0524651470;中文规格书,Datasheet资料

合集下载

7443320470;中文规格书,Datasheet资料

Bezeichnung :description :33%Umgebungstemperatur / temperature:+20°CFerriteLagertemp. / storage temperature: -40°C - +60°C BD09-11-03Rst 09-05-05NameDatum / dateÄnderung / modificationVersion 1Version 2Luftfeuchtigkeit / humidity:It is recommended that the temperature of the part does HP 34401 A & Fluke 54II für/for I DC; SPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)Artikelnummer / part number :7443320470D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked .................................................................................................Basismaterial / base material:Metra HIT 27I für/for R DCArbeitstemperatur / operating temperature: -40°C - +125°C WAYNE KERR 3260B für/for L 0; I SAT D Prüfgeräte / test equipment:E Testbedingungen / test conditions:Kunde / customerF Werkstoffe & Zulassungen / material & approvals:G Eigenschaften / general specifications:not exceed 125°C under worst case operating conditions.Draht / wire:JIS 155°C , UL : E201757Würth Elektronik..................................................................................Freigabe erteilt / general release:http://www.we-online.deDatum / date.............................................................................Unterschrift / signatureKontrolliert / approvedWürth Elektronik eiSos GmbH & Co. KGdatecode & part numberBezeichnung :description :H Induktivitätskurve / Inductance curve:BD09-11-03Rst 09-05-05NameDatum / dateSPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)DATUM / DATE : 2009-11-03Freigabe erteilt / general release:Kunde / customer...............................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikVersion 2..........................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400http://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGBezeichnung :description :I Temperaturanstieg / Temperature rise curve:BD09-11-03Rst 09-05-05NameDatum / dateDATUM / DATE : 2009-11-03Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400...............................................................................................................................................................Datum / dateUnterschrift / signaturehttp://www.we-online.deGeprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGSPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)Freigabe erteilt / general release:Kunde / customerWürth ElektronikVersion 2..........................................................................................................................................Bezeichnung :description :BD09-11-03Rst 09-05-05NameDatum / dateSPEICHERDROSSEL WE-HCC 1210 (Ferrit)POWER-CHOKE WE-HCC 1210 (Ferrite)Freigabe erteilt / general release:Kunde / customer...............................................................................................................................................................Datum / dateUnterschrift / signature Würth ElektronikVersion 2............................................................................................................................................Version 1D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400Geprüft / checked Kontrolliert / approvedÄnderung / modificationWürth Elektronik eiSos GmbH & Co. KGThe Force for tearing off cover tape is 20 to 70 grams in arrow direction150°feeding directionThis electronic component has been designed and developed for usage in general electronic equipment. Before incorporating this component into any equipment where higher safety and reliability is especially required or if there is the possibility of direct damage or injury to human body, for example in the range of aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc, Würth Elektronik eiSos GmbH must be informed before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.分销商库存信息: WURTH-ELECTRONICS 7443320470。

0511021100;中文规格书,Datasheet资料

51102-1100 Active
Mini-Lock™ 2.50mm Pitch Mini-Lock™ Wire-to-Board Housing, Friction Lock, 11 Circuits
Product Specification PS-51102-002 (PDF) RoHS Certificate of Compliance (PDF) Series Crimp Housings 51102 Signal, Wire-to-Board, Wire-to-Wire Mini-Lock™ Mini-Lock™ 800754306553 image - Reference only EU RoHS ELV and RoHS Compliant REACH SVHC Contains SVHC: No Low-Halogen Status Not Low-Halogen China RoHS
General
Product Family Series Application Overview Product Name UPC
Physical
Circuits (maximum) Color - Resin Gender Glow-Wire Compliant Lock to Mating Part Material - Resin Net Weight Number of Rows Packaging Type Panel Mount Pitch - Mating Interface Stackable Temperature Range - Operating 11 Natural Female No Yes Polyester 749.600/mg 1 Bag No 2.50mm No -40°C to +105°C

0511020200;中文规格书,Datasheet资料

Material Info Reference - Drawing Numbers
Product Specification Sales Drawing PS-51102-002, RPS-51103-049, RPS-51103-057 SD-51102-**00
ቤተ መጻሕፍቲ ባይዱ
Search Parts in this Series 51102Series Mates With 53375 , 53426 Use With 50351
/
This document was generated on 08/30/2012
PLEASE CHECK FOR LATEST PART INFORMATION
Part Number: Status: Overview: Description: Documents: 3D Model Drawing (PDF)
This document was generated on 08/30/2012
PLEASE CHECK FOR LATEST PART INFORMATION
分销商库存信息:
MOLEX 0511020200
Need more information on product environmental compliance? Email productcompliance@ For a multiple part number RoHS Certificate of Compliance, click here Please visit the Contact Us section for any non-product compliance questions.
51102-0200 Active

