Pyle PL1SN104 用户手册说明书

Adjustable Viewing Angle 10.1'' Touch Screen TFT/LCD Monitor
Single Din MP5 Player With Swivel Screen, Phone Link, With Backup Camera
PL1SN104
User’s Manual
Precautions
Wiring Diagram
General Operation
AM/FM Tuner Operation
Multimedia player
Music playing interface
Viedo or Picture playing interface AUX in/ Rearview Camera
Wireless BT Streaming
AutoLink Software (Phone Link) Setting Menu
Troubleshooting
Systematic Parameter
Disassembly Steps of Display
Rear View Backup Camera Installation
2 3 5 6 7 7 7 7 8 9 11 12 14 15 16
Precautions
1. When the interior of the car is extremely cold and the unit is used soon after switching on the
heater, moisture may form on the disc or the optical parts of the player and proper playback
may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms
on the optical parts of the player, do not use the player for about one hour. The condensation
will disappear naturally allowing normal operation.
2. This unit uses precision parts and components for its operation. In the event that trouble arises,
never open the case, disassemble the unit, or lubricate the rotating parts. Contact your service
center.
3. This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec
tion against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio reception, which can be determined by turning the
equipment off and on, the user is encouraged to consult an experienced radio technician for
help.
2
Wiring-Color Wiring:
4
5
General Operation:
Profile of main interface
1.Time Setting
2. Radio
3. Bluetooth
4. USB
5. SD Card
6. Navigation (optional)
Note: If there is no any device connection, icons for USB, SD will be showed no device. Click is invalid in this case. Display setting is invalid if there is no audio or video playing.
Radio
• Radio Region: Set the unit for one for the following regions: Europe, America, China, Russia, Japan, RDS (on/off)
Multimedia player
• Support lots of video and audio formats
• Subwoofer: Tum the subwoofer output On or Off • EQ-Sertting: Pop, Rock, Classic, Jazz or Off Time
• Slide the figures in the set time interface
Language
• Language: Select desired language(English, Spanish, Deutsch, Russian, Portuguese, French, Chinese, etc.
Camera input
• Connect the camera with this device, can be auto detected brake signal when reversing. (Note:
Camera is not included)
7. Steering Wheel Control Setting 8. EQ
9. Wallpaper 10. AUX 11. AutoLink 12. Settings
Car logo
• Preset car logo to match your car brand
Steering wheel control
• Set the function button on you steering wheel via the system learning setting AUX Input
• Connect an optional audio video source to the Aux input AM/FM Tuner Operation
Radio interface RDS turn on function
Touch Radio icon in main interface to switch to radio mode.
Multimedia player
• Support MP3.WMA.AVI,MOV,MP4,RMVB,VOB,FLV,etc media format • Support SD,USB,MMC
• Support JPEG,BMP,PNG etc.picture format
Music interface
• The system will automatically read USB, SD.
• The user can directly click options in directory menu to perform play.
6
Short press this button to downward search the station semi-automatically Short press this button to upward search the station semi -automatically Switch the receiving band Locate / remote channel
Single track, In FM band, press this button to switch between ST and MONO,
The default setting is ST. AM band doesn”t have this function Scan EQ
7
1. C
lick the icon to enter the playlist
Play / Pause
EQ
Select Previous Program / Title / Song Select Next Program / Title / Song Volume Selection
Title Menu Video or Picture playing interface
Note : S liding the controlling bar in the bottom to show the next page.AUX in (Auxiliary device input)
Click in from the main interface SRC key in remote control to switch to AUX in Mode. AUX in enables external media sources to connect to the system, like camera, video games, Walkman, external navigation box
(controlled by remote controller)etc. No auxiliary device input shows at the below picture. Connect external devices through the 3.5mm auxiliary audio/video input. It can display the corresponding picture as the output video.
Rearview Camera
Auto operation : After connect with reverse camera, it will automatically detect the reverse signal and show the reverse pictures. The system will swift to any mode to rear view lens mode automatically. When reverse is
over, the system will come back to previous mode.
Wireless BT Streaming
Wireless BT Music
The phone must support A2DP agreement. Press BT Music icon in the main interface. Under the connected mode, click play keys in Wireless BT interface to play different music formats restored in the phone. Due to different types of phones, music can be played either by choosing music player on the phone or click the play key in the Wireless BT interface.
8
EQ Setup
Phone
BT Phone
Phone Book
BT Music
Dialing Call records
Phone book
Bluetooth music EQ Settings
9
AutoLink Software(Phone Link)
Connect your ANDROID phone or iPhone to the unit with original USB cable,touch the AutoLink icon,open the menu,then follow the instructions.
AutoLink connects your device to your Android mobile phone and iPhone through the standard USB port and transfer the picture and sound from the phone to the device. You can control the phone through the device's screen , such as receiving calls, dialing calls, listening to music, watching movies or
photos.
