DIN 981 Locknut
RT9817 产品数据手册说明书
1DS9817-13 April 2022Features●Internally Fixed Threshold 1.2V to 5V in 0.1V Step ●High Accuracy ±1.5%●Low Supply Current 3μA●No External Components Required ●Quick Reset within 20μs●Built-in Recovery Delay Include 0ms, 55ms, 220ms,450ms Options●Low Functional Supply Voltage 0.9V ●CMOS Push-Pull Output●Small SC-82 and SOT-143 Packages●RoHS Compliant and 100% Lead (Pb)-FreePin ConfigurationApplications●Computers ●Controllers●Intelligent Instruments●Critical μP and μC Power Monitoring ●Portable/Battery-Powered EquipmentMicro-Power Voltage Detectors with Manual ResetOrdering InformationGeneral DescriptionThe RT9817 is a micro-power voltage detector with deglitched manual reset input supervising the power supply voltage level for microprocessors (μP) or digital systems. It provides internally fixed threshold levels with 0.1V per step ranging from 1.2V to 5V, which covers most digital applications. It features low supply current of 3μA.The RT9817 performs supervisory function by sending out a reset signal whenever the V DD voltage falls below a preset threshold level. This reset signal will last the whole period before V DD recovering. Once V DD recovered upcrossing the threshold level, the reset signal will be released after a certain delay time. To pull reset signal low manually, just pull the manual reset input (MR) below the specified V IL level. RT9817 is provided in SC-82 and SOT-143 packages.(TOP VIEW)SOT-143Marking Information For marking information, contact our sales representative directly or through a RichTek distributor located in your area, otherwise visit our website for detail.Note :Richtek p roducts are :❝RoHS compliant and compatible with the current require- ments of IPC/JEDEC J-STD-020.❝Suitable for use in SnPb or Pb-free soldering processes.SC-82RESET/RESET MRRESET/RESET MR RT9817A = 0ms (RESET)B = 55ms (RESET)C = 220ms (RESET)D = 450ms (RESET)E = 0ms (RESET)F = 55ms (RESET)G = 220ms (RESET)H = 450ms (RESET)2DS9817-13 April 2022 Functional Block DiagramTypical Application CircuitFunctional Pin DescriptionRESET/RESETMRPart StatusThe part status values are defined as below :Active : Device is in production and is recommended for new designs. Lifebuy : The device will be discontinued, and a lifetime -buy period is in effect. NRND : Not recommended for new designs.Preview : Device has been announced but is not in production. Obsolete : Richtek has discontinued the production of the device.3DS9817-13 April 2022Absolute Maximum Ratings (Note 1)●Terminal Voltage (with Respect to GND)V DD ------------------------------------------------------------------------------------------------------------------------−0.3V to 6.0V●All Other Inputs --------------------------------------------------------------------------------------------------------−0.3V to V DD +0.3V ●Input Current, I VDD -----------------------------------------------------------------------------------------------------20mA ●Power Dissipation, PD @ T A = 25°CSC-82--------------------------------------------------------------------------------------------------------------------0.25W SOT-143-----------------------------------------------------------------------------------------------------------------0.285W ●Package Thermal Resistance (Note 2)SC-82, θJA ---------------------------------------------------------------------------------------------------------------400°C SOT-143, θJA ------------------------------------------------------------------------------------------------------------350°C ●Lead Temperature (Soldering, 10sec.)---------------------------------------------------------------------------- 260°C●Storage T emperature Range ----------------------------------------------------------------------------------------−65°C to 125°C ●ESD Susceptibility (Note 3)HBM (Human Body Mode)------------------------------------------------------------------------------------------2kV MM (Machine Mode)--------------------------------------------------------------------------------------------------200VElectrical Characteristics(V= 3V, T = 25°C, unless otherwise specified)Recommended Operating Conditions (Note 4)●Junction T emperature Range ----------------------------------------------------------------------------------------−40°C to 125°C ●Ambient T emperature Range ----------------------------------------------------------------------------------------−40°C to 85°CTo be continued4DS9817-13 April 2022Note 1. Stresses listed as the above “Absolute Maximum Ratings ” may cause permanent damage to the device. These are forstress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability.Note 2. θJA is measured in the natural convection at T A = 25°C on a low effective thermal conductivity test board ofJEDEC 51-3 thermal measurement standard.Note 3. Devices are ESD sensitive. Handling precautions are recommended.Note 4. The device is not guaranteed to function outside its operating conditions.5DS9817-13 April 2022Typical Operating CharacteristicsSupply Current vs. Input Voltage01234123456Input Voltage (V)S u p p l y C u r r e n t I D D (u A )Output Voltage vs. Input Voltage012345670123456Input Voltage (V)O u t p u t V o l t a g e (V)Nch Driver Output Current vs. V DS020*********120012345V DS (V)O u t p u t C u r r e n t(m A )Supply Current vs. Input Voltage01234560123456Input Voltage (V)S u p p l y C u r r e n t (u A )Nch Driver Output Current vs. V DS010********600.511.522.533.5V DS (V)O u t p u t C u r r e n t (m A )Nch Driver Output Current vs. V DS00.40.81.21.622.400.30.60.91.21.5V DS (V)O u t p u t C u r r e n t(m A )6DS9817-13 April 2022 Nch Driver Sink Current vs. Input Voltage0102030400.511.522.533.5Input Voltage (V)S i n k C u r r e n t I S I N K (m A )Supply Current vs. Input Voltage01234123456Input Voltage (V)S u p p l y C u r re n t (u A )Power-Down Reset Delay vs. Temperature051015202530354045-50-25255075100125Temperature P o w e r -D o w n R e s e t D e l a y (u s)(°C)Power-Down Reset Delay vs. Temperature051015202530354045-50-25255075100125Temperature P o w e r -D o w n R e s e t D e l a y (u s )(°C)Power-Down Reset Delay vs. Temperature03691215-50-25255075100125Temperature P o w e r -D o w n R e s e t D e l a y (u s )(°C)Nch Driver Sink Current vs. Input Voltage0102030405012345Input Voltage (V)S i n k C u r r e n t I S I N K (m A )7DS9817-13 April 2022Output Delay Time vs. Load Capacitance0.010.111010010000.00010.00100.01000.1000 1.0000Load Capacitance (uF)O u t p u t D e l a y T i m e (m s )Power-Up Reset Time-Out vs. Temperature0255075100-50-25255075100125Temperature P o w e r -U p R e s e t T im e -O u t (m s )(°C)Reset Threshold Deviation vs. Temperature1.002.003.004.005.006.00-50-25255075100125Temperature R e s e t T h r e s h o l d D e v i a t i on (V )(°C)Pch Driver Output Current vs. Input Voltage0510152025123456Input Voltage (V)O u t p u t C u r r e n t(m A )Nch Driver Output Current vs. V DS204060801001201401600123456V DS (V)N c h D r i v e r O u t p u t C ur r e n t (m A )Power-Up Reset Time-Out vs. Temperature0100200300400500-50-25255075100125Temperature P o w e r -U p R e s e t T i me -O u t (m s )(°C)8DS9817-13 April 2022 Nch Driver Output Current vs. Input Voltage1020304050600123456Input Voltage (V)N c h D r i v e r O u t p u t C u r r e n t (m A )Output Voltage vs. Input Voltage01234567123456Input Voltage (V)O u t p u tV o l t a g e (V )Power-Down Reset Time-Out vs. Temperature051015202530-50-25255075100125Temperature P ow e r -D o w n R e s e t T i m e -O u t (u s )(°C)Power Down Reset Time-Out vs. Temperature0100200300400500-50-25255075100125Temperature P o w e r D o w n R e s e t T i m e -O u t (m s )(°C)9DS9817-13 April 2022Application InformationBenefits of Highly Accurate Reset ThresholdMost μP supervisor ICs have reset threshold voltages between 1% and 1.5% below the value of nominal supply voltages.This ensures a reset will not occur within 1% of the nominal supply, but will occur when the supply is 1.5% below nom inal.10DS9817-13 April 2022SOT-143 Surface Mount Package11DS9817-13 April Richtek Technology CorporationHeadquarter5F, No. 20, Taiyuen Street, Chupei CityHsinchu, Taiwan, R.O.C.Tel: (8863)5526789 Fax: (8863)5526611Information that is provided by Richtek Technology Corporation is believed to be accurate and reliable. Richtek reserves the right to make any change in circuit design,specification or other related things if necessary without notice at any time. No third party intellectual property infringement of the applications should be guaranteed by users when integrating Richtek products into any application. No legal responsibility for any said applications is assumed by Richtek.Richtek Technology Corporation Taipei Office (Marketing)5F, No. 95, Minchiuan Road, Hsintien City Taipei County, Taiwan, R.O.C.Tel: (8862)86672399 Fax: (8862)86672377Email:*********************SC -82 Surface Mount Package。
din标紧固件地中文对照(1)
DIN标紧固件的中文对照序号德国标准中文译文4 DIN 1 圆锥销5 DIN 7 圆柱销6 DIN 84 开槽圆柱头螺钉7 DIN 85 开槽盘头螺钉8 DIN 93 单耳止动垫圈9 DIN 94 开口销10 DIN 95 开槽半沉头木螺钉11 DIN 96 开槽半圆头木螺钉12 DIN 97 开槽沉头木螺钉13 DIN 125-1 平垫14 DIN 125-2 平垫(带倒角)15 DIN 126 平垫16 DIN 127-1 重型弹垫17 DIN 127 标准弹垫18 DIN 128-1 波形弹垫19 DIN 137-1 弹簧止动垫圈20 DIN 137-2 鞍形弹垫21 DIN 186 T型方颈螺栓22 DIN 188 T型双接头螺栓23 DIN 258 螺纹圆锥销24 DIN 261 T型头螺栓25 DIN 315AF 蝶型螺母(美制)26 DIN 315DF 蝶型螺母(德制)27 DIN 316AF 蝶型螺钉(美制)28 DIN 317DF 蝶型螺钉(德制)29 DIN 319 圆球型盖型螺母30 DIN 404 开槽带孔球面圆柱头螺钉 DIN40531 DIN 417 开槽长圆柱端紧定螺钉32 DIN 427 开槽平端紧定螺钉(半牙)33 DIN 431 小六角特薄细牙螺母34 DIN 432 外舌止动垫圈35 DIN 433 小垫圈(用于圆柱头螺钉)36 DIN 434 方斜垫圈(U型)37 DIN 435 方斜垫圈(I型)38 DIN 436 方垫圈39 DIN 438 开槽凹端紧定螺钉40 DIN 439 六角薄螺母41 DIN 439 六角薄螺母 B级无倒角42 DIN 439 细牙六角薄螺母43 DIN 440 木螺钉专用垫圈44 DIN 443 密封帽45 DIN 444 活节螺栓B 型46 DIN 462 内舌止动垫圈47 DIN 463 双耳止动垫圈48 DIN 464 滚花高头螺钉49 DIN 465 开槽滚花高头螺钉50 DIN 466 滚花高螺母51 DIN 467 滚花薄螺母52 DIN 470 锁紧垫圈53 DIN 471 轴用弹性挡圈54 DIN 472 孔用弹性挡圈55 DIN 478 方头带垫螺栓56 DIN 479 方头圆柱底端螺栓57 DIN 480 方头带垫半圆底端螺栓58 DIN 481 弹性圆柱销59 DIN 508 T型槽螺母60 DIN 525 单头螺柱61 DIN 529 地脚螺栓62 DIN 546 带槽圆螺母63 DIN 547 端面带孔圆螺母64 DIN 551 开槽平端紧定螺钉65 DIN 553 开槽锥端紧定螺钉66 DIN 555 六角螺母67 DIN 557 方螺母-C68 DIN 558 六角头螺钉69 DIN 561 六角头圆柱端紧定螺钉70 DIN 562 薄型方螺母-B71 DIN 571 六角头木螺钉72 DIN 580 吊环螺钉73 DIN 582 吊环螺母74 DIN 601 六角头螺栓75 DIN 603 大半圆头方颈螺栓(马车螺栓) C级76 DIN 604 沉头带插销马车螺栓77 DIN 605 沉头长方颈马车螺栓78 DIN 607 半圆头带插销马车螺栓79 DIN 608 沉头短方颈马车螺栓80 DIN 609 六角头精配螺栓（长螺纹）81 DIN 610 六角头精配螺栓（短螺纹）82 DIN 653 滚花平头螺钉83 DIN 660 半圆头铆钉84 DIN 661 沉头铆钉85 DIN 662 半沉头铆钉86 DIN 674 大扁头铆钉87 DIN 703 重型侧面带孔圆螺母88 DIN 705 侧面带孔圆螺母89 DIN 741 卡头90 DIN 787 T型槽螺钉91 DIN 835 双头螺柱（牙长=2D）92 DIN 906 内六角锥型闭锁螺钉93 DIN 908 内六角直型闭锁螺钉94 DIN 909 外六角锥型闭锁螺钉95 DIN 910 外六角直型闭锁螺钉96 DIN 911 内六角扳手97 DIN 912内六角圆柱头螺钉98 DIN 913 内六角平端紧定螺钉99 DIN 914 内六角尖端紧定螺钉100 DIN 915 内六角圆柱端紧定螺钉101 DIN 916 内六角凹端紧定螺钉102 DIN 917 薄型盲螺母103 DIN 920 开槽小圆柱头螺钉104 DIN 921 开槽大圆柱头螺钉105 DIN 923 开槽圆柱头轴肩螺钉106 DIN 927 开槽无头轴肩螺钉107 DIN 928 焊接方螺母108 DIN 929 焊接六角螺母109 DIN 931 六角头螺栓（半牙）110 DIN 933 六角头螺栓（全牙）111 DIN 934 六角头螺母(1型)112 DIN 934-2 细牙六角头螺母(1型) 113 DIN 935 开槽六角螺母114 DIN 936 六角头薄螺母115 DIN 937 六角头开槽薄螺母116 DIN 938 双头螺距（牙长=1D）117 DIN 939 双头螺距（牙长=）118 DIN 939 双头螺距（牙长=）119 DIN 940 双头螺距（牙长=）120 DIN 960 六角头细牙螺栓（半牙）121 DIN 961 六角头细牙螺栓（全牙）122 DIN 962 头部穿孔六角头螺栓123 DIN 963 开槽沉头螺钉124 DIN 964 开槽半沉头螺钉125 DIN 965 十字槽沉头螺钉126 DIN 966 十字槽半沉头螺钉127 DIN 970 六角头螺母128 DIN 971 六角头螺母129 DIN 972 细牙六角头螺母(2型)130 DIN 975 牙条(全螺纹)131 DIN 976 螺纹销132 DIN 979 六角头开槽薄螺母（2型）133 DIN 980 全金属六角锁紧螺母（1型）134 DIN 981 圆螺母135 DIN 982 六角头尼龙锁紧螺母136 DIN 985 六角头薄型尼龙锁紧螺母137 DIN 986 六角盖型尼龙锁紧螺母138 DIN 988 配合垫片139 DIN 1052 木材连接用垫片140 DIN 1151 沉头钢钉141 DIN 1440 销钉专用垫片A型142 DIN 1441 销钉专用垫片143 DIN 1444 带头销钉144 DIN 1471 圆锥型槽销145 DIN 1472 圆锥型槽销(半槽)146 DIN 1473 平行槽销(带倒角)147 DIN 1474 前端凹槽槽销148 DIN 1475 中部凹槽槽销149 DIN 1476 圆头槽销150 DIN 1477 沉头槽销151 DIN 1479 六角螺母棒152 DIN 1480 花篮螺栓153 DIN 1481 弹性圆柱销开槽重型154 DIN 1587 组合式盖型螺母155 DIN 1804 开槽圆螺母（配合沟头扳手）156 DIN 1816 圆螺母（带插销孔）157 DIN 2093 盘型弹簧垫圈158 DIN 3017 喉箍159 DIN 3404 