GPAF1605中文资料

合集下载

FQPF5N60中文资料

IS
Maximum Continuous Drain-Source Diode Forward Current
--
--
2.8
A
ISM
Maximum Pulsed Drain-Source Diode Forward Current
--
--
11.2
A
VSD
Drain-Source Diode Forward Voltage VGS = 0 V, IS = 2.8 A
Bottom : 5.5 V
100
ID , Drain Current [A]
DS(ON) R [Ω ], Drain-Source On-Resistance
10-1 10-1
※ Notes : 1. 250μ s Pulse Test 2. TC = 25℃
100
101
VDS , Drain-Source Voltage [V]
Features
• 2.8A, 600V, RDS(on) = 2.0Ω @VGS = 10 V • Low gate charge ( typical 16 nC) • Low Crss ( typical 9.0 pF) • Fast switching • 100% avalanche tested • Improved dv/dt capability • TO-220F package isolation = 4.0kV (Note 6)
©2002 Fairchild Semiconductor Corporation
Rev. B, June 2002
元器件交易网
FQPF5N60
Typical Characteristics

韩国LG PC所有产品牌号

韩国LG- Lupoy所有产品型号平川塑胶现货提供以下产品，咨询QQ623395653韩国LG-Lupoy 1080-70韩国LG-Lupoy 1200-03韩国LG-Lupoy 1200-08韩国LG-Lupoy 1200-10韩国LG-Lupoy 1200-15韩国LG-Lupoy 1200-15韩国LG-Lupoy 1200HP-15韩国LG-Lupoy 1201-05韩国LG-Lupoy 1201-08韩国LG-Lupoy 1201-10韩国LG-Lupoy 1201-15韩国LG-Lupoy 1201-18韩国LG-Lupoy 1201-22韩国LG-Lupoy 1201HP-21韩国LG-Lupoy 1201HP-22韩国LG-Lupoy 1206-03韩国LG-Lupoy 1300-03韩国LG-Lupoy 1300-10韩国LG-Lupoy 1300-12韩国LG-Lupoy 1300-15韩国LG-Lupoy 1300-22韩国LG-Lupoy 1301-10韩国LG-Lupoy 1301-12韩国LG-Lupoy 1301EP30韩国LG-Lupoy 1301V-10韩国LG-Lupoy 1301V-7韩国LG-Lupoy 1302-05韩国LG-Lupoy 1302-07韩国LG-Lupoy 1302-10韩国LG-Lupoy 1302EP-30韩国LG-Lupoy 1302HP-07韩国LG-Lupoy 1302HP-09韩国LG-Lupoy 1302HP-10韩国LG-Lupoy 1302HP-21韩国LG-Lupoy 1302HP-22韩国LG-Lupoy 1302HP-22韩国LG-Lupoy 1302UV-08韩国LG-Lupoy 1303-07韩国LG-Lupoy 1303-10韩国LG-Lupoy 1303-15韩国LG-Lupoy 1303AH-10韩国LG-Lupoy 1303AH-15韩国LG-Lupoy 1320C-07韩国LG-Lupoy 1600-03韩国LG-Lupoy 1603-06韩国LG-Lupoy 1621-02韩国LG-Lupoy 3010-10韩国LG-Lupoy 3010-15韩国LG-Lupoy 3010-22韩国LG-Lupoy 3010-30韩国LG-Lupoy 3030-30韩国LG-Lupoy 3030-10韩国LG-Lupoy 3030-15韩国LG-Lupoy EC5000A PC/PBT? 韩国LG-Lupoy EC5000AF PC/ABS 韩国LG-Lupoy EF1006F韩国LG-Lupoy EF5001RFT PC/ABS? 韩国LG-Lupoy ER5001RF PC/ABS? 韩国LG-Lupoy ER5001RFA PC/ABS 韩国LG-Lupoy ER5151RFA PC/ABS 韩国LG-Lupoy EU5000 PC/ASA韩国LG-Lupoy EU5008 PC/ASA 韩国LG-Lupoy GN1000F PC/ABS 韩国LG-Lupoy GN1000FA PC/ABS 韩国LG-Lupoy GN1002FC韩国LG-Lupoy GN1002FH韩国LG-Lupoy GN1002FH韩国LG-Lupoy GN1002FL韩国LG-Lupoy GN1002FS韩国LG-Lupoy GN1004FA韩国LG-Lupoy GN1006FL韩国LG-Lupoy GN1006FM韩国LG-Lupoy GN1006FMR韩国LG-Lupoy GN1006FT韩国LG-Lupoy GN1008RF韩国LG-Lupoy GN2101F韩国LG-Lupoy GN2101FC韩国LG-Lupoy GN2201FC韩国LG-Lupoy GN2201FM韩国LG-Lupoy GN2301F韩国LG-Lupoy GN5001EF PC/ABS 韩国LG-Lupoy GN5001RF PC/ABS 韩国LG-Lupoy GN5001RFD PC/ABS 韩国LG-Lupoy GN5001RFH PC/ABS 韩国LG-Lupoy GN5001RFJ PC/ABS韩国LG-Lupoy GN5001RFM PC/ABS 韩国LG-Lupoy GN5001RFP PC/ABS 韩国LG-Lupoy GN5001RFS PC/ABS 韩国LG-Lupoy GN5001RFT PC/ABS 韩国LG-Lupoy GN5001SF PC/ABS 韩国LG-Lupoy GN5007FL PC/ABS 韩国LG-Lupoy GN5008HF PC/ABS 韩国LG-Lupoy GN5008LF PC/ABS 韩国LG-Lupoy GN5009F PC/ABS 韩国LG-Lupoy GN5101RF PC/ABS 韩国LG-Lupoy GN5151RF PC/ABS 韩国LG-Lupoy GN5151RFA PC/ABS 韩国LG-Lupoy GN5201F PC/ABS 韩国LG-Lupoy GN5301F PC/ABS 韩国LG-Lupoy GP1000HU韩国LG-Lupoy GP1000L韩国LG-Lupoy GP1000LG韩国LG-Lupoy GP1000LS韩国LG-Lupoy GP1000M韩国LG-Lupoy GP1000MD韩国LG-Lupoy GP1000ML韩国LG-Lupoy GP1000MR韩国LG-Lupoy GP1000MU韩国LG-Lupoy GP1000SW韩国LG-Lupoy GP1006FL韩国LG-Lupoy GP1006FM韩国LG-Lupoy GP2100韩国LG-Lupoy GP2102韩国LG-Lupoy GP2200韩国LG-Lupoy GP2300韩国LG-Lupoy GP5001AF PC/ABS 韩国LG-Lupoy GP5006AF PC/ABS 韩国LG-Lupoy GP5006B PC/ABS 韩国LG-Lupoy GP5006BH PC/ABS 韩国LG-Lupoy GP5008A PC/ABS 韩国LG-Lupoy GP5008BF PC/ABS 韩国LG-Lupoy GP5008BFH PC/ABS 韩国LG-Lupoy GP5056F PC/ABS韩国LG-Lupoy GP5100 PC/ABS韩国LG-Lupoy GP5106F PC/ABS韩国LG-Lupoy GP5200 PC/ABS韩国LG-Lupoy GP5206F PC/ABS 韩国LG-Lupoy HG5000B PC/ABS 韩国LG-Lupoy HI1002MLLupoy HI5002A PC/ABS Lupoy HP5004 PC/ABS Lupoy HP5004A PC/ABS Lupoy HP5004HF PC/ABS Lupoy HP5008 PC/ABS Lupoy HR5007A PC/ABS Lupoy HR5007AE PC/ABS Lupoy MP5000AM PC/ABS Lupoy NF1005F 03RLupoy NF1007F 10RLupoy NF1009F 08RLupoy NF1009F 15 Lupoy NS5000 PC/ABS Lupoy NS5000C PC/ABSLupoy RF3208FLupoy SC1004ALupoy SC1004AULupoy SC1004LLupoy SC1004MLLupoy SC2202Lupoy SC2302Lupoy SC3154Lupoy SC5004T Lupoy SG5009F PC/ABS?Lupoy SR3108FCLupoy SR3108FMLupoy SR3108L。

洛克威爾自動化 PowerFlex 750 系列交流變頻器技術資料说明书

技術資料PowerFlex 750 系列交流變頻器原始說明主題頁次其他資源2產品概述2認證和規格6設計考量11保險絲及斷路器額定值36電纜考量事項59馬達考量事項61尺寸及重量64變頻器選項1152洛克威爾自動化出版品 750-TD001H-ZC-P - 2013 年 6 月PowerFlex 750 系列交流變頻器其他資源這些文件包含與洛克威爾自動化產品相關的其他資訊。

您可以至以下網址檢視或下載出版品：/literature/。

若要訂購書面的技術文件，請向本地 Allen-Bradley 自動化經銷商或洛克威爾銷售代表洽詢。

產品概述PowerFlex 750 系列是功能強大的交流變頻器系列，不僅易於使用，而且為眾多不同的工業應用系統提供絕佳彈性及效能。

PowerFlex 753 提供的一般用途控制器適用於功率最高達 350HP 及250kW 的應用系統。

PowerFlex 755 提供高達 2000HP 及 1500kW 的最大彈性及效能。

以下是 PowerFlex 750 系列具備的重要功能，善用這些功能所帶來的優勢可大幅提高產能。

•DeviceLogix ™ — 內嵌式控制器技術，支援離散輸出及變頻器控制功能之操作，變頻器更內建離散輸入和變頻器狀態資訊。

•預測診斷系統 — 讓變頻器隨時掌握影響冷卻風扇使用壽命及繼電器輸出的資訊。

此外，亦可編輯變頻器的程式，以監控機器或馬達軸承的運行時間。

•選項卡 — 每個變頻器都具備插槽式架構。

提供兩種產品共通的硬體控制選項，有助您降低庫存及零件的需求。

•安全扭力關斷及安全速度監控 — 可根據您的應用系統需求提供安全層級的選擇。

•通訊 — PowerFlex 755 附帶內建乙太網路連接埠。

可利用通訊模組輕鬆新增乙太網路至 PowerFlex 753。

•I/O — 適用額外類比和離散 I/O 之選項卡。

PowerFlex 753 附帶內建 I/O ，可透過選項卡輕鬆擴充。

PBU605中文资料

@ TC = 100°C
Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method)
Forward Voltage (per element)
· Polarity: As Marked on Case
· Mounting: Through Hole for #6 Screw
H
· Mounting Torque: 5.0 Inch-pounds Maximum
· Weight: 8.0 grams (approx.)
· Mounting Position: Any
DS21307 Rev. F-2
1 of 2
PBU601 - PBU607
元器件交易网
6 5
I(AV), AVERAGE OUTPUT CURRENT (A)
4 3
2
1 0 250
Single Phase Half Wave 60 Hz Resistive or Inductive Load
P
1.20
1.30
All DimensionБайду номын сангаас in mm
Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified
Single phase, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.