051,AL,051,BK-BULK,051,051,GY,051W,AL,051W,BK,051W,GY,051,BK, 规格书,Datasheet 资料

PART NO. 5-1 05 6005
DESCRIPTION (Included) TOP BOTTOM #4X3/8” self tapping (4)
ACCSESSORIES (Optional) PART NO. 51 350 450 DESCRIPTION Non-skid Feet Prototype grid board Prototype clad board
芯天下.02 .25 4 plc's 2.50 Insert Area
A
5.62
.04 X .02 deep
2.00 Insert Area
2.75 4.85 .13
A
5°
0.53" 4 plc's Recessed 0.005" for Non-skid feet (not included)
051(exploded isometric)
-Click on image to show toolbar. Use to Play/Pause Animation. -Left click and drag on image to move 3D model.
W 3.25 L 5.63
H .90
Notes: Enclosure weight .19 lbs / 89 gm 1) Enclosure meets or exceeds IP40 and NEMA 1 2) Circuit Board drawings can be download at: ALL DIMENSIONS ARE ± .010" 3/17/10 (1 of 2) /Accessories/CircuitBoard/drawings/350-450-cbg.pdf 619 Commercial Ave. Covina, CA 91723 3) All components are RoHS Compliant. Ph. (626) 331-0517 Fx. (626) 331-8584