润滑油嘴（旋扭头）160 DIN 3567 管夹161 DIN 3570 U型螺栓162 DIN 5587 2型六角螺母 A和B级163 DIN 6319 球面垫圈164 DIN 6325 圆柱销165 DIN 6330 厚六角螺母166 DIN 6331 厚六角法兰面螺母167 DIN 6334 长六角螺母168 DIN 6797-A 外齿锁紧垫圈169 DIN 6797-I 内齿锁紧垫圈170 DIN 6798-A 外锯齿锁紧垫圈171 DIN 6798-I 内锯齿锁紧垫圈172 DIN 6799 开口挡圈173 DIN 6823 六角法兰面螺母174 DIN 6885 平键（A型）175 DIN 6888 半圆键176 DIN 6899 嵌环（支撑环）177 DIN 6900 机器螺钉和垫圈组合件178 DIN 6901 自攻螺钉和垫圈组合件179 DIN 6912 薄型带孔内六角圆柱头螺钉180 DIN 6914 大六角头螺栓181 DIN 6915 大六角螺母182 DIN 6916 大垫圈183 DIN 6917 楔型方垫圈184 DIN 6921 六角法兰面螺栓加大系列 B级185 DIN 6923 六角法兰面螺母186 DIN 6925 全金属六角锁紧螺母(2型）187 DIN 7337 开口型抽芯铆钉（沉头、扁圆头）188 DIN 7338 扁平头半空心/全空心铆钉189 DIN 7343 螺旋夹紧销190 DIN 7346 轻型弹性圆柱销191 DIN 7349 重型弹性圆柱销用垫圈192 DIN 7500 ISO公制螺纹螺钉(多种头型)193 DIN 7504 自攻自钻螺钉(多种头型)194 DIN 7513 开槽切削螺纹螺钉(多种头型) 195 DIN 7516 十字槽切削螺纹螺钉(多种头型) 196 DIN 7965 T型四爪螺母197 DIN 7968 钢结构用六角头螺栓连接副198 DIN 7971 开槽盘头自攻螺钉199 DIN 7972 开槽沉头自攻螺钉200 DIN 7973 开槽半沉头自攻螺钉201 DIN 7976 六角头自攻螺钉202 DIN 7978 圆锥销203 DIN 7980 圆柱头螺钉用弹簧垫圈204 DIN 7981 十字槽盘头自攻螺钉205 DIN 7982 十字槽沉头自攻螺钉206 DIN 7983 十字槽半沉头自攻螺钉207 DIN 7984 薄型内六角圆柱头螺钉208 DIN 7985 十字槽盘头螺钉209 DIN 7989 钢结构用垫圈210 DIN 7990 钢结构用六角头螺栓211 DIN 7991 内六角沉头螺钉212 DIN 7993 轴用钢丝挡圈213 DIN 7995 十字槽半沉头木螺钉214 DIN 7996 十字槽圆头木螺钉215 DIN 7997 十字槽沉头木螺钉216 DIN 8140 螺纹护套（普通\自锁等）217 DIN 9021 大外径垫圈218 DIN 11024 弹簧卡子219 DIN 13257 平板螺栓220 DIN 18182 干壁钉（墙板钉）221 DIN 28129 环型螺母222 DIN 70952 圆螺母用止退垫圈螺丝，紧固件，标准件词汇的中英文对照机(踏)车用螺丝、轴心 Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心 Screws And Shafts For Sewing Maching止付螺丝 Socket Set Screws不锈钢宽牙螺丝 Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝 Stainless Steel High-Low Thread Screws不锈钢机械螺丝 Stainless Steel Machine Screws不锈钢钻尾螺丝 Stainless Steel Self Drilling Screws不锈钢自攻螺丝 Stainless Steel Self Tapping Screws不锈钢自削螺丝 Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝 Stainless Steel Tri-Lobular Thread Screws插片壁虎 Steel Ceiling Anchors内迫壁虎 Drop in Anchors碳钢锤钉壁虎 Steel Hit Anchors碳钢六角螺帽 Steel Hex Coupling Nuts强力车修壁虎 Wedge Anchors外迫壁虎 Cut Anchors化学壁虎 Chemical Anchors不锈钢重载胀栓 Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽 Tie Wire Anchors锌合金打入式壁虎 Hammer Drive Anchors弹簧螺帽 Strut Nuts兰花夹系列 Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎 Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎 Hollow Wall Anchors套管式壁虎 Sleeve Anchors打入式壁虎鱼形尼龙壁虎 Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎 Hit Anchors电梯壁虎 Bolt Anchors重载壁虎 Heavy duty anchors两片夹 Loxin Masonry Anchors定位螺栓 Set Bolts长型兰花夹 Short Strap Anchors工具棒 Drop in Setting Tools象脚壁虎 Elephant foot anchors水泥预埋件 Concrete Insert翻边胀轴 Drop in Anchor with Lip冲件 Legs Drywall Anchors六角盖头螺帽 Hex Cap Nuts六角锯齿螺帽 Hex Serrated Nuts六角轮缘螺帽 Hex Flange Nuts高脚螺帽 Hex Coupling Nuts(High Nuts)圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU形螺帽 U NutsT形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts 焊接螺帽 Weld Nuts高张力螺帽 Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽 Heavy Duty Wheel Hub Nuts铁器焊接袋帽 Acorn Cap Nuts金属预置扭矩式螺帽 All-Metal Prevailing Torque Type Nuts壁虎螺帽 Anchor Nuts大尺寸螺帽 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺帽 Conical Washer Nuts铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts突缘尼龙盖帽 Flange Nylon Insert Lock Nuts平面华司螺帽 Flat Waser Nuts六角割沟螺帽 Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽 Sln Self-Locking Nuts其它特殊螺帽 Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽 Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽 Stainless Steel Heavy Hex Nuts不锈钢六角螺帽 Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽 Stainless Steel Nylon Insert Lock Nuts普通六角螺帽 Hex Nuts六角重型螺帽 Heavy Hex Nuts薄型螺帽 Hex Jam Nuts尼龙嵌入防松螺帽 Nylon Insert Lock Nuts机械螺丝用六角螺帽 Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝 Hex Head Machine Bolts六角木牙螺丝 Hex Lag Bolts四角螺丝 Square Head BoltsT头螺丝 T Head Bolts马车螺丝 Carriage Bolts环首螺丝 Eye Bolts内六角孔螺丝 Hex Socket Cap Screws固定螺丝 Set Screws螺椿栓 Stud Bolts螺旋椿 Screw Studs轮壳螺栓 Wheel Bolts翼形螺丝 Wing Screws自攻螺丝 Self Tapping Screws自削螺丝 Thread Cutting Screws钻尾螺丝 Self Drilling Screws旋入螺丝 Drive Screws机械螺丝 Machine Screws木螺丝 Wood Screws家具螺丝 Furniture Screws塑板螺丝 Chipboard Screws墙用螺丝 Drywall Screws基础螺栓 Foundation BoltsU型螺栓 U Bolts勾头螺栓 Hook Bolts套挂螺丝 Toggle Bolts突缘螺丝 Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝 Corten Steel Heavy Hex Bolts扭矩控制螺栓高张力螺栓 High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合 Screws And Washers Assembled(Sems) 大尺寸螺栓 Big Size Bolts不锈钢小螺丝 Stainless Steel Sheet Metal Screws 不锈钢大螺丝 Stainless Steel Bolts铜螺丝 Brass Screws铝螺丝 Aluminum Screws合金钢螺丝 Alloy Steel Screws电子螺丝 Electronic Screws微小精密螺丝 Micro Screws塑料螺丝 Plastic Screws复合材料用螺丝 Particle Board Screws钛合金螺丝 Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料 Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝 Thumb Screws双头牙螺丝 Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽 Automotive Fasteners航天用螺丝 Aerospace Fasteners飞机特殊扣件 Source Control Bolts拉栓 Blind Bolts面板螺丝 Panel Fasteners电梯螺丝 Elevator Bolts四角头固定螺丝 Square Set Screws大头马车螺丝 Step Bolts单向螺丝 One Way Lag Screws管夹螺丝 Hose Clamp Screws不锈钢固定螺丝 Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝 Stainless Steel Hex Socket Cap Screws铰链螺丝 Hinge Screws货柜螺丝 Container Screws复合材料钻尾螺丝 Bi-Metal Self Drilling Screws三角牙螺丝 Trilobular Thread Screws高低牙螺丝 High Low Screws夹板用螺丝 Particle Board Screws马桶螺丝 Toilet Closet Bolts特长螺丝 Special Longer Screws建业螺丝 Building Fasteners不锈钢六角螺丝 Stainless Steel Hex Socket Cap Screws其它特殊螺丝 Special Screws Or Bolts不锈钢特殊螺丝 Special Stainless Steel Screws宽牙螺丝（粗牙螺丝） Coarse Thread Screws链带螺丝 Collated Screws水泥螺丝 Concrete Screws板模螺丝 Construction Bolts锌蝶螺丝 Die Cast Wing Screws; Zinc Alloy重型车螺丝 Heavy Duty Wheel Hub Bolts内六角固定螺丝 Hex Socket Set Screws复合材料用螺丝（夹板用） Particle Board Screws犁壁螺丝 Plow Bolts不锈钢木螺丝 Stainless Steel Wood Screws套挂螺栓及螺丝 Toggle Bolts钛合金膨胀螺丝 Titanium Alloy Expansion Bolts六角盖头螺帽 Hex Cap Nuts六角锯齿螺帽 Hex Serrated Nuts六角轮缘螺帽 Hex Flange Nuts高脚螺帽 Hex Coupling Nuts(High Nuts)圆螺帽 Round Nuts四角螺帽 Square Nuts管用螺帽 Pipe Nuts轮壳螺帽 Wheel Nuts蝶型螺帽 Wing NutsU形螺帽 U NutsT形螺帽 T Nuts环首螺帽 Eye Nuts齿形螺帽 Kep Nuts齿花螺帽 Clinch Nuts耐候钢六角重型螺帽 Corten Steel Heavy Hex Nuts焊接螺帽 Weld Nuts高张力螺帽 Heigh Strength Nuts建业用螺帽 Structural Nuts不锈钢螺帽 Stainless Steel Nuts铜螺帽 Brass Nuts铝螺帽 Aluminum Nuts合金钢螺帽 Alloy Steel Nuts重型车螺帽 Heavy Duty Wheel Hub Nuts铁器焊接袋帽 Acorn Cap Nuts金属预置扭矩式螺帽 All-Metal Prevailing Torque Type Nuts壁虎螺帽 Anchor Nuts大尺寸螺帽 Big Size Nuts铁盖袋帽 Closed End Acorn Nuts盘形华司螺帽 Conical Washer Nuts铁盖+尼龙圈组合盖帽 Din 986 Domed Cap Nuts突缘尼龙盖帽 Flange Nylon Insert Lock Nuts平面华司螺帽 Flat Waser Nuts六角割沟螺帽 Hex Slotted Nut自锁螺帽 Self-Locking Nuts制止螺帽 Sliding NutsSln-自动防松螺帽 Sln Self-Locking Nuts其它特殊螺帽 Special Nuts弹簧螺帽 Spring Nuts不锈钢突缘螺帽 Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽 Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽 Stainless Steel Heavy Hex Nuts不锈钢六角螺帽 Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽 Stainless Steel Nylon Insert Lock Nuts锌压属螺帽 Zinc Die Casting Nuts普通六角螺帽 Hex Nuts六角重型螺帽 Heavy Hex Nuts薄型螺帽 Hex Jam Nuts尼龙嵌入防松螺帽 Nylon Insert Lock Nuts机械螺丝用六角螺帽 Hex Machine Screw Nut合金钢线材盘元 Alloy Steel Wire Rod球状化线材 Annealing Wire And Rod黑铁丝 Black Wire黄铜棒线 Brass Wire And Rod磨光棒钢 Bright Steel Bar(Hex/Round/Square)铜合金线 Copper Alloy Wire线切割线 Cutting Wire快削钢线材盘元 Free Cutting Steel Wire Rod线材 Iron Or Steel Wire线材盘元 Iron Or Steel Wire Rod洋白铜线 Nickel Silver Wire磷青铜线 Phosphate Bronze Wire不锈钢条棒 Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材 Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材 Stainless Steel Wire不锈钢线材及盘元 Stainless Steel Wire And Rod棒钢 Steel Bar(Hex/Round/Square)转回90度碾线头机 90讧evolving Wire Twisting Machine气动拉钉机 Air Riveter各式螺丝类产品自动包装 Automatic Packaging For All Kinds Of Packaging 自动包装机 Automatic Packing Machine螺丝制造搓牙机械 Automatic Thread Rolling Machine螺丝割尾加工机械 Automatic Thread Slotting Machine螺丝制造成型机械 Automatic Trimming Machine拉钉打头机 Blind Rivet Heading Machine螺丝、螺帽成型机 Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理 Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉 Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉 Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜 Ceramic Coating连续式光辉渗碳淬火炉 Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉 Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉 Continuous Bright Heat Treat Furnace连续式光辉热处理炉 Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工 Machine Screw Shank Slotting螺丝钻孔加工 Screw Shank Drilling鸡眼上下模 Eyelets Dies一般线材、盘元、退火炉 General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机 Handstand Type Wire Drawing Machine十字冲模 Header Punches In Various Drives成型冲模 Header Punches In Various Drives螺丝打头机 Heading Machine螺丝制造高速搓牙机械 High Speed Automatic Thread Rolling Machine高中低周波感应加热炉 High,Medium,Low Frequency Induction Heater空心打头机 Hollow Heading Machine热浸镀锌螺丝、螺帽 Hot Dip Galvanizing Bolts And Nuts机械镀锌 Mechanical Galvanized迷你成型机 Mini-Formers成品自动收线机 Non-Stop Coiler精抽自动收线机 Non-Stop Coiler(Skinpass)螺帽模 Nut Forming Dies螺帽成型模 Nuts Formers特殊零件成型机 Parts Forming Maching冲模 Punch Dies冲子 Punch Pins罗拉成型机 Rollers Formers机(踏)车用螺丝成型机 Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机 Set Screws Formers套高成型机 Sockets Formers一般线材、盘元、螺丝合金炖炉 Spheroidizing Bright Annealing Furnace球状化热处理炉 Spheroidizing Heat Treatment Furnace攻牙机 Tapping Machine螺丝攻、车刀、模具 Taps Dies And Tools搓牙机铁屑分离装置 Thread Chip Separator滚牙轮 Thread Rolling Dies牙板 Thread Rolling Dies Plates精密油压滚牙机 Hydraulic Thread Rolling Machines模具 Tools六角整头模 Trimming Dies Hexagan碳化钨模具 Tungsten Carbide Die镀钛处理(Tin)专业加工服务 Tin Hard Coating For Cutting Tools And Punch By Pvd 电镀化学原料 Various Electroplating Chemicals环规校正 Calibration For Ring Gage环规、牙规、三线规校正 Calibration For Ring Gage, Athread Gage, 3 Wire Gage 螺丝、螺帽品检量测仪器 Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油 Forming And Tapping Oils For Bolts And Nuts Formers 螺丝、螺帽五金等检验 Insptection Services For Fasteners And Hardware德国schatz扭力机代理 Representative Of Schatz Torque MachinIso品质保证系统 Iso Quality Assurance System生产管理系统 Production Control System物料管理系统 Material Control System齿轮 Gears不锈钢牙条棒 Stainless Steel Hread Rod马达轴承轴心组件 Bearing Shaft(Motor)轴承轴心 Bearing Shaft开口铆钉 Blind Rivets长形拉帽 Blind Rivet Nuts拉帽 Blind Nuts拉钉 Blind Rivets实心梢 Clevis Pins And Straight Pins弹片 Clips卷钉 Coil Nails冷锻零件 Cold Forming Part开口销 Cotter PinsE型环 E-Rings膨胀螺栓 Expansion Anchor Bolts鸡眼钉 Eyelets RivetsR型销 Snap Pins闸、锁 Latches And Keeper Assembleds其它特殊铆钉 Other Specil Rivets销 Pins格式管夹、管束 Pipe Hanger铆钉 Rivets螺旋锔及螺旋圈 Screw Hook And Screw Rings 中空钉 Semi-Tubular Rivet开叉钉 Split Drive Anchors弹簧华司 Spring Washers弹簧蝴蝶夹 Spring Wings不锈钢华司 Stainlesssteel Washers钢铁钉 Steel And Iron Nails搓牙铁钉 Thread Nails钛合金铆钉 Titaium Alloy Rivets管形铆钉 Tubular Rivets华司 Washers真空热处理 Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件 Fasteners合金钢工具 Alloy Steel Tools螺栓模 Bolt Heading Dies手动拉钉钳 Hand Riveter船舶链 Anchor Chain脚踏车链锁 Bicycle Chain Locks螺丝起子 Bit罗拉 Chain Roller特殊铆合扣件 Collars(A Blindfastener For Huck Intl)装饰链 Decorative Chains自攻螺纹衬套 Ensat Threaded Inserts六角扳手 Hexagon Keys超音螺纹压入式螺纹自动锁扣 Threaded Inserts For Plastic Injection Mouldeings 汽车特殊杆接件 Special Auto-Mobile Fastener As Your Needs螺纹护套 Recoil Inserts链条用滚子 Roller For Roller Chain金属板镶嵌组件及自动夹扣组件 Sheet Metal Fasteners工具套筒组件 Socket Wrench Sets不锈钢链 Stainless Steel Chains轭子 T-Yoke轮胎链 Tire Chains狗链 Dog Chains喇叭头轭铁 U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道 Stainless Wheel's Rack For Transporter工业用链 Industrial Steel Link Chains拖链安全链 Tow Chains And Safety Chains机车离合器零件 Manufacture Of Motorcycle's Cvt Parts牙条棒 Thread Rod。
德标对应
