门式墩模板施工工艺流程

门式墩模板施工工艺流程
1.在施工现场确认门式墩模板的安装位置。

At the construction site, confirm the installation position of the door pier formwork.
2.进行地基处理，确保门式墩模板的安装基础坚固平整。

Carry out foundation treatment to ensure the solid and flat installation foundation of the door pier formwork.
3.搭设门式墩模板支架，并进行水平和垂直调整。

Set up the support frame for the door pier formwork and make horizontal and vertical adjustments.
4.安装门式墩模板的横梁和立柱，注意固定连接处的牢固性。

Install the beams and columns of the door pier formwork, paying attention to the firmness of the fixed connections.
5.使用合适的固定件将门式墩模板与支撑结构连接牢固。

Use appropriate fasteners to firmly connect the door pier formwork to the support structure.
6.对门式墩模板进行检查，确保各部件安装正确无误。

Inspect the door pier formwork to ensure that all components are installed correctly.
7.进行模板的外表处理，保证模板表面光滑平整。

Carry out the surface treatment of the formwork to ensure
a smooth and flat surface.
8.进行模板的防潮处理，防止混凝土浇筑过程中的水分渗透。

Carry out moisture-proof treatment of the formwork to prevent the penetration of water during concrete pouring.
9.在模板各连接处涂抹防粘剂，以确保混凝土浇筑后易于拆卸模板。

Apply anti-sticking agent at the connections of the formwork to ensure easy disassembly after concrete pouring.
10.开始进行门式墩模板的混凝土浇筑工作。

Begin the concrete pouring for the door pier formwork.
11.在浇筑混凝土过程中，及时对模板进行震实和调整，确保混凝土浇筑后的表面平整。

During the concrete pouring process, timely compact and adjust the formwork to ensure a flat surface after pouring.
12.混凝土浇筑完成后，进行模板的拆除工作。

After the concrete pouring is completed, start the formwork removal work.
13.小心拆卸门式墩模板，避免损坏混凝土和模板本身。

Carefully disassemble the door pier formwork to avoid damaging the concrete and the formwork itself.
14.对拆卸下来的门式墩模板进行清理和整理，以备后续使用。

Clean and tidy up the disassembled door pier formwork for future use.
15.对模板使用过程中的损坏部件进行修复或更换，保证模板的质量和可靠性。

Repair or replace damaged parts of the formwork used to ensure the quality and reliability of the formwork.
16.对门式墩模板的拆卸和使用过程进行记录和总结，为下一次施工工艺提供经验和参考。

Record and summarize the disassembly and use of the door pier formwork to provide experience and reference for the next construction process.
17.检查门式墩混凝土的材料，以确保其符合设计要求。

Check the materials of the door pier concrete to ensure that it meets the design requirements.
18.安装模板支撑物，确保承重。

Install formwork supports to ensure weight bearing.
19.在模板构件之间安装密封材料，以防止混凝土渗漏。

Install sealing materials between formwork components to prevent concrete leakage.
20.进行浇筑前的最后一次检查，确保门式墩模板安装的稳固性和
牢固性。

Perform a final inspection before pouring to ensure the stability and firmness of the door pier formwork installation.
21.周边施工区域设立警示标识，确保施工安全。

Set up warning signs in the surrounding construction area to ensure construction safety.
22.严格按照门式墩模板施工工艺流程进行操作，确保施工质量。

Strictly follow the construction process of the door pier formwork to ensure construction quality.
23.进行门式墩模板的封顶工作，保护模板内的混凝土免受外界环
境影响。

Carry out the capping work of the door pier formwork to protect the concrete inside the formwork from external environmental influences.
24.对门式墩模板所使用的材料进行验收，确保材料质量合格。

Check the materials used for the door pier formwork to ensure the quality of the materials.
25.根据设计要求对门式墩模板进行型材修整，确保模板尺寸符合
要求。

Trim the profile of the door pier formwork according to
the design requirements to ensure that the dimensions of the formwork meet the requirements.
26.门式墩模板的支撑结构提前加固，以防止在施工过程中发生倒
塌事故。

Reinforce the support structure of the door pier formwork in advance to prevent collapse accidents during construction.
27.施工人员需穿着符合安全要求的个人防护装备，确保施工安全。