SEA05LTR;中文规格书,Datasheet资料

Preliminary dataThis is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.February 2011Doc ID 18462 Rev 11/12SEA05LAdvanced constant voltage and constant current controllerwith very efficient LED pilot-lamp driverFeatures■Constant voltage and constant current control ■Very efficient LED pilot-lamp driver ■Wide operating V CC range (3.5 V - 36 V)■Low quiescent consumption: 250 µA ■Voltage reference: 2.5 V■Voltage control loop accuracy ± 0.5%■Current sense threshold: 50 mV ■Current control loop accuracy ± 4%■Low external component count ■Open-drain output stage ■SOT23-6L packageApplications■AC-DC adapter with LED pilot-lamp ■Battery chargers with LED pilot-lamp ■SMPS with LED pilot-lampDescriptionThe device is a highly integrated solution for SMPS applications, with an LED pilot-lamp requiring a dual control loop to perform CV (constant voltage) and CC (constant current) regulation.The IC allows very efficient LED pilot-lamp driving which helps to reduce the standby consumption of the SMPS. It integrates a voltage reference, two op-amps (with OR-ed open-drain outputs), a low-side current sensing circuit and an LED pilot-lamp driver pin implemented with an open-drain mosfet driven by square waveform with 12.5% duty cycle at 1 kHz that allows reducing LED consumption.The voltage reference, along with one op-amp, is the core of the voltage control loop. The current sensing circuit and the other op-amp make up the current control loop.The external components needed to complete the two control loops are:- a resistor divider that senses the output of the power supply and fixes the voltage regulation setpoint at the specified value- a sense resistor that feeds the current sensing circuit with a voltage proportional to the DC output current; this resistor determines the currentregulation setpoint and must be adequately rated in terms of power dissipation- the frequency compensation components (R-C networks) for both loops.The device is ideal for space-critical applications.Table 1.Device summaryOrder code Package Packing SEA05LTRSOT23-6LTape & reelContents SEA05LContents1Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.1Voltage and current control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62.2Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82.3LD pin function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112/12Doc ID 18462 Rev 1SEA05L OperationDoc ID 18462 Rev 13/121 OperationTable 2.Absolute maximum ratingsSymbol Pin Parameter Value Unit V CC 6DC supply voltage –0.3 to 38V Vout 5Open-drain voltage –0.3 to V CCV Iout 5Max. sink current 20mA V LD 4Open-drain voltage –0.3 to V CCV I LD 4Max. sink current 15mA Isense 1Analog input –0.3 to V CC V Vctrl3Analog input–0.3 to V CC < 12(1)1.Vctrl cannot exceed V CC and cannot exceed 12 V.VTable 3.Thermal dataSymbol ParameterValue Unit R th j-amb Thermal resistance, junction-to-ambient 250°C/W Tj op Junction temperature operating range –40 to 150°CTstgStorage temperature–55 to 150Table 4.Pin functionsPin numberName Function1IsenseInverting input of the current loop op-amp. The pin is typically used for the current control loop, connecting it to the positive end of the current sense resistor through a decoupling resistor.2GNDGround. Return of the bias current of the device. 0 V reference for allvoltages. The pin has to be tied as close as possible to the ground output terminal of the converter to minimize load current effect on the voltage regulation setpoint.OperationSEA05L4/12Doc ID 18462 Rev 13VctrlInverting input of the voltage loop op-amp. The pin is typically used for the voltage control loop and is connected to the midpoint of a resistor divider that senses the output voltage.4LDOpen-drain output able to sink 5 mA (peak), driven by the internal oscillator at 1 kHz square waveform with 12.5% duty cycle. The internal mosfet starts to switch when V CC is above the turn-on threshold (typ. 3 V) and it is off (LD high impedance) when V CC is below the UVLO of the IC. The pin can be connected to an external LED pilot-lamp with a resistor in series in order to limit the LED current5OUTCommon open-drain output of the two internal op-amps. The pin, only able to sink current, is typically connected to the branch of the optocoupler's photodiode to transmit the error signal to the primary side.6V CCSupply voltage of the device. A small bypass capacitor (0.1 µF typ.) to GND, located as close to the IC pins as possible, might be useful to get a clean supply voltage.Table 4.Pin functions (continued)Pin numberName FunctionSEA05L OperationDoc ID 18462 Rev 15/12Table 5.Electrical characteristics (–25 C° < T j < 125 °C, V CC = 20 V; unless otherwise specified)Symbol ParameterTest conditionMin.Typ.Max.UnitDevice supply V CC Voltage operating range 3.536V I CCQuiescent current(Ictrl = Vsense = 0, OUT = open)250500µAVoltage control loop op-amp Gm v T ransconductance (sink current only)(1) 1 3.5S Vctrl Voltage reference default value (2)T j = 25 °C2.4882.5 2.512V IbiasInverting input bias current25nACurrent control loop Gm i T ransconductance (sink current only) (3) 1.57S V csth Current sense threshold at I(Iout) = 1 mA (4)485052mV IbiasNon-inverting input source current6µAOutput stageV OUTlow Low output level at 2 mA sink current 200400mVLED driver I LD LED driver sink current capability (peak)10mA f LD LED driver current modulation frequency 0.61 1.4kHz V LDlow Low output level at 5 mA sink current (internal mosfet on)450900mV I LD_LKGLED driver leakage current (internal mosfet off)0.5µA1.If the voltage on Vctrl (the negative input of the amplifier) is higher than the positive amplifier input, and it is increased by1mV, the sinking current at the output OUT will be increased by 3.5 mA.2.The internal voltage reference is set at 2.5 V. The voltage control loop precision takes into account the cumulative effects ofthe internal voltage reference deviation as well as the input offset voltage of the transconductance operational amplifier. The internal voltage reference is fixed by bandgap, and trimmed to 0.48 % accuracy at room temperature.3.When the inverting input at Isense is greater than 50 mV, and the voltage is increased by 1 mV, the sinking current at theoutput Out will be increased by 7 mA.4.The internal current sense threshold is triggered when the voltage on pin Isense is 50 mV. The current control loopprecision takes into account the cumulative effects of the internal voltage reference deviation as well as the input offset voltage of the transconductance operational amplifier.6/12Doc ID 18462 Rev 12 Application information2.1 Voltage and current controlVoltage controlThe voltage loop is controlled via a transconductance operational amplifier, the voltage divider R 1, R 2, and the optocoupler which is directly connected to the output. It is possible to choose the values of R 1 and R 2 resistors using Equation 1 and Equation 2:Equation 1Equation 2where V Ois the desired output voltage.As an example, with R 1 = 100 k Ω and R 2 = 15 k Ω V O = 19.17 V.Doc ID 18462 Rev 17/12Current controlThe current loop is controlled via a transconductance operational amplifier, the sense resistor R sense , and the optocoupler.The control equation verifies:Equation 3Equation 4where I Omax is the desired limited current, and V csth is the threshold voltage for the current control loop. As an example, with I omax = 1 A, V csth = 50 mV , then R sense = 50 m Ω.Note that the R sense resistor should be chosen, taking into account the maximum dissipation (P lim ) through it during full load operation.Equation 5As an example, with I Omax = 1 A and V csth = 50 mV , P lim = 50 mW.Therefore, for most adaptor and battery charger applications, a low-power resistor is suitable for the current sensing function.V csth threshold is achieved internally by a voltage divider tied to an internal precise voltage reference. Its midpoint is tied to the positive input of the current control operational amplifier, and its endpoint is connected to GND. The resistors of this voltage divider are matched to provide the best precision possible. The current sinking outputs of the two transconductance operational amplifiers are common (to the output of the IC). This makes an OR function which ensures that whenever the current or the voltage reaches excessively high values, the optocoupler is activated.The relationship between the controlled current and the controlled output voltage can be described with a square characteristic as shown in the following V/I output-power graph (with power supply of the device independent from the output voltage).csthO sense V I R =∗max maxlim O csth I V P ∗=2.2 CompensationThe voltage control transconductance operational amplifier can be fully compensated. Bothits output and negative input are directly accessible for external compensation components.functionpin2.3L DThe device provides a unique feature that allows highly efficient driving of an LED pilot-lamp.The main benefit of this new feature is to allow reducing the standby power consumption ofthe SMPS with the LED pilot-lamp.The LD pin is an open-drain output able to sink 5 mA (peak), driven by the internal oscillatorat 1 kHz (typ.) square waveform with 12.5% duty cycle (see Figure6). The internal mosfetstarts to switch when V CC is above the turn-on threshold (typ 3 V) and it is off (LD highimpedance) when V CC is below the UVLO of the IC.Connecting the LED pilot-lamp, with a resistor in series in order to limit the LED current, topin LD (as shown in Figure5) reduces the power consumption of the LED while keeping thesame driving peak current. The LED driving current modulation frequency of 1 kHz (typ.)eliminates the visual perception of flickering.8/12Doc ID 18462 Rev 1Doc ID 18462 Rev 19/12Package mechanical data SEA05L10/12Doc ID 18462 Rev 13 Package mechanical dataIn order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: . ECOPACK ® is an ST trademark.Note:Dimensions per JEDEC MO178ABTable 6.SOT23-6L (2.90 mm x 2.80 mm) package mechanical dataSymmm inchesMin Typ Max Min Typ MaxA 1.45 0.057 A1 0.00 0.15 0.000 0.006 A2 0.90 1.15 1.30 0.035 0.045 0.051b 0.30 0.50 0.012 0.020c 0.080.22 0.0030.009D 2.90 0.114E 2.80 0.110 E1 1.60 0.063 e 0.95 0.037 e1 1.900.075L 0.30 0.45 0.60 0.012 0.018 0.024 è 0° 4° 8° 0° 4° 8° N 66分销商库存信息: STMSEA05LTR。

07515;中文规格书,Datasheet资料

A
Made in America
Note: Two heel straps are recommended for reliable grounding and ESD protection, providing ground when one foot is off the floor. Operator is grounded when foot is in contact with grounded dissipative or conductive flooring. Desco recommends the use of foot ground tester item No. 19252, 19253, 98280/98273, or 98280/98254. For additional information on the use and maintenance of foot grounders please ask for Technical Bulletins TB-2020, TB-2040, TB-3000. Item 07515 is UL listed.
ITEM # 07515
DESCRIPTION Foot Ground, Heel, 2 megohm resistor, RTG: 106 - 107 ot grounders are rated at 250 VAC. It is not recommended to use them where exposure to line voltages above 250 VAC is possible. Caution: The foot grounder is for ESD control. It will not reduce or increase your risk of receiving electric shock when using or working on electrical equipment.