Package2 100 DIN standards white - yellowPackage 3 125 DIN standards white - yellow -bluePackage 4 150 DIN standards white - yellow -blue -pinkDIN standarts DescriptionDIN 13-12ISO-Metric Screw Threads general plan of screw threads according to ISO 261 DIN 74Countersinks for countersunk head screws - type A, E and FDIN 76-1Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN13-1DIN 76-2Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN13-1DIN 128Curved spring lock washer type ADIN 315Wing nuts, rounded wingsDIN 316Wing screws, rounded wingsDIN 332-160° centre holes, types R, A, B, and CDIN 434Square taper washers for U-sectionsDIN 435Square taper washers for I-sectionsDIN 444Eye boltsDIN 471Circlips (retaining rings) for shafts (ring)DIN 471Circlips (retaining rings) for shafts (groove)DIN 472Circlips (retaining rings) for bores (ring)DIN 472Circlips (retaining rings) for bores (groove)DIN 509Relief grooves - Types and dimensionsDIN 561Hexagon head set screws with small hexagon and dog pointDIN 580Eye boltsDIN 582Eye nutsDIN 603Mushroom head square neck boltsDIN 609Hexagon fits bolts with long threadDIN 617Needle roller bearings with cage; dimension series 48 and 49DIN 625-1Radial deep groove ball bearings, single rowDIN 625-3Radial deep groove ball bearings, double rowDIN 628-1Angular contact radial ball bearings, single rowDIN 628-3Angular contact ball bearings, double row, with cageDIN 630Self aligning ball bearings, double row with cylindrical and tapered boreDIN 635-2Spherical roller bearings, double rowDIN 705Adjusting ringsDIN 711Single direction thrust ball bearingsDIN 715Double direction thrust ball bearingsDIN 720Tapered roller bearingsDIN 722Single direction thrust cylindrical roller bearingsDIN 728Single direction self-aligning thrust bearings with asymmetric rollersDIN 835Studs - Metal end approx. 2 dDIN 906Hexagon socket pipe plugsDIN 908Hexagon socket screw plugs with parallel screw threadDIN 910Hexagon - duty hexagon head screw plugsDIN 935-1Hexagon slotted and castle nuts - Metric coarse and fine pitch thread;Product grades A and BDIN 938Studs - Metal End approx. 1 dDIN 939Studs - Metal End approx. 1.25 dDIN 940Studs - Metal End approx. 2.5DIN 974-1Diameters of counterbores for hexagon socket head cup screwsDIN 974-2Diameters of counterbores for hexagon bolts, screws and nutsDIN 981Rolling bearings; locknutsDIN 988Shim rings and supporting ringsDIN 1025-1Hot rolled I-beams - Narrow flange I-beams, I-serieDIN 1025-2Hot rolled I-beams - Narrow flange I-beams, IPB-seriePackage2 100 DIN standards white - yellowPackage 3 125 DIN standards white - yellow -bluePackage 4 150 DIN standards white - yellow -blue -pinkDIN standarts DescriptionDIN 1025-3Hot rolled I-beams; wide flange Ibeams,light pattern, IPBl-serieDIN 1025-4Hot rolled I-beams; wide flange Ibeams heavy pattern, IPBv-serieDIN 1025-5Hot rolled I-beams; medium flange Ibeams, IPE-serieDIN 1026-1Hot rolled steel channels; Taper flange steel channelsDIN 1026-2Hot rolled steel channels; paralell flange steel channelsDIN 1027Steel bars - Hot-rolled zees with round edgesDIN 1587Hexagon domed cap nuts, high typeDIN 1804Slotted Round Nut for Hook Spanner; ISO Metric Fine ThreadDIN 2098-1Helical springs Made of Round WireDIN 2093Disc springs; dimensions and quality specificationsDIN 2448Seamless PipesDIN 2458Welded PipesDIN 2527Blind Flange; Nominal Pressure 6 to 100DIN 2605-1Elbows and bends with reduced pressure factorDIN 2605-2Elbows - Full correlation of utilizationDIN 2615-1Tees with reduced pressure factorDIN 2615-2Tees for use at full service pressureDIN 2616-1Eccentric reducers with reduced pressure factorDIN 2616-2Reducers for use at full service pressureDIN 2617CupsDIN 2631Welding Neck Flanges; Nominal Pressure 6DIN 2632Welding Neck Flanges; Nominal Pressure 10DIN 2633Welding Neck Flanges; Nominal Pressure 16DIN 2634Welding Neck Flanges; Nominal Pressure 25DIN 2635Welding Neck Flanges; Nominal Pressure 40DIN 2636Welding Neck Flanges; Nominal Pressure 64DIN 2637Welding Neck Flanges; Nominal Pressure 100DIN 2638Welding Neck Flanges; Nominal Pressure 160DIN 2999Withworth pipe thread for threated pipes and fittings, parallel internal threadDIN 3760Rotary shaft lip type sealsDIN 5406Rolling bearings; lockwashers; safety plate, lockclipDIN 5412-1Cylindrical roller bearings, singel row, with cageDIN 5412-4Cylindrical roller bearings, double row, with cage, increased accuracyDIN 5415Rolling bearings; adapter sleevesDIN 6321Support and location pinsDIN 6331Hexagon collar nuts with a height of 1,5 dDIN 6796Conical spring washers for bolt/nut assembliesDIN 6797Toothed locked washersDIN 6798Serrated lock washersDIN 6885-1Parallel Keys, Keyways, Deep PatterDIN 6885-2Parallel Keys, Keyways, Deep Pattern for Machine ToolsDIN 6885-3Parallel Keys, Shallow PatternDIN 6912Hexagon socket head cap screws with centre, with low headDIN 6917Square taper washers for high-strength structural bolting of steel IDIN 6918Square taper washers for high-strength structual bolting of steel channel sections DIN 7984Hexagon socket head cap screws with low headDIN 28011Torispherical headsDIN ISO 261ISO general purpose metric screw threadsDIN ISO1481Slotted pan head tapping screwsDIN EN 10055Hot rolled steel equal flange tees with radiused root and toesPackage2 100 DIN standards white - yellowPackage 3 125 DIN standards white - yellow -bluePackage 4 150 DIN standards white - yellow -blue -pinkDIN standarts DescriptionDIN EN 10056-1Structural steel equal leg anglesDIN EN 10056-1Structural steel unqual leg anglesDIN EN 10210-2Hot finished structural hollow sectionsDIN EN 10219-2Cold formed welded structural hollow sectionsDIN EN 10241 Steel threaded pipeDIN EN 14399-4Hexagon bolt - High-strength structural bolting assemblies for preloadingDIN EN 14399-4Hexagon nut - High-strength structural bolting assemblies for preloadingDIN EN 14399-5Plain washers - High-strength structural bolting assemblies for preloadingDIN EN 14399-6Plain chamfered washers - High-strength structural bolting assemblies for preloading DIN EN 20273Fasteners, clearance holes for bolts and screwsDIN EN 22339Unhardened taper pinsDIN EN 22340Clevis pins without headDIN EN 22341Clevis pins with headDIN EN 24766Slotted set screws with flat pointDIN EN 27434Slotted set screws with cone pointDIN EN 27435Slotted set screws with long dog pointDIN EN 28738 Plain washers for clevis pins; product grade ADIN EN ISOPipe thread where pressure-tight joints are not made on the threads228-1DIN EN ISO 1207Slotted cheese head screws - Product grade ADIN EN ISO 1234Split pinsDIN EN ISO 1580Slotted pan head screws - Product grade ADIN EN ISO 2009Slotted countersunk flat head screws (common head style) - Product grade ADIN EN ISO 2010Slotted raised countersunk head screws (common head style) - Product grade A DIN EN ISO 2338Parallel pins of unhardened steel and austenitic stainless steelDIN EN ISO 4014Hexagon head bolts - Product grades A and BDIN EN ISO 4016Hexagon head bolts - Product grade CDIN EN ISO 4017Hexagon head screws - Product grades A and BDIN EN ISO 4026Hexagon socket set screws with flat pointDIN EN ISO 4027Hexagon socket set screws with cone pointDIN EN ISO 4028Hexagon socket set screws with dog pointDIN EN ISO 4029Hexagon socket set screws with cup pointDIN EN ISO 4032Hexagon nuts, style 1 - Product grades A and BDIN EN ISO 4034Hexagon nuts - Product grade CDIN EN ISO 4035Hexagon thin nuts (chamfered) - Product grades A and BDIN EN ISO 4036Hexagon thin nuts (unchamfered) - Product grade BDIN EN ISO 4762Hexagon socket head cap screwsDIN EN ISO 7040Prevailing torque type hexagon nuts (with non-metallic insert), style 1DIN EN ISO 7042Prevailing torque type (all-metal hexagon nuts), style 2DIN EN ISO 7045Pan head screws with type H or type Z cross recess - Product grade ADIN EN ISO 7089Plain washers - Normal series, Product grade ADIN EN ISO 7090Plain washers, chamfered - Normal series, Product grade ADIN EN ISO 7091Plain washers - Normal series, Product grade CDIN EN ISO 7092Plain washers - Small series, Product grade ADIN EN ISO 8676Hexagon head screws with metric fine pitch thread – Product grades A and BDIN EN ISO 8733Parallel pins with internal thread, of unhardened and austenitic stainless steelDIN EN ISO 8734Parallel pins of hardened and martensitic stainless steel (Dowel pins)DIN EN ISO 8740Grooved pins - Full-length parallel grooved, with chamferDIN EN ISO 8744Grooved pins - Full-length taper groovedPackage2 100 DIN standards white - yellowPackage 3 125 DIN standards white - yellow -bluePackage 4 150 DIN standards white - yellow -blue -pinkDIN standarts DescriptionDIN EN ISO 8745Grooved pins - Half-length taper groovedDIN EN ISO 8752Spring-type straight pins - Slotted, heavy dutyDIN EN ISO 8765Hexagon head bolts with metric fine pitch thread – Product grades A and BPrevailing torque type hexagon, thin nuts (with non-metallic insert)DIN EN ISO10511Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine DIN EN ISO10512Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread DIN EN ISO10513Hexagon socket countersunk head screwsDIN EN ISO10642。
Nord-Lock防松垫片中文产品手册-2017
5
使用洛帝牢 防松垫圈
洛帝牢防松垫圈在使用的时候很容易，也很高 效，因为你只用确认我们的锁紧系统是否满足你 的震动和承受的力学载荷。
安装垫圈 安装的时候，都是使用一对，而且是齿面对齿 面，可能的话洛帝牢推荐使用润滑油。
紧固 拧紧洛帝牢防松垫圈的时候，请使用标准的工 具，数据参考9-11页。如果你需要其他级别螺栓 的安装数据，请联系洛帝牢的相关代表。
拧松 拧开洛帝牢系统和拧紧时一样简单，需要注意的 是，既然洛帝牢防松垫圈不是靠增大摩擦来锁紧， 所以拧松的扭矩应该低于拧紧时候的扭矩。因此 通过测量松开扭矩来鉴定锁紧功能是不合理的。
重复使用洛帝牢防松垫圈 洛帝牢防松垫圈通常可以重复利用，和所有的紧 固件一样，在安装之前，我们应该检测是否有损 坏。确保在重复安装的时候，两个齿面是相对 的。为了减少摩擦，洛帝牢建议在重复使用时， 使用润滑剂。
洛帝牢：楔入锁紧方法
洛帝牢防松垫圈不是利用摩擦力而是利用机械 结构锁紧。它是由一对有相互咬合的齿面的垫 圈构成。相互咬合的角度‘α’大于螺纹的升 角‘b’，这样就有效地阻止螺丝的松动。
洛帝牢楔入锁紧产品是你的螺栓紧固锁紧高要求的 理想选择。 2
多年以来，洛帝牢防松垫圈已经过严格的测试，被各种独立机构认可并授予证书。
震动测试仪的震动测试 震动测试满足DIN65151，这种测试是被誉为最严格 的螺栓连接的震动测试。在此测试过程中，螺栓头 部/螺母下面部分被施以横向振动，同时持续测量其 夹紧力。
震动测试
M8X25mm的螺栓(8.8级)
拆卸
符合NASM冲击和震动测试 根据NASM 1312-7进行的国家航空测试，是一种源 于美国军方的测试方法，用以测试螺栓连接件抗冲击 和振动的能力。
PREN耐点蚀当量为27** PREN耐点蚀当量为45** PREN耐点蚀当量为68** PREN耐点蚀当量为29**
希捷 Backup Plus 便携式硬盘 1TB 使用手册说明书
标准件中德对照要[1]
![标准件中德对照要[1]](https://img.taocdn.com/s3/m/f89c0be0f8c75fbfc77db28a.png)
Checked plate
冷拔异形钢管-方形矩形
GB/T 3094-2000
Hollow section
DINEN10210
13900
型材
方形矩形型钢(空心-热轧
GB/T 6728-1986
Hollow section
EN 10025 (EN 10210)
14200壁厚<10mm
万向传动轴
SWC－Ⅰ150－340
张Байду номын сангаас辊
管夹
JB/ZQ4008-1997
35
非标
s-hook
WN 2336(WS2336)
插销
非标
Spring plug(cottres)
DIN 11024
20800 352
带式铰链
非标
Strap hinge
DIN 31211
13900 606
吊耳
JB/ZQ 4628-1997
trunnion
WN 2900
拉环
非标
Suspension link
GB/T802-1988
UNI 5721
环形螺母
ZCuZn40Mn2
GB/T63-1988
Lifting nut
DIN 28129
螺母
ISO4033
垫圈
垫圈(平垫圈)A级
200HV
GB/T 97.1-1985
Washer
DIN 125-1,ISO7089
DIN 125-1
Conical spring washer
螺母
8级
GB/T 6180-1986
Castle nut
DIN 981
Normen-Ticker/kompakt - Yale Industrial Products GmbH - Kd.-Nr. 01807138 - Abo-Nr. 00139229/001/001 - 2010-08-25
2
DIN 981:2009-06
Vorwort
Diese Norm wurde vom Normenausschuss Wälz- und Gleitlager, Arbeitsausschuss NA 118-01-02 AA „Kugellager und Spannlager einschließlich Teile, allgemeines Wälzlagerzubehör und Gehäuse“, erarbeitet. Änderungen Gegenüber DIN 981:1993-02 wurden folgende Änderungen vorgenommen: a) Norm vollständig überarbeitet; b) Anpassung der Seitenschlagtoleranzen (S1 bzw. S2) an ISO 2982-2; c) Symbole weitgehend an ISO 2982-2 angepasst; d) Tabelle 1, Maßangabe h durch A ersetzt für Muttern bis M 100 × 2; e) HM . . . . T – Ausführung von Tabelle 2 in Tabelle 1 übertragen analog ISO 2982-2; f) weitere Angaben zur Ausführung hinzugefügt; g) Gewichtsangaben in den Tabellen 1 und 2 gestrichen; h) normative Verweisungen aktualisiert. Frühere Ausgaben DIN 981: 1973-01, 1977-05, 1983-01, 1993-02
DIN-ISO-GB标准件对照表
国际标准 ISO-Standard
ISO2339 ISO2339 ISO1207 ISO1580
ISO1234
ISO7089 ISO7090 ISO7091
中国标准 GB/T-Standard GB/T117-2000 GB/T119-2000 GB/T65-2000 GB/T67-2000 GB/T854-1988 GB/T91-2000 GB/T101-1986 GB/T99-1986 GB/T100-1986 GB/T97.1-2002 GB/T97.2-2002
DIN-ISO-GB标准件对照表
序号 德国标准 Item DIN-Standard
中文品名 Description in Chinese
英文品名 Desciption in English
1 DIN1 2 DIN7 3 DIN84 4 DIN85 5 DIN93 6 DIN94 7 DIN95 8 DIN96 9 DIN97 10 DIN125-A 11 DIN125-B 12 DIN126 13 DIN127-A 14 DIN127-B 15 DIN128-A 16 DIN137-A 17 DIN137-B 18 DIN186 19 DIN188 20 DIN258 21 DIN261 22 DIN315AF 23 DIN315DF 24 DIN316AF 25 DIN317DF 26 DIN319 27 DIN404 28 DIN417 29 DIN427 30 DIN431 31 DIN432 32 DIN433 33 DIN434 34 DIN435
方垫圈
Square washer
开槽凹端紧定螺钉
Slotted set with cup point
六角薄螺母
飞船发动机FZ91用户手册说明书
Do not attempt to start at full throttle, as this is very dangerous.