JMF605 Data Sheet V1.2

Author
M
© Copyright JMicron Technology, 2011. All Rights Reserved. Printed in Taiwan 2011 JMicron and the JMicron Logo are trademarks of JMicron Technology Corporation in Taiwan and/or other countries. Other company, product and service names may be trademarks or service marks of others. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use implantation or other life supports application where malfunction may result in injury or death to persons. The information contained in this document does not affect or change JMicron’s product specification or warranties. Nothing in this document shall operate as an express or implied license or environments, and is presented as an illustration. The results obtained in other operating environments may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIEDE ON AN “AS IS” BASIS. In no event will JMicron be liable for damages arising directly or indirectly from any use of the information contained in this document. JMicron Technology Corporation 1F, No.13, Innovation Road 1, Science Based Industrial Park Hsinchu, Taiwan, R.O.C For more information on JMicron products, please visit the JMicron web site at or send email to sales@

ALINCO 605说明书转贴

1.左边的小旋钮是调节VHF音量的，在下面称之为VHF,右边的小旋钮是调节UHF音量的，在下面称之为UHF2.两种显示方式：信道模式（CH模式）频率模式：VFO,压控振荡器模式,频率可连续调节Menmory,记忆模式（频率和信道CH同时显示） Call模式,V段U段的频率模式可分别选择,互不影响启动CH模式，V/M＋VHF＋PWR（同时按住V/M和VHF开电源）关闭启动CH模式，V/M＋call＋PWR（同时按住V/M和UHF开电源）3.双段机工作时UV段可同时接受,在同一时间内只有一个波段可以发射,称之为主波段main-band,另一个成为次波段sub-band,分别按vhf和uhf选择.4.按键的含义(括号里为第二功能):V/M(MW),VFO模式/Memory记忆模式(Menory write记忆模式写入) Mhz(shift),M赫兹位(shift,频率偏移,异频收发,可以+_或同频) Monitor(T.SQL),监视,即屏蔽静噪功能直接接受,(亚音频及亚音频静噪) T.O.T(LOCK),发射时长限制(锁键) CAll(H/L),call信道(高低功率转换)5.面板按钮有三种功能,通过三种方式操作:直接按下并放开FUNC(功能,以下简称F)之后按住F(不放)首要功能直接按下列键,对应的功能:VHF,选择vhf作为主波段,并可在异频收发时按照1Mhz快速调整频差(_) UHF,选择UHF作为主波段,并可在异频收发时按照1Mhz快速调整频差(+) PWR(电源开关) DAIL(大旋钮) ,当VFO模式时改变频率,记忆模式或信道模式时改变信道CH V/M.在VFO模式和Menory记忆模式之间切换Mhz,按下之后,大旋钮按照1Mhz的步进改变MONITOR,屏蔽静噪功能,直接收听(适用于弱信号的收听),启动发射限时功能(防止发射时间过长损坏发射机) CALL,调出call频道第二功能:先按F键,放开,当屏幕上显示F时,按下下列键,出现对应功能: VHF,降低主波段的静噪阀值(注意,在调整静噪之前首先把希望调整的波段设为主波段) UHF,提高主波段的静噪阀值DAIL(大旋钮),改变记忆模式的信道CH编号V/M(MW),在VFO模式下,把当前频率写入所选的信道CH/在记忆Memory模式下,按此键,则当前CH在扫描时将被跳过,称之为skip Mhz(shift),选择异频收发的方式(+或_)和频差,按下F键,当屏幕显示F时,按此键,轮流显示+_和空,表示,正差,负差和不差频MONITOR(监视T.sql),启动亚音频编码器(机器自带,标准配置)和亚音频静噪功能. TOT(LOCK),按下F键,当屏幕显示F时,按此键显示T,表示开启了亚音频编码,同时显示出亚音频的频率,注意,是亚音频编码不是解码CALL(H/L),切换大小功率第三功能按住F键不放,再按相应的键VHF,启动9600bps数传模式,再次重复同样操作关闭该功能(AES,AON机器此功能正常,8EU,007机器进入数传模式后无法推出,只能复位) UHF,开/关操作提示音(哔哔音) DAIL(大旋钮),选择要保存的跨段收发的信道号CH V/M(MW),再VFO模式下,按此键把跨段频率写入所选的信道CH,主波段main-band是接受频率,次波段sub-band是发射频率Mhz(shift),进入步进设置,可选5 10 12.5.....50khz CAll(H/L),进入菜单6.开机功能按住相应键开机(PWR) VHF+PWR,启动跨段中继UHF+PWR,关闭跨段中继FUNC+PWR,整机复位V/M+VHF,开机,选择信道CH显示模式,不显示频率; V/M+CALL,开机,关闭信道CH显示模式V/M+MONITOR,开机,启动克隆模式,可将一台605的设置复制到另一台7.屏幕显示:F,可以按功能键进行设置,如无操作,5秒后消失T,亚音频编码启动,T.SQL亚音频静噪功能启动Mhz位小数点,闪烁表示正在扫描,消失表示当前CH是skip信道,扫描时将被跳过音频小数点(在100khz和10khz之间),一方面作为亚音频显示的小数点,当Mhz位小数点和音频小数点同时闪烁时表示正在忙模式扫描(busy mode)8.记忆模式信道存储(可保存收,发频,频率步进,异频偏移方向,大小,亚音频状态和大小)同频收发选择主波段调节频率(用大旋钮和Mhz可按Mhz和当前步进调节) 按F 用大旋钮选择希望保存的信道CH 按V/M(MW),保存-----------------------须在屏幕显示F时进行,如无操作,5秒后消失,如F消失,可重复上诉操作同段异频收发设置选择主波段调节接收频率(用大旋钮和Mhz可按Mhz和当前步进调节) 按F,在屏幕显示F时,按MHz(shift)键选择差频的方向(按MHzshift键依次显示- + 和空白),用大旋钮和VHFUHF(1MHZ步进)调整差频大小按F保存差频再按F键, 用大旋钮选择希望保存的信道CH 按V/M(MW),保存,屏幕显示+或-,表示这是一个收发异频的信道,同时标示了发频是+还是-跨段收发设置在次波段调整发射频率在主波段调整接受频率按下F键不放,用大旋钮选择希望保存的信道CH 按V/M(MW),保存---------在按下F键选择CH和按V/M保存的过程中,F 键始终按下不放. 屏幕同时显示+_,表示这是一个跨段信道*注:同段异频收发可在VFo模式和记忆模式下使用,跨段收发只能在记忆模式下使用(也许可以在纯信道显示模式下使用,没试)亚音频的设置在上诉各设置过程中,在保存之前,按F键,MONIRTOR(T.SQL),屏幕显示T表示亚音频启动(按动MONIRTOR/T.SQL,T轮流显示和消失,表示启动和关闭),同时可用大旋钮选择亚音频率删除信道在MOEMORY记忆模式下选择希望删除的信道按住F,按V/M9.三种扫描模式波段扫描,进入VFO模式,按手柄的up/down键1至2秒,按照机器设置的步进扫描整个波段,Mhz位小数点闪烁记忆模式扫描,进入记忆MEMORY模式,按手柄的up/down 键1至2秒,扫描所有的记忆模式的信道(可以选择某些信道不被扫描,即skip) 音调扫描,可扫描中继台使用的亚音频,需要安装亚音频解码器,在VFo模式下,按F,MONITOR(T.SQL)直到屏幕显示T.QSL(表示亚音频解码功能启动),按手柄上的UP/DOWN键主次两个波段可以同时扫描,并且扫描过程中可以切换主波段10.两种扫描恢复(释放)方式Timer定时模式,信号消失2秒或停顿达5秒之后释放,Mhz小数点闪烁busy忙模式,信号消失2秒之后释放,Mhz和100Khz位小数点同时闪烁两种释放方式的区别,busy模式只要信号持续,就不会释放,始终停留在此,而Timer模式即使有接受信号,在一定时间后(5秒)也会释放,继续扫描其它频率和信道.11. T.O.T发射限时功能按下T.O.T键,显示t oFF,再按显示p ,前者是表示限制连续发射的时间,用大旋钮可以选择off(不起作用),30 60 90...450秒后者用大旋钮选择被强制停止发射之后的恢复时间(即可以再次发射的时间)12.爆破音用于进入欧洲中继台,按下PTT,按手柄down键,发出单音(一般为1750hz)13.菜单设置按下F不放,按CAll键启动菜单大旋钮选择菜单项,共四项: *stup,扫描释放,b--busy忙模式/t--定时模式*爆破音频率:1750 2100 1450 *BCLO, 忙信道锁定: 关闭BCLO1 --在有接受信号时禁止发射(避免打架) BCLO2---在亚音频静噪启动时工作,只有收到同组其它亚音编码时才允许发射BCLO3---在亚音频静噪启动时工作,只有收到一个确定音调时才允许发射在CH显示信道模式下是否允许MONITOR监听功能和LOCK锁键ff--都不用EnbL n,打开监听功能EnbL L,打开锁键功能EnbL nL,两个功能都打开。

1056Na-钠表中文手册

2.1 通用要求 ........................................................................................................................................ 10 2.2 机箱安装 ........................................................................................................................................ 10 2.3 流路系统连接 ................................................................................................................................ 11 2.4 排放连接 ........................................................................................................................................ 11 2.5 氨气连接 ........................................................................................................................................ 11 2.6 电极安装 ........................................................................................................................................ 12

ISPPAC-POWR605-01SN24I;中文规格书,Datasheet资料

/
1
DS1034_01.3
ProcessorPM-POWR605 Data Sheet
Figure 1. ProcessorPM-POWR605 Block Diagram
VCC
ProcessorPM-POWR605
Power Down Logic IN1_PWRDN IN2 VMON1 6 Analog Voltage Monitor Inputs VMON2 VMON3 VMON4 VMON5 VMON6 PLD 16 Macrocells 28 Inputs IN_OUT1 IN_OUT2 IN_OUT3 IN_OUT4 IN_OUT5
The diagram above shows how a ProcessorPMPOWR605 is used in a typical application. It controls power to the microprocessor system, generates the CPU reset and monitors critical power supply voltages, generating interrupts whenever faults are detected. It also provides a watchdog timer function to detect CPU operating and bus timeout errors. The ProcessorPM-POWR605 incorporates a 16-macrocell CPLD. Figure 1 shows the analog input comparators and digital inputs used as inputs to the CPLD array. The digital output pins providing the external control signals are driven by the CPLD. Four independently programmable timers also interface with the CPLD and can create delays and time-outs ranging from 32µs to 2 seconds. The CPLD is programmed using LogiBuilder™, an easy-to-learn language integrated into the PACDesigner® software. Control sequences are written to monitor the status of any of the analog input channel comparators or the digital inputs.

SA605DK中文资料

SA605DK中文资料CIRCUIT DESCRIPTIONThe SA605 is an IF signal processing system suitable for second IF or single conversion systems with input frequency as high as 1GHz. The bandwidth of the IF amplifier is about 40MHz, with 39.7dB(v) of gain from a 50? source. The bandwidth of the limiter is about28MHz with about 62.5dB(v) of gain from a 50? source. However, the gain/bandwidth distribution is optimized for 455kHz, 1.5k?source applications. The overall system is well-suited to battery operation as well as high performance and high quality products of all types.The input stage is a Gilbert cell mixer with oscillator. Typical mixer characteristics include a noise figure of 5dB, conversion gain of13dB, and input third-order intercept of -10dBm. The oscillator will operate in excess of 1GHz in L/C tank configurations. Hartley or Colpitts circuits can be used up to 100MHz for xtal configurations. Butler oscillators are recommended for xtal configurations up to 150MHz.The output of the mixer is internally loaded with a 1.5k? resistor permitting direct connection to a 455kHz ceramic filter. The input resistance of the limiting IF amplifiers is also 1.5k?. With most455kHz ceramic filters and many crystal filters, no impedancematching network is necessary. To achieve optimum linearity of the log signal strength indicator, there must be a 12dB(v) insertion loss between the first and second IF stages. If the IF filter or interstage network does not cause 12dB(v) insertion loss, a fixed or variable resistor can be added between the first IF output (Pin 16) and the interstage network.The signal from the second limiting amplifier goes to a Gilbert cell quadrature detector. One port of the Gilbert cell is internally driven by the IF. The other output of the IF is AC-coupled to a tuned quadrature network. This signal, which now has a 90° phase relationship to the internal signal, drives the other port of the multiplier cell.Overall, the IF section has a gain of 90dB. For operation at intermediate frequencies greater than 455kHz, special care must be given to layout, termination, and interstage loss to avoid instability.The demodulated output of the quadrature detector is available at two pins, one continuous and one with a mute switch. Signal attenuation with the mute activated is greater than 60dB. The mute input is very high impedance and is compatible with CMOS or TTL levels.A log signal strength completes the circuitry. The output range is greater than 90dB and is temperature compensated. This log signal strength indicator exceeds the criteria for AMPs or TACs cellular telephone.NOTE:dB(v) = 20log V OUT/V INDIP20:plastic dual in-line package; 20 leads (300 mil)SOT146-1SO20:plastic small outline package; 20 leads; body width 7.5 mm SOT163-1SSOP20:plastic shrink small outline package; 20 leads; body width 4.4 mm SOT266-1Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products,including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright,or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices,or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonablybe expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale.This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve designand supply the best possible product.Philips Semiconductors811 East Arques AvenueP .O. Box 3409Sunnyvale, California 94088–3409Telephone 800-234-7381DEFINITIONSData Sheet IdentificationProduct Status Definition Objective Specification Preliminary Specification Product Specification Formative or in Design Preproduction Product Full ProductionThis data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice.This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changesat any time without notice, in order to improve design and supply the best possible product.? Copyright Philips Electronics North America Corporation 1997All rights reserved. Printed in U.S.A.。