4802.1300;中文规格书,Datasheet资料

500V dc 500V 1000V dc 1000V dc
0.65A @ 12V ac/dc 1A @ 12V ac/dc 2A @ 12V ac/dc 2A @ 12V ac/dc
<15 m Ω <15 m Ω <15 m Ω <15 m Ω
103 M Ω @ 500V dc 103 M Ω @ 500V dc 103 M Ω @ 500V dc 103 M Ω @ 500V dc
6
/
分销商库存信息:
SCHURTER 4802.1300
-20° to +70°C -20° to +70°C -20° to +70°C -20° to +70°C
10,000 insertions 10,000 insertions 10,000 insertions 50,000 insertions 10,000 insertions
Dielectric Withstand measured between adjacent conductors Die Spannungsfestigkeit wird zwischen den gegenüberliegend Kontakten gemessen.
All contact surfaces on each of the mating sockets are gold-plated for long life and reduced contact resistance. The range consists of 2.5mm, 3.5mm, 6.5mm and 7.5mm sizes in 2 up to 6 switched poles. Standards/Compatibility The 2.5mm range is fully compatible with the JAP standard. To avoid compatibility problems it is advisable not to mix the 3.5mm plugs and sockets with other manufacturers’ products, as this range is not designed to JAP standards. The 6.3mm range is designed and manufactured according to the BPO standard Gauge A and is fully compatible with the JAP standard. For the combination chart please see Page 17.