BREAK-IN
To maximize engine performance and increase durability, please follow this break-in procedure:
2. Always uses a fuel filter. We recommend the YS filter.
3. Match the direction of the check valve arrow to fig.1, with the arrow facing towards the tank.
2. When the engine is started, open the throttle gradually. Next, find the peak position(highest RPM) by adjusting the needle valve. Then the needle valve should be opened approximately 1/8 of a turn from full RPM to achieve best performance. The engine may stop if the throttle is opened to full immediately after starting. Wait unit the engine temperature rises and then open the throttle slowly.
Fuel Filter(YS1195/not included)
DIN标紧固件地中文对照
DIN标紧固件的中文对照序号德国标准中文译文4 DIN 1 圆锥销5 DIN 7 圆柱销6 DIN 84 开槽圆柱头螺钉7 DIN 85 开槽盘头螺钉8 DIN 93 单耳止动垫圈9 DIN 94 开口销10 DIN 95 开槽半沉头木螺钉11 DIN 96 开槽半圆头木螺钉12 DIN 97 开槽沉头木螺钉13 DIN 125-1 平垫14 DIN 125-2 平垫(带倒角)15 DIN 126 平垫16 DIN 127-1 重型弹垫17 DIN 127 标准弹垫18 DIN 128-1 波形弹垫19 DIN 137-1 弹簧止动垫圈20 DIN 137-2 鞍形弹垫21 DIN 186 T型方颈螺栓22 DIN 188 T型双接头螺栓23 DIN 258 螺纹圆锥销24 DIN 261 T型头螺栓25 DIN 315AF 蝶型螺母(美制)26 DIN 315DF 蝶型螺母(德制)27 DIN 316AF 蝶型螺钉(美制)28 DIN 317DF 蝶型螺钉(德制)29 DIN 319 圆球型盖型螺母30 DIN 404 开槽带孔球面圆柱头螺钉DIN40531 DIN 417 开槽长圆柱端紧定螺钉32 DIN 427 开槽平端紧定螺钉(半牙)33 DIN 431 小六角特薄细牙螺母34 DIN 432 外舌止动垫圈35 DIN 433 小垫圈(用于圆柱头螺钉)36 DIN 434 方斜垫圈(U型)37 DIN 435 方斜垫圈(I型)38 DIN 436 方垫圈39 DIN 438 开槽凹端紧定螺钉40 DIN 439 六角薄螺母41 DIN 439 六角薄螺母B级无倒角42 DIN 439 细牙六角薄螺母43 DIN 440 木螺钉专用垫圈44 DIN 443 密封帽45 DIN 444 活节螺栓B 型46 DIN 462 内舌止动垫圈47 DIN 463 双耳止动垫圈48 DIN 464 滚花高头螺钉49 DIN 465 开槽滚花高头螺钉50 DIN 466 滚花高螺母51 DIN 467 滚花薄螺母52 DIN 470 锁紧垫圈53 DIN 471 轴用弹性挡圈54 DIN 472 孔用弹性挡圈55 DIN 478 方头带垫螺栓56 DIN 479 方头圆柱底端螺栓57 DIN 480 方头带垫半圆底端螺栓58 DIN 481 弹性圆柱销59 DIN 508 T型槽螺母60 DIN 525 单头螺柱61 DIN 529 地脚螺栓62 DIN 546 带槽圆螺母63 DIN 547 端面带孔圆螺母64 DIN 551 开槽平端紧定螺钉65 DIN 553 开槽锥端紧定螺钉66 DIN 555 六角螺母67 DIN 557 方螺母-C68 DIN 558 六角头螺钉69 DIN 561 六角头圆柱端紧定螺钉70 DIN 562 薄型方螺母-B71 DIN 571 六角头木螺钉72 DIN 580 吊环螺钉73 DIN 582 吊环螺母74 DIN 601 六角头螺栓75 DIN 603 大半圆头方颈螺栓(马车螺栓) C级76 DIN 604 沉头带插销马车螺栓77 DIN 605 沉头长方颈马车螺栓78 DIN 607 半圆头带插销马车螺栓79 DIN 608 沉头短方颈马车螺栓80 DIN 609 六角头精配螺栓（长螺纹）81 DIN 610 六角头精配螺栓（短螺纹）82 DIN 653 滚花平头螺钉83 DIN 660 半圆头铆钉84 DIN 661 沉头铆钉85 DIN 662 半沉头铆钉86 DIN 674 大扁头铆钉87 DIN 703 重型侧面带孔圆螺母88 DIN 705 侧面带孔圆螺母89 DIN 741 卡头90 DIN 787 T型槽螺钉91 DIN 835 双头螺柱（牙长=2D）92 DIN 906 内六角锥型闭锁螺钉93 DIN 908 内六角直型闭锁螺钉94 DIN 909 外六角锥型闭锁螺钉95 DIN 910 外六角直型闭锁螺钉96 DIN 911 内六角扳手97 DIN 912内六角圆柱头螺钉98 DIN 913 内六角平端紧定螺钉99 DIN 914 内六角尖端紧定螺钉100 DIN 915 内六角圆柱端紧定螺钉101 DIN 916 内六角凹端紧定螺钉102 DIN 917 薄型盲螺母103 DIN 920 开槽小圆柱头螺钉104 DIN 921 开槽大圆柱头螺钉105 DIN 923 开槽圆柱头轴肩螺钉106 DIN 927 开槽无头轴肩螺钉107 DIN 928 焊接方螺母108 DIN 929 焊接六角螺母109 DIN 931 六角头螺栓（半牙）110 DIN 933 六角头螺栓（全牙）111 DIN 934 六角头螺母(1型)112 DIN 934-2 细牙六角头螺母(1型) 113 DIN 935 开槽六角螺母114 DIN 936 六角头薄螺母115 DIN 937 六角头开槽薄螺母116 DIN 938 双头螺距（牙长=1D）117 DIN 939 双头螺距（牙长=1.25D）118 DIN 939 双头螺距（牙长=1.5D）119 DIN 940 双头螺距（牙长=1.5D）120 DIN 960 六角头细牙螺栓（半牙）121 DIN 961 六角头细牙螺栓（全牙）122 DIN 962 头部穿孔六角头螺栓123 DIN 963 开槽沉头螺钉124 DIN 964 开槽半沉头螺钉125 DIN 965 十字槽沉头螺钉126 DIN 966 十字槽半沉头螺钉127 DIN 970 六角头螺母128 DIN 971 六角头螺母129 DIN 972 细牙六角头螺母(2型)130 DIN 975 牙条(全螺纹)131 DIN 976 螺纹销132 DIN 979 六角头开槽薄螺母（2型）133 DIN 980 全金属六角锁紧螺母（1型）134 DIN 981 圆螺母135 DIN 982 六角头尼龙锁紧螺母136 DIN 985 六角头薄型尼龙锁紧螺母137 DIN 986 六角盖型尼龙锁紧螺母138 DIN 988 配合垫片139 DIN 1052 木材连接用垫片140 DIN 1151 沉头钢钉141 DIN 1440 销钉专用垫片A型142 DIN 1441 销钉专用垫片143 DIN 1444 带头销钉144 DIN 1471 圆锥型槽销145 DIN 1472 圆锥型槽销(半槽)146 DIN 1473 平行槽销(带倒角)147 DIN 1474 前端凹槽槽销148 DIN 1475 中部凹槽槽销149 DIN 1476 圆头槽销150 DIN 1477 沉头槽销151 DIN 1479 六角螺母棒152 DIN 1480 花篮螺栓153 DIN 1481 弹性圆柱销开槽重型154 DIN 1587 组合式盖型螺母155 DIN 1804 开槽圆螺母（配合沟头扳手）156 DIN 1816 圆螺母（带插销孔）157 DIN 2093 盘型弹簧垫圈158 DIN 3017 喉箍159 DIN 3404 润滑油嘴（旋扭头）160 DIN 3567 管夹161 DIN 3570 U型螺栓162 DIN 5587 2型六角螺母A和B级163 DIN 6319 球面垫圈164 DIN 6325 圆柱销165 DIN 6330 厚六角螺母166 DIN 6331 厚六角法兰面螺母167 DIN 6334 长六角螺母168 DIN 6797-A 外齿锁紧垫圈169 DIN 6797-I 内齿锁紧垫圈170 DIN 6798-A 外锯齿锁紧垫圈171 DIN 6798-I 内锯齿锁紧垫圈172 DIN 6799 开口挡圈173 DIN 6823 六角法兰面螺母174 DIN 6885 平键（A型）175 DIN 6888 半圆键176 DIN 6899 嵌环（支撑环）177 DIN 6900 机器螺钉和垫圈组合件178 DIN 6901 自攻螺钉和垫圈组合件179 DIN 6912 薄型带孔内六角圆柱头螺钉180 DIN 6914 大六角头螺栓181 DIN 6915 大六角螺母182 DIN 6916 大垫圈183 DIN 6917 楔型方垫圈184 DIN 6921 六角法兰面螺栓加大系列B级185 DIN 6923 六角法兰面螺母186 DIN 6925 全金属六角锁紧螺母(2型）187 DIN 7337 开口型抽芯铆钉（沉头、扁圆头）188 DIN 7338 扁平头半空心/全空心铆钉189 DIN 7343 螺旋夹紧销190 DIN 7346 轻型弹性圆柱销191 DIN 7349 重型弹性圆柱销用垫圈192 DIN 7500 ISO公制螺纹螺钉(多种头型)193 DIN 7504 自攻自钻螺钉(多种头型)194 DIN 7513 开槽切削螺纹螺钉(多种头型) 195 DIN 7516 十字槽切削螺纹螺钉(多种头型) 196 DIN 7965 T型四爪螺母197 DIN 7968 钢结构用六角头螺栓连接副198 DIN 7971 开槽盘头自攻螺钉199 DIN 7972 开槽沉头自攻螺钉200 DIN 7973 开槽半沉头自攻螺钉201 DIN 7976 六角头自攻螺钉202 DIN 7978 圆锥销203 DIN 7980 圆柱头螺钉用弹簧垫圈204 DIN 7981 十字槽盘头自攻螺钉205 DIN 7982 十字槽沉头自攻螺钉206 DIN 7983 十字槽半沉头自攻螺钉207 DIN 7984 薄型内六角圆柱头螺钉208 DIN 7985 十字槽盘头螺钉209 DIN 7989 钢结构用垫圈210 DIN 7990 钢结构用六角头螺栓211 DIN 7991 内六角沉头螺钉212 DIN 7993 轴用钢丝挡圈213 DIN 7995 十字槽半沉头木螺钉214 DIN 7996 十字槽圆头木螺钉215 DIN 7997 十字槽沉头木螺钉216 DIN 8140 螺纹护套（普通\自锁等）217 DIN 9021 大外径垫圈218 DIN 11024 弹簧卡子219 DIN 13257 平板螺栓220 DIN 18182 干壁钉（墙板钉）221 DIN 28129 环型螺母222 DIN 70952 圆螺母用止退垫圈螺丝，紧固件，标准件词汇的中英文对照机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力车修壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts 焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角木牙螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems) 大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control Bolts拉栓Blind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd 电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage 螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers 螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind Nuts拉钉Blind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动拉钉钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl)装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings 汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod。
DIN标紧固件的中文对照
DIN标紧固件的中文对照序号xx标准中文译文4DIN 1圆锥销5DIN 7圆柱销6DIN 84开槽圆柱头螺钉7DIN 85开槽盘头螺钉8DIN 93xx止动垫圈9DIN 94开口销10DIN 95开槽半沉头xx11DIN 96开槽半圆头xx12DIN 97开槽沉头xx13DIN 125-1平垫14DIN 125-2平垫(带倒角)15DIN 126平垫16DIN 127-1重型弹垫17DIN 127标准弹垫18DIN 128-1波形弹垫19DIN 137-1弹簧止动垫圈20DIN 137-2鞍形弹垫21DIN 186T型方颈螺栓22DIN 188T型双接头螺栓23DIN 258螺纹圆锥销24DIN 261T型头螺栓25DIN 315AF蝶型螺母(xx制)26DIN 315DF蝶型螺母(德制)27DIN 316AF蝶型螺钉(xx制)28DIN 317DF蝶型螺钉(德制)29DIN 319圆球型盖型螺母30DIN 404开槽带孔球面圆柱头螺钉31DIN 417开槽长圆柱端紧定螺钉DIN405 32DIN 427开槽平端紧定螺钉(半牙)33DIN 431小六角特薄细牙螺母34DIN 432外舌止动垫圈35DIN 433小垫圈(用于圆柱头螺钉)36DIN 434方斜垫圈(U型)37DIN 435方斜垫圈(I型)38DIN 436方垫圈39DIN 438开槽凹端紧定螺钉40DIN 439六角薄螺母41DIN 439六角薄螺母B级无倒角42DIN 439细牙六角薄螺母43DIN 440xx专用垫圈44DIN 443xx帽45DIN 444活节螺栓B型46DIN 462内舌止动垫圈47DIN 463xx止动垫圈48DIN 464滚花高头螺钉49DIN 465开槽滚花高头螺钉50DIN 466滚花高螺母51DIN 467滚花薄螺母52DIN 470锁紧垫圈53DIN 471轴用弹性挡圈54DIN 472xx弹性挡圈55 DIN 478方头带垫螺栓56 DIN 479方头圆柱底端螺栓57 DIN 480方头带垫半圆底端螺栓58 DIN 481弹性圆柱销59 DIN 508 T型槽螺母60 DIN 525单头螺柱61 DIN 529地脚螺栓62 DIN 546带槽圆螺母63 DIN 547端面带xx圆螺母64 DIN 551开槽平端紧定螺钉65 DIN 553开槽锥端紧定螺钉66 DIN 555六角螺母67 DIN 557方螺母-C68 DIN 558六角头螺钉69 DIN 561六角头圆柱端紧定螺钉70 DIN 562薄型方螺母-B71 DIN 571六角头xx72 DIN 580吊环螺钉73 DIN 582吊环螺母74 DIN 601六角头螺栓75 DIN 603大半圆头方颈螺栓(马车螺栓) C级76 DIN 604沉头带插销马车螺栓77 DIN 605沉头长方颈马车螺栓78 DIN 607半圆头带插销马车螺栓79 DIN 608沉头短方颈马车螺栓80 DIN 609六角头精配螺栓（长螺纹）81 DIN 610六角头精配螺栓（短螺纹）82 DIN 653滚花平头螺钉83 DIN 660半圆头铆钉84 DIN 661沉头铆钉85 DIN 662半沉头铆钉86 DIN 674大扁头铆钉87 DIN 703重型侧面带xx圆螺母88 DIN 705侧面带xx圆螺母89 DIN 741卡头90 DIN 787 T型槽螺钉91 DIN 835双头螺柱（牙长=2D）92 DIN 906xx锥型闭锁螺钉93 DIN 908xx直型闭锁螺钉94 DIN 909外六角锥型闭锁螺钉95 DIN 910外六角直型闭锁螺钉96 DIN 911xx扳手97 DIN 912xx圆柱头螺钉98 DIN 913xx平端紧定螺钉99 DIN 914xx尖端紧定螺钉100 DIN 915内六角圆柱端紧定螺钉101 DIN 916内六角凹端紧定螺钉102 DIN 917薄型盲螺母103 DIN 920开槽小圆柱头螺钉104 DIN 921开槽大圆柱头螺钉105 DIN 923开槽圆柱头轴肩螺钉106 DIN 927开槽无头轴肩螺钉107 DIN 928焊接方螺母108 DIN 929焊接六角螺母109 DIN 931六角头螺栓（半牙）110 DIN 933六角头螺栓（全牙）111 DIN 934六角头螺母(1型)112 DIN 934-2细牙六角头螺母(1型) 113 DIN 935开槽六角螺母114 DIN 936六角头薄螺母115 DIN 937六角头开槽薄螺母116 DIN 938双头螺距（牙长=1D）117 DIN 939双头螺距（牙长=1.25D）118 DIN 939双头螺距（牙长=1.5D）119 DIN 940双头螺距（牙长=1.5D）120 DIN 960六角头细牙螺栓（半牙）121 DIN 961六角头细牙螺栓（全牙）122 DIN 962头部穿孔六角头螺栓123 DIN 963开槽沉头螺钉124 DIN 964开槽半沉头螺钉125 DIN 965十字槽沉头螺钉126 DIN 966十字槽半沉头螺钉127 DIN 970六角头螺母128 DIN 971六角头螺母129 DIN 972细牙六角头螺母(2型)130 DIN 975牙条(全螺纹)131 DIN 976螺纹销132 DIN 979六角头开槽薄螺母（2型）133 DIN 980全金属六角锁紧螺母（1型）134 DIN 981圆螺母135 DIN 982六角头尼龙锁紧螺母136 DIN 985六角头薄型尼龙锁紧螺母137 DIN 986六角盖型尼龙锁紧螺母138 DIN 988配合垫片139 DIN 1052木材连接用垫片140 DIN 1151沉头钢钉141 DIN 1440销钉专用垫片A型142 DIN 1441销钉专用垫片143 DIN 1444带头销钉144 DIN 1471圆锥型槽销145 DIN 1472圆锥型槽销(半槽)146 DIN 1473平行槽销(带倒角)147 DIN 1474前端凹槽槽销148 DIN 1475中部凹槽槽销149 DIN 1476圆头槽销150 DIN 1477沉头槽销151 DIN 1479六角螺母棒152 DIN 1480花篮螺栓153 DIN 1481弹性圆柱销开槽重型154 DIN 1587组合式盖型螺母155 DIN 1804开槽圆螺母（配合沟头扳手）156 DIN 1816圆螺母（带插销孔）157 DIN 2093盘型弹簧垫圈158 DIN 3017喉箍159 DIN 3404润滑油嘴（旋扭头）160 DIN 3567管夹161 DIN 3570 U型螺栓162 DIN 5587 2型六角螺母A和B级163 DIN 6319球面垫圈164 DIN 6325圆柱销165 DIN 6330厚六角螺母166 DIN 6331厚六角法兰面螺母167 DIN 6334xx六角螺母168 DIN 6797-A外齿锁紧垫圈169 DIN 6797-I内齿锁紧垫圈170 DIN 6798-A外锯齿锁紧垫圈171 DIN 6798-I内锯齿锁紧垫圈172 DIN 6799开口挡圈173 DIN 6823六角xx面螺母174 DIN 6885平键（A型）175 DIN 6888半圆键176 DIN 6899嵌环（支撑环）177 DIN 6900机器螺钉和垫圈组合件178 DIN 6901自攻螺钉和垫圈组合件179 DIN 6912薄型带孔内六角圆柱头螺钉180 DIN 6914大六角头螺栓181 DIN 6915大六角螺母182 DIN 6916大垫圈183 DIN 6917楔型方垫圈184 DIN 6921六角法兰面螺栓加大系列B级185 DIN 6923六角xx面螺母186 DIN 6925全金属六角锁紧螺母(2型）187 DIN 7337开口型抽芯铆钉（沉头、扁圆头）188 DIN 7338扁平头半空心/全空心铆钉189 DIN 7343螺旋夹紧销190 DIN 7346轻型弹性圆柱销191 DIN 7349重型弹性圆柱销用垫圈192 DIN 7500 ISO公制螺纹螺钉(多种头型) 193 DIN 7504自攻自钻螺钉(多种头型)194 DIN 7513开槽切削螺纹螺钉(多种头型) 195 DIN 7516十字槽切削螺纹螺钉(多种头型) 196 DIN 7965 T型四爪螺母197 DIN 7968钢结构用六角头螺栓连接副198 DIN 7971开槽盘头自攻螺钉199 DIN 7972开槽沉头自攻螺钉200 DIN 7973开槽半沉头自攻螺钉201 DIN 7976六角头自攻螺钉202 DIN 7978圆锥销203 DIN 7980圆柱头螺钉用弹簧垫圈204 DIN 7981十字槽盘头自攻螺钉205 DIN 7982十字槽沉头自攻螺钉206 DIN 7983十字槽半沉头自攻螺钉207 DIN 7984薄型内六角圆柱头螺钉208 DIN 7985十字槽盘头螺钉209 DIN 7989钢结构用垫圈210 DIN 7990钢结构用六角头螺栓211 DIN 7991xx沉头螺钉212 DIN 7993轴用钢丝挡圈213 DIN 7995十字槽半沉头木螺钉214 DIN 7996十字槽圆头木螺钉215 DIN 7997十字槽沉头木螺钉216 DIN 8140螺纹护套（普通\自锁等）217 DIN 9021大外径垫圈218 DIN 11024弹簧xx219 DIN 13257平板螺栓220 DIN 18182干壁钉（墙板钉）221 DIN 28129环型螺母222 DIN 70952圆螺母用止退垫圈螺丝，紧固件，标准件词汇的中英文对照机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力xx壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角xx螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws 犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts 六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind NutsxxBlind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings 中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动xx钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl) 装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod。
UNI-DIN-ISO标准号对比
acc. 8.8
5933
7991
-