富士相机参数

富士F605参数重要参数∙机身特性：消费，卡片，长焦，广角∙有效像素：1600万∙显示屏尺寸：3英寸46万像素液晶屏∙光学变焦：15倍∙等效35mm焦距：24-360mm∙高清摄像：全高清（1080）∙传感器尺寸：（1/2）英寸EXR CMOS∙产品重量：约201g（仅机身），220g（包含电...∙防抖性能：光学防抖∙存储卡类型：SD/SDHC/SDXC卡∙机身颜色：红色，黑色，白色，香槟色∙续航能力：300张（根据CIPA标准）∙富士F605 x1∙电池充电器BC-45W x1∙锂电池NP-50 x1∙腕带x1∙USB数据线x1∙AV线x1∙CD-ROM x1∙说明书x1∙保修政策：全国联保，享受三包服务质保期为1年∙客服电话：手机：400-820-6300；固话：800-820-6300 （周一至周五：9:00-20:00；周六和周日：9:00-18:00）具体内容：富士产品用于产品销售日期起1年内，在中国（港澳台地区除外）可享有免费修理服务。

用户送交相机时，需持由经销商填写完整的保修卡“用户联”及有效的销售凭证。

如无此二者则需支付修理费用。

因使用不当，意外损坏或经由其它方式修理而引起的损坏，或任意涂改保修卡俱不在保修之列。

进入官网>>富士F605详细参数切换到传统表格版主要性能镜头特点显示功能快门性能闪光灯曝光控制拍摄性能操作功能存储性能接口性能电池性能外观设计相机附件保修信息主要性能∙发布日期：2011年08月∙机身特性：消费，卡片，长焦，广角∙操作方式：全手动操作∙传感器类型：EXR CMOS∙传感器尺寸：（1/2）英寸∙传感器描述：带原色滤镜∙有效像素：1600万∙光学变焦：15倍∙数码变焦：2倍∙最高分辨率：4608×3456∙图像分辨率：L：（4:3）4608×3456；（3:2）4608×3072；（16:9）4608×2592 M：（4:3）3264×2448；（3:2）3264×2176；（16:9）3264×1840S：（4:3）2304×1728；（3:2）2304×1536；（16:9）1920×1080<移动全景拍摄>360°垂直：11520×1624，水平：11520×1080180°垂直：5760×1624，水平：5760×1080120°垂直：3840×1624，水平：3840×1080∙高清摄像：全高清（1080）镜头特点∙等效35mm焦距：24-360mm∙镜头结构：10组12片∙镜头说明：富士龙镜头，实际焦距：f=4.4-66mm∙广角镜头：是∙长焦镜头：是∙镜头类型：伸缩式∙对焦方式：TTL对比检测AF∙对焦区域：中心，多重，追踪∙对焦辅助方式：对焦辅助灯∙对焦范围：广角：450mm-无穷远，长焦：2.5m-无穷远∙近拍距离：广角：50mm-3m，长焦：1.2m-3.0m∙最大光圈：F3.5-F5.3∙光圈范围：广角：F3.5-F7.1，长焦：F5.3-F11显示功能∙显示屏尺寸：3英寸∙像素及类型：46万像素液晶屏∙屏幕功能：高清屏快门性能∙快门类型：机械电子快门∙快门速度：自动模式：1/4-1/2000秒其它模式：8-1/2000秒闪光灯∙闪光灯类型：内置∙外接闪光灯(热靴)：否∙闪光模式：红眼修正关闭：自动，强制闪光，禁止闪光，慢同步。

铁克ト尼克电子科学研究院P6052双频谱宽度测试装置说明书

U.S . Sa les Prices FOB Be a ve rto n, O rego n Ple ase refe r to General Information pa g e
399
an d appr oxim a te ly 60 V in t he l 0X pos iti o n.
The P6053 is a miniature fast-ri se 1OX probe designed for Tektronix 7-Series vertical plug-in units having a nominal input capacitance of 15 to 24 pF. The probe has a push button for actuating the trace-identify function of the oscilloscope main frame.
ATTENUATION is lOX within 3%.
INPUT RESISTANCE is 10 megohms within 2%.
INPUT CAPACITANCE for the 3.5-foot probe is 9.5 pf within 0.5 pF; 12 pF within 0.5 pF for the six-foot vers ion.
ATTENUATION lOX with in 3%. INPUT RESISTANCE : l X position, 1 megohm within 2%; lOX osition, 10 megohms within 1.5%. INPUT CAPACITANCE for th e 3.5-foot probe is 113 pf in the 1X position, 14 pF within 1 pF in the lOX position. For the si x-foot version the input capa citance in the 1X position is 134 pF within 6 pF, the lOX position 16 pF within 1 pf. PROBE RISETIME for the 3.5-foot probe is :S;60 ns in the l X position, :S; 9 ns in the 1OX position. For the six-foot version : 1X position :S; 75 ns, lOX position :S; 11 ns. TYPICAL RISETIME of the 3.5-ft probe, 7403 Oscilloscope, and 7A18 Amplifier is 11 ns.

Parker Hannifin Corporation 管道配件分部产品说明书

Tube Fabricating EquipmentA broad selection of power and manual designs, from Parker’s Parflange ® flange and flare machines to presetting, bending, cutting/deburring equipment and more.Parker Hannifin Corporation Tube Fittings Division 3885 Gateway Blvd.Columbus, OH 43228phone 614 279 7070fax 614 279 Custom ProductsNon-cataloged products designed andmanufactured in days.Hydraulic Flanges and ComponentsSizes ............................. 3/4" through 3"Pressures ..................... Up to 6000 psiClamps and TubeClamps ............ Full range of inch and metric tube clamps Metric Tube ..... 6 mm through 42 mmPort and Conversion AdaptersSizes ....................... 1/4" through 1-1/2"Pressures ............... Up to 7700 psiENGINEERING YOUR SUCCESS.Stainless Steel T ube Fittings & EquipmentQuick Reference Guide© 2009 Parker Hannifin Corporation4300-QRG-SS11/2009Trap-Seal, Robust Port Stud and Seal-Lok are trademarks, and Triple-Lok,Ferulok and Parflange are registered trademarks of Parker Hannifin Corporation.North American Divisions Brass Products Division Otsego, MIphone 269 694 9411 fax 269 694 4614Energy Products Division Stafford, TXphone 281 566 4500 fax 281 530 5353Hose Products Division Wickliffe, OHphone 440 943 5700 fax 440 943 3129Industrial Hose Division Strongsville, OHphone 440 268 2120 fax 440 268 2230Parflex Division Ravenna, OHphone 330 296 2871 fax 330 296 8433Quick Coupling Division Minneapolis, MNphone 763 544 7781 fax 763 544 3418Tube Fittings Division Columbus, OHphone 614 279 7070 fax 614 279 7685Parker Fluid Connectors GroupNorth American Divisions & Distribution Service CentersDistribution Service Centers Buena Park, CAphone 714 522 8840 fax 714 994 1183Conyers, GAphone 770 929 0330 fax 770 929 0230Lakeville, MNphone 952 469 5000 fax 952 469 5729Louisville, KYphone 502 937 1322 fax 502 937 4180Portland, ORphone 503 283 1020 fax 503 283 2201Toledo, OHphone 419 878 7000 fax 419 878 7001 fax 419 878 7420 (FCG Kit Operations)For information, call toll free... 1-800-C -PARKER (1-800-272-7537)When you need stainless, Parker meansbusiness.Anytime you need stainless steel tube fittings, adapters and components, it pays to think “Parker” first. Here’s why:•Standard stainless designs are availableand will ship in 24 to 48 hours.•We offer a complete selection of stainless steel SAE/NPT and metric fittings and adapters. We are your global source!•No other tube fittings manufacturer rivals Parker’s U.S. manufacturing capabilities.•We are the industry’s leading source for custom-manufactured designs in all materials especially stainless.•For stainless steel fittings featuring exclusive innovations like the Trap-Seal TM O-ring, Robust Port Stud TM design and more, Parker is your only source.•Parker is also your complete source for flaring, bending, flanging and other tube fabricating equipment for achieving fast, leak-free connections.•Our vast worldwide distributor network, ParkerStores, and immediate 24/7 toll-free or web site assistance are incomparable advantages for you.So don’t think twice when you need stainless. Call your Parker distributor, or 1-800-CPARKER, and you’ll see why we’re your best choice inthe business.Seal-Lok TMO-Ring Face Seal Tube FittingsSizes ............................. 1/4" through 2"Pressures ..................... Up to 9200 psiFerulok®Flareless Bite Type FittingsSizes ............................. 1/8" through 2"Pressures ..................... Up to 6000 psiParflange® F37 SystemNon-Welded Tube and PipeSAE Flange SystemSizes ...................... Tube O.D. up to 5.5"Pressures .............. Up to 6000 psiTriple-Lok® and Triple-Lok®237º Flare Tube Fittings and AdaptersTriple-Lok Sizes ........... 1/8" through 2"Triple-Lok 2 Sizes ........ 1/4" through 2"Pressures ..................... Up to 9000 psiEO and EO-2Metric Bite Type FittingsSizes ............... 4 mm through 42 mmPressures ....... Up to 630 bar/9200 psiPipe Fittings and Pipe SwivelsSizes ............................. 1/8" through 2"Pressures ..................... Up to 5000 psi。

