81021•Valve Springs: 1.550 FLAT TAPPET VALVE SPRING - BT 120121,150 lb CLOSED, 365 lb OPEN, 1.950INSTALLED HEIGHT , .600 MAXIMUM LIFT 1.550 ROLLER VALVE SPRING - GA 1000, 240 lbdragon Slayer ™Seriess m a l l b l o c k PaCKaGE HEadS™THE DS 225 IS AVAILABLET HE C oRvETTE HAS A 598 ENGINE wITH BRoDIX SR 20 H EADS , BRoDIX ALumINum BLoCK , AND A BRoDIX INTAKE mANIfoLD .T HE D RAGSTER HAS A 632 ENGINE wITH BRoDIX SR 20 HEADS , iStoRy •29 C oNSECuTIvE NHRA S uPER C omP R ouND w INS IN 2015T r a c k1™S e r i e staken to the next level with modernized CNC porting.®•Ductile Iron Valve Seats for Use With Unleaded FuelCYLINDER HEAD PARTS KITSTHE TRACK 1™ AND CNCPORTED T1 ARE AVAILABLE IN ATOP END COMBO KIT• Head Studs: ARP 234-4301(12 pt) (229)• Accessory Bolt Holes Are Drilled• Spark Plug Starting Points: NGK R5671A-9 FOR ALCOHOL• Spring Pockets: MAY NOT BE CUT ANY LARGER OR DEEPER• Valve Angle: 23°• Angle Milling: .0078 in PER cc • Flat Milling: .0060 in PER cc• Angle Machining: NOT AVAILABLE • Dowel Shift: NOT AVAILABLE • Pushrod Slots: STANDARD (229)• Stud Girdle: BR 6440 (229)• Rocker Arms: STANDARD (229)• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO MG 1229 (229)MATCH INTAKE PORT TO MG 1234 (225)MATCH INTAKE PORT TO MG 1234, TRIM TO FIT (234)• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.125 X 5.065 o.a.l. - BR 60025 (229)• Exhaust Valves: 1.600 X 5.065 o.a.l. - BR 60030 (229)• Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb•Ductile Iron Valve Seats for Use With Unleaded Fuel •100% CNC Ported•A-356 Virgin Aluminum; Easily Repaired•Combustion Chambers Available in a Variety of Sizes (Available CNC Ported as Large as 76 cc)•Ends Milled and Drilled for Accessories •Nitrous-Friendly Deck Surface•.400 Raised Oval Intake Ports (225, 234)•Requires Offset Rockers (225, 234)23° C y L i n d e r H e a d SH e a d H u n t e r ™a l lb l oc k c h S e r i e sTHE BP HH SB O 229™ IS AVAILABLE IN ATOP END COMBO KIT™Eddie BarcelloSPECIAL SPREAD PORT EXHAUSTGASKETS ARE AVAILABLE EXCLUSIVELY FROM BRODIX®.• • • •• • • • Unleaded Fuel•67 cc Combustion ChambersTHE BP 11 SP X IS AVAILABLEHK 2101550 TCYLINDER HEAD PARTS KITS ™23° C y L i n d e r H e a d S-11 X ™ S e r i e s•CNC Ported Combustion ChambersAvailable as Large as 76 ccs m aSPECIAL INTAKE GASKETS AND SPREAD PORT EXHAUST GASKETS ARE AVAILABLEEXCLUSIVELY FROM BRODIX®.•PS CB: VALVE BOWLS BLENDED •PS MI: MATCH INTAKE PORT•PS Valve Job: COMPETITION VALVE JOB •Intake Valves: •Exhaust Valves:•Valve Springs: 1.550 ROLLER VALVE SPRING - IS 9985, • Retainers: 1.550 10° TITANIUM - MA 2398BR •+30 hp Over Wedge Heads4.500 Series WP FF 13 STD•13° Wedge Design •Proven Performance•Industry Leading Reliability4.500 b o r e S pa c i n g S e r i e sFF 10 STD CNC BAREWP BD 4510WP FF 13 STDDaddy DaveGoliath 2.0• • • • • • • • • • •• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO BRODIX MG 1800• PS Valve Job: COMPETITION VALVE JOB • Intake Valves: 2.140 X 5.290 o.a.l. - BR 81050• Exhaust Valves: 1.600 X 5.300 o.a.l. - BR 81051•Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000,• Retainers: 1.550 10° TITANIUM - MA 2398BR (STS 18 SP X, STS 18 STD X)racer who wants to go fast.•Spread Port Exhaust•Uses Existing 23° Rocker Arms •10° Intake Face AngleRaised Intake Ports -18 X ™ S e r i e sl b l o c k c h e v y™THE 18 STD X™, 18 SP X™, STS 18 STD X, AND STS 18 SP X ARE AVAILABLE IN A TOP ENDCOMBO KITE NGINE B uILDER : J AY D ICKENS R ACING E NGINESface requiring a special intake manifold and components.• • • • • •• • • • •• • • • • •• • • •5° Intake Flange•18° Standard or Spread Port Exhaust •Flows Over 390 cfm CNC Ported •58/107 Valve Spacing •Available CNC Ported•A-356 Virgin Aluminum; Easily Repaired-18 C ™ S e r i e ss m a l l b l o c k c h e v y cE NGINE B uILDER : w HEELER R ACING E NGINESP RoDuCTS :•BRodiX c•Raised Intake Port•Dual Exhaust Bolt Pattern•Center Cylinder Valve Placement•Available With Copper or Ductile Iron Valve Seats• • • • • • • • • m a l l b l o c k c h e v •Flows 370 cfm CNC Ported •283 cc Intake Ports •New 13° Valve Angle•Exhaust Pattern - Compatible With 18° Standard Chevrolet •100% CNC PortedINTAKE CHAMBER VALVE SIZESPORT VOLUME INTAKE/EXHAUSTV6 -8 194 cc 67 cc 2.080/1.600 V6 -10 210 cc 67 cc 2.080/1.600VALVE SIZE0.200 0.300 0.400 0.500 V6 -8 2.080 INTAKE 134 191 230 240 1.600 EXHAUST 110 139 155 161 V6 -102.080 INTAKE 145 195 240 253 1.600 EXHAUST110139155161have ductile iron seats and solid phosphorous bronze guides. Helicoils are installed in the rocker stud bosses to assure stability.Cylinder Head Specificationsf aCTS and RELaTEd COMPOnEnTSfLOw CHaRT CfM @ 28" H 2O•Spread Port Exhaust •10° Intake Flange•Exclusive Spark Plug Angle •Available CNC Ported•A-356 Virgin Aluminum; Easily Repaired •Excellent Nitrous Head•Best Wet Flowing Combustion Chamber • • • • • • • • • • • • Intake Manifolds: MS 89 (WP 12 SP RI)SPECIAL SPREAD PORT EXHAUSTGASKETS ARE AVAILABLE EXCLUSIVELY FROM BRODIX ®.