Viti a testa svasata piana con cava esagonale Hexagon socket countersunk head cap screws
acc.10.9
5923
Viti senza testa con cava esagonale ed estremità piana
Dadi esagonali tipo 1 con filettatura a passo fine Hexagon nuts type 1 fine thread
Dadi esagonali bassi con filettatura a passo grosso Hexagon nuts low coarse thread
acc. 45 H
-
906
-
Tappi conici con cava esagonale Hexagon socket pipe plugs
acc. 5.8
Tappi cilindrici con battuta e cava esagonale
-
908
-
Socket screws plugs
acc. 5.8
Dadi esagonali bassi Hexagon nuts low
Dadi esagonali flangiati con dentatura di bloccaggio Hex flange nuts
Dadi ad alette Wing nuts
Dadi esagonali ciechi con calotta sferica Hex domed nuts (scorn nuts)
Triple-Lok Plus集装器安装说明书
Triple-Lok ®PlusAssembly Instructions4310-A 2/U KP l a n t i j n C a s p a r i e 0405Parker Hannifin plc Haydock Park Road GB-Derby DE24 8J HPhone +44 1332 365631Fax +44 1332 292146/euro_tfdPressure increases up to PN 500 barImproved corrosion resistance to white rustIndividually bagged to eliminate contamination and handling damage Increased standard product range Parflange ® tube preparationTube preparationCut and deburr thoroughlyTube selectionSelect suitable tube materialMinimum length of straight tube-ends (see chart right)Remove internal and external burrs max. chamfer 0.3mm x 45°Recommendation: In-Ex T ube Deburring T ool 226Proper deburring and cleaning of innerdiameter essential for sealing surface qualityCalculate tube length before cuttingAdd extra length “L“Cut tube squarely max. ±1° deviationDo not use pipe cutters Use tube-cutting tool AV for manual cutting234Triple-Lok ®Plus advantagesSteel tube Stainless Steel tube Cold drawn Welded Cold drawn seamless & redrawn seamless NF A 49330NF A 49341NF A 49341ISO 3304 R DIN 2393DIN 17458 DA/T3DIN 2391C pt 1BS 3602/2ASTM A 269BS 3602 pt1SAE J5251.4571SAE J524Tube preparation chart Metric tube [mm]Inch tube [inch]Extra length Minimum straight length Tube ØWall thickness Tube ØWall thickness ~ L [mm]to start to bend L1 [mm]6 1.0 - 1.51/4"0.020 - 0.065 2.0408 1.0 - 1.55/16"0.020 - 0.065 2.04010 1.0 - 1.53/8"0.020 - 0.065 2.04212 1.0 - 2.51/2"0.028 - 0.083 2.54314 1.5 - 2.0 2.55215 1.0 - 2.5 2.55216 1.5 - 2.55/8"0.035 - 0.095 2.55218 1.5 - 3.0 3.05620 2.0 - 3.03/4"0.035 - 0.109 3.05722 1.5 - 3.0 3.05825 2.0 - 3.01"0.035 - 0.120 3.05828 1.5 - 3.0 4.06530 2.0 - 3.0 4.06532 2.0 - 3.0 1.1/4"0.049 - 0.120 4.06535 2.0 - 3.0 4.07038 2.0 - 4.0 1.1/2"0.049 - 0.1204.07042*2.0 -3.05.080*Tube OD 42 mm:- 1015: not suitable- KarryFlare: special flaring pin KARRYFLARE/FPIN42 required1Ø37° Flaring Parflange ®-ProcessPreferred method Most efficient method Parflange ®recommendedSelect flaring pin according totube dimensionsUse special “SS“ pin for stainless steel tubePin must be clean and free of wear and damageLoad tooling into machine Keep flaring pin clean and lubricate regularlySelect flaring dies accordingto tube dimensionsUse special “SS“ dies forstainless steel tubeGrip surface must be clean and free of wearUse only genuine Parkertooling for flaring Triple-Lok ® PlusLoad tooling into machine Keep sliding surfaces clean and lubricatedSlide nut and sleeve as shown onto the tube-end1234567Parflange ® 1040Parflange ® 1025Press tube firmly into the die against the tube stop Parflange ® 1025:Operate clamping lever Parflange ® 1040:Automatic tube clampingHold tube firmly Press start buttonKeep hands clear off the working areaParflange ® 1025:Unclamp the dies Parflange ® 1040:Die unclamping is automatic Remove tube from machine Use die separator to free tubeInstallation in fittings123460°1 flat = 60°Steel fittings:No lubricationStainless steel fittings:Lubrication requiredUse EO-NIROMONT special high-performance lubricant for stainless steel fittingsThread nut onto bodyTighten to full metal contact (finger tight)Mark body and nut as quality checkTighten with spanner the number of flats indicatedUse spanner extension for larger fittings (28mm)Tightening recommendation Metric Inch SAE α flats fromAssembly torque tube tube thread finger tight method* Nm -0% + 10%[mm][inch]Tube Swivel nut Steel Stainless Steel 61/4"7/16-202"2"153085/16"1/2-202"2"2040103/8"9/16-18 1.1/2" 1.1/4"3060121/2"3/4-16 1.1/2"1"60115147/8-14 1.1/2"1"75145157/8-14 1.1/2"1"75145165/8"7/8-14 1.1/2"1"7514518 1.1/16-12 1.1/4"1"110180203/4" 1.1/16-12 1.1/4"1"110180227/8" 1.3/16-121"1"135225251" 1.5/16-121"1"17525528 1.5/8-121"26029530 1.5/8-121"1"26029532 1.1/4" 1.5/8-121"1"26029535 1.7/8-121"34034538 1.1/2"1.7/8-121"1"340345422.1/4-121"1"380400* “Flats From Finger Tight“Method for steel and stainless steelChecking the flare12maxØØ Dmin Clean flare for inspection Check sealing surface for cracks, burrs, scratches and pittingDimensional check of the flare Flare O.D. should not exceed outside sleeve diameterFlare O.D. should not be less than smaller diameter of front of sleeve When in doubt, measureTube O.D.Ø D mm Inch Min.Max.[mm][mm]61/4"8.609.7085/16"10.2010.30103/8"11.7012.70121/2"16.0017.301419.3020.201519.3020.20165/8"19.3020.201823.4024.70Tube O.D.Ø D mm Inch Min.Max.[mm][mm]203/4"23.4024.70227/8"26.5027.80251"29.7031.002837.6038.903037.6038.9032 1.1/4"37.6038.903543.2045.3038 1.1/2"43.2045,304252.0054.80Flaring pin is integrated in flaring blockPin must be clean and free of wear and damage Keep flaring pin clean KarryFlare: Flaring pin for 42 mm tube O.D. must be fitted with flat face on topSelect flaring dies according to tube O.D.Grip surface must be clean and free of wearUse only genuine Parker tooling for flaring Triple-Lok ® PlusKeep sliding surfaces clean and lubricatedSlide nut and sleeve as shown onto the tube-endLubricate tube-end inside Lubricant 1040SS recommended37° Flaring with EOMAT/KarryFlareEfficient methodParflange ® recommendedHold tube firmlyEOMA T: Press and hold start buttonKarryFlare: Operate hand pump until assembly pressure is reached Keep hands clear off the working areaKarryFlare: Do not exceed max pressure 400 barKarryFlare:Open valve on handpump Remove tube from machine Use die separator to free tubeEOMA T II:Adjustment according to pressure on machine EOMAT III/A:Menu selection (FLARE)KarryFlare:Refer to chart on machine Non-EOMAT -machines:check suitability1234567Press tube firmly into the die against the tube stop KarryFlare:Close valve on handpump KarryFlare:Keep lid closed8EOMAT IIEOMAT III/AKarryFlare2104039-Poster-Triple-LokPlus-4310-A2-UK-06.04.05.p6511.04.2005, 10:051。
Jokab Safety BSR10 安全传感器接入模块说明书
[DE] Die komplette Originalbetriebsanleitung ist zu finden unter:[IT] Le istruzioni originali complete si trovano qui:[FR] La notice originale intégrale est disponible sur:[ES] La versión original de las instrucciones está disponible en:/jokabsafetyABB ABJokab SafetyVarlabergsvägen 11 SE-434 39 Kungsbacka Tel. +46 (0) 21-32 50 /jokabsafetyProduct descriptionBSR10 is a safety relay with basic monitoring functions for 1- and 2-channel sensors and equivalent contacts for expansion of safety modules.InstallationWARNING: The product must be installed by a trained electrician following applicable safety regulations, standards and the machinedirective.CAUTION: The safety relay shall be attached on a 35 mm DIN railin an enclosure that has at least protection class IP54.CAUTION: Make sure there is at least 10 mm distance between the safety relay and other non-Sentry safety relay units to preventuncontrolled heating.CAUTION: Make sure there is at least 50 mm distance above and below the safety relay and other units for correct air flow in the venting holes of the safety relay.ConnectionWARNING: The safety relay and the sensor device for monitoring must be connected to SELV/PELV power supply.B)A. One signal from +24VDC, start and stopB. Two signals from +24VDC / 0VC. One signal from +24VDCD. One signal from +24VDC, startE. One signal from +24VDCLED indicationON/OUT/X4IndicationProcedure for correction off/off/offLoss of power supply or too low voltage. Occurs during regular operation.Measure R1/R2 voltage.green/off/offInput X4 is not powered with correct voltage. Occurs during regular operation.Measure X4/R2 voltage.Troubleshoot the monitored device.green/off/green Safety relay internal error.Exchange the safety relay.off/off/green No signal to R1. Occurs during regular operation.Measure R1/R2 voltage.green/green/greenRelay is activatedTechnical dataMeasurements Height/width/depth120 mm/22.5 mm/120 mmRelay output specification Maximum operating switching voltage250 VAC Overvoltage category IIInput R1, R2 and X1Minimum high/Maximum low voltage 15 V/1 V Maximum current sink 200 mA NO contactAC load (AC15, AC1), ratedoperational voltage, current 1/2/3 contact(s)250 VAC, 5 A/5 A/4.6 A DC load (DC13, DC1), ratedoperational voltage, current 1/2/3 contact(s)+24 VDC, 6 A/5.6 A/4.6 ARequired fuse 6.3 A gG, 1 kA short circuit protection (6 A according to UL248)NC contactAC load (AC15, AC1), rated operational voltage/current 250 VAC/0.5 A DC load (DC13, DC1), rated operational voltage/current +24 VDC/2 ARequired fuse4 A gG, 1kA short circuit protection (4 A according to UL 248)Connection block and wire properties Maximum screw torque 0.8 NmSolid conductor, minimum 1 x 24 AWG (0.2 mm 2), 2 x 24 AWG (0.2 mm 2)Solid conductor, maximum1 x 12 AWG (3.31 mm 2), 2 x 16 AWG (1.31 mm 2)Conductor with crimp sleeve, minimum1 x 24 AWG (0.2 mm 2), 2 x 24 AWG (0.2 mm 2)Conductor with crimp sleeve, maximum 1 x 12 AWG (3.31 mm 2), 2 x 16 AWG (1.31 mm 2)Wire strip length6-7 mm Maximum response time Response time at activation, start 40 ms Response time at deactivation20 ms2TLC010003M0201 Rev BWhile every effort has been taken to ensure the accuracy of information contained in this book and any associated promotional and information material ABB JokabSafety cannot accept responsibility for errors or omissions and reserves the right to make any improvements without notice. It is the users responsibility to ensure that this equipment is correctly designed, specified, installed, cared for and operated to meet all applicable local, national and international codes/regulations. Technical data in our book is correct to the level of accuracy of ABB Jokab Safety´s test procedures as verified by various international approved bodies. Other information (such as application examples, wiring diagrams, operation or use) is intended solely to illustrate the various uses of our products. ABB Jokab Safety does not quarantee or imply that the product when used in accordance with such examples in a particular environment will fulfil any particular safety requirement and does not assume any responsibility or liability for actual use of the product based on the examples given.