09150;09151;中文规格书,Datasheet资料
28015;中文规格书,Datasheet资料
The percent error over the sensor’s operating range of 0 to 70 ° C is significant, in the magnitude of 11 to 12 percent. The use of conversion constants to account for air temperature may be incorporated into your program (as is the case in the example BS2 program given in the Example Programs section below). Percent error and conversion constant calculations are introduced in Chapter 2 of Smart Sensors and Applications, a Stamps in Class text available for download from the 28029 product page at .
v1.5 2/15/2008 Fra bibliotekage 2 of 12
Practical Considerations for Use
Object Positioning
The PING))) sensor cannot accurately measure the distance to an object that: a) is more than 3 meters away, b) that has its reflective surface at a shallow angle so that sound will not be reflected back towards the sensor, or c) is too small to reflect enough sound back to the sensor. In addition, if your PING))) sensor is mounted low on your device, you may detect sound reflecting off of the floor. a. b. c.
09201;中文规格书,Datasheet资料
• • • • • •
Premium metal expansion wrist strap Comfortable, designed not to pinch or pull hair Durable metal band Long wearing, easy to clean Superior contact with skin For reliable removal of generated static charges Non-flaking or scratching laminated insulator on all external surfaces Protects wearers from electrical hazards; provides many years of product life Medical grade 300 series stainless steel used for all metal parts Eliminates allergic skin reaction for most people UL Listed Note: This product is not recommended for use on equipment with operating voltage exceeding 250 VAC. CAUTION: The ESD Series is for electrostatic control. It will not reduce or increase your risk of receiving electric shock when using or working on electrical equipment. Follow the same precautions you would use without wrist straps, including: • Make certain that equipment having a grounding type plug is properly grounded. • Make certain that you are not in contact with grounded objects other than through the ESD Series. Date coded Providing lot tractability to ensure quality control Superior resistor connection strain relief Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Tested at over 1,000,000 cycles vs. the 16,000 requirement Covered by one or more of the following patents: Wristband: 5,036,423; 5,568,351 Coil Cord: 5,951,337 Superior warranty See details of 1 year Limited Warranty at /Warranty.aspx Made in America
WP1533BQYD;中文规格书,Datasheet资料
分销商库存信息:
KINGBRIGHT WP1533BQ/YD
PACKING & LABEL SPECIFICATIONS
WP1533BQ/YD
SPEC NO: DSAF2053 APPROVED: WYNEC
REV NO: V.4 CHECKED: Allen Liu
DATE: APR/07/2011 DRAWN: J.Yu
PAGE: 4 OF 5 ERP: 1102000844
/
SPEC NO: DSAF2053 APPROVED: WYNEC
REV NO: V.4 CHECKED: Allen Liu
DATE: APR/07/2011 DRAWN: J.Yu
PAGE: 5 OF 5 ERP: 1102000844
/
SPEC NO: DSAF2053 APPROVED: WYNEC
REV NO: V.4 CHECKED: Allen Liu
DATE: APR/07/2011 DRAWN: J.Yu
PAGE: 1 OF 5 ERP: 1102000844
/
Selection Guide
Description
The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode.
Package Dimensions
Yellow
WP1533BQ/YD
SPEC NO: DSAF2053 APPROVED: WYNEC
REV NO: V.4 CHECKED: Allen Liu
0191930089;中文规格书,Datasheet资料
This document was generated on 08/09/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19193-0089Status:ActiveOverview:Ring Tongue - Spade TerminalsDescription:VersaKrimp™ Ring Tongue Terminal for 14-16 AWG WireDocuments:Drawing (PDF)Product Specification PS-19902-013 (PDF)Product Specification PS-19902-011 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR18689ULE32244GeneralProduct Family Ring and Spade Terminals Series19193Crimp Quality Equipment Yes Mil-Spec N/AOverviewRing Tongue - Spade Terminals Product Name VersaKrimp™Type RingUPC800755049244PhysicalBarrel Type Closed - Brazed InsulationNone Material - Plating Mating Tin Net Weight0.780/g Packaging Type Bag Stud Size8 (M4)Wire Size AWG 14, 16Wire Size mm²1.30 -2.00Material InfoOld Part NumberBB-339-08Reference - Drawing NumbersProduct Specification PS-19902-011, PS-19902-013Sales DrawingBBCD30101Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19193SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Hand Crimp Tool 0640030100Crimp Head for the AT-200™ Pneumatic Hand Tool0640070100This document was generated on 08/09/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0191930089。