•Proven Performer•Center Flow Water Circulation •CNC Ported in Several -12™ S e r i e ss m a l l b l o c k c h e v y fulfill our customers’ needs.• • • • • • • • • • • Available in Three Intake Port Volumes, 270, 275 and 285 cc •1.600 Exhaust Valves•80/135 Valve Centerline •Available Lightened•5/16 Valves Available k c h e v y c o m p aA CComPLISHmENTS :•2017, 2016, 2015 and 2010 uSMtS n• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO COMETIC C5421• PS Valve Job: COMPETITION VALVE JOB•Intake Valves: •Exhaust Valves: 1.580 X 6.090 o.a.l. - BR 91580 (BD 2000)• Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb•Symmetrical Intake and Exhaust Port b d ™ S e r i e sb l oc k c h e v y cWP BD 2300•Flows Over 410 cfm•2.230 Intake Valves •1.600 Exhaust Valves•311 cc Intake Ports •May Be Drilled for Down Nozzles"I LovE mY BRoDIX PRoDuCTS ! T HEY 'RE THE BEST PRoDuCTS , BAR NoNE!"• • • • • •100% CNC Ported •Ductile Iron Intake SeatsBRODIX has to offer.S R 20 S e r i e sb I G b ™THE BP SR 20 IS AVAILABLE IN AEdmond Richardson Honored as One of the Top 50 Drivers in NHRA HistoryiviSion 2 h igh S chool c haMPion CYLINDER HEAD PARTS KITSthe answer for more horsepower, a hassle-free installation, and a great-looking engine • PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO FP 1211 (RR BB-R)M M BP RR BB-2 PLUS, RR BB-2 X, RR BB-2 XTRA, BP RR BB-2 XTRA)• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.250 X 5.218 o.a.l - BR 81040 (RR BB-R, RR BB-O• Exhaust Valves: 1.880 X 5.394 o.a.l. - BR 81038•Angle Machining: AVAILABLE UPON REQUEST •Dowel Shift: NOT AVAILABLE •Pushrod Slots: STANDARD•Stud Girdle: STANDARD, BRODIX 1230•Rocker Arms: STANDARD •Lifters: STANDARD •Pistons: STANDARD•Pushrods: CHECK PUSHROD CLEARANCE WITH HEAD INSTALLED ON• Intake Manifold: HV 2000 / HV 2001 / HV 2016 (RR BB-R, RR BB-2 PLUS,EDELBROCK #7561 / HV 2007 / HV 2008 / HV 2017 (RR BB-O)THE RR BB-O™, RR BB-R™, RR BB-2 PLUS™, AND BP RR BB-2 PLUS ARE AVAILABLE IN A TOP END COMBO KIT+90 hp!R a c e -R i t e ® b i g b l o c k S e r i e s26° C y L i n d e r H e a d Ss•Ductile Iron Valve Seats for Use With •Ends Milled and Drilled for Accessories •High Torque Intake PortsR ace-iteR®CYLINDER HEAD PARTS KITS• • • • • • installation.RR BB-3 X TRA 345™R a c e -R i t e ® b i g b l o c k S e r i e s24° C y L i n d e r H e a d SGREG VENTURAThe BB-1 rectangular port head has a 280 cc intake port and a 119 cc combustion chamber, but may be angle milled to 108 cc or angle machined to 98 cc. The BB-1 is designed for a 396 to 502 engine with a flat tappet or hydraulic cam. Most • PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO BRODIX MG 2001• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: • Exhaust Valves: 1.880 X 5.394 o.a.l. - BR 81038 (STANDARD PACKAGE)•Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lbCYLINDER HEAD PARTS KITS26° C y L i n d e r H e a d Se a d s•Ductile Iron Valve Seats for Use With b b -1™,b b -2™ a n d b b -2 P L U S ™ S e r i e s• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO BRODIX MG 2001 (BB-2 X,• PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.300 X 5.468 o.a.l. - BR 81241 (STANDARD PACKAGE)• Exhaust Valves: 1.880 X 5.394 o.a.l. - BR 81038 (STANDARD PACKAGE)• Valve Springs: 1.550 ROLLER VALVE SPRING - GA 1000, 240 lb• Flat Milling: .0050 in PER cc• Angle Machining: NOT AVAILABLE ON CNC PORTED HEADS • Dowel Shift: NOT AVAILABLE • Pushrod Slots: STANDARD• Stud Girdle: STANDARD, BRODIX 1230• Rocker Arms: STANDARD • Lifters: STANDARD• Pistons: STANDARD (BB-2 X, BB-2 X • Pushrods: CHECK PUSHROD CLEARANCE WITH HEAD INSTALLED • Valve Centerline: • Intake Manifold: HV 2000 / HV 2001CYLINDER HEAD PARTS KITS than stock. Valve cover rails are now raised to assure no oil leakage.•Raised Valve Cover Rail•A-356 Virgin Aluminum; Easily Repaired•119 cc Combustion Chambers •Raised Exhaust•Available CNC Ported•Great Out-of-the-Box Horsepower26° Cy L i n d e r H e a d Sb b -2X ™ a n d b b -2 X T R a ™ S e r i e ssTHE BB-2 X™, BB-2 XTRA™, AND BP BB-2 XTRA™ ARE AVAILABLE IN A TOP END COMBO KIT Array™• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO BRODIX MG 2001 (BB-3 X MATCH INTAKE PORT TO MG 2001 (BP BB-3 X MATCH INTAKE PORT TO BRODIX MG 2104 (BB-3 X MATCH INTAKE PORT TO BRODIX MG 2050 (BP BB-3 X MATCH INTAKE PORT TO BRODIX MG 2150 (BP BB-3 X • PS Valve Job: COMPETITION VALVE JOB• Intake Valves: 2.300 X 5.568 o.a.l. - BR 81341 (BB-3 X 2.350 X 5.568 o.a.l. - BR 81351 (BB-3 X • • • • • • • •Raised Valve Cover Rail b b -3 X T R a ™ S e r i e s24° C y L i n d e r H e a d Sb I G b sPaCKaGE HEadSCYLINDER HEAD PARTS KITS• PS CB: VALVE BOWLS BLENDED• PS MI: MATCH INTAKE PORT TO BRODIX MG 2177• PS Valve Job: COMPETITION VALVE JOB•Intake Valves: 2.375 X 5.610 o.a.l. - BR 81375 (BP HH BB 383)• Exhaust Valves: 1.850 X 5.494 o.a.l. - BR 81185•Valve Springs: 1.640 ROLLER VALVE SPRING - MA 221424, 250 lbThe BRODIX Head Hunter series represents™24° C y L i n d e r H e a d SH e a d H u n t e r ™S e r i e sb I G b l o d s。