AutoLink
10
AutoLink
AutoLink
11Setting
System
Setting Disc Setting
Time&Date Setting Vsurround Setting
Frames Adjust Setting Panel Setting
Ledcolor
Setting Version Setting
Phenomenon
Normal
Not operating Remote comtrol doesn' t work
No or low sound Inferior quality of sound; Distortion of sound Machine reset by
itself when it is shut down Reasons Fuse of machine power supply and auto vehicle battery is burnt, Volatge of power supply is overloaded Automatic protection system avoids fault due to illegal operation Wrong pin assignment ISO connector Battery is out of power; Battery is not placed correctly Disconnection;Volume setting is low volume; wrong connection of Silence; Loudspeaker fault;Volume balance setting bias Earthing in loudspeaker connection Inferior disc is used;Loudspeaker does not match impedance of the machine; Loudspeaker opens circuit.Connection of ACC and B+ is not correct.Solutions
Change for fuse of the
cottect types;
Adjust voltage;
Reset the system by pressing the
Resetkey Check the wiring
diagram
Change new battery;
Reinstall battery
Check the connecion; Increase the
volume; Reconnection the silence
wire complied with the installation
instruction; Change for a new
loudspeaker; Adjust the volume
balance setting to middle place;
Keep insulation of loudspeaker
connection
Use genuine discs;
Change a loudspeaker;
Check the connection of loudspeaker.Check and reconnect ACC and B+Troubleshooting
Wheel Set Setting
Connect the steering wheel control cable, and click the corresponding key to
activate the function.
After entering into the steering wheel control interface, then keep pressing
the steering wheel “VOL+” button in your car, at the same time click
“ ”in the interface, it will be selected, then it is finish this setting.
Click other buttons according this method, the steering wheel function can
be used.
Trouble
Radio
Weak signal
Disc/Card Reading Break-down during playing Wrong information is shown on the panel
E rror or not operating
Disc cannot enter the device Disc does not play
SD card readable by PC but unreadable by the device Nonrepeat and search function while play VCD Cause(s)
Auto antenna does not reach out completely
LOG function is under working state
Disc is stained or scratched; Documents or
records are damaged
The screen cannot display all the
information.
Illegal operation
There is disc already in side the devic. Disc
is not fully accepted.
The disk level surpasser the level setting of
Lock function; The area code of the disc is
not compatible; Disc is turned upside down.
Due to compatibility reasons of SD card
brand, not all of the SD card can be read
under the system. Or you may wrongly use
MMc card as SD card.
PBC service is functioning
Solution (s)
Connect auto antenna line correctly;
Close LOC function.
Clean or replace the disk; Replace the
disk or choose stored file
Hold the E J E CT key for 5 senconds to
reread the device.
T ake out the disk inside the machine
and replace a new disc Transport the
screws
Adjust the level setting of Lock feature;
Use a compatible disk; Keep the side
with sign up when insert the disk.
The present system mainly support the
following SD card brands: San Dick,
KingMAX, Kingston, Panasonic,
Apacer etc.
Shut down PBC service
13
Systematic Parameter
Specifications
• Working voltage: Direct current 12V
• Working voltage range: 10.8V-16V
• Maximum working electronic current: 10A • Installation angle: less than 30 degree
tilted the front side and backside
Device Type(•*)
USB/SD • MP3
• WMA
• JPEG (1080x920)
• AVI
• RMVB
• MPG
• DAT
• Power output: 4X80 W
• Impedance 4ohm
• SNR: 70dBA
• Frequency Response: 20Hz-20kHz
Video
• Standards: NTSC. PAL (Auto recognition)
• Output: 1 Vp-p (75ohm)
• Input: 1Vp-p (75ohm)
Features:
• Single Din Size Universal Standard
• Hi-Res 10.1'' Digital Display
• Full HD 1080 Support
• USB Flash Drive Reader
• AM/FM Radio with 30 Station Memory
• Video Aux (RCA) Input/Output Connector Jacks
• Rearview Backup Camera Support
• Audio Aux (RCA) Input/Output Connector Jacks
• Marine Grade Waterproof Construction • Night Vision Illumination
• Total Pixels: 656 x 492
• 170 Degree Wide Viewing Angle
• 420 TVL Horizontal Resolution FM Radio
• Frequency modulation:
87.5 MHz ~108.0MHz (Europe)
• Flexibility (-30dB):10dBu
SNR (-50dB):15dBu
• Frequent sound range: 30H2~15kHz (+3dB)
AM Radio
• Frequency range:
522KHZ-1620KHZ (Europe)
• Sensitivity (SN=20dB): 20dBu
• Image rejection: 60dB
• Frequency response: 50HZ-2KHZ (+-3dB)
Display
• Screen type: TFT
• Response time: up=30 millisecond.
• Down=50 millisecond
• Angle range: depression angle=65°
• elevation angle=40<>
• Left vision=65 Right vision=65
Environment temperature
• Operation temperature:
-4°F~158°F or -20~+70°C
• Maintenance temperature:
-22°F~176°F or -30°C~80°C
• Operating humidity: 45%~+80%°C
(relative humidity)
• Maintenance humidity: 30%~90%
(relative humidity)
14
Disassembly Steps of Display
2. Remove the display.
1. Pull the two clips(A&B) on the
back of the display to both sides.