[DE] Die komplette Originalbetriebsanleitung ist zu finden unter:[IT] Le istruzioni originali complete si trovano qui:[FR] La notice originale intégrale est disponible sur:[ES] La versión original de las instrucciones está disponible en:/jokabsafetyElectrical operations life time Load Σlth² ≤ 64, AC1, AC15160 000 operations Load Σlth² ≤ 64, DC1, DC13100 000 operationsMechanical operations lifetime 107 operations Environmental data Protection class, safety relay IP20Protection class, enclosureAt least IP54Ambient temperature range foroperation within specified operation range-10°C – +65°C Humidity range for operation25 % ≤ Rh ≤ 90 %, non-condensing and without icingSuitable for use at ≤ 2000 metres above sea level.Standard compliance and approvals Functional safety standard complianceEN 61508-1:2010, up to SIL3 EN ISO 13849-1:2008, up to PLe/Cat.4EN 62061:2005, up to SILCL3 EN 61511-1:2003ApprovalsCE, TÜV SÜD, cULus Declaration of conformityCan be found at:/jokabsafety Information for use in USA/Canada Intended use Applications according to NFPA 79Power sourceA suitable isolating source in conjunction with a fuse in accordance with UL 248FuseThe fuse shall be rated max. 4 A and be installed in the +24 VDC power supply to the device in order to limit the available current.MaintenanceWARNING: The safety functions and mechanics shall be testedevery year to confirm that the safety functions work properly.WARNING: Repair and exchange of parts of the safety relay is not permitted since it may accidentally cause permanent damage to the product, imparing safety of the device which in turn could lead to serious injury to personnel. In case of breakdown or damage to the product contact ABB Jokab safety to replace the safety relay with a similar product.。
DIN标紧固件的中文对照
DIN标紧固件的中文对照序号xx标准中文译文4DIN 1圆锥销5DIN 7圆柱销6DIN 84开槽圆柱头螺钉7DIN 85开槽盘头螺钉8DIN 93xx止动垫圈9DIN 94开口销10DIN 95开槽半沉头xx11DIN 96开槽半圆头xx12DIN 97开槽沉头xx13DIN 125-1平垫14DIN 125-2平垫(带倒角)15DIN 126平垫16DIN 127-1重型弹垫17DIN 127标准弹垫18DIN 128-1波形弹垫19DIN 137-1弹簧止动垫圈20DIN 137-2鞍形弹垫21DIN 186T型方颈螺栓22DIN 188T型双接头螺栓23DIN 258螺纹圆锥销24DIN 261T型头螺栓25DIN 315AF蝶型螺母(xx制)26DIN 315DF蝶型螺母(德制)27DIN 316AF蝶型螺钉(xx制)28DIN 317DF蝶型螺钉(德制)29DIN 319圆球型盖型螺母30DIN 404开槽带孔球面圆柱头螺钉31DIN 417开槽长圆柱端紧定螺钉DIN405 32DIN 427开槽平端紧定螺钉(半牙)33DIN 431小六角特薄细牙螺母34DIN 432外舌止动垫圈35DIN 433小垫圈(用于圆柱头螺钉)36DIN 434方斜垫圈(U型)37DIN 435方斜垫圈(I型)38DIN 436方垫圈39DIN 438开槽凹端紧定螺钉40DIN 439六角薄螺母41DIN 439六角薄螺母B级无倒角42DIN 439细牙六角薄螺母43DIN 440xx专用垫圈44DIN 443xx帽45DIN 444活节螺栓B型46DIN 462内舌止动垫圈47DIN 463xx止动垫圈48DIN 464滚花高头螺钉49DIN 465开槽滚花高头螺钉50DIN 466滚花高螺母51DIN 467滚花薄螺母52DIN 470锁紧垫圈53DIN 471轴用弹性挡圈54DIN 472xx弹性挡圈55 DIN 478方头带垫螺栓56 DIN 479方头圆柱底端螺栓57 DIN 480方头带垫半圆底端螺栓58 DIN 481弹性圆柱销59 DIN 508 T型槽螺母60 DIN 525单头螺柱61 DIN 529地脚螺栓62 DIN 546带槽圆螺母63 DIN 547端面带xx圆螺母64 DIN 551开槽平端紧定螺钉65 DIN 553开槽锥端紧定螺钉66 DIN 555六角螺母67 DIN 557方螺母-C68 DIN 558六角头螺钉69 DIN 561六角头圆柱端紧定螺钉70 DIN 562薄型方螺母-B71 DIN 571六角头xx72 DIN 580吊环螺钉73 DIN 582吊环螺母74 DIN 601六角头螺栓75 DIN 603大半圆头方颈螺栓(马车螺栓) C级76 DIN 604沉头带插销马车螺栓77 DIN 605沉头长方颈马车螺栓78 DIN 607半圆头带插销马车螺栓79 DIN 608沉头短方颈马车螺栓80 DIN 609六角头精配螺栓（长螺纹）81 DIN 610六角头精配螺栓（短螺纹）82 DIN 653滚花平头螺钉83 DIN 660半圆头铆钉84 DIN 661沉头铆钉85 DIN 662半沉头铆钉86 DIN 674大扁头铆钉87 DIN 703重型侧面带xx圆螺母88 DIN 705侧面带xx圆螺母89 DIN 741卡头90 DIN 787 T型槽螺钉91 DIN 835双头螺柱（牙长=2D）92 DIN 906xx锥型闭锁螺钉93 DIN 908xx直型闭锁螺钉94 DIN 909外六角锥型闭锁螺钉95 DIN 910外六角直型闭锁螺钉96 DIN 911xx扳手97 DIN 912xx圆柱头螺钉98 DIN 913xx平端紧定螺钉99 DIN 914xx尖端紧定螺钉100 DIN 915内六角圆柱端紧定螺钉101 DIN 916内六角凹端紧定螺钉102 DIN 917薄型盲螺母103 DIN 920开槽小圆柱头螺钉104 DIN 921开槽大圆柱头螺钉105 DIN 923开槽圆柱头轴肩螺钉106 DIN 927开槽无头轴肩螺钉107 DIN 928焊接方螺母108 DIN 929焊接六角螺母109 DIN 931六角头螺栓（半牙）110 DIN 933六角头螺栓（全牙）111 DIN 934六角头螺母(1型)112 DIN 934-2细牙六角头螺母(1型) 113 DIN 935开槽六角螺母114 DIN 936六角头薄螺母115 DIN 937六角头开槽薄螺母116 DIN 938双头螺距（牙长=1D）117 DIN 939双头螺距（牙长=1.25D）118 DIN 939双头螺距（牙长=1.5D）119 DIN 940双头螺距（牙长=1.5D）120 DIN 960六角头细牙螺栓（半牙）121 DIN 961六角头细牙螺栓（全牙）122 DIN 962头部穿孔六角头螺栓123 DIN 963开槽沉头螺钉124 DIN 964开槽半沉头螺钉125 DIN 965十字槽沉头螺钉126 DIN 966十字槽半沉头螺钉127 DIN 970六角头螺母128 DIN 971六角头螺母129 DIN 972细牙六角头螺母(2型)130 DIN 975牙条(全螺纹)131 DIN 976螺纹销132 DIN 979六角头开槽薄螺母（2型）133 DIN 980全金属六角锁紧螺母（1型）134 DIN 981圆螺母135 DIN 982六角头尼龙锁紧螺母136 DIN 985六角头薄型尼龙锁紧螺母137 DIN 986六角盖型尼龙锁紧螺母138 DIN 988配合垫片139 DIN 1052木材连接用垫片140 DIN 1151沉头钢钉141 DIN 1440销钉专用垫片A型142 DIN 1441销钉专用垫片143 DIN 1444带头销钉144 DIN 1471圆锥型槽销145 DIN 1472圆锥型槽销(半槽)146 DIN 1473平行槽销(带倒角)147 DIN 1474前端凹槽槽销148 DIN 1475中部凹槽槽销149 DIN 1476圆头槽销150 DIN 1477沉头槽销151 DIN 1479六角螺母棒152 DIN 1480花篮螺栓153 DIN 1481弹性圆柱销开槽重型154 DIN 1587组合式盖型螺母155 DIN 1804开槽圆螺母（配合沟头扳手）156 DIN 1816圆螺母（带插销孔）157 DIN 2093盘型弹簧垫圈158 DIN 3017喉箍159 DIN 3404润滑油嘴（旋扭头）160 DIN 3567管夹161 DIN 3570 U型螺栓162 DIN 5587 2型六角螺母A和B级163 DIN 6319球面垫圈164 DIN 6325圆柱销165 DIN 6330厚六角螺母166 DIN 6331厚六角法兰面螺母167 DIN 6334xx六角螺母168 DIN 6797-A外齿锁紧垫圈169 DIN 6797-I内齿锁紧垫圈170 DIN 6798-A外锯齿锁紧垫圈171 DIN 6798-I内锯齿锁紧垫圈172 DIN 6799开口挡圈173 DIN 6823六角xx面螺母174 DIN 6885平键（A型）175 DIN 6888半圆键176 DIN 6899嵌环（支撑环）177 DIN 6900机器螺钉和垫圈组合件178 DIN 6901自攻螺钉和垫圈组合件179 DIN 6912薄型带孔内六角圆柱头螺钉180 DIN 6914大六角头螺栓181 DIN 6915大六角螺母182 DIN 6916大垫圈183 DIN 6917楔型方垫圈184 DIN 6921六角法兰面螺栓加大系列B级185 DIN 6923六角xx面螺母186 DIN 6925全金属六角锁紧螺母(2型）187 DIN 7337开口型抽芯铆钉（沉头、扁圆头）188 DIN 7338扁平头半空心/全空心铆钉189 DIN 7343螺旋夹紧销190 DIN 7346轻型弹性圆柱销191 DIN 7349重型弹性圆柱销用垫圈192 DIN 7500 ISO公制螺纹螺钉(多种头型) 193 DIN 7504自攻自钻螺钉(多种头型)194 DIN 7513开槽切削螺纹螺钉(多种头型) 195 DIN 7516十字槽切削螺纹螺钉(多种头型) 196 DIN 7965 T型四爪螺母197 DIN 7968钢结构用六角头螺栓连接副198 DIN 7971开槽盘头自攻螺钉199 DIN 7972开槽沉头自攻螺钉200 DIN 7973开槽半沉头自攻螺钉201 DIN 7976六角头自攻螺钉202 DIN 7978圆锥销203 DIN 7980圆柱头螺钉用弹簧垫圈204 DIN 7981十字槽盘头自攻螺钉205 DIN 7982十字槽沉头自攻螺钉206 DIN 7983十字槽半沉头自攻螺钉207 DIN 7984薄型内六角圆柱头螺钉208 DIN 7985十字槽盘头螺钉209 DIN 7989钢结构用垫圈210 DIN 7990钢结构用六角头螺栓211 DIN 7991xx沉头螺钉212 DIN 7993轴用钢丝挡圈213 DIN 7995十字槽半沉头木螺钉214 DIN 7996十字槽圆头木螺钉215 DIN 7997十字槽沉头木螺钉216 DIN 8140螺纹护套（普通\自锁等）217 DIN 9021大外径垫圈218 DIN 11024弹簧xx219 DIN 13257平板螺栓220 DIN 18182干壁钉（墙板钉）221 DIN 28129环型螺母222 DIN 70952圆螺母用止退垫圈螺丝，紧固件，标准件词汇的中英文对照机(踏)车用螺丝、轴心Screws And Shafts For Motorcycle Or Bicycle 针车用螺丝、轴心Screws And Shafts For Sewing Maching止付螺丝Socket Set Screws不锈钢宽牙螺丝Stainless Steel Coarse Thread Screws不锈钢高低牙螺丝Stainless Steel High-Low Thread Screws不锈钢机械螺丝Stainless Steel Machine Screws不锈钢钻尾螺丝Stainless Steel Self Drilling Screws不锈钢自攻螺丝Stainless Steel Self Tapping Screws不锈钢自削螺丝Stainless Steel Thread Cutting Screws不锈钢三角牙螺丝Stainless Steel Tri-Lobular Thread Screws插片壁虎Steel Ceiling Anchors内迫壁虎Drop in Anchors碳钢锤钉壁虎Steel Hit Anchors碳钢六角螺帽Steel Hex Coupling Nuts强力xx壁虎Wedge Anchors外迫壁虎Cut Anchors化学壁虎Chemical Anchors不锈钢重载胀栓Heavy Duty Expansion Anchors鱼眼壁虎企眼长螺帽Tie Wire Anchors锌合金打入式壁虎Hammer Drive Anchors弹簧螺帽Strut Nuts兰花夹系列Toggle Bolts (Spring Toggle & Gravity Toggle)门窗、地板专用壁虎Nylon Frame Anchors or Metalframe Anchors石膏板中空壁虎Hollow Wall Anchors套管式壁虎Sleeve Anchors打入式壁虎鱼形尼龙壁虎Nylon Frame Harmmer Fixing (Nylon Hammer Drive Anchors)强力式锤钉壁虎Hit Anchors电梯壁虎Bolt Anchors重载壁虎Heavy duty anchors两片夹Loxin Masonry Anchors定位螺栓Set Bolts长型兰花夹Short Strap Anchors工具棒Drop in Setting Tools象脚壁虎Elephant foot anchors水泥预埋件Concrete Insert翻边胀轴Drop in Anchor with Lip冲件Legs Drywall Anchors六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts) 圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut六角螺丝(栓) Hex Head Cap Screws(Hex Bolts)六角机械螺丝Hex Head Machine Bolts六角xx螺丝Hex Lag Bolts四角螺丝Square Head BoltsT头螺丝T Head Bolts马车螺丝Carriage Bolts环首螺丝Eye Bolts内六角孔螺丝Hex Socket Cap Screws固定螺丝Set Screws螺椿栓Stud Bolts螺旋椿Screw Studs轮壳螺栓Wheel Bolts翼形螺丝Wing Screws自攻螺丝Self Tapping Screws自削螺丝Thread Cutting Screws钻尾螺丝Self Drilling Screws旋入螺丝Drive Screws机械螺丝Machine Screws木螺丝Wood Screws家具螺丝Furniture Screws塑板螺丝Chipboard Screws墙用螺丝Drywall Screws基础螺栓Foundation BoltsU型螺栓U Bolts勾头螺栓Hook Bolts套挂螺丝Toggle Bolts突缘螺丝Flange Bolts轨道螺栓(鱼尾螺丝) Track Bolts耐候钢螺丝Corten Steel Heavy Hex Bolts扭矩控制螺栓T.C.Bolts高张力螺栓High Strength Bolts剪力钉(焊接螺丝) Welding Studs螺丝附华司组合Screws And Washers Assembled(Sems)大尺寸螺栓Big Size Bolts不锈钢小螺丝Stainless Steel Sheet Metal Screws不锈钢大螺丝Stainless Steel Bolts铜螺丝Brass Screws铝螺丝Aluminum Screws合金钢螺丝Alloy Steel Screws电子螺丝Electronic Screws微小精密螺丝Micro Screws塑料螺丝Plastic Screws复合材料用螺丝Particle Board Screws钛合金螺丝Titanium Alloy Bolts钛、锆、钼、铌等螺丝、零件、材料Ti,Zr,Mo,Nb Pare Metal Bolts Parts 拇指螺丝Thumb Screws双头牙螺丝Double End Screws Hanger Bolt车辆(汽车)螺丝、螺帽Automotive Fasteners航天用螺丝Aerospace Fasteners飞机特殊扣件Source Control BoltsxxBlind Bolts面板螺丝Panel Fasteners电梯螺丝Elevator Bolts四角头固定螺丝Square Set Screws大头马车螺丝Step Bolts单向螺丝One Way Lag Screws管夹螺丝Hose Clamp Screws不锈钢固定螺丝Stainless Steel Hex Socket Cap Screws 不锈钢内六角螺丝Stainless Steel Hex Socket Cap Screws 铰链螺丝Hinge Screws货柜螺丝Container Screws复合材料钻尾螺丝Bi-Metal Self Drilling Screws三角牙螺丝Trilobular Thread Screws高低牙螺丝High Low Screws夹板用螺丝Particle Board Screws马桶螺丝Toilet Closet Bolts特长螺丝Special Longer Screws建业螺丝Building Fasteners不锈钢六角螺丝Stainless Steel Hex Socket Cap Screws 其它特殊螺丝Special Screws Or Bolts不锈钢特殊螺丝Special Stainless Steel Screws宽牙螺丝（粗牙螺丝）Coarse Thread Screws链带螺丝Collated Screws水泥螺丝Concrete Screws板模螺丝Construction Bolts锌蝶螺丝Die Cast Wing Screws; Zinc Alloy重型车螺丝Heavy Duty Wheel Hub Bolts内六角固定螺丝Hex Socket Set Screws复合材料用螺丝（夹板用）Particle Board Screws 犁壁螺丝Plow Bolts不锈钢木螺丝Stainless Steel Wood Screws套挂螺栓及螺丝Toggle Bolts钛合金膨胀螺丝Titanium Alloy Expansion Bolts 六角盖头螺帽Hex Cap Nuts六角锯齿螺帽Hex Serrated Nuts六角轮缘螺帽Hex Flange Nuts高脚螺帽Hex Coupling Nuts(High Nuts)圆螺帽Round Nuts四角螺帽Square Nuts管用螺帽Pipe Nuts轮壳螺帽Wheel Nuts蝶型螺帽Wing NutsU形螺帽U NutsT形螺帽T Nuts环首螺帽Eye Nuts齿形螺帽Kep Nuts齿花螺帽Clinch Nuts耐候钢六角重型螺帽Corten Steel Heavy Hex Nuts焊接螺帽Weld Nuts高张力螺帽Heigh Strength Nuts建业用螺帽Structural Nuts不锈钢螺帽Stainless Steel Nuts铜螺帽Brass Nuts铝螺帽Aluminum Nuts合金钢螺帽Alloy Steel Nuts重型车螺帽Heavy Duty Wheel Hub Nuts铁器焊接袋帽Acorn Cap Nuts金属预置扭矩式螺帽All-Metal Prevailing Torque Type Nuts 壁虎螺帽Anchor Nuts大尺寸螺帽Big Size Nuts铁盖袋帽Closed End Acorn Nuts盘形华司螺帽Conical Washer Nuts铁盖+尼龙圈组合盖帽Din 986 Domed Cap Nuts突缘尼龙盖帽Flange Nylon Insert Lock Nuts平面华司螺帽Flat Waser Nuts六角割沟螺帽Hex Slotted Nut自锁螺帽Self-Locking Nuts制止螺帽Sliding NutsSln-自动防松螺帽Sln Self-Locking Nuts其它特殊螺帽Special Nuts弹簧螺帽Spring Nuts不锈钢突缘螺帽Stainless Steel Flange Nuts不锈钢六角轮缘尼龙螺帽Stainless Steel Flange Nylon Insert Lock Nuts 不锈钢六角重型螺帽Stainless Steel Heavy Hex Nuts不锈钢六角螺帽Stainless Steel Hex Nuts不锈钢尼龙嵌入螺帽Stainless Steel Nylon Insert Lock Nuts锌压属螺帽Zinc Die Casting Nuts普通六角螺帽Hex Nuts六角重型螺帽Heavy Hex Nuts薄型螺帽Hex Jam Nuts尼龙嵌入防松螺帽Nylon