K-59产品说明书
U Programación sencilla con un solo botón
U Función DT, rampa, entrada %, EZ-Step
Para hacer su pedido,visite /cl123_125_100ma para
consultar precios y detalles
N.º de modelo
Descripción
CL123 CL125 CL100MA CL123-ADAPTOR-115V CL123-ADAPTOR-230V
0,4
0,8
0,4
0,7
0,4
0,7
0,5 ˚C / 0,2 0,2 0,2
0,9 ˚F 0,4 0,3 0,3
0~ 250 32~ 482 250 400 482 752 400 1000 752 1832 1000 1760 1832 3200
0,7 ˚C / 0,5 0,5 0,5
1,3 ˚F 1,0 0,9 1,0
0,6 ˚F 0,4 0,3 0,3 0,4
-200 ~ -100 -328 ~ -148 0,5 ˚C / 0,9 ˚F 0,3 ˚C / 0,5 ˚F
-100 900 -148 1652 0,4
0,7
0,2
0,3
U -200 ~ 0 -328~ 32 0,4 ˚C / 0,7 ˚F 0,2 ˚C / 0,3 ˚F
0,2
0,4
0,3
0,5
0,4
0,7
0,7
Verathon BladderScan i10 产品保修说明书
LIMITED WARRANTYBLADDERSCAN i10™HQ-LD-0029/ Rev-00 Page 1 of 1THIS LIMITED WARRANTY (“Warranty ”) is provided by V erathon Inc. (“Verathon”) to the subscribing Customer for BladderScan i10™ products and accompanying accessories; namely, the console, probe, and workstation (“Products”) manufactured by Verathon. Unless modified by separate negotiated agreement, this Warranty, together with the terms as set out in the written quotation, order acknowled gment, and invoice, in addition to Verathon’s standard Terms and Conditions of Sale, creates the entire agreement between Verathon and Customer (“Agreement”), superseding all other communications and documentation. Verathon expressly rejects any different, additional, or preprinted terms contained or referenced in any purchase order or other documentation supplied by Customer.SCOPE OF COVERAGE: This Warranty covers service and repair of all malfunctions (mechanical, electrical, and other defects) associated with the Products purchased by Customer from Verathon, including coverage for accidental probe drops, for a period of five (5) years from Product shipment date (“Term”). Replacement parts will be new, rebuilt or non-original manufacturer's parts that perform to the factory specifications of the P roduct at Verathon’s sole option.Verathon will perform repair and replacement services (“Service”) only on Products purchased from an authorized dealer. If Products or components are purchased from an unauthorized dealer, or if the original factory serial number is removed, defaced, or altered, this Warranty is void. If Product purchased by Customer requires Service, Verathon will, at its discretion, either repair or replace the Product. Customer agrees to send the defective Product to Verathon (cleaned and disinfected as appropriate). All exchanged parts become property of Verathon. EXCLUSIONS: This Warranty excludes problems caused by Customer’s acts (or failure to act), the acts of others, or events beyond Verathon’s reasonable control including: ▪ Theft, misuse, mishandling, abuse, extraordinary wear, orneglect. ▪ Misapplication, improper use of chemical cleaning ordisinfecting agents, or other failure to follow Product instructions and safety precautions contained in the Operations and Maintenance Manual. ▪ Use of Products in conjunction with hardware, software,components, services, accessories, attachments, interfaces, or consumables, other than those supplied or specified by Verathon. ▪ Products repaired or maintained by anyone other than aVerathon authorized service provider. ▪ Modification, disassembly, rewiring, re-engineering,recalibration, or reprogramming of Products other than as specifically authorized by Verathon in writing. COVERED COMPONENTS: Warranty coverage applies to the following system components: ▪ Console ▪ Probe▪ WorkstationConsumable items (i.e. batteries, paper, gel) are not covered under this Warranty. All other Product accessories (e.g., battery charger, printers, calibration phantoms/tanks) are limited to a one (1) year factory warranty.OBTAINING SERVICE: To request service, Customer must first obtain a return authorization number from Verathon’s Customer Care Department, pursuant to the guidelines provided. Customer shall return the Product to the following address: Verathon Inc., 20001 North Creek Parkway, Bothell, WA 98011 USA . Verathon ’s Customer Care Department may be contacted by email at ********************, or by phone at 1.800.331.2313. VERATHON SERVICE: Verathon