Construction personnel must wear personal protective equipment that meets safety requirements to ensure construction safety.
28.检查门式墩模板上的螺栓、连接件等紧固件，确保牢固可靠。

Check the bolts, connectors, and other fasteners on the door pier formwork to ensure firmness and reliability.
29.对门式墩模板的安装位置进行标线，确保安装准确无误。

Mark the installation position of the door pier formwork to ensure accurate and correct installation.
30.在施工现场设立安全警戒线，禁止无关人员入内。

Set up safety warning lines at the construction site to prevent unrelated personnel from entering.
31.安装门式墩模板的支撑杆，保证模板的稳固性。

Install support rods for the door pier formwork to ensure the stability of the formwork.
32.采取防护措施，确保门式墩模板施工过程中不会对周边环境造
成影响。

Take protective measures to ensure that the construction
of the door pier formwork will not affect the surrounding environment.
33.根据混凝土浇筑方案，合理安排门式墩模板施工进度。

According to the concrete pouring plan, arrange the construction schedule of the door pier formwork reasonably.
34.严格按照施工图纸要求进行门式墩模板的搭设和设置。

Set up and install the door pier formwork strictly according to the construction drawings.
35.对门式墩模板的混凝土浇筑工作进行监测，确保浇筑质量达标。

Monitor the concrete pouring of the door pier formwork to ensure that the pouring quality meets the standards.
36.根据施工需要对门式墩模板进行必要的加固处理。

Reinforce the door pier formwork as necessary according to construction needs.
37.钢筋在混凝土浇筑前按照设计要求正确布置和固定。

Reinforcement steel bars are arranged and fixed correctly according to the design requirements before concrete pouring.
38.制定门式墩模板施工方案，明确各项工作任务和责任。

Develop a construction plan for the door pier formwork, clarifying the tasks and responsibilities.
39.进行门式墩模板的验收工作，确保施工合格。

Carry out the acceptance of the door pier formwork to ensure the construction is qualified.
40.对门式墩模板的材料进行登记、统计和保管，防止材料浪费和损坏。

Register, count, and store the materials of the door pier formwork to prevent waste and damage.
41.混凝土浇筑前，对门式墩模板的支撑结构进行最后检查，确保
安全可靠。

Before concrete pouring, perform a final inspection of
the support structure of the door pier formwork to ensure safety and reliability.
42.设计和安排合理的施工人员工作岗位，确保门式墩模板安装过
程的顺利进行。

Design and arrange reasonable work positions for construction personnel to ensure the smooth installation process of the door pier formwork.
43.确保门式墩模板安装过程中采取适当的防水措施，以避免模板
受潮变形。

Ensure that appropriate waterproof measures are taken during the installation of the door pier formwork to prevent deformation due to moisture.
44.门式墩模板施工结束后，对施工现场进行清理，保持环境整洁。

After the construction of the door pier formwork is completed, clean up the construction site to keep the environment tidy.
45.进行门式墩模板的运输和装卸工作，确保模板完好无损。

Carry out the transportation and handling of the door pier formwork to ensure that the formwork is intact.
46.对门式墩模板支撑结构进行安全评估，提前发现并消除安全隐患。

Conduct a safety assessment of the support structure of the door pier formwork to identify and eliminate safety hazards in advance.
47.组织施工人员进行门式墩模板的安装培训，提高操作技术和安全意识。

Organize construction personnel to conduct installation training for the door pier formwork to improve operational skills and safety awareness.
48.对门式墩模板的周边环境和设施进行检查，确保施工过程中不会受到干扰。

Inspect the surrounding environment and facilities of the door pier formwork to ensure that the construction process will not be disturbed.
49.进行门式墩模板的线型检测和调整，以确保模板的垂直度和平整度。

Carry out linearity testing and adjustments for the door pier formwork to ensure its verticality and flatness.
50.确保门式墩混凝土浇筑施工过程中，人员密集区域采取隔离措施，防止事故发生。

Ensure that isolation measures are taken in densely populated areas during the construction of the door pier concrete pouring to prevent accidents.
51.进行门式墩模板的表面处理和防腐蚀涂装，延长模板的使用寿命。

Carry out surface treatment and anti-corrosion painting of the door pier formwork to extend its service life.
52.完成门式墩模板安装工程后，组织人员进行工程验收，保证工程质量。

After completing the installation of the door pier formwork, organize personnel to conduct project acceptance to ensure construction quality.。