RJZ-0505S;RJZ-0509S;RJZ-0512S;RJZ-0515S;RJZ-0524S;中文规格书,Datasheet资料

Refer to Application NotesEN-60601-1 CertifiedSelection GuidePart Input Output Output Efficiency Max Number Voltage Voltage Current Capacitive DIP 14 4kV (VDC)(VDC)(mA)(%)Load (1)RJZ-xx3.3S (H) 3.3,5,9,12,15,24 3.360670-753300µF RJZ-xx05S (H) 3.3,5,9,12,15,24540078-851200µF RJZ-xx09S (H) 3.3,5,9,12,15,24922278-841200µF RJZ-xx12S (H) 3.3,5,9,12,15,241216680-85680µF RJZ-xx15S (H) 3.3,5,9,12,15,241513382-85680µF RJZ-xx24S (H) 3.3,5,9,12,15,24248380-85220µF RGZ-xx3.3D (H)3.3,5,9,12,15,24±3.3±30375±1500µF RGZ-xx05D (H) 3.3,5,9,12,15,24±5±20075-82±470µF RGZ-xx09D (H) 3.3,5,9,12,15,24±9±11175-80±470µF RGZ-xx12D (H) 3.3,5,9,12,15,24±12±8478-82±220µF RGZ-xx15D (H) 3.3,5,9,12,15,24±15±6680-84±220µF RGZ-xx24D(H)3.3,5,9,12,15,24±24±4282-84±100µFxx = Input Voltage. Other input and output voltage combinations available on request.* add Suffix “P ”for Continuous Short Circuit Protection, e.g. RGZ-0524D/P , RJZ-0505S/HPO u t p u t P o w e r (%)100602040Operating Temperature °C80Input Voltage Range ±10%Output Voltage Accuracy ±5%Line Voltage Regulation 1.2%/1% of Vin typ.Load Voltage Regulation 3.3V Types ±20% max.(10% to 100% full load)5V Types ±15% max.All other Types±10% max.Output Ripple and Noise (20MHz limited)±150mVp-p max.Temperature Coefficient 0.02%/°C max.Operating Frequency 20kHz min./ 50kHz typ. / 90kHz max.Efficiency at Full Load 70% min. / 80% typ.Minimum Load = 0%Specifications valid for 10% minimum load only.Isolation Voltage (tested for 1 second)3000VDC (rated for 1 minute)1500VAC / 60Hz Isolation Voltage H-Suffix (tested for 1 second)4000VDC min.H-Suffix)(rated for 1 minute)2000VAC / 60HzIsolation Capacitance 120pF max.Isolation Resistance 15G Ωmin.Short Circuit Protection 1 SecondP-SuffixContinuousOperating Temperature Range (free air convection)-40°C to +85°C (see Graph)cont.2 Watt DIP14Single &Dual OutputDerating-Graph(Ambient T emperature)●2W Single and Dual Outputs in DIP 14●3kVDC and 4kVDC Isolation●Optional Continuous Short Circuit Protected ●Custom Solutions Available ●UL94V-0 Package Material ●Efficiency up to 85%FeaturesUnregulated ConvertersSpecifications (measured at T A = 25°C, nominal input voltage, full load and after warm-up)DescriptionThe RJZ and RGZ series converters are available in DIP14 packages, so can be used for applications where component height is restricted.The wide selection of input voltage and output voltage options plus an I/O-Isolation of 3kVDC or 4kVDC as standard makes these converters suitable for many industrial and medical applications.EN-60950-1 Certified RJZ & RGZECONOLINEDC/DC-Converterwith 3 year WarrantyR J Z &R G ZREV: 1/2010E-62RoHS2002/95/EC6/6/Typical CharacteristicsStorage Temperature Range-55°C to +125°CRelative Humidity95% RHPackage Weight 2.8gPacking Quantity24 pcs per TubeMTBF (+25°C)using MIL-HDBK 217F RJZ types893 x 103 hoursRGZtypes810 x 103 hours(+85°C)using MIL-HDBK 217F RJZ types208 x 103 hoursRGZ types151 x 103 hours}Detailed Information seeApplication Notes chapter "MTBF"Specifications - continuedEfficiency%10040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Efficiency%10040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load40%0%100%60%80%20%Total Output current (%)30.000DeviationfromNominal(%)-5.0000.0005.00010.00015.00020.00025.000Deviation / Load40%0%100%60%80%20%Total Output current (%)30.000DeviationfromNominal(%)-5.0000.0005.00010.00015.00020.00025.000RJZ-xx05SRJZ-xx09SEfficiency%10040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load40%0%100%60%80%20%Total Output current (%)30.000DeviationfromNominal(%)-5.0000.0005.00010.00015.00020.00025.000RJZ-xx12SEfficiency%10040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load40%0%100%60%80%20%Total Output current (%)30.000DeviationfromNominal(%)-5.0000.0005.00010.00015.00020.00025.000RJZ-xx15SREV:1/2010E-63RJZ&RGZ /Typical CharacteristicsE f f i c i e n c y %10040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)E f f i c i e n c y %10040%0%100%40Efficiency / Load60%80%20%206080Total Output current (%)Deviation / Load40%0%100%60%80%20%Total Output current (%)30.000D e v i a t i o n f r o m N o m i n a l (%)-5.0000.0005.00010.00015.00020.00025.000Deviation / Load40%0%100%60%80%20%Total Output current (%)30.000D e v i a t i o n f r o m N o m i n a l (%)-5.0000.0005.00010.00015.00020.00025.000RGZ-xx12DRGZ-xx15DPackage Style and Pinning (mm)Dual Output Single Output 3rd angle projectionRecommended Footprint Details14 PIN DIP PackageXX.X ± 0.5 mm XX.XX ± 0.25 mmPin ConnectionsPin #RJZ RGZ 1–Vin –Vin 7NC NC 8+Vout +Vout 9No Pin Com 10–Vout –Vout 14+Vin+VinNC = No Connection E f f i c i e n c y %100040%0%100%40Efficiency / Load 60%80%20%206080Total Output current (%)Deviation / Load30.00040%0%100%D e v i a t i o n f r o m N o m i n a l (%)60%80%20%-5.000Total Output current (%)0.0005.00010.00015.00020.00025.000RGZ-xx05DR J Z &R G ZREV: 1/E-64Notes Note 1Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter.Certifications EN General Safety Report: PS-R7219C1EN60950-1:2001 + A11:2004EN Medical safetyReport: PS090301601EN 60601-1/分销商库存信息:RECOM-POWERRJZ-0505S RJZ-0509S RJZ-0512S RJZ-0515S RJZ-0524S RJZ-053.3S RJZ-0905S RJZ-0909S RJZ-0912S RJZ-0915S RJZ-0924S RJZ-093.3S RJZ-1205S RJZ-1209S RJZ-1212S RJZ-1215S RJZ-1224S RJZ-123.3S RJZ-1505S RJZ-1509S RJZ-1512S RJZ-1515S RJZ-1524S RJZ-153.3S RJZ-2405S RJZ-2409S RJZ-2412S RJZ-2415S RJZ-2424S RJZ-243.3S RJZ-0505S/H RJZ-0505S/P RJZ-0509S/H RJZ-0509S/P RJZ-0512S/H RJZ-0512S/P RJZ-0515S/H RJZ-0515S/P RJZ-0524S/H RJZ-0524S/P RJZ-053.3S/H RJZ-053.3S/P RJZ-0905S/H RJZ-0905S/P RJZ-0909S/H RJZ-0909S/P RJZ-0912S/H RJZ-0912S/P RJZ-0915S/H RJZ-0915S/P RJZ-0924S/H RJZ-0924S/P RJZ-093.3S/H RJZ-093.3S/P RJZ-1205S/H RJZ-1205S/P RJZ-1209S/H RJZ-1209S/P RJZ-1212S/H RJZ-1212S/P RJZ-1215S/H RJZ-1215S/P RJZ-1224S/H RJZ-1224S/P RJZ-123.3S/H RJZ-123.3S/P RGZ-0505D RGZ-0509D RGZ-0512D RGZ-0515D RGZ-0524D RGZ-053.3D RGZ-0905D RGZ-0909D RGZ-0912D RGZ-0915D RGZ-0924D RGZ-093.3D RGZ-1205D RGZ-1209D RGZ-1212D RGZ-1215D RGZ-1224D RGZ-123.3D RJZ-1505S/H RJZ-1505S/P RJZ-1509S/H RJZ-1509S/P RJZ-1512S/H RJZ-1512S/P RJZ-1515S/H RJZ-1515S/P RJZ-1524S/H RJZ-1524S/P RJZ-153.3S/H RJZ-153.3S/P RJZ-2405S/H RJZ-2405S/P RJZ-2409S/H RJZ-2409S/P RJZ-2412S/H RJZ-2412S/P RJZ-2415S/H RJZ-2415S/P RJZ-2424S/H RJZ-2424S/P RJZ-243.3S/H RJZ-243.3S/P RGZ-1505D RGZ-1509D RGZ-1512D RGZ-1515D RGZ-1524D RGZ-153.3D RGZ-2405D RGZ-2409D RGZ-2412D RGZ-2415D RGZ-2424D RGZ-243.3D RGZ-0505D/H RGZ-0505D/P RGZ-0509D/H RGZ-0509D/P RGZ-0512D/H RGZ-0512D/P RGZ-0515D/H RGZ-0515D/P RGZ-0524D/H RGZ-0524D/P RGZ-053.3D/H RGZ-053.3D/P。