0190850009;中文规格书,Datasheet资料
This document was generated on 08/10/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19085-0009Status:ActiveOverview:Ring Tongue - Spade TerminalsDescription:Open Barrel Ring , Tin-Plated Steel, for 14-18 AWG Wire, Stud Size 10 (M5)Documents:Drawing (PDF)Product Specification PS-19902-011 (PDF)Product Specification PS-19902-006 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR18689ULE32244GeneralProduct Family Ring and Spade Terminals Series19085Crimp Quality Equipment Yes Mil-Spec N/AOverviewRing Tongue - Spade Terminals Product Name N/A Type RingUPC800755080322PhysicalBarrel Type Open InsulationNone Material - Plating Mating Tin Net Weight0.770/g Packaging Type Reel Stud Size10 (M5)Temperature Range - Operating 149°C Wire Insulation Diameter N/AWire Size AWG 14, 16, 18Wire Size mm²0.80 - 2.00ElectricalVoltage - Maximum2000V Material InfoOld Part NumberRZ-S-4129-10Reference - Drawing NumbersProduct Specification PS-19902-006, PS-19902-011Sales DrawingSD-19085-002Series image - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19085SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #ASP Perishable Tool Kit used in ASP presses that process metal strip product 0190290053Mini-Mac™Applicator0638815600This document was generated on 08/10/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0190850009。
0917162013;中文规格书,Datasheet资料
This document was generated on 08/27/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:91716-2013Status:ActiveOverview:RAST 2.5 Connector SystemDescription:2.50mm Appli-Mate RAST 2.5 IDT Housing, Direct/Indirect, Female, 7 Circuits,Removed Position Keys B, D, E, F & HDocuments:3D ModelApplication Specification AS-99033-0008 (PDF)Drawing (PDF)Packaging Specification PK-90871-001 (PDF)Product Specification PS-99020-0040 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family IDT and Solder Connectors Series91716Crimp Quality Equipment YesOverviewRAST 2.5 Connector System Product Name RAST 2.5UPC 822350166447Use WithRAST standard interface PhysicalCircuits (Loaded)6Circuits (maximum)6Color - ResinNatural (White)Durability (mating cycles max)10Flammability 94V-0GenderFemale Glow-Wire Compliant No Lock to Mating Part NoneMaterial - MetalPhosphor Bronze Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight1.704/g Number of Rows 1Packaging Type Tray Panel MountNoPitch - Mating Interface2.50mm Pitch - Termination Interface 2.50mm Plating min - Mating1.016µm Plating min - Termination 1.016µm Polarized to Mating Part No StackableNoTemperature Range - Operating -20°C to +85°C Termination Interface: Style IDT or Pierce Wire Size AWG22, 24ElectricalCurrent - Maximum per Contact 2A, 4A Voltage - Maximum32V ACMaterial InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 91716SeriesMates WithAppli-Mate RAST 2.5 Header 90861 , 90860Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #RAST 2.5 Semi-AutomaticTerminator Machine0623006200Reference - Drawing NumbersApplication Specification AS-99033-0008Packaging Specification PK-90871-001Product Specification PS-99020-0040Sales Drawing SD-91716-001This document was generated on 08/27/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0917162013。
0915BM15A0001E;中文规格书,Datasheet资料
分销商库存信息:
JOHANSON-TECHNOLOGY 0915BM15A0001E
High Frequency Ceramic Solutions
915MHz Impedance Matched/Balun/BPF Integrated Component for T.I. CC110X, CC111X, CC113X and CC115X, CC110L, CC113L, CC115L and CC430 Detail Specification: 4/11/2012
freq, GHz
dif_amplitude
Amplitude & Phase Difference
2
180
1
90
dif_phase
0
0
-1
-90
-2
-180
0.7 0.8 0.9 1.0 1.1 1.2
freq, GHz
Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions.