shall provide Services in a timelyand competent manner by professionals qualified to render such services. Verathon agrees that all Services performed, or parts provided by Verathon shall be free from defect in materials and workmanship for the Term. Customer shall notify Verathon if and to what respect any of said guarantees have not been met andVerathon shall promptly, at its own expense and sole discretion, re-perform such services and make such alteration, repair, or replacement as may be necessary to meet the guarantees hereunder so long as the non-performance is due to a manufacturer defect and not physical or Customer induced issues after the service is completed. LIMITED REMEDY: This Warranty gives Customer specific legal rights which may vary based on local law. When, under applicable law, implied warranties are not allowed to be excluded in their entirety, such warranties will be limited to the duration of the applicable written warranty.TO THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING LIMITED WARRANTIES AND REMEDIES ARE EXCLUSIVE AND EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, REPRESENTATIONS, TERMS, OR CONDITIONS, WRITTEN OR ORAL, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE HEREBY EXPRESSLY DISCLAIMED.TRANSFER OF SERVICE: This Warranty extends only to Customer, and may not be transferred to third parties by operation of law or otherwise.。
洛雷科技（Lorex）Edge+系列数字视频监控录像机说明书
Internet & MobIle ConneCtIvIty, H.2644/8/16 CHAnnel eDGe +DIGItAl vIDeo SUrveIllAnCe reCorDerHoMe & bUSIneSS SeCUrItyH.264InstantMobile viewin gGUIPCblackberry™& compatible 3G Smartphones†MacConneCt. ProteCt.the leading edge in video security. Ideal for business or home.Monitor not included. Pictures simulated.ConneCt SeereCorD ProteCt•EDGE design for stand alone or VESA mount (Wall & LCD) •3D graphics, crisp, color rich, high contrast video•DVI/VGA output for display on LCD PC or TV monitor with DVI/VGA input. HDMI compatible• •H.264 video compression¹•Pentaplex operation - View, Record, Playback, Back Up & Remotely Control the system simultaneously •Record at VGA resolution (640 x 480) per channel. •Video output (up to) 1280 x 1024 @ 60 Hz •Small form factor (7.0x11.5x1.5”) •Expandable up to 2TB SATA HDD•“Flex” IR controller (line-of-sight not required)•USB: backup, image transfer, firmware upgrade, mouse •Alarm Input/Output (4/1 ), 2 Audio Inputs/output •PTZ cameras supported (RS485)•Record on motion detection, schedule or continuous •Navigation: Front controls, Mouse, Remote ControlveSA MoUntEasily mounts to the back of an LCD monitor (notincluded) †† (Requires clear access to the VESA mountingholes. Monitor not included).1. Recording time may vary based on recording resolution & quality, lighting conditions and movement in the scene.2. Requires a high speed internet connection and a router (not included).• DVI to HDMI converter cable required. (not included).† Instant Mobile Viewing on iPad™, iPhone™ and other compatible Smart phones: BlackBerry (9000 & above), Andriod (version 1.5 & above) and Window Moblie (6.0 & above). Selectable one channel live viewing. Mobile phone data plan is required (not included). Router port forwarding required. For the latest smart phone compatibility list check †† Easily mounts to the back of an LCD monitor with VESA standard mounting holes and an independent stand (monitor not included). Requires clear access to the 100 x100 mm VESA mounting holes.Always use discretion when installing video and/or audio surveillance equipment especially when there is perceived privacy. Inquire regarding federal, state and/or local regulations applicable to the lawful installation of video and or audio recording or surveillance. Party consent may be required.Microsoft Windows™ 7, XP™, Vista™ are trademarks of Microsoft Corporation. iPhone is a trademark of Apple Inc. Blackberry is a trade mark of Research In Motion Ltd. Android is a trademark ofGoogle Inc. Other trademarks are the property of Lorex Technology Inc. We reserve the right to change models, configurations or specifications without notice or liability. Product may not be exactly as shown. Images are simulated.Internet & MobIle ConneCtIvIty, H.2644/8/16 CHAnnel DIGItAl vIDeo SUrveIllAnCe reCorDerDIGItAl vIDeo reCorDer:•LOREX Instant Mobile Viewing on iPad™, iPhone™ and other compatible Smart phones† : BlackBerry (9000 & above), Android (version 1.5 & above) and Window Moblie (6.0 & above). •Exclusive LOREX Easy Connect Internet Set-up Wizard ²•PC (Microsoft Windows™ 7/Vista/XP compatible) using Internet Explorer® browser •Apple Mac™ compatible using Safari browser for multi channel live viewing•Free LOREX DDNS (Dynamic