4. Disassembly completed.
3. Press the clips toward the center
and unplug the cable.
15
16
Rear View Backup Camera Installation
WARNING: Failure to read and follow these warnings and instructions may result in serious injury, including damaged property, so please pay close attention and exhibit the utmost care.
• The Digital Backup Camera is designed as an aid to the driver in detecting potentially hazardous driving
conditions, obstructions, and large stationary objects. You, the driver, must also remember to drive safely and properly. Use of the Digital Backup Camera is not a substitute for safe, proper and legal driving practices.
• Never back up while looking only at your connected monitor display screen. You should always check behind and around the vehicle when backing up just as you would if the vehicle did not have the Digital Backup Camera. Always make sure your driving area is clear. Always back up slowly and with caution.
• Never depend on the Backup Camera entirely when backing up. The image on the monitor display screen may be slightly different from actual and real-time conditions. Objects viewed in the rear view monitor differ from actual distances because a wide-angle lens is used. So use the camera as an aid and always follow intended driving practices to properly judge distances from objects.
• The Backup Camera's assisted low lux lighting performance feature is also an aid to a driver. Always use your own eyes to confirm the vehicle’s surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed with caution and perform double-checks before proceeding.
• The area displayed by the Backup Camera is limited. It does not display objects that are close to or just below the bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to your vehicle's orientation on the road or changing road conditions.
• Be sure to check the camera is properly functioning, is properly positioned and securely mounted, every time you operate your vehicle.
• Make sure your trunk or hatch operates correctly, as intended, before and after installation.
• Proceed with caution when cleaning your vehicle around the camera. Avoid excess water exposure around the camera especially with spraying or a power washer.
• Please make sure to keep the camera clean and unobstructed from any debris
• Follow all traffic laws and motor vehicle regulations.
• Consult local laws and regulations for any restrictions on installation or use.
• Using a Backup Camera System is not adequate enough to completely eliminate a vehicle’s blind spot. Always remember to drive with caution, following all traffic laws.
Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable installing the product. Prior to using and installing the Backup Camera System, please read the safety information provided in this user manual. Be sure to use the product as outlined in this user manual. Altercation or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
System Installation and Wiring
Note: Camera System installation on diesel vehicles may require a slightly different wiring install.
Caution: Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle. Refer to the model's power requirements prior to connection and installation.
QUICK INSTALLATION:
This rearview backup camera system comes with camera and installation wiring. When installing, the camera is preferably to be mounted in the rear of your vehicle (just above the license plate).
This kit includes necessary wiring and cable connector accessories sufficient for typical connections.
However, additional accessory cables and installation materials may be necessary for completely
secure and operational backup camera performance.
Camera Connection:
Connect the camera to the using the included DC 12V power cable. Connect the DC 12V power cable to the positive 12V reverse tail light in the rear of your vehicle. Then, connect the black wire, of the DC 12V power cable, and ground properly. This connected power and ground cable then connects to the camera, and will supply power to the camera directly.
Next, use the included yellow RCA video connector cable, and run that cable from the yellow RCA video connector jack of the camera,to the yellow video connector of your compatible display monitor.
The yellow RCA cable when connected, automatically retrieves the video signal when activated (when your vehicle is switched into the reverse gear).
Installation Transcript:
1. Locate the reverse taillight wiring behind your vehicle's reverse light. You may need to remove an
interior panel, or other cover, in order to locate the wiring. Connect the included power 12V DC
power cable to the reverse light.
a. Connect the power cable's Red wire to your vehicle's reverse light positive wire.
b. Connect the power cable's Black wire to your vehicle's reverse light negative wire.
2. Connect the camera to this 'reverse light' connection installation, then mount the camera in the
desired location.
3. Run the RCA video cable from the camera to your compatible video display monitor.
* Please remember to run cables in the least obtrusive route possible. Vehicle vibrations and bumpy driving conditions ca result, so extra care should be taken to securely mount the camera and fasten all cables and wiring to secure locations.
* Ensure the wires are safely and securely connected, with proper isolation applied to all connections.
Additional Notes:
• Determine the best location for the camera (The camera is preferably mounted just above the license plate).
• Be sure when running the connection cables to leave a small amount of slack so you can still move the camera around the license plate, if you decide to slightly adjust the camera's positioning at a later time.
• After installation, test the camera before use. Placing your vehicle in reverse should provide a picture in the monitor within the rearview mirror assembly.
17
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800Email: *******************
18
Angle Adjustable Camera Lens
• Located on the camera housing are 2 screws which lock the camera lens angle in position.• The screws may be loosened to allow camera lens angle adjustment • Loosen the screws, adjust the camera lens into the desired angle. then tighten the screws securely.• Be sure as to not overtighten the screws.。