alfa laval 605分油机说明书1

PA605Spare Parts CatalogueSpeciﬁcation No.576844-01/2Book No.57721402Rev.5Spare parts catalogue Catalogo parti di ricambioReservdelskatalog Catalogo de pecas sobressalentesErsatzteilkatalog VaraosaluetteloCatalogue de piéces deΚαταλογοσανταλλακτικωνrechangeCatalogue de piezas deReserveonderdelen-catalogusrecambioКаталогзапасныхReservedelskatalogчастеиPublished By:Alfa Laval Tumba ABSE-14780Tumba,SwedenTelephone:+46853065000Telefax:+46853031040©Alfa Laval Tumba AB2008-11-24This publication or any part there of may not be reproduced or transmitted by any process or means without prior written permission ofAlfa Laval Tumba AB.Contents1Read thisﬁrst51.1General information61.2Translation list92Valve block123Oil ancillary kit143.1Temperature sensor163.23-way valve complete183.3Pressure transmitter complete223.4Regulating valve244Sludge outlet285Sludge removal kit306Butterﬂy valve kit327Starter348ESD-relay kit369Spare parts,operating liquid pipe3810Spare parts,oil ancillary4011Spare parts,control unit4212Spare parts,butterﬂy valve4413Slugde pump T70spare par4614Cross reference list48341Read thisﬁrst 1Read thisﬁrstCheck the machine unit number on the name-plate before using this catalogueKontrollera maskinenhetens nummer påmaskinskylten innan du använder katalogenDas Typenschild-ein Hinweis zur korrekten ErsatzteilnummerLa plaque de la machine,un guide pour trouver le numéro de piéce de rechange correctLa placa-marca de la máquina-guía del número correcto del repuestoФирменнаятабличкамашины—указательправилногономеразапаснойчастиLa targhetta della macchina-guida al corretto numero dei ricambiLa placa do fabricante da máquina-um guia do número correto das partes sobressalentesKonekilpi-opastin oikeaan varaosanumeroonΗπινακίδατηςμηχανήςείναιοοδηγόςτουσωστούανταλλακτικούHet gegevensplaatje-een wegwijzer naar het juiste onderdeelnummerTypeskiltet-en guide til det rette reservedelsnummer5PA6051.1General informationSafeguard your commitment to quality by always using genuine Alfa Laval spare parts.Remember,Alfa Laval cannot accept responsibility for the failure of a separator equipped with non-original spare parts. We guarantee the quality and reliability of our products.Följ ditt kvalitetstänkande genom att endast använda Alfa Laval originalreservdelar.Kom ihåg att Alfa Laval inte tar något ansvar för fel påen separator,som innehåller icke-originaldelar.Vi garanterar kvaliteten och driftsäkerheten endast hos våra egna produkter.Aus Rücksicht auf Ihr Bestreben um beste Qualität sollten Sie nur Alfa Laval Originalersatzteile benutzen.Vergessen Sie nicht,Alfa Laval kann keine Verantwortung für das Versagen eines Separatorsübernehmen,der nicht mit Originalersatzteilen versehen ist.Wir garantieren Qualität und Zuverlässigkeit unserer Produkte.Préservez la qualitéde voséquipments en n‘employant que des pièces de rechange Alfa Laval.N’oubliez pas q’Alfa Laval décline toute responsabilitéen cas de panne d’un séparateur nonéquipéde pièces de rechange d’origine.Nous garantissons la qualitéet laﬁabilitéde nos produits.Mantenga su compromiso con la calidad,al usar siempre piezas de repuesto Alfa Laval auténticas.Recuerde que Alfa Laval no acepta responsabilidad por el fallo de una separadora equipada con piezas de repuesto no originales.Garantizamos la calidad yﬁabilidad de nuestros productos.61.1General information1Read thisﬁrstГарантируйтенадежностькачествавсегдаиспользуяподлинныезапасныечастифирмыAlfa Laval.Запомните,чтоAlfa Lavalненесетответственностизаповреждениесепаратора,оснащенногонеподлиннымизапчастами.Мыгарантируемкачестьоинадежностьнашихизделий.Salvaguardate la vostra garanzia di qualitàfacendo sempre usodi parti di ricambio Alfa Laval autentiche.Tenete presente che la Alfa Laval non puòaccettareresponsabilitàper avaria ad un separatore attrezzato con partidi ricambio non originali.Noi garantiamo la qualitàl’afﬁdabilitàdei nostri prodotti.Proteja o seu cometimento a qualidade usando sempre peçassobressalentes genuinas Alfa Laval.Não esqueça que Alfa Laval não aceita responsabilidade porfalha de uma separadora equipada com peças sobressalentesnão genuinas.Nós garantimos a qualidade e a conﬁança dosnossos produtos.Varmistakaa vastuunne laadusta käyttämälläaina alkuperäisiäAlfa Laval varaosia.Muistakaa,Alfa Laval ei voi hyväksyävastuuta ei-alkuperäsillävaraosilla varustetun separaattorin vaurioista.Me takaammetuotteidemme laadun ja käyttövarmuuden.ΕξασφαλίοτευψηλήποιότηταχρησιμοποιώνταςμόνογνήσιαανταλλακτικάτηςAlfa Laval.ΈχετευπόψηνότιηAlfa Lavalδεναναλαμβάνεικαμμιάευθύνηγιαβλάβεςβουτυρομηχανής,οτηνοποίαέχουνεφαρμοστείμήγνήσιαανταλλακτικά.Εγγυόμαστεποιότητακαικαλήλειτουργίαμόνογιαταδικάμαςπροϊόντα.7PA605Streef naar een zo hoog mogelijke kwaliteit en gebruik uitsluitend originele Alfa Laval reserveonderdelen.Streef naar een zo hoog mogelijke kwaliteit en gebruik uitsluitend originele Alfa Laval reserveonderdelen.Vergeet niet dat Alfa Laval niet verantwoordelijk is voor een defecte separator die niet-originele onderdelen bevat.Wij garanderen de kwaliteit en betrouwbaarheid van onze eigen produkten.Hold Dem til den kvalitet,De har valgt at satse på,ved altid at anvendeægte Alfa Laval reservedele.Husk,at Alfa Laval ikke kan påtage sig noget ansvar for fejlpåen separator,som indeholder uoriginale dele.Vi kan kun garantere kvalitet og driftsikkerhed påvore egne produkter.81.2Translation list1Read thisﬁrst 1.2Translation listÖversättningslistaÜbersetzungslisteListe de traductionLista de traducciones9PA605СловарьперевдаLista traduzioni Lista para tradução Käännösluttelo101.2Translation list1Read thisﬁrstΓΛΩΣΣΑΡΙVertaallijstOversættelselistePA6052Valve blockMachine unit number orSubassembly description570807-Ref Part No Description-01NotesQuantity 1176592702Valve block,water12176603708Flow valve13176603705Flow valve14176603704Flow valve1555122813Connecting for solenoid valve365355065301Flexible hose-water175355065401Flexible connection1853********Flexible connection12Valve block2123JPA6053Oil ancillary kitMachine unit number orSubassembly description574090-Ref Part No Description-84-85-86-87NotesQuantityGO/MDO,IF30-IF180,DIN↓GO/MDO,IF30-IF180,JIS↓HFO/LO,DIN↓HFO/LO,JIS↓1176443980Temperature sensor1111See page16 2573699803-way valve complete11See page18 2573699813-way valve complete11See page18 3176092601Nipple11357369080Connectionﬂange JIS11457369580Flexible hose1111554622935Rectangular ring2222657484980Pressure transmitter complete1111See page22 757679201Nipple11757679203Nipple11857369580Flexible hose1111954622935Rectangular ring22221057484980Pressure transmitter complete1111See page22 11176092601Nipple1112176257080Regulating valve11DN25See page24 12176257084Regulating valve11DN25,JISSee page24 1357679202Nipple11111454622914Rectangular ring22223Oil ancillary kit12311531161012974813;142106BPA6053.1Temperature sensorMachine unit number orSubassembly description1764439-Ref Part No Description-80NotesQuantity 01176439101Temperature sensor1021********Spring pocket13.1Temperature sensor 3Oil ancillary kit2107APA6053.23-way valve completeMachine unit number orSubassembly description573699-Ref Part No Description-80-81NotesQuantityDIN↓JIS↓2574409803-way solenoid valve11See page20 3176349103Nipple114176183405Washer22Cu Washer3.23-way valve complete 3Oil ancillary kit2342182BPA6053.2.13-way solenoid valveMachine unit number orSubassembly description574409-Ref Part No Description-80-81NotesQuantity 1574409013-way electric valve11574409043-way solenoid valve1257440902Coil1257440905Coil1356971201Rectangular connector1356971203Rectangular connector1457441301Silencer,Air M5113.23-way valve complete 3Oil ancillary kit32200VPA6053.3Pressure transmitter completeMachine unit number orSubassembly description574849-Ref Part No Description-80NotesQuantity 157484002Pressure transmitter with contact12176390303Needle valve135355171602Washer24176508209Nipple15176183406Washer13.3Pressure transmitter complete 3Oil ancillary kit2123FPA6053.4Regulating valveMachine unit number orSubassembly description1762570-Ref Part No Description-80-84NotesQuantityDIN↓JIS↓021********Insert11DN25See page26 Z176199580Regulating valve spare parts3.4Regulating valve 3Oil ancillary kit2221APA6053.4.1InsertMachine unit number orSubassembly description1761731-Ref Part No Description-80NotesQuantity 1176188080Spindle12176189501Gasket13.1176189401Stufﬁng box nut13.2176148213O-ring13.3176188701Gasket33.4176188801Sleeve13.5176199601Washer13.6176189001Spring14176188501Dome-shaped part15176188601Lock nut16176189180Locking device175350018501Wheel1853********Washer195350023901Nut13.4Regulating valve 3Oil ancillary kit98763.23.13.33.43.63.545212103BPA6054Sludge outletMachine unit number orSubassembly description53550763-Ref Part No Description-01-02NotesQuantityDIN↓JIS↓153********Inspection pipe DIN1153********Inspection pipe JIS12176593402Flexible connection224176201701Hose115176202003Hose clip2212176609601Plug114Sludge outlet2123LPA6055Sludge removal kitMachine unit number orSubassembly description568473-Ref Part No Description-84-85NotesQuantityDIN↓JIS↓156816180Sludge tank112176669901Sludge pump T70113176670401Level switch115176201701Hose1165355074601Flexible hose11757435102Flexible hose L=52011853********Flexible hose119176678980Cover1110176678801Gasket1111176378002Nipple1112176689301Plug11131********Nipple1114176596280Flange114176596281Flange1151********Inlet pipe111622310147Washer441722103507Screw441852635201Bushing1123176600201Non-return valve1124574409813-way solenoid valve11See page20 27176597401Elbow pipe1128176391103Flexible connection1129176608101Regulating valve1131176202003Hose clip2232176148206O-ring1134176621802Elbow113557438601Extention Pipe1136176183411Cu washer115Sludge removal kit2124HPA6056Butterﬂy valve kitMachine unit number orSubassembly description568399-Ref Part No Description-01NotesQuantity1176600701Butterﬂy valve1256830403Sludge valve interlock1Mounted in Control unit6Butter ﬂy valve kit2108APA6057StarterMachine unit number orSubassembly description571306-Ref Part No Description-80NotesQuantity6057130601Basic kit for starter16157130610Sep.Starter,2.5-4A1Only one alternative as per order.6157130611Sep.Starter,4-6.3A16157130612Sep.Starter,6.3-10A16157130613Sep.Starter,10-16A16257130620Pump starter,0.4-0.63A1d6257130621Pump starter,0.63-1A16257130622Pump starter,1-1.6A16257130623Pump starter,1.6-2.5A16257130624Pump starter,2.5-4A16257130625Pump starter,4-6.3A16257130626Pump starter,6.3-10A17Starter2124EPA6058ESD-relay kitMounted in starterMachine unit number orSubassembly description571306-Ref Part No Description-53NotesQuantity112K5350002809Relay1112.1K5350002808Relay socket18ESD-relay kit2123KPA6059Spare parts,operating liquid pipeNot included elewhereMachine unit number orSubassembly description1765993-Ref Part No Description-83NotesQuantity 1176599301Retaining clip12176599302Spring13176599303Core14176599304Spring washer15176599305O-ring16176599306Piston17176599307Disc18176599308Non-return valve19176599309O-ring110176599310O-ring111176599311Coil,24V112176600407Washer adhesive tape1131********Indicator114176599313Drain valve1151********Strainer19Spare parts,operating liquid pipe2094DPA60510Spare parts,oil ancillaryMachine unit number orSubassembly description1764734-Ref Part No Description-82NotesQuantity 01176473404Diaphragm0021********Stufﬁng box kit00317*******Stem/disc kit010Spare parts,oil ancillary1823CPA60511Spare parts,control unitMachine unit number orSubassembly description568452-Ref Part No Description-02NotesQuantity 131********EPC50OP Front Module123183068651EPC50I/O Board P-prog133183063461Cable143183062411EPC50Transformer195350046201Push button1105350020103Switch1115350020110Sealing1125350020111LED bulb,white,24VAC1155350020130Selector switch1165350020131Legend plate1185350045102Pilot lamp1213183063731Fuse kit1223183063721EPC50Board Mounting Kit1235350046203Protection111Spare parts,control unit2124FPA60512Spare parts,butterﬂy valveMachine unit number orSubassembly description1766161-Ref Part No Description-80NotesQuantity 1176616101Seat12176616105Limit switch112Spare parts,butter ﬂy valve2123DPA60513Slugde pump T70spare parMachine unit number orSubassembly description1766702-Ref Part No Description-80NotesQuantity 1176670201O-ring/packing kit42176670202Diaphragm23176670203O-ring64176670204Air valve complete15176670205Mufﬂer113Slugde pump T70spare par2123N14Cross reference list 14Cross reference listPart No.Page Ref.176092601143 1760926011411 1761482063032 176******** 3.2 1761731802402 1761814801602 176183405184 176183406225 1761834113036 176188080261 176188501264 176188601265 176******** 3.3 176******** 3.4 176******** 3.6 176189180266 176******** 3.1 176189501262 176********Z 176******** 3.5 176201701284 176201701305 176202003285 1762020033031 1762570801412 1762570841412 176349103183 1763780023011 1763780033013 176390303222 1763911033028 1764391011601 176443980141 1764734044001 1764734054002 1764734064003 176508209224 176592702121 176593402282 1765962803014 1765962813014 1765974013027 176599301381 176599302382 176599303383 176599304384 176599305385 176599306386 176599307387 176599308388Part No.Page Ref.176599309389176599310381017659931138111765993133814176599316381517660020130231766004073812176600408381317660070132117660370412417660370512317660370812217660810130291766096012812176616101441176616105442176621802303417666990130217667020146117667020246217667020346317667020446417667020546517667040130317667150230151766788013010176678980309176689301301222103507301722310147301631830624114243183062451421318306346142331830637214222318306373142213183068651422526352013018535000280836112.1K535000280936112K535001850126753500201034210535002011042115350020111421253500201304215535002013142165350023901269535004320126853500451024218535004620142953500462034223Part No.Page Ref.535506530112653550654011275355065501128535507460130653550747013085355085380281535508538128153551716022235462291414145462293514554622935149551228131255681618030156830403322569712012035697120320357130601346057130610346157130611346157130612346157130613346157130620346257130621346257130622346257130623346257130624346257130625346257130626346257369080143573695801445736958014857369980142573699811425743510230757438601303557440901201574409022025744090420157440905202574409801825744098130245744130120457484002221574849801465748498014105767920114757679202141357679203147。