744272471;中文规格书,Datasheet资料

5.1 5.0 4.02012-07-172012-07-172008-01-14SStSStSStSStSBaWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:H1: Classification Reflow Profile for SMT components:H2: Classification Reflow ProfilesProfile FeaturePreheat- Temperature Min (T smin ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Ramp-up rate (T L to T P )Liquidous temperature (T L )Time (t L ) maintained above T L Peak package body temperature (T p )Time within 5°C of actual peak temperature (t p )Ramp-down rate (T P to T L )Time 25°C to peak temperature Pb-Free Assembly 150°C 200°C60-180 seconds 3°C/ second max.217°C60-150 seconds See Table H320-30 seconds 6°C/ second max.8 minutes max.refer to IPC/JEDEC J-STD-020DH3: Package Classification Reflow TemperaturePB-Free Assembly PB-Free Assembly PB-Free Assembly Package Thickness< 1.6 mm 1.6 - 2.5 mm ≥ 2.5 mmVolume mm³<350260°C 260°C 250°CVolume mm³350 - 2000260°C 250°C 245°CVolume mm³>2000260°C 245°C 245°Crefer to IPC/JEDEC J-STD-020DH Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-SL5of Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Cleaning solvents which are used to clean the application might damage or change the characteristics of the component.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The soldering profile has to be complied with according to the technical reflow soldering specification, otherwise no warranty will be su-stained.•All products are supposed to be used before the end of the period of 12 months based on the transfer of title, if not a 100% solderability can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744272471。

02560442-000;中文规格书,Datasheet资料

HCD Series– Hermetically Sealed DC LVDT∙ Hermetically sealed, all welded ∙ Stainless steel housing ∙ High level ±10VDC output∙ Stroke ranges from ±0.05 to ±10 inches ∙ Shock and vibration tolerant ∙ MS style connector∙ IEC IP68 rating to 1,000 PSI [70 bars] ∙Captive core optionDESCRIPTIONThe HCD Series hermetically sealed DC operated LVDTs are the perfect choice for high performance measurements in environments containing moisture, dirt, and fluid contaminants. Operating on a nominal ±15VDC supply, these heavy-duty LVDTs deliver an extremely linear, low noise, yet high frequency response ±10VDC output.The integral electrical connector (welded, glass-sealed MS type) provides for easy installation and allows replacing a damaged cable without sacrificing the sensor.The HCD is available in stroke ranges of ±0.05 inch [±1.27mm] up to ±10 inches [±254mm], and with a number of standard options including imperial or metric threaded core, guided core and captive core.Like in most of our LVDTs, the HCD windings are vacuum impregnated with a specially formulated, high temperature, flexible resin, and the coil assembly is potted inside its housing with a two-component epoxy. This provides excellent protection against hostile environments such as high humidity, vibration and shock.Captive core option: The HCD features an optional captive core design (available for most models) that greatly simplifies installation. The core rod and bearing assembly includes a Bronze bearing on the front end for self-alignment, while a PTFE sleeve allows low-friction travel through the stainless steel boreliner (spool tube). The core rod and the bearing assembly are both field serviceable.Also see our other LVDT models with built-in signal conditioning: DC-EC (±DC voltage), DC-SE (single-ended DC voltage), HC-485 (RS485 Digital Series) and the HCT-IS (Intrinsically safe, 4-20mA, 2-wire loop).Measurement Specialties, Inc. (NASDAQ MEAS) offers many other types of sensors and signal conditioners. Data sheets can be downloaded from our web site at: /datasheets.aspxMEAS acquired Schaevitz Sensors and the Schaevitz ®trademark in 2000.FEATURESAPPLICATIONS∙ All-welded stainless steel construction ∙ Harsh industrial environments∙ Shock and vibration tolerant ∙ Pressurized installations up to 1,000 psi ∙ Low noise, ±10VDC output ∙ Paper processing mills∙ Double magnetic shielding∙ Roller gap position feedback ∙ MS type connector (MIL-C-5015)∙Automated test systems∙Calibration certificate supplied with each unit ∙X-Y Positional FeedbackPERFORMANCE SPECIFICATIONSNotes:All values are nominal unless otherwise notedDimensions are in inch [mm] unless otherwise notedFR: Full Range is the stroke range, end to end; FR=2xS for ±S stroke rangeFSO (Full Scale Output): Largest absolute value of the outputs measured at the ends of the range WIRING INFORMATIONA through F: Connector pin assignmentsMECHANICAL SPECIFICATIONS – NON CAPTIVE CORE (STANDARD)MECHANICAL SPECIFICATIONS – CAPTIVE CORE OPTIONDimensions are in inch [mm]ORDERING INFORMATIONNote: Add multiple option dash numbers together to determine proper ordering suffixExample: HCD 1000, ±1 inch, with captive core and metric threaded connecting rod, P/N 02560444-206Refe r to our “ Accessories for LVDTs” data sheet for our LVDT signal conditioning instrumentation and other accessories. TECHNICAL CONTACT INFORMATIONThe information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters mus t be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others.分销商库存信息: MEASUREMENT-SPECIALTIES 02560442-000。