Domain Name Service) for advanced remote connectivity at all times •Instant email alertsConneCtIvIty:bACk PAnel:Specifications:©2011 Lorex Technology Inc.lorex technology Inc.Dvr:Product Information:Model#:lH324501 - 4 Channel edge + with 500Gb HDD in a Giftbox. UPC Code: 7-78597-32403-7lH328501 - 8 Channel edge + with 500Gb HDD in a Giftbox. UPC Code: 7-78597-32801-1lH326501 - 16 Channel edge + with 500Gb HDD in a Giftbox. UPC Code: 7-78597-32601-7lH3281001 - 8 Channel edge + with 1 tb HDD in a Giftbox. UPC Code 7-78597-32812-7lH3261001 - 16 Channel edge + with 1 tb HDD in a Giftbox. UPC Code 7-78597-32608-6Package Weight:DVR with 500GB HDD - 3.1 kg / 6.85 lb DVR with 1TB HDD - 3.3 kg / 7.4 lb Package Cube:0.02174m / 0.77648ftPackage Dimensions: 320mm x 55mm x 245mm 12.5” x 2.15” x 9.6” (W x H x D)Includes:DVR with Pre-Installed HDD, Remote Control & “Flex-IR”, Power adapter, DVI to VGA Converter, Mouse, Ethernet Cable, 2 screws (for key-hole style VESA mounting), DVR Documentation CD, QSG, Instruction Manual.Dimensions:SySteMOperating System Linux (embedded)PentaplexSimultaneous View, Record, Playback, Backup & Remote Monitoring Number of Channels 4/8/16 ChannelInputs/outputs Video IN 4/8/16 x 1Vp-p, 75ohms, BNCDVI Out DVI compatible. DVI to VGA Converter included Audio IN 2 Line in(RCA)Audio Out 2 line out(RCA)USB Port 2 front & backAlarm IN 4 x TTL, programmable as NC/NO Alarm Out 1 x Relay with NO/NC contact PTZ control By T erminal connector (RS485)Display Live Display 1 or 4 (4ch) 1 or 4 or 9 (8ch)1 or 4 or 9 or 16 (16ch)Live Display Speed 120 (4ch)/ 240 (8ch)/ 240 (16ch) NTSC, 100 (4ch)/ 200 (8ch)/ 200 (16ch) PALOSD ON/OFFOSD Navigation USB Mouse, IR Remote Controller, Front Panel ControlsActivity Detection 6 x 8 grid Sensitivity levels 100System Control USB Mouse, Front Panel Controls, Handheld Remote Control Firmware Upgrade Via USB deviceUser Authority ADMIN/USER/GUESTreCorDInGVideo Compression H.264 Audio Compression ADPCMRecording Speed & Resolution – 4 Channel: 120 fps (NTSC), 100 fps (PAL) @ 640 x 240 NTSC / 640 x 256 PAL60 fps (NTSC), 50 fps (PAL) @ 640 x 480 NTSC / 640 x 512 PAL Recording Speed & Resolution – 8/16 Channel: 240 fps (NTSC), 200 fps (PAL) @ 320 x 240 NTSC / 320 x 256 PAL 120 fps (NTSC), 200 fps (PAL) @ 640 x 240 NTSC / 640 x 256 PAL60 fps (NTSC), 100 fps (PAL) @ 640 x 480 NTSC / 640 x 512 PAL Recording Resolution Setting Programmable per camera Recording Quality Control 5 levelsImage Size8.51 Kbyte (640x480,640x512), 11.2 Kbyte (640x240, 640x256) 14.13 Kbyte(320x240, 320x256)Recording modes Continuous, motion, alarm Pre Recording Max. 10 seconds Post Recording Max. 255 seconds Alarm Recording Programmable per cameraReliabilityWatch-Dog, Auto-recovery after power failurePlAybACkPlayback Display 1,4 (4ch), 1,4,9 (8ch), 1,4,9,16 (16ch)Playback Speed Variable up to 60x Playback Players Apple QuickTime Player SearchBy time & eventStorAGe & ArCHIve StorageUp to 1 HDD’s (SATA)Maximum Capacity Up to 2TBBackup Media USB Flash Drive (max 4GB)Backup File Format MOV file (Codec included)Bookmark Archiving SupportedConneCtIvIty Easy Connect 1. Y oics Enabled (registration required)2. Lorex Auto Port Forward Wizard Software Web browserSupported Operating Systems Windows™ XP, Vista, 7 and Apple Mac (via Safaribrowser)BrowsersInternet Explorer, SafariEmail notificationT ext (4ch), Snap Shot attachment (8/16ch)Mobile connectivityiPad™ , iPhone™ - 3.1.2 and above, Blackberry™ -9000 Series and above, Android (version 1.5 & above),Windows Mobile™ smart phones – 6.0 and above touch screen smart phones DDNS Free Lorex DDNS Web Server Port Programmable by User Network Protocol LAN, DHCP, Dynamic IP, DDNS Network Interface 10/100-Base-TX, RJ-45 Network Speed Control 10 levels (28.8Kb ~ 1.5MB)/sec.GenerAlPower ConsumptionApprox. 30 watts Supply Voltage 120VAC-240VAC, 12VDC, 2.5A(4ch) 3A(8/16ch), 50/60Hz Unit Dimensions (W x D x H) 11.4” / 290mm X 7.0”/178mm X 2.0”/51mm(W X D X H)Unit Weight (KGs) 3.25 lbs Operating temperature 41° ~ 104° F / 5° ~ 40° C Humidity10 ~ 75% NCDvr290mm/11.4”178mm/7.0”。
Ikan Blitz 400 HD 无线视频系统用户手册说明书