2009年Kemper产品目录：焊接、切割等说明书

welding, cutting and more...High-vacuum extraction . KEMPER Dusty (27). Mini-Weldmaster (28). High-vacuum cartridge filter (29)· Accessories ............................... 30 - 31· High-vacuum extractionand filter unit (32)26Ultra light, flexible and powerful.These are only some properties of this small power pack.Two strong turbines provide an excellent extraction efficiencyand high static pressing. The minimum weight makes it veryflexible and universal for many different applications.A Kem Tex® ePTFE membrane filter cartridge provides thefiltration of superfine dust below 0.1 μm. Thereby this unitis suitable for the separation of alveole exchangeable dusts.The advantage of surface filtration is that the filtercartridge can be cleaned.In case of the Dusty, this happens manually in that minutewhen an essential cleaning will be indicated by theinstrument itself. The collected dust can be removed easilyfrom the lower part of the unit.Different nozzles, welding torches with integrated extraction ormini exhaust arms of the extensive accessory programme canbe connected to the two lugs of this extraction and filter unit.The extraction performance can be controlled steplessly andelectronically.For further accessories see pages 30/31. KEMPER DustyPart No.Description63 100KEMPER Dusty1.6 kW · 1 x 230 V / 50 HzVoltage: 1 x 230 V / 50 HzExtraction performance:340 m³/hMotor power: 1.6 kWNoise level:74 dB (A)Filter efficiency:> 99.9 %Weight:21 kgDimensions (w x d x h):300 x 300 x 690 mmTechnical dataPart No.Description10 902 44Spare filter for KEMPER DustySpare filter69mm300m m300mm₤1,197.00₤309.7027Mini-WeldmasterThis easy to transport high vacuum extraction and filterunit is ideal for the extraction of welding fumes at frequently changing work places.Extraction hoses with a diameter of 45 mm guarantee application at locations difficult to access.Various extraction nozzles with a magnetic foot are available.It is also possible to connect one or two welding torches with integrated extraction.The Mini-Weldmaster is equipped with a two stage filter and has a filter efficiency of 99.9 %. It is also possible to retrofit the unit with an activated charcoal filter. Cleaning of the filter inserts is not necessary.Depending on the actual operating time and the substances to be captured the filter has to be changed once or twice a year.A filter monitor indicates a necessary filter change.For more convenient handling a trolley with castor wheels and an automatic start-stop is available.For further accessories see pages 30/31.Part No.Description10 900 34Pre-filter mats, (10 per set)10 900 09Main filter10 900 08Activated charcoal filterSpare filtersVoltage:1 x 230 V / 50 Hz 3 x 400 V / 50 Hz Extraction performance:340 m³/h 270 m³/h Motor power: 1.6 kW 1.1 kW Noise level:71 dB (A)71 dB (A)Filter efficiency:> 99,9 % according to BGIA classification M Weight:24 kg 28 kgDimensions (w x d x h):340 x 450 x 660 mm 340 x 450 x 660 mmTechnical dataPart No.Description 91 730Mini-Weldmaster1.6 kW · 1 x 230 V / 50 Hz 91 730 100Mini-Weldmaster1.1 kW · 3 x 400 V / 50 Hz91 731Mini-Weldmaster with activated charcoal 1.6 kW · 1 x 230 V / 50 Hz91 731 100Mini-Weldmaster with activated charcoal 1.1 kW · 3 x 400 V / 50 HzUnits₤37.30116.40233.60₤1,330.002,659.001,563.002,893.0028With its four air intakes this mobile extraction and filter unit offers a flexible unit for the extraction of polluted air directly at source.It can be used on multiple operations in the metal working industry.The unit can be connected to exhaust nozzles, mini exhaust arms or shields with integrated extraction. The use of torches with integrated extraction makes it even more flexible.The robust extraction unit is supplied with two Kem Tex ® ePTFE membrane filter cartridges, which are monitored by the electrical control and – according to the saturation rate –cleaned automatically during operation.The extraction capacity can be controlled by a stepless adjustable speed control.For further accessories see pages 30/31.High-vacuum cartridge filter unit, mobilePart No.Description82 600High-vacuum cartridge filter unit, mobile 3.3 kW · 3 x 400 V / 50 Hz 94 102 600 02Sensor clamp for the automatic start-stopFan performance:max. 600 m³/h Motor power: 3.3 kW Amperage:7 APressure:20,000 PaVoltage:3 x 400 V / 50 Hz Filter efficiency:> 99,9 %(BGIA classification M)for info on filter cartridges see page 33Compressed air supply: 3.0 - 5.0 bar Weight:178 kg Dimensions (w x d x h):655 x 825 x 1,315 mm Noise level:70 dB (A)Technical dataPart No.Description 10 902 44Spare filter forhigh-vacuum cartridge filter unit, mobileSpare filter₤6,683.00495.60₤309.7029AccessoriesTrolleyPart No.Description91 750 200Trolley for Mini-Weldmaster incl. 4 guide rollers, with brakesExtraction hosePart No.Description93 070 004Extraction hose Ø 45 mm, length: 2.5 m 93 070 005Extraction hose Ø 45 mm, length: 5.0 m 93 070 006Extraction hose Ø 45 mm, length: 10.0 mSlit nozzle 300 mmPart No.Description23 200 08Slit nozzle, 300 mm, with magnetic footSlit nozzle 600 mmPart No.Description23 200 09Slit nozzle, 600 mm, with magnetic footFunnel nozzlePart No.Description23 200 10Funnel nozzle flexible, with magnetic footWelding shieldPart No.Description280 010 030Welding shield with integrated extraction₤49.9098.70191.10₤119.50₤128.80₤126.80₤101.80₤89.8030AccessoriesAdaptor for welding torchesFor connection with a hose, Ø 45 mm.Part No.Description10 600 71Adaptor for welding torches with integrated extraction 42 - 44 mm 10 601 04Adaptor for welding torches with integrated extraction 39 - 42 mm 10 600 84Adaptor for welding torches with integrated extraction 30 - 38 mmMini-Exhaust armPart No.Description91 350Exhaust arm, Ø 50 mm, length: 740 mm, without exhaust nozzle, swivelling to all directions, tubes made of aluminium,joints made of molded plastic incl. standard fixing device.Other exhaust arm diameters on request.Mounting bracketsPart No.Description93 008 001Table mounting bracket incl. two screw clamps 93 008 002Wall mounting bracket incl. screws and rawlplugsNozzlesPart No.Description232 0002Slit nozzle, width 200 mm 232 0004Tube nozzle, Ø 50 mm232 0005Plexiglass nozzle, 245 x 220 mm232 0006Funnel nozzle, round, extraction hole Ø 210 mm₤7.307.307.30₤220.20₤44.5032.50₤54.9019.1068.4064.2031High-vacuum extraction and filter unitPart No.:91 0100 20091 0200 20091 0300 200Filter cartridges:Kem Tex ®ePTFE-membrane filter for surface filtration Filter efficiency:> 99.99 % according to BGIA classification L, M Filter efficiency:For alveole exchangeable dusts see page 33Extraction performance:3,300 m³/h 4,000 m³/h 4,500 m³/h Pressure:18,000 Pa 18,000 Pa 20,000 Pa Motor power:22.0 kW 30.0 kW 37.0 kW Voltage:3 x 400 V / 50 Hz 3 x 400 V / 50 Hz 3 x 400 V / 50 Hz Compressed air supply: 5.0 to 6.0 bar 5.0 to 6.0 bar 5.0 to 6.0 bar Weight:1,050 kg 1,150 kg 1,350 kg Dimensions (w x d x h):2,375 x 1,413 x 2,015 mm 2,826 x 1,413 x 2,015 mm 3,277 x 1,413 x 2,015 mmTechnical dataHigh-vacuum extraction and filter units of the system 9000are very suitable for the connection of several extraction elements and for the construction of central extraction systems for welding workshops, grinding shops or the like.The extracted harmful substances will be separated at the surface of the Kem Tex ® ePTFE membrane filter. The control,based on a Siemens Simatec S7, monitors the collected dust on the surface of the cartridges. On reaching a certain limit it automatically activates the cleaning process during operation of the unit.The robust filter unit, contructed of reinforced steel panels,consists of two parts being connected on site.The following table gives an overview of the standard units.Units with higher outputs are available.For further information on extraction and filtration unitssystem 9000 see pages 70 to 82.32Due to the Kem Tex ® ePTFE membrane filter the KEMPER extraction and filtration systems act as reference for all extraction units.KEMPER extraction and filtration systems are yet efficient where other filtration units are no longer able to filter even the smallest particles. Especially the range of particle sizes smaller than 0.4 μm is very important for the filtration of dusts generated during welding and cutting processes. Because the particles below 0.4 μm are alveole exchangeable.Pulmonary alveoli are the smallest units in the human lung where oxygen is exchanged between the inhaled air and the human blood. Particles reaching the pulmonary alveoli can also diffuse into the bloodstream, form deposits all over the body and, depending on the chemical structure of the particles, can cause cancer.It is absolutely essential for extraction and filtration systems to filter even those finest particles since it is the only possibility to protect your employees and yourself against serious diseases.The BGIA (German government safety organisation) tests on the particle size distribution of welding smoke has shown the following results (E308-16).The Kem Tex ® ePTFE membrane filters can filter particles smaller than 0.4 μm, which represent 98.9 % of the total dust particles, according to BGIA tests.The effective pore size of the Kem Tex ® ePTFE membrane filter is that small, that even particles with 0.1 μm already will be filtered up to 92 %. The equal zero-emission of the Kem Tex ®ePTFE membrane surpasses all current regulations even for superfine particles. Especially with superfine dusts theKem Tex ® ePTFE membrane filters prevent a penetration of the particles.Kem Tex ® ePTFE membrane filters are therefore the ultimate technology concerning all applications. They are yet efficient where conventional filters of the filter class “M” reach their limit. About 90 % less particles reach the air in comparison with conventional filters.Trust in the experience of KEMPER and keep your air clean with Kem Tex ® ePTFE membrane filters!KemTex ® ePTFE membrane filterParticles Ø in μm <0.2<0.4<0.6<0.8<1.0>1.0Quantity 8002519012% of the quantity 75.323.60.900.10.2% of the mass15.938.77.58.229.733Your distributor:P a r t N o . 691 2440-3 · P r i n t e d o n e c o l o g i c a l l y b e n e ﬁ c i a l p a p e r .All prices are exclusive of the current VAT.Priced catalogue items will be delivered carriage paid, within the EU (mainland),incl. packaging. For orders below a net price of £400.00, a standard carriage charge of £15.00ex. VAT, for packaging, insurance and carriage will be raised.All orders are subject to our conditions of sale.Price and technical speciﬁ cations are subject to change without notice. We do not accept any liability for misprints. With the publication of this price list, all former price list loose there validity.The technical speciﬁ cations stated in our catalogue are subject to change withoutnotice. This catalogue is protected by copyright and remains our property.This catalogue can be reclaimed at anytime.Reprints, or partial reprints can only beaccepted with written authorisation by KEMPER .KEMPER (U.K.) Ltd. · Venture Court · 2 Debdale Road · Wellingborough · Northamptonshire NN85AA·Tel.01327872909·Fax01327872181·**************.uk·。