0436500429;中文规格书,Datasheet资料

This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:43650-0429Status:ActiveOverview:Micro-Fit 3.0™ ConnectorsDescription:3.00mm Pitch Micro-Fit 3.0™ Header, Surface Mount Compatible, Single Row, Vertical,with PCB Polarizing Peg, 4 Circuits, 0.76µm Gold (Au) Selective Plating, Glow Wire CompatibleDocuments:3D ModelTest Summary TS-43045-002 (PDF)Drawing (PDF)RoHS Certificate of Compliance (PDF)Product Specification PS-43650 (PDF)Product Literature (PDF)Agency CertificationCSA LR19980TUV R72081037ULE29179GeneralProduct Family PCB Headers Series43650Application Power, Wire-to-BoardComments"High Temperature|Square Pin|Solder TypeThis Molex product is manufactured from material that has the following ratings, tested by independent agencies:.a) A Glow Wire Ignition Temperature (GWIT) of at least 775 deg C per IEC 60695-2-13.. b) A Glow Wire Flammability Index (GWFI) above 850 deg C per IEC 60695-2-12.and hence complies with therequirements set out in the International Standard IEC 60335-1 5th edition - household and similar electrical appliances - safety, section 30 Resistance to heat and fire. The customers using this product must determine its suitability for use in their particular application through testing or other acceptable means as described in end-product glow-wire flammability test standard IEC 60695-2-11 and any applicable product end-use standard(s). If it is determined during the customer’s evaluation of suitability, that higher performance is required, please contact Molex for possible product options."OverviewMicro-Fit 3.0™ Connectors Product Literature Order No 987650-5984Product Name Micro-Fit 3.0™UPC800753879201PhysicalBreakawayNo Circuits (Loaded)4Circuits (maximum)4Color - ResinBlack Durability (mating cycles max)30Flammability94V-0Glow-Wire Compliant Yes Lock to Mating Part YesMated Height 17.27mm Material - MetalBrassSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Low-HalogenNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 43650SeriesMates With43645 Micro-Fit 3.0™ Receptacle HousingMaterial - Plating Mating GoldMaterial - Plating Termination TinMaterial - Resin High Temperature ThermoplasticNet Weight0.736/gNumber of Rows1Orientation VerticalPC Tail Length 3.18mmPCB Locator YesPCB Retention NonePCB Thickness - Recommended 1.60mmPackaging Type TrayPitch - Mating Interface 3.00mmPlating min - Mating0.762µmPlating min - Termination 2.540µmPolarized to PCB YesShrouded FullyStackable NoSurface Mount Compatible (SMC)YesTemperature Range - Operating-40°C to +105°CTermination Interface: Style Through HoleElectricalCurrent - Maximum per Contact5AVoltage - Maximum250VSolder Process DataDuration at Max. Process Temperature (seconds)30Lead-free Process Capability SMC & Wave Capable (TH only)Max. Cycles at Max. Process Temperature3Process Temperature max. C260Material InfoReference - Drawing NumbersProduct Specification PS-43650Sales Drawing SD-43650-010Test Summary TS-43045-002This document was generated on 08/20/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0436500429。

744710205;中文规格书,Datasheet资料

3.1 3.0 2.02012-06-272012-05-022006-11-23SStSStRStSStCZWürth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyTel. +49 (0) 79 42 945 - 0A Dimensions: [mm]F Typical Impedance Characteristics:H4: Classification Wave Soldering Profile:H5: Classification Wave ProfileProfile FeaturePreheat- Temperature Min (T smin )- Temperature Typical (T stypical ) - Temperature Max (T smax ) - Time (t s ) from (T smin to T smax )Δ preheat to max Temperature Peak temperature (T p )Time of actual peak temperature (t p )Ramp-down rate - Min - Typical - MaxTime 25°C to 25°C Pb-Free Assembly 100°C 120°C 130°C 70 seconds 150°C max.250°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesSn-Pb Assembly 100°C 120°C 130°C 70 seconds 150°C max.235°C - 260°C max. 10 secondsmax. 5 second each wave ~ 2 K/s ~ 3.5 K/s ~ 5 K/s 4 minutesrefer to EN 61760-1:2006H Soldering Specifications:I Cautions and Warnings:The following conditions apply to all goods within the product series of WE-SDof Würth Elektronik eiSos GmbH & Co. KG:General:All recommendations according to the general technical specifications of the data-sheet have to be complied with.The disposal and operation of the product within ambient conditions which probably alloy or harm the wire isolation has to be avoided.If the product is potted in customer applications, the potting material might shrink during and after hardening. Accordingly to this the product is exposed to the pressure of the potting material with the effect that the core, wire and termination is possibly damaged by this pressure and so the electrical as well as the mechanical characteristics are endanger to be affected. After the potting material is cured, the core, wire and termination of the product have to be checked if any reduced electrical or mechanical functions or destructions have occurred.The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products do also apply for customer specific products.Washing varnish agent that is used during the production to clean the application might damage or change the characteristics of the wire in-sulation, the marking or the plating. The washing varnish agent could have a negative effect on the long turn function of the product.Direct mechanical impact to the product shall be prevented as the ferrite material of the core could flake or in the worst case it could break. Product specific:Follow all instructions mentioned in the datasheet, especially:•The solder profile has to be complied with according to the technical wave soldering specification, otherwise no warranty will be sustai-ned.•All products are supposed to be used before the end of the period of 12 months based on the product date-code, if not a 100% solderabi-lity can´t be warranted.•Violation of the technical product specifications such as exceeding the nominal rated current will result in the loss of warranty.1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the are-as, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibi-lity for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime can-not be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component.3. Best Care and AttentionAny product-specific notes, warnings and cautions must be strictly observed.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve spe-cific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Secti-on 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a stan-dard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability ex-pectancy before or when the product for application design-in disposal is considered.The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .J Important Notes:The following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:分销商库存信息: WURTH-ELECTRONICS 744710205。