Insert Lock Nuts机械螺丝用六角螺帽Hex Machine Screw Nut合金钢线材盘元Alloy Steel Wire Rod球状化线材Annealing Wire And Rod黑铁丝Black Wire黄铜棒线Brass Wire And Rod磨光棒钢Bright Steel Bar(Hex/Round/Square)铜合金线Copper Alloy Wire线切割线E.D.M Cutting Wire快削钢线材盘元Free Cutting Steel Wire Rod线材Iron Or Steel Wire线材盘元Iron Or Steel Wire Rod洋白铜线Nickel Silver Wire磷青铜线Phosphate Bronze Wire不锈钢条棒Stainless Steel Bar(Round/Hex/Square)不锈钢冷锻线材Stainless Steel Cold Heading Wire不锈钢线(抽线后) Stainless Steel Draw Wire不锈钢线材Stainless Steel Wire不锈钢线材及盘元Stainless Steel Wire And Rod棒钢Steel Bar(Hex/Round/Square)转回90度碾线头机90讧evolving Wire Twisting Machine气动拉钉机Air Riveter各式螺丝类产品自动包装Automatic Packaging For All Kinds Of Packaging 自动包装机Automatic Packing Machine螺丝制造搓牙机械Automatic Thread Rolling Machine螺丝割尾加工机械Automatic Thread Slotting Machine螺丝制造成型机械Automatic Trimming Machine拉钉打头机Blind Rivet Heading Machine螺丝、螺帽成型机Bolt Formers,Nuts Formers,Headers螺丝、螺帽热处理Bolt Nut And Screws Heat Treatment螺丝、螺帽热处理炉Bolt Nut And Screws Heat Treatment Furnaces球状化电器炖炉Carburizing Furnace Vacuum And Bell Type Furnace超防锈复合瓷膜Ceramic Coating连续式光辉渗碳淬火炉Continuous Bright Carburizing Quenching Furnace 连续式光辉调质淬火炉Continuous Bright Hardening Quenching Furnace 中、高热镀锌光辉连续炉Continuous Bright Heat Treat Furnace连续式光辉热处理炉Continuous Type Bright Heat Treatment Furnace螺丝割尾及特殊割遘加工Machine Screw Shank Slotting螺丝钻孔加工Screw Shank Drilling鸡眼上下模Eyelets Dies一般线材、盘元、退火炉General Wire,Wire Rod,Annealing Furnace倒立式滑落型伸线机Handstand Type Wire Drawing Machine十字冲模Header Punches In Various Drives成型冲模Header Punches In Various Drives螺丝打头机Heading Machine螺丝制造高速搓牙机械High Speed Automatic Thread Rolling Machine高中低周波感应加热炉High,Medium,Low Frequency Induction Heater 空心打头机Hollow Heading Machine热浸镀锌螺丝、螺帽Hot Dip Galvanizing Bolts And Nuts机械镀锌Mechanical Galvanized迷你成型机Mini-Formers成品自动收线机Non-Stop Coiler精抽自动收线机Non-Stop Coiler(Skinpass)螺帽模Nut Forming Dies螺帽成型模Nuts Formers特殊零件成型机Parts Forming Maching冲模Punch Dies冲子Punch Pins罗拉成型机Rollers Formers机(踏)车用螺丝成型机Screw For Motorcycle Or Bicycle Heading Machine 止付螺丝成型机Set Screws Formers套高成型机Sockets Formers一般线材、盘元、螺丝合金炖炉Spheroidizing Bright Annealing Furnace 球状化热处理炉Spheroidizing Heat Treatment Furnace攻牙机Tapping Machine螺丝攻、车刀、模具Taps Dies And Tools搓牙机铁屑分离装置Thread Chip Separator滚牙轮Thread Rolling Dies牙板Thread Rolling Dies Plates精密油压滚牙机Hydraulic Thread Rolling Machines模具Tools六角整头模Trimming Dies Hexagan碳化钨模具Tungsten Carbide Die镀钛处理(Tin)专业加工服务Tin Hard Coating For Cutting Tools And Punch By Pvd电镀化学原料Various Electroplating Chemicals环规校正Calibration For Ring Gage环规、牙规、三线规校正Calibration For Ring Gage, Athread Gage, 3 Wire Gage螺丝、螺帽品检量测仪器Fasteners Inspection And Measurement Instruments螺丝、螺帽成型攻牙专用油Forming And Tapping Oils For Bolts And Nuts Formers螺丝、螺帽五金等检验Insptection Services For Fasteners And Hardware德国schatz扭力机代理Representative Of Schatz Torque MachinIso品质保证系统Iso Quality Assurance System生产管理系统Production Control System物料管理系统Material Control System齿轮Gears不锈钢牙条棒Stainless Steel Hread Rod马达轴承轴心组件Bearing Shaft(Motor)轴承轴心Bearing Shaft开口铆钉Blind Rivets长形拉帽Blind Rivet Nuts拉帽Blind NutsxxBlind Rivets实心梢Clevis Pins And Straight Pins弹片Clips卷钉Coil Nails冷锻零件Cold Forming Part开口销Cotter PinsE型环E-Rings膨胀螺栓Expansion Anchor Bolts鸡眼钉Eyelets RivetsR型销Snap Pins闸、锁Latches And Keeper Assembleds其它特殊铆钉Other Specil Rivets销Pins格式管夹、管束Pipe Hanger铆钉Rivets螺旋锔及螺旋圈Screw Hook And Screw Rings 中空钉Semi-Tubular Rivet开叉钉Split Drive Anchors弹簧华司Spring Washers弹簧蝴蝶夹Spring Wings不锈钢华司Stainlesssteel Washers钢铁钉Steel And Iron Nails搓牙铁钉Thread Nails钛合金铆钉Titaium Alloy Rivets管形铆钉Tubular Rivets华司Washers真空热处理Vacuum Heat Treatment螺丝、螺帽、五金、Diy扣件Fasteners合金钢工具Alloy Steel Tools螺栓模Bolt Heading Dies手动xx钳Hand Riveter船舶链Anchor Chain脚踏车链锁Bicycle Chain Locks螺丝起子Bit罗拉Chain Roller特殊铆合扣件Collars(A Blindfastener For Huck Intl) 装饰链Decorative Chains自攻螺纹衬套Ensat Threaded Inserts六角扳手Hexagon Keys超音螺纹压入式螺纹自动锁扣Threaded Inserts For Plastic Injection Mouldeings汽车特殊杆接件Special Auto-Mobile Fastener As Your Needs螺纹护套Recoil Inserts链条用滚子Roller For Roller Chain金属板镶嵌组件及自动夹扣组件Sheet Metal Fasteners工具套筒组件Socket Wrench Sets不锈钢链Stainless Steel Chains轭子T-Yoke轮胎链Tire Chains狗链Dog Chains喇叭头轭铁U-Yoke,T-Yoke For Speaker不锈钢输送带轮用轨道Stainless Wheel's Rack For Transporter工业用链Industrial Steel Link Chains拖链安全链Tow Chains And Safety Chains机车离合器零件Manufacture Of Motorcycle's Cvt Parts牙条棒Thread Rod。
万向铰链
Components for parallel kinematicsSeries GLK, GLAEJoints and struts form the core components of machinesparallel kinematics (PKM). Irrespective of the controltechnology possibilities, good mechanical characteristicsremain indispensable. These essentially determine theachievable rigidity and accuracy. INA PKM components wereorder to fulfil the requirements of the variousFor the flexible linkage of the struts to the machine frameworkand the platform, INA offers cardanic joints with two or threedegrees of freedom and ball joints whose design is matched tothe area of application; for machine tools, these are high rigidityand documented accuracy, while for handling equipment largeswivel angles and low mass are the primary requirements.The telescopic struts are now available as catalogue items intwo proven series with stroke length scales. Depending onapplication, either ball screw drives or planetary rollerscrews with various pitch values can be used.In short: the range offers improved cost-effectiveness forprecision movements through standardised sizes withnumerous degrees of freedom. Naturally, individual customersolutions can also be designed as before.541731 Market Information MAI 66Componentsfor parallel kinematicsBall jointswith three degrees of freedomCardanic jointswith two or three degrees of freedomGLK 2Telescopic struts34Basic load ratingsfor ball and cardanic jointsMaximum load carrying capacityThe maximum load carrying capacity P max of ball joints is shown in Figure 1.It depends on:I the size of the jointI the direction of the load (tensile/compressive load).Basic static load ratings for cardanic jointsThe basic static load ratings C 0 are shown in Figure 2.They depend on:I the type of joint I the swivel angle .The basic static load rating C 0 is only influenced by the swivel angle . The swivel angles ␣ and ␥ have no influence on the basic static load rating.Static load safety factorThe static load safety factor S 0 must be м 4! For other static load safety factors, INA must be consulted!max0the swivel angle Bearingsfor cardanic support56T elescopic strutsSeries GLAE1)Dependent on the adjacent construction. To be defined by the customer.2)Dependent on the joint type.3)Other sizes may be available by agreement.Dimension table · Dimensions in mm DesignationDiameter of sliding tube 3)Dimensions D 1D 2D 3D 4d 3 M A L min L 1L 2L 3Stroke length Spindle diameterл–0,015h8GLAE F-232220707013090120301)56ϫ22)941501)851)–6004011418001241950GLAE F-2364378080170130130451)56ϫ22)1380501)981)563900507Swivelling rotary/ Array cardanic jointswith two degrees of freedom Series GLK 2with three degrees of freedomSeries GLK 389Ball jointwith three degrees of freedom Series GLK1011Application example PKM machining centre107 466INA-Schaeffler KG91072 Herzogenaurach · Germany Internet E-Mail info@ In Germany:Telephone 0180/5003872Fax 0180/5003873From other countries:Telephone +49/9132/82-0Fax +49/9132/82-4950S ach -N r.005-299-462/M A I 66 G B -D 12021 · P r i n t e d i n G e r m a n y。
G902 G902-15 Cherry Lightweight Nut-Plate Rivete
Original InstructionsG902Cherry Lightweight Nut-Plate Riveter1224 East Warner Ave, Santa Ana, Ca 92705THE G902 / G902-15T A B L E O F C O N T E N T SDescription (1)Specifications for G902 / G902-15 (1)Safety Warnings (2)How to use G902 / G902-15 (2)Maintenance and Repair (2)Troubleshooting (2)Overhaul (3)Air Valve (3)Handle Sub-Assembly (3)Pulling Heads (3)Installing Pulling Heads (3)Cross Section Drawing Of G902 (4)Parts List for G902/G902-15 Riveters (5)Exploded View of G902 / G902-15 (6)Declaration of Conformity ...................................................................................................................................................Back CoverD E S C R I P T I O NThe G902 feed-through/G902-15 side-eject all pneumatic lightweight tools are designed specifically for the most efficient installation of blind rivets. Its durable, all metal housing makes this extremely robust tool ideal for use in rugged shop environments. This tool utilizes a straight pulling head which can install 3/32", 1/8’’ pull through type Nut-Plate and 3/32" CherryLock “A” rivets. Extensions are available for the G902 to allow the pulling heads to reach limited access areas.See the section on pulling heads for the correctpulling head part number.S P E C I F I C A T I O N S F O RG902/G902-15Cherry® Aerospace (CHERRY) policy is one ofcontinuous development. Specifications shown inthis document may be subject to change whichmay be introduced after publication. For the latestinformation always consult CHERRY®.AIR PRESSURE: 90 PSI to 110 PSI(6.2 bar to 7.6 bar)STROKE: 3/4 Inch (19 mm)PULLING FORCE: 550 Pounds (2.45 kN)@ 90 PSI (6.2 bar)CYCLE TIME: One Second approx.WEIGHT 2 Pounds (.91 kg)NOISE LEVEL 60 dB (A)VIBRATION: less than 2.5 m/s2AIR CONSUMPTION:05 SCF/Cycle (1.42 L/cycle)SAFETY WARNINGS•Operating this tool with a damaged or missing stem deflector, or using the deflector as a handle, may result in severe personal injury. Rotate the pin deflector until the aperture is facing away from the operator and other persons working in the vicinity. •Approved eye protection should be worn when operating, repairing, or overhauling this tool.•Do not use beyond the design intent.•Do not use substitute components for repair. Any modification to the tool, pulling heads, accessories or any component supplied by CHERRY®, or their representatives, shall be at the customer’s entire responsibility.CHERRY® will be pleased to advise on any proposed modification.•The tool must be maintained in a safe working condition at all times and examined at regular intervals for damage.•Before disassembling the tool for repair, refer to the maintenance instructions. All repairs shall be undertaken only by personnel trained by CHERRY®. Contact us with your training requirement.•Always disconnect the air line from the tool inlet before attempting to service, adjust, fit or remove any accessory.•Do not operate the tool when it is directed at any person.•Make sure the vent holes do not become blocked or covered and that air line hoses are always in good condition.