SFA Companies 压力试验机指令手册说明书

IAP5506-M0_022013Max. Operating Pressure 10,000 PSIShop Presses Instruction ManualMODELS: IAP5506, IEP5506, IMP5506, IAP5513, IEP5513, IEPD5513,IEP10010, IAP10010, IEPD10010 & IEPDS10010SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419 * Fax: 816-891-6599E-mail:******************************:Models IEP10010, IAP10010, IEPD10010 &IEPDS10010Models IAP5506, IEP5506, IMP5506,IAP5513, IEP5513 & IEPD5513This is the safety alert symbol. It is used to alert you to potential personal injury hazards.Obey all safety messages that follow this symbol to avoid possible injury or death.SAFETY AND GENERAL INFORMATIONSave these instructions. For your safety, read and understand the information contained within. The owner and operator shall have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and safety information shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If any component of this product has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), discontinue use until checked out by a BVA Hydraulics Authorized Service Center. Owners and operators of this equipment shall be aware that the use and subsequent repair of this equipment may require special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement parts only. Any component of this Equipment that appears to be damaged in any way, is worn or operates abnormally shall be removed from service immediately until such time as it can be repaired/replaced. Labels and Instruction Manuals are available from manufacturer.PRODUCT DESCRIPTIONBVA Hydraulics Shop presses are designed for automotive, truck, implement, fleet, and industrial repair shops where pressing, bending, straightening, forming, holding is required. Each press includes a cylinder, an electric pump with pendant switch, a winch assembly which provides safe and fast way to raise and lower the bed frame, and a pressure gauge which provides for monitoring the applied press force.Typical applications include installation and removal of alternator and power steering pump bearings, axle bearings, transmission bearings, seal, driveshaft bearings and u-joints and others. It is not intended for use as an assembly table or as fixture stand used to secure a large, final assembly component. Please refer to Cylinder and Pump manuals for more information.WARNING: To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure ofeach pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump.NOTICE: The power retract feature of the IEPD5513, IEPD10010 & IEPDS10010 Shop Presses is not intended to be used under load. Never pull or raise a workpiece with the power retract feature.BEFORE USE1. Inspect before each use. Do not use if bent, broken or cracked components are noted. Check for and tighten any loose as-semblies.2. Verify that the product and the application are compatible, if in doubt call BVA Technical Service.3. Before using this product, read the operator’s manual completely and familiarize yourself thoroughly with the product, its com-ponents and recognize the potential hazards associated with its use.SPECIFICATIONSPress Model Rated Capac-ityCylinder ModelPump Model/Type Press Bed DepthPress Bed WidthPress Size (H” x W” x L”)Min. Work Height (in.)Max. Work Height (in.)IMP550655 TonH5506P2001/manual 14-7/8”35-1/2”79-1/8 x 56 x 301455-1/2IAP5506PA2000/air-hydraulic IEP5506PEW0501T/electric IAP5513H5513PA3801/air-hydraulic IEP5513PEW0501T/electric IEPD5513HD5513PEWM0501T/electricIAP10010100 TonH10010PA755016-1/4”35-3/8”89-1/2 x 63 x 3011-1/452IEP10010PEW1002T/electric IEPD10010HD10010PEWM1002T/electric IEPDS10010PESML1002T/electricCylinderCylinder Model Rated Capacity (ton)Stroke(in.)EffectiveArea(in 3)Oil Vol-ume (in 3) Min Height (in.)Max Height (in.)Outer Dia.(in.)Ram Dia. (in.)Saddle Dia.(in.)Collar Thread (in.)Collar Thread Length (in.)H550655 6.2210.9968.3411.1417.365 3.15 2.765”-122.17H551313.27145.7718.1531.42HD551313.19144.9420.0433.23 3.74 1.73H1001010010.2420.57210.617.6827.93 6.97 4.136-7/8”-12HD1001010.13208.327.803.742.95 2.00Manual Pump (Hand pump)Hand Pump Model Usable Oil Volume (in 3)Pressure Rating(psi)Oil Displacement(in 3)Oil Outlet Port Thread Weight (lbs)1st Stage 2nd Stage 1st Stage 2nd Stage P200112220010,0000.810.143/8”-18 NPTF24Air PumpAir Pump Model Usable Oil Volume(in 3)Pressure Rating(psi)Oil Output Flow Rate (in 3/min)Input Air Pressure Range(psi)Weight(lbs)No LoadLoadPA150091.510,000651190-17518PA380123227PA7550460.636Electric PumpElectric Pump Model ReservoirCapacity(gal)Pressure Rating (psi)Oil Output Flow Rate (in 3/min)ValveType Motor Size (hp)Current Draw (A)MotorVoltage (V)Weight (lbs)1st Stage 2nd Stage 1st Stage 2nd StagePEW0501T135010,000293183-way, 3-pos 0.59115/12560PEWM0501T4-way, 3-posFigure 2 - Components for 100 Ton Press (Model IEP10010)Hand/ Manual Pump for Model IMP5506Air Pump for Model IAP5506Air Pump for Model IAP5513CylinderWinchUpright ChannelSupport PinBase ChannelUpper Cross MemberElectric Pump for Model IEP5506, IEP5513 &IEPD5513Pressure Gauge Control Valve KnobBed FrameArbor Plates(purchased separately)Lower Cross MemberPendant SwitchElectric Pump (con’t)PEW1002T 270010,000397373-way, 3-pos 112115/12571PEWM1002T 4-way, 3-posPESML1002T31173Air Pump for ModelIAP10010ASSEMBLY1. Ensure bed frame at lowest position and winch cable is slack.2. Install the winch assembly to the press using 3 bolts, washers and nuts (ref. Figs 2 & 3).3. Secure cylinder to cylinder adapter plate, and mount the adapter plate to upper cross member using 4 bolts and washers.NOTICE: The cylinder comes with carrying handles, simply loosen the Allen head socket screw to remove the handles.4. Attach base sections to upright channels with 4 bolts and nuts.5. Attach lower cross member to upright channels with 4 bolts and nuts.6. For 55 Ton Models only : adjust the pump bracket to desired height and secure with bolts, nuts & washers provided.7. Connect pressure gauge and hydraulic hose to the gauge adapter, then connect the gauge adapter to pump.8. For Models IEPD5513, IEPD10010 & IEPDS10010 only: Attach second hose to Port B on Control Valve. Attach second coupler to free hose end. Connect coupler to bottom port on Cylinder.NOTICE: Ensure thread tape or compound is used on connections.8. Place the pump on the pump bracket and connect the other end of hydraulic hose to cylinder.CAUTION: Before disassembling, slide bed frame section down to its lowest position.OPERATIONWARNING: Shop presses can present a projectile hazard. Ensure workpiece is center loaded and secure. Reducerisk of flying debris by following all operating instructions. Know your press and hazards associated with its use.Keep hands and feet from bed area at all times.WARNING: Risk of serious eye injury from projected or blown debris. Reduce risk by wearing safety goggles when working with or around press.1. Insert the support pins to desired height, then lower the bed frame using the winch until the cable is slack and the bed frame is resting fully on the support pins.2. Place arbor plates on the bed frame (optional).3. Place workpiece on bed frame, using every precaution necessary to ensure your safety and prevent property damage.4. Operate the pump:a) For Model IMP5506 (manual): Close the release valve by turning it clockwise, and pump the handle to extend the cylinder ram. To retract, simply open the release valve of pump.b) For Models IAP5506, IAP5513 & IAP10010 (air): Connect to suitable air supply, press on the foot pedal to extend the cylinder ram. To retract, simply press the release valve by stepping on the raised, stirrup shaped portion of the foot pedal.c) For Models IEP5506, IEP55513, IEPD5513, IEP10010, IEPD10010 & IEPDS10010 (electric): Toggle the ON/OFF switch to start the electric pump and let the pump idle for a few minutes before putting into operation. Use control valve knob to extend or retract the cylinder ram.WARNING: Burst hazard exists if hose or connection pressure exceeds rated pressure. Always monitor the pressuregauge while in operation and never leave loaded press unattended.NOTICE: The power retract feature of the IEPD5513, IEPD10010 & IEPDS10010 Shop Presses is not intended to be used under load. Never pull or raise a workpiece with the power retract feature.NOTICE: Never operate pump with hose disconnected from cylinder. If operated in this condition, the hydraulic hose and con -nections become pressurized. This increases burst hazard.5. Apply load to workpiece. Do not overload the workpiece.6. Stabilize workpiece in a manner which will not allow it to inadvertently fall from the bed once the load is removed.7. Once cylinder has fully retracted, remove workpiece.NOTICE: To protect your cylinder, do not continue to operate pump after cylinder plunger is fully extended or retracted.TROUBLESHOOTINGA system failure may or may not be the result of a pump malfunction. The following information is intended to be used as an aid in determining if a problem exist.Symptom Possible Causes Corrective ActionErratic Ram Performance • Air in system or pump cavitation• External leak• Internal hydraulic leak• Follow pump instructions for bleeding air• Tighten all connections• Contact Service CenterPump or ram fails to maintain pressure • Overload condition• External leak• Internal hydraulic leak• Ram seals leaking• Pump or valve malfunctioning• Remedy overload condition• Tighten all connections• Contact Service Center• Contact Service Center• Check pump operating instructionsRam extends partially • Hydraulic oil level too low in pump• Load is above the capacity of system• Ram is sticking or binding• Fill and bleed the system• Match the capacity to application• Contact Service CenterSlow ram movement • Loose connection or coupler• Restricted hydraulic line or fitting• Pump not working correctly• Ram seals leaking• Tighten connection or coupler• Clean and replace if damaged• Check pump operating instructions• Replace cylinderRam leaks hydraulic fluid• Worn or damaged seals• Contact Service CenterRam will not retract or retracts slower than normal • Linkage binding• Loose couplers• Malfunctioning coupler• Weak or broken retraction springs• Ram damaged internally• Pump reservoir too full• Lubricate all moving parts• Tighten couplers• Depressurize pump and hose, remove ap-plication, then replace a new coupler• Contact Service Center• Contact Service Center• Drain hydraulic fluid to correct levelMotor will not start (for Model IEP5506, IEP5513, IEPD5513, IEP10010, IEPD10010, & IE-PDS10010)• No power or wrong voltage• Damaged power cord• Tripped circuit breaker• Loose or faulty wiring• Check the power supply & voltage• Contact Customer Service• Make sure breaker is of adequate size• Contact Customer ServiceMotor cuts out (for ModelIEP5506, IEP5513, IEPD5513, IEP10010, IEPD10010 & IEPDS10010)• Extension cord too long• Faulty motor• Overheated motor can trip circuit breaker• Replace with shorter cord• Replace or repair• Allow motor to cool, reset circuit breaker MAINTENANCEPlease refer to cylinder and pump’s manuals for maintenance and how to add/change hydraulic oil. For best results, change the oil once a year. Use only good quality hydraulic oil. Mobil DTE13M or equivalent is recommended for manual and air pumps, BVA hydraulic oil or equivalent for electric pump.LubricationA periodic coating of light lubricating oil to pivot points and hinges will help to prevent rust and assure assemblies move freely. StorageDepressurize the hydraulic system, disconnect the hydraulic hose and lower the bed frame to lowest position. Disconnect both hoses on the IEPD5513, IEPD10010 & IEPDS10010 Double Acting Shop Presses.Figure 3- Replacement Parts Illustration for Models IAP 5506, IEP5506, IMP5506, IAP5513, IEP5513 & IEPD5513Parts IllustrationShop Press Service PartsINCLUDES MODELS: IAP5506, IEP5506, IMP5506, IAP5513, IEP5513 & IEPD5513SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419 * Fax: 816-891-6599E-mail:******************************:Note: Not all components of the press are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.1119201324568722231121161514139101812Parts List Shop Presses Service PartsMODELS: IMP5506, IAP5506, IEP5506, IAP5513, IEP5513 & IEPD5513SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419 * Fax: 816-891-6599E-mail:******************************:Note: Not all components of the press are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.ItemPart No. for ModelDescription Qty IMP5506IAP5506IAP5513IEP5506IEP5513IEPD55131N/A Press Frame w/Winch andPump Brackets12N/A Bed Frame1 3400-002-003Support Pin2 4IEP-001-004Frame Base Channel2 5IEP-001-005Lower Cross Member1 6400-002-006Winch1 7400-002-007Cable Sheaves (Pulley)3 8400-002-008Cable2 9IEP-001-009N/A Hand Pump Platform Bracket1 10N/A IEP-001-011Air/Electric Pump Bracket1 11IEP-002-012Cylinder Adapter Plate112a H5506N/A H5506N/A Single Acting Cylinder, 55 Ton6” Stroke112b N/A H5513N/A H5513N/A Single Acting Cylinder, 55 Ton 13” Stroke112c N/A HD5513Double Acting Cylinder, 55 Ton 13” stroke113P2301N/A Pump, Manual1 14N/A PA1500N/A Pump, Air, 91.5 in31 15N/A PA3801N/A Pump, Air, 232 in31 16N/A PEW0501T PEWM0501T Pump, Electric, 0.5 hp1 17300-002-016N/A Pump Mounting Hardware Kit1 18N/A PEW01Pendant Switch1 19CS3838CS3838C CS3838Hydraulic Hose 1* 20CH38M Male Coupler 1* 21GW4014Pressure Gauge, 4”, Wet1 22CF3814Gauge Adapter1 23AP55Arbor Plates1* Qty 2 for IEPD5513 Double Acting PressesShop Presses Service PartsMODEL NUMBER: IAP10010, IEP10010, IEPD10010 & IEPDS10010SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419 * Fax: 816-891-6599E-mail:******************************:Parts IllustrationNote: Not all components of the press are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.Figure 4- Replacement Parts Illustration for Models IAP10010, IEP10010, IEPD10010 & IEPDS10010101315161711b13245687914121811aParts List Shop Presses Service PartsMODELS: IAP10010, IEP10010, IEPD10010 & IEPDS10010SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419 * Fax: 816-891-6599E-mail:******************************:Note: Not all components of the press are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.ItemPart No. for ModelDescription Qty IAP10010IEP10010IEPD10010IEPDS100101N/A Press Frame w/Winch and Pump Bracket1 2N/A Bed Frame1 3610-002-003Support Pin2 4IEP-002-004Frame Base Channel2 5IEP-002-005Lower Cross Member1 6400-002-006Winch1 7400-002-007Cable Sheaves (Pulley)3 8610-002-008Cable2 9IEP-002-009Cylinder Adapter Plate1 10a H10010N/A Single Acting Cylinder, 100 ton, 10” Stroke1 10b N/A HD10010Double Acting Cylinder, 100 ton, 10” Stroke1 11a PA7550N/A Pump, Air, 460.6 in31 11b N/A PEW1002T PEWM1002T PESML1002T Pump, Electric, 1 hp1 12N/A PEW01N/A Pendant Switch1 13CS3838C CS3838Hydraulic Hose 1* 14CH38M Male Coupler 1* 15GW4014Pressure Gauge, 4”, Wet1 16CF3814Gauge Adapter1 17AP100Arbor Plates1 18IEP-001-011Electric Pump Bracket1* Qty 2 for IEPD10010 & IEPDS10010 Double Acting PressesLIMITED LIFETIME WARRANTYBVA Hydraulics®, represented in the United States by SFA Companies [“SFA”] warrants this product to be free from defects in material and workmanship for the life of the product as long as the original purchaser owns the product. The warranty is non-transferable and is subject to the terms, exclusions, and limitations described below:• Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.• This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs not performed by BVA Hydraulics or one of its authorized personnel), improper fluid use, or use of the product in any manner for which the product was not intended or the use of which is not in accordance with the instructions or warnings provided with the product.• In the unlikely event that a BVA Hydraulics product fails due to material defect in workmanship, you may contact SFA Companies for disposition. In such cases, the customer’s sole and exclusive remedy for any breach or alleged breach of warranty is limited to the repair or replacement of the defective product.• Under no circumstances is BVA Hydraulics liable for any consequential or incidental damage or loss whatsoever.• THIS WARRANTY IS LIMITED TO NEW PRODUCTS SOLD THROUGH AUTHORIZED DISTRIBUTORS AND OTHER CHANNELS DESIGNATED BY BVA HYDRAULICS. NO AGENT, EMPLOYEE OR OTHER REPRESENTATIVE OF BVA HYDRAULICS IS AUTHORIZED TO MODIFY THIS WARRANTY.• THE FOREGOING IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A FITNESS FOR A PARTICULAR PURPOSE.• Components not manufactured by BVA Hydraulics including certain motor systems, gasoline engines, and other are not covered by this warranty and instead are covered by the manufacturer’s separate manufacturer’s warranty provided in the package.• BVA Hydraulics’ liability in all cases is limited to, and will not exceed the purchase price paid for the product.SFA Companies10939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419E-mail:***********************1110939 N. Pomona Ave. Kansas City, MO 64153Tel: 888-332-6419E-mail:***********************12。