WM051RI 规格书,Datasheet 资料

A
2.50
.12 6 plc's .25 4 plc's
3.30
6.10 5.27 Insert Area
2.75
4.85 5.62
6.62
.14 6 plc's for #4 screws
A
பைடு நூலகம்
2.78
Insert Area Non-Texture 0.01 recessed
5° typ. .10 2.50 .26 typ. 4 plc's
.32 tp. 4 plc's
.23 typ. 4 plc's
SECTION A-A SCALE 1 : 1.73
ALL DIMENSIONS ARE ± .010" 6/02/09 (2 of 2) /Accessories/CircuitBoard/drawings/350-450-cbg.pdf 619 Commercial Ave. Covina, CA 91723 4) All components are RoHS Compliant. Ph. (626) 331-0517 Fx. (626) 331-8584
ACCSESSORIES (Optional) PART NO. 50 PS-15 350 450 DESCRIPTION Non-skid Feet Perimeter Seal Prototype grid board Prototype clad board
Notes: 1) Enclosure meets or exceeds IP40 and NEMA 1 2) When used with PS-15 the enclosure meets or exceeds IP 67 and NEMA 4X, 12 and 13 MIL-STD-810G 506.5 3) Circuit Board drawings can be download at:

1、下载文档前请自行甄别文档内容的完整性，平台不提供额外的编辑、内容补充、找答案等附加服务。
2、"仅部分预览"的文档,不可在线预览部分如存在完整性等问题,可反馈申请退款(可完整预览的文档不适用该条件!)。
3、如文档侵犯您的权益，请联系客服反馈,我们会尽快为您处理(人工客服工作时间：9:00-18:30)。

This document was generated on 08/13/2012
PLEASE CHECK FOR LATEST PART INFORMATION
Part Number:52465-1470Status:Active
Description:
0.80mm Pitch Board-to-Board Receptacle, Surface Mount, Dual Row, 14 Circuits,Lead-Free, with Locating Peg
Documents:3D Model
Product Specification PS-52465-014 (PDF)Drawing (PDF)
Product Specification PS-52465-015 (PDF)Product Specification PS-52465-010 (PDF)
RoHS Certificate of Compliance (PDF)
General
Product Family PCB Receptacles Series
52465
Application Board-to-Board, Signal Product Name N/A
UPC
822348203734
Physical
Circuits (Loaded)14Circuits (maximum)14
Color - Resin
Natural Durability (mating cycles max)30Glow-Wire Compliant No Lock to Mating Part None
Mated Height 4.50mm, 5.65mm Material - Metal
Phosphor Bronze Material - Plating Mating
Tin Material - Plating Termination Tin
Material - Resin High Temperature Thermoplastic Net Weight
157.569/mg Number of Rows 2
Orientation Vertical PCB Locator Yes PCB Retention
None PCB Thickness - Recommended 1.60mm
Packaging Type
Embossed Tape on Reel Pitch - Mating Interface 0.80mm Plating min - Mating
1.016µm Plating min - Termination 1.016µm Polarized to PCB
No Surface Mount Compatible (SMC)N/A
Temperature Range - Operating -20°C to +105°C Termination Interface: Style
Surface Mount Electrical
Current - Maximum per Contact 0.5A Voltage - Maximum
50V
Material Info
Reference - Drawing Numbers
Product Specification PS-52465-010, PS-52465-014, PS-52465-015,RPS-52465-042, RPS-52465-048, RPS-52465-049Sales Drawing
SD-52465-024, SD-52465-025
Series
image - Reference only
EU RoHS
China RoHS
ELV and RoHS Compliant REACH SVHC
Contains SVHC: No Low-Halogen Status Not Low-Halogen
Need more information on product environmental compliance?
Email productcompliance@
For a multiple part number RoHS Certificate of Compliance, click here
Please visit the Contact Us section for any non-product compliance questions.
Search Parts in this Series 52465Series Mates With 53307 , 53309
This document was generated on 08/13/2012
PLEASE CHECK FOR LATEST PART INFORMATION
分销商库存信息: MOLEX 0524651470。