2For more info go to /silverleads
Part Number Explanation
Bulk
Packaging Style
P/N
T&R
Suffix = S Suffix = E
Eg. 0915BM15A0001S Eg. 0915BM15A0001E
Recommended Storage Conditions
19665;中文规格书,Datasheet资料
Dual-Wire Dual-Operator Programmable Monitor DescriptionThe patented* Desco Dual-Wire Dual-OperatorProgrammable Monitor monitors two operators and two ESD work worksurfaces eliminating the need for periodic Figure 1. Desco 19665 Dual-Wire Dual-Operator Programmable MonitorFeatures and ComponentsTECHNICAL BULLETIN TB-3019Made in theUnited States of AmericaFigure 2. Dual-Wire Dual-Operator Programmable CBDE FG H I J K LFRONT VIEWBACK VIEWOperation1. Monitoring of the operators will remain in the STANDBY condition until a wrist cord is plugged into the operator remote. STANDBY mode is indicated by a blinking yellow operator LED.10mm snap needs to pierce and clinch bottom side of mat. Snap needs to be at least 12" apart or 72" max. 10mm snap needs to pierce and clinch bottom side of mat. Snap needs to be at least 12" apart or 72" max.OPERATOR 1WORKSURFACEOPERATOR 2WORKSURFACE10mm PUSH & CLINCH SNAP10mm PUSH & CLINCH SNAPBENCH GROUNDMAT 1 WIRING WHITE CABLEMAT 2 WIRING BLACK CABLEWRIST STRAP MONITORWRIST STRAP MONITORELECTRIC GROUNDOPERATOR 2REMOTE JACK BLACK CABLEOPERATOR 2REMOTE JACK WHITE CABLE Screw allows ground cord to be bolted to mat; keeps cord from disconnecting.Figure 3. Installing the Dual-Wire Dual-Operator Programmable MonitorororFigure 4. Connecting a dual-wire wrist strap to the operator remoteSETTING THE OPERATOR TEST VOLTAGE AND TEST LIMITThe Dual-Wire Dual-Operator Monitor’s operator test voltage and high test limit can be set to different values. The operator test voltage can be set to either +5V or +8V, and the operator high test limit can be set to either 10 megohms or 35 megohms. The default voltage is +8V, and the default operator high test limit is 10 megohms. These settings are controlled by a set of 3 switches located inside the monitor’s enclosure.NOTE: Desco recommends re-calibration of the monitor should either setting be changed. See the “Calibration” section for more information.To gain access to these switches, remove the monitor’s cover and position the monitor so the PCB matches the orientation shown in Figure 5. Switches SW1 and SW2 control the operator test voltage. Switch SW3 controls the operator high test limit.Operator Test Voltage+5VSW1 Position: RIGHTSW2 Position: LEFT+8VSW1 Position: LEFTSW2 Position: RIGHTOperator High Test Limit10 megohmsSW3 Position: RIGHT35 megohmsSW3 Position: LEFTCalibrationFrequency of recalibration should be based on the critical nature of those ESD sensitive items handled and the risk of failure for the ESD protective equipment and materials. In general, Desco recommends that calibration be performed annually.Use the EMIT 50524 Limit Comparator for Dual-Wire Monitors to perform periodic testing (once every 6-12 months) of the Dual-Wire Dual-Operator Programmable Monitor. The Limit Comparator can be used on the shop floor within a few minutes virtually eliminating downtime, verifying that the monitor is operating within tolerances. See TB-6542 for more information.Figure 5. Switches SW1, SW2 and SW3 inside the monitor’s enclosure Figure 6. EMIT 50524 Limit Comparator for Dual-Wire MonitorsNIST CalibrationDesco provides a basic, National Institute of Standardsand Technology (NIST) traceable calibration for theproducts that we manufacture. This is sometimesreferred to as a Level 1 calibration.For more on National Institute of Standards andTechnology see:/index.htmlFor more information on the calibration that Desco’sprovides for products that we manufacture see:/Calibration.aspxSpecificationsOperating Voltage 12 VDCOperating Temperature 32°F - 104°F (0 - 40°C)Monitor Dimensions 4.4" x 4.7" x 2.1"(11.2cm x 11.9cm x 5.3cm)Monitor Weight 1.1 lbs (0.5 kg)TEST VOLTAGESOperator +8 V** or +5 VWorksurface 200 mVTEST LIMITSOperator Low Fail: < 1.72 megohmsPass: 2 - 9 megohms**High Fail: > 11.5 megohms**orPass: 2 - 30 megohmsHigh Fail: > 40 megohmsWorksurface Pass: < 3.5 megohmsFail: > 3.8 megohms**DefaultFigure 7. Operator Remote dimensionsReplacement remotes are available as EMIT itemnumbers 50525 and 50526.分销商库存信息: DESCO19665。