Thank you for purchasing the Ikan Blitz 400 HD Wireless Video System. This system features uncompressed high definition video with zero delay. Before using the product, please read this user’s manual. If you have any further questions or comments please visit or email ********************.3■Cautions1. Do not expose this product to extreme hot, cold, dusty or humidconditions.2. Avoid dropping the product or it may damage the hardware.3. Do not spill or get any liquid on the unit since it is not waterproof.4. Do not dismantle, assemble or alter the product.4■Product model and standardThe Long Range Wireless HDMI/SDI Transmission Blitz 400 utilizes today's most advanced wireless video transmission technology, which supports broadcast quality and uncompressed 3G SDI/HDMI HD video signal transmitted with zero delay. The Blitz 400 includes one transmitter and one receiver, where the transmitter provides a 3G/HD SDI input and an HDMI input, and the receiver also provide a 3G/HD SDI output andan HDMI output. The Blitz 400 has 2 external antennas on the transmitter and 5 internal antennas on the receiver’s side. Both the receiver and transmitter feature a frequency select knob, which provides a maximum of 10 workable frequency channels, and supports a maximum of 4 sets working simultaneously. The Blitz 400 can accept a wide range of DC power inputs and includes a Sony L series battery plate.5■Main features:Supports HDMI 1.3HDMI and SD/HD/3G SDI input and outputUp to 1080p 60 Hz uncompressed with zero delayAES-128 encryption with air interface HD video data stream Supports point-to-point, and point-to-multipoint network topology5GHz ISM frequency band, maximum of 10 frequency channels selected by user knob, coexist with WIFI.RX built-in antenna, more compactMaximum transmission distance 400ftSignal indicators for wireless power status, Video status and receiver RSSIIncludes Sony L Series battery plateMachined aluminum case for durability6■Specifications:Transmitter ReceiverSDI Input（ BNC Female） HDMI ;SDI Output（BNC Female）HDMI ;Interface Input (Type A female) ; 2 Antenna port(RP- Output (Type A female); DC input SMA male） ; DC inputSupply voltage range Power consumption SizeMass WeightInput Video Format Output Video FormatInput Audio Format Output AudioSignal Indicator Frequency Band Modulation Mode Transmission Power Receiver Sensitivity Occupied Bandwidth Temperature Range Compliance 7-36V DC< 6.5 W(L x W x H): 115x 67 x 23mmdoesn't include antennas270gHDMI:525i, 625i, 720p 50/59.94/60,1080i 50/59.94/60, 1080p23.98/24/25/29.9/30/50/59.94/60;HDMI Type ASDI:3G, HD, and SD-SDI (auto-selected),SMPTE-259/274/292/296/372/424/425;1x BNC/SDI embedded 2 channel 24 bit/48KHz/POWER-Green; VIDEO-Yellow5.1-5.9GHz,configurable with China,North American, Europe,etcOFDM 16QAMMaximum 18dBm/40MHz0~40°C(operating condition);-20~60°C(Storage)FCC; CE.7-36V DC< 7.5 W(L x W x H): 152x 95 x 23mm355g/HDMI:525i, 625i, 720p 50/59.94/60,1080i 50/59.94/60,1080p23.98/24/25/29.9/30/50/59.94/60;HDMI Type ASDI:3G, HD, and SD-SDI (auto-selected),SMPTE-259/274/292/296/372/424/425;1x BNC/SDI embedded 2 channel 24 bit/48KHzPOWER-Green; Wireless RSSI-Blue (4LEDs); POWER/VIDEO-Yellow5.1-5.9GHz,configurable with China,North American, Europe,etcOFDM 16QAM/-75dBm40MHz0 ~ 40°C (operating condition);-20~60°C(Storage)FCC; CE.7■Specification:Transmitter1) ¼”-20 Screw Hole2) RP-SMA male antenna connector3) Video input indicator, 1 yellow LED4) Power on Indicator, 1 green LED5) Frequency selection knob6) SD/HD/3G SDI input7) HDMI Input8) DC power switch9) DC input, LEMO 4-pin B series connector 8■Parameters:Receiver1) ¼”-20 Screw Adapter2) LED status indicator (4 blue LED for RSSI &1 LED yellowfor POWER/VIDEO)3) Frequency selection knob4) SD/HD/3G SDI output5) HDMI output6) DC power switch7) DC input, LEMO 4-pin B series connector9■Packing list:1 x Transmitter1 x Receiver2 x Sony L Series Battery Plates (Installed)2 x 5 GHz omni-directional antennas (SMA female) 2 x P-Tap to Lemo Cables1 x 6 in. Articulating Arm1 x Clamp1 x Shoemount adapter for transmitter10■Installation details and cautionsTransmitter sidea)Install 2 Omni-directional antennas to the transmitter's RP-SMA female antenna connectors.b)There is one ¼”-20 threaded receiver on the bottom of thetransmitter so the user can utilize the included shoemount adapterto attach the transmitter onto a camera.c)Install battery into battery plate. Unit comes installed with a Sony L Series type battery plate.d)The user can also use the included LEMO 4 pin-male to P-Tap power cable to get power input from an outside power source.12 311Receiver sidea) There is one ¼”-20 mount on the bottom side of the receiver. The usercan utilize the included 6' in. articulating arm and clamp to install the receiver on a tripod.b) Install battery on to the battery plate. Unit comes installed with a Sony L Series type battery plate.c) The user can also use the included LEMO 4 pin-male to P-Tappower cable to get power input from a pro battery.1 2 312Typical connection instructionsConnect the camera’s SDI or HDMI output to the corresponding input port and affix the transmitter to the hot shoe port of the camera. Connect the HDMI or SDI output port of the receiver to the SDI or HDMI input port of the HD monitor. Make sure all