•Do not operate the tool without the pulling head in place.•All retaining rings, screwed end caps, air fittings, trigger valves and pulling heads should be attached securely and examined at the end of each working shift•Do not pull rivet in the air.•The precautions to be used when using this tool must be explained by the customer to all operators. Any questions regarding the correct operation of the tool and operator safety should be directed to CHERRY®.•Do not pound on the rear of the tool head to force rivets into holes as this will damage the tool.HOW TO USE THE G902 / G902-15After selecting the proper pulling head and attaching it securely to the G902 or G902-15, connect the air line to the tool.Insert the rivet stem into the pulling head until the head of the rivet is in contact with the pulling head nosepiece; this will ensure full engagement between the jaws and the rivet stem and will prevent slippage.MAINTENANCE AND REPAIRThe G902 or G902-15 has been manufactured to give maximum service with minimum care.In order that this may be accomplished, the following recommendations should be followed:1. Keep excessive moisture and dirt out of air supply to prevent wear of air valve, air cylinder and air piston.2. Tool should be routinely inspected for damage or air leaks.3. Periodically tighten the threaded connection between the rear piston sub-assembly (14) and the front piston (11)(see instructions on page 3). A loose connection will result in an air leak and a loss of pulling force. TROUBLESHOOTING (see Parts List, page 5)1. Check for excessive air leakage from the air valve: If an O-ring on the valve stem (24) or on the valve sleeve (22) is worn or dam-aged, air will leak through the bottom of the handle at the exhaust port or at the front of the trigger valve.•If an O-ring (2) on valve sleeve (22) is worn or damaged, replace.•If an O-ring (23) on valve stem (24) is worn or damaged, replace.2. Check movement of the head piston rod (11). If it does not move freely or it is slow in operation:•O-rings (19), (17), (16), (12), (9), (2), (6), (2) and O-ring (17) for G902-15 may be damaged and require replacement.•Front and rear piston sub-assemblies (15 and 8) may be seized due to damaged parts and need replacement.•The Ø.094" (2.388 mm) vent holes on the side of main cylinder may be blocked or damaged; clean as necessary.3. Rivet stem sticks in the pulling head:•Pulling head needs maintenance. Disassemble the pulling head; clean and replace worn parts as needed.•Spent rivet stems are wedged inside the pistons. Disassemble the pulling head and remove jammed stems.OVERHAULThe disassembly and reassembly procedures can be accomplished by following the instructions below and the drawings on pages 4 & 6. Use extreme care during disassembly and reassembly not to mar, nick or burr any smooth surface that comes in contact with O-rings. Before installing O-rings, be sure to apply an O-ring lubricant. It is recommended that a special assembly tool, which can be ordered under part number 902-027, be used to overhaul this tool.AIR VALVE• Remove spring pin (21) by tapping it gently with a punch.• Remove the valve sub-assembly by pressing on trigger (27) from behind with both thumbs using the handle (20) for leverage, orpull and wiggle the trigger from the front. • Remove the set screw (28) from the trigger (27). • Disassemble the trigger (27) from valve stem (24). • Remove retaining ring (26).• Remove washer (25) from the counter bore of valve sleeve (22). • Pull valve stem (24) out from valve sleeve (22).HANDLE SUB-ASSEMBLY (see parts list)• Always remove the complete pulling head from the tool before attempting to dissemble the head assembly. Remove front cap sub-assembly (3) by unscrewing counterclockwise. • Remove deflector pin (31) and deflector fitting (30) (G902-15 model does not use these components). Insert a 3/16 hex wrenchthrough the back of the tool into the rear piston sub-assembly (14). • With hex wrench in place, locate the flats on the front piston rod (11). Use a 7/16 wrench, (for G902-15 model insert a pin in thecrossed drill hole of front piston rod (11)), to unscrew the front piston rod (11) by turning it counterclockwise.Note: Do not use Loctite TM when reassembling the front piston rod (11) to the rear piston sub-assembly (14); it would block the air passage. Instead, torque to about 90 in-lbs. • With the front piston rod (11) and front piston sub-assembly (3) out of the main housing, remove retaining ring (7) then push offthe front air piston sub-assembly (3) off of piston rod (11). • Remove retaining ring (10) from the main handle bore.• Use a 3/16 hex wrench to push out the rear piston sub-assembly (14) and bulk head (13).• Use plug wrench 902-027 and locate the two holes on the rear plug (18) inside the main handle bore. Unscrew the rear plug byturning the plug wrench counterclockwise.G902 / G902-15 PULLING HEADSINSTALLING H902-3NPR PULLING HEAD ON RIVETER1. Place jaws inside collet and place jaw follower in the collet against jaws. Then screw drawbar adapter onto the collet and tighten securely using wrenches on flats provided.2. Insert spring into head piston. Screw collet sub-assembly onto head piston and tighten securely using wrenches on flats provided.3. Thread tightly the proper nosepiece onto sleeve.C R O S S S E C T I O N O F G902PARTS LIST FOR THE G902 (902-15) NUT-PLATE RIVETER ASSEMBLY** NOT SOLD SEPARATELY.NOTE: ITEMS 29 TO 32 (P-880, 703A13, 530A16 AND 670A20) ARE NOT USED IN G902-15 TOOL.E X P L O D E D V I E W OF G902/G902-151224 East Warner Ave, Santa Ana, Ca 92705 Tel: 1-714-545-5511Fax: 1-714-850-6093 © 2007 Cherry AerospaceLOCTITE ® is a registered trademark of Henkel Corporation DEXRON ® is a registered trademark of GM corporation.PARKER ®is a trademark of Parker Hannifin CorporationLUBRRIPLATE ® is a trademark of Fiske Brothers Refining Co.TM-G902。
EntelliGuard 电子保护设备 Key Interlock Kit 介绍说明书
Introduction Key Interlock Kit:The breaker key lock is an optional accessory, which will keep the breaker in trip free state while locked. Maximum 4 keys of Ronis/Profalux or Kirk type can be used. All EntelliGuard Devices can be equipped with one of the three locks, that when fitted as indicated allow the use of one to four key locks that lock the device in its open position.Figure 1. (A) Front CoverDevices are found in two Variants: 1. Factory mounted mechanism:The breaker/device is supplied off works with all cams and screws allowing the user to mount a separately acquired GE type lock kit. 2. Field mountable device:A kit is supplied allowing the field mounting of the locking mechanism and allowing the use of a lock of the correct type purchased elsewhereCatalog Number:Installation of kitUse the following procedure to install the Key Interlock Key accessory into the circuit breaker.1. Turn the breaker off and discharge the closing springs by depressing the OFF and ON buttons in the sequence OFF-ON-OFF. Verify that the breaker OFF-ON indicator shows OFF and that the charge indicator shows DISCHARGE. If installing in a draw-out type breaker remove breaker from adaptor (cassette) before continuing.EntelliGuard ® G Circuit Breaker AccessoriesKey Interlock Kit Breaker MountedAVERTISSEMENT: Avant d’installer tout accessoire, mettre le disjoncteur en position OFF, le déconnecter de toute tension d’alimentation , et décharger les resorts d’armement2. Loosen the 6 screws on front cover (fascia) using a posidrive screw driver as shown in Fig 1.B Rotate the charging handle down and slide the front cover over the handle to remove the front cover as shown in Fig. 1.C.Figure 1. (B) Screw Removal (C) Handle Rotation3. If the locking mechanism device has been supplied factory fitted, remove the bracket and cover from the EntelliGuard device. If supplied asa field mountable kit, please proceed to step 4.4. Take the Lock cover and carefully break out the openings needed to place the required number of locks5. Fix each lock to the lock bracket using the fixation nuts as indicated in Fig. 2Figure 2. ing the nut supplied with each lock fix the activating CAM. Ensure that the CAM is positioned as indicated in fig. 3. For Kirk Lock, insert the spacer and fix the cam supplied with the Kit using the screws provided in the lock.Ronis lockProfalux lockKirk lockFigure 3.7. Using the supplied screws fit the cover onto the mechanism.Spacer8. Uninstall the Motor operator (Optional ifpresent), Grounding nut & Nylock nut as shown. Fig 4.Grounding nut Nylock nutFigure 4.9. Install adaptor nut and torque to 6Nm. Mount the support bracket on grounding stud andadaptor nut at other end. Secure support bracket with hardware removed/provided. Torque to 6Nm. Fig 5Install the Motor operator (if uninstalled) ReferDEH41413 for Motor operator installation.Support bracket Nylock nut Adaptor nutFigure 5.10. If the locking mechanism device has been supplied factory fitted. Remount the mechanism with its cover into the breaker, making sure that the operating lever moves freely and interacts correctly with the breaker mechanism. (Fig. 6)Figure 6.11. If supplied as a field mountable kit carefully remove the dummy lock cover from the Breaker. Mount the Lock mechanism with its cover into the breaker, making sure that the operating lever moves freely and interacts correctly with the breaker mechanism. (See Fig. 7A, 7B, 7C).Figure 7A.Figure 7B. Tighten to 6Nm (4.42ft-lbs)Figure 7C.Tighten to 6Nm (4.42ft-lbs)12. To reinstall the cover, rotate the charginghandle down and slide the front cover over thehandle to assemble the front cover to housing asshown in Fig. 8.14. Ensure the fascia is aligned properly with thetrip unit and the pad lock features of the breaker.Figure 8.15.Fasten the 6 mounting screws of fascia withthe housing using a pozidrive screwdriver. Applytorque of 6 Nm (4.42ft-lbs).Breaker key lock Operation:Use the following procedure to operate thepadlock:1. Depress the OFF pushbutton on the breakerfront Fascia and extend/pull the breaker padlocklever to its' outer position.2. With the padlock lever extended, rotate one ormore of the keys anticlockwise. The key can thenbe removed thus locking the breaker in its openposition.3. With padlock lever extended, insert the key androtate in clockwise to unlock.GE41 Woodford Ave, Plainville, CT 06062© 2009 General Electric Company。