LG Multi V P NO：MFL67850001 商品说明书

OWNER’S MANUALAIR CONDITIONERPlease read this manual carefully before operatingyour set and retain it for future reference. TYPE: Multi VP/NO : MFL67850001ENGLISH ESPAÑOL PORTUGUESEIMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product WARNINGIt can result in serious injury or death when the directions are ignoredCAUTIONIt can result in minor injury or product damage when the directions are ignoredWARNING• Installation or repairs made by unqualified persons can result in hazards to you and others.• The information contained in the manual is intended for use by a qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.• Failure to carefully read and follow all instructions in this manual can result in equipment mal-function, property damage, personal injury and/or death.Installation• Have all electric work done by a licensed electrician according to "Electric Facility Engineering Stan-dard" and "Interior Wire Regulations" and the instructions given in this manual and always use a spe-cial circuit.- If the power source capacity is inadequate or electric work is performed improperly, electric shock or fire may result.• Ask the dealer or an authorized technician to install the air conditioner.- Improper installation by the user may result in water leakage, electric shock, or fire.• Always ground the product.- There is risk of fire or electric shock.• Always intstall a dedicated circuit and breaker.- Improper wiring or installation may cause fire or electric shock.• For re-installation of the installed product, always contact a dealer or an Authorized Service Center.- There is risk of fire, electric shock, explosion, or injury.• Do not install, remove, or re-install the unit by yourself (customer).- There is risk of fire, electric shock, explosion, or injury.• Do not store or use flammable gas or combustibles near the air conditioner.- There is risk of fire or failure of product.• Use the correctly rated breaker or fuse.- There is risk of fire or electric shock.• Prepare for strong wind or earthquake and install the unit at the specified place.- Improper installation may cause the unit to topple and result in injury.• Do not install the product on a defective installation stand.- It may cause injury, accident, or damage to the product.!2IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS3• When installing and moving the air conditioner to another site, do not charge it with adifferent refrigerant from the refrigerant specified on the unit.- If a different refrigerant or air is mixed with the original refrigerant, the refrigerant cycle may mal-function and the unit may be damaged.• Do not reconstruct to change the settings of the protection devices.- If the pressure switch, thermal switch, or other protection device is shorted and operated forcibly, or parts other than those specified by LGE are used, fire or explosion may result.• Ventilate before operating air conditioner when gas leaked out.- It may cause explosion, fire, and burn.• Securely install the cover of control box and the panel.- If the cover and panel are not installed securely, dust or water may enter the outdoor unit and fire or electric shock may result.• If the air conditioner is installed in a small room, measures must be taken to prevent the refrigerant concentration from exceeding the safety limit when the refrigerant leaks.- Consult the dealer regarding the appropriate measures to prevent the safety limit from being ex-ceeded. Should the refrigerant leak and cause the safety limit to be exceeded, harzards due to lack of oxygen in the room could result.• Don't use the existing manifold gage for R22 refrigerant.- Use the manifold gage for high pressure (R410A) as possible as for stable refrigerant filling.• Don't mix and use the R22 pipe and the installation appliances that were used until now- Mixing the oil of R22 and R410A may causefailure of the unit due to hydrolysis.Operation• Do not damage or use an unspecified power cord.- There is risk of fire, electric shock, explosion, or injury.• Use a dedicated outlet for this appliance.- There is risk of fire or electrical shock.• Be cautious that water could not enter the product.- There is risk of fire, electric shock, or product damage.• Do not touch the power switch with wet hands.- There is risk of fire, electric shock, explosion, or injury.• Take care so that children should not randomly operate the wire remote control for play.- Frequent conversion to cold or heat mode may cause failure of the unit.• When the product is soaked (flooded or submerged), contact an Authorized Service Center.- There is risk of fire or electric shock.• Be cautious not to touch the sharp edges when installing.- It may cause injury.• Take care to ensure that nobody could step on or fall onto the outdoor unit.- This could result in personal injury and product damage.• Do not open the inlet grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.)- There is risk of physical injury, electric shock, or product failure.CAUTIONInstallation• Always check for gas (refrigerant) leakage after installation or repair of product.- Low refrigerant levels may cause failure of product.• Do not install the product where the noise or hot air from the outdoor unit could damage the neighborhoods.- It may cause a problem for your neighbors.• Keep level even when installing the product.- To avoid vibration or water leakage.• Do not install the unit where combustible gas may leak.- If the gas leaks and accumulates around the unit, an explosion may result.• Use power cables of sufficient current carrying capacity and rating.- Cables that are too small may leak, generate heat, and cause a fire.• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.- There is risk of damage or loss of property.• Keep the unit away from children. The heat exchanger is very sharp.- It can cause the injury, such as cutting the finger. Also the damaged fin may result in degradation of capacity.• When installting the unit in a hospital, communication station, or similar place, provide sufficient protection against noise.- The inverter equipment, private power generator, high-frequency medical equipment, or radio communication equip-ment may cause the air conditioner to operate erroneously, or fail to operate. On the other hand, the air conditioner may affect such equipment by creating noise that disturbs medical treatment or image broadcasting.• Do not install the product where it is exposed to sea wind (salt spray) directly.- It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.Operation• Do not use the air conditioner in special environments.- Oil, steam, sulfuric smoke, etc. can significantly reduce the performance of the air conditioner or damage its parts.• Do not block the inlet or outlet.- It may cause failure of appliance or accident.• Make the connections securely so that the outside force of the cable may not be applied to the terminals.- Inadequate connection and fastening may generate heat and cause a fire.• Be sure the installation area does not deteriorate with age.- If the base collapses, the air conditioner could fall with it, causing property damage, product failure, or per-sonal injury.• Install and insulate the drain hose to ensure that water is drained away properly based on the installation manual.- A bad connection may cause water leakage.• Be very careful about product transportation.- Only one person should not carry the product if it weighs more than 20 kg.- Some products use PP bands for packaging. Do not use any PP bands for a means of transportation. It is dangerous.- Do not touch the heat exchanger fins. Doing so may cut your fingers.- When transporting the outdoor unit, suspending it at the specified positions on the unit base. Also support the outdoor unit at four points so that it cannot slip sideways.• Safely dispose of the packing materials.- Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries.- Tear apart and throw away plastic packaging bags so that children may not play with them. If children play with a plastic bag which was not torn apart, they face the risk of suffocation.!4IMPORTANT SAFETY INSTRUCTIONSIMPORTANT SAFETY INSTRUCTIONS5• Turn on the power at least 6 hours before starting operation.- Starting operation immediately after turning on the main power switch can result in severedamage to internal parts. Keep the power switch turned on during the operational season.• Do not touch any of the refrigerant piping during and after operation.- It can cause a burn or frostbite.• Do not operate the air conditioner with the panels or guards removed.- Rotating, hot, or high-voltage parts can cause injuries.• Do not directly turn off the main power switch after stopping operation.- Wait at least 5 minutes before turning off the main power switch. Otherwise it may result in water leakage or other problems.• Auto-addressing should be done in condition of connecting the power of all indoor and outdoour units. Auto-addressing should also be done in case of changing the indoor unit PCB.• Use a firm stool or ladder when cleaning or maintaining the air conditioner.- Be careful and avoid personal injury.• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is plugged in.- There are sharp and moving parts that could cause personal injury.• Avoid a place where rain may enter since the HR unit is for indoor.- There is risk of property damage, failure of product or electric shock.• Install the HR unit at a place in which it is not affected by operation mode changing noise.- Installation within cell such as meeting room etc, may disturb business due to noise.6LG Electronics México, S.A de c.vSor Juana lnés de la Cruz No. 555 Col. San Lorenzo Industrial Tlalnepantla de Baz, Estado de México C.P. 54033Tel. 5321 1919Teléfono sin costo 01 800 347 1919Página web .mx。