antennas and batteries are attached securely. See diagram below.TransmitterReceiverCameraMonitor13Getting startedAfter finishing all the steps above, the system is ready to use. See belowfor the following steps.a) Ensure the source output of the camera is OK and the monitoris powered on. Then switch to the connected video input.b) Ensure input and output SDI or HDMI cables are connected.c) Ensure 2 TX antennas are installed perpendicular to each other for best RF performance. See below.Transmitterd) Ensure that the batteries are installed on both the transmitter and receiver or connected via the DC input port to an outside power source. Then turn power switch of transmitter and receiver to 'ON', then the 'Power' indicator will turn on.14e) Ensure the frequency knobs of transmitter and receiver are set to thesame number. This will ensure that the transmitter and receiver will beset to the same RF frequency.f ) If the camera is on and outputting video the TX side 'video' light will turn on.g) Before the RX has finished its wireless link with the TX, the 4 'RSSI' indicators and 'Video' indicators will be off. When the connection is established, the 'RSSI' indicators will light first, and the 'RSSI' will indicate the received RF signal strength. If the receiver detects wireless video the 'Video' indicator will light up. Before that, if SDI or HDMI video output of the receiver has an HD monitor connected, the OSD will show: 'Link Connecting ' like the picture below.h) The system will spend 20-30 seconds on establishing the link, actual link period will depend on the current wireless channel condition. When the wireless link is set up the "RSSI" light will light up and indicate current wireless signal strength. The "Video" indicators will also illuminate and then the connected HD monitor will display the video and audio accordingly.15■Input video port selection of transmitterThe transmitter has both 3G SDI and HDMI video input ports. The systemwill detect the chosen video source automatically and then set this to the default video input channel. If both SDI and HDMI have valid video input, the system will prioritize the SDI input.■RSSI indicatorsThe receiver will calculate received RF signal strength internally and 5 "RSSI" LEDs will be used to indicate wireless signal power and quality. The user can observe the RSSI LED status to know if the current wireless link is reliable. From 1 to 5, the lit LEDs will show RSSI from Min to Max.Lit RSSI LEDs volume Wireless Link quality Video Quality4Strong Best2-3 Middle Good1 or no lit LED Weak Visible Video Noise■Frequency selection and configurationThe Blitz 400 can work in the 5.1-5.9GHz frequency band. The side panelsof both the transmitter and receiver have a frequency selection knob, which provides a maximum of 10 workable frequency channels. The system supports a maximum of 4 sets working simultaneously. See below for the frequency knob figure.16■Storage conditionsProduct storage temperature should be between -20°C~60°C. For long term storage requirement, please use original hard case, and avoid storing in high humidity, acidic or dusty conditions.■MaintenanceWarningTo ensure your safety and the reliable performance of this system provide stable power within 7 – 35V17Trouble shooting■Frequently AskedQuestionsa) No output on display- Check that the TX and RX have stable power.- Double check that the batteries are charged.- Check that the TX and RX antennas are installed correctly.- Check the 'Video' indicator, if TX 'Video' indicator is not lit, then check if the SDI or HDMI cable is plugged in and a video source is present.- Check that the input video format is compatible with this product’s specifications.b) Poor output video quality- Check if the SDI or HDMI input or output cable is plugged in correctly.- Check how many receiver side 'RSSI' LEDs are lit. There should be 2-3 RSSI LEDs lit for better video quality; if there is only 1 RSSI LED or no LEDs lit, that means the received wireless signal is weak. Decrease the distance between the TX and the RX or try a different frequency channel in case of interference.18Conditions of Warranty Service∙Free service for one year from the day of purchase if the problem is caused by manufacturing errors.∙The components and maintenance service fee will be charged if the warranty period is expired.Free Service will not be provided in the Following Situations: (*Even if the product is still within the warranty period).∙Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.∙Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
A strobe voltage output, referenced to
O
Strobe
VDD. When output = VDD -5V, it enables
other internal circuits.