0190350009;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19035-0009Status:ActiveDescription:Avikrimp™ Snap Plug, for 14-16 AWG Wire, Box, 22.55mm LengthDocuments:Drawing (PDF)Product Specification PS-19902-013 (PDF)Product Specification PS-19902-011 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR18689ULE152602GeneralProduct Family Quick Disconnects Series19035CommentsMolded Nylon Insulation Crimp Quality Equipment Yes MolexKitsYesProduct Name Avikrimp™Type Snap PlugUPC800753047921PhysicalBarrel Type Closed Color - Resin Natural Flammability 94V-2GenderMale Glow-Wire Compliant NoInsulationNylon (PA)Lock to Mating Part None Material - Metal Copper Material - Resin Nylon Net Weight 1.526/g OrientationStraight Packaging Type Bag Tab Thickness N/A Tab WidthN/AWire Insulation Diameter 4.32mm max.Wire Size AWG 14, 16Wire Size mm²1.30 -2.00ElectricalVoltage - MaximumN/A Material InfoOld Part NumberB-589Reference - Drawing NumbersProduct Specification PS-19902-011, PS-19902-013Sales DrawingSD-19035-001Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19035SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #PremiumGrade™Hand Crimp Tool0640010100Crimp Head for the AT-200™ Pneumatic Hand Tool0640050100This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0190350009。
0190110036;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19011-0036Status:ActiveDescription:InsulKrimp™ Piggyback Quick Disconnect, Tab 6.35 x 0.81mm, 18-22 AWG, Red Insulator, ReelDocuments:Drawing (PDF)Product Specification PS-19902-011 (PDF)Product Specification PS-19902-008 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR18689ULE79133GeneralProduct Family Quick Disconnects Series19011Crimp Quality Equipment YesProduct Name InsulKrimp™Type Quick Disconnect UPC822350948753PhysicalBarrel Type Closed Color - Resin Natural Flammability 94V-0GenderFemale Glow-Wire Compliant No InsulationPVC Lock to Mating Part No Material - Resin PVC Net Weight 1.026/g OrientationStraight Packaging TypeReel Polarized to Mating Part Yes Tab Thickness 0.81mm Tab Width6.35mm Temperature Range - Operating 105°CWire Insulation Diameter 2.79mm max.Wire Size AWG 18, 20, 22Wire Size mm²0.35 - 0.80ElectricalVoltage - Maximum600V AC Material InfoOld Part NumberAA-2301TReference - Drawing NumbersProduct Specification PS-19902-008, PS-19902-011Sales DrawingSD-19011-004Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHC Not ReviewedLow-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19011SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Crimp Dies for MTA-105 Tape Applicator used in TM-2000™ Press,and ATP-301 Air Crimping Press for Mylar Tape Mounted Terminals0198002120This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0190110036。
0190190051;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:19019-0051Status:ActiveDescription:Avikrimp™ Quick Disconnect, Female, for 12-14 (3.30-2.00mm²) Wire, Mylar Tape, Tab 4.75 x 0.51mmDocuments:Drawing (PDF)Product Specification PS-19902-015 (PDF)Product Specification PS-19902-011 (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-19902-014 (PDF)Agency CertificationCSA LR18689ULE79133GeneralProduct Family Quick Disconnects Series19019Crimp Quality Equipment YesProduct Name Avikrimp™Type Quick Disconnect UPC800753038554PhysicalBarrel Type Closed Flammability 94V-2GenderFemale Glow-Wire Compliant NoInsulationNylon (PA)Lock to Mating Part None Material - Metal Brass Net Weight 1.020/g OrientationStraightPackaging TypeAdhesive Tape on Reel Polarized to Mating Part NoTab Thickness 0.51mm Tab Width4.75mmTemperature Range - Operating -65°C to +105°C Wire Insulation Diameter 4.30mm max.Wire Size AWG 12, 14Wire Size mm²2.00 -3.30ElectricalVoltage - Maximum300V Material InfoOld Part NumberP-8139TReference - Drawing NumbersProduct Specification PS-19902-011, PS-19902-014, PS-19902-015Sales DrawingSD-19019-001Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 19019SeriesApplication Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Crimp Dies for MTA-100 Tape Applicator used in 3BF Press, MTA-105Tape Applicator used in TM-2000™ Press,and ATP-301 Air Crimping Press for Mylar Tape Mounted Terminals 0192880254Mini-Mac™Applicator0638853100This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0190190051。
0917161514;中文规格书,Datasheet资料
This document was generated on 08/07/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:91716-1514Status:ActiveOverview:RAST 2.5 Connector SystemDescription:2.50mm Appli-Mate RAST 2.5 IDT Housing, Direct/Indirect, Female, 6 Circuits,Polarizing Rib Between Circuits 1 & 2Documents:3D ModelApplication Specification AS-99033-0008 (PDF)Drawing (PDF)Packaging Specification PK-90871-001 (PDF)Product Specification PS-99020-0040 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family IDT and Solder Connectors Series91716Crimp Quality Equipment YesOverviewRAST 2.5 Connector System Product Name RAST 2.5UPC 822348367931Use WithRAST standard interface PhysicalCircuits (Loaded)4Circuits (maximum)4Color - ResinNatural (White)Durability (mating cycles max)10Flammability 94V-0GenderFemale Glow-Wire Compliant No Lock to Mating Part NoneMaterial - MetalPhosphor Bronze Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight1.399/g Number of Rows 1Packaging Type Tray Panel MountNoPitch - Mating Interface2.50mm Pitch - Termination Interface 2.50mm Plating min - Mating1.016µm Plating min - Termination 1.016µm Polarized to Mating Part Yes StackableNoTemperature Range - Operating -20°C to +85°C Termination Interface: Style IDT or Pierce Wire Size AWG22, 24ElectricalCurrent - Maximum per Contact 2A, 4A Voltage - Maximum32V ACMaterial InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 91716SeriesMates WithAppli-Mate RAST 2.5 Header 90861 , 90860Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #RAST 2.5 Semi-AutomaticTerminator Machine0623006200Reference - Drawing NumbersApplication Specification AS-99033-0008Packaging Specification PK-90871-001Product Specification PS-99020-0040Sales Drawing SD-91716-001This document was generated on 08/07/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0917161514。
0945120301;中文规格书,Datasheet资料
This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:94512-0301Status:ActiveDescription:Quick Disconnect, High Reliability Terminal (HRT), Female for (2.50-6.00mm²) 4-12AWG Wire, Accepts 6.30 x 0.81mm TabDocuments:Drawing (PDF)RoHS Certificate of Compliance (PDF)GeneralProduct Family Quick Disconnects Series94512Crimp Quality Equipment Yes Product Name N/AType Quick Disconnect UPC800754313940PhysicalBarrel Type Open GenderFemale Glow-Wire Compliant No InsulationNone Lock to Mating Part None Material - MetalBrass Material - Plating MatingTin Material - Plating Termination Tin Net Weight 0.890/g OrientationStraight Packaging TypeReel Polarized to Mating Part Yes Tab Thickness 0.81mm Tab Width6.35mmTemperature Range - Operating -25°C to +55°CTermination Interface: Style Crimp or Compression Wire Size AWG 10, 12Wire Size mm²2.50 - 6.00ElectricalVoltage - Maximum250VMaterial InfoReference - Drawing NumbersSales DrawingSD-94512-004Seriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 94512SeriesUse With94090 Quick Disconnect Housing Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #Hand Tool 0638250700This document was generated on 08/13/2012PLEASE CHECK FOR LATEST PART INFORMATION/分销商库存信息: MOLEX 0945120301。
- 1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
- 2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
- 3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。
A. Right angle barrel type banana plug with patented* machined contour spring support. Fits industry standard banana jack ≥ .157”. Will maintain greater than 1 pound disengagement force over the life of the cord. B. Crimped termination to stranded conductor. C. Thermoplastic elastomer strain relief molded on. Bending Life Test average >50,000,000 cycles per ANSI/ESD S20.20 (Tested per ESD S1.1). Break load average 30 pounds. D. Polyurethane wire insulation in Jewel® Sapphire color. Rapid retraction coil cord compresses length with resulting benefit of less tangling and dragging along work surface. Break load average 30 pounds. E. Tinsel conductor. Consisting of polyester wrapped with copper. High flex life. Equivalent is 29 gauge (cir mil and/or Ohms). F. Autosplice brass crimp secures conductors to resistor lead and provides stress relief for resistor. G. One megohm ±5%, 1/4 watt, series resistor limits current for operator safety. H. Spring loaded 4mm medical snap socket. Spring separation .125” - .165”. Provides 1-5 pound breakaway from .160” snap stud (EOS/ESD-S1).
*U.S. Patent 5951337
See drawing 09105 for wristband specifications.
Made in America
GROUND CORD, WRIST STRAP, RAPID RETRACTION,WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: PHONE (909) 627-8178 FAX (909) 627-7449 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172
DRAWING NUMBER 09150
DATE: August 2009
© 2009 DESCO INDUSTRIES INC.
Employee Owned
/
分销商库存信息:
DESCO 09150 09151
ITEM 09150 09151 Retracted Length X 10” 16” Y 27” 33” Extended Length Nominal 6’ 10’ Max 8.5’ 13’
Compatible with most major brands. I. Jewel® logo molded in compliance with EOS/ESD-S1. J. Date coded with date of manufacture. K. Underwriters Laboratory Listing 90P1C when used with Desco 09025, 09026, 09027, 09028, 09041, 09043, 09044, 09045, or 14840 wristbands. L. Right angle design has lower profile, making it less likely to be snagged and accidentally pulled out. Swivels on banana barrel for less strain - extending the life of the cord. M. Ribbed molding assists grasping of right angle banana plug. The plug will not be removed by tugging on cord.