Parker Hannifin Corporation的Veriflo Division的500系列

500 SeriesSingle & DuplexIntegrated ComponentBellows ValveParker Hannifin Corporation's Veriflo Division presents the 500 Series Single Integrated Component Bellows Valves.Integrated Components reduce the number of welds and eliminate dead legs in your UHP gas delivery system. The compact designs allow multiple drops from a single vertical or horizontal main, without restriction to flow in the main.▼materials of constructionW ettedBody . . . . . . . “VeriClean”, Veriflo’s custom high . . . . . . . . . . . . . . purity type 316L Stainless Steel TM Tube Ends . . . . . . . . . . . . . . . . 316L Stainless Steel Stem . . . . . . . . . . . . . . . . . . . . 316L Stainless Steel Seat Holder. . . . . . . . . . . . . . . 316L Stainless Steel Bellows Adapter. . . . . . . . . . . 316L Stainless Steel Bellows . . . . . . . . . . . . . . . . . . . . . . . . . . . Inconel ®Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PCTFE Bonnet Gasket . . . . . . . . . . . . . . . . . . . . . . NickelNon-wettedHandle. . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum Interior Stem. . . . . . . . 300 Series Stainless Steel or . . . . . . . . . . . . . . . . . . . . . . . . . 17-4 Stainless Steel Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bronze Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brass Bonnet. . . . . . . . . . . . . . . Aluminum or 316 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless Steeloperating conditionsMaximum Pressure . . . . . . . 250 psig (17.2 barg)Minimum operating pressure. . . . . . . . . Vacuum Maximum operating temperature:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212°F (100°C)Design Leak Rate:Inboard . . . . . . . . . . . . . . . . . 1 x 10-10scc/sec He Outboard . . . . . . . . . . . . . . . . 1 x 10-5scc/sec He Across the seat . . . . . . . . . . . 1 x 10-10scc/sec Hesurface finishesStandard Ra . . . . . . . . . . . . . . . 10 micro inch Ra . . . . . optional 5 Ra and 20 Ra (electropolished)functional performanceFlow capacity:UHP504. . . . . . . . . . . . . . . . . . . . . . . . . . . . C v = 15UHP506. . . . . . . . . . . . . . . . . . . . . . . . . . . . C v = 20▼▼featuresMulti-Ply Inconel 625 bellows for maximum cycle life in a small envelope.Minimal PCTFE to reduce outgassing and moisture absorption.Heat code traceability on valve bodies, tube stubs and purge ports.Non-Rising handwheel for optimal clearanceOpen/Close Indicators on manual valve.Optimum purge port location.optionsMultiple handle colors available for gas differentiation.Purge Connections in VacuSeal ™, UltraSeal™ or A-LOK ®compression.Multiple Pneumatic Actuators available on most sizes (contact factory).Expanded tube ends offered for low flow applications.▼▼▼▼▼▼▼▼▼▼Catalog:4507LitPN:25000181Revision:A • 10/03500 SeriesNote:Metric tube sizes and wall thickness available upon request.Tube stub expanders and pneumatic actuation available.Larger valve bodies and end connections available.Dimensions in inches.500 SeriesNote:Metric tube sizes and wallthickness available upon request.Tube stub expanders andpneumatic actuation available.Larger valve bodies and endconnections available.Dimensions in inches.500 SeriesSERIES 5=04 = 1/4”1 = Blue2 = Pink3 = Yellow4 = Green5 = RedA = None504M 1046 = Purple 7 = Black 8 = Gold 9 = Clear0 = White SHC SVC DHC DHT DVT SHC04For special configurations or options please contactfactory for available.INTERNAL SURFACE FINISH05 = 5 Ra 10 = 10 Ra20 = 20 Ra (electropolished)- 10INLET SIZE & TYPE04=1/2”Tube Stubs 06=3/4”Tube Stubs 08=1”Tube Stubs 12=1-1/2”Tube Stubs 16=2”Tube StubsOUTLET SIZE & TYPE02=1/4”Tube Stubs[ ]2=1/4”Optional Fitting End 04=1/2”Tube Stub[ ]4=1/2”Optional Fitting End 06=3/4”Expanded Tube Stub [ ]6=3/4”Optional Fitting EndOptional Fitting Ends M =Male VacuSeal™F =Female VacuSeal™C =Compression Q =Male UltraSeal™U =Female UltraSeal™。

FR605资料

·Low Reverse Recovery Time ·Low Reverse Current·Low Forward Voltage Drop ·High Current Capability·Plastic Material:UL Flammability Classification Rating 94V-0·Case: R-6, Molded Plastic·Terminals: Axial Leads,Solderable per MIL-STD-202Method 208·Polarity: Color Band Denotes Cathode ·Weight: 1.7 grams (approx.)·Mounting Position: AnyCharacteristicSymbol FR601FR 602FR 603FR 604FR 605FR 606FR 607Unit Maximum Recurrent Peak Reverse Voltage V RRM 501002004006008001000V Maximum RMS Voltage V RMS 3570140280420560700V Maximum DC Blocking voltageV DC 501002004006008001000V Maximum Average Forward Rectified Current 9.5mm Lead Length @ T A =75°C I (AV) 6.0A Peak Forward Surge Current8.3ms single half sine-wave superimposed on rated load (JEDEC method)I FSM 300A Maximum Instantaneous Forward Voltage@ 6.0A DCV F 1.3V Maximum DC Reverse Current at Rated Blocking Voltage@ T A = 25°CI R 10m A Maximum Full Load Reverse Current Full Cycle Average 9.5mm lead length @ T L = 55°C I R 150m A Maximum Reverse Recovery Time (Note 1)T rr 150250500ns Typical Junction Capacitance (Note 2)C J 200pF Operating and Storage Temperature RangeT J ,T STG-65 to +175°CNotes:1. Reverse Recovery Test Conditions: I F =0.5A, I R =1.0A,I RR =0.25A2. Measured at 1.0MHz and applied reverse voltage of 4.0V.AAB CDFR601 - FR6076.0A FAST RECOVERY RECTIFIERR-6Dim Min Max A 25.4¾B 8.69.1C 1.2 1.3D8.69.1All Dimensions in mmMechanical DataFeaturesMaximum Ratings and Electrical Characteristics@ T A = 25°C unless otherwise specified.2468255075100125150175I ,A V E R A G E F O R W A R D C U R R E N T(A V )T ,AMBIENT TEMPERATURE (°C)Fig.1,Typical Forward Current Derating CurveA 10100200110100I ,P E A K F O R W A R D S U R G E C U R R E N T (A M P E R E S )F S M NUMBER OF CYCLES AT 60HzFig.4,Maximum Non-Repetitive SurgeCurrent0.111010010000.60.81.01.21.41.61.82.0I ,I N S T A N T A N E O U S F O R W A R D C U R R E N T (A M P E R E S )F V ,INSTANTANEOUS FORWARD VOLTAGE (VOLTS)Fig.3,Typical Instantaneous Forward CharacteristicsF100200300400500600110100I ,P E A K F O R W A R D S U R G E C U R R E N T (A M P E R E S )F s m NUMBER OFCYCLES AT 60HzFig.2,Max Non-Repetitive Peak Surge Current。

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

ITO-220AC
.406(10.3) .390(9.90) .13 4(3. 4)D IA . 11 3(3. 0)D IA . 112 (2. 85) . 100 (2.5 5)
.173(4.4) .124(3.16) .118(3.00)
Low forward voltage drop High current capability High reliability High surge current capability
100
40
10
Tj=125 0C
4 2 1
4 2 1
Tj=25 0C
0.4 0.2 0.1
0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 FORWARD VOLTAGE. (V)
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
元器件交易网
GPAF1601 THRU GPAF1607
Isolation 16.0 AMPS. Glass Passivated Rectifiers
Voltage Range 50 to 1000 Volts Current 16.0 Amperes
Features
.185(4.7)
.2 72( 6. 9) .2 48( 6. 3)
. 606(1 5.5 )
Mechanical Data
Cases: ITO-220AC molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: Leads solderable per MIL-STD202, Method 208 guaranteed Polarity: As marked High temperature soldering guaranteed: 260℃/ 0.25” (6.35mm) from case 10 seconds. Mounting torque: 5 in – 1bs. max. Weight: 2.24 grams
1601 1602 1603 1604 1605 1606 1607 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TC = 100℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @16.0A Maximum DC Reverse Current @ TC=25℃ at Rated DC Blocking Voltage @ TC=125℃
PEAK FORWARD SURGE CURRENT. (A)
AVERAGE FORWARD CURRENT. (A)
16
250
200 8.3ms Single Half Sine Wave JEDEC Method
14 Single Phase Half Wave 60Hz Resistive or Inductive Load
VRRM VRMS VDC I(AV) IFSM VF IR
50 35 50
100 70 100
200 140 200
400 280 400 16.0 250 1.1
600 420 600
800 1000 560 700 800 1000
V V V A A V
10 uA 250 uA Typical Junction Capacitance ( Note 1 ) Cj 100 pF Typical Thermal Resistance (Note 2) ℃/W RθJC 4.0 Operating and Storage Temperature Range TJ ,TSTG ℃ - 65 to + 150 Notes: 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. 2. Thermal Resistance from Junction to Case Mounted on Heatsink size 2” x 3” x 0.25” Al-Plate
FIG.4- TYPICAL REVERSE CHARACTERISTICS
100
INSTANTANEOUS FORWARD CURRENT. (A)
40 20 s 1% Duty Cycle
INSTANTANEOUS REVERSE CURRENT. ( A)
Case Positive
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol GPAF GPAF GPAF GPAF GPAF GPAF GPAF Units Type Number
.0 63 (1 .6 ) MA X
.161(4.1) .146(3.7)
. 583(1 4.8 )
.110( 2.8) .0 98(2 .5)
. 071 (1. 8) MA X
. 543( 13. 8) . 512( 13. 2)
2
PIN 1 PIN 2 CASE
. 10 0( 2 . 55)
. 100 (2.5 5)
150
12
100
10
50
8
0
50 CASE TEMPERATURE. ( C)
o
100
150
0 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz
FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS
400 200
- 556 -
元器件交易网
RATINGS AND CHARACTERISTIC CURVES (GPAF1601 THRU GPAF1607)
FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE
18 300
FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
FIG.5- TYPICAL JUNCTION CAPACITANCE
120 100
JUNCTION CAPACITANCE.(pF)
80 Tj=25 0C
60
40
20
0 1 5 10 50 100 500 1000 REVERSE VOLTAGE. (V)
- 557 -