Power supply
To supply the power
To output pulse drive signal for external
1.2. Applications: Smoke detection system.
2. Features:
Power supply range:
6V ～ 12V
Average supply current: 12uA
Operating temperature range: -10 ～ 60℃
Ideal for battery powered applications.
External capacitor voltage feedback amplifier is formed.
connection
The gain of it is determined by
capacitor’s value.
I
Detecting input
Connect a photodiode to supply a signal to the internal comparator.
元器件交易网
BL59A10/BL59S10
PHOTOELECTRIC SMOKE DETECTOR IC
1. Product description 1.1. Basic function:
BL59A10/BL59S10 is a CMOS LSI used for smoke detection. Ultra-low power analog and digital circuits are contained in it. Combined with an IR photoelectric chamber, this IC is used to detect smoke through receiving light scattered by tiny smoke particles going into the chamber. When smoke is detected, A burst of alarm sounds are generated by an external piezoelectric buzzer driven by the push-pull output of this IC.
6.2. Using VSS as its reference, the I/O pin can be used to connect up to 40 units together. When I/O pin is used as an input, its on-chip pull-down resistor can prevent noise from entering
7. Specifications:
7.1. Absolute maximum ratings(VSS as reference)
Symbol
Parameter
Limits
VDD
Supply voltage
-0.5 ～ +12
VIN DC input voltage
C1, C2, Detect OSC, low-supply trip I/O
I
Oscillator’s input determine the internal oscillator’s
frequency.
External R and C Connected to external R and C, which
connecting
determine the output pulse period of
9 Silver
-1-
Total 8 Pages
8/28/2006
Wrote by 2006
元器件交易网
BL59A10/BL59S10
5.Pin description
Pin No.
Symbol
1,2 C1, C2
3
DETECT
Symbol Parameters
Test condition
VDD Min.
Max.
Unit
VDD VTH IDD iDD VIL VIH
IIN
Power supply voltage range
-- 6.0
Supply threshold voltage, Low supply alarm voltage
4
STROBE
5,14 VDD, GND
6
IRED
7
I/O
8,9
BRASS, SILVER
10 FEEDBACK
11 LED
12 OSC
13 R1
15 LOW-SUPPLY
16 TEST
Input/output Functions
By connecting external capacitor, a
It is an open drain output, can drive
O
Output signal
LED directly. The LED can tell the
detector’s various operation states.
Connected to external R and C, which
O
Push-pull output
driver’s
Push-pull driver outputs signal to drive external buzzer to alarm, and to show various operation states.
I
Feedback terminal
To feed ‘silver’ signal back to the push-pull output driver circuit’s input
Low supply trip voltage VIN = VDD/3
6.5
Standby,
Average supply current (See sample 12 --
figure)
Strobe on,
Supply peak current
IRED off (See sample
12
--
figure)
pull-down device. When it is set high,
I
Test terminal
the IC enters into a simulated-smoke condition. When floating, this pin
comes back to VSS (low) by pull-down
Low level input voltage, I/O Feedback Test
9.0 9.0 9.0
High level input voltage I/O Feedback Test
9.0 3.2 9.0 6.3 9.0 8.5
VIN = VSS or
Input current Detect Low supply trip Feedback
terminal
IRED.
I
Low
voltage
detecting input
It connected to external resistor divider between VDD and LED to get a low supply alarm threshold voltage
This pin is normally low by an internal
OSC,Biblioteka VDD VIN = VSS or VDD VIN = VSS or
12 12 12
VDD
12
V
7.8
V
12
uA
2.0
mA
1.5
2.7
6.3. Display method: LED (connected to LED pin) flashing combined with alarm sound, indicates a LOCAL SMOKE condition. Only pulsating alarm sound without LED flashing indicates a REMOTE SMOKE condition.
O
Output signal
NPN transistor which drives a IR
photodiode.
It can be used to connect up to 40
Input/output
detectors to make auxiliary alarm,
remote alarm, auto-dialer…
6
IRED
11 LED
PIN5=Vdd PIN14=Vss
4. Pin assignment
C1 1 C2 2 Detect 3 Strobe 4 Vdd 5 IRED 6 I/O 7 Brass 8
16 Test 15 Low-Supply 14 Vss 13 R1 12 Osc 11 LED 10 Feedback
device.
6. Function of this IC: 6.1. The variable gain photoelectric amplifier is directly connected to IR detector (photodiode). The amplifier’s gain is determined by external capacitors C1 and C2. During standby, the amplifier’s gain is at minimum. Under smoke condition, the amplifier’s gain is at medium. Entering into test condition, the amplifier’s gain is at maximum. Additionally, under standby state, if the special supervisory circuit is activated to check the chamber’s sensitivity, the amplifier’s gain is also at its maximum.